- Remove printf, use GNUNET_log INFO
[oweals/gnunet.git] / src / include / gnunet_nat_lib.h
index 6d158930a2a3aea8b243e5cf32d5efb9ffc38389..93b441849b886abbcd513d2b305bbb86969795a7 100644 (file)
@@ -1,6 +1,6 @@
 /*
      This file is part of GNUnet.
-     (C) 2007, 2008, 2009, 2010 Christian Grothoff (and other contributing authors)
+     (C) 2007, 2008, 2009, 2010, 2011, 2012 Christian Grothoff (and other contributing authors)
 
      GNUnet is free software; you can redistribute it and/or modify
      it under the terms of the GNU General Public License as published
@@ -32,7 +32,8 @@
 #include "gnunet_util_lib.h"
 
 /**
- * Signature of the callback passed to GNUNET_NAT_register.
+ * Signature of the callback passed to GNUNET_NAT_register for
+ * a function to call whenever our set of 'valid' addresses changes.
  *
  * @param cls closure
  * @param add_remove GNUNET_YES to mean the new public IP address, GNUNET_NO to mean
  * @param addr either the previous or the new public IP address
  * @param addrlen actual lenght of the address
  */
-typedef void (*GNUNET_NAT_AddressCallback) (void *cls, 
-                                           int add_remove,
-                                            const struct sockaddr *addr,
+typedef void (*GNUNET_NAT_AddressCallback) (void *cls, int add_remove,
+                                            const struct sockaddr * addr,
                                             socklen_t addrlen);
 
 
+/**
+ * Signature of the callback passed to GNUNET_NAT_register
+ * for a function to call whenever someone asks us to do connection
+ * reversal.
+ *
+ * @param cls closure
+ * @param addr public IP address of the other peer
+ * @param addrlen actual lenght of the address
+ */
+typedef void (*GNUNET_NAT_ReversalCallback) (void *cls,
+                                             const struct sockaddr * addr,
+                                             socklen_t addrlen);
+
+
 /**
  * Handle for active NAT registrations.
  */
 struct GNUNET_NAT_Handle;
 
+
 /**
  * Attempt to enable port redirection and detect public IP address contacting
  * UPnP or NAT-PMP routers on the local network. Use addr to specify to which
  * of the local host's addresses should the external port be mapped. The port
- * is taken from the corresponding sockaddr_in[6] field.
+ * is taken from the corresponding sockaddr_in[6] field.  The NAT module
+ * should call the given callback for any 'plausible' external address.
  *
- * @param addr the local address packets should be redirected to
- * @param addrlen actual lenght of the address
- * @param callback function to call everytime the public IP address changes
+ * @param cfg configuration to use
+ * @param is_tcp GNUNET_YES for TCP, GNUNET_NO for UDP
+ * @param adv_port advertised port (port we are either bound to or that our OS
+ *                 locally performs redirection from to our bound port).
+ * @param num_addrs number of addresses in 'addrs'
+ * @param addrs list of local addresses packets should be redirected to
+ * @param addrlens actual lengths of the addresses
+ * @param address_callback function to call everytime the public IP address changes
+ * @param reversal_callback function to call if someone wants connection reversal from us,
+ *        NULL if connection reversal is not supported
  * @param callback_cls closure for callback
- * @return NULL on error, otherwise handle that can be used to unregister 
+ * @return NULL on error, otherwise handle that can be used to unregister
  */
 struct GNUNET_NAT_Handle *
-GNUNET_NAT_register (const struct sockaddr *addr,
-                    socklen_t addrlen,
-                    GNUNET_NAT_AddressCallback callback, 
-                    void *callback_cls);
+GNUNET_NAT_register (const struct GNUNET_CONFIGURATION_Handle *cfg, int is_tcp,
+                     uint16_t adv_port, unsigned int num_addrs,
+                     const struct sockaddr **addrs, const socklen_t * addrlens,
+                     GNUNET_NAT_AddressCallback address_callback,
+                     GNUNET_NAT_ReversalCallback reversal_callback,
+                     void *callback_cls);
+
+
+/**
+ * Test if the given address is (currently) a plausible IP address for this peer.
+ *
+ * @param h the handle returned by register
+ * @param addr IP address to test (IPv4 or IPv6)
+ * @param addrlen number of bytes in addr
+ * @return GNUNET_YES if the address is plausible,
+ *         GNUNET_NO if the address is not plausible,
+ *         GNUNET_SYSERR if the address is malformed
+ */
+int
+GNUNET_NAT_test_address (struct GNUNET_NAT_Handle *h, const void *addr,
+                         socklen_t addrlen);
+
+
+/**
+ * We learned about a peer (possibly behind NAT) so run the
+ * gnunet-nat-client to send dummy ICMP responses to cause
+ * that peer to connect to us (connection reversal).
+ *
+ * @param h handle (used for configuration)
+ * @param sa the address of the peer (IPv4-only)
+ *
+ * @return GNUNET_SYSERR on error, GNUNET_NO if nat client is disabled,
+ *         GNUNET_OK otherwise
+ */
+int
+GNUNET_NAT_run_client (struct GNUNET_NAT_Handle *h,
+                       const struct sockaddr_in *sa);
+
 
 
 /**
@@ -76,8 +133,167 @@ GNUNET_NAT_register (const struct sockaddr *addr,
  *
  * @param h the handle to stop
  */
-void GNUNET_NAT_unregister (struct GNUNET_NAT_Handle *h);
+void
+GNUNET_NAT_unregister (struct GNUNET_NAT_Handle *h);
+
+
+/**
+ * Handle to a NAT test.
+ */
+struct GNUNET_NAT_Test;
+
+/**
+ * Function called to report success or failure for
+ * NAT configuration test.
+ *
+ * @param cls closure
+ * @param success GNUNET_OK on success, GNUNET_NO on failure,
+ *                GNUNET_SYSERR if the test could not be
+ *                properly started (internal failure)
+ */
+typedef void (*GNUNET_NAT_TestCallback) (void *cls, int success);
+
+/**
+ * Start testing if NAT traversal works using the
+ * given configuration (IPv4-only).
+ *
+ * @param cfg configuration for the NAT traversal
+ * @param is_tcp GNUNET_YES to test TCP, GNUNET_NO to test UDP
+ * @param bnd_port port to bind to, 0 for connection reversal
+ * @param adv_port externally advertised port to use
+ * @param report function to call with the result of the test
+ * @param report_cls closure for report
+ * @return handle to cancel NAT test
+ */
+struct GNUNET_NAT_Test *
+GNUNET_NAT_test_start (const struct GNUNET_CONFIGURATION_Handle *cfg,
+                       int is_tcp, uint16_t bnd_port, uint16_t adv_port,
+                       GNUNET_NAT_TestCallback report, void *report_cls);
+
+
+/**
+ * Stop an active NAT test.
+ *
+ * @param tst test to stop.
+ */
+void
+GNUNET_NAT_test_stop (struct GNUNET_NAT_Test *tst);
+
+
+/**
+ * Signature of a callback that is given an IP address.
+ *
+ * @param cls closure
+ * @param addr the address, NULL on errors
+ */
+typedef void (*GNUNET_NAT_IPCallback) (void *cls, const struct in_addr * addr);
+
+
+
+/**
+ * Opaque handle to cancel "GNUNET_NAT_mini_get_external_ipv4" operation.
+ */
+struct GNUNET_NAT_ExternalHandle;
+
+
+/**
+ * Try to get the external IPv4 address of this peer.
+ *
+ * @param timeout when to fail
+ * @param cb function to call with result
+ * @param cb_cls closure for 'cb'
+ * @return handle for cancellation (can only be used until 'cb' is called), NULL on error
+ */
+struct GNUNET_NAT_ExternalHandle *
+GNUNET_NAT_mini_get_external_ipv4 (struct GNUNET_TIME_Relative timeout,
+                                   GNUNET_NAT_IPCallback cb, void *cb_cls);
+
+
+/**
+ * Cancel operation.
+ *
+ * @param eh operation to cancel
+ */
+void
+GNUNET_NAT_mini_get_external_ipv4_cancel (struct GNUNET_NAT_ExternalHandle *eh);
+
+
+/**
+ * Handle to a mapping created with upnpc.
+ */
+struct GNUNET_NAT_MiniHandle;
+
+
+/**
+ * Start mapping the given port using (mini)upnpc.  This function
+ * should typically not be used directly (it is used within the
+ * general-purpose 'GNUNET_NAT_register' code).  However, it can be
+ * used if specifically UPnP-based NAT traversal is to be used or
+ * tested.
+ *
+ * @param port port to map
+ * @param is_tcp GNUNET_YES to map TCP, GNUNET_NO for UDP
+ * @param ac function to call with mapping result
+ * @param ac_cls closure for 'ac'
+ * @return NULL on error
+ */
+struct GNUNET_NAT_MiniHandle *
+GNUNET_NAT_mini_map_start (uint16_t port, int is_tcp,
+                           GNUNET_NAT_AddressCallback ac, void *ac_cls);
+
+
+/**
+ * Remove a mapping created with (mini)upnpc.  Calling
+ * this function will give 'upnpc' 1s to remove tha mapping,
+ * so while this function is non-blocking, a task will be
+ * left with the scheduler for up to 1s past this call.
+ *
+ * @param mini the handle
+ */
+void
+GNUNET_NAT_mini_map_stop (struct GNUNET_NAT_MiniHandle *mini);
+
+
+/**
+ * Handle to auto-configuration in progress.
+ */
+struct GNUNET_NAT_AutoHandle;
+
+
+/**
+ * Function called with the result from the autoconfiguration.
+ *
+ * @param cls closure
+ * @param diff minimal suggested changes to the original configuration
+ *             to make it work (as best as we can)
+ */
+typedef void (*GNUNET_NAT_AutoResultCallback)(void *cls,
+                                             const struct GNUNET_CONFIGURATION_Handle *diff);
+
+
+/**
+ * Start auto-configuration routine.  The resolver service should
+ * be available when this function is called.
+ *
+ * @param cfg initial configuration
+ * @param cb function to call with autoconfiguration result
+ * @param cb_cls closure for cb
+ * @return handle to cancel operation
+ */
+struct GNUNET_NAT_AutoHandle *
+GNUNET_NAT_autoconfig_start (const struct GNUNET_CONFIGURATION_Handle *cfg,
+                            GNUNET_NAT_AutoResultCallback cb,
+                            void *cb_cls);
+                            
+
+/**
+ * Abort autoconfiguration.
+ *
+ * @param ah handle for operation to abort
+ */
+void
+GNUNET_NAT_autoconfig_cancel (struct GNUNET_NAT_AutoHandle *ah);
 
-#endif 
+#endif
 
 /* end of gnunet_nat_lib.h */