Wolfgang Denk [Sun, 13 Apr 2008 16:39:26 +0000 (09:39 -0700)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc83xx
Wolfgang Denk [Sun, 13 Apr 2008 16:38:13 +0000 (09:38 -0700)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc85xx
Wolfgang Denk [Sun, 13 Apr 2008 16:34:11 +0000 (09:34 -0700)]
Merge branch 'master' of git://denx.de/git/u-boot-ppc4xx
Wolfgang Denk [Sun, 13 Apr 2008 16:30:26 +0000 (09:30 -0700)]
Merge branch 'master' of git://denx.de/git/u-boot-microblaze
Wolfgang Denk [Sun, 13 Apr 2008 16:21:00 +0000 (09:21 -0700)]
Merge branch 'master' of git://denx.de/git/u-boot-sparc
Lee Nipper [Thu, 10 Apr 2008 14:35:06 +0000 (09:35 -0500)]
mpc83xx: Update DIMM data bus width test to support 40-bit width
32-bit wide ECC memory modules report 40-bit width.
Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.
Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Mon, 31 Mar 2008 09:05:12 +0000 (17:05 +0800)]
mpc83xx: Fix the bug of serdes initialization
Currently the serdes will not be initializated due to the
partid's error.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Thu, 3 Apr 2008 08:28:29 +0000 (16:28 +0800)]
mpc83xx: Fix the SATA clock setting of 837x targets
Currently the SATA controller clock is configured as CSB clock,
usually the CSB clock is 400/333/266MHz.
However, The SATA IP block is only guaranteed to operate up to
200 MHz as stated in the HW spec.
The bug is reported by Joe D'Abbraccio <ljd015@freescale.com>
This patch makes the SATA clock as half of CSB clock.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 2 Apr 2008 11:41:21 +0000 (13:41 +0200)]
mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kumar Gala [Wed, 9 Apr 2008 09:20:57 +0000 (04:20 -0500)]
85xx: Fix detection of MP cpu spin up
We were looking at the wrong memory offset to determine of a secondary
cpu had been spun up or not. Also added a warning message if the
all the secondary cpus we expect don't spin up.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Tue, 8 Apr 2008 15:45:50 +0000 (10:45 -0500)]
85xx: Use SVR_SOC_VER instead of SVR_VER
The recent change introduced by 'Update SVR numbers to expand support'
now requires that we use SVR_SOC_VER instead of SVR_VER if we want
to compare against a particular processor id.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Eugene O'Brien [Fri, 11 Apr 2008 14:00:35 +0000 (10:00 -0400)]
ppc4xx: Fix power mgt definitions for PPC440
Corrected DCR addresses of PPC440EP power management registers.
Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
Wolfgang Denk [Fri, 11 Apr 2008 13:11:26 +0000 (15:11 +0200)]
Stefan Roese [Fri, 11 Apr 2008 05:02:29 +0000 (07:02 +0200)]
ppc4xx: Update Kilauea defconfig to use device-tree booting as default
This patch reworks the default environment on Kilauea/Haleakala. Now
"net_nfs" for exmaple uses the device-tree style booting formerly know
as "net_nfs_fdt". Also the addresses in RAM were changed because of the
new image booting support, which check for image overwriting. So the
addresses needed togeet adjusted.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Wed, 9 Apr 2008 09:58:02 +0000 (11:58 +0200)]
ppc4xx: Fix Canyonlands default environment to work with new image support
Since the new image support checks for image overwriting, the default
environment needs to get adjusted to use correct addresses.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Wed, 9 Apr 2008 09:54:11 +0000 (11:54 +0200)]
ppc: Revert patch
70431e8a that used _start instead of CFG_MONITOR_BASE
The patch
70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step
closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
on 4xx systems _start currently cannot be used for this calculation.
So revert back to the original version for now.
Signed-off-by: Stefan Roese <sr@denx.de>
Michal Simek [Fri, 28 Mar 2008 11:49:52 +0000 (12:49 +0100)]
microblaze: Sort microblaze boards in MAKEALL script
Michal Simek [Fri, 28 Mar 2008 10:58:45 +0000 (11:58 +0100)]
microblaze: clean microblaze_config.mk
FLAGS are generated by U-BOOT generator.
Board specific FLAGS are in board directory
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 28 Mar 2008 11:47:19 +0000 (12:47 +0100)]
microblaze: xupv2p fix config file for supporting FDT
Michal Simek [Fri, 28 Mar 2008 10:53:02 +0000 (11:53 +0100)]
microblaze: ml401 fix config file for supporting FDT
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 28 Mar 2008 10:22:48 +0000 (11:22 +0100)]
microblaze: ml401 - add ifdef for GPIO
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 28 Mar 2008 11:13:03 +0000 (12:13 +0100)]
microblaze: clean uart16550 and uartlite handling
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 28 Mar 2008 10:08:31 +0000 (11:08 +0100)]
microblaze: Add Emaclite driver to Makefile
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 28 Mar 2008 10:08:01 +0000 (11:08 +0100)]
microblaze: Add Emac driver to Makefile
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 28 Mar 2008 11:42:29 +0000 (12:42 +0100)]
microblaze: add Emac ethernet driver
Michal Simek [Fri, 28 Mar 2008 11:41:56 +0000 (12:41 +0100)]
microblaze: add Emaclite ethernet driver
Michal Simek [Fri, 28 Mar 2008 10:04:01 +0000 (11:04 +0100)]
microblaze: ML401 and XUPV2P remove emac and emaclite reference
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 28 Mar 2008 09:59:32 +0000 (10:59 +0100)]
microblaze: remove old setting for emac driver
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Fri, 28 Mar 2008 09:58:15 +0000 (10:58 +0100)]
microblaze: Clean Makefile from ancient emac driver
Signed-off-by: Michal Simek <monstr@monstr.eu>
Daniel Hellstrom [Fri, 28 Mar 2008 09:20:43 +0000 (10:20 +0100)]
SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See gaisler.com for information.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Daniel Hellstrom [Wed, 26 Mar 2008 22:38:48 +0000 (23:38 +0100)]
SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See gaisler.com for information.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Daniel Hellstrom [Wed, 26 Mar 2008 22:34:47 +0000 (23:34 +0100)]
SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See gaisler.com for information.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Daniel Hellstrom [Fri, 28 Mar 2008 09:06:52 +0000 (10:06 +0100)]
SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See gaisler.com for information.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Daniel Hellstrom [Wed, 26 Mar 2008 22:26:48 +0000 (23:26 +0100)]
SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See gaisler.com for board information.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Daniel Hellstrom [Fri, 28 Mar 2008 09:00:33 +0000 (10:00 +0100)]
SPARC: Added support for SPARC LEON2 SOC Processor.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Daniel Hellstrom [Wed, 26 Mar 2008 22:00:38 +0000 (23:00 +0100)]
SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Daniel Hellstrom [Wed, 26 Mar 2008 21:51:29 +0000 (22:51 +0100)]
SPARC: Added support for SPARC LEON3 SOC processor.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Daniel Hellstrom [Fri, 28 Mar 2008 07:29:26 +0000 (08:29 +0100)]
SPARC: added SPARC support for new uimage in common code.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Daniel Hellstrom [Wed, 26 Mar 2008 21:36:03 +0000 (22:36 +0100)]
SPARC: added SPARC board information to the command bdinfo.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Daniel Hellstrom [Fri, 28 Mar 2008 08:47:00 +0000 (09:47 +0100)]
SPARC: Added generic support for SPARC architecture.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Wolfgang Denk [Mon, 7 Apr 2008 22:20:52 +0000 (00:20 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-fdt
Wolfgang Denk [Mon, 7 Apr 2008 22:16:36 +0000 (00:16 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-at91
Wolfgang Denk [Mon, 7 Apr 2008 22:11:22 +0000 (00:11 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-net
Wolfgang Denk [Mon, 7 Apr 2008 22:10:17 +0000 (00:10 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-coldfire
Wolfgang Denk [Mon, 7 Apr 2008 22:06:47 +0000 (00:06 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-blackfin
Wolfgang Denk [Mon, 7 Apr 2008 22:05:42 +0000 (00:05 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-arm
Wolfgang Denk [Mon, 7 Apr 2008 22:04:39 +0000 (00:04 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-sh
Wolfgang Denk [Mon, 7 Apr 2008 21:59:10 +0000 (23:59 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc83xx
Conflicts:
lib_ppc/board.c
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 7 Apr 2008 21:55:47 +0000 (23:55 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-cfi-flash
Wolfgang Denk [Mon, 7 Apr 2008 21:52:32 +0000 (23:52 +0200)]
Merge branch 'master' of git://denx.de/git/u-boot-ppc4xx
Stefan Roese [Thu, 3 Apr 2008 12:50:34 +0000 (14:50 +0200)]
ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3
This patch fixes a problem with the RGMII setup of the 460GT. The 460GT
has 2 RGMII instances and we need to configure the 2nd RGMII instance
for the EMAC2+3 channels.
Signed-off-by: Stefan Roese <sr@denx.de>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 2 Apr 2008 06:03:56 +0000 (08:03 +0200)]
MPC8xx: Fix libfdt support introduced in commit
77ff7b74
fdt.c: In function 'ft_cpu_setup':
fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Andy Fleming [Tue, 1 Apr 2008 01:45:56 +0000 (20:45 -0500)]
Fix fdt set command to conform to dts spec
The fdt set command was treating properties specified as <00> and <0011>
as byte streams, rather than as an array of cells. As we already have
syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
we should use the <> syntax to describe arrays of cells, which are always
32-bits per element. If we imagine this likely (IMHO) scenario:
> fdt set /ethernet-phy@1 reg <1>
With the old code, this would create a bad fdt, since the reg cell would be
made to be one byte in length. But the cell must be 4 bytes, so this would
break mysteriously.
Also, the dts spec calls for constants inside the angle brackets (<>)
to conform to C constant standards as they pertain to base.
Take this scenario:
> fdt set /ethernet@f00 reg <0xe250000\ 0x1000>
The old fdt command would complain that it couldn't parse that. Or, if you
wanted to specify that a certain clock ran at 33 MHz, you'd be required to
do this:
> fdt set /mydev clock <
1f78a40>
Whereas the new code will accept decimal numbers.
While I was in there, I extended the fdt command parser to handle property
strings which are split across multiple arguments:
> fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
> fdt p /ethernet@f00
ethernet@f00 {
interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
};
Lastly, the fdt print code was rearranged slightly to print arrays of cells
if the length of the property is a multiple of 4 bytes, and to not print
leading zeros.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Stefan Roese [Wed, 2 Apr 2008 06:39:33 +0000 (08:39 +0200)]
ppc4xx: Canyonlands: Init SATA/PCIe port correctly
Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
interface. This usage can be configured with the jumper J6. This patch
correctly configures the SATA/PCIe PHY for SATA usage when this jumper
is installed.
Signed-off-by: Stefan Roese <sr@denx.de>
Kim Phillips [Fri, 28 Mar 2008 22:37:49 +0000 (17:37 -0500)]
remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code
finish off what commit
43ddd9c820fec44816188f53346b464e20b3142d,
"Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
started.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Jean-Christophe PLAGNIOL-VILLARD [Tue, 1 Apr 2008 05:30:51 +0000 (07:30 +0200)]
dataflash: Move CONFIG_HAS_DATAFLASH to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Tor Krill [Fri, 28 Mar 2008 14:29:45 +0000 (15:29 +0100)]
Add Vitesse 8601 support to TSEC driver
Add phy_info for Vitesse VSC8601.
Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.
Signed-off-by: Tor Krill <tor@excito.com>
Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Daniel Hellstrom [Mon, 31 Mar 2008 14:25:00 +0000 (14:25 +0000)]
SPARC: added SMC91111 driver in and out macros for LEON processors.
This patch makes SPARC/LEON processors able to read and write
to the SMC91111 chip using the chip external I/O bus of the memory
controller. This patchs defines the standard in and out macros
expected by the SMC9111 driver.
To access that I/O bus one must set up the memory controller
(MCTRL or FTMCTRL) correctly. It is assumed that the user sets
up this correctly when the other MCTRL parameters are set up. It
can be set up from the board configuration header file.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Stelian Pop [Wed, 26 Mar 2008 17:52:34 +0000 (18:52 +0100)]
Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards
Signed-off-by: Stelian Pop <stelian@popies.net>
Jean-Christophe PLAGNIOL-VILLARD [Mon, 31 Mar 2008 19:31:04 +0000 (21:31 +0200)]
AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Stelian Pop [Wed, 26 Mar 2008 17:52:33 +0000 (18:52 +0100)]
Add support for AT91SAM9260EK
Support for booting from internal DataFlash, external DataFlash card
or NAND flash is available.
Signed-off-by: Stelian Pop <stelian@popies.net>
Jean-Christophe PLAGNIOL-VILLARD [Mon, 31 Mar 2008 19:20:49 +0000 (21:20 +0200)]
AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Mon, 31 Mar 2008 19:12:17 +0000 (21:12 +0200)]
AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Stelian Pop [Wed, 26 Mar 2008 19:52:32 +0000 (20:52 +0100)]
Port AT91CAP9 to the new headers
Adapt the existing AT91CAP9 code to the new headers and APIs.
Signed-off-by: Stelian Pop <stelian@popies.net>
Stelian Pop [Wed, 26 Mar 2008 18:52:31 +0000 (19:52 +0100)]
Finish header files reworking
Replace AT91CAP9.h file with several splitted header files coming
from the Linux kernel.
This is part 2 of the replacement: more header imports and edits.
Signed-off-by: Stelian Pop <stelian@popies.net>
Stelian Pop [Wed, 26 Mar 2008 18:52:30 +0000 (19:52 +0100)]
Import several header files from Linux
Replace AT91CAP9.h file with several splitted header files coming
from the Linux kernel.
This is part 1 of the replacement: pristine header files import.
Signed-off-by: Stelian Pop <stelian@popies.net>
Stelian Pop [Wed, 26 Mar 2008 19:52:28 +0000 (20:52 +0100)]
Move at91cap9 specific files to at91sam9 directory
AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
common infrastructure can be used. Let this infrastructure be
named after the AT91SAM9 family, and move the existing AT91CAP9
files to the new place.
Signed-off-by: Stelian Pop <stelian@popies.net>
Stelian Pop [Wed, 26 Mar 2008 20:52:27 +0000 (21:52 +0100)]
Use timer_init() instead of board supplied interrupt_init()
The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
the board, so use timer_init() instead of interrupt_init().
Signed-off-by: Stelian Pop <stelian@popies.net>
Stelian Pop [Wed, 26 Mar 2008 20:52:36 +0000 (21:52 +0100)]
Cleanup DataFlash partition handling
DataFlash partition information has become a mess. This patch
defines a single partition scheme for Atmel DataFlashes. This partition
scheme will be used by all AT91CAP9 and AT91SAM9 boards.
Signed-off-by: Stelian Pop <stelian@popies.net>
TsiChung Liew [Fri, 28 Mar 2008 13:47:45 +0000 (08:47 -0500)]
ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S
When the version_string function in start.S is not 4-byte align,
it will cause the compiler generates "unaligned opcodes detected
in executable segment". This issue affects all ColdFire CPUs.
By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if
it is not aligned.
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: John Rigby <jrigby@freescale.com>
TsiChung Liew [Tue, 25 Mar 2008 20:41:15 +0000 (15:41 -0500)]
ColdFire: Add dspi and serial flash support for MCF5445x
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: John Rigby <jrigby@freescale.com>
TsiChung Liew [Tue, 18 Mar 2008 22:37:01 +0000 (17:37 -0500)]
ColdFire: Remove R5200 board
This board never went into production
Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: John Rigby <jrigby@freescale.com>
Matthew Fettke [Thu, 24 Jan 2008 20:02:32 +0000 (14:02 -0600)]
ColdFire: Added M5275EVB support.
Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: John Rigby <jrigby@freescale.com>
Matthew Fettke [Mon, 4 Feb 2008 21:38:20 +0000 (15:38 -0600)]
ColdFire: Added MCF5275 cpu support.
Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: John Rigby <jrigby@freescale.com>
TsiChung Liew [Mon, 17 Mar 2008 17:14:11 +0000 (12:14 -0500)]
ColdFire: Define bootdelay in configuration file for M52277EVB
Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com>
Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: John Rigby <jrigby@freescale.com>
TsiChung Liew [Mon, 17 Mar 2008 17:09:07 +0000 (12:09 -0500)]
ColdFire: Fix second memory Chipselect for M5475EVB
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: John Rigby <jrigby@freescale.com>
TsiChung Liew [Thu, 13 Mar 2008 19:26:32 +0000 (14:26 -0500)]
ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: John Rigby <jrigby@freescale.com>
Larry Johnson [Mon, 31 Mar 2008 01:33:04 +0000 (20:33 -0500)]
ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup
Signed-off-by: Larry Johnson <lrj@acm.org>
Stefan Roese [Mon, 31 Mar 2008 10:20:48 +0000 (12:20 +0200)]
ppc4xx: Small whitespace fix of esd patches
Signed-off-by: Stefan Roese <sr@denx.de>
Matthias Fuchs [Sun, 30 Mar 2008 16:52:44 +0000 (18:52 +0200)]
ppc4xx: Cleanup PMC440 board support
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Matthias Fuchs [Sun, 30 Mar 2008 16:52:06 +0000 (18:52 +0200)]
ppc4xx: Add ptm configuration variables for PMC440
Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms
environment variables.
Cleanup pci_target_init.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Matthias Fuchs [Sun, 30 Mar 2008 16:01:15 +0000 (18:01 +0200)]
ppc4xx: Minor updates for DU440 boards
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Mike Frysinger [Tue, 19 Feb 2008 05:54:20 +0000 (00:54 -0500)]
Blackfin: cleanup and overhaul common board init functions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 19 Feb 2008 05:50:58 +0000 (00:50 -0500)]
Blackfin: cleanup lib_blackfin/cache.c
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 30 Mar 2008 19:46:13 +0000 (15:46 -0400)]
Blackfin: unify cpu and boot modes
All of the duplicated code for Blackfin processors and boot modes have been
unified. After all, the core is the same for all processors, just the
peripheral set differs (which gets handled in the drivers).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Stelian Pop [Wed, 26 Mar 2008 21:52:35 +0000 (22:52 +0100)]
Fix CFG_NO_FLASH compilation.
Many Atmel boards have no "real" (NOR) flash on board, and rely only
on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
be present in a board configuration file, while still enabling flash
commands like 'flinfo', 'protect', etc.
Signed-off-by: Stelian Pop <stelian@popies.net>
Mike Frysinger [Tue, 19 Feb 2008 05:58:13 +0000 (00:58 -0500)]
Blackfin: BF537-stamp: cleanup spi flash driver
This punts the old spi flash driver for a new/generalized one until the
common one can be integrated.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Ben Warren [Sun, 30 Mar 2008 15:34:34 +0000 (11:34 -0400)]
Fix macro typo in common/cmd_mii.c
This typo was introduced in commit
233a8bcd94997f3f345833a3b82e836222f2a206. I
actually applied the wrong patch.
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 30 Mar 2008 14:39:53 +0000 (16:39 +0200)]
use correct at91rm9200 register name in m501sk board
This fixes a naming bug for at91rm9200 lowlevel init code:
NOR boot flash is on chipselect 0, not chipselect 2. This
makes code use the register name from chip datasheets.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
David Brownell [Fri, 18 Jan 2008 20:55:00 +0000 (12:55 -0800)]
use correct at91rm9200 register name
This fixes a naming bug for at91rm9200 lowlevel init code:
NOR boot flash is on chipselect 0, not chipselect 2. This
makes code use the register name from chip datasheets.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Fri, 18 Jan 2008 20:45:45 +0000 (12:45 -0800)]
add missing ARM boards to MAKEALL
Add some missing ARM boards to MAKEALL. These build correctly,
unlike several of the boards already listed.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Peter Pearse [Sun, 30 Mar 2008 10:34:09 +0000 (11:34 +0100)]
Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c
to prevent compilation error.
Signed-off-by: Peter Pearse <peter.pearse@arm.com>
Guennadi Liakhovetski [Sun, 30 Mar 2008 10:32:30 +0000 (11:32 +0100)]
Support for the MX31ADS evaluation board from Freescale
This patch adds support for the MX31ADS evaluation board from Freescale,
initialization code is copied from RedBoot sources, also provided by Freescale.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Sascha Hauer [Sun, 30 Mar 2008 10:32:27 +0000 (11:32 +0100)]
Phytec Phycore-i.MX31 support
This patch adds support for the Phytec Phycore-i.MX31 board
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Sascha Hauer [Sun, 30 Mar 2008 10:32:24 +0000 (11:32 +0100)]
mx31 litekit support
This patch adds support for the mx31 litekit board
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Sascha Hauer [Sun, 30 Mar 2008 10:32:21 +0000 (11:32 +0100)]
add SMSC LAN9x1x Network driver
This patch adds a driver for the following smsc network controllers:
LAN9115
LAN9116
LAN9117
LAN9215
LAN9216
LAN9217
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Sascha Hauer [Sun, 30 Mar 2008 10:32:16 +0000 (11:32 +0100)]
add an i2c driver for mx31
This patch adds an i2c driver for Freescale i.MX processors
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Sascha Hauer [Sun, 30 Mar 2008 10:30:43 +0000 (11:30 +0100)]
core support for Freescale mx31
This patch adds the core support for Freescale mx31
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Sascha Hauer [Sun, 30 Mar 2008 10:28:46 +0000 (11:28 +0100)]
Separate omap24xx specific code from arm1136
Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Peter Pearse [Sun, 30 Mar 2008 10:23:05 +0000 (11:23 +0100)]
Add pmdra into MAKEALL
Signed-off-by: Peter Pearse <peter.pearse@arm.com>
projects / oweals / u-boot.git / log