/*
This file is part of GNUnet.
- (C) 2007, 2008, 2009, 2010, 2011 Christian Grothoff (and other contributing authors)
+ (C) 2007-2014 Christian Grothoff (and other contributing authors)
GNUnet is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published
* @file include/gnunet_nat_lib.h
* @brief Library handling UPnP and NAT-PMP port forwarding and
* external IP address retrieval
- *
+ * @author Christian Grothoff
* @author Milan Bouchet-Valat
*/
#include "gnunet_util_lib.h"
+
/**
- * Signature of the callback passed to GNUNET_NAT_register for
+ * Signature of the callback passed to #GNUNET_NAT_register() for
* a function to call whenever our set of 'valid' addresses changes.
*
* @param cls closure
- * @param add_remove GNUNET_YES to mean the new public IP address, GNUNET_NO to mean
+ * @param add_remove #GNUNET_YES to mean the new public IP address, #GNUNET_NO to mean
* the previous (now invalid) one
* @param addr either the previous or the new public IP address
- * @param addrlen actual lenght of the address
+ * @param addrlen actual length of the @a addr
*/
-typedef void (*GNUNET_NAT_AddressCallback) (void *cls, int add_remove,
- const struct sockaddr * addr,
- socklen_t addrlen);
+typedef void
+(*GNUNET_NAT_AddressCallback) (void *cls,
+ int add_remove,
+ const struct sockaddr *addr,
+ socklen_t addrlen);
/**
- * Signature of the callback passed to GNUNET_NAT_register
+ * Signature of the callback passed to #GNUNET_NAT_register().
* for a function to call whenever someone asks us to do connection
* reversal.
*
* @param cls closure
* @param addr public IP address of the other peer
- * @param addrlen actual lenght of the address
+ * @param addrlen actual lenght of the @a addr
*/
-typedef void (*GNUNET_NAT_ReversalCallback) (void *cls,
- const struct sockaddr * addr,
- socklen_t addrlen);
+typedef void
+(*GNUNET_NAT_ReversalCallback) (void *cls,
+ const struct sockaddr *addr,
+ socklen_t addrlen);
/**
/**
- * Attempt to enable port redirection and detect public IP address contacting
- * UPnP or NAT-PMP routers on the local network. Use addr to specify to which
- * of the local host's addresses should the external port be mapped. The port
- * is taken from the corresponding sockaddr_in[6] field. The NAT module
- * should call the given callback for any 'plausible' external address.
+ * Error Types for the NAT subsystem (which can then later be converted/resolved to a string)
+ */
+enum GNUNET_NAT_FailureCode
+{
+ /**
+ * Just the default
+ */
+ GNUNET_NAT_ERROR_SUCCESS = GNUNET_OK,
+
+ /**
+ * `external-ip' command not found
+ */
+ GNUNET_NAT_ERROR_IPC_FAILURE,
+
+ /**
+ * `external-ip' command not found
+ */
+ GNUNET_NAT_ERROR_TIMEOUT,
+
+ /**
+ * `external-ip' command not found
+ */
+ GNUNET_NAT_ERROR_NOT_ONLINE,
+
+ /**
+ * `upnpc` command not found
+ */
+ GNUNET_NAT_ERROR_UPNPC_NOT_FOUND,
+
+ /**
+ * Failed to run `upnpc` command
+ */
+ GNUNET_NAT_ERROR_UPNPC_FAILED,
+
+ /**
+ * `upnpc' command took too long, process killed
+ */
+ GNUNET_NAT_ERROR_UPNPC_TIMEOUT,
+
+ /**
+ * `upnpc' command failed to establish port mapping
+ */
+ GNUNET_NAT_ERROR_UPNPC_PORTMAP_FAILED,
+
+ /**
+ * `external-ip' command not found
+ */
+ GNUNET_NAT_ERROR_EXTERNAL_IP_UTILITY_NOT_FOUND,
+
+ /**
+ * `external-ip' command not found
+ */
+ GNUNET_NAT_ERROR_EXTERNAL_IP_UTILITY_NOT_EXECUTEABLE,
+
+ /**
+ * `external-ip' command not found
+ */
+ GNUNET_NAT_ERROR_EXTERNAL_IP_UTILITY_OUTPUT_INVALID,
+
+ /**
+ * "no valid address was returned by `external-ip'"
+ */
+ GNUNET_NAT_ERROR_EXTERNAL_IP_ADDRESS_INVALID,
+
+ /**
+ * Could not determine interface with internal/local network address
+ */
+ GNUNET_NAT_ERROR_NO_VALID_IF_IP_COMBO,
+
+ /**
+ * No working gnunet-helper-nat-server found
+ */
+ GNUNET_NAT_ERROR_HELPER_NAT_SERVER_NOT_FOUND,
+
+ /**
+ * NAT test could not be initialized
+ */
+ GNUNET_NAT_ERROR_NAT_TEST_START_FAILED,
+
+ /**
+ * NAT test timeout
+ */
+ GNUNET_NAT_ERROR_NAT_TEST_TIMEOUT,
+
+ /**
+ *
+ */
+ GNUNET_NAT_ERROR_HELPER_NAT_CLIENT_NOT_FOUND,
+
+
+ /**
+ *
+ */
+ GNUNET_NAT_ERROR_
+};
+
+
+/**
+ * Attempt to enable port redirection and detect public IP address
+ * contacting UPnP or NAT-PMP routers on the local network. Use addr
+ * to specify to which of the local host's addresses should the
+ * external port be mapped. The port is taken from the corresponding
+ * sockaddr_in[6] field. The NAT module should call the given
+ * callback for any 'plausible' external address.
*
* @param cfg configuration to use
- * @param is_tcp GNUNET_YES for TCP, GNUNET_NO for UDP
+ * @param is_tcp #GNUNET_YES for TCP, #GNUNET_NO for UDP
* @param adv_port advertised port (port we are either bound to or that our OS
* locally performs redirection from to our bound port).
- * @param num_addrs number of addresses in 'addrs'
+ * @param num_addrs number of addresses in @a addrs
* @param addrs list of local addresses packets should be redirected to
- * @param addrlens actual lengths of the addresses
+ * @param addrlens actual lengths of the addresses in @a addrs
* @param address_callback function to call everytime the public IP address changes
* @param reversal_callback function to call if someone wants connection reversal from us,
* NULL if connection reversal is not supported
- * @param callback_cls closure for callback
+ * @param callback_cls closure for callbacks
* @return NULL on error, otherwise handle that can be used to unregister
*/
struct GNUNET_NAT_Handle *
-GNUNET_NAT_register (const struct GNUNET_CONFIGURATION_Handle *cfg, int is_tcp,
- uint16_t adv_port, unsigned int num_addrs,
- const struct sockaddr **addrs, const socklen_t * addrlens,
+GNUNET_NAT_register (const struct GNUNET_CONFIGURATION_Handle *cfg,
+ int is_tcp,
+ uint16_t adv_port,
+ unsigned int num_addrs,
+ const struct sockaddr **addrs,
+ const socklen_t *addrlens,
GNUNET_NAT_AddressCallback address_callback,
GNUNET_NAT_ReversalCallback reversal_callback,
void *callback_cls);
/**
- * Test if the given address is (currently) a plausible IP address for this peer.
+ * Test if the given address is (currently) a plausible IP address for
+ * this peer.
*
* @param h the handle returned by register
* @param addr IP address to test (IPv4 or IPv6)
- * @param addrlen number of bytes in addr
- * @return GNUNET_YES if the address is plausible,
- * GNUNET_NO if the address is not plausible,
- * GNUNET_SYSERR if the address is malformed
+ * @param addrlen number of bytes in @a addr
+ * @return #GNUNET_YES if the address is plausible,
+ * #GNUNET_NO if the address is not plausible,
+ * #GNUNET_SYSERR if the address is malformed
*/
int
-GNUNET_NAT_test_address (struct GNUNET_NAT_Handle *h, const void *addr,
+GNUNET_NAT_test_address (struct GNUNET_NAT_Handle *h,
+ const void *addr,
socklen_t addrlen);
*
* @param h handle (used for configuration)
* @param sa the address of the peer (IPv4-only)
+ * @return #GNUNET_SYSERR on error, #GNUNET_NO if nat client is disabled,
+ * #GNUNET_OK otherwise
*/
-void
+int
GNUNET_NAT_run_client (struct GNUNET_NAT_Handle *h,
const struct sockaddr_in *sa);
-
/**
- * Stop port redirection and public IP address detection for the given handle.
- * This frees the handle, after having sent the needed commands to close open ports.
+ * Stop port redirection and public IP address detection for the given
+ * handle. This frees the handle, after having sent the needed
+ * commands to close open ports.
*
* @param h the handle to stop
*/
*/
struct GNUNET_NAT_Test;
+
/**
* Function called to report success or failure for
* NAT configuration test.
*
* @param cls closure
- * @param success GNUNET_OK on success, GNUNET_NO on failure,
- * GNUNET_SYSERR if the test could not be
- * properly started (internal failure)
+ * @param result #GNUNET_NAT_ERROR_SUCCESS on success, otherwise the specific error code
*/
-typedef void (*GNUNET_NAT_TestCallback) (void *cls, int success);
+typedef void (*GNUNET_NAT_TestCallback) (void *cls,
+ enum GNUNET_NAT_FailureCode result);
+
/**
* Start testing if NAT traversal works using the
* given configuration (IPv4-only).
*
* @param cfg configuration for the NAT traversal
- * @param is_tcp GNUNET_YES to test TCP, GNUNET_NO to test UDP
+ * @param is_tcp #GNUNET_YES to test TCP, #GNUNET_NO to test UDP
* @param bnd_port port to bind to, 0 for connection reversal
* @param adv_port externally advertised port to use
+ * @param timeout delay after which the test should be aborted
* @param report function to call with the result of the test
- * @param report_cls closure for report
+ * @param report_cls closure for @a report
* @return handle to cancel NAT test
*/
struct GNUNET_NAT_Test *
GNUNET_NAT_test_start (const struct GNUNET_CONFIGURATION_Handle *cfg,
- int is_tcp, uint16_t bnd_port, uint16_t adv_port,
- GNUNET_NAT_TestCallback report, void *report_cls);
+ int is_tcp,
+ uint16_t bnd_port,
+ uint16_t adv_port,
+ struct GNUNET_TIME_Relative timeout,
+ GNUNET_NAT_TestCallback report,
+ void *report_cls);
/**
*
* @param cls closure
* @param addr the address, NULL on errors
+ * @param result GNUNET_NAT_ERROR_SUCCESS on success, otherwise the specific error code
*/
-typedef void (*GNUNET_NAT_IPCallback) (void *cls, const struct in_addr * addr);
+typedef void (*GNUNET_NAT_IPCallback) (void *cls,
+ const struct in_addr *addr,
+ enum GNUNET_NAT_FailureCode result);
/**
- * Opaque handle to cancel "GNUNET_NAT_mini_get_external_ipv4" operation.
+ * Opaque handle to cancel #GNUNET_NAT_mini_get_external_ipv4() operation.
*/
struct GNUNET_NAT_ExternalHandle;
*
* @param timeout when to fail
* @param cb function to call with result
- * @param cb_cls closure for 'cb'
- * @return handle for cancellation (can only be used until 'cb' is called), NULL on error
+ * @param cb_cls closure for @a cb
+ * @return handle for cancellation (can only be used until @a cb is called), NULL on error
*/
struct GNUNET_NAT_ExternalHandle *
GNUNET_NAT_mini_get_external_ipv4 (struct GNUNET_TIME_Relative timeout,
- GNUNET_NAT_IPCallback cb, void *cb_cls);
+ GNUNET_NAT_IPCallback cb,
+ void *cb_cls);
/**
struct GNUNET_NAT_MiniHandle;
+/**
+ * Signature of the callback passed to #GNUNET_NAT_register() for
+ * a function to call whenever our set of 'valid' addresses changes.
+ *
+ * @param cls closure
+ * @param add_remove #GNUNET_YES to mean the new public IP address, #GNUNET_NO to mean
+ * the previous (now invalid) one, #GNUNET_SYSERR indicates an error
+ * @param addr either the previous or the new public IP address
+ * @param addrlen actual length of the @a addr
+ * @param result GNUNET_NAT_ERROR_SUCCESS on success, otherwise the specific error code
+ */
+typedef void
+(*GNUNET_NAT_MiniAddressCallback) (void *cls,
+ int add_remove,
+ const struct sockaddr *addr,
+ socklen_t addrlen,
+ enum GNUNET_NAT_FailureCode result);
+
+
/**
* Start mapping the given port using (mini)upnpc. This function
* should typically not be used directly (it is used within the
- * general-purpose 'GNUNET_NAT_register' code). However, it can be
+ * general-purpose #GNUNET_NAT_register() code). However, it can be
* used if specifically UPnP-based NAT traversal is to be used or
* tested.
*
* @param port port to map
- * @param is_tcp GNUNET_YES to map TCP, GNUNET_NO for UDP
+ * @param is_tcp #GNUNET_YES to map TCP, #GNUNET_NO for UDP
* @param ac function to call with mapping result
- * @param ac_cls closure for 'ac'
+ * @param ac_cls closure for @a ac
* @return NULL on error
*/
struct GNUNET_NAT_MiniHandle *
-GNUNET_NAT_mini_map_start (uint16_t port, int is_tcp,
- GNUNET_NAT_AddressCallback ac, void *ac_cls);
+GNUNET_NAT_mini_map_start (uint16_t port,
+ int is_tcp,
+ GNUNET_NAT_MiniAddressCallback ac,
+ void *ac_cls);
/**
* Remove a mapping created with (mini)upnpc. Calling
- * this function will give 'upnpc' 1s to remove tha mapping,
+ * this function will give 'upnpc' 1s to remove the mapping,
* so while this function is non-blocking, a task will be
* left with the scheduler for up to 1s past this call.
*
GNUNET_NAT_mini_map_stop (struct GNUNET_NAT_MiniHandle *mini);
+/**
+ * Handle to auto-configuration in progress.
+ */
+struct GNUNET_NAT_AutoHandle;
+
+
+/**
+ * Function called with the result from the autoconfiguration.
+ *
+ * @param cls closure
+ * @param diff minimal suggested changes to the original configuration
+ * to make it work (as best as we can)
+ * @param result GNUNET_NAT_ERROR_SUCCESS on success, otherwise the specific error code
+ */
+typedef void
+(*GNUNET_NAT_AutoResultCallback)(void *cls,
+ const struct GNUNET_CONFIGURATION_Handle *diff,
+ enum GNUNET_NAT_FailureCode result);
+
+
+/**
+ * Start auto-configuration routine. The resolver service should
+ * be available when this function is called.
+ *
+ * @param cfg initial configuration
+ * @param cb function to call with autoconfiguration result
+ * @param cb_cls closure for @a cb
+ * @return handle to cancel operation
+ */
+struct GNUNET_NAT_AutoHandle *
+GNUNET_NAT_autoconfig_start (const struct GNUNET_CONFIGURATION_Handle *cfg,
+ GNUNET_NAT_AutoResultCallback cb,
+ void *cb_cls);
+
+
+/**
+ * Abort autoconfiguration.
+ *
+ * @param ah handle for operation to abort
+ */
+void
+GNUNET_NAT_autoconfig_cancel (struct GNUNET_NAT_AutoHandle *ah);
+
#endif
/* end of gnunet_nat_lib.h */