oweals/u-boot.git
2020-01-16 Tom RiniMerge tag 'xilinx-for-v2020.04' of https://gitlab.denx...
2020-01-16 Tom RiniMerge branch '2020-01-15-master-imports'
2020-01-16 Sam Shihconfigs: mediatek: fix mt7623n bpir2 defconfig
2020-01-16 Sam Shiharm: dts: mediatek: move u-boot properties to -u-boot...
2020-01-16 Sam ShihAdd support for MT7622 reference board
2020-01-16 Sam Shihmmc: add mmc and sd support for MT7622
2020-01-16 Sam Shihpower: domain: add power domain support for MT7622
2020-01-16 Sam Shihclk: mediatek: fix clock-rate overflow problem
2020-01-16 Sam Shihclk: mediatek: add driver for MT7622
2020-01-16 Sam Shihpinctrl: mediatek: add support for different pinctrl
2020-01-16 Sam Shihpinctrl: mediatek: add driver for MT7622
2020-01-16 Sam ShihARM: MediaTek: Add support for MediaTek MT7622 SoC
2020-01-16 Chunfeng Yunphy: phy-mtk-tphy: make ref clock optional
2020-01-16 Chunfeng Yunphy: phy-mtk-tphy: remove the check of -ENOSYS
2020-01-16 Chunfeng Yunclk: fixed_rate: add dummy enable() function
2020-01-16 Chunfeng Yunclk: add APIs to get (optional) clock by name without...
2020-01-16 Chunfeng Yunclk: check valid clock by clk_valid()
2020-01-16 Chunfeng Yunclk: fix error check for devm_clk_get_optional()
2020-01-16 Chunfeng Yunclk: mediatek: mt7629: add support for ssusbsys
2020-01-16 mingming leeARM: MediaTek: add basic support for MT8512 boards
2020-01-16 mingming leemmc: mtk-sd: fix hang when data read quickly
2020-01-16 mingming leemmc: mtk-sd: add support for MediaTek MT8512/MT8110...
2020-01-16 mingming leepinctrl: mediatek: add driver for MT8512
2020-01-16 mingming leeclk: mediatek: add configurable pcw_chg_reg/ibits/fmin...
2020-01-16 mingming leeclk: mediatek: add set_clr_upd mux type flow
2020-01-16 mingming leeclk: mediatek: add driver support for MT8512
2020-01-16 mingming leeARM: MediaTek: Add support for MediaTek MT8512 SoC
2020-01-16 Sam ProtsenkoMAINTAINERS: Fix mail
2020-01-16 Alexandre Besnardcmd/blk_common: clarify no partition error message
2020-01-16 Heinrich Schuchardttest/py: use valid device tree in test_fit.py
2020-01-16 Sean AndersonAdd dependencies for MALLOC_F and OF_LIBFDT
2020-01-16 Sean AndersonInclude missing headers for asm-generic/sections.h
2020-01-16 Vignesh Raghavendradma: Add stub of dma_memcpy and dma_get_device
2020-01-16 Vignesh RaghavendraKconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA
2020-01-15 Tom RiniMerge tag 'efi-2020-04-rc1-2' of https://gitlab.denx...
2020-01-15 Tom RiniMerge tag 'u-boot-imx-20200115' of https://gitlab.denx...
2020-01-15 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-tegra
2020-01-14 Heinrich Schuchardtefi_loader: imply VIDEO_ANSI
2020-01-14 Heinrich Schuchardtefi_driver: debug output efi_uc_start, efi_uc_stop
2020-01-14 Heinrich Schuchardtefi_driver: fix efi_uc_stop()
2020-01-14 Heinrich Schuchardtefi_selftest: enable CONFIG_CMD_POWEROFF
2020-01-14 Heinrich Schuchardtefi_loader: describe returning of control
2020-01-14 Heinrich Schuchardtefi_loader: document functions in efi_rng.c
2020-01-14 Giulio Benettiimx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVK
2020-01-14 Giulio Benettiimx: Add basic support for the NXP IMXRT10xx SoC family
2020-01-14 Giulio Benettimmc: fsl_esdhc: add compatible for fsl, imxrt-usdhc
2020-01-14 Giulio Benettimmc: fsl_esdhc: make if(CONFIG_IS_ENABLED(CLK)) an...
2020-01-14 Giulio Benettiram: add SDRAM driver for i.MXRT SoCs
2020-01-14 Giulio Benettiserial_lpuart: add support for i.MXRT
2020-01-14 Giulio Benettiserial_lpuart: add clock enable if CONFIG_CLK is defined
2020-01-14 Giulio BenettiARM: dts: imxrt1050: add dtsi file
2020-01-14 Giulio Benettigpio: mxc_gpio: add support for i.MXRT1050
2020-01-14 Giulio Benettipinctrl: add i.MXRT driver
2020-01-14 Giulio Benetticlk: imx: add i.IMXRT1050 clk driver
2020-01-14 Giulio Benetticlk: imx: pfd: add set_rate()
2020-01-14 Giulio Benetticlk: imx: pllv3: add support for PLLV3_AV type
2020-01-14 Giulio Benetticlk: imx: pllv3: add PLLV3_SYS support
2020-01-14 Giulio Benetticlk: imx: pllv3: add set_rate() support
2020-01-14 Giulio Benetticlk: imx: pllv3: add disable() support
2020-01-14 Giulio Benetticlk: imx: pllv3: add enable() support
2020-01-14 Giulio Benetticlk: imx: pllv3: set div_mask differently if PLLV3...
2020-01-14 Giulio Benetticlk: imx: pllv3: register PLLV3 GENERIC and USB as...
2020-01-14 Giulio Benettiarmv7m: cache: add mmu_set_region_dcache_behaviour...
2020-01-14 Giulio Benettispl: fix entry_point equal to load_addr
2020-01-14 Anatolij Gustschinimx: dts: imx8dx: add I2C IPG clock for bus 0 and 2
2020-01-14 Anatolij Gustschinclk: imx8qxp: extend to support getting I2C IPG clock
2020-01-14 Fabio EstevamARM: dts: imx6ul-14x14-evk: Pass the "broken-cd" property
2020-01-14 Fabio Estevammmc: fsl_esdhc_imx: Handle the "broken-cd" property
2020-01-14 Joris Offougapico-imx7d: Convert to DM_ETH
2020-01-14 Joris Offougapico-imx7d: Disable USB_ETHER support for bl33 defconfig
2020-01-14 Fabio Estevammx6ul_14x14_evk: Fix SPL boot hang
2020-01-14 Peng Fanimx: imx8qxp_mek: update README
2020-01-14 Fabio Estevamwandboard: Do not print error message when PMIC is...
2020-01-14 Fabio Estevamimx8qxp_mek: Select CONFIG_NET_RANDOM_ETHADDR
2020-01-14 Anatolij Gustschinimx: add imx8x based deneb board
2020-01-14 Anatolij Gustschinimx: add imx8x capricorn giedi board
2020-01-14 Stephen Warrentegra: fdt: Add tegra186-u-boot.dtsi
2020-01-14 Michal Simekarm64: versal: Enable board_late_init calling
2020-01-14 Zumeng ChenARM: dts: zynq: enablement of coresight topology
2020-01-14 Michal Simekarm64: zynqmp: Sync gem clock nodes with mainline Linux
2020-01-14 Michal Simekarm64: zynqmp: Sync gpio-controller name location
2020-01-14 Sudeep Hollaarm64: dts: zynqmp: replace gpio-key,wakeup with wakeup...
2020-01-14 Jan Kiszkaarm64: dts: zcu100-revC: Give wifi some time after...
2020-01-14 Michal Simekarm64: dts: zynqmp: Fix node names which contain "_"
2020-01-14 Rob Herringarm64: dts: Remove inconsistent use of 'arm,armv8'...
2020-01-14 Michal Simekarm64: zynqmp: Remove incorrect phy from DT for zcu102...
2020-01-14 Michal Simekarm64: zynqmp: Add support for zcu1285 revA board
2020-01-14 Michal Simeknet: zynq: Add a note about RX_BUF macro
2020-01-14 Michal Simekarm64: zynqmp: Switch zcu100 revC to use firmware clock...
2020-01-14 T Karthik Reddyzynqmp: dts: Cleanup no-1-8-v property from sdhci dt...
2020-01-14 Michal Simekarm64: zynqmp: Add support for zcu208
2020-01-14 Michal SimekARM: zynq: Add missing nand/smcc nodes
2020-01-14 Ashok Reddy... firmware: Remove probe which is causing extra bind
2020-01-14 Raviteja Narayanamarm64: zynqmp: Correct the type of eeprom for zcu216...
2020-01-14 Michal Simekarm64: zynqmp: Fix ina226 shunt resistor value
2020-01-14 Michal Simekarm64: zynqmp: Move PANIC to Kconfig
2020-01-14 Michal Simekarm64: zynqmp: Use zynqmp_virt platform
2020-01-14 Michal Simekarm64: zynqmp: Add missing Kconfig options to zynqmp_vi...
2020-01-14 Michal Simekarm64: zynqmp: Add support for u-boot.itb generation...
2020-01-14 Michal Simektest/py: hush_if_test: Add tests to cover octal/hex...
next