B4860QDS: SGMII related updates
authorShaveta Leekha <shaveta@freescale.com>
Wed, 12 Nov 2014 10:30:22 +0000 (16:00 +0530)
committerYork Sun <yorksun@freescale.com>
Fri, 5 Dec 2014 16:06:12 +0000 (08:06 -0800)
- Enable SGMII support for 0x8d Serdes 2 protocol.
    - Correct Phy address for DTSECx for 0x8d/0xb2 Serdes 2 protocol.
    - Updated debug statement
    - Add Alternate LC VCO protocols(0x8d-->0x8c, 0xb2-->0xb1)
    - Rename onboard PHY address defines for more readability
    - Add these new Defines in B4860QDS.h file

Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
board/freescale/b4860qds/eth_b4860qds.c
include/configs/B4860QDS.h

index 12df9a8d9f9fb4e10aab67cf8fe5e5a68ec824ce..2726cd2d473adafa5fe96bdb11579b1f63bf1633 100644 (file)
@@ -112,7 +112,10 @@ static void initialize_lane_to_slot(void)
                 * Lanes: A,B,C,D: PCI
                 * Lanes: E,F,G,H: XAUI2
                 */
+       case 0xb1:
        case 0xb2:
+       case 0x8c:
+       case 0x8d:
                /*
                 * Configuration:
                 * SERDES: 2
@@ -195,34 +198,34 @@ int board_eth_init(bd_t *bis)
         * all SGMII. RGMII is not supported on this board. Setting SGMII 5 and
         * 6 to on board SGMII phys
         */
-       fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
-       fm_info_set_phy_address(FM1_DTSEC6, CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+       fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR);
+       fm_info_set_phy_address(FM1_DTSEC6, CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
 
        switch (serdes1_prtcl) {
        case 0x29:
        case 0x2a:
                /* Serdes 1: A-B SGMII, Configuring DTSEC 5 and 6 */
-               debug("Setting phy addresses for FM1_DTSEC5: %x and"
-                       "FM1_DTSEC6: %x\n", CONFIG_SYS_FM1_DTSEC5_PHY_ADDR,
-                       CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+               debug("Set phy addresses for FM1_DTSEC5:%x, FM1_DTSEC6:%x\n",
+                     CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR,
+                     CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
                fm_info_set_phy_address(FM1_DTSEC5,
-                               CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
+                               CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR);
                fm_info_set_phy_address(FM1_DTSEC6,
-                               CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+                               CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
                break;
 #ifdef CONFIG_PPC_B4420
        case 0x17:
        case 0x18:
                /* Serdes 1: A-D SGMII, Configuring on board dual SGMII Phy */
-               debug("Setting phy addresses for FM1_DTSEC3: %x and"
-                       "FM1_DTSEC4: %x\n", CONFIG_SYS_FM1_DTSEC5_PHY_ADDR,
-                       CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+               debug("Set phy addresses for FM1_DTSEC3:%x, FM1_DTSEC4:%x\n",
+                     CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR,
+                     CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
                /* Fixing Serdes clock by programming FPGA register */
                QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125);
                fm_info_set_phy_address(FM1_DTSEC3,
-                               CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
+                               CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR);
                fm_info_set_phy_address(FM1_DTSEC4,
-                               CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+                               CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
                break;
 #endif
        default:
@@ -233,8 +236,8 @@ int board_eth_init(bd_t *bis)
        switch (serdes2_prtcl) {
        case 0x17:
        case 0x18:
-               debug("Setting phy addresses on SGMII Riser card for"
-                               "FM1_DTSEC ports: \n");
+               debug("Set phy address on SGMII Riser for FM1_DTSEC1:%x\n",
+                     CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
                fm_info_set_phy_address(FM1_DTSEC1,
                                CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
                fm_info_set_phy_address(FM1_DTSEC2,
@@ -246,8 +249,8 @@ int board_eth_init(bd_t *bis)
                break;
        case 0x48:
        case 0x49:
-               debug("Setting phy addresses on SGMII Riser card for"
-                               "FM1_DTSEC ports: \n");
+               debug("Set phy address on SGMII Riser for FM1_DTSEC1:%x\n",
+                     CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
                fm_info_set_phy_address(FM1_DTSEC1,
                                CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
                fm_info_set_phy_address(FM1_DTSEC2,
@@ -255,10 +258,12 @@ int board_eth_init(bd_t *bis)
                fm_info_set_phy_address(FM1_DTSEC3,
                                CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR);
                break;
-       case 0x8d:
+       case 0xb1:
        case 0xb2:
-               debug("Setting phy addresses on SGMII Riser card for"
-                               "FM1_DTSEC ports: \n");
+       case 0x8c:
+       case 0x8d:
+               debug("Set phy addresses on SGMII Riser for FM1_DTSEC1:%x\n",
+                     CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
                fm_info_set_phy_address(FM1_DTSEC3,
                                CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
                fm_info_set_phy_address(FM1_DTSEC4,
@@ -266,18 +271,18 @@ int board_eth_init(bd_t *bis)
                break;
        case 0x98:
                /* XAUI in Slot1 and Slot2 */
-               debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC1: %x\n",
+               debug("Set phy address of AMC2PEX-2S for FM1_10GEC1:%x\n",
                      CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
                fm_info_set_phy_address(FM1_10GEC1,
                                        CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
-               debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n",
+               debug("Set phy address of AMC2PEX-2S for FM1_10GEC2:%x\n",
                      CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
                fm_info_set_phy_address(FM1_10GEC2,
                                        CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
                break;
        case 0x9E:
                /* XAUI in Slot2 */
-               debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n",
+               debug("Sett phy address of AMC2PEX-2S for FM1_10GEC2:%x\n",
                      CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
                fm_info_set_phy_address(FM1_10GEC2,
                                        CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
@@ -329,17 +334,20 @@ int board_eth_init(bd_t *bis)
                switch (fm_info_get_enet_if(i)) {
                case PHY_INTERFACE_MODE_XGMII:
                        fm_info_set_mdio(i,
-                                        miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME));
+                                        miiphy_get_dev_by_name
+                                        (DEFAULT_FM_TGEC_MDIO_NAME));
+                       break;
+               case PHY_INTERFACE_MODE_NONE:
+                       fm_info_set_phy_address(i, 0);
                        break;
                default:
-                       printf("Fman1: 10GSEC%u set to unknown interface %i\n",
+                       printf("Fman1: TGEC%u set to unknown interface %i\n",
                               idx + 1, fm_info_get_enet_if(i));
                        fm_info_set_phy_address(i, 0);
                        break;
                }
        }
 
-
        cpu_eth_init(bis);
 #endif
 
@@ -357,15 +365,19 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 
                sprintf(alias, "phy_sgmii_%x", phy);
                fdt_set_phy_handle(fdt, compat, addr, alias);
+               fdt_status_okay_by_alias(fdt, alias);
        }
 }
 
+/*
+ * Set status to disabled for unused ethernet node
+ */
 void fdt_fixup_board_enet(void *fdt)
 {
        int i;
        char alias[32];
 
-       for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+       for (i = FM1_DTSEC1; i <= FM1_10GEC2; i++) {
                switch (fm_info_get_enet_if(i)) {
                case PHY_INTERFACE_MODE_NONE:
                        sprintf(alias, "ethernet%u", i);
index dc1a9bc1ef98d9bc2d78ea88a550f17054b4110a..b47b9decaacafa64bf470423cdfa359aa2c417cc 100644 (file)
@@ -713,8 +713,8 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_FMAN_ENET
-#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10
-#define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11
+#define CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR 0x10
+#define CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR 0x11
 
 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */
 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7      /*SLOT 1*/