2 BINARY = gnunet-daemon-exit
4 # IPv6 address for the TUN interface (must be changed as this
5 # must be within the global IPv6 range of your system!)
8 # Prefix for our IPv6 subnet on the TUN interface.
11 # IPv4 address to use on our TUN interface (may need to be
12 # changed to avoid conflicts with existing addresses on your system).
13 # Use RFC 3927-style link-local address
14 IPV4ADDR = 169.254.86.1
16 # Netmask for the IPv4 subnet on the TUN interface.
17 IPV4MASK = 255.255.255.0
19 # IPv4 networks to which we are allowed to exit.
20 # The format is "(network[/netmask][:[!]SPORT-DPORT];)*"
21 EXIT_RANGE_IPV4_POLICY = 0.0.0.0/0:!25;
23 # IPv6 networks to which we are allowed to exit.
24 # The format is "(network[/netmask][:[!]SPORT-DPORT];)*"
25 EXIT_RANGE_IPV6_POLICY = ::/0:!25;
27 # Not a service, tell ARM no binding!
30 # Name of the (virtual) tunnel interface the exit daemon will manage
31 TUN_IFNAME = exit-gnunet
33 # Name of the "real" interface that IPv4 traffic from this system will
34 # leave from; this is the name of the interface where we need to
35 # enable NAT on postrouting (typically something like 'eth0' or 'eth1'
36 # or 'wlan0'). Not needed if EXIT_IPv4 is disabled AND if all
37 # offered services run on 'localhost'. In this case, the value
38 # of the option can instead be set to "%" (to not enable NAT on any
42 # Set this to YES to allow exiting this system via IPv4 to the Internet
45 # Set this to YES to allow exiting this system via IPv6 to the Internet
48 # This option should be set to YES to allow the DNS service to
49 # perform lookups against the locally configured DNS resolver.
50 # (set to "NO" if no normal ISP is locally available and thus
51 # requests for normal ".com"/".org"/etc. must be routed via
52 # the GNUnet VPN (the GNUNET PT daemon then needs to be configured
53 # to intercept and route DNS queries via cadet).
54 # Set this to YES to allow using this system for DNS queries.
57 # Set this to an IPv4 or IPv6 address of a DNS resolver to use for DNS queries
58 DNS_RESOLVER = 8.8.8.8
60 # For IPv4-services offered by this peer, we need to at least enable IPv4
63 # For IPv6-services offered by this peer, we need to at least enable IPv6
67 # Maximum number of concurrent connections this exit supports.