/*
This file is part of GNUnet.
- (C) 2010,2011 Christian Grothoff (and other contributing authors)
+ Copyright (C) 2010-2015 GNUnet e.V.
- GNUnet is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published
- by the Free Software Foundation; either version 3, or (at your
- option) any later version.
+ GNUnet is free software: you can redistribute it and/or modify it
+ under the terms of the GNU Affero General Public License as published
+ by the Free Software Foundation, either version 3 of the License,
+ or (at your option) any later version.
GNUnet is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with GNUnet; see the file COPYING. If not, write to the
- Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA.
+ Affero General Public License for more details.
+
+ You should have received a copy of the GNU Affero General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
- * @file ats/ats_api.c
- * @brief automatic transport selection API
+ * @file ats/test_ats_api.c
+ * @brief test ATS
* @author Christian Grothoff
- * @author Matthias Wachs
- *
- * TODO:
- * - write test case
- * - extend API to get performance data
- * - implement simplistic strategy based on say 'lowest latency' or strict ordering
- * - extend API to get peer preferences, implement proportional bandwidth assignment
- * - re-implement API against a real ATS service (!)
*/
#include "platform.h"
-#include "gnunet_ats_service.h"
-
-#define VERBOSE GNUNET_EXTRA_LOGGING
-
-#define VERBOSE_ARM GNUNET_EXTRA_LOGGING
-
-#define START_ARM GNUNET_YES
-
-
-static struct GNUNET_CONFIGURATION_Handle *cfg;
-
-static struct GNUNET_ATS_SchedulingHandle *ats;
-
-static void
-alloc_cb (void *cls, const struct GNUNET_PeerIdentity *peer,
- const char *plugin_name, struct Session *session,
- const void *plugin_addr, size_t plugin_addr_len,
- struct GNUNET_BANDWIDTH_Value32NBO bandwidth)
-{
-
-}
+#include "test_ats_lib.h"
-static int
-check ()
-{
- int ret = 0;
+/**
+ * Global timeout for the testcase.
+ */
+#define TIMEOUT GNUNET_TIME_relative_multiply (GNUNET_TIME_UNIT_SECONDS, 3)
- cfg = GNUNET_CONFIGURATION_create ();
- if (GNUNET_SYSERR == GNUNET_CONFIGURATION_load (cfg, "test_ats_api.conf"))
+/**
+ * Definition of the test as a sequence of commands.
+ */
+static struct Command test_commands[] = {
+ {
+ .code = CMD_ADD_ADDRESS,
+ .label = "add-address-0-0",
+ .details.add_address = {
+ .pid = 0,
+ .addr_num = 0,
+ .addr_flags = GNUNET_HELLO_ADDRESS_INFO_NONE,
+ .session = 0,
+ .properties = {
+ .scope = GNUNET_ATS_NET_LAN
+ }
+ }
+ },
+ /* 1: adding same address again should fail */
+ {
+ .code = CMD_ADD_ADDRESS,
+ .label = "add-address-0-0:FAIL",
+ .details.add_address = {
+ .pid = 0,
+ .addr_num = 0,
+ .addr_flags = GNUNET_HELLO_ADDRESS_INFO_NONE,
+ .session = 0,
+ .properties = {
+ .scope = GNUNET_ATS_NET_LAN
+ },
+ .expect_fail = 1
+ }
+ },
+ /* 2: some solver still require explicit start */
+ {
+ .code = CMD_REQUEST_CONNECTION_START,
+ .label = "request-0",
+ .details.request_connection_start = {
+ .pid = 0
+ }
+ },
+ /* 3: check we got an address */
+ {
+ .code = CMD_AWAIT_ADDRESS_SUGGESTION,
+ .details.await_address_suggestion = {
+ .add_label = "add-address-0-0"
+ }
+ },
+ /* 4: check monitor also got the address */
+ {
+ .code = CMD_AWAIT_ADDRESS_INFORMATION,
+ .details.await_address_information = {
+ .add_label = "add-address-0-0"
+ }
+ },
+ /* 5: test session API */
+ {
+ .code = CMD_ADD_SESSION,
+ .label = "add-session-0-0-1",
+ .details.add_session = {
+ .add_label ="add-address-0-0",
+ .session = 1
+ }
+ },
{
- GNUNET_CONFIGURATION_destroy (cfg);
- return -1;
+ .code = CMD_DEL_SESSION,
+ .details.del_session = {
+ .add_session_label = "add-session-0-0-1",
+ }
+ },
+ /* 7: test preference API */
+ {
+ .code = CMD_CHANGE_PREFERENCE,
+ .details.change_preference = {
+ .pid = 0
+ /* FIXME: preference details */
+ }
+ },
+ {
+ .code = CMD_PROVIDE_FEEDBACK,
+ .details.provide_feedback = {
+ .pid = 0,
+ .scope = { 50LL }
+ /* FIXME: preference details */
+ }
+ },
+ /* 9: test sanity check address listing */
+ {
+ .code = CMD_LIST_ADDRESSES,
+ .details.list_addresses = {
+ .pid = 0,
+ .all = 1,
+ .min_calls = 2, // ?
+ .max_calls = 2,
+ .min_active_calls = 1,
+ .max_active_calls = 1
+ }
+ },
+ /* 10: remove address testing */
+ {
+ .code = CMD_DEL_ADDRESS,
+ .details.del_address = {
+ .add_label = "add-address-0-0"
+ }
+ },
+ /* 11: check we got disconnected */
+ {
+ .code = CMD_AWAIT_DISCONNECT_SUGGESTION,
+ .details.await_disconnect_suggestion = {
+ .pid = 0
+ }
+ },
+ /* 12: just for symmetry, also stop asking for the connection */
+ {
+ .code = CMD_REQUEST_CONNECTION_STOP,
+ .details.request_connection_stop = {
+ .connect_label = "request-0",
+ }
+ },
+ /* 13: add address again */
+ {
+ .code = CMD_ADD_ADDRESS,
+ .label = "add-address-0-0:1",
+ .details.add_address = {
+ .pid = 0,
+ .addr_num = 0,
+ .session = 0,
+ .properties = {
+ .scope = GNUNET_ATS_NET_LAN
+ }
+ }
+ },
+ /* 14: some solver still require explicit start */
+ {
+ .code = CMD_REQUEST_CONNECTION_START,
+ .label = "request-0",
+ .details.request_connection_start = {
+ .pid = 0
+ }
+ },
+ /* 15: check we got an address */
+ {
+ .code = CMD_AWAIT_ADDRESS_SUGGESTION,
+ .details.await_address_suggestion = {
+ .add_label = "add-address-0-0:1"
+ }
+ },
+ /* 16: add alternative address */
+ {
+ .code = CMD_ADD_ADDRESS,
+ .label = "add-address-0-1",
+ .details.add_address = {
+ .pid = 0,
+ .addr_num = 1,
+ .addr_flags = GNUNET_HELLO_ADDRESS_INFO_NONE,
+ .session = 0,
+ .properties = {
+ .scope = GNUNET_ATS_NET_LAN
+ }
+ }
+ },
+ /* 17: remove original address */
+ {
+ .code = CMD_DEL_ADDRESS,
+ .details.del_address = {
+ .add_label = "add-address-0-0:1"
+ }
+ },
+ /* 18: check we switched to alternative address */
+ {
+ .code = CMD_AWAIT_ADDRESS_SUGGESTION,
+ .details.await_address_suggestion = {
+ .add_label = "add-address-0-1"
+ }
+ },
+ /* 19: remove alternative address */
+ {
+ .code = CMD_DEL_ADDRESS,
+ .details.del_address = {
+ .add_label = "add-address-0-1"
+ }
+ },
+ /* 20: check we got disconnected */
+ {
+ .code = CMD_AWAIT_DISCONNECT_SUGGESTION,
+ .details.await_disconnect_suggestion = {
+ .pid = 0
+ }
+ },
+ /* 21: just for symmetry, also stop asking for the connection */
+ {
+ .code = CMD_REQUEST_CONNECTION_STOP,
+ .details.request_connection_stop = {
+ .connect_label = "request-0",
+ }
+ },
+ /* Test ends successfully */
+ {
+ .code = CMD_END_PASS
}
+};
- ats = GNUNET_ATS_init (cfg, alloc_cb, NULL);
- GNUNET_assert (ats != NULL);
- GNUNET_ATS_shutdown (ats);
-
- GNUNET_CONFIGURATION_destroy (cfg);
- return ret;
-}
int
-main (int argc, char *argv[])
+main (int argc,
+ char *argv[])
{
- int ret;
-
- GNUNET_log_setup ("test-ats-api",
-#if VERBOSE
- "DEBUG",
-#else
- "WARNING",
-#endif
- NULL);
+ return TEST_ATS_run (argc,
+ argv,
+ test_commands,
+ TIMEOUT);
+}
- ret = check ();
- return ret;
-}
+/* end of file test_ats_api.c */
projects / oweals / gnunet.git / blobdiff