oweals/u-boot.git
4 years agocommon: Update comment to show progress
Simon Glass [Sat, 28 Dec 2019 17:45:12 +0000 (10:45 -0700)]
common: Update comment to show progress

This file doesn't include any declarations anymore but it does include
other headers. Update the header comment to mention this.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Collect all the header files together
Simon Glass [Sat, 28 Dec 2019 17:45:11 +0000 (10:45 -0700)]
common: Collect all the header files together

There are many header files included here. Put them all together since the
blank lines are not useful.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move and rename CONFIG_SYS_SUPPORT_64BIT_DATA
Simon Glass [Sat, 28 Dec 2019 17:45:10 +0000 (10:45 -0700)]
common: Move and rename CONFIG_SYS_SUPPORT_64BIT_DATA

This is not really a CONFIG since it is not intended to be set by boards.
Move it into the compiler header with other similar defines, and rename
it.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move ROUND() into kernel.h
Simon Glass [Sat, 28 Dec 2019 17:45:09 +0000 (10:45 -0700)]
common: Move ROUND() into kernel.h

Move this macro in with all the other rounding macros.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move check_member() to kernel.h
Simon Glass [Sat, 28 Dec 2019 17:45:08 +0000 (10:45 -0700)]
common: Move check_member() to kernel.h

The kernel.h file has a number of useful macros including a few related
to structures. Move check_member() there too.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move hang() to the same header as panic()
Simon Glass [Sat, 28 Dec 2019 17:45:07 +0000 (10:45 -0700)]
common: Move hang() to the same header as panic()

At present panic() is in the vsprintf.h header file. That does not seem
like an obvious choice for hang(), even though it relates to panic(). So
let's put hang() in its own header.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Migrate a few more files]
Signed-off-by: Tom Rini <trini@konsulko.com>
4 years agocommon: Move testdram() into init.h
Simon Glass [Sat, 28 Dec 2019 17:45:06 +0000 (10:45 -0700)]
common: Move testdram() into init.h

This function is called during init so move it to the init header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move RAM-sizing functions to init.h
Simon Glass [Sat, 28 Dec 2019 17:45:05 +0000 (10:45 -0700)]
common: Move RAM-sizing functions to init.h

These functions relate to memory init so move them into the init
header.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Rename and move source()
Simon Glass [Sat, 28 Dec 2019 17:45:04 +0000 (10:45 -0700)]
common: Rename and move source()

This function has a very generic name which does not adequately describe
its purpose. Rename it and move it to image.h, since it relates to reading
a script from an image.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move the image globals into image.h
Simon Glass [Sat, 28 Dec 2019 17:45:03 +0000 (10:45 -0700)]
common: Move the image globals into image.h

These three globals relate to image handling. Move them to the image
header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agoimage: Rename load_addr, save_addr, save_size
Simon Glass [Sat, 28 Dec 2019 17:45:02 +0000 (10:45 -0700)]
image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move reset_cpu() to the CPU header
Simon Glass [Sat, 28 Dec 2019 17:45:01 +0000 (10:45 -0700)]
common: Move reset_cpu() to the CPU header

Move this function out of common.h and into a relevant header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move reset_misc() function to arch header
Simon Glass [Sat, 28 Dec 2019 17:45:00 +0000 (10:45 -0700)]
common: Move reset_misc() function to arch header

This function is only used on ARM devices. Move it out of the common file
and to a arch-specific header.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move get_tbclk() to time.h
Simon Glass [Sat, 28 Dec 2019 17:44:59 +0000 (10:44 -0700)]
common: Move get_tbclk() to time.h

This function related to timer and most of the timer functions are in
time.h, so move this function there.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move clock functions into a new file
Simon Glass [Sat, 28 Dec 2019 17:44:58 +0000 (10:44 -0700)]
common: Move clock functions into a new file

These three clock functions don't use driver model and should be migrated.
In the meantime, create a new file to hold them.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move upmconfig() to ppc.h
Simon Glass [Sat, 28 Dec 2019 17:44:57 +0000 (10:44 -0700)]
common: Move upmconfig() to ppc.h

This file is only used by PowerPC so move it to an arch-specific header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move ll_boot_init() to init.h
Simon Glass [Sat, 28 Dec 2019 17:44:56 +0000 (10:44 -0700)]
common: Move ll_boot_init() to init.h

This is an init-related function so belongs in that file. Move it.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: arm: Move s_init() to an ARM-specific header
Simon Glass [Sat, 28 Dec 2019 17:44:55 +0000 (10:44 -0700)]
common: arm: Move s_init() to an ARM-specific header

This function is only used on ARM devices so does not belong in the global
common header file. Move it to an ARM header.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move device-tree setup functions to fdt_support.h
Simon Glass [Sat, 28 Dec 2019 17:44:54 +0000 (10:44 -0700)]
common: Move device-tree setup functions to fdt_support.h

These functions relate to setting up the device tree for booting the OS.
The fdt_support.h header file supports similar functions, so move these
there.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move type declarations to linux/types.h
Simon Glass [Sat, 28 Dec 2019 17:44:53 +0000 (10:44 -0700)]
common: Move type declarations to linux/types.h

This file already has lots of type declarations so it seems better to put
all of them there.

Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Drop the symbol_lookup() declaration
Simon Glass [Sat, 28 Dec 2019 17:44:52 +0000 (10:44 -0700)]
common: Drop the symbol_lookup() declaration

This function is not called anywhere so we can drop the declaration. If
it is needed one day, it should be added in its own header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Drop CONFIG_HAS_POST
Simon Glass [Sat, 28 Dec 2019 17:44:51 +0000 (10:44 -0700)]
common: Drop CONFIG_HAS_POST

This only exists to control whether the post/ directory is build. It is
just as easy to check this in the Makefile. Remove CONFIG_HAS_POST and use
an ifdef in the Makefile instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Drop CONFIG_POST_STD/ALT_LIST
Simon Glass [Sat, 28 Dec 2019 17:44:50 +0000 (10:44 -0700)]
common: Drop CONFIG_POST_STD/ALT_LIST

These CONFIG options are not used anymore. CONFIG_POST_ALT_LIST just
causes CONFIG_POST_STD_LIST to be set and it causes tests.c to be
compiled. So just make compiling tests.c unconditional.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move CONFIG_SYS_DEF_EEPROM_ADDR out of common.h
Simon Glass [Sat, 28 Dec 2019 17:44:49 +0000 (10:44 -0700)]
common: Move CONFIG_SYS_DEF_EEPROM_ADDR out of common.h

This define seems better suited to the eeprom header file, particularly
as it is only used in the eeprom.c file.

Move it.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move reset_phy() to net.h
Simon Glass [Sat, 28 Dec 2019 17:44:48 +0000 (10:44 -0700)]
common: Move reset_phy() to net.h

This is a network function so let's move it into that header.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Drop floppy disk support
Simon Glass [Sat, 28 Dec 2019 17:44:47 +0000 (10:44 -0700)]
common: Drop floppy disk support

This seems pretty old now. It has not been converted to driver model and
is not used by any boards.

Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move jumptable_init() out of common.h
Simon Glass [Sat, 28 Dec 2019 17:44:46 +0000 (10:44 -0700)]
common: Move jumptable_init() out of common.h

This function is defined in exports.c so move it to its header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
4 years agocommon: Move relocate_code() to init.h
Simon Glass [Sat, 28 Dec 2019 17:44:45 +0000 (10:44 -0700)]
common: Move relocate_code() to init.h

This is an init function so move it out of the common header. Avoid using
the typedef so that we don't have to include the global_data header file.

Also tidy up the function style in comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move functions for loading from fat/ext2 to fs.h
Simon Glass [Sat, 28 Dec 2019 17:44:44 +0000 (10:44 -0700)]
common: Move functions for loading from fat/ext2 to fs.h

These are filesystem functions and belong in the filesystem header file.
Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move do_tftpb() to net.h
Simon Glass [Sat, 28 Dec 2019 17:44:43 +0000 (10:44 -0700)]
common: Move do_tftpb() to net.h

This function belongs in the network header file. Move it.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move embedded fdt location to fdtdec.h
Simon Glass [Sat, 28 Dec 2019 17:44:42 +0000 (10:44 -0700)]
common: Move embedded fdt location to fdtdec.h

These declarations are only used in fdtdec.c so move them to its header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Drop checkflash() and checkdram()
Simon Glass [Sat, 28 Dec 2019 17:44:41 +0000 (10:44 -0700)]
common: Drop checkflash() and checkdram()

These functions are not used in U-Boot. Drop them.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move flash_perror() to flash.h
Simon Glass [Sat, 28 Dec 2019 17:44:40 +0000 (10:44 -0700)]
common: Move flash_perror() to flash.h

This function belongs more in flash.h than common.h so move it.

Also remove the space before the bracket in some calls.

Signed-off-by: Simon Glass <sjg@chromium.org>
4 years agocommon: Move main_loop() to init.h
Simon Glass [Sat, 28 Dec 2019 17:44:39 +0000 (10:44 -0700)]
common: Move main_loop() to init.h

Move this function out of common.h and into a better place.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
4 years agocommon: Drop mdm_init()
Simon Glass [Sat, 28 Dec 2019 17:44:38 +0000 (10:44 -0700)]
common: Drop mdm_init()

This is not used in U-Boot. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
4 years agoMerge branch '2020-01-17-improve-aes-support'
Tom Rini [Fri, 17 Jan 2020 18:23:32 +0000 (13:23 -0500)]
Merge branch '2020-01-17-improve-aes-support'

- Add support and tests for AES192 and AES256

4 years agou-boot: fit: add support to decrypt fit with aes
Philippe Reynes [Wed, 18 Dec 2019 17:25:42 +0000 (18:25 +0100)]
u-boot: fit: add support to decrypt fit with aes

This commit add to u-boot the support to decrypt
fit image encrypted with aes. The FIT image contains
the key name and the IV name. Then u-boot look for
the key and IV in his device tree and decrypt images
before moving to the next stage.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
4 years agomkimage: fit: add support to encrypt image with aes
Philippe Reynes [Wed, 18 Dec 2019 17:25:41 +0000 (18:25 +0100)]
mkimage: fit: add support to encrypt image with aes

This commit add the support of encrypting image with aes
in mkimage. To enable the ciphering, a node cipher with
a reference to a key and IV (Initialization Vector) must
be added to the its file. Then mkimage add the encrypted
image to the FIT and add the key and IV to the u-boot
device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
4 years agoaes: add test unit for aes196 and aes256
Philippe Reynes [Mon, 6 Jan 2020 14:22:37 +0000 (15:22 +0100)]
aes: add test unit for aes196 and aes256

This commit add test unit for aes196 and aes256.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agoaes: add test unit for aes128
Philippe Reynes [Mon, 6 Jan 2020 14:22:36 +0000 (15:22 +0100)]
aes: add test unit for aes128

This commit add test unit for aes128.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agoaes: add support of aes192 and aes256
Philippe Reynes [Mon, 6 Jan 2020 14:22:35 +0000 (15:22 +0100)]
aes: add support of aes192 and aes256

Until now, we only support aes128. This commit add the support
of aes192 and aes256.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agoaes: add a define for the size of a block
Philippe Reynes [Mon, 6 Jan 2020 14:22:34 +0000 (15:22 +0100)]
aes: add a define for the size of a block

In the code, we use the size of the key for the
size of the block. It's true when the key is 128 bits,
but it become false for key of 192 bits and 256 bits.
So to prepare the support of aes192  and 256,
we introduce a constant for the iaes block size.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agoMerge tag 'mmc-1-16-2020' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
Tom Rini [Thu, 16 Jan 2020 18:20:51 +0000 (13:20 -0500)]
Merge tag 'mmc-1-16-2020' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc

- Cleanup of fsl_esdhc driver together with arch/defconfig change
- Add quirk for APP_CMD retry

4 years agoMerge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
Tom Rini [Thu, 16 Jan 2020 17:52:07 +0000 (12:52 -0500)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell

- Clearfog: Fix SD booting (Baruch)
- Misc updates to MMC handling in SPL to support booting from
  main data partition (vs hardware boot partition) on MVEBU (Baruch)

4 years agoMerge tag 'xilinx-for-v2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot...
Tom Rini [Thu, 16 Jan 2020 14:45:40 +0000 (09:45 -0500)]
Merge tag 'xilinx-for-v2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx/FPGA changes for v2020.04

ARM64:
- Add INIT_SPL_RELATIVE dependency

SPL:
- FIT image fix
- Enable customization of bl2_plat_get_bl31_params()

Pytest:
- Add test for octal/hex conversions

Microblaze:
- Fix manual relocation for one SPI instance

Nand:
- Convert zynq/zynqmp drivers to DM

Xilinx:
- Enable boot script location via Kconfig
- Support OF_SEPARATE in board FDT selection
- Remove low level uart setup it is done later by code
- Add support for DEVICE_TREE variable passing for SPL

Zynq:
- Enable jtag boot mode via distro boot
- Removing unused baseaddresses from hardware.h
- DT fixups

ZynqMP:
- Fix emmc boot sequence
- Simplify spl logic around bss and board_init_r()
- Support psu_post_config_data() calling
- Tune mini-nand DTS
- Fix psu wiring for a2197 boards
- Add runtime MMC device boot order filling in spl
- Clear ATF handoff handling with custom bl2_plat_get_bl31_params()
- Add support u-boot.its generation
- Use single image configuration for all platforms
- Enable PANIC_HANG via Kconfig
- DT fixups
- Firmware fixes
- Add support for zcu208 and zcu1285

Versal:
- Fix emmc boot sequence
- Enable board_late_init() by default

4 years agoMerge branch '2020-01-15-master-imports'
Tom Rini [Thu, 16 Jan 2020 14:40:09 +0000 (09:40 -0500)]
Merge branch '2020-01-15-master-imports'

- MediaTek improvements
- Some generic clk improvements
- A few assorted bugfixes

4 years agoconfigs: mediatek: fix mt7623n bpir2 defconfig
Sam Shih [Fri, 10 Jan 2020 08:30:35 +0000 (16:30 +0800)]
configs: mediatek: fix mt7623n bpir2 defconfig

This patch add CONFIG_TARGET_MT7623 into mt7623n_bpir2_defconfig
to fix the mt7623 compile error after building others mediatek target
platform

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
4 years agoarm: dts: mediatek: move u-boot properties to -u-boot.dtsi file
Sam Shih [Fri, 10 Jan 2020 08:30:34 +0000 (16:30 +0800)]
arm: dts: mediatek: move u-boot properties to -u-boot.dtsi file

This patch move u-boot properties to -u-boot.dtsi file.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
4 years agoAdd support for MT7622 reference board
Sam Shih [Fri, 10 Jan 2020 08:30:33 +0000 (16:30 +0800)]
Add support for MT7622 reference board

This adds a general board file based on MT7622 SoCs from MediaTek.
This commit is adding the basic boot support for the MT7622 rfb.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
4 years agommc: add mmc and sd support for MT7622
Sam Shih [Fri, 10 Jan 2020 08:30:32 +0000 (16:30 +0800)]
mmc: add mmc and sd support for MT7622

This patch add mmc and sd support for Mediatek MT7622 SoCs

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
4 years agopower: domain: add power domain support for MT7622
Sam Shih [Fri, 10 Jan 2020 08:30:31 +0000 (16:30 +0800)]
power: domain: add power domain support for MT7622

This patch add power domain support for Mediatek MT7622 SoCs

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
4 years agoclk: mediatek: fix clock-rate overflow problem
Sam Shih [Fri, 10 Jan 2020 08:30:30 +0000 (16:30 +0800)]
clk: mediatek: fix clock-rate overflow problem

This patch fix clock-rate overflow problem in mediatek
clock driver common part.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
4 years agoclk: mediatek: add driver for MT7622
Sam Shih [Fri, 10 Jan 2020 08:30:29 +0000 (16:30 +0800)]
clk: mediatek: add driver for MT7622

This patch add clock driver for MediaTek MT7622 SoC.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
4 years agopinctrl: mediatek: add support for different pinctrl
Sam Shih [Fri, 10 Jan 2020 08:30:28 +0000 (16:30 +0800)]
pinctrl: mediatek: add support for different pinctrl

Due to the pinctrl hardware of MT7622 is difference from others
SoC which using the common part of mediatek pinctrl.
So we need to modify the common part of mediatek pinctrl.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
4 years agopinctrl: mediatek: add driver for MT7622
Sam Shih [Fri, 10 Jan 2020 08:30:27 +0000 (16:30 +0800)]
pinctrl: mediatek: add driver for MT7622

This patch add Pinctrl driver for MediaTek MT7622 SoC.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
4 years agoARM: MediaTek: Add support for MediaTek MT7622 SoC
Sam Shih [Fri, 10 Jan 2020 08:30:26 +0000 (16:30 +0800)]
ARM: MediaTek: Add support for MediaTek MT7622 SoC

Add support for MediaTek MT7622 SoC. This include the file
that will initialize the SoC after boot and its device tree.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
4 years agophy: phy-mtk-tphy: make ref clock optional
Chunfeng Yun [Thu, 9 Jan 2020 03:35:10 +0000 (11:35 +0800)]
phy: phy-mtk-tphy: make ref clock optional

If make the ref clock optional, no need refer to fixed-clock when
the ref clock is always on or comes from oscillator directly.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
4 years agophy: phy-mtk-tphy: remove the check of -ENOSYS
Chunfeng Yun [Thu, 9 Jan 2020 03:35:09 +0000 (11:35 +0800)]
phy: phy-mtk-tphy: remove the check of -ENOSYS

No need check -ENOSYS anymore after add dummy_enable() for
fixed-clock.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
4 years agoclk: fixed_rate: add dummy enable() function
Chunfeng Yun [Thu, 9 Jan 2020 03:35:08 +0000 (11:35 +0800)]
clk: fixed_rate: add dummy enable() function

This is used to avoid clk_enable() return -ENOSYS.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
4 years agoclk: add APIs to get (optional) clock by name without a device
Chunfeng Yun [Thu, 9 Jan 2020 03:35:07 +0000 (11:35 +0800)]
clk: add APIs to get (optional) clock by name without a device

Sometimes we may need get (optional) clock without a device,
that means use ofnode.
e.g. when the phy node has subnode, and there is no device created
for subnode, in this case, we need these new APIs to get subnode's
clock.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
4 years agoclk: check valid clock by clk_valid()
Chunfeng Yun [Thu, 9 Jan 2020 03:35:06 +0000 (11:35 +0800)]
clk: check valid clock by clk_valid()

Add valid check for clk->dev, it's useful when get optional
clock even when the clk point is valid, but its dev will be
NULL.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
4 years agoclk: fix error check for devm_clk_get_optional()
Chunfeng Yun [Thu, 9 Jan 2020 03:35:05 +0000 (11:35 +0800)]
clk: fix error check for devm_clk_get_optional()

If skip all return error number, it may skip some real error cases,
so only skip the error when the clock is not provided in DTS

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
4 years agoclk: mediatek: mt7629: add support for ssusbsys
Chunfeng Yun [Thu, 9 Jan 2020 03:35:04 +0000 (11:35 +0800)]
clk: mediatek: mt7629: add support for ssusbsys

The SSUSB IP's clocks come from ssusbsys module on mt7629,
so add its driver

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
4 years agoARM: MediaTek: add basic support for MT8512 boards
mingming lee [Tue, 31 Dec 2019 03:29:26 +0000 (11:29 +0800)]
ARM: MediaTek: add basic support for MT8512 boards

This adds a general board file based on MT8512 SoCs from MediaTek.

Apart from the generic parts (cpu) we add some low level init codes
and initialize the early clocks.

This commit is adding the basic boot support for the MT8512 eMMC board.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
4 years agommc: mtk-sd: fix hang when data read quickly
mingming lee [Tue, 31 Dec 2019 03:29:25 +0000 (11:29 +0800)]
mmc: mtk-sd: fix hang when data read quickly

For CMD21 tuning data, the 128/64 bytes data may coming in very
short time, before msdc_start_data(), the read data has already
come, in this case, clear MSDC_INT will cause the interrupt disappear
and lead to the thread hang.

the solution is just clear all interrupts before command was sent.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
4 years agommc: mtk-sd: add support for MediaTek MT8512/MT8110 SoCs
mingming lee [Tue, 31 Dec 2019 03:29:24 +0000 (11:29 +0800)]
mmc: mtk-sd: add support for MediaTek MT8512/MT8110 SoCs

This patch adds mmc support for MediaTek MT8512/MT8110 SoCs.
MT8512/MT8110 SoCs puts the tune register at top layer, so
need add new code to support it.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
4 years agopinctrl: mediatek: add driver for MT8512
mingming lee [Tue, 31 Dec 2019 03:29:23 +0000 (11:29 +0800)]
pinctrl: mediatek: add driver for MT8512

Add Pinctrl driver for MediaTek MT8512 SoC.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
4 years agoclk: mediatek: add configurable pcw_chg_reg/ibits/fmin to mtk_pll
mingming lee [Tue, 31 Dec 2019 03:29:22 +0000 (11:29 +0800)]
clk: mediatek: add configurable pcw_chg_reg/ibits/fmin to mtk_pll

Add configurable pcw_chg_reg/ibits/fmin to mtk_pll to support mt8512

4 years agoclk: mediatek: add set_clr_upd mux type flow
mingming lee [Tue, 31 Dec 2019 03:29:21 +0000 (11:29 +0800)]
clk: mediatek: add set_clr_upd mux type flow

Add new set_clr_upd mux type and related operation to
mtk common clock driver to support mt8512

4 years agoclk: mediatek: add driver support for MT8512
mingming lee [Tue, 31 Dec 2019 03:29:20 +0000 (11:29 +0800)]
clk: mediatek: add driver support for MT8512

Add clock driver for MediaTek MT8512 SoC, include topckgen,
apmixedsys and infracfg support.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
4 years agoARM: MediaTek: Add support for MediaTek MT8512 SoC
mingming lee [Tue, 31 Dec 2019 03:29:19 +0000 (11:29 +0800)]
ARM: MediaTek: Add support for MediaTek MT8512 SoC

Add support for MediaTek MT8512 SoC. This include the file
that will initialize the SoC after boot and its device tree.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
4 years agoMAINTAINERS: Fix mail
Sam Protsenko [Tue, 14 Jan 2020 17:54:12 +0000 (19:54 +0200)]
MAINTAINERS: Fix mail

Sam doesn't work for Linaro anymore, so Linaro mail is not valid. Change
it to his home mail instead.

Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
4 years agocmd/blk_common: clarify no partition error message
Alexandre Besnard [Fri, 20 Dec 2019 14:25:22 +0000 (15:25 +0100)]
cmd/blk_common: clarify no partition error message

When no partition table is found, users should be warned so.
Warning that no device is available in this case could be misleading,
especially as it is the same error when no device is selected.

Signed-off-by: Alexandre Besnard <alexandre.besnard@softathome.com>
4 years agoarm: mvebu: clearfog: update eMMC documentation
Baruch Siach [Wed, 15 Jan 2020 07:08:10 +0000 (09:08 +0200)]
arm: mvebu: clearfog: update eMMC documentation

SPL now automatically selects the correct U-Boot image offset for both
eMMC and SD card. No need to tweak
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR anymore.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
4 years agoarm: mvebu: clearfog: set uboot image SD card offset
Baruch Siach [Wed, 15 Jan 2020 07:08:09 +0000 (09:08 +0200)]
arm: mvebu: clearfog: set uboot image SD card offset

Armada 38x ROM skips the first SD card offset when loading SPL. This
affects the location of the main U-Boot image. SPL MMC code now supports
U-Boot image offset based on run-time detection of the boot partition.
Use this feature to make the same generated image support both SD card
and eMMC boot partition.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
4 years agospl: mmc: support uboot image offset on main partition
Baruch Siach [Wed, 15 Jan 2020 07:08:08 +0000 (09:08 +0200)]
spl: mmc: support uboot image offset on main partition

On Armada 38x platforms the ROM code loads SPL from offset 0 of eMMC
hardware boot partitions. When there are no boot partitions (i.e. SD
card) the ROM skips the first sector that usually contains the (logical)
partition table. Since the generated .kwb image contains the main U-Boot
image in a fixed location (0x140 sectors by default), we end up with the
main U-Boot image in offset of 1 sector. The current workaround is to
manually set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x141 to
compensate for that.

This patch uses the run-time detected boot partition to determine the
right offset of the main U-Boot partition. The generated .kwb image is
now compatible with both eMMC boot partition, and SD card main data
partition.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
4 years agoconfigs: clearfog: enable SPL_DM_GPIO to fix boot from SD
Baruch Siach [Sun, 8 Dec 2019 07:41:41 +0000 (09:41 +0200)]
configs: clearfog: enable SPL_DM_GPIO to fix boot from SD

SPL needs DM GPIO to read the SD card-detect signal. This complements
the fix in commit 70bae02f71d4 ("arm: mvebu: clearfog: fix boot from SD
card").

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
4 years agommc: config help typo fix
Joel Johnson [Sat, 11 Jan 2020 16:08:15 +0000 (09:08 -0700)]
mmc: config help typo fix

Fix typo in description of MMC_QUIRKS config option.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
4 years agommc: add additional quirk for APP_CMD retry
Joel Johnson [Sat, 11 Jan 2020 16:08:14 +0000 (09:08 -0700)]
mmc: add additional quirk for APP_CMD retry

It was observed (on ClearFog Base) that sending MMC APP_CMD returned
an error on the first attempt. The issue appears to be timing related
since even inserting a puts() short debug entry before the execution
added sufficient delay to receive success on first attempt.

Follow the existing quirks pattern to retry if initial issuance
failed so as to not introduce any delay unless needed.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
4 years agoDrop CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK usage
Yangbo Lu [Thu, 19 Dec 2019 10:59:30 +0000 (18:59 +0800)]
Drop CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK usage

The eSDHC reference clocks should be provided by speed.c in arch/.
And we do not need CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK option to
select which clock to use. Because we can make the driver to select
the periperhal clock which is better (provides higher frequency)
automatically if its value is provided by speed.c.

This patch is to drop this option and make driver to select clock
automatically. Also fix peripheral clock calculation issue in
fsl_lsch2_speed.c/fsl_lsch3_speed.c.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
4 years agoconfigs: ls1028a: use default SDHC clock divider value
Yangbo Lu [Thu, 16 Jan 2020 05:19:44 +0000 (13:19 +0800)]
configs: ls1028a: use default SDHC clock divider value

The SDHC clock divider value for LS1028A should be default 2,
not 1.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
4 years agoAdd global variable sdhc_per_clk for arm/powerpc
Yangbo Lu [Thu, 19 Dec 2019 10:59:28 +0000 (18:59 +0800)]
Add global variable sdhc_per_clk for arm/powerpc

The QorIQ eSDHC controller supports two reference clocks. They are
platform clock and periperhal clock. The global variable sdhc_clk
has already been used for platform clock.
This patch is to add another global variable sdhc_per_clk for
periperhal clock, which provides higher frequency and is required
to be used for SD UHS and eMMC HS200/HS400 speed modes.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
4 years agopowerpc/mpc85xx: drop eSDHC periperhal clock code
Yangbo Lu [Thu, 19 Dec 2019 10:59:27 +0000 (18:59 +0800)]
powerpc/mpc85xx: drop eSDHC periperhal clock code

The below patch added eSDHC periperhal clock code initially.
2d9ca2c mmc: fsl_esdhc: Add peripheral clock support

The purpose was to fix up device tree properties "peripheral-frequency"
so that linux could get the periperhal clock by it.
However the implementation on both u-boot and linux was only
for a Freescale SDK release. The linux part implementation had never
been upstreamed. These code should not have been exist on u-boot
mainline.

Let's remove the powerpc part changes but keep the changes in
fsl_esdhc driver. The changes in fsl_esdhc driver could be utilized
to support SD UHS and eMMC HS200/HS400 speed modes for current
Layerscape ARM platforms.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
4 years agommc: fsl_esdhc: drop useless fdt fixup
Yangbo Lu [Thu, 19 Dec 2019 10:59:26 +0000 (18:59 +0800)]
mmc: fsl_esdhc: drop useless fdt fixup

The fdt fixup for properties "peripheral-frequency" and "adapter-type"
was once for a Freescale SDK release. The properties haven't been existed
in linux mainline. Drop these useless code.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
4 years agommc: fsl_esdhc_imx: drop QorIQ eSDHC specific peripheral clock code
Yangbo Lu [Thu, 19 Dec 2019 10:59:25 +0000 (18:59 +0800)]
mmc: fsl_esdhc_imx: drop QorIQ eSDHC specific peripheral clock code

Drop QorIQ eSDHC specific peripheral clock code.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
4 years agotest/py: use valid device tree in test_fit.py
Heinrich Schuchardt [Wed, 18 Dec 2019 10:05:59 +0000 (11:05 +0100)]
test/py: use valid device tree in test_fit.py

The device tree compiler expects that a node with a unit-address has a reg
property.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agoAdd dependencies for MALLOC_F and OF_LIBFDT
Sean Anderson [Wed, 18 Dec 2019 02:40:09 +0000 (21:40 -0500)]
Add dependencies for MALLOC_F and OF_LIBFDT

Some features implicitly depended on MALLOC_F and OF_LIBFDT and would
fail at link-time if these features were not enabled.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
4 years agoInclude missing headers for asm-generic/sections.h
Sean Anderson [Wed, 18 Dec 2019 02:22:42 +0000 (21:22 -0500)]
Include missing headers for asm-generic/sections.h

asm-generic/sections.h references ulong but does not include
linux/types.h

Signed-off-by: Sean Anderson <seanga2@gmail.com>
4 years agodma: Add stub of dma_memcpy and dma_get_device
Vignesh Raghavendra [Fri, 15 Nov 2019 11:30:42 +0000 (17:00 +0530)]
dma: Add stub of dma_memcpy and dma_get_device

Add stub for dma_memcpy() and dma_get_device when CONFIG_DMA is
disabled. This avoids ifdefs in driver code using DMA APIs

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agoKconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA
Vignesh Raghavendra [Fri, 15 Nov 2019 11:30:41 +0000 (17:00 +0530)]
Kconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA

Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA. This allows to use
macros such as CONFIG_IS_ENABLED() that allow conditional compilation of
code for SPL and U-Boot.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agoMerge tag 'efi-2020-04-rc1-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Tom Rini [Wed, 15 Jan 2020 17:29:23 +0000 (12:29 -0500)]
Merge tag 'efi-2020-04-rc1-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-04-rc1-2

Bug fixes for the UEFI sub-system are provided:

* imply VIDEO_ANSI for correct cursor positioning and colors
* fix issues in the UEFI block device driver
* add missing documentation

4 years agoMerge tag 'u-boot-imx-20200115' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx
Tom Rini [Wed, 15 Jan 2020 14:22:15 +0000 (09:22 -0500)]
Merge tag 'u-boot-imx-20200115' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

-----------------------------------
- imx8:
add capricorn giedi deneb boards
- imx6:
fixed fow wandboard
- imx7: DM_ETHER for pico-imx7d
- fsl_esdhc_imx: add broken-cd property
- New SOC: IMXRT10xx

Travis:
https://travis-ci.org/sbabic/u-boot-imx/builds/637126531

4 years agoMerge branch 'master' of git://git.denx.de/u-boot-tegra
Tom Rini [Wed, 15 Jan 2020 02:48:32 +0000 (21:48 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-tegra

- Important bugfix for some Tegra platforms

4 years agoefi_loader: imply VIDEO_ANSI
Heinrich Schuchardt [Tue, 14 Jan 2020 23:49:35 +0000 (00:49 +0100)]
efi_loader: imply VIDEO_ANSI

UEFI programs like GRUB make change terminal colors which requires support
for ANSI escape sequences.

Let CONFIG_EFI_LOADER=y imply CONFIG_VIDEO_ANSI.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
4 years agoefi_driver: debug output efi_uc_start, efi_uc_stop
Heinrich Schuchardt [Fri, 10 Jan 2020 11:33:16 +0000 (12:33 +0100)]
efi_driver: debug output efi_uc_start, efi_uc_stop

Use the correct printf codes for the debug output in efi_uc_start() and
efi_uc_stop().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
4 years agoefi_driver: fix efi_uc_stop()
Heinrich Schuchardt [Thu, 9 Jan 2020 22:26:43 +0000 (23:26 +0100)]
efi_driver: fix efi_uc_stop()

Use the correct protocol in efi_uc_stop() when detaching the driver from
the controller.

Change the block IO unit test for the block device driver to throw an error
instead of a todo if teardown fails.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
4 years agoefi_selftest: enable CONFIG_CMD_POWEROFF
Heinrich Schuchardt [Sat, 11 Jan 2020 09:59:08 +0000 (10:59 +0100)]
efi_selftest: enable CONFIG_CMD_POWEROFF

For automating testing we should be able to power off the test system.
The implementation of EFI_RESET_SHUTDOWN requires the do_poweroff()
function which is only available if CONFIG_CMD_POWEROFF=y.

Enable CONFIG_CMD_POWEROFF if PSCI reset is available.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
4 years agoefi_loader: describe returning of control
Heinrich Schuchardt [Fri, 10 Jan 2020 21:06:54 +0000 (22:06 +0100)]
efi_loader: describe returning of control

Provide a sober description of how control can be returned by a UEFI
binary.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
4 years agoefi_loader: document functions in efi_rng.c
Heinrich Schuchardt [Thu, 9 Jan 2020 19:49:44 +0000 (20:49 +0100)]
efi_loader: document functions in efi_rng.c

Add the missing Sphinx documentation.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
4 years agoimx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVK
Giulio Benetti [Fri, 10 Jan 2020 14:51:48 +0000 (15:51 +0100)]
imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVK

This commit adds board support for i.MXRT1050-EVK from NXP. This board
is an evaluation kit provided by NXP for i.MXRT105x processor family.

More information about this board can be found here:
https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK

The initial supported/tested devices include:
- Debug serial
- SD

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>