/**
* Create a system handle. There must only be one system
- * handle per operating system.
+ * handle per operating system. Uses a default range for allowed ports.
+ * Ports are still tested for availability.
*
- * @param tmppath prefix path to use for all service homes
+ * @param testdir only the directory name without any path. This is used for
+ * all service homes; the directory will be created in a temporary
+ * location depending on the underlying OS
* @param controller hostname of the controlling host,
* service configurations are modified to allow
* control connections from this host; can be NULL
* @return handle to this system, NULL on error
*/
struct GNUNET_TESTING_System *
-GNUNET_TESTING_system_create (const char *tmppath,
+GNUNET_TESTING_system_create (const char *testdir,
const char *controller);
+/**
+ * Create a system handle. There must only be one system
+ * handle per operating system. Use this function directly
+ * if multiple system objects are created for the same host
+ * (only really useful when testing --- or to make the port
+ * range configureable).
+ *
+ * @param testdir only the directory name without any path. This is used for
+ * all service homes; the directory will be created in a temporary
+ * location depending on the underlying OS
+ * @param controller hostname of the controlling host,
+ * service configurations are modified to allow
+ * control connections from this host; can be NULL
+ * @param lowport lowest port number this system is allowed to allocate (inclusive)
+ * @param highport highest port number this system is allowed to allocate (exclusive)
+ * @return handle to this system, NULL on error
+ */
+struct GNUNET_TESTING_System *
+GNUNET_TESTING_system_create_with_portrange (const char *testdir,
+ const char *controller,
+ uint16_t lowport,
+ uint16_t highport);
+
+
/**
* Free system resources.
*
* @param system system to be freed
- * @param remove_paths should the 'tmppath' and all subdirectories
+ * @param remove_paths should the 'testdir' and all subdirectories
* be removed (clean up on shutdown)?
*/
void
* This is primarily a helper function used internally
* by 'GNUNET_TESTING_peer_configure'.
*
+ * @param system the testing system handle
* @param key_number desired pre-created hostkey to obtain
- * @param filename where to store the hostkey (file will
- * be created, or overwritten if it already exists)
* @param id set to the peer's identity (hash of the public
* key; if NULL, GNUNET_SYSERR is returned immediately
- * @return GNUNET_SYSERR on error (not enough keys)
+ * @return NULL on error (not enough keys)
*/
-int
-GNUNET_TESTING_hostkey_get (uint32_t key_number,
- const char *filename,
+struct GNUNET_CRYPTO_RsaPrivateKey *
+GNUNET_TESTING_hostkey_get (const struct GNUNET_TESTING_System *system,
+ uint32_t key_number,
struct GNUNET_PeerIdentity *id);
+/**
+ * Reserve a TCP or UDP port for a peer.
+ *
+ * @param system system to use for reservation tracking
+ * @param is_tcp GNUNET_YES for TCP ports, GNUNET_NO for UDP
+ * @return 0 if no free port was available
+ */
+uint16_t
+GNUNET_TESTING_reserve_port (struct GNUNET_TESTING_System *system,
+ int is_tcp);
+
+
+/**
+ * Release reservation of a TCP or UDP port for a peer
+ * (used during GNUNET_TESTING_peer_destroy).
+ *
+ * @param system system to use for reservation tracking
+ * @param is_tcp GNUNET_YES for TCP ports, GNUNET_NO for UDP
+ * @param port reserved port to release
+ */
+void
+GNUNET_TESTING_release_port (struct GNUNET_TESTING_System *system,
+ int is_tcp,
+ uint16_t port);
+
/**
- * Create a new configuration using the given configuration
- * as a template; ports and paths will be modified to select
- * available ports on the local system. If we run
+ * Create a new configuration using the given configuration as a template;
+ * ports and paths will be modified to select available ports on the local
+ * system. The default configuration will be available in PATHS section under
+ * the option DEFAULTCONFIG after the call. SERVICE_HOME is also set in PATHS
+ * section to the temporary directory specific to this configuration. If we run
* out of "*port" numbers, return SYSERR.
*
* This is primarily a helper function used internally
*
* @param system system to use to coordinate resource usage
* @param cfg template configuration to update
- * @return GNUNET_OK on success, GNUNET_SYSERR on error
+ * @return GNUNET_OK on success, GNUNET_SYSERR on error - the configuration will
+ * be incomplete and should not be used there upon
*/
int
GNUNET_TESTING_configuration_create (struct GNUNET_TESTING_System *system,
* changes in port numbers and paths)
* @param key_number number of the hostkey to use for the peer
* @param id identifier for the daemon, will be set, can be NULL
- * @param emsg set to error message (set to NULL on success), can be NULL
+ * @param emsg set to freshly allocated error message (set to NULL on success),
+ * can be NULL
* @return handle to the peer, NULL on error
*/
struct GNUNET_TESTING_Peer *
char **emsg);
+/**
+ * Obtain the peer identity from a peer handle.
+ *
+ * @param peer peer handle for which we want the peer's identity
+ * @param id identifier for the daemon, will be set
+ */
+void
+GNUNET_TESTING_peer_get_identity (const struct GNUNET_TESTING_Peer *peer,
+ struct GNUNET_PeerIdentity *id);
+
+
/**
* Start the peer.
*
*
* @param cls closure
* @param cfg configuration of the peer that was started
+ * @param peer identity of the peer that was created
*/
typedef void (*GNUNET_TESTING_TestMain)(void *cls,
- const struct GNUNET_CONFIGURATION_Handle *cfg);
+ const struct GNUNET_CONFIGURATION_Handle *cfg,
+ struct GNUNET_TESTING_Peer *peer);
/**
* and should thus be called directly from "main". The testcase
* should self-terminate by invoking 'GNUNET_SCHEDULER_shutdown'.
*
- * @param tmppath path for storing temporary data for the test
+ * @param testdir only the directory name without any path. This is used for
+ * all service homes; the directory will be created in a temporary
+ * location depending on the underlying OS
* @param cfgfilename name of the configuration file to use;
* use NULL to only run with defaults
* @param tm main function of the testcase
* @return 0 on success, 1 on error
*/
int
-GNUNET_TESTING_peer_run (const char *tmppath,
+GNUNET_TESTING_peer_run (const char *testdir,
const char *cfgfilename,
GNUNET_TESTING_TestMain tm,
void *tm_cls);
-
/**
* Start a single service (no ARM, except of course if the given
* service name is 'arm') and run a test using the testing library.
* This function is useful if the testcase is for a single service
* and if that service doesn't itself depend on other services.
*
- * @param tmppath path for storing temporary data for the test
+ * @param testdir only the directory name without any path. This is used for
+ * all service homes; the directory will be created in a temporary
+ * location depending on the underlying OS
* @param service_name name of the service to run
* @param cfgfilename name of the configuration file to use;
* use NULL to only run with defaults
* @return 0 on success, 1 on error
*/
int
-GNUNET_TESTING_service_run (const char *tmppath,
+GNUNET_TESTING_service_run (const char *testdir,
const char *service_name,
const char *cfgfilename,
GNUNET_TESTING_TestMain tm,
void *tm_cls);
+/**
+ * Sometimes we use the binary name to determine which specific
+ * test to run. In those cases, the string after the last "_"
+ * in 'argv[0]' specifies a string that determines the configuration
+ * file or plugin to use.
+ *
+ * This function returns the respective substring, taking care
+ * of issues such as binaries ending in '.exe' on W32.
+ *
+ * @param argv0 the name of the binary
+ * @return string between the last '_' and the '.exe' (or the end of the string),
+ * NULL if argv0 has no '_'
+ */
+char *
+GNUNET_TESTING_get_testname_from_underscore (const char *argv0);
+
#if 0 /* keep Emacsens' auto-indent happy */
{
projects / oweals / gnunet.git / blobdiff