# How many connections can happen simultaneously?
MAX_OUTSTANDING_CONNECTIONS = 50
+# Should we clean up the files on peer group shutdown?
+DELETE_FILES = YES
+
[client]
HOME = $SERVICEHOME
-[transport-tcp]
-# Use 0 to ONLY advertise as a peer behind NAT (no port binding)
-PORT = 2086
-ADVERTISED_PORT = 2086
-
+[nat]
# Are we behind NAT?
-BEHIND_NAT = YES
+BEHIND_NAT = NO
# Is the NAT hole-punched?
PUNCHED_NAT = NO
-# Disable UPNP by default until it gets cleaner!
+# Enable UPNP by default?
ENABLE_UPNP = NO
+# Use addresses from the local network interfaces (inluding loopback, but also others)
+USE_LOCALADDR = YES
+
+# Use address obtained from a DNS lookup of our hostname
+USE_HOSTNAME = NO
+
# External IP address of the NAT box (if known); IPv4 dotted-decimal ONLY at this time (should allow DynDNS!)
# normal interface IP address for non-NATed peers;
# possibly auto-detected (using UPnP) if possible if not specified
# Should we use ICMP-based NAT traversal to try connect to NATed peers
# or, if we are behind NAT, to allow connections to us?
-ENABLE_ICMP_CLIENT = YES
-ENABLE_ICMP_SERVER = YES
+ENABLE_ICMP_CLIENT = NO
+ENABLE_ICMP_SERVER = NO
# IP address of the interface connected to the NAT box; IPv4 dotted-decimal ONLY;
# normal interface IP address for non-NATed peers;
# likely auto-detected (via interface list) if not specified (!)
# INTERNAL_ADDRESS =
-# Only bind to a specific IP address; if both are given, this should be idential to INTERNAL_ADDRESS
-# (but use different: this one restricts our bind!)
-# BINDTO =
+# Disable IPv6 support
+DISABLEV6 = NO
-TIMEOUT = 300000
+# How often do we query the DNS resolver
+# for our hostname (to get our own IP), in ms
+HOSTNAME_DNS_FREQUENCY = 1200000
+
+# How often do we iterate over our
+# network interfaces to check for changes
+# in our IP address? in ms
+IFC_SCAN_FREQUENCY = 3000000
+
+# How often do we query the DNS resolver
+# for our hostname (to get our own IP), in ms
+DYNDNS_FREQUENCY = 140000
+
+[gnunet-nat-server]
+HOSTNAME = gnunet.org
+PORT = 5724
+
+[transport-tcp]
+# Use 0 to ONLY advertise as a peer behind NAT (no port binding)
+PORT = 2086
+ADVERTISED_PORT = 2086
+
+# Maximum number of open TCP connections allowed
+MAX_CONNECTIONS = 128
+
+TIMEOUT = 5000
-# Disable IPv6 support
-# DISABLEV6 =
# ACCEPT_FROM =
# ACCEPT_FROM6 =
# REJECT_FROM =
# REJECT_FROM6 =
+# BINDTO =
+
+MAX_CONNECTIONS = 128
+
[transport-udp]
PORT = 2086
-# BEHIND_NAT =
-# BINDTO =
-# ALLOW_NAT =
-# ONLY_NAT_ADDRESSES =
-# INTERNAL_ADDRESS =
-# EXTERNAL_ADDRESS =
+
+MAX_BPS = 1000000
+
[transport-http]
PORT = 1080
+MAX_CONNECTIONS = 128
[transport-https]
PORT = 4433
+CRYPTO_INIT = NORMAL
+KEY_FILE = https.key
+CERT_FILE = https.cert
+MAX_CONNECTIONS = 128
+
+
+[transport-wlan]
+# Name of the interface in monitor mode (typically monX)
+INTERFACE = mon0
+# Real hardware, no testing
+TESTMODE = 0
+
[arm]
PORT = 2087
HOME = $SERVICEHOME
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-service-transport
+#PREFIX = valgrind
NEIGHBOUR_LIMIT = 50
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
# REJECT_FROM6 =
# PREFIX =
+[ats]
+AUTOSTART = YES
+PORT = 2098
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-ats
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+UNIXPATH = /tmp/gnunet-service-ats.sock
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+
+TOTAL_QUOTA_IN = 65536
+TOTAL_QUOTA_OUT = 65536
+# ATS options
+DUMP_MLP = NO
+DUMP_SOLUTION = NO
+DUMP_OVERWRITE = NO
+DUMP_MIN_PEERS = 0
+DUMP_MIN_ADDRS = 0
+DUMP_OVERWRITE = NO
+ATS_MIN_INTERVAL = 15000
+ATS_EXEC_INTERVAL = 30000
+
+
[core]
AUTOSTART = YES
PORT = 2092
HOSTNAME = localhost
HOME = $SERVICEHOME
CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-service-core
+BINARY = gnunet-service-core-new
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
# quotas are in bytes per second now!
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
+DELAY = YES
CONTENT_CACHING = YES
CONTENT_PUSHING = YES
QUOTA = 1024000
[block]
-PLUGINS = fs dht test
+PLUGINS = fs dht test dns
+
+[mesh]
+AUTOSTART = YES
+PORT = 2096
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-mesh
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+UNIXPATH = /tmp/gnunet-service-mesh.sock
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+
+[nse]
+AUTOSTART = YES
+PORT = 2097
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-nse
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+UNIXPATH = /tmp/test-nse-service-nse.unix
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+PROOFFILE = $SERVICEHOME/.nse-proof
+HISTOGRAM = $SERVICEHOME/nse-history.log
+
+# How 'slowly' should the proof-of-work be constructed (delay
+# between rounds in ms); sane values between 0 and ~1000.
+WORKDELAY = 5
+
+# Note: changing any of the values below will make this peer
+# completely incompatible with other peers!
+INTERVAL = 3600000
+WORKBITS = 20
+
+
+[vpn]
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-daemon-vpn
+IPV6ADDR = 1234::1
+IPV6PREFIX = 32
+IPV4ADDR = 10.11.10.1
+IPV4MASK = 255.255.0.0
+VIRTDNS = 10.11.10.2
+IFNAME = vpn-gnunet
+
+[exit]
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-daemon-exit
+IPV6ADDR = 1234:1::1
+IPV6PREFIX = 32
+IPV4ADDR = 10.10.1.1
+IPV4MASK = 255.255.0.0
+IFNAME = exit-gnunet
+ENABLE_UDP = NO
+ENABLE_TCP = NO
+
+[dns]
+AUTOSTART = YES
+PORT = 0
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-dns
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+UNIXPATH = /tmp/gnunet-service-dns.sock
+PROVIDE_EXIT = NO
+