arm: k3: Use driver_name to get ti_sci handle
[oweals/u-boot.git] / include /
2019-10-11 Andrew F. Davisconfigs: ti: Use addr_fit for run_fit environment variable
2019-10-11 Moses Christopheram335x, guardian: adapt guardian board to DM
2019-10-11 Suman Annaenv: ti: am65x_evm: Add env support to boot the MCU...
2019-10-11 Suman Annaenv: ti: j721e-evm: Add support to boot rprocs includin...
2019-10-11 Suman Annaenv: ti: k3_rproc: Add common rproc environment variables
2019-10-11 Lokesh Vutlaremoteproc: elf_loader: Introduce rproc_elf_get_boot_ad...
2019-10-11 Lokesh Vutlaremoteproc: elf_loader: Introduce a common elf loader...
2019-10-11 Lokesh Vutlaremoteproc: elf-loader: Add 64 bit elf loading support
2019-10-11 Lokesh Vutlaremoteproc: elf_loader: Always check the validity of...
2019-10-11 Lokesh Vutlaremoteproc: ops: Add elf section size as input paramete...
2019-10-11 Lokesh Vutladm: core: Add a function to count the children of a...
2019-10-11 Andreas Dannenbergspl: ymodem: Make SPL Y-Modem loader framework accessible
2019-10-09 Tom RiniMerge tag 'xilinx-for-v2020.01' of https://gitlab.denx...
2019-10-09 Tom RiniMerge tag 'u-boot-imx-20191009' of https://gitlab.denx...
2019-10-08 Tom RiniMerge https://gitlab.denx.de/u-boot/custodians/u-boot...
2019-10-08 Tom RiniMerge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
2019-10-08 Tom RiniMerge tag 'u-boot-atmel-2020.01-a' of https://gitlab...
2019-10-08 Tom RiniMerge tag 'efi-2020-01-rc1' of https://gitlab.denx...
2019-10-08 Joris Offougapico-imx7d: fix splash logo drawing
2019-10-08 Igor Opaniukapalis_imx6: use distroboot by default
2019-10-08 Igor Opaniukcolibri_imx6/imx7/imx8x: use distroboot by default
2019-10-08 Peng Fanimx: Add i.MX8MM EVK board support.
2019-10-08 Peng Fanimx: imx8mm: add clock bindings header
2019-10-08 Anatolij Gustschinimx: mx6ul_14x14_evk: fix link issue
2019-10-08 Patrick Wildtimx: add support for i.MX7/i.MX8MQ reset controller
2019-10-08 Patrick Wildtimx: add support for i.MX8MQ power domain controller
2019-10-08 Anatolij Gustschinimx: wandboard: convert FEC support to DM_ETH
2019-10-08 Lukasz MajewskiDM: WDT: Convert WDT driver to use DM/DTS (including...
2019-10-08 Lukasz MajewskiDM: SPI: Convert display5 to use SPI with DM/DTS (but...
2019-10-08 Lukasz MajewskiDM: eth: Switch display5 board to use DM_ETH
2019-10-08 Lukasz MajewskiDM: I2C: Switch display5 board to use DM_I2C
2019-10-08 Fabio Estevampico-imx6: Add Falcon mode
2019-10-08 Fabio Estevampico-imx6: Add splashscreen support
2019-10-08 Fabio Estevampico-imx6: Add Ethernet support
2019-10-08 Otavio Salvadorpico-imx6: Fix bootmenu handling
2019-10-08 Fabio Estevampico-imx6: Add initial support
2019-10-08 Fabio Estevammx53loco: Fix U-Boot corruption after saving the enviro...
2019-10-08 Joris Offougaconfigs: pico-imx7d: Convert to DM_VIDEO
2019-10-08 Otavio Salvadorpico-imx7d: Add NYMPH baseboard support
2019-10-08 Otavio Salvadorpico-imx7d: Add DWARF baseboard support
2019-10-08 Fabio Estevampico-imx6ul: Add LCD support
2019-10-08 Fabio Estevampico-imx6ul: Increase the CONFIG_ENV_OFFSET size
2019-10-08 Otavio Salvadorpico-imx6ul: Add DWARF baseboard support
2019-10-08 Peng Fanimx8qm: correct fdt_file
2019-10-08 Peng Fanspl: mmc: support loading i.MX container format file
2019-10-08 Peng Fanimx: imx8qxp_mek: fix CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_...
2019-10-08 Breno Matheus Limaimx: configs: Cleanup CONFIG_SECURE_BOOT comments
2019-10-08 Breno Matheus LimaKconfig: Migrate CONFIG_CSF_SIZE to Kconfig
2019-10-08 Robert HancockARM: imx: Support larger SPL size on IMX6DQ
2019-10-08 Peng Fanspl: pass args to board_return_to_bootrom
2019-10-08 Peng Fanimx: mx6ul_14x14_evk: convert to DM_VIDEO
2019-10-08 Peng Fanimx: add i.MX6ULZ board
2019-10-08 Peng Fanarm: dts: sync dts for i.MX6UL
2019-10-08 Michal Simekarm64: zynqmp: Use mailbox driver for PMUFW config...
2019-10-08 Michal Simekfirmware: zynqmp: Separate function for sending message...
2019-10-08 Ibai Erkiagafirmware: zynqmp: create firmware header
2019-10-08 Michal Simekmicroblaze: Setup reasonable maximum bootm len
2019-10-08 Michal Simekmicroblaze: Enable cache by default
2019-10-08 Michal Simekmicroblaze: Move CONFIG_LMB from board file to config.h
2019-10-08 Michal Simekconfigs: apalis-tk1: Do not define CONFIG_SYS_BOOT_RAMD...
2019-10-08 Siva Durga Prasad... net: phy: Add gmiitorgmii converter support
2019-10-08 Michal SimekARM: zynq: Remove all Xilinx private commands
2019-10-08 Michal SimekARM: zynq: Use {} around variables for qspi and nand...
2019-10-08 Michal SimekARM: zynq: Fix NOR boot mode
2019-10-08 Michal SimekARM: zynq: Enable USB1 as secondary boot device
2019-10-08 Michal SimekARM: zynq: Specify MMC controller number for boot sequence
2019-10-08 Ashok Reddy Somaarm64: versal: Fix for OCM overwriting issue
2019-10-08 Michal SimekARM: zynq: Increase input buffer console size to 2k
2019-10-08 Siva Durga Prasad... ARM: zynq: Increase init ram size by 4K
2019-10-08 Michal SimekARM: zynq: Do not enable NETBSD support by default
2019-10-08 Siva Durga Prasad... arm64: zynqmp: Add new jtag distro boot command
2019-10-08 Siva Durga Prasad... arm64: zynqmp: Update scriptaddr value to 512MB
2019-10-08 T Karthik Reddyarm64: versal: Change boot script offset address in...
2019-10-08 T Karthik Reddyarm64: versal: Add new dfu usb distro boot command
2019-10-08 Siva Durga Prasad... arm64: versal: Add new jtag distro boot command
2019-10-08 Siva Durga Prasad... arm64: versal: Define configs related to USB DFU functi...
2019-10-08 T Karthik Reddyarm64: zynqmp: Set initrd_high to as high as possible
2019-10-08 Siva Durga Prasad... arm64: versal: Set initrd_high to as high as possible
2019-10-08 Siva Durga Prasad... arm64: versal: fpga: Add PL bit stream load support
2019-10-08 Tudor Ambarusconfigs: sam9x60ek: Add QSPI_BOOT defines
2019-10-08 Tudor Ambarusboard: sam9x60ek: Add NAND flash support
2019-10-08 Sandeep Sheriker... board: atmel: Add sam9x60ek board
2019-10-08 Eugen Hristevboard: atmel: sama5d27_wlsom1_ek: fix SPL OFFS on SPI
2019-10-08 Eugen Hristevboard: atmel: sama5d2_wlsom1_ek: add qspi support and...
2019-10-08 Eugen Hristevboard: atmel: sama5d2_wlsom1_ek: add SPL support
2019-10-08 Nicolas Ferreboard: atmel: add sama5d27_wlsom1_ek board
2019-10-08 Simon Glassdm: core: Drop fdtdec_get_pci_addr()
2019-10-08 Simon Glassx86: Move acpi_s3.h to a common location
2019-10-08 Simon Glassspl: Allow distinguishing between two phases in U-Boot
2019-10-08 Simon Glassarm: mxs: Correct CONFIG_SPL_NO_CPU_SUPPORT option
2019-10-08 Simon Glasscros_ec: Add MEC_EMI_BASE and size to the header file
2019-10-08 Simon Glasslog: Add log_nop() to avoid unused-variable warnings
2019-10-08 Simon Glassserial: ns16550: Add a PCI device/function field
2019-10-08 Simon Glassdm: pci: Add a function to read a PCI BAR
2019-10-08 Simon Glasspci: Correct 'specifified' and 'Plese' typos
2019-10-08 Simon Glasspci: sandbox: Move the emulators into their own node
2019-10-08 Simon Glasssandbox: pci: Move pci_offset_to_barnum() to pci.h
2019-10-08 Simon Glasssandbox: pci: Drop the get_devfn() method
2019-10-08 Simon Glassdm: core: Add device_foreach_child()
2019-10-08 Simon Glassdm: core: Correct the return value for uclass_find_firs...
next