0.9.0pre2:
* BIG CORE REFACTORING:
- - fix transport service API (ATS!)
- - fix transport plugin API (ATS!)
- - actually transmit ATS data through core API
- - fix FS 'latency' ATS function
- - fix DV
+ - fix transport plugin API (ATS!) [mw]
+ - fix DV [nate]
* Integration test:
- test bootstrapping via hostlist + transport/core/dht connect
-
-0.9.0pre3:
-* Determine RC bugs and fix those (release should have no known real bugs)
-* ARM: [CG/Safey]
- - start_forwarding should not use 'listen_info->service_addr' for connecting since that one can be 0.0.0.0;
- if it is, we need to use (IPv4 & IPv6) loopback [LRN]
- - better tracking of which config changes actually need to cause process restarts by ARM.
- - handle gnunet-arm -k in combination with auto-start magic (what is the right thing here?)
- - discover dependencies between services
* CORE:
- - provide 'reliable' P2P transmission API and queueing infrastructure
- Jun 27 11:51:54 core-7670 ERROR Assertion failed at gnunet-service-core.c:3616.
(transport notified us that we connected to ourselves!!!; can we still reproduce this?)
-* DHT: [Nate]
- - track paths content travels (PUT, reply-to-get) in messages,
- pass to client (client API & protocol already support this!)
-* DATASTORE:
- - GNUNET_DATASTORE_cancel method not tested
-* TESTING: [Nate]
- - test basic peer re-configure
-* TOPOLOGY: [Nate]
- - needs more testing (especially F2F topology) & transport blacklisting
-* TRANSPORT-TCP [MW]:
- - should use hash map to look up sessions
-* TRANSPORT:
+ => Also, we may want to issue a 'connect to ourselves' automatically on start of
+ core_api AND allow messages to self [CG/phillip]
+
+0.9.0pre3:
+* TRANSPORT: [MW]
- [#1585, #1583, #1582] transport-level disconnect (i.e. TCP) does not cause core-level
disconnect in a timely fashion (waits for connection timeout);
need to figure a way to make it near-instant in those cases
likely good enough until we get ATS going; still should be tested...
=> "peers connected (transport)" now instantly goes to ZERO (core statistic),
but "established sessions" stays up...
-* NAT/UPNP: [Milan]
- - finalize API design
+* NAT/UPNP: [Milan / Ayush / MW]
- [#1609] code clean up
- testing
- - integration with transport service
- - also do UPnP-based (external) IP detection
- (Note: build library always, build UPnP service when dependencies like libxml2 are available)
+ - integration with transport service:
+ + test TCP
+ + implement UDP, HTTP/HTTPS
+* DHT: [Nate]
+ - track paths content travels (PUT, reply-to-get) in messages,
+ pass to client (client API & protocol already support this!)
* FS: [CG]
- - library:
- + reconstruct IBLOCKS from DBLOCKS if possible (during download; see FIXME in fs_download)
- + add support for pushing "already seen" search results to FS service for bloomfilter
- + use different 'priority' for probe downloads vs. normal downloads
- implement multi-peer FS performance tests
+ insert
+ download
+ search
- + unindex
- - implement anonymity level > 1
- - re-implement gnunet-auto-share
-* GNUNET-GTK:
- - finish publish dialog details:
- + normalize keywords (edit subdialog)
- - implement download by URI dialog; figure out where to display those downloads!
- - figure out where in the GUI we should show active uploads/unindex operations and allow aborts
- - implement unindex operation (use dialog with all indexed files for selection)
- - events:
+* GNUNET-GTK: [CG]
+ - figure out where in the GUI we should show active upload operations and allow aborts
+ - handle events:
+ search error
+ publish error
- + unindex error
-* MONKEY: [Safey]
- - better crash management (attach debugging support, capture and analyze
- debug output, detect random vs. deterministic crashes)
- - '-m EMAIL' option for alternative e-mail TO
- - '-f FILENAME' option to write report to file instead of e-mail (for testing!)
+* Determine RC bugs and fix those (release should have no known real bugs)
0.9.0:
-* Determine RC bugs and fix those (release should have no known real bugs)
-* UTIL:
- - only connect() sockets that are ready (select()) [Nils]
- [On W32, we need to select after calling socket before doing connect etc.]
-* new webpage: [BL]
- - convert documentation pages to books
+* new webpage:
- update books (especially for developers)
- make a NICE download page and figure out how to enable developers to publish TGZs nicely
- port "contact" page
- - add content type for "todo" items
-* TBENCH: [MW]
- - good to have for transport/DV evaluation!
-* TRACEKIT: [MW]
- - good to have for DHT evaluation!
-* DHT: [Nate]
- - performance tests
-* BLOCK:
- - more testing (KBlock, SBlock, NBlock)
* FS migration:
- - exclude content that will "soon" expire from migration?
- - exclude content with zero-anonymity from gap migration?
+ - exclude content that will "soon" expire from migration
- make migration data rate & datastore IO-rate configurable
- exclude certain peers as targets (based on hash values) in each
iteration => same peer can only be picked every n-th iteration
for the same content => fewer duplicate sending!
-
+* big code review
+* Determine RC bugs and fix those (release should have no known real bugs)
0.9.1:
* TRANSPORT: [MW]
- WiFi transport backend [DB]
- - implement gnunet-transport (transport configurator / tester)
- Implement method of learning our external addresses from
other peers; need some kind of threshold-based
scheme, limiting both the total number of addresses that we accept
=> If MiM attacker uses vetoed address, blacklist the specific IP for
the presumed neighbour!
- need to periodically probe latency/transport cost changes & possibly switch transport
- - should use hash map to look up Neighbours (service AND plugins!)
-* DV: [Nate]
+* DV: [Nate?]
- proper bandwidth allocation
- performance tests
* PEERINFO:
(theoretically reduces overhead; bounds message queue size)
- merge multiple iteration requests over "all" peers in the queue
(theoretically reduces overhead; bounds messgae queue size)
-* STATISTICS: [CG]
+* STATISTICS:
- should use BIO instead of mmap
* FS: [CG]
- Remove KBlocks in gnunet-unindex (see discussion with Kenneth Almquist on gnunet-devs in 9/2009)
- use different queue prioritization for probe-downloads vs. normal downloads
+ - re-implement gnunet-auto-share
* UTIL: [CG]
- allow limiting UNIX socket access by UID/GID
* GNUNET-GTK: [CG]
- right-clicking on NS list in search dialog should open menu that allows
* viewing full meta data
* deletion of namespace info
+ - implement unindex operation (use dialog with all indexed files for selection)
+ - finish publish dialog details:
+ + normalize keywords (edit subdialog)
+ - implement download by URI dialog; figure out where to display those downloads!
+* ARM: [CG/Safey]
+ - better tracking of which config changes actually need to cause process restarts by ARM.
+ - handle gnunet-arm -k in combination with auto-start magic (what is the right thing here?)
+ - discover dependencies between services
+* MONKEY: [Safey]
+ - better crash management (attach debugging support, capture and analyze
+ debug output, detect random vs. deterministic crashes)
+ - '-m EMAIL' option for alternative e-mail TO
+ - '-f FILENAME' option to write report to file instead of e-mail (for testing!)
0.9.2:
* PEERINFO: [NN]
- testcase would be nice
- generic block support for DHT
* STATISTICS:
- - test notification-based statistics API [LT]
+ - test notification-based statistics API
- implement statistics GUI (=> start from gnunet-gtk by button!)
* PEERINFO: [NN]
- move peerinfo to new GUI (=> start from gnunet-gtk by button!)
- improved batching
- resource limit integration with ATS
* VPN [PT]
- - DNS hijacking
- - DNS exit
- TCP entry/exit
- - UDP entry/exit
- internal services
- integration with DHT routing
- optimized routes (beyond DHT/DV)