* MySQL / Postgres plugins (datastore, datacache)
* UPNP [Milan]
* ARM [Safey]
-
-Urgent items (before announcing ng.gnunet.org):
-* FS (basic anonymous FS only)
- - test multi-peer search/download
-* new webpage
- - run peer => have a 0.9.x hostlist
- - improve basic documentation (configure, dependencies, what works, etc.)
- - write minimal welcome/introduction to 0.9.x-development/webpage/status
-=> Deploy(able) development network
-
+* FS [Christian]
0.9.0pre0:
-* UTIL:
- - load: need way to determine network load (up/down)
- - trust: need *fast* way to check/update trust in peers
- (async peerinfo would not be right)
* TRANSPORT:
+ - TCP not used bi-directionally (especially important also for PONG!)
+ Need a way for plugin to tell to service that it can *reliably* transmit
+ PONGs. Need *good* way to ensure only one (plugin) session is active at
+ any given point in time; need systematic way to periodically probe latency/
+ transport cost changes
- disconnect notifications from TCP not always as nice as we might want
them to be (but how can we do this cleanly given that UDP is connectionless?)
- - TCP not used bi-directionally (especially important also for PONG!)
+ - hostlist testcase shows that (randomly) we jump to an address that
+ seems to be a plugin function *after* the plugin has been unloaded
+ (directly from scheduler); check that *all* plugin tasks are cancelled
+ after plugin is unloaded! (need better testcases for that...)
+ - implement transport API to pretty-print transport address
+ + transport_api extension (API extension!)
+ + service-transport extension (protocol extension)
+ - implement gnunet-transport (transport configurator / tester)
+ - instantly filter addresses from *other* peers that
+ are *equal* to our own address + port (i.e., localhost:2086). We
+ no longer filter those for outgoing (helps with loopback testing
+ and keeps the code clean), but we should filter strictly *impossible*
+ incoming addresses! This is for efficiency, not correctness.
+ - UPnP-based IP detection
+ (Note: build library always, build service when libxml2/etc. are available)
+ - We currently are happy to take any address told to us in a WELCOME
+ to our set of addresses; we should have some minimal threshold-based
+ scheme, limiting both the total number of addresses that we accept
+ this way as well as requiring multiple confirmations; also, we
+ should possibly try to confirm that the given address works for
+ us ourselves (loopback-style) before adding it to the list
+ [SECURITY issue]
+ + we may be able to simplify WELCOME messages (no need to add
+ addresses there anymore, but may help to learn them there anyway...).
+ + we probably want some kind of voting/counting for learning IP addresses
+ (maybe including IP addresses in ads proportional to how often others
+ report them? we at least need some protection against >64k HELLOs!),
+ + provide a way to give the user a list of "learned" IP addresses and
+ a way to easily "veto" addresses off the list!
+ => If MiM attacker uses vetoed address, blacklist the specific IP for
+ the presumed neighbour!
+ - [./transport/gnunet-service-transport.c:173]: (style) struct or union member 'TransportPlugin::rebuild' is never used
+ - [./transport/plugin_transport_tcp.c:391]: (style) struct or union member 'Plugin::address_update_task' is never used
+* FS:
+ - [./fs/gnunet-service-fs.c:208]: (style) struct or union member 'LocalGetContext::results_bf_size' is never used
+ - [./fs/gnunet-service-fs.c:501]: (style) struct or union member 'PendingRequest::used_pids_size' is never used
+ - [./fs/gnunet-service-fs.c:654]: (style) struct or union member 'ConnectedPeer::last_client_replies' is never used
+ - [./fs/gnunet-service-fs.c:669]: (style) struct or union member 'ConnectedPeer::avg_delay' is never used
+ - [./fs/gnunet-service-fs.c:675]: (style) struct or union member 'ConnectedPeer::avg_priority' is never used
+ - [./fs/gnunet-service-fs.c:688]: (style) struct or union member 'ConnectedPeer::pending_requests' is never used
+ - [./fs/gnunet-service-fs.c:694]: (style) struct or union member 'ConnectedPeer::last_p2p_replies_woff' is never used
+ - [./fs/gnunet-service-fs.c:700]: (style) struct or union member 'ConnectedPeer::last_client_replies_woff' is never used
+* CORE:
+ - SET_KEY is triggered every 2.5 minutes (after session is up); should
+ just do PING (not SET_KEY + PING)
+ - "Forcing disconnect of XXX due to inactivity" -- can happen every few MS!?
+ (disconnect does not really succeed, or what?)
+* TOPOLOGY:
+ - needs more testing (especially F2F topology)
+ - needs to re-try connecting after disconnect (currently, it
+ initially triggers a connection request, but if that connection
+ fails / goes down, it does not retry in a timely fashion;
+ cause seems to be the 'blacklist_after_attempt' being set to 1h,
+ which is rather long -- and should probably be adjusted based on
+ the number of connections / known peers)
+ - If the topology daemon crashes, peers that were put on the
+ blacklist with transport will never be removed from it (until
+ transport service dies); we should use the blacklist notification
+ API to learn about the exact set of blacklisted peers at all times
+ (FIXME: the transport_api implementation of blacklisting
+ also does not work nicely for this since it won't let us know about
+ disconnect-reconnect events and the implicit whitelisting
+ that might happen here; that's not so bad since we will
+ re-blacklist on pre-connect attempts anyway, so this is
+ a minor issue).
+ - the code uses the term 'blacklist' for both peers that are forbidden
+ to connect (i.e. F2F mode) as well as peers that we currently
+ won't try to actively connect to ourselves (since we just tried);
+ This is confusing. We need two distinct terms.
+ - move code to use hash table instead of linked list
+ - instead of periodically discarding blacklisted entries,
+ simply add task that is triggered at the right time (earlier free,
+ more balanced load)
+ - check if new HELLO learned is different from old HELLO
+ before resetting entire state!
+* UTIL:
+ - trust: need *fast* way to check/update trust in peers
+ (async peerinfo would not be right)
+ - scheduler should change OS process priority based on task priority;
+ should make better use of task priorities in general
+ - only connect() sockets that are ready (select()) [Nils]
+ [On W32, we need to select after calling socket before
+ doing connect etc.]
* STATISTICS:
- synchronous/asynchronous API (& implementation) is not nice;
=> provide notification-based API
- does not seem to work with timeouts (especially if service is not running)
+* DATACACHE:
+ - add stats (# bytes available, # bytes used, # PUTs, # GETs, # GETs satisfied)
* ARM:
- need to get rid of synchronous API for service starts (cause all kinds of problems)
[=> eliminate for need to tell ARM about service starts most of the time!] [Safey]
+ - better tracking of which config changes actually need to cause process restarts by ARM.
+ - listen for requests to discover dependencies between services (and avoid
+ having to explicitly program start requests)
+ - better crash management (attach debugging support, capture and analyze
+ debug output, detect random vs. deterministic crashes)
+ - shutdown sequence?
* HELLO:
- need function to test "equivalency" of HELLOs; use in topology!
-* TOPOLOGY:
- - needs more testing (especially F2F topology)
-* CORE:
- - needs more testing
+* FS:
+ - GAP improvements:
+ + active reply route caching design & implementation of service,
+ gap extension!
+ - gnunet-publish cannot be aborted using CTRL-C
+ - gnunet-publish segfaults if file does not exist
+ - on some systems, keyword search does not find locally published content
+ (need testcase of command-line tools!)
+ - 2-peer download is still too slow (why?)
* Module features to implement:
- advanced FS API parts
+ namespaces: fundamental namespace API
+ test basic peer re-configure [Nate]
+ test topology creation [Nate]
+ test churn generation [Nate]
+* TESTING:
+ - consider changing API for peer-group termination to
+ call continuation when done
+* WWW:
+ - Get IPv6 hooked up
+ - change DNS
0.9.0pre1:
* Module features to implement:
+ implement DV transport plugin [Nate & CG]
+ implement testcases [Nate]
+ implement performance tests [Nate]
+* SETUP:
+ - design & implement new setup tool
* GUIs to implement:
- gtk (RC-pre1)
+ how to integrate scheduler with GTK event loop!
+* HOSTLIST:
+ - 'server' uses 'GNUNET_PEERINFO_iterate', should probably switch to notification API
+ (for more instant / up-to-date hostlists at lower cost) [OPTIMIZATION]
0.9.0pre2:
* Module features to implement: