does not terminate on invalid uri

[oweals/gnunet.git] / src / exit / exit.conf

diff --git a/src/exit/exit.conf b/src/exit/exit.conf
index bd3fd0df12b350eb29d8c9fd64cb3e7447ae3840..aadcee47f477cb295c92ed91a400002809054024 100644 (file)
--- a/src/exit/exit.conf
+++ b/src/exit/exit.conf
@@ -1,20 +1,28 @@
 [exit]
-CONFIG = $DEFAULTCONFIG
 BINARY = gnunet-daemon-exit
 
 # IPv6 address for the TUN interface (must be changed as this
 # must be within the global IPv6 range of your system!)
-IPV6ADDR = 1234:1::1
+IPV6ADDR = 2001:DB8::1
 
 # Prefix for our IPv6 subnet on the TUN interface. 
-IPV6PREFIX = 32
+IPV6PREFIX = 64
 
 # IPv4 address to use on our TUN interface (may need to be
 # changed to avoid conflicts with existing addresses on your system).
-IPV4ADDR = 10.10.1.1
+# Use RFC 3927-style link-local address
+IPV4ADDR = 169.254.86.1
 
 # Netmask for the IPv4 subnet on the TUN interface.
-IPV4MASK = 255.255.0.0
+IPV4MASK = 255.255.255.0
+
+# Regular expression matching IPv4 addresses in binary (32 values of 0 or 1) 
+# format for which this system is willing to serve as an exit.
+EXIT_RANGE_IPV4_REGEX = (0|1)*
+
+# Regular expression matching IPv4 addresses in binary (128 values of 0 or 1) 
+# format for which this system is willing to serve as an exit.
+EXIT_RANGE_IPV6_REGEX = (0|1)*
 
 
 # Name of the (virtual) tunnel interface the exit daemon will manage
@@ -35,6 +43,18 @@ EXIT_IPV4 = NO
 # Set this to YES to allow exiting this system via IPv6 to the Internet
 EXIT_IPV6 = NO
 
+# This option should be set to YES to allow the DNS service to 
+# perform lookups against the locally configured DNS resolver.
+# (set to "NO" if no normal ISP is locally available and thus
+# requests for normal ".com"/".org"/etc. must be routed via 
+# the GNUnet VPN (the GNUNET PT daemon then needs to be configured
+# to intercept and route DNS queries via mesh).
+# Set this to YES to allow using this system for DNS queries.
+EXIT_DNS = NO
+
+# Set this to an IPv4 or IPv6 address of a DNS resolver to use for DNS queries
+DNS_RESOLVER = 8.8.8.8
+
 # For IPv4-services offered by this peer, we need to at least enable IPv4
 ENABLE_IPV4 = YES