[PATHS]
-SERVICEHOME = /var/lib/gnunet/
-DEFAULTCONFIG = /etc/gnunetd.conf
+SERVICEHOME = ~/.gnunet/
+# SERVICEHOME = /var/lib/gnunet/
+# DEFAULTCONFIG = /etc/gnunet.conf
+# If 'DEFAULTCONFIG' is not defined, the current
+# configuration file is assumed to be the default,
+# which is what we want by default...
[gnunetd]
HOSTKEY = $SERVICEHOME/.hostkey
[TESTING]
WEAKRANDOM = NO
+# How long before failing a connection?
+CONNECT_TIMEOUT = 30
+# How many connect attempts should we make?
+CONNECT_ATTEMPTS = 3
+# How many connections can happen simultaneously?
+MAX_OUTSTANDING_CONNECTIONS = 50
+# Should we clean up the files on peer group shutdown?
+DELETE_FILES = YES
+
+[client]
+HOME = $SERVICEHOME
+
+[nat]
+# Are we behind NAT?
+BEHIND_NAT = NO
+
+# Is the NAT hole-punched?
+PUNCHED_NAT = NO
+
+# Enable UPNP by default?
+ENABLE_UPNP = NO
+
+# Use addresses from the local network interfaces (inluding loopback, but also others)
+USE_LOCALADDR = YES
+
+# Use address obtained from a DNS lookup of our hostname
+USE_HOSTNAME = NO
+
+# External IP address of the NAT box (if known); IPv4 dotted-decimal ONLY at this time (should allow DynDNS!)
+# normal interface IP address for non-NATed peers;
+# possibly auto-detected (using UPnP) if possible if not specified
+# EXTERNAL_ADDRESS =
+
+# Should we use ICMP-based NAT traversal to try connect to NATed peers
+# or, if we are behind NAT, to allow connections to us?
+ENABLE_ICMP_CLIENT = NO
+ENABLE_ICMP_SERVER = NO
+
+# IP address of the interface connected to the NAT box; IPv4 dotted-decimal ONLY;
+# normal interface IP address for non-NATed peers;
+# likely auto-detected (via interface list) if not specified (!)
+# INTERNAL_ADDRESS =
+
+# Disable IPv6 support
+DISABLEV6 = NO
+
+# How often do we query the DNS resolver
+# for our hostname (to get our own IP), in ms
+HOSTNAME_DNS_FREQUENCY = 1200000
+
+# How often do we iterate over our
+# network interfaces to check for changes
+# in our IP address? in ms
+IFC_SCAN_FREQUENCY = 3000000
+
+# How often do we query the DNS resolver
+# for our hostname (to get our own IP), in ms
+DYNDNS_FREQUENCY = 140000
+
+[gnunet-nat-server]
+HOSTNAME = gnunet.org
+PORT = 5724
[transport-tcp]
+# Use 0 to ONLY advertise as a peer behind NAT (no port binding)
PORT = 2086
-TIMEOUT = 300000
-ALLOW_SHUTDOWN = NO
-# MAXBUF =
-# DISABLEV6 =
-# BINDTO =
+ADVERTISED_PORT = 2086
+
+# Maximum number of open TCP connections allowed
+MAX_CONNECTIONS = 128
+
+TIMEOUT = 5000
+
# ACCEPT_FROM =
# ACCEPT_FROM6 =
# REJECT_FROM =
# REJECT_FROM6 =
+# BINDTO =
+
+MAX_CONNECTIONS = 128
+
+
+[transport-udp]
+PORT = 2086
+
+MAX_BPS = 1000000
+
+
+[transport-http]
+PORT = 1080
+MAX_CONNECTIONS = 128
+
+[transport-https]
+PORT = 4433
+CRYPTO_INIT = NORMAL
+KEY_FILE = https.key
+CERT_FILE = https.cert
+MAX_CONNECTIONS = 128
+
+
+[transport-wlan]
+# Name of the interface in monitor mode (typically monX)
+INTERFACE = mon0
+# Real hardware, no testing
+TESTMODE = 0
[arm]
BINARY = gnunet-service-arm
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
-ALLOW_SHUTDOWN = YES
-DEFAULTSERVICES = resolver transport core
+DEFAULTSERVICES = topology hostlist
+UNIXPATH = /tmp/gnunet-service-arm.sock
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+# GLOBAL_POSTFIX = -l $SERVICEHOME/{}-logs
# GLOBAL_PREFIX =
# USERNAME =
# MAXBUF =
# PREFIX =
[statistics]
+AUTOSTART = YES
PORT = 2088
HOSTNAME = localhost
HOME = $SERVICEHOME
BINARY = gnunet-service-statistics
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
-ALLOW_SHUTDOWN = YES
+UNIXPATH = /tmp/gnunet-service-statistics.sock
+UNIX_MATCH_UID = NO
+UNIX_MATCH_GID = YES
+# DISABLE_SOCKET_FORWARDING = NO
# USERNAME =
# MAXBUF =
# TIMEOUT =
# PREFIX =
[resolver]
+AUTOSTART = YES
PORT = 2089
HOSTNAME = localhost
HOME = $SERVICEHOME
BINARY = gnunet-service-resolver
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
-ALLOW_SHUTDOWN = YES
+UNIXPATH = /tmp/gnunet-service-resolver.sock
+UNIX_MATCH_UID = NO
+UNIX_MATCH_GID = NO
+# DISABLE_SOCKET_FORWARDING = NO
# USERNAME =
# MAXBUF =
# TIMEOUT =
# PREFIX =
[peerinfo]
+AUTOSTART = YES
PORT = 2090
HOSTNAME = localhost
HOME = $SERVICEHOME
BINARY = gnunet-service-peerinfo
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
-ALLOW_SHUTDOWN = YES
+UNIXPATH = /tmp/gnunet-service-peerinfo.sock
+UNIX_MATCH_UID = NO
+UNIX_MATCH_GID = YES
+# DISABLE_SOCKET_FORWARDING = NO
# USERNAME =
# MAXBUF =
# TIMEOUT =
# REJECT_FROM6 =
# PREFIX =
HOSTS = $SERVICEHOME/data/hosts/
-TRUST = $SERVICEHOME/data/credit/
[transport]
+AUTOSTART = YES
PORT = 2091
HOSTNAME = localhost
HOME = $SERVICEHOME
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-service-transport
+#PREFIX = valgrind
NEIGHBOUR_LIMIT = 50
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
-ALLOW_SHUTDOWN = YES
+PLUGINS = tcp
+UNIXPATH = /tmp/gnunet-service-transport.sock
+BLACKLIST_FILE = $SERVICEHOME/blacklist
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+# DISABLE_SOCKET_FORWARDING = NO
# USERNAME =
# MAXBUF =
# TIMEOUT =
# REJECT_FROM6 =
# PREFIX =
+[ats]
+AUTOSTART = YES
+PORT = 2098
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-ats
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+UNIXPATH = /tmp/gnunet-service-ats.sock
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+
+TOTAL_QUOTA_IN = 65536
+TOTAL_QUOTA_OUT = 65536
+# ATS options
+DUMP_MLP = NO
+DUMP_SOLUTION = NO
+DUMP_OVERWRITE = NO
+DUMP_MIN_PEERS = 0
+DUMP_MIN_ADDRS = 0
+DUMP_OVERWRITE = NO
+ATS_MIN_INTERVAL = 15000
+ATS_EXEC_INTERVAL = 30000
+
+
[core]
+AUTOSTART = YES
PORT = 2092
HOSTNAME = localhost
HOME = $SERVICEHOME
CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-service-core
+BINARY = gnunet-service-core-new
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
-ALLOW_SHUTDOWN = YES
-# quotas are in bytes per minute now!
-TOTAL_QUOTA_IN = 3932160
-TOTAL_QUOTA_OUT = 3932160
+# quotas are in bytes per second now!
+TOTAL_QUOTA_IN = 65536
+TOTAL_QUOTA_OUT = 65536
+UNIXPATH = /tmp/gnunet-service-core.sock
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+# DISABLE_SOCKET_FORWARDING = NO
+# DEBUG = YES
# USERNAME =
# MAXBUF =
# TIMEOUT =
[hostlist]
# port for hostlist http server
HTTPPORT = 8080
-HOSTNAME = localhost
HOME = $SERVICEHOME
+HOSTLISTFILE = $SERVICEHOME/hostlist/learned.data
CONFIG = $DEFAULTCONFIG
BINARY = gnunet-daemon-hostlist
# consider having "-e" as default as well once implemented
OPTIONS = -b
-SERVERS = http://gnunet.org:8080/
+SERVERS = http://v9.gnunet.org:58080/
# proxy for downloading hostlists
HTTP-PROXY =
[datastore]
+AUTOSTART = YES
+UNIXPATH = /tmp/gnunet-service-datastore.sock
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
PORT = 2093
HOSTNAME = localhost
HOME = $SERVICEHOME
BINARY = gnunet-service-datastore
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
-ALLOW_SHUTDOWN = YES
QUOTA = 100000000
BLOOMFILTER = $SERVICEHOME/fs/bloomfilter
DATABASE = sqlite
+# DISABLE_SOCKET_FORWARDING = NO
[datastore-sqlite]
FILENAME = $SERVICEHOME/datastore/sqlite.db
+[datastore-postgres]
+CONFIG = connect_timeout=10; dbname=gnunet
+
+[datastore-mysql]
+DATABASE = gnunet
+CONFIG = ~/.my.cnf
+# USER = gnunet
+# PASSWORD =
+# HOST = localhost
+# PORT = 3306
+
+[datacache-mysql]
+DATABASE = gnunetcheck
+CONFIG = ~/.my.cnf
+# USER = gnunet
+# PASSWORD =
+# HOST = localhost
+# PORT = 3306
+
+
[fs]
+AUTOSTART = YES
INDEXDB = $SERVICEHOME/idxinfo.lst
+TRUST = $SERVICEHOME/data/credit/
+IDENTITY_DIR = $SERVICEHOME/identities/
+STATE_DIR = $SERVICEHOME/persistence/
+UPDATE_DIR = $SERVICEHOME/updates/
PORT = 2094
HOSTNAME = localhost
HOME = $SERVICEHOME
BINARY = gnunet-service-fs
ACCEPT_FROM = 127.0.0.1;
ACCEPT_FROM6 = ::1;
-ALLOW_SHUTDOWN = YES
+
+DELAY = YES
+CONTENT_CACHING = YES
+CONTENT_PUSHING = YES
+
+UNIXPATH = /tmp/gnunet-service-fs.sock
+UNIX_MATCH_UID = NO
+UNIX_MATCH_GID = YES
+# DISABLE_SOCKET_FORWARDING = NO
+# DEBUG = YES
+MAX_PENDING_REQUESTS = 65536
+# Maximum frequency we're allowed to poll the datastore
+# for content for migration (can be used to reduce
+# GNUnet's disk-IO rate)
+MIN_MIGRATION_DELAY = 100
+EXPECTED_NEIGHBOUR_COUNT = 128
+
+[dht]
+AUTOSTART = YES
+PORT = 2095
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-dht
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+BUCKET_SIZE = 4
+UNIXPATH = /tmp/gnunet-service-dht.sock
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+# DISABLE_SOCKET_FORWARDING = NO
+# DEBUG = YES
+# USERNAME =
+# MAXBUF =
+# TIMEOUT =
+# DISABLEV6 =
+# BINDTO =
+# REJECT_FROM =
+# REJECT_FROM6 =
+# PREFIX =
+# DO_FIND_PEER =
+# STRICT_KADEMLIA =
+# USE_MAX_HOPS =
+# MAX_HOPS =
+# REPUBLISH = YES
+# REPLICATION_FREQUENCY = 60
+# STOP_ON_CLOSEST =
+# STOP_FOUND =
+# CONVERGE_MODIFIER =
+
+
+[dhtcache]
+DATABASE = sqlite
+QUOTA = 1024000
+
+[block]
+PLUGINS = fs dht test dns
+
+[mesh]
+AUTOSTART = YES
+PORT = 2096
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-mesh
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+UNIXPATH = /tmp/gnunet-service-mesh.sock
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+
+[nse]
+AUTOSTART = YES
+PORT = 2097
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-nse
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+UNIXPATH = /tmp/test-nse-service-nse.unix
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+PROOFFILE = $SERVICEHOME/.nse-proof
+HISTOGRAM = $SERVICEHOME/nse-history.log
+
+# How 'slowly' should the proof-of-work be constructed (delay
+# between rounds in ms); sane values between 0 and ~1000.
+WORKDELAY = 5
+
+# Note: changing any of the values below will make this peer
+# completely incompatible with other peers!
+INTERVAL = 3600000
+WORKBITS = 20
+
+
+[vpn]
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-daemon-vpn
+IPV6ADDR = 1234::1
+IPV6PREFIX = 32
+IPV4ADDR = 10.11.10.1
+IPV4MASK = 255.255.0.0
+VIRTDNS = 10.11.10.2
+IFNAME = vpn-gnunet
+
+[exit]
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-daemon-exit
+IPV6ADDR = 1234:1::1
+IPV6PREFIX = 32
+IPV4ADDR = 10.10.1.1
+IPV4MASK = 255.255.0.0
+IFNAME = exit-gnunet
+ENABLE_UDP = NO
+ENABLE_TCP = NO
+
+[dns]
+AUTOSTART = YES
+PORT = 0
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-dns
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+UNIXPATH = /tmp/gnunet-service-dns.sock
+PROVIDE_EXIT = NO