Please note that for many of its dependencies GNUnet requires very
recent versions of the libraries which are often NOT to be found in
-stable distributions in 2010. While using older packages may in some
+stable distributions in 2011. While using older packages may in some
cases on some operating systems may seem to work in some limited
fashion, we are in many cases aware of serious problems with older
packages. Hence please make sure to use the versions listed below.
These are the direct dependencies for running GNUnet:
- libextractor >= 0.6.1
-- libmicrohttpd >= 0.9.2
+- libmicrohttpd >= 0.9.18
- libgcrypt >= 1.2
- libcurl >= 7.21.0
+- libunistring >= 0.9.2
- libltdl >= 2.2 (part of GNU libtool)
-- sqlite >= 3.0 (alternative to MySQL)
+- sqlite >= 3.0 (default database)
- mysql >= 5.1 (alternative to sqLite)
-- postgres >= ??? (not yet supported)
+- postgres >= 8.3 (alternative to sqLite)
Recommended autotools for compiling the SVN version are:
- autoconf >= 2.59
GNUnet requires the GNU MP library (http://www.gnu.org/software/gmp/)
and libgcrypt (http://www.gnupg.org/). You can specify the path to
libgcrypt by passing "--with-gcrypt=PATH" to configure. You will also
-need either sqlite (http://www.sqlite.org/) or MySQL
-(http://www.mysql.org/).
+need either sqlite (http://www.sqlite.org/), MySQL
+(http://www.mysql.org/) or PostGres (http://www.postgres.org/).
If you install from source, you need to install GNU libextractor first
(download from http://www.gnu.org/software/libextractor/). We also
recommend installing GNU libmicrohttpd (download from
http://www.gnu.org/software/libmicrohttpd/). Then you can start the
-actual GNUnet compilation process with:
+actual GNUnet compilation and installation process with:
-$ ./configure --prefix=$HOME --with-extractor=$HOME
+$ export GNUNET_PREFIX=/usr/local # or other directory of your choice
+$ addgroup gnunetdns
+$ adduser gnunet gnunet
+$ ./configure --prefix=$GNUNET_PREFIX --with-extractor=$LE_PREFIX
$ make
# make install
# sudo -u gnunet mkdir ~/.gnunet/
# sudo -u gnunet touch ~/.gnunet/gnunet.conf
# sudo -u gnunet gnunet-arm -s
-This will compile and install GNUnet to $HOME/bin/, $HOME/lib/ and
-$HOME/share/ and start the system with the default configuration. It
-is recommended that you add a user "gnunet" to run "gnunet-arm". You
-can then still run the end-user applications as another user. If you
-create a user "gnunet", it is recommended that you edit the
-configuration file slightly so that data can be stored in
-"/var/lib/gnunet"; you may also want to use "/etc/gnunet.conf" for the
-location of the configuration file in this case.
-
-Note that additional, per-user configuration files
-(~/.gnunet/gnunet.conf) need to be created by each user (for example,
-by running gnunet-setup). For more general information about the GNU
-build process read the INSTALL file.
-
-If you are compiling the code from subversion, you have to run
-". bootstrap" before ./configure. If you receive an error during the
-running of ". bootstrap" that looks like "macro `AM_PATH_GTK' not
+This will create the users and groups needed for running GNUnet
+securely and then compile and install GNUnet to $GNUNET_PREFIX/bin/,
+$GNUNET_PREFIX/lib/ and $GNUNET_PREFIX/share/ and start the system
+with the default configuration. It is strongly recommended that you
+add a user "gnunet" to run "gnunet-arm". You can then still run the
+end-user applications as another user.
+
+If you create a system user "gnunet", it is recommended that you edit
+the configuration file slightly so that data can be stored in the
+system user home directory at "/var/lib/gnunet"; you may also want to
+use "/etc/gnunet.conf" for the location of the configuration file in
+this case.
+
+You can avoid running 'make install' as root if you run configure
+with the "--with-sudo=yes" option and have extensive sudo rights
+(can run "chmod +s" and "chown" via 'sudo'). If you run 'make install'
+as a normal user without sudo rights (or the configure option),
+certain binaries that require additional priviledges will not be
+installed properly (and autonomous NAT traversal, WLAN, DNS/GNS and
+the VPN will then not work).
+
+If you run 'configure' and 'make install' as root or use the SUDO
+option, GNUnet's build system will install "libnss_gns*" libraries to
+"/lib/" regardless (!) of the $GNUNET_PREFIX you might have specified,
+as those libraries must be in "/lib/". If you are packaging GNUnet
+for binary distribution, this may cause your packaging script to miss
+those plugins, so you might need to do some additional manual work to
+include those libraries in your binary package(s). Similarly, if you
+want to use the GNUnet naming system and did NOT run GNUnet's 'make
+install' process with SUDO rights, the libraries will be installed to
+"$GNUNET_PREFIX/lib" and you will have to move them to "/lib/"
+manually.
+
+Finally, if you are compiling the code from subversion, you have to
+run ". bootstrap" before ./configure. If you receive an error during
+the running of ". bootstrap" that looks like "macro `AM_PATH_GTK' not
found in library", you may need to run aclocal by hand with the -I
option, pointing to your aclocal m4 macros, i.e.
Configuration
=============
+Note that additional, per-user configuration files
+(~/.gnunet/gnunet.conf) need to be created by each user (for example,
+by running gnunet-setup). Note that gnunet-setup is a separate
+download and requires recent versions of GTK+ and Glade; you can also
+edit the configuration file by hand, but this is not recommended. For
+more general information about the GNU build process read the INSTALL
+file.
+
GNUnet uses two types of configuration files, one that specifies the
-system-wide defaults (typically located in /usr/share/gnunet/defaults
-.conf) and a second one that overrides default values with
-user-specific preferences. The user-specific configuration file
-should be located in "~/.gnunet/gnunet.conf" or its location can be
-specified by giving the "-c" option to the respective GNUnet
-application.
+system-wide defaults (typically located in
+$GNUNET_PREFIX/share/gnunet/config.d/) and a second one that overrides
+default values with user-specific preferences. The user-specific
+configuration file should be located in "~/.gnunet/gnunet.conf" or its
+location can be specified by giving the "-c" option to the respective
+GNUnet application.
The defaults that are shipped with the installation are usually ok,
you may want to adjust the limitations (space consumption, bandwidth,
etc.) though. The configuration files are human-readable. Note that
you MUST create "~/.gnunet/gnunet.conf" explicitly before starting
-GNUnet. You can either copy "defaults.conf" or simply create an empty
-file.
+GNUnet. You can either run gnunet-setup (available as part of the
+gnunet-gtk source package) or simply create an empty file.
Usage
specified in the gnunet.conf configuration file).
Now start the local node using "gnunet-arm -s". GNUnet should run 24/7 if
-you want to maximize your anonymity.
-
-The GTK user interface is shipped separately. After downloading and
-installing gnunet-gtk, you can invoke the GUI with:
-
-$ gnunet-gtk
-
-// FIXME: gnunet-qt is not yet supported in 0.9.x
-For Qt/KDE users, there is also a QT user interface (also shipped
-separately). If you install gnunet-qt, you can invoke the GUI with:
+you want to maximize your anonymity.
-$ gnunet-qt
-
-If you want to use the shell (part of this distribution), use
+You should then be able to access GNUnet using the shell:
$ gnunet-search KEYWORD
together with a description. To publish files on GNUnet, use the
"gnunet-publish" command.
-// FIXME: auto-share is not yet supported in 0.9.x
-In order to share files, the easiest way is to create a directory
-with the files (and directories) that you want to share and run
-$ nohup gnunet-auto-share NAME-OF-THE-DIRECTORY &
+The GTK user interface is shipped separately. After downloading and
+installing gnunet-gtk, you can invoke the setup tool and the
+file-sharing GUI with:
+
+$ gnunet-setup
+$ gnunet-fs-gtk
For further documentation, see our webpage.
$ export GNUNET_PREFIX=$SOMEWHERE
$ make check
-If any testcases fail to pass on your system, run "contrib/report.sh"
-and report the output together with information about the failing
-testcase to the Mantis bugtracking system at
-https://gnunet.org/bugs/.
+Some of the testcases require python >= 2.6 and pexpect to be
+installed. If any testcases fail to pass on your system, run
+"contrib/report.sh" and report the output together with
+information about the failing testcase to the Mantis bugtracking
+system at https://gnunet.org/bugs/.
Running http on port 80 and https on port 443
In order to hide GNUnet's HTTP/HTTPS traffic perfectly, you might
consider running GNUnet's HTTP/HTTPS transport on port 80/443.
However, we do not recommend running GNUnet as root. Instead, forward
-port 80 to say 8080 with this command (as root, in your startup
+port 80 to say 1080 with this command (as root, in your startup
scripts):
-# iptables -t nat -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 8080
+# iptables -t nat -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 1080
or for HTTPS
# iptables -t nat -A PREROUTING -p tcp -m tcp --dport 443 -j REDIRECT --to-ports 4433
-Then set in the HTTP section of gnunet.conf the "ADVERTISED-PORT" to
-"80" and "PORT" to 8080 and similarly in the HTTPS section the
-"ADVERTISED-PORT" to "443" and "PORT" to 4433.
+Then set in the HTTP section of gnunet.conf the "ADVERTISED_PORT" to
+"80" and "PORT" to 1080 and similarly in the HTTPS section the
+"ADVERTISED_PORT" to "443" and "PORT" to 4433.
You can do the same trick for the TCP and UDP transports if you want
to map them to a priviledged port (from the point of view of the
at this point.
-
-Running the SMTP transport
-==========================
-
-// NOTE: SMTP is not currently available in this version of GNUnet
-Running GNUnet over SMTP (e-mail) is a bit more involved. Note that
-you do not need to run all transports (only running the NAT transport
-is the only thing that will not work). If you really want to do
-P2P over SMTP, read the instructions at http://gnunet.org/smtp
-
-
Stay tuned
==========