*/
GNUNET_SCHEDULER_PRIORITY_URGENT = 6,
+ /**
+ * This is an internal priority level that is only used for tasks
+ * that are being triggered due to shutdown (they have automatically
+ * highest priority). User code must not use this priority level
+ * directly. Tasks run with this priority level that internally
+ * schedule other tasks will see their original priority level
+ * be inherited (unless otherwise specified).
+ */
+ GNUNET_SCHEDULER_PRIORITY_SHUTDOWN = 7,
+
/**
* Number of priorities (must be the last priority).
* This priority must not be used by clients.
*/
- GNUNET_SCHEDULER_PRIORITY_COUNT = 7
+ GNUNET_SCHEDULER_PRIORITY_COUNT = 8
};
#include "gnunet_time_lib.h"
/**
- * Initialize and run scheduler. This function will return when
- * either a shutdown was initiated (via signal) and all tasks marked
- * to "run_on_shutdown" have been completed or when all tasks in
- * general have been completed.
+ * Initialize and run scheduler. This function will return when all
+ * tasks have completed. On systems with signals, receiving a SIGTERM
+ * (and other similar signals) will cause "GNUNET_SCHEDULER_shutdown"
+ * to be run after the active task is complete. As a result, SIGTERM
+ * causes all active tasks to be scheduled with reason
+ * "GNUNET_SCHEDULER_REASON_SHUTDOWN". (However, tasks added
+ * afterwards will execute normally!). Note that any particular
+ * signal will only shut down one scheduler; applications should
+ * always only create a single scheduler.
*
- * @param task task to run immediately
- * @param cls closure of task
+ * @param task task to run first (and immediately)
+ * @param task_cls closure of task
*/
-void GNUNET_SCHEDULER_run (GNUNET_SCHEDULER_Task task, void *cls);
+void GNUNET_SCHEDULER_run (GNUNET_SCHEDULER_Task task, void *task_cls);
/**
- * Request the shutdown of a scheduler. This function can be used to
- * stop a scheduler, for example from within the signal
- * handler for signals causing shutdowns.
+ * Request the shutdown of a scheduler. Marks all currently
+ * pending tasks as ready because of shutdown. This will
+ * cause all tasks to run (as soon as possible, respecting
+ * priorities and prerequisite tasks). Note that tasks
+ * scheduled AFTER this call may still be delayed arbitrarily.
+ *
+ * @param sched the scheduler
*/
void GNUNET_SCHEDULER_shutdown (struct GNUNET_SCHEDULER_Handle *sched);
enum GNUNET_SCHEDULER_Priority p);
+/**
+ * Obtain the reason code for why the current task was
+ * started. Will return the same value as
+ * the GNUNET_SCHEDULER_TaskContext's reason field.
+ *
+ * @param sched scheduler to query
+ * @return reason(s) why the current task is run
+ */
+enum GNUNET_SCHEDULER_Reason
+GNUNET_SCHEDULER_get_reason (struct GNUNET_SCHEDULER_Handle *sched);
+
+
/**
* Cancel the task with the specified identifier.
* The task must not yet have run.
* and the reason code can be specified.
*
* @param sched scheduler to use
- * @param main main function of the task
- * @param cls closure of task
+ * @param task main function of the task
+ * @param task_cls closure of task
* @param reason reason for task invocation
*/
void
GNUNET_SCHEDULER_add_continuation (struct GNUNET_SCHEDULER_Handle *sched,
- int run_on_shutdown,
- GNUNET_SCHEDULER_Task main,
- void *cls,
+ GNUNET_SCHEDULER_Task task,
+ void *task_cls,
enum GNUNET_SCHEDULER_Reason reason);
/**
- * Schedule a new task to be run after the specified
- * prerequisite task has completed.
+ * Schedule a new task to be run after the specified prerequisite task
+ * has completed. It will be run with the priority of the calling
+ * task.
*
* @param sched scheduler to use
- * @param run_on_shutdown run on shutdown?
- * @param prio how important is this task?
* @param prerequisite_task run this task after the task with the given
* task identifier completes (and any of our other
- * conditions, such as delay, read or write-readyness
+ * conditions, such as delay, read or write-readiness
* are satisfied). Use GNUNET_SCHEDULER_NO_TASK to not have any dependency
- * on completion of other tasks.
- * @param main main function of the task
- * @param cls closure of task
+ * on completion of other tasks (this will cause the task to run as
+ * soon as possible).
+ * @param task main function of the task
+ * @param task_cls closure of task
* @return unique task identifier for the job
- * only valid until "main" is started!
+ * only valid until "task" is started!
*/
GNUNET_SCHEDULER_TaskIdentifier
GNUNET_SCHEDULER_add_after (struct GNUNET_SCHEDULER_Handle *sched,
- int run_on_shutdown,
- enum GNUNET_SCHEDULER_Priority prio,
GNUNET_SCHEDULER_TaskIdentifier prerequisite_task,
- GNUNET_SCHEDULER_Task main, void *cls);
+ GNUNET_SCHEDULER_Task task,
+ void *task_cls);
+
+
+/**
+ * Schedule a new task to be run with a specified priority.
+ *
+ * @param sched scheduler to use
+ * @param prio how important is the new task?
+ * @param task main function of the task
+ * @param task_cls closure of task
+ * @return unique task identifier for the job
+ * only valid until "task" is started!
+ */
+GNUNET_SCHEDULER_TaskIdentifier
+GNUNET_SCHEDULER_add_with_priority (struct GNUNET_SCHEDULER_Handle *sched,
+ enum GNUNET_SCHEDULER_Priority prio,
+ GNUNET_SCHEDULER_Task task,
+ void *task_cls);
+
+
+/**
+ * Schedule a new task to be run as soon as possible. The task
+ * will be run with the priority of the calling task.
+ *
+ * @param sched scheduler to use
+ * @param task main function of the task
+ * @param task_cls closure of task
+ * @return unique task identifier for the job
+ * only valid until "task" is started!
+ */
+GNUNET_SCHEDULER_TaskIdentifier
+GNUNET_SCHEDULER_add_now (struct GNUNET_SCHEDULER_Handle *sched,
+ GNUNET_SCHEDULER_Task task,
+ void *task_cls);
/**
* Schedule a new task to be run with a specified delay. The task
- * will be scheduled for execution once the delay has expired and the
- * prerequisite task has completed.
+ * will be scheduled for execution once the delay has expired. It
+ * will be run with the priority of the calling task.
*
* @param sched scheduler to use
- * @param run_on_shutdown run on shutdown? You can use this
- * argument to run a function only during shutdown
- * by setting delay to -1. Set this
- * argument to GNUNET_NO to skip this task if
- * the user requested process termination.
- * @param prio how important is this task?
- * @param prerequisite_task run this task after the task with the given
- * task identifier completes (and any of our other
- * conditions, such as delay, read or write-readyness
- * are satisfied). Use GNUNET_SCHEDULER_NO_TASK to not have any dependency
- * on completion of other tasks.
- * @param delay how long should we wait? Use GNUNET_TIME_UNIT_FOREVER_REL for "forever"
- * @param main main function of the task
- * @param cls closure of task
+ * @param delay when should this operation time out? Use
+ * GNUNET_TIME_UNIT_FOREVER_REL for "on shutdown"
+ * @param task main function of the task
+ * @param task_cls closure of task
* @return unique task identifier for the job
- * only valid until "main" is started!
+ * only valid until "task" is started!
*/
GNUNET_SCHEDULER_TaskIdentifier
GNUNET_SCHEDULER_add_delayed (struct GNUNET_SCHEDULER_Handle *sched,
- int run_on_shutdown,
- enum GNUNET_SCHEDULER_Priority prio,
- GNUNET_SCHEDULER_TaskIdentifier
- prerequisite_task,
struct GNUNET_TIME_Relative delay,
- GNUNET_SCHEDULER_Task main, void *cls);
+ GNUNET_SCHEDULER_Task task,
+ void *task_cls);
/**
* specified file descriptor is ready for reading. The delay can be
* used as a timeout on the socket being ready. The task will be
* scheduled for execution once either the delay has expired or the
- * socket operation is ready.
+ * socket operation is ready. It will be run with the priority of
+ * the calling task.
*
* @param sched scheduler to use
- * @param run_on_shutdown run on shutdown? Set this
- * argument to GNUNET_NO to skip this task if
- * the user requested process termination.
- * @param prio how important is this task?
- * @param prerequisite_task run this task after the task with the given
- * task identifier completes (and any of our other
- * conditions, such as delay, read or write-readyness
- * are satisfied). Use GNUNET_SCHEDULER_NO_TASK to not have any dependency
- * on completion of other tasks.
- * @param delay how long should we wait? Use GNUNET_TIME_UNIT_FOREVER_REL for "forever"
+ * @param delay when should this operation time out? Use
+ * GNUNET_TIME_UNIT_FOREVER_REL for "on shutdown"
* @param rfd read file-descriptor
- * @param main main function of the task
- * @param cls closure of task
+ * @param task main function of the task
+ * @param task_cls closure of task
* @return unique task identifier for the job
- * only valid until "main" is started!
+ * only valid until "task" is started!
*/
GNUNET_SCHEDULER_TaskIdentifier
GNUNET_SCHEDULER_add_read_net (struct GNUNET_SCHEDULER_Handle *sched,
- int run_on_shutdown,
- enum GNUNET_SCHEDULER_Priority prio,
- GNUNET_SCHEDULER_TaskIdentifier prerequisite_task,
- struct GNUNET_TIME_Relative delay,
- struct GNUNET_NETWORK_Handle *rfd, GNUNET_SCHEDULER_Task main, void *cls);
+ struct GNUNET_TIME_Relative delay,
+ struct GNUNET_NETWORK_Handle *rfd,
+ GNUNET_SCHEDULER_Task task,
+ void *task_cls);
/**
* specified file descriptor is ready for writing. The delay can be
* used as a timeout on the socket being ready. The task will be
* scheduled for execution once either the delay has expired or the
- * socket operation is ready.
+ * socket operation is ready. It will be run with the priority of
+ * the calling task.
*
* @param sched scheduler to use
- * @param run_on_shutdown run on shutdown? Set this
- * argument to GNUNET_NO to skip this task if
- * the user requested process termination.
- * @param prio how important is this task?
- * @param prerequisite_task run this task after the task with the given
- * task identifier completes (and any of our other
- * conditions, such as delay, read or write-readyness
- * are satisfied). Use GNUNET_SCHEDULER_NO_TASK to not have any dependency
- * on completion of other tasks.
- * @param delay how long should we wait? Use GNUNET_TIME_UNIT_FOREVER_REL for "forever"
+ * @param delay when should this operation time out? Use
+ * GNUNET_TIME_UNIT_FOREVER_REL for "on shutdown"
* @param wfd write file-descriptor
- * @param main main function of the task
- * @param cls closure of task
+ * @param task main function of the task
+ * @param task_cls closure of task
* @return unique task identifier for the job
- * only valid until "main" is started!
+ * only valid until "task" is started!
*/
GNUNET_SCHEDULER_TaskIdentifier
GNUNET_SCHEDULER_add_write_net (struct GNUNET_SCHEDULER_Handle *sched,
- int run_on_shutdown,
- enum GNUNET_SCHEDULER_Priority prio,
- GNUNET_SCHEDULER_TaskIdentifier prerequisite_task,
- struct GNUNET_TIME_Relative delay,
- struct GNUNET_NETWORK_Handle *wfd, GNUNET_SCHEDULER_Task main, void *cls);
+ struct GNUNET_TIME_Relative delay,
+ struct GNUNET_NETWORK_Handle *wfd,
+ GNUNET_SCHEDULER_Task task,
+ void *task_cls);
/**
* specified file descriptor is ready for reading. The delay can be
* used as a timeout on the socket being ready. The task will be
* scheduled for execution once either the delay has expired or the
- * socket operation is ready.
+ * socket operation is ready. It will be run with the priority of
+ * the calling task.
*
* @param sched scheduler to use
- * @param run_on_shutdown run on shutdown? Set this
- * argument to GNUNET_NO to skip this task if
- * the user requested process termination.
- * @param prio how important is this task?
- * @param prerequisite_task run this task after the task with the given
- * task identifier completes (and any of our other
- * conditions, such as delay, read or write-readyness
- * are satisfied). Use GNUNET_SCHEDULER_NO_TASK to not have any dependency
- * on completion of other tasks.
- * @param delay how long should we wait? Use GNUNET_TIME_UNIT_FOREVER_REL for "forever"
+ * @param delay when should this operation time out? Use
+ * GNUNET_TIME_UNIT_FOREVER_REL for "on shutdown"
* @param rfd read file-descriptor
- * @param main main function of the task
- * @param cls closure of task
+ * @param task main function of the task
+ * @param task_cls closure of task
* @return unique task identifier for the job
- * only valid until "main" is started!
+ * only valid until "task" is started!
*/
GNUNET_SCHEDULER_TaskIdentifier
GNUNET_SCHEDULER_add_read_file (struct GNUNET_SCHEDULER_Handle *sched,
- int run_on_shutdown,
- enum GNUNET_SCHEDULER_Priority prio,
- GNUNET_SCHEDULER_TaskIdentifier prerequisite_task,
- struct GNUNET_TIME_Relative delay,
- struct GNUNET_DISK_FileHandle *rfd, GNUNET_SCHEDULER_Task main, void *cls);
+ struct GNUNET_TIME_Relative delay,
+ const struct GNUNET_DISK_FileHandle *rfd,
+ GNUNET_SCHEDULER_Task task,
+ void *task_cls);
/**
* specified file descriptor is ready for writing. The delay can be
* used as a timeout on the socket being ready. The task will be
* scheduled for execution once either the delay has expired or the
- * socket operation is ready.
+ * socket operation is ready. It will be run with the priority of
+ * the calling task.
*
* @param sched scheduler to use
- * @param run_on_shutdown run on shutdown? Set this
- * argument to GNUNET_NO to skip this task if
- * the user requested process termination.
- * @param prio how important is this task?
- * @param prerequisite_task run this task after the task with the given
- * task identifier completes (and any of our other
- * conditions, such as delay, read or write-readyness
- * are satisfied). Use GNUNET_SCHEDULER_NO_TASK to not have any dependency
- * on completion of other tasks.
- * @param delay how long should we wait? Use GNUNET_TIME_UNIT_FOREVER_REL for "forever"
+ * @param delay when should this operation time out? Use
+ * GNUNET_TIME_UNIT_FOREVER_REL for "on shutdown"
* @param wfd write file-descriptor
- * @param main main function of the task
- * @param cls closure of task
+ * @param task main function of the task
+ * @param task_cls closure of task
* @return unique task identifier for the job
- * only valid until "main" is started!
+ * only valid until "task" is started!
*/
GNUNET_SCHEDULER_TaskIdentifier
GNUNET_SCHEDULER_add_write_file (struct GNUNET_SCHEDULER_Handle *sched,
- int run_on_shutdown,
- enum GNUNET_SCHEDULER_Priority prio,
- GNUNET_SCHEDULER_TaskIdentifier prerequisite_task,
- struct GNUNET_TIME_Relative delay,
- struct GNUNET_DISK_FileHandle *wfd, GNUNET_SCHEDULER_Task main, void *cls);
+ struct GNUNET_TIME_Relative delay,
+ const struct GNUNET_DISK_FileHandle *wfd,
+ GNUNET_SCHEDULER_Task task,
+ void *task_cls);
/**
* && (delay-ready
* || any-rs-ready
* || any-ws-ready
- * || (shutdown-active && run-on-shutdown) )
+ * || shutdown-active)
* </code>
*
* @param sched scheduler to use
- * @param run_on_shutdown run on shutdown? Set this
- * argument to GNUNET_NO to skip this task if
- * the user requested process termination.
* @param prio how important is this task?
* @param prerequisite_task run this task after the task with the given
* task identifier completes (and any of our other
- * conditions, such as delay, read or write-readyness
+ * conditions, such as delay, read or write-readiness
* are satisfied). Use GNUNET_SCHEDULER_NO_TASK to not have any dependency
* on completion of other tasks.
- * @param delay how long should we wait? Use GNUNET_TIME_UNIT_FOREVER_REL for "forever"
- * @param nfds highest-numbered file descriptor in any of the two sets plus one
+ * @param delay how long should we wait? Use GNUNET_TIME_UNIT_FOREVER_REL for "forever",
+ * which means that the task will only be run after we receive SIGTERM
* @param rs set of file descriptors we want to read (can be NULL)
* @param ws set of file descriptors we want to write (can be NULL)
- * @param main main function of the task
- * @param cls closure of task
+ * @param task main function of the task
+ * @param task_cls closure of task
* @return unique task identifier for the job
- * only valid until "main" is started!
+ * only valid until "task" is started!
*/
GNUNET_SCHEDULER_TaskIdentifier
GNUNET_SCHEDULER_add_select (struct GNUNET_SCHEDULER_Handle *sched,
- int run_on_shutdown,
enum GNUNET_SCHEDULER_Priority prio,
GNUNET_SCHEDULER_TaskIdentifier
prerequisite_task,
struct GNUNET_TIME_Relative delay,
- const struct GNUNET_NETWORK_FDSet * rs, const struct GNUNET_NETWORK_FDSet * ws,
- GNUNET_SCHEDULER_Task main, void *cls);
+ const struct GNUNET_NETWORK_FDSet * rs,
+ const struct GNUNET_NETWORK_FDSet * ws,
+ GNUNET_SCHEDULER_Task task,
+ void *task_cls);
#if 0 /* keep Emacsens' auto-indent happy */
{
projects / oweals / gnunet.git / blobdiff