binman: Add support for Intel FSP meminit
[oweals/u-boot.git] / arch /
2019-10-08 Peng Fanimx8m: add image cfg for i.MX8MM lpddr4
2019-10-08 Frieder Schrempfimx: mkimage_fit_atf: Fix FIT image for correct boot...
2019-10-08 Stefan RoeseARM: imx: arch/arm/mach-imx/spl_qspi.cfg
2019-10-08 Stefan RoeseARM: imx: Add QSPI boot mode for i.MX6UL/ULL
2019-10-08 Breno Matheus Limaimx: Kconfig: Reduce default CONFIG_CSF_SIZE
2019-10-08 Patrick Wildtimx: add the i.MX8M reset controller node
2019-10-08 Patrick Wildtimx: add support for i.MX8MQ power domain controller
2019-10-08 Parthiban NallathambiARM: dts: pcl063: add usdhc reset pin of eMMC
2019-10-08 Anatolij Gustschinimx: wandboard: convert FEC support to DM_ETH
2019-10-08 Lukasz Majewskidts: imx28: Remove #include "imx28.dtsi" from imx28...
2019-10-08 Lukasz Majewskiimx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC...
2019-10-08 Lukasz MajewskiDM: WDT: Convert WDT driver to use DM/DTS (including...
2019-10-08 Lukasz MajewskiDM: SPI: Convert display5 to use SPI with DM/DTS (but...
2019-10-08 Lukasz MajewskiDM: eth: Switch display5 board to use DM_ETH
2019-10-08 Lukasz MajewskiDM: mmc: Switch display5 board to use DM_MMC and BLK...
2019-10-08 Lukasz MajewskiDM: I2C: Switch display5 board to use DM_I2C
2019-10-08 Fabio Estevampico-imx6: Add initial support
2019-10-08 Fabio Estevammx6: clock: Allow enable_ipu_clock() to be built for...
2019-10-08 Joris Offougaconfigs: pico-imx7d: Convert to DM_VIDEO
2019-10-08 Joris OffougaARM: dts: pico-imx7d: sync device tree with v5.3-rc6
2019-10-08 Joris OffougaARM: dts: pico-imx7d: Add u-boot.dtsi for uboot specifi...
2019-10-08 Peng Fanimx8: cpu: fix mac fuse word for i.MX8QM
2019-10-08 Peng Fanimx8: move i.MX8 cpu desc code to drivers/cpu/imx8_cpu.c
2019-10-08 Peng Fanimx: scu_api: add sc_pm_is_partition_started
2019-10-08 Peng Fanimx8: fdt: add optee node
2019-10-08 Peng Fanimx8: save args passed from ATF
2019-10-08 Peng Fanimx8: fdt: configure sid for masters
2019-10-08 Peng Fanimx: scu_api: add sc_rm_set_master_sid
2019-10-08 Peng Fanimx8: disable node when the resource is not owned
2019-10-08 Peng Fanimx8qm: power up SMMU
2019-10-08 Peng Fanimx: sys_proto: add is_imx8qm helper
2019-10-08 Ye Liimx8: Probe the SCU driver by using uclass function
2019-10-08 Peng Fanimx: add container target
2019-10-08 Peng Fanimx8: support parsing i.MX8 Container file
2019-10-08 Peng Fanimx: imx6qdl: dtsi: move U-Boot specific change to...
2019-10-08 Breno Matheus LimaKconfig: Migrate CONFIG_CSF_SIZE to Kconfig
2019-10-08 Ye Lii.MX7ULP: Change clock rate calculation for NIC1 BUS...
2019-10-08 Ye Lii.MX7ULP: Set A7 core frequency to 500Mhz for B0 chip
2019-10-08 Peng Fani.MX7ULP: Add CPU revision check for B0
2019-10-08 Ye Lii.MX7ULP: Workaround APLL PFD2 to 345.6Mhz
2019-10-08 Ye Lii.MX7ULP: Fix SPLL/APLL clock rate calculation issue
2019-10-08 Ye Lii.MX7ULP: Fix wrong i2c configuration name
2019-10-08 Ye Lii.MX7ULP: Add CONFIG_MX7ULP to kconfig
2019-10-08 Ye Lii.MX7ULP: Fix PCC register bits mask and offset issue
2019-10-08 Bai Pingi.MX7ULP: Correct the clock index
2019-10-08 Bai Pingi.MX7ULP: Fix system reset after a7 rtc alarm expired.
2019-10-08 Peng Fanimx: i.MX7ULP: add get_boot_device
2019-10-08 Troy Kiskynitrogen6x: migrate to using device tree
2019-10-08 Robert HancockARM: imx: Support larger SPL size on IMX6DQ
2019-10-08 Ricardo Salvetispl: imx: only use HAB if spl fit signature is not...
2019-10-08 Ricardo Salvetiimx: apalis_imx6: select MX6Q via Kconfig
2019-10-08 Peng Fanarm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to...
2019-10-08 Peng Fanspl: pass args to board_return_to_bootrom
2019-10-08 Peng Fanimx: mx6ul_14x14_evk: convert to DM_VIDEO
2019-10-08 Peng Fanimx: add i.MX6ULZ board
2019-10-08 Peng Fanimx: add i.MX6ULZ cpu type
2019-10-08 Peng Fanarm: dts: import dts for i.MX6ULZ
2019-10-08 Peng Fanarm: dts: sync dts for i.MX6ULL
2019-10-08 Peng Fanarm: dts: sync dts for i.MX6UL
2019-10-08 Ibai Erkiagaarm64: versal: Move common board dtb search
2019-10-08 Michal Simekarm64: zynqmp: Use mailbox driver for PMUFW config...
2019-10-08 Ibai Erkiagaarm64: zynqmp: probe firmware driver
2019-10-08 Ibai Erkiagaarm64: zynqmp: remove old fw version function
2019-10-08 Ibai Erkiagafirmware: zynqmp: create firmware header
2019-10-08 Michal Simekarm64: zynqmp: Cleanup PM SMC macro composition
2019-10-08 Ibai Erkiagaarm64: zynqmp: add firmware and mailbox node to DT
2019-10-08 Ibai Erkiagafirmware: zynqmp: Add zynqmp-power support
2019-10-08 Ibai Erkiagamailbox: zynqmp: ipi mailbox driver
2019-10-08 Michal Simekmicroblaze: Setup initrd_high and fdt_high at run time
2019-10-08 Michal Simekmicroblaze: Switch to generic bootm implementation
2019-10-08 Michal Simekmicroblaze: Define arch_lmb_reserve
2019-10-08 Michal Simekmicroblaze: Move CONFIG_LMB from board file to config.h
2019-10-08 Michal Simekarm64: zynqmp: Add a2197 memory board revA
2019-10-08 Michal Simekarm64: zynqmp: Add System Controller for a2197-g/p
2019-10-08 Michal Simekarm64: zynqmp: Add generic a2197 system controller...
2019-10-08 Michal Simekarm64: zynqmp: Switch spi-flash to jedec, spi-nor compa...
2019-10-08 Vipul KumarARM: zynq: dts: Added alias for usb node
2019-10-08 Michal SimekARM: zynq: Align model name with DT
2019-10-08 Siva Durga Prasad... clk: versal: Add clock driver support
2019-10-08 Michal Simekarm64: zynqmp: Provide a Kconfig option to disable...
2019-10-08 Michal Simekarm64: versal: Enable memory mapping via DT
2019-10-08 T Karthik Reddyarm64: zynqmp: Set initrd_high to as high as possible
2019-10-08 Siva Durga Prasad... arm64: versal: Set initrd_high to as high as possible
2019-10-08 Siva Durga Prasad... arm64: versal: Define board_late_init for versal
2019-10-08 Michal Simekarm64: zynqmp: Add u-boot,dm-pre-reloc to clk300 node
2019-10-08 Eugen HristevARM: dts: at91: sam9x60ek: add onewire support
2019-10-08 Eugen HristevARM: dts: at91: sam9x60: add onewire node
2019-10-08 Tudor AmbarusARM: dts: at91: sam9x60ek: Enable qspi node
2019-10-08 Tudor AmbarusARM: at91: Add SFR definitions
2019-10-08 Tudor AmbarusARM: at91: Rename sama5_sfr.h to at91_sfr.h
2019-10-08 Sandeep Sheriker... board: atmel: Add sam9x60ek board
2019-10-08 Nicolas FerreARM: dts: at91: sam9x60: Add macb0 Ethernet controller
2019-10-08 Sandeep Sheriker... ARM: dts: Add dts files for sam9x60ek
2019-10-08 Sandeep Sheriker... ARM: at91: Add sam9x60 soc
2019-10-08 Eugen HristevARM: dts: at91: sama5d27_wlsom1: add hlcdc node
2019-10-08 Eugen HristevARM: dts: at91: sama5d27_wlsom1_ek: add support for...
2019-10-08 Eugen HristevARM: dts: at91: sama5d2: add seq for qspi1
2019-10-08 Eugen Hristevboard: atmel: sama5d2_wlsom1_ek: add SPL support
2019-10-08 Eugen HristevARM: at91: mpddrc: add lpddr2 initialization procedure
2019-10-08 Eugen Hristevboard: laird: wb50n: use configure_ddrcfg_input_buffers
next