ddr: altera: sequencer: Zap unused params and macros
authorMarek Vasut <marex@denx.de>
Sun, 2 Aug 2015 16:27:21 +0000 (18:27 +0200)
committerMarek Vasut <marex@denx.de>
Sat, 8 Aug 2015 12:14:28 +0000 (14:14 +0200)
These parameters are not used in the code, zap them and the
macros which are used by them as well.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
drivers/ddr/altera/sequencer.c
drivers/ddr/altera/sequencer.h

index bc2e4571fb305a62020fba060017687a009bfcb5..06a3bf6e9b2e7dff164bad2d8727f58e9dcf6836 100644 (file)
@@ -83,7 +83,6 @@ uint16_t skip_delay_mask;     /* mask off bits when skipping/not-skipping */
 
 struct gbl_type *gbl;
 struct param_type *param;
-uint32_t curr_shadow_reg;
 
 static void set_failing_group_stage(uint32_t group, uint32_t stage,
        uint32_t substage)
@@ -151,9 +150,6 @@ static void phy_mgr_initialize(void)
        param->write_correct_mask_vg = (1 << ratio) - 1;
        param->read_correct_mask = (1 << RW_MGR_MEM_DQ_PER_READ_DQS) - 1;
        param->write_correct_mask = (1 << RW_MGR_MEM_DQ_PER_WRITE_DQS) - 1;
-       ratio = RW_MGR_MEM_DATA_WIDTH /
-               RW_MGR_MEM_DATA_MASK_WIDTH;
-       param->dm_correct_mask = (1 << ratio) - 1;
 }
 
 /**
@@ -885,11 +881,6 @@ static void rw_mgr_mem_load_user(const u32 fin1, const u32 fin2,
        u32 r;
 
        for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS; r++) {
-               if (param->skip_ranks[r]) {
-                       /* request to skip the rank */
-                       continue;
-               }
-
                /* set rank */
                set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_OFF);
 
@@ -1192,10 +1183,6 @@ rw_mgr_mem_calibrate_write_test(const u32 rank_bgn, const u32 write_group,
        *bit_chk = param->write_correct_mask;
 
        for (r = rank_bgn; r < rank_end; r++) {
-               /* Request to skip the rank */
-               if (param->skip_ranks[r])
-                       continue;
-
                /* Set rank */
                set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_READ_WRITE);
 
@@ -1266,10 +1253,6 @@ rw_mgr_mem_calibrate_read_test_patterns(const u32 rank_bgn, const u32 group,
        bit_chk = param->read_correct_mask;
 
        for (r = rank_bgn; r < rank_end; r++) {
-               /* Request to skip the rank */
-               if (param->skip_ranks[r])
-                       continue;
-
                /* Set rank */
                set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_READ_WRITE);
 
@@ -1333,10 +1316,6 @@ static void rw_mgr_mem_calibrate_read_load_patterns(const u32 rank_bgn,
        debug("%s:%d\n", __func__, __LINE__);
 
        for (r = rank_bgn; r < rank_end; r++) {
-               if (param->skip_ranks[r])
-                       /* request to skip the rank */
-                       continue;
-
                /* set rank */
                set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_READ_WRITE);
 
@@ -1403,10 +1382,6 @@ rw_mgr_mem_calibrate_read_test(const u32 rank_bgn, const u32 group,
        *bit_chk = param->read_correct_mask;
 
        for (r = rank_bgn; r < rank_end; r++) {
-               if (param->skip_ranks[r])
-                       /* request to skip the rank */
-                       continue;
-
                /* set rank */
                set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_READ_WRITE);
 
@@ -2662,10 +2637,6 @@ rw_mgr_mem_calibrate_dq_dqs_centering(const u32 rw_group, const u32 test_bgn,
        for (rank_bgn = 0, sr = 0;
             rank_bgn < RW_MGR_MEM_NUMBER_OF_RANKS;
             rank_bgn += NUM_RANKS_PER_SHADOW_REG, sr++) {
-               /* Check if this set of ranks should be skipped entirely. */
-               if (param->skip_shadow_regs[sr])
-                       continue;
-
                ret = rw_mgr_mem_calibrate_vfifo_center(rank_bgn, rw_group,
                                                        test_bgn,
                                                        use_read_test,
@@ -3159,10 +3130,6 @@ static void mem_precharge_and_activate(void)
        int r;
 
        for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS; r++) {
-               /* Test if the rank should be skipped. */
-               if (param->skip_ranks[r])
-                       continue;
-
                /* Set rank. */
                set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_OFF);
 
@@ -3380,7 +3347,7 @@ static uint32_t mem_calibrate(void)
                 */
                scc_mgr_zero_all();
 
-               run_groups = ~param->skip_groups;
+               run_groups = ~0;
 
                for (write_group = 0, write_test_bgn = 0; write_group
                        < RW_MGR_MEM_IF_WRITE_DQS_WIDTH; write_group++,
@@ -3432,13 +3399,6 @@ static uint32_t mem_calibrate(void)
                                if (STATIC_CALIB_STEPS & CALIB_SKIP_DELAY_SWEEPS)
                                        continue;
 
-                               /*
-                                * Determine if this set of ranks
-                                * should be skipped entirely.
-                                */
-                               if (param->skip_shadow_regs[sr])
-                                       continue;
-
                                /* Calibrate WRITEs */
                                if (!rw_mgr_mem_calibrate_writes(rank_bgn,
                                                write_group, write_test_bgn))
@@ -3489,13 +3449,6 @@ grp_failed:              /* A group failed, increment the counter. */
                if (STATIC_CALIB_STEPS & CALIB_SKIP_LFIFO)
                        continue;
 
-               /*
-                * If we're skipping groups as part of debug,
-                * don't calibrate LFIFO.
-                */
-               if (param->skip_groups != 0)
-                       continue;
-
                /* Calibrate the LFIFO */
                if (!rw_mgr_mem_calibrate_lfifo())
                        return 0;
index 3e4152f69f8a033310e5668fd39769a47af804f6..3ecd7333e918d1b816486f15a5e343c4fb437301 100644 (file)
 #define CAL_SUBSTAGE_READ_LATENCY      1
 #define CAL_SUBSTAGE_REFRESH           1
 
-#define MAX_RANKS                      (RW_MGR_MEM_NUMBER_OF_RANKS)
-#define MAX_DQS                                (RW_MGR_MEM_IF_WRITE_DQS_WIDTH > \
-                                       RW_MGR_MEM_IF_READ_DQS_WIDTH ? \
-                                       RW_MGR_MEM_IF_WRITE_DQS_WIDTH : \
-                                       RW_MGR_MEM_IF_READ_DQS_WIDTH)
-#define MAX_DQ                         (RW_MGR_MEM_DATA_WIDTH)
-#define MAX_DM                         (RW_MGR_MEM_DATA_MASK_WIDTH)
-
 /* length of VFIFO, from SW_MACROS */
 #define VFIFO_SIZE                     (READ_VALID_FIFO_SIZE)
 
@@ -212,25 +204,10 @@ struct socfpga_sdr_reg_file {
 
 /* parameter variable holder */
 struct param_type {
-       uint32_t dm_correct_mask;
-       uint32_t read_correct_mask;
-       uint32_t read_correct_mask_vg;
-       uint32_t write_correct_mask;
-       uint32_t write_correct_mask_vg;
-
-       /* set a particular entry to 1 if we need to skip a particular rank */
-
-       uint32_t skip_ranks[MAX_RANKS];
-
-       /* set a particular entry to 1 if we need to skip a particular group */
-
-       uint32_t skip_groups;
-
-       /* set a particular entry to 1 if the shadow register
-       (which represents a set of ranks) needs to be skipped */
-
-       uint32_t skip_shadow_regs[NUM_SHADOW_REGS];
-
+       u32     read_correct_mask;
+       u32     read_correct_mask_vg;
+       u32     write_correct_mask;
+       u32     write_correct_mask_vg;
 };