static int global_ret;
/**
- * Handle to ongoing autoconfiguration.
- */
-static struct GNUNET_NAT_AutoHandle *ah;
-
-/**
- * Name of section in configuration file to use for
+ * Name of section in configuration file to use for
* additional options.
- */
+ */
static char *section_name;
/**
*/
static int use_tcp;
-/**
- * If we do auto-configuration, should we write the result
- * to a file?
- */
-static int write_cfg;
-
-/**
- * Configuration filename.
- */
-static const char *cfg_file;
-
-/**
- * Original configuration.
- */
-static const struct GNUNET_CONFIGURATION_Handle *cfg;
-
/**
* Protocol to use.
*/
static uint8_t proto;
-/**
- * Address we are bound to (in test), or should bind to
- * (if #do_stun is set).
- */
-static char *bind_addr;
-
-/**
- * External IP address and port to use for the test.
- * If not set, use #bind_addr.
- */
-static char *extern_addr;
-
/**
* Local address to use for connection reversal request.
*/
/**
* Should we actually bind to #bind_addr and receive and process STUN requests?
*/
-static unsigned int do_stun;
-
-/**
- * Should we run autoconfiguration?
- */
-static unsigned int do_auto;
-
-/**
- * Handle to a NAT test operation.
- */
-static struct GNUNET_NAT_Test *nt;
+static int do_stun;
/**
* Handle to NAT operation.
/**
* Listen socket for STUN processing.
- */
+ */
static struct GNUNET_NETWORK_Handle *ls;
/**
static void
test_finished ()
{
- if (NULL != ah)
- return;
- if (NULL != nt)
- return;
if (NULL != nh)
return;
if (NULL != rtask)
}
-/**
- * Function to iterate over sugested changes options
- *
- * @param cls closure
- * @param section name of the section
- * @param option name of the option
- * @param value value of the option
- */
-static void
-auto_conf_iter (void *cls,
- const char *section,
- const char *option,
- const char *value)
-{
- struct GNUNET_CONFIGURATION_Handle *new_cfg = cls;
-
- PRINTF ("%s: %s\n",
- option,
- value);
- if (NULL != new_cfg)
- GNUNET_CONFIGURATION_set_value_string (new_cfg,
- section,
- option,
- value);
-}
-
-
-/**
- * Function called with the result from the autoconfiguration.
- *
- * @param cls closure
- * @param diff minimal suggested changes to the original configuration
- * to make it work (as best as we can)
- * @param result #GNUNET_NAT_ERROR_SUCCESS on success, otherwise the specific error code
- * @param type what the situation of the NAT
- */
-static void
-auto_config_cb (void *cls,
- const struct GNUNET_CONFIGURATION_Handle *diff,
- enum GNUNET_NAT_StatusCode result,
- enum GNUNET_NAT_Type type)
-{
- const char *nat_type;
- char unknown_type[64];
- struct GNUNET_CONFIGURATION_Handle *new_cfg;
-
- ah = NULL;
- switch (type)
- {
- case GNUNET_NAT_TYPE_NO_NAT:
- nat_type = "NO NAT";
- break;
- case GNUNET_NAT_TYPE_UNREACHABLE_NAT:
- nat_type = "NAT but we can traverse";
- break;
- case GNUNET_NAT_TYPE_STUN_PUNCHED_NAT:
- nat_type = "NAT but STUN is able to identify the correct information";
- break;
- case GNUNET_NAT_TYPE_UPNP_NAT:
- nat_type = "NAT but UPNP opened the ports";
- break;
- default:
- SPRINTF (unknown_type,
- "NAT unknown, type %u",
- type);
- nat_type = unknown_type;
- break;
- }
-
- GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
- "NAT status: %s/%s\n",
- GNUNET_NAT_status2string (result),
- nat_type);
-
- /* Shortcut: if there are no changes suggested, bail out early. */
- if (GNUNET_NO ==
- GNUNET_CONFIGURATION_is_dirty (diff))
- {
- test_finished ();
- return;
- }
-
- /* Apply diff to original configuration and show changes
- to the user */
- new_cfg = write_cfg ? GNUNET_CONFIGURATION_dup (cfg) : NULL;
-
- if (NULL != diff)
- {
- GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
- _("Suggested configuration changes:\n"));
- GNUNET_CONFIGURATION_iterate_section_values (diff,
- "nat",
- &auto_conf_iter,
- new_cfg);
- }
-
- /* If desired, write configuration to file; we write only the
- changes to the defaults to keep things compact. */
- if ( (write_cfg) &&
- (NULL != diff) )
- {
- struct GNUNET_CONFIGURATION_Handle *def_cfg;
-
- GNUNET_CONFIGURATION_set_value_string (new_cfg,
- "ARM",
- "CONFIG",
- NULL);
- def_cfg = GNUNET_CONFIGURATION_create ();
- GNUNET_break (GNUNET_OK ==
- GNUNET_CONFIGURATION_load (def_cfg,
- NULL));
- if (GNUNET_OK !=
- GNUNET_CONFIGURATION_write_diffs (def_cfg,
- new_cfg,
- cfg_file))
- {
- GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
- _("Failed to write configuration to `%s'\n"),
- cfg_file);
- global_ret = 1;
- }
- else
- {
- GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
- _("Wrote updated configuration to `%s'\n"),
- cfg_file);
- }
- GNUNET_CONFIGURATION_destroy (def_cfg);
- }
-
- if (NULL != new_cfg)
- GNUNET_CONFIGURATION_destroy (new_cfg);
- test_finished ();
-}
-
-
-/**
- * Function called to report success or failure for
- * NAT configuration test.
- *
- * @param cls closure
- * @param result #GNUNET_NAT_ERROR_SUCCESS on success, otherwise the specific error code
- */
-static void
-test_report_cb (void *cls,
- enum GNUNET_NAT_StatusCode result)
-{
- nt = NULL;
- PRINTF ("NAT test result: %s\n",
- GNUNET_NAT_status2string (result));
- test_finished ();
-}
-
-
/**
* Signature of the callback passed to #GNUNET_NAT_register() for
* a function to call whenever our set of 'valid' addresses changes.
*
* @param cls closure, NULL
- * @param add_remove #GNUNET_YES to add a new public IP address,
+ * @param add_remove #GNUNET_YES to add a new public IP address,
* #GNUNET_NO to remove a previous (now invalid) one
* @param ac address class the address belongs to
* @param addr either the previous or the new public IP address
const struct sockaddr *addr,
socklen_t addrlen)
{
- GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
- "%s %s (%d)\n",
- add_remove ? "+" : "-",
- GNUNET_a2s (addr,
- addrlen),
- (int) ac);
+ fprintf (stdout,
+ "%s %s (%d)\n",
+ add_remove ? "+" : "-",
+ GNUNET_a2s (addr,
+ addrlen),
+ (int) ac);
}
static void
do_shutdown (void *cls)
{
- if (NULL != ah)
- {
- GNUNET_NAT_autoconfig_cancel (ah);
- ah = NULL;
- }
- if (NULL != nt)
- {
- GNUNET_NAT_test_stop (nt);
- nt = NULL;
- }
if (NULL != nh)
{
GNUNET_NAT_unregister (nh);
stun_read_task (void *cls)
{
ssize_t size;
-
+
rtask = GNUNET_SCHEDULER_add_read_net (GNUNET_TIME_UNIT_FOREVER_REL,
ls,
&stun_read_task,
struct sockaddr_storage sa;
socklen_t salen = sizeof (sa);
ssize_t ret;
-
+
ret = GNUNET_NETWORK_socket_recvfrom (ls,
buf,
size + 1,
const struct GNUNET_CONFIGURATION_Handle *c)
{
uint8_t af;
- struct sockaddr_in bind_sa;
- struct sockaddr_in extern_sa;
struct sockaddr *local_sa;
struct sockaddr *remote_sa;
socklen_t local_len;
size_t remote_len;
- cfg_file = cfgfile;
- cfg = c;
-
if (use_tcp && use_udp)
{
GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
GNUNET_SCHEDULER_add_shutdown (&do_shutdown,
NULL);
- if (do_auto)
- {
- ah = GNUNET_NAT_autoconfig_start (c,
- &auto_config_cb,
- NULL);
- }
-
if (0 == proto)
{
- if (do_auto)
- return; /* all good, we just run auto config */
GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
"Must specify either TCP or UDP\n");
global_ret = 1;
return;
}
- if (NULL != bind_addr)
- {
- if (GNUNET_OK !=
- GNUNET_STRINGS_to_address_ipv4 (bind_addr,
- strlen (bind_addr),
- &bind_sa))
- {
- GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
- "Invalid socket address `%s'\n",
- bind_addr);
- global_ret = 1;
- return;
- }
- }
- if (NULL != extern_addr)
- {
- if (GNUNET_OK !=
- GNUNET_STRINGS_to_address_ipv4 (extern_addr,
- strlen (extern_addr),
- &extern_sa))
- {
- GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
- "Invalid socket address `%s'\n",
- extern_addr);
- global_ret = 1;
- return;
- }
- }
+ local_len = 0;
+ local_sa = NULL;
+ remote_len = 0;
+ remote_sa = NULL;
if (NULL != local_addr)
{
local_len = (socklen_t) GNUNET_STRINGS_parse_socket_addr (local_addr,
GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
"Invalid socket address `%s'\n",
local_addr);
- global_ret = 1;
- return;
+ goto fail_and_shutdown;
}
}
+
if (NULL != remote_addr)
{
remote_len = GNUNET_STRINGS_parse_socket_addr (remote_addr,
GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
"Invalid socket address `%s'\n",
remote_addr);
- global_ret = 1;
- return;
+ goto fail_and_shutdown;
}
}
- if (NULL != bind_addr)
- {
- if (NULL == extern_addr)
- extern_sa = bind_sa;
- nt = GNUNET_NAT_test_start (c,
- proto,
- bind_sa.sin_addr,
- ntohs (bind_sa.sin_port),
- extern_sa.sin_addr,
- ntohs (extern_sa.sin_port),
- &test_report_cb,
- NULL);
- }
-
if (NULL != local_addr)
{
+ if (NULL == section_name)
+ section_name = GNUNET_strdup ("undefined");
nh = GNUNET_NAT_register (c,
section_name,
proto,
else if (listen_reversal)
{
GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
- "Use of `-W` only effective in combination with `-i`\n");
- global_ret = 1;
- GNUNET_SCHEDULER_shutdown ();
- return;
+ "Use of `-W` only effective in combination with `-i`\n");
+ goto fail_and_shutdown;
}
if (NULL != remote_addr)
{
int ret;
-
+
if ( (NULL == nh) ||
(sizeof (struct sockaddr_in) != local_len) )
{
GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
"Require IPv4 local address to initiate connection reversal\n");
- global_ret = 1;
- GNUNET_SCHEDULER_shutdown ();
- return;
+ goto fail_and_shutdown;
}
if (sizeof (struct sockaddr_in) != remote_len)
{
GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
"Require IPv4 reversal target address\n");
- global_ret = 1;
- GNUNET_SCHEDULER_shutdown ();
- return;
+ goto fail_and_shutdown;
}
+ GNUNET_assert (AF_INET == local_sa->sa_family);
+ GNUNET_assert (AF_INET == remote_sa->sa_family);
ret = GNUNET_NAT_request_reversal (nh,
- (const struct sockaddr_in *) &local_sa,
- (const struct sockaddr_in *) &remote_sa);
+ (const struct sockaddr_in *) local_sa,
+ (const struct sockaddr_in *) remote_sa);
switch (ret)
{
case GNUNET_SYSERR:
break;
}
}
-
+
if (do_stun)
{
if (NULL == local_addr)
{
GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
"Require local address to support STUN requests\n");
- global_ret = 1;
- GNUNET_SCHEDULER_shutdown ();
- return;
+ goto fail_and_shutdown;
}
if (IPPROTO_UDP != proto)
{
GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
"STUN only supported over UDP\n");
- global_ret = 1;
- GNUNET_SCHEDULER_shutdown ();
- return;
+ goto fail_and_shutdown;
}
ls = GNUNET_NETWORK_socket_create (af,
SOCK_DGRAM,
IPPROTO_UDP);
+ if (NULL == ls)
+ {
+ GNUNET_log (GNUNET_ERROR_TYPE_MESSAGE,
+ "Failed to create socket\n");
+ goto fail_and_shutdown;
+ }
if (GNUNET_OK !=
- GNUNET_NETWORK_socket_bind (ls,
- local_sa,
- local_len))
+ GNUNET_NETWORK_socket_bind (ls,
+ local_sa,
+ local_len))
{
GNUNET_log (GNUNET_ERROR_TYPE_ERROR,
"Failed to bind to %s: %s\n",
GNUNET_a2s (local_sa,
local_len),
STRERROR (errno));
- global_ret = 1;
- GNUNET_SCHEDULER_shutdown ();
- return;
+ goto fail_and_shutdown;
}
rtask = GNUNET_SCHEDULER_add_read_net (GNUNET_TIME_UNIT_FOREVER_REL,
ls,
&stun_read_task,
NULL);
}
-
+ GNUNET_free_non_null (remote_sa);
+ GNUNET_free_non_null (local_sa);
test_finished ();
+ return;
+ fail_and_shutdown:
+ global_ret = 1;
+ GNUNET_SCHEDULER_shutdown ();
+ GNUNET_free_non_null (remote_sa);
+ GNUNET_free_non_null (local_sa);
}
main (int argc,
char *const argv[])
{
- static const struct GNUNET_GETOPT_CommandLineOption options[] = {
- {'a', "auto", NULL,
- gettext_noop ("run autoconfiguration"),
- GNUNET_NO, &GNUNET_GETOPT_set_one, &do_auto },
- {'b', "bind", "ADDRESS",
- gettext_noop ("which IP and port are we bound to"),
- GNUNET_YES, &GNUNET_GETOPT_set_string, &bind_addr },
- {'e', "external", "ADDRESS",
- gettext_noop ("which external IP and port should be used to test"),
- GNUNET_YES, &GNUNET_GETOPT_set_string, &extern_addr },
- {'i', "in", "ADDRESS",
- gettext_noop ("which IP and port are we locally using to bind/listen to"),
- GNUNET_YES, &GNUNET_GETOPT_set_string, &local_addr },
- {'r', "remote", "ADDRESS",
- gettext_noop ("which remote IP and port should be asked for connection reversal"),
- GNUNET_YES, &GNUNET_GETOPT_set_string, &remote_addr },
- {'S', "section", NULL,
- gettext_noop ("name of configuration section to find additional options, such as manual host punching data"),
- GNUNET_YES, &GNUNET_GETOPT_set_string, §ion_name },
- {'s', "stun", NULL,
- gettext_noop ("enable STUN processing"),
- GNUNET_NO, &GNUNET_GETOPT_set_one, &do_stun },
- {'t', "tcp", NULL,
- gettext_noop ("use TCP"),
- GNUNET_NO, &GNUNET_GETOPT_set_one, &use_tcp },
- {'u', "udp", NULL,
- gettext_noop ("use UDP"),
- GNUNET_NO, &GNUNET_GETOPT_set_one, &use_udp },
- {'w', "write", NULL,
- gettext_noop ("write configuration file (for autoconfiguration)"),
- GNUNET_NO, &GNUNET_GETOPT_set_one, &write_cfg },
- {'W', "watch", NULL,
- gettext_noop ("watch for connection reversal requests"),
- GNUNET_NO, &GNUNET_GETOPT_set_one, &listen_reversal },
- GNUNET_GETOPT_OPTION_END
+ struct GNUNET_GETOPT_CommandLineOption options[] = {
+
+ GNUNET_GETOPT_option_string ('i',
+ "in",
+ "ADDRESS",
+ gettext_noop ("which IP and port are we locally using to bind/listen to"),
+ &local_addr),
+
+ GNUNET_GETOPT_option_string ('r',
+ "remote",
+ "ADDRESS",
+ gettext_noop ("which remote IP and port should be asked for connection reversal"),
+ &remote_addr),
+
+ GNUNET_GETOPT_option_string ('S',
+ "section",
+ NULL,
+ gettext_noop ("name of configuration section to find additional options, such as manual host punching data"),
+ §ion_name),
+
+ GNUNET_GETOPT_option_flag ('s',
+ "stun",
+ gettext_noop ("enable STUN processing"),
+ &do_stun),
+
+ GNUNET_GETOPT_option_flag ('t',
+ "tcp",
+ gettext_noop ("use TCP"),
+ &use_tcp),
+
+ GNUNET_GETOPT_option_flag ('u',
+ "udp",
+ gettext_noop ("use UDP"),
+ &use_udp),
+
+ GNUNET_GETOPT_option_flag ('W',
+ "watch",
+ gettext_noop ("watch for connection reversal requests"),
+ &listen_reversal),
+ GNUNET_GETOPT_OPTION_END
};
if (GNUNET_OK !=