#########################################################################
LIST_microblaze=" \
- suzaku \
ml401 \
+ suzaku \
xupv2p \
"
${LIST_sh4} \
"
+#########################################################################
+## SPARC Systems
+#########################################################################
+
+LIST_sparc="gr_xc3s_1500 gr_cpci_ax2000 gr_ep2s60 grsim grsim_leon2"
+
#-----------------------------------------------------------------------
#----- for now, just run PPC by default -----
case "$arg" in
arm|SA|ARM7|ARM9|ARM10|ARM11|ixp|pxa| \
avr32| \
+ sparc| \
blackfin| \
coldfire| \
microblaze| \
endif
ifeq ($(ARCH),sh)
CROSS_COMPILE = sh4-linux-
-endif # sh
+endif
+ifeq ($(ARCH),sparc)
+CROSS_COMPILE = sparc-elf-
+endif # sparc
endif # HOSTARCH,ARCH
endif # CROSS_COMPILE
@echo "#define CONFIG_R2DPLUS 1" >> include/config.h
@./mkconfig -a $(@:_config=) sh sh4 r2dplus
+#========================================================================
+# SPARC
+#========================================================================
+#########################################################################
+## LEON3
+#########################################################################
+
+# Gaisler GR-XC3S-1500 board
+gr_xc3s_1500_config : unconfig
+ @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
+
+# Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system
+gr_cpci_ax2000_config : unconfig
+ @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler
+
+# Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS
+# Development board Stratix II edition, FPGA Device EP2S60.
+gr_ep2s60_config: unconfig
+ @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler
+
+# Gaisler LEON3 GRSIM simulator
+grsim_config : unconfig
+ @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler
+
+#########################################################################
+## LEON2
+#########################################################################
+
+# Gaisler LEON2 GRSIM simulator
+grsim_leon2_config : unconfig
+ @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler
+
#########################################################################
#########################################################################
#########################################################################
- at32ap Files specific to Atmel AVR32 AP CPUs
- i386 Files specific to i386 CPUs
- ixp Files specific to Intel XScale IXP CPUs
+ - leon2 Files specific to Gaisler LEON2 SPARC CPU
+ - leon3 Files specific to Gaisler LEON3 SPARC CPU
- mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs
- mcf5227x Files specific to Freescale ColdFire MCF5227x CPUs
- mcf532x Files specific to Freescale ColdFire MCF5329 CPUs
- lib_mips Files generic to MIPS architecture
- lib_nios Files generic to NIOS architecture
- lib_ppc Files generic to PowerPC architecture
+- lib_sparc Files generic to SPARC architecture
- libfdt Library files to support flattened device trees
- net Networking code
- post Power On Self Test
--- /dev/null
+
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+
+#flash.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2008
+# Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# GR-CPCI-AX2000 board
+#
+
+# U-BOOT IN FLASH
+TEXT_BASE = 0x00000000
+
+# U-BOOT IN RAM or SDRAM with -nosram flag set when starting GRMON
+#TEXT_BASE = 0x40000000
+
+# U-BOOT IN SDRAM
+#TEXT_BASE = 0x60000000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Daniel Hellstrom, daniel@gaisler.com.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/leon.h>
+
+long int initdram(int board_type)
+{
+ return 1;
+}
+
+int checkboard(void)
+{
+ puts("Board: GR-CPCI-AX2000\n");
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ return 0;
+}
--- /dev/null
+/* Linker script for Gaisler Research AB's GR-CPCI-AX2000 board
+ * with template design.
+ *
+ * (C) Copyright 2008
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+OUTPUT_FORMAT("elf32-sparc", "elf32-sparc", "elf32-sparc")
+OUTPUT_ARCH(sparc)
+ENTRY(_start)
+SECTIONS
+{
+
+/* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+
+ .text : {
+ _load_addr = .;
+ _text = .;
+
+ *(.start)
+ cpu/leon3/start.o (.text)
+/* 8k is the same as the PROM offset from end of main memory, (CFG_PROM_SIZE) */
+ . = ALIGN(8192);
+/* PROM CODE, Will be relocated to the end of memory,
+ * no global data accesses please.
+ */
+ __prom_start = .;
+ *(.prom.pgt)
+ *(.prom.data)
+ *(.prom.text)
+ . = ALIGN(16);
+ __prom_end = .;
+ *(.text)
+ *(.fixup)
+ *(.gnu.warning)
+/* *(.got1)*/
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.*)
+ *(.eh_frame)
+ }
+ . = ALIGN(4);
+ _etext = .;
+
+ /* CMD Table */
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ . = ALIGN(4);
+ __u_boot_cmd_end = .;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.data.rel)
+ *(.data.rel.*)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = ALIGN(4);
+ __got_start = .;
+ .got : {
+ *(.got)
+/* *(.data.rel)
+ *(.data.rel.local)*/
+ . = ALIGN(16);
+ }
+ __got_end = .;
+
+/* .data.rel : { } */
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(16); /* to speed clearing of bss up */
+ }
+ __bss_end = . ;
+ _end = . ;
+ PROVIDE (end = .);
+
+/* Relocated into main memory */
+
+ /* Start of main memory */
+ /*. = 0x40000000;*/
+
+ .stack (NOLOAD) : { *(.stack) }
+
+ /* PROM CODE */
+
+ /* global data in RAM passed to kernel after booting */
+
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+
+}
--- /dev/null
+
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+
+#flash.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2008
+# Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Altera NIOS delopment board Stratix II edition, FPGA device EP2S60,
+# with GRLIB Template design (GPL Open Source SPARC/LEON3)
+#
+
+# U-BOOT IN FLASH
+TEXT_BASE = 0x00000000
+
+# U-BOOT IN SDRAM
+#TEXT_BASE = 0x40000000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
--- /dev/null
+/*
+ * (C) Copyright 2008
+ * Daniel Hellstrom, daniel@gaisler.com.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/leon.h>
+
+long int initdram(int board_type)
+{
+ return 1;
+}
+
+int checkboard(void)
+{
+ puts("Board: EP2S60 GRLIB\n");
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ return 0;
+}
--- /dev/null
+/* Linker script for Gaisler Research AB's Template design
+ * for Altera NIOS Development board Stratix II Edition, EP2S60 FPGA.
+ *
+ * (C) Copyright 2008
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+OUTPUT_FORMAT("elf32-sparc", "elf32-sparc", "elf32-sparc")
+OUTPUT_ARCH(sparc)
+ENTRY(_start)
+SECTIONS
+{
+
+/* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+
+ .text : {
+ _load_addr = .;
+ _text = .;
+
+ *(.start)
+ cpu/leon3/start.o (.text)
+/* 8k is the same as the PROM offset from end of main memory, (CFG_PROM_SIZE) */
+ . = ALIGN(8192);
+/* PROM CODE, Will be relocated to the end of memory,
+ * no global data accesses please.
+ */
+ __prom_start = .;
+ *(.prom.pgt)
+ *(.prom.data)
+ *(.prom.text)
+ . = ALIGN(16);
+ __prom_end = .;
+ *(.text)
+ *(.fixup)
+ *(.gnu.warning)
+/* *(.got1)*/
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.*)
+ *(.eh_frame)
+ }
+ . = ALIGN(4);
+ _etext = .;
+
+ /* CMD Table */
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ . = ALIGN(4);
+ __u_boot_cmd_end = .;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.data.rel)
+ *(.data.rel.*)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = ALIGN(4);
+ __got_start = .;
+ .got : {
+ *(.got)
+/* *(.data.rel)
+ *(.data.rel.local)*/
+ . = ALIGN(16);
+ }
+ __got_end = .;
+
+/* .data.rel : { } */
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(16); /* to speed clearing of bss up */
+ }
+ __bss_end = . ;
+ _end = . ;
+ PROVIDE (end = .);
+
+/* Relocated into main memory */
+
+ /* Start of main memory */
+ /*. = 0x40000000;*/
+
+ .stack (NOLOAD) : { *(.stack) }
+
+ /* PROM CODE */
+
+ /* global data in RAM passed to kernel after booting */
+
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+
+}
--- /dev/null
+
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+
+#flash.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2007
+# Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# GR-XC3S-1500 board
+#
+
+# U-BOOT IN FLASH
+TEXT_BASE = 0x00000000
+
+# U-BOOT IN RAM
+#TEXT_BASE = 0x40000000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
--- /dev/null
+/*
+ * (C) Copyright 2007
+ * Daniel Hellstrom, daniel@gaisler.com.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/leon.h>
+
+long int initdram(int board_type)
+{
+ return 1;
+}
+
+int checkboard(void)
+{
+ puts("Board: GR-XC3S-1500\n");
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ return 0;
+}
--- /dev/null
+/* Linker script for Gaisler Research AB's GR-XC3S-1500 board
+ * with template design.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+OUTPUT_FORMAT("elf32-sparc", "elf32-sparc", "elf32-sparc")
+OUTPUT_ARCH(sparc)
+ENTRY(_start)
+SECTIONS
+{
+
+/* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+
+ .text : {
+ _load_addr = .;
+ _text = .;
+
+ *(.start)
+ cpu/leon3/start.o (.text)
+/* 8k is the same as the PROM offset from end of main memory, (CFG_PROM_SIZE) */
+ . = ALIGN(8192);
+/* PROM CODE, Will be relocated to the end of memory,
+ * no global data accesses please.
+ */
+ __prom_start = .;
+ *(.prom.pgt)
+ *(.prom.data)
+ *(.prom.text)
+ . = ALIGN(16);
+ __prom_end = .;
+ *(.text)
+ *(.fixup)
+ *(.gnu.warning)
+/* *(.got1)*/
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.*)
+ *(.eh_frame)
+ }
+ . = ALIGN(4);
+ _etext = .;
+
+ /* CMD Table */
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ . = ALIGN(4);
+ __u_boot_cmd_end = .;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.data.rel)
+ *(.data.rel.*)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = ALIGN(4);
+ __got_start = .;
+ .got : {
+ *(.got)
+/* *(.data.rel)
+ *(.data.rel.local)*/
+ . = ALIGN(16);
+ }
+ __got_end = .;
+
+/* .data.rel : { } */
+
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(16); /* to speed clearing of bss up */
+ }
+ __bss_end = . ;
+ _end = . ;
+ PROVIDE (end = .);
+
+/* Relocated into main memory */
+
+ /* Start of main memory */
+ /*. = 0x40000000;*/
+
+ .stack (NOLOAD) : { *(.stack) }
+
+ /* PROM CODE */
+
+ /* global data in RAM passed to kernel after booting */
+
+
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+
+}
--- /dev/null
+#
+# (C) Copyright 2003-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2007
+# Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# GRSIM simulating a LEON3 GR-XC3S-1500 board
+#
+
+# U-BOOT IN FLASH
+TEXT_BASE = 0x00000000
+
+# U-BOOT IN RAM
+#TEXT_BASE = 0x40000000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
--- /dev/null
+/* GRSIM/TSIM board
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/leon.h>
+
+long int initdram(int board_type)
+{
+ return 1;
+}
+
+int checkboard(void)
+{
+ puts("Board: GRSIM/TSIM\n");
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ return 0;
+}
--- /dev/null
+/* Linker script for Gaisler Research AB's GRSIM LEON3 simulator.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+OUTPUT_FORMAT("elf32-sparc", "elf32-sparc", "elf32-sparc")
+OUTPUT_ARCH(sparc)
+ENTRY(_start)
+SECTIONS
+{
+
+/* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+
+ .text : {
+ _load_addr = .;
+ _text = .;
+
+ *(.start)
+ cpu/leon3/start.o (.text)
+/* 8k is the same as the PROM offset from end of main memory, (CFG_PROM_SIZE) */
+ . = ALIGN(8192);
+/* PROM CODE, Will be relocated to the end of memory,
+ * no global data accesses please.
+ */
+ __prom_start = .;
+ *(.prom.pgt)
+ *(.prom.data)
+ *(.prom.text)
+ . = ALIGN(16);
+ __prom_end = .;
+ *(.text)
+ *(.fixup)
+ *(.gnu.warning)
+/* *(.got1)*/
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.*)
+ *(.eh_frame)
+ }
+ . = ALIGN(4);
+ _etext = .;
+
+ /* CMD Table */
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ . = ALIGN(4);
+ __u_boot_cmd_end = .;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.data.rel)
+ *(.data.rel.*)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = ALIGN(4);
+ __got_start = .;
+ .got : {
+ *(.got)
+/* *(.data.rel)
+ *(.data.rel.local)*/
+ . = ALIGN(16);
+ }
+ __got_end = .;
+
+/* .data.rel : { } */
+
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(16); /* to speed clearing of bss up */
+ }
+ __bss_end = . ;
+ _end = . ;
+ PROVIDE (end = .);
+
+/* Relocated into main memory */
+
+ /* Start of main memory */
+ /*. = 0x40000000;*/
+
+ .stack (NOLOAD) : { *(.stack) }
+
+ /* PROM CODE */
+
+ /* global data in RAM passed to kernel after booting */
+
+
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+
+}
--- /dev/null
+#
+# (C) Copyright 2003-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2007
+# Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# GRSIM simulating a LEON2 board
+#
+
+# RUN U-BOOT FROM PROM
+TEXT_BASE = 0x00000000
+
+# RUN U-BOOT FROM RAM
+#TEXT_BASE = 0x40000000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
--- /dev/null
+/* GRSIM/TSIM board
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/leon.h>
+
+long int initdram(int board_type)
+{
+ return 1;
+}
+
+int checkboard(void)
+{
+ puts("Board: GRSIM/TSIM LEON2\n");
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ return 0;
+}
--- /dev/null
+/* Linker script for Gaisler Research AB's GRSIM LEON2 simulator.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+OUTPUT_FORMAT("elf32-sparc", "elf32-sparc", "elf32-sparc")
+OUTPUT_ARCH(sparc)
+ENTRY(_start)
+SECTIONS
+{
+
+/* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+
+ .text : {
+ _load_addr = .;
+ _text = .;
+
+ *(.start)
+ cpu/leon2/start.o (.text)
+/* 8k is the same as the PROM offset from end of main memory, (CFG_PROM_SIZE) */
+ . = ALIGN(8192);
+/* PROM CODE, Will be relocated to the end of memory,
+ * no global data accesses please.
+ */
+ __prom_start = .;
+ *(.prom.pgt)
+ *(.prom.data)
+ *(.prom.text)
+ . = ALIGN(16);
+ __prom_end = .;
+ *(.text)
+ *(.fixup)
+ *(.gnu.warning)
+/* *(.got1)*/
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.*)
+ *(.eh_frame)
+ }
+ . = ALIGN(4);
+ _etext = .;
+
+ /* CMD Table */
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ . = ALIGN(4);
+ __u_boot_cmd_end = .;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.data.rel)
+ *(.data.rel.*)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = ALIGN(4);
+ __got_start = .;
+ .got : {
+ *(.got)
+/* *(.data.rel)
+ *(.data.rel.local)*/
+ . = ALIGN(16);
+ }
+ __got_end = .;
+
+/* .data.rel : { } */
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(16); /* to speed clearing of bss up */
+ }
+ __bss_end = . ;
+ _end = . ;
+ PROVIDE (end = .);
+
+/* Relocated into main memory */
+
+ /* Start of main memory */
+ /*. = 0x40000000;*/
+
+ .stack (NOLOAD) : { *(.stack) }
+
+ /* PROM CODE */
+
+ /* global data in RAM passed to kernel after booting */
+
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+
+}
#
include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-$(shell mkdir -p $(obj)../xilinx_enet)
-endif
-
-INCS := -I../common -I../xilinx_enet
-CFLAGS += $(INCS)
-HOST_CFLAGS += $(INCS)
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o \
- ../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \
- ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
- ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \
- ../xilinx_enet/xemac_intr_dma.o ../common/xipif_v1_23_b.o \
- ../common/xbasic_types.o ../common/xdma_channel.o \
- ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \
- ../common/xversion.o \
+COBJS = $(BOARD).o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
#define XILINX_TIMER_IRQ 0
/* Uart pheriphery is RS232_Uart */
-#define XILINX_UART_BASEADDR 0x40600000
-#define XILINX_UART_BAUDRATE 115200
+#define XILINX_UARTLITE_BASEADDR 0x40600000
+#define XILINX_UARTLITE_BAUDRATE 115200
/* IIC pheriphery is IIC_EEPROM */
#define XILINX_IIC_0_BASEADDR 0x40800000
#define XILINX_SYSACE_MEM_WIDTH 16
/* Ethernet controller is Ethernet_MAC */
-#define XPAR_XEMAC_NUM_INSTANCES 1
-#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
-#define XPAR_OPB_ETHERNET_0_BASEADDR 0x40c00000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x40c0ffff
-#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
-#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
-#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
+#define XILINX_EMACLITE_BASEADDR 0x40C00000
#
include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-$(shell mkdir -p $(obj)../xilinx_enet)
-endif
-
-INCS := -I../common -I../xilinx_enet
-CFLAGS += $(INCS)
-HOST_CFLAGS += $(INCS)
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o \
- ../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \
- ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
- ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \
- ../xilinx_enet/xemac_intr_dma.o ../common/xipif_v1_23_b.o \
- ../common/xbasic_types.o ../common/xdma_channel.o \
- ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \
- ../common/xversion.o \
+COBJS = $(BOARD).o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
#define XILINX_TIMER_IRQ 1
/* Uart pheriphery is RS232_Uart_1 */
-#define XILINX_UART_BASEADDR 0x40600000
-#define XILINX_UART_BAUDRATE 115200
+#define XILINX_UARTLITE_BASEADDR 0x40600000
+#define XILINX_UARTLITE_BAUDRATE 115200
/* GPIO is LEDs_4Bit*/
#define XILINX_GPIO_BASEADDR 0x40000000
#define XILINX_SYSACE_MEM_WIDTH 16
/* Ethernet controller is Ethernet_MAC */
-#define XPAR_XEMAC_NUM_INSTANCES 1
-#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
-#define XPAR_OPB_ETHERNET_0_BASEADDR 0x40c00000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x40c0ffff
-#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
-#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
-#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
+#define XILINX_EMACLITE_BASEADDR 0x40C00000
COBJS-y += altera.o
COBJS-y += bedbug.o
COBJS-y += circbuf.o
+COBJS-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o
COBJS-y += cmd_autoscript.o
COBJS-$(CONFIG_CMD_BDI) += cmd_bdinfo.o
COBJS-$(CONFIG_CMD_BEDBUG) += cmd_bedbug.o
--- /dev/null
+/*
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * AMBA Plug&Play information list command
+ *
+ */
+#include <common.h>
+#include <command.h>
+#include <ambapp.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* We put these variables into .data section so that they are zero
+ * when entering the AMBA Plug & Play routines (in cpu/cpu/ambapp.c)
+ * the first time. BSS is not garantueed to be zero since BSS
+ * hasn't been cleared the first times entering the CPU AMBA functions.
+ *
+ * The AMBA PnP routines call these functions if ambapp_???_print is set.
+ *
+ */
+int ambapp_apb_print __attribute__ ((section(".data"))) = 0;
+int ambapp_ahb_print __attribute__ ((section(".data"))) = 0;
+
+typedef struct {
+ int device_id;
+ char *name;
+} ambapp_device_name;
+
+static ambapp_device_name gaisler_devices[] = {
+ {GAISLER_LEON3, "GAISLER_LEON3"},
+ {GAISLER_LEON3DSU, "GAISLER_LEON3DSU"},
+ {GAISLER_ETHAHB, "GAISLER_ETHAHB"},
+ {GAISLER_ETHMAC, "GAISLER_ETHMAC"},
+ {GAISLER_APBMST, "GAISLER_APBMST"},
+ {GAISLER_AHBUART, "GAISLER_AHBUART"},
+ {GAISLER_SRCTRL, "GAISLER_SRCTRL"},
+ {GAISLER_SDCTRL, "GAISLER_SDCTRL"},
+ {GAISLER_APBUART, "GAISLER_APBUART"},
+ {GAISLER_IRQMP, "GAISLER_IRQMP"},
+ {GAISLER_AHBRAM, "GAISLER_AHBRAM"},
+ {GAISLER_GPTIMER, "GAISLER_GPTIMER"},
+ {GAISLER_PCITRG, "GAISLER_PCITRG"},
+ {GAISLER_PCISBRG, "GAISLER_PCISBRG"},
+ {GAISLER_PCIFBRG, "GAISLER_PCIFBRG"},
+ {GAISLER_PCITRACE, "GAISLER_PCITRACE"},
+ {GAISLER_AHBTRACE, "GAISLER_AHBTRACE"},
+ {GAISLER_ETHDSU, "GAISLER_ETHDSU"},
+ {GAISLER_PIOPORT, "GAISLER_PIOPORT"},
+ {GAISLER_AHBJTAG, "GAISLER_AHBJTAG"},
+ {GAISLER_ATACTRL, "GAISLER_ATACTRL"},
+ {GAISLER_VGA, "GAISLER_VGA"},
+ {GAISLER_KBD, "GAISLER_KBD"},
+ {GAISLER_L2TIME, "GAISLER_L2TIME"},
+ {GAISLER_L2C, "GAISLER_L2C"},
+ {GAISLER_PLUGPLAY, "GAISLER_PLUGPLAY"},
+ {GAISLER_SPW, "GAISLER_SPW"},
+ {GAISLER_SPW2, "GAISLER_SPW2"},
+ {GAISLER_EHCI, "GAISLER_EHCI"},
+ {GAISLER_UHCI, "GAISLER_UHCI"},
+ {GAISLER_AHBSTAT, "GAISLER_AHBSTAT"},
+ {GAISLER_DDR2SPA, "GAISLER_DDR2SPA"},
+ {GAISLER_DDRSPA, "GAISLER_DDRSPA"},
+ {0, NULL}
+};
+
+static ambapp_device_name esa_devices[] = {
+ {ESA_LEON2, "ESA_LEON2"},
+ {ESA_MCTRL, "ESA_MCTRL"},
+ {0, NULL}
+};
+
+static ambapp_device_name opencores_devices[] = {
+ {OPENCORES_PCIBR, "OPENCORES_PCIBR"},
+ {OPENCORES_ETHMAC, "OPENCORES_ETHMAC"},
+ {0, NULL}
+};
+
+typedef struct {
+ unsigned int vendor_id;
+ char *name;
+ ambapp_device_name *devices;
+} ambapp_vendor_devnames;
+
+static ambapp_vendor_devnames vendors[] = {
+ {VENDOR_GAISLER, "VENDOR_GAISLER", gaisler_devices},
+ {VENDOR_ESA, "VENDOR_ESA", esa_devices},
+ {VENDOR_OPENCORES, "VENDOR_OPENCORES", opencores_devices},
+ {0, NULL, 0}
+};
+
+static char *ambapp_get_devname(ambapp_device_name * devs, int id)
+{
+ if (!devs)
+ return NULL;
+
+ while (devs->device_id > 0) {
+ if (devs->device_id == id)
+ return devs->name;
+ devs++;
+ }
+ return NULL;
+}
+
+char *ambapp_device_id2str(int vendor, int id)
+{
+ ambapp_vendor_devnames *ven = &vendors[0];
+
+ while (ven->vendor_id > 0) {
+ if (ven->vendor_id == vendor) {
+ return ambapp_get_devname(ven->devices, id);
+ }
+ ven++;
+ }
+ return NULL;
+}
+
+char *ambapp_vendor_id2str(int vendor)
+{
+ ambapp_vendor_devnames *ven = &vendors[0];
+
+ while (ven->vendor_id > 0) {
+ if (ven->vendor_id == vendor) {
+ return ven->name;
+ }
+ ven++;
+ }
+ return NULL;
+}
+
+static char *unknown = "unknown";
+
+/* Print one APB device */
+void ambapp_print_apb(apbctrl_pp_dev * apb, ambapp_ahbdev * apbmst, int index)
+{
+ char *dev_str, *ven_str;
+ int irq, ver, vendor, deviceid;
+ unsigned int address, apbmst_base, mask;
+
+ vendor = amba_vendor(apb->conf);
+ deviceid = amba_device(apb->conf);
+ irq = amba_irq(apb->conf);
+ ver = amba_ver(apb->conf);
+ apbmst_base = apbmst->address[0] & LEON3_IO_AREA;
+ address = (apbmst_base | (((apb->bar & 0xfff00000) >> 12))) &
+ (((apb->bar & 0x0000fff0) << 4) | 0xfff00000);
+
+ mask = amba_membar_mask(apb->bar) << 8;
+ mask = ((~mask) & 0x000fffff) + 1;
+
+ ven_str = ambapp_vendor_id2str(vendor);
+ if (!ven_str) {
+ ven_str = unknown;
+ dev_str = unknown;
+ } else {
+ dev_str = ambapp_device_id2str(vendor, deviceid);
+ if (!dev_str)
+ dev_str = unknown;
+ }
+
+ printf("0x%02x:0x%02x:0x%02x: %s %s\n"
+ " apb: 0x%08x - 0x%08x\n"
+ " irq: %-2d (ver: %-2d)\n",
+ index, vendor, deviceid, ven_str, dev_str, address,
+ address + mask, irq, ver);
+}
+
+void ambapp_print_ahb(ahbctrl_pp_dev * ahb, int index)
+{
+ char *dev_str, *ven_str;
+ int irq, ver, vendor, deviceid;
+ unsigned int addr, mask;
+ int j;
+
+ vendor = amba_vendor(ahb->conf);
+ deviceid = amba_device(ahb->conf);
+ irq = amba_irq(ahb->conf);
+ ver = amba_ver(ahb->conf);
+
+ ven_str = ambapp_vendor_id2str(vendor);
+ if (!ven_str) {
+ ven_str = unknown;
+ dev_str = unknown;
+ } else {
+ dev_str = ambapp_device_id2str(vendor, deviceid);
+ if (!dev_str)
+ dev_str = unknown;
+ }
+
+ printf("0x%02x:0x%02x:0x%02x: %s %s\n",
+ index, vendor, deviceid, ven_str, dev_str);
+
+ for (j = 0; j < 4; j++) {
+ addr = amba_membar_start(ahb->bars[j]);
+ if (amba_membar_type(ahb->bars[j]) == 0)
+ continue;
+ if (amba_membar_type(ahb->bars[j]) == AMBA_TYPE_AHBIO)
+ addr = AMBA_TYPE_AHBIO_ADDR(addr);
+ mask = amba_membar_mask(ahb->bars[j]) << 20;
+ printf(" mem: 0x%08x - 0x%08x\n", addr, addr + ((~mask) + 1));
+ }
+
+ printf(" irq: %-2d (ver: %d)\n", irq, ver);
+}
+
+int do_ambapp_print(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+
+ /* Print AHB Masters */
+ puts("--------- AHB Masters ---------\n");
+ ambapp_apb_print = 0;
+ ambapp_ahb_print = 1;
+ ambapp_ahbmst_count(99, 99); /* Get vendor&device 99 = nonexistent... */
+
+ /* Print AHB Slaves */
+ puts("--------- AHB Slaves ---------\n");
+ ambapp_ahbslv_count(99, 99); /* Get vendor&device 99 = nonexistent... */
+
+ /* Print APB Slaves */
+ puts("--------- APB Slaves ---------\n");
+ ambapp_apb_print = 1;
+ ambapp_ahb_print = 0;
+ ambapp_apb_count(99, 99); /* Get vendor&device 99 = nonexistent... */
+
+ /* Reset, no futher printing */
+ ambapp_apb_print = 0;
+ ambapp_ahb_print = 0;
+ puts("\n");
+ return 0;
+}
+
+int ambapp_init_reloc(void)
+{
+ ambapp_vendor_devnames *vend = vendors;
+ ambapp_device_name *dev;
+
+ while (vend->vendor_id && vend->name) {
+ vend->name = (char *)((unsigned int)vend->name + gd->reloc_off);
+ vend->devices =
+ (ambapp_device_name *) ((unsigned int)vend->devices +
+ gd->reloc_off);;
+ dev = vend->devices;
+ vend++;
+ if (!dev)
+ continue;
+ while (dev->device_id && dev->name) {
+ dev->name =
+ (char *)((unsigned int)dev->name + gd->reloc_off);;
+ dev++;
+ }
+ }
+ return 0;
+}
+
+U_BOOT_CMD(ambapp, 1, 1, do_ambapp_print,
+ "ambapp - list AMBA Plug&Play information\n",
+ "ambapp\n"
+ " - lists AMBA (AHB & APB) Plug&Play devices present on the system\n");
return 0;
}
+#elif defined(CONFIG_SPARC) /* SPARC */
+int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ bd_t *bd = gd->bd;
+#if defined(CONFIG_CMD_NET)
+ int i;
+#endif
+
+#ifdef DEBUG
+ print_num("bd address ", (ulong) bd);
+#endif
+ print_num("memstart ", bd->bi_memstart);
+ print_num("memsize ", bd->bi_memsize);
+ print_num("flashstart ", bd->bi_flashstart);
+ print_num("CFG_MONITOR_BASE ", CFG_MONITOR_BASE);
+ print_num("CFG_ENV_ADDR ", CFG_ENV_ADDR);
+ printf("CFG_RELOC_MONITOR_BASE = 0x%lx (%d)\n", CFG_RELOC_MONITOR_BASE,
+ CFG_MONITOR_LEN);
+ printf("CFG_MALLOC_BASE = 0x%lx (%d)\n", CFG_MALLOC_BASE,
+ CFG_MALLOC_LEN);
+ printf("CFG_INIT_SP_OFFSET = 0x%lx (%d)\n", CFG_INIT_SP_OFFSET,
+ CFG_STACK_SIZE);
+ printf("CFG_PROM_OFFSET = 0x%lx (%d)\n", CFG_PROM_OFFSET,
+ CFG_PROM_SIZE);
+ printf("CFG_GBL_DATA_OFFSET = 0x%lx (%d)\n", CFG_GBL_DATA_OFFSET,
+ CFG_GBL_DATA_SIZE);
+
+#if defined(CONFIG_CMD_NET)
+ puts("ethaddr =");
+ for (i = 0; i < 6; ++i) {
+ printf("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]);
+ }
+ puts("\nIP addr = ");
+ print_IPaddr(bd->bi_ip_addr);
+#endif
+ printf("\nbaudrate = %6ld bps\n", bd->bi_baudrate);
+ return 0;
+}
+
#elif defined(CONFIG_M68K) /* M68K */
static void print_str(const char *, const char *);
return 0;
}
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K)
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC)
/**
* boot_ramdisk_high - relocate init ramdisk
* @lmb: pointer to lmb handle, will be used for memory mgmt
--- /dev/null
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).a
+
+START = start.o
+SOBJS =
+COBJS = cpu_init.o serial.o cpu.o interrupts.o prom.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+$(START): $(START:.o=.S)
+ $(CC) -D__ASSEMBLY__ $(DBGFLAGS) $(OPTFLAGS) -D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \
+ -I$(TOPDIR)/include -fno-builtin -ffreestanding -nostdinc -isystem $(gccincdir) -pipe \
+ $(PLATFORM_CPPFLAGS) -Wall -Wstrict-prototypes \
+ -I$(TOPDIR)/board -c -o $(START) $(START:.o=.S)
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fPIC
+
+PLATFORM_CPPFLAGS += -DCONFIG_LEON
--- /dev/null
+/* CPU specific code for the LEON2 CPU
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void _reset_reloc(void);
+
+int checkcpu(void)
+{
+ /* check LEON version here */
+ printf("CPU: LEON2\n");
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+void cpu_reset(void)
+{
+ /* Interrupts off */
+ disable_interrupts();
+
+ /* jump to restart in flash */
+ _reset_reloc();
+}
+
+int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ cpu_reset();
+
+ return 1;
+}
+
+/* ------------------------------------------------------------------------- */
--- /dev/null
+/* Initializes CPU and basic hardware such as memory
+ * controllers, IRQ controller and system timer 0.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/asi.h>
+#include <asm/leon.h>
+
+#include <config.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* reset CPU (jump to 0, without reset) */
+void start(void);
+
+struct {
+ gd_t gd_area;
+ bd_t bd;
+} global_data;
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers.
+ *
+ * Run from FLASH/PROM:
+ * - until memory controller is set up, only registers avaiable
+ * - no global variables available for writing
+ * - constants avaiable
+ */
+
+void cpu_init_f(void)
+{
+ LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+
+ /* initialize the IRQMP */
+ leon2->Interrupt_Force = 0;
+ leon2->Interrupt_Pending = 0;
+ leon2->Interrupt_Clear = 0xfffe; /* clear all old pending interrupts */
+ leon2->Interrupt_Mask = 0xfffe0000; /* mask all IRQs */
+
+ /* cache */
+
+ /* I/O port setup */
+#ifdef LEON2_IO_PORT_DIR
+ leon2->PIO_Direction = LEON2_IO_PORT_DIR;
+#endif
+#ifdef LEON2_IO_PORT_DATA
+ leon2->PIO_Data = LEON2_IO_PORT_DATA;
+#endif
+#ifdef LEON2_IO_PORT_INT
+ leon2->PIO_Interrupt = LEON2_IO_PORT_INT;
+#else
+ leon2->PIO_Interrupt = 0;
+#endif
+}
+
+void cpu_init_f2(void)
+{
+
+}
+
+/*
+ * initialize higher level parts of CPU like time base and timers
+ */
+int cpu_init_r(void)
+{
+ LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+
+ /* initialize prescaler common to all timers to 1MHz */
+ leon2->Scaler_Counter = leon2->Scaler_Reload =
+ (((CONFIG_SYS_CLK_FREQ / 1000) + 500) / 1000) - 1;
+
+ return (0);
+}
+
+/* Uses Timer 0 to get accurate
+ * pauses. Max 2 raised to 32 ticks
+ *
+ */
+void cpu_wait_ticks(unsigned long ticks)
+{
+ unsigned long start = get_timer(0);
+ while (get_timer(start) < ticks) ;
+}
+
+/* initiate and setup timer0 interrupt to 1MHz
+ * Return irq number for timer int or a negative number for
+ * dealing with self
+ */
+int timer_interrupt_init_cpu(void)
+{
+ LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+
+ /* 1ms ticks */
+ leon2->Timer_Counter_1 = 0;
+ leon2->Timer_Reload_1 = 999; /* (((1000000 / 100) - 1)) */
+ leon2->Timer_Control_1 =
+ (LEON2_TIMER_CTRL_EN | LEON2_TIMER_CTRL_RS | LEON2_TIMER_CTRL_LD);
+
+ return LEON2_TIMER1_IRQNO;
+}
+
+/*
+ * This function is intended for SHORT delays only.
+ */
+unsigned long cpu_usec2ticks(unsigned long usec)
+{
+ /* timer set to 1kHz ==> 1 clk tick = 1 msec */
+ if (usec < 1000)
+ return 1;
+ return (usec / 1000);
+}
+
+unsigned long cpu_ticks2usec(unsigned long ticks)
+{
+ /* 1tick = 1usec */
+ return ticks * 1000;
+}
--- /dev/null
+/*
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
+ *
+ * (C) Copyright 2006
+ * Detlev Zundel, DENX Software Engineering, dzu@denx.de
+ *
+ * (C) Copyright -2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/stack.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <asm/irq.h>
+
+#include <asm/leon.h>
+
+/* 15 normal irqs and a non maskable interrupt */
+#define NR_IRQS 15
+
+struct irq_action {
+ interrupt_handler_t *handler;
+ void *arg;
+ unsigned int count;
+};
+
+static struct irq_action irq_handlers[NR_IRQS] = { {0}, };
+static int spurious_irq_cnt = 0;
+static int spurious_irq = 0;
+
+static inline unsigned int leon2_get_irqmask(unsigned int irq)
+{
+ if ((irq < 0) || (irq >= NR_IRQS)) {
+ return 0;
+ } else {
+ return (1 << irq);
+ }
+}
+
+static void leon2_ic_disable(unsigned int irq)
+{
+ unsigned int mask, pil;
+ LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+
+ pil = intLock();
+
+ /* get mask of interrupt */
+ mask = leon2_get_irqmask(irq);
+
+ /* set int level */
+ leon2->Interrupt_Mask =
+ SPARC_NOCACHE_READ(&leon2->Interrupt_Mask) & (~mask);
+
+ intUnlock(pil);
+}
+
+static void leon2_ic_enable(unsigned int irq)
+{
+ unsigned int mask, pil;
+ LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+
+ pil = intLock();
+
+ /* get mask of interrupt */
+ mask = leon2_get_irqmask(irq);
+
+ /* set int level */
+ leon2->Interrupt_Mask =
+ SPARC_NOCACHE_READ(&leon2->Interrupt_Mask) | mask;
+
+ intUnlock(pil);
+}
+
+void handler_irq(int irq, struct pt_regs *regs)
+{
+ if (irq_handlers[irq].handler) {
+ if (((unsigned int)irq_handlers[irq].handler > CFG_RAM_END) ||
+ ((unsigned int)irq_handlers[irq].handler < CFG_RAM_BASE)
+ ) {
+ printf("handler_irq: bad handler: %x, irq number %d\n",
+ (unsigned int)irq_handlers[irq].handler, irq);
+ return;
+ }
+ irq_handlers[irq].handler(irq_handlers[irq].arg);
+ irq_handlers[irq].count++;
+ } else {
+ spurious_irq_cnt++;
+ spurious_irq = irq;
+ }
+}
+
+void leon2_force_int(int irq)
+{
+ LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+
+ if ((irq >= NR_IRQS) || (irq < 0))
+ return;
+ printf("Forcing interrupt %d\n", irq);
+
+ leon2->Interrupt_Force =
+ SPARC_NOCACHE_READ(&leon2->Interrupt_Force) | (1 << irq);
+}
+
+/****************************************************************************/
+
+int interrupt_init_cpu(void)
+{
+ return (0);
+}
+
+/****************************************************************************/
+
+/* Handle Timer 0 IRQ */
+void timer_interrupt_cpu(void *arg)
+{
+ LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+
+ leon2->Timer_Control_1 =
+ (LEON2_TIMER_CTRL_EN | LEON2_TIMER_CTRL_RS | LEON2_TIMER_CTRL_LD);
+
+ /* nothing to do here */
+ return;
+}
+
+/****************************************************************************/
+
+/*
+ * Install and free a interrupt handler.
+ */
+
+void irq_install_handler(int irq, interrupt_handler_t * handler, void *arg)
+{
+ if (irq < 0 || irq >= NR_IRQS) {
+ printf("irq_install_handler: bad irq number %d\n", irq);
+ return;
+ }
+
+ if (irq_handlers[irq].handler != NULL)
+ printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
+ (ulong) handler, (ulong) irq_handlers[irq].handler);
+
+ if (((unsigned int)handler > CFG_RAM_END) ||
+ ((unsigned int)handler < CFG_RAM_BASE)
+ ) {
+ printf("irq_install_handler: bad handler: %x, irq number %d\n",
+ (unsigned int)handler, irq);
+ return;
+ }
+ irq_handlers[irq].handler = handler;
+ irq_handlers[irq].arg = arg;
+
+ /* enable irq on LEON2 hardware */
+ leon2_ic_enable(irq);
+
+}
+
+void irq_free_handler(int irq)
+{
+ if (irq < 0 || irq >= NR_IRQS) {
+ printf("irq_free_handler: bad irq number %d\n", irq);
+ return;
+ }
+
+ /* disable irq on LEON2 hardware */
+ leon2_ic_disable(irq);
+
+ irq_handlers[irq].handler = NULL;
+ irq_handlers[irq].arg = NULL;
+}
+
+/****************************************************************************/
+
+#if defined(CONFIG_CMD_IRQ)
+void do_irqinfo(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
+{
+ int irq;
+ unsigned int pil = get_pil();
+ printf("PIL level: %u\n\r", pil);
+ printf("Spurious IRQ: %u, last unknown IRQ: %d\n",
+ spurious_irq_cnt, spurious_irq);
+
+ puts("\nInterrupt-Information:\n" "Nr Routine Arg Count\n");
+
+ for (irq = 0; irq < NR_IRQS; irq++) {
+ if (irq_handlers[irq].handler != NULL) {
+ printf("%02d %08lx %08lx %ld\n", irq,
+ (unsigned int)irq_handlers[irq].handler,
+ (unsigned int)irq_handlers[irq].arg,
+ irq_handlers[irq].count);
+ }
+ }
+}
+#endif
--- /dev/null
+/* prom.c - emulates a sparc v0 PROM for the linux kernel.
+ *
+ * Copyright (C) 2003 Konrad Eisele <eiselekd@web.de>
+ * Copyright (C) 2004 Stefan Holst <mail@s-holst.de>
+ * Copyright (C) 2007 Daniel Hellstrom <daniel@gaisler.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/prom.h>
+#include <asm/machines.h>
+#include <asm/srmmu.h>
+#include <asm/processor.h>
+#include <asm/irq.h>
+#include <asm/leon.h>
+
+#include <config.h>
+/*
+#define PRINT_ROM_VEC
+*/
+extern struct linux_romvec *kernel_arg_promvec;
+
+#define PROM_PGT __attribute__ ((__section__ (".prom.pgt")))
+#define PROM_TEXT __attribute__ ((__section__ (".prom.text")))
+#define PROM_DATA __attribute__ ((__section__ (".prom.data")))
+
+/* for __va */
+extern int __prom_start;
+#define PAGE_OFFSET 0xf0000000
+#define phys_base CFG_SDRAM_BASE
+#define PROM_OFFS 8192
+#define PROM_SIZE_MASK (PROM_OFFS-1)
+#define __va(x) ( \
+ (void *)( ((unsigned long)(x))-PROM_OFFS+ \
+ (CFG_PROM_OFFSET-phys_base)+PAGE_OFFSET-TEXT_BASE ) \
+ )
+#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CFG_PROM_OFFSET-TEXT_BASE))
+
+struct property {
+ char *name;
+ char *value;
+ int length;
+};
+
+struct node {
+ int level;
+ struct property *properties;
+};
+
+static void leon_reboot(char *bcommand);
+static void leon_halt(void);
+static int leon_nbputchar(int c);
+static int leon_nbgetchar(void);
+
+static int no_nextnode(int node);
+static int no_child(int node);
+static int no_proplen(int node, char *name);
+static int no_getprop(int node, char *name, char *value);
+static int no_setprop(int node, char *name, char *value, int len);
+static char *no_nextprop(int node, char *name);
+
+static struct property PROM_TEXT *find_property(int node, char *name);
+static int PROM_TEXT leon_strcmp(const char *s1, const char *s2);
+static void *PROM_TEXT leon_memcpy(void *dest, const void *src, size_t n);
+static void PROM_TEXT leon_reboot_physical(char *bcommand);
+
+void __inline__ leon_flush_cache_all(void)
+{
+ __asm__ __volatile__(" flush ");
+ __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"::"i"(ASI_DFLUSH):"memory");
+}
+
+void __inline__ leon_flush_tlb_all(void)
+{
+ leon_flush_cache_all();
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(0x400),
+ "i"(ASI_MMUFLUSH):"memory");
+}
+
+typedef struct {
+ unsigned int ctx_table[256];
+ unsigned int pgd_table[256];
+} sparc_srmmu_setup;
+
+sparc_srmmu_setup srmmu_tables PROM_PGT = {
+ {0},
+ {0x1e,
+ 0x10001e,
+ 0x20001e,
+ 0x30001e,
+ 0x40001e,
+ 0x50001e,
+ 0x60001e,
+ 0x70001e,
+ 0x80001e,
+ 0x90001e,
+ 0xa0001e,
+ 0xb0001e,
+ 0xc0001e,
+ 0xd0001e,
+ 0xe0001e,
+ 0xf0001e,
+ 0x100001e,
+ 0x110001e,
+ 0x120001e,
+ 0x130001e,
+ 0x140001e,
+ 0x150001e,
+ 0x160001e,
+ 0x170001e,
+ 0x180001e,
+ 0x190001e,
+ 0x1a0001e,
+ 0x1b0001e,
+ 0x1c0001e,
+ 0x1d0001e,
+ 0x1e0001e,
+ 0x1f0001e,
+ 0x200001e,
+ 0x210001e,
+ 0x220001e,
+ 0x230001e,
+ 0x240001e,
+ 0x250001e,
+ 0x260001e,
+ 0x270001e,
+ 0x280001e,
+ 0x290001e,
+ 0x2a0001e,
+ 0x2b0001e,
+ 0x2c0001e,
+ 0x2d0001e,
+ 0x2e0001e,
+ 0x2f0001e,
+ 0x300001e,
+ 0x310001e,
+ 0x320001e,
+ 0x330001e,
+ 0x340001e,
+ 0x350001e,
+ 0x360001e,
+ 0x370001e,
+ 0x380001e,
+ 0x390001e,
+ 0x3a0001e,
+ 0x3b0001e,
+ 0x3c0001e,
+ 0x3d0001e,
+ 0x3e0001e,
+ 0x3f0001e,
+ 0x400001e,
+ 0x410001e,
+ 0x420001e,
+ 0x430001e,
+ 0x440001e,
+ 0x450001e,
+ 0x460001e,
+ 0x470001e,
+ 0x480001e,
+ 0x490001e,
+ 0x4a0001e,
+ 0x4b0001e,
+ 0x4c0001e,
+ 0x4d0001e,
+ 0x4e0001e,
+ 0x4f0001e,
+ 0x500001e,
+ 0x510001e,
+ 0x520001e,
+ 0x530001e,
+ 0x540001e,
+ 0x550001e,
+ 0x560001e,
+ 0x570001e,
+ 0x580001e,
+ 0x590001e,
+ 0x5a0001e,
+ 0x5b0001e,
+ 0x5c0001e,
+ 0x5d0001e,
+ 0x5e0001e,
+ 0x5f0001e,
+ 0x600001e,
+ 0x610001e,
+ 0x620001e,
+ 0x630001e,
+ 0x640001e,
+ 0x650001e,
+ 0x660001e,
+ 0x670001e,
+ 0x680001e,
+ 0x690001e,
+ 0x6a0001e,
+ 0x6b0001e,
+ 0x6c0001e,
+ 0x6d0001e,
+ 0x6e0001e,
+ 0x6f0001e,
+ 0x700001e,
+ 0x710001e,
+ 0x720001e,
+ 0x730001e,
+ 0x740001e,
+ 0x750001e,
+ 0x760001e,
+ 0x770001e,
+ 0x780001e,
+ 0x790001e,
+ 0x7a0001e,
+ 0x7b0001e,
+ 0x7c0001e,
+ 0x7d0001e,
+ 0x7e0001e,
+ 0x7f0001e,
+ 0x800001e,
+ 0x810001e,
+ 0x820001e,
+ 0x830001e,
+ 0x840001e,
+ 0x850001e,
+ 0x860001e,
+ 0x870001e,
+ 0x880001e,
+ 0x890001e,
+ 0x8a0001e,
+ 0x8b0001e,
+ 0x8c0001e,
+ 0x8d0001e,
+ 0x8e0001e,
+ 0x8f0001e,
+ 0x900001e,
+ 0x910001e,
+ 0x920001e,
+ 0x930001e,
+ 0x940001e,
+ 0x950001e,
+ 0x960001e,
+ 0x970001e,
+ 0x980001e,
+ 0x990001e,
+ 0x9a0001e,
+ 0x9b0001e,
+ 0x9c0001e,
+ 0x9d0001e,
+ 0x9e0001e,
+ 0x9f0001e,
+ 0xa00001e,
+ 0xa10001e,
+ 0xa20001e,
+ 0xa30001e,
+ 0xa40001e,
+ 0xa50001e,
+ 0xa60001e,
+ 0xa70001e,
+ 0xa80001e,
+ 0xa90001e,
+ 0xaa0001e,
+ 0xab0001e,
+ 0xac0001e,
+ 0xad0001e,
+ 0xae0001e,
+ 0xaf0001e,
+ 0xb00001e,
+ 0xb10001e,
+ 0xb20001e,
+ 0xb30001e,
+ 0xb40001e,
+ 0xb50001e,
+ 0xb60001e,
+ 0xb70001e,
+ 0xb80001e,
+ 0xb90001e,
+ 0xba0001e,
+ 0xbb0001e,
+ 0xbc0001e,
+ 0xbd0001e,
+ 0xbe0001e,
+ 0xbf0001e,
+ 0xc00001e,
+ 0xc10001e,
+ 0xc20001e,
+ 0xc30001e,
+ 0xc40001e,
+ 0xc50001e,
+ 0xc60001e,
+ 0xc70001e,
+ 0xc80001e,
+ 0xc90001e,
+ 0xca0001e,
+ 0xcb0001e,
+ 0xcc0001e,
+ 0xcd0001e,
+ 0xce0001e,
+ 0xcf0001e,
+ 0xd00001e,
+ 0xd10001e,
+ 0xd20001e,
+ 0xd30001e,
+ 0xd40001e,
+ 0xd50001e,
+ 0xd60001e,
+ 0xd70001e,
+ 0xd80001e,
+ 0xd90001e,
+ 0xda0001e,
+ 0xdb0001e,
+ 0xdc0001e,
+ 0xdd0001e,
+ 0xde0001e,
+ 0xdf0001e,
+ 0xe00001e,
+ 0xe10001e,
+ 0xe20001e,
+ 0xe30001e,
+ 0xe40001e,
+ 0xe50001e,
+ 0xe60001e,
+ 0xe70001e,
+ 0xe80001e,
+ 0xe90001e,
+ 0xea0001e,
+ 0xeb0001e,
+ 0xec0001e,
+ 0xed0001e,
+ 0xee0001e,
+ 0xef0001e,
+ 0x400001e /* default */
+ }
+};
+
+/* a self contained prom info structure */
+struct leon_reloc_func {
+ struct property *(*find_property) (int node, char *name);
+ int (*strcmp) (char *s1, char *s2);
+ void *(*memcpy) (void *dest, const void *src, size_t n);
+ void (*reboot_physical) (char *cmd);
+};
+
+struct leon_prom_info {
+ int freq_khz;
+ int leon_nctx;
+ int mids[32];
+ int baudrates[2];
+ struct leon_reloc_func reloc_funcs;
+ struct property root_properties[4];
+ struct property cpu_properties[7];
+#undef CPUENTRY
+#define CPUENTRY(idx) struct property cpu_properties##idx[4]
+ CPUENTRY(1);
+ CPUENTRY(2);
+ CPUENTRY(3);
+ CPUENTRY(4);
+ CPUENTRY(5);
+ CPUENTRY(6);
+ CPUENTRY(7);
+ CPUENTRY(8);
+ CPUENTRY(9);
+ CPUENTRY(10);
+ CPUENTRY(11);
+ CPUENTRY(12);
+ CPUENTRY(13);
+ CPUENTRY(14);
+ CPUENTRY(15);
+ CPUENTRY(16);
+ CPUENTRY(17);
+ CPUENTRY(18);
+ CPUENTRY(19);
+ CPUENTRY(20);
+ CPUENTRY(21);
+ CPUENTRY(22);
+ CPUENTRY(23);
+ CPUENTRY(24);
+ CPUENTRY(25);
+ CPUENTRY(26);
+ CPUENTRY(27);
+ CPUENTRY(28);
+ CPUENTRY(29);
+ CPUENTRY(30);
+ CPUENTRY(31);
+ struct idprom idprom;
+ struct linux_nodeops nodeops;
+ struct linux_mlist_v0 *totphys_p;
+ struct linux_mlist_v0 totphys;
+ struct linux_mlist_v0 *avail_p;
+ struct linux_mlist_v0 avail;
+ struct linux_mlist_v0 *prommap_p;
+ void (*synchook) (void);
+ struct linux_arguments_v0 *bootargs_p;
+ struct linux_arguments_v0 bootargs;
+ struct linux_romvec romvec;
+ struct node nodes[35];
+ char s_device_type[12];
+ char s_cpu[4];
+ char s_mid[4];
+ char s_idprom[7];
+ char s_compatability[14];
+ char s_leon2[6];
+ char s_mmu_nctx[9];
+ char s_frequency[16];
+ char s_uart1_baud[11];
+ char s_uart2_baud[11];
+ char arg[256];
+};
+
+/* static prom info */
+static struct leon_prom_info PROM_DATA spi = {
+ CONFIG_SYS_CLK_FREQ / 1000,
+ 256,
+ {
+#undef CPUENTRY
+#define CPUENTRY(idx) idx
+ CPUENTRY(0),
+ CPUENTRY(1),
+ CPUENTRY(2),
+ CPUENTRY(3),
+ CPUENTRY(4),
+ CPUENTRY(5),
+ CPUENTRY(6),
+ CPUENTRY(7),
+ CPUENTRY(8),
+ CPUENTRY(9),
+ CPUENTRY(10),
+ CPUENTRY(11),
+ CPUENTRY(12),
+ CPUENTRY(13),
+ CPUENTRY(14),
+ CPUENTRY(15),
+ CPUENTRY(16),
+ CPUENTRY(17),
+ CPUENTRY(18),
+ CPUENTRY(19),
+ CPUENTRY(20),
+ CPUENTRY(21),
+ CPUENTRY(22),
+ CPUENTRY(23),
+ CPUENTRY(24),
+ CPUENTRY(25),
+ CPUENTRY(26),
+ CPUENTRY(27),
+ CPUENTRY(28),
+ CPUENTRY(29),
+ CPUENTRY(30),
+ 31},
+ {38400, 38400},
+ {
+ __va(find_property),
+ __va(leon_strcmp),
+ __va(leon_memcpy),
+ __phy(leon_reboot_physical),
+ },
+ {
+ {__va(spi.s_device_type), __va(spi.s_idprom), 4},
+ {__va(spi.s_idprom), (char *)__va(&spi.idprom), sizeof(struct idprom)},
+ {__va(spi.s_compatability), __va(spi.s_leon2), 5},
+ {NULL, NULL, -1}
+ },
+ {
+ {__va(spi.s_device_type), __va(spi.s_cpu), 4},
+ {__va(spi.s_mid), __va(&spi.mids[0]), 4},
+ {__va(spi.s_mmu_nctx), (char *)__va(&spi.leon_nctx), 4},
+ {__va(spi.s_frequency), (char *)__va(&spi.freq_khz), 4},
+ {__va(spi.s_uart1_baud), (char *)__va(&spi.baudrates[0]), 4},
+ {__va(spi.s_uart2_baud), (char *)__va(&spi.baudrates[1]), 4},
+ {NULL, NULL, -1}
+ },
+#undef CPUENTRY
+#define CPUENTRY(idx) \
+ { /* cpu_properties */ \
+ {__va(spi.s_device_type), __va(spi.s_cpu), 4}, \
+ {__va(spi.s_mid), __va(&spi.mids[idx]), 4}, \
+ {__va(spi.s_frequency), (char *)__va(&spi.freq_khz), 4}, \
+ {NULL, NULL, -1} \
+ }
+ CPUENTRY(1),
+ CPUENTRY(2),
+ CPUENTRY(3),
+ CPUENTRY(4),
+ CPUENTRY(5),
+ CPUENTRY(6),
+ CPUENTRY(7),
+ CPUENTRY(8),
+ CPUENTRY(9),
+ CPUENTRY(10),
+ CPUENTRY(11),
+ CPUENTRY(12),
+ CPUENTRY(13),
+ CPUENTRY(14),
+ CPUENTRY(15),
+ CPUENTRY(16),
+ CPUENTRY(17),
+ CPUENTRY(18),
+ CPUENTRY(19),
+ CPUENTRY(20),
+ CPUENTRY(21),
+ CPUENTRY(22),
+ CPUENTRY(23),
+ CPUENTRY(24),
+ CPUENTRY(25),
+ CPUENTRY(26),
+ CPUENTRY(27),
+ CPUENTRY(28),
+ CPUENTRY(29),
+ CPUENTRY(30),
+ CPUENTRY(31),
+ {
+ 0x01, /* format */
+ M_LEON2 | M_LEON2_SOC, /* machine type */
+ {0, 0, 0, 0, 0, 0}, /* eth */
+ 0, /* date */
+ 0, /* sernum */
+ 0, /* checksum */
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} /* reserved */
+ },
+ {
+ __va(no_nextnode),
+ __va(no_child),
+ __va(no_proplen),
+ __va(no_getprop),
+ __va(no_setprop),
+ __va(no_nextprop)
+ },
+ __va(&spi.totphys),
+ {
+ NULL,
+ (char *)CFG_SDRAM_BASE,
+ 0,
+ },
+ __va(&spi.avail),
+ {
+ NULL,
+ (char *)CFG_SDRAM_BASE,
+ 0,
+ },
+ NULL, /* prommap_p */
+ NULL,
+ __va(&spi.bootargs),
+ {
+ {NULL, __va(spi.arg), NULL /*... */ },
+ /*... */
+ },
+ {
+ 0,
+ 0, /* sun4c v0 prom */
+ 0, 0,
+ {__va(&spi.totphys_p), __va(&spi.prommap_p), __va(&spi.avail_p)},
+ __va(&spi.nodeops),
+ NULL, {NULL /* ... */ },
+ NULL, NULL,
+ NULL, NULL, /* pv_getchar, pv_putchar */
+ __va(leon_nbgetchar), __va(leon_nbputchar),
+ NULL,
+ __va(leon_reboot),
+ NULL,
+ NULL,
+ NULL,
+ __va(leon_halt),
+ __va(&spi.synchook),
+ {NULL},
+ __va(&spi.bootargs_p)
+ /*... */
+ },
+ {
+ {0, __va(spi.root_properties + 3) /* NULL, NULL, -1 */ },
+ {0, __va(spi.root_properties)},
+ /* cpu 0, must be spi.nodes[2] see leon_prom_init() */
+ {1, __va(spi.cpu_properties)},
+
+#undef CPUENTRY
+#define CPUENTRY(idx) \
+ {1, __va(spi.cpu_properties##idx) } /* cpu <idx> */
+ CPUENTRY(1),
+ CPUENTRY(2),
+ CPUENTRY(3),
+ CPUENTRY(4),
+ CPUENTRY(5),
+ CPUENTRY(6),
+ CPUENTRY(7),
+ CPUENTRY(8),
+ CPUENTRY(9),
+ CPUENTRY(10),
+ CPUENTRY(11),
+ CPUENTRY(12),
+ CPUENTRY(13),
+ CPUENTRY(14),
+ CPUENTRY(15),
+ CPUENTRY(16),
+ CPUENTRY(17),
+ CPUENTRY(18),
+ CPUENTRY(19),
+ CPUENTRY(20),
+ CPUENTRY(21),
+ CPUENTRY(22),
+ CPUENTRY(23),
+ CPUENTRY(24),
+ CPUENTRY(25),
+ CPUENTRY(26),
+ CPUENTRY(27),
+ CPUENTRY(28),
+ CPUENTRY(29),
+ CPUENTRY(30),
+ CPUENTRY(31),
+ {-1, __va(spi.root_properties + 3) /* NULL, NULL, -1 */ }
+ },
+ "device_type",
+ "cpu",
+ "mid",
+ "idprom",
+ "compatability",
+ "leon2",
+ "mmu-nctx",
+ "clock-frequency",
+ "uart1_baud",
+ "uart2_baud",
+ CONFIG_DEFAULT_KERNEL_COMMAND_LINE
+};
+
+/* from arch/sparc/kernel/setup.c */
+#define RAMDISK_LOAD_FLAG 0x4000
+extern unsigned short root_flags;
+extern unsigned short root_dev;
+extern unsigned short ram_flags;
+extern unsigned int sparc_ramdisk_image;
+extern unsigned int sparc_ramdisk_size;
+extern int root_mountflags;
+
+extern char initrd_end, initrd_start;
+
+/* Reboot the CPU = jump to beginning of flash again.
+ *
+ * Make sure that all function are inlined here.
+ */
+static void PROM_TEXT leon_reboot(char *bcommand)
+{
+ register char *arg = bcommand;
+ void __attribute__ ((noreturn)) (*reboot_physical) (char *cmd);
+
+ /* get physical address */
+ struct leon_prom_info *pspi =
+ (void *)(CFG_PROM_OFFSET + sizeof(srmmu_tables));
+
+ unsigned int *srmmu_ctx_table;
+
+ /* Turn of Interrupts */
+ set_pil(0xf);
+
+ /* Set kernel's context, context zero */
+ srmmu_set_context(0);
+
+ /* Get physical address of the MMU shutdown routine */
+ reboot_physical = (void *)
+ SPARC_BYPASS_READ(&pspi->reloc_funcs.reboot_physical);
+
+ /* Now that we know the physical address of the function
+ * we can make the MMU allow jumping to it.
+ */
+ srmmu_ctx_table = (unsigned int *)srmmu_get_ctable_ptr();
+
+ srmmu_ctx_table = (unsigned int *)SPARC_BYPASS_READ(srmmu_ctx_table);
+
+ /* get physical address of kernel's context table (assume ptd) */
+ srmmu_ctx_table = (unsigned int *)
+ (((unsigned int)srmmu_ctx_table & 0xfffffffc) << 4);
+
+ /* enable access to physical address of MMU shutdown function */
+ SPARC_BYPASS_WRITE(&srmmu_ctx_table
+ [((unsigned int)reboot_physical) >> 24],
+ (((unsigned int)reboot_physical & 0xff000000) >> 4) |
+ 0x1e);
+
+ /* flush TLB cache */
+ leon_flush_tlb_all();
+
+ /* flash instruction & data cache */
+ sparc_icache_flush_all();
+ sparc_dcache_flush_all();
+
+ /* jump to physical address function
+ * so that when the MMU is disabled
+ * we can continue to execute
+ */
+ reboot_physical(arg);
+}
+
+static void PROM_TEXT leon_reboot_physical(char *bcommand)
+{
+ void __attribute__ ((noreturn)) (*reset) (void);
+
+ /* Turn off MMU */
+ srmmu_set_mmureg(0);
+
+ /* Hardcoded start address */
+ reset = CFG_MONITOR_BASE;
+
+ /* flush data cache */
+ sparc_dcache_flush_all();
+
+ /* flush instruction cache */
+ sparc_icache_flush_all();
+
+ /* Jump to start in Flash */
+ reset();
+}
+
+static void PROM_TEXT leon_halt(void)
+{
+ while (1) ;
+}
+
+/* get single char, don't care for blocking*/
+static int PROM_TEXT leon_nbgetchar(void)
+{
+ return -1;
+}
+
+/* put single char, don't care for blocking*/
+static int PROM_TEXT leon_nbputchar(int c)
+{
+ LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+
+ /***** put char in buffer... ***********
+ * Make sure all functions are inline! *
+ ***************************************/
+
+ /* Wait for last character to go. */
+ while (!(SPARC_BYPASS_READ(&leon2->UART_Status_1)
+ & LEON2_UART_STAT_THE)) ;
+
+ /* Send data */
+ SPARC_BYPASS_WRITE(&leon2->UART_Channel_1, c);
+
+ /* Wait for data to be sent */
+ while (!(SPARC_BYPASS_READ(&leon2->UART_Status_1)
+ & LEON2_UART_STAT_TSE)) ;
+
+ return 0;
+}
+
+/* node ops */
+
+/*#define nodes ((struct node *)__va(&pspi->nodes))*/
+#define nodes ((struct node *)(pspi->nodes))
+
+static int PROM_TEXT no_nextnode(int node)
+{
+ /* get physical address */
+ struct leon_prom_info *pspi =
+ (void *)(CFG_PROM_OFFSET + sizeof(srmmu_tables));
+
+ /* convert into virtual address */
+ pspi = (struct leon_prom_info *)
+ (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
+
+ if (nodes[node].level == nodes[node + 1].level)
+ return node + 1;
+ return -1;
+}
+
+static int PROM_TEXT no_child(int node)
+{
+ /* get physical address */
+ struct leon_prom_info *pspi = (struct leon_prom_info *)
+ (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+
+ /* convert into virtual address */
+ pspi = (struct leon_prom_info *)
+ (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
+
+ if (nodes[node].level == nodes[node + 1].level - 1)
+ return node + 1;
+ return -1;
+}
+
+static struct property PROM_TEXT *find_property(int node, char *name)
+{
+ /* get physical address */
+ struct leon_prom_info *pspi = (struct leon_prom_info *)
+ (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+
+ /* convert into virtual address */
+ pspi = (struct leon_prom_info *)
+ (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
+
+ struct property *prop = &nodes[node].properties[0];
+ while (prop && prop->name) {
+ if (pspi->reloc_funcs.strcmp(prop->name, name) == 0)
+ return prop;
+ prop++;
+ }
+ return NULL;
+}
+
+static int PROM_TEXT no_proplen(int node, char *name)
+{
+ /* get physical address */
+ struct leon_prom_info *pspi = (struct leon_prom_info *)
+ (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+
+ /* convert into virtual address */
+ pspi = (struct leon_prom_info *)
+ (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
+
+ struct property *prop = pspi->reloc_funcs.find_property(node, name);
+ if (prop)
+ return prop->length;
+ return -1;
+}
+
+static int PROM_TEXT no_getprop(int node, char *name, char *value)
+{
+ /* get physical address */
+ struct leon_prom_info *pspi = (struct leon_prom_info *)
+ (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+
+ /* convert into virtual address */
+ pspi = (struct leon_prom_info *)
+ (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
+
+ struct property *prop = pspi->reloc_funcs.find_property(node, name);
+ if (prop) {
+ pspi->reloc_funcs.memcpy(value, prop->value, prop->length);
+ return 1;
+ }
+ return -1;
+}
+
+static int PROM_TEXT no_setprop(int node, char *name, char *value, int len)
+{
+ return -1;
+}
+
+static char PROM_TEXT *no_nextprop(int node, char *name)
+{
+ /* get physical address */
+ struct leon_prom_info *pspi = (struct leon_prom_info *)
+ (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+ struct property *prop;
+
+ /* convert into virtual address */
+ pspi = (struct leon_prom_info *)
+ (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
+
+ if (!name || !name[0])
+ return nodes[node].properties[0].name;
+
+ prop = pspi->reloc_funcs.find_property(node, name);
+ if (prop)
+ return prop[1].name;
+ return NULL;
+}
+
+static int PROM_TEXT leon_strcmp(const char *s1, const char *s2)
+{
+ register char result;
+
+ while (1) {
+ result = *s1 - *s2;
+ if (result || !*s1)
+ break;
+ s2++;
+ s1++;
+ }
+
+ return result;
+}
+
+static void *PROM_TEXT leon_memcpy(void *dest, const void *src, size_t n)
+{
+ char *dst = (char *)dest, *source = (char *)src;
+
+ while (n--) {
+ *dst = *source;
+ dst++;
+ source++;
+ }
+ return dest;
+}
+
+#define GETREGSP(sp) __asm__ __volatile__("mov %%sp, %0" : "=r" (sp))
+
+void leon_prom_init(struct leon_prom_info *pspi)
+{
+ unsigned long i;
+ unsigned char cksum, *ptr;
+ char *addr_str, *end;
+ unsigned long sp;
+ GETREGSP(sp);
+
+ pspi->freq_khz = CONFIG_SYS_CLK_FREQ / 1000;
+
+ /* Set Available main memory size */
+ pspi->totphys.num_bytes = CFG_PROM_OFFSET - CFG_SDRAM_BASE;
+ pspi->avail.num_bytes = pspi->totphys.num_bytes;
+
+#undef nodes
+ pspi->nodes[3].level = -1;
+ pspi->nodes[3].properties = __va(spi.root_properties + 3);
+
+ /* Set Ethernet MAC address from environment */
+ if ((addr_str = getenv("ethaddr")) != NULL) {
+ for (i = 0; i < 6; i++) {
+ pspi->idprom.id_ethaddr[i] = addr_str ?
+ simple_strtoul(addr_str, &end, 16) : 0;
+ if (addr_str) {
+ addr_str = (*end) ? end + 1 : end;
+ }
+ }
+ } else {
+ /* HW Address not found in environment,
+ * Set default HW address
+ */
+ pspi->idprom.id_ethaddr[0] = 0;
+ pspi->idprom.id_ethaddr[1] = 0;
+ pspi->idprom.id_ethaddr[2] = 0;
+ pspi->idprom.id_ethaddr[3] = 0;
+ pspi->idprom.id_ethaddr[4] = 0;
+ pspi->idprom.id_ethaddr[5] = 0;
+ }
+
+ ptr = (unsigned char *)&pspi->idprom;
+ for (i = cksum = 0; i <= 0x0E; i++)
+ cksum ^= *ptr++;
+ pspi->idprom.id_cksum = cksum;
+}
+
+static inline void set_cache(unsigned long regval)
+{
+ asm volatile ("sta %0, [%%g0] %1\n\t":: "r" (regval), "i"(2):"memory");
+}
+
+extern unsigned short bss_start, bss_end;
+
+/* mark as section .img.main.text, to be referenced in linker script */
+int prom_init(void)
+{
+ struct leon_prom_info *pspi = (void *)
+ ((((unsigned int)&spi) & PROM_SIZE_MASK) + CFG_PROM_OFFSET);
+
+ /* disable mmu */
+ srmmu_set_mmureg(0x00000000);
+ __asm__ __volatile__("flush\n\t");
+
+ /* init prom info struct */
+ leon_prom_init(pspi);
+
+ kernel_arg_promvec = &pspi->romvec;
+#ifdef PRINT_ROM_VEC
+ printf("Kernel rom vec: 0x%lx\n", (unsigned int)(&pspi->romvec));
+#endif
+ return 0;
+}
+
+/* Copy current kernel boot argument to ROMvec */
+void prepare_bootargs(char *bootargs)
+{
+ struct leon_prom_info *pspi;
+ char *src, *dst;
+ int left;
+
+ /* if no bootargs set, skip copying ==> default bootline */
+ if (bootargs && (*bootargs != '\0')) {
+ pspi = (void *)((((unsigned int)&spi) & PROM_SIZE_MASK) +
+ CFG_PROM_OFFSET);
+ src = bootargs;
+ dst = &pspi->arg[0];
+ left = 255; /* max len */
+ while (*src && left > 0) {
+ *dst++ = *src++;
+ left--;
+ }
+ /* terminate kernel command line string */
+ *dst = 0;
+ }
+}
+
+void srmmu_init_cpu(unsigned int entry)
+{
+ sparc_srmmu_setup *psrmmu_tables = (void *)
+ ((((unsigned int)&srmmu_tables) & PROM_SIZE_MASK) +
+ CFG_PROM_OFFSET);
+
+ /* Make context 0 (kernel's context) point
+ * to our prepared memory mapping
+ */
+#define PTD 1
+ psrmmu_tables->ctx_table[0] =
+ ((unsigned int)&psrmmu_tables->pgd_table[0x00]) >> 4 | PTD;
+
+ /* Set virtual kernel address 0xf0000000
+ * to SRAM/SDRAM address.
+ * Make it READ/WRITE/EXEC to SuperUser
+ */
+#define PTE 2
+#define ACC_SU_ALL 0x1c
+ psrmmu_tables->pgd_table[0xf0] =
+ (CFG_SDRAM_BASE >> 4) | ACC_SU_ALL | PTE;
+ psrmmu_tables->pgd_table[0xf1] =
+ ((CFG_SDRAM_BASE + 0x1000000) >> 4) | ACC_SU_ALL | PTE;
+ psrmmu_tables->pgd_table[0xf2] =
+ ((CFG_SDRAM_BASE + 0x2000000) >> 4) | ACC_SU_ALL | PTE;
+ psrmmu_tables->pgd_table[0xf3] =
+ ((CFG_SDRAM_BASE + 0x3000000) >> 4) | ACC_SU_ALL | PTE;
+ psrmmu_tables->pgd_table[0xf4] =
+ ((CFG_SDRAM_BASE + 0x4000000) >> 4) | ACC_SU_ALL | PTE;
+ psrmmu_tables->pgd_table[0xf5] =
+ ((CFG_SDRAM_BASE + 0x5000000) >> 4) | ACC_SU_ALL | PTE;
+ psrmmu_tables->pgd_table[0xf6] =
+ ((CFG_SDRAM_BASE + 0x6000000) >> 4) | ACC_SU_ALL | PTE;
+ psrmmu_tables->pgd_table[0xf7] =
+ ((CFG_SDRAM_BASE + 0x7000000) >> 4) | ACC_SU_ALL | PTE;
+
+ /* convert rom vec pointer to virtual address */
+ kernel_arg_promvec = (struct linux_romvec *)
+ (((unsigned int)kernel_arg_promvec & 0x0fffffff) | 0xf0000000);
+
+ /* Set Context pointer to point to context table
+ * 256 contexts supported.
+ */
+ srmmu_set_ctable_ptr((unsigned int)&psrmmu_tables->ctx_table[0]);
+
+ /* Set kernel's context, context zero */
+ srmmu_set_context(0);
+
+ /* Invalidate all Cache */
+ __asm__ __volatile__("flush\n\t");
+
+ srmmu_set_mmureg(0x00000001);
+ leon_flush_tlb_all();
+ leon_flush_cache_all();
+}
--- /dev/null
+/* GRLIB APBUART Serial controller driver
+ *
+ * (C) Copyright 2008
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/leon.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Force cache miss each time a serial controller reg is read */
+#define CACHE_BYPASS 1
+
+#ifdef CACHE_BYPASS
+#define READ_BYTE(var) SPARC_NOCACHE_READ_BYTE((unsigned int)&(var))
+#define READ_HWORD(var) SPARC_NOCACHE_READ_HWORD((unsigned int)&(var))
+#define READ_WORD(var) SPARC_NOCACHE_READ((unsigned int)&(var))
+#define READ_DWORD(var) SPARC_NOCACHE_READ_DWORD((unsigned int)&(var))
+#endif
+
+int serial_init(void)
+{
+ LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+ LEON2_Uart_regs *regs;
+ unsigned int tmp;
+
+ /* Init LEON2 UART
+ *
+ * Set scaler / baud rate
+ *
+ * Receiver & transmitter enable
+ */
+#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
+ regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1;
+#else
+ regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2;
+#endif
+
+ regs->UART_Scaler = CFG_LEON2_UART1_SCALER;
+
+ /* Let bit 11 be unchanged (debug bit for GRMON) */
+ tmp = READ_WORD(regs->UART_Control);
+
+ regs->UART_Control = ((tmp & LEON2_UART_CTRL_DBG) |
+ (LEON2_UART1_LOOPBACK_ENABLE << 7) |
+ (LEON2_UART1_FLOWCTRL_ENABLE << 6) |
+ (LEON2_UART1_PARITY_ENABLE << 5) |
+ (LEON2_UART1_ODDPAR_ENABLE << 4) |
+ LEON2_UART_CTRL_RE | LEON2_UART_CTRL_TE);
+
+ return 0;
+}
+
+void serial_putc(const char c)
+{
+ if (c == '\n')
+ serial_putc_raw('\r');
+
+ serial_putc_raw(c);
+}
+
+void serial_putc_raw(const char c)
+{
+ LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+ LEON2_Uart_regs *regs;
+
+#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
+ regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1;
+#else
+ regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2;
+#endif
+
+ /* Wait for last character to go. */
+ while (!(READ_WORD(regs->UART_Status) & LEON2_UART_STAT_THE)) ;
+
+ /* Send data */
+ regs->UART_Channel = c;
+
+#ifdef LEON_DEBUG
+ /* Wait for data to be sent */
+ while (!(READ_WORD(regs->UART_Status) & LEON2_UART_STAT_TSE)) ;
+#endif
+}
+
+void serial_puts(const char *s)
+{
+ while (*s) {
+ serial_putc(*s++);
+ }
+}
+
+int serial_getc(void)
+{
+ LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+ LEON2_Uart_regs *regs;
+
+#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
+ regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1;
+#else
+ regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2;
+#endif
+
+ /* Wait for a character to arrive. */
+ while (!(READ_WORD(regs->UART_Status) & LEON2_UART_STAT_DR)) ;
+
+ /* read data */
+ return READ_WORD(regs->UART_Channel);
+}
+
+int serial_tstc(void)
+{
+ LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+ LEON2_Uart_regs *regs;
+
+#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
+ regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1;
+#else
+ regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2;
+#endif
+
+ return (READ_WORD(regs->UART_Status) & LEON2_UART_STAT_DR);
+}
+
+/* set baud rate for uart */
+void serial_setbrg(void)
+{
+ /* update baud rate settings, read it from gd->baudrate */
+ unsigned int scaler;
+ LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
+ LEON2_Uart_regs *regs;
+
+#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
+ regs = (LEON2_Uart_regs *) & leon2->UART_Channel_1;
+#else
+ regs = (LEON2_Uart_regs *) & leon2->UART_Channel_2;
+#endif
+
+ if (gd->baudrate > 0) {
+ scaler =
+ (((CONFIG_SYS_CLK_FREQ * 10) / (gd->baudrate * 8)) -
+ 5) / 10;
+ regs->UART_Scaler = scaler;
+ }
+}
--- /dev/null
+/* This is where the SPARC/LEON3 starts
+ * Copyright (C) 2007,
+ * Daniel Hellstrom, daniel@gaisler.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/asmmacro.h>
+#include <asm/winmacro.h>
+#include <asm/psr.h>
+#include <asm/stack.h>
+#include <asm/leon.h>
+#include <version.h>
+
+/* Entry for traps which jump to a programmer-specified trap handler. */
+#define TRAPR(H) \
+ wr %g0, 0xfe0, %psr; \
+ mov %g0, %tbr; \
+ ba (H); \
+ mov %g0, %wim;
+
+#define TRAP(H) \
+ mov %psr, %l0; \
+ ba (H); \
+ nop; nop;
+
+#define TRAPI(ilevel) \
+ mov ilevel, %l7; \
+ mov %psr, %l0; \
+ b _irq_entry; \
+ mov %wim, %l3
+
+/* Unexcpected trap will halt the processor by forcing it to error state */
+#undef BAD_TRAP
+#define BAD_TRAP ta 0; nop; nop; nop;
+
+/* Software trap. Treat as BAD_TRAP for the time being... */
+#define SOFT_TRAP TRAP(_hwerr)
+
+#define PSR_INIT 0x1FC0 /* Disable traps, set s and ps */
+#define WIM_INIT 2
+
+/* All traps low-level code here must end with this macro. */
+#define RESTORE_ALL b ret_trap_entry; clr %l6;
+
+#define WRITE_PAUSE nop;nop;nop
+
+WINDOWSIZE = (16 * 4)
+ARGPUSHSIZE = (6 * 4)
+ARGPUSH = (WINDOWSIZE + 4)
+MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4)
+
+/* Number of register windows */
+#ifndef CFG_SPARC_NWINDOWS
+#error Must define number of SPARC register windows, default is 8
+#endif
+
+#define STACK_ALIGN 8
+#define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1))
+
+ .section ".start", "ax"
+ .globl _start, start, _trap_table
+ .globl _irq_entry, nmi_trap
+ .globl _reset_reloc
+
+/* at address 0
+ * Hardware traps
+ */
+start:
+_start:
+_trap_table:
+ TRAPR(_hardreset); ! 00 reset trap
+ BAD_TRAP; ! 01 instruction_access_exception
+ BAD_TRAP; ! 02 illegal_instruction
+ BAD_TRAP; ! 03 priveleged_instruction
+ BAD_TRAP; ! 04 fp_disabled
+ TRAP(_window_overflow); ! 05 window_overflow
+ TRAP(_window_underflow); ! 06 window_underflow
+ BAD_TRAP; ! 07 Memory Address Not Aligned
+ BAD_TRAP; ! 08 Floating Point Exception
+ BAD_TRAP; ! 09 Data Miss Exception
+ BAD_TRAP; ! 0a Tagged Instruction Ovrflw
+ BAD_TRAP; ! 0b Watchpoint Detected
+ BAD_TRAP; ! 0c
+ BAD_TRAP; ! 0d
+ BAD_TRAP; ! 0e
+ BAD_TRAP; ! 0f
+ BAD_TRAP; ! 10
+ TRAPI(1); ! 11 IRQ level 1
+ TRAPI(2); ! 12 IRQ level 2
+ TRAPI(3); ! 13 IRQ level 3
+ TRAPI(4); ! 14 IRQ level 4
+ TRAPI(5); ! 15 IRQ level 5
+ TRAPI(6); ! 16 IRQ level 6
+ TRAPI(7); ! 17 IRQ level 7
+ TRAPI(8); ! 18 IRQ level 8
+ TRAPI(9); ! 19 IRQ level 9
+ TRAPI(10); ! 1a IRQ level 10
+ TRAPI(11); ! 1b IRQ level 11
+ TRAPI(12); ! 1c IRQ level 12
+ TRAPI(13); ! 1d IRQ level 13
+ TRAPI(14); ! 1e IRQ level 14
+ TRAP(_nmi_trap); ! 1f IRQ level 15 /
+ ! NMI (non maskable interrupt)
+ BAD_TRAP; ! 20 r_register_access_error
+ BAD_TRAP; ! 21 instruction access error
+ BAD_TRAP; ! 22
+ BAD_TRAP; ! 23
+ BAD_TRAP; ! 24 co-processor disabled
+ BAD_TRAP; ! 25 uniplemented FLUSH
+ BAD_TRAP; ! 26
+ BAD_TRAP; ! 27
+ BAD_TRAP; ! 28 co-processor exception
+ BAD_TRAP; ! 29 data access error
+ BAD_TRAP; ! 2a division by zero
+ BAD_TRAP; ! 2b data store error
+ BAD_TRAP; ! 2c data access MMU miss
+ BAD_TRAP; ! 2d
+ BAD_TRAP; ! 2e
+ BAD_TRAP; ! 2f
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 30-33
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 34-37
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 38-3b
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 3c-3f
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 40-43
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 44-47
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 48-4b
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 4c-4f
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 50-53
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 54-57
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 58-5b
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 5c-5f
+
+ /* implementaion dependent */
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 60-63
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 64-67
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 68-6b
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 6c-6f
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 70-73
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 74-77
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 78-7b
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 7c-7f
+
+ /* Software traps, not handled */
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 80-83
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 84-87
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 88-8b
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 8c-8f
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 90-93
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 94-97
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 98-9b
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 9c-9f
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a0-a3
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a4-a7
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a8-ab
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! ac-af
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b0-b3
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b4-b7
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b8-bb
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! bc-bf
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c0-c3
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c4-c7
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c8-cb
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! cc-cf
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d0-d3
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d4-d7
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d8-db
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! dc-df
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e0-e3
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e4-e7
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e8-eb
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! ec-ef
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f0-f3
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f4-f7
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f8-fb
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! fc-ff
+/*
+ * Version string
+ */
+
+ .data
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", __DATE__, " - ", __TIME__, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
+
+ .section ".text"
+ .align 4
+
+_hardreset:
+1000:
+ flush
+ nop
+ nop
+ nop
+
+ /* Init Cache */
+ set (LEON2_PREGS+LEON_REG_CACHECTRL_OFFSET), %g1
+ set 0x0081000f, %g2
+ st %g2, [%g1]
+
+ mov %g0, %y
+ clr %g1
+ clr %g2
+ clr %g3
+ clr %g4
+ clr %g5
+ clr %g6
+ clr %g7
+
+ mov %asr17, %g3
+ and %g3, 0x1f, %g3
+clear_window:
+ mov %g0, %l0
+ mov %g0, %l1
+ mov %g0, %l2
+ mov %g0, %l3
+ mov %g0, %l4
+ mov %g0, %l5
+ mov %g0, %l6
+ mov %g0, %l7
+ mov %g0, %o0
+ mov %g0, %o1
+ mov %g0, %o2
+ mov %g0, %o3
+ mov %g0, %o4
+ mov %g0, %o5
+ mov %g0, %o6
+ mov %g0, %o7
+ subcc %g3, 1, %g3
+ bge clear_window
+ save
+
+leon2_init:
+ /* LEON2 Register Base in g1 */
+ set LEON2_PREGS, %g1
+
+leon2_init_cache:
+ /* Set Cache control register */
+ set 0x1000f, %g2
+ st %g2, [%g1 + 0x14]
+
+leon2_init_clear:
+
+ /* Clear LEON2 registers */
+ st %g0, [%g1 + LEON2_ECTRL]
+ st %g0, [%g1 + LEON2_IMASK]
+ st %g0, [%g1 + LEON2_IPEND]
+ st %g0, [%g1 + LEON2_IFORCE]
+ st %g0, [%g1 + LEON2_ICLEAR]
+ st %g0, [%g1 + LEON2_IOREG]
+ st %g0, [%g1 + LEON2_IODIR]
+ st %g0, [%g1 + LEON2_IOICONF]
+ st %g0, [%g1 + LEON2_UCTRL0]
+ st %g0, [%g1 + LEON2_UCTRL1]
+
+leon2_init_ioport:
+ /* I/O port initialization */
+ set 0xaa00, %g2
+ st %g2, [%g1 + LEON2_IOREG]
+
+leon2_init_mctrl:
+
+ /* memory config register 1 */
+ set CFG_GRLIB_MEMCFG1, %g2
+ ld [%g1], %g3 !
+ and %g3, 0x300, %g3
+ or %g2, %g3, %g2
+ st %g2, [%g1 + LEON2_MCFG1]
+ set CFG_GRLIB_MEMCFG2, %g2 ! Load memory config register 2
+#if !( defined(TSIM) || !defined(BZIMAGE))
+ st %g2, [%g1 + LEON2_MCFG2] ! only for prom version, else done by "dumon -i"
+#endif
+ set CFG_GRLIB_MEMCFG3, %g2 ! Init FT register
+ st %g2, [%g1 + LEON2_ECTRL]
+ ld [%g1 + LEON2_ECTRL], %g2
+ srl %g2, 30, %g2
+ andcc %g2, 3, %g6
+ bne,a leon2_init_wim
+ mov %g0, %asr16 ! clear err_reg
+
+leon2_init_wim:
+ set WIM_INIT, %g3
+ mov %g3, %wim
+
+leon2_init_psr:
+ set 0x1000, %g3
+ mov %psr, %g2
+ wr %g2, %g3, %psr
+ nop
+ nop
+ nop
+
+leon2_init_stackp:
+ set CFG_INIT_SP_OFFSET, %fp
+ andn %fp, 0x0f, %fp
+ sub %fp, 64, %sp
+
+cpu_init_unreloc:
+ call cpu_init_f
+ nop
+
+/* un relocated start address of monitor */
+#define TEXT_START _text
+
+/* un relocated end address of monitor */
+#define DATA_END __init_end
+
+reloc:
+ set TEXT_START,%g2
+ set DATA_END,%g3
+ set CFG_RELOC_MONITOR_BASE,%g4
+reloc_loop:
+ ldd [%g2],%l0
+ ldd [%g2+8],%l2
+ std %l0,[%g4]
+ std %l2,[%g4+8]
+ inc 16,%g2
+ subcc %g3,%g2,%g0
+ bne reloc_loop
+ inc 16,%g4
+
+ clr %l0
+ clr %l1
+ clr %l2
+ clr %l3
+ clr %g2
+
+/* register g4 contain address to start
+ * This means that BSS must be directly after data and code segments
+ *
+ * g3 is length of bss = (__bss_end-__bss_start)
+ *
+ */
+
+clr_bss:
+/* clear bss area (the relocated) */
+ set __bss_start,%g2
+ set __bss_end,%g3
+ sub %g3,%g2,%g3
+ add %g3,%g4,%g3
+ clr %g1 /* std %g0 uses g0 and g1 */
+/* clearing 16byte a time ==> linker script need to align to 16 byte offset */
+clr_bss_16:
+ std %g0,[%g4]
+ std %g0,[%g4+8]
+ inc 16,%g4
+ cmp %g3,%g4
+ bne clr_bss_16
+ nop
+
+/* add offsets to GOT table */
+fixup_got:
+ set __got_start,%g4
+ set __got_end,%g3
+/*
+ * new got offset = (old GOT-PTR (read with ld) -
+ * CFG_RELOC_MONITOR_BASE(from define) ) +
+ * Destination Address (from define)
+ */
+ set CFG_RELOC_MONITOR_BASE,%g2
+ set TEXT_START, %g1
+ add %g4,%g2,%g4
+ sub %g4,%g1,%g4
+ add %g3,%g2,%g3
+ sub %g3,%g1,%g3
+ sub %g2,%g1,%g2 ! prepare register with (new base address) -
+ ! (old base address)
+got_loop:
+ ld [%g4],%l0 ! load old GOT-PTR
+ add %l0,%g2,%l0 ! increase with (new base address) -
+ ! (old base)
+ st %l0,[%g4]
+ inc 4,%g4
+ cmp %g3,%g4
+ bne got_loop
+ nop
+
+prom_relocate:
+ set __prom_start, %g2
+ set __prom_end, %g3
+ set CFG_PROM_OFFSET, %g4
+
+prom_relocate_loop:
+ ldd [%g2],%l0
+ ldd [%g2+8],%l2
+ std %l0,[%g4]
+ std %l2,[%g4+8]
+ inc 16,%g2
+ subcc %g3,%g2,%g0
+ bne prom_relocate_loop
+ inc 16,%g4
+
+/* Trap table has been moved, lets tell CPU about
+ * the new trap table address
+ */
+
+ set CFG_RELOC_MONITOR_BASE, %g2
+ wr %g0, %g2, %tbr
+
+/* call relocate*/
+ nop
+/* Call relocated init functions */
+jump:
+ set cpu_init_f2,%o1
+ set CFG_RELOC_MONITOR_BASE,%o2
+ add %o1,%o2,%o1
+ sub %o1,%g1,%o1
+ call %o1
+ clr %o0
+
+ set board_init_f,%o1
+ set CFG_RELOC_MONITOR_BASE,%o2
+ add %o1,%o2,%o1
+ sub %o1,%g1,%o1
+ call %o1
+ clr %o0
+
+dead: ta 0 ! if call returns...
+ nop
+
+/* Interrupt handler caller,
+ * reg L7: interrupt number
+ * reg L0: psr after interrupt
+ * reg L1: PC
+ * reg L2: next PC
+ * reg L3: wim
+ */
+_irq_entry:
+ SAVE_ALL
+
+ or %l0, PSR_PIL, %g2
+ wr %g2, 0x0, %psr
+ WRITE_PAUSE
+ wr %g2, PSR_ET, %psr
+ WRITE_PAUSE
+ mov %l7, %o0 ! irq level
+ set handler_irq, %o1
+ set (CFG_RELOC_MONITOR_BASE-TEXT_BASE), %o2
+ add %o1, %o2, %o1
+ call %o1
+ add %sp, SF_REGS_SZ, %o1 ! pt_regs ptr
+ or %l0, PSR_PIL, %g2 ! restore PIL after handler_irq
+ wr %g2, PSR_ET, %psr ! keep ET up
+ WRITE_PAUSE
+
+ RESTORE_ALL
+
+!Window overflow trap handler.
+ .global _window_overflow
+
+_window_overflow:
+
+ mov %wim, %l3 ! Calculate next WIM
+ mov %g1, %l7
+ srl %l3, 1, %g1
+ sll %l3, (CFG_SPARC_NWINDOWS-1) , %l4
+ or %l4, %g1, %g1
+
+ save ! Get into window to be saved.
+ mov %g1, %wim
+ nop;
+ nop;
+ nop
+ st %l0, [%sp + 0];
+ st %l1, [%sp + 4];
+ st %l2, [%sp + 8];
+ st %l3, [%sp + 12];
+ st %l4, [%sp + 16];
+ st %l5, [%sp + 20];
+ st %l6, [%sp + 24];
+ st %l7, [%sp + 28];
+ st %i0, [%sp + 32];
+ st %i1, [%sp + 36];
+ st %i2, [%sp + 40];
+ st %i3, [%sp + 44];
+ st %i4, [%sp + 48];
+ st %i5, [%sp + 52];
+ st %i6, [%sp + 56];
+ st %i7, [%sp + 60];
+ restore ! Go back to trap window.
+ mov %l7, %g1
+ jmp %l1 ! Re-execute save.
+ rett %l2
+
+/* Window underflow trap handler. */
+
+ .global _window_underflow
+
+_window_underflow:
+
+ mov %wim, %l3 ! Calculate next WIM
+ sll %l3, 1, %l4
+ srl %l3, (CFG_SPARC_NWINDOWS-1), %l5
+ or %l5, %l4, %l5
+ mov %l5, %wim
+ nop; nop; nop
+ restore ! Two restores to get into the
+ restore ! window to restore
+ ld [%sp + 0], %l0; ! Restore window from the stack
+ ld [%sp + 4], %l1;
+ ld [%sp + 8], %l2;
+ ld [%sp + 12], %l3;
+ ld [%sp + 16], %l4;
+ ld [%sp + 20], %l5;
+ ld [%sp + 24], %l6;
+ ld [%sp + 28], %l7;
+ ld [%sp + 32], %i0;
+ ld [%sp + 36], %i1;
+ ld [%sp + 40], %i2;
+ ld [%sp + 44], %i3;
+ ld [%sp + 48], %i4;
+ ld [%sp + 52], %i5;
+ ld [%sp + 56], %i6;
+ ld [%sp + 60], %i7;
+ save ! Get back to the trap window.
+ save
+ jmp %l1 ! Re-execute restore.
+ rett %l2
+
+ retl
+
+_nmi_trap:
+ nop
+ jmp %l1
+ rett %l2
+
+_hwerr:
+ ta 0
+ nop
+ nop
+ b _hwerr ! loop infinite
+ nop
+
+/* Registers to not touch at all. */
+#define t_psr l0 /* Set by caller */
+#define t_pc l1 /* Set by caller */
+#define t_npc l2 /* Set by caller */
+#define t_wim l3 /* Set by caller */
+#define t_twinmask l4 /* Set at beginning of this entry routine. */
+#define t_kstack l5 /* Set right before pt_regs frame is built */
+#define t_retpc l6 /* If you change this, change winmacro.h header file */
+#define t_systable l7 /* Never touch this, could be the syscall table ptr. */
+#define curptr g6 /* Set after pt_regs frame is built */
+
+trap_setup:
+/* build a pt_regs trap frame. */
+ sub %fp, (SF_REGS_SZ + PT_REGS_SZ), %t_kstack
+ PT_STORE_ALL(t_kstack, t_psr, t_pc, t_npc, g2)
+
+ /* See if we are in the trap window. */
+ mov 1, %t_twinmask
+ sll %t_twinmask, %t_psr, %t_twinmask ! t_twinmask = (1 << psr)
+ andcc %t_twinmask, %t_wim, %g0
+ beq 1f ! in trap window, clean up
+ nop
+
+ /*-------------------------------------------------
+ * Spill , adjust %wim and go.
+ */
+ srl %t_wim, 0x1, %g2 ! begin computation of new %wim
+
+ set (CFG_SPARC_NWINDOWS-1), %g3 !NWINDOWS-1
+
+ sll %t_wim, %g3, %t_wim ! NWINDOWS-1
+ or %t_wim, %g2, %g2
+ and %g2, 0xff, %g2
+
+ save %g0, %g0, %g0 ! get in window to be saved
+
+ /* Set new %wim value */
+ wr %g2, 0x0, %wim
+
+ /* Save the kernel window onto the corresponding stack. */
+ RW_STORE(sp)
+
+ restore %g0, %g0, %g0
+ /*-------------------------------------------------*/
+
+1:
+ /* Trap from kernel with a window available.
+ * Just do it...
+ */
+ jmpl %t_retpc + 0x8, %g0 ! return to caller
+ mov %t_kstack, %sp ! jump onto new stack
+
+#define twin_tmp1 l4
+#define glob_tmp g4
+#define curptr g6
+ret_trap_entry:
+ wr %t_psr, 0x0, %psr ! enable nesting again, clear ET
+
+ /* Will the rett land us in the invalid window? */
+ mov 2, %g1
+ sll %g1, %t_psr, %g1
+
+ set CFG_SPARC_NWINDOWS, %g2 !NWINDOWS
+
+ srl %g1, %g2, %g2
+ or %g1, %g2, %g1
+ rd %wim, %g2
+ andcc %g2, %g1, %g0
+ be 1f ! Nope, just return from the trap
+ sll %g2, 0x1, %g1
+
+ /* We have to grab a window before returning. */
+ set (CFG_SPARC_NWINDOWS-1), %g3 !NWINDOWS-1
+
+ srl %g2, %g3, %g2
+ or %g1, %g2, %g1
+ and %g1, 0xff, %g1
+
+ wr %g1, 0x0, %wim
+
+ /* Grrr, make sure we load from the right %sp... */
+ PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1)
+
+ restore %g0, %g0, %g0
+ RW_LOAD(sp)
+ b 2f
+ save %g0, %g0, %g0
+
+ /* Reload the entire frame in case this is from a
+ * kernel system call or whatever...
+ */
+1:
+ PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1)
+2:
+ wr %t_psr, 0x0, %psr
+ nop;
+ nop;
+ nop
+
+ jmp %t_pc
+ rett %t_npc
+
+/* This is called from relocated C-code.
+ * It resets the system by jumping to _start
+ */
+_reset_reloc:
+ set start, %l0
+ call %l0
+ nop
--- /dev/null
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).a
+
+START = start.o
+SOBJS =
+COBJS = cpu_init.o serial.o cpu.o ambapp.o interrupts.o prom.o usb_uhci.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+$(START): $(START:.o=.S)
+ $(CC) -D__ASSEMBLY__ $(DBGFLAGS) $(OPTFLAGS) -D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \
+ -I$(TOPDIR)/include -fno-builtin -ffreestanding -nostdinc -isystem $(gccincdir) -pipe \
+ $(PLATFORM_CPPFLAGS) -Wall -Wstrict-prototypes \
+ -I$(TOPDIR)/board -c -o $(START) $(START:.o=.S)
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/* Gaisler AMBA Plug&Play bus scanning. Functions
+ * ending on _nomem is inteded to be used only during
+ * initialization, only registers are used (no ram).
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <ambapp.h>
+
+#if defined(CONFIG_CMD_AMBAPP)
+extern void ambapp_print_apb(apbctrl_pp_dev * apb,
+ ambapp_ahbdev * apbmst, int index);
+extern void ambapp_print_ahb(ahbctrl_pp_dev * ahb, int index);
+extern int ambapp_apb_print;
+extern int ambapp_ahb_print;
+#endif
+
+static int ambapp_apb_scan(unsigned int vendor, /* Plug&Play Vendor ID */
+ unsigned int driver, /* Plug&Play Device ID */
+ ambapp_apbdev * dev, /* Result(s) is placed here */
+ int index, /* Index of device to start copying Plug&Play
+ * info into dev
+ */
+ int max_cnt /* Maximal count that dev can hold, if dev
+ * is NULL function will stop scanning after
+ * max_cnt devices are found.
+ */
+ )
+{
+ int i, cnt = 0;
+ unsigned int apbmst_base;
+ ambapp_ahbdev apbmst;
+ apbctrl_pp_dev *apb;
+
+ if (max_cnt == 0)
+ return 0;
+
+ /* Get AMBA APB Master */
+ if (ambapp_ahbslv_first(VENDOR_GAISLER, GAISLER_APBMST, &apbmst) != 1) {
+ return 0;
+ }
+
+ /* Get APB CTRL Plug&Play info area */
+ apbmst_base = apbmst.address[0] & LEON3_IO_AREA;
+ apb = (apbctrl_pp_dev *) (apbmst_base | LEON3_CONF_AREA);
+
+ for (i = 0; i < LEON3_APB_SLAVES; i++) {
+#if defined(CONFIG_CMD_AMBAPP)
+ if (ambapp_apb_print && amba_vendor(apb->conf)
+ && amba_device(apb->conf)) {
+ ambapp_print_apb(apb, &apbmst, i);
+ }
+#endif
+ if ((amba_vendor(apb->conf) == vendor) &&
+ (amba_device(apb->conf) == driver) && ((index < 0)
+ || (index-- == 0))) {
+ /* Convert Plug&Play info into a more readable format */
+ cnt++;
+ if (dev) {
+ dev->irq = amba_irq(apb->conf);
+ dev->ver = amba_ver(apb->conf);
+ dev->address =
+ (apbmst_base |
+ (((apb->
+ bar & 0xfff00000) >> 12))) & (((apb->
+ bar &
+ 0x0000fff0)
+ << 4) |
+ 0xfff00000);
+ dev++;
+ }
+ /* found max devices? */
+ if (cnt >= max_cnt)
+ return cnt;
+ }
+ /* Get next Plug&Play entry */
+ apb++;
+ }
+ return cnt;
+}
+
+unsigned int ambapp_apb_next_nomem(register unsigned int vendor, /* Plug&Play Vendor ID */
+ register unsigned int driver, /* Plug&Play Device ID */
+ register int index)
+{
+ register int i;
+ register ahbctrl_pp_dev *apbmst;
+ register apbctrl_pp_dev *apb;
+ register unsigned int apbmst_base;
+
+ /* APBMST is a AHB Slave */
+ apbmst = ambapp_ahb_next_nomem(VENDOR_GAISLER, GAISLER_APBMST, 1, 0);
+ if (!apbmst)
+ return 0;
+
+ apbmst_base = amba_membar_start(apbmst->bars[0]);
+ if (amba_membar_type(apbmst->bars[0]) == AMBA_TYPE_AHBIO)
+ apbmst_base = AMBA_TYPE_AHBIO_ADDR(apbmst_base);
+ apbmst_base &= LEON3_IO_AREA;
+
+ /* Find the vendor/driver device on the first APB bus */
+ apb = (apbctrl_pp_dev *) (apbmst_base | LEON3_CONF_AREA);
+
+ for (i = 0; i < LEON3_APB_SLAVES; i++) {
+ if ((amba_vendor(apb->conf) == vendor) &&
+ (amba_device(apb->conf) == driver) && ((index < 0)
+ || (index-- == 0))) {
+ /* Convert Plug&Play info info a more readable format */
+ return (apbmst_base | (((apb->bar & 0xfff00000) >> 12)))
+ & (((apb->bar & 0x0000fff0) << 4) | 0xfff00000);
+ }
+ /* Get next Plug&Play entry */
+ apb++;
+ }
+ return 0;
+}
+
+/****************************** APB SLAVES ******************************/
+
+int ambapp_apb_count(unsigned int vendor, unsigned int driver)
+{
+ return ambapp_apb_scan(vendor, driver, NULL, 0, LEON3_APB_SLAVES);
+}
+
+int ambapp_apb_first(unsigned int vendor,
+ unsigned int driver, ambapp_apbdev * dev)
+{
+ return ambapp_apb_scan(vendor, driver, dev, 0, 1);
+}
+
+int ambapp_apb_next(unsigned int vendor,
+ unsigned int driver, ambapp_apbdev * dev, int index)
+{
+ return ambapp_apb_scan(vendor, driver, dev, index, 1);
+}
+
+int ambapp_apbs_first(unsigned int vendor,
+ unsigned int driver, ambapp_apbdev * dev, int max_cnt)
+{
+ return ambapp_apb_scan(vendor, driver, dev, 0, max_cnt);
+}
+
+enum {
+ AHB_SCAN_MASTER = 0,
+ AHB_SCAN_SLAVE = 1
+};
+
+/* Scan AMBA Plug&Play bus for AMBA AHB Masters or AHB Slaves
+ * for a certain matching Vendor and Device ID.
+ *
+ * Return number of devices found.
+ *
+ * Compact edition...
+ */
+static int ambapp_ahb_scan(unsigned int vendor, /* Plug&Play Vendor ID */
+ unsigned int driver, /* Plug&Play Device ID */
+ ambapp_ahbdev * dev, /* Result(s) is placed here */
+ int index, /* Index of device to start copying Plug&Play
+ * info into dev
+ */
+ int max_cnt, /* Maximal count that dev can hold, if dev
+ * is NULL function will stop scanning after
+ * max_cnt devices are found.
+ */
+ int type /* Selectes what type of devices to scan.
+ * 0=AHB Masters
+ * 1=AHB Slaves
+ */
+ )
+{
+ int i, j, cnt = 0, max_pp_devs;
+ unsigned int addr;
+ ahbctrl_info *info = (ahbctrl_info *) (LEON3_IO_AREA | LEON3_CONF_AREA);
+ ahbctrl_pp_dev *ahb;
+
+ if (max_cnt == 0)
+ return 0;
+
+ if (type == 0) {
+ max_pp_devs = LEON3_AHB_MASTERS;
+ ahb = info->masters;
+ } else {
+ max_pp_devs = LEON3_AHB_SLAVES;
+ ahb = info->slaves;
+ }
+
+ for (i = 0; i < max_pp_devs; i++) {
+#if defined(CONFIG_CMD_AMBAPP)
+ if (ambapp_ahb_print && amba_vendor(ahb->conf) &&
+ amba_device(ahb->conf)) {
+ ambapp_print_ahb(ahb, i);
+ }
+#endif
+ if ((amba_vendor(ahb->conf) == vendor) &&
+ (amba_device(ahb->conf) == driver) &&
+ ((index < 0) || (index-- == 0))) {
+ /* Convert Plug&Play info info a more readable format */
+ cnt++;
+ if (dev) {
+ dev->irq = amba_irq(ahb->conf);
+ dev->ver = amba_ver(ahb->conf);
+ dev->userdef[0] = ahb->userdef[0];
+ dev->userdef[1] = ahb->userdef[1];
+ dev->userdef[2] = ahb->userdef[2];
+ for (j = 0; j < 4; j++) {
+ addr = amba_membar_start(ahb->bars[j]);
+ if (amba_membar_type(ahb->bars[j]) ==
+ AMBA_TYPE_AHBIO)
+ addr =
+ AMBA_TYPE_AHBIO_ADDR(addr);
+ dev->address[j] = addr;
+ }
+ dev++;
+ }
+ /* found max devices? */
+ if (cnt >= max_cnt)
+ return cnt;
+ }
+ /* Get next Plug&Play entry */
+ ahb++;
+ }
+ return cnt;
+}
+
+unsigned int ambapp_ahb_get_info(ahbctrl_pp_dev * ahb, int info)
+{
+ register unsigned int ret;
+
+ if (!ahb)
+ return 0;
+
+ switch (info) {
+ default:
+ info = 0;
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ /* Get Address from PnP Info */
+ ret = amba_membar_start(ahb->bars[info]);
+ if (amba_membar_type(ahb->bars[info]) == AMBA_TYPE_AHBIO)
+ ret = AMBA_TYPE_AHBIO_ADDR(ret);
+ return ret;
+ }
+ return 0;
+
+}
+
+ahbctrl_pp_dev *ambapp_ahb_next_nomem(register unsigned int vendor, /* Plug&Play Vendor ID */
+ register unsigned int driver, /* Plug&Play Device ID */
+ register unsigned int opts, /* 1=slave, 0=master */
+ register int index)
+{
+ register ahbctrl_pp_dev *ahb;
+ register ahbctrl_info *info =
+ (ahbctrl_info *) (LEON3_IO_AREA | LEON3_CONF_AREA);
+ register int i;
+ register int max_pp_devs;
+
+ if (opts == 0) {
+ max_pp_devs = LEON3_AHB_MASTERS;
+ ahb = info->masters;
+ } else {
+ max_pp_devs = LEON3_AHB_SLAVES;
+ ahb = info->slaves;
+ }
+
+ for (i = 0; i < max_pp_devs; i++) {
+ if ((amba_vendor(ahb->conf) == vendor) &&
+ (amba_device(ahb->conf) == driver) &&
+ ((index < 0) || (index-- == 0))) {
+ /* Convert Plug&Play info info a more readable format */
+ return ahb;
+ }
+ /* Get next Plug&Play entry */
+ ahb++;
+ }
+ return 0;
+}
+
+/****************************** AHB MASTERS ******************************/
+int ambapp_ahbmst_count(unsigned int vendor, unsigned int driver)
+{
+ /* Get number of devices of this vendor&device ID */
+ return ambapp_ahb_scan(vendor, driver, NULL, 0, LEON3_AHB_MASTERS,
+ AHB_SCAN_MASTER);
+}
+
+int ambapp_ahbmst_first(unsigned int vendor, unsigned int driver,
+ ambapp_ahbdev * dev)
+{
+ /* find first device of this */
+ return ambapp_ahb_scan(vendor, driver, dev, 0, 1, AHB_SCAN_MASTER);
+}
+
+int ambapp_ahbmst_next(unsigned int vendor,
+ unsigned int driver, ambapp_ahbdev * dev, int index)
+{
+ /* find first device of this */
+ return ambapp_ahb_scan(vendor, driver, dev, index, 1, AHB_SCAN_MASTER);
+}
+
+int ambapp_ahbmsts_first(unsigned int vendor,
+ unsigned int driver, ambapp_ahbdev * dev, int max_cnt)
+{
+ /* find first device of this */
+ return ambapp_ahb_scan(vendor, driver, dev, 0, max_cnt,
+ AHB_SCAN_MASTER);
+}
+
+/****************************** AHB SLAVES ******************************/
+int ambapp_ahbslv_count(unsigned int vendor, unsigned int driver)
+{
+ /* Get number of devices of this vendor&device ID */
+ return ambapp_ahb_scan(vendor, driver, NULL, 0, LEON3_AHB_SLAVES,
+ AHB_SCAN_SLAVE);
+}
+
+int ambapp_ahbslv_first(unsigned int vendor, unsigned int driver,
+ ambapp_ahbdev * dev)
+{
+ /* find first device of this */
+ return ambapp_ahb_scan(vendor, driver, dev, 0, 1, AHB_SCAN_SLAVE);
+}
+
+int ambapp_ahbslv_next(unsigned int vendor,
+ unsigned int driver, ambapp_ahbdev * dev, int index)
+{
+ /* find first device of this */
+ return ambapp_ahb_scan(vendor, driver, dev, index, 1, AHB_SCAN_SLAVE);
+}
+
+int ambapp_ahbslvs_first(unsigned int vendor,
+ unsigned int driver, ambapp_ahbdev * dev, int max_cnt)
+{
+ /* find first device of this */
+ return ambapp_ahb_scan(vendor, driver, dev, 0, max_cnt, AHB_SCAN_SLAVE);
+}
--- /dev/null
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fPIC
+
+PLATFORM_CPPFLAGS += -DCONFIG_LEON
--- /dev/null
+/* CPU specific code for the LEON3 CPU
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void _reset_reloc(void);
+
+int checkcpu(void)
+{
+ /* check LEON version here */
+ printf("CPU: LEON3\n");
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+void cpu_reset(void)
+{
+ /* Interrupts off */
+ disable_interrupts();
+
+ /* jump to restart in flash */
+ _reset_reloc();
+}
+
+int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ cpu_reset();
+
+ return 1;
+
+}
+
+u64 flash_read64(void *addr)
+{
+ return __raw_readq(addr);
+}
+
+/* ------------------------------------------------------------------------- */
--- /dev/null
+/* Initializes CPU and basic hardware such as memory
+ * controllers, IRQ controller and system timer 0.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/asi.h>
+#include <asm/leon.h>
+#include <ambapp.h>
+
+#include <config.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* reset CPU (jump to 0, without reset) */
+void start(void);
+
+/* find & initialize the memory controller */
+int init_memory_ctrl(void);
+
+ambapp_dev_irqmp *irqmp = NULL;
+ambapp_dev_mctrl memctrl;
+ambapp_dev_gptimer *gptimer = NULL;
+unsigned int gptimer_irq = 0;
+int leon3_snooping_avail = 0;
+
+struct {
+ gd_t gd_area;
+ bd_t bd;
+} global_data;
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers.
+ *
+ * Run from FLASH/PROM:
+ * - until memory controller is set up, only registers avaiable
+ * - no global variables available for writing
+ * - constants avaiable
+ */
+
+void cpu_init_f(void)
+{
+ /* these varaiable must not be initialized */
+ ambapp_dev_irqmp *irqmp;
+ ambapp_apbdev apbdev;
+ register unsigned int apbmst;
+
+ /* find AMBA APB Master */
+ apbmst = (unsigned int)
+ ambapp_ahb_next_nomem(VENDOR_GAISLER, GAISLER_APBMST, 1, 0);
+ if (!apbmst) {
+ /*
+ * no AHB/APB bridge, something is wrong
+ * ==> jump to start (or hang)
+ */
+ while (1) ;
+ }
+ /* Init memory controller */
+ if (init_memory_ctrl()) {
+ while (1) ;
+ }
+
+ /****************************************************
+ * From here we can use the main memory and the stack.
+ */
+
+ /* Find AMBA APB IRQMP Controller */
+ if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_IRQMP, &apbdev) != 1) {
+ /* no IRQ controller, something is wrong
+ * ==> jump to start (or hang)
+ */
+ while (1) ;
+ }
+ irqmp = (ambapp_dev_irqmp *) apbdev.address;
+
+ /* initialize the IRQMP */
+ irqmp->ilevel = 0xf; /* all IRQ off */
+ irqmp->iforce = 0;
+ irqmp->ipend = 0;
+ irqmp->iclear = 0xfffe; /* clear all old pending interrupts */
+ irqmp->cpu_mask[0] = 0; /* mask all IRQs on CPU 0 */
+ irqmp->cpu_force[0] = 0; /* no force IRQ on CPU 0 */
+
+ /* cache */
+}
+
+void cpu_init_f2(void)
+{
+
+}
+
+/*
+ * initialize higher level parts of CPU like time base and timers
+ */
+int cpu_init_r(void)
+{
+ ambapp_apbdev apbdev;
+
+ /*
+ * Find AMBA APB IRQMP Controller,
+ * When we come so far we know there is a IRQMP available
+ */
+ ambapp_apb_first(VENDOR_GAISLER, GAISLER_IRQMP, &apbdev);
+ irqmp = (ambapp_dev_irqmp *) apbdev.address;
+
+ /* timer */
+ if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_GPTIMER, &apbdev) != 1) {
+ printf("cpu_init_r: gptimer not found!\n");
+ return 1;
+ }
+ gptimer = (ambapp_dev_gptimer *) apbdev.address;
+ gptimer_irq = apbdev.irq;
+
+ /* initialize prescaler common to all timers to 1MHz */
+ gptimer->scalar = gptimer->scalar_reload =
+ (((CONFIG_SYS_CLK_FREQ / 1000) + 500) / 1000) - 1;
+
+ return (0);
+}
+
+/* find & setup memory controller */
+int init_memory_ctrl()
+{
+ register ambapp_dev_mctrl *mctrl;
+ register ambapp_dev_sdctrl *sdctrl;
+ register ambapp_dev_ddrspa *ddrspa;
+ register ambapp_dev_ddr2spa *ddr2spa;
+ register ahbctrl_pp_dev *ahb;
+ register unsigned int base;
+ register int not_found_mctrl = -1;
+
+ /* find ESA Memory controller */
+ base = ambapp_apb_next_nomem(VENDOR_ESA, ESA_MCTRL, 0);
+ if (base) {
+ mctrl = (ambapp_dev_mctrl *) base;
+
+ /* config MCTRL memory controller */
+ mctrl->mcfg1 = CFG_GRLIB_MEMCFG1 | (mctrl->mcfg1 & 0x300);
+ mctrl->mcfg2 = CFG_GRLIB_MEMCFG2;
+ mctrl->mcfg3 = CFG_GRLIB_MEMCFG3;
+ not_found_mctrl = 0;
+ }
+
+ /* find Gaisler Fault Tolerant Memory controller */
+ base = ambapp_apb_next_nomem(VENDOR_GAISLER, GAISLER_FTMCTRL, 0);
+ if (base) {
+ mctrl = (ambapp_dev_mctrl *) base;
+
+ /* config MCTRL memory controller */
+ mctrl->mcfg1 = CFG_GRLIB_FT_MEMCFG1 | (mctrl->mcfg1 & 0x300);
+ mctrl->mcfg2 = CFG_GRLIB_FT_MEMCFG2;
+ mctrl->mcfg3 = CFG_GRLIB_FT_MEMCFG3;
+ not_found_mctrl = 0;
+ }
+
+ /* find SDRAM controller */
+ base = ambapp_apb_next_nomem(VENDOR_GAISLER, GAISLER_SDCTRL, 0);
+ if (base) {
+ sdctrl = (ambapp_dev_sdctrl *) base;
+
+ /* config memory controller */
+ sdctrl->sdcfg = CFG_GRLIB_SDRAM;
+ not_found_mctrl = 0;
+ }
+
+ ahb = ambapp_ahb_next_nomem(VENDOR_GAISLER, GAISLER_DDR2SPA, 1, 0);
+ if (ahb) {
+ ddr2spa = (ambapp_dev_ddr2spa *) ambapp_ahb_get_info(ahb, 1);
+
+ /* Config DDR2 memory controller */
+ ddr2spa->cfg1 = CFG_GRLIB_DDR2_CFG1;
+ ddr2spa->cfg3 = CFG_GRLIB_DDR2_CFG3;
+ not_found_mctrl = 0;
+ }
+
+ ahb = ambapp_ahb_next_nomem(VENDOR_GAISLER, GAISLER_DDRSPA, 1, 0);
+ if (ahb) {
+ ddrspa = (ambapp_dev_ddrspa *) ambapp_ahb_get_info(ahb, 1);
+
+ /* Config DDR memory controller */
+ ddrspa->ctrl = CFG_GRLIB_DDR_CFG;
+ not_found_mctrl = 0;
+ }
+
+ /* failed to find any memory controller */
+ return not_found_mctrl;
+}
+
+/* Uses Timer 0 to get accurate
+ * pauses. Max 2 raised to 32 ticks
+ *
+ */
+void cpu_wait_ticks(unsigned long ticks)
+{
+ unsigned long start = get_timer(0);
+ while (get_timer(start) < ticks) ;
+}
+
+/* initiate and setup timer0 interrupt to 1MHz
+ * Return irq number for timer int or a negative number for
+ * dealing with self
+ */
+int timer_interrupt_init_cpu(void)
+{
+ /* 1ms ticks */
+ gptimer->e[0].val = 0;
+ gptimer->e[0].rld = 999; /* (((1000000 / 100) - 1)) */
+ gptimer->e[0].ctrl =
+ (LEON3_GPTIMER_EN |
+ LEON3_GPTIMER_RL | LEON3_GPTIMER_LD | LEON3_GPTIMER_IRQEN);
+
+ return gptimer_irq;
+}
+
+/*
+ * This function is intended for SHORT delays only.
+ */
+unsigned long cpu_usec2ticks(unsigned long usec)
+{
+ /* timer set to 1kHz ==> 1 clk tick = 1 msec */
+ if (usec < 1000)
+ return 1;
+ return (usec / 1000);
+}
+
+unsigned long cpu_ticks2usec(unsigned long ticks)
+{
+ /* 1tick = 1usec */
+ return ticks * 1000;
+}
--- /dev/null
+/*
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
+ *
+ * (C) Copyright 2006
+ * Detlev Zundel, DENX Software Engineering, dzu@denx.de
+ *
+ * (C) Copyright -2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/stack.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <asm/irq.h>
+
+#include <asm/leon.h>
+#include <ambapp.h>
+
+/* 15 normal irqs and a non maskable interrupt */
+#define NR_IRQS 15
+
+struct irq_action {
+ interrupt_handler_t *handler;
+ void *arg;
+ unsigned int count;
+};
+
+extern ambapp_dev_irqmp *irqmp;
+extern ambapp_dev_gptimer *gptimer;
+
+static struct irq_action irq_handlers[NR_IRQS] = { {0}, };
+static int spurious_irq_cnt = 0;
+static int spurious_irq = 0;
+
+static inline unsigned int irqmp_get_irqmask(unsigned int irq)
+{
+ if ((irq < 0) || (irq >= NR_IRQS)) {
+ return 0;
+ } else {
+ return (1 << irq);
+ }
+
+}
+
+static void leon3_ic_disable(unsigned int irq)
+{
+ unsigned int mask, pil;
+ if (!irqmp)
+ return;
+
+ pil = intLock();
+
+ /* get mask of interrupt */
+ mask = irqmp_get_irqmask(irq);
+
+ /* set int level */
+ irqmp->cpu_mask[0] = SPARC_NOCACHE_READ(&irqmp->cpu_mask[0]) & (~mask);
+
+ intUnlock(pil);
+}
+
+static void leon3_ic_enable(unsigned int irq)
+{
+ unsigned int mask, pil;
+ if (!irqmp)
+ return;
+
+ pil = intLock();
+
+ /* get mask of interrupt */
+ mask = irqmp_get_irqmask(irq);
+
+ /* set int level */
+ irqmp->cpu_mask[0] = SPARC_NOCACHE_READ(&irqmp->cpu_mask[0]) | mask;
+
+ intUnlock(pil);
+
+}
+
+void handler_irq(int irq, struct pt_regs *regs)
+{
+ if (irq_handlers[irq].handler) {
+ if (((unsigned int)irq_handlers[irq].handler > CFG_RAM_END) ||
+ ((unsigned int)irq_handlers[irq].handler < CFG_RAM_BASE)
+ ) {
+ printf("handler_irq: bad handler: %x, irq number %d\n",
+ (unsigned int)irq_handlers[irq].handler, irq);
+ return;
+ }
+ irq_handlers[irq].handler(irq_handlers[irq].arg);
+ irq_handlers[irq].count++;
+ } else {
+ spurious_irq_cnt++;
+ spurious_irq = irq;
+ }
+}
+
+void leon3_force_int(int irq)
+{
+ if (!irqmp || (irq >= NR_IRQS) || (irq < 0))
+ return;
+ printf("Forcing interrupt %d\n", irq);
+
+ irqmp->iforce = SPARC_NOCACHE_READ(&irqmp->iforce) | (1 << irq);
+}
+
+/****************************************************************************/
+
+int interrupt_init_cpu(void)
+{
+
+ return (0);
+}
+
+/****************************************************************************/
+
+/* Handle Timer 0 IRQ */
+void timer_interrupt_cpu(void *arg)
+{
+ gptimer->e[0].ctrl = (LEON3_GPTIMER_EN |
+ LEON3_GPTIMER_RL |
+ LEON3_GPTIMER_LD | LEON3_GPTIMER_IRQEN);
+ /* nothing to do here */
+ return;
+}
+
+/****************************************************************************/
+
+/*
+ * Install and free a interrupt handler.
+ */
+
+void irq_install_handler(int irq, interrupt_handler_t * handler, void *arg)
+{
+ if (irq < 0 || irq >= NR_IRQS) {
+ printf("irq_install_handler: bad irq number %d\n", irq);
+ return;
+ }
+
+ if (irq_handlers[irq].handler != NULL)
+ printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
+ (ulong) handler, (ulong) irq_handlers[irq].handler);
+
+ if (((unsigned int)handler > CFG_RAM_END) ||
+ ((unsigned int)handler < CFG_RAM_BASE)
+ ) {
+ printf("irq_install_handler: bad handler: %x, irq number %d\n",
+ (unsigned int)handler, irq);
+ return;
+ }
+ irq_handlers[irq].handler = handler;
+ irq_handlers[irq].arg = arg;
+
+ /* enable irq on IRQMP hardware */
+ leon3_ic_enable(irq);
+
+}
+
+void irq_free_handler(int irq)
+{
+ if (irq < 0 || irq >= NR_IRQS) {
+ printf("irq_free_handler: bad irq number %d\n", irq);
+ return;
+ }
+
+ /* disable irq on IRQMP hardware */
+ leon3_ic_disable(irq);
+
+ irq_handlers[irq].handler = NULL;
+ irq_handlers[irq].arg = NULL;
+}
+
+/****************************************************************************/
+
+#if defined(CONFIG_CMD_IRQ)
+void do_irqinfo(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
+{
+ int irq;
+ unsigned int pil = get_pil();
+ printf("PIL level: %u\n\r", pil);
+ printf("Spurious IRQ: %u, last unknown IRQ: %d\n",
+ spurious_irq_cnt, spurious_irq);
+
+ puts("\nInterrupt-Information:\n" "Nr Routine Arg Count\n");
+
+ for (irq = 0; irq < NR_IRQS; irq++) {
+ if (irq_handlers[irq].handler != NULL) {
+ printf("%02d %08lx %08lx %ld\n", irq,
+ (unsigned int)irq_handlers[irq].handler,
+ (unsigned int)irq_handlers[irq].arg,
+ irq_handlers[irq].count);
+ }
+ }
+}
+#endif
--- /dev/null
+/* prom.c - emulates a sparc v0 PROM for the linux kernel.
+ *
+ * Copyright (C) 2003 Konrad Eisele <eiselekd@web.de>
+ * Copyright (C) 2004 Stefan Holst <mail@s-holst.de>
+ * Copyright (C) 2007 Daniel Hellstrom <daniel@gaisler.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/prom.h>
+#include <asm/machines.h>
+#include <asm/srmmu.h>
+#include <asm/processor.h>
+#include <asm/irq.h>
+#include <asm/leon.h>
+#include <ambapp.h>
+
+#include <config.h>
+/*
+#define PRINT_ROM_VEC
+*/
+extern struct linux_romvec *kernel_arg_promvec;
+extern ambapp_dev_apbuart *leon3_apbuart;
+
+#define PROM_PGT __attribute__ ((__section__ (".prom.pgt")))
+#define PROM_TEXT __attribute__ ((__section__ (".prom.text")))
+#define PROM_DATA __attribute__ ((__section__ (".prom.data")))
+
+ambapp_dev_gptimer *gptimer;
+
+/* for __va */
+extern int __prom_start;
+#define PAGE_OFFSET 0xf0000000
+#define phys_base CFG_SDRAM_BASE
+#define PROM_OFFS 8192
+#define PROM_SIZE_MASK (PROM_OFFS-1)
+#define __va(x) ( \
+ (void *)( ((unsigned long)(x))-PROM_OFFS+ \
+ (CFG_PROM_OFFSET-phys_base)+PAGE_OFFSET-TEXT_BASE ) \
+ )
+#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CFG_PROM_OFFSET-TEXT_BASE))
+
+struct property {
+ char *name;
+ char *value;
+ int length;
+};
+
+struct node {
+ int level;
+ struct property *properties;
+};
+
+static void leon_reboot(char *bcommand);
+static void leon_halt(void);
+static int leon_nbputchar(int c);
+static int leon_nbgetchar(void);
+
+static int no_nextnode(int node);
+static int no_child(int node);
+static int no_proplen(int node, char *name);
+static int no_getprop(int node, char *name, char *value);
+static int no_setprop(int node, char *name, char *value, int len);
+static char *no_nextprop(int node, char *name);
+
+static struct property PROM_TEXT *find_property(int node, char *name);
+static int PROM_TEXT leon_strcmp(const char *s1, const char *s2);
+static void *PROM_TEXT leon_memcpy(void *dest, const void *src, size_t n);
+static void PROM_TEXT leon_reboot_physical(char *bcommand);
+
+void __inline__ leon_flush_cache_all(void)
+{
+ __asm__ __volatile__(" flush ");
+ __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"::"i"(ASI_DFLUSH):"memory");
+}
+
+void __inline__ leon_flush_tlb_all(void)
+{
+ leon_flush_cache_all();
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(0x400),
+ "i"(ASI_MMUFLUSH):"memory");
+}
+
+typedef struct {
+ unsigned int ctx_table[256];
+ unsigned int pgd_table[256];
+} sparc_srmmu_setup;
+
+sparc_srmmu_setup srmmu_tables PROM_PGT = {
+ {0},
+ {0x1e,
+ 0x10001e,
+ 0x20001e,
+ 0x30001e,
+ 0x40001e,
+ 0x50001e,
+ 0x60001e,
+ 0x70001e,
+ 0x80001e,
+ 0x90001e,
+ 0xa0001e,
+ 0xb0001e,
+ 0xc0001e,
+ 0xd0001e,
+ 0xe0001e,
+ 0xf0001e,
+ 0x100001e,
+ 0x110001e,
+ 0x120001e,
+ 0x130001e,
+ 0x140001e,
+ 0x150001e,
+ 0x160001e,
+ 0x170001e,
+ 0x180001e,
+ 0x190001e,
+ 0x1a0001e,
+ 0x1b0001e,
+ 0x1c0001e,
+ 0x1d0001e,
+ 0x1e0001e,
+ 0x1f0001e,
+ 0x200001e,
+ 0x210001e,
+ 0x220001e,
+ 0x230001e,
+ 0x240001e,
+ 0x250001e,
+ 0x260001e,
+ 0x270001e,
+ 0x280001e,
+ 0x290001e,
+ 0x2a0001e,
+ 0x2b0001e,
+ 0x2c0001e,
+ 0x2d0001e,
+ 0x2e0001e,
+ 0x2f0001e,
+ 0x300001e,
+ 0x310001e,
+ 0x320001e,
+ 0x330001e,
+ 0x340001e,
+ 0x350001e,
+ 0x360001e,
+ 0x370001e,
+ 0x380001e,
+ 0x390001e,
+ 0x3a0001e,
+ 0x3b0001e,
+ 0x3c0001e,
+ 0x3d0001e,
+ 0x3e0001e,
+ 0x3f0001e,
+ 0x400001e,
+ 0x410001e,
+ 0x420001e,
+ 0x430001e,
+ 0x440001e,
+ 0x450001e,
+ 0x460001e,
+ 0x470001e,
+ 0x480001e,
+ 0x490001e,
+ 0x4a0001e,
+ 0x4b0001e,
+ 0x4c0001e,
+ 0x4d0001e,
+ 0x4e0001e,
+ 0x4f0001e,
+ 0x500001e,
+ 0x510001e,
+ 0x520001e,
+ 0x530001e,
+ 0x540001e,
+ 0x550001e,
+ 0x560001e,
+ 0x570001e,
+ 0x580001e,
+ 0x590001e,
+ 0x5a0001e,
+ 0x5b0001e,
+ 0x5c0001e,
+ 0x5d0001e,
+ 0x5e0001e,
+ 0x5f0001e,
+ 0x600001e,
+ 0x610001e,
+ 0x620001e,
+ 0x630001e,
+ 0x640001e,
+ 0x650001e,
+ 0x660001e,
+ 0x670001e,
+ 0x680001e,
+ 0x690001e,
+ 0x6a0001e,
+ 0x6b0001e,
+ 0x6c0001e,
+ 0x6d0001e,
+ 0x6e0001e,
+ 0x6f0001e,
+ 0x700001e,
+ 0x710001e,
+ 0x720001e,
+ 0x730001e,
+ 0x740001e,
+ 0x750001e,
+ 0x760001e,
+ 0x770001e,
+ 0x780001e,
+ 0x790001e,
+ 0x7a0001e,
+ 0x7b0001e,
+ 0x7c0001e,
+ 0x7d0001e,
+ 0x7e0001e,
+ 0x7f0001e,
+ 0x800001e,
+ 0x810001e,
+ 0x820001e,
+ 0x830001e,
+ 0x840001e,
+ 0x850001e,
+ 0x860001e,
+ 0x870001e,
+ 0x880001e,
+ 0x890001e,
+ 0x8a0001e,
+ 0x8b0001e,
+ 0x8c0001e,
+ 0x8d0001e,
+ 0x8e0001e,
+ 0x8f0001e,
+ 0x900001e,
+ 0x910001e,
+ 0x920001e,
+ 0x930001e,
+ 0x940001e,
+ 0x950001e,
+ 0x960001e,
+ 0x970001e,
+ 0x980001e,
+ 0x990001e,
+ 0x9a0001e,
+ 0x9b0001e,
+ 0x9c0001e,
+ 0x9d0001e,
+ 0x9e0001e,
+ 0x9f0001e,
+ 0xa00001e,
+ 0xa10001e,
+ 0xa20001e,
+ 0xa30001e,
+ 0xa40001e,
+ 0xa50001e,
+ 0xa60001e,
+ 0xa70001e,
+ 0xa80001e,
+ 0xa90001e,
+ 0xaa0001e,
+ 0xab0001e,
+ 0xac0001e,
+ 0xad0001e,
+ 0xae0001e,
+ 0xaf0001e,
+ 0xb00001e,
+ 0xb10001e,
+ 0xb20001e,
+ 0xb30001e,
+ 0xb40001e,
+ 0xb50001e,
+ 0xb60001e,
+ 0xb70001e,
+ 0xb80001e,
+ 0xb90001e,
+ 0xba0001e,
+ 0xbb0001e,
+ 0xbc0001e,
+ 0xbd0001e,
+ 0xbe0001e,
+ 0xbf0001e,
+ 0xc00001e,
+ 0xc10001e,
+ 0xc20001e,
+ 0xc30001e,
+ 0xc40001e,
+ 0xc50001e,
+ 0xc60001e,
+ 0xc70001e,
+ 0xc80001e,
+ 0xc90001e,
+ 0xca0001e,
+ 0xcb0001e,
+ 0xcc0001e,
+ 0xcd0001e,
+ 0xce0001e,
+ 0xcf0001e,
+ 0xd00001e,
+ 0xd10001e,
+ 0xd20001e,
+ 0xd30001e,
+ 0xd40001e,
+ 0xd50001e,
+ 0xd60001e,
+ 0xd70001e,
+ 0xd80001e,
+ 0xd90001e,
+ 0xda0001e,
+ 0xdb0001e,
+ 0xdc0001e,
+ 0xdd0001e,
+ 0xde0001e,
+ 0xdf0001e,
+ 0xe00001e,
+ 0xe10001e,
+ 0xe20001e,
+ 0xe30001e,
+ 0xe40001e,
+ 0xe50001e,
+ 0xe60001e,
+ 0xe70001e,
+ 0xe80001e,
+ 0xe90001e,
+ 0xea0001e,
+ 0xeb0001e,
+ 0xec0001e,
+ 0xed0001e,
+ 0xee0001e,
+ 0xef0001e,
+ 0x400001e /* default */
+ }
+};
+
+/* a self contained prom info structure */
+struct leon_reloc_func {
+ struct property *(*find_property) (int node, char *name);
+ int (*strcmp) (char *s1, char *s2);
+ void *(*memcpy) (void *dest, const void *src, size_t n);
+ void (*reboot_physical) (char *cmd);
+ ambapp_dev_apbuart *leon3_apbuart;
+};
+
+struct leon_prom_info {
+ int freq_khz;
+ int leon_nctx;
+ int mids[32];
+ int baudrates[2];
+ struct leon_reloc_func reloc_funcs;
+ struct property root_properties[4];
+ struct property cpu_properties[7];
+#undef CPUENTRY
+#define CPUENTRY(idx) struct property cpu_properties##idx[4]
+ CPUENTRY(1);
+ CPUENTRY(2);
+ CPUENTRY(3);
+ CPUENTRY(4);
+ CPUENTRY(5);
+ CPUENTRY(6);
+ CPUENTRY(7);
+ CPUENTRY(8);
+ CPUENTRY(9);
+ CPUENTRY(10);
+ CPUENTRY(11);
+ CPUENTRY(12);
+ CPUENTRY(13);
+ CPUENTRY(14);
+ CPUENTRY(15);
+ CPUENTRY(16);
+ CPUENTRY(17);
+ CPUENTRY(18);
+ CPUENTRY(19);
+ CPUENTRY(20);
+ CPUENTRY(21);
+ CPUENTRY(22);
+ CPUENTRY(23);
+ CPUENTRY(24);
+ CPUENTRY(25);
+ CPUENTRY(26);
+ CPUENTRY(27);
+ CPUENTRY(28);
+ CPUENTRY(29);
+ CPUENTRY(30);
+ CPUENTRY(31);
+ struct idprom idprom;
+ struct linux_nodeops nodeops;
+ struct linux_mlist_v0 *totphys_p;
+ struct linux_mlist_v0 totphys;
+ struct linux_mlist_v0 *avail_p;
+ struct linux_mlist_v0 avail;
+ struct linux_mlist_v0 *prommap_p;
+ void (*synchook) (void);
+ struct linux_arguments_v0 *bootargs_p;
+ struct linux_arguments_v0 bootargs;
+ struct linux_romvec romvec;
+ struct node nodes[35];
+ char s_device_type[12];
+ char s_cpu[4];
+ char s_mid[4];
+ char s_idprom[7];
+ char s_compatability[14];
+ char s_leon2[6];
+ char s_mmu_nctx[9];
+ char s_frequency[16];
+ char s_uart1_baud[11];
+ char s_uart2_baud[11];
+ char arg[256];
+};
+
+/* static prom info */
+static struct leon_prom_info PROM_DATA spi = {
+ CONFIG_SYS_CLK_FREQ / 1000,
+ 256,
+ {
+#undef CPUENTRY
+#define CPUENTRY(idx) idx
+ CPUENTRY(0),
+ CPUENTRY(1),
+ CPUENTRY(2),
+ CPUENTRY(3),
+ CPUENTRY(4),
+ CPUENTRY(5),
+ CPUENTRY(6),
+ CPUENTRY(7),
+ CPUENTRY(8),
+ CPUENTRY(9),
+ CPUENTRY(10),
+ CPUENTRY(11),
+ CPUENTRY(12),
+ CPUENTRY(13),
+ CPUENTRY(14),
+ CPUENTRY(15),
+ CPUENTRY(16),
+ CPUENTRY(17),
+ CPUENTRY(18),
+ CPUENTRY(19),
+ CPUENTRY(20),
+ CPUENTRY(21),
+ CPUENTRY(22),
+ CPUENTRY(23),
+ CPUENTRY(24),
+ CPUENTRY(25),
+ CPUENTRY(26),
+ CPUENTRY(27),
+ CPUENTRY(28),
+ CPUENTRY(29),
+ CPUENTRY(30),
+ 31},
+ {38400, 38400},
+ {
+ __va(find_property),
+ __va(leon_strcmp),
+ __va(leon_memcpy),
+ __phy(leon_reboot_physical),
+ },
+ {
+ {__va(spi.s_device_type), __va(spi.s_idprom), 4},
+ {__va(spi.s_idprom), (char *)__va(&spi.idprom), sizeof(struct idprom)},
+ {__va(spi.s_compatability), __va(spi.s_leon2), 5},
+ {NULL, NULL, -1}
+ },
+ {
+ {__va(spi.s_device_type), __va(spi.s_cpu), 4},
+ {__va(spi.s_mid), __va(&spi.mids[0]), 4},
+ {__va(spi.s_mmu_nctx), (char *)__va(&spi.leon_nctx), 4},
+ {__va(spi.s_frequency), (char *)__va(&spi.freq_khz), 4},
+ {__va(spi.s_uart1_baud), (char *)__va(&spi.baudrates[0]), 4},
+ {__va(spi.s_uart2_baud), (char *)__va(&spi.baudrates[1]), 4},
+ {NULL, NULL, -1}
+ },
+#undef CPUENTRY
+#define CPUENTRY(idx) \
+ { /* cpu_properties */ \
+ {__va(spi.s_device_type), __va(spi.s_cpu), 4}, \
+ {__va(spi.s_mid), __va(&spi.mids[idx]), 4}, \
+ {__va(spi.s_frequency), (char *)__va(&spi.freq_khz), 4}, \
+ {NULL, NULL, -1} \
+ }
+ CPUENTRY(1),
+ CPUENTRY(2),
+ CPUENTRY(3),
+ CPUENTRY(4),
+ CPUENTRY(5),
+ CPUENTRY(6),
+ CPUENTRY(7),
+ CPUENTRY(8),
+ CPUENTRY(9),
+ CPUENTRY(10),
+ CPUENTRY(11),
+ CPUENTRY(12),
+ CPUENTRY(13),
+ CPUENTRY(14),
+ CPUENTRY(15),
+ CPUENTRY(16),
+ CPUENTRY(17),
+ CPUENTRY(18),
+ CPUENTRY(19),
+ CPUENTRY(20),
+ CPUENTRY(21),
+ CPUENTRY(22),
+ CPUENTRY(23),
+ CPUENTRY(24),
+ CPUENTRY(25),
+ CPUENTRY(26),
+ CPUENTRY(27),
+ CPUENTRY(28),
+ CPUENTRY(29),
+ CPUENTRY(30),
+ CPUENTRY(31),
+ {
+ 0x01, /* format */
+ M_LEON2 | M_LEON2_SOC, /* machine type */
+ {0, 0, 0, 0, 0, 0}, /* eth */
+ 0, /* date */
+ 0, /* sernum */
+ 0, /* checksum */
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} /* reserved */
+ },
+ {
+ __va(no_nextnode),
+ __va(no_child),
+ __va(no_proplen),
+ __va(no_getprop),
+ __va(no_setprop),
+ __va(no_nextprop)
+ },
+ __va(&spi.totphys),
+ {
+ NULL,
+ (char *)CFG_SDRAM_BASE,
+ 0,
+ },
+ __va(&spi.avail),
+ {
+ NULL,
+ (char *)CFG_SDRAM_BASE,
+ 0,
+ },
+ NULL, /* prommap_p */
+ NULL,
+ __va(&spi.bootargs),
+ {
+ {NULL, __va(spi.arg), NULL /*... */ },
+ /*... */
+ },
+ {
+ 0,
+ 0, /* sun4c v0 prom */
+ 0, 0,
+ {__va(&spi.totphys_p), __va(&spi.prommap_p), __va(&spi.avail_p)},
+ __va(&spi.nodeops),
+ NULL, {NULL /* ... */ },
+ NULL, NULL,
+ NULL, NULL, /* pv_getchar, pv_putchar */
+ __va(leon_nbgetchar), __va(leon_nbputchar),
+ NULL,
+ __va(leon_reboot),
+ NULL,
+ NULL,
+ NULL,
+ __va(leon_halt),
+ __va(&spi.synchook),
+ {NULL},
+ __va(&spi.bootargs_p)
+ /*... */
+ },
+ {
+ {0, __va(spi.root_properties + 3) /* NULL, NULL, -1 */ },
+ {0, __va(spi.root_properties)},
+ /* cpu 0, must be spi.nodes[2] see leon_prom_init() */
+ {1, __va(spi.cpu_properties)},
+
+#undef CPUENTRY
+#define CPUENTRY(idx) \
+ {1, __va(spi.cpu_properties##idx) } /* cpu <idx> */
+ CPUENTRY(1),
+ CPUENTRY(2),
+ CPUENTRY(3),
+ CPUENTRY(4),
+ CPUENTRY(5),
+ CPUENTRY(6),
+ CPUENTRY(7),
+ CPUENTRY(8),
+ CPUENTRY(9),
+ CPUENTRY(10),
+ CPUENTRY(11),
+ CPUENTRY(12),
+ CPUENTRY(13),
+ CPUENTRY(14),
+ CPUENTRY(15),
+ CPUENTRY(16),
+ CPUENTRY(17),
+ CPUENTRY(18),
+ CPUENTRY(19),
+ CPUENTRY(20),
+ CPUENTRY(21),
+ CPUENTRY(22),
+ CPUENTRY(23),
+ CPUENTRY(24),
+ CPUENTRY(25),
+ CPUENTRY(26),
+ CPUENTRY(27),
+ CPUENTRY(28),
+ CPUENTRY(29),
+ CPUENTRY(30),
+ CPUENTRY(31),
+ {-1, __va(spi.root_properties + 3) /* NULL, NULL, -1 */ }
+ },
+ "device_type",
+ "cpu",
+ "mid",
+ "idprom",
+ "compatability",
+ "leon2",
+ "mmu-nctx",
+ "clock-frequency",
+ "uart1_baud",
+ "uart2_baud",
+ CONFIG_DEFAULT_KERNEL_COMMAND_LINE
+};
+
+/* from arch/sparc/kernel/setup.c */
+#define RAMDISK_LOAD_FLAG 0x4000
+extern unsigned short root_flags;
+extern unsigned short root_dev;
+extern unsigned short ram_flags;
+extern unsigned int sparc_ramdisk_image;
+extern unsigned int sparc_ramdisk_size;
+extern int root_mountflags;
+
+extern char initrd_end, initrd_start;
+
+/* Reboot the CPU = jump to beginning of flash again.
+ *
+ * Make sure that all function are inlined here.
+ */
+static void PROM_TEXT leon_reboot(char *bcommand)
+{
+ register char *arg = bcommand;
+ void __attribute__ ((noreturn)) (*reboot_physical) (char *cmd);
+
+ /* get physical address */
+ struct leon_prom_info *pspi =
+ (void *)(CFG_PROM_OFFSET + sizeof(srmmu_tables));
+
+ unsigned int *srmmu_ctx_table;
+
+ /* Turn of Interrupts */
+ set_pil(0xf);
+
+ /* Set kernel's context, context zero */
+ srmmu_set_context(0);
+
+ /* Get physical address of the MMU shutdown routine */
+ reboot_physical = (void *)
+ SPARC_BYPASS_READ(&pspi->reloc_funcs.reboot_physical);
+
+ /* Now that we know the physical address of the function
+ * we can make the MMU allow jumping to it.
+ */
+ srmmu_ctx_table = (unsigned int *)srmmu_get_ctable_ptr();
+
+ srmmu_ctx_table = (unsigned int *)SPARC_BYPASS_READ(srmmu_ctx_table);
+
+ /* get physical address of kernel's context table (assume ptd) */
+ srmmu_ctx_table = (unsigned int *)
+ (((unsigned int)srmmu_ctx_table & 0xfffffffc) << 4);
+
+ /* enable access to physical address of MMU shutdown function */
+ SPARC_BYPASS_WRITE(&srmmu_ctx_table
+ [((unsigned int)reboot_physical) >> 24],
+ (((unsigned int)reboot_physical & 0xff000000) >> 4) |
+ 0x1e);
+
+ /* flush TLB cache */
+ leon_flush_tlb_all();
+
+ /* flash instruction & data cache */
+ sparc_icache_flush_all();
+ sparc_dcache_flush_all();
+
+ /* jump to physical address function
+ * so that when the MMU is disabled
+ * we can continue to execute
+ */
+ reboot_physical(arg);
+}
+
+static void PROM_TEXT leon_reboot_physical(char *bcommand)
+{
+ void __attribute__ ((noreturn)) (*reset) (void);
+
+ /* Turn off MMU */
+ srmmu_set_mmureg(0);
+
+ /* Hardcoded start address */
+ reset = CFG_MONITOR_BASE;
+
+ /* flush data cache */
+ sparc_dcache_flush_all();
+
+ /* flush instruction cache */
+ sparc_icache_flush_all();
+
+ /* Jump to start in Flash */
+ reset();
+}
+
+static void PROM_TEXT leon_halt(void)
+{
+ while (1) ;
+}
+
+/* get single char, don't care for blocking*/
+static int PROM_TEXT leon_nbgetchar(void)
+{
+ return -1;
+}
+
+/* put single char, don't care for blocking*/
+static int PROM_TEXT leon_nbputchar(int c)
+{
+ ambapp_dev_apbuart *uart;
+
+ /* get physical address */
+ struct leon_prom_info *pspi =
+ (void *)(CFG_PROM_OFFSET + sizeof(srmmu_tables));
+
+ uart = (ambapp_dev_apbuart *)
+ SPARC_BYPASS_READ(&pspi->reloc_funcs.leon3_apbuart);
+
+ /* no UART? */
+ if (!uart)
+ return 0;
+
+ /***** put char in buffer... ***********
+ * Make sure all functions are inline! *
+ ***************************************/
+
+ /* Wait for last character to go. */
+ while (!(SPARC_BYPASS_READ(&uart->status)
+ & LEON_REG_UART_STATUS_THE)) ;
+
+ /* Send data */
+ SPARC_BYPASS_WRITE(&uart->data, c);
+
+ /* Wait for data to be sent */
+ while (!(SPARC_BYPASS_READ(&uart->status)
+ & LEON_REG_UART_STATUS_TSE)) ;
+
+ return 0;
+}
+
+/* node ops */
+
+/*#define nodes ((struct node *)__va(&pspi->nodes))*/
+#define nodes ((struct node *)(pspi->nodes))
+
+static int PROM_TEXT no_nextnode(int node)
+{
+ /* get physical address */
+ struct leon_prom_info *pspi =
+ (void *)(CFG_PROM_OFFSET + sizeof(srmmu_tables));
+
+ /* convert into virtual address */
+ pspi = (struct leon_prom_info *)
+ (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
+
+ if (nodes[node].level == nodes[node + 1].level)
+ return node + 1;
+ return -1;
+}
+
+static int PROM_TEXT no_child(int node)
+{
+ /* get physical address */
+ struct leon_prom_info *pspi = (struct leon_prom_info *)
+ (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+
+ /* convert into virtual address */
+ pspi = (struct leon_prom_info *)
+ (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
+
+ if (nodes[node].level == nodes[node + 1].level - 1)
+ return node + 1;
+ return -1;
+}
+
+static struct property PROM_TEXT *find_property(int node, char *name)
+{
+ /* get physical address */
+ struct leon_prom_info *pspi = (struct leon_prom_info *)
+ (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+
+ /* convert into virtual address */
+ pspi = (struct leon_prom_info *)
+ (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
+
+ struct property *prop = &nodes[node].properties[0];
+ while (prop && prop->name) {
+ if (pspi->reloc_funcs.strcmp(prop->name, name) == 0)
+ return prop;
+ prop++;
+ }
+ return NULL;
+}
+
+static int PROM_TEXT no_proplen(int node, char *name)
+{
+ /* get physical address */
+ struct leon_prom_info *pspi = (struct leon_prom_info *)
+ (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+
+ /* convert into virtual address */
+ pspi = (struct leon_prom_info *)
+ (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
+
+ struct property *prop = pspi->reloc_funcs.find_property(node, name);
+ if (prop)
+ return prop->length;
+ return -1;
+}
+
+static int PROM_TEXT no_getprop(int node, char *name, char *value)
+{
+ /* get physical address */
+ struct leon_prom_info *pspi = (struct leon_prom_info *)
+ (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+
+ /* convert into virtual address */
+ pspi = (struct leon_prom_info *)
+ (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
+
+ struct property *prop = pspi->reloc_funcs.find_property(node, name);
+ if (prop) {
+ pspi->reloc_funcs.memcpy(value, prop->value, prop->length);
+ return 1;
+ }
+ return -1;
+}
+
+static int PROM_TEXT no_setprop(int node, char *name, char *value, int len)
+{
+ return -1;
+}
+
+static char PROM_TEXT *no_nextprop(int node, char *name)
+{
+ /* get physical address */
+ struct leon_prom_info *pspi = (struct leon_prom_info *)
+ (CFG_PROM_OFFSET + sizeof(srmmu_tables));
+ struct property *prop;
+
+ /* convert into virtual address */
+ pspi = (struct leon_prom_info *)
+ (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
+
+ if (!name || !name[0])
+ return nodes[node].properties[0].name;
+
+ prop = pspi->reloc_funcs.find_property(node, name);
+ if (prop)
+ return prop[1].name;
+ return NULL;
+}
+
+static int PROM_TEXT leon_strcmp(const char *s1, const char *s2)
+{
+ register char result;
+
+ while (1) {
+ result = *s1 - *s2;
+ if (result || !*s1)
+ break;
+ s2++;
+ s1++;
+ }
+
+ return result;
+}
+
+static void *PROM_TEXT leon_memcpy(void *dest, const void *src, size_t n)
+{
+ char *dst = (char *)dest, *source = (char *)src;
+
+ while (n--) {
+ *dst = *source;
+ dst++;
+ source++;
+ }
+ return dest;
+}
+
+#define GETREGSP(sp) __asm__ __volatile__("mov %%sp, %0" : "=r" (sp))
+
+void leon_prom_init(struct leon_prom_info *pspi)
+{
+ unsigned long i;
+ unsigned char cksum, *ptr;
+ char *addr_str, *end;
+ unsigned long sp;
+ GETREGSP(sp);
+
+ pspi->freq_khz = CONFIG_SYS_CLK_FREQ / 1000;
+
+ /* Set Available main memory size */
+ pspi->totphys.num_bytes = CFG_PROM_OFFSET - CFG_SDRAM_BASE;
+ pspi->avail.num_bytes = pspi->totphys.num_bytes;
+
+ /* Set the pointer to the Console UART in romvec */
+ pspi->reloc_funcs.leon3_apbuart = leon3_apbuart;
+
+ {
+ int j = 1;
+#ifdef CONFIG_SMP
+ ambapp_dev_irqmp *b;
+ b = (ambapp_dev_irqmp *) leon3_getapbbase(VENDOR_GAISLER,
+ GAISLER_IRQMP);
+ if (b) {
+ j = 1 + ((LEON3_BYPASS_LOAD_PA(&(b->mpstatus))
+ >> LEON3_IRQMPSTATUS_CPUNR) & 0xf);
+ }
+#endif
+#undef nodes
+ pspi->nodes[2 + j].level = -1;
+ pspi->nodes[2 + j].properties = __va(spi.root_properties + 3);
+ }
+
+ /* Set Ethernet MAC address from environment */
+ if ((addr_str = getenv("ethaddr")) != NULL) {
+ for (i = 0; i < 6; i++) {
+ pspi->idprom.id_ethaddr[i] = addr_str ?
+ simple_strtoul(addr_str, &end, 16) : 0;
+ if (addr_str) {
+ addr_str = (*end) ? end + 1 : end;
+ }
+ }
+ } else {
+ /* HW Address not found in environment,
+ * Set default HW address
+ */
+ pspi->idprom.id_ethaddr[0] = 0;
+ pspi->idprom.id_ethaddr[1] = 0;
+ pspi->idprom.id_ethaddr[2] = 0;
+ pspi->idprom.id_ethaddr[3] = 0;
+ pspi->idprom.id_ethaddr[4] = 0;
+ pspi->idprom.id_ethaddr[5] = 0;
+ }
+
+ ptr = (unsigned char *)&pspi->idprom;
+ for (i = cksum = 0; i <= 0x0E; i++)
+ cksum ^= *ptr++;
+ pspi->idprom.id_cksum = cksum;
+}
+
+static inline void set_cache(unsigned long regval)
+{
+ asm volatile ("sta %0, [%%g0] %1\n\t":: "r" (regval), "i"(2):"memory");
+}
+
+extern unsigned short bss_start, bss_end;
+
+/* mark as section .img.main.text, to be referenced in linker script */
+int prom_init(void)
+{
+ struct leon_prom_info *pspi = (void *)
+ ((((unsigned int)&spi) & PROM_SIZE_MASK) + CFG_PROM_OFFSET);
+
+ /* disable mmu */
+ srmmu_set_mmureg(0x00000000);
+ __asm__ __volatile__("flush\n\t");
+
+ /* init prom info struct */
+ leon_prom_init(pspi);
+
+ kernel_arg_promvec = &pspi->romvec;
+#ifdef PRINT_ROM_VEC
+ printf("Kernel rom vec: 0x%lx\n", (unsigned int)(&pspi->romvec));
+#endif
+ return 0;
+}
+
+/* Copy current kernel boot argument to ROMvec */
+void prepare_bootargs(char *bootargs)
+{
+ struct leon_prom_info *pspi;
+ char *src, *dst;
+ int left;
+
+ /* if no bootargs set, skip copying ==> default bootline */
+ if (bootargs && (*bootargs != '\0')) {
+ pspi = (void *)((((unsigned int)&spi) & PROM_SIZE_MASK) +
+ CFG_PROM_OFFSET);
+ src = bootargs;
+ dst = &pspi->arg[0];
+ left = 255; /* max len */
+ while (*src && left > 0) {
+ *dst++ = *src++;
+ left--;
+ }
+ /* terminate kernel command line string */
+ *dst = 0;
+ }
+}
+
+void srmmu_init_cpu(unsigned int entry)
+{
+ sparc_srmmu_setup *psrmmu_tables = (void *)
+ ((((unsigned int)&srmmu_tables) & PROM_SIZE_MASK) +
+ CFG_PROM_OFFSET);
+
+ /* Make context 0 (kernel's context) point
+ * to our prepared memory mapping
+ */
+#define PTD 1
+ psrmmu_tables->ctx_table[0] =
+ ((unsigned int)&psrmmu_tables->pgd_table[0x00]) >> 4 | PTD;
+
+ /* Set virtual kernel address 0xf0000000
+ * to SRAM/SDRAM address.
+ * Make it READ/WRITE/EXEC to SuperUser
+ */
+#define PTE 2
+#define ACC_SU_ALL 0x1c
+ psrmmu_tables->pgd_table[0xf0] =
+ (CFG_SDRAM_BASE >> 4) | ACC_SU_ALL | PTE;
+ psrmmu_tables->pgd_table[0xf1] =
+ ((CFG_SDRAM_BASE + 0x1000000) >> 4) | ACC_SU_ALL | PTE;
+ psrmmu_tables->pgd_table[0xf2] =
+ ((CFG_SDRAM_BASE + 0x2000000) >> 4) | ACC_SU_ALL | PTE;
+ psrmmu_tables->pgd_table[0xf3] =
+ ((CFG_SDRAM_BASE + 0x3000000) >> 4) | ACC_SU_ALL | PTE;
+ psrmmu_tables->pgd_table[0xf4] =
+ ((CFG_SDRAM_BASE + 0x4000000) >> 4) | ACC_SU_ALL | PTE;
+ psrmmu_tables->pgd_table[0xf5] =
+ ((CFG_SDRAM_BASE + 0x5000000) >> 4) | ACC_SU_ALL | PTE;
+ psrmmu_tables->pgd_table[0xf6] =
+ ((CFG_SDRAM_BASE + 0x6000000) >> 4) | ACC_SU_ALL | PTE;
+ psrmmu_tables->pgd_table[0xf7] =
+ ((CFG_SDRAM_BASE + 0x7000000) >> 4) | ACC_SU_ALL | PTE;
+
+ /* convert rom vec pointer to virtual address */
+ kernel_arg_promvec = (struct linux_romvec *)
+ (((unsigned int)kernel_arg_promvec & 0x0fffffff) | 0xf0000000);
+
+ /* Set Context pointer to point to context table
+ * 256 contexts supported.
+ */
+ srmmu_set_ctable_ptr((unsigned int)&psrmmu_tables->ctx_table[0]);
+
+ /* Set kernel's context, context zero */
+ srmmu_set_context(0);
+
+ /* Invalidate all Cache */
+ __asm__ __volatile__("flush\n\t");
+
+ srmmu_set_mmureg(0x00000001);
+ leon_flush_tlb_all();
+ leon_flush_cache_all();
+}
--- /dev/null
+/* GRLIB APBUART Serial controller driver
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/leon.h>
+#include <ambapp.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Force cache miss each time a serial controller reg is read */
+#define CACHE_BYPASS 1
+
+#ifdef CACHE_BYPASS
+#define READ_BYTE(var) SPARC_NOCACHE_READ_BYTE((unsigned int)&(var))
+#define READ_HWORD(var) SPARC_NOCACHE_READ_HWORD((unsigned int)&(var))
+#define READ_WORD(var) SPARC_NOCACHE_READ((unsigned int)&(var))
+#define READ_DWORD(var) SPARC_NOCACHE_READ_DWORD((unsigned int)&(var))
+#endif
+
+ambapp_dev_apbuart *leon3_apbuart = NULL;
+
+int serial_init(void)
+{
+ ambapp_apbdev apbdev;
+ unsigned int tmp;
+
+ /* find UART */
+ if (ambapp_apb_first(VENDOR_GAISLER, GAISLER_APBUART, &apbdev) == 1) {
+
+ leon3_apbuart = (ambapp_dev_apbuart *) apbdev.address;
+
+ /* found apbuart, let's init...
+ *
+ * Set scaler / baud rate
+ *
+ * Receiver & transmitter enable
+ */
+ leon3_apbuart->scaler = CFG_GRLIB_APBUART_SCALER;
+
+ /* Let bit 11 be unchanged (debug bit for GRMON) */
+ tmp = READ_WORD(leon3_apbuart->ctrl);
+
+ leon3_apbuart->ctrl = ((tmp & LEON_REG_UART_CTRL_DBG) |
+ LEON_REG_UART_CTRL_RE |
+ LEON_REG_UART_CTRL_TE);
+
+ return 0;
+ }
+ return -1; /* didn't find hardware */
+}
+
+void serial_putc(const char c)
+{
+ if (c == '\n')
+ serial_putc_raw('\r');
+
+ serial_putc_raw(c);
+}
+
+void serial_putc_raw(const char c)
+{
+ if (!leon3_apbuart)
+ return;
+
+ /* Wait for last character to go. */
+ while (!(READ_WORD(leon3_apbuart->status) & LEON_REG_UART_STATUS_THE)) ;
+
+ /* Send data */
+ leon3_apbuart->data = c;
+
+#ifdef LEON_DEBUG
+ /* Wait for data to be sent */
+ while (!(READ_WORD(leon3_apbuart->status) & LEON_REG_UART_STATUS_TSE)) ;
+#endif
+}
+
+void serial_puts(const char *s)
+{
+ while (*s) {
+ serial_putc(*s++);
+ }
+}
+
+int serial_getc(void)
+{
+ if (!leon3_apbuart)
+ return 0;
+
+ /* Wait for a character to arrive. */
+ while (!(READ_WORD(leon3_apbuart->status) & LEON_REG_UART_STATUS_DR)) ;
+
+ /* read data */
+ return READ_WORD(leon3_apbuart->data);
+}
+
+int serial_tstc(void)
+{
+ if (leon3_apbuart)
+ return (READ_WORD(leon3_apbuart->status) &
+ LEON_REG_UART_STATUS_DR);
+ return 0;
+}
+
+/* set baud rate for uart */
+void serial_setbrg(void)
+{
+ /* update baud rate settings, read it from gd->baudrate */
+ unsigned int scaler;
+ if (leon3_apbuart && (gd->baudrate > 0)) {
+ scaler =
+ (((CONFIG_SYS_CLK_FREQ * 10) / (gd->baudrate * 8)) -
+ 5) / 10;
+ leon3_apbuart->scaler = scaler;
+ }
+ return;
+}
--- /dev/null
+/* This is where the SPARC/LEON3 starts
+ * Copyright (C) 2007,
+ * Daniel Hellstrom, daniel@gaisler.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/asmmacro.h>
+#include <asm/winmacro.h>
+#include <asm/psr.h>
+#include <asm/stack.h>
+#include <asm/leon.h>
+#include <version.h>
+
+/* Entry for traps which jump to a programmer-specified trap handler. */
+#define TRAPR(H) \
+ wr %g0, 0xfe0, %psr; \
+ mov %g0, %tbr; \
+ ba (H); \
+ mov %g0, %wim;
+
+#define TRAP(H) \
+ mov %psr, %l0; \
+ ba (H); \
+ nop; nop;
+
+#define TRAPI(ilevel) \
+ mov ilevel, %l7; \
+ mov %psr, %l0; \
+ b _irq_entry; \
+ mov %wim, %l3
+
+/* Unexcpected trap will halt the processor by forcing it to error state */
+#undef BAD_TRAP
+#define BAD_TRAP ta 0; nop; nop; nop;
+
+/* Software trap. Treat as BAD_TRAP for the time being... */
+#define SOFT_TRAP TRAP(_hwerr)
+
+#define PSR_INIT 0x1FC0 /* Disable traps, set s and ps */
+#define WIM_INIT 2
+
+/* All traps low-level code here must end with this macro. */
+#define RESTORE_ALL b ret_trap_entry; clr %l6;
+
+#define WRITE_PAUSE nop;nop;nop
+
+WINDOWSIZE = (16 * 4)
+ARGPUSHSIZE = (6 * 4)
+ARGPUSH = (WINDOWSIZE + 4)
+MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4)
+
+/* Number of register windows */
+#ifndef CFG_SPARC_NWINDOWS
+#error Must define number of SPARC register windows, default is 8
+#endif
+
+#define STACK_ALIGN 8
+#define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1))
+
+ .section ".start", "ax"
+ .globl _start, start, _trap_table
+ .globl _irq_entry, nmi_trap
+ .globl _reset_reloc
+
+/* at address 0
+ * Hardware traps
+ */
+start:
+_start:
+_trap_table:
+ TRAPR(_hardreset); ! 00 reset trap
+ BAD_TRAP; ! 01 instruction_access_exception
+ BAD_TRAP; ! 02 illegal_instruction
+ BAD_TRAP; ! 03 priveleged_instruction
+ BAD_TRAP; ! 04 fp_disabled
+ TRAP(_window_overflow); ! 05 window_overflow
+ TRAP(_window_underflow); ! 06 window_underflow
+ BAD_TRAP; ! 07 Memory Address Not Aligned
+ BAD_TRAP; ! 08 Floating Point Exception
+ BAD_TRAP; ! 09 Data Miss Exception
+ BAD_TRAP; ! 0a Tagged Instruction Ovrflw
+ BAD_TRAP; ! 0b Watchpoint Detected
+ BAD_TRAP; ! 0c
+ BAD_TRAP; ! 0d
+ BAD_TRAP; ! 0e
+ BAD_TRAP; ! 0f
+ BAD_TRAP; ! 10
+ TRAPI(1); ! 11 IRQ level 1
+ TRAPI(2); ! 12 IRQ level 2
+ TRAPI(3); ! 13 IRQ level 3
+ TRAPI(4); ! 14 IRQ level 4
+ TRAPI(5); ! 15 IRQ level 5
+ TRAPI(6); ! 16 IRQ level 6
+ TRAPI(7); ! 17 IRQ level 7
+ TRAPI(8); ! 18 IRQ level 8
+ TRAPI(9); ! 19 IRQ level 9
+ TRAPI(10); ! 1a IRQ level 10
+ TRAPI(11); ! 1b IRQ level 11
+ TRAPI(12); ! 1c IRQ level 12
+ TRAPI(13); ! 1d IRQ level 13
+ TRAPI(14); ! 1e IRQ level 14
+ TRAP(_nmi_trap); ! 1f IRQ level 15 /
+ ! NMI (non maskable interrupt)
+ BAD_TRAP; ! 20 r_register_access_error
+ BAD_TRAP; ! 21 instruction access error
+ BAD_TRAP; ! 22
+ BAD_TRAP; ! 23
+ BAD_TRAP; ! 24 co-processor disabled
+ BAD_TRAP; ! 25 uniplemented FLUSH
+ BAD_TRAP; ! 26
+ BAD_TRAP; ! 27
+ BAD_TRAP; ! 28 co-processor exception
+ BAD_TRAP; ! 29 data access error
+ BAD_TRAP; ! 2a division by zero
+ BAD_TRAP; ! 2b data store error
+ BAD_TRAP; ! 2c data access MMU miss
+ BAD_TRAP; ! 2d
+ BAD_TRAP; ! 2e
+ BAD_TRAP; ! 2f
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 30-33
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 34-37
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 38-3b
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 3c-3f
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 40-43
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 44-47
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 48-4b
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 4c-4f
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 50-53
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 54-57
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 58-5b
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 5c-5f
+
+ /* implementaion dependent */
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 60-63
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 64-67
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 68-6b
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 6c-6f
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 70-73
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 74-77
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 78-7b
+ BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 7c-7f
+
+ /* Software traps, not handled */
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 80-83
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 84-87
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 88-8b
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 8c-8f
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 90-93
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 94-97
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 98-9b
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! 9c-9f
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a0-a3
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a4-a7
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! a8-ab
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! ac-af
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b0-b3
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b4-b7
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! b8-bb
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! bc-bf
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c0-c3
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c4-c7
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! c8-cb
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! cc-cf
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d0-d3
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d4-d7
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! d8-db
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! dc-df
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e0-e3
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e4-e7
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! e8-eb
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! ec-ef
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f0-f3
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f4-f7
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! f8-fb
+ SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; ! fc-ff
+/*
+ * Version string
+ */
+
+ .data
+ .extern leon3_snooping_avail
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", __DATE__, " - ", __TIME__, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
+
+ .section ".text"
+ .align 4
+
+_hardreset:
+1000:
+ flush
+
+ /* Enable I/D-Cache and Snooping */
+ set 0x0081000f, %g2
+ sta %g2, [%g0] 2
+
+ mov %g0, %y
+ clr %g1
+ clr %g2
+ clr %g3
+ clr %g4
+ clr %g5
+ clr %g6
+ clr %g7
+
+ mov %asr17, %g3
+ and %g3, 0x1f, %g3
+clear_window:
+ mov %g0, %l0
+ mov %g0, %l1
+ mov %g0, %l2
+ mov %g0, %l3
+ mov %g0, %l4
+ mov %g0, %l5
+ mov %g0, %l6
+ mov %g0, %l7
+ mov %g0, %o0
+ mov %g0, %o1
+ mov %g0, %o2
+ mov %g0, %o3
+ mov %g0, %o4
+ mov %g0, %o5
+ mov %g0, %o6
+ mov %g0, %o7
+ subcc %g3, 1, %g3
+ bge clear_window
+ save
+
+wininit:
+ set WIM_INIT, %g3
+ mov %g3, %wim
+
+stackp:
+ set CFG_INIT_SP_OFFSET, %fp
+ andn %fp, 0x0f, %fp
+ sub %fp, 64, %sp
+
+cpu_init_unreloc:
+ call cpu_init_f
+ nop
+
+/* un relocated start address of monitor */
+#define TEXT_START _text
+
+/* un relocated end address of monitor */
+#define DATA_END __init_end
+
+reloc:
+ set TEXT_START,%g2
+ set DATA_END,%g3
+ set CFG_RELOC_MONITOR_BASE,%g4
+reloc_loop:
+ ldd [%g2],%l0
+ ldd [%g2+8],%l2
+ std %l0,[%g4]
+ std %l2,[%g4+8]
+ inc 16,%g2
+ subcc %g3,%g2,%g0
+ bne reloc_loop
+ inc 16,%g4
+
+ clr %l0
+ clr %l1
+ clr %l2
+ clr %l3
+ clr %g2
+
+/* register g4 contain address to start
+ * This means that BSS must be directly after data and code segments
+ *
+ * g3 is length of bss = (__bss_end-__bss_start)
+ *
+ */
+
+clr_bss:
+/* clear bss area (the relocated) */
+ set __bss_start,%g2
+ set __bss_end,%g3
+ sub %g3,%g2,%g3
+ add %g3,%g4,%g3
+ clr %g1 /* std %g0 uses g0 and g1 */
+/* clearing 16byte a time ==> linker script need to align to 16 byte offset */
+clr_bss_16:
+ std %g0,[%g4]
+ std %g0,[%g4+8]
+ inc 16,%g4
+ cmp %g3,%g4
+ bne clr_bss_16
+ nop
+
+/* add offsets to GOT table */
+fixup_got:
+ set __got_start,%g4
+ set __got_end,%g3
+/*
+ * new got offset = (old GOT-PTR (read with ld) -
+ * CFG_RELOC_MONITOR_BASE(from define) ) +
+ * Destination Address (from define)
+ */
+ set CFG_RELOC_MONITOR_BASE,%g2
+ set TEXT_START, %g1
+ add %g4,%g2,%g4
+ sub %g4,%g1,%g4
+ add %g3,%g2,%g3
+ sub %g3,%g1,%g3
+ sub %g2,%g1,%g2 ! prepare register with (new base address) -
+ ! (old base address)
+got_loop:
+ ld [%g4],%l0 ! load old GOT-PTR
+ add %l0,%g2,%l0 ! increase with (new base address) -
+ ! (old base)
+ st %l0,[%g4]
+ inc 4,%g4
+ cmp %g3,%g4
+ bne got_loop
+ nop
+
+prom_relocate:
+ set __prom_start, %g2
+ set __prom_end, %g3
+ set CFG_PROM_OFFSET, %g4
+
+prom_relocate_loop:
+ ldd [%g2],%l0
+ ldd [%g2+8],%l2
+ std %l0,[%g4]
+ std %l2,[%g4+8]
+ inc 16,%g2
+ subcc %g3,%g2,%g0
+ bne prom_relocate_loop
+ inc 16,%g4
+
+/* Trap table has been moved, lets tell CPU about
+ * the new trap table address
+ */
+
+ set CFG_RELOC_MONITOR_BASE, %g2
+ wr %g0, %g2, %tbr
+ nop
+ nop
+ nop
+
+/* If CACHE snooping is available in hardware the
+ * variable leon3_snooping_avail will be set to
+ * 0x800000 else 0.
+ */
+snoop_detect:
+ sethi %hi(0x00800000), %o0
+ lda [%g0] 2, %o1
+ and %o0, %o1, %o0
+ sethi %hi(leon3_snooping_avail+CFG_RELOC_MONITOR_BASE-TEXT_BASE), %o1
+ st %o0, [%lo(leon3_snooping_avail+CFG_RELOC_MONITOR_BASE-TEXT_BASE)+%o1]
+
+/* call relocate*/
+ nop
+/* Call relocated init functions */
+jump:
+ set cpu_init_f2,%o1
+ set CFG_RELOC_MONITOR_BASE,%o2
+ add %o1,%o2,%o1
+ sub %o1,%g1,%o1
+ call %o1
+ clr %o0
+
+ set board_init_f,%o1
+ set CFG_RELOC_MONITOR_BASE,%o2
+ add %o1,%o2,%o1
+ sub %o1,%g1,%o1
+ call %o1
+ clr %o0
+
+dead: ta 0 ! if call returns...
+ nop
+
+/* Interrupt handler caller,
+ * reg L7: interrupt number
+ * reg L0: psr after interrupt
+ * reg L1: PC
+ * reg L2: next PC
+ * reg L3: wim
+ */
+_irq_entry:
+ SAVE_ALL
+
+ or %l0, PSR_PIL, %g2
+ wr %g2, 0x0, %psr
+ WRITE_PAUSE
+ wr %g2, PSR_ET, %psr
+ WRITE_PAUSE
+ mov %l7, %o0 ! irq level
+ set handler_irq, %o1
+ set (CFG_RELOC_MONITOR_BASE-TEXT_BASE), %o2
+ add %o1, %o2, %o1
+ call %o1
+ add %sp, SF_REGS_SZ, %o1 ! pt_regs ptr
+ or %l0, PSR_PIL, %g2 ! restore PIL after handler_irq
+ wr %g2, PSR_ET, %psr ! keep ET up
+ WRITE_PAUSE
+
+ RESTORE_ALL
+
+!Window overflow trap handler.
+ .global _window_overflow
+
+_window_overflow:
+
+ mov %wim, %l3 ! Calculate next WIM
+ mov %g1, %l7
+ srl %l3, 1, %g1
+ sll %l3, (CFG_SPARC_NWINDOWS-1) , %l4
+ or %l4, %g1, %g1
+
+ save ! Get into window to be saved.
+ mov %g1, %wim
+ nop;
+ nop;
+ nop
+ st %l0, [%sp + 0];
+ st %l1, [%sp + 4];
+ st %l2, [%sp + 8];
+ st %l3, [%sp + 12];
+ st %l4, [%sp + 16];
+ st %l5, [%sp + 20];
+ st %l6, [%sp + 24];
+ st %l7, [%sp + 28];
+ st %i0, [%sp + 32];
+ st %i1, [%sp + 36];
+ st %i2, [%sp + 40];
+ st %i3, [%sp + 44];
+ st %i4, [%sp + 48];
+ st %i5, [%sp + 52];
+ st %i6, [%sp + 56];
+ st %i7, [%sp + 60];
+ restore ! Go back to trap window.
+ mov %l7, %g1
+ jmp %l1 ! Re-execute save.
+ rett %l2
+
+/* Window underflow trap handler. */
+
+ .global _window_underflow
+
+_window_underflow:
+
+ mov %wim, %l3 ! Calculate next WIM
+ sll %l3, 1, %l4
+ srl %l3, (CFG_SPARC_NWINDOWS-1), %l5
+ or %l5, %l4, %l5
+ mov %l5, %wim
+ nop; nop; nop
+ restore ! Two restores to get into the
+ restore ! window to restore
+ ld [%sp + 0], %l0; ! Restore window from the stack
+ ld [%sp + 4], %l1;
+ ld [%sp + 8], %l2;
+ ld [%sp + 12], %l3;
+ ld [%sp + 16], %l4;
+ ld [%sp + 20], %l5;
+ ld [%sp + 24], %l6;
+ ld [%sp + 28], %l7;
+ ld [%sp + 32], %i0;
+ ld [%sp + 36], %i1;
+ ld [%sp + 40], %i2;
+ ld [%sp + 44], %i3;
+ ld [%sp + 48], %i4;
+ ld [%sp + 52], %i5;
+ ld [%sp + 56], %i6;
+ ld [%sp + 60], %i7;
+ save ! Get back to the trap window.
+ save
+ jmp %l1 ! Re-execute restore.
+ rett %l2
+
+ retl
+
+_nmi_trap:
+ nop
+ jmp %l1
+ rett %l2
+
+_hwerr:
+ ta 0
+ nop
+ nop
+ b _hwerr ! loop infinite
+ nop
+
+/* Registers to not touch at all. */
+#define t_psr l0 /* Set by caller */
+#define t_pc l1 /* Set by caller */
+#define t_npc l2 /* Set by caller */
+#define t_wim l3 /* Set by caller */
+#define t_twinmask l4 /* Set at beginning of this entry routine. */
+#define t_kstack l5 /* Set right before pt_regs frame is built */
+#define t_retpc l6 /* If you change this, change winmacro.h header file */
+#define t_systable l7 /* Never touch this, could be the syscall table ptr. */
+#define curptr g6 /* Set after pt_regs frame is built */
+
+trap_setup:
+/* build a pt_regs trap frame. */
+ sub %fp, (SF_REGS_SZ + PT_REGS_SZ), %t_kstack
+ PT_STORE_ALL(t_kstack, t_psr, t_pc, t_npc, g2)
+
+ /* See if we are in the trap window. */
+ mov 1, %t_twinmask
+ sll %t_twinmask, %t_psr, %t_twinmask ! t_twinmask = (1 << psr)
+ andcc %t_twinmask, %t_wim, %g0
+ beq 1f ! in trap window, clean up
+ nop
+
+ /*-------------------------------------------------
+ * Spill , adjust %wim and go.
+ */
+ srl %t_wim, 0x1, %g2 ! begin computation of new %wim
+
+ set (CFG_SPARC_NWINDOWS-1), %g3 !NWINDOWS-1
+
+ sll %t_wim, %g3, %t_wim ! NWINDOWS-1
+ or %t_wim, %g2, %g2
+ and %g2, 0xff, %g2
+
+ save %g0, %g0, %g0 ! get in window to be saved
+
+ /* Set new %wim value */
+ wr %g2, 0x0, %wim
+
+ /* Save the kernel window onto the corresponding stack. */
+ RW_STORE(sp)
+
+ restore %g0, %g0, %g0
+ /*-------------------------------------------------*/
+
+1:
+ /* Trap from kernel with a window available.
+ * Just do it...
+ */
+ jmpl %t_retpc + 0x8, %g0 ! return to caller
+ mov %t_kstack, %sp ! jump onto new stack
+
+#define twin_tmp1 l4
+#define glob_tmp g4
+#define curptr g6
+ret_trap_entry:
+ wr %t_psr, 0x0, %psr ! enable nesting again, clear ET
+
+ /* Will the rett land us in the invalid window? */
+ mov 2, %g1
+ sll %g1, %t_psr, %g1
+
+ set CFG_SPARC_NWINDOWS, %g2 !NWINDOWS
+
+ srl %g1, %g2, %g2
+ or %g1, %g2, %g1
+ rd %wim, %g2
+ andcc %g2, %g1, %g0
+ be 1f ! Nope, just return from the trap
+ sll %g2, 0x1, %g1
+
+ /* We have to grab a window before returning. */
+ set (CFG_SPARC_NWINDOWS-1), %g3 !NWINDOWS-1
+
+ srl %g2, %g3, %g2
+ or %g1, %g2, %g1
+ and %g1, 0xff, %g1
+
+ wr %g1, 0x0, %wim
+
+ /* Grrr, make sure we load from the right %sp... */
+ PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1)
+
+ restore %g0, %g0, %g0
+ RW_LOAD(sp)
+ b 2f
+ save %g0, %g0, %g0
+
+ /* Reload the entire frame in case this is from a
+ * kernel system call or whatever...
+ */
+1:
+ PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1)
+2:
+ wr %t_psr, 0x0, %psr
+ nop;
+ nop;
+ nop
+
+ jmp %t_pc
+ rett %t_npc
+
+/* This is called from relocated C-code.
+ * It resets the system by jumping to _start
+ */
+_reset_reloc:
+ set start, %l0
+ call %l0
+ nop
--- /dev/null
+/*
+ * Part of this code has been derived from linux:
+ * Universal Host Controller Interface driver for USB (take II).
+ *
+ * (c) 1999-2001 Georg Acher, acher@in.tum.de (executive slave) (base guitar)
+ * Deti Fliegl, deti@fliegl.de (executive slave) (lead voice)
+ * Thomas Sailer, sailer@ife.ee.ethz.ch (chief consultant) (cheer leader)
+ * Roman Weissgaerber, weissg@vienna.at (virt root hub) (studio porter)
+ * (c) 2000 Yggdrasil Computing, Inc. (port of new PCI interface support
+ * from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
+ * (C) 2000 David Brownell, david-b@pacbell.net (usb-ohci.c)
+ *
+ * HW-initalization based on material of
+ *
+ * (C) Copyright 1999 Linus Torvalds
+ * (C) Copyright 1999 Johannes Erdfelt
+ * (C) Copyright 1999 Randy Dunlap
+ * (C) Copyright 1999 Gregory P. Smith
+ *
+ *
+ * Adapted for U-Boot:
+ * (C) Copyright 2001 Denis Peter, MPL AG Switzerland
+ * (C) Copyright 2008, Daniel Hellström, daniel@gaisler.com
+ * Added AMBA Plug&Play detection of GRUSB, modified interrupt handler.
+ * Added cache flushes where needed.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ */
+
+/**********************************************************************
+ * How it works:
+ * -------------
+ * The framelist / Transfer descriptor / Queue Heads are similar like
+ * in the linux usb_uhci.c.
+ *
+ * During initialization, the following skeleton is allocated in init_skel:
+ *
+ * framespecific | common chain
+ *
+ * framelist[]
+ * [ 0 ]-----> TD ---------\
+ * [ 1 ]-----> TD ----------> TD ------> QH -------> QH -------> QH ---> NULL
+ * ... TD ---------/
+ * [1023]-----> TD --------/
+ *
+ * ^^ ^^ ^^ ^^ ^^
+ * 7 TDs for 1 TD for Start of Start of End Chain
+ * INT (2-128ms) 1ms-INT CTRL Chain BULK Chain
+ *
+ *
+ * Since this is a bootloader, the isochronous transfer descriptor have been removed.
+ *
+ * Interrupt Transfers.
+ * --------------------
+ * For Interupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They
+ * will be inserted after the appropriate (depending the interval setting) skeleton TD.
+ * If an interrupt has been detected the dev->irqhandler is called. The status and number
+ * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the
+ * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned,
+ * the interrupt TD will be reactivated.
+ *
+ * Control Transfers
+ * -----------------
+ * Control Transfers are issued by filling the tmp_td with the appropriate data and connect
+ * them to the qh_cntrl queue header. Before other control/bulk transfers can be issued,
+ * the programm has to wait for completion. This does not allows asynchronous data transfer.
+ *
+ * Bulk Transfers
+ * --------------
+ * Bulk Transfers are issued by filling the tmp_td with the appropriate data and connect
+ * them to the qh_bulk queue header. Before other control/bulk transfers can be issued,
+ * the programm has to wait for completion. This does not allows asynchronous data transfer.
+ *
+ *
+ */
+
+#include <common.h>
+#include <ambapp.h>
+#include <asm/leon.h>
+#include <asm/leon3.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_USB_UHCI
+
+#include <usb.h>
+#include "usb_uhci.h"
+
+#define USB_MAX_TEMP_TD 128 /* number of temporary TDs for bulk and control transfers */
+#define USB_MAX_TEMP_INT_TD 32 /* number of temporary TDs for Interrupt transfers */
+
+extern int leon3_snooping_avail;
+/*
+#define out16r(address,data) (*(unsigned short *)(address) = \
+ (unsigned short)( \
+ (((unsigned short)(data)&0xff)<<8) | \
+ (((unsigned short)(data)&0xff00)>>8) \
+ ))
+ */
+#define out16r(address,data) _out16r((unsigned int)(address), (unsigned short)(data))
+void _out16r(unsigned int address, unsigned short data)
+{
+ unsigned short val = (unsigned short)((((unsigned short)(data) & 0xff)
+ << 8) | (((unsigned short)(data)
+ & 0xff00) >> 8));
+#ifdef UHCI_DEBUG_REGS
+ printf("out16r(0x%lx,0x%04x = 0x%04x)\n", address, val, data);
+#endif
+ *(unsigned short *)(address) = val;
+}
+
+#define out32r(address,data) _out32r((unsigned int)(address), (unsigned int)(data))
+void _out32r(unsigned int address, unsigned int data)
+{
+ unsigned int val = (unsigned int)((((unsigned int)(data) & 0x000000ff)
+ << 24) | (((unsigned int)(data) &
+ 0x0000ff00) << 8) |
+ (((unsigned int)(data) & 0x00ff0000)
+ >> 8) | (((unsigned int)(data) &
+ 0xff000000) >> 24));
+#ifdef UHCI_DEBUG_REGS
+ printf("out32r(0x%lx,0x%lx = 0x%lx)\n", address, val, data);
+#endif
+ *(unsigned int *)address = val;
+}
+
+#define in16r(address) _in16r((unsigned int)(address))
+unsigned short _in16r(unsigned int address)
+{
+ unsigned short val = sparc_load_reg_cachemiss_word(address);
+ val = ((val << 8) & 0xff00) | ((val >> 8) & 0xff);
+#ifdef UHCI_DEBUG_REGS
+ printf("in16r(0x%lx): 0x%04x\n", address, val);
+#endif
+ return val;
+}
+
+#define in32r(address) _in32r((unsigned int)(address))
+unsigned int _in32r(unsigned int address)
+{
+ unsigned int val = sparc_load_reg_cachemiss(address);
+ val =
+ ((val << 24) & 0xff000000) | ((val << 8) & 0xff0000) | ((val >> 8) &
+ 0xff00) |
+ ((val >> 24) & 0xff);
+#ifdef UHCI_DEBUG_REGS
+ printf("in32r(0x%lx): 0x%08x\n", address, val);
+#endif
+ return val;
+}
+
+#define READ32(address) sparc_load_reg_cachemiss((unsigned int)(address))
+
+/*#define USB_UHCI_DEBUG*/
+#undef USB_UHCI_DEBUG
+
+void usb_show_td(int max);
+#ifdef USB_UHCI_DEBUG
+void grusb_show_regs(void);
+#define USB_UHCI_PRINTF(fmt,args...) printf (fmt ,##args)
+#else
+#define USB_UHCI_PRINTF(fmt,args...)
+#endif
+
+static int grusb_irq = -1; /* irq vector, if -1 uhci is stopped / reseted */
+unsigned int usb_base_addr; /* base address */
+
+static uhci_td_t td_int[8] __attribute__ ((aligned(16))); /* Interrupt Transfer descriptors */
+static uhci_qh_t qh_cntrl __attribute__ ((aligned(16))); /* control Queue Head */
+static uhci_qh_t qh_bulk __attribute__ ((aligned(16))); /* bulk Queue Head */
+static uhci_qh_t qh_end __attribute__ ((aligned(16))); /* end Queue Head */
+static uhci_td_t td_last __attribute__ ((aligned(16))); /* last TD (linked with end chain) */
+
+/* temporary tds */
+static uhci_td_t tmp_td[USB_MAX_TEMP_TD] __attribute__ ((aligned(16))); /* temporary bulk/control td's */
+static uhci_td_t tmp_int_td[USB_MAX_TEMP_INT_TD] __attribute__ ((aligned(16))); /* temporary interrupt td's */
+
+static unsigned long framelist[1024] __attribute__ ((aligned(0x1000))); /* frame list */
+
+static struct virt_root_hub rh; /* struct for root hub */
+
+/**********************************************************************
+ * some forward decleration
+ */
+int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len,
+ struct devrequest *setup);
+
+/* fill a td with the approproiate data. Link, status, info and buffer
+ * are used by the USB controller itselfes, dev is used to identify the
+ * "connected" device
+ */
+void usb_fill_td(uhci_td_t * td, unsigned long link, unsigned long status,
+ unsigned long info, unsigned long buffer, unsigned long dev)
+{
+ td->link = swap_32(link);
+ td->status = swap_32(status);
+ if ((info & UHCI_PID) == 0)
+ info |= USB_PID_OUT;
+ td->info = swap_32(info);
+ td->buffer = swap_32(buffer);
+ td->dev_ptr = dev;
+}
+
+/* fill a qh with the approproiate data. Head and element are used by the USB controller
+ * itselfes. As soon as a valid dev_ptr is filled, a td chain is connected to the qh.
+ * Please note, that after completion of the td chain, the entry element is removed /
+ * marked invalid by the USB controller.
+ */
+void usb_fill_qh(uhci_qh_t * qh, unsigned long head, unsigned long element)
+{
+ qh->head = swap_32(head);
+ qh->element = swap_32(element);
+ qh->dev_ptr = 0L;
+}
+
+/* get the status of a td->status
+ */
+unsigned long usb_uhci_td_stat(unsigned long status)
+{
+ unsigned long result = 0;
+ result |= (status & TD_CTRL_NAK) ? USB_ST_NAK_REC : 0;
+ result |= (status & TD_CTRL_STALLED) ? USB_ST_STALLED : 0;
+ result |= (status & TD_CTRL_DBUFERR) ? USB_ST_BUF_ERR : 0;
+ result |= (status & TD_CTRL_BABBLE) ? USB_ST_BABBLE_DET : 0;
+ result |= (status & TD_CTRL_CRCTIMEO) ? USB_ST_CRC_ERR : 0;
+ result |= (status & TD_CTRL_BITSTUFF) ? USB_ST_BIT_ERR : 0;
+ result |= (status & TD_CTRL_ACTIVE) ? USB_ST_NOT_PROC : 0;
+ return result;
+}
+
+/* get the status and the transfered len of a td chain.
+ * called from the completion handler
+ */
+int usb_get_td_status(uhci_td_t * td, struct usb_device *dev)
+{
+ unsigned long temp, info;
+ unsigned long stat;
+ uhci_td_t *mytd = td;
+
+ if (dev->devnum == rh.devnum)
+ return 0;
+ dev->act_len = 0;
+ stat = 0;
+ do {
+ temp = swap_32((unsigned long)READ32(&mytd->status));
+ stat = usb_uhci_td_stat(temp);
+ info = swap_32((unsigned long)READ32(&mytd->info));
+ if (((info & 0xff) != USB_PID_SETUP) && (((info >> 21) & 0x7ff) != 0x7ff) && (temp & 0x7FF) != 0x7ff) { /* if not setup and not null data pack */
+ dev->act_len += (temp & 0x7FF) + 1; /* the transfered len is act_len + 1 */
+ }
+ if (stat) { /* status no ok */
+ dev->status = stat;
+ return -1;
+ }
+ temp = swap_32((unsigned long)READ32(&mytd->link));
+ mytd = (uhci_td_t *) (temp & 0xfffffff0);
+ } while ((temp & 0x1) == 0); /* process all TDs */
+ dev->status = stat;
+ return 0; /* Ok */
+}
+
+/*-------------------------------------------------------------------
+ * LOW LEVEL STUFF
+ * assembles QHs und TDs for control, bulk and iso
+ *-------------------------------------------------------------------*/
+int dummy(void)
+{
+ USB_UHCI_PRINTF("DUMMY\n");
+ return 0;
+}
+
+/* Submits a control message. That is a Setup, Data and Status transfer.
+ * Routine does not wait for completion.
+ */
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup)
+{
+ unsigned long destination, status;
+ int maxsze = usb_maxpacket(dev, pipe);
+ unsigned long dataptr;
+ int len;
+ int pktsze;
+ int i = 0;
+
+ if (!maxsze) {
+ USB_UHCI_PRINTF
+ ("uhci_submit_control_urb: pipesize for pipe %lx is zero\n",
+ pipe);
+ return -1;
+ }
+ if (((pipe >> 8) & 0x7f) == rh.devnum) {
+ /* this is the root hub -> redirect it */
+ return uhci_submit_rh_msg(dev, pipe, buffer, transfer_len,
+ setup);
+ }
+ USB_UHCI_PRINTF("uhci_submit_control start len %x, maxsize %x\n",
+ transfer_len, maxsze);
+ /* The "pipe" thing contains the destination in bits 8--18 */
+ destination = (pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; /* Setup stage */
+ /* 3 errors */
+ status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27);
+ /* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD); */
+ /* Build the TD for the control request, try forever, 8 bytes of data */
+ usb_fill_td(&tmp_td[i], UHCI_PTR_TERM, status, destination | (7 << 21),
+ (unsigned long)setup, (unsigned long)dev);
+#ifdef DEBUG_EXTRA
+ {
+ char *sp = (char *)setup;
+ printf("SETUP to pipe %lx: %x %x %x %x %x %x %x %x\n", pipe,
+ sp[0], sp[1], sp[2], sp[3], sp[4], sp[5], sp[6], sp[7]);
+ }
+#endif
+ dataptr = (unsigned long)buffer;
+ len = transfer_len;
+
+ /* If direction is "send", change the frame from SETUP (0x2D)
+ to OUT (0xE1). Else change it from SETUP to IN (0x69). */
+ destination =
+ (pipe & PIPE_DEVEP_MASK) | ((pipe & USB_DIR_IN) ==
+ 0 ? USB_PID_OUT : USB_PID_IN);
+ while (len > 0) {
+ /* data stage */
+ pktsze = len;
+ i++;
+ if (pktsze > maxsze)
+ pktsze = maxsze;
+ destination ^= 1 << TD_TOKEN_TOGGLE; /* toggle DATA0/1 */
+ usb_fill_td(&tmp_td[i], UHCI_PTR_TERM, status, destination | ((pktsze - 1) << 21), dataptr, (unsigned long)dev); /* Status, pktsze bytes of data */
+ tmp_td[i - 1].link = swap_32((unsigned long)&tmp_td[i]);
+
+ dataptr += pktsze;
+ len -= pktsze;
+ }
+
+ /* Build the final TD for control status */
+ /* It's only IN if the pipe is out AND we aren't expecting data */
+
+ destination &= ~UHCI_PID;
+ if (((pipe & USB_DIR_IN) == 0) || (transfer_len == 0))
+ destination |= USB_PID_IN;
+ else
+ destination |= USB_PID_OUT;
+ destination |= 1 << TD_TOKEN_TOGGLE; /* End in Data1 */
+ i++;
+ status &= ~TD_CTRL_SPD;
+ /* no limit on errors on final packet , 0 bytes of data */
+ usb_fill_td(&tmp_td[i], UHCI_PTR_TERM, status | TD_CTRL_IOC,
+ destination | (UHCI_NULL_DATA_SIZE << 21), 0,
+ (unsigned long)dev);
+ tmp_td[i - 1].link = swap_32((unsigned long)&tmp_td[i]); /* queue status td */
+ /* usb_show_td(i+1); */
+ USB_UHCI_PRINTF("uhci_submit_control end (%d tmp_tds used)\n", i);
+ /* first mark the control QH element terminated */
+ qh_cntrl.element = 0xffffffffL;
+ /* set qh active */
+ qh_cntrl.dev_ptr = (unsigned long)dev;
+ /* fill in tmp_td_chain */
+ dummy();
+ qh_cntrl.element = swap_32((unsigned long)&tmp_td[0]);
+ return 0;
+}
+
+/*-------------------------------------------------------------------
+ * Prepare TDs for bulk transfers.
+ */
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len)
+{
+ unsigned long destination, status, info;
+ unsigned long dataptr;
+ int maxsze = usb_maxpacket(dev, pipe);
+ int len;
+ int i = 0;
+
+ if (transfer_len < 0) {
+ printf("Negative transfer length in submit_bulk\n");
+ return -1;
+ }
+ if (!maxsze)
+ return -1;
+ /* The "pipe" thing contains the destination in bits 8--18. */
+ destination = (pipe & PIPE_DEVEP_MASK) | usb_packetid(pipe);
+ /* 3 errors */
+ status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27);
+ /* ((urb->transfer_flags & USB_DISABLE_SPD) ? 0 : TD_CTRL_SPD) | (3 << 27); */
+ /* Build the TDs for the bulk request */
+ len = transfer_len;
+ dataptr = (unsigned long)buffer;
+ do {
+ int pktsze = len;
+ if (pktsze > maxsze)
+ pktsze = maxsze;
+ /* pktsze bytes of data */
+ info =
+ destination | (((pktsze - 1) & UHCI_NULL_DATA_SIZE) << 21) |
+ (usb_gettoggle
+ (dev, usb_pipeendpoint(pipe),
+ usb_pipeout(pipe)) << TD_TOKEN_TOGGLE);
+
+ if ((len - pktsze) == 0)
+ status |= TD_CTRL_IOC; /* last one generates INT */
+
+ usb_fill_td(&tmp_td[i], UHCI_PTR_TERM, status, info, dataptr, (unsigned long)dev); /* Status, pktsze bytes of data */
+ if (i > 0)
+ tmp_td[i - 1].link = swap_32((unsigned long)&tmp_td[i]);
+ i++;
+ dataptr += pktsze;
+ len -= pktsze;
+ usb_dotoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
+ } while (len > 0);
+ /* first mark the bulk QH element terminated */
+ qh_bulk.element = 0xffffffffL;
+ /* set qh active */
+ qh_bulk.dev_ptr = (unsigned long)dev;
+ /* fill in tmp_td_chain */
+ qh_bulk.element = swap_32((unsigned long)&tmp_td[0]);
+ return 0;
+}
+
+/* search a free interrupt td
+ */
+uhci_td_t *uhci_alloc_int_td(void)
+{
+ int i;
+ for (i = 0; i < USB_MAX_TEMP_INT_TD; i++) {
+ if (tmp_int_td[i].dev_ptr == 0) /* no device assigned -> free TD */
+ return &tmp_int_td[i];
+ }
+ return NULL;
+}
+
+/*-------------------------------------------------------------------
+ * submits USB interrupt (ie. polling ;-)
+ */
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, int interval)
+{
+ int nint, n;
+ unsigned long status, destination;
+ unsigned long info, tmp;
+ uhci_td_t *mytd;
+ if (interval < 0 || interval >= 256)
+ return -1;
+
+ if (interval == 0)
+ nint = 0;
+ else {
+ for (nint = 0, n = 1; nint <= 8; nint++, n += n) { /* round interval down to 2^n */
+ if (interval < n) {
+ interval = n / 2;
+ break;
+ }
+ }
+ nint--;
+ }
+
+ USB_UHCI_PRINTF("Rounded interval to %i, chain %i\n", interval, nint);
+ mytd = uhci_alloc_int_td();
+ if (mytd == NULL) {
+ printf("No free INT TDs found\n");
+ return -1;
+ }
+ status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | TD_CTRL_IOC | (3 << 27);
+/* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD) | (3 << 27);
+*/
+
+ destination =
+ (pipe & PIPE_DEVEP_MASK) | usb_packetid(pipe) |
+ (((transfer_len - 1) & 0x7ff) << 21);
+
+ info =
+ destination |
+ (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)) <<
+ TD_TOKEN_TOGGLE);
+ tmp = swap_32(td_int[nint].link);
+ usb_fill_td(mytd, tmp, status, info, (unsigned long)buffer,
+ (unsigned long)dev);
+ /* Link it */
+ tmp = swap_32((unsigned long)mytd);
+ td_int[nint].link = tmp;
+
+ usb_dotoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
+
+ return 0;
+}
+
+/**********************************************************************
+ * Low Level functions
+ */
+
+void reset_hc(void)
+{
+
+ /* Global reset for 100ms */
+ out16r(usb_base_addr + USBPORTSC1, 0x0204);
+ out16r(usb_base_addr + USBPORTSC2, 0x0204);
+ out16r(usb_base_addr + USBCMD, USBCMD_GRESET | USBCMD_RS);
+ /* Turn off all interrupts */
+ out16r(usb_base_addr + USBINTR, 0);
+ wait_ms(50);
+ out16r(usb_base_addr + USBCMD, 0);
+ wait_ms(10);
+}
+
+void start_hc(void)
+{
+ int timeout = 1000;
+
+ while (in16r(usb_base_addr + USBCMD) & USBCMD_HCRESET) {
+ if (!--timeout) {
+ printf("USBCMD_HCRESET timed out!\n");
+ break;
+ }
+ }
+ /* Turn on all interrupts */
+ out16r(usb_base_addr + USBINTR,
+ USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP);
+ /* Start at frame 0 */
+ out16r(usb_base_addr + USBFRNUM, 0);
+ /* set Framebuffer base address */
+ out32r(usb_base_addr + USBFLBASEADD, (unsigned long)&framelist);
+ /* Run and mark it configured with a 64-byte max packet */
+ out16r(usb_base_addr + USBCMD, USBCMD_RS | USBCMD_CF | USBCMD_MAXP);
+}
+
+/* Initialize the skeleton
+ */
+void usb_init_skel(void)
+{
+ unsigned long temp;
+ int n;
+
+ for (n = 0; n < USB_MAX_TEMP_INT_TD; n++)
+ tmp_int_td[n].dev_ptr = 0L; /* no devices connected */
+ /* last td */
+ usb_fill_td(&td_last, UHCI_PTR_TERM, TD_CTRL_IOC, USB_PID_OUT, 0, 0L);
+ /* usb_fill_td(&td_last,UHCI_PTR_TERM,0,0,0); */
+ /* End Queue Header */
+ usb_fill_qh(&qh_end, UHCI_PTR_TERM, (unsigned long)&td_last);
+ /* Bulk Queue Header */
+ temp = (unsigned long)&qh_end;
+ usb_fill_qh(&qh_bulk, temp | UHCI_PTR_QH, UHCI_PTR_TERM);
+ /* Control Queue Header */
+ temp = (unsigned long)&qh_bulk;
+ usb_fill_qh(&qh_cntrl, temp | UHCI_PTR_QH, UHCI_PTR_TERM);
+ /* 1ms Interrupt td */
+ temp = (unsigned long)&qh_cntrl;
+ usb_fill_td(&td_int[0], temp | UHCI_PTR_QH, 0, USB_PID_OUT, 0, 0L);
+ temp = (unsigned long)&td_int[0];
+ for (n = 1; n < 8; n++)
+ usb_fill_td(&td_int[n], temp, 0, USB_PID_OUT, 0, 0L);
+ for (n = 0; n < 1024; n++) {
+ /* link all framelist pointers to one of the interrupts */
+ int m, o;
+ if ((n & 127) == 127)
+ framelist[n] = swap_32((unsigned long)&td_int[0]);
+ else
+ for (o = 1, m = 2; m <= 128; o++, m += m)
+ if ((n & (m - 1)) == ((m - 1) / 2))
+ framelist[n] =
+ swap_32((unsigned long)&td_int[o]);
+
+ }
+}
+
+/* check the common skeleton for completed transfers, and update the status
+ * of the "connected" device. Called from the IRQ routine.
+ */
+void usb_check_skel(void)
+{
+ struct usb_device *dev;
+ /* start with the control qh */
+ if (qh_cntrl.dev_ptr != 0) { /* it's a device assigned check if this caused IRQ */
+ dev = (struct usb_device *)qh_cntrl.dev_ptr;
+ /* Flush cache now that hardware updated DATA and TDs/QHs */
+ if (!leon3_snooping_avail)
+ sparc_dcache_flush_all();
+ usb_get_td_status(&tmp_td[0], dev); /* update status */
+ if (!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */
+ qh_cntrl.dev_ptr = 0;
+ }
+ }
+ /* now process the bulk */
+ if (qh_bulk.dev_ptr != 0) { /* it's a device assigned check if this caused IRQ */
+ dev = (struct usb_device *)qh_bulk.dev_ptr;
+ /* Flush cache now that hardware updated DATA and TDs/QHs */
+ if (!leon3_snooping_avail)
+ sparc_dcache_flush_all();
+ usb_get_td_status(&tmp_td[0], dev); /* update status */
+ if (!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */
+ qh_bulk.dev_ptr = 0;
+ }
+ }
+}
+
+/* check the interrupt chain, ubdate the status of the appropriate device,
+ * call the appropriate irqhandler and reactivate the TD if the irqhandler
+ * returns with 1
+ */
+void usb_check_int_chain(void)
+{
+ int i, res;
+ unsigned long link, status;
+ struct usb_device *dev;
+ uhci_td_t *td, *prevtd;
+
+ for (i = 0; i < 8; i++) {
+ prevtd = &td_int[i]; /* the first previous td is the skeleton td */
+ link = swap_32(READ32(&td_int[i].link)) & 0xfffffff0; /* next in chain */
+ td = (uhci_td_t *) link; /* assign it */
+ /* all interrupt TDs are finally linked to the td_int[0].
+ * so we process all until we find the td_int[0].
+ * if int0 chain points to a QH, we're also done
+ */
+ while (((i > 0) && (link != (unsigned long)&td_int[0])) ||
+ ((i == 0)
+ && !(swap_32(READ32(&td->link)) & UHCI_PTR_QH))) {
+ /* check if a device is assigned with this td */
+ status = swap_32(READ32(&td->status));
+ if ((td->dev_ptr != 0L) && !(status & TD_CTRL_ACTIVE)) {
+ /* td is not active and a device is assigned -> call irqhandler */
+ dev = (struct usb_device *)td->dev_ptr;
+ dev->irq_act_len = ((status & 0x7FF) == 0x7FF) ? 0 : (status & 0x7FF) + 1; /* transfered length */
+ dev->irq_status = usb_uhci_td_stat(status); /* get status */
+ res = dev->irq_handle(dev); /* call irqhandler */
+ if (res == 1) {
+ /* reactivate */
+ status |= TD_CTRL_ACTIVE;
+ td->status = swap_32(status);
+ prevtd = td; /* previous td = this td */
+ } else {
+ prevtd->link = READ32(&td->link); /* link previous td directly to the nex td -> unlinked */
+ /* remove device pointer */
+ td->dev_ptr = 0L;
+ }
+ } /* if we call the irq handler */
+ link = swap_32(READ32(&td->link)) & 0xfffffff0; /* next in chain */
+ td = (uhci_td_t *) link; /* assign it */
+ } /* process all td in this int chain */
+ } /* next interrupt chain */
+}
+
+/* usb interrupt service routine.
+ */
+void handle_usb_interrupt(void)
+{
+ unsigned short status;
+ static int error = 0;
+
+ /*
+ * Read the interrupt status, and write it back to clear the
+ * interrupt cause
+ */
+
+ status = in16r(usb_base_addr + USBSTS);
+
+ if (!status) /* shared interrupt, not mine */
+ return;
+ if (status != 1) {
+ /* remove host controller halted state */
+ if ((status & (USBSTS_HCPE | USBSTS_HCH)) ==
+ (USBSTS_HCPE | USBSTS_HCH)) {
+ /* Stop due to bug in driver, or hardware */
+ out16r(usb_base_addr + USBSTS, status);
+ out16r(usb_base_addr + USBCMD,
+ USBCMD_HCRESET | USBCMD_GRESET);
+ printf
+ ("GRUSB: HW detected error(s) in USB Descriptors (STS: 0x%x)\n",
+ status);
+ usb_show_td(8);
+ return;
+ } else if ((status & 0x20)
+ && ((in16r(usb_base_addr + USBCMD) & USBCMD_RS) ==
+ 0)) {
+ if (error < 10) {
+ out16r(usb_base_addr + USBCMD,
+ USBCMD_RS | in16r(usb_base_addr +
+ USBCMD));
+ error++;
+ }
+ } else
+ error = 0;
+ }
+ usb_check_int_chain(); /* call interrupt handlers for int tds */
+ usb_check_skel(); /* call completion handler for common transfer routines */
+ out16r(usb_base_addr + USBSTS, status);
+}
+
+/* init uhci
+ */
+int usb_lowlevel_init(void)
+{
+ unsigned char temp;
+ ambapp_ahbdev ahbdev;
+
+ /* Find GRUSB core using AMBA Plug&Play information */
+ if (ambapp_ahbslv_first(VENDOR_GAISLER, GAISLER_UHCI, &ahbdev) != 1) {
+ printf("USB UHCI: Failed to find GRUSB controller\n");
+ return -1;
+ }
+ usb_base_addr = ahbdev.address[0];
+ grusb_irq = ahbdev.irq;
+ /*
+ usb_base_addr = 0xfffa0000;
+ grusb_irq = 10;
+ */
+#ifdef USB_UHCI_DEBUG
+ grusb_show_regs();
+#endif
+ memset(td_int, 0, sizeof(td_int));
+ memset(tmp_td, 0, sizeof(tmp_td));
+ memset(tmp_int_td, 0, sizeof(tmp_int_td));
+ memset(&qh_cntrl, 0, sizeof(qh_cntrl));
+ memset(&qh_end, 0, sizeof(qh_end));
+ memset(&td_last, 0, sizeof(td_last));
+
+ irq_free_handler(grusb_irq);
+ USB_UHCI_PRINTF("GRUSB: at 0x%lx irq %d\n", usb_base_addr, grusb_irq);
+ rh.devnum = 0;
+ usb_init_skel();
+ reset_hc();
+ start_hc();
+ irq_install_handler(grusb_irq,
+ (interrupt_handler_t *) handle_usb_interrupt, NULL);
+ return 0;
+}
+
+/* stop uhci
+ */
+int usb_lowlevel_stop(void)
+{
+ if (grusb_irq == -1)
+ return 1;
+ irq_free_handler(grusb_irq);
+ reset_hc();
+ grusb_irq = -1;
+ return 0;
+}
+
+/*******************************************************************************************
+ * Virtual Root Hub
+ * Since the uhci does not have a real HUB, we simulate one ;-)
+ */
+#undef USB_RH_DEBUG
+
+#ifdef USB_RH_DEBUG
+#define USB_RH_PRINTF(fmt,args...) printf (fmt ,##args)
+static void usb_display_wValue(unsigned short wValue, unsigned short wIndex);
+static void usb_display_Req(unsigned short req);
+#else
+#define USB_RH_PRINTF(fmt,args...)
+static void usb_display_wValue(unsigned short wValue, unsigned short wIndex)
+{
+}
+static void usb_display_Req(unsigned short req)
+{
+}
+#endif
+
+static unsigned char root_hub_dev_des[] = {
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x00, /* __u16 bcdUSB; v1.0 */
+ 0x01,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x01, /* __u8 iManufacturer; */
+ 0x00, /* __u8 iProduct; */
+ 0x00, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+/* Configuration descriptor */
+static unsigned char root_hub_config_des[] = {
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes;
+ Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x08, /* __u16 ep_wMaxPacketSize; 8 Bytes */
+ 0x00,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+static unsigned char root_hub_hub_des[] = {
+ 0x09, /* __u8 bLength; */
+ 0x29, /* __u8 bDescriptorType; Hub-descriptor */
+ 0x02, /* __u8 bNbrPorts; */
+ 0x00, /* __u16 wHubCharacteristics; */
+ 0x00,
+ 0x01, /* __u8 bPwrOn2pwrGood; 2ms */
+ 0x00, /* __u8 bHubContrCurrent; 0 mA */
+ 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */
+ 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */
+};
+
+static unsigned char root_hub_str_index0[] = {
+ 0x04, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 0x09, /* __u8 lang ID */
+ 0x04, /* __u8 lang ID */
+};
+
+static unsigned char root_hub_str_index1[] = {
+ 28, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 'U', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'C', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'I', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'R', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 't', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'u', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'b', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+};
+
+/*
+ * Root Hub Control Pipe (interrupt Pipes are not supported)
+ */
+
+int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *cmd)
+{
+ void *data = buffer;
+ int leni = transfer_len;
+ int len = 0;
+ int status = 0;
+ int stat = 0;
+ int i;
+
+ unsigned short cstatus;
+
+ unsigned short bmRType_bReq;
+ unsigned short wValue;
+ unsigned short wIndex;
+ unsigned short wLength;
+
+ if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+ printf("Root-Hub submit IRQ: NOT implemented\n");
+ return 0;
+ }
+ bmRType_bReq = cmd->requesttype | cmd->request << 8;
+ wValue = swap_16(cmd->value);
+ wIndex = swap_16(cmd->index);
+ wLength = swap_16(cmd->length);
+ usb_display_Req(bmRType_bReq);
+ for (i = 0; i < 8; i++)
+ rh.c_p_r[i] = 0;
+ USB_RH_PRINTF("Root-Hub: adr: %2x cmd(%1x): %02x%02x %04x %04x %04x\n",
+ dev->devnum, 8, cmd->requesttype, cmd->request, wValue,
+ wIndex, wLength);
+
+ switch (bmRType_bReq) {
+ /* Request Destination:
+ without flags: Device,
+ RH_INTERFACE: interface,
+ RH_ENDPOINT: endpoint,
+ RH_CLASS means HUB here,
+ RH_OTHER | RH_CLASS almost ever means HUB_PORT here
+ */
+
+ case RH_GET_STATUS:
+ *(unsigned short *)data = swap_16(1);
+ len = 2;
+ break;
+ case RH_GET_STATUS | RH_INTERFACE:
+ *(unsigned short *)data = swap_16(0);
+ len = 2;
+ break;
+ case RH_GET_STATUS | RH_ENDPOINT:
+ *(unsigned short *)data = swap_16(0);
+ len = 2;
+ break;
+ case RH_GET_STATUS | RH_CLASS:
+ *(unsigned long *)data = swap_32(0);
+ len = 4;
+ break; /* hub power ** */
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+
+ status = in16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1));
+ cstatus = ((status & USBPORTSC_CSC) >> (1 - 0)) |
+ ((status & USBPORTSC_PEC) >> (3 - 1)) |
+ (rh.c_p_r[wIndex - 1] << (0 + 4));
+ status = (status & USBPORTSC_CCS) | ((status & USBPORTSC_PE) >> (2 - 1)) | ((status & USBPORTSC_SUSP) >> (12 - 2)) | ((status & USBPORTSC_PR) >> (9 - 4)) | (1 << 8) | /* power on ** */
+ ((status & USBPORTSC_LSDA) << (-8 + 9));
+
+ *(unsigned short *)data = swap_16(status);
+ *(unsigned short *)(data + 2) = swap_16(cstatus);
+ len = 4;
+ break;
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ switch (wValue) {
+ case (RH_ENDPOINT_STALL):
+ len = 0;
+ break;
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ switch (wValue) {
+ case (RH_C_HUB_OVER_CURRENT):
+ len = 0; /* hub power over current ** */
+ break;
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ usb_display_wValue(wValue, wIndex);
+ switch (wValue) {
+ case (RH_PORT_ENABLE):
+ status =
+ in16r(usb_base_addr + USBPORTSC1 +
+ 2 * (wIndex - 1));
+ status = (status & 0xfff5) & ~USBPORTSC_PE;
+ out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
+ status);
+ len = 0;
+ break;
+ case (RH_PORT_SUSPEND):
+ status =
+ in16r(usb_base_addr + USBPORTSC1 +
+ 2 * (wIndex - 1));
+ status = (status & 0xfff5) & ~USBPORTSC_SUSP;
+ out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
+ status);
+ len = 0;
+ break;
+ case (RH_PORT_POWER):
+ len = 0; /* port power ** */
+ break;
+ case (RH_C_PORT_CONNECTION):
+ status =
+ in16r(usb_base_addr + USBPORTSC1 +
+ 2 * (wIndex - 1));
+ status = (status & 0xfff5) | USBPORTSC_CSC;
+ out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
+ status);
+ len = 0;
+ break;
+ case (RH_C_PORT_ENABLE):
+ status =
+ in16r(usb_base_addr + USBPORTSC1 +
+ 2 * (wIndex - 1));
+ status = (status & 0xfff5) | USBPORTSC_PEC;
+ out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
+ status);
+ len = 0;
+ break;
+ case (RH_C_PORT_SUSPEND):
+/*** WR_RH_PORTSTAT(RH_PS_PSSC); */
+ len = 0;
+ break;
+ case (RH_C_PORT_OVER_CURRENT):
+ len = 0;
+ break;
+ case (RH_C_PORT_RESET):
+ rh.c_p_r[wIndex - 1] = 0;
+ len = 0;
+ break;
+ }
+ break;
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ usb_display_wValue(wValue, wIndex);
+ switch (wValue) {
+ case (RH_PORT_SUSPEND):
+ status =
+ in16r(usb_base_addr + USBPORTSC1 +
+ 2 * (wIndex - 1));
+ status = (status & 0xfff5) | USBPORTSC_SUSP;
+ out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
+ status);
+ len = 0;
+ break;
+ case (RH_PORT_RESET):
+ status =
+ in16r(usb_base_addr + USBPORTSC1 +
+ 2 * (wIndex - 1));
+ status = (status & 0xfff5) | USBPORTSC_PR;
+ out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
+ status);
+ wait_ms(10);
+ status = (status & 0xfff5) & ~USBPORTSC_PR;
+ out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
+ status);
+ udelay(10);
+ status = (status & 0xfff5) | USBPORTSC_PE;
+ out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
+ status);
+ wait_ms(10);
+ status = (status & 0xfff5) | 0xa;
+ out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
+ status);
+ len = 0;
+ break;
+ case (RH_PORT_POWER):
+ len = 0; /* port power ** */
+ break;
+ case (RH_PORT_ENABLE):
+ status =
+ in16r(usb_base_addr + USBPORTSC1 +
+ 2 * (wIndex - 1));
+ status = (status & 0xfff5) | USBPORTSC_PE;
+ out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
+ status);
+ len = 0;
+ break;
+ }
+ break;
+
+ case RH_SET_ADDRESS:
+ rh.devnum = wValue;
+ len = 0;
+ break;
+ case RH_GET_DESCRIPTOR:
+ switch ((wValue & 0xff00) >> 8) {
+ case (0x01): /* device descriptor */
+ i = sizeof(root_hub_config_des);
+ status = i > wLength ? wLength : i;
+ len = leni > status ? status : leni;
+ memcpy(data, root_hub_dev_des, len);
+ break;
+ case (0x02): /* configuration descriptor */
+ i = sizeof(root_hub_config_des);
+ status = i > wLength ? wLength : i;
+ len = leni > status ? status : leni;
+ memcpy(data, root_hub_config_des, len);
+ break;
+ case (0x03): /*string descriptors */
+ if (wValue == 0x0300) {
+ i = sizeof(root_hub_str_index0);
+ status = i > wLength ? wLength : i;
+ len = leni > status ? status : leni;
+ memcpy(data, root_hub_str_index0, len);
+ break;
+ }
+ if (wValue == 0x0301) {
+ i = sizeof(root_hub_str_index1);
+ status = i > wLength ? wLength : i;
+ len = leni > status ? status : leni;
+ memcpy(data, root_hub_str_index1, len);
+ break;
+ }
+ stat = USB_ST_STALLED;
+ }
+ break;
+
+ case RH_GET_DESCRIPTOR | RH_CLASS:
+ root_hub_hub_des[2] = 2;
+ i = sizeof(root_hub_hub_des);
+ status = i > wLength ? wLength : i;
+ len = leni > status ? status : leni;
+ memcpy(data, root_hub_hub_des, len);
+ break;
+ case RH_GET_CONFIGURATION:
+ *(unsigned char *)data = 0x01;
+ len = 1;
+ break;
+ case RH_SET_CONFIGURATION:
+ len = 0;
+ break;
+ default:
+ stat = USB_ST_STALLED;
+ }
+ USB_RH_PRINTF("Root-Hub stat %lx port1: %x port2: %x\n\n", stat,
+ in16r(usb_base_addr + USBPORTSC1),
+ in16r(usb_base_addr + USBPORTSC2));
+ dev->act_len = len;
+ dev->status = stat;
+ return stat;
+
+}
+
+/********************************************************************************
+ * Some Debug Routines
+ */
+
+#ifdef USB_RH_DEBUG
+
+static void usb_display_Req(unsigned short req)
+{
+ USB_RH_PRINTF("- Root-Hub Request: ");
+ switch (req) {
+ case RH_GET_STATUS:
+ USB_RH_PRINTF("Get Status ");
+ break;
+ case RH_GET_STATUS | RH_INTERFACE:
+ USB_RH_PRINTF("Get Status Interface ");
+ break;
+ case RH_GET_STATUS | RH_ENDPOINT:
+ USB_RH_PRINTF("Get Status Endpoint ");
+ break;
+ case RH_GET_STATUS | RH_CLASS:
+ USB_RH_PRINTF("Get Status Class");
+ break; /* hub power ** */
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+ USB_RH_PRINTF("Get Status Class Others");
+ break;
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ USB_RH_PRINTF("Clear Feature Endpoint ");
+ break;
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ USB_RH_PRINTF("Clear Feature Class ");
+ break;
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ USB_RH_PRINTF("Clear Feature Other Class ");
+ break;
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ USB_RH_PRINTF("Set Feature Other Class ");
+ break;
+ case RH_SET_ADDRESS:
+ USB_RH_PRINTF("Set Address ");
+ break;
+ case RH_GET_DESCRIPTOR:
+ USB_RH_PRINTF("Get Descriptor ");
+ break;
+ case RH_GET_DESCRIPTOR | RH_CLASS:
+ USB_RH_PRINTF("Get Descriptor Class ");
+ break;
+ case RH_GET_CONFIGURATION:
+ USB_RH_PRINTF("Get Configuration ");
+ break;
+ case RH_SET_CONFIGURATION:
+ USB_RH_PRINTF("Get Configuration ");
+ break;
+ default:
+ USB_RH_PRINTF("****UNKNOWN**** 0x%04X ", req);
+ }
+ USB_RH_PRINTF("\n");
+
+}
+
+static void usb_display_wValue(unsigned short wValue, unsigned short wIndex)
+{
+ switch (wValue) {
+ case (RH_PORT_ENABLE):
+ USB_RH_PRINTF("Root-Hub: Enable Port %d\n", wIndex);
+ break;
+ case (RH_PORT_SUSPEND):
+ USB_RH_PRINTF("Root-Hub: Suspend Port %d\n", wIndex);
+ break;
+ case (RH_PORT_POWER):
+ USB_RH_PRINTF("Root-Hub: Port Power %d\n", wIndex);
+ break;
+ case (RH_C_PORT_CONNECTION):
+ USB_RH_PRINTF("Root-Hub: C Port Connection Port %d\n", wIndex);
+ break;
+ case (RH_C_PORT_ENABLE):
+ USB_RH_PRINTF("Root-Hub: C Port Enable Port %d\n", wIndex);
+ break;
+ case (RH_C_PORT_SUSPEND):
+ USB_RH_PRINTF("Root-Hub: C Port Suspend Port %d\n", wIndex);
+ break;
+ case (RH_C_PORT_OVER_CURRENT):
+ USB_RH_PRINTF("Root-Hub: C Port Over Current Port %d\n",
+ wIndex);
+ break;
+ case (RH_C_PORT_RESET):
+ USB_RH_PRINTF("Root-Hub: C Port reset Port %d\n", wIndex);
+ break;
+ default:
+ USB_RH_PRINTF("Root-Hub: unknown %x %x\n", wValue, wIndex);
+ break;
+ }
+}
+
+#endif
+
+/*#ifdef USB_UHCI_DEBUG*/
+
+static int usb_display_td(uhci_td_t * td)
+{
+ unsigned long tmp;
+ int valid;
+
+ printf("TD at %p:\n", td);
+
+ tmp = swap_32(READ32(&td->link));
+ printf("Link points to 0x%08lX, %s first, %s, %s\n", tmp & 0xfffffff0,
+ ((tmp & 0x4) == 0x4) ? "Depth" : "Breath",
+ ((tmp & 0x2) == 0x2) ? "QH" : "TD",
+ ((tmp & 0x1) == 0x1) ? "invalid" : "valid");
+ valid = ((tmp & 0x1) == 0x0);
+ tmp = swap_32(READ32(&td->status));
+ printf
+ (" %s %ld Errors %s %s %s \n %s %s %s %s %s %s\n Len 0x%lX\n",
+ (((tmp >> 29) & 0x1) == 0x1) ? "SPD Enable" : "SPD Disable",
+ ((tmp >> 28) & 0x3),
+ (((tmp >> 26) & 0x1) == 0x1) ? "Low Speed" : "Full Speed",
+ (((tmp >> 25) & 0x1) == 0x1) ? "ISO " : "",
+ (((tmp >> 24) & 0x1) == 0x1) ? "IOC " : "",
+ (((tmp >> 23) & 0x1) == 0x1) ? "Active " : "Inactive ",
+ (((tmp >> 22) & 0x1) == 0x1) ? "Stalled" : "",
+ (((tmp >> 21) & 0x1) == 0x1) ? "Data Buffer Error" : "",
+ (((tmp >> 20) & 0x1) == 0x1) ? "Babble" : "",
+ (((tmp >> 19) & 0x1) == 0x1) ? "NAK" : "",
+ (((tmp >> 18) & 0x1) == 0x1) ? "Bitstuff Error" : "",
+ (tmp & 0x7ff));
+ tmp = swap_32(READ32(&td->info));
+ printf(" MaxLen 0x%lX\n", ((tmp >> 21) & 0x7FF));
+ printf(" %sEndpoint 0x%lX Dev Addr 0x%lX PID 0x%lX\n",
+ ((tmp >> 19) & 0x1) == 0x1 ? "TOGGLE " : "", ((tmp >> 15) & 0xF),
+ ((tmp >> 8) & 0x7F), tmp & 0xFF);
+ tmp = swap_32(READ32(&td->buffer));
+ printf(" Buffer 0x%08lX\n", tmp);
+ printf(" DEV %08lX\n", td->dev_ptr);
+ return valid;
+}
+
+void usb_show_td(int max)
+{
+ int i;
+ if (max > 0) {
+ for (i = 0; i < max; i++) {
+ usb_display_td(&tmp_td[i]);
+ }
+ } else {
+ i = 0;
+ do {
+ printf("tmp_td[%d]\n", i);
+ } while (usb_display_td(&tmp_td[i++]));
+ }
+}
+
+void grusb_show_regs(void)
+{
+ unsigned int tmp;
+
+ tmp = in16r(usb_base_addr + USBCMD);
+ printf(" USBCMD: 0x%04x\n", tmp);
+ tmp = in16r(usb_base_addr + USBSTS);
+ printf(" USBSTS: 0x%04x\n", tmp);
+ tmp = in16r(usb_base_addr + USBINTR);
+ printf(" USBINTR: 0x%04x\n", tmp);
+ tmp = in16r(usb_base_addr + USBFRNUM);
+ printf(" FRNUM: 0x%04x\n", tmp);
+ tmp = in32r(usb_base_addr + USBFLBASEADD);
+ printf(" FLBASEADD: 0x%08x\n", tmp);
+ tmp = in16r(usb_base_addr + USBSOF);
+ printf(" SOFMOD: 0x%04x\n", tmp);
+ tmp = in16r(usb_base_addr + USBPORTSC1);
+ printf(" PORTSC1: 0x%04x\n", tmp);
+}
+
+/*#endif*/
+#endif /* CONFIG_USB_UHCI */
+
+/* EOF */
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Note: Part of this code has been derived from linux
+ *
+ */
+#ifndef _USB_UHCI_H_
+#define _USB_UHCI_H_
+
+/* Command register */
+#define USBCMD 0
+#define USBCMD_RS 0x0001 /* Run/Stop */
+#define USBCMD_HCRESET 0x0002 /* Host reset */
+#define USBCMD_GRESET 0x0004 /* Global reset */
+#define USBCMD_EGSM 0x0008 /* Global Suspend Mode */
+#define USBCMD_FGR 0x0010 /* Force Global Resume */
+#define USBCMD_SWDBG 0x0020 /* SW Debug mode */
+#define USBCMD_CF 0x0040 /* Config Flag (sw only) */
+#define USBCMD_MAXP 0x0080 /* Max Packet (0 = 32, 1 = 64) */
+
+/* Status register */
+#define USBSTS 2
+#define USBSTS_USBINT 0x0001 /* Interrupt due to IOC */
+#define USBSTS_ERROR 0x0002 /* Interrupt due to error */
+#define USBSTS_RD 0x0004 /* Resume Detect */
+#define USBSTS_HSE 0x0008 /* Host System Error - basically PCI problems */
+#define USBSTS_HCPE 0x0010 /* Host Controller Process Error - the scripts were buggy */
+#define USBSTS_HCH 0x0020 /* HC Halted */
+
+/* Interrupt enable register */
+#define USBINTR 4
+#define USBINTR_TIMEOUT 0x0001 /* Timeout/CRC error enable */
+#define USBINTR_RESUME 0x0002 /* Resume interrupt enable */
+#define USBINTR_IOC 0x0004 /* Interrupt On Complete enable */
+#define USBINTR_SP 0x0008 /* Short packet interrupt enable */
+
+#define USBFRNUM 6
+#define USBFLBASEADD 8
+#define USBSOF 12
+
+/* USB port status and control registers */
+#define USBPORTSC1 16
+#define USBPORTSC2 18
+#define USBPORTSC_CCS 0x0001 /* Current Connect Status ("device present") */
+#define USBPORTSC_CSC 0x0002 /* Connect Status Change */
+#define USBPORTSC_PE 0x0004 /* Port Enable */
+#define USBPORTSC_PEC 0x0008 /* Port Enable Change */
+#define USBPORTSC_LS 0x0030 /* Line Status */
+#define USBPORTSC_RD 0x0040 /* Resume Detect */
+#define USBPORTSC_LSDA 0x0100 /* Low Speed Device Attached */
+#define USBPORTSC_PR 0x0200 /* Port Reset */
+#define USBPORTSC_SUSP 0x1000 /* Suspend */
+
+/* Legacy support register */
+#define USBLEGSUP 0xc0
+#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
+
+#define UHCI_NULL_DATA_SIZE 0x7ff /* for UHCI controller TD */
+#define UHCI_PID 0xff /* PID MASK */
+
+#define UHCI_PTR_BITS 0x000F
+#define UHCI_PTR_TERM 0x0001
+#define UHCI_PTR_QH 0x0002
+#define UHCI_PTR_DEPTH 0x0004
+
+/* for TD <status>: */
+#define TD_CTRL_SPD (1 << 29) /* Short Packet Detect */
+#define TD_CTRL_C_ERR_MASK (3 << 27) /* Error Counter bits */
+#define TD_CTRL_LS (1 << 26) /* Low Speed Device */
+#define TD_CTRL_IOS (1 << 25) /* Isochronous Select */
+#define TD_CTRL_IOC (1 << 24) /* Interrupt on Complete */
+#define TD_CTRL_ACTIVE (1 << 23) /* TD Active */
+#define TD_CTRL_STALLED (1 << 22) /* TD Stalled */
+#define TD_CTRL_DBUFERR (1 << 21) /* Data Buffer Error */
+#define TD_CTRL_BABBLE (1 << 20) /* Babble Detected */
+#define TD_CTRL_NAK (1 << 19) /* NAK Received */
+#define TD_CTRL_CRCTIMEO (1 << 18) /* CRC/Time Out Error */
+#define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */
+#define TD_CTRL_ACTLEN_MASK 0x7ff /* actual length, encoded as n - 1 */
+
+#define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \
+ TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF)
+
+#define TD_TOKEN_TOGGLE 19
+
+/* ------------------------------------------------------------------------------------
+ Virtual Root HUB
+ ------------------------------------------------------------------------------------ */
+/* destination of request */
+#define RH_INTERFACE 0x01
+#define RH_ENDPOINT 0x02
+#define RH_OTHER 0x03
+
+#define RH_CLASS 0x20
+#define RH_VENDOR 0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
+#define RH_SET_ADDRESS 0x0500
+#define RH_GET_DESCRIPTOR 0x0680
+#define RH_SET_DESCRIPTOR 0x0700
+#define RH_GET_CONFIGURATION 0x0880
+#define RH_SET_CONFIGURATION 0x0900
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP 0x2000
+
+/* Hub port features */
+#define RH_PORT_CONNECTION 0x00
+#define RH_PORT_ENABLE 0x01
+#define RH_PORT_SUSPEND 0x02
+#define RH_PORT_OVER_CURRENT 0x03
+#define RH_PORT_RESET 0x04
+#define RH_PORT_POWER 0x08
+#define RH_PORT_LOW_SPEED 0x09
+#define RH_C_PORT_CONNECTION 0x10
+#define RH_C_PORT_ENABLE 0x11
+#define RH_C_PORT_SUSPEND 0x12
+#define RH_C_PORT_OVER_CURRENT 0x13
+#define RH_C_PORT_RESET 0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER 0x00
+#define RH_C_HUB_OVER_CURRENT 0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL 0x01
+
+/* Our Vendor Specific feature */
+#define RH_REMOVE_EP 0x00
+
+#define RH_ACK 0x01
+#define RH_REQ_ERR -1
+#define RH_NACK 0x00
+
+/* Transfer descriptor structure */
+typedef struct {
+ unsigned long link; /* next td/qh (LE) */
+ unsigned long status; /* status of the td */
+ unsigned long info; /* Max Lenght / Endpoint / device address and PID */
+ unsigned long buffer; /* pointer to data buffer (LE) */
+ unsigned long dev_ptr; /* pointer to the assigned device (BE) */
+ unsigned long res[3]; /* reserved (TDs must be 8Byte aligned) */
+} uhci_td_t, *puhci_td_t;
+
+/* Queue Header structure */
+typedef struct {
+ unsigned long head; /* Next QH (LE) */
+ unsigned long element; /* Queue element pointer (LE) */
+ unsigned long res[5]; /* reserved */
+ unsigned long dev_ptr; /* if 0 no tds have been assigned to this qh */
+} uhci_qh_t, *puhci_qh_t;
+
+struct virt_root_hub {
+ int devnum; /* Address of Root Hub endpoint */
+ int numports; /* number of ports */
+ int c_p_r[8]; /* C_PORT_RESET */
+};
+
+#endif /* _USB_UHCI_H_ */
uint l2srbar;
svr = get_svr();
- ver = SVR_VER(svr);
+ ver = SVR_SOC_VER(svr);
asm("msync;isync");
cache_ctl = l2cache->l2ctl;
while (timeout) {
int i;
for (i = 1; i < CONFIG_NR_CPUS; i++) {
- if (table[i * NUM_BOOT_ENTRY])
+ if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER])
cpu_up_mask |= (1 << i);
};
timeout--;
}
+ if (timeout == 0)
+ printf("CPU up timeout. CPU up mask is %x should be %x\n",
+ cpu_up_mask, up);
+
/* enable time base at the platform */
if (whoami)
devdisr |= MPC85xx_DEVDISR_TB1;
* Adjust DDR II IO voltage biasing.
* Only 8548 rev 1 needs the fix
*/
- if ((SVR_VER(get_svr()) == SVR_8548_E) &&
+ if ((SVR_SOC_VER(get_svr()) == SVR_8548_E) &&
(SVR_MJREV(get_svr()) == 1) &&
(spd.mem_type == SPD_MEMTYPE_DDR2)) {
volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
COBJS-y += tsi108_eth.o
COBJS-y += uli526x.o
COBJS-y += vsc7385.o
+COBJS-$(CONFIG_XILINX_EMAC) += xilinx_emac.o
+COBJS-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
--- /dev/null
+/******************************************************************************
+ *
+ * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
+ * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
+ * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE.
+ *
+ * (C) Copyright 2007-2008 Michal Simek
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * (c) Copyright 2003 Xilinx Inc.
+ * All rights reserved.
+ *
+ ******************************************************************************/
+
+#include <config.h>
+#include <common.h>
+#include <net.h>
+#include <asm/io.h>
+
+#include <asm/asm.h>
+
+#undef DEBUG
+
+typedef struct {
+ u32 regbaseaddress; /* Base address of registers */
+ u32 databaseaddress; /* Base address of data for FIFOs */
+} xpacketfifov100b;
+
+typedef struct {
+ u32 baseaddress; /* Base address (of IPIF) */
+ u32 isstarted; /* Device is currently started 0-no, 1-yes */
+ xpacketfifov100b recvfifo; /* FIFO used to receive frames */
+ xpacketfifov100b sendfifo; /* FIFO used to send frames */
+} xemac;
+
+#define XIIF_V123B_IISR_OFFSET 32UL /* IP interrupt status register */
+#define XIIF_V123B_RESET_MASK 0xAUL
+#define XIIF_V123B_RESETR_OFFSET 64UL /* reset register */
+
+/* This constant is used with the Reset Register */
+#define XPF_RESET_FIFO_MASK 0x0000000A
+#define XPF_COUNT_STATUS_REG_OFFSET 4UL
+
+/* These constants are used with the Occupancy/Vacancy Count Register. This
+ * register also contains FIFO status */
+#define XPF_COUNT_MASK 0x0000FFFF
+#define XPF_DEADLOCK_MASK 0x20000000
+
+/* Offset of the MAC registers from the IPIF base address */
+#define XEM_REG_OFFSET 0x1100UL
+
+/*
+ * Register offsets for the Ethernet MAC. Each register is 32 bits.
+ */
+#define XEM_ECR_OFFSET (XEM_REG_OFFSET + 0x4) /* MAC Control */
+#define XEM_SAH_OFFSET (XEM_REG_OFFSET + 0xC) /* Station addr, high */
+#define XEM_SAL_OFFSET (XEM_REG_OFFSET + 0x10) /* Station addr, low */
+#define XEM_RPLR_OFFSET (XEM_REG_OFFSET + 0x1C) /* Rx packet length */
+#define XEM_TPLR_OFFSET (XEM_REG_OFFSET + 0x20) /* Tx packet length */
+#define XEM_TSR_OFFSET (XEM_REG_OFFSET + 0x24) /* Tx status */
+
+#define XEM_PFIFO_OFFSET 0x2000UL
+/* Tx registers */
+#define XEM_PFIFO_TXREG_OFFSET (XEM_PFIFO_OFFSET + 0x0)
+/* Rx registers */
+#define XEM_PFIFO_RXREG_OFFSET (XEM_PFIFO_OFFSET + 0x10)
+/* Tx keyhole */
+#define XEM_PFIFO_TXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x100)
+/* Rx keyhole */
+#define XEM_PFIFO_RXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x200)
+
+/*
+ * EMAC Interrupt Registers (Status and Enable) masks. These registers are
+ * part of the IPIF IP Interrupt registers
+ */
+/* A mask for all transmit interrupts, used in polled mode */
+#define XEM_EIR_XMIT_ALL_MASK (XEM_EIR_XMIT_DONE_MASK |\
+ XEM_EIR_XMIT_ERROR_MASK | \
+ XEM_EIR_XMIT_SFIFO_EMPTY_MASK |\
+ XEM_EIR_XMIT_LFIFO_FULL_MASK)
+
+/* Xmit complete */
+#define XEM_EIR_XMIT_DONE_MASK 0x00000001UL
+/* Recv complete */
+#define XEM_EIR_RECV_DONE_MASK 0x00000002UL
+/* Xmit error */
+#define XEM_EIR_XMIT_ERROR_MASK 0x00000004UL
+/* Recv error */
+#define XEM_EIR_RECV_ERROR_MASK 0x00000008UL
+/* Xmit status fifo empty */
+#define XEM_EIR_XMIT_SFIFO_EMPTY_MASK 0x00000010UL
+/* Recv length fifo empty */
+#define XEM_EIR_RECV_LFIFO_EMPTY_MASK 0x00000020UL
+/* Xmit length fifo full */
+#define XEM_EIR_XMIT_LFIFO_FULL_MASK 0x00000040UL
+/* Recv length fifo overrun */
+#define XEM_EIR_RECV_LFIFO_OVER_MASK 0x00000080UL
+/* Recv length fifo underrun */
+#define XEM_EIR_RECV_LFIFO_UNDER_MASK 0x00000100UL
+/* Xmit status fifo overrun */
+#define XEM_EIR_XMIT_SFIFO_OVER_MASK 0x00000200UL
+/* Transmit status fifo underrun */
+#define XEM_EIR_XMIT_SFIFO_UNDER_MASK 0x00000400UL
+/* Transmit length fifo overrun */
+#define XEM_EIR_XMIT_LFIFO_OVER_MASK 0x00000800UL
+/* Transmit length fifo underrun */
+#define XEM_EIR_XMIT_LFIFO_UNDER_MASK 0x00001000UL
+/* Transmit pause pkt received */
+#define XEM_EIR_XMIT_PAUSE_MASK 0x00002000UL
+
+/*
+ * EMAC Control Register (ECR)
+ */
+/* Full duplex mode */
+#define XEM_ECR_FULL_DUPLEX_MASK 0x80000000UL
+/* Reset transmitter */
+#define XEM_ECR_XMIT_RESET_MASK 0x40000000UL
+/* Enable transmitter */
+#define XEM_ECR_XMIT_ENABLE_MASK 0x20000000UL
+/* Reset receiver */
+#define XEM_ECR_RECV_RESET_MASK 0x10000000UL
+/* Enable receiver */
+#define XEM_ECR_RECV_ENABLE_MASK 0x08000000UL
+/* Enable PHY */
+#define XEM_ECR_PHY_ENABLE_MASK 0x04000000UL
+/* Enable xmit pad insert */
+#define XEM_ECR_XMIT_PAD_ENABLE_MASK 0x02000000UL
+/* Enable xmit FCS insert */
+#define XEM_ECR_XMIT_FCS_ENABLE_MASK 0x01000000UL
+/* Enable unicast addr */
+#define XEM_ECR_UNICAST_ENABLE_MASK 0x00020000UL
+/* Enable broadcast addr */
+#define XEM_ECR_BROAD_ENABLE_MASK 0x00008000UL
+
+/*
+ * Transmit Status Register (TSR)
+ */
+/* Transmit excess deferral */
+#define XEM_TSR_EXCESS_DEFERRAL_MASK 0x80000000UL
+/* Transmit late collision */
+#define XEM_TSR_LATE_COLLISION_MASK 0x01000000UL
+
+#define ENET_MAX_MTU PKTSIZE
+#define ENET_ADDR_LENGTH 6
+
+static unsigned int etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
+
+static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
+
+static xemac emac;
+
+void eth_halt(void)
+{
+ debug ("eth_halt\n");
+}
+
+int eth_init(bd_t * bis)
+{
+ u32 helpreg;
+ debug ("EMAC Initialization Started\n\r");
+
+ if (emac.isstarted) {
+ puts("Emac is started\n");
+ return 0;
+ }
+
+ memset (&emac, 0, sizeof (xemac));
+
+ emac.baseaddress = XILINX_EMAC_BASEADDR;
+
+ /* Setting up FIFOs */
+ emac.recvfifo.regbaseaddress = emac.baseaddress +
+ XEM_PFIFO_RXREG_OFFSET;
+ emac.recvfifo.databaseaddress = emac.baseaddress +
+ XEM_PFIFO_RXDATA_OFFSET;
+ out_be32 (emac.recvfifo.regbaseaddress, XPF_RESET_FIFO_MASK);
+
+ emac.sendfifo.regbaseaddress = emac.baseaddress +
+ XEM_PFIFO_TXREG_OFFSET;
+ emac.sendfifo.databaseaddress = emac.baseaddress +
+ XEM_PFIFO_TXDATA_OFFSET;
+ out_be32 (emac.sendfifo.regbaseaddress, XPF_RESET_FIFO_MASK);
+
+ /* Reset the entire IPIF */
+ out_be32 (emac.baseaddress + XIIF_V123B_RESETR_OFFSET,
+ XIIF_V123B_RESET_MASK);
+
+ /* Stopping EMAC for setting up MAC */
+ helpreg = in_be32 (emac.baseaddress + XEM_ECR_OFFSET);
+ helpreg &= ~(XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK);
+ out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg);
+
+ if (!getenv("ethaddr")) {
+ memcpy(bis->bi_enetaddr, emacaddr, ENET_ADDR_LENGTH);
+ }
+
+ /* Set the device station address high and low registers */
+ helpreg = (bis->bi_enetaddr[0] << 8) | bis->bi_enetaddr[1];
+ out_be32 (emac.baseaddress + XEM_SAH_OFFSET, helpreg);
+ helpreg = (bis->bi_enetaddr[2] << 24) | (bis->bi_enetaddr[3] << 16) |
+ (bis->bi_enetaddr[4] << 8) | bis->bi_enetaddr[5];
+ out_be32 (emac.baseaddress + XEM_SAL_OFFSET, helpreg);
+
+ helpreg = XEM_ECR_UNICAST_ENABLE_MASK | XEM_ECR_BROAD_ENABLE_MASK |
+ XEM_ECR_FULL_DUPLEX_MASK | XEM_ECR_XMIT_FCS_ENABLE_MASK |
+ XEM_ECR_XMIT_PAD_ENABLE_MASK | XEM_ECR_PHY_ENABLE_MASK;
+ out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg);
+
+ emac.isstarted = 1;
+
+ /* Enable the transmitter, and receiver */
+ helpreg = in_be32 (emac.baseaddress + XEM_ECR_OFFSET);
+ helpreg &= ~(XEM_ECR_XMIT_RESET_MASK | XEM_ECR_RECV_RESET_MASK);
+ helpreg |= (XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK);
+ out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg);
+
+ printf("EMAC Initialization complete\n\r");
+ return 0;
+}
+
+int eth_send(volatile void *ptr, int len)
+{
+ u32 intrstatus;
+ u32 xmitstatus;
+ u32 fifocount;
+ u32 wordcount;
+ u32 extrabytecount;
+ u32 *wordbuffer = (u32 *) ptr;
+
+ if (len > ENET_MAX_MTU)
+ len = ENET_MAX_MTU;
+
+ /*
+ * Check for overruns and underruns for the transmit status and length
+ * FIFOs and make sure the send packet FIFO is not deadlocked.
+ * Any of these conditions is bad enough that we do not want to
+ * continue. The upper layer software should reset the device to resolve
+ * the error.
+ */
+ intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET);
+ if (intrstatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
+ XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
+ debug ("Transmitting overrun error\n");
+ return 0;
+ } else if (intrstatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
+ XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
+ debug ("Transmitting underrun error\n");
+ return 0;
+ } else if (in_be32 (emac.sendfifo.regbaseaddress +
+ XPF_COUNT_STATUS_REG_OFFSET) & XPF_DEADLOCK_MASK) {
+ debug ("Transmitting fifo error\n");
+ return 0;
+ }
+
+ /*
+ * Before writing to the data FIFO, make sure the length FIFO is not
+ * full. The data FIFO might not be full yet even though the length FIFO
+ * is. This avoids an overrun condition on the length FIFO and keeps the
+ * FIFOs in sync.
+ *
+ * Clear the latched LFIFO_FULL bit so next time around the most
+ * current status is represented
+ */
+ if (intrstatus & XEM_EIR_XMIT_LFIFO_FULL_MASK) {
+ out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET,
+ intrstatus & XEM_EIR_XMIT_LFIFO_FULL_MASK);
+ debug ("Fifo is full\n");
+ return 0;
+ }
+
+ /* get the count of how many words may be inserted into the FIFO */
+ fifocount = in_be32 (emac.sendfifo.regbaseaddress +
+ XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK;
+ wordcount = len >> 2;
+ extrabytecount = len & 0x3;
+
+ if (fifocount < wordcount) {
+ debug ("Sending packet is larger then size of FIFO\n");
+ return 0;
+ }
+
+ for (fifocount = 0; fifocount < wordcount; fifocount++) {
+ out_be32 (emac.sendfifo.databaseaddress, wordbuffer[fifocount]);
+ }
+ if (extrabytecount > 0) {
+ u32 lastword = 0;
+ u8 *extrabytesbuffer = (u8 *) (wordbuffer + wordcount);
+
+ if (extrabytecount == 1) {
+ lastword = extrabytesbuffer[0] << 24;
+ } else if (extrabytecount == 2) {
+ lastword = extrabytesbuffer[0] << 24 |
+ extrabytesbuffer[1] << 16;
+ } else if (extrabytecount == 3) {
+ lastword = extrabytesbuffer[0] << 24 |
+ extrabytesbuffer[1] << 16 |
+ extrabytesbuffer[2] << 8;
+ }
+ out_be32 (emac.sendfifo.databaseaddress, lastword);
+ }
+
+ /* Loop on the MAC's status to wait for any pause to complete */
+ intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET);
+ while ((intrstatus & XEM_EIR_XMIT_PAUSE_MASK) != 0) {
+ intrstatus = in_be32 ((emac.baseaddress) +
+ XIIF_V123B_IISR_OFFSET);
+ /* Clear the pause status from the transmit status register */
+ out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET,
+ intrstatus & XEM_EIR_XMIT_PAUSE_MASK);
+ }
+
+ /*
+ * Set the MAC's transmit packet length register to tell it to transmit
+ */
+ out_be32 (emac.baseaddress + XEM_TPLR_OFFSET, len);
+
+ /*
+ * Loop on the MAC's status to wait for the transmit to complete.
+ * The transmit status is in the FIFO when the XMIT_DONE bit is set.
+ */
+ do {
+ intrstatus = in_be32 ((emac.baseaddress) +
+ XIIF_V123B_IISR_OFFSET);
+ }
+ while ((intrstatus & XEM_EIR_XMIT_DONE_MASK) == 0);
+
+ xmitstatus = in_be32 (emac.baseaddress + XEM_TSR_OFFSET);
+
+ if (intrstatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
+ XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
+ debug ("Transmitting overrun error\n");
+ return 0;
+ } else if (intrstatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
+ XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
+ debug ("Transmitting underrun error\n");
+ return 0;
+ }
+
+ /* Clear the interrupt status register of transmit statuses */
+ out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET,
+ intrstatus & XEM_EIR_XMIT_ALL_MASK);
+
+ /*
+ * Collision errors are stored in the transmit status register
+ * instead of the interrupt status register
+ */
+ if ((xmitstatus & XEM_TSR_EXCESS_DEFERRAL_MASK) ||
+ (xmitstatus & XEM_TSR_LATE_COLLISION_MASK)) {
+ debug ("Transmitting collision error\n");
+ return 0;
+ }
+ return 1;
+}
+
+int eth_rx(void)
+{
+ u32 pktlength;
+ u32 intrstatus;
+ u32 fifocount;
+ u32 wordcount;
+ u32 extrabytecount;
+ u32 lastword;
+ u8 *extrabytesbuffer;
+
+ if (in_be32 (emac.recvfifo.regbaseaddress + XPF_COUNT_STATUS_REG_OFFSET)
+ & XPF_DEADLOCK_MASK) {
+ out_be32 (emac.recvfifo.regbaseaddress, XPF_RESET_FIFO_MASK);
+ debug ("Receiving FIFO deadlock\n");
+ return 0;
+ }
+
+ /*
+ * Get the interrupt status to know what happened (whether an error
+ * occurred and/or whether frames have been received successfully).
+ * When clearing the intr status register, clear only statuses that
+ * pertain to receive.
+ */
+ intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET);
+ /*
+ * Before reading from the length FIFO, make sure the length FIFO is not
+ * empty. We could cause an underrun error if we try to read from an
+ * empty FIFO.
+ */
+ if (!(intrstatus & XEM_EIR_RECV_DONE_MASK)) {
+ /* debug ("Receiving FIFO is empty\n"); */
+ return 0;
+ }
+
+ /*
+ * Determine, from the MAC, the length of the next packet available
+ * in the data FIFO (there should be a non-zero length here)
+ */
+ pktlength = in_be32 (emac.baseaddress + XEM_RPLR_OFFSET);
+ if (!pktlength) {
+ return 0;
+ }
+
+ /*
+ * Write the RECV_DONE bit in the status register to clear it. This bit
+ * indicates the RPLR is non-empty, and we know it's set at this point.
+ * We clear it so that subsequent entry into this routine will reflect
+ * the current status. This is done because the non-empty bit is latched
+ * in the IPIF, which means it may indicate a non-empty condition even
+ * though there is something in the FIFO.
+ */
+ out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET,
+ XEM_EIR_RECV_DONE_MASK);
+
+ fifocount = in_be32 (emac.recvfifo.regbaseaddress +
+ XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK;
+
+ if ((fifocount * 4) < pktlength) {
+ debug ("Receiving FIFO is smaller than packet size.\n");
+ return 0;
+ }
+
+ wordcount = pktlength >> 2;
+ extrabytecount = pktlength & 0x3;
+
+ for (fifocount = 0; fifocount < wordcount; fifocount++) {
+ etherrxbuff[fifocount] =
+ in_be32 (emac.recvfifo.databaseaddress);
+ }
+
+ /*
+ * if there are extra bytes to handle, read the last word from the FIFO
+ * and insert the extra bytes into the buffer
+ */
+ if (extrabytecount > 0) {
+ extrabytesbuffer = (u8 *) (etherrxbuff + wordcount);
+
+ lastword = in_be32 (emac.recvfifo.databaseaddress);
+
+ /*
+ * one extra byte in the last word, put the byte into the next
+ * location of the buffer, bytes in a word of the FIFO are
+ * ordered from most significant byte to least
+ */
+ if (extrabytecount == 1) {
+ extrabytesbuffer[0] = (u8) (lastword >> 24);
+ } else if (extrabytecount == 2) {
+ extrabytesbuffer[0] = (u8) (lastword >> 24);
+ extrabytesbuffer[1] = (u8) (lastword >> 16);
+ } else if (extrabytecount == 3) {
+ extrabytesbuffer[0] = (u8) (lastword >> 24);
+ extrabytesbuffer[1] = (u8) (lastword >> 16);
+ extrabytesbuffer[2] = (u8) (lastword >> 8);
+ }
+ }
+ NetReceive((uchar *)etherrxbuff, pktlength);
+ return 1;
+}
--- /dev/null
+/******************************************************************************
+ *
+ * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
+ * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
+ * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE.
+ *
+ * (C) Copyright 2007-2008 Michal Simek
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * (c) Copyright 2003 Xilinx Inc.
+ * All rights reserved.
+ *
+ ******************************************************************************/
+
+#include <common.h>
+#include <net.h>
+#include <config.h>
+#include <asm/io.h>
+
+#undef DEBUG
+
+#define ENET_MAX_MTU PKTSIZE
+#define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN
+#define ENET_ADDR_LENGTH 6
+
+/* EmacLite constants */
+#define XEL_BUFFER_OFFSET 0x0800 /* Next buffer's offset */
+#define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */
+#define XEL_TSR_OFFSET 0x07FC /* Tx status */
+#define XEL_RSR_OFFSET 0x17FC /* Rx status */
+#define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */
+
+/* Xmit complete */
+#define XEL_TSR_XMIT_BUSY_MASK 0x00000001UL
+/* Xmit interrupt enable bit */
+#define XEL_TSR_XMIT_IE_MASK 0x00000008UL
+/* Buffer is active, SW bit only */
+#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000UL
+/* Program the MAC address */
+#define XEL_TSR_PROGRAM_MASK 0x00000002UL
+/* define for programming the MAC address into the EMAC Lite */
+#define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
+
+/* Transmit packet length upper byte */
+#define XEL_TPLR_LENGTH_MASK_HI 0x0000FF00UL
+/* Transmit packet length lower byte */
+#define XEL_TPLR_LENGTH_MASK_LO 0x000000FFUL
+
+/* Recv complete */
+#define XEL_RSR_RECV_DONE_MASK 0x00000001UL
+/* Recv interrupt enable bit */
+#define XEL_RSR_RECV_IE_MASK 0x00000008UL
+
+typedef struct {
+ unsigned int baseaddress; /* Base address for device (IPIF) */
+ unsigned int nexttxbuffertouse; /* Next TX buffer to write to */
+ unsigned int nextrxbuffertouse; /* Next RX buffer to read from */
+ unsigned char deviceid; /* Unique ID of device - for future */
+} xemaclite;
+
+static xemaclite emaclite;
+
+static char etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
+
+/* hardcoded MAC address for the Xilinx EMAC Core when env is nowhere*/
+#ifdef CFG_ENV_IS_NOWHERE
+static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
+#else
+static u8 emacaddr[ENET_ADDR_LENGTH];
+#endif
+
+void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount)
+{
+ unsigned int i;
+ u32 alignbuffer;
+ u32 *to32ptr;
+ u32 *from32ptr;
+ u8 *to8ptr;
+ u8 *from8ptr;
+
+ from32ptr = (u32 *) srcptr;
+
+ /* Word aligned buffer, no correction needed. */
+ to32ptr = (u32 *) destptr;
+ while (bytecount > 3) {
+ *to32ptr++ = *from32ptr++;
+ bytecount -= 4;
+ }
+ to8ptr = (u8 *) to32ptr;
+
+ alignbuffer = *from32ptr++;
+ from8ptr = (u8 *) & alignbuffer;
+
+ for (i = 0; i < bytecount; i++) {
+ *to8ptr++ = *from8ptr++;
+ }
+}
+
+void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount)
+{
+ unsigned i;
+ u32 alignbuffer;
+ u32 *to32ptr = (u32 *) destptr;
+ u32 *from32ptr;
+ u8 *to8ptr;
+ u8 *from8ptr;
+
+ from32ptr = (u32 *) srcptr;
+ while (bytecount > 3) {
+
+ *to32ptr++ = *from32ptr++;
+ bytecount -= 4;
+ }
+
+ alignbuffer = 0;
+ to8ptr = (u8 *) & alignbuffer;
+ from8ptr = (u8 *) from32ptr;
+
+ for (i = 0; i < bytecount; i++) {
+ *to8ptr++ = *from8ptr++;
+ }
+
+ *to32ptr++ = alignbuffer;
+}
+
+void eth_halt (void)
+{
+ debug ("eth_halt\n");
+}
+
+int eth_init (bd_t * bis)
+{
+ debug ("EmacLite Initialization Started\n");
+ memset (&emaclite, 0, sizeof (xemaclite));
+ emaclite.baseaddress = XILINX_EMACLITE_BASEADDR;
+
+ if (!getenv("ethaddr")) {
+ memcpy(bis->bi_enetaddr, emacaddr, ENET_ADDR_LENGTH);
+ }
+
+/*
+ * TX - TX_PING & TX_PONG initialization
+ */
+ /* Restart PING TX */
+ out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
+ /* Copy MAC address */
+ xemaclite_alignedwrite (bis->bi_enetaddr,
+ emaclite.baseaddress, ENET_ADDR_LENGTH);
+ /* Set the length */
+ out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
+ /* Update the MAC address in the EMAC Lite */
+ out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, XEL_TSR_PROG_MAC_ADDR);
+ /* Wait for EMAC Lite to finish with the MAC address update */
+ while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET) &
+ XEL_TSR_PROG_MAC_ADDR) != 0) ;
+
+#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
+ /* The same operation with PONG TX */
+ out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0);
+ xemaclite_alignedwrite (bis->bi_enetaddr, emaclite.baseaddress +
+ XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH);
+ out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
+ out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET,
+ XEL_TSR_PROG_MAC_ADDR);
+ while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET +
+ XEL_BUFFER_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0) ;
+#endif
+
+/*
+ * RX - RX_PING & RX_PONG initialization
+ */
+ /* Write out the value to flush the RX buffer */
+ out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK);
+#ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
+ out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET,
+ XEL_RSR_RECV_IE_MASK);
+#endif
+
+ debug ("EmacLite Initialization complete\n");
+ return 0;
+}
+
+int xemaclite_txbufferavailable (xemaclite * instanceptr)
+{
+ u32 reg;
+ u32 txpingbusy;
+ u32 txpongbusy;
+ /*
+ * Read the other buffer register
+ * and determine if the other buffer is available
+ */
+ reg = in_be32 (instanceptr->baseaddress +
+ instanceptr->nexttxbuffertouse + 0);
+ txpingbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
+ XEL_TSR_XMIT_BUSY_MASK);
+
+ reg = in_be32 (instanceptr->baseaddress +
+ (instanceptr->nexttxbuffertouse ^ XEL_TSR_OFFSET) + 0);
+ txpongbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
+ XEL_TSR_XMIT_BUSY_MASK);
+
+ return (!(txpingbusy && txpongbusy));
+}
+
+int eth_send (volatile void *ptr, int len) {
+
+ unsigned int reg;
+ unsigned int baseaddress;
+
+ unsigned maxtry = 1000;
+
+ if (len > ENET_MAX_MTU)
+ len = ENET_MAX_MTU;
+
+ while (!xemaclite_txbufferavailable (&emaclite) && maxtry) {
+ udelay (10);
+ maxtry--;
+ }
+
+ if (!maxtry) {
+ printf ("Error: Timeout waiting for ethernet TX buffer\n");
+ /* Restart PING TX */
+ out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
+#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
+ out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET +
+ XEL_BUFFER_OFFSET, 0);
+#endif
+ return 0;
+ }
+
+ /* Determine the expected TX buffer address */
+ baseaddress = (emaclite.baseaddress + emaclite.nexttxbuffertouse);
+
+ /* Determine if the expected buffer address is empty */
+ reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
+ if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
+ && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
+ & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
+
+#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
+ emaclite.nexttxbuffertouse ^= XEL_BUFFER_OFFSET;
+#endif
+ debug ("Send packet from 0x%x\n", baseaddress);
+ /* Write the frame to the buffer */
+ xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
+ out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
+ (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
+ reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
+ reg |= XEL_TSR_XMIT_BUSY_MASK;
+ if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
+ reg |= XEL_TSR_XMIT_ACTIVE_MASK;
+ }
+ out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
+ return 1;
+ }
+#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
+ /* Switch to second buffer */
+ baseaddress ^= XEL_BUFFER_OFFSET;
+ /* Determine if the expected buffer address is empty */
+ reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
+ if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
+ && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
+ & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
+ debug ("Send packet from 0x%x\n", baseaddress);
+ /* Write the frame to the buffer */
+ xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
+ out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
+ (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
+ reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
+ reg |= XEL_TSR_XMIT_BUSY_MASK;
+ if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
+ reg |= XEL_TSR_XMIT_ACTIVE_MASK;
+ }
+ out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
+ return 1;
+ }
+#endif
+ puts ("Error while sending frame\n");
+ return 0;
+}
+
+int eth_rx (void)
+{
+ unsigned int length;
+ unsigned int reg;
+ unsigned int baseaddress;
+
+ baseaddress = emaclite.baseaddress + emaclite.nextrxbuffertouse;
+ reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
+ debug ("Testing data at address 0x%x\n", baseaddress);
+ if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
+#ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
+ emaclite.nextrxbuffertouse ^= XEL_BUFFER_OFFSET;
+#endif
+ } else {
+#ifndef CONFIG_XILINX_EMACLITE_RX_PING_PONG
+ debug ("No data was available - address 0x%x\n", baseaddress);
+ return 0;
+#else
+ baseaddress ^= XEL_BUFFER_OFFSET;
+ reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
+ if ((reg & XEL_RSR_RECV_DONE_MASK) !=
+ XEL_RSR_RECV_DONE_MASK) {
+ debug ("No data was available - address 0x%x\n",
+ baseaddress);
+ return 0;
+ }
+#endif
+ }
+ /* Get the length of the frame that arrived */
+ switch(((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC)) &
+ 0xFFFF0000 ) >> 16) {
+ case 0x806:
+ length = 42 + 20; /* FIXME size of ARP */
+ debug ("ARP Packet\n");
+ break;
+ case 0x800:
+ length = 14 + 14 +
+ (((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0x10)) &
+ 0xFFFF0000) >> 16); /* FIXME size of IP packet */
+ debug ("IP Packet\n");
+ break;
+ default:
+ debug ("Other Packet\n");
+ length = ENET_MAX_MTU;
+ break;
+ }
+
+ xemaclite_alignedread ((u32 *) (baseaddress + XEL_RXBUFF_OFFSET),
+ etherrxbuff, length);
+
+ /* Acknowledge the frame */
+ reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
+ reg &= ~XEL_RSR_RECV_DONE_MASK;
+ out_be32 (baseaddress + XEL_RSR_OFFSET, reg);
+
+ debug ("Packet receive from 0x%x, length %dB\n", baseaddress, length);
+ NetReceive ((uchar *) etherrxbuff, length);
+ return 1;
+
+}
LOAD_ADDR = 0x8C000000
endif
+ifeq ($(ARCH),sparc)
+LOAD_ADDR = 0x00000000 -L $(gcclibdir) -T sparc.lds
+endif
include $(TOPDIR)/config.mk
--- /dev/null
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+OUTPUT_FORMAT("elf32-sparc", "elf32-sparc", "elf32-sparc")
+OUTPUT_ARCH(sparc)
+ENTRY(_start)
+
+SECTIONS
+{
+ .text :
+ {
+ *(.text)
+ }
+ __text_end = .;
+
+ . = ALIGN(4);
+ .rodata :
+ {
+ *(.rodata)
+ }
+ __rodata_end = .;
+
+ . = ALIGN(4);
+ .data :
+ {
+ *(.data)
+ }
+ . = ALIGN(4);
+ __data_end = .;
+
+ __bss_start = .;
+ . = ALIGN(4);
+ .bss :
+ {
+ *(.bss)
+ }
+ . = ALIGN(4);
+ __bss_end = .;
+ _end = .;
+}
" nop\n" \
" nop\n" \
: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r1");
+#elif defined(CONFIG_SPARC)
+/*
+ * g7 holds the pointer to the global_data. g1 is call clobbered.
+ */
+#define EXPORT_FUNC(x) \
+ asm volatile( \
+" .globl\t" #x "\n" \
+#x ":\n" \
+" set %0, %%g1\n" \
+" or %%g1, %%g7, %%g1\n" \
+" ld [%%g1], %%g1\n" \
+" ld [%%g1 + %1], %%g1\n" \
+" call %%g1\n" \
+" nop\n" \
+ : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x) : "g1" );
+
#else
#error stubs definition missing for this architecture
#endif
--- /dev/null
+/* Interface for accessing Gaisler AMBA Plug&Play Bus.
+ * The AHB bus can be interfaced with a simpler bus -
+ * the APB bus, also freely available in GRLIB at
+ * www.gaisler.com.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __AMBAPP_H__
+#define __AMBAPP_H__
+
+/* Default location of Plug&Play info
+ * normally 0xfffff000 for AHB masters
+ * and 0xfffff800 for AHB slaves.
+ * Normally no need to change this.
+ */
+#define LEON3_IO_AREA 0xfff00000
+#define LEON3_CONF_AREA 0xff000
+#define LEON3_AHB_SLAVE_CONF_AREA (1 << 11)
+
+/* Max devices this software will support */
+#define LEON3_AHB_MASTERS 16
+#define LEON3_AHB_SLAVES 16
+ /*#define LEON3_APB_MASTERS 1*//* Number of APB buses that has Plug&Play */
+#define LEON3_APB_SLAVES 16 /* Total number of APB slaves per APB bus */
+
+/* Vendor codes */
+#define VENDOR_GAISLER 1
+#define VENDOR_PENDER 2
+#define VENDOR_ESA 4
+#define VENDOR_ASTRIUM 6
+#define VENDOR_OPENCHIP 7
+#define VENDOR_OPENCORES 8
+#define VENDOR_CONTRIB 9
+#define VENDOR_EONIC 11
+#define VENDOR_RADIONOR 15
+#define VENDOR_GLEICHMANN 16
+#define VENDOR_MENTA 17
+#define VENDOR_SUN 19
+#define VENDOR_EMBEDDIT 234
+#define VENDOR_CAL 202
+
+/* Gaisler Research device id's */
+#define GAISLER_LEON3 0x003
+#define GAISLER_LEON3DSU 0x004
+#define GAISLER_ETHAHB 0x005
+#define GAISLER_APBMST 0x006
+#define GAISLER_AHBUART 0x007
+#define GAISLER_SRCTRL 0x008
+#define GAISLER_SDCTRL 0x009
+#define GAISLER_APBUART 0x00C
+#define GAISLER_IRQMP 0x00D
+#define GAISLER_AHBRAM 0x00E
+#define GAISLER_GPTIMER 0x011
+#define GAISLER_PCITRG 0x012
+#define GAISLER_PCISBRG 0x013
+#define GAISLER_PCIFBRG 0x014
+#define GAISLER_PCITRACE 0x015
+#define GAISLER_PCIDMA 0x016
+#define GAISLER_AHBTRACE 0x017
+#define GAISLER_ETHDSU 0x018
+#define GAISLER_PIOPORT 0x01A
+#define GAISLER_AHBJTAG 0x01c
+#define GAISLER_SPW 0x01f
+#define GAISLER_ATACTRL 0x024
+#define GAISLER_VGA 0x061
+#define GAISLER_KBD 0X060
+#define GAISLER_ETHMAC 0x01D
+#define GAISLER_DDRSPA 0x025
+#define GAISLER_EHCI 0x026
+#define GAISLER_UHCI 0x027
+#define GAISLER_SPW2 0x029
+#define GAISLER_DDR2SPA 0x02E
+#define GAISLER_AHBSTAT 0x052
+#define GAISLER_FTMCTRL 0x054
+
+#define GAISLER_L2TIME 0xffd /* internal device: leon2 timer */
+#define GAISLER_L2C 0xffe /* internal device: leon2compat */
+#define GAISLER_PLUGPLAY 0xfff /* internal device: plug & play configarea */
+
+/* European Space Agency device id's */
+#define ESA_LEON2 0x2
+#define ESA_MCTRL 0xF
+
+/* Opencores device id's */
+#define OPENCORES_PCIBR 0x4
+#define OPENCORES_ETHMAC 0x5
+
+/* Vendor codes */
+
+/*
+ *
+ * Macros for manipulating Configuration registers
+ *
+ */
+
+#define amba_vendor(x) (((x) >> 24) & 0xff)
+
+#define amba_device(x) (((x) >> 12) & 0xfff)
+
+#define amba_membar_start(mbar) \
+ (((mbar) & 0xfff00000) & (((mbar) & 0xfff0) << 16))
+
+#define amba_iobar_start(base, iobar) \
+ ((base) | ((((iobar) & 0xfff00000)>>12) & (((iobar) & 0xfff0)<<4)) )
+
+#define amba_irq(conf) ((conf) & 0xf)
+
+#define amba_ver(conf) (((conf)>>5) & 0x1f)
+
+#define amba_membar_type(mbar) ((mbar) & 0xf)
+
+#define amba_membar_mask(mbar) (((mbar)>>4) & 0xfff)
+
+#define AMBA_TYPE_APBIO 0x1
+#define AMBA_TYPE_MEM 0x2
+#define AMBA_TYPE_AHBIO 0x3
+
+#define AMBA_TYPE_AHBIO_ADDR(addr) (LEON3_IO_AREA | ((addr) >> 12))
+
+#ifndef __ASSEMBLER__
+
+#ifdef CONFIG_CMD_AMBAPP
+
+/* AMBA Plug&Play relocation & initialization */
+int ambapp_init_reloc(void);
+
+/* AMBA Plug&Play Name of Vendors and devices */
+
+/* Return name of device */
+char *ambapp_device_id2str(int vendor, int id);
+
+/* Return name of vendor */
+char *ambapp_vendor_id2str(int vendor);
+#endif
+
+/*
+ * Types and structure used for AMBA Plug & Play bus scanning
+ */
+
+/* AMBA Plug&Play AHB information layout */
+typedef struct {
+ unsigned int conf;
+ unsigned int userdef[3];
+ unsigned int bars[4];
+} ahbctrl_pp_dev;
+
+/* Prototypes for scanning AMBA Plug&Play bus for AMBA
+ * i) AHB Masters
+ * ii) AHB Slaves
+ * iii) APB Slaves (APB MST is a AHB Slave)
+ */
+
+typedef struct {
+ unsigned char irq;
+ unsigned char ver;
+ unsigned int address;
+} ambapp_apbdev;
+
+typedef struct {
+ unsigned char irq;
+ unsigned char ver;
+ unsigned int userdef[3];
+ unsigned int address[4];
+} ambapp_ahbdev;
+
+/* AMBA Plug&Play AHB Masters & Slaves information locations
+ * Max devices is 64 supported by HW, however often only 8
+ * are used.
+ */
+typedef struct {
+ ahbctrl_pp_dev masters[64];
+ ahbctrl_pp_dev slaves[64];
+} ahbctrl_info;
+
+/* AMBA Plug&Play AHB information layout */
+typedef struct {
+ unsigned int conf;
+ unsigned int bar;
+} apbctrl_pp_dev;
+
+/* All functions return the number of found devices
+ * 0 = no devices found
+ */
+
+/****************************** APB SLAVES ******************************/
+int ambapp_apb_count(unsigned int vendor, unsigned int driver);
+
+int ambapp_apb_first(unsigned int vendor,
+ unsigned int driver, ambapp_apbdev * dev);
+
+int ambapp_apb_next(unsigned int vendor,
+ unsigned int driver, ambapp_apbdev * dev, int index);
+
+int ambapp_apbs_first(unsigned int vendor,
+ unsigned int driver, ambapp_apbdev * dev, int max_cnt);
+
+/****************************** AHB MASTERS ******************************/
+int ambapp_ahbmst_count(unsigned int vendor, unsigned int driver);
+
+int ambapp_ahbmst_first(unsigned int vendor,
+ unsigned int driver, ambapp_ahbdev * dev);
+
+int ambapp_ahbmst_next(unsigned int vendor,
+ unsigned int driver, ambapp_ahbdev * dev, int index);
+
+int ambapp_ahbmsts_first(unsigned int vendor,
+ unsigned int driver, ambapp_ahbdev * dev, int max_cnt);
+
+/****************************** AHB SLAVES ******************************/
+int ambapp_ahbslv_count(unsigned int vendor, unsigned int driver);
+
+int ambapp_ahbslv_first(unsigned int vendor,
+ unsigned int driver, ambapp_ahbdev * dev);
+
+int ambapp_ahbslv_next(unsigned int vendor,
+ unsigned int driver, ambapp_ahbdev * dev, int index);
+
+int ambapp_ahbslvs_first(unsigned int vendor,
+ unsigned int driver, ambapp_ahbdev * dev, int max_cnt);
+
+/*************************** AHB/APB only regs functions *************************
+ * During start up, no memory is available we can use the simplified functions
+ * to get to the memory controller.
+ *
+ * Functions uses no stack/memory, only registers.
+ */
+unsigned int ambapp_apb_next_nomem(register unsigned int vendor, /* Plug&Play Vendor ID */
+ register unsigned int driver, /* Plug&Play Device ID */
+ register int index);
+
+ahbctrl_pp_dev *ambapp_ahb_next_nomem(register unsigned int vendor, /* Plug&Play Vendor ID */
+ register unsigned int driver, /* Plug&Play Device ID */
+ register unsigned int opts, /* scan for AHB 1=slave, 0=masters */
+ register int index);
+
+unsigned int ambapp_ahb_get_info(ahbctrl_pp_dev * ahb, int info);
+
+/*************************** AMBA Plug&Play device register MAPS *****************/
+
+/*
+ * The following defines the bits in the LEON UART Status Registers.
+ */
+
+#define LEON_REG_UART_STATUS_DR 0x00000001 /* Data Ready */
+#define LEON_REG_UART_STATUS_TSE 0x00000002 /* TX Send Register Empty */
+#define LEON_REG_UART_STATUS_THE 0x00000004 /* TX Hold Register Empty */
+#define LEON_REG_UART_STATUS_BR 0x00000008 /* Break Error */
+#define LEON_REG_UART_STATUS_OE 0x00000010 /* RX Overrun Error */
+#define LEON_REG_UART_STATUS_PE 0x00000020 /* RX Parity Error */
+#define LEON_REG_UART_STATUS_FE 0x00000040 /* RX Framing Error */
+#define LEON_REG_UART_STATUS_ERR 0x00000078 /* Error Mask */
+
+/*
+ * The following defines the bits in the LEON UART Ctrl Registers.
+ */
+
+#define LEON_REG_UART_CTRL_RE 0x00000001 /* Receiver enable */
+#define LEON_REG_UART_CTRL_TE 0x00000002 /* Transmitter enable */
+#define LEON_REG_UART_CTRL_RI 0x00000004 /* Receiver interrupt enable */
+#define LEON_REG_UART_CTRL_TI 0x00000008 /* Transmitter interrupt enable */
+#define LEON_REG_UART_CTRL_PS 0x00000010 /* Parity select */
+#define LEON_REG_UART_CTRL_PE 0x00000020 /* Parity enable */
+#define LEON_REG_UART_CTRL_FL 0x00000040 /* Flow control enable */
+#define LEON_REG_UART_CTRL_LB 0x00000080 /* Loop Back enable */
+#define LEON_REG_UART_CTRL_DBG (1<<11) /* Debug Bit used by GRMON */
+
+#define LEON3_GPTIMER_EN 1
+#define LEON3_GPTIMER_RL 2
+#define LEON3_GPTIMER_LD 4
+#define LEON3_GPTIMER_IRQEN 8
+
+/*
+ * The following defines the bits in the LEON PS/2 Status Registers.
+ */
+
+#define LEON_REG_PS2_STATUS_DR 0x00000001 /* Data Ready */
+#define LEON_REG_PS2_STATUS_PE 0x00000002 /* Parity error */
+#define LEON_REG_PS2_STATUS_FE 0x00000004 /* Framing error */
+#define LEON_REG_PS2_STATUS_KI 0x00000008 /* Keyboard inhibit */
+
+/*
+ * The following defines the bits in the LEON PS/2 Ctrl Registers.
+ */
+
+#define LEON_REG_PS2_CTRL_RE 0x00000001 /* Receiver enable */
+#define LEON_REG_PS2_CTRL_TE 0x00000002 /* Transmitter enable */
+#define LEON_REG_PS2_CTRL_RI 0x00000004 /* Keyboard receive interrupt */
+#define LEON_REG_PS2_CTRL_TI 0x00000008 /* Keyboard transmit interrupt */
+
+typedef struct {
+ volatile unsigned int ilevel;
+ volatile unsigned int ipend;
+ volatile unsigned int iforce;
+ volatile unsigned int iclear;
+ volatile unsigned int mstatus;
+ volatile unsigned int notused[11];
+ volatile unsigned int cpu_mask[16];
+ volatile unsigned int cpu_force[16];
+} ambapp_dev_irqmp;
+
+typedef struct {
+ volatile unsigned int data;
+ volatile unsigned int status;
+ volatile unsigned int ctrl;
+ volatile unsigned int scaler;
+} ambapp_dev_apbuart;
+
+typedef struct {
+ volatile unsigned int val;
+ volatile unsigned int rld;
+ volatile unsigned int ctrl;
+ volatile unsigned int unused;
+} ambapp_dev_gptimer_element;
+
+#define LEON3_GPTIMER_CTRL_EN 0x1 /* Timer enable */
+#define LEON3_GPTIMER_CTRL_RS 0x2 /* Timer reStart */
+#define LEON3_GPTIMER_CTRL_LD 0x4 /* Timer reLoad */
+#define LEON3_GPTIMER_CTRL_IE 0x8 /* interrupt enable */
+#define LEON3_GPTIMER_CTRL_IP 0x10 /* interrupt flag/pending */
+#define LEON3_GPTIMER_CTRL_CH 0x20 /* Chain with previous timer */
+
+typedef struct {
+ volatile unsigned int scalar;
+ volatile unsigned int scalar_reload;
+ volatile unsigned int config;
+ volatile unsigned int unused;
+ volatile ambapp_dev_gptimer_element e[8];
+} ambapp_dev_gptimer;
+
+typedef struct {
+ volatile unsigned int iodata;
+ volatile unsigned int ioout;
+ volatile unsigned int iodir;
+ volatile unsigned int irqmask;
+ volatile unsigned int irqpol;
+ volatile unsigned int irqedge;
+} ambapp_dev_ioport;
+
+typedef struct {
+ volatile unsigned int write;
+ volatile unsigned int dummy;
+ volatile unsigned int txcolor;
+ volatile unsigned int bgcolor;
+} ambapp_dev_textvga;
+
+typedef struct {
+ volatile unsigned int data;
+ volatile unsigned int status;
+ volatile unsigned int ctrl;
+} ambapp_dev_apbps2;
+
+typedef struct {
+ unsigned int mcfg1, mcfg2, mcfg3;
+} ambapp_dev_mctrl;
+
+typedef struct {
+ unsigned int sdcfg;
+} ambapp_dev_sdctrl;
+
+typedef struct {
+ unsigned int cfg1;
+ unsigned int cfg2;
+ unsigned int cfg3;
+} ambapp_dev_ddr2spa;
+
+typedef struct {
+ unsigned int ctrl;
+ unsigned int cfg;
+} ambapp_dev_ddrspa;
+
+#endif
+
+#endif
--- /dev/null
+/* asi.h: Address Space Identifier values for the LEON2 sparc.
+ *
+ * Copyright (C) 2008 Daniel Hellstrom (daniel@gaisler.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _LEON2_ASI_H
+#define _LEON2_ASI_H
+
+#define ASI_CACHEMISS 0x01 /* Force D-Cache miss on load (lda) */
+#define ASI_M_FLUSH_PROBE 0x03 /* MMU Flush/Probe */
+#define ASI_IFLUSH 0x05 /* Flush I-Cache */
+#define ASI_DFLUSH 0x06 /* Flush D-Cache */
+#define ASI_BYPASS 0x1c /* Bypass MMU (Physical address) */
+#define ASI_MMUFLUSH 0x18 /* FLUSH TLB */
+#define ASI_M_MMUREGS 0x19 /* READ/Write MMU Registers */
+
+#endif /* _LEON2_ASI_H */
--- /dev/null
+/* asi.h: Address Space Identifier values for the LEON3 sparc.
+ *
+ * Copyright (C) 2008 Daniel Hellstrom (daniel@gaisler.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _LEON3_ASI_H
+#define _LEON3_ASI_H
+
+#define ASI_CACHEMISS 0x01 /* Force D-Cache miss on load (lda) */
+#define ASI_M_FLUSH_PROBE 0x03 /* MMU Flush/Probe */
+#define ASI_IFLUSH 0x10 /* Flush I-Cache */
+#define ASI_DFLUSH 0x11 /* Flush D-Cache */
+#define ASI_BYPASS 0x1c /* Bypass MMU (Physical address) */
+#define ASI_MMUFLUSH 0x18 /* FLUSH TLB */
+#define ASI_M_MMUREGS 0x19 /* READ/Write MMU Registers */
+
+#endif /* _LEON3_ASI_H */
--- /dev/null
+/* Address Space Identifier (ASI) values for sparc processors.
+ *
+ * (C) Copyright 2008
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _SPARC_ASI_H
+#define _SPARC_ASI_H
+
+/* ASI numbers are processor implementation specific */
+#include <asm/arch/asi.h>
+
+#endif /* _SPARC_ASI_H */
--- /dev/null
+/* Assembler macros for SPARC
+ *
+ * (C) Copyright 2007, taken from linux asm-sparc/asmmacro.h
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __SPARC_ASMMACRO_H__
+#define __SPARC_ASMMACRO_H__
+
+#include <config.h>
+
+/* All trap entry points _must_ begin with this macro or else you
+ * lose. It makes sure the kernel has a proper window so that
+ * c-code can be called.
+ */
+#define SAVE_ALL_HEAD \
+ sethi %hi(trap_setup+(CFG_RELOC_MONITOR_BASE-TEXT_BASE)), %l4; \
+ jmpl %l4 + %lo(trap_setup+(CFG_RELOC_MONITOR_BASE-TEXT_BASE)), %l6;
+#define SAVE_ALL \
+ SAVE_ALL_HEAD \
+ nop;
+
+/* All traps low-level code here must end with this macro. */
+#define RESTORE_ALL b ret_trap_entry; clr %l6;
+
+#endif
--- /dev/null
+/* SPARC atomic operations
+ *
+ * (C) Copyright 2008
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ASM_SPARC_ATOMIC_H_
+#define _ASM_SPARC_ATOMIC_H_
+
+#endif /* _ASM_SPARC_ATOMIC_H_ */
--- /dev/null
+/* Bit string operations on the SPARC
+ *
+ * (C) Copyright 2007, taken from asm-ppc/bitops.h
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _SPARC_BITOPS_H
+#define _SPARC_BITOPS_H
+
+#endif /* _SPARC_BITOPS_H */
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2008
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _SPARC_BYTEORDER_H
+#define _SPARC_BYTEORDER_H
+
+#include <asm/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+#define __BYTEORDER_HAS_U64__
+#endif
+#include <linux/byteorder/big_endian.h>
+#endif /* _SPARC_BYTEORDER_H */
--- /dev/null
+/*
+ * (C) Copyright 2008,
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __SPARC_CACHE_H__
+#define __SPARC_CACHE_H__
+
+#include <linux/config.h>
+#include <asm/processor.h>
+
+#endif
--- /dev/null
+/* SPARC errno definitions, taken from asm-ppc/errno.h
+ *
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SPARC_ERRNO_H__
+#define __SPARC_ERRNO_H__
+
+#define EPERM 1 /* Operation not permitted */
+#define ENOENT 2 /* No such file or directory */
+#define ESRCH 3 /* No such process */
+#define EINTR 4 /* Interrupted system call */
+#define EIO 5 /* I/O error */
+#define ENXIO 6 /* No such device or address */
+#define E2BIG 7 /* Arg list too long */
+#define ENOEXEC 8 /* Exec format error */
+#define EBADF 9 /* Bad file number */
+#define ECHILD 10 /* No child processes */
+#define EAGAIN 11 /* Try again */
+#define ENOMEM 12 /* Out of memory */
+#define EACCES 13 /* Permission denied */
+#define EFAULT 14 /* Bad address */
+#define ENOTBLK 15 /* Block device required */
+#define EBUSY 16 /* Device or resource busy */
+#define EEXIST 17 /* File exists */
+#define EXDEV 18 /* Cross-device link */
+#define ENODEV 19 /* No such device */
+#define ENOTDIR 20 /* Not a directory */
+#define EISDIR 21 /* Is a directory */
+#define EINVAL 22 /* Invalid argument */
+#define ENFILE 23 /* File table overflow */
+#define EMFILE 24 /* Too many open files */
+#define ENOTTY 25 /* Not a typewriter */
+#define ETXTBSY 26 /* Text file busy */
+#define EFBIG 27 /* File too large */
+#define ENOSPC 28 /* No space left on device */
+#define ESPIPE 29 /* Illegal seek */
+#define EROFS 30 /* Read-only file system */
+#define EMLINK 31 /* Too many links */
+#define EPIPE 32 /* Broken pipe */
+#define EDOM 33 /* Math argument out of domain of func */
+#define ERANGE 34 /* Math result not representable */
+#define EDEADLK 35 /* Resource deadlock would occur */
+#define ENAMETOOLONG 36 /* File name too long */
+#define ENOLCK 37 /* No record locks available */
+#define ENOSYS 38 /* Function not implemented */
+#define ENOTEMPTY 39 /* Directory not empty */
+#define ELOOP 40 /* Too many symbolic links encountered */
+#define EWOULDBLOCK EAGAIN /* Operation would block */
+#define ENOMSG 42 /* No message of desired type */
+#define EIDRM 43 /* Identifier removed */
+#define ECHRNG 44 /* Channel number out of range */
+#define EL2NSYNC 45 /* Level 2 not synchronized */
+#define EL3HLT 46 /* Level 3 halted */
+#define EL3RST 47 /* Level 3 reset */
+#define ELNRNG 48 /* Link number out of range */
+#define EUNATCH 49 /* Protocol driver not attached */
+#define ENOCSI 50 /* No CSI structure available */
+#define EL2HLT 51 /* Level 2 halted */
+#define EBADE 52 /* Invalid exchange */
+#define EBADR 53 /* Invalid request descriptor */
+#define EXFULL 54 /* Exchange full */
+#define ENOANO 55 /* No anode */
+#define EBADRQC 56 /* Invalid request code */
+#define EBADSLT 57 /* Invalid slot */
+#define EDEADLOCK 58 /* File locking deadlock error */
+#define EBFONT 59 /* Bad font file format */
+#define ENOSTR 60 /* Device not a stream */
+#define ENODATA 61 /* No data available */
+#define ETIME 62 /* Timer expired */
+#define ENOSR 63 /* Out of streams resources */
+#define ENONET 64 /* Machine is not on the network */
+#define ENOPKG 65 /* Package not installed */
+#define EREMOTE 66 /* Object is remote */
+#define ENOLINK 67 /* Link has been severed */
+#define EADV 68 /* Advertise error */
+#define ESRMNT 69 /* Srmount error */
+#define ECOMM 70 /* Communication error on send */
+#define EPROTO 71 /* Protocol error */
+#define EMULTIHOP 72 /* Multihop attempted */
+#define EDOTDOT 73 /* RFS specific error */
+#define EBADMSG 74 /* Not a data message */
+#define EOVERFLOW 75 /* Value too large for defined data type */
+#define ENOTUNIQ 76 /* Name not unique on network */
+#define EBADFD 77 /* File descriptor in bad state */
+#define EREMCHG 78 /* Remote address changed */
+#define ELIBACC 79 /* Can not access a needed shared library */
+#define ELIBBAD 80 /* Accessing a corrupted shared library */
+#define ELIBSCN 81 /* .lib section in a.out corrupted */
+#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
+#define ELIBEXEC 83 /* Cannot exec a shared library directly */
+#define EILSEQ 84 /* Illegal byte sequence */
+#define ERESTART 85 /* Interrupted system call should be restarted */
+#define ESTRPIPE 86 /* Streams pipe error */
+#define EUSERS 87 /* Too many users */
+#define ENOTSOCK 88 /* Socket operation on non-socket */
+#define EDESTADDRREQ 89 /* Destination address required */
+#define EMSGSIZE 90 /* Message too long */
+#define EPROTOTYPE 91 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 92 /* Protocol not available */
+#define EPROTONOSUPPORT 93 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
+#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
+#define EPFNOSUPPORT 96 /* Protocol family not supported */
+#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
+#define EADDRINUSE 98 /* Address already in use */
+#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
+#define ENETDOWN 100 /* Network is down */
+#define ENETUNREACH 101 /* Network is unreachable */
+#define ENETRESET 102 /* Network dropped connection because of reset */
+#define ECONNABORTED 103 /* Software caused connection abort */
+#define ECONNRESET 104 /* Connection reset by peer */
+#define ENOBUFS 105 /* No buffer space available */
+#define EISCONN 106 /* Transport endpoint is already connected */
+#define ENOTCONN 107 /* Transport endpoint is not connected */
+#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
+#define ETOOMANYREFS 109 /* Too many references: cannot splice */
+#define ETIMEDOUT 110 /* Connection timed out */
+#define ECONNREFUSED 111 /* Connection refused */
+#define EHOSTDOWN 112 /* Host is down */
+#define EHOSTUNREACH 113 /* No route to host */
+#define EALREADY 114 /* Operation already in progress */
+#define EINPROGRESS 115 /* Operation now in progress */
+#define ESTALE 116 /* Stale NFS file handle */
+#define EUCLEAN 117 /* Structure needs cleaning */
+#define ENOTNAM 118 /* Not a XENIX named type file */
+#define ENAVAIL 119 /* No XENIX semaphores available */
+#define EISNAM 120 /* Is a named type file */
+#define EREMOTEIO 121 /* Remote I/O error */
+#define EDQUOT 122 /* Quota exceeded */
+
+#define ENOMEDIUM 123 /* No medium found */
+#define EMEDIUMTYPE 124 /* Wrong medium type */
+
+/* Should never be seen by user programs */
+#define ERESTARTSYS 512
+#define ERESTARTNOINTR 513
+#define ERESTARTNOHAND 514 /* restart if no handler.. */
+#define ENOIOCTLCMD 515 /* No ioctl command */
+
+#define _LAST_ERRNO 515
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_GBL_DATA_H
+#define __ASM_GBL_DATA_H
+
+#include "asm/types.h"
+
+/*
+ * The following data structure is placed in some memory wich is
+ * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
+ * some locked parts of the data cache) to allow for a minimum set of
+ * global variables during system initialization (until we have set
+ * up the memory controller so that we can use RAM).
+ *
+ * Keep it *SMALL* and remember to set CFG_GBL_DATA_SIZE > sizeof(gd_t)
+ */
+
+typedef struct global_data {
+ bd_t *bd;
+ unsigned long flags;
+ unsigned long baudrate;
+ unsigned long cpu_clk; /* CPU clock in Hz! */
+ unsigned long bus_clk;
+
+ unsigned long ram_size; /* RAM size */
+ unsigned long reloc_off; /* Relocation Offset */
+ unsigned long reset_status; /* reset status register at boot */
+ unsigned long env_addr; /* Address of Environment struct */
+ unsigned long env_valid; /* Checksum of Environment valid? */
+ unsigned long have_console; /* serial_init() was called */
+
+#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
+ unsigned long fb_base; /* Base address of framebuffer memory */
+#endif
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+ unsigned long post_log_word; /* Record POST activities */
+ unsigned long post_init_f_time; /* When post_init_f started */
+#endif
+#ifdef CONFIG_BOARD_TYPES
+ unsigned long board_type;
+#endif
+#ifdef CONFIG_MODEM_SUPPORT
+ unsigned long do_mdm_init;
+ unsigned long be_quiet;
+#endif
+#ifdef CONFIG_LWMON
+ unsigned long kbd_status;
+#endif
+ void **jt; /* jump table */
+} gd_t;
+
+/*
+ * Global Data Flags
+ */
+#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
+#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
+#define GD_FLG_SILENT 0x00004 /* Silent mode */
+
+#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("%g7")
+
+#endif /* __ASM_GBL_DATA_H */
--- /dev/null
+/* SPARC I/O definitions
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _SPARC_IO_H
+#define _SPARC_IO_H
+
+/* Nothing to sync, total store ordering (TSO)... */
+#define sync()
+
+/* Forces a cache miss on read/load.
+ * On some architectures we need to bypass the cache when reading
+ * I/O registers so that we are not reading the same status word
+ * over and over again resulting in a hang (until an IRQ if lucky)
+ *
+ */
+#ifndef CFG_HAS_NO_CACHE
+#define READ_BYTE(var) SPARC_NOCACHE_READ_BYTE((unsigned int)(var))
+#define READ_HWORD(var) SPARC_NOCACHE_READ_HWORD((unsigned int)(var))
+#define READ_WORD(var) SPARC_NOCACHE_READ((unsigned int)(var))
+#define READ_DWORD(var) SPARC_NOCACHE_READ_DWORD((unsigned int)(var))
+#else
+#define READ_BYTE(var) (var)
+#define READ_HWORD(var) (var)
+#define READ_WORD(var) (var)
+#define READ_DWORD(var) (var)
+#endif
+
+/*
+ * Generic virtual read/write.
+ */
+#define __arch_getb(a) (READ_BYTE(a))
+#define __arch_getw(a) (READ_HWORD(a))
+#define __arch_getl(a) (READ_WORD(a))
+#define __arch_getq(a) (READ_DWORD(a))
+
+#define __arch_putb(v,a) (*(volatile unsigned char *)(a) = (v))
+#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v))
+#define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v))
+
+#define __raw_writeb(v,a) __arch_putb(v,a)
+#define __raw_writew(v,a) __arch_putw(v,a)
+#define __raw_writel(v,a) __arch_putl(v,a)
+
+#define __raw_readb(a) __arch_getb(a)
+#define __raw_readw(a) __arch_getw(a)
+#define __raw_readl(a) __arch_getl(a)
+#define __raw_readq(a) __arch_getq(a)
+
+/*
+ * Given a physical address and a length, return a virtual address
+ * that can be used to access the memory range with the caching
+ * properties specified by "flags".
+ */
+typedef unsigned long phys_addr_t;
+
+#define MAP_NOCACHE (0)
+#define MAP_WRCOMBINE (0)
+#define MAP_WRBACK (0)
+#define MAP_WRTHROUGH (0)
+
+static inline void *map_physmem(phys_addr_t paddr, unsigned long len,
+ unsigned long flags)
+{
+ return (void *)paddr;
+}
+
+/*
+ * Take down a mapping set up by map_physmem().
+ */
+static inline void unmap_physmem(void *vaddr, unsigned long flags)
+{
+
+}
+
+#endif
--- /dev/null
+/* IRQ functions
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __SPARC_IRQ_H__
+#define __SPARC_IRQ_H__
+
+#include <asm/psr.h>
+
+/* Set SPARC Processor Interrupt Level */
+extern inline void set_pil(unsigned int level)
+{
+ unsigned int psr = get_psr();
+
+ put_psr((psr & ~PSR_PIL) | ((level & 0xf) << PSR_PIL_OFS));
+}
+
+/* Get SPARC Processor Interrupt Level */
+extern inline unsigned int get_pil(void)
+{
+ unsigned int psr = get_psr();
+ return (psr & PSR_PIL) >> PSR_PIL_OFS;
+}
+
+/* Disables interrupts and return current PIL value */
+extern int intLock(void);
+
+/* Sets the PIL to oldLevel */
+extern void intUnlock(int oldLevel);
+
+#endif
--- /dev/null
+/* LEON Header File select
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_LEON_H__
+#define __ASM_LEON_H__
+
+#if defined(CONFIG_LEON3)
+
+#include <asm/leon3.h>
+
+#elif defined(CONFIG_LEON2)
+
+#include <asm/leon2.h>
+
+#else
+
+#error Unknown LEON processor
+
+#endif
+
+/* Common stuff */
+
+#endif
--- /dev/null
+/* LEON2 header file. LEON2 is a SOC processor.
+ *
+ * (C) Copyright 2008
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __LEON2_H__
+#define __LEON2_H__
+
+#ifdef CONFIG_LEON2
+
+/* LEON 2 I/O register definitions */
+#define LEON2_PREGS 0x80000000
+#define LEON2_MCFG1 0x00
+#define LEON2_MCFG2 0x04
+#define LEON2_ECTRL 0x08
+#define LEON2_FADDR 0x0C
+#define LEON2_MSTAT 0x10
+#define LEON2_CCTRL 0x14
+#define LEON2_PWDOWN 0x18
+#define LEON2_WPROT1 0x1C
+#define LEON2_WPROT2 0x20
+#define LEON2_LCONF 0x24
+#define LEON2_TCNT0 0x40
+#define LEON2_TRLD0 0x44
+#define LEON2_TCTRL0 0x48
+#define LEON2_TCNT1 0x50
+#define LEON2_TRLD1 0x54
+#define LEON2_TCTRL1 0x58
+#define LEON2_SCNT 0x60
+#define LEON2_SRLD 0x64
+#define LEON2_UART0 0x70
+#define LEON2_UDATA0 0x70
+#define LEON2_USTAT0 0x74
+#define LEON2_UCTRL0 0x78
+#define LEON2_USCAL0 0x7C
+#define LEON2_UART1 0x80
+#define LEON2_UDATA1 0x80
+#define LEON2_USTAT1 0x84
+#define LEON2_UCTRL1 0x88
+#define LEON2_USCAL1 0x8C
+#define LEON2_IMASK 0x90
+#define LEON2_IPEND 0x94
+#define LEON2_IFORCE 0x98
+#define LEON2_ICLEAR 0x9C
+#define LEON2_IOREG 0xA0
+#define LEON2_IODIR 0xA4
+#define LEON2_IOICONF 0xA8
+#define LEON2_IPEND2 0xB0
+#define LEON2_IMASK2 0xB4
+#define LEON2_ISTAT2 0xB8
+#define LEON2_ICLEAR2 0xBC
+
+#ifndef __ASSEMBLER__
+/*
+ * Structure for LEON memory mapped registers.
+ *
+ * Source: Section 6.1 - On-chip registers
+ *
+ * NOTE: There is only one of these structures per CPU, its base address
+ * is 0x80000000, and the variable LEON_REG is placed there by the
+ * linkcmds file.
+ */
+typedef struct {
+ volatile unsigned int Memory_Config_1;
+ volatile unsigned int Memory_Config_2;
+ volatile unsigned int Edac_Control;
+ volatile unsigned int Failed_Address;
+ volatile unsigned int Memory_Status;
+ volatile unsigned int Cache_Control;
+ volatile unsigned int Power_Down;
+ volatile unsigned int Write_Protection_1;
+ volatile unsigned int Write_Protection_2;
+ volatile unsigned int Leon_Configuration;
+ volatile unsigned int dummy2;
+ volatile unsigned int dummy3;
+ volatile unsigned int dummy4;
+ volatile unsigned int dummy5;
+ volatile unsigned int dummy6;
+ volatile unsigned int dummy7;
+ volatile unsigned int Timer_Counter_1;
+ volatile unsigned int Timer_Reload_1;
+ volatile unsigned int Timer_Control_1;
+ volatile unsigned int Watchdog;
+ volatile unsigned int Timer_Counter_2;
+ volatile unsigned int Timer_Reload_2;
+ volatile unsigned int Timer_Control_2;
+ volatile unsigned int dummy8;
+ volatile unsigned int Scaler_Counter;
+ volatile unsigned int Scaler_Reload;
+ volatile unsigned int dummy9;
+ volatile unsigned int dummy10;
+ volatile unsigned int UART_Channel_1;
+ volatile unsigned int UART_Status_1;
+ volatile unsigned int UART_Control_1;
+ volatile unsigned int UART_Scaler_1;
+ volatile unsigned int UART_Channel_2;
+ volatile unsigned int UART_Status_2;
+ volatile unsigned int UART_Control_2;
+ volatile unsigned int UART_Scaler_2;
+ volatile unsigned int Interrupt_Mask;
+ volatile unsigned int Interrupt_Pending;
+ volatile unsigned int Interrupt_Force;
+ volatile unsigned int Interrupt_Clear;
+ volatile unsigned int PIO_Data;
+ volatile unsigned int PIO_Direction;
+ volatile unsigned int PIO_Interrupt;
+} LEON2_regs;
+
+typedef struct {
+ volatile unsigned int UART_Channel;
+ volatile unsigned int UART_Status;
+ volatile unsigned int UART_Control;
+ volatile unsigned int UART_Scaler;
+} LEON2_Uart_regs;
+
+#endif
+
+/*
+ * The following constants are intended to be used ONLY in assembly
+ * language files.
+ *
+ * NOTE: The intended style of usage is to load the address of LEON REGS
+ * into a register and then use these as displacements from
+ * that register.
+ */
+#define LEON_REG_MEMCFG1_OFFSET 0x00
+#define LEON_REG_MEMCFG2_OFFSET 0x04
+#define LEON_REG_EDACCTRL_OFFSET 0x08
+#define LEON_REG_FAILADDR_OFFSET 0x0C
+#define LEON_REG_MEMSTATUS_OFFSET 0x10
+#define LEON_REG_CACHECTRL_OFFSET 0x14
+#define LEON_REG_POWERDOWN_OFFSET 0x18
+#define LEON_REG_WRITEPROT1_OFFSET 0x1C
+#define LEON_REG_WRITEPROT2_OFFSET 0x20
+#define LEON_REG_LEONCONF_OFFSET 0x24
+#define LEON_REG_UNIMPLEMENTED_2_OFFSET 0x28
+#define LEON_REG_UNIMPLEMENTED_3_OFFSET 0x2C
+#define LEON_REG_UNIMPLEMENTED_4_OFFSET 0x30
+#define LEON_REG_UNIMPLEMENTED_5_OFFSET 0x34
+#define LEON_REG_UNIMPLEMENTED_6_OFFSET 0x38
+#define LEON_REG_UNIMPLEMENTED_7_OFFSET 0x3C
+#define LEON_REG_TIMERCNT1_OFFSET 0x40
+#define LEON_REG_TIMERLOAD1_OFFSET 0x44
+#define LEON_REG_TIMERCTRL1_OFFSET 0x48
+#define LEON_REG_WDOG_OFFSET 0x4C
+#define LEON_REG_TIMERCNT2_OFFSET 0x50
+#define LEON_REG_TIMERLOAD2_OFFSET 0x54
+#define LEON_REG_TIMERCTRL2_OFFSET 0x58
+#define LEON_REG_UNIMPLEMENTED_8_OFFSET 0x5C
+#define LEON_REG_SCALERCNT_OFFSET 0x60
+#define LEON_REG_SCALER_LOAD_OFFSET 0x64
+#define LEON_REG_UNIMPLEMENTED_9_OFFSET 0x68
+#define LEON_REG_UNIMPLEMENTED_10_OFFSET 0x6C
+#define LEON_REG_UARTDATA1_OFFSET 0x70
+#define LEON_REG_UARTSTATUS1_OFFSET 0x74
+#define LEON_REG_UARTCTRL1_OFFSET 0x78
+#define LEON_REG_UARTSCALER1_OFFSET 0x7C
+#define LEON_REG_UARTDATA2_OFFSET 0x80
+#define LEON_REG_UARTSTATUS2_OFFSET 0x84
+#define LEON_REG_UARTCTRL2_OFFSET 0x88
+#define LEON_REG_UARTSCALER2_OFFSET 0x8C
+#define LEON_REG_IRQMASK_OFFSET 0x90
+#define LEON_REG_IRQPEND_OFFSET 0x94
+#define LEON_REG_IRQFORCE_OFFSET 0x98
+#define LEON_REG_IRQCLEAR_OFFSET 0x9C
+#define LEON_REG_PIODATA_OFFSET 0xA0
+#define LEON_REG_PIODIR_OFFSET 0xA4
+#define LEON_REG_PIOIRQ_OFFSET 0xA8
+#define LEON_REG_SIM_RAM_SIZE_OFFSET 0xF4
+#define LEON_REG_SIM_ROM_SIZE_OFFSET 0xF8
+
+/*
+ * Interrupt Sources
+ *
+ * The interrupt source numbers directly map to the trap type and to
+ * the bits used in the Interrupt Clear, Interrupt Force, Interrupt Mask,
+ * and the Interrupt Pending Registers.
+ */
+#define LEON_INTERRUPT_CORRECTABLE_MEMORY_ERROR 1
+#define LEON_INTERRUPT_UART_1_RX_TX 2
+#define LEON_INTERRUPT_UART_0_RX_TX 3
+#define LEON_INTERRUPT_EXTERNAL_0 4
+#define LEON_INTERRUPT_EXTERNAL_1 5
+#define LEON_INTERRUPT_EXTERNAL_2 6
+#define LEON_INTERRUPT_EXTERNAL_3 7
+#define LEON_INTERRUPT_TIMER1 8
+#define LEON_INTERRUPT_TIMER2 9
+#define LEON_INTERRUPT_EMPTY1 10
+#define LEON_INTERRUPT_EMPTY2 11
+#define LEON_INTERRUPT_OPEN_ETH 12
+#define LEON_INTERRUPT_EMPTY4 13
+#define LEON_INTERRUPT_EMPTY5 14
+#define LEON_INTERRUPT_EMPTY6 15
+
+/* Timer Bits */
+#define LEON2_TIMER_CTRL_EN 0x1 /* Timer enable */
+#define LEON2_TIMER_CTRL_RS 0x2 /* Timer reStart */
+#define LEON2_TIMER_CTRL_LD 0x4 /* Timer reLoad */
+#define LEON2_TIMER1_IRQNO 8 /* Timer 1 IRQ number */
+#define LEON2_TIMER2_IRQNO 9 /* Timer 2 IRQ number */
+#define LEON2_TIMER1_IE (1<<LEON2_TIMER1_IRQNO) /* Timer 1 interrupt enable */
+#define LEON2_TIMER2_IE (1<<LEON2_TIMER2_IRQNO) /* Timer 2 interrupt enable */
+
+/* UART bits */
+#define LEON2_UART_CTRL_RE 1 /* UART Receiver enable */
+#define LEON2_UART_CTRL_TE 2 /* UART Transmitter enable */
+#define LEON2_UART_CTRL_RI 4 /* UART Receiver Interrupt enable */
+#define LEON2_UART_CTRL_TI 8 /* UART Transmitter Interrupt enable */
+#define LEON2_UART_CTRL_DBG (1<<11) /* Debug Bit used by GRMON */
+
+#define LEON2_UART_STAT_DR 1 /* UART Data Ready */
+#define LEON2_UART_STAT_TSE 2 /* UART Transmit Shift Reg empty */
+#define LEON2_UART_STAT_THE 4 /* UART Transmit Hold Reg empty */
+
+#else
+#error Include LEON2 header file only if LEON2 processor
+#endif
+
+#endif
--- /dev/null
+/* LEON3 header file. LEON3 is a free GPL SOC processor available
+ * at www.gaisler.com.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __LEON3_H__
+#define __LEON3_H__
+
+#ifndef CONFIG_LEON3
+#error Include LEON3 header file only if LEON3 processor
+#endif
+
+/* Not much to define, most is Plug and Play and GRLIB dependent
+ * not LEON3 dependent. See <ambapp.h> for GRLIB timers, interrupt
+ * ctrl, memory controllers etc.
+ */
+
+
+#endif
--- /dev/null
+/* machines.h: Defines for taking apart the machine type value in the
+ * idprom and determining the kind of machine we are on.
+ *
+ * Taken from the SPARC port of Linux.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2007 Daniel Hellstrom (daniel@gaisler.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __SPARC_MACHINES_H__
+#define __SPARC_MACHINES_H__
+
+struct Sun_Machine_Models {
+ char *name;
+ unsigned char id_machtype;
+};
+
+/* Current number of machines we know about that has an IDPROM
+ * machtype entry including one entry for the 0x80 OBP machines.
+ */
+#define NUM_SUN_MACHINES 16
+
+extern struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES];
+
+/* The machine type in the idprom area looks like this:
+ *
+ * ---------------
+ * | ARCH | MACH |
+ * ---------------
+ * 7 4 3 0
+ *
+ * The ARCH field determines the architecture line (sun4, sun4c, etc).
+ * The MACH field determines the machine make within that architecture.
+ */
+
+#define SM_ARCH_MASK 0xf0
+#define SM_SUN4 0x20
+#define M_LEON2 0x30
+#define SM_SUN4C 0x50
+#define SM_SUN4M 0x70
+#define SM_SUN4M_OBP 0x80
+
+#define SM_TYP_MASK 0x0f
+/* Sun4 machines */
+#define SM_4_260 0x01 /* Sun 4/200 series */
+#define SM_4_110 0x02 /* Sun 4/100 series */
+#define SM_4_330 0x03 /* Sun 4/300 series */
+#define SM_4_470 0x04 /* Sun 4/400 series */
+
+/* Leon machines */
+#define M_LEON2_SOC 0x01 /* Leon2 SoC */
+
+/* Sun4c machines Full Name - PROM NAME */
+#define SM_4C_SS1 0x01 /* Sun4c SparcStation 1 - Sun 4/60 */
+#define SM_4C_IPC 0x02 /* Sun4c SparcStation IPC - Sun 4/40 */
+#define SM_4C_SS1PLUS 0x03 /* Sun4c SparcStation 1+ - Sun 4/65 */
+#define SM_4C_SLC 0x04 /* Sun4c SparcStation SLC - Sun 4/20 */
+#define SM_4C_SS2 0x05 /* Sun4c SparcStation 2 - Sun 4/75 */
+#define SM_4C_ELC 0x06 /* Sun4c SparcStation ELC - Sun 4/25 */
+#define SM_4C_IPX 0x07 /* Sun4c SparcStation IPX - Sun 4/50 */
+
+/* Sun4m machines, these predate the OpenBoot. These values only mean
+ * something if the value in the ARCH field is SM_SUN4M, if it is
+ * SM_SUN4M_OBP then you have the following situation:
+ * 1) You either have a sun4d, a sun4e, or a recently made sun4m.
+ * 2) You have to consult OpenBoot to determine which machine this is.
+ */
+#define SM_4M_SS60 0x01 /* Sun4m SparcSystem 600 */
+#define SM_4M_SS50 0x02 /* Sun4m SparcStation 10 */
+#define SM_4M_SS40 0x03 /* Sun4m SparcStation 5 */
+
+/* Sun4d machines -- N/A */
+/* Sun4e machines -- N/A */
+/* Sun4u machines -- N/A */
+
+#endif /* !(_SPARC_MACHINES_H) */
--- /dev/null
+/* page.h: Various defines and such for MMU operations on the Sparc for
+ * the Linux kernel.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2007 Daniel Hellstrom (daniel@gaisler.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _SPARC_PAGE_H
+#define _SPARC_PAGE_H
+
+#include <linux/config.h>
+#ifdef CONFIG_SUN4
+#define PAGE_SHIFT 13
+#else
+#define PAGE_SHIFT 12
+#endif
+
+#ifndef __ASSEMBLY__
+/* I have my suspicions... -DaveM */
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#else
+#define PAGE_SIZE (1 << PAGE_SHIFT)
+#endif
+
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+#endif /* _SPARC_PAGE_H */
--- /dev/null
+/*
+ * (C) Copyright 2000 - 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2007, taken from asm-ppc/posix_types.h
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __SPARC_POSIX_TYPES_H__
+#define __SPARC_POSIX_TYPES_H__
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned int __kernel_dev_t;
+typedef unsigned int __kernel_ino_t;
+typedef unsigned int __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned int __kernel_uid_t;
+typedef unsigned int __kernel_gid_t;
+typedef unsigned int __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_daddr_t;
+typedef char *__kernel_caddr_t;
+typedef short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned int __kernel_old_uid_t;
+typedef unsigned int __kernel_old_gid_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+ int val[2];
+} __kernel_fsid_t;
+
+#ifndef __GNUC__
+
+#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+#define __FD_ZERO(set) \
+ ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
+
+#else /* __GNUC__ */
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) \
+ || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set * fdsetp)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ fdsetp->fds_bits[_tmp] |= (1UL << _rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set * fdsetp)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ fdsetp->fds_bits[_tmp] &= ~(1UL << _rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set * p)
+{
+ unsigned long _tmp = fd / __NFDBITS;
+ unsigned long _rem = fd % __NFDBITS;
+ return (p->fds_bits[_tmp] & (1UL << _rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set * p)
+{
+ unsigned int *tmp = (unsigned int *)p->fds_bits;
+ int i;
+
+ if (__builtin_constant_p(__FDSET_LONGS)) {
+ switch (__FDSET_LONGS) {
+ case 8:
+ tmp[0] = 0;
+ tmp[1] = 0;
+ tmp[2] = 0;
+ tmp[3] = 0;
+ tmp[4] = 0;
+ tmp[5] = 0;
+ tmp[6] = 0;
+ tmp[7] = 0;
+ return;
+ }
+ }
+ i = __FDSET_LONGS;
+ while (i) {
+ i--;
+ *tmp = 0;
+ tmp++;
+ }
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* __GNUC__ */
+#endif /* _SPARC_POSIX_TYPES_H */
--- /dev/null
+/* SPARC Processor specifics
+ * taken from the SPARC port of Linux (ptrace.h).
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_SPARC_PROCESSOR_H
+#define __ASM_SPARC_PROCESSOR_H
+
+#include <asm/arch/asi.h>
+
+#ifdef CONFIG_LEON
+
+/* All LEON processors supported */
+#include <asm/leon.h>
+
+#else
+/* other processors */
+#error Unknown SPARC Processor
+#endif
+
+#ifndef __ASSEMBLY__
+
+/* flush data cache */
+static __inline__ void sparc_dcache_flush_all(void)
+{
+ __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"::"i"(ASI_DFLUSH):"memory");
+}
+
+/* flush instruction cache */
+static __inline__ void sparc_icache_flush_all(void)
+{
+ __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"::"i"(ASI_IFLUSH):"memory");
+}
+
+/* do a cache miss load */
+static __inline__ unsigned long long sparc_load_reg_cachemiss_qword(unsigned
+ long paddr)
+{
+ unsigned long long retval;
+ __asm__ __volatile__("ldda [%1] %2, %0\n\t":
+ "=r"(retval):"r"(paddr), "i"(ASI_CACHEMISS));
+ return retval;
+}
+
+static __inline__ unsigned long sparc_load_reg_cachemiss(unsigned long paddr)
+{
+ unsigned long retval;
+ __asm__ __volatile__("lda [%1] %2, %0\n\t":
+ "=r"(retval):"r"(paddr), "i"(ASI_CACHEMISS));
+ return retval;
+}
+
+static __inline__ unsigned short sparc_load_reg_cachemiss_word(unsigned long
+ paddr)
+{
+ unsigned short retval;
+ __asm__ __volatile__("lduha [%1] %2, %0\n\t":
+ "=r"(retval):"r"(paddr), "i"(ASI_CACHEMISS));
+ return retval;
+}
+
+static __inline__ unsigned char sparc_load_reg_cachemiss_byte(unsigned long
+ paddr)
+{
+ unsigned char retval;
+ __asm__ __volatile__("lduba [%1] %2, %0\n\t":
+ "=r"(retval):"r"(paddr), "i"(ASI_CACHEMISS));
+ return retval;
+}
+
+/* do a physical address bypass write, i.e. for 0x80000000 */
+static __inline__ void sparc_store_reg_bypass(unsigned long paddr,
+ unsigned long value)
+{
+ __asm__ __volatile__("sta %0, [%1] %2\n\t"::"r"(value), "r"(paddr),
+ "i"(ASI_BYPASS):"memory");
+}
+
+static __inline__ unsigned long sparc_load_reg_bypass(unsigned long paddr)
+{
+ unsigned long retval;
+ __asm__ __volatile__("lda [%1] %2, %0\n\t":
+ "=r"(retval):"r"(paddr), "i"(ASI_BYPASS));
+ return retval;
+}
+
+/* Macros for bypassing cache when reading */
+#define SPARC_NOCACHE_READ_DWORD(address) sparc_load_reg_cachemiss_qword((unsigned int)(address))
+#define SPARC_NOCACHE_READ(address) sparc_load_reg_cachemiss((unsigned int)(address))
+#define SPARC_NOCACHE_READ_HWORD(address) sparc_load_reg_cachemiss_word((unsigned int)(address))
+#define SPARC_NOCACHE_READ_BYTE(address) sparc_load_reg_cachemiss_byte((unsigned int)(address))
+
+#define SPARC_BYPASS_READ(address) sparc_load_reg_bypass((unsigned int)(address))
+#define SPARC_BYPASS_WRITE(address,value) sparc_store_reg_bypass((unsigned int)(address),(unsigned int)(value))
+
+#endif
+
+#endif /* __ASM_SPARC_PROCESSOR_H */
--- /dev/null
+/* OpenProm defines mainly taken from linux kernel header files
+ *
+ * openprom.h: Prom structures and defines for access to the OPENBOOT
+ * prom routines and data areas.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2007 Daniel Hellstrom (daniel@gaisler.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __SPARC_OPENPROM_H__
+#define __SPARC_OPENPROM_H__
+
+/* Empirical constants... */
+#define LINUX_OPPROM_MAGIC 0x10010407
+
+#ifndef __ASSEMBLY__
+/* V0 prom device operations. */
+struct linux_dev_v0_funcs {
+ int (*v0_devopen) (char *device_str);
+ int (*v0_devclose) (int dev_desc);
+ int (*v0_rdblkdev) (int dev_desc, int num_blks, int blk_st, char *buf);
+ int (*v0_wrblkdev) (int dev_desc, int num_blks, int blk_st, char *buf);
+ int (*v0_wrnetdev) (int dev_desc, int num_bytes, char *buf);
+ int (*v0_rdnetdev) (int dev_desc, int num_bytes, char *buf);
+ int (*v0_rdchardev) (int dev_desc, int num_bytes, int dummy, char *buf);
+ int (*v0_wrchardev) (int dev_desc, int num_bytes, int dummy, char *buf);
+ int (*v0_seekdev) (int dev_desc, long logical_offst, int from);
+};
+
+/* V2 and later prom device operations. */
+struct linux_dev_v2_funcs {
+ int (*v2_inst2pkg) (int d); /* Convert ihandle to phandle */
+ char *(*v2_dumb_mem_alloc) (char *va, unsigned sz);
+ void (*v2_dumb_mem_free) (char *va, unsigned sz);
+
+ /* To map devices into virtual I/O space. */
+ char *(*v2_dumb_mmap) (char *virta, int which_io, unsigned paddr,
+ unsigned sz);
+ void (*v2_dumb_munmap) (char *virta, unsigned size);
+
+ int (*v2_dev_open) (char *devpath);
+ void (*v2_dev_close) (int d);
+ int (*v2_dev_read) (int d, char *buf, int nbytes);
+ int (*v2_dev_write) (int d, char *buf, int nbytes);
+ int (*v2_dev_seek) (int d, int hi, int lo);
+
+ /* Never issued (multistage load support) */
+ void (*v2_wheee2) (void);
+ void (*v2_wheee3) (void);
+};
+
+struct linux_mlist_v0 {
+ struct linux_mlist_v0 *theres_more;
+ char *start_adr;
+ unsigned num_bytes;
+};
+
+struct linux_mem_v0 {
+ struct linux_mlist_v0 **v0_totphys;
+ struct linux_mlist_v0 **v0_prommap;
+ struct linux_mlist_v0 **v0_available; /* What we can use */
+};
+
+/* Arguments sent to the kernel from the boot prompt. */
+struct linux_arguments_v0 {
+ char *argv[8];
+ char args[100];
+ char boot_dev[2];
+ int boot_dev_ctrl;
+ int boot_dev_unit;
+ int dev_partition;
+ char *kernel_file_name;
+ void *aieee1; /* XXX */
+};
+
+/* V2 and up boot things. */
+struct linux_bootargs_v2 {
+ char **bootpath;
+ char **bootargs;
+ int *fd_stdin;
+ int *fd_stdout;
+};
+
+/* The top level PROM vector. */
+struct linux_romvec {
+ /* Version numbers. */
+ unsigned int pv_magic_cookie;
+ unsigned int pv_romvers;
+ unsigned int pv_plugin_revision;
+ unsigned int pv_printrev;
+
+ /* Version 0 memory descriptors. */
+ struct linux_mem_v0 pv_v0mem;
+
+ /* Node operations. */
+ struct linux_nodeops *pv_nodeops;
+
+ char **pv_bootstr;
+ struct linux_dev_v0_funcs pv_v0devops;
+
+ char *pv_stdin;
+ char *pv_stdout;
+#define PROMDEV_KBD 0 /* input from keyboard */
+#define PROMDEV_SCREEN 0 /* output to screen */
+#define PROMDEV_TTYA 1 /* in/out to ttya */
+#define PROMDEV_TTYB 2 /* in/out to ttyb */
+
+ /* Blocking getchar/putchar. NOT REENTRANT! (grr) */
+ int (*pv_getchar) (void);
+ void (*pv_putchar) (int ch);
+
+ /* Non-blocking variants. */
+ int (*pv_nbgetchar) (void);
+ int (*pv_nbputchar) (int ch);
+
+ void (*pv_putstr) (char *str, int len);
+
+ /* Miscellany. */
+ void (*pv_reboot) (char *bootstr);
+ void (*pv_printf) (__const__ char *fmt, ...);
+ void (*pv_abort) (void);
+ __volatile__ int *pv_ticks;
+ void (*pv_halt) (void);
+ void (**pv_synchook) (void);
+
+ /* Evaluate a forth string, not different proto for V0 and V2->up. */
+ union {
+ void (*v0_eval) (int len, char *str);
+ void (*v2_eval) (char *str);
+ } pv_fortheval;
+
+ struct linux_arguments_v0 **pv_v0bootargs;
+
+ /* Get ether address. */
+ unsigned int (*pv_enaddr) (int d, char *enaddr);
+
+ struct linux_bootargs_v2 pv_v2bootargs;
+ struct linux_dev_v2_funcs pv_v2devops;
+
+ int filler[15];
+
+ /* This one is sun4c/sun4 only. */
+ void (*pv_setctxt) (int ctxt, char *va, int pmeg);
+
+ /* Prom version 3 Multiprocessor routines. This stuff is crazy.
+ * No joke. Calling these when there is only one cpu probably
+ * crashes the machine, have to test this. :-)
+ */
+
+ /* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
+ * 'thiscontext' executing at address 'prog_counter'
+ */
+ int (*v3_cpustart) (unsigned int whichcpu, int ctxtbl_ptr,
+ int thiscontext, char *prog_counter);
+
+ /* v3_cpustop() will cause cpu 'whichcpu' to stop executing
+ * until a resume cpu call is made.
+ */
+ int (*v3_cpustop) (unsigned int whichcpu);
+
+ /* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
+ * resume cpu call is made.
+ */
+ int (*v3_cpuidle) (unsigned int whichcpu);
+
+ /* v3_cpuresume() will resume processor 'whichcpu' executing
+ * starting with whatever 'pc' and 'npc' were left at the
+ * last 'idle' or 'stop' call.
+ */
+ int (*v3_cpuresume) (unsigned int whichcpu);
+};
+
+/* Routines for traversing the prom device tree. */
+struct linux_nodeops {
+ int (*no_nextnode) (int node);
+ int (*no_child) (int node);
+ int (*no_proplen) (int node, char *name);
+ int (*no_getprop) (int node, char *name, char *val);
+ int (*no_setprop) (int node, char *name, char *val, int len);
+ char *(*no_nextprop) (int node, char *name);
+};
+
+/* More fun PROM structures for device probing. */
+#define PROMREG_MAX 16
+#define PROMVADDR_MAX 16
+#define PROMINTR_MAX 15
+
+struct linux_prom_registers {
+ unsigned int which_io; /* is this in OBIO space? */
+ unsigned int phys_addr; /* The physical address of this register */
+ unsigned int reg_size; /* How many bytes does this register take up? */
+};
+
+struct linux_prom_irqs {
+ int pri; /* IRQ priority */
+ int vector; /* This is foobar, what does it do? */
+};
+
+/* Element of the "ranges" vector */
+struct linux_prom_ranges {
+ unsigned int ot_child_space;
+ unsigned int ot_child_base; /* Bus feels this */
+ unsigned int ot_parent_space;
+ unsigned int ot_parent_base; /* CPU looks from here */
+ unsigned int or_size;
+};
+
+/* Ranges and reg properties are a bit different for PCI. */
+struct linux_prom_pci_registers {
+ /*
+ * We don't know what information this field contain.
+ * We guess, PCI device function is in bits 15:8
+ * So, ...
+ */
+ unsigned int which_io; /* Let it be which_io */
+
+ unsigned int phys_hi;
+ unsigned int phys_lo;
+
+ unsigned int size_hi;
+ unsigned int size_lo;
+};
+
+struct linux_prom_pci_ranges {
+ unsigned int child_phys_hi; /* Only certain bits are encoded here. */
+ unsigned int child_phys_mid;
+ unsigned int child_phys_lo;
+
+ unsigned int parent_phys_hi;
+ unsigned int parent_phys_lo;
+
+ unsigned int size_hi;
+ unsigned int size_lo;
+};
+
+struct linux_prom_pci_assigned_addresses {
+ unsigned int which_io;
+
+ unsigned int phys_hi;
+ unsigned int phys_lo;
+
+ unsigned int size_hi;
+ unsigned int size_lo;
+};
+
+struct linux_prom_ebus_ranges {
+ unsigned int child_phys_hi;
+ unsigned int child_phys_lo;
+
+ unsigned int parent_phys_hi;
+ unsigned int parent_phys_mid;
+ unsigned int parent_phys_lo;
+
+ unsigned int size;
+};
+
+/* Offset into the EEPROM where the id PROM is located on the 4c */
+#define IDPROM_OFFSET 0x7d8
+
+/* On sun4m; physical. */
+/* MicroSPARC(-II) does not decode 31rd bit, but it works. */
+#define IDPROM_OFFSET_M 0xfd8
+
+struct idprom {
+ unsigned char id_format; /* Format identifier (always 0x01) */
+ unsigned char id_machtype; /* Machine type */
+ unsigned char id_ethaddr[6]; /* Hardware ethernet address */
+ long id_date; /* Date of manufacture */
+ unsigned int id_sernum:24; /* Unique serial number */
+ unsigned char id_cksum; /* Checksum - xor of the data bytes */
+ unsigned char reserved[16];
+};
+
+extern struct idprom *idprom;
+extern void idprom_init(void);
+
+#define IDPROM_SIZE (sizeof(struct idprom))
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif
--- /dev/null
+/* psr.h: This file holds the macros for masking off various parts of
+ * the processor status register on the Sparc. This is valid
+ * for Version 8. On the V9 this is renamed to the PSTATE
+ * register and its members are accessed as fields like
+ * PSTATE.PRIV for the current CPU privilege level.
+ *
+ * taken from the SPARC port of Linux,
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2007 Daniel Hellstrom (daniel@gaisler.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __SPARC_PSR_H__
+#define __SPARC_PSR_H__
+
+/* The Sparc PSR fields are laid out as the following:
+ *
+ * ------------------------------------------------------------------------
+ * | impl | vers | icc | resv | EC | EF | PIL | S | PS | ET | CWP |
+ * | 31-28 | 27-24 | 23-20 | 19-14 | 13 | 12 | 11-8 | 7 | 6 | 5 | 4-0 |
+ * ------------------------------------------------------------------------
+ */
+#define PSR_CWP 0x0000001f /* current window pointer */
+#define PSR_ET 0x00000020 /* enable traps field */
+#define PSR_PS 0x00000040 /* previous privilege level */
+#define PSR_S 0x00000080 /* current privilege level */
+#define PSR_PIL 0x00000f00 /* processor interrupt level */
+#define PSR_EF 0x00001000 /* enable floating point */
+#define PSR_EC 0x00002000 /* enable co-processor */
+#define PSR_LE 0x00008000 /* SuperSparcII little-endian */
+#define PSR_ICC 0x00f00000 /* integer condition codes */
+#define PSR_C 0x00100000 /* carry bit */
+#define PSR_V 0x00200000 /* overflow bit */
+#define PSR_Z 0x00400000 /* zero bit */
+#define PSR_N 0x00800000 /* negative bit */
+#define PSR_VERS 0x0f000000 /* cpu-version field */
+#define PSR_IMPL 0xf0000000 /* cpu-implementation field */
+
+#define PSR_PIL_OFS 8
+
+#ifndef __ASSEMBLY__
+/* Get the %psr register. */
+extern __inline__ unsigned int get_psr(void)
+{
+ unsigned int psr;
+ __asm__ __volatile__("rd %%psr, %0\n\t"
+ "nop\n\t" "nop\n\t" "nop\n\t":"=r"(psr)
+ : /* no inputs */
+ :"memory");
+
+ return psr;
+}
+
+extern __inline__ void put_psr(unsigned int new_psr)
+{
+ __asm__ __volatile__("wr %0, 0x0, %%psr\n\t" "nop\n\t" "nop\n\t" "nop\n\t": /* no outputs */
+ :"r"(new_psr)
+ :"memory", "cc");
+}
+
+/* Get the %fsr register. Be careful, make sure the floating point
+ * enable bit is set in the %psr when you execute this or you will
+ * incur a trap.
+ */
+
+extern unsigned int fsr_storage;
+
+extern __inline__ unsigned int get_fsr(void)
+{
+ unsigned int fsr = 0;
+
+ __asm__ __volatile__("st %%fsr, %1\n\t"
+ "ld %1, %0\n\t":"=r"(fsr)
+ :"m"(fsr_storage));
+
+ return fsr;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_PSR_H__) */
--- /dev/null
+/* Contain the Stack frame layout on interrupt. pt_regs.
+ * taken from the SPARC port of Linux (ptrace.h).
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __SPARC_PTRACE_H__
+#define __SPARC_PTRACE_H__
+
+#include <asm/psr.h>
+
+/* This struct defines the way the registers are stored on the
+ * stack during a system call and basically all traps.
+ */
+
+#ifndef __ASSEMBLY__
+
+struct pt_regs {
+ unsigned long psr;
+ unsigned long pc;
+ unsigned long npc;
+ unsigned long y;
+ unsigned long u_regs[16]; /* globals and ins */
+};
+
+#define UREG_G0 0
+#define UREG_G1 1
+#define UREG_G2 2
+#define UREG_G3 3
+#define UREG_G4 4
+#define UREG_G5 5
+#define UREG_G6 6
+#define UREG_G7 7
+#define UREG_I0 8
+#define UREG_I1 9
+#define UREG_I2 10
+#define UREG_I3 11
+#define UREG_I4 12
+#define UREG_I5 13
+#define UREG_I6 14
+#define UREG_I7 15
+#define UREG_WIM UREG_G0
+#define UREG_FADDR UREG_G0
+#define UREG_FP UREG_I6
+#define UREG_RETPC UREG_I7
+
+/* A register window */
+struct reg_window {
+ unsigned long locals[8];
+ unsigned long ins[8];
+};
+
+/* A Sparc stack frame */
+struct sparc_stackf {
+ unsigned long locals[8];
+ unsigned long ins[6];
+ struct sparc_stackf *fp;
+ unsigned long callers_pc;
+ char *structptr;
+ unsigned long xargs[6];
+ unsigned long xxargs[1];
+};
+
+#define TRACEREG_SZ sizeof(struct pt_regs)
+#define STACKFRAME_SZ sizeof(struct sparc_stackf)
+
+#else /* __ASSEMBLY__ */
+/* For assembly code. */
+#define TRACEREG_SZ 0x50
+#define STACKFRAME_SZ 0x60
+#endif
+
+/*
+ * The asm_offsets.h is a generated file, so we cannot include it.
+ * It may be OK for glibc headers, but it's utterly pointless for C code.
+ * The assembly code using those offsets has to include it explicitly.
+ */
+/* #include <asm/asm_offsets.h> */
+
+/* These are for pt_regs. */
+#define PT_PSR 0x0
+#define PT_PC 0x4
+#define PT_NPC 0x8
+#define PT_Y 0xc
+#define PT_G0 0x10
+#define PT_WIM PT_G0
+#define PT_G1 0x14
+#define PT_G2 0x18
+#define PT_G3 0x1c
+#define PT_G4 0x20
+#define PT_G5 0x24
+#define PT_G6 0x28
+#define PT_G7 0x2c
+#define PT_I0 0x30
+#define PT_I1 0x34
+#define PT_I2 0x38
+#define PT_I3 0x3c
+#define PT_I4 0x40
+#define PT_I5 0x44
+#define PT_I6 0x48
+#define PT_FP PT_I6
+#define PT_I7 0x4c
+
+/* Reg_window offsets */
+#define RW_L0 0x00
+#define RW_L1 0x04
+#define RW_L2 0x08
+#define RW_L3 0x0c
+#define RW_L4 0x10
+#define RW_L5 0x14
+#define RW_L6 0x18
+#define RW_L7 0x1c
+#define RW_I0 0x20
+#define RW_I1 0x24
+#define RW_I2 0x28
+#define RW_I3 0x2c
+#define RW_I4 0x30
+#define RW_I5 0x34
+#define RW_I6 0x38
+#define RW_I7 0x3c
+
+/* Stack_frame offsets */
+#define SF_L0 0x00
+#define SF_L1 0x04
+#define SF_L2 0x08
+#define SF_L3 0x0c
+#define SF_L4 0x10
+#define SF_L5 0x14
+#define SF_L6 0x18
+#define SF_L7 0x1c
+#define SF_I0 0x20
+#define SF_I1 0x24
+#define SF_I2 0x28
+#define SF_I3 0x2c
+#define SF_I4 0x30
+#define SF_I5 0x34
+#define SF_FP 0x38
+#define SF_PC 0x3c
+#define SF_RETP 0x40
+#define SF_XARG0 0x44
+#define SF_XARG1 0x48
+#define SF_XARG2 0x4c
+#define SF_XARG3 0x50
+#define SF_XARG4 0x54
+#define SF_XARG5 0x58
+#define SF_XXARG 0x5c
+
+/* Stuff for the ptrace system call */
+#define PTRACE_SUNATTACH 10
+#define PTRACE_SUNDETACH 11
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+#define PTRACE_READDATA 16
+#define PTRACE_WRITEDATA 17
+#define PTRACE_READTEXT 18
+#define PTRACE_WRITETEXT 19
+#define PTRACE_GETFPAREGS 20
+#define PTRACE_SETFPAREGS 21
+
+#define PTRACE_GETUCODE 29 /* stupid bsd-ism */
+
+#endif /* !(_SPARC_PTRACE_H) */
--- /dev/null
+/* SRMMU page table defines and code,
+ * taken from the SPARC port of Linux
+ *
+ * Copyright (C) 2007 Daniel Hellstrom (daniel@gaisler.com)
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __SPARC_SRMMU_H__
+#define __SPARC_SRMMU_H__
+
+#include <asm/asi.h>
+#include <asm/page.h>
+
+/* Number of contexts is implementation-dependent; 64k is the most we support */
+#define SRMMU_MAX_CONTEXTS 65536
+
+/* PMD_SHIFT determines the size of the area a second-level page table entry can map */
+#define SRMMU_REAL_PMD_SHIFT 18
+#define SRMMU_REAL_PMD_SIZE (1UL << SRMMU_REAL_PMD_SHIFT)
+#define SRMMU_REAL_PMD_MASK (~(SRMMU_REAL_PMD_SIZE-1))
+#define SRMMU_REAL_PMD_ALIGN(__addr) (((__addr)+SRMMU_REAL_PMD_SIZE-1)&SRMMU_REAL_PMD_MASK)
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SRMMU_PGDIR_SHIFT 24
+#define SRMMU_PGDIR_SIZE (1UL << SRMMU_PGDIR_SHIFT)
+#define SRMMU_PGDIR_MASK (~(SRMMU_PGDIR_SIZE-1))
+#define SRMMU_PGDIR_ALIGN(addr) (((addr)+SRMMU_PGDIR_SIZE-1)&SRMMU_PGDIR_MASK)
+
+#define SRMMU_REAL_PTRS_PER_PTE 64
+#define SRMMU_REAL_PTRS_PER_PMD 64
+#define SRMMU_PTRS_PER_PGD 256
+
+#define SRMMU_REAL_PTE_TABLE_SIZE (SRMMU_REAL_PTRS_PER_PTE*4)
+#define SRMMU_PMD_TABLE_SIZE (SRMMU_REAL_PTRS_PER_PMD*4)
+#define SRMMU_PGD_TABLE_SIZE (SRMMU_PTRS_PER_PGD*4)
+
+/*
+ * To support pagetables in highmem, Linux introduces APIs which
+ * return struct page* and generally manipulate page tables when
+ * they are not mapped into kernel space. Our hardware page tables
+ * are smaller than pages. We lump hardware tabes into big, page sized
+ * software tables.
+ *
+ * PMD_SHIFT determines the size of the area a second-level page table entry
+ * can map, and our pmd_t is 16 times larger than normal. The values which
+ * were once defined here are now generic for 4c and srmmu, so they're
+ * found in pgtable.h.
+ */
+#define SRMMU_PTRS_PER_PMD 4
+
+/* Definition of the values in the ET field of PTD's and PTE's */
+#define SRMMU_ET_MASK 0x3
+#define SRMMU_ET_INVALID 0x0
+#define SRMMU_ET_PTD 0x1
+#define SRMMU_ET_PTE 0x2
+#define SRMMU_ET_REPTE 0x3 /* AIEEE, SuperSparc II reverse endian page! */
+
+/* Physical page extraction from PTP's and PTE's. */
+#define SRMMU_CTX_PMASK 0xfffffff0
+#define SRMMU_PTD_PMASK 0xfffffff0
+#define SRMMU_PTE_PMASK 0xffffff00
+
+/* The pte non-page bits. Some notes:
+ * 1) cache, dirty, valid, and ref are frobbable
+ * for both supervisor and user pages.
+ * 2) exec and write will only give the desired effect
+ * on user pages
+ * 3) use priv and priv_readonly for changing the
+ * characteristics of supervisor ptes
+ */
+#define SRMMU_CACHE 0x80
+#define SRMMU_DIRTY 0x40
+#define SRMMU_REF 0x20
+#define SRMMU_NOREAD 0x10
+#define SRMMU_EXEC 0x08
+#define SRMMU_WRITE 0x04
+#define SRMMU_VALID 0x02 /* SRMMU_ET_PTE */
+#define SRMMU_PRIV 0x1c
+#define SRMMU_PRIV_RDONLY 0x18
+
+#define SRMMU_FILE 0x40 /* Implemented in software */
+
+#define SRMMU_PTE_FILE_SHIFT 8 /* == 32-PTE_FILE_MAX_BITS */
+
+#define SRMMU_CHG_MASK (0xffffff00 | SRMMU_REF | SRMMU_DIRTY)
+
+/* SRMMU swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset. This gives us
+ * 32 swapfiles of 4GB each. Encoding looks like:
+ *
+ * oooooooooooooooooootttttRRRRRRRR
+ * fedcba9876543210fedcba9876543210
+ *
+ * The bottom 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SRMMU_SWP_TYPE_MASK 0x1f
+#define SRMMU_SWP_TYPE_SHIFT SRMMU_PTE_FILE_SHIFT
+#define SRMMU_SWP_OFF_MASK 0x7ffff
+#define SRMMU_SWP_OFF_SHIFT (SRMMU_PTE_FILE_SHIFT + 5)
+
+/* Some day I will implement true fine grained access bits for
+ * user pages because the SRMMU gives us the capabilities to
+ * enforce all the protection levels that vma's can have.
+ * XXX But for now...
+ */
+#define SRMMU_PAGE_NONE __pgprot(SRMMU_CACHE | \
+ SRMMU_PRIV | SRMMU_REF)
+#define SRMMU_PAGE_SHARED __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+ SRMMU_EXEC | SRMMU_WRITE | SRMMU_REF)
+#define SRMMU_PAGE_COPY __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+ SRMMU_EXEC | SRMMU_REF)
+#define SRMMU_PAGE_RDONLY __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+ SRMMU_EXEC | SRMMU_REF)
+#define SRMMU_PAGE_KERNEL __pgprot(SRMMU_VALID | SRMMU_CACHE | SRMMU_PRIV | \
+ SRMMU_DIRTY | SRMMU_REF)
+
+/* SRMMU Register addresses in ASI 0x4. These are valid for all
+ * current SRMMU implementations that exist.
+ */
+#define SRMMU_CTRL_REG 0x00000000
+#define SRMMU_CTXTBL_PTR 0x00000100
+#define SRMMU_CTX_REG 0x00000200
+#define SRMMU_FAULT_STATUS 0x00000300
+#define SRMMU_FAULT_ADDR 0x00000400
+
+#define WINDOW_FLUSH(tmp1, tmp2) \
+ mov 0, tmp1; \
+98: ld [%g6 + TI_UWINMASK], tmp2; \
+ orcc %g0, tmp2, %g0; \
+ add tmp1, 1, tmp1; \
+ bne 98b; \
+ save %sp, -64, %sp; \
+99: subcc tmp1, 1, tmp1; \
+ bne 99b; \
+ restore %g0, %g0, %g0;
+
+#ifndef __ASSEMBLY__
+
+/* This makes sense. Honest it does - Anton */
+/* XXX Yes but it's ugly as sin. FIXME. -KMW */
+extern void *srmmu_nocache_pool;
+#define __nocache_pa(VADDR) (((unsigned long)VADDR) - SRMMU_NOCACHE_VADDR + __pa((unsigned long)srmmu_nocache_pool))
+#define __nocache_va(PADDR) (__va((unsigned long)PADDR) - (unsigned long)srmmu_nocache_pool + SRMMU_NOCACHE_VADDR)
+#define __nocache_fix(VADDR) __va(__nocache_pa(VADDR))
+
+/* Accessing the MMU control register. */
+extern __inline__ unsigned int srmmu_get_mmureg(void)
+{
+ unsigned int retval;
+ __asm__ __volatile__("lda [%%g0] %1, %0\n\t":
+ "=r"(retval):"i"(ASI_M_MMUREGS));
+ return retval;
+}
+
+extern __inline__ void srmmu_set_mmureg(unsigned long regval)
+{
+ __asm__ __volatile__("sta %0, [%%g0] %1\n\t"::"r"(regval),
+ "i"(ASI_M_MMUREGS):"memory");
+
+}
+
+extern __inline__ void srmmu_set_ctable_ptr(unsigned long paddr)
+{
+ paddr = ((paddr >> 4) & SRMMU_CTX_PMASK);
+ __asm__ __volatile__("sta %0, [%1] %2\n\t"::"r"(paddr),
+ "r"(SRMMU_CTXTBL_PTR),
+ "i"(ASI_M_MMUREGS):"memory");
+}
+
+extern __inline__ unsigned long srmmu_get_ctable_ptr(void)
+{
+ unsigned int retval;
+
+ __asm__ __volatile__("lda [%1] %2, %0\n\t":
+ "=r"(retval):
+ "r"(SRMMU_CTXTBL_PTR), "i"(ASI_M_MMUREGS));
+ return (retval & SRMMU_CTX_PMASK) << 4;
+}
+
+extern __inline__ void srmmu_set_context(int context)
+{
+ __asm__ __volatile__("sta %0, [%1] %2\n\t"::"r"(context),
+ "r"(SRMMU_CTX_REG), "i"(ASI_M_MMUREGS):"memory");
+}
+
+extern __inline__ int srmmu_get_context(void)
+{
+ register int retval;
+ __asm__ __volatile__("lda [%1] %2, %0\n\t":
+ "=r"(retval):
+ "r"(SRMMU_CTX_REG), "i"(ASI_M_MMUREGS));
+ return retval;
+}
+
+extern __inline__ unsigned int srmmu_get_fstatus(void)
+{
+ unsigned int retval;
+
+ __asm__ __volatile__("lda [%1] %2, %0\n\t":
+ "=r"(retval):
+ "r"(SRMMU_FAULT_STATUS), "i"(ASI_M_MMUREGS));
+ return retval;
+}
+
+extern __inline__ unsigned int srmmu_get_faddr(void)
+{
+ unsigned int retval;
+
+ __asm__ __volatile__("lda [%1] %2, %0\n\t":
+ "=r"(retval):
+ "r"(SRMMU_FAULT_ADDR), "i"(ASI_M_MMUREGS));
+ return retval;
+}
+
+/* This is guaranteed on all SRMMU's. */
+extern __inline__ void srmmu_flush_whole_tlb(void)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(0x400), /* Flush entire TLB!! */
+ "i"(ASI_M_FLUSH_PROBE):"memory");
+
+}
+
+/* These flush types are not available on all chips... */
+extern __inline__ void srmmu_flush_tlb_ctx(void)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(0x300), /* Flush TLB ctx.. */
+ "i"(ASI_M_FLUSH_PROBE):"memory");
+
+}
+
+extern __inline__ void srmmu_flush_tlb_region(unsigned long addr)
+{
+ addr &= SRMMU_PGDIR_MASK;
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(addr | 0x200), /* Flush TLB region.. */
+ "i"(ASI_M_FLUSH_PROBE):"memory");
+
+}
+
+extern __inline__ void srmmu_flush_tlb_segment(unsigned long addr)
+{
+ addr &= SRMMU_REAL_PMD_MASK;
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(addr | 0x100), /* Flush TLB segment.. */
+ "i"(ASI_M_FLUSH_PROBE):"memory");
+
+}
+
+extern __inline__ void srmmu_flush_tlb_page(unsigned long page)
+{
+ page &= PAGE_MASK;
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(page), /* Flush TLB page.. */
+ "i"(ASI_M_FLUSH_PROBE):"memory");
+
+}
+
+extern __inline__ unsigned long srmmu_hwprobe(unsigned long vaddr)
+{
+ unsigned long retval;
+
+ vaddr &= PAGE_MASK;
+ __asm__ __volatile__("lda [%1] %2, %0\n\t":
+ "=r"(retval):
+ "r"(vaddr | 0x400), "i"(ASI_M_FLUSH_PROBE));
+
+ return retval;
+}
+
+extern __inline__ int srmmu_get_pte(unsigned long addr)
+{
+ register unsigned long entry;
+
+ __asm__ __volatile__("\n\tlda [%1] %2,%0\n\t":
+ "=r"(entry):
+ "r"((addr & 0xfffff000) | 0x400),
+ "i"(ASI_M_FLUSH_PROBE));
+ return entry;
+}
+
+extern unsigned long (*srmmu_read_physical) (unsigned long paddr);
+extern void (*srmmu_write_physical) (unsigned long paddr, unsigned long word);
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_SRMMU_H__) */
--- /dev/null
+/* SPARC stack layout Macros and structures,
+ * mainly taken from BCC (the Bare C compiler for
+ * SPARC LEON2/3) sources.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __SPARC_STACK_H__
+#define __SPARC_STACK_H__
+
+#include <asm/ptrace.h>
+
+#ifndef __ASSEMBLER__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define PT_REGS_SZ sizeof(struct pt_regs)
+
+/* A Sparc stack frame */
+ struct sparc_stackframe_regs {
+ unsigned long sf_locals[8];
+ unsigned long sf_ins[6];
+ struct sparc_stackframe_regs *sf_fp;
+ unsigned long sf_callers_pc;
+ char *sf_structptr;
+ unsigned long sf_xargs[6];
+ unsigned long sf_xxargs[1];
+ };
+#define SF_REGS_SZ sizeof(struct sparc_stackframe_regs)
+
+/* A register window */
+ struct sparc_regwindow_regs {
+ unsigned long locals[8];
+ unsigned long ins[8];
+ };
+#define RW_REGS_SZ sizeof(struct sparc_regwindow_regs)
+
+/* A fpu window */
+ struct sparc_fpuwindow_regs {
+ unsigned long locals[32];
+ unsigned long fsr;
+ unsigned long lastctx;
+ };
+#define FW_REGS_SZ sizeof(struct sparc_fpuwindow_regs)
+
+#ifdef __cplusplus
+}
+#endif
+#else
+#define PT_REGS_SZ 0x50 /* 20*4 */
+#define SF_REGS_SZ 0x60 /* 24*4 */
+#define RW_REGS_SZ 0x20 /* 16*4 */
+#define FW_REGS_SZ 0x88 /* 34*4 */
+#endif /* !ASM */
+
+/* These are for pt_regs. */
+#define PT_PSR 0x0
+#define PT_PC 0x4
+#define PT_NPC 0x8
+#define PT_Y 0xc
+#define PT_G0 0x10
+#define PT_WIM PT_G0
+#define PT_G1 0x14
+#define PT_G2 0x18
+#define PT_G3 0x1c
+#define PT_G4 0x20
+#define PT_G5 0x24
+#define PT_G6 0x28
+#define PT_G7 0x2c
+#define PT_I0 0x30
+#define PT_I1 0x34
+#define PT_I2 0x38
+#define PT_I3 0x3c
+#define PT_I4 0x40
+#define PT_I5 0x44
+#define PT_I6 0x48
+#define PT_FP PT_I6
+#define PT_I7 0x4c
+
+/* Stack_frame offsets */
+#define SF_L0 0x00
+#define SF_L1 0x04
+#define SF_L2 0x08
+#define SF_L3 0x0c
+#define SF_L4 0x10
+#define SF_L5 0x14
+#define SF_L6 0x18
+#define SF_L7 0x1c
+#define SF_I0 0x20
+#define SF_I1 0x24
+#define SF_I2 0x28
+#define SF_I3 0x2c
+#define SF_I4 0x30
+#define SF_I5 0x34
+#define SF_FP 0x38
+#define SF_PC 0x3c
+#define SF_RETP 0x40
+#define SF_XARG0 0x44
+#define SF_XARG1 0x48
+#define SF_XARG2 0x4c
+#define SF_XARG3 0x50
+#define SF_XARG4 0x54
+#define SF_XARG5 0x58
+#define SF_XXARG 0x5c
+
+/* Reg_window offsets */
+#define RW_L0 0x00
+#define RW_L1 0x04
+#define RW_L2 0x08
+#define RW_L3 0x0c
+#define RW_L4 0x10
+#define RW_L5 0x14
+#define RW_L6 0x18
+#define RW_L7 0x1c
+#define RW_I0 0x20
+#define RW_I1 0x24
+#define RW_I2 0x28
+#define RW_I3 0x2c
+#define RW_I4 0x30
+#define RW_I5 0x34
+#define RW_I6 0x38
+#define RW_I7 0x3c
+
+/* Fpu_window offsets */
+#define FW_F0 0x00
+#define FW_F2 0x08
+#define FW_F4 0x10
+#define FW_F6 0x18
+#define FW_F8 0x20
+#define FW_F10 0x28
+#define FW_F12 0x30
+#define FW_F14 0x38
+#define FW_F16 0x40
+#define FW_F18 0x48
+#define FW_F20 0x50
+#define FW_F22 0x58
+#define FW_F24 0x60
+#define FW_F26 0x68
+#define FW_F28 0x70
+#define FW_F30 0x78
+#define FW_FSR 0x80
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000 - 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _SPARC_STRING_H_
+#define _SPARC_STRING_H_
+
+/*
+#define __HAVE_ARCH_STRCPY
+#define __HAVE_ARCH_STRNCPY
+#define __HAVE_ARCH_STRLEN
+#define __HAVE_ARCH_STRCMP
+#define __HAVE_ARCH_STRCAT
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_BCOPY
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+#define __HAVE_ARCH_MEMCMP
+#define __HAVE_ARCH_MEMCHR
+*/
+
+extern int strcasecmp(const char *, const char *);
+extern int strncasecmp(const char *, const char *, int);
+extern char *strcpy(char *, const char *);
+extern char *strncpy(char *, const char *, __kernel_size_t);
+extern __kernel_size_t strlen(const char *);
+extern int strcmp(const char *, const char *);
+extern char *strcat(char *, const char *);
+extern void *memset(void *, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void *memmove(void *, const void *, __kernel_size_t);
+extern int memcmp(const void *, const void *, __kernel_size_t);
+extern void *memchr(const void *, int, __kernel_size_t);
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000 - 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _SPARC_TYPES_H
+#define _SPARC_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+typedef struct {
+ __u32 u[4];
+} __attribute((aligned(16))) vector128;
+
+#ifdef __KERNEL__
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+#define BITS_PER_LONG 32
+
+/* DMA addresses are 32-bits wide */
+typedef u32 dma_addr_t;
+
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000 - 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2007, From asm-ppc/u-boot.h
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************
+ * NOTE: This header file defines an interface to U-Boot. Including
+ * this (unmodified) header file in another file is considered normal
+ * use of U-Boot, and does *not* fall under the heading of "derived
+ * work".
+ ********************************************************************
+ */
+
+#ifndef __U_BOOT_H__
+#define __U_BOOT_H__
+
+/*
+ * Currently, this Board information is not passed to
+ * Linux kernel from U-Boot, but may be passed to other
+ * Operating systems. This is because U-boot emulates
+ * a SUN PROM loader (from Linux point of view).
+ *
+ * include/asm-sparc/u-boot.h
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef struct bd_info {
+ unsigned long bi_memstart; /* start of DRAM memory */
+ unsigned long bi_memsize; /* size of DRAM memory in bytes */
+ unsigned long bi_flashstart; /* start of FLASH memory */
+ unsigned long bi_flashsize; /* size of FLASH memory */
+ unsigned long bi_flashoffset; /* reserved area for startup monitor */
+ unsigned long bi_sramstart; /* start of SRAM memory */
+ unsigned long bi_sramsize; /* size of SRAM memory */
+ unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
+ unsigned long bi_ip_addr; /* IP Address */
+ unsigned char bi_enetaddr[6]; /* Ethernet adress */
+ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
+ unsigned long bi_intfreq; /* Internal Freq, in MHz */
+ unsigned long bi_busfreq; /* Bus Freq, in MHz */
+ unsigned long bi_baudrate; /* Console Baudrate */
+#ifdef CONFIG_HAS_ETH1
+ /* second onboard ethernet port */
+ unsigned char bi_enet1addr[6];
+#endif
+#ifdef CONFIG_HAS_ETH2
+ /* third onboard ethernet port */
+ unsigned char bi_enet2addr[6];
+#endif
+#ifdef CONFIG_HAS_ETH3
+ unsigned char bi_enet3addr[6];
+#endif
+} bd_t;
+
+#endif /* __ASSEMBLY__ */
+#endif /* __U_BOOT_H__ */
--- /dev/null
+/*
+ * Added to U-boot,
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
+ * Copyright (C) 2007
+ *
+ * LEON2/3 LIBIO low-level routines
+ * Written by Jiri Gaisler.
+ * Copyright (C) 2004 Gaisler Research AB
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+*/
+
+#ifndef __SPARC_WINMACRO_H__
+#define __SPARC_WINMACRO_H__
+
+#include <asm/asmmacro.h>
+#include <asm/stack.h>
+
+/* Store the register window onto the 8-byte aligned area starting
+ * at %reg. It might be %sp, it might not, we don't care.
+ */
+#define RW_STORE(reg) \
+ std %l0, [%reg + RW_L0]; \
+ std %l2, [%reg + RW_L2]; \
+ std %l4, [%reg + RW_L4]; \
+ std %l6, [%reg + RW_L6]; \
+ std %i0, [%reg + RW_I0]; \
+ std %i2, [%reg + RW_I2]; \
+ std %i4, [%reg + RW_I4]; \
+ std %i6, [%reg + RW_I6];
+
+/* Load a register window from the area beginning at %reg. */
+#define RW_LOAD(reg) \
+ ldd [%reg + RW_L0], %l0; \
+ ldd [%reg + RW_L2], %l2; \
+ ldd [%reg + RW_L4], %l4; \
+ ldd [%reg + RW_L6], %l6; \
+ ldd [%reg + RW_I0], %i0; \
+ ldd [%reg + RW_I2], %i2; \
+ ldd [%reg + RW_I4], %i4; \
+ ldd [%reg + RW_I6], %i6;
+
+/* Loading and storing struct pt_reg trap frames. */
+#define PT_LOAD_INS(base_reg) \
+ ldd [%base_reg + SF_REGS_SZ + PT_I0], %i0; \
+ ldd [%base_reg + SF_REGS_SZ + PT_I2], %i2; \
+ ldd [%base_reg + SF_REGS_SZ + PT_I4], %i4; \
+ ldd [%base_reg + SF_REGS_SZ + PT_I6], %i6;
+
+#define PT_LOAD_GLOBALS(base_reg) \
+ ld [%base_reg + SF_REGS_SZ + PT_G1], %g1; \
+ ldd [%base_reg + SF_REGS_SZ + PT_G2], %g2; \
+ ldd [%base_reg + SF_REGS_SZ + PT_G4], %g4; \
+ ldd [%base_reg + SF_REGS_SZ + PT_G6], %g6;
+
+#define PT_LOAD_YREG(base_reg, scratch) \
+ ld [%base_reg + SF_REGS_SZ + PT_Y], %scratch; \
+ wr %scratch, 0x0, %y;
+
+#define PT_LOAD_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
+ ld [%base_reg + SF_REGS_SZ + PT_PSR], %pt_psr; \
+ ld [%base_reg + SF_REGS_SZ + PT_PC], %pt_pc; \
+ ld [%base_reg + SF_REGS_SZ + PT_NPC], %pt_npc;
+
+#define PT_LOAD_ALL(base_reg, pt_psr, pt_pc, pt_npc, scratch) \
+ PT_LOAD_YREG(base_reg, scratch) \
+ PT_LOAD_INS(base_reg) \
+ PT_LOAD_GLOBALS(base_reg) \
+ PT_LOAD_PRIV(base_reg, pt_psr, pt_pc, pt_npc)
+
+#define PT_STORE_INS(base_reg) \
+ std %i0, [%base_reg + SF_REGS_SZ + PT_I0]; \
+ std %i2, [%base_reg + SF_REGS_SZ + PT_I2]; \
+ std %i4, [%base_reg + SF_REGS_SZ + PT_I4]; \
+ std %i6, [%base_reg + SF_REGS_SZ + PT_I6];
+
+#define PT_STORE_GLOBALS(base_reg) \
+ st %g1, [%base_reg + SF_REGS_SZ + PT_G1]; \
+ std %g2, [%base_reg + SF_REGS_SZ + PT_G2]; \
+ std %g4, [%base_reg + SF_REGS_SZ + PT_G4]; \
+ std %g6, [%base_reg + SF_REGS_SZ + PT_G6];
+
+#define PT_STORE_YREG(base_reg, scratch) \
+ rd %y, %scratch; \
+ st %scratch, [%base_reg + SF_REGS_SZ + PT_Y];
+
+#define PT_STORE_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
+ st %pt_psr, [%base_reg + SF_REGS_SZ + PT_PSR]; \
+ st %pt_pc, [%base_reg + SF_REGS_SZ + PT_PC]; \
+ st %pt_npc, [%base_reg + SF_REGS_SZ + PT_NPC];
+
+#define PT_STORE_ALL(base_reg, reg_psr, reg_pc, reg_npc, g_scratch) \
+ PT_STORE_PRIV(base_reg, reg_psr, reg_pc, reg_npc) \
+ PT_STORE_GLOBALS(base_reg) \
+ PT_STORE_YREG(base_reg, g_scratch) \
+ PT_STORE_INS(base_reg)
+
+/* Store the fpu register window*/
+#define FW_STORE(reg) \
+ std %f0, [reg + FW_F0]; \
+ std %f2, [reg + FW_F2]; \
+ std %f4, [reg + FW_F4]; \
+ std %f6, [reg + FW_F6]; \
+ std %f8, [reg + FW_F8]; \
+ std %f10, [reg + FW_F10]; \
+ std %f12, [reg + FW_F12]; \
+ std %f14, [reg + FW_F14]; \
+ std %f16, [reg + FW_F16]; \
+ std %f18, [reg + FW_F18]; \
+ std %f20, [reg + FW_F20]; \
+ std %f22, [reg + FW_F22]; \
+ std %f24, [reg + FW_F24]; \
+ std %f26, [reg + FW_F26]; \
+ std %f28, [reg + FW_F28]; \
+ std %f30, [reg + FW_F30]; \
+ st %fsr, [reg + FW_FSR];
+
+/* Load a fpu register window from the area beginning at reg. */
+#define FW_LOAD(reg) \
+ ldd [reg + FW_F0], %f0; \
+ ldd [reg + FW_F2], %f2; \
+ ldd [reg + FW_F4], %f4; \
+ ldd [reg + FW_F6], %f6; \
+ ldd [reg + FW_F8], %f8; \
+ ldd [reg + FW_F10], %f10; \
+ ldd [reg + FW_F12], %f12; \
+ ldd [reg + FW_F14], %f14; \
+ ldd [reg + FW_F16], %f16; \
+ ldd [reg + FW_F18], %f18; \
+ ldd [reg + FW_F20], %f20; \
+ ldd [reg + FW_F22], %f22; \
+ ldd [reg + FW_F24], %f24; \
+ ldd [reg + FW_F26], %f26; \
+ ldd [reg + FW_F28], %f28; \
+ ldd [reg + FW_F30], %f30; \
+ ld [reg + FW_FSR], %fsr;
+
+#endif
* Alphabetical list of all possible commands.
*/
+#define CONFIG_CMD_AMBAPP /* AMBA Plug & Play Bus print utility */
#define CONFIG_CMD_ASKENV /* ask for env variable */
#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
#define CONFIG_CMD_BDI /* bdinfo */
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
- "net_nfs=tftp 200000 ${bootfile};" \
- "run nfsargs addip addtty;" \
- "bootm 200000\0" \
- "net_nfs_fdt=tftp 200000 ${bootfile};" \
+ "net_nfs=tftp 400000 ${bootfile};" \
"tftp ${fdt_addr} ${fdt_file};" \
"run nfsargs addip addtty;" \
- "bootm 200000 - ${fdt_addr}\0" \
+ "bootm 400000 - ${fdt_addr}\0" \
+ "net_nfs_fdt=net_nfs\0" \
"flash_nfs=run nfsargs addip addtty;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"rootpath=/opt/eldk/ppc_4xxFP\0" \
- "fdt_addr=400000\0" \
+ "fdt_addr=800000\0" \
"kernel_addr=fc000000\0" \
"ramdisk_addr=fc200000\0" \
"initrd_high=30000000\0" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
"nload=tftp 200000 ${hostname}/u-boot-nand.bin\0" \
- "nupdate=nand erase 0 60000;nand write 200000 0 60000;" \
+ "nupdate=nand erase 0 100000;nand write 200000 0 100000;" \
"setenv filesize;saveenv\0" \
"nupd=run nload nupdate\0" \
"pciconfighost=1\0" \
--- /dev/null
+/* Configuration header file for Gaisler GR-CPCI-AX2000
+ * AX board. Note that since the AX is removable the configuration
+ * for this board must be edited below.
+ *
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2008
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_LEON3 /* This is an LEON3 CPU */
+#define CONFIG_LEON 1 /* This is an LEON CPU */
+#define CONFIG_CPCI_AX2000 1 /* ... on GR-CPCI-AX2000 board */
+
+#define CONFIG_LEON_RAM_SRAM 1
+#define CONFIG_LEON_RAM_SDRAM 2
+#define CONFIG_LEON_RAM_SDRAM_NOSRAM 3
+
+/* Select Memory to run from
+ *
+ * SRAM - UBoot is run in SRAM, SRAM-0x40000000, SDRAM-0x60000000
+ * SDRAM - UBoot is run in SDRAM, SRAM-0x40000000 and SDRAM-0x60000000
+ * SDRAM_NOSRAM - UBoot is run in SDRAM, SRAM not available, SDRAM at 0x40000000
+ *
+ * Note, if Linux is to be used, SDRAM or SDRAM_NOSRAM is required since
+ * it doesn't fit into the 4Mb SRAM.
+ *
+ * SRAM is default since it will work for all systems, however will not
+ * be able to boot linux.
+ */
+#define CONFIG_LEON_RAM_SELECT CONFIG_LEON_RAM_SRAM
+
+/* CPU / AMBA BUS configuration */
+#define CONFIG_SYS_CLK_FREQ 20000000 /* 20MHz */
+
+/* Number of SPARC register windows */
+#define CFG_SPARC_NWINDOWS 8
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_BAUDRATE 38400 /* ... at 38400 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/* Partitions */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/*
+ * Supported commands
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_AMBAPP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_IRQ
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS_BASE \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs console=ttyS0,38400 root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "getkernel=tftpboot \$\(scratch\)\ \$\(bootfile\)\0" \
+ "bootargs=console=ttyS0,38400 root=/dev/nfs rw nfsroot=192.168.0.20:/export/rootfs ip=192.168.0.206:192.168.0.20:192.168.0.1:255.255.255.0:ax2000:eth0\0"
+
+#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SRAM
+#define CONFIG_EXTRA_ENV_SETTINGS_SELECT \
+ "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
+ "scratch=40200000\0" \
+ ""
+#elif CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM
+#define CONFIG_EXTRA_ENV_SETTINGS_SELECT \
+ "net_nfs=tftp 60000000 ${bootfile};run nfsargs addip;bootm\0" \
+ "scratch=60800000\0" \
+ ""
+#else
+/* More than 4Mb is assumed when running from SDRAM */
+#define CONFIG_EXTRA_ENV_SETTINGS_SELECT \
+ "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
+ "scratch=40800000\0" \
+ ""
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_SETTINGS_BASE CONFIG_EXTRA_ENV_SETTINGS_SELECT
+
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP 192.168.0.20
+#define CONFIG_IPADDR 192.168.0.206
+#define CONFIG_ROOTPATH /export/rootfs
+#define CONFIG_HOSTNAME ax2000
+#define CONFIG_BOOTFILE /uImage
+
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+/* Memory MAP
+ *
+ * Flash:
+ * |--------------------------------|
+ * | 0x00000000 Text & Data & BSS | *
+ * | for Monitor | *
+ * | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
+ * | UNUSED / Growth | * 256kb
+ * |--------------------------------|
+ * | 0x00050000 Base custom area | *
+ * | kernel / FS | *
+ * | | * Rest of Flash
+ * |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
+ * | END-0x00008000 Environment | * 32kb
+ * |--------------------------------|
+ *
+ *
+ *
+ * Main Memory (4Mb SRAM or XMb SDRAM):
+ * |--------------------------------|
+ * | UNUSED / scratch area |
+ * | |
+ * | |
+ * | |
+ * | |
+ * |--------------------------------|
+ * | Monitor .Text / .DATA / .BSS | * 256kb
+ * | Relocated! | *
+ * |--------------------------------|
+ * | Monitor Malloc | * 128kb (contains relocated environment)
+ * |--------------------------------|
+ * | Monitor/kernel STACK | * 64kb
+ * |--------------------------------|
+ * | Page Table for MMU systems | * 2k
+ * |--------------------------------|
+ * | PROM Code accessed from Linux | * 6kb-128b
+ * |--------------------------------|
+ * | Global data (avail from kernel)| * 128b
+ * |--------------------------------|
+ *
+ */
+
+/*
+ * Flash configuration (8,16 or 32 MB)
+ * TEXT base always at 0xFFF00000
+ * ENV_ADDR always at 0xFFF40000
+ * FLASH_BASE at 0xFC000000 for 64 MB
+ * 0xFE000000 for 32 MB
+ * 0xFF000000 for 16 MB
+ * 0xFF800000 for 8 MB
+ */
+/*#define CFG_NO_FLASH 1*/
+#define CFG_FLASH_BASE 0x00000000
+#define CFG_FLASH_SIZE 0x00800000
+
+#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors */
+#define CFG_MAX_FLASH_SECT 64 /* max num of sects on one chip */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
+
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
+#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+
+/*** CFI CONFIG ***/
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+/* Bypass cache when reading regs from flash memory */
+#define CFG_FLASH_CFI_BYPASS_READ
+/* Buffered writes (32byte/go) instead of single accesses */
+#define CFG_FLASH_USE_BUFFER_WRITE
+
+/*
+ * Environment settings
+ */
+/*#define CFG_ENV_IS_NOWHERE 1*/
+#define CFG_ENV_IS_IN_FLASH 1
+/* CFG_ENV_ADDR need to be at sector boundary */
+#define CFG_ENV_SIZE 0x8000
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_FLASH_SIZE-CFG_ENV_SECT_SIZE)
+#define CONFIG_ENV_OVERWRITE 1
+
+/*
+ * Memory map
+ *
+ * Always 4Mb SRAM available
+ * SDRAM module may be available on 0x60000000, SDRAM
+ * is configured as if a 128Mb SDRAM module is available.
+ */
+
+#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
+#define CFG_SDRAM_BASE 0x40000000
+#else
+#define CFG_SDRAM_BASE 0x60000000
+#endif
+
+#define CFG_SDRAM_SIZE 0x08000000
+#define CFG_SDRAM_END (CFG_SDRAM_BASE+CFG_SDRAM_SIZE)
+
+/* 4Mb SRAM available */
+#if CONFIG_LEON_RAM_SELECT != CONFIG_LEON_RAM_SDRAM_NOSRAM
+#define CFG_SRAM_BASE 0x40000000
+#define CFG_SRAM_SIZE 0x400000
+#define CFG_SRAM_END (CFG_SRAM_BASE+CFG_SRAM_SIZE)
+#endif
+
+/* Select RAM used to run U-BOOT from... */
+#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SRAM
+#define CFG_RAM_BASE CFG_SRAM_BASE
+#define CFG_RAM_SIZE CFG_SRAM_SIZE
+#define CFG_RAM_END CFG_SRAM_END
+#else
+#define CFG_RAM_BASE CFG_SDRAM_BASE
+#define CFG_RAM_SIZE CFG_SDRAM_SIZE
+#define CFG_RAM_END CFG_SDRAM_END
+#endif
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_RAM_END - CFG_GBL_DATA_SIZE)
+
+#define CFG_PROM_SIZE (8192-CFG_GBL_DATA_SIZE)
+#define CFG_PROM_OFFSET (CFG_GBL_DATA_OFFSET-CFG_PROM_SIZE)
+
+#define CFG_INIT_SP_OFFSET (CFG_PROM_OFFSET-32)
+#define CFG_STACK_SIZE (0x10000-32)
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+#define CFG_MALLOC_END (CFG_INIT_SP_OFFSET-CFG_STACK_SIZE)
+#define CFG_MALLOC_BASE (CFG_MALLOC_END-CFG_MALLOC_LEN)
+
+/* relocated monitor area */
+#define CFG_RELOC_MONITOR_MAX_END CFG_MALLOC_BASE
+#define CFG_RELOC_MONITOR_BASE (CFG_RELOC_MONITOR_MAX_END-CFG_MONITOR_LEN)
+
+/* make un relocated address from relocated address */
+#define UN_RELOC(address) (address-(CFG_RELOC_MONITOR_BASE-TEXT_BASE))
+
+/*
+ * Ethernet configuration uses on board SMC91C111
+ */
+#define CONFIG_DRIVER_SMC91111 1
+#define CONFIG_SMC91111_BASE 0x20000300 /* chip select 3 */
+#define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */
+#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */
+/*#define CONFIG_SHOW_ACTIVITY*/
+#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */
+
+#define CONFIG_ETHADDR 00:00:7a:cc:00:13
+#define CONFIG_PHY_ADDR 0x00
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK 0x0001BBBB
+#define CONFIG_USB_CONFIG 0x00005000
+
+/***** Gaisler GRLIB IP-Cores Config ********/
+
+/* AMBA Plug & Play info display on startup */
+/*#define CFG_AMBAPP_PRINT_ON_STARTUP*/
+
+#define CFG_GRLIB_SDRAM 0
+
+/* See, GRLIB Docs (grip.pdf) on how to set up
+ * These the memory controller registers.
+ */
+#define CFG_GRLIB_MEMCFG1 (0x10f800ff | (1<<11))
+#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
+#define CFG_GRLIB_MEMCFG2 0x82206000
+#else
+#define CFG_GRLIB_MEMCFG2 0x82205260
+#endif
+#define CFG_GRLIB_MEMCFG3 0x0809a000
+
+#define CFG_GRLIB_FT_MEMCFG1 (0x10f800ff | (1<<11))
+#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
+#define CFG_GRLIB_FT_MEMCFG2 0x82206000
+#else
+#define CFG_GRLIB_FT_MEMCFG2 0x82205260
+#endif
+#define CFG_GRLIB_FT_MEMCFG3 0x0809a000
+
+/* no DDR controller */
+#define CFG_GRLIB_DDR_CFG 0x00000000
+
+/* no DDR2 Controller */
+#define CFG_GRLIB_DDR2_CFG1 0x00000000
+#define CFG_GRLIB_DDR2_CFG3 0x00000000
+
+/* Calculate scaler register value from default baudrate */
+#define CFG_GRLIB_APBUART_SCALER \
+ ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
+
+/* Identification string */
+#define CONFIG_IDENT_STRING "GAISLER LEON3 GR-CPCI-AX2000"
+
+/* default kernel command line */
+#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
+
+#endif /* __CONFIG_H */
--- /dev/null
+/* Configuration header file for Gaisler Research AB's Template
+ * design (GPL Open Source SPARC/LEON3 96MHz) for Altera NIOS
+ * Development board Stratix II edition, with the FPGA device
+ * EP2S60.
+ *
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2008
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_LEON3 /* This is an LEON3 CPU */
+#define CONFIG_LEON 1 /* This is an LEON CPU */
+/* Altera NIOS Development board, Stratix II board */
+#define CONFIG_GR_EP2S60 1
+
+/* CPU / AMBA BUS configuration */
+#define CONFIG_SYS_CLK_FREQ 96000000 /* 96MHz */
+
+/* Number of SPARC register windows */
+#define CFG_SPARC_NWINDOWS 8
+
+/* Define this is the GR-2S60-MEZZ mezzanine is available and you
+ * want to use the USB and GRETH functionality of the board
+ */
+#undef GR_2S60_MEZZ
+
+#ifdef GR_2S60_MEZZ
+#define USE_GRETH 1
+#define USE_GRUSB 1
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_BAUDRATE 38400 /* ... at 38400 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/* Partitions */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/*
+ * Supported commands
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_AMBAPP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_IRQ
+
+/* USB support */
+#if USE_GRUSB
+#define CONFIG_USB_UHCI
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+/* Enable needed helper functions */
+#define CFG_DEVICE_DEREGISTER /* needs device_deregister */
+#endif
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs console=ttyS0,38400 root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
+ "scratch=40800000\0" \
+ "getkernel=tftpboot \$\(scratch\)\ \$\(bootfile\)\0" \
+ "bootargs=console=ttyS0,38400 root=/dev/nfs rw nfsroot=192.168.0.20:/export/rootfs ip=192.168.0.207:192.168.0.20:192.168.0.1:255.255.255.0:ml401:eth0\0" \
+ ""
+
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP 192.168.0.20
+#define CONFIG_IPADDR 192.168.0.207
+#define CONFIG_ROOTPATH /export/rootfs
+#define CONFIG_HOSTNAME ml401
+#define CONFIG_BOOTFILE /uImage
+
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+/* Memory MAP
+ *
+ * Flash:
+ * |--------------------------------|
+ * | 0x00000000 Text & Data & BSS | *
+ * | for Monitor | *
+ * | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
+ * | UNUSED / Growth | * 256kb
+ * |--------------------------------|
+ * | 0x00050000 Base custom area | *
+ * | kernel / FS | *
+ * | | * Rest of Flash
+ * |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
+ * | END-0x00008000 Environment | * 32kb
+ * |--------------------------------|
+ *
+ *
+ *
+ * Main Memory:
+ * |--------------------------------|
+ * | UNUSED / scratch area |
+ * | |
+ * | |
+ * | |
+ * | |
+ * |--------------------------------|
+ * | Monitor .Text / .DATA / .BSS | * 512kb
+ * | Relocated! | *
+ * |--------------------------------|
+ * | Monitor Malloc | * 128kb (contains relocated environment)
+ * |--------------------------------|
+ * | Monitor/kernel STACK | * 64kb
+ * |--------------------------------|
+ * | Page Table for MMU systems | * 2k
+ * |--------------------------------|
+ * | PROM Code accessed from Linux | * 6kb-128b
+ * |--------------------------------|
+ * | Global data (avail from kernel)| * 128b
+ * |--------------------------------|
+ *
+ */
+
+/*
+ * Flash configuration (8,16 or 32 MB)
+ * TEXT base always at 0xFFF00000
+ * ENV_ADDR always at 0xFFF40000
+ * FLASH_BASE at 0xFC000000 for 64 MB
+ * 0xFE000000 for 32 MB
+ * 0xFF000000 for 16 MB
+ * 0xFF800000 for 8 MB
+ */
+/*#define CFG_NO_FLASH 1*/
+#define CFG_FLASH_BASE 0x00000000
+#define CFG_FLASH_SIZE 0x00400000 /* FPGA Bit file is in top of FLASH, we only ues the bottom 4Mb */
+
+#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors */
+#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
+
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
+#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+
+/*** CFI CONFIG ***/
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+/* Bypass cache when reading regs from flash memory */
+#define CFG_FLASH_CFI_BYPASS_READ
+/* Buffered writes (32byte/go) instead of single accesses */
+#define CFG_FLASH_USE_BUFFER_WRITE
+
+/*
+ * Environment settings
+ */
+/*#define CFG_ENV_IS_NOWHERE 1*/
+#define CFG_ENV_IS_IN_FLASH 1
+/* CFG_ENV_ADDR need to be at sector boundary */
+#define CFG_ENV_SIZE 0x8000
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_FLASH_SIZE-CFG_ENV_SECT_SIZE)
+#define CONFIG_ENV_OVERWRITE 1
+
+/*
+ * Memory map
+ */
+#define CFG_SDRAM_BASE 0x40000000
+#define CFG_SDRAM_SIZE 0x02000000
+#define CFG_SDRAM_END (CFG_SDRAM_BASE+CFG_SDRAM_SIZE)
+
+/* no SRAM available */
+#undef CFG_SRAM_BASE
+#undef CFG_SRAM_SIZE
+
+#define CFG_RAM_BASE CFG_SDRAM_BASE
+#define CFG_RAM_SIZE CFG_SDRAM_SIZE
+#define CFG_RAM_END CFG_SDRAM_END
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_END - CFG_GBL_DATA_SIZE)
+
+#define CFG_PROM_SIZE (8192-CFG_GBL_DATA_SIZE)
+#define CFG_PROM_OFFSET (CFG_GBL_DATA_OFFSET-CFG_PROM_SIZE)
+
+#define CFG_INIT_SP_OFFSET (CFG_PROM_OFFSET-32)
+#define CFG_STACK_SIZE (0x10000-32)
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+#define CFG_MALLOC_END (CFG_INIT_SP_OFFSET-CFG_STACK_SIZE)
+#define CFG_MALLOC_BASE (CFG_MALLOC_END-CFG_MALLOC_LEN)
+
+/* relocated monitor area */
+#define CFG_RELOC_MONITOR_MAX_END CFG_MALLOC_BASE
+#define CFG_RELOC_MONITOR_BASE (CFG_RELOC_MONITOR_MAX_END-CFG_MONITOR_LEN)
+
+/* make un relocated address from relocated address */
+#define UN_RELOC(address) (address-(CFG_RELOC_MONITOR_BASE-TEXT_BASE))
+
+/*
+ * Ethernet configuration uses on board SMC91C111, however if a mezzanine
+ * with a PHY is attached the GRETH can be used on this board.
+ * Define USE_GRETH in order to use the mezzanine provided PHY with the
+ * onchip GRETH network MAC, note that this is not supported by the
+ * template design.
+ */
+#ifndef USE_GRETH
+
+/* USE SMC91C111 MAC */
+#define CONFIG_DRIVER_SMC91111 1
+#define CONFIG_SMC91111_BASE 0x20000300 /* chip select 3 */
+#define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */
+#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */
+/*#define CONFIG_SHOW_ACTIVITY*/
+#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */
+
+#else
+
+/* USE GRETH Ethernet Driver */
+#define CONFIG_NET_MULTI 1
+#define CONFIG_GRETH 1
+
+/* Default GRETH Ethernet HARDWARE address */
+#define GRETH_HWADDR_0 0x00
+#define GRETH_HWADDR_1 0x00
+#define GRETH_HWADDR_2 0x7a
+#define GRETH_HWADDR_3 0xcc
+#define GRETH_HWADDR_4 0x00
+#define GRETH_HWADDR_5 0x13
+#endif
+
+#define CONFIG_ETHADDR 00:00:7a:cc:00:13
+#define CONFIG_PHY_ADDR 0x00
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK 0x0001BBBB
+#define CONFIG_USB_CONFIG 0x00005000
+
+/***** Gaisler GRLIB IP-Cores Config ********/
+
+/* AMBA Plug & Play info display on startup */
+/*#define CFG_AMBAPP_PRINT_ON_STARTUP*/
+
+#define CFG_GRLIB_SDRAM 0
+
+/* See, GRLIB Docs (grip.pdf) on how to set up
+ * These the memory controller registers.
+ */
+#define CFG_GRLIB_MEMCFG1 (0x10f800ff | (1<<11))
+#define CFG_GRLIB_MEMCFG2 0x00000000
+#define CFG_GRLIB_MEMCFG3 0x00000000
+
+#define CFG_GRLIB_FT_MEMCFG1 (0x10f800ff | (1<<11))
+#define CFG_GRLIB_FT_MEMCFG2 0x00000000
+#define CFG_GRLIB_FT_MEMCFG3 0x00000000
+
+#define CFG_GRLIB_DDR_CFG 0xa900830a
+
+#define CFG_GRLIB_DDR2_CFG1 0x00000000
+#define CFG_GRLIB_DDR2_CFG3 0x00000000
+
+/* Calculate scaler register value from default baudrate */
+#define CFG_GRLIB_APBUART_SCALER \
+ ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
+
+/* Identification string */
+#define CONFIG_IDENT_STRING "GAISLER LEON3 EP2S60"
+
+/* default kernel command line */
+#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
+
+#endif /* __CONFIG_H */
--- /dev/null
+/* Configuration header file for Gaisler GR-XC3S-1500
+ * spartan board.
+ *
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_LEON3 /* This is an LEON3 CPU */
+#define CONFIG_LEON 1 /* This is an LEON CPU */
+#define CONFIG_GRXC3S1500 1 /* ... on GR-XC3S-1500 board */
+
+/* CPU / AMBA BUS configuration */
+#define CONFIG_SYS_CLK_FREQ 40000000 /* 40MHz */
+
+/* Number of SPARC register windows */
+#define CFG_SPARC_NWINDOWS 8
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_BAUDRATE 38400 /* ... at 38400 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/* Partitions */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/*
+ * Supported commands
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_AMBAPP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_IRQ
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs console=ttyS0,38400 root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
+ "scratch=40200000\0" \
+ "getkernel=tftpboot \$\(scratch\)\ \$\(bootfile\)\0" \
+ "bootargs=console=ttyS0,38400 root=/dev/nfs rw nfsroot=192.168.0.20:/export/rootfs ip=192.168.0.206:192.168.0.20:192.168.0.1:255.255.255.0:grxc3s1500_daniel:eth0\0" \
+ ""
+
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP 192.168.0.20
+#define CONFIG_IPADDR 192.168.0.206
+#define CONFIG_ROOTPATH /export/rootfs
+#define CONFIG_HOSTNAME grxc3s1500
+#define CONFIG_BOOTFILE /uImage
+
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+/* Memory MAP
+ *
+ * Flash:
+ * |--------------------------------|
+ * | 0x00000000 Text & Data & BSS | *
+ * | for Monitor | *
+ * | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
+ * | UNUSED / Growth | * 256kb
+ * |--------------------------------|
+ * | 0x00050000 Base custom area | *
+ * | kernel / FS | *
+ * | | * Rest of Flash
+ * |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
+ * | END-0x00008000 Environment | * 32kb
+ * |--------------------------------|
+ *
+ *
+ *
+ * Main Memory:
+ * |--------------------------------|
+ * | UNUSED / scratch area |
+ * | |
+ * | |
+ * | |
+ * | |
+ * |--------------------------------|
+ * | Monitor .Text / .DATA / .BSS | * 256kb
+ * | Relocated! | *
+ * |--------------------------------|
+ * | Monitor Malloc | * 128kb (contains relocated environment)
+ * |--------------------------------|
+ * | Monitor/kernel STACK | * 64kb
+ * |--------------------------------|
+ * | Page Table for MMU systems | * 2k
+ * |--------------------------------|
+ * | PROM Code accessed from Linux | * 6kb-128b
+ * |--------------------------------|
+ * | Global data (avail from kernel)| * 128b
+ * |--------------------------------|
+ *
+ */
+
+/*
+ * Flash configuration (8,16 or 32 MB)
+ * TEXT base always at 0xFFF00000
+ * ENV_ADDR always at 0xFFF40000
+ * FLASH_BASE at 0xFC000000 for 64 MB
+ * 0xFE000000 for 32 MB
+ * 0xFF000000 for 16 MB
+ * 0xFF800000 for 8 MB
+ */
+/*#define CFG_NO_FLASH 1*/
+#define CFG_FLASH_BASE 0x00000000
+#define CFG_FLASH_SIZE 0x00800000
+
+#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors */
+#define CFG_MAX_FLASH_SECT 64 /* max num of sects on one chip */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
+
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
+#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+
+/*** CFI CONFIG ***/
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+/* Bypass cache when reading regs from flash memory */
+#define CFG_FLASH_CFI_BYPASS_READ
+/* Buffered writes (32byte/go) instead of single accesses */
+#define CFG_FLASH_USE_BUFFER_WRITE
+
+/*
+ * Environment settings
+ */
+/*#define CFG_ENV_IS_NOWHERE 1*/
+#define CFG_ENV_IS_IN_FLASH 1
+/* CFG_ENV_ADDR need to be at sector boundary */
+#define CFG_ENV_SIZE 0x8000
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_FLASH_SIZE-CFG_ENV_SECT_SIZE)
+#define CONFIG_ENV_OVERWRITE 1
+
+/*
+ * Memory map
+ */
+#define CFG_SDRAM_BASE 0x40000000
+#define CFG_SDRAM_SIZE 0x4000000
+#define CFG_SDRAM_END (CFG_SDRAM_BASE+CFG_SDRAM_SIZE)
+
+/* no SRAM available */
+#undef CFG_SRAM_BASE
+#undef CFG_SRAM_SIZE
+
+/* Always Run U-Boot from SDRAM */
+#define CFG_RAM_BASE CFG_SDRAM_BASE
+#define CFG_RAM_SIZE CFG_SDRAM_SIZE
+#define CFG_RAM_END CFG_SDRAM_END
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_RAM_END - CFG_GBL_DATA_SIZE)
+
+#define CFG_PROM_SIZE (8192-CFG_GBL_DATA_SIZE)
+#define CFG_PROM_OFFSET (CFG_GBL_DATA_OFFSET-CFG_PROM_SIZE)
+
+#define CFG_INIT_SP_OFFSET (CFG_PROM_OFFSET-32)
+#define CFG_STACK_SIZE (0x10000-32)
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+#define CFG_MALLOC_END (CFG_INIT_SP_OFFSET-CFG_STACK_SIZE)
+#define CFG_MALLOC_BASE (CFG_MALLOC_END-CFG_MALLOC_LEN)
+
+/* relocated monitor area */
+#define CFG_RELOC_MONITOR_MAX_END CFG_MALLOC_BASE
+#define CFG_RELOC_MONITOR_BASE (CFG_RELOC_MONITOR_MAX_END-CFG_MONITOR_LEN)
+
+/* make un relocated address from relocated address */
+#define UN_RELOC(address) (address-(CFG_RELOC_MONITOR_BASE-TEXT_BASE))
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_GRETH 1
+#define CONFIG_NET_MULTI 1
+
+/* Default GRETH Ethernet HARDWARE address */
+#define GRETH_HWADDR_0 0x00
+#define GRETH_HWADDR_1 0x00
+#define GRETH_HWADDR_2 0x7a
+#define GRETH_HWADDR_3 0xcc
+#define GRETH_HWADDR_4 0x00
+#define GRETH_HWADDR_5 0x12
+
+#define CONFIG_ETHADDR 00:00:7a:cc:00:12
+#define CONFIG_PHY_ADDR 0x00
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK 0x0001BBBB
+#define CONFIG_USB_CONFIG 0x00005000
+
+/***** Gaisler GRLIB IP-Cores Config ********/
+
+/* AMBA Plug & Play info display on startup */
+/*#define CFG_AMBAPP_PRINT_ON_STARTUP*/
+
+#define CFG_GRLIB_SDRAM 0
+
+/* See, GRLIB Docs (grip.pdf) on how to set up
+ * These the memory controller registers.
+ */
+#define CFG_GRLIB_MEMCFG1 (0x000000ff | (1<<11))
+#define CFG_GRLIB_MEMCFG2 0x82206000
+#define CFG_GRLIB_MEMCFG3 0x00136000
+
+#define CFG_GRLIB_FT_MEMCFG1 (0x000000ff | (1<<11))
+#define CFG_GRLIB_FT_MEMCFG2 0x82206000
+#define CFG_GRLIB_FT_MEMCFG3 0x00136000
+
+/* no DDR controller */
+#define CFG_GRLIB_DDR_CFG 0x00000000
+
+/* no DDR2 Controller */
+#define CFG_GRLIB_DDR2_CFG1 0x00000000
+#define CFG_GRLIB_DDR2_CFG3 0x00000000
+
+/* Calculate scaler register value from default baudrate */
+#define CFG_GRLIB_APBUART_SCALER \
+ ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
+
+/* Identification string */
+#define CONFIG_IDENT_STRING "GAISLER LEON3 GR-XC3S-1500"
+
+/* default kernel command line */
+#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
+
+#endif /* __CONFIG_H */
--- /dev/null
+/* Configuration header file for LEON3 GRSIM, trying to be similar
+ * to Gaisler's GR-XC3S-1500 board.
+ *
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ *
+ * Select between TSIM or GRSIM by setting CONFIG_GRSIM or CONFIG_TSIM to 1.
+ *
+ * TSIM command
+ * tsim-leon3 -sdram 0 -ram 32000 -rom 8192 -mmu
+ *
+ */
+
+#define CONFIG_LEON3 /* This is an LEON3 CPU */
+#define CONFIG_LEON 1 /* This is an LEON CPU */
+#define CONFIG_GRSIM 0 /* ... not running on GRSIM */
+#define CONFIG_TSIM 1 /* ... running on TSIM */
+
+/* CPU / AMBA BUS configuration */
+#define CONFIG_SYS_CLK_FREQ 40000000 /* 40MHz */
+
+/* Number of SPARC register windows */
+#define CFG_SPARC_NWINDOWS 8
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_BAUDRATE 38400 /* ... at 38400 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/* Partitions */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/*
+ * Supported commands
+ */
+#define CONFIG_CMD_AMBAPP /* AMBA Plyg&Play information */
+#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
+#define CONFIG_CMD_BDI /* bdinfo */
+#define CONFIG_CMD_CONSOLE /* coninfo */
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ECHO /* echo arguments */
+#define CONFIG_CMD_FPGA /* FPGA configuration Support */
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ITEST /* Integer (and string) test */
+#define CONFIG_CMD_LOADB /* loadb */
+#define CONFIG_CMD_LOADS /* loads */
+#define CONFIG_CMD_MISC /* Misc functions like sleep etc */
+#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_RUN /* run command in env variable */
+#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
+#define CONFIG_CMD_XIMG /* Load part of Multi Image */
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+/*#define CFG_HUSH_PARSER 0*/
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
+ "rootpath=/export/roofs\0" \
+ "scratch=40000000\0" \
+ "getkernel=tftpboot \$\(scratch\)\ \$\(bootfile\)\0" \
+ "ethaddr=00:00:7A:CC:00:12\0" \
+ "bootargs=console=ttyS0,38400" \
+ ""
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP 192.168.0.81
+#define CONFIG_IPADDR 192.168.0.80
+#define CONFIG_ROOTPATH /export/rootfs
+#define CONFIG_HOSTNAME grxc3s1500
+#define CONFIG_BOOTFILE /uImage
+
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+/* Memory MAP
+ *
+ * Flash:
+ * |--------------------------------|
+ * | 0x00000000 Text & Data & BSS | *
+ * | for Monitor | *
+ * | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
+ * | UNUSED / Growth | * 256kb
+ * |--------------------------------|
+ * | 0x00050000 Base custom area | *
+ * | kernel / FS | *
+ * | | * Rest of Flash
+ * |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
+ * | END-0x00008000 Environment | * 32kb
+ * |--------------------------------|
+ *
+ *
+ *
+ * Main Memory:
+ * |--------------------------------|
+ * | UNUSED / scratch area |
+ * | |
+ * | |
+ * | |
+ * | |
+ * |--------------------------------|
+ * | Monitor .Text / .DATA / .BSS | * 256kb
+ * | Relocated! | *
+ * |--------------------------------|
+ * | Monitor Malloc | * 128kb (contains relocated environment)
+ * |--------------------------------|
+ * | Monitor/kernel STACK | * 64kb
+ * |--------------------------------|
+ * | Page Table for MMU systems | * 2k
+ * |--------------------------------|
+ * | PROM Code accessed from Linux | * 6kb-128b
+ * |--------------------------------|
+ * | Global data (avail from kernel)| * 128b
+ * |--------------------------------|
+ *
+ */
+
+/*
+ * Flash configuration (8,16 or 32 MB)
+ * TEXT base always at 0xFFF00000
+ * ENV_ADDR always at 0xFFF40000
+ * FLASH_BASE at 0xFC000000 for 64 MB
+ * 0xFE000000 for 32 MB
+ * 0xFF000000 for 16 MB
+ * 0xFF800000 for 8 MB
+ */
+#define CFG_NO_FLASH 1
+#define CFG_FLASH_BASE 0x00000000
+#define CFG_FLASH_SIZE 0x00800000
+#define CFG_ENV_SIZE 0x8000
+
+#define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_FLASH_SIZE-CFG_ENV_SIZE)
+
+#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors */
+#define CFG_MAX_FLASH_SECT 64 /* max num of sects on one chip */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
+
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
+
+#ifdef ENABLE_FLASH_SUPPORT
+/* For use with grsim FLASH emulation extension */
+#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+
+#undef CONFIG_FLASH_8BIT /* Flash is 32-bit */
+
+/*** CFI CONFIG ***/
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#endif
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_NOWHERE 1
+/*#define CFG_ENV_IS_IN_FLASH 0*/
+/*#define CFG_ENV_SIZE 0x8000*/
+#define CFG_ENV_SECT_SIZE 0x40000
+#define CONFIG_ENV_OVERWRITE 1
+
+/*
+ * Memory map
+ */
+#define CFG_SDRAM_BASE 0x40000000
+#define CFG_SDRAM_SIZE 0x02000000
+#define CFG_SDRAM_END (CFG_SDRAM_BASE+CFG_SDRAM_SIZE)
+
+/* no SRAM available */
+#undef CFG_SRAM_BASE
+#undef CFG_SRAM_SIZE
+
+/* Always Run U-Boot from SDRAM */
+#define CFG_RAM_BASE CFG_SDRAM_BASE
+#define CFG_RAM_SIZE CFG_SDRAM_SIZE
+#define CFG_RAM_END CFG_SDRAM_END
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_RAM_END - CFG_GBL_DATA_SIZE)
+
+#define CFG_PROM_SIZE (8192-CFG_GBL_DATA_SIZE)
+#define CFG_PROM_OFFSET (CFG_GBL_DATA_OFFSET-CFG_PROM_SIZE)
+
+#define CFG_INIT_SP_OFFSET (CFG_PROM_OFFSET-32)
+#define CFG_STACK_SIZE (0x10000-32)
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+#define CFG_MALLOC_END (CFG_INIT_SP_OFFSET-CFG_STACK_SIZE)
+#define CFG_MALLOC_BASE (CFG_MALLOC_END-CFG_MALLOC_LEN)
+
+/* relocated monitor area */
+#define CFG_RELOC_MONITOR_MAX_END CFG_MALLOC_BASE
+#define CFG_RELOC_MONITOR_BASE (CFG_RELOC_MONITOR_MAX_END-CFG_MONITOR_LEN)
+
+/* make un relocated address from relocated address */
+#define UN_RELOC(address) (address-(CFG_RELOC_MONITOR_BASE-TEXT_BASE))
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_GRETH 1
+#define CONFIG_NET_MULTI 1
+
+/* Default HARDWARE address */
+#define GRETH_HWADDR_0 0x00
+#define GRETH_HWADDR_1 0x00
+#define GRETH_HWADDR_2 0x7A
+#define GRETH_HWADDR_3 0xcc
+#define GRETH_HWADDR_4 0x00
+#define GRETH_HWADDR_5 0x12
+
+#define CONFIG_ETHADDR 00:00:7a:cc:00:12
+
+/*
+ * Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s
+ */
+/* #define CONFIG_GRETH_10MBIT 1 */
+#define CONFIG_PHY_ADDR 0x00
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/***** Gaisler GRLIB IP-Cores Config ********/
+
+/* AMBA Plug & Play info display on startup */
+/*#define CFG_AMBAPP_PRINT_ON_STARTUP*/
+
+#define CFG_GRLIB_SDRAM 0
+#define CFG_GRLIB_MEMCFG1 (0x000000ff | (1<<11))
+#if CONFIG_GRSIM
+/* GRSIM configuration */
+#define CFG_GRLIB_MEMCFG2 0x82206000
+#else
+/* TSIM configuration */
+#define CFG_GRLIB_MEMCFG2 0x00001820
+#endif
+#define CFG_GRLIB_MEMCFG3 0x00136000
+
+#define CFG_GRLIB_FT_MEMCFG1 (0x000000ff | (1<<11))
+#define CFG_GRLIB_FT_MEMCFG2 0x82206000
+#define CFG_GRLIB_FT_MEMCFG3 0x00136000
+
+/* no DDR controller */
+#define CFG_GRLIB_DDR_CFG 0x00000000
+
+/* no DDR2 Controller */
+#define CFG_GRLIB_DDR2_CFG1 0x00000000
+#define CFG_GRLIB_DDR2_CFG3 0x00000000
+
+#define CFG_GRLIB_APBUART_SCALER \
+ ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
+
+/* default kernel command line */
+#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
+
+#define CONFIG_IDENT_STRING "Gaisler GRSIM"
+
+#endif /* __CONFIG_H */
--- /dev/null
+/* Configuration header file for LEON2 GRSIM.
+ *
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ *
+ * Select between TSIM or GRSIM by setting CONFIG_GRSIM or CONFIG_TSIM to 1.
+ *
+ * TSIM command
+ * tsim-leon -sdram 0 -ram 32000 -rom 8192 -mmu
+ *
+ */
+
+#define CONFIG_LEON2 /* This is an LEON2 CPU */
+#define CONFIG_LEON 1 /* This is an LEON CPU */
+#define CONFIG_GRSIM 0 /* ... not running on GRSIM */
+#define CONFIG_TSIM 1 /* ... running on TSIM */
+
+/* CPU / AMBA BUS configuration */
+#define CONFIG_SYS_CLK_FREQ 40000000 /* 40MHz */
+
+/* Number of SPARC register windows */
+#define CFG_SPARC_NWINDOWS 8
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_BAUDRATE 38400 /* ... at 38400 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/* Partitions */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/*
+ * Supported commands
+ */
+#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
+#define CONFIG_CMD_BDI /* bdinfo */
+#define CONFIG_CMD_CONSOLE /* coninfo */
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ECHO /* echo arguments */
+#define CONFIG_CMD_FPGA /* FPGA configuration Support */
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ITEST /* Integer (and string) test */
+#define CONFIG_CMD_LOADB /* loadb */
+#define CONFIG_CMD_LOADS /* loads */
+#define CONFIG_CMD_MISC /* Misc functions like sleep etc */
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_RUN /* run command in env variable */
+#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
+#define CONFIG_CMD_XIMG /* Load part of Multi Image */
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+/*#define CFG_HUSH_PARSER 0*/
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
+ "rootpath=/export/roofs\0" \
+ "scratch=40000000\0" \
+ "getkernel=tftpboot \$\(scratch\)\ \$\(bootfile\)\0" \
+ "ethaddr=00:00:7A:CC:00:12\0" \
+ "bootargs=console=ttyS0,38400" \
+ ""
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP 192.168.0.81
+#define CONFIG_IPADDR 192.168.0.80
+#define CONFIG_ROOTPATH /export/rootfs
+#define CONFIG_HOSTNAME grxc3s1500
+#define CONFIG_BOOTFILE /uImage
+
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+/* Memory MAP
+ *
+ * Flash:
+ * |--------------------------------|
+ * | 0x00000000 Text & Data & BSS | *
+ * | for Monitor | *
+ * | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
+ * | UNUSED / Growth | * 256kb
+ * |--------------------------------|
+ * | 0x00050000 Base custom area | *
+ * | kernel / FS | *
+ * | | * Rest of Flash
+ * |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
+ * | END-0x00008000 Environment | * 32kb
+ * |--------------------------------|
+ *
+ *
+ *
+ * Main Memory:
+ * |--------------------------------|
+ * | UNUSED / scratch area |
+ * | |
+ * | |
+ * | |
+ * | |
+ * |--------------------------------|
+ * | Monitor .Text / .DATA / .BSS | * 256kb
+ * | Relocated! | *
+ * |--------------------------------|
+ * | Monitor Malloc | * 128kb (contains relocated environment)
+ * |--------------------------------|
+ * | Monitor/kernel STACK | * 64kb
+ * |--------------------------------|
+ * | Page Table for MMU systems | * 2k
+ * |--------------------------------|
+ * | PROM Code accessed from Linux | * 6kb-128b
+ * |--------------------------------|
+ * | Global data (avail from kernel)| * 128b
+ * |--------------------------------|
+ *
+ */
+
+/*
+ * Flash configuration (8,16 or 32 MB)
+ * TEXT base always at 0xFFF00000
+ * ENV_ADDR always at 0xFFF40000
+ * FLASH_BASE at 0xFC000000 for 64 MB
+ * 0xFE000000 for 32 MB
+ * 0xFF000000 for 16 MB
+ * 0xFF800000 for 8 MB
+ */
+#define CFG_NO_FLASH 1
+#define CFG_FLASH_BASE 0x00000000
+#define CFG_FLASH_SIZE 0x00800000
+#define CFG_ENV_SIZE 0x8000
+
+#define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_FLASH_SIZE-CFG_ENV_SIZE)
+
+#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors */
+#define CFG_MAX_FLASH_SECT 64 /* max num of sects on one chip */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
+
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
+
+#ifdef ENABLE_FLASH_SUPPORT
+/* For use with grsim FLASH emulation extension */
+#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
+
+#undef CONFIG_FLASH_8BIT /* Flash is 32-bit */
+
+/*** CFI CONFIG ***/
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#endif
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_NOWHERE 1
+/*#define CFG_ENV_IS_IN_FLASH 0*/
+/*#define CFG_ENV_SIZE 0x8000*/
+#define CFG_ENV_SECT_SIZE 0x40000
+#define CONFIG_ENV_OVERWRITE 1
+
+/*
+ * Memory map
+ */
+#define CFG_SDRAM_BASE 0x40000000
+#define CFG_SDRAM_SIZE 0x00800000
+#define CFG_SDRAM_END (CFG_SDRAM_BASE+CFG_SDRAM_SIZE)
+
+/* no SRAM available */
+#undef CFG_SRAM_BASE
+#undef CFG_SRAM_SIZE
+
+
+/* Always Run U-Boot from SDRAM */
+#define CFG_RAM_BASE CFG_SDRAM_BASE
+#define CFG_RAM_SIZE CFG_SDRAM_SIZE
+#define CFG_RAM_END CFG_SDRAM_END
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_RAM_END - CFG_GBL_DATA_SIZE)
+
+#define CFG_PROM_SIZE (8192-CFG_GBL_DATA_SIZE)
+#define CFG_PROM_OFFSET (CFG_GBL_DATA_OFFSET-CFG_PROM_SIZE)
+
+#define CFG_INIT_SP_OFFSET (CFG_PROM_OFFSET-32)
+#define CFG_STACK_SIZE (0x10000-32)
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+#define CFG_MALLOC_END (CFG_INIT_SP_OFFSET-CFG_STACK_SIZE)
+#define CFG_MALLOC_BASE (CFG_MALLOC_END-CFG_MALLOC_LEN)
+
+/* relocated monitor area */
+#define CFG_RELOC_MONITOR_MAX_END CFG_MALLOC_BASE
+#define CFG_RELOC_MONITOR_BASE (CFG_RELOC_MONITOR_MAX_END-CFG_MONITOR_LEN)
+
+/* make un relocated address from relocated address */
+#define UN_RELOC(address) (address-(CFG_RELOC_MONITOR_BASE-TEXT_BASE))
+
+/*
+ * Ethernet configuration
+ */
+/*#define CONFIG_GRETH 1*/
+/*#define CONFIG_NET_MULTI 1*/
+
+/* Default HARDWARE address */
+#define GRETH_HWADDR_0 0x00
+#define GRETH_HWADDR_1 0x00
+#define GRETH_HWADDR_2 0x7A
+#define GRETH_HWADDR_3 0xcc
+#define GRETH_HWADDR_4 0x00
+#define GRETH_HWADDR_5 0x12
+
+#define CONFIG_ETHADDR 00:00:7a:cc:00:12
+
+/*
+ * Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s
+ */
+/* #define CONFIG_GRETH_10MBIT 1 */
+#define CONFIG_PHY_ADDR 0x00
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/***** Gaisler GRLIB IP-Cores Config ********/
+
+#define CFG_GRLIB_SDRAM 0
+#define CFG_GRLIB_MEMCFG1 (0x000000ff | (1<<11))
+#if CONFIG_GRSIM
+#define CFG_GRLIB_MEMCFG2 0x82206000
+#else
+#define CFG_GRLIB_MEMCFG2 0x00001820
+#endif
+#define CFG_GRLIB_MEMCFG3 0x00136000
+
+/*** LEON2 UART 1 ***/
+#define CFG_LEON2_UART1_SCALER \
+ ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
+
+/* UART1 Define to 1 or 0 */
+#define LEON2_UART1_LOOPBACK_ENABLE 0
+#define LEON2_UART1_FLOWCTRL_ENABLE 0
+#define LEON2_UART1_PARITY_ENABLE 0
+#define LEON2_UART1_ODDPAR_ENABLE 0
+
+/*** LEON2 UART 2 ***/
+
+#define CFG_LEON2_UART2_SCALER \
+ ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
+
+/* UART2 Define to 1 or 0 */
+#define LEON2_UART2_LOOPBACK_ENABLE 0
+#define LEON2_UART2_FLOWCTRL_ENABLE 0
+#define LEON2_UART2_PARITY_ENABLE 0
+#define LEON2_UART2_ODDPAR_ENABLE 0
+
+#define LEON_CONSOLE_UART1 1
+#define LEON_CONSOLE_UART2 2
+
+/* Use UART2 as console */
+#define LEON2_CONSOLE_SELECT LEON_CONSOLE_UART1
+
+/* LEON2 I/O Port */
+/*#define LEON2_IO_PORT_DIR 0x0000aa00*/
+
+/* default kernel command line */
+#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
+
+#define CONFIG_IDENT_STRING "Gaisler GRSIM LEON2"
+
+#endif /* __CONFIG_H */
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
- "net_nfs=tftp 200000 ${bootfile};" \
- "run nfsargs addip addtty;" \
- "bootm 200000\0" \
- "net_nfs_fdt=tftp 200000 ${bootfile};" \
- "tftp ${fdt_addr} ${fdt_file};" \
- "run nfsargs addip addtty;" \
- "bootm 200000 - ${fdt_addr}\0" \
- "flash_nfs=run nfsargs addip addtty;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip addtty;" \
+ "flash_self_old=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
+ "flash_nfs_old=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr} - ${fdt_addr}\0" \
+ "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \
+ "run nfsargs addip addtty;bootm ${kernel_addr_r}\0" \
+ "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
+ "tftp ${fdt_addr_r} ${fdt_file}; " \
+ "run nfsargs addip addtty;" \
+ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=kilauea/uImage\0" \
"fdt_file=kilauea/kilauea.dtb\0" \
- "fdt_addr=400000\0" \
+ "kernel_addr_r=400000\0" \
+ "fdt_addr_r=800000\0" \
"kernel_addr=fc000000\0" \
+ "fdt_addr=fc1e0000\0" \
"ramdisk_addr=fc200000\0" \
"initrd_high=30000000\0" \
"load=tftp 200000 kilauea/u-boot.bin\0" \
/*
- * (C) Copyright 2007 Michal Simek
+ * (C) Copyright 2007-2008 Michal Simek
*
* Michal SIMEK <monstr@monstr.eu>
*
#define CONFIG_ML401 1 /* ML401 Board */
/* uart */
+#ifdef XILINX_UARTLITE_BASEADDR
#define CONFIG_XILINX_UARTLITE
-#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR
-#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE
+#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
+#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
+#else
+#ifdef XILINX_UART16550_BASEADDR
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 4
+#define CONFIG_CONS_INDEX 1
+#define CFG_NS16550_COM1 XILINX_UART16550_BASEADDR
+#define CFG_NS16550_CLK XILINX_UART16550_CLOCK_HZ
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600, 115200 }
+#endif
+#endif
/* setting reset address */
/*#define CFG_RESET_ADDRESS TEXT_BASE*/
/* ethernet */
-#define CONFIG_EMACLITE 1
-#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
+#ifdef XILINX_EMAC_BASEADDR
+#define CONFIG_XILINX_EMAC 1
+#else
+#ifdef XILINX_EMACLITE_BASEADDR
+#define CONFIG_XILINX_EMACLITE 1
+#endif
+#endif
+#undef ET_DEBUG
/* gpio */
+#ifdef XILINX_GPIO_BASEADDR
#define CFG_GPIO_0 1
#define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR
+#endif
/* interrupt controller */
#define CFG_INTC_0 1
#define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
/* FSL */
-#define CFG_FSL_2
-#define FSL_INTR_2 1
+/* #define CFG_FSL_2 */
+/* #define FSL_INTR_2 1 */
/*
* memory layout - Example
#else /* !RAMENV */
#define CFG_ENV_IS_IN_FLASH 1
- #define CFG_ENV_ADDR 0x40000
#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
- #define CFG_ENV_SIZE 0x2000
+ #define CFG_ENV_ADDR (CFG_FLASH_BASE + (2 * CFG_ENV_SECT_SIZE))
+ #define CFG_ENV_SIZE 0x40000
#endif /* !RAMBOOT */
#else /* !FLASH */
/* ENV in RAM */
"256k(u-boot),256k(env),3m(kernel),"\
"1m(romfs),1m(cramfs),-(jffs2)\0"
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_OF_LIBFDT 1
+
#endif /* __CONFIG_H */
/*
- * (C) Copyright 2007 Michal Simek
+ * (C) Copyright 2007-2008 Michal Simek
*
* Michal SIMEK <monstr@monstr.eu>
*
#define CONFIG_XUPV2P 1
/* uart */
+#ifdef XILINX_UARTLITE_BASEADDR
#define CONFIG_XILINX_UARTLITE
-#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR
-#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE
+#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
+#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
-
-/* ethernet */
-#define CONFIG_EMAC 1
-#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES
+#else
+#ifdef XILINX_UART16550_BASEADDR
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 4
+#define CONFIG_CONS_INDEX 1
+#define CFG_NS16550_COM1 XILINX_UART16550_BASEADDR
+#define CFG_NS16550_CLK XILINX_UART16550_CLOCK_HZ
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600, 115200 }
+#endif
+#endif
/*
* setting reset address
*/
/* #define CFG_RESET_ADDRESS 0x36000000 */
+/* ethernet */
+#ifdef XILINX_EMAC_BASEADDR
+#define CONFIG_XILINX_EMAC 1
+#else
+#ifdef XILINX_EMACLITE_BASEADDR
+#define CONFIG_XILINX_EMACLITE 1
+#endif
+#endif
+#undef ET_DEBUG
+
/* gpio */
#ifdef XILINX_GPIO_BASEADDR
#define CFG_GPIO_0 1
#include <config_cmd_default.h>
#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_JFFS2
#undef CONFIG_CMD_IMLS
#define CONFIG_CMD_ASKENV
#define CONFIG_DOS_PARTITION
#endif
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_OF_LIBFDT 1 /* flat device tree */
+
#endif /* __CONFIG_H */
if (!image_check_arch (hdr, IH_ARCH_PPC))
#elif defined(__sh__)
if (!image_check_arch (hdr, IH_ARCH_SH))
+#elif defined(__sparc__)
+ if (!image_check_arch (hdr, IH_ARCH_SPARC))
#else
# error Unknown CPU type
#endif
if (!fit_image_check_arch (fdt, node, IH_ARCH_PPC))
#elif defined(__sh__)
if (!fit_image_check_arch (fdt, node, IH_ARCH_SH))
+#elif defined(__sparc__)
+ if (!fit_image_check_arch (fdt, node, IH_ARCH_SPARC))
#else
# error Unknown CPU type
#endif
#else
#define CNTRL_DCR_BASE 0x0b0
#endif
-#if defined(CONFIG_440GX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
+
#define cpc0_er (CNTRL_DCR_BASE+0x00) /* CPM enable register */
#define cpc0_fr (CNTRL_DCR_BASE+0x01) /* CPM force register */
#define cpc0_sr (CNTRL_DCR_BASE+0x02) /* CPM status register */
-#else
-#define cpc0_sr (CNTRL_DCR_BASE+0x00) /* CPM status register */
-#define cpc0_er (CNTRL_DCR_BASE+0x01) /* CPM enable register */
-#define cpc0_fr (CNTRL_DCR_BASE+0x02) /* CPM force register */
-#endif
#define cpc0_sys0 (CNTRL_DCR_BASE+0x30) /* System configuration reg 0 */
#define cpc0_sys1 (CNTRL_DCR_BASE+0x31) /* System configuration reg 1 */
* - monitor code
* - board info struct
*/
- len = (ulong)&_end - (ulong)&_start + EXC_OFF_SYS_RESET;
+ len = (ulong)&_end - CFG_MONITOR_BASE;
/*
* Subtract specified amount of memory to hide so that it won't
--- /dev/null
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(ARCH).a
+
+SOBJS =
+
+COBJS = board.o cache.o interrupts.o time.o bootm.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/* SPARC Board initialization
+ *
+ * (C) Copyright 2000-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <devices.h>
+#include <config.h>
+#if defined(CONFIG_CMD_IDE)
+#include <ide.h>
+#endif
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#endif
+#include <net.h>
+#include <serial.h>
+#include <version.h>
+#if defined(CONFIG_POST)
+#include <post.h>
+#endif
+#ifdef CONFIG_PS2KBD
+#include <keyboard.h>
+#endif
+#ifdef CONFIG_CMD_AMBAPP
+#include <ambapp.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Debug options
+#define DEBUG_INIT_SEQUENCE
+#define DEBUG_MEM_LAYOUT
+#define DEBUG_COMMANDS
+*/
+
+extern void timer_interrupt_init(void);
+extern void malloc_bin_reloc(void);
+extern int do_ambapp_print(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]);
+extern int prom_init(void);
+
+#if defined(CONFIG__CMD_DOC)
+void doc_init(void);
+#endif
+
+#if !defined(CFG_NO_FLASH)
+static char *failed = "*** failed ***\n";
+#endif
+
+#include <environment.h>
+
+ulong monitor_flash_len;
+
+/*
+ * Begin and End of memory area for malloc(), and current "brk"
+ */
+static ulong mem_malloc_start = 0;
+static ulong mem_malloc_end = 0;
+static ulong mem_malloc_brk = 0;
+
+/************************************************************************
+ * Utilities *
+ ************************************************************************
+ */
+
+/*
+ * The Malloc area is immediately below the monitor copy in RAM
+ */
+static void mem_malloc_init(void)
+{
+ mem_malloc_start = CFG_MALLOC_BASE;
+ mem_malloc_end = CFG_MALLOC_END;
+ mem_malloc_brk = mem_malloc_start;
+ memset((void *)mem_malloc_start, 0, mem_malloc_end - mem_malloc_start);
+}
+
+void *sbrk(ptrdiff_t increment)
+{
+ ulong old = mem_malloc_brk;
+ ulong new = old + increment;
+
+ if ((new < mem_malloc_start) || (new > mem_malloc_end)) {
+ return (NULL);
+ }
+ mem_malloc_brk = new;
+ return ((void *)old);
+}
+
+/***********************************************************************/
+
+/************************************************************************
+ * Init Utilities *
+ ************************************************************************
+ * Some of this code should be moved into the core functions,
+ * but let's get it working (again) first...
+ */
+
+static int init_baudrate(void)
+{
+ char tmp[64]; /* long enough for environment variables */
+ int i = getenv_r("baudrate", tmp, sizeof(tmp));
+
+ gd->baudrate = (i > 0)
+ ? (int)simple_strtoul(tmp, NULL, 10)
+ : CONFIG_BAUDRATE;
+ return (0);
+}
+
+/***********************************************************************/
+
+/*
+ * All attempts to come up with a "common" initialization sequence
+ * that works for all boards and architectures failed: some of the
+ * requirements are just _too_ different. To get rid of the resulting
+ * mess of board dependend #ifdef'ed code we now make the whole
+ * initialization sequence configurable to the user.
+ *
+ * The requirements for any new initalization function is simple: it
+ * receives a pointer to the "global data" structure as it's only
+ * argument, and returns an integer return code, where 0 means
+ * "continue" and != 0 means "fatal error, hang the system".
+ */
+typedef int (init_fnc_t) (void);
+
+#define WATCHDOG_RESET(x)
+
+/************************************************************************
+ * Initialization sequence *
+ ************************************************************************
+ */
+
+init_fnc_t *init_sequence[] = {
+
+#if defined(CONFIG_BOARD_EARLY_INIT_F)
+ board_early_init_f,
+#endif
+ serial_init,
+
+ init_timebase,
+
+#if defined(CONFIG_CMD_AMBAPP)
+ ambapp_init_reloc,
+#endif
+
+ env_init,
+
+ init_baudrate,
+
+ console_init_f,
+ display_options,
+
+ checkcpu,
+ checkboard,
+#if defined(CONFIG_MISC_INIT_F)
+ misc_init_f,
+#endif
+
+#ifdef CONFIG_POST
+ post_init_f,
+#endif
+
+ NULL, /* Terminate this list,
+ * beware: this list will be relocated
+ * which means that NULL will become
+ * NULL+RELOC_OFFSET. We simply make
+ * NULL be -RELOC_OFFSET instead.
+ */
+};
+
+/************************************************************************
+ *
+ * This is the SPARC board initialization routine, running from RAM.
+ *
+ ************************************************************************
+ */
+#ifdef DEBUG_INIT_SEQUENCE
+char *str_init_seq = "INIT_SEQ 00\n";
+char *str_init_seq_done = "\n\rInit sequence done...\r\n\r\n";
+#endif
+
+void board_init_f(ulong bootflag)
+{
+ cmd_tbl_t *cmdtp;
+ bd_t *bd;
+ unsigned char *s;
+ init_fnc_t **init_fnc_ptr;
+ int j;
+ int i;
+ char *e;
+
+#ifndef CFG_NO_FLASH
+ ulong flash_size;
+#endif
+
+ gd = (gd_t *) (CFG_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ memset((void *)gd, 0, sizeof(gd_t));
+
+ gd->bd = (bd_t *) (gd + 1); /* At end of global data */
+ gd->baudrate = CONFIG_BAUDRATE;
+ gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
+
+ bd = gd->bd;
+ bd->bi_memstart = CFG_RAM_BASE;
+ bd->bi_memsize = CFG_RAM_SIZE;
+ bd->bi_flashstart = CFG_FLASH_BASE;
+#if defined(CFG_SRAM_BASE) && defined(CFG_SRAM_SIZE)
+ bd->bi_sramstart = CFG_SRAM_BASE;
+ bd->bi_sramsize = CFG_SRAM_SIZE;
+#endif
+ bd->bi_baudrate = CONFIG_BAUDRATE;
+ bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
+
+ gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
+ gd->reloc_off = CFG_RELOC_MONITOR_BASE - CFG_MONITOR_BASE;
+
+ for (init_fnc_ptr = init_sequence, j = 0; *init_fnc_ptr;
+ ++init_fnc_ptr, j++) {
+#ifdef DEBUG_INIT_SEQUENCE
+ if (j > 9)
+ str_init_seq[9] = '0' + (j / 10);
+ str_init_seq[10] = '0' + (j - (j / 10) * 10);
+ serial_puts(str_init_seq);
+#endif
+ if ((*init_fnc_ptr + gd->reloc_off) () != 0) {
+ hang();
+ }
+ }
+#ifdef DEBUG_INIT_SEQUENCE
+ serial_puts(str_init_seq_done);
+#endif
+
+ /*
+ * Now that we have DRAM mapped and working, we can
+ * relocate the code and continue running from DRAM.
+ *
+ * Reserve memory at end of RAM for (top down in that order):
+ * - kernel log buffer
+ * - protected RAM
+ * - LCD framebuffer
+ * - monitor code
+ * - board info struct
+ */
+#ifdef DEBUG_MEM_LAYOUT
+ printf("CFG_MONITOR_BASE: 0x%lx\n", CFG_MONITOR_BASE);
+ printf("CFG_ENV_ADDR: 0x%lx\n", CFG_ENV_ADDR);
+ printf("CFG_RELOC_MONITOR_BASE: 0x%lx (%d)\n", CFG_RELOC_MONITOR_BASE,
+ CFG_MONITOR_LEN);
+ printf("CFG_MALLOC_BASE: 0x%lx (%d)\n", CFG_MALLOC_BASE,
+ CFG_MALLOC_LEN);
+ printf("CFG_INIT_SP_OFFSET: 0x%lx (%d)\n", CFG_INIT_SP_OFFSET,
+ CFG_STACK_SIZE);
+ printf("CFG_PROM_OFFSET: 0x%lx (%d)\n", CFG_PROM_OFFSET,
+ CFG_PROM_SIZE);
+ printf("CFG_GBL_DATA_OFFSET: 0x%lx (%d)\n", CFG_GBL_DATA_OFFSET,
+ CFG_GBL_DATA_SIZE);
+#endif
+
+#ifdef CONFIG_POST
+ post_bootmode_init();
+ post_run(NULL, POST_ROM | post_bootmode_get(0));
+#endif
+
+ /*
+ * We have to relocate the command table manually
+ */
+ for (cmdtp = &__u_boot_cmd_start; cmdtp != &__u_boot_cmd_end; cmdtp++) {
+ ulong addr;
+ addr = (ulong) (cmdtp->cmd) + gd->reloc_off;
+#if DEBUG_COMMANDS
+ printf("Command \"%s\": 0x%08lx => 0x%08lx\n",
+ cmdtp->name, (ulong) (cmdtp->cmd), addr);
+#endif
+ cmdtp->cmd =
+ (int (*)(struct cmd_tbl_s *, int, int, char *[]))addr;
+
+ addr = (ulong) (cmdtp->name) + gd->reloc_off;
+ cmdtp->name = (char *)addr;
+
+ if (cmdtp->usage) {
+ addr = (ulong) (cmdtp->usage) + gd->reloc_off;
+ cmdtp->usage = (char *)addr;
+ }
+#ifdef CFG_LONGHELP
+ if (cmdtp->help) {
+ addr = (ulong) (cmdtp->help) + gd->reloc_off;
+ cmdtp->help = (char *)addr;
+ }
+#endif
+ }
+
+#if defined(CONFIG_CMD_AMBAPP) && defined(CFG_AMBAPP_PRINT_ON_STARTUP)
+ puts("AMBA:\n");
+ do_ambapp_print(NULL, 0, 0, NULL);
+#endif
+
+ /* initialize higher level parts of CPU like time base and timers */
+ cpu_init_r();
+
+ /* start timer */
+ timer_interrupt_init();
+
+ /*
+ * Enable Interrupts before any calls to udelay,
+ * the flash driver may use udelay resulting in
+ * a hang if not timer0 IRQ is enabled.
+ */
+ interrupt_init();
+
+#if !defined(CFG_NO_FLASH)
+ puts("FLASH: ");
+
+ if ((flash_size = flash_init()) > 0) {
+# ifdef CFG_FLASH_CHECKSUM
+ print_size(flash_size, "");
+ /*
+ * Compute and print flash CRC if flashchecksum is set to 'y'
+ *
+ * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
+ */
+ s = getenv("flashchecksum");
+ if (s && (*s == 'y')) {
+ printf(" CRC: %08lX",
+ crc32(0, (const unsigned char *)CFG_FLASH_BASE,
+ flash_size)
+ );
+ }
+ putc('\n');
+# else /* !CFG_FLASH_CHECKSUM */
+ print_size(flash_size, "\n");
+# endif /* CFG_FLASH_CHECKSUM */
+ } else {
+ puts(failed);
+ hang();
+ }
+
+ bd->bi_flashstart = CFG_FLASH_BASE; /* update start of FLASH memory */
+ bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */
+#if CFG_MONITOR_BASE == CFG_FLASH_BASE
+ bd->bi_flashoffset = monitor_flash_len; /* reserved area for startup monitor */
+#else
+ bd->bi_flashoffset = 0;
+#endif
+#else /* CFG_NO_FLASH */
+ bd->bi_flashsize = 0;
+ bd->bi_flashstart = 0;
+ bd->bi_flashoffset = 0;
+#endif /* !CFG_NO_FLASH */
+
+ /* initialize malloc() area */
+ mem_malloc_init();
+
+ malloc_bin_reloc();
+
+#ifdef CONFIG_SPI
+# if !defined(CFG_ENV_IS_IN_EEPROM)
+ spi_init_f();
+# endif
+ spi_init_r();
+#endif
+
+ /* relocate environment function pointers etc. */
+ env_relocate();
+
+#if defined(CONFIG_BOARD_LATE_INIT)
+ board_late_init();
+#endif
+
+ s = getenv("ethaddr");
+ for (i = 0; i < 6; ++i) {
+ bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+
+#ifdef CONFIG_HAS_ETH1
+ /* handle the 2nd ethernet address */
+
+ s = getenv("eth1addr");
+
+ for (i = 0; i < 6; ++i) {
+ bd->bi_enet1addr[i] = s ? simple_strtoul(s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+#endif
+
+#ifdef CFG_ID_EEPROM
+ mac_read_from_eeprom();
+#endif
+
+ /* IP Address */
+ bd->bi_ip_addr = getenv_IPaddr("ipaddr");
+#if defined(CONFIG_PCI)
+ /*
+ * Do pci configuration
+ */
+ pci_init();
+#endif
+
+ /* Initialize devices */
+ devices_init();
+
+ /* Initialize the jump table for applications */
+ jumptable_init();
+
+ /* Initialize the console (after the relocation and devices init) */
+ console_init_r();
+
+#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
+ serial_buffered_init();
+#endif
+
+#ifdef CONFIG_STATUS_LED
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
+#endif
+
+ udelay(20);
+
+ set_timer(0);
+
+ /* Initialize from environment */
+ if ((s = getenv("loadaddr")) != NULL) {
+ load_addr = simple_strtoul(s, NULL, 16);
+ }
+#if defined(CONFIG_CMD_NET)
+ if ((s = getenv("bootfile")) != NULL) {
+ copy_filename(BootFile, s, sizeof(BootFile));
+ }
+#endif /* CFG_CMD_NET */
+
+ WATCHDOG_RESET();
+
+#if defined(CONFIG_CMD_DOC)
+ WATCHDOG_RESET();
+ puts("DOC: ");
+ doc_init();
+#endif
+
+#if defined(CONFIG_CMD_NET)
+#if defined(CONFIG_NET_MULTI)
+ WATCHDOG_RESET();
+ puts("Net: ");
+#endif
+ eth_initialize(bd);
+#endif
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
+ WATCHDOG_RESET();
+ debug("Reset Ethernet PHY\n");
+ reset_phy();
+#endif
+
+#ifdef CONFIG_POST
+ post_run(NULL, POST_RAM | post_bootmode_get(0));
+#endif
+
+#if defined(CONFIG_CMD_IDE)
+ WATCHDOG_RESET();
+ puts("IDE: ");
+ ide_init();
+#endif /* CFG_CMD_IDE */
+
+#ifdef CONFIG_LAST_STAGE_INIT
+ WATCHDOG_RESET();
+ /*
+ * Some parts can be only initialized if all others (like
+ * Interrupts) are up and running (i.e. the PC-style ISA
+ * keyboard).
+ */
+ last_stage_init();
+#endif
+
+#ifdef CONFIG_PS2KBD
+ puts("PS/2: ");
+ kbd_init();
+#endif
+ prom_init();
+
+ /* main_loop */
+ for (;;) {
+ WATCHDOG_RESET();
+ main_loop();
+ }
+
+}
+
+void hang(void)
+{
+ puts("### ERROR ### Please RESET the board ###\n");
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+ show_boot_progress(-30);
+#endif
+ for (;;) ;
+}
+
+/************************************************************************/
--- /dev/null
+/* SPARC code for booting linux 2.6
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/byteorder.h>
+#include <asm/prom.h>
+#include <asm/cache.h>
+
+#define PRINT_KERNEL_HEADER
+
+extern image_header_t header;
+extern void srmmu_init_cpu(unsigned int entry);
+extern void prepare_bootargs(char *bootargs);
+extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]);
+
+#ifdef CONFIG_USB_UHCI
+extern int usb_lowlevel_stop(void);
+#endif
+
+/* sparc kernel argument (the ROM vector) */
+struct linux_romvec *kernel_arg_promvec;
+
+/* page szie is 4k */
+#define PAGE_SIZE 0x1000
+#define RAMDISK_IMAGE_START_MASK 0x07FF
+#define RAMDISK_PROMPT_FLAG 0x8000
+#define RAMDISK_LOAD_FLAG 0x4000
+struct __attribute__ ((packed)) {
+ char traptable[PAGE_SIZE];
+ char swapper_pg_dir[PAGE_SIZE];
+ char pg0[PAGE_SIZE];
+ char pg1[PAGE_SIZE];
+ char pg2[PAGE_SIZE];
+ char pg3[PAGE_SIZE];
+ char empty_bad_page[PAGE_SIZE];
+ char empty_bad_page_table[PAGE_SIZE];
+ char empty_zero_page[PAGE_SIZE];
+ unsigned char hdr[4]; /* ascii "HdrS" */
+ /* 00.02.06.0b is for Linux kernel 2.6.11 */
+ unsigned char linuxver_mega_major;
+ unsigned char linuxver_major;
+ unsigned char linuxver_minor;
+ unsigned char linuxver_revision;
+ /* header version 0x0203 */
+ unsigned short hdr_ver;
+ union __attribute__ ((packed)) {
+ struct __attribute__ ((packed)) {
+ unsigned short root_flags;
+ unsigned short root_dev;
+ unsigned short ram_flags;
+ unsigned int sparc_ramdisk_image;
+ unsigned int sparc_ramdisk_size;
+ unsigned int reboot_command;
+ unsigned int resv[3];
+ unsigned int end;
+ } ver_0203;
+ } hdr_input;
+} *linux_hdr;
+
+/* temporary initrd image holder */
+image_header_t ihdr;
+
+/* boot the linux kernel */
+void do_bootm_linux(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[],
+ bootm_headers_t * images)
+{
+ char *bootargs;
+ ulong ep, load;
+ ulong initrd_start, initrd_end;
+ ulong rd_data_start, rd_data_end, rd_len;
+ unsigned int data, len, checksum;
+ unsigned int initrd_addr, kernend;
+ void (*kernel) (struct linux_romvec *, void *);
+ struct lmb *lmb = images->lmb;
+ int ret;
+
+ if (images->legacy_hdr_valid) {
+ ep = image_get_ep(images->legacy_hdr_os);
+ load = image_get_load(images->legacy_hdr_os);
+#if defined(CONFIG_FIT)
+ } else if (images->fit_uname_os) {
+ int ret = fit_image_get_entry(images->fit_hdr_os,
+ images->fit_noffset_os, &ep);
+ if (ret) {
+ puts("Can't get entry point property!\n");
+ goto error;
+ }
+
+ ret = fit_image_get_load(images->fit_hdr_os,
+ images->fit_noffset_os, &load);
+ if (ret) {
+ puts("Can't get load address property!\n");
+ goto error;
+ }
+#endif
+ } else {
+ puts("Could not find kernel entry point!\n");
+ goto error;
+ }
+
+ /* Get virtual address of kernel start */
+ linux_hdr = (void *)load;
+
+ /* */
+ kernel = (void (*)(struct linux_romvec *, void *))ep;
+
+ /* check for a SPARC kernel */
+ if ((linux_hdr->hdr[0] != 'H') ||
+ (linux_hdr->hdr[1] != 'd') ||
+ (linux_hdr->hdr[2] != 'r') || (linux_hdr->hdr[3] != 'S')) {
+ puts("Error reading header of SPARC Linux kernel, aborting\n");
+ goto error;
+ }
+#ifdef PRINT_KERNEL_HEADER
+ printf("## Found SPARC Linux kernel %d.%d.%d ...\n",
+ linux_hdr->linuxver_major,
+ linux_hdr->linuxver_minor, linux_hdr->linuxver_revision);
+#endif
+
+#ifdef CONFIG_USB_UHCI
+ usb_lowlevel_stop();
+#endif
+
+ /* set basic boot params in kernel header now that it has been
+ * extracted and is writeable.
+ */
+
+ /*
+ * Are we going to use an initrd image?
+ */
+ ret = boot_get_ramdisk(argc, argv, images, IH_ARCH_SPARC,
+ &rd_data_start, &rd_data_end);
+ if (ret) {
+ /* RAM disk found but was corrupt */
+ puts("RAM Disk corrupt\n");
+ goto error;
+ }
+
+ /* Calc length of RAM disk, if zero no ramdisk available */
+ rd_len = rd_data_end - rd_data_start;
+
+ if (rd_len) {
+
+ /* Reserve the space used by PROM and stack. This is done
+ * to avoid that the RAM image is copied over stack or
+ * PROM.
+ */
+ lmb_reserve(lmb, CFG_RELOC_MONITOR_BASE, CFG_RAM_END);
+
+ ret = boot_ramdisk_high(lmb, rd_data_start, rd_len,
+ &initrd_start, &initrd_end);
+ if (ret) {
+ puts("### Failed to relocate RAM disk\n");
+ goto error;
+ }
+
+ /* Update SPARC kernel header so that Linux knows
+ * what is going on and where to find RAM disk.
+ *
+ * Set INITRD Image address relative to RAM Start
+ */
+ linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image =
+ initrd_start - CFG_RAM_BASE;
+ linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = rd_len;
+ /* Clear READ ONLY flag if set to non-zero */
+ linux_hdr->hdr_input.ver_0203.root_flags = 1;
+ /* Set root device to: Root_RAM0 */
+ linux_hdr->hdr_input.ver_0203.root_dev = 0x100;
+ linux_hdr->hdr_input.ver_0203.ram_flags = 0;
+ } else {
+ /* NOT using RAMDISK image, overwriting kernel defaults */
+ linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image = 0;
+ linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = 0;
+ /* Leave to kernel defaults
+ linux_hdr->hdr_input.ver_0203.root_flags = 1;
+ linux_hdr->hdr_input.ver_0203.root_dev = 0;
+ linux_hdr->hdr_input.ver_0203.ram_flags = 0;
+ */
+ }
+
+ /* Copy bootargs from bootargs variable to kernel readable area */
+ bootargs = getenv("bootargs");
+ prepare_bootargs(bootargs);
+
+ if (!images->autostart)
+ return;
+
+ /* turn on mmu & setup context table & page table for process 0 (kernel) */
+ srmmu_init_cpu((unsigned int)kernel);
+
+ /* Enter SPARC Linux kernel
+ * From now on the only code in u-boot that will be
+ * executed is the PROM code.
+ */
+ kernel(kernel_arg_promvec, (void *)ep);
+
+ /* It will never come to this... */
+ while (1) ;
+
+ error:
+ if (images->autostart)
+ do_reset(cmdtp, flag, argc, argv);
+ return;
+}
--- /dev/null
+/* Sparc cache library
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+void flush_cache(ulong start_addr, ulong size)
+{
+ /* Flush All Cache */
+ sparc_dcache_flush_all();
+ sparc_icache_flush_all();
+}
--- /dev/null
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2003
+ * Gleb Natapov <gnatapov@mrv.com>
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/irq.h>
+
+/* Implemented by SPARC CPUs */
+extern int interrupt_init_cpu(void);
+extern void timer_interrupt_cpu(void *arg);
+extern int timer_interrupt_init_cpu(void);
+
+int intLock(void)
+{
+ unsigned int pil;
+
+ pil = get_pil();
+
+ /* set PIL to 15 ==> no pending interrupts will interrupt CPU */
+ set_pil(15);
+
+ return pil;
+}
+
+void intUnlock(int oldLevel)
+{
+ set_pil(oldLevel);
+}
+
+void enable_interrupts(void)
+{
+ set_pil(0); /* enable all interrupts */
+}
+
+int disable_interrupts(void)
+{
+ return intLock();
+}
+
+int interrupt_init(void)
+{
+ int ret;
+
+ /* call cpu specific function from $(CPU)/interrupts.c */
+ ret = interrupt_init_cpu();
+
+ /* enable global interrupts */
+ enable_interrupts();
+
+ return ret;
+}
+
+/* timer interrupt/overflow counter */
+static volatile ulong timestamp = 0;
+
+/* regs can not be used here! regs is actually the pointer given in
+ * irq_install_handler
+ */
+void timer_interrupt(struct pt_regs *regs)
+{
+ /* call cpu specific function from $(CPU)/interrupts.c */
+ timer_interrupt_cpu((void *)regs);
+
+ timestamp++;
+}
+
+void reset_timer(void)
+{
+ timestamp = 0;
+}
+
+ulong get_timer(ulong base)
+{
+ return (timestamp - base);
+}
+
+void set_timer(ulong t)
+{
+ timestamp = t;
+}
+
+void timer_interrupt_init(void)
+{
+ int irq;
+
+ reset_timer();
+
+ irq = timer_interrupt_init_cpu();
+
+ if (irq < 0) {
+ /* cpu specific code handled the interrupt registration it self */
+ return;
+ }
+ /* register interrupt handler for timer */
+ irq_install_handler(irq, (void (*)(void *))timer_interrupt, NULL);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2007
+ * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* Implemented by SPARC CPUs */
+extern void cpu_wait_ticks(unsigned long ticks);
+extern unsigned long cpu_usec2ticks(unsigned long usec);
+extern unsigned long cpu_ticks2usec(unsigned long ticks);
+
+/* ------------------------------------------------------------------------- */
+
+void wait_ticks(unsigned long ticks)
+{
+ cpu_wait_ticks(ticks);
+}
+
+/*
+ * This function is intended for SHORT delays only.
+ */
+unsigned long usec2ticks(unsigned long usec)
+{
+ return cpu_usec2ticks(usec);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * We implement the delay by converting the delay (the number of
+ * microseconds to wait) into a number of time base ticks; then we
+ * watch the time base until it has incremented by that amount.
+ */
+void udelay(unsigned long usec)
+{
+ ulong ticks = usec2ticks(usec);
+
+ wait_ticks(ticks);
+}
+
+/* ------------------------------------------------------------------------- */
+
+unsigned long ticks2usec(unsigned long ticks)
+{
+ return cpu_ticks2usec(ticks);
+}
+
+/* ------------------------------------------------------------------------- */
+
+int init_timebase(void)
+{
+
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
#
-# (C) Copyright 2004 Atmark Techno, Inc.
+# (C) Copyright 2007-2008 Michal Simek
+# Michal SIMEK <monstr@monstr.eu>
#
+# (C) Copyright 2004 Atmark Techno, Inc.
# Yasushi SHOJI <yashi@atmark-techno.com>
#
# See file CREDITS for list of people who contributed to this
#
PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__
-
-ifdef CONFIG_MICROBLAZE_HARD_MULT
-PLATFORM_CPPFLAGS += -mno-xl-soft-mul
-endif
-
-ifdef CONFIG_MICROBLAZE_HARD_DIV
-PLATFORM_CPPFLAGS += -mno-xl-soft-div
-endif
-
-ifdef CONFIG_MICROBLAZE_HARD_BARREL
-PLATFORM_CPPFLAGS += -mxl-barrel-shift
-endif
--- /dev/null
+#
+# (C) Copyright 2007
+# Daniel Hellstrom, Gaisler Research, daniel@gaisler.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_CPPFLAGS += -DCONFIG_SPARC -D__sparc__
projects / oweals / u-boot.git / commitdiff