arch/arm/dts/fsl-lx2160a.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+ OR X11
   2 /*
   3  * NXP lx2160a SOC common device tree source
   4  *
   5  * Copyright 2018 NXP
   6  *
   7  */
   8
   9 / {
  10         compatible = "fsl,lx2160a";
  11         interrupt-parent = <&gic>;
  12         #address-cells = <2>;
  13         #size-cells = <2>;
  14
  15         memory@80000000 {
  16                 device_type = "memory";
  17                 reg = <0x00000000 0x80000000 0 0x80000000>;
  18                       /* DRAM space - 1, size : 2 GB DRAM */
  19         };
  20
  21         sysclk: sysclk {
  22                 compatible = "fixed-clock";
  23                 #clock-cells = <0>;
  24                 clock-frequency = <100000000>;
  25                 clock-output-names = "sysclk";
  26         };
  27
  28         clockgen: clocking@1300000 {
  29                 compatible = "fsl,ls2080a-clockgen";
  30                 reg = <0 0x1300000 0 0xa0000>;
  31                 #clock-cells = <2>;
  32                 clocks = <&sysclk>;
  33         };
  34
  35         gic: interrupt-controller@6000000 {
  36                 compatible = "arm,gic-v3";
  37                 reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
  38                       <0x0 0x06200000 0 0x100000>; /* GICR */
  39                 #interrupt-cells = <3>;
  40                 interrupt-controller;
  41                 interrupts = <1 9 0x4>;
  42         };
  43
  44         timer {
  45                 compatible = "arm,armv8-timer";
  46                 interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
  47                              <1 14 0x8>, /* Physical NS PPI, active-low */
  48                              <1 11 0x8>, /* Virtual PPI, active-low */
  49                              <1 10 0x8>; /* Hypervisor PPI, active-low */
  50         };
  51
  52         uart0: serial@21c0000 {
  53                 compatible = "arm,pl011";
  54                 reg = <0x0 0x21c0000 0x0 0x1000>;
  55                 clocks = <&clockgen 4 0>;
  56         };
  57
  58         uart1: serial@21d0000 {
  59                 compatible = "arm,pl011";
  60                 reg = <0x0 0x21d0000 0x0 0x1000>;
  61                 clocks = <&clockgen 4 0>;
  62         };
  63
  64         uart2: serial@21e0000 {
  65                 compatible = "arm,pl011";
  66                 reg = <0x0 0x21e0000 0x0 0x1000>;
  67                 clocks = <&clockgen 4 0>;
  68                 status = "disabled";
  69         };
  70
  71         uart3: serial@21f0000 {
  72                 compatible = "arm,pl011";
  73                 reg = <0x0 0x21f0000 0x0 0x1000>;
  74                 clocks = <&clockgen 4 0>;
  75                 status = "disabled";
  76         };
  77
  78         dspi0: dspi@2100000 {
  79                 compatible = "fsl,vf610-dspi";
  80                 #address-cells = <1>;
  81                 #size-cells = <0>;
  82                 reg = <0x0 0x2100000 0x0 0x10000>;
  83                 interrupts = <0 26 0x4>; /* Level high type */
  84                 num-cs = <6>;
  85         };
  86
  87         dspi1: dspi@2110000 {
  88                 compatible = "fsl,vf610-dspi";
  89                 #address-cells = <1>;
  90                 #size-cells = <0>;
  91                 reg = <0x0 0x2110000 0x0 0x10000>;
  92                 interrupts = <0 240 0x4>; /* Level high type */
  93                 num-cs = <6>;
  94         };
  95
  96         dspi2: dspi@2120000 {
  97                 compatible = "fsl,vf610-dspi";
  98                 #address-cells = <1>;
  99                 #size-cells = <0>;
 100                 reg = <0x0 0x2120000 0x0 0x10000>;
 101                 interrupts = <0 241 0x4>; /* Level high type */
 102                 num-cs = <6>;
 103         };
 104
 105         usb0: usb3@3100000 {
 106                 compatible = "fsl,layerscape-dwc3";
 107                 reg = <0x0 0x3100000 0x0 0x10000>;
 108                 interrupts = <0 80 0x4>; /* Level high type */
 109                 dr_mode = "host";
 110         };
 111
 112         usb1: usb3@3110000 {
 113                 compatible = "fsl,layerscape-dwc3";
 114                 reg = <0x0 0x3110000 0x0 0x10000>;
 115                 interrupts = <0 81 0x4>; /* Level high type */
 116                 dr_mode = "host";
 117         };
 118 };