ARCH_SUNXI || RISCV)
default "u-boot.kwb" if KIRKWOOD
default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
+ default "u-boot-with-spl.imx" if ARCH_MX6 && SPL
help
Some SoCs need special image types (e.g. U-Boot binary
with a special header) as build targets. By defining
endif
endif
ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
-ifeq ($(CONFIG_MX6)$(CONFIG_SECURE_BOOT), yy)
+ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
else
-ifeq ($(CONFIG_MX7)$(CONFIG_SECURE_BOOT), yy)
+ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
else
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
+ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
+u-boot.cnt: u-boot.bin FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+else
flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
endif
+endif
u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
select ARCH_MISC_INIT
select BOARD_EARLY_INIT_F
select CPU_V7A
- select SYS_FSL_HAS_SEC if SECURE_BOOT
+ select SYS_FSL_HAS_SEC if IMX_HAB
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
imply MXC_GPIO
config ARCH_MX6
bool "Freescale MX6"
select CPU_V7A
- select SYS_FSL_HAS_SEC if SECURE_BOOT
+ select SYS_FSL_HAS_SEC if IMX_HAB
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
select SYS_THUMB_BUILD if SPL
* BootROM code right after having initialized a few components like the DRAM).
* The following function is called from SPL common code (board_init_r).
*/
-void board_return_to_bootrom(void)
+int board_return_to_bootrom(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev)
{
/*
* Retrieve the BootROM's stack pointer and jump back to the start of
"bl back_to_bootrom;"
#endif
);
+
+ return 0;
}
imx53-kp.dtb \
imx53-m53menlo.dtb
-dtb-$(CONFIG_MX6Q) += \
- imx6-apalis.dtb \
- imx6q-display5.dtb \
- imx6q-logicpd.dtb \
- imx6q-novena.dtb \
- imx6q-tbs2910.dtb
-
-dtb-$(CONFIG_MX6QDL) += \
+ifneq ($(CONFIG_MX6DL)$(CONFIG_MX6QDL)$(CONFIG_MX6S),)
+dtb-y += \
imx6dl-dhcom-pdk2.dtb \
imx6dl-icore.dtb \
imx6dl-icore-mipi.dtb \
imx6dl-icore-rqs.dtb \
imx6dl-mamoj.dtb \
+ imx6dl-nitrogen6x.dtb \
+ imx6dl-pico.dtb \
imx6dl-sabreauto.dtb \
imx6dl-sabresd.dtb \
imx6dl-wandboard-revb1.dtb \
+
+endif
+
+ifneq ($(CONFIG_MX6Q)$(CONFIG_MX6QDL),)
+dtb-y += \
+ imx6-apalis.dtb \
imx6q-cm-fx6.dtb \
imx6q-dhcom-pdk2.dtb \
+ imx6q-display5.dtb \
imx6q-icore.dtb \
imx6q-icore-mipi.dtb \
imx6q-icore-rqs.dtb \
+ imx6q-logicpd.dtb \
+ imx6q-nitrogen6x.dtb \
+ imx6q-novena.dtb \
+ imx6q-pico.dtb \
imx6q-sabreauto.dtb \
+ imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
+ imx6q-tbs2910.dtb \
imx6q-wandboard-revb1.dtb \
imx6qp-sabreauto.dtb \
imx6qp-sabresd.dtb \
- imx6qp-wandboard-revd1.dtb
+ imx6qp-wandboard-revd1.dtb \
+
+endif
dtb-$(CONFIG_MX6SL) += imx6sl-evk.dtb
imx6ull-14x14-evk.dtb \
imx6ull-colibri.dtb \
imx6ull-phycore-segin.dtb \
- imx6ull-dart-6ul.dtb
+ imx6ull-dart-6ul.dtb \
+ imx6ulz-14x14-evk.dtb
dtb-$(CONFIG_ARCH_MX6) += \
imx6-apalis.dtb \
fsl-imx8qxp-colibri.dtb \
fsl-imx8qxp-mek.dtb
-dtb-$(CONFIG_ARCH_IMX8M) += fsl-imx8mq-evk.dtb
+dtb-$(CONFIG_ARCH_IMX8M) += fsl-imx8mq-evk.dtb \
+ imx8mm-evk.dtb
dtb-$(CONFIG_RCAR_GEN2) += \
r8a7790-lager-u-boot.dtb \
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/pins-imx8mq.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
+#include <dt-bindings/power/imx8mq-power.h>
#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
};
- power: power-controller {
- compatible = "fsl,imx8mq-pm-domain";
- num-domains = <11>;
- #power-domain-cells = <1>;
- };
-
pwm2: pwm@30670000 {
compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
reg = <0x0 0x30670000 0x0 0x10000>;
#clock-cells = <1>;
};
+ src: reset-controller@30390000 {
+ compatible = "fsl,imx8mq-src", "syscon";
+ reg = <0x0 0x30390000 0x0 0x10000>;
+ #reset-cells = <1>;
+ };
+
gpc: gpc@303a0000 {
compatible = "fsl,imx8mq-gpc", "fsl,imx7d-gpc", "syscon";
reg = <0x0 0x303a0000 0x0 0x10000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * As per comment in ATF source code:
+ *
+ * PCIE1 and PCIE2 share the
+ * same reset signal, if we
+ * power down PCIE2, PCIE1
+ * will be held in reset too.
+ *
+ * So instead of creating two
+ * separate power domains for
+ * PCIE1 and PCIE2 we create a
+ * link between both and use
+ * it as a shared PCIE power
+ * domain.
+ */
+ pgc_pcie: power-domain@1 {
+ #power-domain-cells = <0>;
+ reg = <IMX8M_POWER_DOMAIN_PCIE1>;
+ power-domains = <&pgc_pcie2>;
+ };
+
+ pgc_pcie2: power-domain@a {
+ #power-domain-cells = <0>;
+ reg = <IMX8M_POWER_DOMAIN_PCIE2>;
+ };
+ };
};
usdhc1: usdhc@30b40000 {
aliases {
ethernet0 = &fec1;
ethernet1 = &fec2;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ gpio6 = &gpio7;
serial0 = &lpuart0;
serial1 = &lpuart1;
serial2 = &lpuart2;
*
* SPDX-License-Identifier: GPL-2.0+ or X11
*/
-#include "imx28.dtsi"
&gpio0 {
gpio-ranges = <&pinctrl 0 0 29>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013-2019 Boundary Devices, Inc.
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-nitrogen6x.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board";
+ compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+// Richard Hu <richard.hu@technexion.com>
+// Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico.dtsi"
+
+/ {
+ model = "TechNexion PICO-IMX6 DualLite/Solo";
+ compatible = "technexion,imx6dl-pico", "fsl,imx6dl";
+};
chosen {
stdout-path = &uart5;
};
+
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&wdog1>;
+ };
};
&i2c3 {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013-2019 Boundary Devices, Inc.
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6x.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX6 Quad Nitrogen6x Board";
+ compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+// Richard Hu <richard.hu@technexion.com>
+// Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico.dtsi"
+
+/ {
+ model = "TechNexion PICO-IMX6 Quad";
+ compatible = "technexion,imx6q-pico", "fsl,imx6q";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013-2019 Boundary Devices, Inc.
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad SABRE Lite Board";
+ compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013-2019 Boundary Devices, Inc.
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include "imx6qdl-sabrelite.dtsi"
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+#undef GP_ENET_PHY_RESET
+#define GP_ENET_PHY_RESET <&gpio1 27 GPIO_ACTIVE_LOW>
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x030b0
+#define GPIRQ_ENET_PHY <&gpio1 28 IRQ_TYPE_LEVEL_LOW>
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* Spare */
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0
+ MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x1b0b0
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ >;
+ };
+};
+
+&fec {
+#if 0
+ phy-reset-gpios = GP_ENET_PHY_RESET;
+#endif
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usdhc3 {
+ /delete-property/ wp-gpios;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+// Richard Hu <richard.hu@technexion.com>
+// Tapani Utriainen <tapani@technexion.com>
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ mmc0 = &usdhc3;
+ usb0 = &usbotg;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ reg_2p5v: regulator-2p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_vbus>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii-id";
+ phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie_reset>;
+ reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 { /* Bluetooth module */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <8>;
+ cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usdhc2 { /* Wifi/BT */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x4001b0b5 /* PICO_P24 */
+ MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x4001b0b5 /* PICO_P25 */
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x4001b0b5 /* PICO_P26 */
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b5 /* PICO_P28 */
+ MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b0b5 /* PICO_P30 */
+ MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b0b5 /* PICO_P32 */
+ MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x4001b0b5 /* PICO_P34 */
+ MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x4001b0b5 /* PICO_P42 */
+ MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x4001b0b5 /* PICO_P44 */
+ MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x4001b0b5 /* PICO_P48 */
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x000f0b0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x1b0b1
+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x1b0b1
+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x1b0b1
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000f0b0
+ MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x000f0b0
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1f0b1
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pcie_reset: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x130b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
+ MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usbotg_vbus: usbotgvbusgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x17071
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0xb0b1
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013-2019 Boundary Devices, Inc.
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x000b1
+#define GP_ECSPI1_NOR_CS <&gpio3 19 GPIO_ACTIVE_LOW>
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x0b0b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+#undef GP_ENET_PHY_RESET
+#define GP_ENET_PHY_RESET <&gpio3 23 GPIO_ACTIVE_LOW>
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x030b0
+#define GPIRQ_ENET_PHY <&gpio1 28 IRQ_TYPE_LEVEL_LOW>
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* Spare */
+ MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c1_1: i2c1-1grp {
+ fsl,pins = <
+#define GP_I2C1_SCL <&gpio3 21 GPIO_ACTIVE_HIGH>
+ MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1
+#define GP_I2C1_SDA <&gpio3 28 GPIO_ACTIVE_HIGH>
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2_1: i2c2-1grp {
+ fsl,pins = <
+#define GP_I2C2_SCL <&gpio4 12 GPIO_ACTIVE_HIGH>
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
+#define GP_I2C2_SDA <&gpio4 13 GPIO_ACTIVE_HIGH>
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+#define GPIRQ_I2C3_J7 <&gpio1 9 IRQ_TYPE_EDGE_FALLING>
+#define GP_I2C3_J7 <&gpio1 9 GPIO_ACTIVE_LOW>
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c3_1: i2c3-1grp {
+ fsl,pins = <
+#define GP_I2C3_SCL <&gpio1 5 GPIO_ACTIVE_HIGH>
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1
+#define GP_I2C3_SDA <&gpio7 11 GPIO_ACTIVE_HIGH>
+ MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_reg_usbotg_vbus: reg-usbotg-vbusgrp {
+ fsl,pins = <
+#define GP_REG_USBOTG <&gpio3 22 GPIO_ACTIVE_HIGH>
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x030b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+#define GP_USBH1_HUB_RESET <&gpio7 12 GPIO_ACTIVE_LOW>
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0b0b0
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+#define GP_USDHC3_CD <&gpio7 0 GPIO_ACTIVE_LOW>
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
+#define GP_USDHC3_WP <&gpio7 1 GPIO_ACTIVE_HIGH>
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+#define GP_USDHC4_CD <&gpio2 6 GPIO_ACTIVE_LOW>
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0
+ >;
+ };
+};
+
+/ {
+ aliases {
+ mmc0 = &usdhc3;
+ mmc1 = &usdhc4;
+ pwm_lcd = &pwm1;
+ pwm_lvds = &pwm4;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ reg_3p3v: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = GP_REG_USBOTG;
+ enable-active-high;
+ };
+};
+
+&ecspi1 {
+ cs-gpios = GP_ECSPI1_NOR_CS;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "sst,sst25vf016b", "jedec,spi-nor";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ mtd@00000000 {
+ label = "U-Boot";
+ reg = <0x0 0xC0000>;
+ };
+
+ mtd@000C0000 {
+ label = "env";
+ reg = <0xC0000 0x2000>;
+ };
+ mtd@000C2000 {
+ label = "splash";
+ reg = <0xC2000 0x13e000>;
+ };
+ };
+};
+
+&fec {
+ phy-handle = <ðphy>;
+ phy-mode = "rgmii";
+#if 0
+ phy-reset-gpios = GP_ENET_PHY_RESET;
+#endif
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ rxdv-skew-ps = <0>;
+ status = "okay";
+ txc-skew-ps = <3000>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
+ txen-skew-ps = <0>;
+
+ mdio {
+ #address-cells = <0>;
+ #size-cells = <1>;
+
+ ethphy: ethernet-phy {
+ interrupts-extended = GPIRQ_ENET_PHY;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_1>;
+ scl-gpios = GP_I2C1_SCL;
+ sda-gpios = GP_I2C1_SDA;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_1>;
+ scl-gpios = GP_I2C2_SCL;
+ sda-gpios = GP_I2C2_SDA;
+ status = "okay";
+
+ hdmi_edid: edid@50 {
+ compatible = "fsl,imx6-hdmi-i2c";
+ reg = <0x50>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_1>;
+ scl-gpios = GP_I2C3_SCL;
+ sda-gpios = GP_I2C3_SDA;
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ disable-over-current;
+ reset-gpios = GP_USBH1_HUB_RESET;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = GP_USDHC3_CD;
+ wp-gpios = GP_USDHC3_WP;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ cd-gpios = GP_USDHC4_CD;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
/ {
aliases {
usb0 = &usbotg;
+ video0 = &ipu1;
};
soc {
u-boot,dm-spl;
+ u-boot,dm-pre-reloc;
aips-bus@2000000 {
u-boot,dm-spl;
&iomuxc {
u-boot,dm-spl;
};
+
+&ipu1 {
+ u-boot,dm-pre-reloc;
+};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
+ phy-handle = <ðphy>;
phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
fsl,err006687-workaround-present;
status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
};
&spdif {
i2c1 = &i2c2;
i2c2 = &i2c3;
ipu0 = &ipu1;
- video0 = &ipu1;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
mmc2 = &usdhc3;
compatible = "simple-bus";
interrupt-parent = <&gpc>;
ranges;
- u-boot,dm-pre-reloc;
dma_apbh: dma-apbh@110000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
<&clks IMX6QDL_CLK_IPU1_DI1>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
- u-boot,dm-pre-reloc;
ipu1_csi0: port@0 {
reg = <0>;
* Copyright 2018 NXP
*/
+&{/aliases} {
+ u-boot,dm-pre-reloc;
+ display0 = &lcdif;
+};
+
&qspi {
flash0: n25q256a@0 {
compatible = "jedec,spi-nor";
};
-};
\ No newline at end of file
+};
+
+&{/soc} {
+ u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+ u-boot,dm-pre-reloc;
+};
+
+&iomuxc {
+ u-boot,dm-pre-reloc;
+};
+
+&lcdif {
+ display = <&display0>;
+ u-boot,dm-pre-reloc;
+
+ display0: display@0 {
+ bits-per-pixel = <16>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing0 {
+ clock-frequency = <9200000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <8>;
+ hback-porch = <4>;
+ hsync-len = <41>;
+ vback-porch = <2>;
+ vfront-porch = <4>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- * Copyright 2017-2018 NXP
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
/dts-v1/;
#include "imx6ul.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
/ {
model = "Freescale i.MX6 UltraLite 14x14 EVK Board";
compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
-
- aliases {
- spi5 = &soft_spi;
- };
-
- chosen {
- stdout-path = &uart1;
- };
-
- memory {
- reg = <0x80000000 0x20000000>;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_sd1_vmmc: regulator@1 {
- compatible = "regulator-fixed";
- regulator-name = "VSD_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- off-on-delay = <20000>;
- enable-active-high;
- };
-
- reg_can_3v3: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "can-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
- };
-
- reg_gpio_dvfs: regulator-gpio {
- compatible = "regulator-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_dvfs>;
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "gpio_dvfs";
- regulator-type = "voltage";
- gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
- states = <1300000 0x1 1400000 0x0>;
- };
- };
-
- soft_spi: soft-spi {
- compatible = "spi-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spi4>;
- pinctrl-assert-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
- status = "okay";
- gpio-sck = <&gpio5 11 0>;
- gpio-mosi = <&gpio5 10 0>;
- cs-gpios = <&gpio5 7 0>;
- num-chipselects = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpio_spi: gpio_spi@0 {
- compatible = "fairchild,74hc595";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0>;
- registers-number = <1>;
- registers-default = /bits/ 8 <0x57>;
- spi-max-frequency = <100000>;
- };
- };
-};
-
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet1>;
- phy-mode = "rmii";
- phy-handle = <ðphy0>;
- status = "okay";
-};
-
-&fec2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet2>;
- phy-mode = "rmii";
- phy-handle = <ðphy1>;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@2 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <2>;
- };
-
- ethphy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
- };
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c1>;
- pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
- status = "okay";
-
- mag3110@0e {
- compatible = "fsl,mag3110";
- reg = <0x0e>;
- position = <2>;
- };
-
- fxls8471@1e {
- compatible = "fsl,fxls8471";
- reg = <0x1e>;
- position = <0>;
- interrupt-parent = <&gpio5>;
- interrupts = <0 8>;
- };
-};
-
-&i2c2 {
- clock_frequency = <100000>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c2>;
- pinctrl-1 = <&pinctrl_i2c2_gpio>;
- scl-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog_1>;
- imx6ul-evk {
- pinctrl_hog_1: hoggrp-1 {
- fsl,pins = <
- MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */
- MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */
- MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */
- MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x80000000
- >;
- };
-
- pinctrl_dvfs: dvfsgrp {
- fsl,pins = <
- MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x79
- >;
- };
-
- pinctrl_enet1: enet1grp {
- fsl,pins = <
- MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
- MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
- MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
- MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
- MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
- MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
- MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
- MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
- >;
- };
-
- pinctrl_enet2: enet2grp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
- MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
- MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
- MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
- MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
- MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
- MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
- MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
- MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
- MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
- MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
- >;
- };
-
- pinctrl_i2c1_gpio: i2c1grp_gpio {
- fsl,pins = <
- MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0
- MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0
- >;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
- MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
- >;
- };
-
- pinctrl_i2c2_gpio: i2c2grp_gpio {
- fsl,pins = <
- MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b8b0
- MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x1b8b0
- >;
- };
-
- pinctrl_qspi: qspigrp {
- fsl,pins = <
- MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1
- MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
- MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1
- MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1
- MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1
- MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1
- >;
- };
-
- pinctrl_spi4: spi4grp {
- fsl,pins = <
- MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1
- MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1
- MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1
- MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
- MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
- >;
- };
-
- pinctrl_usb_otg1_id: usbotg1idgrp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
- >;
- };
-
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
- fsl,pins = <
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
- >;
- };
-
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
- fsl,pins = <
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069
- MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
- MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
- MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
- MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
- MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
- >;
- };
-
- pinctrl_usdhc2_8bit: usdhc2grp_8bit {
- fsl,pins = <
- MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069
- MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
- MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
- MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
- MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
- MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
- MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
- MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
- MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
- MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
- >;
- };
-
- pinctrl_usdhc2_8bit_100mhz: usdhc2grp_8bit_100mhz {
- fsl,pins = <
- MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9
- MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9
- MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9
- MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9
- MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9
- MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9
- MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170b9
- MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170b9
- MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170b9
- MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170b9
- >;
- };
-
- pinctrl_usdhc2_8bit_200mhz: usdhc2grp_8bit_200mhz {
- fsl,pins = <
- MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9
- MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9
- MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
- MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
- MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
- MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
- MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9
- MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9
- MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9
- MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9
- >;
- };
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
- >;
- };
- };
-};
-
-&qspi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_qspi>;
- status = "okay";
- ddrsmp=<0>;
-
- flash0: n25q256a@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "micron,n25q256a";
- spi-max-frequency = <29000000>;
- spi-nor,ddr-quad-read-dummy = <6>;
- reg = <0>;
- };
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-&usbotg1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_otg1_id>;
- dr_mode = "otg";
- srp-disable;
- hnp-disable;
- adp-disable;
- status = "okay";
-};
-
-&usbotg2 {
- dr_mode = "host";
- disable-over-current;
- status = "okay";
-};
-
-&usbphy1 {
- tx-d-cal = <0x5>;
-};
-
-&usbphy2 {
- tx-d-cal = <0x5>;
-};
-
-&usdhc1 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc1>;
- pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
- cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
- keep-power-in-suspend;
- wakeup-source;
- vmmc-supply = <®_sd1_vmmc>;
- status = "okay";
-};
-
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- non-removable;
- status = "okay";
-};
-
-&wdog1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdog>;
- fsl,ext-reset-output;
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+/ {
+ aliases {
+ spi5 = &{/spi4};
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ backlight_display: backlight-display {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+
+ reg_sd1_vmmc: regulator-sd1-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can_3v3: regulator-can-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "can-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
+ };
+
+ spi4 {
+ compatible = "spi-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi4>;
+ status = "okay";
+ gpio-sck = <&gpio5 11 0>;
+ gpio-mosi = <&gpio5 10 0>;
+ cs-gpios = <&gpio5 7 0>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio_spi: gpio@0 {
+ compatible = "fairchild,74hc595";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ registers-number = <1>;
+ spi-max-frequency = <100000>;
+ };
+ };
+
+ panel {
+ compatible = "innolux,at043tn24";
+ backlight = <&backlight_display>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <786432000>;
+};
+
+&i2c2 {
+ clock_frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ codec: wm8960@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ wlf,shared-lrclk;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ status = "okay";
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@2 {
+ reg = <2>;
+ micrel,led-mode = <1>;
+ clocks = <&clks IMX6UL_CLK_ENET_REF>;
+ clock-names = "rmii-ref";
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ micrel,led-mode = <1>;
+ clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+ clock-names = "rmii-ref";
+ };
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can_3v3>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can_3v3>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ mag3110@e {
+ compatible = "fsl,mag3110";
+ reg = <0x0e>;
+ };
+};
+
+&lcdif {
+ assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
+ assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi>;
+ status = "okay";
+
+ flash0: n25q256a@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q256a";
+ spi-max-frequency = <29000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ reg = <0>;
+ };
+};
+
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+ <&clks IMX6UL_CLK_SAI2>;
+ assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <0>, <12288000>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&tsc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc>;
+ xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ measure-delay-time = <0xffff>;
+ pre-charge-time = <0xfff>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbphy1 {
+ fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+ fsl,tx-d-cal = <106>;
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ wakeup-source;
+ vmmc-supply = <®_sd1_vmmc>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ wakeup-source;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+
+ pinctrl_csi1: csi1grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
+ MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
+ MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
+ MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088
+ MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088
+ MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088
+ MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088
+ MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088
+ MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088
+ MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088
+ MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088
+ MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp{
+ fsl,pins = <
+ MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
+ MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp{
+ fsl,pins = <
+ MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
+ MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1grp_gpio {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0
+ MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+ MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
+ MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
+ MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
+ MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
+ MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
+ MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ /* used for lcd reset */
+ MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79
+ >;
+ };
+
+ pinctrl_qspi: qspigrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1
+ MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
+ MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1
+ MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1
+ MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1
+ MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
+ MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
+ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088
+ MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088
+ MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
+ MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_sim2: sim2grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0xb808
+ MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x31
+ MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0xb808
+ MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0xb808
+ MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0xb809
+ MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x3008
+ >;
+ };
+
+ pinctrl_spi4: spi4grp {
+ fsl,pins = <
+ MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1
+ MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1
+ MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000
+ >;
+ };
+
+ pinctrl_tsc: tscgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
+ MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1
+ MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */
+ MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */
+ MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
+ >;
+ };
+};
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
+ * Copyright 2014 - 2015 Freescale Semiconductor, Inc.
*/
#ifndef __DTS_IMX6UL_PINFUNC_H
#define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M 0x0044 0x02d0 0x0000 3 0
#define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY 0x0044 0x02d0 0x04c0 4 0
#define MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0044 0x02d0 0x0000 5 0
-#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00 0x0044 0x02d0 0x0000 6 0
+#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00 0x0044 0x02d0 0x0610 6 0
#define MX6UL_PAD_JTAG_TMS__SJC_TMS 0x0048 0x02d4 0x0000 0 0
#define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1 0x0048 0x02d4 0x0598 1 0
-#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x0048 0x02d4 0x0000 2 0
+#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x0048 0x02d4 0x05f0 2 0
#define MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x0048 0x02d4 0x0000 3 0
#define MX6UL_PAD_JTAG_TMS__CCM_WAIT 0x0048 0x02d4 0x0000 4 0
#define MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x0048 0x02d4 0x0000 5 0
-#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01 0x0048 0x02d4 0x0000 6 0
+#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01 0x0048 0x02d4 0x0614 6 0
#define MX6UL_PAD_JTAG_TMS__EPIT1_OUT 0x0048 0x02d4 0x0000 8 0
#define MX6UL_PAD_JTAG_TDO__SJC_TDO 0x004c 0x02d8 0x0000 0 0
#define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2 0x004c 0x02d8 0x059c 1 0
#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x0054 0x02e0 0x05f4 2 0
#define MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x0054 0x02e0 0x0000 4 0
#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x0054 0x02e0 0x0000 5 0
+#define MX6UL_PAD_JTAG_TCK__OSC32K_32K_OUT 0x0054 0x02e0 0x0000 6 0
#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL 0x0054 0x02e0 0x0000 8 0
#define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB 0x0058 0x02e4 0x0000 0 0
#define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3 0x0058 0x02e4 0x0000 1 0
#define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x0058 0x02e4 0x0000 2 0
#define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x0058 0x02e4 0x0000 4 0
#define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x0058 0x02e4 0x0000 5 0
+#define MX6UL_PAD_JTAG_TRST_B__REF_CLK_24M 0x0058 0x02e4 0x0000 6 0
#define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS 0x0058 0x02e4 0x0000 8 0
#define MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x005c 0x02e8 0x05ac 0 1
#define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1 0x005c 0x02e8 0x058c 1 0
#define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M 0x0064 0x02f0 0x0000 3 0
#define MX6UL_PAD_GPIO1_IO02__USDHC1_WP 0x0064 0x02f0 0x066c 4 0
#define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x0064 0x02f0 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00 0x0064 0x02f0 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00 0x0064 0x02f0 0x0610 6 1
#define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET 0x0064 0x02f0 0x0000 7 0
#define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX 0x0064 0x02f0 0x0000 8 0
#define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX 0x0064 0x02f0 0x0624 8 0
#define MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x0068 0x02f4 0x05a8 0 1
#define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3 0x0068 0x02f4 0x0000 1 0
#define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC 0x0068 0x02f4 0x0660 2 0
+#define MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x0068 0x02f4 0x0000 3 0
#define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B 0x0068 0x02f4 0x0668 4 0
#define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x0068 0x02f4 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_eXT_CLK 0x0068 0x02f4 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_EXT_CLK 0x0068 0x02f4 0x0000 6 0
#define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK 0x0068 0x02f4 0x0000 7 0
-#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX 0x0068 0x02f4 0x0000 8 0
#define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX 0x0068 0x02f4 0x0624 8 1
+#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX 0x0068 0x02f4 0x0000 8 0
#define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1 0x006c 0x02f8 0x0574 0 1
#define MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x006c 0x02f8 0x0000 1 0
#define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x006c 0x02f8 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO04__REF_CLK_24M 0x006c 0x02f8 0x0000 3 0
#define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B 0x006c 0x02f8 0x0000 4 0
#define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x006c 0x02f8 0x0000 5 0
#define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN 0x006c 0x02f8 0x0000 6 0
#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06 0x0094 0x0320 0x04dc 3 0
#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1 0x0094 0x0320 0x058c 4 1
#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x0094 0x0320 0x0000 5 0
-#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0 0x0094 0x0320 0x0000 8 0
+#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0 0x0094 0x0320 0x0560 8 0
#define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0098 0x0324 0x062c 0 1
#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0098 0x0324 0x0000 0 0
#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03 0x0098 0x0324 0x0000 1 0
#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX 0x00a4 0x0330 0x0634 0 0
#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02 0x00a4 0x0330 0x0000 1 0
#define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD 0x00a4 0x0330 0x0000 2 0
-#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01 0x00a4 0x0330 0x0000 3 0
+#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01 0x00a4 0x0330 0x04d4 3 0
#define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x00a4 0x0330 0x0000 4 0
#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS 0x00a4 0x0330 0x0628 4 2
#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x00a4 0x0330 0x0000 5 0
#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX 0x00a8 0x0334 0x0000 0 0
#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03 0x00a8 0x0334 0x0000 1 0
#define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD 0x00a8 0x0334 0x0000 2 0
-#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00 0x00a8 0x0334 0x0000 3 0
+#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00 0x00a8 0x0334 0x04d0 3 0
#define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x00a8 0x0334 0x0628 4 3
#define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS 0x00a8 0x0334 0x0000 4 0
#define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x00a8 0x0334 0x0000 5 0
#define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS 0x00ac 0x0338 0x0630 0 0
#define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK 0x00ac 0x0338 0x0000 1 0
#define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x00ac 0x0338 0x0000 2 0
-#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10 0x00ac 0x0338 0x0000 3 0
+#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10 0x00ac 0x0338 0x04ec 3 0
#define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN 0x00ac 0x0338 0x0000 4 0
#define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x00ac 0x0338 0x0000 5 0
#define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT 0x00ac 0x0338 0x0000 8 0
#define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS 0x00b0 0x033c 0x0000 0 0
#define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER 0x00b0 0x033c 0x0000 1 0
#define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x00b0 0x033c 0x0584 2 0
-#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11 0x00b0 0x033c 0x0000 3 0
+#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11 0x00b0 0x033c 0x04f0 3 0
#define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT 0x00b0 0x033c 0x0000 4 0
#define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x00b0 0x033c 0x0000 5 0
#define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B 0x00b0 0x033c 0x0000 8 0
#define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX 0x00b4 0x0340 0x063c 0 0
#define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02 0x00b4 0x0340 0x0000 1 0
#define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x00b4 0x0340 0x05a4 2 1
-#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12 0x00b4 0x0340 0x0000 3 0
+#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12 0x00b4 0x0340 0x04f4 3 0
#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02 0x00b4 0x0340 0x0000 4 0
#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x00b4 0x0340 0x0000 5 0
#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x00b4 0x0340 0x0544 8 1
#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX 0x00b8 0x0344 0x0000 0 0
#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03 0x00b8 0x0344 0x0000 1 0
#define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x00b8 0x0344 0x05a8 2 2
-#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13 0x00b8 0x0344 0x0000 3 0
+#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13 0x00b8 0x0344 0x04f8 3 0
#define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01 0x00b8 0x0344 0x0000 4 0
#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x00b8 0x0344 0x0000 5 0
-#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x00b8 0x0344 0x0000 8 0
+#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x00b8 0x0344 0x0550 8 1
#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x00bc 0x0348 0x0000 5 0
#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x00bc 0x0348 0x054c 8 0
#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x00bc 0x0348 0x0000 0 0
#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00bc 0x0348 0x0644 0 4
#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS 0x00bc 0x0348 0x0000 1 0
#define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x00bc 0x0348 0x05ac 2 2
-#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14 0x00bc 0x0348 0x0000 3 0
+#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14 0x00bc 0x0348 0x04fc 3 0
#define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00 0x00bc 0x0348 0x0000 4 0
#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00c0 0x034c 0x0644 0 5
#define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX 0x00c0 0x034c 0x0000 0 0
#define MX6UL_PAD_UART5_RX_DATA__ENET2_COL 0x00c0 0x034c 0x0000 1 0
#define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x00c0 0x034c 0x05b0 2 2
-#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15 0x00c0 0x034c 0x0000 3 0
+#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15 0x00c0 0x034c 0x0500 3 0
#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB 0x00c0 0x034c 0x0000 4 0
#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x00c0 0x034c 0x0000 5 0
#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x00c0 0x034c 0x0548 8 1
#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS 0x00c4 0x0350 0x0638 1 0
#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS 0x00c4 0x0350 0x0000 1 0
#define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT 0x00c4 0x0350 0x0000 2 0
-#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16 0x00c4 0x0350 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16 0x00c4 0x0350 0x0504 3 0
#define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x00c4 0x0350 0x0000 4 0
#define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x00c4 0x0350 0x0000 5 0
-#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00 0x00c4 0x0350 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00 0x00c4 0x0350 0x05d0 6 0
#define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL 0x00c4 0x0350 0x0000 8 0
#define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x00c8 0x0354 0x0000 0 0
#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS 0x00c8 0x0354 0x0000 1 0
#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS 0x00c8 0x0354 0x0638 1 1
#define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT 0x00c8 0x0354 0x0000 2 0
-#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17 0x00c8 0x0354 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17 0x00c8 0x0354 0x0508 3 0
#define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x00c8 0x0354 0x0584 4 1
#define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x00c8 0x0354 0x0000 5 0
-#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00 0x00c8 0x0354 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00 0x00c8 0x0354 0x05c4 6 0
#define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL 0x00c8 0x0354 0x0000 8 0
#define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x00cc 0x0358 0x0000 0 0
#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00cc 0x0358 0x0640 1 3
#define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS 0x00cc 0x0358 0x0000 1 0
-#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18 0x00cc 0x0358 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT 0x00cc 0x0358 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18 0x00cc 0x0358 0x050c 3 0
#define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x00cc 0x0358 0x0000 4 0
#define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x00cc 0x0358 0x0000 5 0
-#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01 0x00cc 0x0358 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01 0x00cc 0x0358 0x05d4 6 0
#define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT 0x00cc 0x0358 0x0000 8 0
#define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x00d0 0x035c 0x0000 0 0
#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS 0x00d0 0x035c 0x0000 1 0
#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00d0 0x035c 0x0640 1 4
-#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19 0x00d0 0x035c 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_DATA0__REF_CLK_24M 0x00d0 0x035c 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19 0x00d0 0x035c 0x0510 3 0
#define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x00d0 0x035c 0x0588 4 1
#define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x00d0 0x035c 0x0000 5 0
-#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01 0x00d0 0x035c 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01 0x00d0 0x035c 0x05c8 6 0
#define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT 0x00d0 0x035c 0x0000 8 0
#define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x00d4 0x0360 0x0000 0 0
#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS 0x00d4 0x0360 0x0000 1 0
#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS 0x00d4 0x0360 0x0648 1 2
#define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT 0x00d4 0x0360 0x0000 2 0
-#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20 0x00d4 0x0360 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20 0x00d4 0x0360 0x0514 3 0
#define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x00d4 0x0360 0x0580 4 1
#define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x00d4 0x0360 0x0000 5 0
-#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02 0x00d4 0x0360 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02 0x00d4 0x0360 0x05d8 6 0
#define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB 0x00d4 0x0360 0x0000 8 0
#define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x00d8 0x0364 0x0000 0 0
#define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS 0x00d8 0x0364 0x0648 1 3
#define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS 0x00d8 0x0364 0x0000 1 0
#define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00d8 0x0364 0x0000 2 0
-#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21 0x00d8 0x0364 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21 0x00d8 0x0364 0x0518 3 0
#define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x00d8 0x0364 0x0000 4 0
#define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0x00d8 0x0364 0x0000 5 0
-#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02 0x00d8 0x0364 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02 0x00d8 0x0364 0x05cc 6 0
#define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB 0x00d8 0x0364 0x0000 8 0
#define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK 0x00dc 0x0368 0x0000 0 0
#define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS 0x00dc 0x0368 0x0000 1 0
#define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS 0x00dc 0x0368 0x0650 1 0
#define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00dc 0x0368 0x0000 2 0
-#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22 0x00dc 0x0368 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22 0x00dc 0x0368 0x051c 3 0
#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x00dc 0x0368 0x0574 4 2
#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06 0x00dc 0x0368 0x0000 5 0
#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03 0x00dc 0x0368 0x0000 6 0
#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS 0x00e0 0x036c 0x0650 1 1
#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS 0x00e0 0x036c 0x0000 1 0
#define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x00e0 0x036c 0x0000 2 0
-#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23 0x00e0 0x036c 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23 0x00e0 0x036c 0x0520 3 0
#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE 0x00e0 0x036c 0x0000 4 0
#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x00e0 0x036c 0x0000 5 0
#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03 0x00e0 0x036c 0x0000 6 0
#define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x00e8 0x0374 0x0000 0 0
#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX 0x00e8 0x0374 0x064c 1 2
#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX 0x00e8 0x0374 0x0000 1 0
-#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_cLK 0x00e8 0x0374 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_CLK 0x00e8 0x0374 0x0000 2 0
#define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA 0x00e8 0x0374 0x05b8 3 1
#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x00e8 0x0374 0x0000 4 0
#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x00e8 0x0374 0x0000 5 0
#define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02 0x00f0 0x037c 0x0000 4 0
#define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x00f0 0x037c 0x0000 5 0
#define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05 0x00f0 0x037c 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_DATA0__REF_CLK_24M 0x00f0 0x037c 0x0000 8 0
#define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x00f4 0x0380 0x0000 0 0
#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x00f4 0x0380 0x0000 1 0
#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX 0x00f4 0x0380 0x065c 1 0
#define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x00f8 0x0384 0x0000 0 0
#define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x00f8 0x0384 0x065c 1 1
#define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX 0x00f8 0x0384 0x0000 1 0
-#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_cLK 0x00f8 0x0384 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_CLK 0x00f8 0x0384 0x0000 2 0
#define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x00f8 0x0384 0x056c 3 0
#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN 0x00f8 0x0384 0x0000 4 0
#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x00f8 0x0384 0x0000 5 0
#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x0100 0x038c 0x0658 1 1
#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS 0x0100 0x038c 0x0000 1 0
#define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN 0x0100 0x038c 0x0000 2 0
-#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0 0x0100 0x038c 0x0000 3 0
+#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0 0x0100 0x038c 0x0570 3 0
#define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25 0x0100 0x038c 0x0000 4 0
#define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x0100 0x038c 0x0000 5 0
#define MX6UL_PAD_ENET2_RX_ER__KPP_COL07 0x0100 0x038c 0x0000 6 0
#define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN 0x0104 0x0390 0x0000 1 0
#define MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x0104 0x0390 0x0000 2 0
#define MX6UL_PAD_LCD_CLK__UART4_DTE_RX 0x0104 0x0390 0x063c 2 2
-#define MX6UL_PAD_LCD_CLK__SAI3_MCLK 0x0104 0x0390 0x0000 3 0
+#define MX6UL_PAD_LCD_CLK__SAI3_MCLK 0x0104 0x0390 0x0600 3 0
#define MX6UL_PAD_LCD_CLK__EIM_CS2_B 0x0104 0x0390 0x0000 4 0
#define MX6UL_PAD_LCD_CLK__GPIO3_IO00 0x0104 0x0390 0x0000 5 0
#define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB 0x0104 0x0390 0x0000 8 0
#define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY 0x0110 0x039c 0x05dc 1 1
#define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS 0x0110 0x039c 0x0638 2 3
#define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS 0x0110 0x039c 0x0000 2 0
-#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA 0x0110 0x039c 0x0000 3 0
+#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA 0x0110 0x039c 0x0604 3 0
#define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B 0x0110 0x039c 0x0000 4 0
#define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03 0x0110 0x039c 0x0000 5 0
#define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2 0x0110 0x039c 0x0000 8 0
#define MX6UL_PAD_LCD_RESET__ECSPI2_SS3 0x0114 0x03a0 0x0000 8 0
#define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x0118 0x03a4 0x0000 0 0
#define MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x0118 0x03a4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA00__CA7_MX6UL_TRACE0 0x0118 0x03a4 0x0000 2 0
#define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN 0x0118 0x03a4 0x0000 3 0
#define MX6UL_PAD_LCD_DATA00__I2C3_SDA 0x0118 0x03a4 0x05b8 4 2
#define MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x0118 0x03a4 0x0000 5 0
#define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00 0x0118 0x03a4 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK 0x0118 0x03a4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK 0x0118 0x03a4 0x05e0 8 1
#define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x011c 0x03a8 0x0000 0 0
#define MX6UL_PAD_LCD_DATA01__PWM2_OUT 0x011c 0x03a8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA01__CA7_MX6UL_TRACE1 0x011c 0x03a8 0x0000 2 0
#define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT 0x011c 0x03a8 0x0000 3 0
#define MX6UL_PAD_LCD_DATA01__I2C3_SCL 0x011c 0x03a8 0x05b4 4 2
#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0x011c 0x03a8 0x0000 5 0
#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC 0x011c 0x03a8 0x05ec 8 0
#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x0120 0x03ac 0x0000 0 0
#define MX6UL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03ac 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA02__CA7_MX6UL_TRACE2 0x0120 0x03ac 0x0000 2 0
#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN 0x0120 0x03ac 0x0000 3 0
#define MX6UL_PAD_LCD_DATA02__I2C4_SDA 0x0120 0x03ac 0x05c0 4 2
#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x0120 0x03ac 0x0000 5 0
#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK 0x0120 0x03ac 0x05e8 8 0
#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x0124 0x03b0 0x0000 0 0
#define MX6UL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03b0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA03__CA7_MX6UL_TRACE3 0x0124 0x03b0 0x0000 2 0
#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT 0x0124 0x03b0 0x0000 3 0
#define MX6UL_PAD_LCD_DATA03__I2C4_SCL 0x0124 0x03b0 0x05bc 4 2
#define MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x0124 0x03b0 0x0000 5 0
#define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03 0x0124 0x03b0 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA 0x0124 0x03b0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA 0x0124 0x03b0 0x05e4 8 0
#define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x0128 0x03b4 0x0000 0 0
#define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS 0x0128 0x03b4 0x0000 1 0
#define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS 0x0128 0x03b4 0x0658 1 2
+#define MX6UL_PAD_LCD_DATA04__CA7_MX6UL_TRACE4 0x0128 0x03b4 0x0000 2 0
#define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN 0x0128 0x03b4 0x0000 3 0
#define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK 0x0128 0x03b4 0x0000 4 0
#define MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x0128 0x03b4 0x0000 5 0
#define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x012c 0x03b8 0x0000 0 0
#define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS 0x012c 0x03b8 0x0658 1 3
#define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS 0x012c 0x03b8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA05__CA7_MX6UL_TRACE5 0x012c 0x03b8 0x0000 2 0
#define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT 0x012c 0x03b8 0x0000 3 0
#define MX6UL_PAD_LCD_DATA05__SPDIF_OUT 0x012c 0x03b8 0x0000 4 0
#define MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x012c 0x03b8 0x0000 5 0
#define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x0130 0x03bc 0x0000 0 0
#define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS 0x0130 0x03bc 0x0000 1 0
#define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS 0x0130 0x03bc 0x0650 1 2
+#define MX6UL_PAD_LCD_DATA06__CA7_MX6UL_TRACE6 0x0130 0x03bc 0x0000 2 0
#define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN 0x0130 0x03bc 0x0000 3 0
#define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK 0x0130 0x03bc 0x0000 4 0
#define MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x0130 0x03bc 0x0000 5 0
#define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x0134 0x03c0 0x0000 0 0
#define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS 0x0134 0x03c0 0x0650 1 3
#define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS 0x0134 0x03c0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA07__CA7_MX6UL_TRACE7 0x0134 0x03c0 0x0000 2 0
#define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT 0x0134 0x03c0 0x0000 3 0
#define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK 0x0134 0x03c0 0x061c 4 0
#define MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x0134 0x03c0 0x0000 5 0
#define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3 0x0134 0x03c0 0x0000 8 0
#define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x0138 0x03c4 0x0000 0 0
#define MX6UL_PAD_LCD_DATA08__SPDIF_IN 0x0138 0x03c4 0x0618 1 2
-#define MX6UL_PAD_LCD_DATA08__CSI_DATA16 0x0138 0x03c4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA08__CA7_MX6UL_TRACE8 0x0138 0x03c4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA08__CSI_DATA16 0x0138 0x03c4 0x0504 3 1
#define MX6UL_PAD_LCD_DATA08__EIM_DATA00 0x0138 0x03c4 0x0000 4 0
#define MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x0138 0x03c4 0x0000 5 0
#define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08 0x0138 0x03c4 0x0000 6 0
#define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x0138 0x03c4 0x0000 8 0
#define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x013c 0x03c8 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK 0x013c 0x03c8 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA09__CSI_DATA17 0x013c 0x03c8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK 0x013c 0x03c8 0x0600 1 1
+#define MX6UL_PAD_LCD_DATA09__CA7_MX6UL_TRACE9 0x013c 0x03c8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA09__CSI_DATA17 0x013c 0x03c8 0x0508 3 1
#define MX6UL_PAD_LCD_DATA09__EIM_DATA01 0x013c 0x03c8 0x0000 4 0
#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0x013c 0x03c8 0x0000 5 0
#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09 0x013c 0x03c8 0x0000 6 0
#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x013c 0x03c8 0x0584 8 2
#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x0140 0x03cc 0x0000 0 0
#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC 0x0140 0x03cc 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA10__CSI_DATA18 0x0140 0x03cc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA10__CA7_MX6UL_TRACE10 0x0140 0x03cc 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA10__CSI_DATA18 0x0140 0x03cc 0x050c 3 1
#define MX6UL_PAD_LCD_DATA10__EIM_DATA02 0x0140 0x03cc 0x0000 4 0
#define MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0x0140 0x03cc 0x0000 5 0
#define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10 0x0140 0x03cc 0x0000 6 0
#define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x0140 0x03cc 0x0000 8 0
#define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x0144 0x03d0 0x0000 0 0
#define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK 0x0144 0x03d0 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA11__CSI_DATA19 0x0144 0x03d0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA11__CA7_MX6UL_TRACE11 0x0144 0x03d0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA11__CSI_DATA19 0x0144 0x03d0 0x0510 3 1
#define MX6UL_PAD_LCD_DATA11__EIM_DATA03 0x0144 0x03d0 0x0000 4 0
#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x0144 0x03d0 0x0000 5 0
#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11 0x0144 0x03d0 0x0000 6 0
#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0144 0x03d0 0x0588 8 2
#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x0148 0x03d4 0x0000 0 0
#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC 0x0148 0x03d4 0x060c 1 1
-#define MX6UL_PAD_LCD_DATA12__CSI_DATA20 0x0148 0x03d4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA12__CA7_MX6UL_TRACE12 0x0148 0x03d4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA12__CSI_DATA20 0x0148 0x03d4 0x0514 3 1
#define MX6UL_PAD_LCD_DATA12__EIM_DATA04 0x0148 0x03d4 0x0000 4 0
#define MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x0148 0x03d4 0x0000 5 0
#define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12 0x0148 0x03d4 0x0000 6 0
#define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY 0x0148 0x03d4 0x0000 8 0
#define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x014c 0x03d8 0x0000 0 0
#define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK 0x014c 0x03d8 0x0608 1 1
-#define MX6UL_PAD_LCD_DATA13__CSI_DATA21 0x014c 0x03d8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA13__CA7_MX6UL_TRACE13 0x014c 0x03d8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA13__CSI_DATA21 0x014c 0x03d8 0x0518 3 1
#define MX6UL_PAD_LCD_DATA13__EIM_DATA05 0x014c 0x03d8 0x0000 4 0
#define MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x014c 0x03d8 0x0000 5 0
#define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13 0x014c 0x03d8 0x0000 6 0
#define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B 0x014c 0x03d8 0x0000 8 0
#define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x0150 0x03dc 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA 0x0150 0x03dc 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA14__CSI_DATA22 0x0150 0x03dc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA 0x0150 0x03dc 0x0604 1 1
+#define MX6UL_PAD_LCD_DATA14__CA7_MX6UL_TRACE14 0x0150 0x03dc 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA14__CSI_DATA22 0x0150 0x03dc 0x051c 3 1
#define MX6UL_PAD_LCD_DATA14__EIM_DATA06 0x0150 0x03dc 0x0000 4 0
#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0x0150 0x03dc 0x0000 5 0
#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14 0x0150 0x03dc 0x0000 6 0
#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4 0x0150 0x03dc 0x068c 8 0
#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x0154 0x03e0 0x0000 0 0
#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA 0x0154 0x03e0 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA15__CSI_DATA23 0x0154 0x03e0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA15__CA7_MX6UL_TRACE15 0x0154 0x03e0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA15__CSI_DATA23 0x0154 0x03e0 0x0520 3 1
#define MX6UL_PAD_LCD_DATA15__EIM_DATA07 0x0154 0x03e0 0x0000 4 0
#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x0154 0x03e0 0x0000 5 0
#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15 0x0154 0x03e0 0x0000 6 0
#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x0158 0x03e4 0x0000 0 0
#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0158 0x03e4 0x0000 1 0
#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX 0x0158 0x03e4 0x0654 1 2
-#define MX6UL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x03e4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA16__CA7_MX6UL_TRACE_CLK 0x0158 0x03e4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x03e4 0x04d4 3 1
#define MX6UL_PAD_LCD_DATA16__EIM_DATA08 0x0158 0x03e4 0x0000 4 0
#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x0158 0x03e4 0x0000 5 0
#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24 0x0158 0x03e4 0x0000 6 0
#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x015c 0x03e8 0x0000 0 0
#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x015c 0x03e8 0x0654 1 3
#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX 0x015c 0x03e8 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA17__CSI_DATA00 0x015c 0x03e8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA17__CA7_MX6UL_TRACE_CTL 0x015c 0x03e8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA17__CSI_DATA00 0x015c 0x03e8 0x04d0 3 1
#define MX6UL_PAD_LCD_DATA17__EIM_DATA09 0x015c 0x03e8 0x0000 4 0
#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x015c 0x03e8 0x0000 5 0
#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25 0x015c 0x03e8 0x0000 6 0
#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x0160 0x03ec 0x0000 0 0
#define MX6UL_PAD_LCD_DATA18__PWM5_OUT 0x0160 0x03ec 0x0000 1 0
#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO 0x0160 0x03ec 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA18__CSI_DATA10 0x0160 0x03ec 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA18__CSI_DATA10 0x0160 0x03ec 0x04ec 3 1
#define MX6UL_PAD_LCD_DATA18__EIM_DATA10 0x0160 0x03ec 0x0000 4 0
#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x0160 0x03ec 0x0000 5 0
#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26 0x0160 0x03ec 0x0000 6 0
#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x0164 0x03f0 0x0000 0 0
#define MX6UL_PAD_LCD_DATA19__PWM6_OUT 0x0164 0x03f0 0x0000 1 0
#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY 0x0164 0x03f0 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA19__CSI_DATA11 0x0164 0x03f0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA19__CSI_DATA11 0x0164 0x03f0 0x04f0 3 1
#define MX6UL_PAD_LCD_DATA20__EIM_DATA12 0x0168 0x03f4 0x0000 4 0
#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25 0x0168 0x03f4 0x0000 5 0
#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28 0x0168 0x03f4 0x0000 6 0
#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0168 0x03f4 0x0000 1 0
#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX 0x0168 0x03f4 0x065c 1 2
#define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x0168 0x03f4 0x0534 2 0
-#define MX6UL_PAD_LCD_DATA20__CSI_DATA12 0x0168 0x03f4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA20__CSI_DATA12 0x0168 0x03f4 0x04f4 3 1
#define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x016c 0x03f8 0x0000 0 0
#define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x016c 0x03f8 0x065c 1 3
#define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX 0x016c 0x03f8 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0 0x016c 0x03f8 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA21__CSI_DATA13 0x016c 0x03f8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0 0x016c 0x03f8 0x0540 2 0
+#define MX6UL_PAD_LCD_DATA21__CSI_DATA13 0x016c 0x03f8 0x04f8 3 1
#define MX6UL_PAD_LCD_DATA21__EIM_DATA13 0x016c 0x03f8 0x0000 4 0
#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x016c 0x03f8 0x0000 5 0
#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29 0x016c 0x03f8 0x0000 6 0
#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x0170 0x03fc 0x0000 0 0
#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT 0x0170 0x03fc 0x0000 1 0
#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x0170 0x03fc 0x053c 2 0
-#define MX6UL_PAD_LCD_DATA22__CSI_DATA14 0x0170 0x03fc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA22__CSI_DATA14 0x0170 0x03fc 0x04fc 3 1
#define MX6UL_PAD_LCD_DATA22__EIM_DATA14 0x0170 0x03fc 0x0000 4 0
#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0x0170 0x03fc 0x0000 5 0
#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30 0x0170 0x03fc 0x0000 6 0
#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x0174 0x0400 0x0000 0 0
#define MX6UL_PAD_LCD_DATA23__MQS_LEFT 0x0174 0x0400 0x0000 1 0
#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x0174 0x0400 0x0538 2 0
-#define MX6UL_PAD_LCD_DATA23__CSI_DATA15 0x0174 0x0400 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA23__CSI_DATA15 0x0174 0x0400 0x0500 3 1
#define MX6UL_PAD_LCD_DATA23__EIM_DATA15 0x0174 0x0400 0x0000 4 0
#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0x0174 0x0400 0x0000 5 0
#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31 0x0174 0x0400 0x0000 6 0
#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0178 0x0404 0x0000 0 0
#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x0178 0x0404 0x0670 1 2
#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK 0x0178 0x0404 0x0000 2 0
-#define MX6UL_PAD_NAND_RE_B__KPP_ROW00 0x0178 0x0404 0x0000 3 0
+#define MX6UL_PAD_NAND_RE_B__KPP_ROW00 0x0178 0x0404 0x05d0 3 1
#define MX6UL_PAD_NAND_RE_B__EIM_EB_B00 0x0178 0x0404 0x0000 4 0
#define MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0178 0x0404 0x0000 5 0
#define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2 0x0178 0x0404 0x0000 8 0
#define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x017c 0x0408 0x0000 0 0
#define MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x017c 0x0408 0x0678 1 2
#define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B 0x017c 0x0408 0x0000 2 0
-#define MX6UL_PAD_NAND_WE_B__KPP_COL00 0x017c 0x0408 0x0000 3 0
+#define MX6UL_PAD_NAND_WE_B__KPP_COL00 0x017c 0x0408 0x05c4 3 1
#define MX6UL_PAD_NAND_WE_B__EIM_EB_B01 0x017c 0x0408 0x0000 4 0
#define MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x017c 0x0408 0x0000 5 0
#define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3 0x017c 0x0408 0x0000 8 0
#define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0180 0x040c 0x0000 0 0
#define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x0180 0x040c 0x067c 1 2
#define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B 0x0180 0x040c 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA00__KPP_ROW01 0x0180 0x040c 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA00__KPP_ROW01 0x0180 0x040c 0x05d4 3 1
#define MX6UL_PAD_NAND_DATA00__EIM_AD08 0x0180 0x040c 0x0000 4 0
#define MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x0180 0x040c 0x0000 5 0
#define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY 0x0180 0x040c 0x0000 8 0
#define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0184 0x0410 0x0000 0 0
#define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x0184 0x0410 0x0680 1 2
#define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS 0x0184 0x0410 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA01__KPP_COL01 0x0184 0x0410 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA01__KPP_COL01 0x0184 0x0410 0x05c8 3 1
#define MX6UL_PAD_NAND_DATA01__EIM_AD09 0x0184 0x0410 0x0000 4 0
#define MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x0184 0x0410 0x0000 5 0
#define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1 0x0184 0x0410 0x0000 8 0
#define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0188 0x0414 0x0000 0 0
#define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x0188 0x0414 0x0684 1 1
#define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00 0x0188 0x0414 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA02__KPP_ROW02 0x0188 0x0414 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA02__KPP_ROW02 0x0188 0x0414 0x05d8 3 1
#define MX6UL_PAD_NAND_DATA02__EIM_AD10 0x0188 0x0414 0x0000 4 0
#define MX6UL_PAD_NAND_DATA02__GPIO4_IO04 0x0188 0x0414 0x0000 5 0
#define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2 0x0188 0x0414 0x0000 8 0
#define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x018c 0x0418 0x0000 0 0
#define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x018c 0x0418 0x0688 1 2
#define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01 0x018c 0x0418 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA03__KPP_COL02 0x018c 0x0418 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA03__KPP_COL02 0x018c 0x0418 0x05cc 3 1
#define MX6UL_PAD_NAND_DATA03__EIM_AD11 0x018c 0x0418 0x0000 4 0
#define MX6UL_PAD_NAND_DATA03__GPIO4_IO05 0x018c 0x0418 0x0000 5 0
#define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3 0x018c 0x0418 0x0000 8 0
#define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x019c 0x0428 0x0000 0 0
#define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x019c 0x0428 0x0698 1 1
#define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B 0x019c 0x0428 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0 0x019c 0x0428 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0 0x019c 0x0428 0x0570 3 1
#define MX6UL_PAD_NAND_DATA07__EIM_AD15 0x019c 0x0428 0x0000 4 0
#define MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x019c 0x0428 0x0000 5 0
#define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x019c 0x0428 0x0628 8 5
#define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x01a8 0x0434 0x0000 0 0
#define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x01a8 0x0434 0x0000 1 0
#define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x01a8 0x0434 0x0000 2 0
-#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0 0x01a8 0x0434 0x0000 3 0
+#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0 0x01a8 0x0434 0x0560 3 1
#define MX6UL_PAD_NAND_READY_B__EIM_CS1_B 0x01a8 0x0434 0x0000 4 0
#define MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x01a8 0x0434 0x0000 5 0
#define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX 0x01a8 0x0434 0x0000 8 0
#define MX6UL_PAD_NAND_DQS__PWM5_OUT 0x01b8 0x0444 0x0000 3 0
#define MX6UL_PAD_NAND_DQS__EIM_WAIT 0x01b8 0x0444 0x0000 4 0
#define MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x01b8 0x0444 0x0000 5 0
-#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01 0x01b8 0x0444 0x0000 6 0
+#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01 0x01b8 0x0444 0x0614 6 1
#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK 0x01b8 0x0444 0x061c 8 1
#define MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x01bc 0x0448 0x0000 0 0
#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1 0x01bc 0x0448 0x0000 1 0
#define MX6UL_PAD_SD1_CMD__SPDIF_OUT 0x01bc 0x0448 0x0000 3 0
#define MX6UL_PAD_SD1_CMD__EIM_ADDR19 0x01bc 0x0448 0x0000 4 0
#define MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x01bc 0x0448 0x0000 5 0
-#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00 0x01bc 0x0448 0x0000 6 0
+#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00 0x01bc 0x0448 0x0610 6 2
#define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR 0x01bc 0x0448 0x0000 8 0
#define MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x01c0 0x044c 0x0000 0 0
#define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2 0x01c0 0x044c 0x0000 1 0
-#define MX6UL_PAD_SD1_CLK__SAI2_MCLK 0x01c0 0x044c 0x0000 2 0
+#define MX6UL_PAD_SD1_CLK__SAI2_MCLK 0x01c0 0x044c 0x05f0 2 1
#define MX6UL_PAD_SD1_CLK__SPDIF_IN 0x01c0 0x044c 0x0618 3 3
#define MX6UL_PAD_SD1_CLK__EIM_ADDR20 0x01c0 0x044c 0x0000 4 0
#define MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x01c0 0x044c 0x0000 5 0
#define MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x01e8 0x0474 0x04c8 0 0
#define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x01e8 0x0474 0x0680 1 0
#define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN 0x01e8 0x0474 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0 0x01e8 0x0474 0x0000 3 0
+#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0 0x01e8 0x0474 0x0550 3 0
#define MX6UL_PAD_CSI_DATA01__EIM_AD01 0x01e8 0x0474 0x0000 4 0
#define MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x01e8 0x0474 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x01e8 0x0474 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x01e8 0x0474 0x05e0 6 0
#define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x01e8 0x0474 0x0644 8 1
#define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX 0x01e8 0x0474 0x0000 8 0
#define MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x01ec 0x0478 0x04d8 0 1
#define MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x01f8 0x0484 0x04e0 0 1
#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5 0x01f8 0x0484 0x0690 1 2
#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0x01f8 0x0484 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0 0x01f8 0x0484 0x0000 3 0
+#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0 0x01f8 0x0484 0x0540 3 1
#define MX6UL_PAD_CSI_DATA05__EIM_AD05 0x01f8 0x0484 0x0000 4 0
#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x01f8 0x0484 0x0000 5 0
#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x01f8 0x0484 0x05e8 6 1
#define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x01fc 0x0488 0x053c 3 1
#define MX6UL_PAD_CSI_DATA06__EIM_AD06 0x01fc 0x0488 0x0000 4 0
#define MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x01fc 0x0488 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x01fc 0x0488 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x01fc 0x0488 0x05e4 6 1
#define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B 0x01fc 0x0488 0x0000 8 0
#define MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x0200 0x048c 0x04e8 0 1
#define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7 0x0200 0x048c 0x0698 1 2
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2015 Freescale Semiconductor, Inc.
#include <dt-bindings/clock/imx6ul-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "imx6ul-pinfunc.h"
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ */
+ chosen {};
+
aliases {
ethernet0 = &fec1;
ethernet1 = &fec2;
device_type = "cpu";
reg = <0>;
clock-latency = <61036>; /* two CLK32 periods */
+ #cooling-cells = <2>;
operating-points = <
/* kHz uV */
+ 696000 1275000
528000 1175000
396000 1025000
198000 950000
>;
fsl,soc-operating-points = <
/* KHz uV */
+ 696000 1275000
528000 1175000
396000 1175000
198000 1175000
<&clks IMX6UL_CA7_SECONDARY_SEL>,
<&clks IMX6UL_CLK_STEP>,
<&clks IMX6UL_CLK_PLL1_SW>,
- <&clks IMX6UL_CLK_PLL1_SYS>,
- <&clks IMX6UL_PLL1_BYPASS>,
- <&clks IMX6UL_CLK_PLL1>,
- <&clks IMX6UL_PLL1_BYPASS_SRC>,
- <&clks IMX6UL_CLK_OSC>;
+ <&clks IMX6UL_CLK_PLL1_SYS>;
clock-names = "arm", "pll2_bus", "pll2_pfd2_396m",
"secondary_sel", "step", "pll1_sw",
- "pll1_sys", "pll1_bypass", "pll1",
- "pll1_bypass_src", "osc";
+ "pll1_sys";
arm-supply = <®_arm>;
soc-supply = <®_soc>;
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
};
};
- intc: interrupt-controller@00a01000 {
- compatible = "arm,cortex-a7-gic";
+ intc: interrupt-controller@a01000 {
+ compatible = "arm,gic-400", "arm,cortex-a7-gic";
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
#interrupt-cells = <3>;
interrupt-controller;
+ interrupt-parent = <&intc>;
reg = <0x00a01000 0x1000>,
- <0x00a02000 0x1000>,
+ <0x00a02000 0x2000>,
<0x00a04000 0x2000>,
<0x00a06000 0x2000>;
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&intc>;
+ status = "disabled";
+ };
+
ckil: clock-cli {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ipp_di1";
};
+ tempmon: tempmon {
+ compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
+ interrupt-parent = <&gpc>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+ nvmem-cell-names = "calib", "temp_grade";
+ clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupt-parent = <&gpc>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&gpc>;
ranges;
- pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- ocram: sram@00900000 {
+ ocram: sram@900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
};
- dma_apbh: dma-apbh@01804000 {
+ dma_apbh: dma-apbh@1804000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x01804000 0x2000>;
interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
clocks = <&clks IMX6UL_CLK_APBHDMA>;
};
- gpmi: gpmi-nand@01806000 {
+ gpmi: gpmi-nand@1806000 {
compatible = "fsl,imx6q-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
- aips1: aips-bus@02000000 {
+ aips1: aips-bus@2000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
- spba-bus@02000000 {
+ spba-bus@2000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x40000>;
ranges;
- u-boot,dm-spl;
- ecspi1: ecspi@02008000 {
+ ecspi1: spi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@0200c000 {
+ ecspi2: spi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi3: ecspi@02010000 {
+ ecspi3: spi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi4: ecspi@02014000 {
+ ecspi4: spi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- uart7: serial@02018000 {
+ uart7: serial@2018000 {
compatible = "fsl,imx6ul-uart",
"fsl,imx6q-uart";
reg = <0x02018000 0x4000>;
status = "disabled";
};
- uart1: serial@02020000 {
+ uart1: serial@2020000 {
compatible = "fsl,imx6ul-uart",
"fsl,imx6q-uart";
reg = <0x02020000 0x4000>;
status = "disabled";
};
- uart8: serial@02024000 {
+ uart8: serial@2024000 {
compatible = "fsl,imx6ul-uart",
"fsl,imx6q-uart";
reg = <0x02024000 0x4000>;
status = "disabled";
};
- sai1: sai@02028000 {
+ sai1: sai@2028000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
reg = <0x02028000 0x4000>;
status = "disabled";
};
- sai2: sai@0202c000 {
+ sai2: sai@202c000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
reg = <0x0202c000 0x4000>;
status = "disabled";
};
- sai3: sai@02030000 {
+ sai3: sai@2030000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
reg = <0x02030000 0x4000>;
};
};
- tsc: tsc@02040000 {
+ tsc: tsc@2040000 {
compatible = "fsl,imx6ul-tsc";
reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
status = "disabled";
};
- pwm1: pwm@02080000 {
+ pwm1: pwm@2080000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_PWM1>,
<&clks IMX6UL_CLK_PWM1>;
clock-names = "ipg", "per";
status = "disabled";
};
- pwm2: pwm@02084000 {
+ pwm2: pwm@2084000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_PWM2>,
<&clks IMX6UL_CLK_PWM2>;
clock-names = "ipg", "per";
status = "disabled";
};
- pwm3: pwm@02088000 {
+ pwm3: pwm@2088000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_PWM3>,
<&clks IMX6UL_CLK_PWM3>;
clock-names = "ipg", "per";
status = "disabled";
};
- pwm4: pwm@0208c000 {
+ pwm4: pwm@208c000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_PWM4>,
<&clks IMX6UL_CLK_PWM4>;
clock-names = "ipg", "per";
status = "disabled";
};
- can1: flexcan@02090000 {
+ can1: flexcan@2090000 {
compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
reg = <0x02090000 0x4000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
<&clks IMX6UL_CLK_CAN1_SERIAL>;
clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
status = "disabled";
};
- can2: flexcan@02094000 {
+ can2: flexcan@2094000 {
compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
reg = <0x02094000 0x4000>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
<&clks IMX6UL_CLK_CAN2_SERIAL>;
clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
status = "disabled";
};
- gpt1: gpt@02098000 {
+ gpt1: gpt@2098000 {
compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
reg = <0x02098000 0x4000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "ipg", "per";
};
- gpio1: gpio@0209c000 {
+ gpio1: gpio@209c000 {
compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
reg = <0x0209c000 0x4000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
<&iomuxc 16 33 16>;
};
- gpio2: gpio@020a0000 {
+ gpio2: gpio@20a0000 {
compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
reg = <0x020a0000 0x4000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
};
- gpio3: gpio@020a4000 {
+ gpio3: gpio@20a4000 {
compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
reg = <0x020a4000 0x4000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_GPIO3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
gpio-ranges = <&iomuxc 0 65 29>;
};
- gpio4: gpio@020a8000 {
+ gpio4: gpio@20a8000 {
compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
reg = <0x020a8000 0x4000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_GPIO4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
};
- gpio5: gpio@020ac000 {
+ gpio5: gpio@20ac000 {
compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
reg = <0x020ac000 0x4000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_GPIO5>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
};
- fec2: ethernet@020b4000 {
+ fec2: ethernet@20b4000 {
compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
reg = <0x020b4000 0x4000>;
+ interrupt-names = "int0", "pps";
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_ENET>,
status = "disabled";
};
- kpp: kpp@020b8000 {
+ kpp: kpp@20b8000 {
compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- wdog1: wdog@020bc000 {
+ wdog1: wdog@20bc000 {
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_WDOG1>;
};
- wdog2: wdog@020c0000 {
+ wdog2: wdog@20c0000 {
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- clks: ccm@020c4000 {
+ clks: ccm@20c4000 {
compatible = "fsl,imx6ul-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
};
- anatop: anatop@020c8000 {
+ anatop: anatop@20c8000 {
compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
"syscon", "simple-bus";
reg = <0x020c8000 0x1000>;
};
};
- usbphy1: usbphy@020c9000 {
+ usbphy1: usbphy@20c9000 {
compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
fsl,anatop = <&anatop>;
};
- usbphy2: usbphy@020ca000 {
+ usbphy2: usbphy@20ca000 {
compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
fsl,anatop = <&anatop>;
};
- snvs: snvs@020cc000 {
+ snvs: snvs@20cc000 {
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x020cc000 0x4000>;
compatible = "syscon-poweroff";
regmap = <&snvs>;
offset = <0x38>;
+ value = <0x60>;
mask = <0x60>;
status = "disabled";
};
linux,keycode = <KEY_POWER>;
wakeup-source;
};
+
+ snvs_lpgpr: snvs-lpgpr {
+ compatible = "fsl,imx6ul-snvs-lpgpr";
+ };
};
- epit1: epit@020d0000 {
+ epit1: epit@20d0000 {
reg = <0x020d0000 0x4000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
};
- epit2: epit@020d4000 {
+ epit2: epit@20d4000 {
reg = <0x020d4000 0x4000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
};
- src: src@020d8000 {
+ src: src@20d8000 {
compatible = "fsl,imx6ul-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
#reset-cells = <1>;
};
- gpc: gpc@020dc000 {
+ gpc: gpc@20dc000 {
compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupt-controller;
interrupt-parent = <&intc>;
};
- iomuxc: iomuxc@020e0000 {
+ iomuxc: iomuxc@20e0000 {
compatible = "fsl,imx6ul-iomuxc";
reg = <0x020e0000 0x4000>;
};
- gpr: iomuxc-gpr@020e4000 {
+ gpr: iomuxc-gpr@20e4000 {
compatible = "fsl,imx6ul-iomuxc-gpr",
"fsl,imx6q-iomuxc-gpr", "syscon";
reg = <0x020e4000 0x4000>;
};
- gpt2: gpt@020e8000 {
+ gpt2: gpt@20e8000 {
compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
reg = <0x020e8000 0x4000>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "ipg", "per";
};
- sdma: sdma@020ec000 {
+ sdma: sdma@20ec000 {
compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
"fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_SDMA>,
+ clocks = <&clks IMX6UL_CLK_IPG>,
<&clks IMX6UL_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
};
- pwm5: pwm@020f0000 {
+ pwm5: pwm@20f0000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x020f0000 0x4000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- pwm6: pwm@020f4000 {
+ pwm6: pwm@20f4000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x020f4000 0x4000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- pwm7: pwm@020f8000 {
+ pwm7: pwm@20f8000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x020f8000 0x4000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- pwm8: pwm@020fc000 {
+ pwm8: pwm@20fc000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x020fc000 0x4000>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
};
};
- aips2: aips-bus@02100000 {
+ aips2: aips-bus@2100000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
- usbotg1: usb@02184000 {
+ crypto: caam@2140000 {
+ compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2140000 0x3c000>;
+ ranges = <0 0x2140000 0x3c000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_CAAM_IPG>, <&clks IMX6UL_CLK_CAAM_ACLK>,
+ <&clks IMX6UL_CLK_CAAM_MEM>;
+ clock-names = "ipg", "aclk", "mem";
+
+ sec_jr0: jr0@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr1@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr2@3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ usbotg1: usb@2184000 {
compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- usbotg2: usb@02184200 {
+ usbotg2: usb@2184200 {
compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- usbmisc: usbmisc@02184800 {
+ usbmisc: usbmisc@2184800 {
#index-cells = <1>;
compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
};
- fec1: ethernet@02188000 {
+ fec1: ethernet@2188000 {
compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
+ interrupt-names = "int0", "pps";
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_ENET>,
status = "disabled";
};
- usdhc1: usdhc@02190000 {
+ usdhc1: usdhc@2190000 {
compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- usdhc2: usdhc@02194000 {
+ usdhc2: usdhc@2194000 {
compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- adc1: adc@02198000 {
+ adc1: adc@2198000 {
compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
reg = <0x02198000 0x4000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- i2c1: i2c@021a0000 {
+ i2c1: i2c@21a0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
status = "disabled";
};
- i2c2: i2c@021a4000 {
+ i2c2: i2c@21a4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
status = "disabled";
};
- i2c3: i2c@021a8000 {
+ i2c3: i2c@21a8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
status = "disabled";
};
- mmdc: mmdc@021b0000 {
+ memory-controller@21b0000 {
compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
+ clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>;
+ };
+
+ weim: weim@21b8000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
+ reg = <0x021b8000 0x4000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_EIM>;
+ fsl,weim-cs-gpr = <&gpr>;
+ status = "disabled";
+ };
+
+ ocotp: ocotp-ctrl@21bc000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,imx6ul-ocotp", "syscon";
+ reg = <0x021bc000 0x4000>;
+ clocks = <&clks IMX6UL_CLK_OCOTP>;
+
+ tempmon_calib: calib@38 {
+ reg = <0x38 4>;
+ };
+
+ tempmon_temp_grade: temp-grade@20 {
+ reg = <0x20 4>;
+ };
+
+ cpu_speed_grade: speed-grade@10 {
+ reg = <0x10 4>;
+ };
};
- lcdif: lcdif@021c8000 {
+ lcdif: lcdif@21c8000 {
compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
reg = <0x021c8000 0x4000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- qspi: qspi@021e0000 {
+ qspi: spi@21e0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
status = "disabled";
};
- wdog3: wdog@021e4000 {
+ wdog3: wdog@21e4000 {
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
reg = <0x021e4000 0x4000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- uart2: serial@021e8000 {
+ uart2: serial@21e8000 {
compatible = "fsl,imx6ul-uart",
"fsl,imx6q-uart";
reg = <0x021e8000 0x4000>;
status = "disabled";
};
- uart3: serial@021ec000 {
+ uart3: serial@21ec000 {
compatible = "fsl,imx6ul-uart",
"fsl,imx6q-uart";
reg = <0x021ec000 0x4000>;
status = "disabled";
};
- uart4: serial@021f0000 {
+ uart4: serial@21f0000 {
compatible = "fsl,imx6ul-uart",
"fsl,imx6q-uart";
reg = <0x021f0000 0x4000>;
status = "disabled";
};
- uart5: serial@021f4000 {
+ uart5: serial@21f4000 {
compatible = "fsl,imx6ul-uart",
"fsl,imx6q-uart";
reg = <0x021f4000 0x4000>;
status = "disabled";
};
- i2c4: i2c@021f8000 {
+ i2c4: i2c@21f8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
status = "disabled";
};
- uart6: serial@021fc000 {
+ uart6: serial@21fc000 {
compatible = "fsl,imx6ul-uart",
"fsl,imx6q-uart";
reg = <0x021fc000 0x4000>;
-/*
- * Copyright (C) 2016 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2016 Freescale Semiconductor, Inc.
/dts-v1/;
#include "imx6ull.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
/ {
- model = "Freescale i.MX6 ULL 14x14 EVK Board";
+ model = "Freescale i.MX6 UltraLiteLite 14x14 EVK Board";
compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
-
- chosen {
- stdout-path = &uart1;
- };
-
- memory {
- reg = <0x80000000 0x20000000>;
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm1 0 5000000>;
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <6>;
- status = "okay";
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_can_3v3: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "can-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
- };
-
- reg_sd1_vmmc: regulator@1 {
- compatible = "regulator-fixed";
- regulator-name = "VSD_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_gpio_dvfs: regulator-gpio {
- compatible = "regulator-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_dvfs>;
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "gpio_dvfs";
- regulator-type = "voltage";
- gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
- states = <1300000 0x1 1400000 0x0>;
- };
- };
-
- spi5 {
- compatible = "spi-gpio";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_spi4>;
- status = "okay";
- gpio-sck = <&gpio5 11 0>;
- gpio-mosi = <&gpio5 10 0>;
- cs-gpios = <&gpio5 7 0>;
- num-chipselects = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpio_spi: gpio_spi@0 {
- compatible = "fairchild,74hc595";
- gpio-controller;
- oe-gpios = <&gpio5 8 0>;
- #gpio-cells = <2>;
- reg = <0>;
- registers-number = <1>;
- registers-default = /bits/ 8 <0x57>;
- spi-max-frequency = <100000>;
- };
- };
-};
-
-&cpu0 {
- arm-supply = <®_arm>;
- soc-supply = <®_soc>;
- dc-supply = <®_gpio_dvfs>;
};
&clks {
- assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
- assigned-clock-rates = <786432000>;
-};
-
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet1>;
- phy-mode = "rmii";
- phy-handle = <ðphy0>;
- status = "okay";
-};
-
-&fec2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet2>;
- phy-mode = "rmii";
- phy-handle = <ðphy1>;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@2 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <2>;
- };
-
- ethphy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
- };
-};
-
-&gpc {
- fsl,cpu_pupscr_sw2iso = <0x1>;
- fsl,cpu_pupscr_sw = <0x0>;
- fsl,cpu_pdnscr_iso2sw = <0x1>;
- fsl,cpu_pdnscr_iso = <0x1>;
- fsl,ldo-bypass = <0>; /* DCDC, ldo-enable */
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
-
- mag3110@0e {
- compatible = "fsl,mag3110";
- reg = <0x0e>;
- position = <2>;
- };
-
- fxls8471@1e {
- compatible = "fsl,fxls8471";
- reg = <0x1e>;
- position = <0>;
- interrupt-parent = <&gpio5>;
- interrupts = <0 8>;
- };
-};
-
-&i2c2 {
- clock_frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog_1>;
- imx6ul-evk {
- pinctrl_hog_1: hoggrp-1 {
- fsl,pins = <
- MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */
- MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */
- MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */
- >;
- };
-
- pinctrl_csi1: csi1grp {
- fsl,pins = <
- MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
- MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
- MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
- MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088
- MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088
- MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088
- MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088
- MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088
- MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088
- MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088
- MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088
- MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088
- >;
- };
-
- pinctrl_enet1: enet1grp {
- fsl,pins = <
- MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
- MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
- MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
- MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
- MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
- MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
- MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
- MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
- >;
- };
-
- pinctrl_enet2: enet2grp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
- MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
- MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
- MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
- MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
- MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
- MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
- MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
- MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
- MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
- >;
- };
-
- pinctrl_flexcan1: flexcan1grp{
- fsl,pins = <
- MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
- MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
- >;
- };
-
- pinctrl_flexcan2: flexcan2grp{
- fsl,pins = <
- MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
- MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
- MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
- >;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
- MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
- >;
- };
-
- pinctrl_lcdif_dat: lcdifdatgrp {
- fsl,pins = <
- MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
- MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
- MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
- MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
- MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
- MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
- MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
- MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
- MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
- MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
- MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
- MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
- MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
- MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
- MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
- MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
- MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
- MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
- MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79
- MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79
- MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79
- MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79
- MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79
- MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79
- >;
- };
-
- pinctrl_lcdif_ctrl: lcdifctrlgrp {
- fsl,pins = <
- MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
- MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
- MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
- MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
- >;
- };
-
- pinctrl_pwm1: pwm1grp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0
- >;
- };
-
- pinctrl_qspi: qspigrp {
- fsl,pins = <
- MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1
- MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
- MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1
- MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1
- MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1
- MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
- MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
- MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
- MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1
- MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1
- >;
- };
-
- pinctrl_uart2dte: uart2dtegrp {
- fsl,pins = <
- MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1
- MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1
- MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS 0x1b0b1
- MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS 0x1b0b1
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069
- MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
- MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
- MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
- MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
- MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
- >;
- };
-
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
- >;
- };
- };
-};
-
-&iomuxc_snvs {
- pinctrl-names = "default_snvs";
- pinctrl-0 = <&pinctrl_hog_2>;
- imx6ul-evk {
- pinctrl_hog_2: hoggrp-2 {
- fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x80000000
- >;
- };
-
- pinctrl_dvfs: dvfsgrp {
- fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x79
- >;
- };
-
- pinctrl_lcdif_reset: lcdifresetgrp {
- fsl,pins = <
- /* used for lcd reset */
- MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79
- >;
- };
-
- pinctrl_spi4: spi4grp {
- fsl,pins = <
- MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1
- MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1
- MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1
- MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000
- >;
- };
-
- pinctrl_sai2_hp_det_b: sai2_hp_det_grp {
- fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059
- >;
- };
- };
-};
-
-
-&lcdif {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcdif_dat
- &pinctrl_lcdif_ctrl
- &pinctrl_lcdif_reset>;
- display = <&display0>;
- status = "okay";
-
- display0: display {
- bits-per-pixel = <16>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <9200000>;
- hactive = <480>;
- vactive = <272>;
- hfront-porch = <8>;
- hback-porch = <4>;
- hsync-len = <41>;
- vback-porch = <2>;
- vfront-porch = <4>;
- vsync-len = <10>;
-
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
-};
-
-&pwm1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1>;
- status = "okay";
-};
-
-&qspi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_qspi>;
- status = "okay";
- ddrsmp=<0>;
-
- flash0: n25q256a@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- /* compatible = "micron,n25q256a"; */
- compatible = "jedec,spi-nor";
- spi-max-frequency = <29000000>;
- spi-nor,ddr-quad-read-dummy = <6>;
- reg = <0>;
- };
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- fsl,uart-has-rtscts;
- /* for DTE mode, add below change */
- /* fsl,dte-mode; */
- /* pinctrl-0 = <&pinctrl_uart2dte>; */
- status = "okay";
-};
-
-&usbotg1 {
- dr_mode = "otg";
- srp-disable;
- hnp-disable;
- adp-disable;
- status = "okay";
-};
-
-&usbotg2 {
- dr_mode = "host";
- disable-over-current;
- status = "okay";
-};
-
-&usbphy1 {
- tx-d-cal = <0x5>;
-};
-
-&usbphy2 {
- tx-d-cal = <0x5>;
-};
-
-&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1>;
- cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
- keep-power-in-suspend;
- enable-sdio-wakeup;
- vmmc-supply = <®_sd1_vmmc>;
- status = "okay";
-};
-
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- no-1-8-v;
- non-removable;
- keep-power-in-suspend;
- enable-sdio-wakeup;
- status = "okay";
-};
-
-&wdog1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdog>;
- fsl,wdog_b;
+ assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
+ assigned-clock-rates = <320000000>;
};
+/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2016 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2017 NXP
*/
#ifndef __DTS_IMX6ULL_PINFUNC_SNVS_H
#define MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x002C 0x0070 0x0000 0x5 0x0
#endif /* __DTS_IMX6ULL_PINFUNC_SNVS_H */
-
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2016 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __DTS_IMX6ULL_PINFUNC_H
* The pin function ID is a tuple of
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
-#define MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x0068 0x02f4 0x0000 0x3 0x0
+/* signals common for i.MX6UL and i.MX6ULL */
+#undef MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6
+#undef MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7
+#undef MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5
+#undef MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6
+#undef MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7
-#define MX6UL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0
-#define MX6UL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0
-#define MX6UL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0
-#define MX6UL_PAD_ENET2_TX_DATA0__EPDC_SDDO11 0x00F0 0x037C 0x0000 0x9 0x0
-#define MX6UL_PAD_ENET2_TX_DATA1__EPDC_SDDO12 0x00F4 0x0380 0x0000 0x9 0x0
-#define MX6UL_PAD_ENET2_TX_EN__EPDC_SDDO13 0x00F8 0x0384 0x0000 0x9 0x0
-#define MX6UL_PAD_ENET2_TX_CLK__EPDC_SDDO14 0x00FC 0x0388 0x0000 0x9 0x0
-#define MX6UL_PAD_ENET2_RX_ER__EPDC_SDDO15 0x0100 0x038C 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_CLK__EPDC_SDCLK 0x0104 0x0390 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_ENABLE__EPDC_SDLE 0x0108 0x0394 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_HSYNC__EPDC_SDOE 0x010C 0x0398 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_VSYNC__EPDC_SDCE0 0x0110 0x039C 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_RESET__EPDC_GDOE 0x0114 0x03A0 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_DATA00__EPDC_SDDO00 0x0118 0x03A4 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_DATA01__EPDC_SDDO01 0x011C 0x03A8 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_DATA02__EPDC_SDDO02 0x0120 0x03AC 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_DATA03__EPDC_SDDO03 0x0124 0x03B0 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_DATA04__EPDC_SDDO04 0x0128 0x03B4 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_DATA05__EPDC_SDDO05 0x012C 0x03B8 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_DATA06__EPDC_SDDO06 0x0130 0x03BC 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_DATA07__EPDC_SDDO07 0x0134 0x03C0 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_DATA14__EPDC_SDSHR 0x0150 0x03DC 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_DATA15__EPDC_GDRL 0x0154 0x03E0 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_DATA16__EPDC_GDCLK 0x0158 0x03E4 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_DATA17__EPDC_GDSP 0x015C 0x03E8 0x0000 0x9 0x0
-#define MX6UL_PAD_LCD_DATA21__EPDC_SDCE1 0x016C 0x03F8 0x0000 0x9 0x0
-
-#define MX6UL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4 0x0460 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8 0x0464 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC 0x0468 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_HSYNC__ESAI_TX1 0x01E0 0x046C 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0
-#define MX6UL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0
+/* signals for i.MX6ULL only */
+#define MX6ULL_PAD_UART1_TX_DATA__UART5_DCE_TX 0x0084 0x0310 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX 0x0084 0x0310 0x0644 0x9 0x4
+#define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX 0x0088 0x0314 0x0644 0x9 0x5
+#define MX6ULL_PAD_UART1_RX_DATA__UART5_DTE_TX 0x0088 0x0314 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_CTS 0x008C 0x0318 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DTE_RTS 0x008C 0x0318 0x0640 0x9 0x3
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DCE_RTS 0x0090 0x031C 0x0640 0x9 0x4
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_CTS 0x0090 0x031C 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART4_RX_DATA__EPDC_PWRCTRL01 0x00B8 0x0344 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_TX_DATA__EPDC_PWRCTRL02 0x00BC 0x0348 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_RX_DATA__EPDC_PWRCTRL03 0x00C0 0x034C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_DATA0__EPDC_SDCE04 0x00C4 0x0350 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_DATA1__EPDC_SDCE05 0x00C8 0x0354 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_EN__EPDC_SDCE06 0x00CC 0x0358 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_DATA0__EPDC_SDCE07 0x00D0 0x035C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_DATA1__EPDC_SDCE08 0x00D4 0x0360 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_EN__EPDC_SDCE09 0x00D8 0x0364 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_CLK__EPDC_SDOED 0x00DC 0x0368 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_ER__EPDC_SDOEZ 0x00E0 0x036C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_DATA0__EPDC_SDDO11 0x00F0 0x037C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_DATA1__EPDC_SDDO12 0x00F4 0x0380 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_EN__EPDC_SDDO13 0x00F8 0x0384 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_CLK__EPDC_SDDO14 0x00FC 0x0388 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_ER__EPDC_SDDO15 0x0100 0x038C 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_CLK__EPDC_SDCLK 0x0104 0x0390 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_ENABLE__EPDC_SDLE 0x0108 0x0394 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_HSYNC__EPDC_SDOE 0x010C 0x0398 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_VSYNC__EPDC_SDCE0 0x0110 0x039C 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_RESET__EPDC_GDOE 0x0114 0x03A0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA00__EPDC_SDDO00 0x0118 0x03A4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA01__EPDC_SDDO01 0x011C 0x03A8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA02__EPDC_SDDO02 0x0120 0x03AC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA03__EPDC_SDDO03 0x0124 0x03B0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA04__EPDC_SDDO04 0x0128 0x03B4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA05__EPDC_SDDO05 0x012C 0x03B8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA06__EPDC_SDDO06 0x0130 0x03BC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA07__EPDC_SDDO07 0x0134 0x03C0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA14__EPDC_SDSHR 0x0150 0x03DC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA15__EPDC_GDRL 0x0154 0x03E0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK 0x0158 0x03E4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP 0x015C 0x03E8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1 0x016C 0x03F8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA22__EPDC_SDCE02 0x0170 0x03FC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA23__EPDC_SDCE03 0x0174 0x0400 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4 0x0460 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8 0x0464 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC 0x0468 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_HSYNC__ESAI_TX1 0x01E0 0x046C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0
#endif /* __DTS_IMX6ULL_PINFUNC_H */
-/*
- * Copyright 2015-2016 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
-#include <dt-bindings/clock/imx6ul-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6ul.dtsi"
#include "imx6ull-pinfunc.h"
#include "imx6ull-pinfunc-snvs.h"
-#include "skeleton.dtsi"
-/ {
- aliases {
- can0 = &flexcan1;
- can1 = &flexcan2;
- ethernet0 = &fec1;
- ethernet1 = &fec2;
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- gpio4 = &gpio5;
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- i2c2 = &i2c3;
- i2c3 = &i2c4;
- mmc0 = &usdhc1;
- mmc1 = &usdhc2;
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
- serial5 = &uart6;
- serial6 = &uart7;
- serial7 = &uart8;
- spi0 = &qspi;
- spi1 = &ecspi1;
- spi2 = &ecspi2;
- spi3 = &ecspi3;
- spi4 = &ecspi4;
- usbphy0 = &usbphy1;
- usbphy1 = &usbphy2;
- usb0 = &usbotg1;
- usb1 = &usbotg2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- compatible = "arm,cortex-a7";
- device_type = "cpu";
- reg = <0>;
- clock-latency = <61036>; /* two CLK32 periods */
- operating-points = <
- /* kHz uV */
- 528000 1175000
- 99000 950000
- >;
- fsl,soc-operating-points = <
- /* KHz uV */
- 528000 1175000
- 99000 1175000
- >;
- clocks = <&clks IMX6UL_CLK_ARM>,
- <&clks IMX6UL_CLK_PLL2_BUS>,
- <&clks IMX6UL_CLK_PLL2_PFD2>,
- <&clks IMX6UL_CA7_SECONDARY_SEL>,
- <&clks IMX6UL_CLK_STEP>,
- <&clks IMX6UL_CLK_PLL1_SW>,
- <&clks IMX6UL_CLK_PLL1_SYS>,
- <&clks IMX6UL_PLL1_BYPASS>,
- <&clks IMX6UL_CLK_PLL1>,
- <&clks IMX6UL_PLL1_BYPASS_SRC>,
- <&clks IMX6UL_CLK_OSC>;
- clock-names = "arm", "pll2_bus", "pll2_pfd2_396m", "secondary_sel", "step",
- "pll1_sw", "pll1_sys", "pll1_bypass", "pll1", "pll1_bypass_src", "osc";
- };
- };
-
- intc: interrupt-controller@00a01000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x00a01000 0x1000>,
- <0x00a02000 0x100>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ckil: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "ckil";
- };
+/* Delete UART8 in AIPS-1 (i.MX6UL specific) */
+/delete-node/ &uart8;
+/* Delete CAAM node in AIPS-2 (i.MX6UL specific) */
+/delete-node/ &crypto;
+
+&cpu0 {
+ operating-points = <
+ /* kHz uV */
+ 900000 1275000
+ 792000 1225000
+ 528000 1175000
+ 396000 1025000
+ 198000 950000
+ >;
+ fsl,soc-operating-points = <
+ /* KHz uV */
+ 900000 1250000
+ 792000 1175000
+ 528000 1175000
+ 396000 1175000
+ 198000 1175000
+ >;
+};
- osc: clock@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "osc";
- };
+&ocotp {
+ compatible = "fsl,imx6ull-ocotp", "syscon";
+};
- ipp_di0: clock@2 {
- compatible = "fixed-clock";
- reg = <2>;
- #clock-cells = <0>;
- clock-frequency = <0>;
- clock-output-names = "ipp_di0";
- };
+&usdhc1 {
+ compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
+};
- ipp_di1: clock@3 {
- compatible = "fixed-clock";
- reg = <3>;
- #clock-cells = <0>;
- clock-frequency = <0>;
- clock-output-names = "ipp_di1";
- };
- };
+&usdhc2 {
+ compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
+};
+/ {
soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&gpc>;
- ranges;
-
- busfreq {
- compatible = "fsl,imx_busfreq";
- clocks = <&clks IMX6UL_CLK_PLL2_PFD2>, <&clks IMX6UL_CLK_PLL2_198M>,
- <&clks IMX6UL_CLK_PLL2_BUS>, <&clks IMX6UL_CLK_ARM>,
- <&clks IMX6UL_CLK_PLL3_USB_OTG>, <&clks IMX6UL_CLK_PERIPH>,
- <&clks IMX6UL_CLK_PERIPH_PRE>, <&clks IMX6UL_CLK_PERIPH_CLK2>,
- <&clks IMX6UL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6UL_CLK_OSC>,
- <&clks IMX6UL_CLK_AHB>, <&clks IMX6UL_CLK_AXI>,
- <&clks IMX6UL_CLK_PERIPH2>, <&clks IMX6UL_CLK_PERIPH2_PRE>,
- <&clks IMX6UL_CLK_PERIPH2_CLK2>, <&clks IMX6UL_CLK_PERIPH2_CLK2_SEL>,
- <&clks IMX6UL_CLK_STEP>, <&clks IMX6UL_CLK_MMDC_P0_FAST>, <&clks IMX6UL_PLL1_BYPASS_SRC>,
- <&clks IMX6UL_PLL1_BYPASS>, <&clks IMX6UL_CLK_PLL1_SYS>, <&clks IMX6UL_CLK_PLL1_SW>,
- <&clks IMX6UL_CLK_PLL1>;
- clock-names = "pll2_pfd2_396m", "pll2_198m", "pll2_bus", "arm", "pll3_usb_otg",
- "periph", "periph_pre", "periph_clk2", "periph_clk2_sel", "osc",
- "ahb", "ocram", "periph2", "periph2_pre", "periph2_clk2", "periph2_clk2_sel",
- "step", "mmdc", "pll1_bypass_src", "pll1_bypass", "pll1_sys", "pll1_sw", "pll1";
- fsl,max_ddr_freq = <400000000>;
- };
-
- pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- ocrams: sram@00900000 {
- compatible = "fsl,lpm-sram";
- reg = <0x00900000 0x4000>;
- };
-
- ocrams_ddr: sram@00904000 {
- compatible = "fsl,ddr-lpm-sram";
- reg = <0x00904000 0x1000>;
- };
-
- ocram: sram@00905000 {
- compatible = "mmio-sram";
- reg = <0x00905000 0x1B000>;
- };
-
- dma_apbh: dma-apbh@01804000 {
- compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh";
- reg = <0x01804000 0x2000>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
- #dma-cells = <1>;
- dma-channels = <4>;
- clocks = <&clks IMX6UL_CLK_APBHDMA>;
- };
-
- gpmi: gpmi-nand@01806000{
- compatible = "fsl,imx6q-gpmi-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
- reg-names = "gpmi-nand", "bch";
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "bch";
- clocks = <&clks IMX6UL_CLK_GPMI_IO>,
- <&clks IMX6UL_CLK_GPMI_APB>,
- <&clks IMX6UL_CLK_GPMI_BCH>,
- <&clks IMX6UL_CLK_GPMI_BCH_APB>,
- <&clks IMX6UL_CLK_PER_BCH>;
- clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
- "gpmi_bch_apb", "per1_bch";
- dmas = <&dma_apbh 0>;
- dma-names = "rx-tx";
- status = "disabled";
- };
-
- aips1: aips-bus@02000000 {
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02000000 0x100000>;
- ranges;
-
- spba-bus@02000000 {
- compatible = "fsl,spba-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02000000 0x40000>;
- ranges;
-
- spdif: spdif@02004000 {
- compatible = "fsl,imx6ul-spdif", "fsl,imx35-spdif";
- reg = <0x02004000 0x4000>;
- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&sdma 41 18 0>,
- <&sdma 42 18 0>;
- dma-names = "rx", "tx";
- clocks = <&clks IMX6UL_CLK_SPDIF_GCLK>,
- <&clks IMX6UL_CLK_OSC>,
- <&clks IMX6UL_CLK_SPDIF>,
- <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_IPG>,
- <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_SPBA>;
- clock-names = "core", "rxtx0",
- "rxtx1", "rxtx2",
- "rxtx3", "rxtx4",
- "rxtx5", "rxtx6",
- "rxtx7", "dma";
- status = "disabled";
- };
-
- ecspi1: ecspi@02008000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
- reg = <0x02008000 0x4000>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ECSPI1>,
- <&clks IMX6UL_CLK_ECSPI1>;
- clock-names = "ipg", "per";
- dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- ecspi2: ecspi@0200c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
- reg = <0x0200c000 0x4000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ECSPI2>,
- <&clks IMX6UL_CLK_ECSPI2>;
- clock-names = "ipg", "per";
- dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- ecspi3: ecspi@02010000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
- reg = <0x02010000 0x4000>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ECSPI3>,
- <&clks IMX6UL_CLK_ECSPI3>;
- clock-names = "ipg", "per";
- dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- ecspi4: ecspi@02014000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
- reg = <0x02014000 0x4000>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ECSPI4>,
- <&clks IMX6UL_CLK_ECSPI4>;
- clock-names = "ipg", "per";
- dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart7: serial@02018000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x02018000 0x4000>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART7_IPG>,
- <&clks IMX6UL_CLK_UART7_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 43 4 0>, <&sdma 44 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart1: serial@02020000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x02020000 0x4000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART1_IPG>,
- <&clks IMX6UL_CLK_UART1_SERIAL>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- esai: esai@02024000 {
- compatible = "fsl,imx6ull-esai";
- reg = <0x02024000 0x4000>;
- interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ESAI_IPG>,
- <&clks IMX6UL_CLK_ESAI_MEM>,
- <&clks IMX6UL_CLK_ESAI_EXTAL>,
- <&clks IMX6UL_CLK_ESAI_IPG>,
- <&clks IMX6UL_CLK_SPBA>;
- clock-names = "core", "mem", "extal",
- "fsys", "dma";
- dmas = <&sdma 0 21 0>, <&sdma 47 21 0>;
- dma-names = "rx", "tx";
- dma-source = <&gpr 0 14 0 15>;
- status = "disabled";
- };
-
- sai1: sai@02028000 {
- compatible = "fsl,imx6ul-sai",
- "fsl,imx6sx-sai";
- reg = <0x02028000 0x4000>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
- <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_SAI1>,
- <&clks 0>, <&clks 0>;
- clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- dma-names = "rx", "tx";
- dmas = <&sdma 35 24 0>, <&sdma 36 24 0>;
- status = "disabled";
- };
-
- sai2: sai@0202c000 {
- compatible = "fsl,imx6ul-sai",
- "fsl,imx6sx-sai";
- reg = <0x0202c000 0x4000>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
- <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_SAI2>,
- <&clks 0>, <&clks 0>;
- clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- dma-names = "rx", "tx";
- dmas = <&sdma 37 24 0>, <&sdma 38 24 0>;
- status = "disabled";
- };
-
- sai3: sai@02030000 {
- compatible = "fsl,imx6ul-sai",
- "fsl,imx6sx-sai";
- reg = <0x02030000 0x4000>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
- <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_SAI3>,
- <&clks 0>, <&clks 0>;
- clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
- dma-names = "rx", "tx";
- dmas = <&sdma 39 24 0>, <&sdma 40 24 0>;
- status = "disabled";
- };
-
- asrc: asrc@02034000 {
- compatible = "fsl,imx53-asrc";
- reg = <0x02034000 0x4000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ASRC_IPG>,
- <&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>,
- <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
- <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
- <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
- <&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>,
- <&clks IMX6UL_CLK_SPBA>;
- clock-names = "mem", "ipg", "asrck_0",
- "asrck_1", "asrck_2", "asrck_3", "asrck_4",
- "asrck_5", "asrck_6", "asrck_7", "asrck_8",
- "asrck_9", "asrck_a", "asrck_b", "asrck_c",
- "asrck_d", "asrck_e", "asrck_f", "dma";
- dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
- <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
- dma-names = "rxa", "rxb", "rxc",
- "txa", "txb", "txc";
- fsl,asrc-rate = <48000>;
- fsl,asrc-width = <16>;
- status = "okay";
- };
- };
-
- tsc: tsc@02040000 {
- compatible = "fsl,imx6ul-tsc";
- reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_IPG>,
- <&clks IMX6UL_CLK_ADC2>;
- clock-names = "tsc", "adc";
- status = "disabled";
- };
-
- pwm1: pwm@02080000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x02080000 0x4000>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_PWM1>,
- <&clks IMX6UL_CLK_PWM1>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm2: pwm@02084000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x02084000 0x4000>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm3: pwm@02088000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x02088000 0x4000>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_PWM3>,
- <&clks IMX6UL_CLK_PWM3>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm4: pwm@0208c000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x0208c000 0x4000>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- flexcan1: can@02090000 {
- compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
- reg = <0x02090000 0x4000>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
- <&clks IMX6UL_CLK_CAN1_SERIAL>;
- clock-names = "ipg", "per";
- stop-mode = <&gpr 0x10 1 0x10 17>;
- status = "disabled";
- };
-
- flexcan2: can@02094000 {
- compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
- reg = <0x02094000 0x4000>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
- <&clks IMX6UL_CLK_CAN2_SERIAL>;
- clock-names = "ipg", "per";
- stop-mode = <&gpr 0x10 2 0x10 18>;
- status = "disabled";
- };
-
- gpt1: gpt@02098000 {
- compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt";
- reg = <0x02098000 0x4000>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
- <&clks IMX6UL_CLK_GPT1_SERIAL>;
- clock-names = "ipg", "per";
- };
-
- gpio1: gpio@0209c000 {
- compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
- reg = <0x0209c000 0x4000>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@020a0000 {
- compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
- reg = <0x020a0000 0x4000>;
- interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@020a4000 {
- compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
- reg = <0x020a4000 0x4000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio4: gpio@020a8000 {
- compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
- reg = <0x020a8000 0x4000>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio5: gpio@020ac000 {
- compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
- reg = <0x020ac000 0x4000>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- snvslp: snvs@020b0000 {
- compatible = "fsl,imx6ul-snvs";
- reg = <0x020b0000 0x4000>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- fec2: ethernet@020b4000 {
- compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
- reg = <0x020b4000 0x4000>;
- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ENET>,
- <&clks IMX6UL_CLK_ENET_AHB>,
- <&clks IMX6UL_CLK_ENET_PTP>,
- <&clks IMX6UL_CLK_ENET2_REF_125M>,
- <&clks IMX6UL_CLK_ENET2_REF_125M>;
- clock-names = "ipg", "ahb", "ptp",
- "enet_clk_ref", "enet_out";
- stop-mode = <&gpr 0x10 4>;
- fsl,num-tx-queues=<1>;
- fsl,num-rx-queues=<1>;
- fsl,magic-packet;
- fsl,wakeup_irq = <0>;
- status = "disabled";
- };
-
- kpp: kpp@020b8000 {
- compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
- reg = <0x020b8000 0x4000>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>;
- status = "disabled";
- };
-
- wdog1: wdog@020bc000 {
- compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
- reg = <0x020bc000 0x4000>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_WDOG1>;
- };
-
- wdog2: wdog@020c0000 {
- compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
- reg = <0x020c0000 0x4000>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_WDOG2>;
- status = "disabled";
- };
-
- clks: ccm@020c4000 {
- compatible = "fsl,imx6ul-ccm";
- reg = <0x020c4000 0x4000>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
- #clock-cells = <1>;
- clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
- clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
- };
-
- anatop: anatop@020c8000 {
- compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
- "syscon", "simple-bus";
- reg = <0x020c8000 0x1000>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-
- reg_3p0: regulator-3p0@120 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vdd3p0";
- regulator-min-microvolt = <2625000>;
- regulator-max-microvolt = <3400000>;
- anatop-reg-offset = <0x120>;
- anatop-vol-bit-shift = <8>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <0>;
- anatop-min-voltage = <2625000>;
- anatop-max-voltage = <3400000>;
- anatop-enable-bit = <0>;
- };
-
- reg_arm: regulator-vddcore@140 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "cpu";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1450000>;
- regulator-always-on;
- anatop-reg-offset = <0x140>;
- anatop-vol-bit-shift = <0>;
- anatop-vol-bit-width = <5>;
- anatop-delay-reg-offset = <0x170>;
- anatop-delay-bit-shift = <24>;
- anatop-delay-bit-width = <2>;
- anatop-min-bit-val = <1>;
- anatop-min-voltage = <725000>;
- anatop-max-voltage = <1450000>;
- };
-
- reg_soc: regulator-vddsoc@140 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vddsoc";
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1450000>;
- regulator-always-on;
- anatop-reg-offset = <0x140>;
- anatop-vol-bit-shift = <18>;
- anatop-vol-bit-width = <5>;
- anatop-delay-reg-offset = <0x170>;
- anatop-delay-bit-shift = <28>;
- anatop-delay-bit-width = <2>;
- anatop-min-bit-val = <1>;
- anatop-min-voltage = <725000>;
- anatop-max-voltage = <1450000>;
- };
- };
-
- usbphy1: usbphy@020c9000 {
- compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
- reg = <0x020c9000 0x1000>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USBPHY1>;
- phy-3p0-supply = <®_3p0>;
- fsl,anatop = <&anatop>;
- };
-
- usbphy2: usbphy@020ca000 {
- compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
- reg = <0x020ca000 0x1000>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USBPHY2>;
- phy-3p0-supply = <®_3p0>;
- fsl,anatop = <&anatop>;
- };
-
- tempmon: tempmon {
- compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- fsl,tempmon = <&anatop>;
- fsl,tempmon-data = <&ocotp>;
- clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
- };
-
- snvs: snvs@020cc000 {
- compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
- reg = <0x020cc000 0x4000>;
-
- snvs_rtc: snvs-rtc-lp {
- compatible = "fsl,sec-v4.0-mon-rtc-lp";
- regmap = <&snvs>;
- offset = <0x34>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- snvs_poweroff: snvs-poweroff {
- compatible = "syscon-poweroff";
- regmap = <&snvs>;
- offset = <0x38>;
- mask = <0x61>;
- };
-
- snvs_pwrkey: snvs-powerkey {
- compatible = "fsl,sec-v4.0-pwrkey";
- regmap = <&snvs>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- linux,keycode = <KEY_POWER>;
- wakeup;
- };
- };
-
- epit1: epit@020d0000 {
- reg = <0x020d0000 0x4000>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- epit2: epit@020d4000 {
- reg = <0x020d4000 0x4000>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- src: src@020d8000 {
- compatible = "fsl,imx6ul-src", "fsl,imx51-src";
- reg = <0x020d8000 0x4000>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- #reset-cells = <1>;
- };
-
- gpc: gpc@020dc000 {
- compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
- reg = <0x020dc000 0x4000>;
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&intc>;
- fsl,mf-mix-wakeup-irq = <0xfc00000 0x7d00 0x0 0x1400640>;
- };
-
- iomuxc: iomuxc@020e0000 {
- compatible = "fsl,imx6ul-iomuxc";
- reg = <0x020e0000 0x4000>;
- };
-
- gpr: iomuxc-gpr@020e4000 {
- compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
- reg = <0x020e4000 0x4000>;
- };
-
- mqs: mqs {
- compatible = "fsl,imx6sx-mqs";
- gpr = <&gpr>;
- status = "disabled";
- };
-
- gpt2: gpt@020e8000 {
- compatible = "fsl,imx6ul-gpt", "fsl,imx31-gpt";
- reg = <0x020e8000 0x4000>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- };
-
- sdma: sdma@020ec000 {
- compatible = "fsl,imx6ul-sdma", "fsl,imx35-sdma";
- reg = <0x020ec000 0x4000>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_SDMA>,
- <&clks IMX6UL_CLK_SDMA>;
- clock-names = "ipg", "ahb";
- #dma-cells = <3>;
- iram = <&ocram>;
- fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
- };
-
- pwm5: pwm@020f0000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x020f0000 0x4000>;
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm6: pwm@020f4000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x020f4000 0x4000>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm7: pwm@020f8000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x020f8000 0x4000>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
-
- pwm8: pwm@020fc000 {
- compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
- reg = <0x020fc000 0x4000>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- };
- };
-
- aips2: aips-bus@02100000 {
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x02100000 0x100000>;
- ranges;
-
- usbotg1: usb@02184000 {
- compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
- reg = <0x02184000 0x200>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USBOH3>;
- fsl,usbphy = <&usbphy1>;
- fsl,usbmisc = <&usbmisc 0>;
- fsl,anatop = <&anatop>;
- ahb-burst-config = <0x0>;
- tx-burst-size-dword = <0x10>;
- rx-burst-size-dword = <0x10>;
- status = "disabled";
- };
-
- usbotg2: usb@02184200 {
- compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
- reg = <0x02184200 0x200>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USBOH3>;
- fsl,usbphy = <&usbphy2>;
- fsl,usbmisc = <&usbmisc 1>;
- ahb-burst-config = <0x0>;
- tx-burst-size-dword = <0x10>;
- rx-burst-size-dword = <0x10>;
- status = "disabled";
- };
-
- usbmisc: usbmisc@02184800 {
- #index-cells = <1>;
- compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
- reg = <0x02184800 0x200>;
- };
-
- fec1: ethernet@02188000 {
- compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
- reg = <0x02188000 0x4000>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ENET>,
- <&clks IMX6UL_CLK_ENET_AHB>,
- <&clks IMX6UL_CLK_ENET_PTP>,
- <&clks IMX6UL_CLK_ENET_REF>,
- <&clks IMX6UL_CLK_ENET_REF>;
- clock-names = "ipg", "ahb", "ptp",
- "enet_clk_ref", "enet_out";
- stop-mode = <&gpr 0x10 3>;
- fsl,num-tx-queues=<1>;
- fsl,num-rx-queues=<1>;
- fsl,magic-packet;
- fsl,wakeup_irq = <0>;
- status = "disabled";
- };
-
- usdhc1: usdhc@02190000 {
- compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
- reg = <0x02190000 0x4000>;
- interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USDHC1>,
- <&clks IMX6UL_CLK_USDHC1>,
- <&clks IMX6UL_CLK_USDHC1>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- fsl,tuning-step= <2>;
- status = "disabled";
- };
-
- usdhc2: usdhc@02194000 {
- compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
- reg = <0x02194000 0x4000>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_USDHC2>,
- <&clks IMX6UL_CLK_USDHC2>,
- <&clks IMX6UL_CLK_USDHC2>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- fsl,tuning-step= <2>;
- status = "disabled";
- };
-
- adc1: adc@02198000 {
- compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
- reg = <0x02198000 0x4000>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_ADC1>;
- num-channels = <2>;
- clock-names = "adc";
- status = "disabled";
- };
-
- i2c1: i2c@021a0000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
- reg = <0x021a0000 0x4000>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_I2C1>;
- status = "disabled";
- };
-
- i2c2: i2c@021a4000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
- reg = <0x021a4000 0x4000>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_I2C2>;
- status = "disabled";
- };
-
- i2c3: i2c@021a8000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
- reg = <0x021a8000 0x4000>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_I2C3>;
- status = "disabled";
- };
-
- romcp@021ac000 {
- compatible = "fsl,imx6ul-romcp", "syscon";
- reg = <0x021ac000 0x4000>;
- };
-
- mmdc: mmdc@021b0000 {
- compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
- reg = <0x021b0000 0x4000>;
- };
-
- weim: weim@021b8000 {
- compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
- reg = <0x021b8000 0x4000>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>;
- };
-
- ocotp: ocotp-ctrl@021bc000 {
- compatible = "fsl,imx6ull-ocotp", "syscon";
- reg = <0x021bc000 0x4000>;
- clocks = <&clks IMX6UL_CLK_OCOTP>;
- };
-
- csu: csu@021c0000 {
- compatible = "fsl,imx6ul-csu";
- reg = <0x021c0000 0x4000>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- csi: csi@021c4000 {
- compatible = "fsl,imx6ul-csi", "fsl,imx6s-csi";
- reg = <0x021c4000 0x4000>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>,
- <&clks IMX6UL_CLK_CSI>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "disp-axi", "csi_mclk", "disp_dcic";
- status = "disabled";
- };
-
- lcdif: lcdif@021c8000 {
- compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
- reg = <0x021c8000 0x4000>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
- <&clks IMX6UL_CLK_LCDIF_APB>,
- <&clks IMX6UL_CLK_DUMMY>;
- clock-names = "pix", "axi", "disp_axi";
- status = "disabled";
- };
-
- pxp: pxp@021cc000 {
- compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma";
- reg = <0x021cc000 0x4000>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_PXP>;
- clock-names = "pxp_ipg", "pxp_axi";
- status = "disabled";
- };
-
- qspi: qspi@021e0000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ull-qspi", "fsl,imx6ul-qspi";
- reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
- reg-names = "QuadSPI", "QuadSPI-memory";
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_QSPI>,
- <&clks IMX6UL_CLK_QSPI>;
- clock-names = "qspi_en", "qspi";
- status = "disabled";
- };
-
- wdog3: wdog@021e4000 {
- compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
- reg = <0x021e4000 0x4000>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_WDOG3>;
- status = "disabled";
- };
-
- uart2: serial@021e8000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021e8000 0x4000>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART2_IPG>,
- <&clks IMX6UL_CLK_UART2_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart3: serial@021ec000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021ec000 0x4000>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART3_IPG>,
- <&clks IMX6UL_CLK_UART3_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart4: serial@021f0000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021f0000 0x4000>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART4_IPG>,
- <&clks IMX6UL_CLK_UART4_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart5: serial@021f4000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021f4000 0x4000>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART5_IPG>,
- <&clks IMX6UL_CLK_UART5_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2c4: i2c@021f8000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
- reg = <0x021f8000 0x4000>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_I2C4>;
- status = "disabled";
- };
-
- uart6: serial@021fc000 {
- compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x021fc000 0x4000>;
- interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_UART6_IPG>,
- <&clks IMX6UL_CLK_UART6_SERIAL>;
- clock-names = "ipg", "per";
- dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
- };
-
- aips3: aips-bus@02200000 {
+ aips3: aips-bus@2200000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02200000 0x100000>;
ranges;
- dcp: dcp@02280000 {
+ dcp: crypto@2280000 {
+ compatible = "fsl,imx6ull-dcp", "fsl,imx28-dcp";
reg = <0x02280000 0x4000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
- /*clocks = <&clks IMX6UL_CLK_DCP>;*/
+ clocks = <&clks IMX6ULL_CLK_DCP_CLK>;
clock-names = "dcp";
- status = "disabled";
};
- rngb: rngb@02284000 {
- reg = <0x02284000 0x4000>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ iomuxc_snvs: iomuxc-snvs@2290000 {
+ compatible = "fsl,imx6ull-iomuxc-snvs";
+ reg = <0x02290000 0x4000>;
};
- uart8: serial@02288000 {
+ uart8: serial@2288000 {
compatible = "fsl,imx6ul-uart",
- "fsl,imx6q-uart", "fsl,imx21-uart";
+ "fsl,imx6q-uart";
reg = <0x02288000 0x4000>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_UART8_IPG>,
<&clks IMX6UL_CLK_UART8_SERIAL>;
clock-names = "ipg", "per";
- dmas = <&sdma 45 4 0>, <&sdma 46 4 0>;
- dma-names = "rx", "tx";
status = "disabled";
};
-
- epdc: epdc@0228c000 {
- compatible = "fsl,imx7d-epdc";
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0228c000 0x4000>;
- clocks = <&clks IMX6UL_CLK_EPDC_ACLK>,
- <&clks IMX6UL_CLK_EPDC_PIX>;
- clock-names = "epdc_axi", "epdc_pix";
- /* Need to fix epdc-ram */
- /* epdc-ram = <&gpr 0x4 30>; */
- status = "disabled";
- };
-
- iomuxc_snvs: iomuxc-snvs@02290000 {
- compatible = "fsl,imx6ull-iomuxc-snvs";
- reg = <0x02290000 0x10000>;
- };
-
- snvs_gpr: snvs-gpr@0x02294000 {
- compatible = "fsl, imx6ull-snvs-gpr";
- reg = <0x02294000 0x10000>;
- };
};
};
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+/dts-v1/;
+
+#include "imx6ulz.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/delete-node/ &fec1;
+/delete-node/ &fec2;
+/delete-node/ &can1;
+/delete-node/ &can2;
+/delete-node/ &lcdif;
+/delete-node/ &tsc;
+
+/ {
+ model = "Freescale i.MX6 ULZ 14x14 EVK Board";
+ compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
+ /delete-node/ panel;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+#include "imx6ull.dtsi"
+
+/ {
+ aliases {
+ /delete-property/ ethernet0;
+ /delete-property/ ethernet1;
+ /delete-property/ i2c2;
+ /delete-property/ i2c3;
+ /delete-property/ serial4;
+ /delete-property/ serial5;
+ /delete-property/ serial6;
+ /delete-property/ serial7;
+ /delete-property/ spi2;
+ /delete-property/ spi3;
+ /delete-property/ spi4;
+ };
+};
+
+/delete-node/ &adc1;
+/delete-node/ &ecspi3;
+/delete-node/ &ecspi4;
+/delete-node/ &epit2;
+/delete-node/ &gpt2;
+/delete-node/ &i2c3;
+/delete-node/ &i2c4;
+/delete-node/ &pwm5;
+/delete-node/ &pwm6;
+/delete-node/ &pwm7;
+/delete-node/ &pwm8;
+/delete-node/ &uart5;
+/delete-node/ &uart6;
+/delete-node/ &uart7;
+/delete-node/ &uart8;
--- /dev/null
+/{
+ aliases {
+ mmc0 = &usdhc3;
+ usb0 = &usbotg1;
+ display0 = &lcdif;
+ };
+};
+
+&usbotg1 {
+ dr_mode = "peripheral";
+ };
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif>;
+ status = "okay";
+ display = <&display0>;
+ u-boot,dm-pre-reloc;
+
+ display0: display {
+ bits-per-pixel = <16>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <33260000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <11>;
+ hfront-porch = <11>;
+ vback-porch = <12>;
+ vfront-porch = <11>;
+ hsync-len = <46>;
+ vsync-len = <210>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ interlaced = <0>;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_backlight: backlight {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x0
+ >;
+ };
+
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x78
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x78
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x78
+ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14
+ >;
+ };
+
+};
/dts-v1/;
#include "imx7d.dtsi"
-
+#include "imx7d-pico-u-boot.dtsi"
/ {
- aliases {
- mmc0 = &usdhc3;
- usb0 = &usbotg1;
- };
-
/* Will be filled by the bootloader */
memory@80000000 {
device_type = "memory";
<&clks IMX7D_ENET1_TIME_ROOT_CLK>;
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
assigned-clock-rates = <0>, <100000000>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <ðphy0>;
fsl,magic-packet;
phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
&usbotg1 {
vbus-supply = <®_usb_otg1_vbus>;
- dr_mode = "peripheral";
status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+&{/soc} {
+ u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
+};
+
+&clk {
+ u-boot,dm-spl;
+ u-boot,dm-pre-reloc;
+};
+
+&osc_24m {
+ u-boot,dm-spl;
+ u-boot,dm-pre-reloc;
+};
+
+&aips1 {
+ u-boot,dm-spl;
+ u-boot,dm-pre-reloc;
+};
+
+&aips2 {
+ u-boot,dm-spl;
+};
+
+&aips3 {
+ u-boot,dm-spl;
+};
+
+&iomuxc {
+ u-boot,dm-spl;
+};
+
+&pinctrl_reg_usdhc2_vmmc {
+ u-boot,dm-spl;
+};
+
+&pinctrl_uart2 {
+ u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2_gpio {
+ u-boot,dm-spl;
+};
+
+&pinctrl_usdhc2 {
+ u-boot,dm-spl;
+};
+
+&pinctrl_usdhc3 {
+ u-boot,dm-spl;
+};
+
+&gpio1 {
+ u-boot,dm-spl;
+};
+
+&gpio2 {
+ u-boot,dm-spl;
+};
+
+&gpio3 {
+ u-boot,dm-spl;
+};
+
+&gpio4 {
+ u-boot,dm-spl;
+};
+
+&gpio5 {
+ u-boot,dm-spl;
+};
+
+&uart2 {
+ u-boot,dm-spl;
+};
+
+&usdhc1 {
+ u-boot,dm-spl;
+};
+
+&usdhc2 {
+ u-boot,dm-spl;
+};
+
+&usdhc3 {
+ u-boot,dm-spl;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+
+/ {
+ model = "FSL i.MX8MM EVK board";
+ compatible = "fsl,imx8mm-evk", "fsl,imx8mm";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_led>;
+
+ status {
+ label = "status";
+ gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ at803x,led-act-blind-workaround;
+ at803x,eee-okay;
+ at803x,vddio-1p8v;
+ };
+ };
+};
+
+&uart2 { /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
+ >;
+ };
+
+ pinctrl_gpio_led: gpioledgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2grpgpio {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017-2018 NXP
+ */
+
+#ifndef __DTS_IMX8MM_PINFUNC_H
+#define __DTS_IMX8MM_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x4C0 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO00_SJC_FAIL 0x028 0x290 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x02C 0x294 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x02C 0x294 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M 0x02C 0x294 0x4BC 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2 0x02C 0x294 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_SJC_ACTIVE 0x02C 0x294 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO02_GPIO1_IO2 0x030 0x298 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x030 0x298 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_ANY 0x030 0x298 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO02_SJC_DE_B 0x030 0x298 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x034 0x29C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT 0x034 0x29C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_SDMA1_EXT_EVENT0 0x034 0x29C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_ANAMIX_XTAL_OK 0x034 0x29C 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_SJC_DONE 0x034 0x29C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x038 0x2A0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x038 0x2A0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_SDMA1_EXT_EVENT1 0x038 0x2A0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_ANAMIX_XTAL_OK_LV 0x038 0x2A0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_USDHC1_TEST_TRIG 0x038 0x2A0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x03C 0x2A4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_M4_NMI 0x03C 0x2A4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_PMIC_READY 0x03C 0x2A4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_INT_BOOT 0x03C 0x2A4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_USDHC2_TEST_TRIG 0x03C 0x2A4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x040 0x2A8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_ENET1_MDC 0x040 0x2A8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_USDHC1_CD_B 0x040 0x2A8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_CCMSRCGPCMIX_EXT_CLK3 0x040 0x2A8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_ECSPI1_TEST_TRIG 0x040 0x2A8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x044 0x2AC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_ENET1_MDIO 0x044 0x2AC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_USDHC1_WP 0x044 0x2AC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_CCMSRCGPCMIX_EXT_CLK4 0x044 0x2AC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_ECSPI2_TEST_TRIG 0x044 0x2AC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x048 0x2B0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x048 0x2B0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_USDHC2_RESET_B 0x048 0x2B0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_CCMSRCGPCMIX_WAIT 0x048 0x2B0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_QSPI_TEST_TRIG 0x048 0x2B0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x04C 0x2B4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x04C 0x2B4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_SDMA2_EXT_EVENT0 0x04C 0x2B4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_CCMSRCGPCMIX_STOP 0x04C 0x2B4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_RAWNAND_TEST_TRIG 0x04C 0x2B4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x050 0x2B8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO10_USB1_OTG_ID 0x050 0x2B8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO10_OCOTP_CTRL_WRAPPER_FUSE_LATCHED 0x050 0x2B8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x054 0x2BC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO11_USB2_OTG_ID 0x054 0x2BC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_PMIC_READY 0x054 0x2BC 0x4BC 0x5 0x1
+#define MX8MM_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_OUT0 0x054 0x2BC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO11_CAAM_WRAPPER_RNG_OSC_OBS 0x054 0x2BC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x058 0x2C0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x058 0x2C0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_SDMA2_EXT_EVENT1 0x058 0x2C0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_CCMSRCGPCMIX_OUT1 0x058 0x2C0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_CSU_CSU_ALARM_AUT0 0x058 0x2C0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x05C 0x2C4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x05C 0x2C4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_PWM2_OUT 0x05C 0x2C4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_CCMSRCGPCMIX_OUT2 0x05C 0x2C4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_CSU_CSU_ALARM_AUT1 0x05C 0x2C4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x060 0x2C8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_USB2_OTG_PWR 0x060 0x2C8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_PWM3_OUT 0x060 0x2C8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x060 0x2C8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_CSU_CSU_ALARM_AUT2 0x060 0x2C8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x064 0x2CC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x064 0x2CC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT 0x064 0x2CC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x064 0x2CC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_CSU_CSU_INT_DEB 0x064 0x2CC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x068 0x2D0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_MDC_GPIO1_IO16 0x068 0x2D0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x06C 0x2D4 0x4C0 0x0 0x1
+#define MX8MM_IOMUXC_ENET_MDIO_GPIO1_IO17 0x06C 0x2D4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x070 0x2D8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18 0x070 0x2D8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x074 0x2DC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x074 0x2DC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19 0x074 0x2DC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x078 0x2E0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20 0x078 0x2E0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x07C 0x2E4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21 0x07C 0x2E4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x080 0x2E8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x080 0x2E8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x084 0x2EC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TXC_ENET1_TX_ER 0x084 0x2EC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23 0x084 0x2EC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x088 0x2F0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x088 0x2F0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x08C 0x2F4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RXC_ENET1_RX_ER 0x08C 0x2F4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ENET_RXC_GPIO1_IO25 0x08C 0x2F4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x090 0x2F8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RD0_GPIO1_IO26 0x090 0x2F8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x094 0x2FC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RD1_GPIO1_IO27 0x094 0x2FC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x098 0x300 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RD2_GPIO1_IO28 0x098 0x300 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x09C 0x304 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RD3_GPIO1_IO29 0x09C 0x304 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x0A0 0x308 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x0A0 0x308 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x0A4 0x30C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x0A4 0x30C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x0A8 0x310 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2 0x0A8 0x31 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x0AC 0x314 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x0AC 0x314 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x0B0 0x318 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA2_GPIO2_IO4 0x0B0 0x318 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x0B4 0x31C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA3_GPIO2_IO5 0x0B4 0x31C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x0B8 0x320 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x0B8 0x320 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x0BC 0x324 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x0BC 0x324 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x0C0 0x328 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x0C0 0x328 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x0C4 0x32C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x0C4 0x32C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x0C8 0x330 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x0C8 0x330 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x0CC 0x334 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x0CC 0x334 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0D0 0x338 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x0D0 0x338 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x0D4 0x33C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_CLK_GPIO2_IO13 0x0D4 0x33C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_CLK_CCMSRCGPCMIX_OBSERVE0 0x0D4 0x33C 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_CLK_OBSERVE_MUX_OUT0 0x0D4 0x33C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x0D8 0x340 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_CMD_GPIO2_IO14 0x0D8 0x340 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_CMD_CCMSRCGPCMIX_OBSERVE1 0x0D8 0x340 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_CMD_OBSERVE_MUX_OUT1 0x0D8 0x340 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0DC 0x344 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_DATA0_GPIO2_IO15 0x0DC 0x344 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_DATA0_CCMSRCGPCMIX_OBSERVE2 0x0DC 0x344 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_DATA0_OBSERVE_MUX_OUT2 0x0DC 0x344 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0E0 0x348 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_DATA1_GPIO2_IO16 0x0E0 0x348 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_DATA1_CCMSRCGPCMIX_WAIT 0x0E0 0x348 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_DATA1_OBSERVE_MUX_OUT3 0x0E0 0x348 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0E4 0x34C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_DATA2_GPIO2_IO17 0x0E4 0x34C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_DATA2_CCMSRCGPCMIX_STOP 0x0E4 0x34C 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_DATA2_OBSERVE_MUX_OUT4 0x0E4 0x34C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0E8 0x350 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_DATA3_GPIO2_IO18 0x0E8 0x350 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_DATA3_CCMSRCGPCMIX_EARLY_RESET 0x0E8 0x350 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x0EC 0x354 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x0EC 0x354 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_RESET_B_CCMSRCGPCMIX_SYSTEM_RESET 0x0EC 0x354 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x0F0 0x358 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_WP_GPIO2_IO20 0x0F0 0x358 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_WP_SIM_M_HMASTLOCK 0x0F0 0x358 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_ALE_RAWNAND_ALE 0x0F4 0x35C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x0F4 0x35C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x0F4 0x35C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_ALE_SIM_M_HPROT0 0x0F4 0x35C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B 0x0F8 0x360 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x0F8 0x360 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x0F8 0x360 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CE0_B_SIM_M_HPROT1 0x0F8 0x360 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B 0x0FC 0x364 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B 0x0FC 0x364 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x0FC 0x364 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x0FC 0x364 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_SIM_M_HPROT2 0x0FC 0x364 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_RAWNAND_CE2_B 0x100 0x368 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B 0x100 0x368 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x100 0x368 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x100 0x368 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_SIM_M_HPROT3 0x100 0x368 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_RAWNAND_CE3_B 0x104 0x36C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_QSPI_B_SS1_B 0x104 0x36C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x104 0x36C 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x104 0x36C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_SIM_M_HADDR0 0x104 0x36C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CLE_RAWNAND_CLE 0x108 0x370 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CLE_QSPI_B_SCLK 0x108 0x370 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x108 0x370 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x108 0x370 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CLE_SIM_M_HADDR1 0x108 0x370 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA00_RAWNAND_DATA00 0x10C 0x374 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x10C 0x374 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x10C 0x374 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA00_SIM_M_HADDR2 0x10C 0x374 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA01_RAWNAND_DATA01 0x110 0x378 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x110 0x378 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x110 0x378 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA01_SIM_M_HADDR3 0x110 0x378 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA02_RAWNAND_DATA02 0x114 0x37C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x114 0x37C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x114 0x37C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA02_SIM_M_HADDR4 0x114 0x37C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA03_RAWNAND_DATA03 0x118 0x380 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x118 0x380 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9 0x118 0x380 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA03_SIM_M_HADDR5 0x118 0x380 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_RAWNAND_DATA04 0x11C 0x384 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_QSPI_B_DATA0 0x11C 0x384 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x11C 0x384 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_GPIO3_IO10 0x11C 0x384 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_SIM_M_HADDR6 0x11C 0x384 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_RAWNAND_DATA05 0x120 0x388 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_QSPI_B_DATA1 0x120 0x388 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x120 0x388 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_GPIO3_IO11 0x120 0x388 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_SIM_M_HADDR7 0x120 0x388 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_RAWNAND_DATA06 0x124 0x38C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_QSPI_B_DATA2 0x124 0x38C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x124 0x38C 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_GPIO3_IO12 0x124 0x38C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_SIM_M_HADDR8 0x124 0x38C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_RAWNAND_DATA07 0x128 0x390 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_QSPI_B_DATA3 0x128 0x390 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x128 0x390 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_GPIO3_IO13 0x128 0x390 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_SIM_M_HADDR9 0x128 0x390 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DQS_RAWNAND_DQS 0x12C 0x394 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS 0x12C 0x394 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14 0x12C 0x394 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DQS_SIM_M_HADDR10 0x12C 0x394 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_RAWNAND_RE_B 0x130 0x398 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_QSPI_B_DQS 0x130 0x398 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x130 0x398 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x130 0x398 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_SIM_M_HADDR11 0x130 0x398 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_READY_B_RAWNAND_READY_B 0x134 0x39C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x134 0x39C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_READY_B_SIM_M_HADDR12 0x134 0x39C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_WE_B_RAWNAND_WE_B 0x138 0x3A0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x138 0x3A0 0x000 0x12 0x0
+#define MX8MM_IOMUXC_NAND_WE_B_GPIO3_IO17 0x138 0x3A0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_WE_B_SIM_M_HADDR13 0x138 0x3A0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_WP_B_RAWNAND_WP_B 0x13C 0x3A4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x13C 0x3A4 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_WP_B_GPIO3_IO18 0x13C 0x3A4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_WP_B_SIM_M_HADDR14 0x13C 0x3A4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC 0x140 0x3A8 0x4E4 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXFS_SAI1_TX_DATA0 0x140 0x3A8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x140 0x3A8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXC_SAI5_RX_BCLK 0x144 0x3AC 0x4D0 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXC_SAI1_TX_DATA1 0x144 0x3AC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXC_PDM_CLK 0x144 0x3AC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x144 0x3AC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0x148 0x3B0 0x4D4 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXD0_SAI1_TX_DATA2 0x148 0x3B0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0 0x148 0x3B0 0x534 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x148 0x3B0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1 0x14C 0x3B4 0x4D8 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_SAI1_TX_DATA3 0x14C 0x3B4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_SAI1_TX_SYNC 0x14C 0x3B4 0x4CC 0x2 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0x14C 0x3B4 0x4EC 0x3 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_PDM_DATA1 0x14C 0x3B4 0x538 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x14C 0x3B4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2 0x150 0x3B8 0x4DC 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_DATA4 0x150 0x3B8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_SYNC 0x150 0x3B8 0x4CC 0x2 0x1
+#define MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x150 0x3B8 0x4E8 0x3 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2 0x150 0x3B8 0x53c 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x150 0x3B8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3 0x154 0x3BC 0x4E0 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_SAI1_TX_DATA5 0x154 0x3BC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_SAI1_TX_SYNC 0x154 0x3BC 0x4CC 0x2 0x2
+#define MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0x154 0x3BC 0x000 0x3 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_PDM_DATA3 0x154 0x3BC 0x540 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x154 0x3BC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK 0x158 0x3C0 0x52C 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_SAI1_TX_BCLK 0x158 0x3C0 0x4C8 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_SAI4_MCLK 0x158 0x3C0 0x000 0x2 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x158 0x3C0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_CCMSRCGPCMIX_TESTER_ACK 0x158 0x3C0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXFS_SAI1_RX_SYNC 0x15C 0x3C4 0x4C4 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXFS_SAI5_RX_SYNC 0x15C 0x3C4 0x4E4 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXFS_CORESIGHT_TRACE_CLK 0x15C 0x3C4 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x15C 0x3C4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXFS_SIM_M_HADDR15 0x15C 0x3C4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXC_SAI1_RX_BCLK 0x160 0x3C8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXC_SAI5_RX_BCLK 0x160 0x3C8 0x4D0 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXC_CORESIGHT_TRACE_CTL 0x160 0x3C8 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x160 0x3C8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXC_SIM_M_HADDR16 0x160 0x3C8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0 0x164 0x3CC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_SAI5_RX_DATA0 0x164 0x3CC 0x4D4 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXD0_PDM_DATA0 0x164 0x3CC 0x534 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD0_CORESIGHT_TRACE0 0x164 0x3CC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x164 0x3CC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_CCMSRCGPCMIX_BOOT_CFG0 0x164 0x3CC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_SIM_M_HADDR17 0x164 0x3CC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1 0x168 0x3D0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_SAI5_RX_DATA1 0x168 0x3D0 0x4D8 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXD1_PDM_DATA1 0x168 0x3D0 0x538 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD1_CORESIGHT_TRACE1 0x168 0x3D0 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x168 0x3D0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_CCMSRCGPCMIX_BOOT_CFG1 0x168 0x3D0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_SIM_M_HADDR18 0x168 0x3D0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_SAI1_RX_DATA2 0x16C 0x3D4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_SAI5_RX_DATA2 0x16C 0x3D4 0x4DC 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXD2_PDM_DATA2 0x16C 0x3D4 0x53C 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD2_CORESIGHT_TRACE2 0x16C 0x3D4 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x16C 0x3D4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_CCMSRCGPCMIX_BOOT_CFG2 0x16C 0x3D4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_SIM_M_HADDR19 0x16C 0x3D4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_SAI1_RX_DATA3 0x170 0x3D8 0x4E0 0x0 0x1
+#define MX8MM_IOMUXC_SAI1_RXD3_SAI5_RX_DATA3 0x170 0x3D8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_PDM_DATA3 0x170 0x3D8 0x540 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD3_CORESIGHT_TRACE3 0x170 0x3D8 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x170 0x3D8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_CCMSRCGPCMIX_BOOT_CFG3 0x170 0x3D8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_SIM_M_HADDR20 0x170 0x3D8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_SAI1_RX_DATA4 0x174 0x3DC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK 0x174 0x3DC 0x51C 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_SAI6_RX_BCLK 0x174 0x3DC 0x510 0x2 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_CORESIGHT_TRACE4 0x174 0x3DC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x174 0x3DC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_CCMSRCGPCMIX_BOOT_CFG4 0x174 0x3DC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_SIM_M_HADDR21 0x174 0x3DC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SAI1_RX_DATA5 0x178 0x3E0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0 0x178 0x3E0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0 0x178 0x3E0 0x514 0x2 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SAI1_RX_SYNC 0x178 0x3E0 0x4C4 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD5_CORESIGHT_TRACE5 0x178 0x3E0 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x178 0x3E0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_CCMSRCGPCMIX_BOOT_CFG5 0x178 0x3E0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SIM_M_HADDR22 0x178 0x3E0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_SAI1_RX_DATA6 0x17C 0x3E4 0x520 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC 0x17C 0x3E4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC 0x17C 0x3E4 0x518 0x2 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_CORESIGHT_TRACE6 0x17C 0x3E4 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x17C 0x3E4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_CCMSRCGPCMIX_BOOT_CFG6 0x17C 0x3E4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_SIM_M_HADDR23 0x17C 0x3E4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_RX_DATA7 0x180 0x3E8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_SAI6_MCLK 0x180 0x3E8 0x530 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_TX_SYNC 0x180 0x3E8 0x4CC 0x2 0x4
+#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_TX_DATA4 0x180 0x3E8 0x000 0x3 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_CORESIGHT_TRACE7 0x180 0x3E8 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x180 0x3E8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_CCMSRCGPCMIX_BOOT_CFG7 0x180 0x3E8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_SIM_M_HADDR24 0x180 0x3E8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC 0x184 0x3EC 0x4CC 0x0 0x3
+#define MX8MM_IOMUXC_SAI1_TXFS_SAI5_TX_SYNC 0x184 0x3EC 0x4EC 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXFS_CORESIGHT_EVENTO 0x184 0x3EC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x184 0x3EC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXFS_SIM_M_HADDR25 0x184 0x3EC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK 0x188 0x3F0 0x4C8 0x0 0x1
+#define MX8MM_IOMUXC_SAI1_TXC_SAI5_TX_BCLK 0x188 0x3F0 0x4E8 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXC_CORESIGHT_EVENTI 0x188 0x3F0 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x188 0x3F0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXC_SIM_M_HADDR26 0x188 0x3F0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0 0x18C 0x3F4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_SAI5_TX_DATA0 0x18C 0x3F4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_CORESIGHT_TRACE8 0x18C 0x3F4 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x18C 0x3F4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_CCMSRCGPCMIX_BOOT_CFG8 0x18C 0x3F4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_SIM_M_HADDR27 0x18C 0x3F4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1 0x190 0x3F8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_SAI5_TX_DATA1 0x190 0x3F8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_CORESIGHT_TRACE9 0x190 0x3F8 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x190 0x3F8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_CCMSRCGPCMIX_BOOT_CFG9 0x190 0x3F8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_SIM_M_HADDR28 0x190 0x3F8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_SAI1_TX_DATA2 0x194 0x3FC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_SAI5_TX_DATA2 0x194 0x3FC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_CORESIGHT_TRACE10 0x194 0x3FC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x194 0x3FC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_CCMSRCGPCMIX_BOOT_CFG10 0x194 0x3FC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_SIM_M_HADDR29 0x194 0x3FC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_SAI1_TX_DATA3 0x198 0x400 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_SAI5_TX_DATA3 0x198 0x400 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_CORESIGHT_TRACE11 0x198 0x400 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x198 0x400 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_CCMSRCGPCMIX_BOOT_CFG11 0x198 0x400 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_SIM_M_HADDR30 0x198 0x400 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_SAI1_TX_DATA4 0x19C 0x404 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK 0x19C 0x404 0x510 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXD4_SAI6_TX_BCLK 0x19C 0x404 0x51C 0x2 0x1
+#define MX8MM_IOMUXC_SAI1_TXD4_CORESIGHT_TRACE12 0x19C 0x404 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x19C 0x404 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_CCMSRCGPCMIX_BOOT_CFG12 0x19C 0x404 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_SIM_M_HADDR31 0x19C 0x404 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_SAI1_TX_DATA5 0x1A0 0x408 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0 0x1A0 0x408 0x514 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0 0x1A0 0x408 0x000 0x2 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_CORESIGHT_TRACE13 0x1A0 0x408 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x1A0 0x408 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_CCMSRCGPCMIX_BOOT_CFG13 0x1A0 0x408 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_SIM_M_HBURST0 0x1A0 0x408 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_SAI1_TX_DATA6 0x1A4 0x40C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_SAI6_RX_SYNC 0x1A4 0x40C 0x518 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXD6_SAI6_TX_SYNC 0x1A4 0x40C 0x520 0x2 0x1
+#define MX8MM_IOMUXC_SAI1_TXD6_CORESIGHT_TRACE14 0x1A4 0x40C 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x1A4 0x40C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_CCMSRCGPCMIX_BOOT_CFG14 0x1A4 0x40C 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_SIM_M_HBURST1 0x1A4 0x40C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_SAI1_TX_DATA7 0x1A8 0x410 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_SAI6_MCLK 0x1A8 0x410 0x530 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXD7_PDM_CLK 0x1A8 0x410 0x000 0x3 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_CORESIGHT_TRACE15 0x1A8 0x410 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x1A8 0x410 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_CCMSRCGPCMIX_BOOT_CFG15 0x1A8 0x410 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_SIM_M_HBURST2 0x1A8 0x410 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK 0x1AC 0x414 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_MCLK_SAI5_MCLK 0x1AC 0x414 0x52C 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_MCLK_SAI1_TX_BCLK 0x1AC 0x414 0x4C8 0x2 0x2
+#define MX8MM_IOMUXC_SAI1_MCLK_PDM_CLK 0x1AC 0x414 0x000 0x3 0x0
+#define MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x1AC 0x414 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_MCLK_SIM_M_HRESP 0x1AC 0x414 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0x1B0 0x418 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC 0x1B0 0x418 0x4EC 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x1B0 0x418 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_SIM_M_HSIZE0 0x1B0 0x418 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK 0x1B4 0x41C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_RXC_SAI5_TX_BCLK 0x1B4 0x41C 0x4E8 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1B4 0x41C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_RXC_SIM_M_HSIZE1 0x1B4 0x41C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0x1B8 0x420 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0 0x1B8 0x420 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x1B8 0x420 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_SIM_M_HSIZE2 0x1B8 0x420 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0x1BC 0x424 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1 0x1BC 0x424 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x1BC 0x424 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_SIM_M_HWRITE 0x1BC 0x424 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0x1C0 0x428 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_TXC_SAI5_TX_DATA2 0x1C0 0x428 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x1C0 0x428 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_TXC_SIM_M_HREADYOUT 0x1C0 0x428 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0x1C4 0x42C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_TXD0_SAI5_TX_DATA3 0x1C4 0x42C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x1C4 0x42C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_TXD0_TPSMP_CLK 0x1C4 0x42C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK 0x1C8 0x430 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_MCLK_SAI5_MCLK 0x1C8 0x430 0x52C 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x1C8 0x430 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_MCLK_TPSMP_HDATA_DIR 0x1C8 0x430 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0x1CC 0x434 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_RXFS_GPT1_CAPTURE1 0x1CC 0x434 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_RXFS_SAI5_RX_SYNC 0x1CC 0x434 0x4E4 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x1CC 0x434 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_RXFS_TPSMP_HTRANS0 0x1CC 0x434 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_GPT1_CAPTURE2 0x1D0 0x438 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1 0x1D0 0x438 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x1D4 0x43C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_GPT1_COMPARE1 0x1D4 0x43C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_SAI5_RX_DATA0 0x1D4 0x43C 0x4D4 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0 0x1D4 0x43C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CLK 0x1D8 0x440 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1 0x1D8 0x440 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x1DC 0x444 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2 0x1DC 0x444 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2 0x1DC 0x444 0x4DC 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0 0x1DC 0x444 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2 0x1DC 0x444 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x1E0 0x448 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_TXD_GPT1_COMPARE3 0x1E0 0x448 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_TXD_SAI5_RX_DATA3 0x1E0 0x448 0x4E0 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x1E0 0x448 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_TXD_TPSMP_HDATA3 0x1E0 0x448 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0x1E4 0x44C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT 0x1E4 0x44C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_MCLK_SAI5_MCLK 0x1E4 0x44C 0x52C 0x2 0x3
+#define MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x1E4 0x44C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_MCLK_TPSMP_HDATA4 0x1E4 0x44C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT 0x1E8 0x450 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT 0x1E8 0x450 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x1E8 0x450 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SPDIF_TX_TPSMP_HDATA5 0x1E8 0x450 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN 0x1EC 0x454 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x1EC 0x454 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x1EC 0x454 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SPDIF_RX_TPSMP_HDATA6 0x1EC 0x454 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK 0x1F0 0x458 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x1F0 0x458 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x1F0 0x458 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SPDIF_EXT_CLK_TPSMP_HDATA7 0x1F0 0x458 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x1F4 0x45C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x1F4 0x45C 0x504 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DTE_TX 0x1F4 0x45C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_GPIO5_IO6 0x1F4 0x45C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_TPSMP_HDATA8 0x1F4 0x45C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x1F8 0x460 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x1F8 0x460 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DTE_RX 0x1F8 0x460 0x504 0x1 0x1
+#define MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7 0x1F8 0x460 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI1_MOSI_TPSMP_HDATA9 0x1F8 0x460 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x1FC 0x464 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x1FC 0x464 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_UART3_DTE_RTS_B 0x1FC 0x464 0x500 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x1FC 0x464 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_TPSMP_HDATA10 0x1FC 0x464 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI1_SS0_ECSPI1_SS0 0x200 0x468 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x200 0x468 0x500 0x1 0x1
+#define MX8MM_IOMUXC_ECSPI1_SS0_UART3_DTE_CTS_B 0x200 0x468 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x200 0x468 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI1_SS0_TPSMP_HDATA11 0x200 0x468 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x204 0x46C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x204 0x46C 0x50C 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DTE_TX 0x204 0x46C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x204 0x46C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_TPSMP_HDATA12 0x204 0x46C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x208 0x470 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x208 0x470 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX 0x208 0x470 0x50C 0x1 0x1
+#define MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x208 0x470 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI2_MOSI_TPSMP_HDATA13 0x208 0x470 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x20C 0x474 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x20C 0x474 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_UART4_DTE_RTS_B 0x20C 0x474 0x508 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x20C 0x474 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_TPSMP_HDATA14 0x20C 0x474 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x210 0x478 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x210 0x478 0x508 0x1 0x1
+#define MX8MM_IOMUXC_ECSPI2_SS0_UART4_DTE_CTS_B 0x210 0x478 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x210 0x478 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI2_SS0_TPSMP_HDATA15 0x210 0x478 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x214 0x47C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C1_SCL_ENET1_MDC 0x214 0x47C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x214 0x47C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C1_SCL_TPSMP_HDATA16 0x214 0x47C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x218 0x480 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C1_SDA_ENET1_MDIO 0x218 0x480 0x4C0 0x1 0x2
+#define MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x218 0x480 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C1_SDA_TPSMP_HDATA17 0x218 0x480 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x21C 0x484 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C2_SCL_ENET1_1588_EVENT1_IN 0x21C 0x484 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x21C 0x484 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C2_SCL_TPSMP_HDATA18 0x21C 0x484 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x220 0x488 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C2_SDA_ENET1_1588_EVENT1_OUT 0x220 0x488 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x220 0x488 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C2_SDA_TPSMP_HDATA19 0x220 0x488 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x224 0x48C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_PWM4_OUT 0x224 0x48C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_GPT2_CLK 0x224 0x48C 0x000 0x2 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x224 0x48C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_TPSMP_HDATA20 0x224 0x48C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x228 0x490 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_PWM3_OUT 0x228 0x490 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_GPT3_CLK 0x228 0x490 0x000 0x2 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x228 0x490 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_TPSMP_HDATA21 0x228 0x490 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x22C 0x494 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_PWM2_OUT 0x22C 0x494 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x22C 0x494 0x524 0x12 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x22C 0x494 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_TPSMP_HDATA22 0x22C 0x494 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x230 0x498 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_PWM1_OUT 0x230 0x498 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B 0x230 0x498 0x528 0x2 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x230 0x498 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_TPSMP_HDATA23 0x230 0x498 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x234 0x49C 0x4F4 0x0 0x0
+#define MX8MM_IOMUXC_UART1_RXD_UART1_DTE_TX 0x234 0x49C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x234 0x49C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22 0x234 0x49C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24 0x234 0x49C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x238 0x4A0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX 0x238 0x4A0 0x4F4 0x0 0x0
+#define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x238 0x4A0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23 0x238 0x4A0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25 0x238 0x4A0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x23C 0x4A4 0x4FC 0x0 0x0
+#define MX8MM_IOMUXC_UART2_RXD_UART2_DTE_TX 0x23C 0x4A4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x23C 0x4A4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART2_RXD_GPIO5_IO24 0x23C 0x4A4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART2_RXD_TPSMP_HDATA26 0x23C 0x4A4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x240 0x4A8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART2_TXD_UART2_DTE_RX 0x240 0x4A8 0x4FC 0x0 0x1
+#define MX8MM_IOMUXC_UART2_TXD_ECSPI3_SS0 0x240 0x4A8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x240 0x4A8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART2_TXD_TPSMP_HDATA27 0x240 0x4A8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x244 0x4AC 0x504 0x0 0x2
+#define MX8MM_IOMUXC_UART3_RXD_UART3_DTE_TX 0x244 0x4AC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x244 0x4AC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART3_RXD_UART1_DTE_RTS_B 0x244 0x4AC 0x4F0 0x1 0x0
+#define MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26 0x244 0x4AC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART3_RXD_TPSMP_HDATA28 0x244 0x4AC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x248 0x4B0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART3_TXD_UART3_DTE_RX 0x248 0x4B0 0x504 0x0 0x3
+#define MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x248 0x4B0 0x4F0 0x1 0x1
+#define MX8MM_IOMUXC_UART3_TXD_UART1_DTE_CTS_B 0x248 0x4B0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27 0x248 0x4B0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART3_TXD_TPSMP_HDATA29 0x248 0x4B0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x24C 0x4B4 0x50C 0x0 0x2
+#define MX8MM_IOMUXC_UART4_RXD_UART4_DTE_TX 0x24C 0x4B4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x24C 0x4B4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART4_RXD_UART2_DTE_RTS_B 0x24C 0x4B4 0x4F8 0x1 0x0
+#define MX8MM_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B 0x24C 0x4B4 0x524 0x2 0x1
+#define MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28 0x24C 0x4B4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART4_RXD_TPSMP_HDATA30 0x24C 0x4B4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x250 0x4B8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART4_TXD_UART4_DTE_RX 0x250 0x4B8 0x50C 0x0 0x3
+#define MX8MM_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x250 0x4B8 0x4F8 0x1 0x1
+#define MX8MM_IOMUXC_UART4_TXD_UART2_DTE_CTS_B 0x250 0x4B8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B 0x250 0x4B8 0x528 0x2 0x1
+#define MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29 0x250 0x4B8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART4_TXD_TPSMP_HDATA31 0x250 0x4B8 0x000 0x7 0x0
+
+#endif /* __DTS_IMX8MM_PINFUNC_H */
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx8mm-pinfunc.h"
+
+/ {
+ compatible = "fsl,imx8mm";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &fec1;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ i2c3 = &i2c4;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &ecspi3;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ A53_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clk IMX8MM_CLK_ARM>;
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
+ };
+
+ A53_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clk IMX8MM_CLK_ARM>;
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
+ };
+
+ A53_2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clk IMX8MM_CLK_ARM>;
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
+ };
+
+ A53_3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clk IMX8MM_CLK_ARM>;
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
+ };
+
+ A53_L2: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ a53_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <850000>;
+ clock-latency-ns = <150000>;
+ };
+
+ opp-1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <150000>;
+ opp-suspend;
+ };
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
+ osc_32k: clock-osc-32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "osc_32k";
+ };
+
+ osc_24m: clock-osc-24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc_24m";
+ };
+
+ clk_ext1: clock-ext1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <133000000>;
+ clock-output-names = "clk_ext1";
+ };
+
+ clk_ext2: clock-ext2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <133000000>;
+ clock-output-names = "clk_ext2";
+ };
+
+ clk_ext3: clock-ext3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <133000000>;
+ clock-output-names = "clk_ext3";
+ };
+
+ clk_ext4: clock-ext4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency= <133000000>;
+ clock-output-names = "clk_ext4";
+ };
+
+ gic: interrupt-controller@38800000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */
+ <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7
+ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
+ clock-frequency = <8000000>;
+ arm,no-tick-in-suspend;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x3e000000>;
+
+ aips1: bus@30000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio1: gpio@30200000 {
+ compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+ reg = <0x30200000 0x10000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@30210000 {
+ compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+ reg = <0x30210000 0x10000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@30220000 {
+ compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+ reg = <0x30220000 0x10000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@30230000 {
+ compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+ reg = <0x30230000 0x10000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio@30240000 {
+ compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+ reg = <0x30240000 0x10000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ wdog1: watchdog@30280000 {
+ compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
+ reg = <0x30280000 0x10000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>;
+ status = "disabled";
+ };
+
+ wdog2: watchdog@30290000 {
+ compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
+ reg = <0x30290000 0x10000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>;
+ status = "disabled";
+ };
+
+ wdog3: watchdog@302a0000 {
+ compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
+ reg = <0x302a0000 0x10000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>;
+ status = "disabled";
+ };
+
+ sdma2: dma-controller@302c0000 {
+ compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+ reg = <0x302c0000 0x10000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
+ <&clk IMX8MM_CLK_SDMA2_ROOT>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+ };
+
+ sdma3: dma-controller@302b0000 {
+ compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+ reg = <0x302b0000 0x10000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
+ <&clk IMX8MM_CLK_SDMA3_ROOT>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+ };
+
+ iomuxc: pinctrl@30330000 {
+ compatible = "fsl,imx8mm-iomuxc";
+ reg = <0x30330000 0x10000>;
+ };
+
+ gpr: iomuxc-gpr@30340000 {
+ compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
+ reg = <0x30340000 0x10000>;
+ };
+
+ ocotp: ocotp-ctrl@30350000 {
+ compatible = "fsl,imx8mm-ocotp", "fsl,imx7d-ocotp", "syscon";
+ reg = <0x30350000 0x10000>;
+ clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
+ /* For nvmem subnodes */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ anatop: anatop@30360000 {
+ compatible = "fsl,imx8mm-anatop", "syscon", "simple-bus";
+ reg = <0x30360000 0x10000>;
+ };
+
+ snvs: snvs@30370000 {
+ compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
+ reg = <0x30370000 0x10000>;
+
+ snvs_rtc: snvs-rtc-lp {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ regmap = <&snvs>;
+ offset = <0x34>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ snvs_pwrkey: snvs-powerkey {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&snvs>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ linux,keycode = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ clk: clock-controller@30380000 {
+ compatible = "fsl,imx8mm-ccm";
+ reg = <0x30380000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+ <&clk_ext3>, <&clk_ext4>;
+ clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+ "clk_ext3", "clk_ext4";
+ };
+
+ src: reset-controller@30390000 {
+ compatible = "fsl,imx8mm-src", "syscon";
+ reg = <0x30390000 0x10000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <1>;
+ };
+ };
+
+ aips2: bus@30400000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pwm1: pwm@30660000 {
+ compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+ reg = <0x30660000 0x10000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
+ <&clk IMX8MM_CLK_PWM1_ROOT>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@30670000 {
+ compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+ reg = <0x30670000 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
+ <&clk IMX8MM_CLK_PWM2_ROOT>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@30680000 {
+ compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+ reg = <0x30680000 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
+ <&clk IMX8MM_CLK_PWM3_ROOT>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@30690000 {
+ compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+ reg = <0x30690000 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
+ <&clk IMX8MM_CLK_PWM4_ROOT>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+ };
+
+ aips3: bus@30800000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ecspi1: spi@30820000 {
+ compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30820000 0x10000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
+ <&clk IMX8MM_CLK_ECSPI1_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ ecspi2: spi@30830000 {
+ compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30830000 0x10000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
+ <&clk IMX8MM_CLK_ECSPI2_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ ecspi3: spi@30840000 {
+ compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30840000 0x10000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
+ <&clk IMX8MM_CLK_ECSPI3_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart1: serial@30860000 {
+ compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+ reg = <0x30860000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
+ <&clk IMX8MM_CLK_UART1_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart3: serial@30880000 {
+ compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+ reg = <0x30880000 0x10000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
+ <&clk IMX8MM_CLK_UART3_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart2: serial@30890000 {
+ compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+ reg = <0x30890000 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
+ <&clk IMX8MM_CLK_UART2_ROOT>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ i2c1: i2c@30a20000 {
+ compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30a20000 0x10000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_I2C1_ROOT>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@30a30000 {
+ compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30a30000 0x10000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_I2C2_ROOT>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@30a40000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+ reg = <0x30a40000 0x10000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_I2C3_ROOT>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@30a50000 {
+ compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30a50000 0x10000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_I2C4_ROOT>;
+ status = "disabled";
+ };
+
+ uart4: serial@30a60000 {
+ compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+ reg = <0x30a60000 0x10000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_UART4_ROOT>,
+ <&clk IMX8MM_CLK_UART4_ROOT>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ usdhc1: mmc@30b40000 {
+ compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+ reg = <0x30b40000 0x10000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_DUMMY>,
+ <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+ <&clk IMX8MM_CLK_USDHC1_ROOT>;
+ clock-names = "ipg", "ahb", "per";
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC1>;
+ assigned-clock-rates = <400000000>;
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc2: mmc@30b50000 {
+ compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+ reg = <0x30b50000 0x10000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_DUMMY>,
+ <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+ <&clk IMX8MM_CLK_USDHC2_ROOT>;
+ clock-names = "ipg", "ahb", "per";
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc3: mmc@30b60000 {
+ compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+ reg = <0x30b60000 0x10000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_DUMMY>,
+ <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+ <&clk IMX8MM_CLK_USDHC3_ROOT>;
+ clock-names = "ipg", "ahb", "per";
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+ assigned-clock-rates = <400000000>;
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ sdma1: dma-controller@30bd0000 {
+ compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+ reg = <0x30bd0000 0x10000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
+ <&clk IMX8MM_CLK_SDMA1_ROOT>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+ };
+
+ fec1: ethernet@30be0000 {
+ compatible = "fsl,imx8mm-fec", "fsl,imx6sx-fec";
+ reg = <0x30be0000 0x10000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
+ <&clk IMX8MM_CLK_ENET1_ROOT>,
+ <&clk IMX8MM_CLK_ENET_TIMER>,
+ <&clk IMX8MM_CLK_ENET_REF>,
+ <&clk IMX8MM_CLK_ENET_PHY_REF>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
+ <&clk IMX8MM_CLK_ENET_TIMER>,
+ <&clk IMX8MM_CLK_ENET_REF>,
+ <&clk IMX8MM_CLK_ENET_TIMER>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
+ <&clk IMX8MM_SYS_PLL2_100M>,
+ <&clk IMX8MM_SYS_PLL2_125M>;
+ assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+ fsl,num-tx-queues = <3>;
+ fsl,num-rx-queues = <3>;
+ status = "disabled";
+ };
+
+ };
+
+ aips4: bus@32c00000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbotg1: usb@32e40000 {
+ compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
+ reg = <0x32e40000 0x200>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
+ clock-names = "usb1_ctrl_root_clk";
+ assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>,
+ <&clk IMX8MM_CLK_USB_CORE_REF>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>,
+ <&clk IMX8MM_SYS_PLL1_100M>;
+ fsl,usbphy = <&usbphynop1>;
+ fsl,usbmisc = <&usbmisc1 0>;
+ status = "disabled";
+ };
+
+ usbphynop1: usbphynop1 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+ assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
+ clock-names = "main_clk";
+ };
+
+ usbmisc1: usbmisc@32e40200 {
+ compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
+ #index-cells = <1>;
+ reg = <0x32e40200 0x200>;
+ };
+
+ usbotg2: usb@32e50000 {
+ compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
+ reg = <0x32e50000 0x200>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
+ clock-names = "usb1_ctrl_root_clk";
+ assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>,
+ <&clk IMX8MM_CLK_USB_CORE_REF>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>,
+ <&clk IMX8MM_SYS_PLL1_100M>;
+ fsl,usbphy = <&usbphynop2>;
+ fsl,usbmisc = <&usbmisc2 0>;
+ status = "disabled";
+ };
+
+ usbphynop2: usbphynop2 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+ assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
+ clock-names = "main_clk";
+ };
+
+ usbmisc2: usbmisc@32e50200 {
+ compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
+ #index-cells = <1>;
+ reg = <0x32e50200 0x200>;
+ };
+
+ };
+
+ dma_apbh: dma-controller@33000000 {
+ compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
+ reg = <0x33000000 0x2000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+ #dma-cells = <1>;
+ dma-channels = <4>;
+ clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+ };
+
+ gpmi: nand-controller@33002000{
+ compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "bch";
+ clocks = <&clk IMX8MM_CLK_NAND_ROOT>,
+ <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+ clock-names = "gpmi_io", "gpmi_bch_apb";
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+ };
+};
pinctrl_enet1: enet1grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
- MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0X1b0b0
+ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9
MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9
MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9
+ MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x170f9
>;
};
};
#define MXC_CPU_MX6Q 0x63
#define MXC_CPU_MX6UL 0x64
#define MXC_CPU_MX6ULL 0x65
+#define MXC_CPU_MX6ULZ 0x6B
#define MXC_CPU_MX6SOLO 0x66 /* dummy */
#define MXC_CPU_MX6SLL 0x67
#define MXC_CPU_MX6D 0x6A
#define MXC_CPU_MX7S 0x71 /* dummy ID */
#define MXC_CPU_MX7D 0x72
#define MXC_CPU_IMX8MQ 0x82
+#define MXC_CPU_IMX8MM 0x85 /* dummy ID */
+#define MXC_CPU_IMX8MML 0x86 /* dummy ID */
+#define MXC_CPU_IMX8MMD 0x87 /* dummy ID */
+#define MXC_CPU_IMX8MMDL 0x88 /* dummy ID */
+#define MXC_CPU_IMX8MMS 0x89 /* dummy ID */
+#define MXC_CPU_IMX8MMSL 0x8a /* dummy ID */
#define MXC_CPU_IMX8QXP_A0 0x90 /* dummy ID */
#define MXC_CPU_IMX8QM 0x91 /* dummy ID */
#define MXC_CPU_IMX8QXP 0x92 /* dummy ID */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018-2019 NXP
+ */
+
+#ifndef __CONTAINER_HEADER_H_
+#define __CONTAINER_HEADER_H_
+
+#include <linux/sizes.h>
+#include <linux/types.h>
+
+#define IV_MAX_LEN 32
+#define HASH_MAX_LEN 64
+
+#define CONTAINER_HDR_ALIGNMENT 0x400
+#define CONTAINER_HDR_EMMC_OFFSET 0
+#define CONTAINER_HDR_MMCSD_OFFSET SZ_32K
+#define CONTAINER_HDR_QSPI_OFFSET SZ_4K
+#define CONTAINER_HDR_NAND_OFFSET SZ_128M
+
+struct container_hdr {
+ u8 version;
+ u8 length_lsb;
+ u8 length_msb;
+ u8 tag;
+ u32 flags;
+ u16 sw_version;
+ u8 fuse_version;
+ u8 num_images;
+ u16 sig_blk_offset;
+ u16 reserved;
+} __packed;
+
+struct boot_img_t {
+ u32 offset;
+ u32 size;
+ u64 dst;
+ u64 entry;
+ u32 hab_flags;
+ u32 meta;
+ u8 hash[HASH_MAX_LEN];
+ u8 iv[IV_MAX_LEN];
+} __packed;
+
+struct signature_block_hdr {
+ u8 version;
+ u8 length_lsb;
+ u8 length_msb;
+ u8 tag;
+ u16 srk_table_offset;
+ u16 cert_offset;
+ u16 blob_offset;
+ u16 signature_offset;
+ u32 reserved;
+} __packed;
+#endif
#define SC_RPC_SVC_PAD 6U
#define SC_RPC_SVC_MISC 7U
#define SC_RPC_SVC_IRQ 8U
-#define SC_RPC_SVC_ABORT 9U
+#define SC_RPC_SVC_SECO 9U
+#define SC_RPC_SVC_ABORT 10U
+
/* Types */
#define PM_FUNC_REBOOT 9U
#define PM_FUNC_REBOOT_PARTITION 12U
#define PM_FUNC_CPU_START 11U
+#define PM_FUNC_IS_PARTITION_STARTED 24U
/* MISC RPC */
#define MISC_FUNC_UNKNOWN 0
#define RM_FUNC_SET_MASTER_SID 11U
#define RM_FUNC_SET_PERIPHERAL_PERMISSIONS 12U
#define RM_FUNC_IS_RESOURCE_OWNED 13U
+#define RM_FUNC_GET_RESOURCE_OWNER 33U
#define RM_FUNC_IS_RESOURCE_MASTER 14U
#define RM_FUNC_IS_RESOURCE_PERIPHERAL 15U
#define RM_FUNC_GET_RESOURCE_INFO 16U
#define RM_FUNC_IS_PAD_OWNED 25U
#define RM_FUNC_DUMP 27U
+/* SECO RPC */
+#define SECO_FUNC_UNKNOWN 0
+#define SECO_FUNC_IMAGE_LOAD 1U
+#define SECO_FUNC_AUTHENTICATE 2U
+#define SECO_FUNC_FORWARD_LIFECYCLE 3U
+#define SECO_FUNC_RETURN_LIFECYCLE 4U
+#define SECO_FUNC_COMMIT 5U
+#define SECO_FUNC_ATTEST_MODE 6U
+#define SECO_FUNC_ATTEST 7U
+#define SECO_FUNC_GET_ATTEST_PKEY 8U
+#define SECO_FUNC_GET_ATTEST_SIGN 9U
+#define SECO_FUNC_ATTEST_VERIFY 10U
+#define SECO_FUNC_GEN_KEY_BLOB 11U
+#define SECO_FUNC_LOAD_KEY 12U
+#define SECO_FUNC_GET_MP_KEY 13U
+#define SECO_FUNC_UPDATE_MPMR 14U
+#define SECO_FUNC_GET_MP_SIGN 15U
+#define SECO_FUNC_BUILD_INFO 16U
+#define SECO_FUNC_CHIP_INFO 17U
+#define SECO_FUNC_ENABLE_DEBUG 18U
+#define SECO_FUNC_GET_EVENT 19U
+#define SECO_FUNC_FUSE_WRITE 20U
+
#endif /* SC_RPC_H */
#include <asm/arch/sci/svc/pad/api.h>
#include <asm/arch/sci/svc/pm/api.h>
#include <asm/arch/sci/svc/rm/api.h>
+#include <asm/arch/sci/svc/seco/api.h>
#include <asm/arch/sci/rpc.h>
#include <dt-bindings/soc/imx_rsrc.h>
#include <linux/errno.h>
/* PM API*/
int sc_pm_set_resource_power_mode(sc_ipc_t ipc, sc_rsrc_t resource,
sc_pm_power_mode_t mode);
+int sc_pm_get_resource_power_mode(sc_ipc_t ipc, sc_rsrc_t resource,
+ sc_pm_power_mode_t *mode);
int sc_pm_set_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk,
sc_pm_clock_rate_t *rate);
int sc_pm_get_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk,
sc_pm_clock_rate_t *rate);
int sc_pm_clock_enable(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk,
sc_bool_t enable, sc_bool_t autog);
+int sc_pm_set_clock_parent(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk,
+ sc_pm_clk_parent_t parent);
+int sc_pm_cpu_start(sc_ipc_t ipc, sc_rsrc_t resource, sc_bool_t enable,
+ sc_faddr_t address);
+sc_bool_t sc_pm_is_partition_started(sc_ipc_t ipc, sc_rm_pt_t pt);
/* MISC API */
+int sc_misc_set_control(sc_ipc_t ipc, sc_rsrc_t resource,
+ sc_ctrl_t ctrl, u32 val);
int sc_misc_get_control(sc_ipc_t ipc, sc_rsrc_t resource, sc_ctrl_t ctrl,
u32 *val);
void sc_misc_get_boot_dev(sc_ipc_t ipc, sc_rsrc_t *boot_dev);
/* RM API */
sc_bool_t sc_rm_is_memreg_owned(sc_ipc_t ipc, sc_rm_mr_t mr);
+int sc_rm_find_memreg(sc_ipc_t ipc, sc_rm_mr_t *mr, sc_faddr_t addr_start,
+ sc_faddr_t addr_end);
+int sc_rm_set_memreg_permissions(sc_ipc_t ipc, sc_rm_mr_t mr,
+ sc_rm_pt_t pt, sc_rm_perm_t perm);
int sc_rm_get_memreg_info(sc_ipc_t ipc, sc_rm_mr_t mr, sc_faddr_t *addr_start,
sc_faddr_t *addr_end);
sc_bool_t sc_rm_is_resource_owned(sc_ipc_t ipc, sc_rsrc_t resource);
+int sc_rm_partition_alloc(sc_ipc_t ipc, sc_rm_pt_t *pt, sc_bool_t secure,
+ sc_bool_t isolated, sc_bool_t restricted,
+ sc_bool_t grant, sc_bool_t coherent);
+int sc_rm_partition_free(sc_ipc_t ipc, sc_rm_pt_t pt);
+int sc_rm_get_partition(sc_ipc_t ipc, sc_rm_pt_t *pt);
+int sc_rm_set_parent(sc_ipc_t ipc, sc_rm_pt_t pt, sc_rm_pt_t pt_parent);
+int sc_rm_assign_resource(sc_ipc_t ipc, sc_rm_pt_t pt, sc_rsrc_t resource);
+int sc_rm_assign_pad(sc_ipc_t ipc, sc_rm_pt_t pt, sc_pad_t pad);
+sc_bool_t sc_rm_is_pad_owned(sc_ipc_t ipc, sc_pad_t pad);
+int sc_rm_get_resource_owner(sc_ipc_t ipc, sc_rsrc_t resource,
+ sc_rm_pt_t *pt);
/* PAD API */
int sc_pad_set(sc_ipc_t ipc, sc_pad_t pad, u32 val);
+
+/* SMMU API */
+int sc_rm_set_master_sid(sc_ipc_t ipc, sc_rsrc_t resource, sc_rm_sid_t sid);
+
+/* SECO API */
+int sc_seco_authenticate(sc_ipc_t ipc, sc_seco_auth_cmd_t cmd,
+ sc_faddr_t addr);
+int sc_seco_forward_lifecycle(sc_ipc_t ipc, u32 change);
+int sc_seco_chip_info(sc_ipc_t ipc, u16 *lc, u16 *monotonic, u32 *uid_l,
+ u32 *uid_h);
+void sc_seco_build_info(sc_ipc_t ipc, u32 *version, u32 *commit);
+int sc_seco_get_event(sc_ipc_t ipc, u8 idx, u32 *event);
+int sc_seco_gen_key_blob(sc_ipc_t ipc, u32 id, sc_faddr_t load_addr,
+ sc_faddr_t export_addr, u16 max_size);
+
#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef SC_SECO_API_H
+#define SC_SECO_API_H
+
+/* Includes */
+
+#include <asm/arch/sci/types.h>
+
+/* Defines */
+#define SC_SECO_AUTH_CONTAINER 0U /* Authenticate container */
+#define SC_SECO_VERIFY_IMAGE 1U /* Verify image */
+#define SC_SECO_REL_CONTAINER 2U /* Release container */
+#define SC_SECO_AUTH_SECO_FW 3U /* SECO Firmware */
+#define SC_SECO_AUTH_HDMI_TX_FW 4U /* HDMI TX Firmware */
+#define SC_SECO_AUTH_HDMI_RX_FW 5U /* HDMI RX Firmware */
+
+#define SC_SECO_RNG_STAT_UNAVAILABLE 0U /* Unable to initialize the RNG */
+#define SC_SECO_RNG_STAT_INPROGRESS 1U /* Initialization is on-going */
+#define SC_SECO_RNG_STAT_READY 2U /* Initialized */
+
+/* Types */
+
+/*!
+ * This type is used to issue SECO authenticate commands.
+ */
+typedef u8 sc_seco_auth_cmd_t;
+
+/*!
+ * This type is used to return the RNG initialization status.
+ */
+typedef u32 sc_seco_rng_stat_t;
+
+#endif /* SC_SECO_API_H */
u32 g_ap_mu;
};
+extern unsigned long boot_pointer[];
void build_info(void);
enum boot_device get_boot_device(void);
int print_bootinfo(void);
/*
* Copyright 2017 NXP
*
- * Peng Fan <peng.fan@nxp.com>
+ * Peng Fan <peng.fan at nxp.com>
*/
-#ifndef _ASM_ARCH_IMX8M_CLOCK_H
-#define _ASM_ARCH_IMX8M_CLOCK_H
-
#include <linux/bitops.h>
+#ifdef CONFIG_IMX8MQ
+#include <asm/arch/clock_imx8mq.h>
+#elif defined(CONFIG_IMX8MM)
+#include <asm/arch/clock_imx8mm.h>
+#else
+#error "Error no clock.h"
+#endif
+
#define MHZ(X) ((X) * 1000000UL)
-enum pll_clocks {
- ANATOP_ARM_PLL,
- ANATOP_GPU_PLL,
- ANATOP_SYSTEM_PLL1,
- ANATOP_SYSTEM_PLL2,
- ANATOP_SYSTEM_PLL3,
- ANATOP_AUDIO_PLL1,
- ANATOP_AUDIO_PLL2,
- ANATOP_VIDEO_PLL1,
- ANATOP_VIDEO_PLL2,
- ANATOP_DRAM_PLL,
+/* Mainly for compatible to imx common code. */
+enum mxc_clock {
+ MXC_ARM_CLK = 0,
+ MXC_IPG_CLK,
+ MXC_CSPI_CLK,
+ MXC_ESDHC_CLK,
+ MXC_ESDHC2_CLK,
+ MXC_ESDHC3_CLK,
+ MXC_I2C_CLK,
+ MXC_UART_CLK,
+ MXC_QSPI_CLK,
};
enum clk_slice_type {
DRAM_SEL_CLOCK_SLICE,
};
-enum clk_root_index {
- MXC_ARM_CLK = 0,
- ARM_A53_CLK_ROOT = 0,
- ARM_M4_CLK_ROOT = 1,
- VPU_A53_CLK_ROOT = 2,
- GPU_CORE_CLK_ROOT = 3,
- GPU_SHADER_CLK_ROOT = 4,
- MAIN_AXI_CLK_ROOT = 16,
- ENET_AXI_CLK_ROOT = 17,
- NAND_USDHC_BUS_CLK_ROOT = 18,
- VPU_BUS_CLK_ROOT = 19,
- DISPLAY_AXI_CLK_ROOT = 20,
- DISPLAY_APB_CLK_ROOT = 21,
- DISPLAY_RTRM_CLK_ROOT = 22,
- USB_BUS_CLK_ROOT = 23,
- GPU_AXI_CLK_ROOT = 24,
- GPU_AHB_CLK_ROOT = 25,
- NOC_CLK_ROOT = 26,
- NOC_APB_CLK_ROOT = 27,
- AHB_CLK_ROOT = 32,
- IPG_CLK_ROOT = 33,
- MXC_IPG_CLK = 33,
- AUDIO_AHB_CLK_ROOT = 34,
- MIPI_DSI_ESC_RX_CLK_ROOT = 36,
- DRAM_SEL_CFG = 48,
- CORE_SEL_CFG = 49,
- DRAM_ALT_CLK_ROOT = 64,
- DRAM_APB_CLK_ROOT = 65,
- VPU_G1_CLK_ROOT = 66,
- VPU_G2_CLK_ROOT = 67,
- DISPLAY_DTRC_CLK_ROOT = 68,
- DISPLAY_DC8000_CLK_ROOT = 69,
- PCIE1_CTRL_CLK_ROOT = 70,
- PCIE1_PHY_CLK_ROOT = 71,
- PCIE1_AUX_CLK_ROOT = 72,
- DC_PIXEL_CLK_ROOT = 73,
- LCDIF_PIXEL_CLK_ROOT = 74,
- SAI1_CLK_ROOT = 75,
- SAI2_CLK_ROOT = 76,
- SAI3_CLK_ROOT = 77,
- SAI4_CLK_ROOT = 78,
- SAI5_CLK_ROOT = 79,
- SAI6_CLK_ROOT = 80,
- SPDIF1_CLK_ROOT = 81,
- SPDIF2_CLK_ROOT = 82,
- ENET_REF_CLK_ROOT = 83,
- ENET_TIMER_CLK_ROOT = 84,
- ENET_PHY_REF_CLK_ROOT = 85,
- NAND_CLK_ROOT = 86,
- QSPI_CLK_ROOT = 87,
- MXC_ESDHC_CLK = 88,
- USDHC1_CLK_ROOT = 88,
- MXC_ESDHC2_CLK = 89,
- USDHC2_CLK_ROOT = 89,
- I2C1_CLK_ROOT = 90,
- MXC_I2C_CLK = 90,
- I2C2_CLK_ROOT = 91,
- I2C3_CLK_ROOT = 92,
- I2C4_CLK_ROOT = 93,
- UART1_CLK_ROOT = 94,
- UART2_CLK_ROOT = 95,
- UART3_CLK_ROOT = 96,
- UART4_CLK_ROOT = 97,
- USB_CORE_REF_CLK_ROOT = 98,
- USB_PHY_REF_CLK_ROOT = 99,
- GIC_CLK_ROOT = 100,
- ECSPI1_CLK_ROOT = 101,
- ECSPI2_CLK_ROOT = 102,
- PWM1_CLK_ROOT = 103,
- PWM2_CLK_ROOT = 104,
- PWM3_CLK_ROOT = 105,
- PWM4_CLK_ROOT = 106,
- GPT1_CLK_ROOT = 107,
- GPT2_CLK_ROOT = 108,
- GPT3_CLK_ROOT = 109,
- GPT4_CLK_ROOT = 110,
- GPT5_CLK_ROOT = 111,
- GPT6_CLK_ROOT = 112,
- TRACE_CLK_ROOT = 113,
- WDOG_CLK_ROOT = 114,
- WRCLK_CLK_ROOT = 115,
- IPP_DO_CLKO1 = 116,
- IPP_DO_CLKO2 = 117,
- MIPI_DSI_CORE_CLK_ROOT = 118,
- MIPI_DSI_PHY_REF_CLK_ROOT = 119,
- MIPI_DSI_DBI_CLK_ROOT = 120,
- OLD_MIPI_DSI_ESC_CLK_ROOT = 121,
- MIPI_CSI1_CORE_CLK_ROOT = 122,
- MIPI_CSI1_PHY_REF_CLK_ROOT = 123,
- MIPI_CSI1_ESC_CLK_ROOT = 124,
- MIPI_CSI2_CORE_CLK_ROOT = 125,
- MIPI_CSI2_PHY_REF_CLK_ROOT = 126,
- MIPI_CSI2_ESC_CLK_ROOT = 127,
- PCIE2_CTRL_CLK_ROOT = 128,
- PCIE2_PHY_CLK_ROOT = 129,
- PCIE2_AUX_CLK_ROOT = 130,
- ECSPI3_CLK_ROOT = 131,
- OLD_MIPI_DSI_ESC_RX_ROOT = 132,
- DISPLAY_HDMI_CLK_ROOT = 133,
- CLK_ROOT_MAX,
-};
-
-enum clk_root_src {
- OSC_25M_CLK,
- ARM_PLL_CLK,
- DRAM_PLL1_CLK,
- VIDEO_PLL2_CLK,
- VPU_PLL_CLK,
- GPU_PLL_CLK,
- SYSTEM_PLL1_800M_CLK,
- SYSTEM_PLL1_400M_CLK,
- SYSTEM_PLL1_266M_CLK,
- SYSTEM_PLL1_200M_CLK,
- SYSTEM_PLL1_160M_CLK,
- SYSTEM_PLL1_133M_CLK,
- SYSTEM_PLL1_100M_CLK,
- SYSTEM_PLL1_80M_CLK,
- SYSTEM_PLL1_40M_CLK,
- SYSTEM_PLL2_1000M_CLK,
- SYSTEM_PLL2_500M_CLK,
- SYSTEM_PLL2_333M_CLK,
- SYSTEM_PLL2_250M_CLK,
- SYSTEM_PLL2_200M_CLK,
- SYSTEM_PLL2_166M_CLK,
- SYSTEM_PLL2_125M_CLK,
- SYSTEM_PLL2_100M_CLK,
- SYSTEM_PLL2_50M_CLK,
- SYSTEM_PLL3_CLK,
- AUDIO_PLL1_CLK,
- AUDIO_PLL2_CLK,
- VIDEO_PLL_CLK,
- OSC_32K_CLK,
- EXT_CLK_1,
- EXT_CLK_2,
- EXT_CLK_3,
- EXT_CLK_4,
- OSC_27M_CLK,
-};
-
-/* CCGR index */
-enum clk_ccgr_index {
- CCGR_DVFS = 0,
- CCGR_ANAMIX = 1,
- CCGR_CPU = 2,
- CCGR_CSU = 4,
- CCGR_DRAM1 = 5,
- CCGR_DRAM2_OBSOLETE = 6,
- CCGR_ECSPI1 = 7,
- CCGR_ECSPI2 = 8,
- CCGR_ECSPI3 = 9,
- CCGR_ENET1 = 10,
- CCGR_GPIO1 = 11,
- CCGR_GPIO2 = 12,
- CCGR_GPIO3 = 13,
- CCGR_GPIO4 = 14,
- CCGR_GPIO5 = 15,
- CCGR_GPT1 = 16,
- CCGR_GPT2 = 17,
- CCGR_GPT3 = 18,
- CCGR_GPT4 = 19,
- CCGR_GPT5 = 20,
- CCGR_GPT6 = 21,
- CCGR_HS = 22,
- CCGR_I2C1 = 23,
- CCGR_I2C2 = 24,
- CCGR_I2C3 = 25,
- CCGR_I2C4 = 26,
- CCGR_IOMUX = 27,
- CCGR_IOMUX1 = 28,
- CCGR_IOMUX2 = 29,
- CCGR_IOMUX3 = 30,
- CCGR_IOMUX4 = 31,
- CCGR_M4 = 32,
- CCGR_MU = 33,
- CCGR_OCOTP = 34,
- CCGR_OCRAM = 35,
- CCGR_OCRAM_S = 36,
- CCGR_PCIE = 37,
- CCGR_PERFMON1 = 38,
- CCGR_PERFMON2 = 39,
- CCGR_PWM1 = 40,
- CCGR_PWM2 = 41,
- CCGR_PWM3 = 42,
- CCGR_PWM4 = 43,
- CCGR_QOS = 44,
- CCGR_DISMIX = 45,
- CCGR_MEGAMIX = 46,
- CCGR_QSPI = 47,
- CCGR_RAWNAND = 48,
- CCGR_RDC = 49,
- CCGR_ROM = 50,
- CCGR_SAI1 = 51,
- CCGR_SAI2 = 52,
- CCGR_SAI3 = 53,
- CCGR_SAI4 = 54,
- CCGR_SAI5 = 55,
- CCGR_SAI6 = 56,
- CCGR_SCTR = 57,
- CCGR_SDMA1 = 58,
- CCGR_SDMA2 = 59,
- CCGR_SEC_DEBUG = 60,
- CCGR_SEMA1 = 61,
- CCGR_SEMA2 = 62,
- CCGR_SIM_DISPLAY = 63,
- CCGR_SIM_ENET = 64,
- CCGR_SIM_M = 65,
- CCGR_SIM_MAIN = 66,
- CCGR_SIM_S = 67,
- CCGR_SIM_WAKEUP = 68,
- CCGR_SIM_USB = 69,
- CCGR_SIM_VPU = 70,
- CCGR_SNVS = 71,
- CCGR_TRACE = 72,
- CCGR_UART1 = 73,
- CCGR_UART2 = 74,
- CCGR_UART3 = 75,
- CCGR_UART4 = 76,
- CCGR_USB_CTRL1 = 77,
- CCGR_USB_CTRL2 = 78,
- CCGR_USB_PHY1 = 79,
- CCGR_USB_PHY2 = 80,
- CCGR_USDHC1 = 81,
- CCGR_USDHC2 = 82,
- CCGR_WDOG1 = 83,
- CCGR_WDOG2 = 84,
- CCGR_WDOG3 = 85,
- CCGR_VA53 = 86,
- CCGR_GPU = 87,
- CCGR_HEVC = 88,
- CCGR_AVC = 89,
- CCGR_VP9 = 90,
- CCGR_HEVC_INTER = 91,
- CCGR_GIC = 92,
- CCGR_DISPLAY = 93,
- CCGR_HDMI = 94,
- CCGR_HDMI_PHY = 95,
- CCGR_XTAL = 96,
- CCGR_PLL = 97,
- CCGR_TSENSOR = 98,
- CCGR_VPU_DEC = 99,
- CCGR_PCIE2 = 100,
- CCGR_MIPI_CSI1 = 101,
- CCGR_MIPI_CSI2 = 102,
- CCGR_MAX,
-};
-
-/* src index */
-enum clk_src_index {
- CLK_SRC_CKIL_SYNC_REQ = 0,
- CLK_SRC_ARM_PLL_EN = 1,
- CLK_SRC_GPU_PLL_EN = 2,
- CLK_SRC_VPU_PLL_EN = 3,
- CLK_SRC_DRAM_PLL_EN = 4,
- CLK_SRC_SYSTEM_PLL1_EN = 5,
- CLK_SRC_SYSTEM_PLL2_EN = 6,
- CLK_SRC_SYSTEM_PLL3_EN = 7,
- CLK_SRC_AUDIO_PLL1_EN = 8,
- CLK_SRC_AUDIO_PLL2_EN = 9,
- CLK_SRC_VIDEO_PLL1_EN = 10,
- CLK_SRC_VIDEO_PLL2_EN = 11,
- CLK_SRC_ARM_PLL = 12,
- CLK_SRC_GPU_PLL = 13,
- CLK_SRC_VPU_PLL = 14,
- CLK_SRC_DRAM_PLL = 15,
- CLK_SRC_SYSTEM_PLL1_800M = 16,
- CLK_SRC_SYSTEM_PLL1_400M = 17,
- CLK_SRC_SYSTEM_PLL1_266M = 18,
- CLK_SRC_SYSTEM_PLL1_200M = 19,
- CLK_SRC_SYSTEM_PLL1_160M = 20,
- CLK_SRC_SYSTEM_PLL1_133M = 21,
- CLK_SRC_SYSTEM_PLL1_100M = 22,
- CLK_SRC_SYSTEM_PLL1_80M = 23,
- CLK_SRC_SYSTEM_PLL1_40M = 24,
- CLK_SRC_SYSTEM_PLL2_1000M = 25,
- CLK_SRC_SYSTEM_PLL2_500M = 26,
- CLK_SRC_SYSTEM_PLL2_333M = 27,
- CLK_SRC_SYSTEM_PLL2_250M = 28,
- CLK_SRC_SYSTEM_PLL2_200M = 29,
- CLK_SRC_SYSTEM_PLL2_166M = 30,
- CLK_SRC_SYSTEM_PLL2_125M = 31,
- CLK_SRC_SYSTEM_PLL2_100M = 32,
- CLK_SRC_SYSTEM_PLL2_50M = 33,
- CLK_SRC_SYSTEM_PLL3 = 34,
- CLK_SRC_AUDIO_PLL1 = 35,
- CLK_SRC_AUDIO_PLL2 = 36,
- CLK_SRC_VIDEO_PLL1 = 37,
- CLK_SRC_VIDEO_PLL2 = 38,
- CLK_SRC_OSC_25M = 39,
- CLK_SRC_OSC_27M = 40,
-};
-
enum root_pre_div {
CLK_ROOT_PRE_DIV1 = 0,
CLK_ROOT_PRE_DIV2,
struct ccm_root ip_root[78];
};
+enum enet_freq {
+ ENET_25MHZ = 0,
+ ENET_50MHZ,
+ ENET_125MHZ,
+};
+
+#define DRAM_BYPASS_ROOT_CONFIG(_rate, _m, _p, _s, _k) \
+ { \
+ .clk = (_rate), \
+ .alt_root_sel = (_m), \
+ .alt_pre_div = (_p), \
+ .apb_root_sel = (_s), \
+ .apb_pre_div = (_k), \
+ }
+
+struct dram_bypass_clk_setting {
+ ulong clk;
+ int alt_root_sel;
+ enum root_pre_div alt_pre_div;
+ int apb_root_sel;
+ enum root_pre_div apb_pre_div;
+};
+
#define CCGR_CLK_ON_MASK 0x03
#define CLK_SRC_ON_MASK 0x03
#define CLK_ROOT_IPG_POST_DIV_MASK 0x3
#define CLK_ROOT_POST_DIV_SHIFT 0
#define CLK_ROOT_POST_DIV(n) ((n) & 0x3f)
-
-/* AUDIO PLL1/2 VIDEO PLL1 GPU PLL VPU PLL ARM PLL*/
-#define FRAC_PLL_LOCK_MASK BIT(31)
-#define FRAC_PLL_CLKE_MASK BIT(21)
-#define FRAC_PLL_PD_MASK BIT(19)
-#define FRAC_PLL_REFCLK_SEL_MASK BIT(16)
-#define FRAC_PLL_LOCK_SEL_MASK BIT(15)
-#define FRAC_PLL_BYPASS_MASK BIT(14)
-#define FRAC_PLL_COUNTCLK_SEL_MASK BIT(13)
-#define FRAC_PLL_NEWDIV_VAL_MASK BIT(12)
-#define FRAC_PLL_NEWDIV_ACK_MASK BIT(11)
-#define FRAC_PLL_REFCLK_DIV_VAL(n) (((n) << 5) & (0x3f << 5))
-#define FRAC_PLL_REFCLK_DIV_VAL_MASK (0x3f << 5)
-#define FRAC_PLL_REFCLK_DIV_VAL_SHIFT 5
-#define FRAC_PLL_OUTPUT_DIV_VAL_MASK 0x1f
-#define FRAC_PLL_OUTPUT_DIV_VAL(n) ((n) & 0x1f)
-
-#define FRAC_PLL_REFCLK_SEL_OSC_25M (0 << 16)
-#define FRAC_PLL_REFCLK_SEL_OSC_27M BIT(16)
-#define FRAC_PLL_REFCLK_SEL_HDMI_PHY_27M (2 << 16)
-#define FRAC_PLL_REFCLK_SEL_CLK_PN (3 << 16)
-
-#define FRAC_PLL_FRAC_DIV_CTL_MASK (0x1ffffff << 7)
-#define FRAC_PLL_FRAC_DIV_CTL_SHIFT 7
-#define FRAC_PLL_INT_DIV_CTL_MASK 0x7f
-#define FRAC_PLL_INT_DIV_CTL_VAL(n) ((n) & 0x7f)
-
-/* SYS PLL1/2/3 VIDEO PLL2 DRAM PLL */
-#define SSCG_PLL_LOCK_MASK BIT(31)
-#define SSCG_PLL_CLKE_MASK BIT(25)
-#define SSCG_PLL_DIV2_CLKE_MASK BIT(23)
-#define SSCG_PLL_DIV3_CLKE_MASK BIT(21)
-#define SSCG_PLL_DIV4_CLKE_MASK BIT(19)
-#define SSCG_PLL_DIV5_CLKE_MASK BIT(17)
-#define SSCG_PLL_DIV6_CLKE_MASK BIT(15)
-#define SSCG_PLL_DIV8_CLKE_MASK BIT(13)
-#define SSCG_PLL_DIV10_CLKE_MASK BIT(11)
-#define SSCG_PLL_DIV20_CLKE_MASK BIT(9)
-#define SSCG_PLL_VIDEO_PLL2_CLKE_MASK BIT(9)
-#define SSCG_PLL_DRAM_PLL_CLKE_MASK BIT(9)
-#define SSCG_PLL_PLL3_CLKE_MASK BIT(9)
-#define SSCG_PLL_PD_MASK BIT(7)
-#define SSCG_PLL_BYPASS1_MASK BIT(5)
-#define SSCG_PLL_BYPASS2_MASK BIT(4)
-#define SSCG_PLL_LOCK_SEL_MASK BIT(3)
-#define SSCG_PLL_COUNTCLK_SEL_MASK BIT(2)
-#define SSCG_PLL_REFCLK_SEL_MASK 0x3
-#define SSCG_PLL_REFCLK_SEL_OSC_25M (0 << 16)
-#define SSCG_PLL_REFCLK_SEL_OSC_27M BIT(16)
-#define SSCG_PLL_REFCLK_SEL_HDMI_PHY_27M (2 << 16)
-#define SSCG_PLL_REFCLK_SEL_CLK_PN (3 << 16)
-
-#define SSCG_PLL_SSDS_MASK BIT(8)
-#define SSCG_PLL_SSMD_MASK (0x7 << 5)
-#define SSCG_PLL_SSMF_MASK (0xf << 1)
-#define SSCG_PLL_SSE_MASK 0x1
-
-#define SSCG_PLL_REF_DIVR1_MASK (0x7 << 25)
-#define SSCG_PLL_REF_DIVR1_SHIFT 25
-#define SSCG_PLL_REF_DIVR1_VAL(n) (((n) << 25) & SSCG_PLL_REF_DIVR1_MASK)
-#define SSCG_PLL_REF_DIVR2_MASK (0x3f << 19)
-#define SSCG_PLL_REF_DIVR2_SHIFT 19
-#define SSCG_PLL_REF_DIVR2_VAL(n) (((n) << 19) & SSCG_PLL_REF_DIVR2_MASK)
-#define SSCG_PLL_FEEDBACK_DIV_F1_MASK (0x3f << 13)
-#define SSCG_PLL_FEEDBACK_DIV_F1_SHIFT 13
-#define SSCG_PLL_FEEDBACK_DIV_F1_VAL(n) (((n) << 13) & \
- SSCG_PLL_FEEDBACK_DIV_F1_MASK)
-#define SSCG_PLL_FEEDBACK_DIV_F2_MASK (0x3f << 7)
-#define SSCG_PLL_FEEDBACK_DIV_F2_SHIFT 7
-#define SSCG_PLL_FEEDBACK_DIV_F2_VAL(n) (((n) << 7) & \
- SSCG_PLL_FEEDBACK_DIV_F2_MASK)
-#define SSCG_PLL_OUTPUT_DIV_VAL_MASK (0x3f << 1)
-#define SSCG_PLL_OUTPUT_DIV_VAL_SHIFT 1
-#define SSCG_PLL_OUTPUT_DIV_VAL(n) (((n) << 1) & \
- SSCG_PLL_OUTPUT_DIV_VAL_MASK)
-#define SSCG_PLL_FILTER_RANGE_MASK 0x1
-
-#define HW_DIGPROG_MAJOR_UPPER_MASK (0xff << 16)
-#define HW_DIGPROG_MAJOR_LOWER_MASK (0xff << 8)
-#define HW_DIGPROG_MINOR_MASK 0xff
-
-#define HW_OSC_27M_CLKE_MASK BIT(4)
-#define HW_OSC_25M_CLKE_MASK BIT(2)
-#define HW_OSC_32K_SEL_MASK 0x1
-#define HW_OSC_32K_SEL_RTC 0x1
-#define HW_OSC_32K_SEL_25M_DIV800 0x0
-
-#define HW_FRAC_ARM_PLL_DIV_MASK (0x7 << 20)
-#define HW_FRAC_ARM_PLL_DIV_SHIFT 20
-#define HW_FRAC_VPU_PLL_DIV_MASK (0x7 << 16)
-#define HW_FRAC_VPU_PLL_DIV_SHIFT 16
-#define HW_FRAC_GPU_PLL_DIV_MASK (0x7 << 12)
-#define HW_FRAC_GPU_PLL_DIV_SHIFT 12
-#define HW_FRAC_VIDEO_PLL1_DIV_MASK (0x7 << 10)
-#define HW_FRAC_VIDEO_PLL1_DIV_SHIFT 10
-#define HW_FRAC_AUDIO_PLL2_DIV_MASK (0x7 << 4)
-#define HW_FRAC_AUDIO_PLL2_DIV_SHIFT 4
-#define HW_FRAC_AUDIO_PLL1_DIV_MASK 0x7
-#define HW_FRAC_AUDIO_PLL1_DIV_SHIFT 0
-
-#define HW_SSCG_VIDEO_PLL2_DIV_MASK (0x7 << 16)
-#define HW_SSCG_VIDEO_PLL2_DIV_SHIFT 16
-#define HW_SSCG_DRAM_PLL_DIV_MASK (0x7 << 14)
-#define HW_SSCG_DRAM_PLL_DIV_SHIFT 14
-#define HW_SSCG_SYSTEM_PLL3_DIV_MASK (0x7 << 8)
-#define HW_SSCG_SYSTEM_PLL3_DIV_SHIFT 8
-#define HW_SSCG_SYSTEM_PLL2_DIV_MASK (0x7 << 4)
-#define HW_SSCG_SYSTEM_PLL2_DIV_SHIFT 4
-#define HW_SSCG_SYSTEM_PLL1_DIV_MASK 0x7
-#define HW_SSCG_SYSTEM_PLL1_DIV_SHIFT 0
-
#define ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK 0x01000000
#define ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK 0x02000000
#define ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK 0x03000000
#define ENET1_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK 0x01000000
#define ENET_PHY_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK 0x01000000
-enum enet_freq {
- ENET_25MHZ = 0,
- ENET_50MHZ,
- ENET_125MHZ,
-};
-
-enum frac_pll_out_val {
- FRAC_PLL_OUT_1000M,
- FRAC_PLL_OUT_1600M,
-};
-
-#define DRAM_BYPASS_ROOT_CONFIG(_rate, _m, _p, _s, _k) \
- { \
- .clk = (_rate), \
- .alt_root_sel = (_m), \
- .alt_pre_div = (_p), \
- .apb_root_sel = (_s), \
- .apb_pre_div = (_k), \
- }
-
-struct dram_bypass_clk_setting {
- ulong clk;
- int alt_root_sel;
- enum root_pre_div alt_pre_div;
- int apb_root_sel;
- enum root_pre_div apb_pre_div;
-};
-
void dram_pll_init(ulong pll_val);
void dram_enable_bypass(ulong clk_val);
void dram_disable_bypass(void);
void init_clk_usdhc(u32 index);
void init_uart_clk(u32 index);
void init_wdog_clk(void);
-unsigned int mxc_get_clock(enum clk_root_index clk);
+unsigned int mxc_get_clock(enum mxc_clock clk);
int clock_enable(enum clk_ccgr_index index, bool enable);
int clock_root_enabled(enum clk_root_index clock_id);
int clock_root_cfg(enum clk_root_index clock_id, enum root_pre_div pre_div,
void enable_ocotp_clk(unsigned char enable);
int enable_i2c_clk(unsigned char enable, unsigned int i2c_num);
int set_clk_enet(enum enet_freq type);
-#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018-2019 NXP
+ *
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+#ifndef _ASM_ARCH_IMX8MM_CLOCK_H
+#define _ASM_ARCH_IMX8MM_CLOCK_H
+
+#define PLL_1443X_RATE(_rate, _m, _p, _s, _k) \
+ { \
+ .rate = (_rate), \
+ .mdiv = (_m), \
+ .pdiv = (_p), \
+ .sdiv = (_s), \
+ .kdiv = (_k), \
+ }
+
+#define LOCK_STATUS BIT(31)
+#define LOCK_SEL_MASK BIT(29)
+#define CLKE_MASK BIT(11)
+#define RST_MASK BIT(9)
+#define BYPASS_MASK BIT(4)
+#define MDIV_SHIFT 12
+#define MDIV_MASK GENMASK(21, 12)
+#define PDIV_SHIFT 4
+#define PDIV_MASK GENMASK(9, 4)
+#define SDIV_SHIFT 0
+#define SDIV_MASK GENMASK(2, 0)
+#define KDIV_SHIFT 0
+#define KDIV_MASK GENMASK(15, 0)
+
+struct imx_int_pll_rate_table {
+ u32 rate;
+ int mdiv;
+ int pdiv;
+ int sdiv;
+ int kdiv;
+};
+
+enum pll_clocks {
+ ANATOP_ARM_PLL,
+ ANATOP_VPU_PLL,
+ ANATOP_GPU_PLL,
+ ANATOP_SYSTEM_PLL1,
+ ANATOP_SYSTEM_PLL2,
+ ANATOP_SYSTEM_PLL3,
+ ANATOP_AUDIO_PLL1,
+ ANATOP_AUDIO_PLL2,
+ ANATOP_VIDEO_PLL,
+ ANATOP_DRAM_PLL,
+};
+
+enum clk_root_index {
+ ARM_A53_CLK_ROOT = 0,
+ ARM_M4_CLK_ROOT = 1,
+ VPU_A53_CLK_ROOT = 2,
+ GPU3D_CLK_ROOT = 3,
+ GPU2D_CLK_ROOT = 4,
+ MAIN_AXI_CLK_ROOT = 16,
+ ENET_AXI_CLK_ROOT = 17,
+ NAND_USDHC_BUS_CLK_ROOT = 18,
+ VPU_BUS_CLK_ROOT = 19,
+ DISPLAY_AXI_CLK_ROOT = 20,
+ DISPLAY_APB_CLK_ROOT = 21,
+ DISPLAY_RTRM_CLK_ROOT = 22,
+ USB_BUS_CLK_ROOT = 23,
+ GPU_AXI_CLK_ROOT = 24,
+ GPU_AHB_CLK_ROOT = 25,
+ NOC_CLK_ROOT = 26,
+ NOC_APB_CLK_ROOT = 27,
+ AHB_CLK_ROOT = 32,
+ IPG_CLK_ROOT = 33,
+ AUDIO_AHB_CLK_ROOT = 34,
+ MIPI_DSI_ESC_RX_CLK_ROOT = 36,
+ DRAM_SEL_CFG = 48,
+ CORE_SEL_CFG = 49,
+ DRAM_ALT_CLK_ROOT = 64,
+ DRAM_APB_CLK_ROOT = 65,
+ VPU_G1_CLK_ROOT = 66,
+ VPU_G2_CLK_ROOT = 67,
+ DISPLAY_DTRC_CLK_ROOT = 68,
+ DISPLAY_DC8000_CLK_ROOT = 69,
+ PCIE_CTRL_CLK_ROOT = 70,
+ PCIE_PHY_CLK_ROOT = 71,
+ PCIE_AUX_CLK_ROOT = 72,
+ DC_PIXEL_CLK_ROOT = 73,
+ LCDIF_PIXEL_CLK_ROOT = 74,
+ SAI1_CLK_ROOT = 75,
+ SAI2_CLK_ROOT = 76,
+ SAI3_CLK_ROOT = 77,
+ SAI4_CLK_ROOT = 78,
+ SAI5_CLK_ROOT = 79,
+ SAI6_CLK_ROOT = 80,
+ SPDIF1_CLK_ROOT = 81,
+ SPDIF2_CLK_ROOT = 82,
+ ENET_REF_CLK_ROOT = 83,
+ ENET_TIMER_CLK_ROOT = 84,
+ ENET_PHY_REF_CLK_ROOT = 85,
+ NAND_CLK_ROOT = 86,
+ QSPI_CLK_ROOT = 87,
+ USDHC1_CLK_ROOT = 88,
+ USDHC2_CLK_ROOT = 89,
+ I2C1_CLK_ROOT = 90,
+ I2C2_CLK_ROOT = 91,
+ I2C3_CLK_ROOT = 92,
+ I2C4_CLK_ROOT = 93,
+ UART1_CLK_ROOT = 94,
+ UART2_CLK_ROOT = 95,
+ UART3_CLK_ROOT = 96,
+ UART4_CLK_ROOT = 97,
+ USB_CORE_REF_CLK_ROOT = 98,
+ USB_PHY_REF_CLK_ROOT = 99,
+ GIC_CLK_ROOT = 100,
+ ECSPI1_CLK_ROOT = 101,
+ ECSPI2_CLK_ROOT = 102,
+ PWM1_CLK_ROOT = 103,
+ PWM2_CLK_ROOT = 104,
+ PWM3_CLK_ROOT = 105,
+ PWM4_CLK_ROOT = 106,
+ GPT1_CLK_ROOT = 107,
+ GPT2_CLK_ROOT = 108,
+ GPT3_CLK_ROOT = 109,
+ GPT4_CLK_ROOT = 110,
+ GPT5_CLK_ROOT = 111,
+ GPT6_CLK_ROOT = 112,
+ TRACE_CLK_ROOT = 113,
+ WDOG_CLK_ROOT = 114,
+ WRCLK_CLK_ROOT = 115,
+ IPP_DO_CLKO1 = 116,
+ IPP_DO_CLKO2 = 117,
+ MIPI_DSI_CORE_CLK_ROOT = 118,
+ MIPI_DSI_PHY_REF_CLK_ROOT = 119,
+ MIPI_DSI_DBI_CLK_ROOT = 120,
+ USDHC3_CLK_ROOT = 121,
+ MIPI_CSI1_CORE_CLK_ROOT = 122,
+ MIPI_CSI1_PHY_REF_CLK_ROOT = 123,
+ MIPI_CSI1_ESC_CLK_ROOT = 124,
+ MIPI_CSI2_CORE_CLK_ROOT = 125,
+ MIPI_CSI2_PHY_REF_CLK_ROOT = 126,
+ MIPI_CSI2_ESC_CLK_ROOT = 127,
+ PCIE2_CTRL_CLK_ROOT = 128,
+ PCIE2_PHY_CLK_ROOT = 129,
+ PCIE2_AUX_CLK_ROOT = 130,
+ ECSPI3_CLK_ROOT = 131,
+ PDM_CLK_ROOT = 132,
+ VPU_H1_CLK_ROOT = 133,
+ CLK_ROOT_MAX,
+};
+
+enum clk_root_src {
+ OSC_24M_CLK,
+ ARM_PLL_CLK,
+ DRAM_PLL1_CLK,
+ VIDEO_PLL2_CLK,
+ VPU_PLL_CLK,
+ GPU_PLL_CLK,
+ SYSTEM_PLL1_800M_CLK,
+ SYSTEM_PLL1_400M_CLK,
+ SYSTEM_PLL1_266M_CLK,
+ SYSTEM_PLL1_200M_CLK,
+ SYSTEM_PLL1_160M_CLK,
+ SYSTEM_PLL1_133M_CLK,
+ SYSTEM_PLL1_100M_CLK,
+ SYSTEM_PLL1_80M_CLK,
+ SYSTEM_PLL1_40M_CLK,
+ SYSTEM_PLL2_1000M_CLK,
+ SYSTEM_PLL2_500M_CLK,
+ SYSTEM_PLL2_333M_CLK,
+ SYSTEM_PLL2_250M_CLK,
+ SYSTEM_PLL2_200M_CLK,
+ SYSTEM_PLL2_166M_CLK,
+ SYSTEM_PLL2_125M_CLK,
+ SYSTEM_PLL2_100M_CLK,
+ SYSTEM_PLL2_50M_CLK,
+ SYSTEM_PLL3_CLK,
+ AUDIO_PLL1_CLK,
+ AUDIO_PLL2_CLK,
+ VIDEO_PLL_CLK,
+ OSC_32K_CLK,
+ EXT_CLK_1,
+ EXT_CLK_2,
+ EXT_CLK_3,
+ EXT_CLK_4,
+ OSC_HDMI_CLK
+};
+
+enum clk_ccgr_index {
+ CCGR_DVFS = 0,
+ CCGR_ANAMIX = 1,
+ CCGR_CPU = 2,
+ CCGR_CSU = 3,
+ CCGR_DEBUG = 4,
+ CCGR_DDR1 = 5,
+ CCGR_ECSPI1 = 7,
+ CCGR_ECSPI2 = 8,
+ CCGR_ECSPI3 = 9,
+ CCGR_ENET1 = 10,
+ CCGR_GPIO1 = 11,
+ CCGR_GPIO2 = 12,
+ CCGR_GPIO3 = 13,
+ CCGR_GPIO4 = 14,
+ CCGR_GPIO5 = 15,
+ CCGR_GPT1 = 16,
+ CCGR_GPT2 = 17,
+ CCGR_GPT3 = 18,
+ CCGR_GPT4 = 19,
+ CCGR_GPT5 = 20,
+ CCGR_GPT6 = 21,
+ CCGR_HS = 22,
+ CCGR_I2C1 = 23,
+ CCGR_I2C2 = 24,
+ CCGR_I2C3 = 25,
+ CCGR_I2C4 = 26,
+ CCGR_IOMUX = 27,
+ CCGR_IOMUX1 = 28,
+ CCGR_IOMUX2 = 29,
+ CCGR_IOMUX3 = 30,
+ CCGR_IOMUX4 = 31,
+ CCGR_SNVSMIX_IPG_CLK = 32,
+ CCGR_MU = 33,
+ CCGR_OCOTP = 34,
+ CCGR_OCRAM = 35,
+ CCGR_OCRAM_S = 36,
+ CCGR_PCIE = 37,
+ CCGR_PERFMON1 = 38,
+ CCGR_PERFMON2 = 39,
+ CCGR_PWM1 = 40,
+ CCGR_PWM2 = 41,
+ CCGR_PWM3 = 42,
+ CCGR_PWM4 = 43,
+ CCGR_QOS = 44,
+ CCGR_QOS_DISPMIX = 45,
+ CCGR_QOS_ETHENET = 46,
+ CCGR_QSPI = 47,
+ CCGR_RAWNAND = 48,
+ CCGR_RDC = 49,
+ CCGR_ROM = 50,
+ CCGR_SAI1 = 51,
+ CCGR_SAI2 = 52,
+ CCGR_SAI3 = 53,
+ CCGR_SAI4 = 54,
+ CCGR_SAI5 = 55,
+ CCGR_SAI6 = 56,
+ CCGR_SCTR = 57,
+ CCGR_SDMA1 = 58,
+ CCGR_SDMA2 = 59,
+ CCGR_SEC_DEBUG = 60,
+ CCGR_SEMA1 = 61,
+ CCGR_SEMA2 = 62,
+ CCGR_SIM_DISPLAY = 63,
+ CCGR_SIM_ENET = 64,
+ CCGR_SIM_M = 65,
+ CCGR_SIM_MAIN = 66,
+ CCGR_SIM_S = 67,
+ CCGR_SIM_WAKEUP = 68,
+ CCGR_SIM_HSIO = 69,
+ CCGR_SIM_VPU = 70,
+ CCGR_SNVS = 71,
+ CCGR_TRACE = 72,
+ CCGR_UART1 = 73,
+ CCGR_UART2 = 74,
+ CCGR_UART3 = 75,
+ CCGR_UART4 = 76,
+ CCGR_USB_MSCALE_PL301 = 77,
+ CCGR_GPU3D = 79,
+ CCGR_USDHC1 = 81,
+ CCGR_USDHC2 = 82,
+ CCGR_WDOG1 = 83,
+ CCGR_WDOG2 = 84,
+ CCGR_WDOG3 = 85,
+ CCGR_VPUG1 = 86,
+ CCGR_GPU_BUS = 87,
+ CCGR_VPUH1 = 89,
+ CCGR_VPUG2 = 90,
+ CCGR_PDM = 91,
+ CCGR_GIC = 92,
+ CCGR_DISPMIX = 93,
+ CCGR_USDHC3 = 94,
+ CCGR_SDMA3 = 95,
+ CCGR_XTAL = 96,
+ CCGR_PLL = 97,
+ CCGR_TEMP_SENSOR = 98,
+ CCGR_VPUMIX_BUS = 99,
+ CCGR_GPU2D = 102,
+ CCGR_MAX
+};
+
+enum clk_src_index {
+ CLK_SRC_CKIL_SYNC_REQ = 0,
+ CLK_SRC_ARM_PLL_EN = 1,
+ CLK_SRC_GPU_PLL_EN = 2,
+ CLK_SRC_VPU_PLL_EN = 3,
+ CLK_SRC_DRAM_PLL_EN = 4,
+ CLK_SRC_SYSTEM_PLL1_EN = 5,
+ CLK_SRC_SYSTEM_PLL2_EN = 6,
+ CLK_SRC_SYSTEM_PLL3_EN = 7,
+ CLK_SRC_AUDIO_PLL1_EN = 8,
+ CLK_SRC_AUDIO_PLL2_EN = 9,
+ CLK_SRC_VIDEO_PLL1_EN = 10,
+ CLK_SRC_RESERVED = 11,
+ CLK_SRC_ARM_PLL = 12,
+ CLK_SRC_GPU_PLL = 13,
+ CLK_SRC_VPU_PLL = 14,
+ CLK_SRC_DRAM_PLL = 15,
+ CLK_SRC_SYSTEM_PLL1_800M = 16,
+ CLK_SRC_SYSTEM_PLL1_400M = 17,
+ CLK_SRC_SYSTEM_PLL1_266M = 18,
+ CLK_SRC_SYSTEM_PLL1_200M = 19,
+ CLK_SRC_SYSTEM_PLL1_160M = 20,
+ CLK_SRC_SYSTEM_PLL1_133M = 21,
+ CLK_SRC_SYSTEM_PLL1_100M = 22,
+ CLK_SRC_SYSTEM_PLL1_80M = 23,
+ CLK_SRC_SYSTEM_PLL1_40M = 24,
+ CLK_SRC_SYSTEM_PLL2_1000M = 25,
+ CLK_SRC_SYSTEM_PLL2_500M = 26,
+ CLK_SRC_SYSTEM_PLL2_333M = 27,
+ CLK_SRC_SYSTEM_PLL2_250M = 28,
+ CLK_SRC_SYSTEM_PLL2_200M = 29,
+ CLK_SRC_SYSTEM_PLL2_166M = 30,
+ CLK_SRC_SYSTEM_PLL2_125M = 31,
+ CLK_SRC_SYSTEM_PLL2_100M = 32,
+ CLK_SRC_SYSTEM_PLL2_50M = 33,
+ CLK_SRC_SYSTEM_PLL3 = 34,
+ CLK_SRC_AUDIO_PLL1 = 35,
+ CLK_SRC_AUDIO_PLL2 = 36,
+ CLK_SRC_VIDEO_PLL1 = 37,
+};
+
+#define INTPLL_LOCK_MASK BIT(31)
+#define INTPLL_LOCK_SEL_MASK BIT(29)
+#define INTPLL_EXT_BYPASS_MASK BIT(28)
+#define INTPLL_DIV20_CLKE_MASK BIT(27)
+#define INTPLL_DIV20_CLKE_OVERRIDE_MASK BIT(26)
+#define INTPLL_DIV10_CLKE_MASK BIT(25)
+#define INTPLL_DIV10_CLKE_OVERRIDE_MASK BIT(24)
+#define INTPLL_DIV8_CLKE_MASK BIT(23)
+#define INTPLL_DIV8_CLKE_OVERRIDE_MASK BIT(22)
+#define INTPLL_DIV6_CLKE_MASK BIT(21)
+#define INTPLL_DIV6_CLKE_OVERRIDE_MASK BIT(20)
+#define INTPLL_DIV5_CLKE_MASK BIT(19)
+#define INTPLL_DIV5_CLKE_OVERRIDE_MASK BIT(18)
+#define INTPLL_DIV4_CLKE_MASK BIT(17)
+#define INTPLL_DIV4_CLKE_OVERRIDE_MASK BIT(16)
+#define INTPLL_DIV3_CLKE_MASK BIT(15)
+#define INTPLL_DIV3_CLKE_OVERRIDE_MASK BIT(14)
+#define INTPLL_DIV2_CLKE_MASK BIT(13)
+#define INTPLL_DIV2_CLKE_OVERRIDE_MASK BIT(12)
+#define INTPLL_CLKE_MASK BIT(11)
+#define INTPLL_CLKE_OVERRIDE_MASK BIT(10)
+#define INTPLL_RST_MASK BIT(9)
+#define INTPLL_RST_OVERRIDE_MASK BIT(8)
+#define INTPLL_BYPASS_MASK BIT(4)
+#define INTPLL_PAD_CLK_SEL_MASK GENMASK(3, 2)
+#define INTPLL_REF_CLK_SEL_MASK GENMASK(1, 0)
+
+#define INTPLL_MAIN_DIV_MASK GENMASK(21, 12)
+#define INTPLL_MAIN_DIV_VAL(n) ((n << 12) & GENMASK(21, 12))
+#define INTPLL_MAIN_DIV_SHIFT 12
+#define INTPLL_PRE_DIV_MASK GENMASK(9, 4)
+#define INTPLL_PRE_DIV_VAL(n) ((n << 4) & GENMASK(9, 4))
+#define INTPLL_PRE_DIV_SHIFT 4
+#define INTPLL_POST_DIV_MASK GENMASK(2, 0)
+#define INTPLL_POST_DIV_VAL(n) ((n << 0) & GENMASK(2, 0))
+#define INTPLL_POST_DIV_SHIFT 0
+
+#define INTPLL_LOCK_CON_DLY_MASK GENMASK(5, 4)
+#define INTPLL_LOCK_CON_DLY_SHIFT 4
+#define INTPLL_LOCK_CON_OUT_MASK GENMASK(3, 2)
+#define INTPLL_LOCK_CON_OUT_SHIFT 2
+#define INTPLL_LOCK_CON_IN_MASK GENMASK(1, 0)
+#define INTPLL_LOCK_CON_IN_SHIFT 0
+
+#define INTPLL_LRD_EN_MASK BIT(21)
+#define INTPLL_FOUT_MASK BIT(20)
+#define INTPLL_AFC_SEL_MASK BIT(19)
+#define INTPLL_PBIAS_CTRL_MASK BIT(18)
+#define INTPLL_PBIAS_CTRL_EN_MASK BIT(17)
+#define INTPLL_AFCINIT_SEL_MASK BIT(16)
+#define INTPLL_FSEL_MASK BIT(14)
+#define INTPLL_FEED_EN_MASK BIT(13)
+#define INTPLL_EXTAFC_MASK GENMASK(7, 3)
+#define INTPLL_AFC_EN_MASK BIT(2)
+#define INTPLL_ICP_MASK GENMASK(1, 0)
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017 NXP
+ *
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+#ifndef _ASM_ARCH_IMX8M_CLOCK_H
+#define _ASM_ARCH_IMX8M_CLOCK_H
+
+enum pll_clocks {
+ ANATOP_ARM_PLL,
+ ANATOP_GPU_PLL,
+ ANATOP_SYSTEM_PLL1,
+ ANATOP_SYSTEM_PLL2,
+ ANATOP_SYSTEM_PLL3,
+ ANATOP_AUDIO_PLL1,
+ ANATOP_AUDIO_PLL2,
+ ANATOP_VIDEO_PLL1,
+ ANATOP_VIDEO_PLL2,
+ ANATOP_DRAM_PLL,
+};
+
+enum clk_root_index {
+ ARM_A53_CLK_ROOT = 0,
+ ARM_M4_CLK_ROOT = 1,
+ VPU_A53_CLK_ROOT = 2,
+ GPU_CORE_CLK_ROOT = 3,
+ GPU_SHADER_CLK_ROOT = 4,
+ MAIN_AXI_CLK_ROOT = 16,
+ ENET_AXI_CLK_ROOT = 17,
+ NAND_USDHC_BUS_CLK_ROOT = 18,
+ VPU_BUS_CLK_ROOT = 19,
+ DISPLAY_AXI_CLK_ROOT = 20,
+ DISPLAY_APB_CLK_ROOT = 21,
+ DISPLAY_RTRM_CLK_ROOT = 22,
+ USB_BUS_CLK_ROOT = 23,
+ GPU_AXI_CLK_ROOT = 24,
+ GPU_AHB_CLK_ROOT = 25,
+ NOC_CLK_ROOT = 26,
+ NOC_APB_CLK_ROOT = 27,
+ AHB_CLK_ROOT = 32,
+ IPG_CLK_ROOT = 33,
+ AUDIO_AHB_CLK_ROOT = 34,
+ MIPI_DSI_ESC_RX_CLK_ROOT = 36,
+ DRAM_SEL_CFG = 48,
+ CORE_SEL_CFG = 49,
+ DRAM_ALT_CLK_ROOT = 64,
+ DRAM_APB_CLK_ROOT = 65,
+ VPU_G1_CLK_ROOT = 66,
+ VPU_G2_CLK_ROOT = 67,
+ DISPLAY_DTRC_CLK_ROOT = 68,
+ DISPLAY_DC8000_CLK_ROOT = 69,
+ PCIE1_CTRL_CLK_ROOT = 70,
+ PCIE1_PHY_CLK_ROOT = 71,
+ PCIE1_AUX_CLK_ROOT = 72,
+ DC_PIXEL_CLK_ROOT = 73,
+ LCDIF_PIXEL_CLK_ROOT = 74,
+ SAI1_CLK_ROOT = 75,
+ SAI2_CLK_ROOT = 76,
+ SAI3_CLK_ROOT = 77,
+ SAI4_CLK_ROOT = 78,
+ SAI5_CLK_ROOT = 79,
+ SAI6_CLK_ROOT = 80,
+ SPDIF1_CLK_ROOT = 81,
+ SPDIF2_CLK_ROOT = 82,
+ ENET_REF_CLK_ROOT = 83,
+ ENET_TIMER_CLK_ROOT = 84,
+ ENET_PHY_REF_CLK_ROOT = 85,
+ NAND_CLK_ROOT = 86,
+ QSPI_CLK_ROOT = 87,
+ USDHC1_CLK_ROOT = 88,
+ USDHC2_CLK_ROOT = 89,
+ I2C1_CLK_ROOT = 90,
+ I2C2_CLK_ROOT = 91,
+ I2C3_CLK_ROOT = 92,
+ I2C4_CLK_ROOT = 93,
+ UART1_CLK_ROOT = 94,
+ UART2_CLK_ROOT = 95,
+ UART3_CLK_ROOT = 96,
+ UART4_CLK_ROOT = 97,
+ USB_CORE_REF_CLK_ROOT = 98,
+ USB_PHY_REF_CLK_ROOT = 99,
+ GIC_CLK_ROOT = 100,
+ ECSPI1_CLK_ROOT = 101,
+ ECSPI2_CLK_ROOT = 102,
+ PWM1_CLK_ROOT = 103,
+ PWM2_CLK_ROOT = 104,
+ PWM3_CLK_ROOT = 105,
+ PWM4_CLK_ROOT = 106,
+ GPT1_CLK_ROOT = 107,
+ GPT2_CLK_ROOT = 108,
+ GPT3_CLK_ROOT = 109,
+ GPT4_CLK_ROOT = 110,
+ GPT5_CLK_ROOT = 111,
+ GPT6_CLK_ROOT = 112,
+ TRACE_CLK_ROOT = 113,
+ WDOG_CLK_ROOT = 114,
+ WRCLK_CLK_ROOT = 115,
+ IPP_DO_CLKO1 = 116,
+ IPP_DO_CLKO2 = 117,
+ MIPI_DSI_CORE_CLK_ROOT = 118,
+ MIPI_DSI_PHY_REF_CLK_ROOT = 119,
+ MIPI_DSI_DBI_CLK_ROOT = 120,
+ OLD_MIPI_DSI_ESC_CLK_ROOT = 121,
+ MIPI_CSI1_CORE_CLK_ROOT = 122,
+ MIPI_CSI1_PHY_REF_CLK_ROOT = 123,
+ MIPI_CSI1_ESC_CLK_ROOT = 124,
+ MIPI_CSI2_CORE_CLK_ROOT = 125,
+ MIPI_CSI2_PHY_REF_CLK_ROOT = 126,
+ MIPI_CSI2_ESC_CLK_ROOT = 127,
+ PCIE2_CTRL_CLK_ROOT = 128,
+ PCIE2_PHY_CLK_ROOT = 129,
+ PCIE2_AUX_CLK_ROOT = 130,
+ ECSPI3_CLK_ROOT = 131,
+ OLD_MIPI_DSI_ESC_RX_ROOT = 132,
+ DISPLAY_HDMI_CLK_ROOT = 133,
+ CLK_ROOT_MAX,
+};
+
+enum clk_root_src {
+ OSC_25M_CLK,
+ ARM_PLL_CLK,
+ DRAM_PLL1_CLK,
+ VIDEO_PLL2_CLK,
+ VPU_PLL_CLK,
+ GPU_PLL_CLK,
+ SYSTEM_PLL1_800M_CLK,
+ SYSTEM_PLL1_400M_CLK,
+ SYSTEM_PLL1_266M_CLK,
+ SYSTEM_PLL1_200M_CLK,
+ SYSTEM_PLL1_160M_CLK,
+ SYSTEM_PLL1_133M_CLK,
+ SYSTEM_PLL1_100M_CLK,
+ SYSTEM_PLL1_80M_CLK,
+ SYSTEM_PLL1_40M_CLK,
+ SYSTEM_PLL2_1000M_CLK,
+ SYSTEM_PLL2_500M_CLK,
+ SYSTEM_PLL2_333M_CLK,
+ SYSTEM_PLL2_250M_CLK,
+ SYSTEM_PLL2_200M_CLK,
+ SYSTEM_PLL2_166M_CLK,
+ SYSTEM_PLL2_125M_CLK,
+ SYSTEM_PLL2_100M_CLK,
+ SYSTEM_PLL2_50M_CLK,
+ SYSTEM_PLL3_CLK,
+ AUDIO_PLL1_CLK,
+ AUDIO_PLL2_CLK,
+ VIDEO_PLL_CLK,
+ OSC_32K_CLK,
+ EXT_CLK_1,
+ EXT_CLK_2,
+ EXT_CLK_3,
+ EXT_CLK_4,
+ OSC_27M_CLK,
+};
+
+/* CCGR index */
+enum clk_ccgr_index {
+ CCGR_DVFS = 0,
+ CCGR_ANAMIX = 1,
+ CCGR_CPU = 2,
+ CCGR_CSU = 4,
+ CCGR_DRAM1 = 5,
+ CCGR_DRAM2_OBSOLETE = 6,
+ CCGR_ECSPI1 = 7,
+ CCGR_ECSPI2 = 8,
+ CCGR_ECSPI3 = 9,
+ CCGR_ENET1 = 10,
+ CCGR_GPIO1 = 11,
+ CCGR_GPIO2 = 12,
+ CCGR_GPIO3 = 13,
+ CCGR_GPIO4 = 14,
+ CCGR_GPIO5 = 15,
+ CCGR_GPT1 = 16,
+ CCGR_GPT2 = 17,
+ CCGR_GPT3 = 18,
+ CCGR_GPT4 = 19,
+ CCGR_GPT5 = 20,
+ CCGR_GPT6 = 21,
+ CCGR_HS = 22,
+ CCGR_I2C1 = 23,
+ CCGR_I2C2 = 24,
+ CCGR_I2C3 = 25,
+ CCGR_I2C4 = 26,
+ CCGR_IOMUX = 27,
+ CCGR_IOMUX1 = 28,
+ CCGR_IOMUX2 = 29,
+ CCGR_IOMUX3 = 30,
+ CCGR_IOMUX4 = 31,
+ CCGR_M4 = 32,
+ CCGR_MU = 33,
+ CCGR_OCOTP = 34,
+ CCGR_OCRAM = 35,
+ CCGR_OCRAM_S = 36,
+ CCGR_PCIE = 37,
+ CCGR_PERFMON1 = 38,
+ CCGR_PERFMON2 = 39,
+ CCGR_PWM1 = 40,
+ CCGR_PWM2 = 41,
+ CCGR_PWM3 = 42,
+ CCGR_PWM4 = 43,
+ CCGR_QOS = 44,
+ CCGR_DISMIX = 45,
+ CCGR_MEGAMIX = 46,
+ CCGR_QSPI = 47,
+ CCGR_RAWNAND = 48,
+ CCGR_RDC = 49,
+ CCGR_ROM = 50,
+ CCGR_SAI1 = 51,
+ CCGR_SAI2 = 52,
+ CCGR_SAI3 = 53,
+ CCGR_SAI4 = 54,
+ CCGR_SAI5 = 55,
+ CCGR_SAI6 = 56,
+ CCGR_SCTR = 57,
+ CCGR_SDMA1 = 58,
+ CCGR_SDMA2 = 59,
+ CCGR_SEC_DEBUG = 60,
+ CCGR_SEMA1 = 61,
+ CCGR_SEMA2 = 62,
+ CCGR_SIM_DISPLAY = 63,
+ CCGR_SIM_ENET = 64,
+ CCGR_SIM_M = 65,
+ CCGR_SIM_MAIN = 66,
+ CCGR_SIM_S = 67,
+ CCGR_SIM_WAKEUP = 68,
+ CCGR_SIM_USB = 69,
+ CCGR_SIM_VPU = 70,
+ CCGR_SNVS = 71,
+ CCGR_TRACE = 72,
+ CCGR_UART1 = 73,
+ CCGR_UART2 = 74,
+ CCGR_UART3 = 75,
+ CCGR_UART4 = 76,
+ CCGR_USB_CTRL1 = 77,
+ CCGR_USB_CTRL2 = 78,
+ CCGR_USB_PHY1 = 79,
+ CCGR_USB_PHY2 = 80,
+ CCGR_USDHC1 = 81,
+ CCGR_USDHC2 = 82,
+ CCGR_WDOG1 = 83,
+ CCGR_WDOG2 = 84,
+ CCGR_WDOG3 = 85,
+ CCGR_VA53 = 86,
+ CCGR_GPU = 87,
+ CCGR_HEVC = 88,
+ CCGR_AVC = 89,
+ CCGR_VP9 = 90,
+ CCGR_HEVC_INTER = 91,
+ CCGR_GIC = 92,
+ CCGR_DISPLAY = 93,
+ CCGR_HDMI = 94,
+ CCGR_HDMI_PHY = 95,
+ CCGR_XTAL = 96,
+ CCGR_PLL = 97,
+ CCGR_TSENSOR = 98,
+ CCGR_VPU_DEC = 99,
+ CCGR_PCIE2 = 100,
+ CCGR_MIPI_CSI1 = 101,
+ CCGR_MIPI_CSI2 = 102,
+ CCGR_MAX,
+};
+
+/* src index */
+enum clk_src_index {
+ CLK_SRC_CKIL_SYNC_REQ = 0,
+ CLK_SRC_ARM_PLL_EN = 1,
+ CLK_SRC_GPU_PLL_EN = 2,
+ CLK_SRC_VPU_PLL_EN = 3,
+ CLK_SRC_DRAM_PLL_EN = 4,
+ CLK_SRC_SYSTEM_PLL1_EN = 5,
+ CLK_SRC_SYSTEM_PLL2_EN = 6,
+ CLK_SRC_SYSTEM_PLL3_EN = 7,
+ CLK_SRC_AUDIO_PLL1_EN = 8,
+ CLK_SRC_AUDIO_PLL2_EN = 9,
+ CLK_SRC_VIDEO_PLL1_EN = 10,
+ CLK_SRC_VIDEO_PLL2_EN = 11,
+ CLK_SRC_ARM_PLL = 12,
+ CLK_SRC_GPU_PLL = 13,
+ CLK_SRC_VPU_PLL = 14,
+ CLK_SRC_DRAM_PLL = 15,
+ CLK_SRC_SYSTEM_PLL1_800M = 16,
+ CLK_SRC_SYSTEM_PLL1_400M = 17,
+ CLK_SRC_SYSTEM_PLL1_266M = 18,
+ CLK_SRC_SYSTEM_PLL1_200M = 19,
+ CLK_SRC_SYSTEM_PLL1_160M = 20,
+ CLK_SRC_SYSTEM_PLL1_133M = 21,
+ CLK_SRC_SYSTEM_PLL1_100M = 22,
+ CLK_SRC_SYSTEM_PLL1_80M = 23,
+ CLK_SRC_SYSTEM_PLL1_40M = 24,
+ CLK_SRC_SYSTEM_PLL2_1000M = 25,
+ CLK_SRC_SYSTEM_PLL2_500M = 26,
+ CLK_SRC_SYSTEM_PLL2_333M = 27,
+ CLK_SRC_SYSTEM_PLL2_250M = 28,
+ CLK_SRC_SYSTEM_PLL2_200M = 29,
+ CLK_SRC_SYSTEM_PLL2_166M = 30,
+ CLK_SRC_SYSTEM_PLL2_125M = 31,
+ CLK_SRC_SYSTEM_PLL2_100M = 32,
+ CLK_SRC_SYSTEM_PLL2_50M = 33,
+ CLK_SRC_SYSTEM_PLL3 = 34,
+ CLK_SRC_AUDIO_PLL1 = 35,
+ CLK_SRC_AUDIO_PLL2 = 36,
+ CLK_SRC_VIDEO_PLL1 = 37,
+ CLK_SRC_VIDEO_PLL2 = 38,
+ CLK_SRC_OSC_25M = 39,
+ CLK_SRC_OSC_27M = 40,
+};
+
+/* AUDIO PLL1/2 VIDEO PLL1 GPU PLL VPU PLL ARM PLL*/
+#define FRAC_PLL_LOCK_MASK BIT(31)
+#define FRAC_PLL_CLKE_MASK BIT(21)
+#define FRAC_PLL_PD_MASK BIT(19)
+#define FRAC_PLL_REFCLK_SEL_MASK BIT(16)
+#define FRAC_PLL_LOCK_SEL_MASK BIT(15)
+#define FRAC_PLL_BYPASS_MASK BIT(14)
+#define FRAC_PLL_COUNTCLK_SEL_MASK BIT(13)
+#define FRAC_PLL_NEWDIV_VAL_MASK BIT(12)
+#define FRAC_PLL_NEWDIV_ACK_MASK BIT(11)
+#define FRAC_PLL_REFCLK_DIV_VAL(n) (((n) << 5) & (0x3f << 5))
+#define FRAC_PLL_REFCLK_DIV_VAL_MASK (0x3f << 5)
+#define FRAC_PLL_REFCLK_DIV_VAL_SHIFT 5
+#define FRAC_PLL_OUTPUT_DIV_VAL_MASK 0x1f
+#define FRAC_PLL_OUTPUT_DIV_VAL(n) ((n) & 0x1f)
+
+#define FRAC_PLL_REFCLK_SEL_OSC_25M (0 << 16)
+#define FRAC_PLL_REFCLK_SEL_OSC_27M BIT(16)
+#define FRAC_PLL_REFCLK_SEL_HDMI_PHY_27M (2 << 16)
+#define FRAC_PLL_REFCLK_SEL_CLK_PN (3 << 16)
+
+#define FRAC_PLL_FRAC_DIV_CTL_MASK (0x1ffffff << 7)
+#define FRAC_PLL_FRAC_DIV_CTL_SHIFT 7
+#define FRAC_PLL_INT_DIV_CTL_MASK 0x7f
+#define FRAC_PLL_INT_DIV_CTL_VAL(n) ((n) & 0x7f)
+
+/* SYS PLL1/2/3 VIDEO PLL2 DRAM PLL */
+#define SSCG_PLL_LOCK_MASK BIT(31)
+#define SSCG_PLL_CLKE_MASK BIT(25)
+#define SSCG_PLL_DIV2_CLKE_MASK BIT(23)
+#define SSCG_PLL_DIV3_CLKE_MASK BIT(21)
+#define SSCG_PLL_DIV4_CLKE_MASK BIT(19)
+#define SSCG_PLL_DIV5_CLKE_MASK BIT(17)
+#define SSCG_PLL_DIV6_CLKE_MASK BIT(15)
+#define SSCG_PLL_DIV8_CLKE_MASK BIT(13)
+#define SSCG_PLL_DIV10_CLKE_MASK BIT(11)
+#define SSCG_PLL_DIV20_CLKE_MASK BIT(9)
+#define SSCG_PLL_VIDEO_PLL2_CLKE_MASK BIT(9)
+#define SSCG_PLL_DRAM_PLL_CLKE_MASK BIT(9)
+#define SSCG_PLL_PLL3_CLKE_MASK BIT(9)
+#define SSCG_PLL_PD_MASK BIT(7)
+#define SSCG_PLL_BYPASS1_MASK BIT(5)
+#define SSCG_PLL_BYPASS2_MASK BIT(4)
+#define SSCG_PLL_LOCK_SEL_MASK BIT(3)
+#define SSCG_PLL_COUNTCLK_SEL_MASK BIT(2)
+#define SSCG_PLL_REFCLK_SEL_MASK 0x3
+#define SSCG_PLL_REFCLK_SEL_OSC_25M (0 << 16)
+#define SSCG_PLL_REFCLK_SEL_OSC_27M BIT(16)
+#define SSCG_PLL_REFCLK_SEL_HDMI_PHY_27M (2 << 16)
+#define SSCG_PLL_REFCLK_SEL_CLK_PN (3 << 16)
+
+#define SSCG_PLL_SSDS_MASK BIT(8)
+#define SSCG_PLL_SSMD_MASK (0x7 << 5)
+#define SSCG_PLL_SSMF_MASK (0xf << 1)
+#define SSCG_PLL_SSE_MASK 0x1
+
+#define SSCG_PLL_REF_DIVR1_MASK (0x7 << 25)
+#define SSCG_PLL_REF_DIVR1_SHIFT 25
+#define SSCG_PLL_REF_DIVR1_VAL(n) (((n) << 25) & SSCG_PLL_REF_DIVR1_MASK)
+#define SSCG_PLL_REF_DIVR2_MASK (0x3f << 19)
+#define SSCG_PLL_REF_DIVR2_SHIFT 19
+#define SSCG_PLL_REF_DIVR2_VAL(n) (((n) << 19) & SSCG_PLL_REF_DIVR2_MASK)
+#define SSCG_PLL_FEEDBACK_DIV_F1_MASK (0x3f << 13)
+#define SSCG_PLL_FEEDBACK_DIV_F1_SHIFT 13
+#define SSCG_PLL_FEEDBACK_DIV_F1_VAL(n) (((n) << 13) & \
+ SSCG_PLL_FEEDBACK_DIV_F1_MASK)
+#define SSCG_PLL_FEEDBACK_DIV_F2_MASK (0x3f << 7)
+#define SSCG_PLL_FEEDBACK_DIV_F2_SHIFT 7
+#define SSCG_PLL_FEEDBACK_DIV_F2_VAL(n) (((n) << 7) & \
+ SSCG_PLL_FEEDBACK_DIV_F2_MASK)
+#define SSCG_PLL_OUTPUT_DIV_VAL_MASK (0x3f << 1)
+#define SSCG_PLL_OUTPUT_DIV_VAL_SHIFT 1
+#define SSCG_PLL_OUTPUT_DIV_VAL(n) (((n) << 1) & \
+ SSCG_PLL_OUTPUT_DIV_VAL_MASK)
+#define SSCG_PLL_FILTER_RANGE_MASK 0x1
+
+#define HW_DIGPROG_MAJOR_UPPER_MASK (0xff << 16)
+#define HW_DIGPROG_MAJOR_LOWER_MASK (0xff << 8)
+#define HW_DIGPROG_MINOR_MASK 0xff
+
+#define HW_OSC_27M_CLKE_MASK BIT(4)
+#define HW_OSC_25M_CLKE_MASK BIT(2)
+#define HW_OSC_32K_SEL_MASK 0x1
+#define HW_OSC_32K_SEL_RTC 0x1
+#define HW_OSC_32K_SEL_25M_DIV800 0x0
+
+#define HW_FRAC_ARM_PLL_DIV_MASK (0x7 << 20)
+#define HW_FRAC_ARM_PLL_DIV_SHIFT 20
+#define HW_FRAC_VPU_PLL_DIV_MASK (0x7 << 16)
+#define HW_FRAC_VPU_PLL_DIV_SHIFT 16
+#define HW_FRAC_GPU_PLL_DIV_MASK (0x7 << 12)
+#define HW_FRAC_GPU_PLL_DIV_SHIFT 12
+#define HW_FRAC_VIDEO_PLL1_DIV_MASK (0x7 << 10)
+#define HW_FRAC_VIDEO_PLL1_DIV_SHIFT 10
+#define HW_FRAC_AUDIO_PLL2_DIV_MASK (0x7 << 4)
+#define HW_FRAC_AUDIO_PLL2_DIV_SHIFT 4
+#define HW_FRAC_AUDIO_PLL1_DIV_MASK 0x7
+#define HW_FRAC_AUDIO_PLL1_DIV_SHIFT 0
+
+#define HW_SSCG_VIDEO_PLL2_DIV_MASK (0x7 << 16)
+#define HW_SSCG_VIDEO_PLL2_DIV_SHIFT 16
+#define HW_SSCG_DRAM_PLL_DIV_MASK (0x7 << 14)
+#define HW_SSCG_DRAM_PLL_DIV_SHIFT 14
+#define HW_SSCG_SYSTEM_PLL3_DIV_MASK (0x7 << 8)
+#define HW_SSCG_SYSTEM_PLL3_DIV_SHIFT 8
+#define HW_SSCG_SYSTEM_PLL2_DIV_MASK (0x7 << 4)
+#define HW_SSCG_SYSTEM_PLL2_DIV_SHIFT 4
+#define HW_SSCG_SYSTEM_PLL1_DIV_MASK 0x7
+#define HW_SSCG_SYSTEM_PLL1_DIV_SHIFT 0
+
+enum frac_pll_out_val {
+ FRAC_PLL_OUT_1000M,
+ FRAC_PLL_OUT_1600M,
+};
+#endif
#include <asm/mach-imx/regs-lcdif.h>
-#define ROM_VERSION_A0 0x800
-#define ROM_VERSION_B0 0x83C
+#define ROM_VERSION_A0 IS_ENABLED(CONFIG_IMX8MQ) ? 0x800 : 0x800
+#define ROM_VERSION_B0 IS_ENABLED(CONFIG_IMX8MQ) ? 0x83C : 0x800
-#define M4_BOOTROM_BASE_ADDR 0x007E0000
+#define M4_BOOTROM_BASE_ADDR 0x007E0000
-#define SAI1_BASE_ADDR 0x30010000
-#define SAI6_BASE_ADDR 0x30030000
-#define SAI5_BASE_ADDR 0x30040000
-#define SAI4_BASE_ADDR 0x30050000
-#define SPBA2_BASE_ADDR 0x300F0000
-#define AIPS1_BASE_ADDR 0x301F0000
#define GPIO1_BASE_ADDR 0X30200000
#define GPIO2_BASE_ADDR 0x30210000
#define GPIO3_BASE_ADDR 0x30220000
#define GPIO4_BASE_ADDR 0x30230000
#define GPIO5_BASE_ADDR 0x30240000
-#define ANA_TSENSOR_BASE_ADDR 0x30260000
-#define ANA_OSC_BASE_ADDR 0x30270000
#define WDOG1_BASE_ADDR 0x30280000
#define WDOG2_BASE_ADDR 0x30290000
#define WDOG3_BASE_ADDR 0x302A0000
-#define SDMA2_BASE_ADDR 0x302C0000
-#define GPT1_BASE_ADDR 0x302D0000
-#define GPT2_BASE_ADDR 0x302E0000
-#define GPT3_BASE_ADDR 0x302F0000
-#define ROMCP_BASE_ADDR 0x30310000
-#define LCDIF_BASE_ADDR 0x30320000
#define IOMUXC_BASE_ADDR 0x30330000
#define IOMUXC_GPR_BASE_ADDR 0x30340000
#define OCOTP_BASE_ADDR 0x30350000
#define ANATOP_BASE_ADDR 0x30360000
-#define SNVS_HP_BASE_ADDR 0x30370000
#define CCM_BASE_ADDR 0x30380000
#define SRC_BASE_ADDR 0x30390000
#define GPC_BASE_ADDR 0x303A0000
-#define SEMAPHORE1_BASE_ADDR 0x303B0000
-#define SEMAPHORE2_BASE_ADDR 0x303C0000
-#define RDC_BASE_ADDR 0x303D0000
-#define CSU_BASE_ADDR 0x303E0000
-#define AIPS2_BASE_ADDR 0x305F0000
-#define PWM1_BASE_ADDR 0x30660000
-#define PWM2_BASE_ADDR 0x30670000
-#define PWM3_BASE_ADDR 0x30680000
-#define PWM4_BASE_ADDR 0x30690000
#define SYSCNT_RD_BASE_ADDR 0x306A0000
#define SYSCNT_CMP_BASE_ADDR 0x306B0000
#define SYSCNT_CTRL_BASE_ADDR 0x306C0000
-#define GPT6_BASE_ADDR 0x306E0000
-#define GPT5_BASE_ADDR 0x306F0000
-#define GPT4_BASE_ADDR 0x30700000
-#define PERFMON1_BASE_ADDR 0x307C0000
-#define PERFMON2_BASE_ADDR 0x307D0000
-#define QOSC_BASE_ADDR 0x307F0000
-#define SPDIF1_BASE_ADDR 0x30810000
-#define ECSPI1_BASE_ADDR 0x30820000
-#define ECSPI2_BASE_ADDR 0x30830000
-#define ECSPI3_BASE_ADDR 0x30840000
#define UART1_BASE_ADDR 0x30860000
#define UART3_BASE_ADDR 0x30880000
#define UART2_BASE_ADDR 0x30890000
-#define SPDIF2_BASE_ADDR 0x308A0000
-#define SAI2_BASE_ADDR 0x308B0000
-#define SAI3_BASE_ADDR 0x308C0000
-#define SPBA1_BASE_ADDR 0x308F0000
-#define CAAM_BASE_ADDR 0x30900000
-#define AIPS3_BASE_ADDR 0x309F0000
-#define MIPI_PHY_BASE_ADDR 0x30A00000
-#define MIPI_DSI_BASE_ADDR 0x30A10000
#define I2C1_BASE_ADDR 0x30A20000
#define I2C2_BASE_ADDR 0x30A30000
#define I2C3_BASE_ADDR 0x30A40000
#define I2C4_BASE_ADDR 0x30A50000
#define UART4_BASE_ADDR 0x30A60000
-#define MIPI_CSI_BASE_ADDR 0x30A70000
-#define MIPI_CSI_PHY1_BASE_ADDR 0x30A80000
-#define CSI1_BASE_ADDR 0x30A90000
-#define MU_A_BASE_ADDR 0x30AA0000
-#define MU_B_BASE_ADDR 0x30AB0000
-#define SEMAPHOR_HS_BASE_ADDR 0x30AC0000
#define USDHC1_BASE_ADDR 0x30B40000
#define USDHC2_BASE_ADDR 0x30B50000
-#define MIPI_CS2_BASE_ADDR 0x30B60000
-#define MIPI_CSI_PHY2_BASE_ADDR 0x30B70000
-#define CSI2_BASE_ADDR 0x30B80000
-#define QSPI0_BASE_ADDR 0x30BB0000
-#define QSPI0_AMBA_BASE 0x08000000
-#define SDMA1_BASE_ADDR 0x30BD0000
-#define ENET1_BASE_ADDR 0x30BE0000
+#ifdef CONFIG_IMX8MM
+#define USDHC3_BASE_ADDR 0x30B60000
+#endif
-#define HDMI_CTRL_BASE_ADDR 0x32C00000
-#define AIPS4_BASE_ADDR 0x32DF0000
-#define DC1_BASE_ADDR 0x32E00000
-#define DC2_BASE_ADDR 0x32E10000
-#define DC3_BASE_ADDR 0x32E20000
-#define HDMI_SEC_BASE_ADDR 0x32E40000
#define TZASC_BASE_ADDR 0x32F80000
-#define MTR_BASE_ADDR 0x32FB0000
-#define PLATFORM_CTRL_BASE_ADDR 0x32FE0000
-
-#define MXS_APBH_BASE 0x33000000
-#define MXS_GPMI_BASE 0x33002000
-#define MXS_BCH_BASE 0x33004000
-
-#define USB1_BASE_ADDR 0x38100000
-#define USB2_BASE_ADDR 0x38200000
-#define USB1_PHY_BASE_ADDR 0x381F0000
-#define USB2_PHY_BASE_ADDR 0x382F0000
-#define MXS_LCDIF_BASE LCDIF_BASE_ADDR
+#define MXS_LCDIF_BASE IS_ENABLED(CONFIG_IMX8MQ) ? \
+ 0x30320000 : 0x32e00000
#define SRC_IPS_BASE_ADDR 0x30390000
#define SRC_DDRC_RCR_ADDR 0x30391000
u32 rsvd3[3];
};
+#ifdef CONFIG_IMX8MQ
struct anamix_pll {
u32 audio_pll1_cfg0;
u32 audio_pll1_cfg1;
u32 frac_pllout_div_cfg;
u32 sscg_pllout_div_cfg;
};
+#else
+struct anamix_pll {
+ u32 audio_pll1_gnrl_ctl;
+ u32 audio_pll1_fdiv_ctl0;
+ u32 audio_pll1_fdiv_ctl1;
+ u32 audio_pll1_sscg_ctl;
+ u32 audio_pll1_mnit_ctl;
+ u32 audio_pll2_gnrl_ctl;
+ u32 audio_pll2_fdiv_ctl0;
+ u32 audio_pll2_fdiv_ctl1;
+ u32 audio_pll2_sscg_ctl;
+ u32 audio_pll2_mnit_ctl;
+ u32 video_pll1_gnrl_ctl;
+ u32 video_pll1_fdiv_ctl0;
+ u32 video_pll1_fdiv_ctl1;
+ u32 video_pll1_sscg_ctl;
+ u32 video_pll1_mnit_ctl;
+ u32 reserved[5];
+ u32 dram_pll_gnrl_ctl;
+ u32 dram_pll_fdiv_ctl0;
+ u32 dram_pll_fdiv_ctl1;
+ u32 dram_pll_sscg_ctl;
+ u32 dram_pll_mnit_ctl;
+ u32 gpu_pll_gnrl_ctl;
+ u32 gpu_pll_div_ctl;
+ u32 gpu_pll_locked_ctl1;
+ u32 gpu_pll_mnit_ctl;
+ u32 vpu_pll_gnrl_ctl;
+ u32 vpu_pll_div_ctl;
+ u32 vpu_pll_locked_ctl1;
+ u32 vpu_pll_mnit_ctl;
+ u32 arm_pll_gnrl_ctl;
+ u32 arm_pll_div_ctl;
+ u32 arm_pll_locked_ctl1;
+ u32 arm_pll_mnit_ctl;
+ u32 sys_pll1_gnrl_ctl;
+ u32 sys_pll1_div_ctl;
+ u32 sys_pll1_locked_ctl1;
+ u32 reserved2[24];
+ u32 sys_pll1_mnit_ctl;
+ u32 sys_pll2_gnrl_ctl;
+ u32 sys_pll2_div_ctl;
+ u32 sys_pll2_locked_ctl1;
+ u32 sys_pll2_mnit_ctl;
+ u32 sys_pll3_gnrl_ctl;
+ u32 sys_pll3_div_ctl;
+ u32 sys_pll3_locked_ctl1;
+ u32 sys_pll3_mnit_ctl;
+ u32 anamix_misc_ctl;
+ u32 anamix_clk_mnit_ctl;
+ u32 reserved3[437];
+ u32 digprog;
+};
+#endif
struct fuse_bank9_regs {
u32 mac_addr0;
u32 ddr2_rcr;
};
-struct gpc_reg {
- u32 lpcr_bsc;
- u32 lpcr_ad;
- u32 lpcr_cpu1;
- u32 lpcr_cpu2;
- u32 lpcr_cpu3;
- u32 slpcr;
- u32 mst_cpu_mapping;
- u32 mmdc_cpu_mapping;
- u32 mlpcr;
- u32 pgc_ack_sel;
- u32 pgc_ack_sel_m4;
- u32 gpc_misc;
- u32 imr1_core0;
- u32 imr2_core0;
- u32 imr3_core0;
- u32 imr4_core0;
- u32 imr1_core1;
- u32 imr2_core1;
- u32 imr3_core1;
- u32 imr4_core1;
- u32 imr1_cpu1;
- u32 imr2_cpu1;
- u32 imr3_cpu1;
- u32 imr4_cpu1;
- u32 imr1_cpu3;
- u32 imr2_cpu3;
- u32 imr3_cpu3;
- u32 imr4_cpu3;
- u32 isr1_cpu0;
- u32 isr2_cpu0;
- u32 isr3_cpu0;
- u32 isr4_cpu0;
- u32 isr1_cpu1;
- u32 isr2_cpu1;
- u32 isr3_cpu1;
- u32 isr4_cpu1;
- u32 isr1_cpu2;
- u32 isr2_cpu2;
- u32 isr3_cpu2;
- u32 isr4_cpu2;
- u32 isr1_cpu3;
- u32 isr2_cpu3;
- u32 isr3_cpu3;
- u32 isr4_cpu3;
- u32 slt0_cfg;
- u32 slt1_cfg;
- u32 slt2_cfg;
- u32 slt3_cfg;
- u32 slt4_cfg;
- u32 slt5_cfg;
- u32 slt6_cfg;
- u32 slt7_cfg;
- u32 slt8_cfg;
- u32 slt9_cfg;
- u32 slt10_cfg;
- u32 slt11_cfg;
- u32 slt12_cfg;
- u32 slt13_cfg;
- u32 slt14_cfg;
- u32 pgc_cpu_0_1_mapping;
- u32 cpu_pgc_up_trg;
- u32 mix_pgc_up_trg;
- u32 pu_pgc_up_trg;
- u32 cpu_pgc_dn_trg;
- u32 mix_pgc_dn_trg;
- u32 pu_pgc_dn_trg;
- u32 lpcr_bsc2;
- u32 pgc_cpu_2_3_mapping;
- u32 lps_cpu0;
- u32 lps_cpu1;
- u32 lps_cpu2;
- u32 lps_cpu3;
- u32 gpc_gpr;
- u32 gtor;
- u32 debug_addr1;
- u32 debug_addr2;
- u32 cpu_pgc_up_status1;
- u32 mix_pgc_up_status0;
- u32 mix_pgc_up_status1;
- u32 mix_pgc_up_status2;
- u32 m4_mix_pgc_up_status0;
- u32 m4_mix_pgc_up_status1;
- u32 m4_mix_pgc_up_status2;
- u32 pu_pgc_up_status0;
- u32 pu_pgc_up_status1;
- u32 pu_pgc_up_status2;
- u32 m4_pu_pgc_up_status0;
- u32 m4_pu_pgc_up_status1;
- u32 m4_pu_pgc_up_status2;
- u32 a53_lp_io_0;
- u32 a53_lp_io_1;
- u32 a53_lp_io_2;
- u32 cpu_pgc_dn_status1;
- u32 mix_pgc_dn_status0;
- u32 mix_pgc_dn_status1;
- u32 mix_pgc_dn_status2;
- u32 m4_mix_pgc_dn_status0;
- u32 m4_mix_pgc_dn_status1;
- u32 m4_mix_pgc_dn_status2;
- u32 pu_pgc_dn_status0;
- u32 pu_pgc_dn_status1;
- u32 pu_pgc_dn_status2;
- u32 m4_pu_pgc_dn_status0;
- u32 m4_pu_pgc_dn_status1;
- u32 m4_pu_pgc_dn_status2;
- u32 res[3];
- u32 mix_pdn_flg;
- u32 pu_pdn_flg;
- u32 m4_mix_pdn_flg;
- u32 m4_pu_pdn_flg;
- u32 imr1_core2;
- u32 imr2_core2;
- u32 imr3_core2;
- u32 imr4_core2;
- u32 imr1_core3;
- u32 imr2_core3;
- u32 imr3_core3;
- u32 imr4_core3;
- u32 pgc_ack_sel_pu;
- u32 pgc_ack_sel_m4_pu;
- u32 slt15_cfg;
- u32 slt16_cfg;
- u32 slt17_cfg;
- u32 slt18_cfg;
- u32 slt19_cfg;
- u32 gpc_pu_pwrhsk;
- u32 slt0_cfg_pu;
- u32 slt1_cfg_pu;
- u32 slt2_cfg_pu;
- u32 slt3_cfg_pu;
- u32 slt4_cfg_pu;
- u32 slt5_cfg_pu;
- u32 slt6_cfg_pu;
- u32 slt7_cfg_pu;
- u32 slt8_cfg_pu;
- u32 slt9_cfg_pu;
- u32 slt10_cfg_pu;
- u32 slt11_cfg_pu;
- u32 slt12_cfg_pu;
- u32 slt13_cfg_pu;
- u32 slt14_cfg_pu;
- u32 slt15_cfg_pu;
- u32 slt16_cfg_pu;
- u32 slt17_cfg_pu;
- u32 slt18_cfg_pu;
- u32 slt19_cfg_pu;
-};
-
#define WDOG_WDT_MASK BIT(3)
#define WDOG_WDZST_MASK BIT(0)
struct wdog_regs {
u32 reserved_3[3];
};
-#define ROM_SW_INFO_ADDR_B0 0x00000968
+#define ROM_SW_INFO_ADDR_B0 (IS_ENABLED(CONFIG_IMX8MQ) ? 0x00000968 :\
+ 0x000009e8)
#define ROM_SW_INFO_ADDR_A0 0x000009e8
#define ROM_SW_INFO_ADDR is_soc_rev(CHIP_REV_1_0) ? \
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018-2019 NXP
+ */
+
+#ifndef __ASM_ARCH_IMX8MM_PINS_H__
+#define __ASM_ARCH_IMX8MM_PINS_H__
+
+#include <asm/mach-imx/iomux-v3.h>
+
+enum {
+ IMX8MM_PAD_GPIO1_IO00_GPIO1_IO0 = IOMUX_PAD(0x0290, 0x0028, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO00_CCM_ENET_PHY_REF_CLK_ROOT = IOMUX_PAD(0x0290, 0x0028, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO00_XTALOSC_REF_CLK_32K = IOMUX_PAD(0x0290, 0x0028, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO00_CCM_EXT_CLK1 = IOMUX_PAD(0x0290, 0x0028, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_GPIO1_IO01_GPIO1_IO1 = IOMUX_PAD(0x0294, 0x002C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO01_PWM1_OUT = IOMUX_PAD(0x0294, 0x002C, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO01_XTALOSC_REF_CLK_24M = IOMUX_PAD(0x0294, 0x002C, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO01_CCM_EXT_CLK2 = IOMUX_PAD(0x0294, 0x002C, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_GPIO1_IO02_GPIO1_IO2 = IOMUX_PAD(0x0298, 0x0030, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B = IOMUX_PAD(0x0298, 0x0030, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_ANY = IOMUX_PAD(0x0298, 0x0030, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_GPIO1_IO03_GPIO1_IO3 = IOMUX_PAD(0x029C, 0x0034, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO03_USDHC1_VSELECT = IOMUX_PAD(0x029C, 0x0034, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO03_SDMA1_EXT_EVENT0 = IOMUX_PAD(0x029C, 0x0034, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_GPIO1_IO04_GPIO1_IO4 = IOMUX_PAD(0x02A0, 0x0038, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO04_USDHC2_VSELECT = IOMUX_PAD(0x02A0, 0x0038, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO04_SDMA1_EXT_EVENT1 = IOMUX_PAD(0x02A0, 0x0038, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_GPIO1_IO05_GPIO1_IO5 = IOMUX_PAD(0x02A4, 0x003C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO05_ARM_PLATFORM_M4_NMI = IOMUX_PAD(0x02A4, 0x003C, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO05_CCM_PMIC_READY = IOMUX_PAD(0x02A4, 0x003C, 5, 0x04BC, 0, 0),
+ IMX8MM_PAD_GPIO1_IO05_SRC_INT_BOOT = IOMUX_PAD(0x02A4, 0x003C, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_GPIO1_IO06_GPIO1_IO6 = IOMUX_PAD(0x02A8, 0x0040, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO06_ENET1_MDC = IOMUX_PAD(0x02A8, 0x0040, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO06_USDHC1_CD_B = IOMUX_PAD(0x02A8, 0x0040, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO06_CCM_EXT_CLK3 = IOMUX_PAD(0x02A8, 0x0040, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_GPIO1_IO07_GPIO1_IO7 = IOMUX_PAD(0x02AC, 0x0044, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO07_ENET1_MDIO = IOMUX_PAD(0x02AC, 0x0044, 1, 0x04C0, 0, 0),
+ IMX8MM_PAD_GPIO1_IO07_USDHC1_WP = IOMUX_PAD(0x02AC, 0x0044, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO07_CCM_EXT_CLK4 = IOMUX_PAD(0x02AC, 0x0044, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_GPIO1_IO08_GPIO1_IO8 = IOMUX_PAD(0x02B0, 0x0048, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO08_ENET1_1588_EVENT0_IN = IOMUX_PAD(0x02B0, 0x0048, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO08_USDHC2_RESET_B = IOMUX_PAD(0x02B0, 0x0048, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO08_CCM_WAIT = IOMUX_PAD(0x02B0, 0x0048, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_GPIO1_IO09_GPIO1_IO9 = IOMUX_PAD(0x02B4, 0x004C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO09_ENET1_1588_EVENT0_OUT = IOMUX_PAD(0x02B4, 0x004C, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO09_USDHC3_RESET_B = IOMUX_PAD(0x02B4, 0x004C, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO09_SDMA2_EXT_EVENT0 = IOMUX_PAD(0x02B4, 0x004C, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO09_CCM_STOP = IOMUX_PAD(0x02B4, 0x004C, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_GPIO1_IO10_GPIO1_IO10 = IOMUX_PAD(0x02B8, 0x0050, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO10_USB1_OTG_ID = IOMUX_PAD(0x02B8, 0x0050, 1, 0x0000, 0, 0),
+
+ IMX8MM_PAD_GPIO1_IO11_GPIO1_IO11 = IOMUX_PAD(0x02BC, 0x0054, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO11_USB2_OTG_ID = IOMUX_PAD(0x02BC, 0x0054, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO11_USDHC3_VSELECT = IOMUX_PAD(0x02BC, 0x0054, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO11_CCM_PMIC_READY = IOMUX_PAD(0x02BC, 0x0054, 5, 0x04BC, 1, 0),
+ IMX8MM_PAD_GPIO1_IO11_CCM_OUT0 = IOMUX_PAD(0x02BC, 0x0054, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_GPIO1_IO12_GPIO1_IO12 = IOMUX_PAD(0x02C0, 0x0058, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO12_USB1_OTG_PWR = IOMUX_PAD(0x02C0, 0x0058, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO12_SDMA2_EXT_EVENT1 = IOMUX_PAD(0x02C0, 0x0058, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO12_CCM_OUT1 = IOMUX_PAD(0x02C0, 0x0058, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_GPIO1_IO13_GPIO1_IO13 = IOMUX_PAD(0x02C4, 0x005C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO13_USB1_OTG_OC = IOMUX_PAD(0x02C4, 0x005C, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO13_PWM2_OUT = IOMUX_PAD(0x02C4, 0x005C, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO13_CCM_OUT2 = IOMUX_PAD(0x02C4, 0x005C, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_GPIO1_IO14_GPIO1_IO14 = IOMUX_PAD(0x02C8, 0x0060, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO14_USB2_OTG_PWR = IOMUX_PAD(0x02C8, 0x0060, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO14_USDHC3_CD_B = IOMUX_PAD(0x02C8, 0x0060, 4, 0x0544, 2, 0),
+ IMX8MM_PAD_GPIO1_IO14_PWM3_OUT = IOMUX_PAD(0x02C8, 0x0060, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO14_CCM_CLKO1 = IOMUX_PAD(0x02C8, 0x0060, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_GPIO1_IO15_GPIO1_IO15 = IOMUX_PAD(0x02CC, 0x0064, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO15_USB2_OTG_OC = IOMUX_PAD(0x02CC, 0x0064, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO15_USDHC3_WP = IOMUX_PAD(0x02CC, 0x0064, 4, 0x0548, 2, 0),
+ IMX8MM_PAD_GPIO1_IO15_PWM4_OUT = IOMUX_PAD(0x02CC, 0x0064, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_GPIO1_IO15_CCM_CLKO2 = IOMUX_PAD(0x02CC, 0x0064, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ENET_MDC_ENET1_MDC = IOMUX_PAD(0x02D0, 0x0068, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_MDC_GPIO1_IO16 = IOMUX_PAD(0x02D0, 0x0068, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ENET_MDIO_ENET1_MDIO = IOMUX_PAD(0x02D4, 0x006C, 0, 0x04C0, 1, 0),
+ IMX8MM_PAD_ENET_MDIO_GPIO1_IO17 = IOMUX_PAD(0x02D4, 0x006C, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ENET_TD3_ENET1_RGMII_TD3 = IOMUX_PAD(0x02D8, 0x0070, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_TD3_GPIO1_IO18 = IOMUX_PAD(0x02D8, 0x0070, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ENET_TD2_ENET1_RGMII_TD2 = IOMUX_PAD(0x02DC, 0x0074, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_TD2_ENET1_TX_CLK = IOMUX_PAD(0x02DC, 0x0074, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_TD2_CCM_ENET_REF_CLK_ROOT = IOMUX_PAD(0x02DC, 0x0074, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_TD2_GPIO1_IO19 = IOMUX_PAD(0x02DC, 0x0074, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ENET_TD1_ENET1_RGMII_TD1 = IOMUX_PAD(0x02E0, 0x0078, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_TD1_GPIO1_IO20 = IOMUX_PAD(0x02E0, 0x0078, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ENET_TD0_ENET1_RGMII_TD0 = IOMUX_PAD(0x02E4, 0x007C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_TD0_GPIO1_IO21 = IOMUX_PAD(0x02E4, 0x007C, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ENET_TX_CTL_ENET1_RGMII_TX_CTL = IOMUX_PAD(0x02E8, 0x0080, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_TX_CTL_GPIO1_IO22 = IOMUX_PAD(0x02E8, 0x0080, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ENET_TXC_ENET1_RGMII_TXC = IOMUX_PAD(0x02EC, 0x0084, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_TXC_ENET1_TX_ER = IOMUX_PAD(0x02EC, 0x0084, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_TXC_GPIO1_IO23 = IOMUX_PAD(0x02EC, 0x0084, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ENET_RX_CTL_ENET1_RGMII_RX_CTL = IOMUX_PAD(0x02F0, 0x0088, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_RX_CTL_GPIO1_IO24 = IOMUX_PAD(0x02F0, 0x0088, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ENET_RXC_ENET1_RGMII_RXC = IOMUX_PAD(0x02F4, 0x008C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_RXC_ENET1_RX_ER = IOMUX_PAD(0x02F4, 0x008C, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_RXC_GPIO1_IO25 = IOMUX_PAD(0x02F4, 0x008C, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ENET_RD0_ENET1_RGMII_RD0 = IOMUX_PAD(0x02F8, 0x0090, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_RD0_GPIO1_IO26 = IOMUX_PAD(0x02F8, 0x0090, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ENET_RD1_ENET1_RGMII_RD1 = IOMUX_PAD(0x02FC, 0x0094, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_RD1_GPIO1_IO27 = IOMUX_PAD(0x02FC, 0x0094, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ENET_RD2_ENET1_RGMII_RD2 = IOMUX_PAD(0x0300, 0x0098, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_RD2_GPIO1_IO28 = IOMUX_PAD(0x0300, 0x0098, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ENET_RD3_ENET1_RGMII_RD3 = IOMUX_PAD(0x0304, 0x009C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ENET_RD3_GPIO1_IO29 = IOMUX_PAD(0x0304, 0x009C, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD1_CLK_USDHC1_CLK = IOMUX_PAD(0x0308, 0x00A0, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD1_CLK_GPIO2_IO0 = IOMUX_PAD(0x0308, 0x00A0, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD1_CMD_USDHC1_CMD = IOMUX_PAD(0x030C, 0x00A4, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD1_CMD_GPIO2_IO1 = IOMUX_PAD(0x030C, 0x00A4, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD1_DATA0_USDHC1_DATA0 = IOMUX_PAD(0x0310, 0x00A8, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD1_DATA0_GPIO2_IO2 = IOMUX_PAD(0x0310, 0x00A8, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD1_DATA1_USDHC1_DATA1 = IOMUX_PAD(0x0314, 0x00AC, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD1_DATA1_GPIO2_IO3 = IOMUX_PAD(0x0314, 0x00AC, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD1_DATA2_USDHC1_DATA2 = IOMUX_PAD(0x0318, 0x00B0, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD1_DATA2_GPIO2_IO4 = IOMUX_PAD(0x0318, 0x00B0, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD1_DATA3_USDHC1_DATA3 = IOMUX_PAD(0x031C, 0x00B4, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD1_DATA3_GPIO2_IO5 = IOMUX_PAD(0x031C, 0x00B4, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD1_DATA4_USDHC1_DATA4 = IOMUX_PAD(0x0320, 0x00B8, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD1_DATA4_GPIO2_IO6 = IOMUX_PAD(0x0320, 0x00B8, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD1_DATA5_USDHC1_DATA5 = IOMUX_PAD(0x0324, 0x00BC, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD1_DATA5_GPIO2_IO7 = IOMUX_PAD(0x0324, 0x00BC, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD1_DATA6_USDHC1_DATA6 = IOMUX_PAD(0x0328, 0x00C0, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD1_DATA6_GPIO2_IO8 = IOMUX_PAD(0x0328, 0x00C0, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD1_DATA7_USDHC1_DATA7 = IOMUX_PAD(0x032C, 0x00C4, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD1_DATA7_GPIO2_IO9 = IOMUX_PAD(0x032C, 0x00C4, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD1_RESET_B_USDHC1_RESET_B = IOMUX_PAD(0x0330, 0x00C8, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD1_RESET_B_GPIO2_IO10 = IOMUX_PAD(0x0330, 0x00C8, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD1_STROBE_USDHC1_STROBE = IOMUX_PAD(0x0334, 0x00CC, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD1_STROBE_GPIO2_IO11 = IOMUX_PAD(0x0334, 0x00CC, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD2_CD_B_USDHC2_CD_B = IOMUX_PAD(0x0338, 0x00D0, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD2_CD_B_GPIO2_IO12 = IOMUX_PAD(0x0338, 0x00D0, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD2_CLK_USDHC2_CLK = IOMUX_PAD(0x033C, 0x00D4, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD2_CLK_GPIO2_IO13 = IOMUX_PAD(0x033C, 0x00D4, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SD2_CLK_CCM_OBSERVE0 = IOMUX_PAD(0x033C, 0x00D4, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD2_CMD_USDHC2_CMD = IOMUX_PAD(0x0340, 0x00D8, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD2_CMD_GPIO2_IO14 = IOMUX_PAD(0x0340, 0x00D8, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SD2_CMD_CCM_OBSERVE1 = IOMUX_PAD(0x0340, 0x00D8, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD2_DATA0_USDHC2_DATA0 = IOMUX_PAD(0x0344, 0x00DC, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD2_DATA0_GPIO2_IO15 = IOMUX_PAD(0x0344, 0x00DC, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SD2_DATA0_CCM_OBSERVE2 = IOMUX_PAD(0x0344, 0x00DC, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD2_DATA1_USDHC2_DATA1 = IOMUX_PAD(0x0348, 0x00E0, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD2_DATA1_GPIO2_IO16 = IOMUX_PAD(0x0348, 0x00E0, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SD2_DATA1_CCM_WAIT = IOMUX_PAD(0x0348, 0x00E0, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD2_DATA2_USDHC2_DATA2 = IOMUX_PAD(0x034C, 0x00E4, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD2_DATA2_GPIO2_IO17 = IOMUX_PAD(0x034C, 0x00E4, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SD2_DATA2_CCM_STOP = IOMUX_PAD(0x034C, 0x00E4, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD2_DATA3_USDHC2_DATA3 = IOMUX_PAD(0x0350, 0x00E8, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD2_DATA3_GPIO2_IO18 = IOMUX_PAD(0x0350, 0x00E8, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SD2_DATA3_SRC_EARLY_RESET = IOMUX_PAD(0x0350, 0x00E8, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD2_RESET_B_USDHC2_RESET_B = IOMUX_PAD(0x0354, 0x00EC, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD2_RESET_B_GPIO2_IO19 = IOMUX_PAD(0x0354, 0x00EC, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SD2_RESET_B_SRC_SYSTEM_RESET = IOMUX_PAD(0x0354, 0x00EC, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SD2_WP_USDHC2_WP = IOMUX_PAD(0x0358, 0x00F0, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SD2_WP_GPIO2_IO20 = IOMUX_PAD(0x0358, 0x00F0, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_ALE_RAWNAND_ALE = IOMUX_PAD(0x035C, 0x00F4, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_ALE_QSPI_A_SCLK = IOMUX_PAD(0x035C, 0x00F4, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_ALE_GPIO3_IO0 = IOMUX_PAD(0x035C, 0x00F4, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_CE0_B_RAWNAND_CE0_B = IOMUX_PAD(0x0360, 0x00F8, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_CE0_B_QSPI_A_SS0_B = IOMUX_PAD(0x0360, 0x00F8, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_CE0_B_GPIO3_IO1 = IOMUX_PAD(0x0360, 0x00F8, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_CE1_B_RAWNAND_CE1_B = IOMUX_PAD(0x0364, 0x00FC, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_CE1_B_QSPI_A_SS1_B = IOMUX_PAD(0x0364, 0x00FC, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_CE1_B_USDHC3_STROBE = IOMUX_PAD(0x0364, 0x00FC, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_CE1_B_GPIO3_IO2 = IOMUX_PAD(0x0364, 0x00FC, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_CE2_B_RAWNAND_CE2_B = IOMUX_PAD(0x0368, 0x0100, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_CE2_B_QSPI_B_SS0_B = IOMUX_PAD(0x0368, 0x0100, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_CE2_B_USDHC3_DATA5 = IOMUX_PAD(0x0368, 0x0100, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_CE2_B_GPIO3_IO3 = IOMUX_PAD(0x0368, 0x0100, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_CE3_B_RAWNAND_CE3_B = IOMUX_PAD(0x036C, 0x0104, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_CE3_B_QSPI_B_SS1_B = IOMUX_PAD(0x036C, 0x0104, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_CE3_B_USDHC3_DATA6 = IOMUX_PAD(0x036C, 0x0104, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_CE3_B_GPIO3_IO4 = IOMUX_PAD(0x036C, 0x0104, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_CLE_RAWNAND_CLE = IOMUX_PAD(0x0370, 0x0108, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_CLE_QSPI_B_SCLK = IOMUX_PAD(0x0370, 0x0108, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_CLE_USDHC3_DATA7 = IOMUX_PAD(0x0370, 0x0108, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_CLE_GPIO3_IO5 = IOMUX_PAD(0x0370, 0x0108, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_DATA00_RAWNAND_DATA00 = IOMUX_PAD(0x0374, 0x010C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA00_QSPI_A_DATA0 = IOMUX_PAD(0x0374, 0x010C, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA00_GPIO3_IO6 = IOMUX_PAD(0x0374, 0x010C, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_DATA01_RAWNAND_DATA01 = IOMUX_PAD(0x0378, 0x0110, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA01_QSPI_A_DATA1 = IOMUX_PAD(0x0378, 0x0110, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA01_GPIO3_IO7 = IOMUX_PAD(0x0378, 0x0110, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_DATA02_RAWNAND_DATA02 = IOMUX_PAD(0x037C, 0x0114, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA02_QSPI_A_DATA2 = IOMUX_PAD(0x037C, 0x0114, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA02_USDHC3_CD_B = IOMUX_PAD(0x037C, 0x0114, 2, 0x0544, 0, 0),
+ IMX8MM_PAD_NAND_DATA02_GPIO3_IO8 = IOMUX_PAD(0x037C, 0x0114, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_DATA03_RAWNAND_DATA03 = IOMUX_PAD(0x0380, 0x0118, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA03_QSPI_A_DATA3 = IOMUX_PAD(0x0380, 0x0118, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA03_USDHC3_WP = IOMUX_PAD(0x0380, 0x0118, 2, 0x0548, 0, 0),
+ IMX8MM_PAD_NAND_DATA03_GPIO3_IO9 = IOMUX_PAD(0x0380, 0x0118, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_DATA04_RAWNAND_DATA04 = IOMUX_PAD(0x0384, 0x011C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA04_QSPI_B_DATA0 = IOMUX_PAD(0x0384, 0x011C, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA04_USDHC3_DATA0 = IOMUX_PAD(0x0384, 0x011C, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA04_GPIO3_IO10 = IOMUX_PAD(0x0384, 0x011C, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_DATA05_RAWNAND_DATA05 = IOMUX_PAD(0x0388, 0x0120, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA05_QSPI_B_DATA1 = IOMUX_PAD(0x0388, 0x0120, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA05_USDHC3_DATA1 = IOMUX_PAD(0x0388, 0x0120, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA05_GPIO3_IO11 = IOMUX_PAD(0x0388, 0x0120, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_DATA06_RAWNAND_DATA06 = IOMUX_PAD(0x038C, 0x0124, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA06_QSPI_B_DATA2 = IOMUX_PAD(0x038C, 0x0124, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA06_USDHC3_DATA2 = IOMUX_PAD(0x038C, 0x0124, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA06_GPIO3_IO12 = IOMUX_PAD(0x038C, 0x0124, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_DATA07_RAWNAND_DATA07 = IOMUX_PAD(0x0390, 0x0128, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA07_QSPI_B_DATA3 = IOMUX_PAD(0x0390, 0x0128, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA07_USDHC3_DATA3 = IOMUX_PAD(0x0390, 0x0128, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DATA07_GPIO3_IO13 = IOMUX_PAD(0x0390, 0x0128, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_DQS_RAWNAND_DQS = IOMUX_PAD(0x0394, 0x012C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DQS_QSPI_A_DQS = IOMUX_PAD(0x0394, 0x012C, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_DQS_GPIO3_IO14 = IOMUX_PAD(0x0394, 0x012C, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_RE_B_RAWNAND_RE_B = IOMUX_PAD(0x0398, 0x0130, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_RE_B_QSPI_B_DQS = IOMUX_PAD(0x0398, 0x0130, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_RE_B_USDHC3_DATA4 = IOMUX_PAD(0x0398, 0x0130, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_RE_B_GPIO3_IO15 = IOMUX_PAD(0x0398, 0x0130, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_READY_B_RAWNAND_READY_B = IOMUX_PAD(0x039C, 0x0134, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_READY_B_USDHC3_RESET_B = IOMUX_PAD(0x039C, 0x0134, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_READY_B_GPIO3_IO16 = IOMUX_PAD(0x039C, 0x0134, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_WE_B_RAWNAND_WE_B = IOMUX_PAD(0x03A0, 0x0138, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_WE_B_USDHC3_CLK = IOMUX_PAD(0x03A0, 0x0138, 2 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_WE_B_GPIO3_IO17 = IOMUX_PAD(0x03A0, 0x0138, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_NAND_WP_B_RAWNAND_WP_B = IOMUX_PAD(0x03A4, 0x013C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_WP_B_USDHC3_CMD = IOMUX_PAD(0x03A4, 0x013C, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_NAND_WP_B_GPIO3_IO18 = IOMUX_PAD(0x03A4, 0x013C, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI5_RXFS_SAI5_RX_SYNC = IOMUX_PAD(0x03A8, 0x0140, 0, 0x04E4, 0, 0),
+ IMX8MM_PAD_SAI5_RXFS_SAI1_TX_DATA0 = IOMUX_PAD(0x03A8, 0x0140, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI5_RXFS_GPIO3_IO19 = IOMUX_PAD(0x03A8, 0x0140, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI5_RXC_SAI5_RX_BCLK = IOMUX_PAD(0x03AC, 0x0144, 0, 0x04D0, 0, 0),
+ IMX8MM_PAD_SAI5_RXC_SAI1_TX_DATA1 = IOMUX_PAD(0x03AC, 0x0144, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI5_RXC_PDM_CLK = IOMUX_PAD(0x03AC, 0x0144, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI5_RXC_GPIO3_IO20 = IOMUX_PAD(0x03AC, 0x0144, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI5_RXD0_SAI5_RX_DATA0 = IOMUX_PAD(0x03B0, 0x0148, 0, 0x04D4, 0, 0),
+ IMX8MM_PAD_SAI5_RXD0_SAI1_TX_DATA2 = IOMUX_PAD(0x03B0, 0x0148, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI5_RXD0_PDM_BIT_STREAM0 = IOMUX_PAD(0x03B0, 0x0148, 4, 0x0534, 0, 0),
+ IMX8MM_PAD_SAI5_RXD0_GPIO3_IO21 = IOMUX_PAD(0x03B0, 0x0148, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI5_RXD1_SAI5_RX_DATA1 = IOMUX_PAD(0x03B4, 0x014C, 0, 0x04D8, 0, 0),
+ IMX8MM_PAD_SAI5_RXD1_SAI1_TX_DATA3 = IOMUX_PAD(0x03B4, 0x014C, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI5_RXD1_SAI1_TX_SYNC = IOMUX_PAD(0x03B4, 0x014C, 2, 0x04CC, 0, 0),
+ IMX8MM_PAD_SAI5_RXD1_SAI5_TX_SYNC = IOMUX_PAD(0x03B4, 0x014C, 3, 0x04EC, 0, 0),
+ IMX8MM_PAD_SAI5_RXD1_PDM_BIT_STREAM1 = IOMUX_PAD(0x03B4, 0x014C, 4, 0x0538, 0, 0),
+ IMX8MM_PAD_SAI5_RXD1_GPIO3_IO22 = IOMUX_PAD(0x03B4, 0x014C, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI5_RXD2_SAI5_RX_DATA2 = IOMUX_PAD(0x03B8, 0x0150, 0, 0x04DC, 0, 0),
+ IMX8MM_PAD_SAI5_RXD2_SAI1_TX_DATA4 = IOMUX_PAD(0x03B8, 0x0150, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI5_RXD2_SAI1_TX_SYNC = IOMUX_PAD(0x03B8, 0x0150, 2, 0x04CC, 1, 0),
+ IMX8MM_PAD_SAI5_RXD2_SAI5_TX_BCLK = IOMUX_PAD(0x03B8, 0x0150, 3, 0x04E8, 0, 0),
+ IMX8MM_PAD_SAI5_RXD2_PDM_BIT_STREAM2 = IOMUX_PAD(0x03B8, 0x0150, 4, 0x053C, 0, 0),
+ IMX8MM_PAD_SAI5_RXD2_GPIO3_IO23 = IOMUX_PAD(0x03B8, 0x0150, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI5_RXD3_SAI5_RX_DATA3 = IOMUX_PAD(0x03BC, 0x0154, 0, 0x04E0, 0, 0),
+ IMX8MM_PAD_SAI5_RXD3_SAI1_TX_DATA5 = IOMUX_PAD(0x03BC, 0x0154, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI5_RXD3_SAI1_TX_SYNC = IOMUX_PAD(0x03BC, 0x0154, 2, 0x04CC, 2, 0),
+ IMX8MM_PAD_SAI5_RXD3_SAI5_TX_DATA0 = IOMUX_PAD(0x03BC, 0x0154, 3, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI5_RXD3_PDM_BIT_STREAM3 = IOMUX_PAD(0x03BC, 0x0154, 4, 0x0540, 0, 0),
+ IMX8MM_PAD_SAI5_RXD3_GPIO3_IO24 = IOMUX_PAD(0x03BC, 0x0154, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI5_MCLK_SAI5_MCLK = IOMUX_PAD(0x03C0, 0x0158, 0, 0x052C, 0, 0),
+ IMX8MM_PAD_SAI5_MCLK_SAI1_TX_BCLK = IOMUX_PAD(0x03C0, 0x0158, 1, 0x04C8, 0, 0),
+ IMX8MM_PAD_SAI5_MCLK_GPIO3_IO25 = IOMUX_PAD(0x03C0, 0x0158, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI5_MCLK_SRC_TESTER_ACK = IOMUX_PAD(0x03C0, 0x0158, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_RXFS_SAI1_RX_SYNC = IOMUX_PAD(0x03C4, 0x015C, 0, 0x04C4, 0, 0),
+ IMX8MM_PAD_SAI1_RXFS_SAI5_RX_SYNC = IOMUX_PAD(0x03C4, 0x015C, 1, 0x04E4, 1, 0),
+ IMX8MM_PAD_SAI1_RXFS_ARM_PLATFORM_TRACE_CLK = IOMUX_PAD(0x03C4, 0x015C, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXFS_GPIO4_IO0 = IOMUX_PAD(0x03C4, 0x015C, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_RXC_SAI1_RX_BCLK = IOMUX_PAD(0x03C8, 0x0160, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXC_SAI5_RX_BCLK = IOMUX_PAD(0x03C8, 0x0160, 1, 0x04D0, 1, 0),
+ IMX8MM_PAD_SAI1_RXC_ARM_PLATFORM_TRACE_CTL = IOMUX_PAD(0x03C8, 0x0160, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXC_GPIO4_IO1 = IOMUX_PAD(0x03C8, 0x0160, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_RXD0_SAI1_RX_DATA0 = IOMUX_PAD(0x03CC, 0x0164, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD0_SAI5_RX_DATA0 = IOMUX_PAD(0x03CC, 0x0164, 1, 0x04D4, 1, 0),
+ IMX8MM_PAD_SAI1_RXD0_SAI1_TX_DATA1 = IOMUX_PAD(0x03CC, 0x0164, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD0_PDM_BIT_STREAM0 = IOMUX_PAD(0x03CC, 0x0164, 3, 0x0534, 1, 0),
+ IMX8MM_PAD_SAI1_RXD0_ARM_PLATFORM_TRACE0 = IOMUX_PAD(0x03CC, 0x0164, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD0_GPIO4_IO2 = IOMUX_PAD(0x03CC, 0x0164, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD0_SRC_BOOT_CFG0 = IOMUX_PAD(0x03CC, 0x0164, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_RXD1_SAI1_RX_DATA1 = IOMUX_PAD(0x03D0, 0x0168, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD1_SAI5_RX_DATA1 = IOMUX_PAD(0x03D0, 0x0168, 1, 0x04D8, 1, 0),
+ IMX8MM_PAD_SAI1_RXD1_PDM_BIT_STREAM1 = IOMUX_PAD(0x03D0, 0x0168, 3, 0x0538, 1, 0),
+ IMX8MM_PAD_SAI1_RXD1_ARM_PLATFORM_TRACE1 = IOMUX_PAD(0x03D0, 0x0168, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD1_GPIO4_IO3 = IOMUX_PAD(0x03D0, 0x0168, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD1_SRC_BOOT_CFG1 = IOMUX_PAD(0x03D0, 0x0168, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_RXD2_SAI1_RX_DATA2 = IOMUX_PAD(0x03D4, 0x016C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD2_SAI5_RX_DATA2 = IOMUX_PAD(0x03D4, 0x016C, 1, 0x04DC, 1, 0),
+ IMX8MM_PAD_SAI1_RXD2_PDM_BIT_STREAM2 = IOMUX_PAD(0x03D4, 0x016C, 3, 0x053C, 1, 0),
+ IMX8MM_PAD_SAI1_RXD2_ARM_PLATFORM_TRACE2 = IOMUX_PAD(0x03D4, 0x016C, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD2_GPIO4_IO4 = IOMUX_PAD(0x03D4, 0x016C, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD2_SRC_BOOT_CFG2 = IOMUX_PAD(0x03D4, 0x016C, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_RXD3_SAI1_RX_DATA3 = IOMUX_PAD(0x03D8, 0x0170, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD3_SAI5_RX_DATA3 = IOMUX_PAD(0x03D8, 0x0170, 1, 0x04E0, 1, 0),
+ IMX8MM_PAD_SAI1_RXD3_PDM_BIT_STREAM3 = IOMUX_PAD(0x03D8, 0x0170, 3, 0x0540, 1, 0),
+ IMX8MM_PAD_SAI1_RXD3_ARM_PLATFORM_TRACE3 = IOMUX_PAD(0x03D8, 0x0170, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD3_GPIO4_IO5 = IOMUX_PAD(0x03D8, 0x0170, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD3_SRC_BOOT_CFG3 = IOMUX_PAD(0x03D8, 0x0170, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_RXD4_SAI1_RX_DATA4 = IOMUX_PAD(0x03DC, 0x0174, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD4_SAI6_TX_BCLK = IOMUX_PAD(0x03DC, 0x0174, 1, 0x051C, 0, 0),
+ IMX8MM_PAD_SAI1_RXD4_SAI6_RX_BCLK = IOMUX_PAD(0x03DC, 0x0174, 2, 0x0510, 0, 0),
+ IMX8MM_PAD_SAI1_RXD4_ARM_PLATFORM_TRACE4 = IOMUX_PAD(0x03DC, 0x0174, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD4_GPIO4_IO6 = IOMUX_PAD(0x03DC, 0x0174, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD4_SRC_BOOT_CFG4 = IOMUX_PAD(0x03DC, 0x0174, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_RXD5_SAI1_RX_DATA5 = IOMUX_PAD(0x03E0, 0x0178, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD5_SAI6_TX_DATA0 = IOMUX_PAD(0x03E0, 0x0178, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD5_SAI6_RX_DATA0 = IOMUX_PAD(0x03E0, 0x0178, 2, 0x0514, 0, 0),
+ IMX8MM_PAD_SAI1_RXD5_SAI1_RX_SYNC = IOMUX_PAD(0x03E0, 0x0178, 3, 0x04C4, 1, 0),
+ IMX8MM_PAD_SAI1_RXD5_ARM_PLATFORM_TRACE5 = IOMUX_PAD(0x03E0, 0x0178, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD5_GPIO4_IO7 = IOMUX_PAD(0x03E0, 0x0178, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD5_SRC_BOOT_CFG5 = IOMUX_PAD(0x03E0, 0x0178, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_RXD6_SAI1_RX_DATA6 = IOMUX_PAD(0x03E4, 0x017C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD6_SAI6_TX_SYNC = IOMUX_PAD(0x03E4, 0x017C, 1, 0x0520, 0, 0),
+ IMX8MM_PAD_SAI1_RXD6_SAI6_RX_SYNC = IOMUX_PAD(0x03E4, 0x017C, 2, 0x0518, 0, 0),
+ IMX8MM_PAD_SAI1_RXD6_ARM_PLATFORM_TRACE6 = IOMUX_PAD(0x03E4, 0x017C, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD6_GPIO4_IO8 = IOMUX_PAD(0x03E4, 0x017C, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD6_SRC_BOOT_CFG6 = IOMUX_PAD(0x03E4, 0x017C, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_RXD7_SAI1_RX_DATA7 = IOMUX_PAD(0x03E8, 0x0180, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD7_SAI6_MCLK = IOMUX_PAD(0x03E8, 0x0180, 1, 0x0530, 0, 0),
+ IMX8MM_PAD_SAI1_RXD7_SAI1_TX_SYNC = IOMUX_PAD(0x03E8, 0x0180, 2, 0x04CC, 4, 0),
+ IMX8MM_PAD_SAI1_RXD7_SAI1_TX_DATA4 = IOMUX_PAD(0x03E8, 0x0180, 3, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD7_ARM_PLATFORM_TRACE7 = IOMUX_PAD(0x03E8, 0x0180, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD7_GPIO4_IO9 = IOMUX_PAD(0x03E8, 0x0180, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_RXD7_SRC_BOOT_CFG7 = IOMUX_PAD(0x03E8, 0x0180, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_TXFS_SAI1_TX_SYNC = IOMUX_PAD(0x03EC, 0x0184, 0, 0x04CC, 3, 0),
+ IMX8MM_PAD_SAI1_TXFS_SAI5_TX_SYNC = IOMUX_PAD(0x03EC, 0x0184, 1, 0x04EC, 1, 0),
+ IMX8MM_PAD_SAI1_TXFS_ARM_PLATFORM_EVENTO = IOMUX_PAD(0x03EC, 0x0184, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXFS_GPIO4_IO10 = IOMUX_PAD(0x03EC, 0x0184, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_TXC_SAI1_TX_BCLK = IOMUX_PAD(0x03F0, 0x0188, 0, 0x04C8, 1, 0),
+ IMX8MM_PAD_SAI1_TXC_SAI5_TX_BCLK = IOMUX_PAD(0x03F0, 0x0188, 1, 0x04E8, 1, 0),
+ IMX8MM_PAD_SAI1_TXC_ARM_PLATFORM_EVENTI = IOMUX_PAD(0x03F0, 0x0188, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXC_GPIO4_IO11 = IOMUX_PAD(0x03F0, 0x0188, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_TXD0_SAI1_TX_DATA0 = IOMUX_PAD(0x03F4, 0x018C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD0_SAI5_TX_DATA0 = IOMUX_PAD(0x03F4, 0x018C, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD0_ARM_PLATFORM_TRACE8 = IOMUX_PAD(0x03F4, 0x018C, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD0_GPIO4_IO12 = IOMUX_PAD(0x03F4, 0x018C, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD0_SRC_BOOT_CFG8 = IOMUX_PAD(0x03F4, 0x018C, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_TXD1_SAI1_TX_DATA1 = IOMUX_PAD(0x03F8, 0x0190, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD1_SAI5_TX_DATA1 = IOMUX_PAD(0x03F8, 0x0190, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD1_ARM_PLATFORM_TRACE9 = IOMUX_PAD(0x03F8, 0x0190, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD1_GPIO4_IO13 = IOMUX_PAD(0x03F8, 0x0190, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD1_SRC_BOOT_CFG9 = IOMUX_PAD(0x03F8, 0x0190, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_TXD2_SAI1_TX_DATA2 = IOMUX_PAD(0x03FC, 0x0194, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD2_SAI5_TX_DATA2 = IOMUX_PAD(0x03FC, 0x0194, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD2_ARM_PLATFORM_TRACE10 = IOMUX_PAD(0x03FC, 0x0194, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD2_GPIO4_IO14 = IOMUX_PAD(0x03FC, 0x0194, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD2_SRC_BOOT_CFG10 = IOMUX_PAD(0x03FC, 0x0194, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_TXD3_SAI1_TX_DATA3 = IOMUX_PAD(0x0400, 0x0198, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD3_SAI5_TX_DATA3 = IOMUX_PAD(0x0400, 0x0198, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD3_ARM_PLATFORM_TRACE11 = IOMUX_PAD(0x0400, 0x0198, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD3_GPIO4_IO15 = IOMUX_PAD(0x0400, 0x0198, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD3_SRC_BOOT_CFG11 = IOMUX_PAD(0x0400, 0x0198, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_TXD4_SAI1_TX_DATA4 = IOMUX_PAD(0x0404, 0x019C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD4_SAI6_RX_BCLK = IOMUX_PAD(0x0404, 0x019C, 1, 0x0510, 1, 0),
+ IMX8MM_PAD_SAI1_TXD4_SAI6_TX_BCLK = IOMUX_PAD(0x0404, 0x019C, 2, 0x051C, 1, 0),
+ IMX8MM_PAD_SAI1_TXD4_ARM_PLATFORM_TRACE12 = IOMUX_PAD(0x0404, 0x019C, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD4_GPIO4_IO16 = IOMUX_PAD(0x0404, 0x019C, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD4_SRC_BOOT_CFG12 = IOMUX_PAD(0x0404, 0x019C, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_TXD5_SAI1_TX_DATA5 = IOMUX_PAD(0x0408, 0x01A0, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD5_SAI6_RX_DATA0 = IOMUX_PAD(0x0408, 0x01A0, 1, 0x0514, 1, 0),
+ IMX8MM_PAD_SAI1_TXD5_SAI6_TX_DATA0 = IOMUX_PAD(0x0408, 0x01A0, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD5_ARM_PLATFORM_TRACE13 = IOMUX_PAD(0x0408, 0x01A0, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD5_GPIO4_IO17 = IOMUX_PAD(0x0408, 0x01A0, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD5_SRC_BOOT_CFG13 = IOMUX_PAD(0x0408, 0x01A0, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_TXD6_SAI1_TX_DATA6 = IOMUX_PAD(0x040C, 0x01A4, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD6_SAI6_RX_SYNC = IOMUX_PAD(0x040C, 0x01A4, 1, 0x0518, 1, 0),
+ IMX8MM_PAD_SAI1_TXD6_SAI6_TX_SYNC = IOMUX_PAD(0x040C, 0x01A4, 2, 0x0520, 1, 0),
+ IMX8MM_PAD_SAI1_TXD6_ARM_PLATFORM_TRACE14 = IOMUX_PAD(0x040C, 0x01A4, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD6_GPIO4_IO18 = IOMUX_PAD(0x040C, 0x01A4, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD6_SRC_BOOT_CFG14 = IOMUX_PAD(0x040C, 0x01A4, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_TXD7_SAI1_TX_DATA7 = IOMUX_PAD(0x0410, 0x01A8, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD7_SAI6_MCLK = IOMUX_PAD(0x0410, 0x01A8, 1, 0x0530, 1, 0),
+ IMX8MM_PAD_SAI1_TXD7_PDM_CLK = IOMUX_PAD(0x0410, 0x01A8, 3, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD7_ARM_PLATFORM_TRACE15 = IOMUX_PAD(0x0410, 0x01A8, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD7_GPIO4_IO19 = IOMUX_PAD(0x0410, 0x01A8, 5, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_TXD7_SRC_BOOT_CFG15 = IOMUX_PAD(0x0410, 0x01A8, 6, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI1_MCLK_SAI1_MCLK = IOMUX_PAD(0x0414, 0x01AC, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_MCLK_SAI5_MCLK = IOMUX_PAD(0x0414, 0x01AC, 1, 0x052C, 1, 0),
+ IMX8MM_PAD_SAI1_MCLK_SAI1_TX_BCLK = IOMUX_PAD(0x0414, 0x01AC, 2, 0x04C8, 2, 0),
+ IMX8MM_PAD_SAI1_MCLK_PDM_CLK = IOMUX_PAD(0x0414, 0x01AC, 3, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI1_MCLK_GPIO4_IO20 = IOMUX_PAD(0x0414, 0x01AC, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI2_RXFS_SAI2_RX_SYNC = IOMUX_PAD(0x0418, 0x01B0, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_RXFS_SAI5_TX_SYNC = IOMUX_PAD(0x0418, 0x01B0, 1, 0x04EC, 2, 0),
+ IMX8MM_PAD_SAI2_RXFS_SAI5_TX_DATA1 = IOMUX_PAD(0x0418, 0x01B0, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_RXFS_SAI2_RX_DATA1 = IOMUX_PAD(0x0418, 0x01B0, 3, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_RXFS_UART1_TX = IOMUX_PAD(0x0418, 0x01B0, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_RXFS_UART1_RX = IOMUX_PAD(0x0418, 0x01B0, 4, 0x04F4, 2, 0),
+ IMX8MM_PAD_SAI2_RXFS_GPIO4_IO21 = IOMUX_PAD(0x0418, 0x01B0, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI2_RXC_SAI2_RX_BCLK = IOMUX_PAD(0x041C, 0x01B4, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_RXC_SAI5_TX_BCLK = IOMUX_PAD(0x041C, 0x01B4, 1, 0x04E8, 2, 0),
+ IMX8MM_PAD_SAI2_RXC_UART1_RX = IOMUX_PAD(0x041C, 0x01B4, 4, 0x04F4, 3, 0),
+ IMX8MM_PAD_SAI2_RXC_UART1_TX = IOMUX_PAD(0x041C, 0x01B4, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_RXC_GPIO4_IO22 = IOMUX_PAD(0x041C, 0x01B4, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI2_RXD0_SAI2_RX_DATA0 = IOMUX_PAD(0x0420, 0x01B8, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_RXD0_SAI5_TX_DATA0 = IOMUX_PAD(0x0420, 0x01B8, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_RXD0_UART1_RTS_B = IOMUX_PAD(0x0420, 0x01B8, 4, 0x04F0, 2, 0),
+ IMX8MM_PAD_SAI2_RXD0_UART1_CTS_B = IOMUX_PAD(0x0420, 0x01B8, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_RXD0_GPIO4_IO23 = IOMUX_PAD(0x0420, 0x01B8, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI2_TXFS_SAI2_TX_SYNC = IOMUX_PAD(0x0424, 0x01BC, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_TXFS_SAI5_TX_DATA1 = IOMUX_PAD(0x0424, 0x01BC, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_TXFS_SAI2_TX_DATA1 = IOMUX_PAD(0x0424, 0x01BC, 3, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_TXFS_UART1_CTS_B = IOMUX_PAD(0x0424, 0x01BC, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_TXFS_UART1_RTS_B = IOMUX_PAD(0x0424, 0x01BC, 4, 0x04F0, 3, 0),
+ IMX8MM_PAD_SAI2_TXFS_GPIO4_IO24 = IOMUX_PAD(0x0424, 0x01BC, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI2_TXC_SAI2_TX_BCLK = IOMUX_PAD(0x0428, 0x01C0, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_TXC_SAI5_TX_DATA2 = IOMUX_PAD(0x0428, 0x01C0, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_TXC_GPIO4_IO25 = IOMUX_PAD(0x0428, 0x01C0, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI2_TXD0_SAI2_TX_DATA0 = IOMUX_PAD(0x042C, 0x01C4, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_TXD0_SAI5_TX_DATA3 = IOMUX_PAD(0x042C, 0x01C4, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_TXD0_GPIO4_IO26 = IOMUX_PAD(0x042C, 0x01C4, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI2_MCLK_SAI2_MCLK = IOMUX_PAD(0x0430, 0x01C8, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI2_MCLK_SAI5_MCLK = IOMUX_PAD(0x0430, 0x01C8, 1, 0x052C, 2, 0),
+ IMX8MM_PAD_SAI2_MCLK_GPIO4_IO27 = IOMUX_PAD(0x0430, 0x01C8, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI3_RXFS_SAI3_RX_SYNC = IOMUX_PAD(0x0434, 0x01CC, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_RXFS_GPT1_CAPTURE1 = IOMUX_PAD(0x0434, 0x01CC, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_RXFS_SAI5_RX_SYNC = IOMUX_PAD(0x0434, 0x01CC, 2, 0x04E4, 2, 0),
+ IMX8MM_PAD_SAI3_RXFS_SAI3_RX_DATA1 = IOMUX_PAD(0x0434, 0x01CC, 3, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_RXFS_GPIO4_IO28 = IOMUX_PAD(0x0434, 0x01CC, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI3_RXC_SAI3_RX_BCLK = IOMUX_PAD(0x0438, 0x01D0, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_RXC_GPT1_CLK = IOMUX_PAD(0x0438, 0x01D0, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_RXC_SAI5_RX_BCLK = IOMUX_PAD(0x0438, 0x01D0, 2, 0x04D0, 2, 0),
+ IMX8MM_PAD_SAI3_RXC_UART2_CTS_B = IOMUX_PAD(0x0438, 0x01D0, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_RXC_UART2_RTS_B = IOMUX_PAD(0x0438, 0x01D0, 4, 0x04F8, 2, 0),
+ IMX8MM_PAD_SAI3_RXC_GPIO4_IO29 = IOMUX_PAD(0x0438, 0x01D0, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI3_RXD_SAI3_RX_DATA0 = IOMUX_PAD(0x043C, 0x01D4, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_RXD_GPT1_COMPARE1 = IOMUX_PAD(0x043C, 0x01D4, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_RXD_SAI5_RX_DATA0 = IOMUX_PAD(0x043C, 0x01D4, 2, 0x04D4, 2, 0),
+ IMX8MM_PAD_SAI3_RXD_UART2_RTS_B = IOMUX_PAD(0x043C, 0x01D4, 4, 0x04F8, 3, 0),
+ IMX8MM_PAD_SAI3_RXD_UART2_CTS_B = IOMUX_PAD(0x043C, 0x01D4, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_RXD_GPIO4_IO30 = IOMUX_PAD(0x043C, 0x01D4, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI3_TXFS_SAI3_TX_SYNC = IOMUX_PAD(0x0440, 0x01D8, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_TXFS_GPT1_CAPTURE2 = IOMUX_PAD(0x0440, 0x01D8, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_TXFS_SAI5_RX_DATA1 = IOMUX_PAD(0x0440, 0x01D8, 2, 0x04D8, 2, 0),
+ IMX8MM_PAD_SAI3_TXFS_SAI3_TX_DATA1 = IOMUX_PAD(0x0440, 0x01D8, 3, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_TXFS_UART2_RX = IOMUX_PAD(0x0440, 0x01D8, 4, 0x04FC, 2, 0),
+ IMX8MM_PAD_SAI3_TXFS_UART2_TX = IOMUX_PAD(0x0440, 0x01D8, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_TXFS_GPIO4_IO31 = IOMUX_PAD(0x0440, 0x01D8, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI3_TXC_SAI3_TX_BCLK = IOMUX_PAD(0x0444, 0x01DC, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_TXC_GPT1_COMPARE2 = IOMUX_PAD(0x0444, 0x01DC, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_TXC_SAI5_RX_DATA2 = IOMUX_PAD(0x0444, 0x01DC, 2, 0x04DC, 2, 0),
+ IMX8MM_PAD_SAI3_TXC_UART2_TX = IOMUX_PAD(0x0444, 0x01DC, 4, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_TXC_UART2_RX = IOMUX_PAD(0x0444, 0x01DC, 4, 0x04FC, 3, 0),
+ IMX8MM_PAD_SAI3_TXC_GPIO5_IO0 = IOMUX_PAD(0x0444, 0x01DC, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI3_TXD_SAI3_TX_DATA0 = IOMUX_PAD(0x0448, 0x01E0, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_TXD_GPT1_COMPARE3 = IOMUX_PAD(0x0448, 0x01E0, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_TXD_SAI5_RX_DATA3 = IOMUX_PAD(0x0448, 0x01E0, 2, 0x04E0, 2, 0),
+ IMX8MM_PAD_SAI3_TXD_GPIO5_IO1 = IOMUX_PAD(0x0448, 0x01E0, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SAI3_MCLK_SAI3_MCLK = IOMUX_PAD(0x044C, 0x01E4, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_MCLK_PWM4_OUT = IOMUX_PAD(0x044C, 0x01E4, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SAI3_MCLK_SAI5_MCLK = IOMUX_PAD(0x044C, 0x01E4, 2, 0x052C, 3, 0),
+ IMX8MM_PAD_SAI3_MCLK_GPIO5_IO2 = IOMUX_PAD(0x044C, 0x01E4, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SPDIF_TX_SPDIF1_OUT = IOMUX_PAD(0x0450, 0x01E8, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SPDIF_TX_PWM3_OUT = IOMUX_PAD(0x0450, 0x01E8, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SPDIF_TX_GPIO5_IO3 = IOMUX_PAD(0x0450, 0x01E8, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SPDIF_RX_SPDIF1_IN = IOMUX_PAD(0x0454, 0x01EC, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SPDIF_RX_PWM2_OUT = IOMUX_PAD(0x0454, 0x01EC, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SPDIF_RX_GPIO5_IO4 = IOMUX_PAD(0x0454, 0x01EC, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_SPDIF_EXT_CLK_SPDIF1_EXT_CLK = IOMUX_PAD(0x0458, 0x01F0, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_SPDIF_EXT_CLK_PWM1_OUT = IOMUX_PAD(0x0458, 0x01F0, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_SPDIF_EXT_CLK_GPIO5_IO5 = IOMUX_PAD(0x0458, 0x01F0, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ECSPI1_SCLK_ECSPI1_SCLK = IOMUX_PAD(0x045C, 0x01F4, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ECSPI1_SCLK_UART3_RX = IOMUX_PAD(0x045C, 0x01F4, 1, 0x0504, 0, 0),
+ IMX8MM_PAD_ECSPI1_SCLK_UART3_TX = IOMUX_PAD(0x045C, 0x01F4, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_ECSPI1_SCLK_GPIO5_IO6 = IOMUX_PAD(0x045C, 0x01F4, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ECSPI1_MOSI_ECSPI1_MOSI = IOMUX_PAD(0x0460, 0x01F8, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ECSPI1_MOSI_UART3_TX = IOMUX_PAD(0x0460, 0x01F8, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_ECSPI1_MOSI_UART3_RX = IOMUX_PAD(0x0460, 0x01F8, 1, 0x0504, 1, 0),
+ IMX8MM_PAD_ECSPI1_MOSI_GPIO5_IO7 = IOMUX_PAD(0x0460, 0x01F8, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ECSPI1_MISO_ECSPI1_MISO = IOMUX_PAD(0x0464, 0x01FC, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ECSPI1_MISO_UART3_CTS_B = IOMUX_PAD(0x0464, 0x01FC, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_ECSPI1_MISO_UART3_RTS_B = IOMUX_PAD(0x0464, 0x01FC, 1, 0x0500, 0, 0),
+ IMX8MM_PAD_ECSPI1_MISO_GPIO5_IO8 = IOMUX_PAD(0x0464, 0x01FC, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ECSPI1_SS0_ECSPI1_SS0 = IOMUX_PAD(0x0468, 0x0200, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ECSPI1_SS0_UART3_RTS_B = IOMUX_PAD(0x0468, 0x0200, 1, 0x0500, 1, 0),
+ IMX8MM_PAD_ECSPI1_SS0_UART3_CTS_B = IOMUX_PAD(0x0468, 0x0200, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_ECSPI1_SS0_GPIO5_IO9 = IOMUX_PAD(0x0468, 0x0200, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ECSPI2_SCLK_ECSPI2_SCLK = IOMUX_PAD(0x046C, 0x0204, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ECSPI2_SCLK_UART4_RX = IOMUX_PAD(0x046C, 0x0204, 1, 0x050C, 0, 0),
+ IMX8MM_PAD_ECSPI2_SCLK_UART4_TX = IOMUX_PAD(0x046C, 0x0204, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_ECSPI2_SCLK_GPIO5_IO10 = IOMUX_PAD(0x046C, 0x0204, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ECSPI2_MOSI_ECSPI2_MOSI = IOMUX_PAD(0x0470, 0x0208, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ECSPI2_MOSI_UART4_TX = IOMUX_PAD(0x0470, 0x0208, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_ECSPI2_MOSI_UART4_RX = IOMUX_PAD(0x0470, 0x0208, 1, 0x050C, 1, 0),
+ IMX8MM_PAD_ECSPI2_MOSI_GPIO5_IO11 = IOMUX_PAD(0x0470, 0x0208, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ECSPI2_MISO_ECSPI2_MISO = IOMUX_PAD(0x0474, 0x020C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ECSPI2_MISO_UART4_CTS_B = IOMUX_PAD(0x0474, 0x020C, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_ECSPI2_MISO_UART4_RTS_B = IOMUX_PAD(0x0474, 0x020C, 1, 0x0508, 0, 0),
+ IMX8MM_PAD_ECSPI2_MISO_GPIO5_IO12 = IOMUX_PAD(0x0474, 0x020C, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_ECSPI2_SS0_ECSPI2_SS0 = IOMUX_PAD(0x0478, 0x0210, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_ECSPI2_SS0_UART4_RTS_B = IOMUX_PAD(0x0478, 0x0210, 1, 0x0508, 1, 0),
+ IMX8MM_PAD_ECSPI2_SS0_UART4_CTS_B = IOMUX_PAD(0x0478, 0x0210, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_ECSPI2_SS0_GPIO5_IO13 = IOMUX_PAD(0x0478, 0x0210, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_I2C1_SCL_I2C1_SCL = IOMUX_PAD(0x047C, 0x0214, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C1_SCL_ENET1_MDC = IOMUX_PAD(0x047C, 0x0214, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C1_SCL_GPIO5_IO14 = IOMUX_PAD(0x047C, 0x0214, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_I2C1_SDA_I2C1_SDA = IOMUX_PAD(0x0480, 0x0218, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C1_SDA_ENET1_MDIO = IOMUX_PAD(0x0480, 0x0218, 1, 0x04C0, 2, 0),
+ IMX8MM_PAD_I2C1_SDA_GPIO5_IO15 = IOMUX_PAD(0x0480, 0x0218, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_I2C2_SCL_I2C2_SCL = IOMUX_PAD(0x0484, 0x021C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C2_SCL_ENET1_1588_EVENT1_IN = IOMUX_PAD(0x0484, 0x021C, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C2_SCL_USDHC3_CD_B = IOMUX_PAD(0x0484, 0x021C, 2, 0x0544, 1, 0),
+ IMX8MM_PAD_I2C2_SCL_GPIO5_IO16 = IOMUX_PAD(0x0484, 0x021C, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_I2C2_SDA_I2C2_SDA = IOMUX_PAD(0x0488, 0x0220, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C2_SDA_ENET1_1588_EVENT1_OUT = IOMUX_PAD(0x0488, 0x0220, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C2_SDA_USDHC3_WP = IOMUX_PAD(0x0488, 0x0220, 2, 0x0548, 1, 0),
+ IMX8MM_PAD_I2C2_SDA_GPIO5_IO17 = IOMUX_PAD(0x0488, 0x0220, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_I2C3_SCL_I2C3_SCL = IOMUX_PAD(0x048C, 0x0224, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C3_SCL_PWM4_OUT = IOMUX_PAD(0x048C, 0x0224, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C3_SCL_GPT2_CLK = IOMUX_PAD(0x048C, 0x0224, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C3_SCL_GPIO5_IO18 = IOMUX_PAD(0x048C, 0x0224, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_I2C3_SDA_I2C3_SDA = IOMUX_PAD(0x0490, 0x0228, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C3_SDA_PWM3_OUT = IOMUX_PAD(0x0490, 0x0228, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C3_SDA_GPT3_CLK = IOMUX_PAD(0x0490, 0x0228, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C3_SDA_GPIO5_IO19 = IOMUX_PAD(0x0490, 0x0228, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_I2C4_SCL_I2C4_SCL = IOMUX_PAD(0x0494, 0x022C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C4_SCL_PWM2_OUT = IOMUX_PAD(0x0494, 0x022C, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C4_SCL_PCIE1_CLKREQ_B = IOMUX_PAD(0x0494, 0x022C, 2, 0x0524, 0, 0),
+ IMX8MM_PAD_I2C4_SCL_GPIO5_IO20 = IOMUX_PAD(0x0494, 0x022C, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_I2C4_SDA_I2C4_SDA = IOMUX_PAD(0x0498, 0x0230, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C4_SDA_PWM1_OUT = IOMUX_PAD(0x0498, 0x0230, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C4_SDA_GPIO5_IO21 = IOMUX_PAD(0x0498, 0x0230, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_UART1_RXD_UART1_RX = IOMUX_PAD(0x049C, 0x0234, 0, 0x04F4, 0, 0),
+ IMX8MM_PAD_UART1_RXD_UART1_TX = IOMUX_PAD(0x049C, 0x0234, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_UART1_RXD_ECSPI3_SCLK = IOMUX_PAD(0x049C, 0x0234, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_UART1_RXD_GPIO5_IO22 = IOMUX_PAD(0x049C, 0x0234, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_UART1_TXD_UART1_TX = IOMUX_PAD(0x04A0, 0x0238, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_UART1_TXD_UART1_RX = IOMUX_PAD(0x04A0, 0x0238, 0, 0x04F4, 1, 0),
+ IMX8MM_PAD_UART1_TXD_ECSPI3_MOSI = IOMUX_PAD(0x04A0, 0x0238, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_UART1_TXD_GPIO5_IO23 = IOMUX_PAD(0x04A0, 0x0238, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_UART2_RXD_UART2_RX = IOMUX_PAD(0x04A4, 0x023C, 0, 0x04FC, 0, 0),
+ IMX8MM_PAD_UART2_RXD_UART2_TX = IOMUX_PAD(0x04A4, 0x023C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_UART2_RXD_ECSPI3_MISO = IOMUX_PAD(0x04A4, 0x023C, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_UART2_RXD_GPIO5_IO24 = IOMUX_PAD(0x04A4, 0x023C, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_UART2_TXD_UART2_TX = IOMUX_PAD(0x04A8, 0x0240, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_UART2_TXD_UART2_RX = IOMUX_PAD(0x04A8, 0x0240, 0, 0x04FC, 1, 0),
+ IMX8MM_PAD_UART2_TXD_ECSPI3_SS0 = IOMUX_PAD(0x04A8, 0x0240, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_UART2_TXD_GPIO5_IO25 = IOMUX_PAD(0x04A8, 0x0240, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_UART3_RXD_UART3_RX = IOMUX_PAD(0x04AC, 0x0244, 0, 0x0504, 2, 0),
+ IMX8MM_PAD_UART3_RXD_UART3_TX = IOMUX_PAD(0x04AC, 0x0244, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_UART3_RXD_UART1_CTS_B = IOMUX_PAD(0x04AC, 0x0244, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_UART3_RXD_UART1_RTS_B = IOMUX_PAD(0x04AC, 0x0244, 1, 0x04F0, 0, 0),
+ IMX8MM_PAD_UART3_RXD_USDHC3_RESET_B = IOMUX_PAD(0x04AC, 0x0244, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_UART3_RXD_GPIO5_IO26 = IOMUX_PAD(0x04AC, 0x0244, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_UART3_TXD_UART3_TX = IOMUX_PAD(0x04B0, 0x0248, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_UART3_TXD_UART3_RX = IOMUX_PAD(0x04B0, 0x0248, 0, 0x0504, 3, 0),
+ IMX8MM_PAD_UART3_TXD_UART1_RTS_B = IOMUX_PAD(0x04B0, 0x0248, 1, 0x04F0, 1, 0),
+ IMX8MM_PAD_UART3_TXD_UART1_CTS_B = IOMUX_PAD(0x04B0, 0x0248, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_UART3_TXD_USDHC3_VSELECT = IOMUX_PAD(0x04B0, 0x0248, 2, 0x0000, 0, 0),
+ IMX8MM_PAD_UART3_TXD_GPIO5_IO27 = IOMUX_PAD(0x04B0, 0x0248, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_UART4_RXD_UART4_RX = IOMUX_PAD(0x04B4, 0x024C, 0, 0x050C, 2, 0),
+ IMX8MM_PAD_UART4_RXD_UART4_TX = IOMUX_PAD(0x04B4, 0x024C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_UART4_RXD_UART2_CTS_B = IOMUX_PAD(0x04B4, 0x024C, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_UART4_RXD_UART2_RTS_B = IOMUX_PAD(0x04B4, 0x024C, 1, 0x04F8, 0, 0),
+ IMX8MM_PAD_UART4_RXD_PCIE1_CLKREQ_B = IOMUX_PAD(0x04B4, 0x024C, 2, 0x0524, 1, 0),
+ IMX8MM_PAD_UART4_RXD_GPIO5_IO28 = IOMUX_PAD(0x04B4, 0x024C, 5, 0x0000, 0, 0),
+
+ IMX8MM_PAD_UART4_TXD_UART4_TX = IOMUX_PAD(0x04B8, 0x0250, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_UART4_TXD_UART4_RX = IOMUX_PAD(0x04B8, 0x0250, 0, 0x050C, 3, 0),
+ IMX8MM_PAD_UART4_TXD_UART2_RTS_B = IOMUX_PAD(0x04B8, 0x0250, 1, 0x04F8, 1, 0),
+ IMX8MM_PAD_UART4_TXD_UART2_CTS_B = IOMUX_PAD(0x04B8, 0x0250, 1, 0x0000, 0, 0),
+ IMX8MM_PAD_UART4_TXD_GPIO5_IO29 = IOMUX_PAD(0x04B8, 0x0250, 5, 0x0000, 0, 0),
+};
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2017 NXP
+ */
+
+#ifndef _ASM_ARCH_IMX8M_POWER_DOMAIN_H
+#define _ASM_ARCH_IMX8M_POWER_DOMAIN_H
+
+struct imx8m_power_domain_platdata {
+ int resource_id;
+ int has_pd;
+ struct power_domain pd;
+};
+
+#endif
void enable_ocotp_clk(unsigned char enable);
#endif
void enable_usboh3_clk(unsigned char enable);
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
void hab_caam_clock_enable(unsigned char enable);
#endif
void mxs_set_lcdclk(uint32_t base_addr, uint32_t freq);
u32 mxc_get_clock(enum mxc_clock clk);
u32 get_lpuart_clk(void);
-#ifdef CONFIG_SYS_LPI2C_IMX
+#ifdef CONFIG_SYS_I2C_IMX_LPI2C
int enable_i2c_clk(unsigned char enable, unsigned i2c_num);
u32 imx_get_i2cclk(unsigned i2c_num);
#endif
#define ARCH_MXC
+#define ROM_SW_INFO_ADDR 0x000001E8
+
#define CAAM_SEC_SRAM_BASE (0x26000000)
#define CAAM_SEC_SRAM_SIZE (SZ_32K)
#define CAAM_SEC_SRAM_END (CAAM_SEC_SRAM_BASE + CAAM_SEC_SRAM_SIZE - 1)
#define USDHC1_AIPS2_SLOT (56)
#define RGPIO2P0_AIPS0_SLOT (15)
#define RGPIO2P1_AIPS2_SLOT (15)
+#define SNVS_AIPS2_SLOT (35)
#define IOMUXC0_AIPS0_SLOT (61)
#define OCOTP_CTRL_AIPS1_SLOT (38)
#define OCOTP_CTRL_PCC1_SLOT (38)
#define USDHC0_RBASE ((AIPS2_BASE + (AIPS2_SLOT_SIZE * USDHC0_AIPS2_SLOT)))
#define USDHC1_RBASE ((AIPS2_BASE + (AIPS2_SLOT_SIZE * USDHC1_AIPS2_SLOT)))
+#define SNVS_BASE ((AIPS2_BASE + (AIPS2_SLOT_SIZE * SNVS_AIPS2_SLOT)))
+#define SNVS_LP_LPCR (SNVS_BASE + 0x38)
+
#define RGPIO2P0_RBASE ((AIPS0_BASE + (AIPS0_SLOT_SIZE * RGPIO2P0_AIPS0_SLOT)))
#define RGPIO2P1_RBASE ((AIPS2_BASE + (AIPS2_SLOT_SIZE * RGPIO2P1_AIPS2_SLOT)))
#define MMDC_MPWRDQBY3DL_WR_DQ25_DEL_MASK ((0x3f << MMDC_MPWRDQBY3DL_WR_DQ25_DEL))
#define MMDC_MPWRDQBY3DL_WR_DQ24_DEL_MASK ((0x3f << MMDC_MPWRDQBY3DL_WR_DQ24_DEL))
+#define SNVS_LPCR_DPEN (0x20)
+#define SNVS_LPCR_SRTC_ENV (0x1)
+
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
#include <asm/types.h>
u32 usb1_pfda_ctrl1_tog; /* 0x14c */
};
+struct bootrom_sw_info {
+ u8 reserved_1;
+ u8 boot_dev_instance;
+ u8 boot_dev_type;
+ u8 reserved_2;
+ u32 core_freq;
+ u32 axi_freq;
+ u32 ddr_freq;
+ u32 rom_tick_freq;
+ u32 reserved_3[3];
+};
#define is_boot_from_usb(void) (!(readl(USB_PHY0_BASE_ADDR) & (1<<20)))
#define disconnect_from_pc(void) writel(0x0, USBOTG0_RBASE + 0x140)
#define PCC_INUSE_MASK (0x1 << PCC_INUSE_OFFSET)
#define PCC_PCS_OFFSET 24
#define PCC_PCS_MASK (0x7 << PCC_PCS_OFFSET)
-#define PCC_FRAC_OFFSET 4
+#define PCC_FRAC_OFFSET 3
#define PCC_FRAC_MASK (0x1 << PCC_FRAC_OFFSET)
#define PCC_PCD_OFFSET 0
-#define PCC_PCD_MASK (0xf << PCC_PCD_OFFSET)
+#define PCC_PCD_MASK (0x7 << PCC_PCD_OFFSET)
enum pcc_clksrc_type {
void scg_a7_sys_clk_sel(enum scg_sys_src clk);
void scg_a7_info(void);
void scg_a7_soscdiv_init(void);
+void scg_a7_init_core_clk(void);
#endif
SINGLE_BOOT /* LP_BT = 0, DUAL_BT = 0 */
};
+enum boot_device get_boot_device(void);
#endif
int word;
};
-#if defined(CONFIG_SECURE_BOOT)
+#if defined(CONFIG_IMX_HAB)
extern struct imx_sec_config_fuse_t const imx_sec_config_fuse;
#endif
#define PAD_CTL_ODE (0x1 << 5)
#define PAD_CTL_PUE (0x1 << 6)
#define PAD_CTL_HYS (0x1 << 7)
+#ifdef CONFIG_IMX8MM
+#define PAD_CTL_PE (0x1 << 8)
+#else
#define PAD_CTL_LVTTL (0x1 << 8)
+#endif
#elif defined CONFIG_MX7
#define is_mx6solo() (is_cpu_type(MXC_CPU_MX6SOLO))
#define is_mx6ul() (is_cpu_type(MXC_CPU_MX6UL))
#define is_mx6ull() (is_cpu_type(MXC_CPU_MX6ULL))
+#define is_mx6ulz() (is_cpu_type(MXC_CPU_MX6ULZ))
#define is_mx6sll() (is_cpu_type(MXC_CPU_MX6SLL))
#define is_mx7ulp() (is_cpu_type(MXC_CPU_MX7ULP))
#define is_imx8mq() (is_cpu_type(MXC_CPU_IMX8MQ))
+#define is_imx8qm() (is_cpu_type(MXC_CPU_IMX8QM))
+#define is_imx8mm() (is_cpu_type(MXC_CPU_IMX8MM) || is_cpu_type(MXC_CPU_IMX8MML) ||\
+ is_cpu_type(MXC_CPU_IMX8MMD) || is_cpu_type(MXC_CPU_IMX8MMDL) || \
+ is_cpu_type(MXC_CPU_IMX8MMS) || is_cpu_type(MXC_CPU_IMX8MMSL))
+#define is_imx8mml() (is_cpu_type(MXC_CPU_IMX8MML))
+#define is_imx8mmd() (is_cpu_type(MXC_CPU_IMX8MMD))
+#define is_imx8mmdl() (is_cpu_type(MXC_CPU_IMX8MMDL))
+#define is_imx8mms() (is_cpu_type(MXC_CPU_IMX8MMS))
+#define is_imx8mmsl() (is_cpu_type(MXC_CPU_IMX8MMSL))
#define is_imx8qxp() (is_cpu_type(MXC_CPU_IMX8QXP))
#ifdef CONFIG_MX6
i.MX6/7 supports DCD and Plugin. Enable this configuration
to use Plugin, otherwise DCD will be used.
-config SECURE_BOOT
+config IMX_HAB
bool "Support i.MX HAB features"
depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX5
select FSL_CAAM if HAS_CAAM
This option enables the support for secure boot (HAB).
See doc/README.mxc_hab for more details.
+config CSF_SIZE
+ hex "Maximum size for Command Sequence File (CSF) binary"
+ default 0x2060
+ help
+ Define the maximum size for Command Sequence File (CSF) binary
+ this information is used to define the image boot data.
+
config CMD_BMODE
bool "Support the 'bmode' command"
default y
obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o
endif
obj-$(CONFIG_SATA) += sata.o
-obj-$(CONFIG_SECURE_BOOT) += hab.o
+obj-$(CONFIG_IMX_HAB) += hab.o
obj-$(CONFIG_SYSCOUNTER_TIMER) += syscounter.o
endif
ifeq ($(SOC),$(filter $(SOC),mx7ulp))
obj-y += cache.o
-obj-$(CONFIG_SECURE_BOOT) += hab.o
+obj-$(CONFIG_IMX_HAB) += hab.o
endif
ifeq ($(SOC),$(filter $(SOC),vf610))
obj-y += ddrmc-vf610.o
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,cpp_cfg)
+IMX_CONTAINER_CFG = $(CONFIG_IMX_CONTAINER_CFG:"%"=%)
+container.cfg: $(IMX_CONTAINER_CFG) FORCE
+ $(Q)mkdir -p $(dir $@)
+ $(call if_changed_dep,cpp_cfg)
+
ifeq ($(CONFIG_ARCH_IMX8), y)
CNTR_DEPFILES := $(srctree)/tools/imx_cntr_image.sh
IMAGE_TYPE := imx8image
MKIMAGEFLAGS_flash.bin = -n spl/u-boot-spl.cfgout -T $(IMAGE_TYPE) -e 0x100000
flash.bin: MKIMAGEOUTPUT = flash.log
-flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
-ifeq ($(SPL_DEPFILE_EXISTS),0)
+MKIMAGEFLAGS_u-boot.cnt = -n container.cfg -T $(IMAGE_TYPE) -e 0x100000
+u-boot.cnt: MKIMAGEOUTPUT = u-boot.cnt.log
+
+ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
+u-boot.cnt: u-boot.bin container.cfg FORCE
+ $(call if_changed,mkimage)
+flash.bin: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+ @flashbin_size=`wc -c flash.bin | awk '{print $$1}'`; \
+ pad_cnt=$$(((flashbin_size + 0x400 - 1) / 0x400)); \
+ echo "append u-boot.cnt at $$pad_cnt KB"; \
+ dd if=u-boot.cnt of=flash.bin bs=1K seek=$$pad_cnt;
+else
+flash.bin: spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
endif
endif
return CMD_RET_USAGE;
}
+#ifdef CONFIG_SYS_LONGHELP
static char nandbcb_help_text[] =
"update addr off|partition len - update 'len' bytes starting at\n"
" 'off|part' to memory address 'addr', skipping bad blocks";
+#endif
U_BOOT_CMD(nandbcb, 5, 1, do_nandbcb,
"i.MX6 Nand BCB",
const char *get_imx_type(u32 imxtype)
{
switch (imxtype) {
+ case MXC_CPU_IMX8MM:
+ return "8MMQ"; /* Quad-core version of the imx8mm */
+ case MXC_CPU_IMX8MML:
+ return "8MMQL"; /* Quad-core Lite version of the imx8mm */
+ case MXC_CPU_IMX8MMD:
+ return "8MMD"; /* Dual-core version of the imx8mm */
+ case MXC_CPU_IMX8MMDL:
+ return "8MMDL"; /* Dual-core Lite version of the imx8mm */
+ case MXC_CPU_IMX8MMS:
+ return "8MMS"; /* Single-core version of the imx8mm */
+ case MXC_CPU_IMX8MMSL:
+ return "8MMSL"; /* Single-core Lite version of the imx8mm */
case MXC_CPU_IMX8MQ:
return "8MQ"; /* Quad-core version of the imx8m */
case MXC_CPU_MX7S:
return "6UL"; /* Ultra-Lite version of the mx6 */
case MXC_CPU_MX6ULL:
return "6ULL"; /* ULL version of the mx6 */
+ case MXC_CPU_MX6ULZ:
+ return "6ULZ"; /* ULZ version of the mx6 */
case MXC_CPU_MX51:
return "51";
case MXC_CPU_MX53:
config SYS_SOC
default "imx8"
+config SPL_LOAD_IMX_CONTAINER
+ bool "Enable SPL loading U-Boot as a i.MX Container image"
+ depends on SPL
+ help
+ This is to let SPL could load i.MX8 Container image
+
+config IMX_CONTAINER_CFG
+ string "i.MX Container config file"
+ depends on SPL
+ help
+ This is to specific the cfg file for generating container
+ image which will be loaded by SPL.
+
choice
prompt "i.MX8 board select"
optional
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += cpu.o iomux.o misc.o
+obj-y += cpu.o iomux.o misc.o lowlevel_init.o
+obj-$(CONFIG_OF_SYSTEM_SETUP) += fdt.o
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SPL_LOAD_IMX_CONTAINER) += image.o parse-container.o
+endif
int node, ret;
node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "fsl,imx8-mu");
- ret = device_bind_driver_to_node(gd->dm_root, "imx8_scu", "imx8_scu",
- offset_to_ofnode(node), &devp);
+ ret = uclass_get_device_by_of_offset(UCLASS_MISC, node, &devp);
if (ret) {
- printf("could not find scu %d\n", ret);
+ printf("could not get scu %d\n", ret);
return ret;
}
- ret = device_probe(devp);
- if (ret) {
- printf("scu probe failed %d\n", ret);
- return ret;
+ if (is_imx8qm()) {
+ ret = sc_pm_set_resource_power_mode(-1, SC_R_SMMU,
+ SC_PM_PW_MODE_ON);
+ if (ret)
+ return ret;
}
return 0;
}
#endif
+#if defined(CONFIG_IMX8QM)
+#define FUSE_MAC0_WORD0 452
+#define FUSE_MAC0_WORD1 453
+#define FUSE_MAC1_WORD0 454
+#define FUSE_MAC1_WORD1 455
+#elif defined(CONFIG_IMX8QXP)
#define FUSE_MAC0_WORD0 708
#define FUSE_MAC0_WORD1 709
#define FUSE_MAC1_WORD0 710
#define FUSE_MAC1_WORD1 711
+#endif
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
{
return (id << 12) | rev;
}
-#if CONFIG_IS_ENABLED(CPU)
-struct cpu_imx_platdata {
- const char *name;
- const char *rev;
- const char *type;
- u32 cpurev;
- u32 freq_mhz;
-};
-
-const char *get_imx8_type(u32 imxtype)
-{
- switch (imxtype) {
- case MXC_CPU_IMX8QXP:
- case MXC_CPU_IMX8QXP_A0:
- return "QXP";
- case MXC_CPU_IMX8QM:
- return "QM";
- default:
- return "??";
- }
-}
-
-const char *get_imx8_rev(u32 rev)
-{
- switch (rev) {
- case CHIP_REV_A:
- return "A";
- case CHIP_REV_B:
- return "B";
- default:
- return "?";
- }
-}
-
-const char *get_core_name(void)
-{
- if (is_cortex_a35())
- return "A35";
- else if (is_cortex_a53())
- return "A53";
- else if (is_cortex_a72())
- return "A72";
- else
- return "?";
-}
-
-#if IS_ENABLED(CONFIG_IMX_SCU_THERMAL)
-static int cpu_imx_get_temp(void)
-{
- struct udevice *thermal_dev;
- int cpu_tmp, ret;
-
- ret = uclass_get_device_by_name(UCLASS_THERMAL, "cpu-thermal0",
- &thermal_dev);
-
- if (!ret) {
- ret = thermal_get_temp(thermal_dev, &cpu_tmp);
- if (ret)
- return 0xdeadbeef;
- } else {
- return 0xdeadbeef;
- }
-
- return cpu_tmp;
-}
-#else
-static int cpu_imx_get_temp(void)
-{
- return 0;
-}
-#endif
-
-int cpu_imx_get_desc(struct udevice *dev, char *buf, int size)
-{
- struct cpu_imx_platdata *plat = dev_get_platdata(dev);
- int ret;
-
- if (size < 100)
- return -ENOSPC;
-
- ret = snprintf(buf, size, "NXP i.MX8%s Rev%s %s at %u MHz",
- plat->type, plat->rev, plat->name, plat->freq_mhz);
-
- if (IS_ENABLED(CONFIG_IMX_SCU_THERMAL)) {
- buf = buf + ret;
- size = size - ret;
- ret = snprintf(buf, size, " at %dC", cpu_imx_get_temp());
- }
-
- snprintf(buf + ret, size - ret, "\n");
-
- return 0;
-}
-
-static int cpu_imx_get_info(struct udevice *dev, struct cpu_info *info)
-{
- struct cpu_imx_platdata *plat = dev_get_platdata(dev);
-
- info->cpu_freq = plat->freq_mhz * 1000;
- info->features = BIT(CPU_FEAT_L1_CACHE) | BIT(CPU_FEAT_MMU);
- return 0;
-}
-
-static int cpu_imx_get_count(struct udevice *dev)
-{
- return 4;
-}
-
-static int cpu_imx_get_vendor(struct udevice *dev, char *buf, int size)
-{
- snprintf(buf, size, "NXP");
- return 0;
-}
-
-static const struct cpu_ops cpu_imx8_ops = {
- .get_desc = cpu_imx_get_desc,
- .get_info = cpu_imx_get_info,
- .get_count = cpu_imx_get_count,
- .get_vendor = cpu_imx_get_vendor,
-};
-
-static const struct udevice_id cpu_imx8_ids[] = {
- { .compatible = "arm,cortex-a35" },
- { .compatible = "arm,cortex-a53" },
- { }
-};
-
-static ulong imx8_get_cpu_rate(void)
-{
- ulong rate;
- int ret;
- int type = is_cortex_a35() ? SC_R_A35 : is_cortex_a53() ?
- SC_R_A53 : SC_R_A72;
-
- ret = sc_pm_get_clock_rate(-1, type, SC_PM_CLK_CPU,
- (sc_pm_clock_rate_t *)&rate);
- if (ret) {
- printf("Could not read CPU frequency: %d\n", ret);
- return 0;
- }
-
- return rate;
-}
-
-static int imx8_cpu_probe(struct udevice *dev)
-{
- struct cpu_imx_platdata *plat = dev_get_platdata(dev);
- u32 cpurev;
-
- cpurev = get_cpu_rev();
- plat->cpurev = cpurev;
- plat->name = get_core_name();
- plat->rev = get_imx8_rev(cpurev & 0xFFF);
- plat->type = get_imx8_type((cpurev & 0xFF000) >> 12);
- plat->freq_mhz = imx8_get_cpu_rate() / 1000000;
- return 0;
-}
-
-U_BOOT_DRIVER(cpu_imx8_drv) = {
- .name = "imx8x_cpu",
- .id = UCLASS_CPU,
- .of_match = cpu_imx8_ids,
- .ops = &cpu_imx8_ops,
- .probe = imx8_cpu_probe,
- .platdata_auto_alloc_size = sizeof(struct cpu_imx_platdata),
- .flags = DM_FLAG_PRE_RELOC,
-};
-#endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <asm/arch/sci/sci.h>
+#include <asm/arch/sys_proto.h>
+#include <dm/ofnode.h>
+#include <fdt_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static bool check_owned_resource(sc_rsrc_t rsrc_id)
+{
+ bool owned;
+
+ owned = sc_rm_is_resource_owned(-1, rsrc_id);
+
+ return owned;
+}
+
+static int disable_fdt_node(void *blob, int nodeoffset)
+{
+ int rc, ret;
+ const char *status = "disabled";
+
+ do {
+ rc = fdt_setprop(blob, nodeoffset, "status", status,
+ strlen(status) + 1);
+ if (rc) {
+ if (rc == -FDT_ERR_NOSPACE) {
+ ret = fdt_increase_size(blob, 512);
+ if (ret)
+ return ret;
+ }
+ }
+ } while (rc == -FDT_ERR_NOSPACE);
+
+ return rc;
+}
+
+static void update_fdt_with_owned_resources(void *blob)
+{
+ /*
+ * Traverses the fdt nodes, check its power domain and use
+ * the resource id in the power domain for checking whether
+ * it is owned by current partition
+ */
+ struct fdtdec_phandle_args args;
+ int offset = 0, depth = 0;
+ u32 rsrc_id;
+ int rc, i;
+
+ for (offset = fdt_next_node(blob, offset, &depth); offset > 0;
+ offset = fdt_next_node(blob, offset, &depth)) {
+ debug("Node name: %s, depth %d\n",
+ fdt_get_name(blob, offset, NULL), depth);
+
+ if (!fdt_get_property(blob, offset, "power-domains", NULL)) {
+ debug(" - ignoring node %s\n",
+ fdt_get_name(blob, offset, NULL));
+ continue;
+ }
+
+ if (!fdtdec_get_is_enabled(blob, offset)) {
+ debug(" - ignoring node %s\n",
+ fdt_get_name(blob, offset, NULL));
+ continue;
+ }
+
+ i = 0;
+ while (true) {
+ rc = fdtdec_parse_phandle_with_args(blob, offset,
+ "power-domains",
+ "#power-domain-cells",
+ 0, i++, &args);
+ if (rc == -ENOENT) {
+ break;
+ } else if (rc) {
+ printf("Parse power-domains of %s wrong: %d\n",
+ fdt_get_name(blob, offset, NULL), rc);
+ continue;
+ }
+
+ rsrc_id = args.args[0];
+
+ if (!check_owned_resource(rsrc_id)) {
+ rc = disable_fdt_node(blob, offset);
+ if (!rc) {
+ printf("Disable %s rsrc %u not owned\n",
+ fdt_get_name(blob, offset, NULL),
+ rsrc_id);
+ } else {
+ printf("Unable to disable %s, err=%s\n",
+ fdt_get_name(blob, offset, NULL),
+ fdt_strerror(rc));
+ }
+ }
+ }
+ }
+}
+
+static int config_smmu_resource_sid(int rsrc, int sid)
+{
+ int err;
+
+ if (!check_owned_resource(rsrc)) {
+ printf("%s rsrc[%d] not owned\n", __func__, rsrc);
+ return -1;
+ }
+ err = sc_rm_set_master_sid(-1, rsrc, sid);
+ debug("set_master_sid rsrc=%d sid=0x%x err=%d\n", rsrc, sid, err);
+ if (err != SC_ERR_NONE) {
+ pr_err("fail set_master_sid rsrc=%d sid=0x%x err=%d\n", rsrc, sid, err);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int config_smmu_fdt_device_sid(void *blob, int device_offset, int sid)
+{
+ const char *name = fdt_get_name(blob, device_offset, NULL);
+ struct fdtdec_phandle_args args;
+ int rsrc, ret;
+ int proplen;
+ const fdt32_t *prop;
+ int i;
+
+ prop = fdt_getprop(blob, device_offset, "fsl,sc_rsrc_id", &proplen);
+ if (prop) {
+ int i;
+
+ debug("configure node %s sid 0x%x for %d resources\n",
+ name, sid, (int)(proplen / sizeof(fdt32_t)));
+ for (i = 0; i < proplen / sizeof(fdt32_t); ++i) {
+ ret = config_smmu_resource_sid(fdt32_to_cpu(prop[i]),
+ sid);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+ }
+
+ i = 0;
+ while (true) {
+ ret = fdtdec_parse_phandle_with_args(blob, device_offset,
+ "power-domains",
+ "#power-domain-cells",
+ 0, i++, &args);
+ if (ret == -ENOENT) {
+ break;
+ } else if (ret) {
+ printf("Parse power-domains of node %s wrong: %d\n",
+ fdt_get_name(blob, device_offset, NULL), ret);
+ continue;
+ }
+
+ debug("configure node %s sid 0x%x rsrc=%d\n",
+ name, sid, rsrc);
+ rsrc = args.args[0];
+
+ ret = config_smmu_resource_sid(rsrc, sid);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static int config_smmu_fdt(void *blob)
+{
+ int offset, proplen, i, ret;
+ const fdt32_t *prop;
+ const char *name;
+
+ /* Legacy smmu bindings, still used by xen. */
+ offset = fdt_node_offset_by_compatible(blob, 0, "arm,mmu-500");
+ prop = fdt_getprop(blob, offset, "mmu-masters", &proplen);
+ if (offset > 0 && prop) {
+ debug("found legacy mmu-masters property\n");
+
+ for (i = 0; i < proplen / 8; ++i) {
+ u32 phandle = fdt32_to_cpu(prop[2 * i]);
+ int sid = fdt32_to_cpu(prop[2 * i + 1]);
+ int device_offset;
+
+ device_offset = fdt_node_offset_by_phandle(blob,
+ phandle);
+ if (device_offset < 0) {
+ pr_err("Not find device from mmu_masters: %d",
+ device_offset);
+ continue;
+ }
+ ret = config_smmu_fdt_device_sid(blob, device_offset,
+ sid);
+ if (ret)
+ return ret;
+ }
+
+ /* Ignore new bindings if old bindings found, just like linux. */
+ return 0;
+ }
+
+ /* Generic smmu bindings */
+ offset = 0;
+ while ((offset = fdt_next_node(blob, offset, NULL)) > 0) {
+ name = fdt_get_name(blob, offset, NULL);
+ prop = fdt_getprop(blob, offset, "iommus", &proplen);
+ if (!prop)
+ continue;
+ debug("node %s iommus proplen %d\n", name, proplen);
+
+ if (proplen == 12) {
+ int sid = fdt32_to_cpu(prop[1]);
+
+ config_smmu_fdt_device_sid(blob, offset, sid);
+ } else if (proplen != 4) {
+ debug("node %s ignore unexpected iommus proplen=%d\n",
+ name, proplen);
+ }
+ }
+
+ return 0;
+}
+
+static int ft_add_optee_node(void *fdt, bd_t *bd)
+{
+ const char *path, *subpath;
+ int offs;
+
+ /*
+ * No TEE space allocated indicating no TEE running, so no
+ * need to add optee node in dts
+ */
+ if (!boot_pointer[1])
+ return 0;
+
+ offs = fdt_increase_size(fdt, 512);
+ if (offs) {
+ printf("No Space for dtb\n");
+ return 1;
+ }
+
+ path = "/firmware";
+ offs = fdt_path_offset(fdt, path);
+ if (offs < 0) {
+ path = "/";
+ offs = fdt_path_offset(fdt, path);
+
+ if (offs < 0) {
+ printf("Could not find root node.\n");
+ return offs;
+ }
+
+ subpath = "firmware";
+ offs = fdt_add_subnode(fdt, offs, subpath);
+ if (offs < 0) {
+ printf("Could not create %s node.\n", subpath);
+ return offs;
+ }
+ }
+
+ subpath = "optee";
+ offs = fdt_add_subnode(fdt, offs, subpath);
+ if (offs < 0) {
+ printf("Could not create %s node.\n", subpath);
+ return offs;
+ }
+
+ fdt_setprop_string(fdt, offs, "compatible", "linaro,optee-tz");
+ fdt_setprop_string(fdt, offs, "method", "smc");
+
+ return 0;
+}
+
+int ft_system_setup(void *blob, bd_t *bd)
+{
+ int ret;
+
+ update_fdt_with_owned_resources(blob);
+
+ if (is_imx8qm()) {
+ ret = config_smmu_fdt(blob);
+ if (ret)
+ return ret;
+ }
+
+ return ft_add_optee_node(blob, bd);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <mmc.h>
+#include <spi_flash.h>
+#include <nand.h>
+#include <asm/arch/image.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/boot_mode.h>
+
+#define MMC_DEV 0
+#define QSPI_DEV 1
+#define NAND_DEV 2
+#define QSPI_NOR_DEV 3
+
+static int __get_container_size(ulong addr)
+{
+ struct container_hdr *phdr;
+ struct boot_img_t *img_entry;
+ struct signature_block_hdr *sign_hdr;
+ u8 i = 0;
+ u32 max_offset = 0, img_end;
+
+ phdr = (struct container_hdr *)addr;
+ if (phdr->tag != 0x87 && phdr->version != 0x0) {
+ debug("Wrong container header\n");
+ return -EFAULT;
+ }
+
+ max_offset = sizeof(struct container_hdr);
+
+ img_entry = (struct boot_img_t *)(addr + sizeof(struct container_hdr));
+ for (i = 0; i < phdr->num_images; i++) {
+ img_end = img_entry->offset + img_entry->size;
+ if (img_end > max_offset)
+ max_offset = img_end;
+
+ debug("img[%u], end = 0x%x\n", i, img_end);
+
+ img_entry++;
+ }
+
+ if (phdr->sig_blk_offset != 0) {
+ sign_hdr = (struct signature_block_hdr *)(addr + phdr->sig_blk_offset);
+ u16 len = sign_hdr->length_lsb + (sign_hdr->length_msb << 8);
+
+ if (phdr->sig_blk_offset + len > max_offset)
+ max_offset = phdr->sig_blk_offset + len;
+
+ debug("sigblk, end = 0x%x\n", phdr->sig_blk_offset + len);
+ }
+
+ return max_offset;
+}
+
+static int get_container_size(void *dev, int dev_type, unsigned long offset)
+{
+ u8 *buf = malloc(CONTAINER_HDR_ALIGNMENT);
+ int ret = 0;
+
+ if (!buf) {
+ printf("Malloc buffer failed\n");
+ return -ENOMEM;
+ }
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+ if (dev_type == MMC_DEV) {
+ unsigned long count = 0;
+ struct mmc *mmc = (struct mmc *)dev;
+
+ count = blk_dread(mmc_get_blk_desc(mmc),
+ offset / mmc->read_bl_len,
+ CONTAINER_HDR_ALIGNMENT / mmc->read_bl_len,
+ buf);
+ if (count == 0) {
+ printf("Read container image from MMC/SD failed\n");
+ return -EIO;
+ }
+ }
+#endif
+
+#ifdef CONFIG_SPL_SPI_LOAD
+ if (dev_type == QSPI_DEV) {
+ struct spi_flash *flash = (struct spi_flash *)dev;
+
+ ret = spi_flash_read(flash, offset,
+ CONTAINER_HDR_ALIGNMENT, buf);
+ if (ret != 0) {
+ printf("Read container image from QSPI failed\n");
+ return -EIO;
+ }
+ }
+#endif
+
+#ifdef CONFIG_SPL_NAND_SUPPORT
+ if (dev_type == NAND_DEV) {
+ ret = nand_spl_load_image(offset, CONTAINER_HDR_ALIGNMENT,
+ buf);
+ if (ret != 0) {
+ printf("Read container image from NAND failed\n");
+ return -EIO;
+ }
+ }
+#endif
+
+#ifdef CONFIG_SPL_NOR_SUPPORT
+ if (dev_type == QSPI_NOR_DEV)
+ memcpy(buf, (const void *)offset, CONTAINER_HDR_ALIGNMENT);
+#endif
+
+ ret = __get_container_size((ulong)buf);
+
+ free(buf);
+
+ return ret;
+}
+
+static unsigned long get_boot_device_offset(void *dev, int dev_type)
+{
+ unsigned long offset = 0;
+
+ if (dev_type == MMC_DEV) {
+ struct mmc *mmc = (struct mmc *)dev;
+
+ if (IS_SD(mmc) || mmc->part_config == MMCPART_NOAVAILABLE) {
+ offset = CONTAINER_HDR_MMCSD_OFFSET;
+ } else {
+ u8 part = EXT_CSD_EXTRACT_BOOT_PART(mmc->part_config);
+
+ if (part == 1 || part == 2) {
+ if (is_imx8qxp() && is_soc_rev(CHIP_REV_B))
+ offset = CONTAINER_HDR_MMCSD_OFFSET;
+ else
+ offset = CONTAINER_HDR_EMMC_OFFSET;
+ } else {
+ offset = CONTAINER_HDR_MMCSD_OFFSET;
+ }
+ }
+ } else if (dev_type == QSPI_DEV) {
+ offset = CONTAINER_HDR_QSPI_OFFSET;
+ } else if (dev_type == NAND_DEV) {
+ offset = CONTAINER_HDR_NAND_OFFSET;
+ } else if (dev_type == QSPI_NOR_DEV) {
+ offset = CONTAINER_HDR_QSPI_OFFSET + 0x08000000;
+ }
+
+ return offset;
+}
+
+static int get_imageset_end(void *dev, int dev_type)
+{
+ unsigned long offset1 = 0, offset2 = 0;
+ int value_container[2];
+
+ offset1 = get_boot_device_offset(dev, dev_type);
+ offset2 = CONTAINER_HDR_ALIGNMENT + offset1;
+
+ value_container[0] = get_container_size(dev, dev_type, offset1);
+ if (value_container[0] < 0) {
+ printf("Parse seco container failed %d\n", value_container[0]);
+ return value_container[0];
+ }
+
+ debug("seco container size 0x%x\n", value_container[0]);
+
+ value_container[1] = get_container_size(dev, dev_type, offset2);
+ if (value_container[1] < 0) {
+ debug("Parse scu container failed %d, only seco container\n",
+ value_container[1]);
+ /* return seco container total size */
+ return value_container[0] + offset1;
+ }
+
+ debug("scu container size 0x%x\n", value_container[1]);
+
+ return value_container[1] + offset2;
+}
+
+#ifdef CONFIG_SPL_SPI_LOAD
+unsigned long spl_spi_get_uboot_offs(struct spi_flash *flash)
+{
+ int end;
+
+ end = get_imageset_end(flash, QSPI_DEV);
+ end = ROUND(end, SZ_1K);
+
+ printf("Load image from QSPI 0x%x\n", end);
+
+ return end;
+}
+#endif
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+unsigned long spl_mmc_get_uboot_raw_sector(struct mmc *mmc)
+{
+ int end;
+
+ end = get_imageset_end(mmc, MMC_DEV);
+ end = ROUND(end, SZ_1K);
+
+ printf("Load image from MMC/SD 0x%x\n", end);
+
+ return end / mmc->read_bl_len;
+}
+#endif
+
+#ifdef CONFIG_SPL_NAND_SUPPORT
+uint32_t spl_nand_get_uboot_raw_page(void)
+{
+ int end;
+
+ end = get_imageset_end((void *)NULL, NAND_DEV);
+ end = ROUND(end, SZ_16K);
+
+ printf("Load image from NAND 0x%x\n", end);
+
+ return end;
+}
+#endif
+
+#ifdef CONFIG_SPL_NOR_SUPPORT
+unsigned long spl_nor_get_uboot_base(void)
+{
+ int end;
+
+ /* Calculate the image set end,
+ * if it is less than CONFIG_SYS_UBOOT_BASE(0x8281000),
+ * we use CONFIG_SYS_UBOOT_BASE
+ * Otherwise, use the calculated address
+ */
+ end = get_imageset_end((void *)NULL, QSPI_NOR_DEV);
+ if (end <= CONFIG_SYS_UBOOT_BASE)
+ end = CONFIG_SYS_UBOOT_BASE;
+ else
+ end = ROUND(end, SZ_1K);
+
+ printf("Load image from NOR 0x%x\n", end);
+
+ return end;
+}
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <config.h>
+
+.align 8
+.global boot_pointer
+boot_pointer:
+ .space 32
+
+/*
+ * Routine: save_boot_params (called after reset from start.S)
+ */
+
+.global save_boot_params
+save_boot_params:
+ /* The firmware provided ATAG/FDT address can be found in r2/x0 */
+ adr x0, boot_pointer
+ stp x1, x2, [x0], #16
+ stp x3, x4, [x0], #16
+
+ /*
+ * We use absolute address not PC relative address for return.
+ * When running SPL on iMX8, the A core starts at address 0,
+ * an alias to OCRAM 0x100000, our linker address for SPL is
+ * from 0x100000. So using absolute address can jump to the OCRAM
+ * address from the alias. The alias only map first 96KB of OCRAM,
+ * so this require the SPL size can't beyond 96KB.
+ * But when using SPL DM, the size increase significantly and
+ * always beyonds 96KB. That's why we have to jump to OCRAM.
+ * Normal u-boot also runs into this codes, but there is no impact.
+ */
+ ldr x1, =save_boot_params_ret
+ br x1
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/image.h>
+
+static struct boot_img_t *read_auth_image(struct spl_image_info *spl_image,
+ struct spl_load_info *info,
+ struct container_hdr *container,
+ int image_index,
+ u32 container_sector)
+{
+ struct boot_img_t *images;
+ ulong sector;
+ u32 sectors;
+
+ if (image_index > container->num_images) {
+ debug("Invalid image number\n");
+ return NULL;
+ }
+
+ images = (struct boot_img_t *)((u8 *)container +
+ sizeof(struct container_hdr));
+
+ if (images[image_index].offset % info->bl_len) {
+ printf("%s: image%d offset not aligned to %u\n",
+ __func__, image_index, info->bl_len);
+ return NULL;
+ }
+
+ sectors = roundup(images[image_index].size, info->bl_len) /
+ info->bl_len;
+ sector = images[image_index].offset / info->bl_len +
+ container_sector;
+
+ debug("%s: container: %p sector: %lu sectors: %u\n", __func__,
+ container, sector, sectors);
+ if (info->read(info, sector, sectors,
+ (void *)images[image_index].entry) != sectors) {
+ printf("%s wrong\n", __func__);
+ return NULL;
+ }
+
+ return &images[image_index];
+}
+
+static int read_auth_container(struct spl_image_info *spl_image,
+ struct spl_load_info *info, ulong sector)
+{
+ struct container_hdr *container = NULL;
+ u16 length;
+ u32 sectors;
+ int i, size;
+
+ size = roundup(CONTAINER_HDR_ALIGNMENT, info->bl_len);
+ sectors = size / info->bl_len;
+
+ /*
+ * It will not override the ATF code, so safe to use it here,
+ * no need malloc
+ */
+ container = (struct container_hdr *)spl_get_load_buffer(-size, size);
+
+ debug("%s: container: %p sector: %lu sectors: %u\n", __func__,
+ container, sector, sectors);
+ if (info->read(info, sector, sectors, container) != sectors)
+ return -EIO;
+
+ if (container->tag != 0x87 && container->version != 0x0) {
+ printf("Wrong container header");
+ return -ENOENT;
+ }
+
+ if (!container->num_images) {
+ printf("Wrong container, no image found");
+ return -ENOENT;
+ }
+
+ length = container->length_lsb + (container->length_msb << 8);
+ debug("Container length %u\n", length);
+
+ if (length > CONTAINER_HDR_ALIGNMENT) {
+ size = roundup(length, info->bl_len);
+ sectors = size / info->bl_len;
+
+ container = (struct container_hdr *)spl_get_load_buffer(-size, size);
+
+ debug("%s: container: %p sector: %lu sectors: %u\n",
+ __func__, container, sector, sectors);
+ if (info->read(info, sector, sectors, container) !=
+ sectors)
+ return -EIO;
+ }
+
+ for (i = 0; i < container->num_images; i++) {
+ struct boot_img_t *image = read_auth_image(spl_image, info,
+ container, i,
+ sector);
+
+ if (!image)
+ return -EINVAL;
+
+ if (i == 0) {
+ spl_image->load_addr = image->dst;
+ spl_image->entry_point = image->entry;
+ }
+ }
+
+ return 0;
+}
+
+int spl_load_imx_container(struct spl_image_info *spl_image,
+ struct spl_load_info *info, ulong sector)
+{
+ return read_auth_container(spl_image, info, sector);
+}
bool
select ROM_UNIFIED_SECTIONS
+config IMX8MQ
+ bool
+ select IMX8M
+
+config IMX8MM
+ bool
+ select IMX8M
+
config SYS_SOC
default "imx8m"
config TARGET_IMX8MQ_EVK
bool "imx8mq_evk"
- select IMX8M
+ select IMX8MQ
+ select IMX8M_LPDDR4
+
+config TARGET_IMX8MM_EVK
+ bool "imx8mm LPDDR4 EVK board"
+ select IMX8MM
+ select SUPPORT_SPL
select IMX8M_LPDDR4
endchoice
source "board/freescale/imx8mq_evk/Kconfig"
+source "board/freescale/imx8mm_evk/Kconfig"
endif
# Copyright 2017 NXP
obj-y += lowlevel_init.o
-obj-y += clock.o clock_slice.o soc.o
+obj-y += clock_slice.o soc.o
+obj-$(CONFIG_IMX8MQ) += clock_imx8mq.o
+obj-$(CONFIG_IMX8MM) += clock_imx8mm.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2017 NXP
- *
- * Peng Fan <peng.fan@nxp.com>
- */
-
-#include <common.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/io.h>
-#include <asm/arch/sys_proto.h>
-#include <errno.h>
-#include <linux/iopoll.h>
-
-static struct anamix_pll *ana_pll = (struct anamix_pll *)ANATOP_BASE_ADDR;
-
-static u32 decode_frac_pll(enum clk_root_src frac_pll)
-{
- u32 pll_cfg0, pll_cfg1, pllout;
- u32 pll_refclk_sel, pll_refclk;
- u32 divr_val, divq_val, divf_val, divff, divfi;
- u32 pllout_div_shift, pllout_div_mask, pllout_div;
-
- switch (frac_pll) {
- case ARM_PLL_CLK:
- pll_cfg0 = readl(&ana_pll->arm_pll_cfg0);
- pll_cfg1 = readl(&ana_pll->arm_pll_cfg1);
- pllout_div_shift = HW_FRAC_ARM_PLL_DIV_SHIFT;
- pllout_div_mask = HW_FRAC_ARM_PLL_DIV_MASK;
- break;
- default:
- printf("Frac PLL %d not supporte\n", frac_pll);
- return 0;
- }
-
- pllout_div = readl(&ana_pll->frac_pllout_div_cfg);
- pllout_div = (pllout_div & pllout_div_mask) >> pllout_div_shift;
-
- /* Power down */
- if (pll_cfg0 & FRAC_PLL_PD_MASK)
- return 0;
-
- /* output not enabled */
- if ((pll_cfg0 & FRAC_PLL_CLKE_MASK) == 0)
- return 0;
-
- pll_refclk_sel = pll_cfg0 & FRAC_PLL_REFCLK_SEL_MASK;
-
- if (pll_refclk_sel == FRAC_PLL_REFCLK_SEL_OSC_25M)
- pll_refclk = 25000000u;
- else if (pll_refclk_sel == FRAC_PLL_REFCLK_SEL_OSC_27M)
- pll_refclk = 27000000u;
- else if (pll_refclk_sel == FRAC_PLL_REFCLK_SEL_HDMI_PHY_27M)
- pll_refclk = 27000000u;
- else
- pll_refclk = 0;
-
- if (pll_cfg0 & FRAC_PLL_BYPASS_MASK)
- return pll_refclk;
-
- divr_val = (pll_cfg0 & FRAC_PLL_REFCLK_DIV_VAL_MASK) >>
- FRAC_PLL_REFCLK_DIV_VAL_SHIFT;
- divq_val = pll_cfg0 & FRAC_PLL_OUTPUT_DIV_VAL_MASK;
-
- divff = (pll_cfg1 & FRAC_PLL_FRAC_DIV_CTL_MASK) >>
- FRAC_PLL_FRAC_DIV_CTL_SHIFT;
- divfi = pll_cfg1 & FRAC_PLL_INT_DIV_CTL_MASK;
-
- divf_val = 1 + divfi + divff / (1 << 24);
-
- pllout = pll_refclk / (divr_val + 1) * 8 * divf_val /
- ((divq_val + 1) * 2);
-
- return pllout / (pllout_div + 1);
-}
-
-static u32 decode_sscg_pll(enum clk_root_src sscg_pll)
-{
- u32 pll_cfg0, pll_cfg1, pll_cfg2;
- u32 pll_refclk_sel, pll_refclk;
- u32 divr1, divr2, divf1, divf2, divq, div;
- u32 sse;
- u32 pll_clke;
- u32 pllout_div_shift, pllout_div_mask, pllout_div;
- u32 pllout;
-
- switch (sscg_pll) {
- case SYSTEM_PLL1_800M_CLK:
- case SYSTEM_PLL1_400M_CLK:
- case SYSTEM_PLL1_266M_CLK:
- case SYSTEM_PLL1_200M_CLK:
- case SYSTEM_PLL1_160M_CLK:
- case SYSTEM_PLL1_133M_CLK:
- case SYSTEM_PLL1_100M_CLK:
- case SYSTEM_PLL1_80M_CLK:
- case SYSTEM_PLL1_40M_CLK:
- pll_cfg0 = readl(&ana_pll->sys_pll1_cfg0);
- pll_cfg1 = readl(&ana_pll->sys_pll1_cfg1);
- pll_cfg2 = readl(&ana_pll->sys_pll1_cfg2);
- pllout_div_shift = HW_SSCG_SYSTEM_PLL1_DIV_SHIFT;
- pllout_div_mask = HW_SSCG_SYSTEM_PLL1_DIV_MASK;
- break;
- case SYSTEM_PLL2_1000M_CLK:
- case SYSTEM_PLL2_500M_CLK:
- case SYSTEM_PLL2_333M_CLK:
- case SYSTEM_PLL2_250M_CLK:
- case SYSTEM_PLL2_200M_CLK:
- case SYSTEM_PLL2_166M_CLK:
- case SYSTEM_PLL2_125M_CLK:
- case SYSTEM_PLL2_100M_CLK:
- case SYSTEM_PLL2_50M_CLK:
- pll_cfg0 = readl(&ana_pll->sys_pll2_cfg0);
- pll_cfg1 = readl(&ana_pll->sys_pll2_cfg1);
- pll_cfg2 = readl(&ana_pll->sys_pll2_cfg2);
- pllout_div_shift = HW_SSCG_SYSTEM_PLL2_DIV_SHIFT;
- pllout_div_mask = HW_SSCG_SYSTEM_PLL2_DIV_MASK;
- break;
- case SYSTEM_PLL3_CLK:
- pll_cfg0 = readl(&ana_pll->sys_pll3_cfg0);
- pll_cfg1 = readl(&ana_pll->sys_pll3_cfg1);
- pll_cfg2 = readl(&ana_pll->sys_pll3_cfg2);
- pllout_div_shift = HW_SSCG_SYSTEM_PLL3_DIV_SHIFT;
- pllout_div_mask = HW_SSCG_SYSTEM_PLL3_DIV_MASK;
- break;
- case DRAM_PLL1_CLK:
- pll_cfg0 = readl(&ana_pll->dram_pll_cfg0);
- pll_cfg1 = readl(&ana_pll->dram_pll_cfg1);
- pll_cfg2 = readl(&ana_pll->dram_pll_cfg2);
- pllout_div_shift = HW_SSCG_DRAM_PLL_DIV_SHIFT;
- pllout_div_mask = HW_SSCG_DRAM_PLL_DIV_MASK;
- break;
- default:
- printf("sscg pll %d not supporte\n", sscg_pll);
- return 0;
- }
-
- switch (sscg_pll) {
- case DRAM_PLL1_CLK:
- pll_clke = SSCG_PLL_DRAM_PLL_CLKE_MASK;
- div = 1;
- break;
- case SYSTEM_PLL3_CLK:
- pll_clke = SSCG_PLL_PLL3_CLKE_MASK;
- div = 1;
- break;
- case SYSTEM_PLL2_1000M_CLK:
- case SYSTEM_PLL1_800M_CLK:
- pll_clke = SSCG_PLL_CLKE_MASK;
- div = 1;
- break;
- case SYSTEM_PLL2_500M_CLK:
- case SYSTEM_PLL1_400M_CLK:
- pll_clke = SSCG_PLL_DIV2_CLKE_MASK;
- div = 2;
- break;
- case SYSTEM_PLL2_333M_CLK:
- case SYSTEM_PLL1_266M_CLK:
- pll_clke = SSCG_PLL_DIV3_CLKE_MASK;
- div = 3;
- break;
- case SYSTEM_PLL2_250M_CLK:
- case SYSTEM_PLL1_200M_CLK:
- pll_clke = SSCG_PLL_DIV4_CLKE_MASK;
- div = 4;
- break;
- case SYSTEM_PLL2_200M_CLK:
- case SYSTEM_PLL1_160M_CLK:
- pll_clke = SSCG_PLL_DIV5_CLKE_MASK;
- div = 5;
- break;
- case SYSTEM_PLL2_166M_CLK:
- case SYSTEM_PLL1_133M_CLK:
- pll_clke = SSCG_PLL_DIV6_CLKE_MASK;
- div = 6;
- break;
- case SYSTEM_PLL2_125M_CLK:
- case SYSTEM_PLL1_100M_CLK:
- pll_clke = SSCG_PLL_DIV8_CLKE_MASK;
- div = 8;
- break;
- case SYSTEM_PLL2_100M_CLK:
- case SYSTEM_PLL1_80M_CLK:
- pll_clke = SSCG_PLL_DIV10_CLKE_MASK;
- div = 10;
- break;
- case SYSTEM_PLL2_50M_CLK:
- case SYSTEM_PLL1_40M_CLK:
- pll_clke = SSCG_PLL_DIV20_CLKE_MASK;
- div = 20;
- break;
- default:
- printf("sscg pll %d not supporte\n", sscg_pll);
- return 0;
- }
-
- /* Power down */
- if (pll_cfg0 & SSCG_PLL_PD_MASK)
- return 0;
-
- /* output not enabled */
- if ((pll_cfg0 & pll_clke) == 0)
- return 0;
-
- pllout_div = readl(&ana_pll->sscg_pllout_div_cfg);
- pllout_div = (pllout_div & pllout_div_mask) >> pllout_div_shift;
-
- pll_refclk_sel = pll_cfg0 & SSCG_PLL_REFCLK_SEL_MASK;
-
- if (pll_refclk_sel == SSCG_PLL_REFCLK_SEL_OSC_25M)
- pll_refclk = 25000000u;
- else if (pll_refclk_sel == SSCG_PLL_REFCLK_SEL_OSC_27M)
- pll_refclk = 27000000u;
- else if (pll_refclk_sel == SSCG_PLL_REFCLK_SEL_HDMI_PHY_27M)
- pll_refclk = 27000000u;
- else
- pll_refclk = 0;
-
- /* We assume bypass1/2 are the same value */
- if ((pll_cfg0 & SSCG_PLL_BYPASS1_MASK) ||
- (pll_cfg0 & SSCG_PLL_BYPASS2_MASK))
- return pll_refclk;
-
- divr1 = (pll_cfg2 & SSCG_PLL_REF_DIVR1_MASK) >>
- SSCG_PLL_REF_DIVR1_SHIFT;
- divr2 = (pll_cfg2 & SSCG_PLL_REF_DIVR2_MASK) >>
- SSCG_PLL_REF_DIVR2_SHIFT;
- divf1 = (pll_cfg2 & SSCG_PLL_FEEDBACK_DIV_F1_MASK) >>
- SSCG_PLL_FEEDBACK_DIV_F1_SHIFT;
- divf2 = (pll_cfg2 & SSCG_PLL_FEEDBACK_DIV_F2_MASK) >>
- SSCG_PLL_FEEDBACK_DIV_F2_SHIFT;
- divq = (pll_cfg2 & SSCG_PLL_OUTPUT_DIV_VAL_MASK) >>
- SSCG_PLL_OUTPUT_DIV_VAL_SHIFT;
- sse = pll_cfg1 & SSCG_PLL_SSE_MASK;
-
- if (sse)
- sse = 8;
- else
- sse = 2;
-
- pllout = pll_refclk / (divr1 + 1) * sse * (divf1 + 1) /
- (divr2 + 1) * (divf2 + 1) / (divq + 1);
-
- return pllout / (pllout_div + 1) / div;
-}
-
-static u32 get_root_src_clk(enum clk_root_src root_src)
-{
- switch (root_src) {
- case OSC_25M_CLK:
- return 25000000;
- case OSC_27M_CLK:
- return 27000000;
- case OSC_32K_CLK:
- return 32768;
- case ARM_PLL_CLK:
- return decode_frac_pll(root_src);
- case SYSTEM_PLL1_800M_CLK:
- case SYSTEM_PLL1_400M_CLK:
- case SYSTEM_PLL1_266M_CLK:
- case SYSTEM_PLL1_200M_CLK:
- case SYSTEM_PLL1_160M_CLK:
- case SYSTEM_PLL1_133M_CLK:
- case SYSTEM_PLL1_100M_CLK:
- case SYSTEM_PLL1_80M_CLK:
- case SYSTEM_PLL1_40M_CLK:
- case SYSTEM_PLL2_1000M_CLK:
- case SYSTEM_PLL2_500M_CLK:
- case SYSTEM_PLL2_333M_CLK:
- case SYSTEM_PLL2_250M_CLK:
- case SYSTEM_PLL2_200M_CLK:
- case SYSTEM_PLL2_166M_CLK:
- case SYSTEM_PLL2_125M_CLK:
- case SYSTEM_PLL2_100M_CLK:
- case SYSTEM_PLL2_50M_CLK:
- case SYSTEM_PLL3_CLK:
- return decode_sscg_pll(root_src);
- default:
- return 0;
- }
-
- return 0;
-}
-
-static u32 get_root_clk(enum clk_root_index clock_id)
-{
- enum clk_root_src root_src;
- u32 post_podf, pre_podf, root_src_clk;
-
- if (clock_root_enabled(clock_id) <= 0)
- return 0;
-
- if (clock_get_prediv(clock_id, &pre_podf) < 0)
- return 0;
-
- if (clock_get_postdiv(clock_id, &post_podf) < 0)
- return 0;
-
- if (clock_get_src(clock_id, &root_src) < 0)
- return 0;
-
- root_src_clk = get_root_src_clk(root_src);
-
- return root_src_clk / (post_podf + 1) / (pre_podf + 1);
-}
-
-#ifdef CONFIG_MXC_OCOTP
-void enable_ocotp_clk(unsigned char enable)
-{
- clock_enable(CCGR_OCOTP, !!enable);
-}
-#endif
-
-int enable_i2c_clk(unsigned char enable, unsigned int i2c_num)
-{
- /* 0 - 3 is valid i2c num */
- if (i2c_num > 3)
- return -EINVAL;
-
- clock_enable(CCGR_I2C1 + i2c_num, !!enable);
-
- return 0;
-}
-
-unsigned int mxc_get_clock(enum clk_root_index clk)
-{
- u32 val;
-
- if (clk >= CLK_ROOT_MAX)
- return 0;
-
- if (clk == MXC_ARM_CLK)
- return get_root_clk(ARM_A53_CLK_ROOT);
-
- if (clk == MXC_IPG_CLK) {
- clock_get_target_val(IPG_CLK_ROOT, &val);
- val = val & 0x3;
- return get_root_clk(AHB_CLK_ROOT) / (val + 1);
- }
-
- return get_root_clk(clk);
-}
-
-u32 imx_get_uartclk(void)
-{
- return mxc_get_clock(UART1_CLK_ROOT);
-}
-
-void mxs_set_lcdclk(u32 base_addr, u32 freq)
-{
- /*
- * LCDIF_PIXEL_CLK: select 800MHz root clock,
- * select pre divider 8, output is 100 MHz
- */
- clock_set_target_val(LCDIF_PIXEL_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(4) |
- CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV8));
-}
-
-void init_wdog_clk(void)
-{
- clock_enable(CCGR_WDOG1, 0);
- clock_enable(CCGR_WDOG2, 0);
- clock_enable(CCGR_WDOG3, 0);
- clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(0));
- clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(0));
- clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(0));
- clock_enable(CCGR_WDOG1, 1);
- clock_enable(CCGR_WDOG2, 1);
- clock_enable(CCGR_WDOG3, 1);
-}
-
-void init_usb_clk(void)
-{
- if (!is_usb_boot()) {
- clock_enable(CCGR_USB_CTRL1, 0);
- clock_enable(CCGR_USB_CTRL2, 0);
- clock_enable(CCGR_USB_PHY1, 0);
- clock_enable(CCGR_USB_PHY2, 0);
- /* 500MHz */
- clock_set_target_val(USB_BUS_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(1));
- /* 100MHz */
- clock_set_target_val(USB_CORE_REF_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(1));
- /* 100MHz */
- clock_set_target_val(USB_PHY_REF_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(1));
- clock_enable(CCGR_USB_CTRL1, 1);
- clock_enable(CCGR_USB_CTRL2, 1);
- clock_enable(CCGR_USB_PHY1, 1);
- clock_enable(CCGR_USB_PHY2, 1);
- }
-}
-
-void init_uart_clk(u32 index)
-{
- /* Set uart clock root 25M OSC */
- switch (index) {
- case 0:
- clock_enable(CCGR_UART1, 0);
- clock_set_target_val(UART1_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(0));
- clock_enable(CCGR_UART1, 1);
- return;
- case 1:
- clock_enable(CCGR_UART2, 0);
- clock_set_target_val(UART2_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(0));
- clock_enable(CCGR_UART2, 1);
- return;
- case 2:
- clock_enable(CCGR_UART3, 0);
- clock_set_target_val(UART3_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(0));
- clock_enable(CCGR_UART3, 1);
- return;
- case 3:
- clock_enable(CCGR_UART4, 0);
- clock_set_target_val(UART4_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(0));
- clock_enable(CCGR_UART4, 1);
- return;
- default:
- printf("Invalid uart index\n");
- return;
- }
-}
-
-void init_clk_usdhc(u32 index)
-{
- /*
- * set usdhc clock root
- * sys pll1 400M
- */
- switch (index) {
- case 0:
- clock_enable(CCGR_USDHC1, 0);
- clock_set_target_val(USDHC1_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(1) |
- CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2));
- clock_enable(CCGR_USDHC1, 1);
- return;
- case 1:
- clock_enable(CCGR_USDHC2, 0);
- clock_set_target_val(USDHC2_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(1) |
- CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2));
- clock_enable(CCGR_USDHC2, 1);
- return;
- default:
- printf("Invalid usdhc index\n");
- return;
- }
-}
-
-int set_clk_qspi(void)
-{
- /*
- * set qspi root
- * sys pll1 100M
- */
- clock_enable(CCGR_QSPI, 0);
- clock_set_target_val(QSPI_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(7));
- clock_enable(CCGR_QSPI, 1);
-
- return 0;
-}
-
-#ifdef CONFIG_FEC_MXC
-int set_clk_enet(enum enet_freq type)
-{
- u32 target;
- u32 enet1_ref;
-
- switch (type) {
- case ENET_125MHZ:
- enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK;
- break;
- case ENET_50MHZ:
- enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK;
- break;
- case ENET_25MHZ:
- enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK;
- break;
- default:
- return -EINVAL;
- }
-
- /* disable the clock first */
- clock_enable(CCGR_ENET1, 0);
- clock_enable(CCGR_SIM_ENET, 0);
-
- /* set enet axi clock 266Mhz */
- target = CLK_ROOT_ON | ENET_AXI_CLK_ROOT_FROM_SYS1_PLL_266M |
- CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
- CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
- clock_set_target_val(ENET_AXI_CLK_ROOT, target);
-
- target = CLK_ROOT_ON | enet1_ref |
- CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
- CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
- clock_set_target_val(ENET_REF_CLK_ROOT, target);
-
- target = CLK_ROOT_ON |
- ENET1_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK |
- CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
- CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
- clock_set_target_val(ENET_TIMER_CLK_ROOT, target);
-
- /* enable clock */
- clock_enable(CCGR_SIM_ENET, 1);
- clock_enable(CCGR_ENET1, 1);
-
- return 0;
-}
-#endif
-
-u32 imx_get_fecclk(void)
-{
- return get_root_clk(ENET_AXI_CLK_ROOT);
-}
-
-static struct dram_bypass_clk_setting imx8mq_dram_bypass_tbl[] = {
- DRAM_BYPASS_ROOT_CONFIG(MHZ(100), 2, CLK_ROOT_PRE_DIV1, 2,
- CLK_ROOT_PRE_DIV2),
- DRAM_BYPASS_ROOT_CONFIG(MHZ(250), 3, CLK_ROOT_PRE_DIV2, 2,
- CLK_ROOT_PRE_DIV2),
- DRAM_BYPASS_ROOT_CONFIG(MHZ(400), 1, CLK_ROOT_PRE_DIV2, 3,
- CLK_ROOT_PRE_DIV2),
-};
-
-void dram_enable_bypass(ulong clk_val)
-{
- int i;
- struct dram_bypass_clk_setting *config;
-
- for (i = 0; i < ARRAY_SIZE(imx8mq_dram_bypass_tbl); i++) {
- if (clk_val == imx8mq_dram_bypass_tbl[i].clk)
- break;
- }
-
- if (i == ARRAY_SIZE(imx8mq_dram_bypass_tbl)) {
- printf("No matched freq table %lu\n", clk_val);
- return;
- }
-
- config = &imx8mq_dram_bypass_tbl[i];
-
- clock_set_target_val(DRAM_ALT_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(config->alt_root_sel) |
- CLK_ROOT_PRE_DIV(config->alt_pre_div));
- clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(config->apb_root_sel) |
- CLK_ROOT_PRE_DIV(config->apb_pre_div));
- clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(1));
-}
-
-void dram_disable_bypass(void)
-{
- clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(0));
- clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(4) |
- CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV5));
-}
-
-#ifdef CONFIG_SPL_BUILD
-void dram_pll_init(ulong pll_val)
-{
- u32 val;
- void __iomem *pll_control_reg = &ana_pll->dram_pll_cfg0;
- void __iomem *pll_cfg_reg2 = &ana_pll->dram_pll_cfg2;
-
- /* Bypass */
- setbits_le32(pll_control_reg, SSCG_PLL_BYPASS1_MASK);
- setbits_le32(pll_control_reg, SSCG_PLL_BYPASS2_MASK);
-
- switch (pll_val) {
- case MHZ(800):
- val = readl(pll_cfg_reg2);
- val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
- SSCG_PLL_FEEDBACK_DIV_F2_MASK |
- SSCG_PLL_FEEDBACK_DIV_F1_MASK |
- SSCG_PLL_REF_DIVR2_MASK);
- val |= SSCG_PLL_OUTPUT_DIV_VAL(0);
- val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(11);
- val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
- val |= SSCG_PLL_REF_DIVR2_VAL(29);
- writel(val, pll_cfg_reg2);
- break;
- case MHZ(600):
- val = readl(pll_cfg_reg2);
- val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
- SSCG_PLL_FEEDBACK_DIV_F2_MASK |
- SSCG_PLL_FEEDBACK_DIV_F1_MASK |
- SSCG_PLL_REF_DIVR2_MASK);
- val |= SSCG_PLL_OUTPUT_DIV_VAL(1);
- val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(17);
- val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
- val |= SSCG_PLL_REF_DIVR2_VAL(29);
- writel(val, pll_cfg_reg2);
- break;
- case MHZ(400):
- val = readl(pll_cfg_reg2);
- val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
- SSCG_PLL_FEEDBACK_DIV_F2_MASK |
- SSCG_PLL_FEEDBACK_DIV_F1_MASK |
- SSCG_PLL_REF_DIVR2_MASK);
- val |= SSCG_PLL_OUTPUT_DIV_VAL(1);
- val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(11);
- val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
- val |= SSCG_PLL_REF_DIVR2_VAL(29);
- writel(val, pll_cfg_reg2);
- break;
- case MHZ(167):
- val = readl(pll_cfg_reg2);
- val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
- SSCG_PLL_FEEDBACK_DIV_F2_MASK |
- SSCG_PLL_FEEDBACK_DIV_F1_MASK |
- SSCG_PLL_REF_DIVR2_MASK);
- val |= SSCG_PLL_OUTPUT_DIV_VAL(3);
- val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(8);
- val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(45);
- val |= SSCG_PLL_REF_DIVR2_VAL(30);
- writel(val, pll_cfg_reg2);
- break;
- default:
- break;
- }
-
- /* Clear power down bit */
- clrbits_le32(pll_control_reg, SSCG_PLL_PD_MASK);
- /* Eanble ARM_PLL/SYS_PLL */
- setbits_le32(pll_control_reg, SSCG_PLL_DRAM_PLL_CLKE_MASK);
-
- /* Clear bypass */
- clrbits_le32(pll_control_reg, SSCG_PLL_BYPASS1_MASK);
- __udelay(100);
- clrbits_le32(pll_control_reg, SSCG_PLL_BYPASS2_MASK);
- /* Wait lock */
- while (!(readl(pll_control_reg) & SSCG_PLL_LOCK_MASK))
- ;
-}
-
-int frac_pll_init(u32 pll, enum frac_pll_out_val val)
-{
- void __iomem *pll_cfg0, __iomem *pll_cfg1;
- u32 val_cfg0, val_cfg1;
- int ret;
-
- switch (pll) {
- case ANATOP_ARM_PLL:
- pll_cfg0 = &ana_pll->arm_pll_cfg0;
- pll_cfg1 = &ana_pll->arm_pll_cfg1;
-
- if (val == FRAC_PLL_OUT_1000M)
- val_cfg1 = FRAC_PLL_INT_DIV_CTL_VAL(49);
- else
- val_cfg1 = FRAC_PLL_INT_DIV_CTL_VAL(79);
- val_cfg0 = FRAC_PLL_CLKE_MASK | FRAC_PLL_REFCLK_SEL_OSC_25M |
- FRAC_PLL_LOCK_SEL_MASK | FRAC_PLL_NEWDIV_VAL_MASK |
- FRAC_PLL_REFCLK_DIV_VAL(4) |
- FRAC_PLL_OUTPUT_DIV_VAL(0);
- break;
- default:
- return -EINVAL;
- }
-
- /* bypass the clock */
- setbits_le32(pll_cfg0, FRAC_PLL_BYPASS_MASK);
- /* Set the value */
- writel(val_cfg1, pll_cfg1);
- writel(val_cfg0 | FRAC_PLL_BYPASS_MASK, pll_cfg0);
- val_cfg0 = readl(pll_cfg0);
- /* unbypass the clock */
- clrbits_le32(pll_cfg0, FRAC_PLL_BYPASS_MASK);
- ret = readl_poll_timeout(pll_cfg0, val_cfg0,
- val_cfg0 & FRAC_PLL_LOCK_MASK, 1);
- if (ret)
- printf("%s timeout\n", __func__);
- clrbits_le32(pll_cfg0, FRAC_PLL_NEWDIV_VAL_MASK);
-
- return 0;
-}
-
-int sscg_pll_init(u32 pll)
-{
- void __iomem *pll_cfg0, __iomem *pll_cfg1, __iomem *pll_cfg2;
- u32 val_cfg0, val_cfg1, val_cfg2, val;
- u32 bypass1_mask = 0x20, bypass2_mask = 0x10;
- int ret;
-
- switch (pll) {
- case ANATOP_SYSTEM_PLL1:
- pll_cfg0 = &ana_pll->sys_pll1_cfg0;
- pll_cfg1 = &ana_pll->sys_pll1_cfg1;
- pll_cfg2 = &ana_pll->sys_pll1_cfg2;
- /* 800MHz */
- val_cfg2 = SSCG_PLL_FEEDBACK_DIV_F1_VAL(3) |
- SSCG_PLL_FEEDBACK_DIV_F2_VAL(3);
- val_cfg1 = 0;
- val_cfg0 = SSCG_PLL_CLKE_MASK | SSCG_PLL_DIV2_CLKE_MASK |
- SSCG_PLL_DIV3_CLKE_MASK | SSCG_PLL_DIV4_CLKE_MASK |
- SSCG_PLL_DIV5_CLKE_MASK | SSCG_PLL_DIV6_CLKE_MASK |
- SSCG_PLL_DIV8_CLKE_MASK | SSCG_PLL_DIV10_CLKE_MASK |
- SSCG_PLL_DIV20_CLKE_MASK | SSCG_PLL_LOCK_SEL_MASK |
- SSCG_PLL_REFCLK_SEL_OSC_25M;
- break;
- case ANATOP_SYSTEM_PLL2:
- pll_cfg0 = &ana_pll->sys_pll2_cfg0;
- pll_cfg1 = &ana_pll->sys_pll2_cfg1;
- pll_cfg2 = &ana_pll->sys_pll2_cfg2;
- /* 1000MHz */
- val_cfg2 = SSCG_PLL_FEEDBACK_DIV_F1_VAL(3) |
- SSCG_PLL_FEEDBACK_DIV_F2_VAL(4);
- val_cfg1 = 0;
- val_cfg0 = SSCG_PLL_CLKE_MASK | SSCG_PLL_DIV2_CLKE_MASK |
- SSCG_PLL_DIV3_CLKE_MASK | SSCG_PLL_DIV4_CLKE_MASK |
- SSCG_PLL_DIV5_CLKE_MASK | SSCG_PLL_DIV6_CLKE_MASK |
- SSCG_PLL_DIV8_CLKE_MASK | SSCG_PLL_DIV10_CLKE_MASK |
- SSCG_PLL_DIV20_CLKE_MASK | SSCG_PLL_LOCK_SEL_MASK |
- SSCG_PLL_REFCLK_SEL_OSC_25M;
- break;
- case ANATOP_SYSTEM_PLL3:
- pll_cfg0 = &ana_pll->sys_pll3_cfg0;
- pll_cfg1 = &ana_pll->sys_pll3_cfg1;
- pll_cfg2 = &ana_pll->sys_pll3_cfg2;
- /* 800MHz */
- val_cfg2 = SSCG_PLL_FEEDBACK_DIV_F1_VAL(3) |
- SSCG_PLL_FEEDBACK_DIV_F2_VAL(3);
- val_cfg1 = 0;
- val_cfg0 = SSCG_PLL_PLL3_CLKE_MASK | SSCG_PLL_LOCK_SEL_MASK |
- SSCG_PLL_REFCLK_SEL_OSC_25M;
- break;
- default:
- return -EINVAL;
- }
-
- /*bypass*/
- setbits_le32(pll_cfg0, bypass1_mask | bypass2_mask);
- /* set value */
- writel(val_cfg2, pll_cfg2);
- writel(val_cfg1, pll_cfg1);
- /*unbypass1 and wait 70us */
- writel(val_cfg0 | bypass2_mask, pll_cfg1);
-
- __udelay(70);
-
- /* unbypass2 and wait lock */
- writel(val_cfg0, pll_cfg1);
- ret = readl_poll_timeout(pll_cfg0, val, val & SSCG_PLL_LOCK_MASK, 1);
- if (ret)
- printf("%s timeout\n", __func__);
-
- return ret;
-}
-
-int clock_init(void)
-{
- u32 grade;
-
- clock_set_target_val(ARM_A53_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(0));
-
- /*
- * 8MQ only supports two grades: consumer and industrial.
- * We set ARM clock to 1Ghz for consumer, 800Mhz for industrial
- */
- grade = get_cpu_temp_grade(NULL, NULL);
- if (!grade) {
- frac_pll_init(ANATOP_ARM_PLL, FRAC_PLL_OUT_1000M);
- clock_set_target_val(ARM_A53_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(1) |
- CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1));
- } else {
- frac_pll_init(ANATOP_ARM_PLL, FRAC_PLL_OUT_1600M);
- clock_set_target_val(ARM_A53_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(1) |
- CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2));
- }
- /*
- * According to ANAMIX SPEC
- * sys pll1 fixed at 800MHz
- * sys pll2 fixed at 1GHz
- * Here we only enable the outputs.
- */
- setbits_le32(&ana_pll->sys_pll1_cfg0, SSCG_PLL_CLKE_MASK |
- SSCG_PLL_DIV2_CLKE_MASK | SSCG_PLL_DIV3_CLKE_MASK |
- SSCG_PLL_DIV4_CLKE_MASK | SSCG_PLL_DIV5_CLKE_MASK |
- SSCG_PLL_DIV6_CLKE_MASK | SSCG_PLL_DIV8_CLKE_MASK |
- SSCG_PLL_DIV10_CLKE_MASK | SSCG_PLL_DIV20_CLKE_MASK);
-
- setbits_le32(&ana_pll->sys_pll2_cfg0, SSCG_PLL_CLKE_MASK |
- SSCG_PLL_DIV2_CLKE_MASK | SSCG_PLL_DIV3_CLKE_MASK |
- SSCG_PLL_DIV4_CLKE_MASK | SSCG_PLL_DIV5_CLKE_MASK |
- SSCG_PLL_DIV6_CLKE_MASK | SSCG_PLL_DIV8_CLKE_MASK |
- SSCG_PLL_DIV10_CLKE_MASK | SSCG_PLL_DIV20_CLKE_MASK);
-
- clock_set_target_val(NAND_USDHC_BUS_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(1));
-
- init_wdog_clk();
- clock_enable(CCGR_TSENSOR, 1);
-
- return 0;
-}
-#endif
-
-/*
- * Dump some clockes.
- */
-#ifndef CONFIG_SPL_BUILD
-int do_imx8m_showclocks(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[])
-{
- u32 freq;
-
- freq = decode_frac_pll(ARM_PLL_CLK);
- printf("ARM_PLL %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL1_800M_CLK);
- printf("SYS_PLL1_800 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL1_400M_CLK);
- printf("SYS_PLL1_400 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL1_266M_CLK);
- printf("SYS_PLL1_266 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL1_200M_CLK);
- printf("SYS_PLL1_200 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL1_160M_CLK);
- printf("SYS_PLL1_160 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL1_133M_CLK);
- printf("SYS_PLL1_133 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL1_100M_CLK);
- printf("SYS_PLL1_100 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL1_80M_CLK);
- printf("SYS_PLL1_80 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL1_40M_CLK);
- printf("SYS_PLL1_40 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL2_1000M_CLK);
- printf("SYS_PLL2_1000 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL2_500M_CLK);
- printf("SYS_PLL2_500 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL2_333M_CLK);
- printf("SYS_PLL2_333 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL2_250M_CLK);
- printf("SYS_PLL2_250 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL2_200M_CLK);
- printf("SYS_PLL2_200 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL2_166M_CLK);
- printf("SYS_PLL2_166 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL2_125M_CLK);
- printf("SYS_PLL2_125 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL2_100M_CLK);
- printf("SYS_PLL2_100 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL2_50M_CLK);
- printf("SYS_PLL2_50 %8d MHz\n", freq / 1000000);
- freq = decode_sscg_pll(SYSTEM_PLL3_CLK);
- printf("SYS_PLL3 %8d MHz\n", freq / 1000000);
- freq = mxc_get_clock(UART1_CLK_ROOT);
- printf("UART1 %8d MHz\n", freq / 1000000);
- freq = mxc_get_clock(USDHC1_CLK_ROOT);
- printf("USDHC1 %8d MHz\n", freq / 1000000);
- freq = mxc_get_clock(QSPI_CLK_ROOT);
- printf("QSPI %8d MHz\n", freq / 1000000);
- return 0;
-}
-
-U_BOOT_CMD(
- clocks, CONFIG_SYS_MAXARGS, 1, do_imx8m_showclocks,
- "display clocks",
- ""
-);
-#endif
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <clk.h>
+#include <clk-uclass.h>
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <div64.h>
+#include <errno.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct anamix_pll *ana_pll = (struct anamix_pll *)ANATOP_BASE_ADDR;
+
+void enable_ocotp_clk(unsigned char enable)
+{
+ struct clk *clkp;
+ int ret;
+
+ ret = clk_get_by_id(IMX8MM_CLK_OCOTP_ROOT, &clkp);
+ if (ret) {
+ printf("%s: err: %d\n", __func__, ret);
+ return;
+ }
+
+ enable ? clk_enable(clkp) : clk_disable(clkp);
+}
+
+int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
+{
+ struct clk *clkp;
+ int ret;
+
+ ret = clk_get_by_id(IMX8MM_CLK_I2C1_ROOT + i2c_num, &clkp);
+ if (ret) {
+ printf("%s: err: %d\n", __func__, ret);
+ return ret;
+ }
+
+ return enable ? clk_enable(clkp) : clk_disable(clkp);
+}
+
+#ifdef CONFIG_SPL_BUILD
+static struct imx_int_pll_rate_table imx8mm_fracpll_tbl[] = {
+ PLL_1443X_RATE(800000000U, 300, 9, 0, 0),
+ PLL_1443X_RATE(750000000U, 250, 8, 0, 0),
+ PLL_1443X_RATE(650000000U, 325, 3, 2, 0),
+ PLL_1443X_RATE(600000000U, 300, 3, 2, 0),
+ PLL_1443X_RATE(594000000U, 99, 1, 2, 0),
+ PLL_1443X_RATE(400000000U, 300, 9, 1, 0),
+ PLL_1443X_RATE(266666667U, 400, 9, 2, 0),
+ PLL_1443X_RATE(167000000U, 334, 3, 4, 0),
+ PLL_1443X_RATE(100000000U, 300, 9, 3, 0),
+};
+
+int fracpll_configure(enum pll_clocks pll, u32 freq)
+{
+ int i;
+ u32 tmp, div_val;
+ void *pll_base;
+ struct imx_int_pll_rate_table *rate;
+
+ for (i = 0; i < ARRAY_SIZE(imx8mm_fracpll_tbl); i++) {
+ if (freq == imx8mm_fracpll_tbl[i].rate)
+ break;
+ }
+
+ if (i == ARRAY_SIZE(imx8mm_fracpll_tbl)) {
+ printf("No matched freq table %u\n", freq);
+ return -EINVAL;
+ }
+
+ rate = &imx8mm_fracpll_tbl[i];
+
+ switch (pll) {
+ case ANATOP_DRAM_PLL:
+ setbits_le32(GPC_BASE_ADDR + 0xEC, 1 << 7);
+ setbits_le32(GPC_BASE_ADDR + 0xF8, 1 << 5);
+ writel(SRC_DDR1_ENABLE_MASK, SRC_BASE_ADDR + 0x1004);
+
+ pll_base = &ana_pll->dram_pll_gnrl_ctl;
+ break;
+ case ANATOP_VIDEO_PLL:
+ pll_base = &ana_pll->video_pll1_gnrl_ctl;
+ break;
+ default:
+ return 0;
+ }
+ /* Bypass clock and set lock to pll output lock */
+ tmp = readl(pll_base);
+ tmp |= BYPASS_MASK;
+ writel(tmp, pll_base);
+
+ /* Enable RST */
+ tmp &= ~RST_MASK;
+ writel(tmp, pll_base);
+
+ div_val = (rate->mdiv << MDIV_SHIFT) | (rate->pdiv << PDIV_SHIFT) |
+ (rate->sdiv << SDIV_SHIFT);
+ writel(div_val, pll_base + 4);
+ writel(rate->kdiv << KDIV_SHIFT, pll_base + 8);
+
+ __udelay(100);
+
+ /* Disable RST */
+ tmp |= RST_MASK;
+ writel(tmp, pll_base);
+
+ /* Wait Lock*/
+ while (!(readl(pll_base) & LOCK_STATUS))
+ ;
+
+ /* Bypass */
+ tmp &= ~BYPASS_MASK;
+ writel(tmp, pll_base);
+
+ return 0;
+}
+
+void dram_pll_init(ulong pll_val)
+{
+ fracpll_configure(ANATOP_DRAM_PLL, pll_val);
+}
+
+static struct dram_bypass_clk_setting imx8mm_dram_bypass_tbl[] = {
+ DRAM_BYPASS_ROOT_CONFIG(MHZ(100), 2, CLK_ROOT_PRE_DIV1, 2,
+ CLK_ROOT_PRE_DIV2),
+ DRAM_BYPASS_ROOT_CONFIG(MHZ(250), 3, CLK_ROOT_PRE_DIV2, 2,
+ CLK_ROOT_PRE_DIV2),
+ DRAM_BYPASS_ROOT_CONFIG(MHZ(400), 1, CLK_ROOT_PRE_DIV2, 3,
+ CLK_ROOT_PRE_DIV2),
+};
+
+void dram_enable_bypass(ulong clk_val)
+{
+ int i;
+ struct dram_bypass_clk_setting *config;
+
+ for (i = 0; i < ARRAY_SIZE(imx8mm_dram_bypass_tbl); i++) {
+ if (clk_val == imx8mm_dram_bypass_tbl[i].clk)
+ break;
+ }
+
+ if (i == ARRAY_SIZE(imx8mm_dram_bypass_tbl)) {
+ printf("No matched freq table %lu\n", clk_val);
+ return;
+ }
+
+ config = &imx8mm_dram_bypass_tbl[i];
+
+ clock_set_target_val(DRAM_ALT_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(config->alt_root_sel) |
+ CLK_ROOT_PRE_DIV(config->alt_pre_div));
+ clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(config->apb_root_sel) |
+ CLK_ROOT_PRE_DIV(config->apb_pre_div));
+ clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(1));
+}
+
+void dram_disable_bypass(void)
+{
+ clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(0));
+ clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(4) |
+ CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV5));
+}
+#endif
+
+void init_uart_clk(u32 index)
+{
+ /*
+ * set uart clock root
+ * 24M OSC
+ */
+ switch (index) {
+ case 0:
+ clock_enable(CCGR_UART1, 0);
+ clock_set_target_val(UART1_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(0));
+ clock_enable(CCGR_UART1, 1);
+ return;
+ case 1:
+ clock_enable(CCGR_UART2, 0);
+ clock_set_target_val(UART2_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(0));
+ clock_enable(CCGR_UART2, 1);
+ return;
+ case 2:
+ clock_enable(CCGR_UART3, 0);
+ clock_set_target_val(UART3_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(0));
+ clock_enable(CCGR_UART3, 1);
+ return;
+ case 3:
+ clock_enable(CCGR_UART4, 0);
+ clock_set_target_val(UART4_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(0));
+ clock_enable(CCGR_UART4, 1);
+ return;
+ default:
+ printf("Invalid uart index\n");
+ return;
+ }
+}
+
+void init_wdog_clk(void)
+{
+ clock_enable(CCGR_WDOG1, 0);
+ clock_enable(CCGR_WDOG2, 0);
+ clock_enable(CCGR_WDOG3, 0);
+ clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(0));
+ clock_enable(CCGR_WDOG1, 1);
+ clock_enable(CCGR_WDOG2, 1);
+ clock_enable(CCGR_WDOG3, 1);
+}
+
+int clock_init(void)
+{
+ u32 val_cfg0;
+
+ /*
+ * The gate is not exported to clk tree, so configure them here.
+ * According to ANAMIX SPEC
+ * sys pll1 fixed at 800MHz
+ * sys pll2 fixed at 1GHz
+ * Here we only enable the outputs.
+ */
+ val_cfg0 = readl(&ana_pll->sys_pll1_gnrl_ctl);
+ val_cfg0 |= INTPLL_CLKE_MASK | INTPLL_DIV2_CLKE_MASK |
+ INTPLL_DIV3_CLKE_MASK | INTPLL_DIV4_CLKE_MASK |
+ INTPLL_DIV5_CLKE_MASK | INTPLL_DIV6_CLKE_MASK |
+ INTPLL_DIV8_CLKE_MASK | INTPLL_DIV10_CLKE_MASK |
+ INTPLL_DIV20_CLKE_MASK;
+ writel(val_cfg0, &ana_pll->sys_pll1_gnrl_ctl);
+
+ val_cfg0 = readl(&ana_pll->sys_pll2_gnrl_ctl);
+ val_cfg0 |= INTPLL_CLKE_MASK | INTPLL_DIV2_CLKE_MASK |
+ INTPLL_DIV3_CLKE_MASK | INTPLL_DIV4_CLKE_MASK |
+ INTPLL_DIV5_CLKE_MASK | INTPLL_DIV6_CLKE_MASK |
+ INTPLL_DIV8_CLKE_MASK | INTPLL_DIV10_CLKE_MASK |
+ INTPLL_DIV20_CLKE_MASK;
+ writel(val_cfg0, &ana_pll->sys_pll2_gnrl_ctl);
+
+ /* config GIC to sys_pll2_100m */
+ clock_enable(CCGR_GIC, 0);
+ clock_set_target_val(GIC_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(3));
+ clock_enable(CCGR_GIC, 1);
+
+ clock_set_target_val(NAND_USDHC_BUS_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(1));
+
+ clock_enable(CCGR_DDR1, 0);
+ clock_set_target_val(DRAM_ALT_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(1));
+ clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(1));
+ clock_enable(CCGR_DDR1, 1);
+
+ init_wdog_clk();
+
+ clock_enable(CCGR_TEMP_SENSOR, 1);
+
+ clock_enable(CCGR_SEC_DEBUG, 1);
+
+ return 0;
+};
+
+u32 imx_get_uartclk(void)
+{
+ return 24000000U;
+}
+
+u32 mxc_get_clock(enum mxc_clock clk)
+{
+ struct clk *clkp;
+ int ret;
+
+ switch (clk) {
+ case MXC_IPG_CLK:
+ ret = clk_get_by_id(IMX8MM_CLK_IPG_ROOT, &clkp);
+ if (ret)
+ return 0;
+ return clk_get_rate(clkp);
+ case MXC_ARM_CLK:
+ ret = clk_get_by_id(IMX8MM_CLK_A53_DIV, &clkp);
+ if (ret)
+ return 0;
+ return clk_get_rate(clkp);
+ default:
+ printf("%s: %d not supported\n", __func__, clk);
+ }
+
+ return 0;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017 NXP
+ *
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <errno.h>
+#include <linux/iopoll.h>
+
+static struct anamix_pll *ana_pll = (struct anamix_pll *)ANATOP_BASE_ADDR;
+
+static u32 decode_frac_pll(enum clk_root_src frac_pll)
+{
+ u32 pll_cfg0, pll_cfg1, pllout;
+ u32 pll_refclk_sel, pll_refclk;
+ u32 divr_val, divq_val, divf_val, divff, divfi;
+ u32 pllout_div_shift, pllout_div_mask, pllout_div;
+
+ switch (frac_pll) {
+ case ARM_PLL_CLK:
+ pll_cfg0 = readl(&ana_pll->arm_pll_cfg0);
+ pll_cfg1 = readl(&ana_pll->arm_pll_cfg1);
+ pllout_div_shift = HW_FRAC_ARM_PLL_DIV_SHIFT;
+ pllout_div_mask = HW_FRAC_ARM_PLL_DIV_MASK;
+ break;
+ default:
+ printf("Frac PLL %d not supporte\n", frac_pll);
+ return 0;
+ }
+
+ pllout_div = readl(&ana_pll->frac_pllout_div_cfg);
+ pllout_div = (pllout_div & pllout_div_mask) >> pllout_div_shift;
+
+ /* Power down */
+ if (pll_cfg0 & FRAC_PLL_PD_MASK)
+ return 0;
+
+ /* output not enabled */
+ if ((pll_cfg0 & FRAC_PLL_CLKE_MASK) == 0)
+ return 0;
+
+ pll_refclk_sel = pll_cfg0 & FRAC_PLL_REFCLK_SEL_MASK;
+
+ if (pll_refclk_sel == FRAC_PLL_REFCLK_SEL_OSC_25M)
+ pll_refclk = 25000000u;
+ else if (pll_refclk_sel == FRAC_PLL_REFCLK_SEL_OSC_27M)
+ pll_refclk = 27000000u;
+ else if (pll_refclk_sel == FRAC_PLL_REFCLK_SEL_HDMI_PHY_27M)
+ pll_refclk = 27000000u;
+ else
+ pll_refclk = 0;
+
+ if (pll_cfg0 & FRAC_PLL_BYPASS_MASK)
+ return pll_refclk;
+
+ divr_val = (pll_cfg0 & FRAC_PLL_REFCLK_DIV_VAL_MASK) >>
+ FRAC_PLL_REFCLK_DIV_VAL_SHIFT;
+ divq_val = pll_cfg0 & FRAC_PLL_OUTPUT_DIV_VAL_MASK;
+
+ divff = (pll_cfg1 & FRAC_PLL_FRAC_DIV_CTL_MASK) >>
+ FRAC_PLL_FRAC_DIV_CTL_SHIFT;
+ divfi = pll_cfg1 & FRAC_PLL_INT_DIV_CTL_MASK;
+
+ divf_val = 1 + divfi + divff / (1 << 24);
+
+ pllout = pll_refclk / (divr_val + 1) * 8 * divf_val /
+ ((divq_val + 1) * 2);
+
+ return pllout / (pllout_div + 1);
+}
+
+static u32 decode_sscg_pll(enum clk_root_src sscg_pll)
+{
+ u32 pll_cfg0, pll_cfg1, pll_cfg2;
+ u32 pll_refclk_sel, pll_refclk;
+ u32 divr1, divr2, divf1, divf2, divq, div;
+ u32 sse;
+ u32 pll_clke;
+ u32 pllout_div_shift, pllout_div_mask, pllout_div;
+ u32 pllout;
+
+ switch (sscg_pll) {
+ case SYSTEM_PLL1_800M_CLK:
+ case SYSTEM_PLL1_400M_CLK:
+ case SYSTEM_PLL1_266M_CLK:
+ case SYSTEM_PLL1_200M_CLK:
+ case SYSTEM_PLL1_160M_CLK:
+ case SYSTEM_PLL1_133M_CLK:
+ case SYSTEM_PLL1_100M_CLK:
+ case SYSTEM_PLL1_80M_CLK:
+ case SYSTEM_PLL1_40M_CLK:
+ pll_cfg0 = readl(&ana_pll->sys_pll1_cfg0);
+ pll_cfg1 = readl(&ana_pll->sys_pll1_cfg1);
+ pll_cfg2 = readl(&ana_pll->sys_pll1_cfg2);
+ pllout_div_shift = HW_SSCG_SYSTEM_PLL1_DIV_SHIFT;
+ pllout_div_mask = HW_SSCG_SYSTEM_PLL1_DIV_MASK;
+ break;
+ case SYSTEM_PLL2_1000M_CLK:
+ case SYSTEM_PLL2_500M_CLK:
+ case SYSTEM_PLL2_333M_CLK:
+ case SYSTEM_PLL2_250M_CLK:
+ case SYSTEM_PLL2_200M_CLK:
+ case SYSTEM_PLL2_166M_CLK:
+ case SYSTEM_PLL2_125M_CLK:
+ case SYSTEM_PLL2_100M_CLK:
+ case SYSTEM_PLL2_50M_CLK:
+ pll_cfg0 = readl(&ana_pll->sys_pll2_cfg0);
+ pll_cfg1 = readl(&ana_pll->sys_pll2_cfg1);
+ pll_cfg2 = readl(&ana_pll->sys_pll2_cfg2);
+ pllout_div_shift = HW_SSCG_SYSTEM_PLL2_DIV_SHIFT;
+ pllout_div_mask = HW_SSCG_SYSTEM_PLL2_DIV_MASK;
+ break;
+ case SYSTEM_PLL3_CLK:
+ pll_cfg0 = readl(&ana_pll->sys_pll3_cfg0);
+ pll_cfg1 = readl(&ana_pll->sys_pll3_cfg1);
+ pll_cfg2 = readl(&ana_pll->sys_pll3_cfg2);
+ pllout_div_shift = HW_SSCG_SYSTEM_PLL3_DIV_SHIFT;
+ pllout_div_mask = HW_SSCG_SYSTEM_PLL3_DIV_MASK;
+ break;
+ case DRAM_PLL1_CLK:
+ pll_cfg0 = readl(&ana_pll->dram_pll_cfg0);
+ pll_cfg1 = readl(&ana_pll->dram_pll_cfg1);
+ pll_cfg2 = readl(&ana_pll->dram_pll_cfg2);
+ pllout_div_shift = HW_SSCG_DRAM_PLL_DIV_SHIFT;
+ pllout_div_mask = HW_SSCG_DRAM_PLL_DIV_MASK;
+ break;
+ default:
+ printf("sscg pll %d not supporte\n", sscg_pll);
+ return 0;
+ }
+
+ switch (sscg_pll) {
+ case DRAM_PLL1_CLK:
+ pll_clke = SSCG_PLL_DRAM_PLL_CLKE_MASK;
+ div = 1;
+ break;
+ case SYSTEM_PLL3_CLK:
+ pll_clke = SSCG_PLL_PLL3_CLKE_MASK;
+ div = 1;
+ break;
+ case SYSTEM_PLL2_1000M_CLK:
+ case SYSTEM_PLL1_800M_CLK:
+ pll_clke = SSCG_PLL_CLKE_MASK;
+ div = 1;
+ break;
+ case SYSTEM_PLL2_500M_CLK:
+ case SYSTEM_PLL1_400M_CLK:
+ pll_clke = SSCG_PLL_DIV2_CLKE_MASK;
+ div = 2;
+ break;
+ case SYSTEM_PLL2_333M_CLK:
+ case SYSTEM_PLL1_266M_CLK:
+ pll_clke = SSCG_PLL_DIV3_CLKE_MASK;
+ div = 3;
+ break;
+ case SYSTEM_PLL2_250M_CLK:
+ case SYSTEM_PLL1_200M_CLK:
+ pll_clke = SSCG_PLL_DIV4_CLKE_MASK;
+ div = 4;
+ break;
+ case SYSTEM_PLL2_200M_CLK:
+ case SYSTEM_PLL1_160M_CLK:
+ pll_clke = SSCG_PLL_DIV5_CLKE_MASK;
+ div = 5;
+ break;
+ case SYSTEM_PLL2_166M_CLK:
+ case SYSTEM_PLL1_133M_CLK:
+ pll_clke = SSCG_PLL_DIV6_CLKE_MASK;
+ div = 6;
+ break;
+ case SYSTEM_PLL2_125M_CLK:
+ case SYSTEM_PLL1_100M_CLK:
+ pll_clke = SSCG_PLL_DIV8_CLKE_MASK;
+ div = 8;
+ break;
+ case SYSTEM_PLL2_100M_CLK:
+ case SYSTEM_PLL1_80M_CLK:
+ pll_clke = SSCG_PLL_DIV10_CLKE_MASK;
+ div = 10;
+ break;
+ case SYSTEM_PLL2_50M_CLK:
+ case SYSTEM_PLL1_40M_CLK:
+ pll_clke = SSCG_PLL_DIV20_CLKE_MASK;
+ div = 20;
+ break;
+ default:
+ printf("sscg pll %d not supporte\n", sscg_pll);
+ return 0;
+ }
+
+ /* Power down */
+ if (pll_cfg0 & SSCG_PLL_PD_MASK)
+ return 0;
+
+ /* output not enabled */
+ if ((pll_cfg0 & pll_clke) == 0)
+ return 0;
+
+ pllout_div = readl(&ana_pll->sscg_pllout_div_cfg);
+ pllout_div = (pllout_div & pllout_div_mask) >> pllout_div_shift;
+
+ pll_refclk_sel = pll_cfg0 & SSCG_PLL_REFCLK_SEL_MASK;
+
+ if (pll_refclk_sel == SSCG_PLL_REFCLK_SEL_OSC_25M)
+ pll_refclk = 25000000u;
+ else if (pll_refclk_sel == SSCG_PLL_REFCLK_SEL_OSC_27M)
+ pll_refclk = 27000000u;
+ else if (pll_refclk_sel == SSCG_PLL_REFCLK_SEL_HDMI_PHY_27M)
+ pll_refclk = 27000000u;
+ else
+ pll_refclk = 0;
+
+ /* We assume bypass1/2 are the same value */
+ if ((pll_cfg0 & SSCG_PLL_BYPASS1_MASK) ||
+ (pll_cfg0 & SSCG_PLL_BYPASS2_MASK))
+ return pll_refclk;
+
+ divr1 = (pll_cfg2 & SSCG_PLL_REF_DIVR1_MASK) >>
+ SSCG_PLL_REF_DIVR1_SHIFT;
+ divr2 = (pll_cfg2 & SSCG_PLL_REF_DIVR2_MASK) >>
+ SSCG_PLL_REF_DIVR2_SHIFT;
+ divf1 = (pll_cfg2 & SSCG_PLL_FEEDBACK_DIV_F1_MASK) >>
+ SSCG_PLL_FEEDBACK_DIV_F1_SHIFT;
+ divf2 = (pll_cfg2 & SSCG_PLL_FEEDBACK_DIV_F2_MASK) >>
+ SSCG_PLL_FEEDBACK_DIV_F2_SHIFT;
+ divq = (pll_cfg2 & SSCG_PLL_OUTPUT_DIV_VAL_MASK) >>
+ SSCG_PLL_OUTPUT_DIV_VAL_SHIFT;
+ sse = pll_cfg1 & SSCG_PLL_SSE_MASK;
+
+ if (sse)
+ sse = 8;
+ else
+ sse = 2;
+
+ pllout = pll_refclk / (divr1 + 1) * sse * (divf1 + 1) /
+ (divr2 + 1) * (divf2 + 1) / (divq + 1);
+
+ return pllout / (pllout_div + 1) / div;
+}
+
+static u32 get_root_src_clk(enum clk_root_src root_src)
+{
+ switch (root_src) {
+ case OSC_25M_CLK:
+ return 25000000;
+ case OSC_27M_CLK:
+ return 27000000;
+ case OSC_32K_CLK:
+ return 32768;
+ case ARM_PLL_CLK:
+ return decode_frac_pll(root_src);
+ case SYSTEM_PLL1_800M_CLK:
+ case SYSTEM_PLL1_400M_CLK:
+ case SYSTEM_PLL1_266M_CLK:
+ case SYSTEM_PLL1_200M_CLK:
+ case SYSTEM_PLL1_160M_CLK:
+ case SYSTEM_PLL1_133M_CLK:
+ case SYSTEM_PLL1_100M_CLK:
+ case SYSTEM_PLL1_80M_CLK:
+ case SYSTEM_PLL1_40M_CLK:
+ case SYSTEM_PLL2_1000M_CLK:
+ case SYSTEM_PLL2_500M_CLK:
+ case SYSTEM_PLL2_333M_CLK:
+ case SYSTEM_PLL2_250M_CLK:
+ case SYSTEM_PLL2_200M_CLK:
+ case SYSTEM_PLL2_166M_CLK:
+ case SYSTEM_PLL2_125M_CLK:
+ case SYSTEM_PLL2_100M_CLK:
+ case SYSTEM_PLL2_50M_CLK:
+ case SYSTEM_PLL3_CLK:
+ return decode_sscg_pll(root_src);
+ default:
+ return 0;
+ }
+
+ return 0;
+}
+
+static u32 get_root_clk(enum clk_root_index clock_id)
+{
+ enum clk_root_src root_src;
+ u32 post_podf, pre_podf, root_src_clk;
+
+ if (clock_root_enabled(clock_id) <= 0)
+ return 0;
+
+ if (clock_get_prediv(clock_id, &pre_podf) < 0)
+ return 0;
+
+ if (clock_get_postdiv(clock_id, &post_podf) < 0)
+ return 0;
+
+ if (clock_get_src(clock_id, &root_src) < 0)
+ return 0;
+
+ root_src_clk = get_root_src_clk(root_src);
+
+ return root_src_clk / (post_podf + 1) / (pre_podf + 1);
+}
+
+#ifdef CONFIG_MXC_OCOTP
+void enable_ocotp_clk(unsigned char enable)
+{
+ clock_enable(CCGR_OCOTP, !!enable);
+}
+#endif
+
+int enable_i2c_clk(unsigned char enable, unsigned int i2c_num)
+{
+ /* 0 - 3 is valid i2c num */
+ if (i2c_num > 3)
+ return -EINVAL;
+
+ clock_enable(CCGR_I2C1 + i2c_num, !!enable);
+
+ return 0;
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+ u32 val;
+
+ if (clk == MXC_ARM_CLK)
+ return get_root_clk(ARM_A53_CLK_ROOT);
+
+ if (clk == MXC_IPG_CLK) {
+ clock_get_target_val(IPG_CLK_ROOT, &val);
+ val = val & 0x3;
+ return get_root_clk(AHB_CLK_ROOT) / (val + 1);
+ }
+
+ return get_root_clk(clk);
+}
+
+u32 imx_get_uartclk(void)
+{
+ return mxc_get_clock(UART1_CLK_ROOT);
+}
+
+void mxs_set_lcdclk(u32 base_addr, u32 freq)
+{
+ /*
+ * LCDIF_PIXEL_CLK: select 800MHz root clock,
+ * select pre divider 8, output is 100 MHz
+ */
+ clock_set_target_val(LCDIF_PIXEL_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(4) |
+ CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV8));
+}
+
+void init_wdog_clk(void)
+{
+ clock_enable(CCGR_WDOG1, 0);
+ clock_enable(CCGR_WDOG2, 0);
+ clock_enable(CCGR_WDOG3, 0);
+ clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(0));
+ clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(0));
+ clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(0));
+ clock_enable(CCGR_WDOG1, 1);
+ clock_enable(CCGR_WDOG2, 1);
+ clock_enable(CCGR_WDOG3, 1);
+}
+
+void init_usb_clk(void)
+{
+ if (!is_usb_boot()) {
+ clock_enable(CCGR_USB_CTRL1, 0);
+ clock_enable(CCGR_USB_CTRL2, 0);
+ clock_enable(CCGR_USB_PHY1, 0);
+ clock_enable(CCGR_USB_PHY2, 0);
+ /* 500MHz */
+ clock_set_target_val(USB_BUS_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(1));
+ /* 100MHz */
+ clock_set_target_val(USB_CORE_REF_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(1));
+ /* 100MHz */
+ clock_set_target_val(USB_PHY_REF_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(1));
+ clock_enable(CCGR_USB_CTRL1, 1);
+ clock_enable(CCGR_USB_CTRL2, 1);
+ clock_enable(CCGR_USB_PHY1, 1);
+ clock_enable(CCGR_USB_PHY2, 1);
+ }
+}
+
+void init_uart_clk(u32 index)
+{
+ /* Set uart clock root 25M OSC */
+ switch (index) {
+ case 0:
+ clock_enable(CCGR_UART1, 0);
+ clock_set_target_val(UART1_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(0));
+ clock_enable(CCGR_UART1, 1);
+ return;
+ case 1:
+ clock_enable(CCGR_UART2, 0);
+ clock_set_target_val(UART2_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(0));
+ clock_enable(CCGR_UART2, 1);
+ return;
+ case 2:
+ clock_enable(CCGR_UART3, 0);
+ clock_set_target_val(UART3_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(0));
+ clock_enable(CCGR_UART3, 1);
+ return;
+ case 3:
+ clock_enable(CCGR_UART4, 0);
+ clock_set_target_val(UART4_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(0));
+ clock_enable(CCGR_UART4, 1);
+ return;
+ default:
+ printf("Invalid uart index\n");
+ return;
+ }
+}
+
+void init_clk_usdhc(u32 index)
+{
+ /*
+ * set usdhc clock root
+ * sys pll1 400M
+ */
+ switch (index) {
+ case 0:
+ clock_enable(CCGR_USDHC1, 0);
+ clock_set_target_val(USDHC1_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(1) |
+ CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2));
+ clock_enable(CCGR_USDHC1, 1);
+ return;
+ case 1:
+ clock_enable(CCGR_USDHC2, 0);
+ clock_set_target_val(USDHC2_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(1) |
+ CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2));
+ clock_enable(CCGR_USDHC2, 1);
+ return;
+ default:
+ printf("Invalid usdhc index\n");
+ return;
+ }
+}
+
+int set_clk_qspi(void)
+{
+ /*
+ * set qspi root
+ * sys pll1 100M
+ */
+ clock_enable(CCGR_QSPI, 0);
+ clock_set_target_val(QSPI_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(7));
+ clock_enable(CCGR_QSPI, 1);
+
+ return 0;
+}
+
+#ifdef CONFIG_FEC_MXC
+int set_clk_enet(enum enet_freq type)
+{
+ u32 target;
+ u32 enet1_ref;
+
+ switch (type) {
+ case ENET_125MHZ:
+ enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK;
+ break;
+ case ENET_50MHZ:
+ enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK;
+ break;
+ case ENET_25MHZ:
+ enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* disable the clock first */
+ clock_enable(CCGR_ENET1, 0);
+ clock_enable(CCGR_SIM_ENET, 0);
+
+ /* set enet axi clock 266Mhz */
+ target = CLK_ROOT_ON | ENET_AXI_CLK_ROOT_FROM_SYS1_PLL_266M |
+ CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+ CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+ clock_set_target_val(ENET_AXI_CLK_ROOT, target);
+
+ target = CLK_ROOT_ON | enet1_ref |
+ CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+ CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
+ clock_set_target_val(ENET_REF_CLK_ROOT, target);
+
+ target = CLK_ROOT_ON |
+ ENET1_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK |
+ CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
+ CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
+ clock_set_target_val(ENET_TIMER_CLK_ROOT, target);
+
+ /* enable clock */
+ clock_enable(CCGR_SIM_ENET, 1);
+ clock_enable(CCGR_ENET1, 1);
+
+ return 0;
+}
+#endif
+
+u32 imx_get_fecclk(void)
+{
+ return get_root_clk(ENET_AXI_CLK_ROOT);
+}
+
+static struct dram_bypass_clk_setting imx8mq_dram_bypass_tbl[] = {
+ DRAM_BYPASS_ROOT_CONFIG(MHZ(100), 2, CLK_ROOT_PRE_DIV1, 2,
+ CLK_ROOT_PRE_DIV2),
+ DRAM_BYPASS_ROOT_CONFIG(MHZ(250), 3, CLK_ROOT_PRE_DIV2, 2,
+ CLK_ROOT_PRE_DIV2),
+ DRAM_BYPASS_ROOT_CONFIG(MHZ(400), 1, CLK_ROOT_PRE_DIV2, 3,
+ CLK_ROOT_PRE_DIV2),
+};
+
+void dram_enable_bypass(ulong clk_val)
+{
+ int i;
+ struct dram_bypass_clk_setting *config;
+
+ for (i = 0; i < ARRAY_SIZE(imx8mq_dram_bypass_tbl); i++) {
+ if (clk_val == imx8mq_dram_bypass_tbl[i].clk)
+ break;
+ }
+
+ if (i == ARRAY_SIZE(imx8mq_dram_bypass_tbl)) {
+ printf("No matched freq table %lu\n", clk_val);
+ return;
+ }
+
+ config = &imx8mq_dram_bypass_tbl[i];
+
+ clock_set_target_val(DRAM_ALT_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(config->alt_root_sel) |
+ CLK_ROOT_PRE_DIV(config->alt_pre_div));
+ clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(config->apb_root_sel) |
+ CLK_ROOT_PRE_DIV(config->apb_pre_div));
+ clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(1));
+}
+
+void dram_disable_bypass(void)
+{
+ clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(0));
+ clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(4) |
+ CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV5));
+}
+
+#ifdef CONFIG_SPL_BUILD
+void dram_pll_init(ulong pll_val)
+{
+ u32 val;
+ void __iomem *pll_control_reg = &ana_pll->dram_pll_cfg0;
+ void __iomem *pll_cfg_reg2 = &ana_pll->dram_pll_cfg2;
+
+ /* Bypass */
+ setbits_le32(pll_control_reg, SSCG_PLL_BYPASS1_MASK);
+ setbits_le32(pll_control_reg, SSCG_PLL_BYPASS2_MASK);
+
+ switch (pll_val) {
+ case MHZ(800):
+ val = readl(pll_cfg_reg2);
+ val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
+ SSCG_PLL_FEEDBACK_DIV_F2_MASK |
+ SSCG_PLL_FEEDBACK_DIV_F1_MASK |
+ SSCG_PLL_REF_DIVR2_MASK);
+ val |= SSCG_PLL_OUTPUT_DIV_VAL(0);
+ val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(11);
+ val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
+ val |= SSCG_PLL_REF_DIVR2_VAL(29);
+ writel(val, pll_cfg_reg2);
+ break;
+ case MHZ(600):
+ val = readl(pll_cfg_reg2);
+ val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
+ SSCG_PLL_FEEDBACK_DIV_F2_MASK |
+ SSCG_PLL_FEEDBACK_DIV_F1_MASK |
+ SSCG_PLL_REF_DIVR2_MASK);
+ val |= SSCG_PLL_OUTPUT_DIV_VAL(1);
+ val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(17);
+ val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
+ val |= SSCG_PLL_REF_DIVR2_VAL(29);
+ writel(val, pll_cfg_reg2);
+ break;
+ case MHZ(400):
+ val = readl(pll_cfg_reg2);
+ val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
+ SSCG_PLL_FEEDBACK_DIV_F2_MASK |
+ SSCG_PLL_FEEDBACK_DIV_F1_MASK |
+ SSCG_PLL_REF_DIVR2_MASK);
+ val |= SSCG_PLL_OUTPUT_DIV_VAL(1);
+ val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(11);
+ val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
+ val |= SSCG_PLL_REF_DIVR2_VAL(29);
+ writel(val, pll_cfg_reg2);
+ break;
+ case MHZ(167):
+ val = readl(pll_cfg_reg2);
+ val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
+ SSCG_PLL_FEEDBACK_DIV_F2_MASK |
+ SSCG_PLL_FEEDBACK_DIV_F1_MASK |
+ SSCG_PLL_REF_DIVR2_MASK);
+ val |= SSCG_PLL_OUTPUT_DIV_VAL(3);
+ val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(8);
+ val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(45);
+ val |= SSCG_PLL_REF_DIVR2_VAL(30);
+ writel(val, pll_cfg_reg2);
+ break;
+ default:
+ break;
+ }
+
+ /* Clear power down bit */
+ clrbits_le32(pll_control_reg, SSCG_PLL_PD_MASK);
+ /* Eanble ARM_PLL/SYS_PLL */
+ setbits_le32(pll_control_reg, SSCG_PLL_DRAM_PLL_CLKE_MASK);
+
+ /* Clear bypass */
+ clrbits_le32(pll_control_reg, SSCG_PLL_BYPASS1_MASK);
+ __udelay(100);
+ clrbits_le32(pll_control_reg, SSCG_PLL_BYPASS2_MASK);
+ /* Wait lock */
+ while (!(readl(pll_control_reg) & SSCG_PLL_LOCK_MASK))
+ ;
+}
+
+int frac_pll_init(u32 pll, enum frac_pll_out_val val)
+{
+ void __iomem *pll_cfg0, __iomem *pll_cfg1;
+ u32 val_cfg0, val_cfg1;
+ int ret;
+
+ switch (pll) {
+ case ANATOP_ARM_PLL:
+ pll_cfg0 = &ana_pll->arm_pll_cfg0;
+ pll_cfg1 = &ana_pll->arm_pll_cfg1;
+
+ if (val == FRAC_PLL_OUT_1000M)
+ val_cfg1 = FRAC_PLL_INT_DIV_CTL_VAL(49);
+ else
+ val_cfg1 = FRAC_PLL_INT_DIV_CTL_VAL(79);
+ val_cfg0 = FRAC_PLL_CLKE_MASK | FRAC_PLL_REFCLK_SEL_OSC_25M |
+ FRAC_PLL_LOCK_SEL_MASK | FRAC_PLL_NEWDIV_VAL_MASK |
+ FRAC_PLL_REFCLK_DIV_VAL(4) |
+ FRAC_PLL_OUTPUT_DIV_VAL(0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* bypass the clock */
+ setbits_le32(pll_cfg0, FRAC_PLL_BYPASS_MASK);
+ /* Set the value */
+ writel(val_cfg1, pll_cfg1);
+ writel(val_cfg0 | FRAC_PLL_BYPASS_MASK, pll_cfg0);
+ val_cfg0 = readl(pll_cfg0);
+ /* unbypass the clock */
+ clrbits_le32(pll_cfg0, FRAC_PLL_BYPASS_MASK);
+ ret = readl_poll_timeout(pll_cfg0, val_cfg0,
+ val_cfg0 & FRAC_PLL_LOCK_MASK, 1);
+ if (ret)
+ printf("%s timeout\n", __func__);
+ clrbits_le32(pll_cfg0, FRAC_PLL_NEWDIV_VAL_MASK);
+
+ return 0;
+}
+
+int sscg_pll_init(u32 pll)
+{
+ void __iomem *pll_cfg0, __iomem *pll_cfg1, __iomem *pll_cfg2;
+ u32 val_cfg0, val_cfg1, val_cfg2, val;
+ u32 bypass1_mask = 0x20, bypass2_mask = 0x10;
+ int ret;
+
+ switch (pll) {
+ case ANATOP_SYSTEM_PLL1:
+ pll_cfg0 = &ana_pll->sys_pll1_cfg0;
+ pll_cfg1 = &ana_pll->sys_pll1_cfg1;
+ pll_cfg2 = &ana_pll->sys_pll1_cfg2;
+ /* 800MHz */
+ val_cfg2 = SSCG_PLL_FEEDBACK_DIV_F1_VAL(3) |
+ SSCG_PLL_FEEDBACK_DIV_F2_VAL(3);
+ val_cfg1 = 0;
+ val_cfg0 = SSCG_PLL_CLKE_MASK | SSCG_PLL_DIV2_CLKE_MASK |
+ SSCG_PLL_DIV3_CLKE_MASK | SSCG_PLL_DIV4_CLKE_MASK |
+ SSCG_PLL_DIV5_CLKE_MASK | SSCG_PLL_DIV6_CLKE_MASK |
+ SSCG_PLL_DIV8_CLKE_MASK | SSCG_PLL_DIV10_CLKE_MASK |
+ SSCG_PLL_DIV20_CLKE_MASK | SSCG_PLL_LOCK_SEL_MASK |
+ SSCG_PLL_REFCLK_SEL_OSC_25M;
+ break;
+ case ANATOP_SYSTEM_PLL2:
+ pll_cfg0 = &ana_pll->sys_pll2_cfg0;
+ pll_cfg1 = &ana_pll->sys_pll2_cfg1;
+ pll_cfg2 = &ana_pll->sys_pll2_cfg2;
+ /* 1000MHz */
+ val_cfg2 = SSCG_PLL_FEEDBACK_DIV_F1_VAL(3) |
+ SSCG_PLL_FEEDBACK_DIV_F2_VAL(4);
+ val_cfg1 = 0;
+ val_cfg0 = SSCG_PLL_CLKE_MASK | SSCG_PLL_DIV2_CLKE_MASK |
+ SSCG_PLL_DIV3_CLKE_MASK | SSCG_PLL_DIV4_CLKE_MASK |
+ SSCG_PLL_DIV5_CLKE_MASK | SSCG_PLL_DIV6_CLKE_MASK |
+ SSCG_PLL_DIV8_CLKE_MASK | SSCG_PLL_DIV10_CLKE_MASK |
+ SSCG_PLL_DIV20_CLKE_MASK | SSCG_PLL_LOCK_SEL_MASK |
+ SSCG_PLL_REFCLK_SEL_OSC_25M;
+ break;
+ case ANATOP_SYSTEM_PLL3:
+ pll_cfg0 = &ana_pll->sys_pll3_cfg0;
+ pll_cfg1 = &ana_pll->sys_pll3_cfg1;
+ pll_cfg2 = &ana_pll->sys_pll3_cfg2;
+ /* 800MHz */
+ val_cfg2 = SSCG_PLL_FEEDBACK_DIV_F1_VAL(3) |
+ SSCG_PLL_FEEDBACK_DIV_F2_VAL(3);
+ val_cfg1 = 0;
+ val_cfg0 = SSCG_PLL_PLL3_CLKE_MASK | SSCG_PLL_LOCK_SEL_MASK |
+ SSCG_PLL_REFCLK_SEL_OSC_25M;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /*bypass*/
+ setbits_le32(pll_cfg0, bypass1_mask | bypass2_mask);
+ /* set value */
+ writel(val_cfg2, pll_cfg2);
+ writel(val_cfg1, pll_cfg1);
+ /*unbypass1 and wait 70us */
+ writel(val_cfg0 | bypass2_mask, pll_cfg1);
+
+ __udelay(70);
+
+ /* unbypass2 and wait lock */
+ writel(val_cfg0, pll_cfg1);
+ ret = readl_poll_timeout(pll_cfg0, val, val & SSCG_PLL_LOCK_MASK, 1);
+ if (ret)
+ printf("%s timeout\n", __func__);
+
+ return ret;
+}
+
+int clock_init(void)
+{
+ u32 grade;
+
+ clock_set_target_val(ARM_A53_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(0));
+
+ /*
+ * 8MQ only supports two grades: consumer and industrial.
+ * We set ARM clock to 1Ghz for consumer, 800Mhz for industrial
+ */
+ grade = get_cpu_temp_grade(NULL, NULL);
+ if (!grade) {
+ frac_pll_init(ANATOP_ARM_PLL, FRAC_PLL_OUT_1000M);
+ clock_set_target_val(ARM_A53_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(1) |
+ CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1));
+ } else {
+ frac_pll_init(ANATOP_ARM_PLL, FRAC_PLL_OUT_1600M);
+ clock_set_target_val(ARM_A53_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(1) |
+ CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2));
+ }
+ /*
+ * According to ANAMIX SPEC
+ * sys pll1 fixed at 800MHz
+ * sys pll2 fixed at 1GHz
+ * Here we only enable the outputs.
+ */
+ setbits_le32(&ana_pll->sys_pll1_cfg0, SSCG_PLL_CLKE_MASK |
+ SSCG_PLL_DIV2_CLKE_MASK | SSCG_PLL_DIV3_CLKE_MASK |
+ SSCG_PLL_DIV4_CLKE_MASK | SSCG_PLL_DIV5_CLKE_MASK |
+ SSCG_PLL_DIV6_CLKE_MASK | SSCG_PLL_DIV8_CLKE_MASK |
+ SSCG_PLL_DIV10_CLKE_MASK | SSCG_PLL_DIV20_CLKE_MASK);
+
+ setbits_le32(&ana_pll->sys_pll2_cfg0, SSCG_PLL_CLKE_MASK |
+ SSCG_PLL_DIV2_CLKE_MASK | SSCG_PLL_DIV3_CLKE_MASK |
+ SSCG_PLL_DIV4_CLKE_MASK | SSCG_PLL_DIV5_CLKE_MASK |
+ SSCG_PLL_DIV6_CLKE_MASK | SSCG_PLL_DIV8_CLKE_MASK |
+ SSCG_PLL_DIV10_CLKE_MASK | SSCG_PLL_DIV20_CLKE_MASK);
+
+ clock_set_target_val(NAND_USDHC_BUS_CLK_ROOT, CLK_ROOT_ON |
+ CLK_ROOT_SOURCE_SEL(1));
+
+ init_wdog_clk();
+ clock_enable(CCGR_TSENSOR, 1);
+
+ return 0;
+}
+#endif
+
+/*
+ * Dump some clockes.
+ */
+#ifndef CONFIG_SPL_BUILD
+int do_imx8m_showclocks(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ u32 freq;
+
+ freq = decode_frac_pll(ARM_PLL_CLK);
+ printf("ARM_PLL %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL1_800M_CLK);
+ printf("SYS_PLL1_800 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL1_400M_CLK);
+ printf("SYS_PLL1_400 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL1_266M_CLK);
+ printf("SYS_PLL1_266 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL1_200M_CLK);
+ printf("SYS_PLL1_200 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL1_160M_CLK);
+ printf("SYS_PLL1_160 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL1_133M_CLK);
+ printf("SYS_PLL1_133 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL1_100M_CLK);
+ printf("SYS_PLL1_100 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL1_80M_CLK);
+ printf("SYS_PLL1_80 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL1_40M_CLK);
+ printf("SYS_PLL1_40 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL2_1000M_CLK);
+ printf("SYS_PLL2_1000 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL2_500M_CLK);
+ printf("SYS_PLL2_500 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL2_333M_CLK);
+ printf("SYS_PLL2_333 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL2_250M_CLK);
+ printf("SYS_PLL2_250 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL2_200M_CLK);
+ printf("SYS_PLL2_200 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL2_166M_CLK);
+ printf("SYS_PLL2_166 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL2_125M_CLK);
+ printf("SYS_PLL2_125 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL2_100M_CLK);
+ printf("SYS_PLL2_100 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL2_50M_CLK);
+ printf("SYS_PLL2_50 %8d MHz\n", freq / 1000000);
+ freq = decode_sscg_pll(SYSTEM_PLL3_CLK);
+ printf("SYS_PLL3 %8d MHz\n", freq / 1000000);
+ freq = mxc_get_clock(UART1_CLK_ROOT);
+ printf("UART1 %8d MHz\n", freq / 1000000);
+ freq = mxc_get_clock(USDHC1_CLK_ROOT);
+ printf("USDHC1 %8d MHz\n", freq / 1000000);
+ freq = mxc_get_clock(QSPI_CLK_ROOT);
+ printf("QSPI %8d MHz\n", freq / 1000000);
+ return 0;
+}
+
+U_BOOT_CMD(
+ clocks, CONFIG_SYS_MAXARGS, 1, do_imx8m_showclocks,
+ "display clocks",
+ ""
+);
+#endif
static struct ccm_reg *ccm_reg = (struct ccm_reg *)CCM_BASE_ADDR;
+#ifdef CONFIG_IMX8MQ
static struct clk_root_map root_array[] = {
{ARM_A53_CLK_ROOT, CORE_CLOCK_SLICE, 0,
{OSC_25M_CLK, ARM_PLL_CLK, SYSTEM_PLL2_500M_CLK,
{DRAM_PLL1_CLK}
},
};
+#elif defined(CONFIG_IMX8MM)
+static struct clk_root_map root_array[] = {
+ {NAND_USDHC_BUS_CLK_ROOT, BUS_CLOCK_SLICE, 2,
+ {OSC_24M_CLK, SYSTEM_PLL1_266M_CLK, SYSTEM_PLL1_800M_CLK,
+ SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_133M_CLK,
+ SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL1_CLK}
+ },
+ {NOC_CLK_ROOT, BUS_CLOCK_SLICE, 10,
+ {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, SYSTEM_PLL3_CLK,
+ SYSTEM_PLL2_1000M_CLK, SYSTEM_PLL2_500M_CLK,
+ AUDIO_PLL1_CLK, VIDEO_PLL_CLK, AUDIO_PLL2_CLK}
+ },
+ {NOC_APB_CLK_ROOT, BUS_CLOCK_SLICE, 11,
+ {OSC_24M_CLK, SYSTEM_PLL1_400M_CLK, SYSTEM_PLL3_CLK,
+ SYSTEM_PLL2_333M_CLK, SYSTEM_PLL2_200M_CLK,
+ SYSTEM_PLL1_800M_CLK, AUDIO_PLL1_CLK, VIDEO_PLL_CLK}
+ },
+ {DRAM_ALT_CLK_ROOT, IP_CLOCK_SLICE, 0,
+ {OSC_24M_CLK, SYSTEM_PLL1_800M_CLK, SYSTEM_PLL1_100M_CLK,
+ SYSTEM_PLL2_500M_CLK, SYSTEM_PLL2_1000M_CLK,
+ SYSTEM_PLL3_CLK, AUDIO_PLL1_CLK, SYSTEM_PLL1_266M_CLK}
+ },
+ {DRAM_APB_CLK_ROOT, IP_CLOCK_SLICE, 1,
+ {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+ SYSTEM_PLL1_160M_CLK, SYSTEM_PLL1_800M_CLK,
+ SYSTEM_PLL3_CLK, SYSTEM_PLL2_250M_CLK, AUDIO_PLL2_CLK}
+ },
+ {UART1_CLK_ROOT, IP_CLOCK_SLICE, 30,
+ {OSC_24M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+ SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+ EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+ },
+ {UART2_CLK_ROOT, IP_CLOCK_SLICE, 31,
+ {OSC_24M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+ SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+ EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+ },
+ {UART3_CLK_ROOT, IP_CLOCK_SLICE, 32,
+ {OSC_24M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+ SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+ EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+ },
+ {UART4_CLK_ROOT, IP_CLOCK_SLICE, 33,
+ {OSC_24M_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_200M_CLK,
+ SYSTEM_PLL2_100M_CLK, SYSTEM_PLL3_CLK,
+ EXT_CLK_2, EXT_CLK_3, AUDIO_PLL2_CLK}
+ },
+ {GIC_CLK_ROOT, IP_CLOCK_SLICE, 36,
+ {OSC_24M_CLK, SYSTEM_PLL2_200M_CLK, SYSTEM_PLL1_40M_CLK,
+ SYSTEM_PLL2_100M_CLK, SYSTEM_PLL1_800M_CLK,
+ EXT_CLK_2, EXT_CLK_4, AUDIO_PLL2_CLK}
+ },
+ {WDOG_CLK_ROOT, IP_CLOCK_SLICE, 50,
+ {OSC_24M_CLK, SYSTEM_PLL1_133M_CLK, SYSTEM_PLL1_160M_CLK,
+ VPU_PLL_CLK, SYSTEM_PLL2_125M_CLK,
+ SYSTEM_PLL3_CLK, SYSTEM_PLL1_80M_CLK, SYSTEM_PLL2_166M_CLK}
+ },
+ {DRAM_SEL_CFG, DRAM_SEL_CLOCK_SLICE, 0,
+ {DRAM_PLL1_CLK}
+ },
+};
+#endif
static int select(enum clk_root_index clock_id)
{
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#define __ASSEMBLY__
+
+FIT
+BOOT_FROM sd
+LOADER spl/u-boot-spl-ddr.bin 0x7E1000
+SECOND_LOADER u-boot.itb 0x40200000 0x60000
+
+DDR_FW lpddr4_pmu_train_1d_imem.bin
+DDR_FW lpddr4_pmu_train_1d_dmem.bin
+DDR_FW lpddr4_pmu_train_2d_imem.bin
+DDR_FW lpddr4_pmu_train_2d_dmem.bin
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/syscounter.h>
#include <asm/armv8/mmu.h>
+#include <dm/uclass.h>
#include <errno.h>
#include <fdt_support.h>
#include <fsl_wdog.h>
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_SECURE_BOOT)
+#if defined(CONFIG_IMX_HAB)
struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
.bank = 1,
.word = 3,
/* Enable TZASC and lock setting */
setbits_le32(&gpr->gpr[10], GPR_TZASC_EN);
setbits_le32(&gpr->gpr[10], GPR_TZASC_EN_LOCK);
+ if (IS_ENABLED(CONFIG_IMX8MM))
+ setbits_le32(&gpr->gpr[10], BIT(1));
+ /*
+ * set Region 0 attribute to allow secure and non-secure
+ * read/write permission. Found some masters like usb dwc3
+ * controllers can't work with secure memory.
+ */
+ writel(0xf0000000, TZASC_BASE_ADDR + 0x108);
}
void set_wdog_reset(struct wdog_regs *wdog)
/* DRAM1 */
.virt = 0x40000000UL,
.phys = 0x40000000UL,
- .size = 0xC0000000UL,
+ .size = PHYS_SDRAM_SIZE,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_OUTER_SHARE
+#ifdef PHYS_SDRAM_2_SIZE
}, {
/* DRAM2 */
.virt = 0x100000000UL,
.phys = 0x100000000UL,
- .size = 0x040000000UL,
+ .size = PHYS_SDRAM_2_SIZE,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_OUTER_SHARE
+#endif
}, {
/* List terminator */
0,
struct mm_region *mem_map = imx8m_mem_map;
+void enable_caches(void)
+{
+ /*
+ * If OPTEE runs, remove OPTEE memory from MMU table to
+ * avoid speculative prefetch. OPTEE runs at the top of
+ * the first memory bank
+ */
+ if (rom_pointer[1])
+ imx8m_mem_map[5].size -= rom_pointer[1];
+
+ icache_enable();
+ dcache_enable();
+}
+
+static u32 get_cpu_variant_type(u32 type)
+{
+ struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+ struct fuse_bank *bank = &ocotp->bank[1];
+ struct fuse_bank1_regs *fuse =
+ (struct fuse_bank1_regs *)bank->fuse_regs;
+
+ u32 value = readl(&fuse->tester4);
+
+ if (type == MXC_CPU_IMX8MM) {
+ switch (value & 0x3) {
+ case 2:
+ if (value & 0x1c0000)
+ return MXC_CPU_IMX8MMDL;
+ else
+ return MXC_CPU_IMX8MMD;
+ case 3:
+ if (value & 0x1c0000)
+ return MXC_CPU_IMX8MMSL;
+ else
+ return MXC_CPU_IMX8MMS;
+ default:
+ if (value & 0x1c0000)
+ return MXC_CPU_IMX8MML;
+ break;
+ }
+ }
+
+ return type;
+}
+
u32 get_cpu_rev(void)
{
struct anamix_pll *ana_pll = (struct anamix_pll *)ANATOP_BASE_ADDR;
u32 reg = readl(&ana_pll->digprog);
u32 type = (reg >> 16) & 0xff;
+ u32 major_low = (reg >> 8) & 0xff;
u32 rom_version;
reg &= 0xff;
- if (reg == CHIP_REV_1_0) {
- /*
- * For B0 chip, the DIGPROG is not updated, still TO1.0.
- * we have to check ROM version further
- */
- rom_version = readl((void __iomem *)ROM_VERSION_A0);
- if (rom_version != CHIP_REV_1_0) {
- rom_version = readl((void __iomem *)ROM_VERSION_B0);
- if (rom_version >= CHIP_REV_2_0)
- reg = CHIP_REV_2_0;
+ /* i.MX8MM */
+ if (major_low == 0x41) {
+ type = get_cpu_variant_type(MXC_CPU_IMX8MM);
+ } else {
+ if (reg == CHIP_REV_1_0) {
+ /*
+ * For B0 chip, the DIGPROG is not updated, still TO1.0.
+ * we have to check ROM version further
+ */
+ rom_version = readl((void __iomem *)ROM_VERSION_A0);
+ if (rom_version != CHIP_REV_1_0) {
+ rom_version = readl((void __iomem *)ROM_VERSION_B0);
+ if (rom_version >= CHIP_REV_2_0)
+ reg = CHIP_REV_2_0;
+ }
}
}
writew(enable, &wdog3->wmcr);
}
+int arch_cpu_init_dm(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = uclass_get_device_by_name(UCLASS_CLK,
+ "clock-controller@30380000",
+ &dev);
+ if (ret < 0) {
+ printf("Failed to find clock node. Check device tree\n");
+ return ret;
+ }
+
+ return 0;
+}
+
int arch_cpu_init(void)
{
struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+ /*
+ * ROM might disable clock for SCTR,
+ * enable the clock before timer_init.
+ */
+ if (IS_ENABLED(CONFIG_SPL_BUILD))
+ clock_enable(CCGR_SCTR, 1);
/*
* Init timer at very early state, because sscg pll setting
* will use it
}
#endif
+#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SYSRESET)
void reset_cpu(ulong addr)
{
- struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
+ struct watchdog_regs *wdog = (struct watchdog_regs *)addr;
- /* Clear WDA to trigger WDOG_B immediately */
- writew((WCR_WDE | WCR_SRS), &wdog->wcr);
+ if (!addr)
+ wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
- while (1) {
- /*
- * spin for .5 seconds before reset
- */
- }
+ /* Clear WDA to trigger WDOG_B immediately */
+ writew((WCR_WDE | WCR_SRS), &wdog->wcr);
+
+ while (1) {
+ /*
+ * spin for .5 seconds before reset
+ */
+ }
}
+#endif
images {
uboot@1 {
description = "U-Boot (64-bit)";
+ os = "u-boot";
data = /incbin/("$BL33");
type = "standalone";
arch = "arm64";
};
atf@1 {
description = "ARM Trusted Firmware";
+ os = "arm-trusted-firmware";
data = /incbin/("$BL31");
type = "firmware";
arch = "arm64";
cat << __CONF_SECTION_EOF
config@$cnt {
description = "$(basename $dtname .dtb)";
- firmware = "uboot@1";
- loadables = "atf@1", "tee@1";
+ firmware = "atf@1";
+ loadables = "uboot@1", "tee@1";
fdt = "fdt@$cnt";
};
__CONF_SECTION_EOF
cat << __CONF_SECTION1_EOF
config@$cnt {
description = "$(basename $dtname .dtb)";
- firmware = "uboot@1";
- loadables = "atf@1";
+ firmware = "atf@1";
+ loadables = "uboot@1";
fdt = "fdt@$cnt";
};
__CONF_SECTION1_EOF
select SYSCOUNTER_TIMER
select SYS_L2CACHE_OFF
+config MX6_OCRAM_256KB
+ bool "Support 256KB OCRAM"
+ depends on MX6D || MX6Q
+ help
+ Allows using the full 256KB size of the OCRAM on the MX6Q/MX6D series
+ of chips, such as for SPL. The OCRAM of the Lite series of chips is
+ only 128KB, so using this option will prevent the resulting code from
+ working on those chips.
+
config MX6_DDRCAL
bool "Include dynamic DDR calibration routines"
depends on SPL
config TARGET_APALIS_IMX6
bool "Toradex Apalis iMX6 board"
select BOARD_LATE_INIT
+ select MX6Q
select DM
select DM_SERIAL
select DM_THERMAL
config TARGET_DISPLAY5
bool "LWN DISPLAY5 board"
select DM
+ select DM_ETH
+ select DM_I2C
+ select DM_MMC
+ select DM_SPI
+ select DM_GPIO
select DM_SERIAL
select SUPPORT_SPL
imply CMD_DM
select SUPPORT_SPL
imply CMD_SATA
+config TARGET_PICO_IMX6
+ bool "PICO-IMX6"
+ select BOARD_EARLY_INIT_F
+ select BOARD_LATE_INIT
+ select DM
+ select DM_THERMAL
+ select MX6QDL
+ select SUPPORT_SPL
+ imply CMD_DM
+
config TARGET_PICO_IMX6UL
bool "PICO-IMX6UL-EMMC"
select MX6UL
source "board/seco/Kconfig"
source "board/sks-kinkel/sksimx6/Kconfig"
source "board/solidrun/mx6cuboxi/Kconfig"
+source "board/technexion/pico-imx6/Kconfig"
source "board/technexion/pico-imx6ul/Kconfig"
source "board/tbs/tbs2910/Kconfig"
source "board/tqc/tqma6/Kconfig"
}
#endif
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
void hab_caam_clock_enable(unsigned char enable)
{
u32 reg;
return 0;
}
+#ifndef CONFIG_MX6SX
+void enable_ipu_clock(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ int reg;
+ reg = readl(&mxc_ccm->CCGR3);
+ reg |= MXC_CCM_CCGR3_IPU1_IPU_MASK;
+ writel(reg, &mxc_ccm->CCGR3);
+
+ if (is_mx6dqp()) {
+ setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_PRG_CLK0_MASK);
+ setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU2_IPU_MASK);
+ }
+}
+#endif
+
#ifndef CONFIG_SPL_BUILD
/*
* Dump some core clockes.
return 0;
}
-#ifndef CONFIG_MX6SX
-void enable_ipu_clock(void)
-{
- struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
- int reg;
- reg = readl(&mxc_ccm->CCGR3);
- reg |= MXC_CCM_CCGR3_IPU1_IPU_MASK;
- writel(reg, &mxc_ccm->CCGR3);
-
- if (is_mx6dqp()) {
- setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_PRG_CLK0_MASK);
- setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU2_IPU_MASK);
- }
-}
-#endif
-
#if defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) || defined(CONFIG_MX6DL) || \
defined(CONFIG_MX6S)
static void disable_ldb_di_clock_sources(void)
};
#endif
-#if defined(CONFIG_SECURE_BOOT)
+#if defined(CONFIG_IMX_HAB)
struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
.bank = 0,
.word = 6,
type = MXC_CPU_MX6D;
}
+ if (type == MXC_CPU_MX6ULL) {
+ if (readl(SRC_BASE_ADDR + 0x1c) & (1 << 6))
+ type = MXC_CPU_MX6ULZ;
+ }
}
major = ((reg >> 8) & 0xff);
if ((major >= 1) &&
}
}
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
void hab_caam_clock_enable(unsigned char enable)
{
if (enable)
}
#endif
-#if defined(CONFIG_SECURE_BOOT)
+#if defined(CONFIG_IMX_HAB)
struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
.bank = 1,
.word = 3,
config SYS_SOC
default "mx7ulp"
+config MX7ULP
+ bool
+
choice
prompt "MX7ULP board select"
optional
config TARGET_MX7ULP_EVK
- bool "Support mx7ulp EVK board"
+ bool "Support mx7ulp EVK board"
+ select MX7ULP
select SYS_ARCH_TIMER
endchoice
return pcc_clock_get_rate(lpuart_pcc_clks[index - 4]);
}
-#ifdef CONFIG_SYS_LPI2C_IMX
+#ifdef CONFIG_SYS_I2C_IMX_LPI2C
int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
{
/* Set parent to FIRC DIV2 clock */
scg_a7_soscdiv_init();
- /* APLL PFD1 = 270Mhz, PFD2=480Mhz, PFD3=800Mhz */
+ scg_a7_init_core_clk();
+
+ /* APLL PFD1 = 270Mhz, PFD2=345.6Mhz, PFD3=800Mhz */
scg_enable_pll_pfd(SCG_APLL_PFD1_CLK, 35);
- scg_enable_pll_pfd(SCG_APLL_PFD2_CLK, 20);
+ scg_enable_pll_pfd(SCG_APLL_PFD2_CLK, 28);
scg_enable_pll_pfd(SCG_APLL_PFD3_CLK, 12);
init_clk_lpuart();
enable_usboh3_clk(1);
}
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
void hab_caam_clock_enable(unsigned char enable)
{
if (enable)
static u32 scg_nic_get_rate(enum scg_clk clk)
{
- u32 reg, val, rate;
+ u32 reg, val, rate, nic0_rate;
u32 shift, mask;
reg = readl(&scg1_regs->niccsr);
val = (reg & SCG_NICCSR_NIC0DIV_MASK) >> SCG_NICCSR_NIC0DIV_SHIFT;
rate = rate / (val + 1);
+ nic0_rate = rate;
clk_debug("scg_nic_get_rate NIC0 rate %u\n", rate);
return 0;
}
+ /*
+ * On RevB, the nic_bus and nic_ext dividers are parallel
+ * not chained with nic div
+ */
+ if (soc_rev() >= CHIP_REV_2_0)
+ rate = nic0_rate;
+
val = (reg & mask) >> shift;
rate = rate / (val + 1);
case SCG_SCS_SLOW_IRC:
case SCG_SCS_FAST_IRC:
case SCG_SCS_RTC_OSC:
- rate = scg_src_get_rate(scg_scs_array[val]);
+ rate = scg_src_get_rate(scg_scs_array[val - 1]);
break;
case 5:
rate = scg_apll_get_rate();
infreq = infreq / pre_div;
- return infreq * mult + infreq * num / denom;
+ if (denom)
+ return infreq * mult + infreq * num / denom;
+ else
+ return infreq * mult;
case PLL_A7_APLL:
reg = readl(&scg1_regs->apllcsr);
infreq = infreq / pre_div;
- return infreq * mult + infreq * num / denom;
+ if (denom)
+ return infreq * mult + infreq * num / denom;
+ else
+ return infreq * mult;
case PLL_USB:
reg = readl(&scg1_regs->upllcsr);
debug("SCG RCCR Value: 0x%x\n", readl(&scg1_regs->rccr));
debug("SCG Clock Status: 0x%x\n", readl(&scg1_regs->csr));
}
+
+void scg_a7_init_core_clk(void)
+{
+ u32 val = 0;
+
+ /*
+ * The normal target frequency for ULP B0 is 500Mhz,
+ * but ROM set it to 413Mhz, need to change SPLL PFD0 FRAC
+ */
+ if (soc_rev() >= CHIP_REV_2_0) {
+ /* Switch RCCR SCG to SOSC, firstly check the SOSC is valid */
+ if ((readl(&scg1_regs->sosccsr) & SCG_SOSC_CSR_SOSCVLD_MASK)) {
+ val = readl(&scg1_regs->rccr);
+ val &= (~SCG_CCR_SCS_MASK);
+ val |= ((SCG_SCS_SYS_OSC) << SCG_CCR_SCS_SHIFT);
+ writel(val, &scg1_regs->rccr);
+
+ /* Switch the PLLS to SPLL clk */
+ val = readl(&scg1_regs->spllcfg);
+ val &= ~SCG_PLL_CFG_PLLSEL_MASK;
+ writel(val, &scg1_regs->spllcfg);
+
+ /*
+ * Re-configure PFD0 to 19,
+ * A7 SPLL(528MHz) * 18 / 19 = 500MHz
+ */
+ scg_enable_pll_pfd(SCG_SPLL_PFD0_CLK, 19);
+
+ /* Switch the PLLS to SPLL PFD0 */
+ val = readl(&scg1_regs->spllcfg);
+ val |= SCG_PLL_CFG_PLLSEL_MASK;
+ writel(val, &scg1_regs->spllcfg);
+
+ /* Set RCCR SCG to SPLL clk out */
+ val = readl(&scg1_regs->rccr);
+ val &= (~SCG_CCR_SCS_MASK);
+ val |= ((SCG_SCS_SYS_PLL) << SCG_CCR_SCS_SHIFT);
+ writel(val, &scg1_regs->rccr);
+ }
+ }
+}
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/hab.h>
static char *get_reset_cause(char *);
-#if defined(CONFIG_SECURE_BOOT)
+#if defined(CONFIG_IMX_HAB)
struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
.bank = 29,
.word = 6,
};
#endif
+#define ROM_VERSION_ADDR 0x80
u32 get_cpu_rev(void)
{
- /* Temporally hard code the CPU rev to 0x73, rev 1.0. Fix it later */
- return (MXC_CPU_MX7ULP << 12) | (1 << 4);
+ /* Check the ROM version for cpu revision */
+ u32 rom_version = readl((void __iomem *)ROM_VERSION_ADDR);
+
+ return (MXC_CPU_MX7ULP << 12) | (rom_version & 0xFF);
}
#ifdef CONFIG_REVISION_TAG
/* clock configuration. */
clock_init();
+ if (soc_rev() < CHIP_REV_2_0) {
+ /* enable dumb pmic */
+ writel((readl(SNVS_LP_LPCR) | SNVS_LPCR_DPEN), SNVS_LP_LPCR);
+ }
return;
}
return board_mmc_get_env_dev(devno);
}
#endif
+
+enum boot_device get_boot_device(void)
+{
+ struct bootrom_sw_info **p =
+ (struct bootrom_sw_info **)ROM_SW_INFO_ADDR;
+
+ enum boot_device boot_dev = SD1_BOOT;
+ u8 boot_type = (*p)->boot_dev_type;
+ u8 boot_instance = (*p)->boot_dev_instance;
+
+ switch (boot_type) {
+ case BOOT_TYPE_SD:
+ boot_dev = boot_instance + SD1_BOOT;
+ break;
+ case BOOT_TYPE_MMC:
+ boot_dev = boot_instance + MMC1_BOOT;
+ break;
+ case BOOT_TYPE_USB:
+ boot_dev = USB_BOOT;
+ break;
+ default:
+ break;
+ }
+
+ return boot_dev;
+}
DECLARE_GLOBAL_DATA_PTR;
+__weak int spl_board_boot_device(enum boot_device boot_dev_spl)
+{
+ return 0;
+}
+
#if defined(CONFIG_MX6)
/* determine boot device from SRC_SBMR1 (BOOT_CFG[4:1]) or SRC_GPR9 register */
u32 spl_boot_device(void)
{
unsigned int bmode = readl(&src_base->sbmr2);
u32 reg = imx6_src_get_boot_mode();
- u32 mmc_index = ((reg >> 11) & 0x03);
/*
* Check for BMODE if serial downloader is enabled
/* SD/eSD: 8.5.3, Table 8-15 */
case IMX6_BMODE_SD:
case IMX6_BMODE_ESD:
+ return BOOT_DEVICE_MMC1;
+ /* MMC/eMMC: 8.5.3 */
case IMX6_BMODE_MMC:
case IMX6_BMODE_EMMC:
- if (mmc_index == 1)
- return BOOT_DEVICE_MMC2;
- else
- return BOOT_DEVICE_MMC1;
+ return BOOT_DEVICE_MMC1;
/* NAND Flash: 8.5.2, Table 8-10 */
case IMX6_BMODE_NAND_MIN ... IMX6_BMODE_NAND_MAX:
return BOOT_DEVICE_NAND;
+#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
+ /* QSPI boot */
+ case IMX6_BMODE_QSPI:
+ return BOOT_DEVICE_SPI;
+#endif
}
return BOOT_DEVICE_NONE;
}
enum boot_device boot_device_spl = get_boot_device();
+ if (IS_ENABLED(CONFIG_IMX8MM))
+ return spl_board_boot_device(boot_device_spl);
+
switch (boot_device_spl) {
#if defined(CONFIG_MX7)
case SD1_BOOT:
/* called from spl_mmc to see type of boot mode for storage (RAW or FAT) */
u32 spl_boot_mode(const u32 boot_device)
{
+/*
+ * When CONFIG_SPL_FORCE_MMC_BOOT is defined the 'boot_device' is used
+ * unconditionally to decide about device to use for booting.
+ * This is crucial for falcon boot mode, when board boots up (i.e. ROM
+ * loads SPL) from slow SPI-NOR memory and afterwards the SPL's 'falcon' boot
+ * mode is used to load Linux OS from eMMC partition.
+ */
+#ifdef CONFIG_SPL_FORCE_MMC_BOOT
+ switch (boot_device) {
+#else
switch (spl_boot_device()) {
+#endif
/* for MMC return either RAW or FAT mode */
case BOOT_DEVICE_MMC1:
case BOOT_DEVICE_MMC2:
}
#endif
-#if defined(CONFIG_SECURE_BOOT)
+#if defined(CONFIG_IMX_HAB)
/*
* +------------+ 0x0 (DDR_UIMAGE_START) -
}
}
+#if !defined(CONFIG_SPL_FIT_SIGNATURE)
ulong board_spl_fit_size_align(ulong size)
{
/*
hang();
}
}
+#endif
#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+IMAGE_VERSION 2
+BOOT_FROM qspi
+
+/*
+ * Secure boot support
+ */
+#ifdef CONFIG_SECURE_BOOT
+CSF CONFIG_CSF_SIZE
+#endif
/*
* Secure boot support
*/
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
DECLARE_GLOBAL_DATA_PTR;
-void board_return_to_bootrom(void)
+int board_return_to_bootrom(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev)
{
back_to_bootrom(BROM_BOOT_NEXTSTAGE);
+
+ return 0;
}
__weak const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
}
}
-void board_return_to_bootrom(void)
+int board_return_to_bootrom(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev)
{
back_to_bootrom(BROM_BOOT_NEXTSTAGE);
+
+ return 0;
}
u32 spl_boot_device(void)
NITROGEN6X BOARD
M: Troy Kisky <troy.kisky@boundarydevices.com>
S: Maintained
+F: arch/arm/dts/imx6dl-nitrogen6x.dts
+F: arch/arm/dts/imx6q-nitrogen6x.dts
+F: arch/arm/dts/imx6q-sabrelite.dts
+F: arch/arm/dts/imx6qdl-nitrogen6x.dtsi
+F: arch/arm/dts/imx6qdl-sabrelite.dtsi
F: board/boundary/nitrogen6x/
F: include/configs/nitrogen6x.h
F: configs/mx6qsabrelite_defconfig
#define __ASSEMBLY__
#include <config.h>
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#include "asm/arch/mx6-ddr.h"
#define __ASSEMBLY__
#include <config.h>
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#include "asm/arch/mx6-ddr.h"
#define __ASSEMBLY__
#include <config.h>
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#include "asm/arch/mx6-ddr.h"
#define __ASSEMBLY__
#include <config.h>
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#include "asm/arch/mx6-ddr.h"
#define __ASSEMBLY__
#include <config.h>
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#include "asm/arch/mx6-ddr.h"
#define __ASSEMBLY__
#include <config.h>
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#include "asm/arch/mx6-ddr.h"
struct phy_device *phydev = NULL;
int ret;
+ gpio_request(WL12XX_WL_IRQ_GP, "wifi_irq");
+ gpio_request(IMX_GPIO_NR(6, 30), "rgmii_rxc");
+ gpio_request(IMX_GPIO_NR(6, 25), "rgmii_rd0");
+ gpio_request(IMX_GPIO_NR(6, 27), "rgmii_rd1");
+ gpio_request(IMX_GPIO_NR(6, 28), "rgmii_rd2");
+ gpio_request(IMX_GPIO_NR(6, 29), "rgmii_rd3");
+ gpio_request(IMX_GPIO_NR(6, 24), "rgmii_rx_ctl");
+ gpio_request(IMX_GPIO_NR(3, 23), "rgmii_reset_sabrelite");
+ gpio_request(IMX_GPIO_NR(1, 27), "rgmii_reset_nitrogen6x");
setup_iomux_enet();
#ifdef CONFIG_FEC_MXC
int checkboard(void)
{
- if (gpio_get_value(WL12XX_WL_IRQ_GP))
+ int ret = gpio_get_value(WL12XX_WL_IRQ_GP);
+
+ if (ret < 0) {
+ /* The gpios have not been probed yet. Read it myself */
+ struct gpio_regs *regs = (struct gpio_regs *)GPIO6_BASE_ADDR;
+ int gpio = WL12XX_WL_IRQ_GP & 0x1f;
+
+ ret = (readl(®s->gpio_psr) >> gpio) & 0x01;
+ }
+ if (ret)
puts("Board: Nitrogen6X\n");
else
puts("Board: SABRE Lite\n");
int misc_init_r(void)
{
+ gpio_request(RGB_BACKLIGHT_GP, "lvds backlight");
+ gpio_request(LVDS_BACKLIGHT_GP, "lvds backlight");
+ gpio_request(GP_USB_OTG_PWR, "usbotg power");
+ gpio_request(IMX_GPIO_NR(7, 12), "usbh1 hub reset");
+ gpio_request(IMX_GPIO_NR(2, 2), "back");
+ gpio_request(IMX_GPIO_NR(2, 4), "home");
+ gpio_request(IMX_GPIO_NR(2, 1), "menu");
+ gpio_request(IMX_GPIO_NR(2, 3), "search");
+ gpio_request(IMX_GPIO_NR(7, 13), "volup");
+ gpio_request(IMX_GPIO_NR(4, 5), "voldown");
#ifdef CONFIG_PREBOOT
preboot_keys();
#endif
--- /dev/null
+if TARGET_IMX8MM_EVK
+
+config SYS_BOARD
+ default "imx8mm_evk"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_CONFIG_NAME
+ default "imx8mm_evk"
+
+endif
--- /dev/null
+i.MX8MM EVK BOARD
+M: Peng Fan <peng.fan@nxp.com>
+S: Maintained
+F: board/freescale/imx8mm_evk/
+F: include/configs/imx8mm_evk.h
+F: configs/imx8mm_evk_defconfig
--- /dev/null
+#
+# Copyright 2018 NXP
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += imx8mm_evk.o
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o
+endif
--- /dev/null
+U-Boot for the NXP i.MX8MM EVK board
+
+Quick Start
+===========
+- Build the ARM Trusted firmware binary
+- Get ddr fimware
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+======================================
+Note: srctree is U-Boot source directory
+Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
+branch: imx_4.19.35_1.0.0
+$ make PLAT=imx8mm bl31
+$ cp build/imx8mm/release/bl31.bin $(srctree)
+
+Get the ddr and hdmi firmware
+=============================
+$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
+$ chmod +x firmware-imx-8.0.bin
+$ ./firmware-imx-8.0
+$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
+
+Build U-Boot
+============
+$ export CROSS_COMPILE=aarch64-poky-linux-
+$ make imx8mm_evk_defconfig
+$ export ATF_LOAD_ADDR=0x920000
+$ make flash.bin
+
+Burn the flash.bin to MicroSD card offset 33KB
+$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33
+
+Boot
+====
+Set Boot switch to SD boot
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ gd->ram_size = PHYS_SDRAM_SIZE;
+
+ return 0;
+}
+
+int board_init(void)
+{
+ return 0;
+}
+
+int board_late_init(void)
+{
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ env_set("board_name", "EVK");
+ env_set("board_rev", "iMX8MM");
+#endif
+ return 0;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/kernel.h>
+#include <common.h>
+#include <asm/arch/ddr.h>
+#include <asm/arch/lpddr4_define.h>
+
+struct dram_cfg_param lpddr4_ddrc_cfg[] = {
+ /* Start to config, default 3200mbps */
+ { DDRC_DBG1(0), 0x00000001 },
+ { DDRC_PWRCTL(0), 0x00000001 },
+ { DDRC_MSTR(0), 0xa1080020 },
+ { DDRC_RFSHTMG(0), 0x005b00d2 },
+ { DDRC_INIT0(0), 0xC003061B },
+ { DDRC_INIT1(0), 0x009D0000 },
+ { DDRC_INIT3(0), 0x00D4002D },
+ { DDRC_INIT4(0), (LPDDR4_MR3 << 16) | 0x0000 },
+ { DDRC_INIT6(0), 0x0066004a },
+ { DDRC_INIT7(0), 0x0006004a },
+
+ { DDRC_DRAMTMG0(0), 0x1A201B22 },
+ { DDRC_DRAMTMG1(0), 0x00060633 },
+ { DDRC_DRAMTMG3(0), 0x00C0C000 },
+ { DDRC_DRAMTMG4(0), 0x0F04080F },
+ { DDRC_DRAMTMG5(0), 0x02040C0C },
+ { DDRC_DRAMTMG6(0), 0x01010007 },
+ { DDRC_DRAMTMG7(0), 0x00000401 },
+ { DDRC_DRAMTMG12(0), 0x00020600 },
+ { DDRC_DRAMTMG13(0), 0x0C100002 },
+ { DDRC_DRAMTMG14(0), 0x000000E6 },
+ { DDRC_DRAMTMG17(0), 0x00A00050 },
+
+ { DDRC_ZQCTL0(0), 0x03200018 },
+ { DDRC_ZQCTL1(0), 0x028061A8 },
+ { DDRC_ZQCTL2(0), 0x00000000 },
+
+ { DDRC_DFITMG0(0), 0x0497820A },
+ { DDRC_DFITMG2(0), 0x0000170A },
+ { DDRC_DRAMTMG2(0), 0x070E171a },
+ { DDRC_DBICTL(0), 0x00000001 },
+
+ { DDRC_DFITMG1(0), 0x00080303 },
+ { DDRC_DFIUPD0(0), 0xE0400018 },
+ { DDRC_DFIUPD1(0), 0x00DF00E4 },
+ { DDRC_DFIUPD2(0), 0x80000000 },
+ { DDRC_DFIMISC(0), 0x00000011 },
+
+ { DDRC_DFIPHYMSTR(0), 0x00000000 },
+ { DDRC_RANKCTL(0), 0x00000c99 },
+
+ /* address mapping */
+ { DDRC_ADDRMAP0(0), 0x0000001f },
+ { DDRC_ADDRMAP1(0), 0x00080808 },
+ { DDRC_ADDRMAP2(0), 0x00000000 },
+ { DDRC_ADDRMAP3(0), 0x00000000 },
+ { DDRC_ADDRMAP4(0), 0x00001f1f },
+ { DDRC_ADDRMAP5(0), 0x07070707 },
+ { DDRC_ADDRMAP6(0), 0x07070707 },
+ { DDRC_ADDRMAP7(0), 0x00000f0f },
+
+ /* performance setting */
+ { DDRC_SCHED(0), 0x29001701 },
+ { DDRC_SCHED1(0), 0x0000002c },
+ { DDRC_PERFHPR1(0), 0x04000030 },
+ { DDRC_PERFLPR1(0), 0x900093e7 },
+ { DDRC_PERFWR1(0), 0x20005574 },
+ { DDRC_PCCFG(0), 0x00000111 },
+ { DDRC_PCFGW_0(0), 0x000072ff },
+ { DDRC_PCFGQOS0_0(0), 0x02100e07 },
+ { DDRC_PCFGQOS1_0(0), 0x00620096 },
+ { DDRC_PCFGWQOS0_0(0), 0x01100e07 },
+ { DDRC_PCFGWQOS1_0(0), 0x00c8012c },
+
+ /* frequency P1&P2 */
+ /* Frequency 1: 400mbps */
+ { DDRC_FREQ1_DRAMTMG0(0), 0x0d0b010c },
+ { DDRC_FREQ1_DRAMTMG1(0), 0x00030410 },
+ { DDRC_FREQ1_DRAMTMG2(0), 0x0203090c },
+ { DDRC_FREQ1_DRAMTMG3(0), 0x00505006 },
+ { DDRC_FREQ1_DRAMTMG4(0), 0x05040305 },
+ { DDRC_FREQ1_DRAMTMG5(0), 0x0d0e0504 },
+ { DDRC_FREQ1_DRAMTMG6(0), 0x0a060004 },
+ { DDRC_FREQ1_DRAMTMG7(0), 0x0000090e },
+ { DDRC_FREQ1_DRAMTMG14(0), 0x00000032 },
+ { DDRC_FREQ1_DRAMTMG15(0), 0x00000000 },
+ { DDRC_FREQ1_DRAMTMG17(0), 0x0036001b },
+ { DDRC_FREQ1_DERATEINT(0), 0x7e9fbeb1 },
+ { DDRC_FREQ1_DFITMG0(0), 0x03818200 },
+ { DDRC_FREQ1_DFITMG2(0), 0x00000000 },
+ { DDRC_FREQ1_RFSHTMG(0), 0x000C001c },
+ { DDRC_FREQ1_INIT3(0), 0x00840000 },
+ { DDRC_FREQ1_INIT4(0), 0x00310000 },
+ { DDRC_FREQ1_INIT6(0), 0x0066004a },
+ { DDRC_FREQ1_INIT7(0), 0x0006004a },
+
+ /* Frequency 2: 100mbps */
+ { DDRC_FREQ2_DRAMTMG0(0), 0x0d0b010c },
+ { DDRC_FREQ2_DRAMTMG1(0), 0x00030410 },
+ { DDRC_FREQ2_DRAMTMG2(0), 0x0203090c },
+ { DDRC_FREQ2_DRAMTMG3(0), 0x00505006 },
+ { DDRC_FREQ2_DRAMTMG4(0), 0x05040305 },
+ { DDRC_FREQ2_DRAMTMG5(0), 0x0d0e0504 },
+ { DDRC_FREQ2_DRAMTMG6(0), 0x0a060004 },
+ { DDRC_FREQ2_DRAMTMG7(0), 0x0000090e },
+ { DDRC_FREQ2_DRAMTMG14(0), 0x00000032 },
+ { DDRC_FREQ2_DRAMTMG17(0), 0x0036001b },
+ { DDRC_FREQ2_DERATEINT(0), 0x7e9fbeb1 },
+ { DDRC_FREQ2_DFITMG0(0), 0x03818200 },
+ { DDRC_FREQ2_DFITMG2(0), 0x00000000 },
+ { DDRC_FREQ2_RFSHTMG(0), 0x0003800c },
+ { DDRC_FREQ2_RFSHTMG(0), 0x00030007 },
+ { DDRC_FREQ2_INIT3(0), 0x00840000 },
+ { DDRC_FREQ2_INIT4(0), 0x00310008 },
+ { DDRC_FREQ2_INIT4(0), (LPDDR4_MR3 << 16) | 0x0000 },
+ { DDRC_FREQ2_INIT6(0), 0x0066004a },
+ { DDRC_FREQ2_INIT7(0), 0x0006004a },
+
+ /* boot start point */
+ { DDRC_MSTR2(0), 0x2 }, //DDRC_MSTR2
+};
+
+/* PHY Initialize Configuration */
+struct dram_cfg_param lpddr4_ddrphy_cfg[] = {
+ { 0x1005f, 0x1ff },
+ { 0x1015f, 0x1ff },
+ { 0x1105f, 0x1ff },
+ { 0x1115f, 0x1ff },
+ { 0x1205f, 0x1ff },
+ { 0x1215f, 0x1ff },
+ { 0x1305f, 0x1ff },
+ { 0x1315f, 0x1ff },
+
+ { 0x11005f, 0x1ff },
+ { 0x11015f, 0x1ff },
+ { 0x11105f, 0x1ff },
+ { 0x11115f, 0x1ff },
+ { 0x11205f, 0x1ff },
+ { 0x11215f, 0x1ff },
+ { 0x11305f, 0x1ff },
+ { 0x11315f, 0x1ff },
+
+ { 0x21005f, 0x1ff },
+ { 0x21015f, 0x1ff },
+ { 0x21105f, 0x1ff },
+ { 0x21115f, 0x1ff },
+ { 0x21205f, 0x1ff },
+ { 0x21215f, 0x1ff },
+ { 0x21305f, 0x1ff },
+ { 0x21315f, 0x1ff },
+
+ { 0x55, 0x1ff },
+ { 0x1055, 0x1ff },
+ { 0x2055, 0x1ff },
+ { 0x3055, 0x1ff },
+ { 0x4055, 0x1ff },
+ { 0x5055, 0x1ff },
+ { 0x6055, 0x1ff },
+ { 0x7055, 0x1ff },
+ { 0x8055, 0x1ff },
+ { 0x9055, 0x1ff },
+
+ { 0x200c5, 0x19 },
+ { 0x1200c5, 0x7 },
+ { 0x2200c5, 0x7 },
+
+ { 0x2002e, 0x2 },
+ { 0x12002e, 0x2 },
+ { 0x22002e, 0x2 },
+
+ { 0x90204, 0x0 },
+ { 0x190204, 0x0 },
+ { 0x290204, 0x0 },
+
+ { 0x20024, 0xab },
+ { 0x2003a, 0x0 },
+
+ { 0x120024, 0xab },
+ { 0x2003a, 0x0 },
+
+ { 0x220024, 0xab },
+ { 0x2003a, 0x0 },
+
+ { 0x20056, 0x3 },
+ { 0x120056, 0xa },
+ { 0x220056, 0xa },
+
+ { 0x1004d, 0xe00 },
+ { 0x1014d, 0xe00 },
+ { 0x1104d, 0xe00 },
+ { 0x1114d, 0xe00 },
+ { 0x1204d, 0xe00 },
+ { 0x1214d, 0xe00 },
+ { 0x1304d, 0xe00 },
+ { 0x1314d, 0xe00 },
+
+ { 0x11004d, 0xe00 },
+ { 0x11014d, 0xe00 },
+ { 0x11104d, 0xe00 },
+ { 0x11114d, 0xe00 },
+ { 0x11204d, 0xe00 },
+ { 0x11214d, 0xe00 },
+ { 0x11304d, 0xe00 },
+ { 0x11314d, 0xe00 },
+
+ { 0x21004d, 0xe00 },
+ { 0x21014d, 0xe00 },
+ { 0x21104d, 0xe00 },
+ { 0x21114d, 0xe00 },
+ { 0x21204d, 0xe00 },
+ { 0x21214d, 0xe00 },
+ { 0x21304d, 0xe00 },
+ { 0x21314d, 0xe00 },
+
+ { 0x10049, 0xfbe },
+ { 0x10149, 0xfbe },
+ { 0x11049, 0xfbe },
+ { 0x11149, 0xfbe },
+ { 0x12049, 0xfbe },
+ { 0x12149, 0xfbe },
+ { 0x13049, 0xfbe },
+ { 0x13149, 0xfbe },
+
+ { 0x110049, 0xfbe },
+ { 0x110149, 0xfbe },
+ { 0x111049, 0xfbe },
+ { 0x111149, 0xfbe },
+ { 0x112049, 0xfbe },
+ { 0x112149, 0xfbe },
+ { 0x113049, 0xfbe },
+ { 0x113149, 0xfbe },
+
+ { 0x210049, 0xfbe },
+ { 0x210149, 0xfbe },
+ { 0x211049, 0xfbe },
+ { 0x211149, 0xfbe },
+ { 0x212049, 0xfbe },
+ { 0x212149, 0xfbe },
+ { 0x213049, 0xfbe },
+ { 0x213149, 0xfbe },
+
+ { 0x43, 0x63 },
+ { 0x1043, 0x63 },
+ { 0x2043, 0x63 },
+ { 0x3043, 0x63 },
+ { 0x4043, 0x63 },
+ { 0x5043, 0x63 },
+ { 0x6043, 0x63 },
+ { 0x7043, 0x63 },
+ { 0x8043, 0x63 },
+ { 0x9043, 0x63 },
+
+ { 0x20018, 0x3 },
+ { 0x20075, 0x4 },
+ { 0x20050, 0x0 },
+ { 0x20008, 0x2ee },
+ { 0x120008, 0x64 },
+ { 0x220008, 0x19 },
+ { 0x20088, 0x9 },
+
+ { 0x200b2, 0x1d4 },
+ { 0x10043, 0x5a1 },
+ { 0x10143, 0x5a1 },
+ { 0x11043, 0x5a1 },
+ { 0x11143, 0x5a1 },
+ { 0x12043, 0x5a1 },
+ { 0x12143, 0x5a1 },
+ { 0x13043, 0x5a1 },
+ { 0x13143, 0x5a1 },
+
+ { 0x1200b2, 0xdc },
+ { 0x110043, 0x5a1 },
+ { 0x110143, 0x5a1 },
+ { 0x111043, 0x5a1 },
+ { 0x111143, 0x5a1 },
+ { 0x112043, 0x5a1 },
+ { 0x112143, 0x5a1 },
+ { 0x113043, 0x5a1 },
+ { 0x113143, 0x5a1 },
+
+ { 0x2200b2, 0xdc },
+ { 0x210043, 0x5a1 },
+ { 0x210143, 0x5a1 },
+ { 0x211043, 0x5a1 },
+ { 0x211143, 0x5a1 },
+ { 0x212043, 0x5a1 },
+ { 0x212143, 0x5a1 },
+ { 0x213043, 0x5a1 },
+ { 0x213143, 0x5a1 },
+
+ { 0x200fa, 0x1 },
+ { 0x1200fa, 0x1 },
+ { 0x2200fa, 0x1 },
+
+ { 0x20019, 0x1 },
+ { 0x120019, 0x1 },
+ { 0x220019, 0x1 },
+
+ { 0x200f0, 0x660 },
+ { 0x200f1, 0x0 },
+ { 0x200f2, 0x4444 },
+ { 0x200f3, 0x8888 },
+ { 0x200f4, 0x5665 },
+ { 0x200f5, 0x0 },
+ { 0x200f6, 0x0 },
+ { 0x200f7, 0xf000 },
+
+ { 0x20025, 0x0 },
+ { 0x2002d, LPDDR4_PHY_DMIPinPresent },
+ { 0x12002d, LPDDR4_PHY_DMIPinPresent },
+ { 0x22002d, LPDDR4_PHY_DMIPinPresent },
+ { 0x200c7, 0x21 },
+ { 0x200ca, 0x24 },
+ { 0x1200c7, 0x21 },
+ { 0x1200ca, 0x24 },
+ { 0x2200c7, 0x21 },
+ { 0x2200ca, 0x24 },
+};
+
+/* ddr phy trained csr */
+struct dram_cfg_param lpddr4_ddrphy_trained_csr[] = {
+ { 0x200b2, 0x0 },
+ { 0x1200b2, 0x0 },
+ { 0x2200b2, 0x0 },
+ { 0x200cb, 0x0 },
+ { 0x10043, 0x0 },
+ { 0x110043, 0x0 },
+ { 0x210043, 0x0 },
+ { 0x10143, 0x0 },
+ { 0x110143, 0x0 },
+ { 0x210143, 0x0 },
+ { 0x11043, 0x0 },
+ { 0x111043, 0x0 },
+ { 0x211043, 0x0 },
+ { 0x11143, 0x0 },
+ { 0x111143, 0x0 },
+ { 0x211143, 0x0 },
+ { 0x12043, 0x0 },
+ { 0x112043, 0x0 },
+ { 0x212043, 0x0 },
+ { 0x12143, 0x0 },
+ { 0x112143, 0x0 },
+ { 0x212143, 0x0 },
+ { 0x13043, 0x0 },
+ { 0x113043, 0x0 },
+ { 0x213043, 0x0 },
+ { 0x13143, 0x0 },
+ { 0x113143, 0x0 },
+ { 0x213143, 0x0 },
+ { 0x80, 0x0 },
+ { 0x100080, 0x0 },
+ { 0x200080, 0x0 },
+ { 0x1080, 0x0 },
+ { 0x101080, 0x0 },
+ { 0x201080, 0x0 },
+ { 0x2080, 0x0 },
+ { 0x102080, 0x0 },
+ { 0x202080, 0x0 },
+ { 0x3080, 0x0 },
+ { 0x103080, 0x0 },
+ { 0x203080, 0x0 },
+ { 0x4080, 0x0 },
+ { 0x104080, 0x0 },
+ { 0x204080, 0x0 },
+ { 0x5080, 0x0 },
+ { 0x105080, 0x0 },
+ { 0x205080, 0x0 },
+ { 0x6080, 0x0 },
+ { 0x106080, 0x0 },
+ { 0x206080, 0x0 },
+ { 0x7080, 0x0 },
+ { 0x107080, 0x0 },
+ { 0x207080, 0x0 },
+ { 0x8080, 0x0 },
+ { 0x108080, 0x0 },
+ { 0x208080, 0x0 },
+ { 0x9080, 0x0 },
+ { 0x109080, 0x0 },
+ { 0x209080, 0x0 },
+ { 0x10080, 0x0 },
+ { 0x110080, 0x0 },
+ { 0x210080, 0x0 },
+ { 0x10180, 0x0 },
+ { 0x110180, 0x0 },
+ { 0x210180, 0x0 },
+ { 0x11080, 0x0 },
+ { 0x111080, 0x0 },
+ { 0x211080, 0x0 },
+ { 0x11180, 0x0 },
+ { 0x111180, 0x0 },
+ { 0x211180, 0x0 },
+ { 0x12080, 0x0 },
+ { 0x112080, 0x0 },
+ { 0x212080, 0x0 },
+ { 0x12180, 0x0 },
+ { 0x112180, 0x0 },
+ { 0x212180, 0x0 },
+ { 0x13080, 0x0 },
+ { 0x113080, 0x0 },
+ { 0x213080, 0x0 },
+ { 0x13180, 0x0 },
+ { 0x113180, 0x0 },
+ { 0x213180, 0x0 },
+ { 0x10081, 0x0 },
+ { 0x110081, 0x0 },
+ { 0x210081, 0x0 },
+ { 0x10181, 0x0 },
+ { 0x110181, 0x0 },
+ { 0x210181, 0x0 },
+ { 0x11081, 0x0 },
+ { 0x111081, 0x0 },
+ { 0x211081, 0x0 },
+ { 0x11181, 0x0 },
+ { 0x111181, 0x0 },
+ { 0x211181, 0x0 },
+ { 0x12081, 0x0 },
+ { 0x112081, 0x0 },
+ { 0x212081, 0x0 },
+ { 0x12181, 0x0 },
+ { 0x112181, 0x0 },
+ { 0x212181, 0x0 },
+ { 0x13081, 0x0 },
+ { 0x113081, 0x0 },
+ { 0x213081, 0x0 },
+ { 0x13181, 0x0 },
+ { 0x113181, 0x0 },
+ { 0x213181, 0x0 },
+ { 0x100d0, 0x0 },
+ { 0x1100d0, 0x0 },
+ { 0x2100d0, 0x0 },
+ { 0x101d0, 0x0 },
+ { 0x1101d0, 0x0 },
+ { 0x2101d0, 0x0 },
+ { 0x110d0, 0x0 },
+ { 0x1110d0, 0x0 },
+ { 0x2110d0, 0x0 },
+ { 0x111d0, 0x0 },
+ { 0x1111d0, 0x0 },
+ { 0x2111d0, 0x0 },
+ { 0x120d0, 0x0 },
+ { 0x1120d0, 0x0 },
+ { 0x2120d0, 0x0 },
+ { 0x121d0, 0x0 },
+ { 0x1121d0, 0x0 },
+ { 0x2121d0, 0x0 },
+ { 0x130d0, 0x0 },
+ { 0x1130d0, 0x0 },
+ { 0x2130d0, 0x0 },
+ { 0x131d0, 0x0 },
+ { 0x1131d0, 0x0 },
+ { 0x2131d0, 0x0 },
+ { 0x100d1, 0x0 },
+ { 0x1100d1, 0x0 },
+ { 0x2100d1, 0x0 },
+ { 0x101d1, 0x0 },
+ { 0x1101d1, 0x0 },
+ { 0x2101d1, 0x0 },
+ { 0x110d1, 0x0 },
+ { 0x1110d1, 0x0 },
+ { 0x2110d1, 0x0 },
+ { 0x111d1, 0x0 },
+ { 0x1111d1, 0x0 },
+ { 0x2111d1, 0x0 },
+ { 0x120d1, 0x0 },
+ { 0x1120d1, 0x0 },
+ { 0x2120d1, 0x0 },
+ { 0x121d1, 0x0 },
+ { 0x1121d1, 0x0 },
+ { 0x2121d1, 0x0 },
+ { 0x130d1, 0x0 },
+ { 0x1130d1, 0x0 },
+ { 0x2130d1, 0x0 },
+ { 0x131d1, 0x0 },
+ { 0x1131d1, 0x0 },
+ { 0x2131d1, 0x0 },
+ { 0x10068, 0x0 },
+ { 0x10168, 0x0 },
+ { 0x10268, 0x0 },
+ { 0x10368, 0x0 },
+ { 0x10468, 0x0 },
+ { 0x10568, 0x0 },
+ { 0x10668, 0x0 },
+ { 0x10768, 0x0 },
+ { 0x10868, 0x0 },
+ { 0x11068, 0x0 },
+ { 0x11168, 0x0 },
+ { 0x11268, 0x0 },
+ { 0x11368, 0x0 },
+ { 0x11468, 0x0 },
+ { 0x11568, 0x0 },
+ { 0x11668, 0x0 },
+ { 0x11768, 0x0 },
+ { 0x11868, 0x0 },
+ { 0x12068, 0x0 },
+ { 0x12168, 0x0 },
+ { 0x12268, 0x0 },
+ { 0x12368, 0x0 },
+ { 0x12468, 0x0 },
+ { 0x12568, 0x0 },
+ { 0x12668, 0x0 },
+ { 0x12768, 0x0 },
+ { 0x12868, 0x0 },
+ { 0x13068, 0x0 },
+ { 0x13168, 0x0 },
+ { 0x13268, 0x0 },
+ { 0x13368, 0x0 },
+ { 0x13468, 0x0 },
+ { 0x13568, 0x0 },
+ { 0x13668, 0x0 },
+ { 0x13768, 0x0 },
+ { 0x13868, 0x0 },
+ { 0x10069, 0x0 },
+ { 0x10169, 0x0 },
+ { 0x10269, 0x0 },
+ { 0x10369, 0x0 },
+ { 0x10469, 0x0 },
+ { 0x10569, 0x0 },
+ { 0x10669, 0x0 },
+ { 0x10769, 0x0 },
+ { 0x10869, 0x0 },
+ { 0x11069, 0x0 },
+ { 0x11169, 0x0 },
+ { 0x11269, 0x0 },
+ { 0x11369, 0x0 },
+ { 0x11469, 0x0 },
+ { 0x11569, 0x0 },
+ { 0x11669, 0x0 },
+ { 0x11769, 0x0 },
+ { 0x11869, 0x0 },
+ { 0x12069, 0x0 },
+ { 0x12169, 0x0 },
+ { 0x12269, 0x0 },
+ { 0x12369, 0x0 },
+ { 0x12469, 0x0 },
+ { 0x12569, 0x0 },
+ { 0x12669, 0x0 },
+ { 0x12769, 0x0 },
+ { 0x12869, 0x0 },
+ { 0x13069, 0x0 },
+ { 0x13169, 0x0 },
+ { 0x13269, 0x0 },
+ { 0x13369, 0x0 },
+ { 0x13469, 0x0 },
+ { 0x13569, 0x0 },
+ { 0x13669, 0x0 },
+ { 0x13769, 0x0 },
+ { 0x13869, 0x0 },
+ { 0x1008c, 0x0 },
+ { 0x11008c, 0x0 },
+ { 0x21008c, 0x0 },
+ { 0x1018c, 0x0 },
+ { 0x11018c, 0x0 },
+ { 0x21018c, 0x0 },
+ { 0x1108c, 0x0 },
+ { 0x11108c, 0x0 },
+ { 0x21108c, 0x0 },
+ { 0x1118c, 0x0 },
+ { 0x11118c, 0x0 },
+ { 0x21118c, 0x0 },
+ { 0x1208c, 0x0 },
+ { 0x11208c, 0x0 },
+ { 0x21208c, 0x0 },
+ { 0x1218c, 0x0 },
+ { 0x11218c, 0x0 },
+ { 0x21218c, 0x0 },
+ { 0x1308c, 0x0 },
+ { 0x11308c, 0x0 },
+ { 0x21308c, 0x0 },
+ { 0x1318c, 0x0 },
+ { 0x11318c, 0x0 },
+ { 0x21318c, 0x0 },
+ { 0x1008d, 0x0 },
+ { 0x11008d, 0x0 },
+ { 0x21008d, 0x0 },
+ { 0x1018d, 0x0 },
+ { 0x11018d, 0x0 },
+ { 0x21018d, 0x0 },
+ { 0x1108d, 0x0 },
+ { 0x11108d, 0x0 },
+ { 0x21108d, 0x0 },
+ { 0x1118d, 0x0 },
+ { 0x11118d, 0x0 },
+ { 0x21118d, 0x0 },
+ { 0x1208d, 0x0 },
+ { 0x11208d, 0x0 },
+ { 0x21208d, 0x0 },
+ { 0x1218d, 0x0 },
+ { 0x11218d, 0x0 },
+ { 0x21218d, 0x0 },
+ { 0x1308d, 0x0 },
+ { 0x11308d, 0x0 },
+ { 0x21308d, 0x0 },
+ { 0x1318d, 0x0 },
+ { 0x11318d, 0x0 },
+ { 0x21318d, 0x0 },
+ { 0x100c0, 0x0 },
+ { 0x1100c0, 0x0 },
+ { 0x2100c0, 0x0 },
+ { 0x101c0, 0x0 },
+ { 0x1101c0, 0x0 },
+ { 0x2101c0, 0x0 },
+ { 0x102c0, 0x0 },
+ { 0x1102c0, 0x0 },
+ { 0x2102c0, 0x0 },
+ { 0x103c0, 0x0 },
+ { 0x1103c0, 0x0 },
+ { 0x2103c0, 0x0 },
+ { 0x104c0, 0x0 },
+ { 0x1104c0, 0x0 },
+ { 0x2104c0, 0x0 },
+ { 0x105c0, 0x0 },
+ { 0x1105c0, 0x0 },
+ { 0x2105c0, 0x0 },
+ { 0x106c0, 0x0 },
+ { 0x1106c0, 0x0 },
+ { 0x2106c0, 0x0 },
+ { 0x107c0, 0x0 },
+ { 0x1107c0, 0x0 },
+ { 0x2107c0, 0x0 },
+ { 0x108c0, 0x0 },
+ { 0x1108c0, 0x0 },
+ { 0x2108c0, 0x0 },
+ { 0x110c0, 0x0 },
+ { 0x1110c0, 0x0 },
+ { 0x2110c0, 0x0 },
+ { 0x111c0, 0x0 },
+ { 0x1111c0, 0x0 },
+ { 0x2111c0, 0x0 },
+ { 0x112c0, 0x0 },
+ { 0x1112c0, 0x0 },
+ { 0x2112c0, 0x0 },
+ { 0x113c0, 0x0 },
+ { 0x1113c0, 0x0 },
+ { 0x2113c0, 0x0 },
+ { 0x114c0, 0x0 },
+ { 0x1114c0, 0x0 },
+ { 0x2114c0, 0x0 },
+ { 0x115c0, 0x0 },
+ { 0x1115c0, 0x0 },
+ { 0x2115c0, 0x0 },
+ { 0x116c0, 0x0 },
+ { 0x1116c0, 0x0 },
+ { 0x2116c0, 0x0 },
+ { 0x117c0, 0x0 },
+ { 0x1117c0, 0x0 },
+ { 0x2117c0, 0x0 },
+ { 0x118c0, 0x0 },
+ { 0x1118c0, 0x0 },
+ { 0x2118c0, 0x0 },
+ { 0x120c0, 0x0 },
+ { 0x1120c0, 0x0 },
+ { 0x2120c0, 0x0 },
+ { 0x121c0, 0x0 },
+ { 0x1121c0, 0x0 },
+ { 0x2121c0, 0x0 },
+ { 0x122c0, 0x0 },
+ { 0x1122c0, 0x0 },
+ { 0x2122c0, 0x0 },
+ { 0x123c0, 0x0 },
+ { 0x1123c0, 0x0 },
+ { 0x2123c0, 0x0 },
+ { 0x124c0, 0x0 },
+ { 0x1124c0, 0x0 },
+ { 0x2124c0, 0x0 },
+ { 0x125c0, 0x0 },
+ { 0x1125c0, 0x0 },
+ { 0x2125c0, 0x0 },
+ { 0x126c0, 0x0 },
+ { 0x1126c0, 0x0 },
+ { 0x2126c0, 0x0 },
+ { 0x127c0, 0x0 },
+ { 0x1127c0, 0x0 },
+ { 0x2127c0, 0x0 },
+ { 0x128c0, 0x0 },
+ { 0x1128c0, 0x0 },
+ { 0x2128c0, 0x0 },
+ { 0x130c0, 0x0 },
+ { 0x1130c0, 0x0 },
+ { 0x2130c0, 0x0 },
+ { 0x131c0, 0x0 },
+ { 0x1131c0, 0x0 },
+ { 0x2131c0, 0x0 },
+ { 0x132c0, 0x0 },
+ { 0x1132c0, 0x0 },
+ { 0x2132c0, 0x0 },
+ { 0x133c0, 0x0 },
+ { 0x1133c0, 0x0 },
+ { 0x2133c0, 0x0 },
+ { 0x134c0, 0x0 },
+ { 0x1134c0, 0x0 },
+ { 0x2134c0, 0x0 },
+ { 0x135c0, 0x0 },
+ { 0x1135c0, 0x0 },
+ { 0x2135c0, 0x0 },
+ { 0x136c0, 0x0 },
+ { 0x1136c0, 0x0 },
+ { 0x2136c0, 0x0 },
+ { 0x137c0, 0x0 },
+ { 0x1137c0, 0x0 },
+ { 0x2137c0, 0x0 },
+ { 0x138c0, 0x0 },
+ { 0x1138c0, 0x0 },
+ { 0x2138c0, 0x0 },
+ { 0x100c1, 0x0 },
+ { 0x1100c1, 0x0 },
+ { 0x2100c1, 0x0 },
+ { 0x101c1, 0x0 },
+ { 0x1101c1, 0x0 },
+ { 0x2101c1, 0x0 },
+ { 0x102c1, 0x0 },
+ { 0x1102c1, 0x0 },
+ { 0x2102c1, 0x0 },
+ { 0x103c1, 0x0 },
+ { 0x1103c1, 0x0 },
+ { 0x2103c1, 0x0 },
+ { 0x104c1, 0x0 },
+ { 0x1104c1, 0x0 },
+ { 0x2104c1, 0x0 },
+ { 0x105c1, 0x0 },
+ { 0x1105c1, 0x0 },
+ { 0x2105c1, 0x0 },
+ { 0x106c1, 0x0 },
+ { 0x1106c1, 0x0 },
+ { 0x2106c1, 0x0 },
+ { 0x107c1, 0x0 },
+ { 0x1107c1, 0x0 },
+ { 0x2107c1, 0x0 },
+ { 0x108c1, 0x0 },
+ { 0x1108c1, 0x0 },
+ { 0x2108c1, 0x0 },
+ { 0x110c1, 0x0 },
+ { 0x1110c1, 0x0 },
+ { 0x2110c1, 0x0 },
+ { 0x111c1, 0x0 },
+ { 0x1111c1, 0x0 },
+ { 0x2111c1, 0x0 },
+ { 0x112c1, 0x0 },
+ { 0x1112c1, 0x0 },
+ { 0x2112c1, 0x0 },
+ { 0x113c1, 0x0 },
+ { 0x1113c1, 0x0 },
+ { 0x2113c1, 0x0 },
+ { 0x114c1, 0x0 },
+ { 0x1114c1, 0x0 },
+ { 0x2114c1, 0x0 },
+ { 0x115c1, 0x0 },
+ { 0x1115c1, 0x0 },
+ { 0x2115c1, 0x0 },
+ { 0x116c1, 0x0 },
+ { 0x1116c1, 0x0 },
+ { 0x2116c1, 0x0 },
+ { 0x117c1, 0x0 },
+ { 0x1117c1, 0x0 },
+ { 0x2117c1, 0x0 },
+ { 0x118c1, 0x0 },
+ { 0x1118c1, 0x0 },
+ { 0x2118c1, 0x0 },
+ { 0x120c1, 0x0 },
+ { 0x1120c1, 0x0 },
+ { 0x2120c1, 0x0 },
+ { 0x121c1, 0x0 },
+ { 0x1121c1, 0x0 },
+ { 0x2121c1, 0x0 },
+ { 0x122c1, 0x0 },
+ { 0x1122c1, 0x0 },
+ { 0x2122c1, 0x0 },
+ { 0x123c1, 0x0 },
+ { 0x1123c1, 0x0 },
+ { 0x2123c1, 0x0 },
+ { 0x124c1, 0x0 },
+ { 0x1124c1, 0x0 },
+ { 0x2124c1, 0x0 },
+ { 0x125c1, 0x0 },
+ { 0x1125c1, 0x0 },
+ { 0x2125c1, 0x0 },
+ { 0x126c1, 0x0 },
+ { 0x1126c1, 0x0 },
+ { 0x2126c1, 0x0 },
+ { 0x127c1, 0x0 },
+ { 0x1127c1, 0x0 },
+ { 0x2127c1, 0x0 },
+ { 0x128c1, 0x0 },
+ { 0x1128c1, 0x0 },
+ { 0x2128c1, 0x0 },
+ { 0x130c1, 0x0 },
+ { 0x1130c1, 0x0 },
+ { 0x2130c1, 0x0 },
+ { 0x131c1, 0x0 },
+ { 0x1131c1, 0x0 },
+ { 0x2131c1, 0x0 },
+ { 0x132c1, 0x0 },
+ { 0x1132c1, 0x0 },
+ { 0x2132c1, 0x0 },
+ { 0x133c1, 0x0 },
+ { 0x1133c1, 0x0 },
+ { 0x2133c1, 0x0 },
+ { 0x134c1, 0x0 },
+ { 0x1134c1, 0x0 },
+ { 0x2134c1, 0x0 },
+ { 0x135c1, 0x0 },
+ { 0x1135c1, 0x0 },
+ { 0x2135c1, 0x0 },
+ { 0x136c1, 0x0 },
+ { 0x1136c1, 0x0 },
+ { 0x2136c1, 0x0 },
+ { 0x137c1, 0x0 },
+ { 0x1137c1, 0x0 },
+ { 0x2137c1, 0x0 },
+ { 0x138c1, 0x0 },
+ { 0x1138c1, 0x0 },
+ { 0x2138c1, 0x0 },
+ { 0x10020, 0x0 },
+ { 0x110020, 0x0 },
+ { 0x210020, 0x0 },
+ { 0x11020, 0x0 },
+ { 0x111020, 0x0 },
+ { 0x211020, 0x0 },
+ { 0x12020, 0x0 },
+ { 0x112020, 0x0 },
+ { 0x212020, 0x0 },
+ { 0x13020, 0x0 },
+ { 0x113020, 0x0 },
+ { 0x213020, 0x0 },
+ { 0x20072, 0x0 },
+ { 0x20073, 0x0 },
+ { 0x20074, 0x0 },
+ { 0x100aa, 0x0 },
+ { 0x110aa, 0x0 },
+ { 0x120aa, 0x0 },
+ { 0x130aa, 0x0 },
+ { 0x20010, 0x0 },
+ { 0x120010, 0x0 },
+ { 0x220010, 0x0 },
+ { 0x20011, 0x0 },
+ { 0x120011, 0x0 },
+ { 0x220011, 0x0 },
+ { 0x100ae, 0x0 },
+ { 0x1100ae, 0x0 },
+ { 0x2100ae, 0x0 },
+ { 0x100af, 0x0 },
+ { 0x1100af, 0x0 },
+ { 0x2100af, 0x0 },
+ { 0x110ae, 0x0 },
+ { 0x1110ae, 0x0 },
+ { 0x2110ae, 0x0 },
+ { 0x110af, 0x0 },
+ { 0x1110af, 0x0 },
+ { 0x2110af, 0x0 },
+ { 0x120ae, 0x0 },
+ { 0x1120ae, 0x0 },
+ { 0x2120ae, 0x0 },
+ { 0x120af, 0x0 },
+ { 0x1120af, 0x0 },
+ { 0x2120af, 0x0 },
+ { 0x130ae, 0x0 },
+ { 0x1130ae, 0x0 },
+ { 0x2130ae, 0x0 },
+ { 0x130af, 0x0 },
+ { 0x1130af, 0x0 },
+ { 0x2130af, 0x0 },
+ { 0x20020, 0x0 },
+ { 0x120020, 0x0 },
+ { 0x220020, 0x0 },
+ { 0x100a0, 0x0 },
+ { 0x100a1, 0x0 },
+ { 0x100a2, 0x0 },
+ { 0x100a3, 0x0 },
+ { 0x100a4, 0x0 },
+ { 0x100a5, 0x0 },
+ { 0x100a6, 0x0 },
+ { 0x100a7, 0x0 },
+ { 0x110a0, 0x0 },
+ { 0x110a1, 0x0 },
+ { 0x110a2, 0x0 },
+ { 0x110a3, 0x0 },
+ { 0x110a4, 0x0 },
+ { 0x110a5, 0x0 },
+ { 0x110a6, 0x0 },
+ { 0x110a7, 0x0 },
+ { 0x120a0, 0x0 },
+ { 0x120a1, 0x0 },
+ { 0x120a2, 0x0 },
+ { 0x120a3, 0x0 },
+ { 0x120a4, 0x0 },
+ { 0x120a5, 0x0 },
+ { 0x120a6, 0x0 },
+ { 0x120a7, 0x0 },
+ { 0x130a0, 0x0 },
+ { 0x130a1, 0x0 },
+ { 0x130a2, 0x0 },
+ { 0x130a3, 0x0 },
+ { 0x130a4, 0x0 },
+ { 0x130a5, 0x0 },
+ { 0x130a6, 0x0 },
+ { 0x130a7, 0x0 },
+ { 0x2007c, 0x0 },
+ { 0x12007c, 0x0 },
+ { 0x22007c, 0x0 },
+ { 0x2007d, 0x0 },
+ { 0x12007d, 0x0 },
+ { 0x22007d, 0x0 },
+ { 0x400fd, 0x0 },
+ { 0x400c0, 0x0 },
+ { 0x90201, 0x0 },
+ { 0x190201, 0x0 },
+ { 0x290201, 0x0 },
+ { 0x90202, 0x0 },
+ { 0x190202, 0x0 },
+ { 0x290202, 0x0 },
+ { 0x90203, 0x0 },
+ { 0x190203, 0x0 },
+ { 0x290203, 0x0 },
+ { 0x90204, 0x0 },
+ { 0x190204, 0x0 },
+ { 0x290204, 0x0 },
+ { 0x90205, 0x0 },
+ { 0x190205, 0x0 },
+ { 0x290205, 0x0 },
+ { 0x90206, 0x0 },
+ { 0x190206, 0x0 },
+ { 0x290206, 0x0 },
+ { 0x90207, 0x0 },
+ { 0x190207, 0x0 },
+ { 0x290207, 0x0 },
+ { 0x90208, 0x0 },
+ { 0x190208, 0x0 },
+ { 0x290208, 0x0 },
+ { 0x10062, 0x0 },
+ { 0x10162, 0x0 },
+ { 0x10262, 0x0 },
+ { 0x10362, 0x0 },
+ { 0x10462, 0x0 },
+ { 0x10562, 0x0 },
+ { 0x10662, 0x0 },
+ { 0x10762, 0x0 },
+ { 0x10862, 0x0 },
+ { 0x11062, 0x0 },
+ { 0x11162, 0x0 },
+ { 0x11262, 0x0 },
+ { 0x11362, 0x0 },
+ { 0x11462, 0x0 },
+ { 0x11562, 0x0 },
+ { 0x11662, 0x0 },
+ { 0x11762, 0x0 },
+ { 0x11862, 0x0 },
+ { 0x12062, 0x0 },
+ { 0x12162, 0x0 },
+ { 0x12262, 0x0 },
+ { 0x12362, 0x0 },
+ { 0x12462, 0x0 },
+ { 0x12562, 0x0 },
+ { 0x12662, 0x0 },
+ { 0x12762, 0x0 },
+ { 0x12862, 0x0 },
+ { 0x13062, 0x0 },
+ { 0x13162, 0x0 },
+ { 0x13262, 0x0 },
+ { 0x13362, 0x0 },
+ { 0x13462, 0x0 },
+ { 0x13562, 0x0 },
+ { 0x13662, 0x0 },
+ { 0x13762, 0x0 },
+ { 0x13862, 0x0 },
+ { 0x20077, 0x0 },
+ { 0x10001, 0x0 },
+ { 0x11001, 0x0 },
+ { 0x12001, 0x0 },
+ { 0x13001, 0x0 },
+ { 0x10040, 0x0 },
+ { 0x10140, 0x0 },
+ { 0x10240, 0x0 },
+ { 0x10340, 0x0 },
+ { 0x10440, 0x0 },
+ { 0x10540, 0x0 },
+ { 0x10640, 0x0 },
+ { 0x10740, 0x0 },
+ { 0x10840, 0x0 },
+ { 0x10030, 0x0 },
+ { 0x10130, 0x0 },
+ { 0x10230, 0x0 },
+ { 0x10330, 0x0 },
+ { 0x10430, 0x0 },
+ { 0x10530, 0x0 },
+ { 0x10630, 0x0 },
+ { 0x10730, 0x0 },
+ { 0x10830, 0x0 },
+ { 0x11040, 0x0 },
+ { 0x11140, 0x0 },
+ { 0x11240, 0x0 },
+ { 0x11340, 0x0 },
+ { 0x11440, 0x0 },
+ { 0x11540, 0x0 },
+ { 0x11640, 0x0 },
+ { 0x11740, 0x0 },
+ { 0x11840, 0x0 },
+ { 0x11030, 0x0 },
+ { 0x11130, 0x0 },
+ { 0x11230, 0x0 },
+ { 0x11330, 0x0 },
+ { 0x11430, 0x0 },
+ { 0x11530, 0x0 },
+ { 0x11630, 0x0 },
+ { 0x11730, 0x0 },
+ { 0x11830, 0x0 },
+ { 0x12040, 0x0 },
+ { 0x12140, 0x0 },
+ { 0x12240, 0x0 },
+ { 0x12340, 0x0 },
+ { 0x12440, 0x0 },
+ { 0x12540, 0x0 },
+ { 0x12640, 0x0 },
+ { 0x12740, 0x0 },
+ { 0x12840, 0x0 },
+ { 0x12030, 0x0 },
+ { 0x12130, 0x0 },
+ { 0x12230, 0x0 },
+ { 0x12330, 0x0 },
+ { 0x12430, 0x0 },
+ { 0x12530, 0x0 },
+ { 0x12630, 0x0 },
+ { 0x12730, 0x0 },
+ { 0x12830, 0x0 },
+ { 0x13040, 0x0 },
+ { 0x13140, 0x0 },
+ { 0x13240, 0x0 },
+ { 0x13340, 0x0 },
+ { 0x13440, 0x0 },
+ { 0x13540, 0x0 },
+ { 0x13640, 0x0 },
+ { 0x13740, 0x0 },
+ { 0x13840, 0x0 },
+ { 0x13030, 0x0 },
+ { 0x13130, 0x0 },
+ { 0x13230, 0x0 },
+ { 0x13330, 0x0 },
+ { 0x13430, 0x0 },
+ { 0x13530, 0x0 },
+ { 0x13630, 0x0 },
+ { 0x13730, 0x0 },
+ { 0x13830, 0x0 },
+};
+
+/* P0 message block paremeter for training firmware */
+struct dram_cfg_param lpddr4_fsp0_cfg[] = {
+ { 0xd0000, 0x0 },
+ { 0x54000, 0x0 },
+ { 0x54001, 0x0 },
+ { 0x54002, 0x0 },
+ { 0x54003, 0xbb8 },
+ { 0x54004, 0x2 },
+ { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },//PHY Ron/Rtt
+ { 0x54006, LPDDR4_PHY_VREF_VALUE },
+ { 0x54007, 0x0 },
+ { 0x54008, 0x131f },
+ { 0x54009, 0xc8 },
+ { 0x5400a, 0x0 },
+ { 0x5400b, 0x2 },
+ { 0x5400c, 0x0 },
+ { 0x5400d, 0x0 },
+ { 0x5400e, 0x0 },
+ { 0x5400f, 0x0 },
+ { 0x54010, 0x0 },
+ { 0x54011, 0x0 },
+ { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) },
+ { 0x54013, 0x0 },
+ { 0x54014, 0x0 },
+ { 0x54015, 0x0 },
+ { 0x54016, 0x0 },
+ { 0x54017, 0x0 },
+ { 0x54018, 0x0 },
+ { 0x54019, 0x2dd4 },
+ { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 },
+ { 0x5401b, 0x4d66 },
+ { 0x5401c, 0x4d08 },
+ { 0x5401d, 0x0 },
+ { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ },
+ { 0x5401f, 0x2dd4 },
+ { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 },
+ { 0x54021, 0x4d66 },
+ { 0x54022, 0x4d08 },
+ { 0x54023, 0x0 },
+ { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ },
+ { 0x54025, 0x0 },
+ { 0x54026, 0x0 },
+ { 0x54027, 0x0 },
+ { 0x54028, 0x0 },
+ { 0x54029, 0x0 },
+ { 0x5402a, 0x0 },
+ { 0x5402b, 0x1000 },
+ { 0x5402c, LPDDR4_CS },
+ { 0x5402d, 0x0 },
+ { 0x5402e, 0x0 },
+ { 0x5402f, 0x0 },
+ { 0x54030, 0x0 },
+ { 0x54031, 0x0 },
+ { 0x54032, 0xd400 },
+ { 0x54033, (LPDDR4_MR3 << 8) | (0x312d & 0xff) },
+ { 0x54034, 0x6600 },
+ { 0x54035, 0x84d },
+ { 0x54036, 0x4d },
+ { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ },
+ { 0x54038, 0xd400 },
+ { 0x54039, (LPDDR4_MR3 << 8) | (0x312d & 0xff) },
+ { 0x5403a, 0x6600 },
+ { 0x5403b, 0x84d },
+ { 0x5403c, 0x4d },
+ { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ },
+ { 0x5403e, 0x0 },
+ { 0x5403f, 0x0 },
+ { 0x54040, 0x0 },
+ { 0x54041, 0x0 },
+ { 0x54042, 0x0 },
+ { 0x54043, 0x0 },
+ { 0x54044, 0x0 },
+ { 0xd0000, 0x1 },
+};
+
+/* P1 message block paremeter for training firmware */
+struct dram_cfg_param lpddr4_fsp1_cfg[] = {
+ { 0xd0000, 0x0 },
+ { 0x54000, 0x0 },
+ { 0x54001, 0x0 },
+ { 0x54002, 0x101 },
+ { 0x54003, 0x190 },
+ { 0x54004, 0x2 },
+ { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },/* PHY Ron/Rtt */
+ { 0x54006, LPDDR4_PHY_VREF_VALUE },
+ { 0x54007, 0x0 },
+ { 0x54008, 0x121f },
+ { 0x54009, 0xc8 },
+ { 0x5400a, 0x0 },
+ { 0x5400b, 0x2 },
+ { 0x5400c, 0x0 },
+ { 0x5400d, 0x0 },
+ { 0x5400e, 0x0 },
+ { 0x5400f, 0x0 },
+ { 0x54010, 0x0 },
+ { 0x54011, 0x0 },
+ { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) },
+ { 0x54013, 0x0 },
+ { 0x54014, 0x0 },
+ { 0x54015, 0x0 },
+ { 0x54016, 0x0 },
+ { 0x54017, 0x0 },
+ { 0x54018, 0x0 },
+ { 0x54019, 0x84 },
+ { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 },
+ { 0x5401b, 0x4d66 },
+ { 0x5401c, 0x4d08 },
+ { 0x5401d, 0x0 },
+ { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ },
+ { 0x5401f, 0x84 },
+ { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 },
+ { 0x54021, 0x4d66 },
+ { 0x54022, 0x4d08 },
+ { 0x54023, 0x0 },
+ { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ },
+ { 0x54025, 0x0 },
+ { 0x54026, 0x0 },
+ { 0x54027, 0x0 },
+ { 0x54028, 0x0 },
+ { 0x54029, 0x0 },
+ { 0x5402a, 0x0 },
+ { 0x5402b, 0x1000 },
+ { 0x5402c, LPDDR4_CS },
+ { 0x5402d, 0x0 },
+ { 0x5402e, 0x0 },
+ { 0x5402f, 0x0 },
+ { 0x54030, 0x0 },
+ { 0x54031, 0x0 },
+ { 0x54032, 0x8400 },
+ { 0x54033, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) },
+ { 0x54034, 0x6600 },
+ { 0x54035, 0x84d },
+ { 0x54036, 0x4d },
+ { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ },
+ { 0x54038, 0x8400 },
+ { 0x54039, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) },
+ { 0x5403a, 0x6600 },
+ { 0x5403b, 0x84d },
+ { 0x5403c, 0x4d },
+ { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ },
+ { 0x5403e, 0x0 },
+ { 0x5403f, 0x0 },
+ { 0x54040, 0x0 },
+ { 0x54041, 0x0 },
+ { 0x54042, 0x0 },
+ { 0x54043, 0x0 },
+ { 0x54044, 0x0 },
+ { 0xd0000, 0x1 },
+};
+
+/* P1 message block paremeter for training firmware */
+struct dram_cfg_param lpddr4_fsp2_cfg[] = {
+ { 0xd0000, 0x0 },
+ { 0x54000, 0x0 },
+ { 0x54001, 0x0 },
+ { 0x54002, 0x102 },
+ { 0x54003, 0x64 },
+ { 0x54004, 0x2 },
+ { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },//PHY Ron/Rtt
+ { 0x54006, LPDDR4_PHY_VREF_VALUE },
+ { 0x54007, 0x0 },
+ { 0x54008, 0x121f },
+ { 0x54009, 0xc8 },
+ { 0x5400a, 0x0 },
+ { 0x5400b, 0x2 },
+ { 0x5400c, 0x0 },
+ { 0x5400d, 0x0 },
+ { 0x5400e, 0x0 },
+ { 0x5400f, 0x0 },
+ { 0x54010, 0x0 },
+ { 0x54011, 0x0 },
+ { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) },
+ { 0x54013, 0x0 },
+ { 0x54014, 0x0 },
+ { 0x54015, 0x0 },
+ { 0x54016, 0x0 },
+ { 0x54017, 0x0 },
+ { 0x54018, 0x0 },
+ { 0x54019, 0x84 },
+ { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 },
+ { 0x5401b, 0x4d66 },
+ { 0x5401c, 0x4d08 },
+ { 0x5401d, 0x0 },
+ { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ },
+ { 0x5401f, 0x84 },
+ { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 },
+ { 0x54021, 0x4d66 },
+ { 0x54022, 0x4d08 },
+ { 0x54023, 0x0 },
+ { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ },
+ { 0x54025, 0x0 },
+ { 0x54026, 0x0 },
+ { 0x54027, 0x0 },
+ { 0x54028, 0x0 },
+ { 0x54029, 0x0 },
+ { 0x5402a, 0x0 },
+ { 0x5402b, 0x1000 },
+ { 0x5402c, LPDDR4_CS },
+ { 0x5402d, 0x0 },
+ { 0x5402e, 0x0 },
+ { 0x5402f, 0x0 },
+ { 0x54030, 0x0 },
+ { 0x54031, 0x0 },
+ { 0x54032, 0x8400 },
+ { 0x54033, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) },
+ { 0x54034, 0x6600 },
+ { 0x54035, 0x84d },
+ { 0x54036, 0x4d },
+ { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ },
+ { 0x54038, 0x8400 },
+ { 0x54039, (LPDDR4_MR3 << 8) | (0x3100 & 0xff) },
+ { 0x5403a, 0x6600 },
+ { 0x5403b, 0x84d },
+ { 0x5403c, 0x4d },
+ { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ },
+ { 0x5403e, 0x0 },
+ { 0x5403f, 0x0 },
+ { 0x54040, 0x0 },
+ { 0x54041, 0x0 },
+ { 0x54042, 0x0 },
+ { 0x54043, 0x0 },
+ { 0x54044, 0x0 },
+ { 0xd0000, 0x1 },
+};
+
+/* P0 2D message block paremeter for training firmware */
+struct dram_cfg_param lpddr4_fsp0_2d_cfg[] = {
+ { 0xd0000, 0x0 },
+ { 0x54000, 0x0 },
+ { 0x54001, 0x0 },
+ { 0x54002, 0x0 },
+ { 0x54003, 0xbb8 },
+ { 0x54004, 0x2 },
+ { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) },//PHY Ron/Rtt
+ { 0x54006, LPDDR4_PHY_VREF_VALUE },
+ { 0x54007, 0x0 },
+ { 0x54008, 0x61 },
+ { 0x54009, 0xc8 },
+ { 0x5400a, 0x0 },
+ { 0x5400b, 0x2 },
+ { 0x5400c, 0x0 },
+ { 0x5400d, 0x0 },
+ { 0x5400e, 0x0 },
+ { 0x5400f, 0x100 },
+ { 0x54010, 0x1f7f },
+ { 0x54011, 0x0 },
+ { 0x54012, (LPDDR4_CS << 8) | (0x110 & 0xff) },
+ { 0x54013, 0x0 },
+ { 0x54014, 0x0 },
+ { 0x54015, 0x0 },
+ { 0x54016, 0x0 },
+ { 0x54017, 0x0 },
+ { 0x54018, 0x0 },
+ { 0x54019, 0x2dd4 },
+ { 0x5401a, (0x31 & 0xff00) | LPDDR4_MR3 },
+ { 0x5401b, 0x4d66 },
+ { 0x5401c, 0x4d08 },
+ { 0x5401d, 0x0 },
+ { 0x5401e, LPDDR4_MR22_RANK0/*0x16*/ },
+ { 0x5401f, 0x2dd4 },
+ { 0x54020, (0x31 & 0xff00) | LPDDR4_MR3 },
+ { 0x54021, 0x4d66 },
+ { 0x54022, 0x4d08 },
+ { 0x54023, 0x0 },
+ { 0x54024, LPDDR4_MR22_RANK1/*0x16*/ },
+ { 0x54025, 0x0 },
+ { 0x54026, 0x0 },
+ { 0x54027, 0x0 },
+ { 0x54028, 0x0 },
+ { 0x54029, 0x0 },
+ { 0x5402a, 0x0 },
+ { 0x5402b, 0x1000 },
+ { 0x5402c, LPDDR4_CS },
+ { 0x5402d, 0x0 },
+ { 0x5402e, 0x0 },
+ { 0x5402f, 0x0 },
+ { 0x54030, 0x0 },
+ { 0x54031, 0x0 },
+ { 0x54032, 0xd400 },
+ { 0x54033, (LPDDR4_MR3 << 8) | (0x312d & 0xff) },
+ { 0x54034, 0x6600 },
+ { 0x54035, 0x84d },
+ { 0x54036, 0x4d },
+ { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x1600*/ },
+ { 0x54038, 0xd400 },
+ { 0x54039, (LPDDR4_MR3 << 8) | (0x312d & 0xff) },
+ { 0x5403a, 0x6600 },
+ { 0x5403b, 0x84d },
+ { 0x5403c, 0x4d },
+ { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x1600*/ },
+ { 0x5403e, 0x0 },
+ { 0x5403f, 0x0 },
+ { 0x54040, 0x0 },
+ { 0x54041, 0x0 },
+ { 0x54042, 0x0 },
+ { 0x54043, 0x0 },
+ { 0x54044, 0x0 },
+ { 0xd0000, 0x1 },
+};
+
+/* DRAM PHY init engine image */
+struct dram_cfg_param lpddr4_phy_pie[] = {
+ { 0xd0000, 0x0 },
+ { 0x90000, 0x10 },
+ { 0x90001, 0x400 },
+ { 0x90002, 0x10e },
+ { 0x90003, 0x0 },
+ { 0x90004, 0x0 },
+ { 0x90005, 0x8 },
+ { 0x90029, 0xb },
+ { 0x9002a, 0x480 },
+ { 0x9002b, 0x109 },
+ { 0x9002c, 0x8 },
+ { 0x9002d, 0x448 },
+ { 0x9002e, 0x139 },
+ { 0x9002f, 0x8 },
+ { 0x90030, 0x478 },
+ { 0x90031, 0x109 },
+ { 0x90032, 0x0 },
+ { 0x90033, 0xe8 },
+ { 0x90034, 0x109 },
+ { 0x90035, 0x2 },
+ { 0x90036, 0x10 },
+ { 0x90037, 0x139 },
+ { 0x90038, 0xf },
+ { 0x90039, 0x7c0 },
+ { 0x9003a, 0x139 },
+ { 0x9003b, 0x44 },
+ { 0x9003c, 0x630 },
+ { 0x9003d, 0x159 },
+ { 0x9003e, 0x14f },
+ { 0x9003f, 0x630 },
+ { 0x90040, 0x159 },
+ { 0x90041, 0x47 },
+ { 0x90042, 0x630 },
+ { 0x90043, 0x149 },
+ { 0x90044, 0x4f },
+ { 0x90045, 0x630 },
+ { 0x90046, 0x179 },
+ { 0x90047, 0x8 },
+ { 0x90048, 0xe0 },
+ { 0x90049, 0x109 },
+ { 0x9004a, 0x0 },
+ { 0x9004b, 0x7c8 },
+ { 0x9004c, 0x109 },
+ { 0x9004d, 0x0 },
+ { 0x9004e, 0x1 },
+ { 0x9004f, 0x8 },
+ { 0x90050, 0x0 },
+ { 0x90051, 0x45a },
+ { 0x90052, 0x9 },
+ { 0x90053, 0x0 },
+ { 0x90054, 0x448 },
+ { 0x90055, 0x109 },
+ { 0x90056, 0x40 },
+ { 0x90057, 0x630 },
+ { 0x90058, 0x179 },
+ { 0x90059, 0x1 },
+ { 0x9005a, 0x618 },
+ { 0x9005b, 0x109 },
+ { 0x9005c, 0x40c0 },
+ { 0x9005d, 0x630 },
+ { 0x9005e, 0x149 },
+ { 0x9005f, 0x8 },
+ { 0x90060, 0x4 },
+ { 0x90061, 0x48 },
+ { 0x90062, 0x4040 },
+ { 0x90063, 0x630 },
+ { 0x90064, 0x149 },
+ { 0x90065, 0x0 },
+ { 0x90066, 0x4 },
+ { 0x90067, 0x48 },
+ { 0x90068, 0x40 },
+ { 0x90069, 0x630 },
+ { 0x9006a, 0x149 },
+ { 0x9006b, 0x10 },
+ { 0x9006c, 0x4 },
+ { 0x9006d, 0x18 },
+ { 0x9006e, 0x0 },
+ { 0x9006f, 0x4 },
+ { 0x90070, 0x78 },
+ { 0x90071, 0x549 },
+ { 0x90072, 0x630 },
+ { 0x90073, 0x159 },
+ { 0x90074, 0xd49 },
+ { 0x90075, 0x630 },
+ { 0x90076, 0x159 },
+ { 0x90077, 0x94a },
+ { 0x90078, 0x630 },
+ { 0x90079, 0x159 },
+ { 0x9007a, 0x441 },
+ { 0x9007b, 0x630 },
+ { 0x9007c, 0x149 },
+ { 0x9007d, 0x42 },
+ { 0x9007e, 0x630 },
+ { 0x9007f, 0x149 },
+ { 0x90080, 0x1 },
+ { 0x90081, 0x630 },
+ { 0x90082, 0x149 },
+ { 0x90083, 0x0 },
+ { 0x90084, 0xe0 },
+ { 0x90085, 0x109 },
+ { 0x90086, 0xa },
+ { 0x90087, 0x10 },
+ { 0x90088, 0x109 },
+ { 0x90089, 0x9 },
+ { 0x9008a, 0x3c0 },
+ { 0x9008b, 0x149 },
+ { 0x9008c, 0x9 },
+ { 0x9008d, 0x3c0 },
+ { 0x9008e, 0x159 },
+ { 0x9008f, 0x18 },
+ { 0x90090, 0x10 },
+ { 0x90091, 0x109 },
+ { 0x90092, 0x0 },
+ { 0x90093, 0x3c0 },
+ { 0x90094, 0x109 },
+ { 0x90095, 0x18 },
+ { 0x90096, 0x4 },
+ { 0x90097, 0x48 },
+ { 0x90098, 0x18 },
+ { 0x90099, 0x4 },
+ { 0x9009a, 0x58 },
+ { 0x9009b, 0xa },
+ { 0x9009c, 0x10 },
+ { 0x9009d, 0x109 },
+ { 0x9009e, 0x2 },
+ { 0x9009f, 0x10 },
+ { 0x900a0, 0x109 },
+ { 0x900a1, 0x5 },
+ { 0x900a2, 0x7c0 },
+ { 0x900a3, 0x109 },
+ { 0x900a4, 0x10 },
+ { 0x900a5, 0x10 },
+ { 0x900a6, 0x109 },
+ { 0x40000, 0x811 },
+ { 0x40020, 0x880 },
+ { 0x40040, 0x0 },
+ { 0x40060, 0x0 },
+ { 0x40001, 0x4008 },
+ { 0x40021, 0x83 },
+ { 0x40041, 0x4f },
+ { 0x40061, 0x0 },
+ { 0x40002, 0x4040 },
+ { 0x40022, 0x83 },
+ { 0x40042, 0x51 },
+ { 0x40062, 0x0 },
+ { 0x40003, 0x811 },
+ { 0x40023, 0x880 },
+ { 0x40043, 0x0 },
+ { 0x40063, 0x0 },
+ { 0x40004, 0x720 },
+ { 0x40024, 0xf },
+ { 0x40044, 0x1740 },
+ { 0x40064, 0x0 },
+ { 0x40005, 0x16 },
+ { 0x40025, 0x83 },
+ { 0x40045, 0x4b },
+ { 0x40065, 0x0 },
+ { 0x40006, 0x716 },
+ { 0x40026, 0xf },
+ { 0x40046, 0x2001 },
+ { 0x40066, 0x0 },
+ { 0x40007, 0x716 },
+ { 0x40027, 0xf },
+ { 0x40047, 0x2800 },
+ { 0x40067, 0x0 },
+ { 0x40008, 0x716 },
+ { 0x40028, 0xf },
+ { 0x40048, 0xf00 },
+ { 0x40068, 0x0 },
+ { 0x40009, 0x720 },
+ { 0x40029, 0xf },
+ { 0x40049, 0x1400 },
+ { 0x40069, 0x0 },
+ { 0x4000a, 0xe08 },
+ { 0x4002a, 0xc15 },
+ { 0x4004a, 0x0 },
+ { 0x4006a, 0x0 },
+ { 0x4000b, 0x623 },
+ { 0x4002b, 0x15 },
+ { 0x4004b, 0x0 },
+ { 0x4006b, 0x0 },
+ { 0x4000c, 0x4028 },
+ { 0x4002c, 0x80 },
+ { 0x4004c, 0x0 },
+ { 0x4006c, 0x0 },
+ { 0x4000d, 0xe08 },
+ { 0x4002d, 0xc1a },
+ { 0x4004d, 0x0 },
+ { 0x4006d, 0x0 },
+ { 0x4000e, 0x623 },
+ { 0x4002e, 0x1a },
+ { 0x4004e, 0x0 },
+ { 0x4006e, 0x0 },
+ { 0x4000f, 0x4040 },
+ { 0x4002f, 0x80 },
+ { 0x4004f, 0x0 },
+ { 0x4006f, 0x0 },
+ { 0x40010, 0x2604 },
+ { 0x40030, 0x15 },
+ { 0x40050, 0x0 },
+ { 0x40070, 0x0 },
+ { 0x40011, 0x708 },
+ { 0x40031, 0x5 },
+ { 0x40051, 0x0 },
+ { 0x40071, 0x2002 },
+ { 0x40012, 0x8 },
+ { 0x40032, 0x80 },
+ { 0x40052, 0x0 },
+ { 0x40072, 0x0 },
+ { 0x40013, 0x2604 },
+ { 0x40033, 0x1a },
+ { 0x40053, 0x0 },
+ { 0x40073, 0x0 },
+ { 0x40014, 0x708 },
+ { 0x40034, 0xa },
+ { 0x40054, 0x0 },
+ { 0x40074, 0x2002 },
+ { 0x40015, 0x4040 },
+ { 0x40035, 0x80 },
+ { 0x40055, 0x0 },
+ { 0x40075, 0x0 },
+ { 0x40016, 0x60a },
+ { 0x40036, 0x15 },
+ { 0x40056, 0x1200 },
+ { 0x40076, 0x0 },
+ { 0x40017, 0x61a },
+ { 0x40037, 0x15 },
+ { 0x40057, 0x1300 },
+ { 0x40077, 0x0 },
+ { 0x40018, 0x60a },
+ { 0x40038, 0x1a },
+ { 0x40058, 0x1200 },
+ { 0x40078, 0x0 },
+ { 0x40019, 0x642 },
+ { 0x40039, 0x1a },
+ { 0x40059, 0x1300 },
+ { 0x40079, 0x0 },
+ { 0x4001a, 0x4808 },
+ { 0x4003a, 0x880 },
+ { 0x4005a, 0x0 },
+ { 0x4007a, 0x0 },
+ { 0x900a7, 0x0 },
+ { 0x900a8, 0x790 },
+ { 0x900a9, 0x11a },
+ { 0x900aa, 0x8 },
+ { 0x900ab, 0x7aa },
+ { 0x900ac, 0x2a },
+ { 0x900ad, 0x10 },
+ { 0x900ae, 0x7b2 },
+ { 0x900af, 0x2a },
+ { 0x900b0, 0x0 },
+ { 0x900b1, 0x7c8 },
+ { 0x900b2, 0x109 },
+ { 0x900b3, 0x10 },
+ { 0x900b4, 0x2a8 },
+ { 0x900b5, 0x129 },
+ { 0x900b6, 0x8 },
+ { 0x900b7, 0x370 },
+ { 0x900b8, 0x129 },
+ { 0x900b9, 0xa },
+ { 0x900ba, 0x3c8 },
+ { 0x900bb, 0x1a9 },
+ { 0x900bc, 0xc },
+ { 0x900bd, 0x408 },
+ { 0x900be, 0x199 },
+ { 0x900bf, 0x14 },
+ { 0x900c0, 0x790 },
+ { 0x900c1, 0x11a },
+ { 0x900c2, 0x8 },
+ { 0x900c3, 0x4 },
+ { 0x900c4, 0x18 },
+ { 0x900c5, 0xe },
+ { 0x900c6, 0x408 },
+ { 0x900c7, 0x199 },
+ { 0x900c8, 0x8 },
+ { 0x900c9, 0x8568 },
+ { 0x900ca, 0x108 },
+ { 0x900cb, 0x18 },
+ { 0x900cc, 0x790 },
+ { 0x900cd, 0x16a },
+ { 0x900ce, 0x8 },
+ { 0x900cf, 0x1d8 },
+ { 0x900d0, 0x169 },
+ { 0x900d1, 0x10 },
+ { 0x900d2, 0x8558 },
+ { 0x900d3, 0x168 },
+ { 0x900d4, 0x70 },
+ { 0x900d5, 0x788 },
+ { 0x900d6, 0x16a },
+ { 0x900d7, 0x1ff8 },
+ { 0x900d8, 0x85a8 },
+ { 0x900d9, 0x1e8 },
+ { 0x900da, 0x50 },
+ { 0x900db, 0x798 },
+ { 0x900dc, 0x16a },
+ { 0x900dd, 0x60 },
+ { 0x900de, 0x7a0 },
+ { 0x900df, 0x16a },
+ { 0x900e0, 0x8 },
+ { 0x900e1, 0x8310 },
+ { 0x900e2, 0x168 },
+ { 0x900e3, 0x8 },
+ { 0x900e4, 0xa310 },
+ { 0x900e5, 0x168 },
+ { 0x900e6, 0xa },
+ { 0x900e7, 0x408 },
+ { 0x900e8, 0x169 },
+ { 0x900e9, 0x6e },
+ { 0x900ea, 0x0 },
+ { 0x900eb, 0x68 },
+ { 0x900ec, 0x0 },
+ { 0x900ed, 0x408 },
+ { 0x900ee, 0x169 },
+ { 0x900ef, 0x0 },
+ { 0x900f0, 0x8310 },
+ { 0x900f1, 0x168 },
+ { 0x900f2, 0x0 },
+ { 0x900f3, 0xa310 },
+ { 0x900f4, 0x168 },
+ { 0x900f5, 0x1ff8 },
+ { 0x900f6, 0x85a8 },
+ { 0x900f7, 0x1e8 },
+ { 0x900f8, 0x68 },
+ { 0x900f9, 0x798 },
+ { 0x900fa, 0x16a },
+ { 0x900fb, 0x78 },
+ { 0x900fc, 0x7a0 },
+ { 0x900fd, 0x16a },
+ { 0x900fe, 0x68 },
+ { 0x900ff, 0x790 },
+ { 0x90100, 0x16a },
+ { 0x90101, 0x8 },
+ { 0x90102, 0x8b10 },
+ { 0x90103, 0x168 },
+ { 0x90104, 0x8 },
+ { 0x90105, 0xab10 },
+ { 0x90106, 0x168 },
+ { 0x90107, 0xa },
+ { 0x90108, 0x408 },
+ { 0x90109, 0x169 },
+ { 0x9010a, 0x58 },
+ { 0x9010b, 0x0 },
+ { 0x9010c, 0x68 },
+ { 0x9010d, 0x0 },
+ { 0x9010e, 0x408 },
+ { 0x9010f, 0x169 },
+ { 0x90110, 0x0 },
+ { 0x90111, 0x8b10 },
+ { 0x90112, 0x168 },
+ { 0x90113, 0x0 },
+ { 0x90114, 0xab10 },
+ { 0x90115, 0x168 },
+ { 0x90116, 0x0 },
+ { 0x90117, 0x1d8 },
+ { 0x90118, 0x169 },
+ { 0x90119, 0x80 },
+ { 0x9011a, 0x790 },
+ { 0x9011b, 0x16a },
+ { 0x9011c, 0x18 },
+ { 0x9011d, 0x7aa },
+ { 0x9011e, 0x6a },
+ { 0x9011f, 0xa },
+ { 0x90120, 0x0 },
+ { 0x90121, 0x1e9 },
+ { 0x90122, 0x8 },
+ { 0x90123, 0x8080 },
+ { 0x90124, 0x108 },
+ { 0x90125, 0xf },
+ { 0x90126, 0x408 },
+ { 0x90127, 0x169 },
+ { 0x90128, 0xc },
+ { 0x90129, 0x0 },
+ { 0x9012a, 0x68 },
+ { 0x9012b, 0x9 },
+ { 0x9012c, 0x0 },
+ { 0x9012d, 0x1a9 },
+ { 0x9012e, 0x0 },
+ { 0x9012f, 0x408 },
+ { 0x90130, 0x169 },
+ { 0x90131, 0x0 },
+ { 0x90132, 0x8080 },
+ { 0x90133, 0x108 },
+ { 0x90134, 0x8 },
+ { 0x90135, 0x7aa },
+ { 0x90136, 0x6a },
+ { 0x90137, 0x0 },
+ { 0x90138, 0x8568 },
+ { 0x90139, 0x108 },
+ { 0x9013a, 0xb7 },
+ { 0x9013b, 0x790 },
+ { 0x9013c, 0x16a },
+ { 0x9013d, 0x1f },
+ { 0x9013e, 0x0 },
+ { 0x9013f, 0x68 },
+ { 0x90140, 0x8 },
+ { 0x90141, 0x8558 },
+ { 0x90142, 0x168 },
+ { 0x90143, 0xf },
+ { 0x90144, 0x408 },
+ { 0x90145, 0x169 },
+ { 0x90146, 0xc },
+ { 0x90147, 0x0 },
+ { 0x90148, 0x68 },
+ { 0x90149, 0x0 },
+ { 0x9014a, 0x408 },
+ { 0x9014b, 0x169 },
+ { 0x9014c, 0x0 },
+ { 0x9014d, 0x8558 },
+ { 0x9014e, 0x168 },
+ { 0x9014f, 0x8 },
+ { 0x90150, 0x3c8 },
+ { 0x90151, 0x1a9 },
+ { 0x90152, 0x3 },
+ { 0x90153, 0x370 },
+ { 0x90154, 0x129 },
+ { 0x90155, 0x20 },
+ { 0x90156, 0x2aa },
+ { 0x90157, 0x9 },
+ { 0x90158, 0x0 },
+ { 0x90159, 0x400 },
+ { 0x9015a, 0x10e },
+ { 0x9015b, 0x8 },
+ { 0x9015c, 0xe8 },
+ { 0x9015d, 0x109 },
+ { 0x9015e, 0x0 },
+ { 0x9015f, 0x8140 },
+ { 0x90160, 0x10c },
+ { 0x90161, 0x10 },
+ { 0x90162, 0x8138 },
+ { 0x90163, 0x10c },
+ { 0x90164, 0x8 },
+ { 0x90165, 0x7c8 },
+ { 0x90166, 0x101 },
+ { 0x90167, 0x8 },
+ { 0x90168, 0x0 },
+ { 0x90169, 0x8 },
+ { 0x9016a, 0x8 },
+ { 0x9016b, 0x448 },
+ { 0x9016c, 0x109 },
+ { 0x9016d, 0xf },
+ { 0x9016e, 0x7c0 },
+ { 0x9016f, 0x109 },
+ { 0x90170, 0x0 },
+ { 0x90171, 0xe8 },
+ { 0x90172, 0x109 },
+ { 0x90173, 0x47 },
+ { 0x90174, 0x630 },
+ { 0x90175, 0x109 },
+ { 0x90176, 0x8 },
+ { 0x90177, 0x618 },
+ { 0x90178, 0x109 },
+ { 0x90179, 0x8 },
+ { 0x9017a, 0xe0 },
+ { 0x9017b, 0x109 },
+ { 0x9017c, 0x0 },
+ { 0x9017d, 0x7c8 },
+ { 0x9017e, 0x109 },
+ { 0x9017f, 0x8 },
+ { 0x90180, 0x8140 },
+ { 0x90181, 0x10c },
+ { 0x90182, 0x0 },
+ { 0x90183, 0x1 },
+ { 0x90184, 0x8 },
+ { 0x90185, 0x8 },
+ { 0x90186, 0x4 },
+ { 0x90187, 0x8 },
+ { 0x90188, 0x8 },
+ { 0x90189, 0x7c8 },
+ { 0x9018a, 0x101 },
+ { 0x90006, 0x0 },
+ { 0x90007, 0x0 },
+ { 0x90008, 0x8 },
+ { 0x90009, 0x0 },
+ { 0x9000a, 0x0 },
+ { 0x9000b, 0x0 },
+ { 0xd00e7, 0x400 },
+ { 0x90017, 0x0 },
+ { 0x9001f, 0x2a },
+ { 0x90026, 0x6a },
+ { 0x400d0, 0x0 },
+ { 0x400d1, 0x101 },
+ { 0x400d2, 0x105 },
+ { 0x400d3, 0x107 },
+ { 0x400d4, 0x10f },
+ { 0x400d5, 0x202 },
+ { 0x400d6, 0x20a },
+ { 0x400d7, 0x20b },
+ { 0x2003a, 0x2 },
+ { 0x2000b, 0x5d },
+ { 0x2000c, 0xbb },
+ { 0x2000d, 0x753 },
+ { 0x2000e, 0x2c },
+ { 0x12000b, 0xc },
+ { 0x12000c, 0x19 },
+ { 0x12000d, 0xfa },
+ { 0x12000e, 0x10 },
+ { 0x22000b, 0x3 },
+ { 0x22000c, 0x6 },
+ { 0x22000d, 0x3e },
+ { 0x22000e, 0x10 },
+ { 0x9000c, 0x0 },
+ { 0x9000d, 0x173 },
+ { 0x9000e, 0x60 },
+ { 0x9000f, 0x6110 },
+ { 0x90010, 0x2152 },
+ { 0x90011, 0xdfbd },
+ { 0x90012, 0x60 },
+ { 0x90013, 0x6152 },
+ { 0x20010, 0x5a },
+ { 0x20011, 0x3 },
+ { 0x40080, 0xe0 },
+ { 0x40081, 0x12 },
+ { 0x40082, 0xe0 },
+ { 0x40083, 0x12 },
+ { 0x40084, 0xe0 },
+ { 0x40085, 0x12 },
+ { 0x140080, 0xe0 },
+ { 0x140081, 0x12 },
+ { 0x140082, 0xe0 },
+ { 0x140083, 0x12 },
+ { 0x140084, 0xe0 },
+ { 0x140085, 0x12 },
+ { 0x240080, 0xe0 },
+ { 0x240081, 0x12 },
+ { 0x240082, 0xe0 },
+ { 0x240083, 0x12 },
+ { 0x240084, 0xe0 },
+ { 0x240085, 0x12 },
+ { 0x400fd, 0xf },
+ { 0x10011, 0x1 },
+ { 0x10012, 0x1 },
+ { 0x10013, 0x180 },
+ { 0x10018, 0x1 },
+ { 0x10002, 0x6209 },
+ { 0x100b2, 0x1 },
+ { 0x101b4, 0x1 },
+ { 0x102b4, 0x1 },
+ { 0x103b4, 0x1 },
+ { 0x104b4, 0x1 },
+ { 0x105b4, 0x1 },
+ { 0x106b4, 0x1 },
+ { 0x107b4, 0x1 },
+ { 0x108b4, 0x1 },
+ { 0x11011, 0x1 },
+ { 0x11012, 0x1 },
+ { 0x11013, 0x180 },
+ { 0x11018, 0x1 },
+ { 0x11002, 0x6209 },
+ { 0x110b2, 0x1 },
+ { 0x111b4, 0x1 },
+ { 0x112b4, 0x1 },
+ { 0x113b4, 0x1 },
+ { 0x114b4, 0x1 },
+ { 0x115b4, 0x1 },
+ { 0x116b4, 0x1 },
+ { 0x117b4, 0x1 },
+ { 0x118b4, 0x1 },
+ { 0x12011, 0x1 },
+ { 0x12012, 0x1 },
+ { 0x12013, 0x180 },
+ { 0x12018, 0x1 },
+ { 0x12002, 0x6209 },
+ { 0x120b2, 0x1 },
+ { 0x121b4, 0x1 },
+ { 0x122b4, 0x1 },
+ { 0x123b4, 0x1 },
+ { 0x124b4, 0x1 },
+ { 0x125b4, 0x1 },
+ { 0x126b4, 0x1 },
+ { 0x127b4, 0x1 },
+ { 0x128b4, 0x1 },
+ { 0x13011, 0x1 },
+ { 0x13012, 0x1 },
+ { 0x13013, 0x180 },
+ { 0x13018, 0x1 },
+ { 0x13002, 0x6209 },
+ { 0x130b2, 0x1 },
+ { 0x131b4, 0x1 },
+ { 0x132b4, 0x1 },
+ { 0x133b4, 0x1 },
+ { 0x134b4, 0x1 },
+ { 0x135b4, 0x1 },
+ { 0x136b4, 0x1 },
+ { 0x137b4, 0x1 },
+ { 0x138b4, 0x1 },
+ { 0x2003a, 0x2 },
+ { 0xc0080, 0x2 },
+ { 0xd0000, 0x1 },
+};
+
+struct dram_fsp_msg lpddr4_dram_fsp_msg[] = {
+ {
+ /* P0 3000mts 1D */
+ .drate = 3000,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = lpddr4_fsp0_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_cfg),
+ },
+ {
+ /* P0 3000mts 2D */
+ .drate = 3000,
+ .fw_type = FW_2D_IMAGE,
+ .fsp_cfg = lpddr4_fsp0_2d_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_2d_cfg),
+ },
+ {
+ /* P1 400mts 1D */
+ .drate = 400,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = lpddr4_fsp1_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp1_cfg),
+ },
+ {
+ /* P1 100mts 1D */
+ .drate = 100,
+ .fw_type = FW_1D_IMAGE,
+ .fsp_cfg = lpddr4_fsp2_cfg,
+ .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp2_cfg),
+ },
+};
+
+/* lpddr4 timing config params on EVK board */
+struct dram_timing_info dram_timing = {
+ .ddrc_cfg = lpddr4_ddrc_cfg,
+ .ddrc_cfg_num = ARRAY_SIZE(lpddr4_ddrc_cfg),
+ .ddrphy_cfg = lpddr4_ddrphy_cfg,
+ .ddrphy_cfg_num = ARRAY_SIZE(lpddr4_ddrphy_cfg),
+ .fsp_msg = lpddr4_dram_fsp_msg,
+ .fsp_msg_num = ARRAY_SIZE(lpddr4_dram_fsp_msg),
+ .ddrphy_trained_csr = lpddr4_ddrphy_trained_csr,
+ .ddrphy_trained_csr_num = ARRAY_SIZE(lpddr4_ddrphy_trained_csr),
+ .ddrphy_pie = lpddr4_phy_pie,
+ .ddrphy_pie_num = ARRAY_SIZE(lpddr4_phy_pie),
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx8mm_pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/arch/ddr.h>
+
+#include <dm/uclass.h>
+#include <dm/device.h>
+#include <dm/uclass-internal.h>
+#include <dm/device-internal.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int spl_board_boot_device(enum boot_device boot_dev_spl)
+{
+ switch (boot_dev_spl) {
+ case SD2_BOOT:
+ case MMC2_BOOT:
+ return BOOT_DEVICE_MMC1;
+ case SD3_BOOT:
+ case MMC3_BOOT:
+ return BOOT_DEVICE_MMC2;
+ default:
+ return BOOT_DEVICE_NONE;
+ }
+}
+
+void spl_dram_init(void)
+{
+ ddr_init(&dram_timing);
+}
+
+void spl_board_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ puts("Normal Boot\n");
+
+ ret = uclass_get_device_by_name(UCLASS_CLK,
+ "clock-controller@30380000",
+ &dev);
+ if (ret < 0)
+ printf("Failed to find clock node. Check device tree\n");
+}
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ /* Just empty function now - can't decide what to choose */
+ debug("%s: %s\n", __func__, name);
+
+ return 0;
+}
+#endif
+
+#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1)
+#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
+
+static iomux_v3_cfg_t const uart_pads[] = {
+ IMX8MM_PAD_UART2_RXD_UART2_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+ IMX8MM_PAD_UART2_TXD_UART2_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const wdog_pads[] = {
+ IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
+};
+
+int board_early_init_f(void)
+{
+ struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
+
+ imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
+
+ set_wdog_reset(wdog);
+
+ imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
+
+ return 0;
+}
+
+void board_init_f(ulong dummy)
+{
+ int ret;
+
+ arch_cpu_init();
+
+ init_uart_clk(1);
+
+ board_early_init_f();
+
+ timer_init();
+
+ preloader_console_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ ret = spl_init();
+ if (ret) {
+ debug("spl_init() failed: %d\n", ret);
+ hang();
+ }
+
+ enable_tzc380();
+
+ /* DDR initialization */
+ spl_dram_init();
+
+ board_init_r(NULL, 0);
+}
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ puts ("resetting ...\n");
+
+ reset_cpu(WDOG1_BASE_ADDR);
+
+ return 0;
+}
{ DDRC_SCHED(0), 0x29511505 },
{ DDRC_SCHED1(0), 0x0000002c },
{ DDRC_PERFHPR1(0), 0x5900575b },
- { DDRC_PERFLPR1(0), 0x00000009 },
- { DDRC_PERFWR1(0), 0x02005574 },
+ /* 150T starve and 0x90 max tran len */
+ { DDRC_PERFLPR1(0), 0x90000096 },
+ /* 300T starve and 0x10 max tran len */
+ { DDRC_PERFWR1(0), 0x1000012c },
{ DDRC_DBG0(0), 0x00000016 },
{ DDRC_DBG1(0), 0x00000000 },
{ DDRC_DBGCMD(0), 0x00000000 },
{ DDRC_PCFGR_0(0), 0x000010f3 },
{ DDRC_PCFGW_0(0), 0x000072ff },
{ DDRC_PCTRL_0(0), 0x00000001 },
- { DDRC_PCFGQOS0_0(0), 0x01110d00 },
- { DDRC_PCFGQOS1_0(0), 0x00620790 },
- { DDRC_PCFGWQOS0_0(0), 0x00100001 },
- { DDRC_PCFGWQOS1_0(0), 0x0000041f },
+ /* disable Read Qos*/
+ { DDRC_PCFGQOS0_0(0), 0x00000e00 },
+ { DDRC_PCFGQOS1_0(0), 0x0062ffff },
+ /* disable Write Qos*/
+ { DDRC_PCFGWQOS0_0(0), 0x00000e00 },
+ { DDRC_PCFGWQOS1_0(0), 0x0000ffff },
/* Frequency 1: 400mbps */
{ DDRC_FREQ1_DRAMTMG0(0), 0x0d0b010c },
Build U-Boot
============
-$ export ATF_LOAD_ADDR=0x80000000
-$ export BL33_LOAD_ADDR=0x80020000
$ make imx8qm_mek_defconfig
$ make flash.bin
-$ dd if=u-boot.itb of=flash.bin bs=512 seek=1984
Flash the binary into the SD card
=================================
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#define __ASSEMBLY__
+
+/* This file is to create a container image could be loaded by SPL */
+BOOT_FROM SD 0x400
+SOC_TYPE IMX8QM
+CONTAINER
+IMAGE A35 bl31.bin 0x80000000
+IMAGE A35 u-boot.bin CONFIG_SYS_TEXT_BASE
Build U-Boot
============
-$ export ATF_LOAD_ADDR=0x80000000
-$ export BL33_LOAD_ADDR=0x80020000
$ make imx8qxp_mek_defconfig
$ make flash.bin
-$ dd if=u-boot.itb of=flash.bin bs=512 seek=528
Flash the binary into the SD card
=================================
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#define __ASSEMBLY__
+
+/* This file is to create a container image could be loaded by SPL */
+BOOT_FROM SD 0x400
+SOC_TYPE IMX8QX
+CONTAINER
+IMAGE A35 bl31.bin 0x80000000
+IMAGE A35 u-boot.bin CONFIG_SYS_TEXT_BASE
To get SPI communication to work R320, R321,R322 and C178 need to be populated.
Look in the schematics for the proper component values.
-Follow the instructions from doc/README.mxs to generate a bootable SD card or
-to generate a binary to be flashed into SPI NOR.
+Follow the instructions from doc/imx/common/mxs.txt to generate a bootable
+SD card or to generate a binary to be flashed into SPI NOR.
/*
* Secure boot support
*/
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#include <asm/gpio.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/mxc_i2c.h>
-#include <asm/mach-imx/spi.h>
#include <asm/io.h>
#include <linux/sizes.h>
#include <common.h>
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
-
#define OTGID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW |\
PAD_CTL_DSE_80ohm | PAD_CTL_HYS | \
MX6_PAD_FEC_TX_CLK__GPIO_4_21 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
-#ifdef CONFIG_MXC_SPI
-static iomux_v3_cfg_t ecspi1_pads[] = {
- MX6_PAD_ECSPI1_MISO__ECSPI_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6_PAD_ECSPI1_MOSI__ECSPI_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6_PAD_ECSPI1_SCLK__ECSPI_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6_PAD_ECSPI1_SS0__GPIO4_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-int board_spi_cs_gpio(unsigned bus, unsigned cs)
-{
- return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 11)) : -1;
-}
-
-static void setup_spi(void)
-{
- imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
-}
-#endif
-
static void setup_iomux_uart(void)
{
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-#ifdef CONFIG_MXC_SPI
- gpio_request(IMX_GPIO_NR(4, 11), "spi_cs");
- setup_spi();
-#endif
-
#ifdef CONFIG_FEC_MXC
setup_fec();
#endif
PLUGIN board/freescale/mx6sllevk/plugin.bin 0x00907000
#else
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
/*
* Secure boot support
*/
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
This will generate the SPL image called SPL and the u-boot.img.
+1. Booting via SDCard
+---------------------
+
- Flash the SPL image into the micro SD card:
sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
- Insert the micro SD card in the board, power it up and U-Boot messages should
come up.
+
+2. Booting via Serial Download Protocol (SDP)
+---------------------------------------------
+
+The mx6ulevk board can boot from USB OTG port using the SDP, target will
+enter in SDP mode in case an SD Card is not connect or boot switches are
+set as below:
+
+Sw602: 0 1
+SW601: x x x x
+
+The following tools can be used to boot via SDP, for both tools you must
+connect an USB cable in USB OTG port.
+
+- Method 1: Universal Update Utility (uuu)
+
+The UUU binary can be downloaded in release tab from link below:
+https://github.com/NXPmicro/mfgtools
+
+The following script should be created to boot SPL + u-boot-dtb.img binaries:
+
+ $ cat uuu_script
+ uuu_version 1.1.4
+
+ SDP: boot -f SPL
+ SDPU: write -f u-boot-dtb.img -addr 0x877fffc0
+ SDPU: jump -addr 0x877fffc0
+ SDPU: done
+
+Please note that the address above is calculated based on SYS_TEXT_BASE address:
+
+0x877fffc0 = 0x87800000 (SYS_TEXT_BASE) - 0x40 (U-Boot proper Header size)
+
+Power on the target and run the following command from U-Boot root directory:
+
+ $ sudo ./uuu uuu_script
+
+- Method 2: imx usb loader tool (imx_usb):
+
+The imx_usb_loader tool can be downloaded in link below:
+https://github.com/boundarydevices/imx_usb_loader
+
+Build the source code and run the following commands from U-Boot root
+directory:
+
+ $ sudo ./imx_usb SPL
+ $ sudo ./imx_usb u-boot-dtb.img
MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-#ifndef CONFIG_SPL_BUILD
static iomux_v3_cfg_t const usdhc1_pads[] = {
MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
/* RST_B */
MX6_PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
-#endif
/*
* mx6ul_14x14_evk board default supports sd card. If want to use
int board_mmc_init(bd_t *bis)
{
-#ifdef CONFIG_SPL_BUILD
-#if defined(CONFIG_MX6UL_14X14_EVK_EMMC_REWORK)
- imx_iomux_v3_setup_multiple_pads(usdhc2_emmc_pads,
- ARRAY_SIZE(usdhc2_emmc_pads));
-#else
- imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
-#endif
- gpio_direction_output(USDHC2_PWR_GPIO, 0);
- udelay(500);
- gpio_direction_output(USDHC2_PWR_GPIO, 1);
- usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- return fsl_esdhc_initialize(bis, &usdhc_cfg[1]);
-#else
int i, ret;
/*
return ret;
}
}
-#endif
return 0;
}
#endif
}
#endif
-#ifdef CONFIG_VIDEO_MXS
+#ifdef CONFIG_DM_VIDEO
static iomux_v3_cfg_t const lcd_pads[] = {
- MX6_PAD_LCD_CLK__LCDIF_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_ENABLE__LCDIF_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_HSYNC__LCDIF_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_VSYNC__LCDIF_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA00__LCDIF_DATA00 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA01__LCDIF_DATA01 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA02__LCDIF_DATA02 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA03__LCDIF_DATA03 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA04__LCDIF_DATA04 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA05__LCDIF_DATA05 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA06__LCDIF_DATA06 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA07__LCDIF_DATA07 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA08__LCDIF_DATA08 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA09__LCDIF_DATA09 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA10__LCDIF_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA11__LCDIF_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA12__LCDIF_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA13__LCDIF_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA14__LCDIF_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA15__LCDIF_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA16__LCDIF_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA17__LCDIF_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA18__LCDIF_DATA18 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA19__LCDIF_DATA19 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA20__LCDIF_DATA20 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA21__LCDIF_DATA21 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA22__LCDIF_DATA22 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX6_PAD_LCD_DATA23__LCDIF_DATA23 | MUX_PAD_CTRL(LCD_PAD_CTRL),
-
- /* LCD_RST */
- MX6_PAD_SNVS_TAMPER9__GPIO5_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
-
/* Use GPIO for Brightness adjustment, duty cycle = period. */
MX6_PAD_GPIO1_IO08__GPIO1_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
return 0;
}
+#else
+static inline int setup_lcd(void) { return 0; }
#endif
int board_early_init_f(void)
board_qspi_init();
#endif
-#ifdef CONFIG_VIDEO_MXS
- setup_lcd();
-#endif
-
return 0;
}
env_set("board_rev", "14X14");
#endif
+ setup_lcd();
+
return 0;
}
F: include/configs/mx6ullevk.h
F: configs/mx6ull_14x14_evk_defconfig
F: configs/mx6ull_14x14_evk_plugin_defconfig
+F: configs/mx6ulz_14x14_evk_defconfig
PLUGIN board/freescale/mx6ullevk/plugin.bin 0x00907000
#else
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#endif
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- env_set("board_name", "EVK");
+ if (is_cpu_type(MXC_CPU_MX6ULZ))
+ env_set("board_name", "ULZ-EVK");
+ else
+ env_set("board_name", "EVK");
env_set("board_rev", "14X14");
#endif
int checkboard(void)
{
- puts("Board: MX6ULL 14x14 EVK\n");
+ if (is_cpu_type(MXC_CPU_MX6ULZ))
+ puts("Board: MX6ULZ 14x14 EVK\n");
+ else
+ puts("Board: MX6ULL 14x14 EVK\n");
return 0;
}
/*
* Secure boot support
*/
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
PLUGIN board/freescale/mx7ulp_evk/plugin.bin 0x2F020000
#else
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
/*
*/
#include <common.h>
+#include <fdt_support.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mx7ulp-pins.h>
#include <asm/arch/iomux.h>
+#include <asm/mach-imx/boot_mode.h>
DECLARE_GLOBAL_DATA_PTR;
return 0;
}
+
+#if IS_ENABLED(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ const char *path;
+ int rc, nodeoff;
+
+ if (get_boot_device() == USB_BOOT) {
+ path = fdt_get_alias(blob, "mmc0");
+ if (!path) {
+ puts("Not found mmc0\n");
+ return 0;
+ }
+
+ nodeoff = fdt_path_offset(blob, path);
+ if (nodeoff < 0)
+ return 0;
+
+ printf("Found usdhc0 node\n");
+ if (fdt_get_property(blob, nodeoff, "vqmmc-supply",
+ NULL) != NULL) {
+ rc = fdt_delprop(blob, nodeoff, "vqmmc-supply");
+ if (!rc) {
+ puts("Removed vqmmc-supply property\n");
+add:
+ rc = fdt_setprop(blob, nodeoff,
+ "no-1-8-v", NULL, 0);
+ if (rc == -FDT_ERR_NOSPACE) {
+ rc = fdt_increase_size(blob, 32);
+ if (!rc)
+ goto add;
+ } else if (rc) {
+ printf("Failed to add no-1-8-v property, %d\n", rc);
+ } else {
+ puts("Added no-1-8-v property\n");
+ }
+ } else {
+ printf("Failed to remove vqmmc-supply property, %d\n", rc);
+ }
+ }
+ }
+
+ return 0;
+}
+#endif
# SPDX-License-Identifier: GPL-2.0+
#
ifdef CONFIG_SPL_BUILD
-obj-y = common.o spl.o
+obj-y = spl.o
else
-obj-y := common.o display5.o
+obj-y := display5.o
endif
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2017 DENX Software Engineering
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- */
-
-#include <asm/mach-imx/iomux-v3.h>
-#include <asm/arch/mx6-pins.h>
-#include "common.h"
-
-iomux_v3_cfg_t const uart_pads[] = {
- /* UART4 */
- MX6_PAD_CSI0_DAT12__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_CSI0_DAT13__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_CSI0_DAT16__UART4_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_CSI0_DAT17__UART4_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-iomux_v3_cfg_t const uart_console_pads[] = {
- /* UART5 */
- MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_CSI0_DAT18__UART5_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_CSI0_DAT19__UART5_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-void displ5_set_iomux_uart_spl(void)
-{
- SETUP_IOMUX_PADS(uart_console_pads);
-}
-
-void displ5_set_iomux_uart(void)
-{
- SETUP_IOMUX_PADS(uart_pads);
-}
-
-iomux_v3_cfg_t const misc_pads_spl[] = {
- /* Emergency recovery pin */
- MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-void displ5_set_iomux_misc_spl(void)
-{
- SETUP_IOMUX_PADS(misc_pads_spl);
-}
-
-#ifdef CONFIG_MXC_SPI
-iomux_v3_cfg_t const ecspi_pads[] = {
- /* SPI3 */
- MX6_PAD_DISP0_DAT2__ECSPI3_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6_PAD_DISP0_DAT1__ECSPI3_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6_PAD_DISP0_DAT0__ECSPI3_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6_PAD_DISP0_DAT3__ECSPI3_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT4__ECSPI3_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT5__ECSPI3_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT6__ECSPI3_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_DISP0_DAT7__ECSPI3_RDY | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-iomux_v3_cfg_t const ecspi2_pads[] = {
- /* SPI2, NOR Flash nWP, CS0 */
- MX6_PAD_CSI0_DAT10__ECSPI2_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6_PAD_CSI0_DAT11__GPIO5_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-int board_spi_cs_gpio(unsigned int bus, unsigned int cs)
-{
- if (bus != 1 || cs != 0)
- return -EINVAL;
-
- return IMX_GPIO_NR(5, 29);
-}
-
-void displ5_set_iomux_ecspi_spl(void)
-{
- SETUP_IOMUX_PADS(ecspi2_pads);
-}
-
-void displ5_set_iomux_ecspi(void)
-{
- SETUP_IOMUX_PADS(ecspi_pads);
-}
-
-#else
-void displ5_set_iomux_ecspi_spl(void) {}
-void displ5_set_iomux_ecspi(void) {}
-#endif
-
-#ifdef CONFIG_FSL_ESDHC_IMX
-iomux_v3_cfg_t const usdhc4_pads[] = {
- MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NANDF_ALE__SD4_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-};
-
-void displ5_set_iomux_usdhc_spl(void)
-{
- SETUP_IOMUX_PADS(usdhc4_pads);
-}
-
-void displ5_set_iomux_usdhc(void)
-{
- SETUP_IOMUX_PADS(usdhc4_pads);
-}
-
-#else
-void displ5_set_iomux_usdhc_spl(void) {}
-void displ5_set_iomux_usdhc(void) {}
-#endif
#define ENET_PAD_CTRL_CLK ((PAD_CTL_PUS_100K_UP & ~PAD_CTL_PKE) | \
PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
-void displ5_set_iomux_uart_spl(void);
-void displ5_set_iomux_uart(void);
-void displ5_set_iomux_ecspi_spl(void);
-void displ5_set_iomux_ecspi(void);
-void displ5_set_iomux_usdhc_spl(void);
-void displ5_set_iomux_usdhc(void);
-void displ5_set_iomux_misc_spl(void);
-
#endif /* __DISPL5_COMMON_H_ */
#include <asm/gpio.h>
#include <malloc.h>
#include <asm/mach-imx/iomux-v3.h>
-#include <asm/mach-imx/mxc_i2c.h>
#include <asm/mach-imx/boot_mode.h>
-#include <asm/mach-imx/spi.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
#include <miiphy.h>
#include <netdev.h>
#include <i2c.h>
#include <dm/platform_data/serial_mxc.h>
#include <dm/platdata.h>
-#ifndef CONFIG_MXC_SPI
-#error "CONFIG_SPI must be set for this board"
-#error "Please check your config file"
-#endif
-
#include "common.h"
DECLARE_GLOBAL_DATA_PTR;
static u32 cpu_id;
static u32 unit_id;
-#define EM_PAD IMX_GPIO_NR(3, 29)
-#define SW0 IMX_GPIO_NR(2, 4)
-#define SW1 IMX_GPIO_NR(2, 5)
-#define SW2 IMX_GPIO_NR(2, 6)
-#define SW3 IMX_GPIO_NR(2, 7)
-#define HW0 IMX_GPIO_NR(6, 7)
-#define HW1 IMX_GPIO_NR(6, 9)
-#define HW2 IMX_GPIO_NR(6, 10)
-#define HW3 IMX_GPIO_NR(6, 11)
-#define HW4 IMX_GPIO_NR(4, 7)
-#define HW5 IMX_GPIO_NR(4, 11)
-#define HW6 IMX_GPIO_NR(4, 13)
-#define HW7 IMX_GPIO_NR(4, 15)
-
-int gpio_table_sw_ids[] = {
- SW0, SW1, SW2, SW3
+const char *gpio_table_sw_names[] = {
+ "GPIO2_4", "GPIO2_5", "GPIO2_6", "GPIO2_7"
};
const char *gpio_table_sw_ids_names[] = {
"sw0", "sw1", "sw2", "sw3"
};
-int gpio_table_hw_ids[] = {
- HW0, HW1, HW2, HW3, HW4, HW5, HW6, HW7
+const char *gpio_table_hw_names[] = {
+ "GPIO6_7", "GPIO6_9", "GPIO6_10", "GPIO6_11",
+ "GPIO4_7", "GPIO4_11", "GPIO4_13", "GPIO4_15"
};
const char *gpio_table_hw_ids_names[] = {
"hw0", "hw1", "hw2", "hw3", "hw4", "hw5", "hw6", "hw7"
};
-static int get_board_id(int *ids, const char **c, int size,
- bool *valid, u32 *id)
+static int get_board_id(const char **pin_names, const char **ids_names,
+ int size, bool *valid, u32 *id)
{
+ struct gpio_desc desc;
int i, ret, val;
*valid = false;
for (i = 0; i < size; i++) {
- ret = gpio_request(ids[i], c[i]);
+ memset(&desc, 0, sizeof(desc));
+
+ ret = dm_gpio_lookup_name(pin_names[i], &desc);
if (ret) {
- printf("Can't request SWx gpios\n");
+ printf("Can't lookup request SWx gpios\n");
return ret;
}
- }
- for (i = 0; i < size; i++) {
- ret = gpio_direction_input(ids[i]);
+ ret = dm_gpio_request(&desc, ids_names[i]);
if (ret) {
- printf("Can't set SWx gpios direction\n");
+ printf("Can't lookup request SWx gpios\n");
return ret;
}
- }
- for (i = 0; i < size; i++) {
- val = gpio_get_value(ids[i]);
+ dm_gpio_set_dir_flags(&desc, GPIOD_IS_IN);
+
+ val = dm_gpio_get_value(&desc);
if (val < 0) {
printf("Can't get SW%d ID\n", i);
*id = 0;
return 0;
}
-#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
-/* I2C1: TFA9879 */
-struct i2c_pads_info i2c_pad_info0 = {
- .scl = {
- .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
- .gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC,
- .gp = IMX_GPIO_NR(3, 21)
- },
- .sda = {
- .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC,
- .gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC,
- .gp = IMX_GPIO_NR(3, 28)
- }
-};
-
-/* I2C2: TIVO TM4C123 */
-struct i2c_pads_info i2c_pad_info1 = {
- .scl = {
- .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
- .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
- .gp = IMX_GPIO_NR(2, 30)
- },
- .sda = {
- .i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC,
- .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
- .gp = IMX_GPIO_NR(3, 16)
- }
-};
-
-/* I2C3: PMIC PF0100, EEPROM AT24C256C */
-struct i2c_pads_info i2c_pad_info2 = {
- .scl = {
- .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
- .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC,
- .gp = IMX_GPIO_NR(3, 17)
- },
- .sda = {
- .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
- .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
- .gp = IMX_GPIO_NR(3, 18)
- }
-};
-
iomux_v3_cfg_t const misc_pads[] = {
/* Prod ID GPIO pins */
MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
-#ifdef CONFIG_FSL_ESDHC_IMX
-struct fsl_esdhc_cfg usdhc_cfg[1] = {
- { USDHC4_BASE_ADDR, 0, 8, },
-};
-
-int board_mmc_getcd(struct mmc *mmc)
+/*
+ * Do not overwrite the console
+ * Always use serial for U-Boot console
+ */
+int overwrite_console(void)
{
return 1;
}
-int board_mmc_init(bd_t *bis)
-{
- displ5_set_iomux_usdhc();
-
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
-
- return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
-}
-#endif /* CONFIG_FSL_ESDHC_IMX */
-
-static void displ5_setup_ecspi(void)
-{
- int ret;
-
- displ5_set_iomux_ecspi();
-
- ret = gpio_request(IMX_GPIO_NR(5, 29), "spi2_cs0");
- if (!ret)
- gpio_direction_output(IMX_GPIO_NR(5, 29), 1);
-
- ret = gpio_request(IMX_GPIO_NR(7, 0), "spi2_#wp");
- if (!ret)
- gpio_direction_output(IMX_GPIO_NR(7, 0), 1);
-}
-
-#ifdef CONFIG_FEC_MXC
-iomux_v3_cfg_t const enet_pads[] = {
- MX6_PAD_ENET_TXD1__ENET_1588_EVENT0_IN | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
-
- /* for old evalboard with R159 present and R160 not populated */
- MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(NO_PAD_CTRL),
-
- MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
-
- MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
- /*INT#_GBE*/
- MX6_PAD_ENET_TX_EN__GPIO1_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-static void setup_iomux_enet(void)
-{
- SETUP_IOMUX_PADS(enet_pads);
- gpio_direction_input(IMX_GPIO_NR(1, 28)); /*INT#_GBE*/
-}
-
-static int setup_mac_from_fuse(void)
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
{
- unsigned char enetaddr[6];
- int ret;
-
- ret = eth_env_get_enetaddr("ethaddr", enetaddr);
- if (ret) /* ethaddr is already set */
- return 0;
-
- imx_get_mac_from_fuse(0, enetaddr);
-
- if (is_valid_ethaddr(enetaddr)) {
- eth_env_set_enetaddr("ethaddr", enetaddr);
- return 0;
- }
-
+ fdt_fixup_ethernet(blob);
return 0;
}
+#endif
-int board_eth_init(bd_t *bd)
+int board_phy_config(struct phy_device *phydev)
{
- struct phy_device *phydev;
- struct mii_dev *bus;
- int ret;
-
- setup_iomux_enet();
-
- iomuxc_set_rgmii_io_voltage(DDR_SEL_1P5V_IO);
-
- ret = enable_fec_anatop_clock(0, ENET_125MHZ);
- if (ret)
- return ret;
-
- setup_mac_from_fuse();
-
- bus = fec_get_miibus(IMX_FEC_BASE, -1);
- if (!bus)
- return -ENODEV;
-
- /*
- * We use here the "rgmii-id" mode of operation and allow M88E1512
- * PHY to use its internally callibrated RX/TX delays
- */
- phydev = phy_find_by_mask(bus, 0xffffffff /* (0xf << 4) */,
- PHY_INTERFACE_MODE_RGMII_ID);
- if (!phydev) {
- ret = -ENODEV;
- goto err_phy;
- }
-
/* display5 due to PCB routing can only work with 100 Mbps */
phydev->advertising &= ~(ADVERTISED_1000baseX_Half |
ADVERTISED_1000baseX_Full |
SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
- ret = fec_probe(bd, -1, IMX_FEC_BASE, bus, phydev);
- if (ret)
- goto err_sw;
-
- return 0;
-
-err_sw:
- free(phydev);
-err_phy:
- mdio_unregister(bus);
- free(bus);
- return ret;
-}
-#endif /* CONFIG_FEC_MXC */
-
-/*
- * Do not overwrite the console
- * Always use serial for U-Boot console
- */
-int overwrite_console(void)
-{
- return 1;
-}
+ if (phydev->drv->config)
+ return phydev->drv->config(phydev);
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
-{
- fdt_fixup_ethernet(blob);
return 0;
}
-#endif
int board_init(void)
{
+ struct gpio_desc phy_int_gbe, spi2_wp;
+ int ret;
+
debug("board init\n");
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- /* Setup iomux for non console UARTS */
- displ5_set_iomux_uart();
-
- displ5_setup_ecspi();
-
+ /* Setup misc (application specific) stuff */
SETUP_IOMUX_PADS(misc_pads);
- get_board_id(gpio_table_sw_ids, &gpio_table_sw_ids_names[0],
- ARRAY_SIZE(gpio_table_sw_ids), &sw_ids_valid, &unit_id);
+ get_board_id(gpio_table_sw_names, &gpio_table_sw_ids_names[0],
+ ARRAY_SIZE(gpio_table_sw_names), &sw_ids_valid, &unit_id);
debug("SWx unit_id 0x%x\n", unit_id);
- get_board_id(gpio_table_hw_ids, &gpio_table_hw_ids_names[0],
- ARRAY_SIZE(gpio_table_hw_ids), &hw_ids_valid, &cpu_id);
+ get_board_id(gpio_table_hw_names, &gpio_table_hw_ids_names[0],
+ ARRAY_SIZE(gpio_table_hw_names), &hw_ids_valid, &cpu_id);
debug("HWx cpu_id 0x%x\n", cpu_id);
if (hw_ids_valid && sw_ids_valid)
udelay(25);
- setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
- setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
- setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
+ /* Setup low level FEC (ETH) */
+ ret = dm_gpio_lookup_name("GPIO1_28", &phy_int_gbe);
+ if (ret) {
+ printf("Cannot get GPIO1_28\n");
+ } else {
+ ret = dm_gpio_request(&phy_int_gbe, "INT_GBE");
+ if (!ret)
+ dm_gpio_set_dir_flags(&phy_int_gbe, GPIOD_IS_IN);
+ }
+
+ iomuxc_set_rgmii_io_voltage(DDR_SEL_1P5V_IO);
+ enable_fec_anatop_clock(0, ENET_125MHZ);
+
+ /* Setup #WP for SPI-NOR memory */
+ ret = dm_gpio_lookup_name("GPIO7_0", &spi2_wp);
+ if (ret) {
+ printf("Cannot get GPIO7_0\n");
+ } else {
+ ret = dm_gpio_request(&spi2_wp, "spi2_#wp");
+ if (!ret)
+ dm_gpio_set_dir_flags(&spi2_wp, GPIOD_IS_OUT |
+ GPIOD_IS_OUT_ACTIVE);
+ }
return 0;
}
int misc_init_r(void)
{
+ struct gpio_desc em_pad;
int ret;
setup_boot_modes();
- ret = gpio_request(EM_PAD, "Emergency_PAD");
+ ret = dm_gpio_lookup_name("GPIO3_29", &em_pad);
if (ret) {
- printf("Can't request emergency PAD gpio\n");
+ printf("Can't find emergency PAD gpio\n");
return ret;
}
- ret = gpio_direction_input(EM_PAD);
+ ret = dm_gpio_request(&em_pad, "Emergency_PAD");
if (ret) {
- printf("Can't set emergency PAD direction\n");
+ printf("Can't request emergency PAD gpio\n");
return ret;
}
+ dm_gpio_set_dir_flags(&em_pad, GPIOD_IS_IN);
+
return 0;
}
.trasmin = 3500,
};
+iomux_v3_cfg_t const uart_console_pads[] = {
+ /* UART5 */
+ MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_CSI0_DAT18__UART5_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_CSI0_DAT19__UART5_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+void displ5_set_iomux_uart_spl(void)
+{
+ SETUP_IOMUX_PADS(uart_console_pads);
+}
+
+iomux_v3_cfg_t const misc_pads_spl[] = {
+ /* Emergency recovery pin */
+ MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+void displ5_set_iomux_misc_spl(void)
+{
+ SETUP_IOMUX_PADS(misc_pads_spl);
+}
+
+#ifdef CONFIG_MXC_SPI
+iomux_v3_cfg_t const ecspi2_pads[] = {
+ /* SPI2, NOR Flash nWP, CS0 */
+ MX6_PAD_CSI0_DAT10__ECSPI2_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_CSI0_DAT11__GPIO5_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+int board_spi_cs_gpio(unsigned int bus, unsigned int cs)
+{
+ if (bus != 1 || cs != 0)
+ return -EINVAL;
+
+ return IMX_GPIO_NR(5, 29);
+}
+
+void displ5_set_iomux_ecspi_spl(void)
+{
+ SETUP_IOMUX_PADS(ecspi2_pads);
+}
+
+#else
+void displ5_set_iomux_ecspi_spl(void) {}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC_IMX
+iomux_v3_cfg_t const usdhc4_pads[] = {
+ MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_ALE__SD4_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+void displ5_set_iomux_usdhc_spl(void)
+{
+ SETUP_IOMUX_PADS(usdhc4_pads);
+}
+
+#else
+void displ5_set_iomux_usdhc_spl(void) {}
+#endif
+
static void ccgr_init(void)
{
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
{USDHC2_BASE_ADDR} /* Baseboard */
};
+void board_boot_order(u32 *spl_boot_list)
+{
+ struct src *psrc = (struct src *)SRC_BASE_ADDR;
+ unsigned int reg = readl(&psrc->sbmr1) >> 11;
+ /*
+ * Upon reading BOOT_CFG register the following map is done:
+ * Bit 11 and 12 of BOOT_CFG register can determine the current
+ * mmc port
+ * 0x1 SD1-SOM
+ * 0x2 SD2-Baseboard
+ */
+
+ reg &= 0x3; /* Only care about bottom 2 bits */
+ switch (reg) {
+ case 0:
+ spl_boot_list[0] = BOOT_DEVICE_MMC1;
+ break;
+ case 1:
+ spl_boot_list[0] = BOOT_DEVICE_MMC2;
+ break;
+ }
+
+ /* If we cannot find a valid MMC/SD card, try NAND */
+ spl_boot_list[1] = BOOT_DEVICE_NAND;
+
+ /* As a last resort, use serial downloader */
+ spl_boot_list[2] = BOOT_DEVICE_BOARD;
+}
+
int board_mmc_init(bd_t *bis)
{
struct src *psrc = (struct src *)SRC_BASE_ADDR;
/* setup GP timer */
timer_init();
+ /* Enable device tree and early DM support*/
+ spl_early_init();
+
/* UART clocks enabled and gd valid - init serial console */
preloader_console_init();
-
- /* Clear the BSS. */
- memset(__bss_start, 0, __bss_end - __bss_start);
-
- /* load/boot image from boot device */
- board_init_r(NULL, 0);
}
#endif
int board_early_init_f(void)
{
setup_iomux_uart();
+#ifdef CONFIG_FEC_MXC
setup_iomux_fec();
+#endif
return 0;
}
return 0;
}
-void board_boot_order(u32 *spl_boot_list)
-{
- u32 bmode = imx6_src_get_boot_mode();
- u8 boot_dev = BOOT_DEVICE_MMC1;
-
- switch ((bmode & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) {
- case IMX6_BMODE_SD:
- case IMX6_BMODE_ESD:
- boot_dev = BOOT_DEVICE_MMC1;
- break;
- case IMX6_BMODE_MMC:
- case IMX6_BMODE_EMMC:
- boot_dev = BOOT_DEVICE_MMC2;
- break;
- default:
- /* Default - BOOT_DEVICE_MMC1 */
- printf("Wrong board boot order\n");
- break;
- }
-
- spl_boot_list[0] = boot_dev;
-}
#endif /* CONFIG_FSL_ESDHC_IMX */
void board_init_f(ulong dummy)
int checkboard(void)
{
#ifdef CONFIG_TARGET_BK4R1
- puts("Board: BK4r1 (L333)\n");
+ u32 *gpio3_pdir = (u32 *)(GPIO3_BASE_ADDR + 0x10);
+
+ /*
+ * USB_RESET_N (PTC30 - GPIO103 - PORT3[7]):
+ * L333 -> pull up added -> read 1
+ * L320 -> no pull up -> read 0
+ *
+ * Default iomuxc_ptc30 value after reset: 0x300061 -> RCON28
+ * - input enabled, pull (up/down) disabled
+ */
+ if (*gpio3_pdir & BIT(7))
+ puts("Board: BK4r1 (L333)\n");
+ else
+ puts("Board: BK4r1 (L320)\n");
#else
puts("Board: PCM-052\n");
#endif
--- /dev/null
+if TARGET_PICO_IMX6
+
+config SYS_BOARD
+ default "pico-imx6"
+
+config SYS_VENDOR
+ default "technexion"
+
+config SYS_SOC
+ default "mx6"
+
+config SYS_CONFIG_NAME
+ default "pico-imx6"
+
+endif
--- /dev/null
+TECHNEXION PICO-IMX6 BOARD
+M: Fabio Estevam <festevam@gmail.com>
+S: Maintained
+F: arch/arm/dts/imx6qdl-pico.dtsi
+F: arch/arm/dts/imx6q-pico.dts
+F: arch/arm/dts/imx6dl-pico.dts
+F: board/technexion/pico-imx6/
+F: include/configs/pico-imx6.h
+F: configs/pico-imx6_defconfig
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2013 Freescale Semiconductor, Inc.
+
+obj-y := pico-imx6.o spl.o
--- /dev/null
+How to Update U-Boot on pico-imx6q/dl boards
+--------------------------------------------
+
+Required software on the host PC:
+
+- UUU: https://github.com/NXPmicro/mfgtools
+
+Build U-Boot for pico:
+
+$ make mrproper
+$ make pico-imx6_defconfig
+$ make
+
+This generates the SPL and u-boot-dtb.img binaries.
+
+1. Loading U-Boot via USB Serial Download Protocol
+
+Note: This method is convenient for development purposes.
+If the eMMC has already a U-Boot flashed then the user can
+go to step 2 below in order to update U-Boot.
+
+Put pico board in USB download mode (Refer to the following link for details:
+https://www.technexion.com/support/knowledgebase/boot-configuration-settings-for-pico-baseboards/).
+
+Connect a USB to serial adapter between the host PC and pico.
+
+Connect a USB cable between the OTG pico port and the host PC.
+
+Open a terminal program such as minicom.
+
+Copy SPL and u-boot-dtb.img to the uuu folder.
+
+Load the U-Boot via USB:
+
+$ sudo ./uuu -v uuu_script
+
+where uuu_script contains the following:
+
+SDP: boot -f SPL
+SDPU: write -f u-boot-dtb.img -addr 0x10000000
+SDPU: jump -addr 0x10000000
+
+Then U-Boot starts and its messages appear in the console program.
+
+Use the default environment variables:
+
+=> env default -f -a
+=> saveenv
+
+2. Flashing U-Boot into the eMMC
+
+The default U-Boot environment expects the use of eMMC user
+partition. To ensure we are using the proper eMMC partition for boot,
+please run:
+
+=> mmc partconf 0 0 0 0
+
+Next, run the DFU agent so we can flash the new images using dfu-util
+tool:
+
+=> dfu 0 mmc 0
+
+Flash SPL and u-boot-dtb.img into the eMMC running the following commands on a PC:
+
+$ sudo dfu-util -D SPL -a spl
+
+$ sudo dfu-util -D u-boot-dtb.img -a u-boot
+
+Remove power from the pico board.
+
+Put pico board into normal boot mode.
+
+Power up the board and the new updated U-Boot should boot from eMMC.
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2014 O.S. Systems Software LTDA.
+ *
+ * Author: Fabio Estevam <festevam@gmail.com>
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/mach-imx/video.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/io.h>
+#include <linux/sizes.h>
+#include <common.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <phy.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
+#define ETH_PHY_RESET IMX_GPIO_NR(1, 26)
+#define LVDS0_EN IMX_GPIO_NR(2, 8)
+#define LVDS0_BL_EN IMX_GPIO_NR(2, 9)
+
+int dram_init(void)
+{
+ gd->ram_size = imx_ddr_size();
+
+ return 0;
+}
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+ IOMUX_PADS(PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+ IOMUX_PADS(PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+};
+
+static void setup_iomux_uart(void)
+{
+ SETUP_IOMUX_PADS(uart1_pads);
+}
+
+static iomux_v3_cfg_t const lvds_pads[] = {
+ /* lvds */
+ IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT1__GPIO2_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DI0_PIN2__IPU1_DI0_PIN02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_DI0_PIN3__IPU1_DI0_PIN03 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+
+static iomux_v3_cfg_t const enet_pads[] = {
+ IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL |
+ MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK |
+ MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+ /* AR8035 PHY Reset */
+ IOMUX_PADS(PAD_ENET_RXD1__GPIO1_IO26 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+
+static void setup_iomux_enet(void)
+{
+ SETUP_IOMUX_PADS(enet_pads);
+
+ /* Reset AR8031 PHY */
+ gpio_request(ETH_PHY_RESET, "enet_phy_reset");
+ gpio_direction_output(ETH_PHY_RESET, 0);
+ udelay(500);
+ gpio_set_value(ETH_PHY_RESET, 1);
+}
+
+#if defined(CONFIG_VIDEO_IPUV3)
+static iomux_v3_cfg_t const ft5x06_wvga_pads[] = {
+ IOMUX_PADS(PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK),
+ IOMUX_PADS(PAD_DI0_PIN2__IPU1_DI0_PIN02), /* HSync */
+ IOMUX_PADS(PAD_DI0_PIN3__IPU1_DI0_PIN03), /* VSync */
+ IOMUX_PADS(PAD_DI0_PIN4__IPU1_DI0_PIN04 | MUX_PAD_CTRL(PAD_CTL_DSE_120ohm)), /* Contrast */
+ IOMUX_PADS(PAD_DI0_PIN15__IPU1_DI0_PIN15), /* DISP0_DRDY */
+ IOMUX_PADS(PAD_DISP0_DAT0__IPU1_DISP0_DATA00),
+ IOMUX_PADS(PAD_DISP0_DAT1__IPU1_DISP0_DATA01),
+ IOMUX_PADS(PAD_DISP0_DAT2__IPU1_DISP0_DATA02),
+ IOMUX_PADS(PAD_DISP0_DAT3__IPU1_DISP0_DATA03),
+ IOMUX_PADS(PAD_DISP0_DAT4__IPU1_DISP0_DATA04),
+ IOMUX_PADS(PAD_DISP0_DAT5__IPU1_DISP0_DATA05),
+ IOMUX_PADS(PAD_DISP0_DAT6__IPU1_DISP0_DATA06),
+ IOMUX_PADS(PAD_DISP0_DAT7__IPU1_DISP0_DATA07),
+ IOMUX_PADS(PAD_DISP0_DAT8__IPU1_DISP0_DATA08),
+ IOMUX_PADS(PAD_DISP0_DAT9__IPU1_DISP0_DATA09),
+ IOMUX_PADS(PAD_DISP0_DAT10__IPU1_DISP0_DATA10),
+ IOMUX_PADS(PAD_DISP0_DAT11__IPU1_DISP0_DATA11),
+ IOMUX_PADS(PAD_DISP0_DAT12__IPU1_DISP0_DATA12),
+ IOMUX_PADS(PAD_DISP0_DAT13__IPU1_DISP0_DATA13),
+ IOMUX_PADS(PAD_DISP0_DAT14__IPU1_DISP0_DATA14),
+ IOMUX_PADS(PAD_DISP0_DAT15__IPU1_DISP0_DATA15),
+ IOMUX_PADS(PAD_DISP0_DAT16__IPU1_DISP0_DATA16),
+ IOMUX_PADS(PAD_DISP0_DAT17__IPU1_DISP0_DATA17),
+ IOMUX_PADS(PAD_DISP0_DAT18__IPU1_DISP0_DATA18),
+ IOMUX_PADS(PAD_DISP0_DAT19__IPU1_DISP0_DATA19),
+ IOMUX_PADS(PAD_DISP0_DAT20__IPU1_DISP0_DATA20),
+ IOMUX_PADS(PAD_DISP0_DAT21__IPU1_DISP0_DATA21),
+ IOMUX_PADS(PAD_DISP0_DAT22__IPU1_DISP0_DATA22),
+ IOMUX_PADS(PAD_DISP0_DAT23__IPU1_DISP0_DATA23),
+ IOMUX_PADS(PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* DISP0_BKLEN */
+ IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* DISP0_VDDEN */
+};
+
+static void do_enable_hdmi(struct display_info_t const *dev)
+{
+ imx_enable_hdmi_phy();
+}
+
+static void enable_lvds(struct display_info_t const *dev)
+{
+ struct iomuxc *iomux = (struct iomuxc *)
+ IOMUXC_BASE_ADDR;
+
+ /* set CH0 data width to 24bit (IOMUXC_GPR2:5 0=18bit, 1=24bit) */
+ u32 reg = readl(&iomux->gpr[2]);
+ reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT;
+ writel(reg, &iomux->gpr[2]);
+
+ /* Enable Backlight - use GPIO for Brightness adjustment */
+ SETUP_IOMUX_PAD(PAD_SD4_DAT1__GPIO2_IO09);
+ gpio_request(IMX_GPIO_NR(2, 9), "backlight_enable");
+ gpio_direction_output(IMX_GPIO_NR(2, 9), 1);
+
+ gpio_request(IMX_GPIO_NR(2, 8), "brightness");
+ SETUP_IOMUX_PAD(PAD_SD4_DAT0__GPIO2_IO08);
+ gpio_direction_output(IMX_GPIO_NR(2, 8), 1);
+}
+
+static void enable_ft5x06_wvga(struct display_info_t const *dev)
+{
+ SETUP_IOMUX_PADS(ft5x06_wvga_pads);
+
+ gpio_request(IMX_GPIO_NR(2, 10), "parallel_enable");
+ gpio_request(IMX_GPIO_NR(2, 11), "parallel_brightness");
+ gpio_direction_output(IMX_GPIO_NR(2, 10), 1);
+ gpio_direction_output(IMX_GPIO_NR(2, 11), 1);
+}
+
+struct display_info_t const displays[] = {{
+ .bus = 1,
+ .addr = 0x38,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = NULL,
+ .enable = enable_ft5x06_wvga,
+ .mode = {
+ .name = "FT5x06-WVGA",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 30303,
+ .left_margin = 45,
+ .right_margin = 210,
+ .upper_margin = 22,
+ .lower_margin = 22,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = NULL,
+ .enable = enable_lvds,
+ .mode = {
+ .name = "hj070na",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 600,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = detect_hdmi,
+ .enable = do_enable_hdmi,
+ .mode = {
+ .name = "HDMI",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} } };
+size_t display_count = ARRAY_SIZE(displays);
+
+static void setup_display(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ int reg;
+
+ /* Setup HSYNC, VSYNC, DISP_CLK for debugging purposes */
+ SETUP_IOMUX_PADS(lvds_pads);
+ gpio_request(LVDS0_EN, "lvds0_enable");
+ gpio_request(LVDS0_BL_EN, "lvds0_bl_enable");
+ gpio_direction_output(LVDS0_EN, 1);
+ gpio_direction_output(LVDS0_BL_EN, 1);
+
+ enable_ipu_clock();
+ imx_setup_hdmi();
+
+ reg = __raw_readl(&mxc_ccm->CCGR3);
+ reg |= MXC_CCM_CCGR3_LDB_DI0_MASK | MXC_CCM_CCGR3_LDB_DI1_MASK;
+ writel(reg, &mxc_ccm->CCGR3);
+
+ /* set LDB0, LDB1 clk select to 011/011 */
+ reg = readl(&mxc_ccm->cs2cdr);
+ reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
+ | MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
+ reg |= (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
+ | (3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->cs2cdr);
+
+ reg = readl(&mxc_ccm->cscmr2);
+ reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV | MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV;
+ writel(reg, &mxc_ccm->cscmr2);
+
+ reg = readl(&mxc_ccm->chsccdr);
+ reg |= (CHSCCDR_CLK_SEL_LDB_DI0
+ << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
+ reg |= (CHSCCDR_CLK_SEL_LDB_DI0
+ << MXC_CCM_CHSCCDR_IPU1_DI1_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->chsccdr);
+
+ reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
+ | IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW
+ | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
+ | IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
+ | IOMUXC_GPR2_DATA_WIDTH_CH1_24BIT
+ | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
+ | IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT
+ | IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0
+ | IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
+ writel(reg, &iomux->gpr[2]);
+ reg = readl(&iomux->gpr[3]);
+
+ reg = (reg & ~(IOMUXC_GPR3_LVDS0_MUX_CTL_MASK
+ | IOMUXC_GPR3_HDMI_MUX_CTL_MASK))
+ | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
+ << IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
+
+ writel(reg, &iomux->gpr[3]);
+}
+#endif /* CONFIG_VIDEO_IPUV3 */
+
+int board_early_init_f(void)
+{
+ setup_iomux_uart();
+
+#if defined(CONFIG_VIDEO_IPUV3)
+ setup_display();
+#endif
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ setup_iomux_enet();
+
+ return cpu_eth_init(bis);
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+ unsigned short val;
+
+ /* To enable AR8035 ouput a 125MHz clk from CLK_25M */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
+
+ val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
+ val &= 0xffe7;
+ val |= 0x18;
+ phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
+
+ /* introduce tx clock delay */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
+ val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
+ val |= 0x0100;
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
+
+ if (phydev->drv->config)
+ phydev->drv->config(phydev);
+
+ return 0;
+}
+
+int overwrite_console(void)
+{
+ return 1;
+}
+
+int board_late_init(void)
+{
+ if (is_mx6dq())
+ env_set("board_rev", "MX6Q");
+ else
+ env_set("board_rev", "MX6DL");
+
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: PICO-IMX6\n");
+
+ return 0;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Technexion Ltd.
+ *
+ * Author: Richard Hu <richard.hu@technexion.com>
+ * Fabio Estevam <festevam@gmail.com>
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <linux/errno.h>
+#include <asm/gpio.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/video.h>
+#include <mmc.h>
+#include <fsl_esdhc_imx.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <spl.h>
+
+#if defined(CONFIG_SPL_BUILD)
+#include <asm/arch/mx6-ddr.h>
+
+#define IMX6DQ_DRIVE_STRENGTH 0x30
+#define IMX6SDL_DRIVE_STRENGTH 0x28
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+ /* Break into full U-Boot on 'c' */
+ if (serial_tstc() && serial_getc() == 'c')
+ return 1;
+
+ return 0;
+}
+#endif
+
+/* configure MX6Q/DUAL mmdc DDR io registers */
+static struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
+ .dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_cas = IMX6DQ_DRIVE_STRENGTH,
+ .dram_ras = IMX6DQ_DRIVE_STRENGTH,
+ .dram_reset = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdcke0 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdcke1 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdba2 = 0x00000000,
+ .dram_sdodt0 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdqs2 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdqs3 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdqs4 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdqs5 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdqs6 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_sdqs7 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_dqm0 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_dqm1 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_dqm2 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_dqm3 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_dqm4 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_dqm5 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_dqm6 = IMX6DQ_DRIVE_STRENGTH,
+ .dram_dqm7 = IMX6DQ_DRIVE_STRENGTH,
+};
+
+/* configure MX6Q/DUAL mmdc GRP io registers */
+static struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
+ .grp_ddr_type = 0x000c0000,
+ .grp_ddrmode_ctl = 0x00020000,
+ .grp_ddrpke = 0x00000000,
+ .grp_addds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_ctlds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_ddrmode = 0x00020000,
+ .grp_b0ds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_b1ds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_b2ds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_b3ds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_b4ds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_b5ds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_b6ds = IMX6DQ_DRIVE_STRENGTH,
+ .grp_b7ds = IMX6DQ_DRIVE_STRENGTH,
+};
+
+/* configure MX6SOLO/DUALLITE mmdc DDR io registers */
+struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
+ .dram_sdclk_0 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdclk_1 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_cas = IMX6SDL_DRIVE_STRENGTH,
+ .dram_ras = IMX6SDL_DRIVE_STRENGTH,
+ .dram_reset = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdcke0 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdcke1 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdba2 = 0x00000000,
+ .dram_sdodt0 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdodt1 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdqs0 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdqs1 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdqs2 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdqs3 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdqs4 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdqs5 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdqs6 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_sdqs7 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_dqm0 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_dqm1 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_dqm2 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_dqm3 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_dqm4 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_dqm5 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_dqm6 = IMX6SDL_DRIVE_STRENGTH,
+ .dram_dqm7 = IMX6SDL_DRIVE_STRENGTH,
+};
+
+/* configure MX6SOLO/DUALLITE mmdc GRP io registers */
+struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
+ .grp_ddr_type = 0x000c0000,
+ .grp_ddrmode_ctl = 0x00020000,
+ .grp_ddrpke = 0x00000000,
+ .grp_addds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_ctlds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_ddrmode = 0x00020000,
+ .grp_b0ds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_b1ds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_b2ds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_b3ds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_b4ds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_b5ds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_b6ds = IMX6SDL_DRIVE_STRENGTH,
+ .grp_b7ds = IMX6SDL_DRIVE_STRENGTH,
+};
+
+/* H5T04G63AFR-PB for i.mx6Solo/DL operating DDR at 400MHz */
+static struct mx6_ddr3_cfg h5t04g63afr = {
+ .mem_speed = 800,
+ .density = 4,
+ .width = 16,
+ .banks = 8,
+ .rowaddr = 15,
+ .coladdr = 10,
+ .pagesz = 2,
+ .trcd = 1500,
+ .trcmin = 5250,
+ .trasmin = 3750,
+};
+
+/* H5TQ2G63FFR-H9 for i.mx6Solo/DL operating DDR at 400MHz */
+static struct mx6_ddr3_cfg h5tq2g63ffr = {
+ .mem_speed = 800,
+ .density = 2,
+ .width = 16,
+ .banks = 8,
+ .rowaddr = 14,
+ .coladdr = 10,
+ .pagesz = 2,
+ .trcd = 1500,
+ .trcmin = 5250,
+ .trasmin = 3750,
+};
+
+static struct mx6_mmdc_calibration mx6q_1g_mmdc_calib = {
+ .p0_mpwldectrl0 = 0x00000000,
+ .p0_mpwldectrl1 = 0x00000000,
+ .p1_mpwldectrl0 = 0x00000000,
+ .p1_mpwldectrl1 = 0x00000000,
+ .p0_mpdgctrl0 = 0x032C0340,
+ .p0_mpdgctrl1 = 0x03300324,
+ .p1_mpdgctrl0 = 0x032C0338,
+ .p1_mpdgctrl1 = 0x03300274,
+ .p0_mprddlctl = 0x423A383E,
+ .p1_mprddlctl = 0x3638323E,
+ .p0_mpwrdlctl = 0x363C4640,
+ .p1_mpwrdlctl = 0x4034423C,
+};
+
+/* DDR 32bit */
+static struct mx6_ddr_sysinfo mem_s = {
+ .dsize = 1,
+ .cs1_mirror = 0,
+ /* config for full 4GB range so that get_mem_size() works */
+ .cs_density = 32,
+ .ncs = 1,
+ .bi_on = 1,
+ .rtt_nom = 1,
+ .rtt_wr = 0,
+ .ralat = 5,
+ .walat = 0,
+ .mif3_mode = 3,
+ .rst_to_cke = 0x23,
+ .sde_to_rst = 0x10,
+};
+
+static struct mx6_mmdc_calibration mx6dl_1g_mmdc_calib = {
+ .p0_mpwldectrl0 = 0x001f001f,
+ .p0_mpwldectrl1 = 0x001f001f,
+ .p1_mpwldectrl0 = 0x001f001f,
+ .p1_mpwldectrl1 = 0x001f001f,
+ .p0_mpdgctrl0 = 0x420e020e,
+ .p0_mpdgctrl1 = 0x02000200,
+ .p1_mpdgctrl0 = 0x42020202,
+ .p1_mpdgctrl1 = 0x01720172,
+ .p0_mprddlctl = 0x494c4f4c,
+ .p1_mprddlctl = 0x4a4c4c49,
+ .p0_mpwrdlctl = 0x3f3f3133,
+ .p1_mpwrdlctl = 0x39373f2e,
+};
+
+static struct mx6_mmdc_calibration mx6s_512m_mmdc_calib = {
+ .p0_mpwldectrl0 = 0x0040003c,
+ .p0_mpwldectrl1 = 0x0032003e,
+ .p0_mpdgctrl0 = 0x42350231,
+ .p0_mpdgctrl1 = 0x021a0218,
+ .p0_mprddlctl = 0x4b4b4e49,
+ .p0_mpwrdlctl = 0x3f3f3035,
+};
+
+static void ccgr_init(void)
+{
+ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+ writel(0x00C03F3F, &ccm->CCGR0);
+ writel(0x0030FC03, &ccm->CCGR1);
+ writel(0x0FFFC000, &ccm->CCGR2);
+ writel(0x3FF03000, &ccm->CCGR3);
+ writel(0x00FFF300, &ccm->CCGR4);
+ writel(0x0F0000C3, &ccm->CCGR5);
+ writel(0x000003FF, &ccm->CCGR6);
+}
+
+static void spl_dram_init(void)
+{
+ if (is_mx6solo()) {
+ mx6sdl_dram_iocfg(32, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
+ mx6_dram_cfg(&mem_s, &mx6s_512m_mmdc_calib, &h5tq2g63ffr);
+ } else if (is_mx6dl()) {
+ mx6sdl_dram_iocfg(32, &mx6sdl_ddr_ioregs, &mx6sdl_grp_ioregs);
+ mx6_dram_cfg(&mem_s, &mx6dl_1g_mmdc_calib, &h5t04g63afr);
+ } else if (is_mx6dq()) {
+ mx6dq_dram_iocfg(32, &mx6dq_ddr_ioregs, &mx6dq_grp_ioregs);
+ mx6_dram_cfg(&mem_s, &mx6q_1g_mmdc_calib, &h5t04g63afr);
+ }
+
+ udelay(100);
+}
+
+void board_init_f(ulong dummy)
+{
+ ccgr_init();
+
+ /* setup AIPS and disable watchdog */
+ arch_cpu_init();
+
+ gpr_init();
+
+ /* iomux */
+ board_early_init_f();
+
+ /* setup GP timer */
+ timer_init();
+
+ /* UART clocks enabled and gd valid - init serial console */
+ preloader_console_init();
+
+ /* DDR initialization */
+ spl_dram_init();
+}
+
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+static struct fsl_esdhc_cfg usdhc_cfg[1] = {
+ {USDHC3_BASE_ADDR},
+};
+
+static iomux_v3_cfg_t const usdhc3_pads[] = {
+ IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+ /* SOM MicroSD Card Detect */
+ IOMUX_PADS(PAD_EIM_DA9__GPIO3_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ return 1;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ SETUP_IOMUX_PADS(usdhc3_pads);
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+}
+#endif
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ if (is_mx6dq() && !strcmp(name, "imx6q-pico"))
+ return 0;
+ else if ((is_mx6dl() || is_mx6solo()) && !strcmp(name, "imx6dl-pico"))
+ return 0;
+
+ return -EINVAL;
+}
+#endif
just for an example. In order to boot faster the user should customize the
defconfig by only enabling the minimal required drivers).
-$ make -j4 uImage LOADADDR=0x80800000
+$ make -j4 uImage LOADADDR=0x80008000
$ cp arch/arm/boot/uImage /tftpboot
$ cp arch/arm/boot/dts/imx6ul-pico-hobbit.dtb /tftpboot
=> tftp ${loadaddr} uImage
Write the kernel at 2MB offset:
-=> mmc write ${loadaddr} 0x1000 0x4000
+=> mmc write ${loadaddr} 0x1000 0x5000
Setup the bootargs:
=> setenv bootargs 'console=ttymxc5,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rw'
Image Name: Linux-4.19.0-rc2-next-20180905-0
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 8365608 Bytes = 8 MiB
- Load Address: 80800000
- Entry Point: 80800000
+ Load Address: 80008000
+ Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
#define ENET_CLK_PAD_CTRL (PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
+ PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm)
+
#define RMII_PHY_RESET IMX_GPIO_NR(1, 28)
static iomux_v3_cfg_t const fec_pads[] = {
return 0;
}
+#ifdef CONFIG_VIDEO_MXS
+static iomux_v3_cfg_t const lcd_pads[] = {
+ MX6_PAD_LCD_CLK__LCDIF_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_ENABLE__LCDIF_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_HSYNC__LCDIF_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_VSYNC__LCDIF_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA00__LCDIF_DATA00 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA01__LCDIF_DATA01 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA02__LCDIF_DATA02 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA03__LCDIF_DATA03 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA04__LCDIF_DATA04 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA05__LCDIF_DATA05 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA06__LCDIF_DATA06 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA07__LCDIF_DATA07 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA08__LCDIF_DATA08 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA09__LCDIF_DATA09 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA10__LCDIF_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA11__LCDIF_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA12__LCDIF_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA13__LCDIF_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA14__LCDIF_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA15__LCDIF_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA16__LCDIF_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA17__LCDIF_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA18__LCDIF_DATA18 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA19__LCDIF_DATA19 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA20__LCDIF_DATA20 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA21__LCDIF_DATA21 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA22__LCDIF_DATA22 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD_DATA23__LCDIF_DATA23 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ /* LCD_BLT_CTRL: GPIO for Brightness adjustment */
+ MX6_PAD_NAND_ALE__GPIO4_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* LCD_VDD_EN: LCD enabled */
+ MX6_PAD_JTAG_TMS__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+void setup_lcd(void)
+{
+ imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
+ gpio_request(IMX_GPIO_NR(4, 10), "lcd_brightness");
+ gpio_request(IMX_GPIO_NR(1, 11), "lcd_enable");
+ /* Set Brightness to high */
+ gpio_direction_output(IMX_GPIO_NR(4, 10) , 1);
+ /* Set LCD enable to high */
+ gpio_direction_output(IMX_GPIO_NR(1, 11) , 1);
+}
+#endif
+
int board_phy_config(struct phy_device *phydev)
{
phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x8190);
setup_fec();
setup_usb();
-
+#ifdef CONFIG_VIDEO_MXS
+ setup_lcd();
+#endif
return 0;
}
#ifdef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
{
+ /* Break into full U-Boot on 'c' */
+ if (serial_tstc() && serial_getc() == 'c')
+ return 1;
+
return 0;
}
#endif
F: configs/pico-imx7d_bl33_defconfig
F: configs/pico-hobbit-imx7d_defconfig
F: configs/pico-pi-imx7d_defconfig
+F: configs/pico-nymph-imx7d_defconfig
+F: configs/pico-dwarf-imx7d_defconfig
Put pico board into normal boot mode.
Power up the board and the new updated U-Boot should boot from eMMC.
+
+Booting in Falcon mode
+======================
+
+Generate a uImage kernel:
+
+$ make imx_v6_v7_defconfig (Using the default imx_v6_v7_defconfig configuration
+just for an example. In order to boot faster the user should customize the
+defconfig by only enabling the minimal required drivers).
+
+$ make -j4 uImage LOADADDR=0x80008000
+
+$ cp arch/arm/boot/uImage /tftpboot
+$ cp arch/arm/boot/dts/imx7d-pico-pi.dtb /tftpboot
+
+In the U-Boot prompt:
+
+Setup the server and board IP addresses:
+=> setenv serverip 192.168.0.10
+=> setenv ipaddr 192.168.0.11
+
+Get the dtb file:
+=> tftp ${fdt_addr} imx7d-pico-pi.dtb
+
+Get the kernel:
+=> tftp ${loadaddr} uImage
+
+Write the kernel at 2MB offset:
+=> mmc write ${loadaddr} 0x1000 0x5000
+
+Setup the bootargs:
+=> setenv bootargs 'console=ttymxc4,115200 root=/dev/mmcblk2p1 rootfstype=ext4 rootwait rw'
+
+Prepare args:
+=> spl export fdt ${loadaddr} - ${fdt_addr}
+## Booting kernel from Legacy Image at 80800000 ...
+ Image Name: Linux-5.2.14
+ Image Type: ARM Linux Kernel Image (uncompressed)
+ Data Size: 9077544 Bytes = 8.7 MiB
+ Load Address: 80008000
+ Entry Point: 80008000
+ Verifying Checksum ... OK
+## Flattened Device Tree blob at 83000000
+ Booting using the fdt blob at 0x83000000
+ Loading Kernel Image
+ Using Device Tree in place at 83000000, end 8300b615
+subcommand not supported
+subcommand not supported
+ Using Device Tree in place at 83000000, end 8300e615
+Argument image is now in RAM: 0x83000000
+=>
+
+Write 1MB of args data (0x800 sectors) to 1MB offset (0x800 sectors):
+
+=> mmc write ${fdt_addr} 0x800 0x800
+
+In order to boot with Falcon mode, activate the CONFIG_SPL_OS_BOOT
+option in the defconfig
+
+--- a/configs/pico-imx7d_defconfig
++++ b/configs/pico-imx7d_defconfig
+@@ -67,3 +67,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+ CONFIG_CI_UDC=y
+ CONFIG_VIDEO=y
++CONFIG_SPL_OS_BOOT=y
+
+Then rebuild U-Boot:
+
+$ make pico-imx7d_defconfig
+$ make -j4
+
+Launch UMS:
+=> ums 0 mmc 0
+
+Flash the new binaries:
+
+$ sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync
+$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1k seek=69; sync
+
+And then SPL binary will load and jump directly to the kernel:
+
+U-Boot SPL 2019.10-rc3-00284-g001c8ea94a-dirty (Sep 10 2019 - 12:46:01 -0300)
+Trying to boot from MMC1
+[ 0.000000] Booting Linux on physical CPU 0x0
+[ 0.000000] Linux version 5.2.14 (fabio@fabio-OptiPlex-7010) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1)) #30 SMP Wed Sep 10 12:36:27 -03 2019
+[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
+[ 0.000000] CPU: div instructions available: patching division code
+[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
+[ 0.000000] OF: fdt: Machine model: TechNexion PICO-IMX7D Board and PI baseboard
+...
#define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM)
-
-#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
- PAD_CTL_DSE_3P3V_49OHM)
-
-#define LCD_SYNC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
- PAD_CTL_DSE_3P3V_196OHM)
-
#ifdef CONFIG_SYS_I2C_MXC
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
return 0;
}
-#ifdef CONFIG_VIDEO_MXS
-static iomux_v3_cfg_t const lcd_pads[] = {
- MX7D_PAD_LCD_CLK__LCD_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_ENABLE__LCD_ENABLE | MUX_PAD_CTRL(LCD_SYNC_PAD_CTRL),
- MX7D_PAD_LCD_HSYNC__LCD_HSYNC | MUX_PAD_CTRL(LCD_SYNC_PAD_CTRL),
- MX7D_PAD_LCD_VSYNC__LCD_VSYNC | MUX_PAD_CTRL(LCD_SYNC_PAD_CTRL),
- MX7D_PAD_LCD_DATA00__LCD_DATA0 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA01__LCD_DATA1 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA02__LCD_DATA2 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA03__LCD_DATA3 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA04__LCD_DATA4 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA05__LCD_DATA5 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA06__LCD_DATA6 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA07__LCD_DATA7 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA08__LCD_DATA8 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA09__LCD_DATA9 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA10__LCD_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA11__LCD_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA12__LCD_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA13__LCD_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA14__LCD_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA15__LCD_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA16__LCD_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA17__LCD_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA18__LCD_DATA18 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA19__LCD_DATA19 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA20__LCD_DATA20 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA21__LCD_DATA21 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA22__LCD_DATA22 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_LCD_DATA23__LCD_DATA23 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_GPIO1_IO06__GPIO1_IO6 | MUX_PAD_CTRL(LCD_PAD_CTRL),
- MX7D_PAD_GPIO1_IO11__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
+#ifdef CONFIG_DM_VIDEO
void setup_lcd(void)
{
- imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
gpio_request(IMX_GPIO_NR(1, 11), "lcd_brightness");
gpio_request(IMX_GPIO_NR(1, 6), "lcd_enable");
/* Set Brightness to high */
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-#ifdef CONFIG_VIDEO_MXS
+#ifdef CONFIG_DM_VIDEO
+
setup_lcd();
+
#endif
#ifdef CONFIG_FEC_MXC
setup_fec();
#ifdef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
{
+ /* Break into full U-Boot on 'c' */
+ if (serial_tstc() && serial_getc() == 'c')
+ return 1;
+
return 0;
}
#endif
MX6_PAD_CSI0_DAT11__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-#if defined(CONFIG_FSL_ESDHC) && defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_SPL_BUILD)
/* Apalis MMC1 */
iomux_v3_cfg_t const usdhc1_pads[] = {
MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
}
#endif
-#if defined(CONFIG_FSL_ESDHC) && defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_FSL_ESDHC_IMX) && defined(CONFIG_SPL_BUILD)
/* use the following sequence: eMMC, MMC1, SD1 */
struct fsl_esdhc_cfg usdhc_cfg[CONFIG_SYS_FSL_USDHC_NUM] = {
{USDHC3_BASE_ADDR},
board_init_r(NULL, 0);
}
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+ if (!strcmp(name, "imx6-apalis"))
+ return 0;
+
+ return -1;
+}
+#endif
+
void reset_cpu(ulong addr)
{
}
/*
* Secure boot support
*/
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
/*
* Secure boot support
*/
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
};
static iomux_v3_cfg_t const enet_pads[] = {
- IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
/* AR8031 PHY Reset */
IOMUX_PADS(PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
}
#endif /* CONFIG_VIDEO_IPUV3 */
-int board_eth_init(bd_t *bis)
-{
- setup_iomux_enet();
-
- return cpu_eth_init(bis);
-}
-
int board_early_init_f(void)
{
setup_iomux_uart();
else
env_set("board_name", "B1");
#endif
+ setup_iomux_enet();
return 0;
}
/*
* Secure boot support
*/
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG__IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#include <config.h>
IMAGE_VERSION 2
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
*/
clrsetbits_le16(&wdog->wcr, 0, 0x10);
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
/* Determine HAB state */
env_set_ulong(HAB_ENABLED_ENVNAME, imx_hab_is_enabled());
#else
#endif /* !USE_HOSTCC*/
#include <u-boot/crc.h>
+#include <imximage.h>
#ifndef CONFIG_SYS_BARGSIZE
#define CONFIG_SYS_BARGSIZE 512
}
} else if (image_check_type(hdr, IH_TYPE_FIRMWARE_IVT)) {
printf("HAB Blocks: 0x%08x 0x0000 0x%08x\n",
- image_get_load(hdr) - image_get_header_size(),
- image_get_size(hdr) + image_get_header_size()
- - 0x1FE0);
+ image_get_load(hdr) - image_get_header_size(),
+ (int)(image_get_size(hdr) + image_get_header_size()
+ + sizeof(flash_header_v2_t) - 0x2060));
}
}
config SPL_SIZE_LIMIT
hex "Maximum size of SPL image"
depends on SPL
- default 69632 if ARCH_MX6
+ default 69632 if ARCH_MX6 && !MX6_OCRAM_256KB
+ default 200704 if ARCH_MX6 && MX6_OCRAM_256KB
default 0
help
Specifies the maximum length of the U-Boot SPL image.
this option to build the drivers in drivers/mmc as part of an SPL
build.
+config SPL_FORCE_MMC_BOOT
+ bool "Force SPL booting from MMC"
+ depends on SPL_MMC_SUPPORT
+ default n
+ help
+ Force SPL to use MMC device for Linux kernel booting even when the
+ SoC ROM recognized boot medium is not eMMC/SD. This is crucial for
+ factory or 'falcon mode' booting.
+
config SPL_MMC_TINY
bool "Tiny MMC framework in SPL"
depends on SPL_MMC_SUPPORT
#include <common.h>
#include <spl.h>
-__weak void board_return_to_bootrom(void)
+__weak int board_return_to_bootrom(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev)
{
+ return 0;
}
static int spl_return_to_bootrom(struct spl_image_info *spl_image,
* the ROM), it will implement board_return_to_bootrom() and
* should not return from it.
*/
- board_return_to_bootrom();
- return false;
+ return board_return_to_bootrom(spl_image, bootdev);
}
SPL_LOAD_IMAGE_METHOD("BOOTROM", 0, BOOT_DEVICE_BOOTROM, spl_return_to_bootrom);
spl_image->flags |= SPL_FIT_FOUND;
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_IMX_HAB
board_spl_fit_post_load((ulong)fit, size);
#endif
load.bl_len = mmc->read_bl_len;
load.read = h_spl_load_read;
ret = spl_load_simple_fit(spl_image, &load, sector, header);
+ } else if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER)) {
+ struct spl_load_info load;
+
+ load.dev = mmc;
+ load.priv = NULL;
+ load.filename = NULL;
+ load.bl_len = mmc->read_bl_len;
+ load.read = h_spl_load_read;
+
+ ret = spl_load_imx_container(spl_image, &load, sector);
} else {
ret = mmc_load_legacy(spl_image, mmc, sector, header);
}
}
#endif
+unsigned long __weak spl_mmc_get_uboot_raw_sector(struct mmc *mmc)
+{
+#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
+ return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR;
+#else
+ return 0;
+#endif
+}
+
int spl_mmc_load(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev,
const char *filename,
}
}
+ raw_sect = spl_mmc_get_uboot_raw_sector(mmc);
+
boot_mode = spl_boot_mode(bootdev->boot_device);
err = -EINVAL;
switch (boot_mode) {
#include <linux/libfdt_env.h>
#include <fdt.h>
+uint32_t __weak spl_nand_get_uboot_raw_page(void)
+{
+ return CONFIG_SYS_NAND_U_BOOT_OFFS;
+}
+
#if defined(CONFIG_SPL_NAND_RAW_ONLY)
static int spl_nand_load_image(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
CONFIG_SYS_NAND_U_BOOT_DST);
- nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
+ nand_spl_load_image(spl_nand_get_uboot_raw_page(),
CONFIG_SYS_NAND_U_BOOT_SIZE,
(void *)CONFIG_SYS_NAND_U_BOOT_DST);
spl_set_header_raw_uboot(spl_image);
load.bl_len = 1;
load.read = spl_nand_fit_read;
return spl_load_simple_fit(spl_image, &load, offset, header);
+ } else if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER)) {
+ struct spl_load_info load;
+
+ load.dev = NULL;
+ load.priv = NULL;
+ load.filename = NULL;
+ load.bl_len = 1;
+ load.read = spl_nand_fit_read;
+ return spl_load_imx_container(spl_image, &load, offset);
} else {
err = spl_parse_image_header(spl_image, header);
if (err)
#endif
#endif
/* Load u-boot */
- err = spl_nand_load_element(spl_image, CONFIG_SYS_NAND_U_BOOT_OFFS,
+ err = spl_nand_load_element(spl_image, spl_nand_get_uboot_raw_page(),
header);
#ifdef CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND
#if CONFIG_SYS_NAND_U_BOOT_OFFS != CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND
#include <common.h>
#include <spl.h>
-#ifdef CONFIG_SPL_LOAD_FIT
static ulong spl_nor_load_read(struct spl_load_info *load, ulong sector,
ulong count, void *buf)
{
return count;
}
-#endif
+
+unsigned long __weak spl_nor_get_uboot_base(void)
+{
+ return CONFIG_SYS_UBOOT_BASE;
+}
static int spl_nor_load_image(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
* defined location in SDRAM
*/
#ifdef CONFIG_SPL_LOAD_FIT
- header = (const struct image_header *)CONFIG_SYS_UBOOT_BASE;
+ header = (const struct image_header *)spl_nor_get_uboot_base();
if (image_get_magic(header) == FDT_MAGIC) {
debug("Found FIT format U-Boot\n");
load.bl_len = 1;
load.read = spl_nor_load_read;
ret = spl_load_simple_fit(spl_image, &load,
- CONFIG_SYS_UBOOT_BASE,
+ spl_nor_get_uboot_base(),
(void *)header);
return ret;
}
#endif
+ if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER)) {
+ load.bl_len = 1;
+ load.read = spl_nor_load_read;
+ return spl_load_imx_container(spl_image, &load,
+ spl_nor_get_uboot_base());
+ }
+
ret = spl_parse_image_header(spl_image,
- (const struct image_header *)CONFIG_SYS_UBOOT_BASE);
+ (const struct image_header *)spl_nor_get_uboot_base());
if (ret)
return ret;
memcpy((void *)(unsigned long)spl_image->load_addr,
- (void *)(CONFIG_SYS_UBOOT_BASE + sizeof(struct image_header)),
+ (void *)(spl_nor_get_uboot_base() + sizeof(struct image_header)),
spl_image->size);
return 0;
else
return 0;
}
+
+unsigned int __weak spl_spi_get_uboot_offs(struct spi_flash *flash)
+{
+ return CONFIG_SYS_SPI_U_BOOT_OFFS;
+}
+
/*
* The main entry for SPI booting. It's necessary that SDRAM is already
* configured and available since this code loads the main U-Boot image
struct spl_boot_device *bootdev)
{
int err = 0;
- unsigned payload_offs = CONFIG_SYS_SPI_U_BOOT_OFFS;
+ unsigned int payload_offs;
struct spi_flash *flash;
struct image_header *header;
return -ENODEV;
}
+ payload_offs = spl_spi_get_uboot_offs(flash);
+
header = spl_get_load_buffer(-sizeof(*header), sizeof(*header));
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
err = spl_load_simple_fit(spl_image, &load,
payload_offs,
header);
+ } else if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER)) {
+ struct spl_load_info load;
+
+ load.dev = flash;
+ load.priv = NULL;
+ load.filename = NULL;
+ load.bl_len = 1;
+ load.read = spl_spi_fit_read;
+
+ err = spl_load_imx_container(spl_image, &load,
+ payload_offs);
} else {
err = spl_parse_image_header(spl_image, header);
if (err)
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_MX7=y
CONFIG_SYS_TEXT_BASE=0x87800000
-CONFIG_SECURE_BOOT=y
+CONFIG_IMX_HAB=y
CONFIG_TARGET_COLIBRI_IMX7=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_IMX_RDC=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_MX7=y
CONFIG_SYS_TEXT_BASE=0x87800000
-CONFIG_SECURE_BOOT=y
+CONFIG_IMX_HAB=y
CONFIG_TARGET_COLIBRI_IMX7=y
CONFIG_TARGET_COLIBRI_IMX7_EMMC=y
CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
+# CONFIG_CMD_PINMUX is not set
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
+CONFIG_CMD_WDT=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0x2
+CONFIG_SYS_I2C_MXC=y
+CONFIG_SYS_I2C_MXC_I2C1=y
+CONFIG_SYS_I2C_MXC_I2C2=y
+CONFIG_SYS_I2C_MXC_I2C3=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
+CONFIG_SYS_I2C_EEPROM_BUS=2
+CONFIG_SYS_EEPROM_SIZE=32768
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_MTD_DEVICE=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=50000000
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MTD=y
CONFIG_PHYLIB=y
CONFIG_PHY_MARVELL=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
CONFIG_MXC_UART=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_WATCHDOG_TIMEOUT_MSECS=15000
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_I2C_EDID=y
CONFIG_IMX_WATCHDOG=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x1000
+CONFIG_MX6_DDRCAL=y
CONFIG_TARGET_DISPLAY5=y
+CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
CONFIG_BOOTDELAY=3
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_WDT=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_MTDPARTS_DEFAULT="mtdparts=02008000.spi.1:128k(SPL),1m(u-boot),64k(env1),64k(env2),4m(swu-kernel),16m(swu-initramfs),1m(factory),-(reserved)"
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-display5"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_DFU_MMC=y
CONFIG_DFU_SF=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0x2
+CONFIG_SYS_I2C_MXC=y
+CONFIG_SYS_I2C_MXC_I2C1=y
+CONFIG_SYS_I2C_MXC_I2C2=y
+CONFIG_SYS_I2C_MXC_I2C3=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
+CONFIG_SYS_I2C_EEPROM_BUS=2
+CONFIG_SYS_EEPROM_SIZE=32768
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_MTD_DEVICE=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_BUS=1
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=50000000
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MTD=y
CONFIG_PHYLIB=y
+CONFIG_PHY_MARVELL=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
CONFIG_MXC_UART=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Liebherr"
-CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
-CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_WATCHDOG_TIMEOUT_MSECS=15000
+CONFIG_I2C_EDID=y
CONFIG_IMX_WATCHDOG=y
-CONFIG_OF_LIBFDT=y
+CONFIG_PANIC_HANG=y
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_SECURE_BOOT=y
+CONFIG_IMX_HAB=y
CONFIG_TARGET_MX6DL_MAMOJ=y
CONFIG_NR_DRAM_BANKS=1
+CONFIG_CSF_SIZE=0x2060
# CONFIG_CMD_BMODE is not set
CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_DM_REGULATOR_PFUZE100=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
CONFIG_USB=y
CONFIG_DM_USB=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_SPL_SYS_ICACHE_OFF=y
+CONFIG_SPL_SYS_DCACHE_OFF=y
+CONFIG_ARCH_IMX8M=y
+CONFIG_SYS_TEXT_BASE=0x40200000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x10000
+CONFIG_TARGET_IMX8MM_EVK=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg"
+CONFIG_DEFAULT_FDT_FILE="fsl-imx8mm-evk.dtb"
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_TEXT_BASE=0x7E1000
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="u-boot=> "
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_CLK=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx8mm-evk"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_CLK_COMPOSITE_CCF=y
+CONFIG_CLK_COMPOSITE_CCF=y
+CONFIG_SPL_CLK_IMX8MM=y
+CONFIG_CLK_IMX8MM=y
+CONFIG_DM_GPIO=y
+CONFIG_MXC_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_SYS_I2C_MXC_I2C1=y
+CONFIG_SYS_I2C_MXC_I2C2=y
+CONFIG_SYS_I2C_MXC_I2C3=y
+CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_FSL_ESDHC_IMX=y
+CONFIG_PHYLIB=y
+CONFIG_DM_ETH=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX8M=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_MXC_UART=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_DM_THERMAL=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_SPL_TEXT_BASE=0x7E1000
+CONFIG_CSF_SIZE=0x2000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_DM_ETH=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX8M=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX8M_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RESET=y
CONFIG_DM_THERMAL=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qm_mek/uboot-container.cfg"
CONFIG_TARGET_IMX8QM_MEK=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=3
CONFIG_SPL=y
-CONFIG_FIT=y
-CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx8qm_mek/imximage.cfg"
CONFIG_BOOTDELAY=3
CONFIG_LOG=y
CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SPL_POWER_DOMAIN=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_CMD_IMPORTENV is not set
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qxp_mek/uboot-container.cfg"
CONFIG_TARGET_IMX8QXP_MEK=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=3
CONFIG_SPL=y
-CONFIG_FIT=y
-CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx8qxp_mek/imximage.cfg"
CONFIG_BOOTDELAY=3
CONFIG_LOG=y
CONFIG_TARGET_NITROGEN6X=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_CMD_HDMIDETECT=y
+CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_SYS_MALLOC_F is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,SABRELITE"
CONFIG_BOOTDELAY=3
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT4_WRITE=y
# CONFIG_ISO_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabrelite"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_FSL_USDHC=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=25000000
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
CONFIG_DM_THERMAL=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_KEYBOARD=y
CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
CONFIG_USB_GADGET=y
CONFIG_VIDEO_IPUV3=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_FIT_IMAGE_TINY=y
-CONFIG_SPL_FS_EXT4=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_USB_HOST_SUPPORT=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_USB_SDP_SUPPORT=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
CONFIG_FSL_USDHC=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
CONFIG_DM_THERMAL=y
CONFIG_USB=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
CONFIG_FSL_USDHC=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
CONFIG_DM_THERMAL=y
CONFIG_USB=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
CONFIG_FSL_USDHC=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
CONFIG_DM_THERMAL=y
CONFIG_USB=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_TARGET_MX6ULL_14X14_EVK=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6ullevk/imximage.cfg"
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_BOUNCE_BUFFER=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6ulz-14x14-evk"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_74X164=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+CONFIG_FSL_ESDHC_IMX=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=40000000
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_REGULATOR=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y
CONFIG_SYS_TEXT_BASE=0x67800000
CONFIG_TARGET_MX7ULP_EVK=y
CONFIG_NR_DRAM_BANKS=1
+CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg"
CONFIG_BOUNCE_BUFFER=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_IMX_RGPIO2P=y
# CONFIG_MXC_GPIO is not set
CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_IMX_LPI2C=y
CONFIG_DM_MMC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
# CONFIG_MXC_GPIO is not set
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
+CONFIG_SYS_I2C_IMX_LPI2C=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_PINCTRL=y
CONFIG_TARGET_NITROGEN6X=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_CMD_HDMIDETECT=y
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_F is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,MX6DL,DDR_MB=2048"
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6dl-nitrogen6x"
CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DM=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_FSL_USDHC=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=25000000
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
CONFIG_VIDEO_IPUV3=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
CONFIG_TARGET_NITROGEN6X=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_CMD_HDMIDETECT=y
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_F is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024"
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6dl-nitrogen6x"
CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DM=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_FSL_USDHC=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=25000000
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
CONFIG_VIDEO_IPUV3=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
CONFIG_TARGET_NITROGEN6X=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_CMD_HDMIDETECT=y
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_F is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048"
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-nitrogen6x"
CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_FSL_USDHC=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=25000000
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
CONFIG_VIDEO_IPUV3=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
CONFIG_TARGET_NITROGEN6X=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_CMD_HDMIDETECT=y
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_F is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024"
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-nitrogen6x"
CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DM=y
CONFIG_DWC_AHSATA=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_FSL_USDHC=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=25000000
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
CONFIG_VIDEO_IPUV3=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
CONFIG_TARGET_NITROGEN6X=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_CMD_HDMIDETECT=y
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_F is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024"
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6dl-nitrogen6x"
CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DM=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_FSL_USDHC=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=25000000
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
CONFIG_VIDEO_IPUV3=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
CONFIG_TARGET_NITROGEN6X=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_CMD_HDMIDETECT=y
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_F is not set
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512"
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6dl-nitrogen6x"
CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DM=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
CONFIG_FSL_USDHC=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_MODE=0
CONFIG_SF_DEFAULT_SPEED=25000000
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_MII=y
CONFIG_SPI=y
+CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
CONFIG_VIDEO_IPUV3=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_SDP=y
CONFIG_CMD_CACHE=y
+CONFIG_CMD_NANDBCB=y
CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
CONFIG_MTDPARTS_DEFAULT="gpmi-nand:4m(uboot),1m(env),-(root)"
CONFIG_CMD_UBI=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_NR_DRAM_BANKS=8
CONFIG_SPL=y
+CONFIG_SPL_TEXT_BASE=0x908000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_PICO_IMX6UL=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
+CONFIG_BOOTDELAY=3
+CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
+CONFIG_DEFAULT_FDT_FILE="imx6ul-pico-dwarf.dtb"
+CONFIG_BOUNCE_BUFFER=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
+CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6ul-pico-pi"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_DFU_MMC=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_SIZE=0x10000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+CONFIG_FSL_USDHC=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MICREL=y
+CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_VIDEO=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_MX7=y
+CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_PICO_IMX7D=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL=y
+CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
+CONFIG_IMX_RDC=y
+CONFIG_IMX_BOOTAUX=y
+CONFIG_SPL_TEXT_BASE=0x00911000
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
+CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
+CONFIG_DEFAULT_FDT_FILE="imx7d-pico-dwarf.dtb"
+CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
+# CONFIG_CMD_BOOTD is not set
+CONFIG_CMD_BOOTMENU=y
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_SPL=y
+CONFIG_CMD_SPL_WRITE_SIZE=0x20000
+CONFIG_CMD_DFU=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_MII is not set
+CONFIG_CMD_BMP=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-pi"
+CONFIG_DFU_MMC=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x82000000
+CONFIG_FASTBOOT_BUF_SIZE=0x10000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_FSL_USDHC=y
+CONFIG_PHYLIB=y
+CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX7=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_MXC_USB_OTG_HACTIVE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
+CONFIG_VIDEO=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_MII is not set
+CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-hobbit"
+CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-pi"
CONFIG_DFU_MMC=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
-CONFIG_VIDEO=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_PICO_IMX6=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_SPL_FIT_PRINT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
+CONFIG_BOOTCOMMAND="run default_boot"
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_DEFAULT_FDT_FILE="ask"
+CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_TEXT_BASE=0x00908000
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_FIT_IMAGE_TINY=y
+CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_SPL=y
+CONFIG_CMD_SPL_WRITE_SIZE=0x20000
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6dl-pico"
+CONFIG_OF_LIST="imx6dl-pico imx6q-pico"
+CONFIG_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_DFU_MMC=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x12000000
+CONFIG_FASTBOOT_BUF_SIZE=0x10000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_FSL_USDHC=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_VIDEO=y
+CONFIG_VIDEO_IPUV3=y
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
+CONFIG_VIDEO=y
CONFIG_SPL_USB_SDP_SUPPORT=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BOOTD is not set
+CONFIG_CMD_BMP=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
CONFIG_USB_ETHER=y
CONFIG_USB_ETH_CDC=y
CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
-CONFIG_VIDEO=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_MII is not set
+CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_OF_CONTROL=y
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
-CONFIG_VIDEO=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_MX7=y
+CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_PICO_IMX7D=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL=y
+CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
+CONFIG_IMX_RDC=y
+CONFIG_IMX_BOOTAUX=y
+CONFIG_SPL_TEXT_BASE=0x00911000
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
+CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
+CONFIG_DEFAULT_FDT_FILE="imx7d-pico-dwarf.dtb"
+CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
+# CONFIG_CMD_BOOTD is not set
+CONFIG_CMD_BOOTMENU=y
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_SPL=y
+CONFIG_CMD_SPL_WRITE_SIZE=0x20000
+CONFIG_CMD_DFU=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_MII is not set
+CONFIG_CMD_BMP=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx7d-pico-pi"
+CONFIG_DFU_MMC=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x82000000
+CONFIG_FASTBOOT_BUF_SIZE=0x10000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_FSL_USDHC=y
+CONFIG_PHYLIB=y
+CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX7=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_MXC_USB_OTG_HACTIVE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
+CONFIG_VIDEO=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_MII is not set
+CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_OF_CONTROL=y
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
-CONFIG_VIDEO=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_LZMA=y
+# CONFIG_EFI_UNICODE_CAPITALIZATION is not set
CONFIG_TARGET_SKSIMX6=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_LZO=y
+CONFIG_SPL_TEXT_BASE=0x00908000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_DM_MMC=y
CONFIG_FSL_USDHC=y
CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_ARM=y
CONFIG_ARCH_MX7=y
CONFIG_SYS_TEXT_BASE=0x87800000
-CONFIG_SECURE_BOOT=y
+CONFIG_IMX_HAB=y
CONFIG_TARGET_WARP7=y
CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
CONFIG_FIT=y
CONFIG_ARM=y
CONFIG_ARCH_MX7=y
CONFIG_SYS_TEXT_BASE=0x87800000
-CONFIG_SECURE_BOOT=y
+CONFIG_IMX_HAB=y
CONFIG_TARGET_WARP7=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
line, use:
$ VER="10.12.01"
- $ wget ftp://ftp.denx.de/pub/tools/elftosb-${VER}.tar.gz
+ $ wget http://repository.timesys.com/buildsources/e/elftosb/elftosb-10.12.01/elftosb-${VER}.tar.gz
Extract the file:
the dek_blob cmd enabled. The image used for DEK blob generation
needs to have the following configurations enabled in Kconfig:
-CONFIG_SECURE_BOOT=y
+CONFIG_IMX_HAB=y
CONFIG_CMD_DEKBLOB=y
Note: The encrypted boot feature is only supported by HABv4 or
The U-Boot provides support to secure boot configuration and also provide
access to the HAB APIs exposed by the ROM vector table, the support is
-enabled by selecting the CONFIG_SECURE_BOOT option.
+enabled by selecting the CONFIG_IMX_HAB option.
When built with this configuration, the U-Boot provides extra functions for
HAB, such as the HAB status logs retrievement through the hab_status command
-------------------------------------
The first step is to generate an U-Boot image supporting the HAB features
-mentioned above, this can be achieved by adding CONFIG_SECURE_BOOT to the
+mentioned above, this can be achieved by adding CONFIG_IMX_HAB to the
build configuration:
- Defconfig:
- CONFIG_SECURE_BOOT=y
+ CONFIG_IMX_HAB=y
- Kconfig:
The U-Boot provides support to secure boot configuration and also provide
access to the HAB APIs exposed by the ROM vector table, the support is
-enabled by selecting the CONFIG_SECURE_BOOT option.
+enabled by selecting the CONFIG_IMX_HAB option.
When built with this configuration the U-Boot correctly pads the final SPL
image by aligning to the next 0xC00 address, so the CSF signature data
-------------------------------------
The first step is to generate an U-Boot image supporting the HAB features
-mentioned above, this can be achieved by adding CONFIG_SECURE_BOOT to the
+mentioned above, this can be achieved by adding CONFIG_IMX_HAB to the
build configuration:
- Defconfig:
- CONFIG_SECURE_BOOT=y
+ CONFIG_IMX_HAB=y
- Kconfig:
--- /dev/null
+Introduction:
+=============
+
+This documentation entry describes the i.MX8 container format and how
+to use.
+
+A Boot image consists of:
+ - Primary Boot Container Set
+ - Optional Secondary Boot Container Set
+
+The imx8image only support the Primary Boot Container Set.
+
+The Primary Boot Container Set contains two containers. The 1st container
+only contain the SECO firmware image, the 2nd container can contain
+multiple images and typically have:
+ - SCF FW image
+ - M4 FW image
+ - AP FW image
+
+For more details, refer i.MX8 Reference Mannual Chapter 5
+"System Boot and section", "5.9 (Boot image) of the processor's manual"
+
+Configuration file:
+==================
+BOOT_FROM [sd|emmc_fastboot|fspi|nand_4k|nand_8k|nand_16k] [sector_size]
+ - indicates the boot media
+SOC_TYPE [IMX8QM|IMX8QX]
+ - indicates the soc
+APPEND [ahab container image]
+ - indicates the ahah image that will be put in the 1st container
+ When creating container image will be loaded by SPL, this entry
+ should not this included
+CONTAINER
+ - indicates to create the 2nd container
+IMAGE [SCU|M40|M41|A35|A53|A72] [image file] [load address]
+ - indicates images will be put in the 2nd container
+
+Example:
+=======
+BOOT_FROM SD 0x400
+SOC_TYPE IMX8QM
+APPEND mx8qm-ahab-container.img
+CONTAINER
+IMAGE SCU mx8qm-mek-scfw-tcm.bin
+IMAGE A35 spl/u-boot-spl.bin 0x00100000
obj-$(CONFIG_CPU) += cpu-uclass.o
obj-$(CONFIG_ARCH_BMIPS) += bmips_cpu.o
+obj-$(CONFIG_ARCH_IMX8) += imx8_cpu.o
obj-$(CONFIG_CPU_MPC83XX) += mpc83xx_cpu.o
obj-$(CONFIG_CPU_RISCV) += riscv_cpu.o
obj-$(CONFIG_SANDBOX) += cpu_sandbox.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <cpu.h>
+#include <dm.h>
+#include <thermal.h>
+#include <asm/arch/sci/sci.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch-imx/cpu.h>
+#include <asm/armv8/cpu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct cpu_imx_platdata {
+ const char *name;
+ const char *rev;
+ const char *type;
+ u32 cpurev;
+ u32 freq_mhz;
+};
+
+const char *get_imx8_type(u32 imxtype)
+{
+ switch (imxtype) {
+ case MXC_CPU_IMX8QXP:
+ case MXC_CPU_IMX8QXP_A0:
+ return "QXP";
+ case MXC_CPU_IMX8QM:
+ return "QM";
+ default:
+ return "??";
+ }
+}
+
+const char *get_imx8_rev(u32 rev)
+{
+ switch (rev) {
+ case CHIP_REV_A:
+ return "A";
+ case CHIP_REV_B:
+ return "B";
+ default:
+ return "?";
+ }
+}
+
+const char *get_core_name(void)
+{
+ if (is_cortex_a35())
+ return "A35";
+ else if (is_cortex_a53())
+ return "A53";
+ else if (is_cortex_a72())
+ return "A72";
+ else
+ return "?";
+}
+
+#if IS_ENABLED(CONFIG_IMX_SCU_THERMAL)
+static int cpu_imx_get_temp(void)
+{
+ struct udevice *thermal_dev;
+ int cpu_tmp, ret;
+
+ ret = uclass_get_device_by_name(UCLASS_THERMAL, "cpu-thermal0",
+ &thermal_dev);
+
+ if (!ret) {
+ ret = thermal_get_temp(thermal_dev, &cpu_tmp);
+ if (ret)
+ return 0xdeadbeef;
+ } else {
+ return 0xdeadbeef;
+ }
+
+ return cpu_tmp;
+}
+#else
+static int cpu_imx_get_temp(void)
+{
+ return 0;
+}
+#endif
+
+int cpu_imx_get_desc(struct udevice *dev, char *buf, int size)
+{
+ struct cpu_imx_platdata *plat = dev_get_platdata(dev);
+ int ret;
+
+ if (size < 100)
+ return -ENOSPC;
+
+ ret = snprintf(buf, size, "NXP i.MX8%s Rev%s %s at %u MHz",
+ plat->type, plat->rev, plat->name, plat->freq_mhz);
+
+ if (IS_ENABLED(CONFIG_IMX_SCU_THERMAL)) {
+ buf = buf + ret;
+ size = size - ret;
+ ret = snprintf(buf, size, " at %dC", cpu_imx_get_temp());
+ }
+
+ snprintf(buf + ret, size - ret, "\n");
+
+ return 0;
+}
+
+static int cpu_imx_get_info(struct udevice *dev, struct cpu_info *info)
+{
+ struct cpu_imx_platdata *plat = dev_get_platdata(dev);
+
+ info->cpu_freq = plat->freq_mhz * 1000;
+ info->features = BIT(CPU_FEAT_L1_CACHE) | BIT(CPU_FEAT_MMU);
+ return 0;
+}
+
+static int cpu_imx_get_count(struct udevice *dev)
+{
+ return 4;
+}
+
+static int cpu_imx_get_vendor(struct udevice *dev, char *buf, int size)
+{
+ snprintf(buf, size, "NXP");
+ return 0;
+}
+
+static const struct cpu_ops cpu_imx8_ops = {
+ .get_desc = cpu_imx_get_desc,
+ .get_info = cpu_imx_get_info,
+ .get_count = cpu_imx_get_count,
+ .get_vendor = cpu_imx_get_vendor,
+};
+
+static const struct udevice_id cpu_imx8_ids[] = {
+ { .compatible = "arm,cortex-a35" },
+ { .compatible = "arm,cortex-a53" },
+ { }
+};
+
+static ulong imx8_get_cpu_rate(void)
+{
+ ulong rate;
+ int ret;
+ int type = is_cortex_a35() ? SC_R_A35 : is_cortex_a53() ?
+ SC_R_A53 : SC_R_A72;
+
+ ret = sc_pm_get_clock_rate(-1, type, SC_PM_CLK_CPU,
+ (sc_pm_clock_rate_t *)&rate);
+ if (ret) {
+ printf("Could not read CPU frequency: %d\n", ret);
+ return 0;
+ }
+
+ return rate;
+}
+
+static int imx8_cpu_probe(struct udevice *dev)
+{
+ struct cpu_imx_platdata *plat = dev_get_platdata(dev);
+ u32 cpurev;
+
+ cpurev = get_cpu_rev();
+ plat->cpurev = cpurev;
+ plat->name = get_core_name();
+ plat->rev = get_imx8_rev(cpurev & 0xFFF);
+ plat->type = get_imx8_type((cpurev & 0xFF000) >> 12);
+ plat->freq_mhz = imx8_get_cpu_rate() / 1000000;
+ return 0;
+}
+
+U_BOOT_DRIVER(cpu_imx8_drv) = {
+ .name = "imx8x_cpu",
+ .id = UCLASS_CPU,
+ .of_match = cpu_imx8_ids,
+ .ops = &cpu_imx8_ops,
+ .probe = imx8_cpu_probe,
+ .platdata_auto_alloc_size = sizeof(struct cpu_imx_platdata),
+ .flags = DM_FLAG_PRE_RELOC,
+};
help
Select the i.MX8M DDR4 driver support on i.MX8M SOC.
+config IMX8M_DDR3L
+ bool "imx8m ddr3l"
+ select IMX8M_DRAM
+ help
+ Select the i.MX8M DDR3L driver support on i.MX8M SOC.
+
config SAVED_DRAM_TIMING_BASE
hex "Define the base address for saved dram timing"
help
#
ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_IMX8M_DRAM) += helper.o ddrphy_utils.o ddrphy_train.o ddrphy_csr.o
-obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_init.o
-obj-$(CONFIG_IMX8M_DDR4) += ddr4_init.o
+obj-$(CONFIG_IMX8M_DRAM) += helper.o ddrphy_utils.o ddrphy_train.o ddrphy_csr.o ddr_init.o
endif
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2018 NXP
- */
-
-#include <common.h>
-#include <errno.h>
-#include <asm/io.h>
-#include <asm/arch/ddr.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/imx8m_ddr.h>
-#include <asm/arch/sys_proto.h>
-
-void ddr4_cfg_umctl2(struct dram_cfg_param *ddrc_cfg, int num)
-{
- int i = 0;
-
- for (i = 0; i < num; i++) {
- reg32_write(ddrc_cfg->reg, ddrc_cfg->val);
- ddrc_cfg++;
- }
-}
-
-void ddr_init(struct dram_timing_info *dram_timing)
-{
- volatile unsigned int tmp_t;
- /*
- * assert [0]ddr1_preset_n, [1]ddr1_core_reset_n,
- * [2]ddr1_phy_reset, [3]ddr1_phy_pwrokin_n,
- * [4]src_system_rst_b!
- */
- reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00003F);
- /* deassert [4]src_system_rst_b! */
- reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
-
- /*
- * change the clock source of dram_apb_clk_root
- * to source 4 --800MHz/4
- */
- clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(4) |
- CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4));
-
- dram_pll_init(DRAM_PLL_OUT_600M);
-
- reg32_write(0x303A00EC, 0x0000ffff); /* PGC_CPU_MAPPING */
- reg32setbit(0x303A00F8, 5); /* PU_PGC_SW_PUP_REQ */
-
- /* release [0]ddr1_preset_n, [3]ddr1_phy_pwrokin_n */
- reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000006);
-
- reg32_write(DDRC_DBG1(0), 0x00000001);
- reg32_write(DDRC_PWRCTL(0), 0x00000001);
-
- while (0 != (0x7 & reg32_read(DDRC_STAT(0))))
- ;
-
- /* config the uMCTL2's registers */
- ddr4_cfg_umctl2(dram_timing->ddrc_cfg, dram_timing->ddrc_cfg_num);
-
- reg32_write(DDRC_RFSHCTL3(0), 0x00000001);
- /* RESET: <ctn> DEASSERTED */
- /* RESET: <a Port 0 DEASSERTED(0) */
- reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000004);
- reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000000);
-
- reg32_write(DDRC_DBG1(0), 0x00000000);
- reg32_write(DDRC_PWRCTL(0), 0x00000aa);
- reg32_write(DDRC_SWCTL(0), 0x00000000);
-
- reg32_write(DDRC_DFIMISC(0), 0x00000000);
-
- /* config the DDR PHY's registers */
- ddr_cfg_phy(dram_timing);
-
- do {
- tmp_t = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) +
- 4 * 0x00020097);
- } while (tmp_t != 0);
-
- reg32_write(DDRC_DFIMISC(0), 0x00000020);
-
- /* wait DFISTAT.dfi_init_complete to 1 */
- while (0 == (0x1 & reg32_read(DDRC_DFISTAT(0))))
- ;
-
- /* clear DFIMISC.dfi_init_complete_en */
- reg32_write(DDRC_DFIMISC(0), 0x00000000);
- /* set DFIMISC.dfi_init_complete_en again */
- reg32_write(DDRC_DFIMISC(0), 0x00000001);
- reg32_write(DDRC_PWRCTL(0), 0x0000088);
-
- /*
- * set SWCTL.sw_done to enable quasi-dynamic register
- * programming outside reset.
- */
- reg32_write(DDRC_SWCTL(0), 0x00000001);
- /* wait SWSTAT.sw_done_ack to 1 */
- while (0 == (0x1 & reg32_read(DDRC_SWSTAT(0))))
- ;
-
- /* wait STAT to normal state */
- while (0x1 != (0x7 & reg32_read(DDRC_STAT(0))))
- ;
-
- reg32_write(DDRC_PWRCTL(0), 0x0000088);
- reg32_write(DDRC_PCTRL_0(0), 0x00000001);
- /* dis_auto-refresh is set to 0 */
- reg32_write(DDRC_RFSHCTL3(0), 0x00000000);
-
- /* save the dram timing config into memory */
- dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE);
-}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/ddr.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+
+void ddr_cfg_umctl2(struct dram_cfg_param *ddrc_cfg, int num)
+{
+ int i = 0;
+
+ for (i = 0; i < num; i++) {
+ reg32_write(ddrc_cfg->reg, ddrc_cfg->val);
+ ddrc_cfg++;
+ }
+}
+
+void ddr_init(struct dram_timing_info *dram_timing)
+{
+ unsigned int tmp, initial_drate, target_freq;
+
+ printf("DDRINFO: start DRAM init\n");
+
+ /* Step1: Follow the power up procedure */
+ if (is_imx8mq()) {
+ reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F00000F);
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
+ reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F000000);
+ } else {
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00001F);
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
+ }
+
+ debug("DDRINFO: cfg clk\n");
+ /* change the clock source of dram_apb_clk_root: source 4 800MHz /4 = 200MHz */
+ clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(4) |
+ CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4));
+
+ /* disable iso */
+ reg32_write(0x303A00EC, 0x0000ffff); /* PGC_CPU_MAPPING */
+ reg32setbit(0x303A00F8, 5); /* PU_PGC_SW_PUP_REQ */
+
+ initial_drate = dram_timing->fsp_msg[0].drate;
+ /* default to the frequency point 0 clock */
+ ddrphy_init_set_dfi_clk(initial_drate);
+
+ /* D-aasert the presetn */
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000006);
+
+ /* Step2: Program the dwc_ddr_umctl2 registers */
+ debug("DDRINFO: ddrc config start\n");
+ ddr_cfg_umctl2(dram_timing->ddrc_cfg, dram_timing->ddrc_cfg_num);
+ debug("DDRINFO: ddrc config done\n");
+
+ /* Step3: De-assert reset signal(core_ddrc_rstn & aresetn_n) */
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000004);
+ reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000000);
+
+ /*
+ * Step4: Disable auto-refreshes, self-refresh, powerdown, and
+ * assertion of dfi_dram_clk_disable by setting RFSHCTL3.dis_auto_refresh = 1,
+ * PWRCTL.powerdown_en = 0, and PWRCTL.selfref_en = 0, PWRCTL.en_dfi_dram_clk_disable = 0
+ */
+ reg32_write(DDRC_DBG1(0), 0x00000000);
+ reg32_write(DDRC_RFSHCTL3(0), 0x0000001);
+ reg32_write(DDRC_PWRCTL(0), 0xa0);
+
+ /* if ddr type is LPDDR4, do it */
+ tmp = reg32_read(DDRC_MSTR(0));
+ if (tmp & (0x1 << 5))
+ reg32_write(DDRC_DDR_SS_GPR0, 0x01); /* LPDDR4 mode */
+
+ /* determine the initial boot frequency */
+ target_freq = reg32_read(DDRC_MSTR2(0)) & 0x3;
+ target_freq = (tmp & (0x1 << 29)) ? target_freq : 0x0;
+
+ /* Step5: Set SWCT.sw_done to 0 */
+ reg32_write(DDRC_SWCTL(0), 0x00000000);
+
+ /* Set the default boot frequency point */
+ clrsetbits_le32(DDRC_DFIMISC(0), (0x1f << 8), target_freq << 8);
+ /* Step6: Set DFIMISC.dfi_init_complete_en to 0 */
+ clrbits_le32(DDRC_DFIMISC(0), 0x1);
+
+ /* Step7: Set SWCTL.sw_done to 1; need to polling SWSTAT.sw_done_ack */
+ reg32_write(DDRC_SWCTL(0), 0x00000001);
+ do {
+ tmp = reg32_read(DDRC_SWSTAT(0));
+ } while ((tmp & 0x1) == 0x0);
+
+ /*
+ * Step8 ~ Step13: Start PHY initialization and training by
+ * accessing relevant PUB registers
+ */
+ debug("DDRINFO:ddrphy config start\n");
+ ddr_cfg_phy(dram_timing);
+ debug("DDRINFO: ddrphy config done\n");
+
+ /*
+ * step14 CalBusy.0 =1, indicates the calibrator is actively
+ * calibrating. Wait Calibrating done.
+ */
+ do {
+ tmp = reg32_read(DDRPHY_CalBusy(0));
+ } while ((tmp & 0x1));
+
+ printf("DDRINFO:ddrphy calibration done\n");
+
+ /* Step15: Set SWCTL.sw_done to 0 */
+ reg32_write(DDRC_SWCTL(0), 0x00000000);
+
+ /* Step16: Set DFIMISC.dfi_init_start to 1 */
+ setbits_le32(DDRC_DFIMISC(0), (0x1 << 5));
+
+ /* Step17: Set SWCTL.sw_done to 1; need to polling SWSTAT.sw_done_ack */
+ reg32_write(DDRC_SWCTL(0), 0x00000001);
+ do {
+ tmp = reg32_read(DDRC_SWSTAT(0));
+ } while ((tmp & 0x1) == 0x0);
+
+ /* Step18: Polling DFISTAT.dfi_init_complete = 1 */
+ do {
+ tmp = reg32_read(DDRC_DFISTAT(0));
+ } while ((tmp & 0x1) == 0x0);
+
+ /* Step19: Set SWCTL.sw_done to 0 */
+ reg32_write(DDRC_SWCTL(0), 0x00000000);
+
+ /* Step20: Set DFIMISC.dfi_init_start to 0 */
+ clrbits_le32(DDRC_DFIMISC(0), (0x1 << 5));
+
+ /* Step21: optional */
+
+ /* Step22: Set DFIMISC.dfi_init_complete_en to 1 */
+ setbits_le32(DDRC_DFIMISC(0), 0x1);
+
+ /* Step23: Set PWRCTL.selfref_sw to 0 */
+ clrbits_le32(DDRC_PWRCTL(0), (0x1 << 5));
+
+ /* Step24: Set SWCTL.sw_done to 1; need polling SWSTAT.sw_done_ack */
+ reg32_write(DDRC_SWCTL(0), 0x00000001);
+ do {
+ tmp = reg32_read(DDRC_SWSTAT(0));
+ } while ((tmp & 0x1) == 0x0);
+
+ /* Step25: Wait for dwc_ddr_umctl2 to move to normal operating mode by monitoring
+ * STAT.operating_mode signal */
+ do {
+ tmp = reg32_read(DDRC_STAT(0));
+ } while ((tmp & 0x3) != 0x1);
+
+ /* Step26: Set back register in Step4 to the original values if desired */
+ reg32_write(DDRC_RFSHCTL3(0), 0x0000000);
+ /* enable selfref_en by default */
+ setbits_le32(DDRC_PWRCTL(0), 0x1 << 3);
+
+ /* enable port 0 */
+ reg32_write(DDRC_PCTRL_0(0), 0x00000001);
+ printf("DDRINFO: ddrmix config done\n");
+
+ /* save the dram timing config into memory */
+ dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE);
+}
dram_pll_init(MHZ(400));
dram_disable_bypass();
break;
+ case 1066:
+ dram_pll_init(MHZ(266));
+ dram_disable_bypass();
+ break;
case 667:
dram_pll_init(MHZ(167));
dram_disable_bypass();
unsigned long pr_to32, pr_from32;
unsigned long fw_offset = type ? IMEM_2D_OFFSET : 0;
unsigned long imem_start = (unsigned long)&_end + fw_offset;
- unsigned long dmem_start = imem_start + IMEM_LEN;
+ unsigned long dmem_start;
+
+#ifdef CONFIG_SPL_OF_CONTROL
+ if (gd->fdt_blob && !fdt_check_header(gd->fdt_blob)) {
+ imem_start = roundup((unsigned long)&_end +
+ fdt_totalsize(gd->fdt_blob), 4) +
+ fw_offset;
+ }
+#endif
+
+ dmem_start = imem_start + IMEM_LEN;
pr_from32 = imem_start;
pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * IMEM_OFFSET_ADDR;
i += 4;
}
- debug("check ddr4_pmu_train_imem code\n");
+ debug("check ddr_pmu_train_imem code\n");
pr_from32 = imem_start;
pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * IMEM_OFFSET_ADDR;
for (i = 0x0; i < IMEM_LEN; ) {
i += 4;
}
if (error)
- printf("check ddr4_pmu_train_imem code fail=%d\n", error);
+ printf("check ddr_pmu_train_imem code fail=%d\n", error);
else
- debug("check ddr4_pmu_train_imem code pass\n");
+ debug("check ddr_pmu_train_imem code pass\n");
debug("check ddr4_pmu_train_dmem code\n");
pr_from32 = dmem_start;
}
if (error)
- printf("check ddr4_pmu_train_dmem code fail=%d", error);
+ printf("check ddr_pmu_train_dmem code fail=%d", error);
else
- debug("check ddr4_pmu_train_dmem code pass\n");
+ debug("check ddr_pmu_train_dmem code pass\n");
}
void ddrphy_trained_csr_save(struct dram_cfg_param *ddrphy_csr,
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
-* Copyright 2018 NXP
-*
-*/
-
-#include <common.h>
-#include <errno.h>
-#include <asm/io.h>
-#include <asm/arch/ddr.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/ddr.h>
-#include <asm/arch/lpddr4_define.h>
-#include <asm/arch/sys_proto.h>
-
-void lpddr4_cfg_umctl2(struct dram_cfg_param *ddrc_cfg, int num)
-{
- int i = 0;
-
- for (i = 0; i < num; i++) {
- reg32_write(ddrc_cfg->reg, ddrc_cfg->val);
- ddrc_cfg++;
- }
-}
-
-void ddr_init(struct dram_timing_info *dram_timing)
-{
- unsigned int tmp;
-
- debug("DDRINFO: start lpddr4 ddr init\n");
- /* step 1: reset */
- if (is_imx8mq()) {
- reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F00000F);
- reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
- reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F000000);
- } else {
- reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00001F);
- reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F);
- }
-
- mdelay(100);
-
- debug("DDRINFO: reset done\n");
- /*
- * change the clock source of dram_apb_clk_root:
- * source 4 800MHz /4 = 200MHz
- */
- clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
- CLK_ROOT_SOURCE_SEL(4) |
- CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4));
-
- /* disable iso */
- reg32_write(0x303A00EC, 0x0000ffff); /* PGC_CPU_MAPPING */
- reg32setbit(0x303A00F8, 5); /* PU_PGC_SW_PUP_REQ */
-
- debug("DDRINFO: cfg clk\n");
- dram_pll_init(MHZ(750));
-
- /*
- * release [0]ddr1_preset_n, [1]ddr1_core_reset_n,
- * [2]ddr1_phy_reset, [3]ddr1_phy_pwrokin_n
- */
- reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000006);
-
- /*step2 Configure uMCTL2's registers */
- debug("DDRINFO: ddrc config start\n");
- lpddr4_cfg_umctl2(dram_timing->ddrc_cfg, dram_timing->ddrc_cfg_num);
- debug("DDRINFO: ddrc config done\n");
-
- /*
- * step3 de-assert all reset
- * RESET: <core_ddrc_rstn> DEASSERTED
- * RESET: <aresetn> for Port 0 DEASSERT(0)ED
- */
- reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000004);
- reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000000);
-
- reg32_write(DDRC_DBG1(0), 0x00000000);
- /* step4 */
- /* [0]dis_auto_refresh=1 */
- reg32_write(DDRC_RFSHCTL3(0), 0x00000011);
-
- /* [8]--1: lpddr4_sr allowed; [5]--1: software entry to SR */
- reg32_write(DDRC_PWRCTL(0), 0x000000a8);
-
- do {
- tmp = reg32_read(DDRC_STAT(0));
- } while ((tmp & 0x33f) != 0x223);
-
- reg32_write(DDRC_DDR_SS_GPR0, 0x01); /* LPDDR4 mode */
-
- /* step5 */
- reg32_write(DDRC_SWCTL(0), 0x00000000);
-
- /* step6 */
- tmp = reg32_read(DDRC_MSTR2(0));
- if (tmp == 0x2)
- reg32_write(DDRC_DFIMISC(0), 0x00000210);
- else if (tmp == 0x1)
- reg32_write(DDRC_DFIMISC(0), 0x00000110);
- else
- reg32_write(DDRC_DFIMISC(0), 0x00000010);
-
- /* step7 [0]--1: disable quasi-dynamic programming */
- reg32_write(DDRC_SWCTL(0), 0x00000001);
-
- /* step8 Configure LPDDR4 PHY's registers */
- debug("DDRINFO:ddrphy config start\n");
- ddr_cfg_phy(dram_timing);
- debug("DDRINFO: ddrphy config done\n");
-
- /*
- * step14 CalBusy.0 =1, indicates the calibrator is actively
- * calibrating. Wait Calibrating done.
- */
- do {
- tmp = reg32_read(DDRPHY_CalBusy(0));
- } while ((tmp & 0x1));
-
- debug("DDRINFO:ddrphy calibration done\n");
-
- /* step15 [0]--0: to enable quasi-dynamic programming */
- reg32_write(DDRC_SWCTL(0), 0x00000000);
-
- /* step16 */
- tmp = reg32_read(DDRC_MSTR2(0));
- if (tmp == 0x2)
- reg32_write(DDRC_DFIMISC(0), 0x00000230);
- else if (tmp == 0x1)
- reg32_write(DDRC_DFIMISC(0), 0x00000130);
- else
- reg32_write(DDRC_DFIMISC(0), 0x00000030);
-
- /* step17 [0]--1: disable quasi-dynamic programming */
- reg32_write(DDRC_SWCTL(0), 0x00000001);
- /* step18 wait DFISTAT.dfi_init_complete to 1 */
- do {
- tmp = reg32_read(DDRC_DFISTAT(0));
- } while ((tmp & 0x1) == 0x0);
-
- /* step19 */
- reg32_write(DDRC_SWCTL(0), 0x00000000);
-
- /* step20~22 */
- tmp = reg32_read(DDRC_MSTR2(0));
- if (tmp == 0x2) {
- reg32_write(DDRC_DFIMISC(0), 0x00000210);
- /* set DFIMISC.dfi_init_complete_en again */
- reg32_write(DDRC_DFIMISC(0), 0x00000211);
- } else if (tmp == 0x1) {
- reg32_write(DDRC_DFIMISC(0), 0x00000110);
- /* set DFIMISC.dfi_init_complete_en again */
- reg32_write(DDRC_DFIMISC(0), 0x00000111);
- } else {
- /* clear DFIMISC.dfi_init_complete_en */
- reg32_write(DDRC_DFIMISC(0), 0x00000010);
- /* set DFIMISC.dfi_init_complete_en again */
- reg32_write(DDRC_DFIMISC(0), 0x00000011);
- }
-
- /* step23 [5]selfref_sw=0; */
- reg32_write(DDRC_PWRCTL(0), 0x00000008);
- /* step24 sw_done=1 */
- reg32_write(DDRC_SWCTL(0), 0x00000001);
-
- /* step25 wait SWSTAT.sw_done_ack to 1 */
- do {
- tmp = reg32_read(DDRC_SWSTAT(0));
- } while ((tmp & 0x1) == 0x0);
-
-#ifdef DFI_BUG_WR
- reg32_write(DDRC_DFIPHYMSTR(0), 0x00000001);
-#endif
- /* wait STAT.operating_mode([1:0] for ddr3) to normal state */
- do {
- tmp = reg32_read(DDRC_STAT(0));
- } while ((tmp & 0x3) != 0x1);
-
- /* step26 */
- reg32_write(DDRC_RFSHCTL3(0), 0x00000010);
-
- /* enable port 0 */
- reg32_write(DDRC_PCTRL_0(0), 0x00000001);
- debug("DDRINFO: ddrmix config done\n");
-
- /* save the dram timing config into memory */
- dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE);
-}
#else /* CONFIG_DM_GPIO */
#include <dm.h>
#include <asm/gpio.h>
+#include <dt-structs.h>
#include <asm/arch/gpio.h>
#define MXS_MAX_GPIO_PER_BANK 32
+#ifdef CONFIG_MX28
+#define dtd_fsl_imx_gpio dtd_fsl_imx28_gpio
+#else /* CONFIG_MX23 */
+#define dtd_fsl_imx_gpio dtd_fsl_imx23_gpio
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
/*
* According to i.MX28 Reference Manual:
* Bank 4: 0-20 -> 21 PINS
*/
+struct mxs_gpio_platdata {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+ struct dtd_fsl_imx_gpio dtplat;
+#endif
+ unsigned int bank;
+ int gpio_ranges;
+};
+
struct mxs_gpio_priv {
unsigned int bank;
};
static int mxs_gpio_probe(struct udevice *dev)
{
+ struct mxs_gpio_platdata *plat = dev_get_platdata(dev);
struct mxs_gpio_priv *priv = dev_get_priv(dev);
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
- struct fdtdec_phandle_args args;
- int node = dev_of_offset(dev);
char name[16], *str;
- fdt_addr_t addr;
- int ret;
-
- addr = devfdt_get_addr(dev);
- if (addr == FDT_ADDR_T_NONE) {
- printf("%s: No 'reg' property defined!\n", __func__);
- return -EINVAL;
- }
-
- priv->bank = (unsigned int)addr;
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+ struct dtd_fsl_imx_gpio *dtplat = &plat->dtplat;
+ priv->bank = (unsigned int)dtplat->reg[0];
+ uc_priv->gpio_count = dtplat->gpio_ranges[3];
+#else
+ priv->bank = (unsigned int)plat->bank;
+ uc_priv->gpio_count = plat->gpio_ranges;
+#endif
snprintf(name, sizeof(name), "GPIO%d_", priv->bank);
str = strdup(name);
if (!str)
uc_priv->bank_name = str;
+ debug("%s: %s: %d pins base: 0x%x\n", __func__, uc_priv->bank_name,
+ uc_priv->gpio_count, priv->bank);
+
+ return 0;
+}
+
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
+static int mxs_ofdata_to_platdata(struct udevice *dev)
+{
+ struct mxs_gpio_platdata *plat = dev->platdata;
+ struct fdtdec_phandle_args args;
+ int node = dev_of_offset(dev);
+ int ret;
+
+ plat->bank = devfdt_get_addr(dev);
+ if (plat->bank == FDT_ADDR_T_NONE) {
+ printf("%s: No 'reg' property defined!\n", __func__);
+ return -EINVAL;
+ }
+
ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, node, "gpio-ranges",
NULL, 3, 0, &args);
if (ret)
printf("%s: 'gpio-ranges' not defined - using default!\n",
__func__);
- uc_priv->gpio_count = ret == 0 ? args.args[2] : MXS_MAX_GPIO_PER_BANK;
-
- debug("%s: %s: %d pins\n", __func__, uc_priv->bank_name,
- uc_priv->gpio_count);
+ plat->gpio_ranges = ret == 0 ? args.args[2] : MXS_MAX_GPIO_PER_BANK;
return 0;
}
{ .compatible = "fsl,imx28-gpio" },
{ }
};
+#endif
U_BOOT_DRIVER(gpio_mxs) = {
- .name = "gpio_mxs",
+#ifdef CONFIG_MX28
+ .name = "fsl_imx28_gpio",
+#else /* CONFIG_MX23 */
+ .name = "fsl_imx23_gpio",
+#endif
.id = UCLASS_GPIO,
.ops = &gpio_mxs_ops,
.probe = mxs_gpio_probe,
.priv_auto_alloc_size = sizeof(struct mxs_gpio_priv),
+ .platdata_auto_alloc_size = sizeof(struct mxs_gpio_platdata),
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
.of_match = mxs_gpio_ids,
+ .ofdata_to_platdata = mxs_ofdata_to_platdata,
+#endif
};
#endif /* CONFIG_DM_GPIO */
config MXC_OCOTP
bool "Enable MXC OCOTP Driver"
- depends on ARCH_IMX8M || ARCH_MX6 || ARCH_MX7 || ARCH_VF610
+ depends on ARCH_IMX8M || ARCH_MX6 || ARCH_MX7 || ARCH_MX7ULP || ARCH_VF610
default y
help
If you say Y here, you will get support for the One Time
DECLARE_GLOBAL_DATA_PTR;
+#define B2U8(X) (((X) != SC_FALSE) ? (u8)(0x01U) : (u8)(0x00U))
+
/* CLK and PM */
int sc_pm_set_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk,
sc_pm_clock_rate_t *rate)
return ret;
}
+int sc_pm_set_clock_parent(sc_ipc_t ipc, sc_rsrc_t resource,
+ sc_pm_clk_t clk, sc_pm_clk_parent_t parent)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ int size = sizeof(struct sc_rpc_msg_s);
+ struct sc_rpc_msg_s msg;
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_PM;
+ RPC_FUNC(&msg) = (u8)PM_FUNC_SET_CLOCK_PARENT;
+ RPC_U16(&msg, 0U) = (u16)resource;
+ RPC_U8(&msg, 2U) = (u8)clk;
+ RPC_U8(&msg, 3U) = (u8)parent;
+ RPC_SIZE(&msg) = 2U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret)
+ printf("%s: resource:%d clk:%d: parent clk: %d, res:%d\n",
+ __func__, resource, clk, parent, RPC_R8(&msg));
+
+ return ret;
+}
+
int sc_pm_set_resource_power_mode(sc_ipc_t ipc, sc_rsrc_t resource,
sc_pm_power_mode_t mode)
{
return ret;
}
+sc_bool_t sc_pm_is_partition_started(sc_ipc_t ipc, sc_rm_pt_t pt)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ int size = sizeof(struct sc_rpc_msg_s);
+ struct sc_rpc_msg_s msg;
+ int ret;
+ u8 result;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)(SC_RPC_SVC_PM);
+ RPC_FUNC(&msg) = (u8)(PM_FUNC_IS_PARTITION_STARTED);
+ RPC_U8(&msg, 0U) = (u8)(pt);
+ RPC_SIZE(&msg) = 2U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+
+ result = RPC_R8(&msg);
+ if (result != 0 && result != 1) {
+ printf("%s: partition:%d res:%d\n",
+ __func__, pt, RPC_R8(&msg));
+ if (ret)
+ printf("%s: partition:%d res:%d\n", __func__, pt,
+ RPC_R8(&msg));
+ }
+ return !!result;
+}
+
/* PAD */
int sc_pad_set(sc_ipc_t ipc, sc_pad_t pad, u32 val)
{
}
/* MISC */
+int sc_misc_set_control(sc_ipc_t ipc, sc_rsrc_t resource,
+ sc_ctrl_t ctrl, u32 val)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ int size = sizeof(struct sc_rpc_msg_s);
+ struct sc_rpc_msg_s msg;
+ int ret;
+
+ if (!dev)
+ hang();
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_MISC;
+ RPC_FUNC(&msg) = (u8)MISC_FUNC_SET_CONTROL;
+ RPC_U32(&msg, 0U) = (u32)ctrl;
+ RPC_U32(&msg, 4U) = (u32)val;
+ RPC_U16(&msg, 8U) = (u16)resource;
+ RPC_SIZE(&msg) = 4U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret)
+ printf("%s: ctrl:%d resource:%d: res:%d\n",
+ __func__, ctrl, resource, RPC_R8(&msg));
+
+ return ret;
+}
+
int sc_misc_get_control(sc_ipc_t ipc, sc_rsrc_t resource, sc_ctrl_t ctrl,
u32 *val)
{
return ret;
}
+int sc_rm_set_master_sid(sc_ipc_t ipc, sc_rsrc_t resource, sc_rm_sid_t sid)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_RM;
+ RPC_FUNC(&msg) = (u8)RM_FUNC_SET_MASTER_SID;
+ RPC_U16(&msg, 0U) = (u16)resource;
+ RPC_U16(&msg, 2U) = (u16)sid;
+ RPC_SIZE(&msg) = 2U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret)
+ printf("%s: resource:%d sid:%d: res:%d\n",
+ __func__, resource, sid, RPC_R8(&msg));
+
+ return ret;
+}
+
void sc_misc_get_boot_dev(sc_ipc_t ipc, sc_rsrc_t *boot_dev)
{
struct udevice *dev = gd->arch.scu_dev;
return (sc_bool_t)result;
}
+int sc_rm_find_memreg(sc_ipc_t ipc, sc_rm_mr_t *mr, sc_faddr_t addr_start,
+ sc_faddr_t addr_end)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ int size = sizeof(struct sc_rpc_msg_s);
+ struct sc_rpc_msg_s msg;
+ int ret;
+
+ if (!dev)
+ hang();
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)(SC_RPC_SVC_RM);
+ RPC_FUNC(&msg) = (u8)(RM_FUNC_FIND_MEMREG);
+ RPC_U32(&msg, 0U) = (u32)(addr_start >> 32ULL);
+ RPC_U32(&msg, 4U) = (u32)(addr_start);
+ RPC_U32(&msg, 8U) = (u32)(addr_end >> 32ULL);
+ RPC_U32(&msg, 12U) = (u32)(addr_end);
+ RPC_SIZE(&msg) = 5U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret)
+ printf("%s: start:0x%llx, end:0x%llx res:%d\n", __func__, addr_start, addr_end, RPC_R8(&msg));
+
+ if (mr)
+ *mr = RPC_U8(&msg, 0U);
+
+ return ret;
+}
+
+int sc_rm_set_memreg_permissions(sc_ipc_t ipc, sc_rm_mr_t mr,
+ sc_rm_pt_t pt, sc_rm_perm_t perm)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ int size = sizeof(struct sc_rpc_msg_s);
+ struct sc_rpc_msg_s msg;
+ int ret;
+
+ if (!dev)
+ hang();
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)(SC_RPC_SVC_RM);
+ RPC_FUNC(&msg) = (u8)(RM_FUNC_SET_MEMREG_PERMISSIONS);
+ RPC_U8(&msg, 0U) = (u8)(mr);
+ RPC_U8(&msg, 1U) = (u8)(pt);
+ RPC_U8(&msg, 2U) = (u8)(perm);
+ RPC_SIZE(&msg) = 2U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret) {
+ printf("%s: mr:%u, pt:%u, perm:%u, res:%d\n", __func__,
+ mr, pt, perm, RPC_R8(&msg));
+ }
+
+ return ret;
+}
+
int sc_rm_get_memreg_info(sc_ipc_t ipc, sc_rm_mr_t mr, sc_faddr_t *addr_start,
sc_faddr_t *addr_end)
{
return !!result;
}
+
+int sc_rm_partition_alloc(sc_ipc_t ipc, sc_rm_pt_t *pt, sc_bool_t secure,
+ sc_bool_t isolated, sc_bool_t restricted,
+ sc_bool_t grant, sc_bool_t coherent)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_RM;
+ RPC_FUNC(&msg) = (u8)RM_FUNC_PARTITION_ALLOC;
+ RPC_U8(&msg, 0U) = B2U8(secure);
+ RPC_U8(&msg, 1U) = B2U8(isolated);
+ RPC_U8(&msg, 2U) = B2U8(restricted);
+ RPC_U8(&msg, 3U) = B2U8(grant);
+ RPC_U8(&msg, 4U) = B2U8(coherent);
+ RPC_SIZE(&msg) = 3U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret) {
+ printf("%s: secure:%u isolated:%u restricted:%u grant:%u coherent:%u res:%d\n",
+ __func__, secure, isolated, restricted, grant, coherent,
+ RPC_R8(&msg));
+ }
+
+ if (pt)
+ *pt = RPC_U8(&msg, 0U);
+
+ return ret;
+}
+
+int sc_rm_partition_free(sc_ipc_t ipc, sc_rm_pt_t pt)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_RM;
+ RPC_FUNC(&msg) = (u8)RM_FUNC_PARTITION_FREE;
+ RPC_U8(&msg, 0U) = (u8)pt;
+ RPC_SIZE(&msg) = 2U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret) {
+ printf("%s: pt:%u res:%d\n",
+ __func__, pt, RPC_R8(&msg));
+ }
+
+ return ret;
+}
+
+int sc_rm_get_partition(sc_ipc_t ipc, sc_rm_pt_t *pt)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_RM;
+ RPC_FUNC(&msg) = (u8)RM_FUNC_GET_PARTITION;
+ RPC_SIZE(&msg) = 1U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret)
+ printf("%s: res:%d\n", __func__, RPC_R8(&msg));
+
+ if (pt)
+ *pt = RPC_U8(&msg, 0U);
+
+ return ret;
+}
+
+int sc_rm_set_parent(sc_ipc_t ipc, sc_rm_pt_t pt, sc_rm_pt_t pt_parent)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_RM;
+ RPC_FUNC(&msg) = (u8)RM_FUNC_SET_PARENT;
+ RPC_U8(&msg, 0U) = (u8)pt;
+ RPC_U8(&msg, 1U) = (u8)pt_parent;
+ RPC_SIZE(&msg) = 2U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret) {
+ printf("%s: pt:%u, pt_parent:%u, res:%d\n",
+ __func__, pt, pt_parent, RPC_R8(&msg));
+ }
+
+ return ret;
+}
+
+int sc_rm_assign_resource(sc_ipc_t ipc, sc_rm_pt_t pt, sc_rsrc_t resource)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_RM;
+ RPC_FUNC(&msg) = (u8)RM_FUNC_ASSIGN_RESOURCE;
+ RPC_U16(&msg, 0U) = (u16)resource;
+ RPC_U8(&msg, 2U) = (u8)pt;
+ RPC_SIZE(&msg) = 2U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret) {
+ printf("%s: pt:%u, resource:%u, res:%d\n",
+ __func__, pt, resource, RPC_R8(&msg));
+ }
+
+ return ret;
+}
+
+int sc_rm_assign_pad(sc_ipc_t ipc, sc_rm_pt_t pt, sc_pad_t pad)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_RM;
+ RPC_FUNC(&msg) = (u8)RM_FUNC_ASSIGN_PAD;
+ RPC_U16(&msg, 0U) = (u16)pad;
+ RPC_U8(&msg, 2U) = (u8)pt;
+ RPC_SIZE(&msg) = 2U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret) {
+ printf("%s: pt:%u, pad:%u, res:%d\n",
+ __func__, pt, pad, RPC_R8(&msg));
+ }
+
+ return ret;
+}
+
+sc_bool_t sc_rm_is_pad_owned(sc_ipc_t ipc, sc_pad_t pad)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+ u8 result;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_RM;
+ RPC_FUNC(&msg) = (u8)RM_FUNC_IS_PAD_OWNED;
+ RPC_U8(&msg, 0U) = (u8)pad;
+ RPC_SIZE(&msg) = 2U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ result = RPC_R8(&msg);
+ if (result != 0 && result != 1) {
+ printf("%s: pad:%d res:%d\n", __func__, pad, RPC_R8(&msg));
+ if (ret) {
+ printf("%s: pad:%d res:%d\n", __func__,
+ pad, RPC_R8(&msg));
+ }
+ }
+
+ return !!result;
+}
+
+int sc_rm_get_resource_owner(sc_ipc_t ipc, sc_rsrc_t resource,
+ sc_rm_pt_t *pt)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_RM;
+ RPC_FUNC(&msg) = (u8)RM_FUNC_GET_RESOURCE_OWNER;
+ RPC_U16(&msg, 0U) = (u16)resource;
+ RPC_SIZE(&msg) = 2U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (pt)
+ *pt = RPC_U8(&msg, 0U);
+
+ return ret;
+}
+
+int sc_pm_cpu_start(sc_ipc_t ipc, sc_rsrc_t resource, sc_bool_t enable,
+ sc_faddr_t address)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_PM;
+ RPC_FUNC(&msg) = (u8)PM_FUNC_CPU_START;
+ RPC_U32(&msg, 0U) = (u32)(address >> 32ULL);
+ RPC_U32(&msg, 4U) = (u32)address;
+ RPC_U16(&msg, 8U) = (u16)resource;
+ RPC_U8(&msg, 10U) = B2U8(enable);
+ RPC_SIZE(&msg) = 4U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret) {
+ printf("%s: resource:%d address:0x%llx: res:%d\n",
+ __func__, resource, address, RPC_R8(&msg));
+ }
+
+ return ret;
+}
+
+int sc_pm_get_resource_power_mode(sc_ipc_t ipc, sc_rsrc_t resource,
+ sc_pm_power_mode_t *mode)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_PM;
+ RPC_FUNC(&msg) = (u8)PM_FUNC_GET_RESOURCE_POWER_MODE;
+ RPC_U16(&msg, 0U) = (u16)resource;
+ RPC_SIZE(&msg) = 2U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret) {
+ printf("%s: resource:%d: res:%d\n",
+ __func__, resource, RPC_R8(&msg));
+ }
+
+ if (mode)
+ *mode = RPC_U8(&msg, 0U);
+
+ return ret;
+}
+
+int sc_seco_authenticate(sc_ipc_t ipc, sc_seco_auth_cmd_t cmd,
+ sc_faddr_t addr)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_SECO;
+ RPC_FUNC(&msg) = (u8)SECO_FUNC_AUTHENTICATE;
+ RPC_U32(&msg, 0U) = (u32)(addr >> 32ULL);
+ RPC_U32(&msg, 4U) = (u32)addr;
+ RPC_U8(&msg, 8U) = (u8)cmd;
+ RPC_SIZE(&msg) = 4U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret)
+ printf("%s: res:%d\n", __func__, RPC_R8(&msg));
+
+ return ret;
+}
+
+int sc_seco_forward_lifecycle(sc_ipc_t ipc, u32 change)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_SECO;
+ RPC_FUNC(&msg) = (u8)SECO_FUNC_FORWARD_LIFECYCLE;
+ RPC_U32(&msg, 0U) = (u32)change;
+ RPC_SIZE(&msg) = 2U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret) {
+ printf("%s: change:%u, res:%d\n", __func__,
+ change, RPC_R8(&msg));
+ }
+
+ return ret;
+}
+
+int sc_seco_chip_info(sc_ipc_t ipc, u16 *lc, u16 *monotonic, u32 *uid_l,
+ u32 *uid_h)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_SECO;
+ RPC_FUNC(&msg) = (u8)SECO_FUNC_CHIP_INFO;
+ RPC_SIZE(&msg) = 1U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret)
+ printf("%s: res:%d\n", __func__, RPC_R8(&msg));
+
+ if (uid_l)
+ *uid_l = RPC_U32(&msg, 0U);
+
+ if (uid_h)
+ *uid_h = RPC_U32(&msg, 4U);
+
+ if (lc)
+ *lc = RPC_U16(&msg, 8U);
+
+ if (monotonic)
+ *monotonic = RPC_U16(&msg, 10U);
+
+ return ret;
+}
+
+void sc_seco_build_info(sc_ipc_t ipc, u32 *version, u32 *commit)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)(SC_RPC_SVC_SECO);
+ RPC_FUNC(&msg) = (u8)(SECO_FUNC_BUILD_INFO);
+ RPC_SIZE(&msg) = 1U;
+
+ misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+
+ if (version)
+ *version = RPC_U32(&msg, 0U);
+
+ if (commit)
+ *commit = RPC_U32(&msg, 4U);
+}
+
+int sc_seco_get_event(sc_ipc_t ipc, u8 idx, u32 *event)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_SECO;
+ RPC_FUNC(&msg) = (u8)SECO_FUNC_GET_EVENT;
+ RPC_U8(&msg, 0U) = (u8)idx;
+ RPC_SIZE(&msg) = 2U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret)
+ printf("%s: idx: %u, res:%d\n", __func__, idx, RPC_R8(&msg));
+
+ if (event)
+ *event = RPC_U32(&msg, 0U);
+
+ return ret;
+}
+
+int sc_seco_gen_key_blob(sc_ipc_t ipc, u32 id, sc_faddr_t load_addr,
+ sc_faddr_t export_addr, u16 max_size)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ struct sc_rpc_msg_s msg;
+ int size = sizeof(struct sc_rpc_msg_s);
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_SECO;
+ RPC_FUNC(&msg) = (u8)SECO_FUNC_GEN_KEY_BLOB;
+ RPC_U32(&msg, 0U) = (u32)(load_addr >> 32ULL);
+ RPC_U32(&msg, 4U) = (u32)load_addr;
+ RPC_U32(&msg, 8U) = (u32)(export_addr >> 32ULL);
+ RPC_U32(&msg, 12U) = (u32)export_addr;
+ RPC_U32(&msg, 16U) = (u32)id;
+ RPC_U16(&msg, 20U) = (u16)max_size;
+ RPC_SIZE(&msg) = 7U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret) {
+ printf("%s: id: %u, load_addr 0x%llx, export_addr 0x%llx, res:%d\n",
+ __func__, id, load_addr, export_addr, RPC_R8(&msg));
+ }
+
+ return ret;
+}
/*
* Freescale i.MX28 SSP MMC driver
*
+ * Copyright (C) 2019 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*
* (C) Copyright 2003
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*/
+
#include <common.h>
#include <malloc.h>
#include <mmc.h>
#include <asm/mach-imx/dma.h>
#include <bouncebuf.h>
+#define MXSMMC_MAX_TIMEOUT 10000
+#define MXSMMC_SMALL_TRANSFER 512
+
+#if !CONFIG_IS_ENABLED(DM_MMC)
struct mxsmmc_priv {
int id;
- struct mxs_ssp_regs *regs;
- uint32_t buswidth;
int (*mmc_is_wp)(int);
int (*mmc_cd)(int);
- struct mxs_dma_desc *desc;
struct mmc_config cfg; /* mmc configuration */
+ struct mxs_dma_desc *desc;
+ uint32_t buswidth;
+ struct mxs_ssp_regs *regs;
};
+#else /* CONFIG_IS_ENABLED(DM_MMC) */
+#include <dm/device.h>
+#include <dm/read.h>
+#include <dt-structs.h>
+
+#ifdef CONFIG_MX28
+#define dtd_fsl_imx_mmc dtd_fsl_imx28_mmc
+#else /* CONFIG_MX23 */
+#define dtd_fsl_imx_mmc dtd_fsl_imx23_mmc
+#endif
-#define MXSMMC_MAX_TIMEOUT 10000
-#define MXSMMC_SMALL_TRANSFER 512
+struct mxsmmc_platdata {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+ struct dtd_fsl_imx_mmc dtplat;
+#endif
+ struct mmc_config cfg;
+ struct mmc mmc;
+ fdt_addr_t base;
+ int non_removable;
+ int buswidth;
+ int dma_id;
+ int clk_id;
+};
+
+struct mxsmmc_priv {
+ int clkid;
+ struct mxs_dma_desc *desc;
+ u32 buswidth;
+ struct mxs_ssp_regs *regs;
+ unsigned int dma_channel;
+};
+#endif
+
+#if !CONFIG_IS_ENABLED(DM_MMC)
+static int mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+ struct mmc_data *data);
static int mxsmmc_cd(struct mxsmmc_priv *priv)
{
return !(readl(&ssp_regs->hw_ssp_status) & SSP_STATUS_CARD_DETECT);
}
+static int mxsmmc_set_ios(struct mmc *mmc)
+{
+ struct mxsmmc_priv *priv = mmc->priv;
+ struct mxs_ssp_regs *ssp_regs = priv->regs;
+
+ /* Set the clock speed */
+ if (mmc->clock)
+ mxs_set_ssp_busclock(priv->id, mmc->clock / 1000);
+
+ switch (mmc->bus_width) {
+ case 1:
+ priv->buswidth = SSP_CTRL0_BUS_WIDTH_ONE_BIT;
+ break;
+ case 4:
+ priv->buswidth = SSP_CTRL0_BUS_WIDTH_FOUR_BIT;
+ break;
+ case 8:
+ priv->buswidth = SSP_CTRL0_BUS_WIDTH_EIGHT_BIT;
+ break;
+ }
+
+ /* Set the bus width */
+ clrsetbits_le32(&ssp_regs->hw_ssp_ctrl0,
+ SSP_CTRL0_BUS_WIDTH_MASK, priv->buswidth);
+
+ debug("MMC%d: Set %d bits bus width\n",
+ mmc->block_dev.devnum, mmc->bus_width);
+
+ return 0;
+}
+
+static int mxsmmc_init(struct mmc *mmc)
+{
+ struct mxsmmc_priv *priv = mmc->priv;
+ struct mxs_ssp_regs *ssp_regs = priv->regs;
+
+ /* Reset SSP */
+ mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
+
+ /* Reconfigure the SSP block for MMC operation */
+ writel(SSP_CTRL1_SSP_MODE_SD_MMC |
+ SSP_CTRL1_WORD_LENGTH_EIGHT_BITS |
+ SSP_CTRL1_DMA_ENABLE |
+ SSP_CTRL1_POLARITY |
+ SSP_CTRL1_RECV_TIMEOUT_IRQ_EN |
+ SSP_CTRL1_DATA_CRC_IRQ_EN |
+ SSP_CTRL1_DATA_TIMEOUT_IRQ_EN |
+ SSP_CTRL1_RESP_TIMEOUT_IRQ_EN |
+ SSP_CTRL1_RESP_ERR_IRQ_EN,
+ &ssp_regs->hw_ssp_ctrl1_set);
+
+ /* Set initial bit clock 400 KHz */
+ mxs_set_ssp_busclock(priv->id, 400);
+
+ /* Send initial 74 clock cycles (185 us @ 400 KHz)*/
+ writel(SSP_CMD0_CONT_CLKING_EN, &ssp_regs->hw_ssp_cmd0_set);
+ udelay(200);
+ writel(SSP_CMD0_CONT_CLKING_EN, &ssp_regs->hw_ssp_cmd0_clr);
+
+ return 0;
+}
+
+static const struct mmc_ops mxsmmc_ops = {
+ .send_cmd = mxsmmc_send_cmd,
+ .set_ios = mxsmmc_set_ios,
+ .init = mxsmmc_init,
+};
+
+int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int))
+{
+ struct mmc *mmc = NULL;
+ struct mxsmmc_priv *priv = NULL;
+ int ret;
+ const unsigned int mxsmmc_clk_id = mxs_ssp_clock_by_bus(id);
+
+ if (!mxs_ssp_bus_id_valid(id))
+ return -ENODEV;
+
+ priv = malloc(sizeof(struct mxsmmc_priv));
+ if (!priv)
+ return -ENOMEM;
+
+ priv->desc = mxs_dma_desc_alloc();
+ if (!priv->desc) {
+ free(priv);
+ return -ENOMEM;
+ }
+
+ ret = mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + id);
+ if (ret)
+ return ret;
+
+ priv->mmc_is_wp = wp;
+ priv->mmc_cd = cd;
+ priv->id = id;
+ priv->regs = mxs_ssp_regs_by_bus(id);
+
+ priv->cfg.name = "MXS MMC";
+ priv->cfg.ops = &mxsmmc_ops;
+
+ priv->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ priv->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT |
+ MMC_MODE_HS_52MHz | MMC_MODE_HS;
+
+ /*
+ * SSPCLK = 480 * 18 / 29 / 1 = 297.731 MHz
+ * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)),
+ * CLOCK_DIVIDE has to be an even value from 2 to 254, and
+ * CLOCK_RATE could be any integer from 0 to 255.
+ */
+ priv->cfg.f_min = 400000;
+ priv->cfg.f_max = mxc_get_clock(MXC_SSP0_CLK + mxsmmc_clk_id)
+ * 1000 / 2;
+ priv->cfg.b_max = 0x20;
+
+ mmc = mmc_create(&priv->cfg, priv);
+ if (!mmc) {
+ mxs_dma_desc_free(priv->desc);
+ free(priv);
+ return -ENOMEM;
+ }
+ return 0;
+}
+#endif /* CONFIG_IS_ENABLED(DM_MMC) */
+
static int mxsmmc_send_cmd_pio(struct mxsmmc_priv *priv, struct mmc_data *data)
{
struct mxs_ssp_regs *ssp_regs = priv->regs;
priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM |
(data_count << MXS_DMA_DESC_BYTES_OFFSET);
+#if !CONFIG_IS_ENABLED(DM_MMC)
dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id;
+#else
+ dmach = priv->dma_channel;
+#endif
mxs_dma_desc_append(dmach, priv->desc);
if (mxs_dma_go(dmach)) {
bounce_buffer_stop(&bbstate);
return 0;
}
+#if !CONFIG_IS_ENABLED(DM_MMC)
/*
* Sends a command out on the bus. Takes the mmc pointer,
* a command pointer, and an optional data pointer.
{
struct mxsmmc_priv *priv = mmc->priv;
struct mxs_ssp_regs *ssp_regs = priv->regs;
+#else
+static int
+mxsmmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, struct mmc_data *data)
+{
+ struct mxsmmc_platdata *plat = dev_get_platdata(dev);
+ struct mxsmmc_priv *priv = dev_get_priv(dev);
+ struct mxs_ssp_regs *ssp_regs = priv->regs;
+ struct mmc *mmc = &plat->mmc;
+#endif
uint32_t reg;
int timeout;
uint32_t ctrl0;
int ret;
-
- debug("MMC%d: CMD%d\n", mmc->block_dev.devnum, cmd->cmdidx);
+#if !CONFIG_IS_ENABLED(DM_MMC)
+ int devnum = mmc->block_dev.devnum;
+#else
+ int devnum = mmc_get_blk_desc(mmc)->devnum;
+#endif
+ debug("MMC%d: CMD%d\n", devnum, cmd->cmdidx);
/* Check bus busy */
timeout = MXSMMC_MAX_TIMEOUT;
}
if (!timeout) {
- printf("MMC%d: Bus busy timeout!\n", mmc->block_dev.devnum);
+ printf("MMC%d: Bus busy timeout!\n", devnum);
return -ETIMEDOUT;
}
-
+#if !CONFIG_IS_ENABLED(DM_MMC)
/* See if card is present */
if (!mxsmmc_cd(priv)) {
- printf("MMC%d: No card detected!\n", mmc->block_dev.devnum);
+ printf("MMC%d: No card detected!\n", devnum);
return -ENOMEDIUM;
}
-
+#endif
/* Start building CTRL0 contents */
ctrl0 = priv->buswidth;
/* READ or WRITE */
if (data->flags & MMC_DATA_READ) {
ctrl0 |= SSP_CTRL0_READ;
+#if !CONFIG_IS_ENABLED(DM_MMC)
} else if (priv->mmc_is_wp &&
- priv->mmc_is_wp(mmc->block_dev.devnum)) {
- printf("MMC%d: Can not write a locked card!\n",
- mmc->block_dev.devnum);
+ priv->mmc_is_wp(devnum)) {
+ printf("MMC%d: Can not write a locked card!\n", devnum);
return -EOPNOTSUPP;
+#endif
}
-
ctrl0 |= SSP_CTRL0_DATA_XFER;
reg = data->blocksize * data->blocks;
}
if (!timeout) {
- printf("MMC%d: Command %d busy\n",
- mmc->block_dev.devnum, cmd->cmdidx);
+ printf("MMC%d: Command %d busy\n", devnum, cmd->cmdidx);
return -ETIMEDOUT;
}
/* Check command timeout */
if (reg & SSP_STATUS_RESP_TIMEOUT) {
- printf("MMC%d: Command %d timeout (status 0x%08x)\n",
- mmc->block_dev.devnum, cmd->cmdidx, reg);
+ debug("MMC%d: Command %d timeout (status 0x%08x)\n",
+ devnum, cmd->cmdidx, reg);
return -ETIMEDOUT;
}
/* Check command errors */
if (reg & (SSP_STATUS_RESP_CRC_ERR | SSP_STATUS_RESP_ERR)) {
printf("MMC%d: Command %d error (status 0x%08x)!\n",
- mmc->block_dev.devnum, cmd->cmdidx, reg);
+ devnum, cmd->cmdidx, reg);
return -ECOMM;
}
ret = mxsmmc_send_cmd_pio(priv, data);
if (ret) {
printf("MMC%d: Data timeout with command %d "
- "(status 0x%08x)!\n",
- mmc->block_dev.devnum, cmd->cmdidx, reg);
+ "(status 0x%08x)!\n", devnum, cmd->cmdidx, reg);
return ret;
}
} else {
ret = mxsmmc_send_cmd_dma(priv, data);
if (ret) {
- printf("MMC%d: DMA transfer failed\n",
- mmc->block_dev.devnum);
+ printf("MMC%d: DMA transfer failed\n", devnum);
return ret;
}
}
(SSP_STATUS_TIMEOUT | SSP_STATUS_DATA_CRC_ERR |
SSP_STATUS_FIFO_OVRFLW | SSP_STATUS_FIFO_UNDRFLW)) {
printf("MMC%d: Data error with command %d (status 0x%08x)!\n",
- mmc->block_dev.devnum, cmd->cmdidx, reg);
+ devnum, cmd->cmdidx, reg);
return -ECOMM;
}
return 0;
}
-static int mxsmmc_set_ios(struct mmc *mmc)
+#if CONFIG_IS_ENABLED(DM_MMC)
+/* Base numbers of i.MX2[38] clk for ssp0 IP block */
+#define MXS_SSP_IMX23_CLKID_SSP0 33
+#define MXS_SSP_IMX28_CLKID_SSP0 46
+
+static int mxsmmc_get_cd(struct udevice *dev)
{
- struct mxsmmc_priv *priv = mmc->priv;
+ struct mxsmmc_platdata *plat = dev_get_platdata(dev);
+ struct mxsmmc_priv *priv = dev_get_priv(dev);
+ struct mxs_ssp_regs *ssp_regs = priv->regs;
+
+ if (plat->non_removable)
+ return 1;
+
+ return !(readl(&ssp_regs->hw_ssp_status) & SSP_STATUS_CARD_DETECT);
+}
+
+static int mxsmmc_set_ios(struct udevice *dev)
+{
+ struct mxsmmc_platdata *plat = dev_get_platdata(dev);
+ struct mxsmmc_priv *priv = dev_get_priv(dev);
struct mxs_ssp_regs *ssp_regs = priv->regs;
+ struct mmc *mmc = &plat->mmc;
/* Set the clock speed */
if (mmc->clock)
- mxs_set_ssp_busclock(priv->id, mmc->clock / 1000);
+ mxs_set_ssp_busclock(priv->clkid, mmc->clock / 1000);
switch (mmc->bus_width) {
case 1:
clrsetbits_le32(&ssp_regs->hw_ssp_ctrl0,
SSP_CTRL0_BUS_WIDTH_MASK, priv->buswidth);
- debug("MMC%d: Set %d bits bus width\n",
- mmc->block_dev.devnum, mmc->bus_width);
+ debug("MMC%d: Set %d bits bus width\n", mmc_get_blk_desc(mmc)->devnum,
+ mmc->bus_width);
return 0;
}
-static int mxsmmc_init(struct mmc *mmc)
+static int mxsmmc_init(struct udevice *dev)
{
- struct mxsmmc_priv *priv = mmc->priv;
+ struct mxsmmc_priv *priv = dev_get_priv(dev);
struct mxs_ssp_regs *ssp_regs = priv->regs;
/* Reset SSP */
&ssp_regs->hw_ssp_ctrl1_set);
/* Set initial bit clock 400 KHz */
- mxs_set_ssp_busclock(priv->id, 400);
+ mxs_set_ssp_busclock(priv->clkid, 400);
/* Send initial 74 clock cycles (185 us @ 400 KHz)*/
writel(SSP_CMD0_CONT_CLKING_EN, &ssp_regs->hw_ssp_cmd0_set);
return 0;
}
-static const struct mmc_ops mxsmmc_ops = {
- .send_cmd = mxsmmc_send_cmd,
- .set_ios = mxsmmc_set_ios,
- .init = mxsmmc_init,
-};
-
-int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int))
+static int mxsmmc_probe(struct udevice *dev)
{
- struct mmc *mmc = NULL;
- struct mxsmmc_priv *priv = NULL;
- int ret;
- const unsigned int mxsmmc_clk_id = mxs_ssp_clock_by_bus(id);
-
- if (!mxs_ssp_bus_id_valid(id))
- return -ENODEV;
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct mxsmmc_platdata *plat = dev_get_platdata(dev);
+ struct mxsmmc_priv *priv = dev_get_priv(dev);
+ struct blk_desc *bdesc;
+ struct mmc *mmc;
+ int ret, clkid;
+
+ debug("%s: probe\n", __func__);
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+ struct dtd_fsl_imx_mmc *dtplat = &plat->dtplat;
+ struct phandle_1_arg *p1a = &dtplat->clocks[0];
+
+ priv->buswidth = dtplat->bus_width;
+ priv->regs = (struct mxs_ssp_regs *)dtplat->reg[0];
+ priv->dma_channel = dtplat->dmas[1];
+ clkid = p1a->arg[0];
+ plat->non_removable = dtplat->non_removable;
+
+ debug("OF_PLATDATA: regs: 0x%p bw: %d clkid: %d non_removable: %d\n",
+ priv->regs, priv->buswidth, clkid, plat->non_removable);
+#else
+ priv->regs = (struct mxs_ssp_regs *)plat->base;
+ priv->dma_channel = plat->dma_id;
+ clkid = plat->clk_id;
+#endif
- priv = malloc(sizeof(struct mxsmmc_priv));
- if (!priv)
- return -ENOMEM;
+#ifdef CONFIG_MX28
+ priv->clkid = clkid - MXS_SSP_IMX28_CLKID_SSP0;
+#else /* CONFIG_MX23 */
+ priv->clkid = clkid - MXS_SSP_IMX23_CLKID_SSP0;
+#endif
+ mmc = &plat->mmc;
+ mmc->cfg = &plat->cfg;
+ mmc->dev = dev;
priv->desc = mxs_dma_desc_alloc();
if (!priv->desc) {
- free(priv);
+ printf("%s: Cannot allocate DMA descriptor\n", __func__);
return -ENOMEM;
}
- ret = mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + id);
+ ret = mxs_dma_init_channel(priv->dma_channel);
if (ret)
return ret;
- priv->mmc_is_wp = wp;
- priv->mmc_cd = cd;
- priv->id = id;
- priv->regs = mxs_ssp_regs_by_bus(id);
-
- priv->cfg.name = "MXS MMC";
- priv->cfg.ops = &mxsmmc_ops;
+ plat->cfg.name = "MXS MMC";
+ plat->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
- priv->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
-
- priv->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT |
- MMC_MODE_HS_52MHz | MMC_MODE_HS;
+ plat->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT |
+ MMC_MODE_HS_52MHz | MMC_MODE_HS;
/*
* SSPCLK = 480 * 18 / 29 / 1 = 297.731 MHz
* CLOCK_DIVIDE has to be an even value from 2 to 254, and
* CLOCK_RATE could be any integer from 0 to 255.
*/
- priv->cfg.f_min = 400000;
- priv->cfg.f_max = mxc_get_clock(MXC_SSP0_CLK + mxsmmc_clk_id) * 1000 / 2;
- priv->cfg.b_max = 0x20;
+ plat->cfg.f_min = 400000;
+ plat->cfg.f_max = mxc_get_clock(MXC_SSP0_CLK + priv->clkid) * 1000 / 2;
+ plat->cfg.b_max = 0x20;
- mmc = mmc_create(&priv->cfg, priv);
- if (mmc == NULL) {
- mxs_dma_desc_free(priv->desc);
- free(priv);
- return -ENOMEM;
+ bdesc = mmc_get_blk_desc(mmc);
+ if (!bdesc) {
+ printf("%s: No block device descriptor!\n", __func__);
+ return -ENODEV;
+ }
+
+ if (plat->non_removable)
+ bdesc->removable = 0;
+
+ ret = mxsmmc_init(dev);
+ if (ret)
+ printf("%s: MMC%d init error %d\n", __func__,
+ bdesc->devnum, ret);
+
+ /* Set the initial clock speed */
+ mmc_set_clock(mmc, 400000, MMC_CLK_ENABLE);
+
+ upriv->mmc = mmc;
+
+ return 0;
+};
+
+#if CONFIG_IS_ENABLED(BLK)
+static int mxsmmc_bind(struct udevice *dev)
+{
+ struct mxsmmc_platdata *plat = dev_get_platdata(dev);
+
+ return mmc_bind(dev, &plat->mmc, &plat->cfg);
+}
+#endif
+
+static const struct dm_mmc_ops mxsmmc_ops = {
+ .get_cd = mxsmmc_get_cd,
+ .send_cmd = mxsmmc_send_cmd,
+ .set_ios = mxsmmc_set_ios,
+};
+
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
+static int mxsmmc_ofdata_to_platdata(struct udevice *bus)
+{
+ struct mxsmmc_platdata *plat = bus->platdata;
+ u32 prop[2];
+ int ret;
+
+ plat->base = dev_read_addr(bus);
+ plat->buswidth =
+ dev_read_u32_default(bus, "bus-width", 1);
+ plat->non_removable = dev_read_bool(bus, "non-removable");
+
+ ret = dev_read_u32_array(bus, "dmas", prop, ARRAY_SIZE(prop));
+ if (ret) {
+ printf("%s: Reading 'dmas' property failed!\n", __func__);
+ return ret;
+ }
+ plat->dma_id = prop[1];
+
+ ret = dev_read_u32_array(bus, "clocks", prop, ARRAY_SIZE(prop));
+ if (ret) {
+ printf("%s: Reading 'clocks' property failed!\n", __func__);
+ return ret;
}
+ plat->clk_id = prop[1];
+
+ debug("%s: base=0x%x, bus_width=%d %s dma_id=%d clk_id=%d\n",
+ __func__, (uint)plat->base, plat->buswidth,
+ plat->non_removable ? "non-removable" : NULL,
+ plat->dma_id, plat->clk_id);
+
return 0;
}
+
+static const struct udevice_id mxsmmc_ids[] = {
+ { .compatible = "fsl,imx23-mmc", },
+ { .compatible = "fsl,imx28-mmc", },
+ { /* sentinel */ }
+};
+#endif
+
+U_BOOT_DRIVER(mxsmmc) = {
+#ifdef CONFIG_MX28
+ .name = "fsl_imx28_mmc",
+#else /* CONFIG_MX23 */
+ .name = "fsl_imx23_mmc",
+#endif
+ .id = UCLASS_MMC,
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
+ .of_match = mxsmmc_ids,
+ .ofdata_to_platdata = mxsmmc_ofdata_to_platdata,
+#endif
+ .ops = &mxsmmc_ops,
+#if CONFIG_IS_ENABLED(BLK)
+ .bind = mxsmmc_bind,
+#endif
+ .probe = mxsmmc_probe,
+ .priv_auto_alloc_size = sizeof(struct mxsmmc_priv),
+ .platdata_auto_alloc_size = sizeof(struct mxsmmc_platdata),
+};
+
+#endif /* CONFIG_DM_MMC */
if (info->flags & IMX8_USE_SCU)
return 0;
- addr = fdtdec_get_addr_size(gd->fdt_blob, dev_of_offset(dev), "reg",
- &size);
-
+ addr = devfdt_get_addr_size_index(dev, 0, &size);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
.remove = imx_pinctrl_remove,
.priv_auto_alloc_size = sizeof(struct imx_pinctrl_priv),
.ops = &imx_pinctrl_ops,
-#if !CONFIG_IS_ENABLED(OF_CONTROL)
.flags = DM_FLAG_PRE_RELOC,
-#endif
};
.remove = imx_pinctrl_remove,
.priv_auto_alloc_size = sizeof(struct imx_pinctrl_priv),
.ops = &imx_pinctrl_ops,
-#if !CONFIG_IS_ENABLED(OF_CONTROL)
.flags = DM_FLAG_PRE_RELOC,
-#endif
};
.remove = imx_pinctrl_remove,
.priv_auto_alloc_size = sizeof(struct imx_pinctrl_priv),
.ops = &imx_pinctrl_ops,
-#if !CONFIG_IS_ENABLED(OF_CONTROL)
.flags = DM_FLAG_PRE_RELOC,
-#endif
};
.remove = imx_pinctrl_remove,
.priv_auto_alloc_size = sizeof(struct imx_pinctrl_priv),
.ops = &imx_pinctrl_ops,
-#if !CONFIG_IS_ENABLED(OF_CONTROL)
.flags = DM_FLAG_PRE_RELOC,
-#endif
};
Enable support for manipulating NXP i.MX8 on-SoC power domains via IPC
requests to the SCU.
+config IMX8M_POWER_DOMAIN
+ bool "Enable i.MX8M power domain driver"
+ depends on POWER_DOMAIN && ARCH_IMX8M
+ help
+ Enable support for manipulating NXP i.MX8M on-SoC power domains via
+ requests to the ATF.
+
config MTK_POWER_DOMAIN
bool "Enable the MediaTek power domain driver"
depends on POWER_DOMAIN && ARCH_MEDIATEK
obj-$(CONFIG_$(SPL_)POWER_DOMAIN) += power-domain-uclass.o
obj-$(CONFIG_BCM6328_POWER_DOMAIN) += bcm6328-power-domain.o
obj-$(CONFIG_IMX8_POWER_DOMAIN) += imx8-power-domain.o
+obj-$(CONFIG_IMX8M_POWER_DOMAIN) += imx8m-power-domain.o
obj-$(CONFIG_MTK_POWER_DOMAIN) += mtk-power-domain.o
obj-$(CONFIG_MESON_GX_VPU_POWER_DOMAIN) += meson-gx-pwrc-vpu.o
obj-$(CONFIG_SANDBOX_POWER_DOMAIN) += sandbox-power-domain.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2017 NXP
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <power-domain-uclass.h>
+#include <asm/io.h>
+#include <asm/arch/power-domain.h>
+#include <asm/mach-imx/sys_proto.h>
+#include <dm/device-internal.h>
+#include <dm/device.h>
+#include <imx_sip.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int imx8m_power_domain_request(struct power_domain *power_domain)
+{
+ return 0;
+}
+
+static int imx8m_power_domain_free(struct power_domain *power_domain)
+{
+ return 0;
+}
+
+static int imx8m_power_domain_on(struct power_domain *power_domain)
+{
+ struct udevice *dev = power_domain->dev;
+ struct imx8m_power_domain_platdata *pdata;
+ pdata = dev_get_platdata(dev);
+
+ if (pdata->resource_id < 0)
+ return -EINVAL;
+
+ if (pdata->has_pd)
+ power_domain_on(&pdata->pd);
+
+ call_imx_sip(IMX_SIP_GPC, IMX_SIP_GPC_PM_DOMAIN, pdata->resource_id, 1);
+
+ return 0;
+}
+
+static int imx8m_power_domain_off(struct power_domain *power_domain)
+{
+ struct udevice *dev = power_domain->dev;
+ struct imx8m_power_domain_platdata *pdata;
+ pdata = dev_get_platdata(dev);
+
+ if (pdata->resource_id < 0)
+ return -EINVAL;
+
+ call_imx_sip(IMX_SIP_GPC, IMX_SIP_GPC_PM_DOMAIN, pdata->resource_id, 0);
+
+ if (pdata->has_pd)
+ power_domain_off(&pdata->pd);
+
+ return 0;
+}
+
+static int imx8m_power_domain_of_xlate(struct power_domain *power_domain,
+ struct ofnode_phandle_args *args)
+{
+ return 0;
+}
+
+static int imx8m_power_domain_bind(struct udevice *dev)
+{
+ int offset;
+ const char *name;
+ int ret = 0;
+
+ offset = dev_of_offset(dev);
+ for (offset = fdt_first_subnode(gd->fdt_blob, offset); offset > 0;
+ offset = fdt_next_subnode(gd->fdt_blob, offset)) {
+ /* Bind the subnode to this driver */
+ name = fdt_get_name(gd->fdt_blob, offset, NULL);
+
+ ret = device_bind_with_driver_data(dev, dev->driver, name,
+ dev->driver_data,
+ offset_to_ofnode(offset),
+ NULL);
+
+ if (ret == -ENODEV)
+ printf("Driver '%s' refuses to bind\n",
+ dev->driver->name);
+
+ if (ret)
+ printf("Error binding driver '%s': %d\n",
+ dev->driver->name, ret);
+ }
+
+ return 0;
+}
+
+static int imx8m_power_domain_probe(struct udevice *dev)
+{
+ return 0;
+}
+
+static int imx8m_power_domain_ofdata_to_platdata(struct udevice *dev)
+{
+ struct imx8m_power_domain_platdata *pdata = dev_get_platdata(dev);
+
+ pdata->resource_id = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
+ "reg", -1);
+
+ if (!power_domain_get(dev, &pdata->pd))
+ pdata->has_pd = 1;
+
+ return 0;
+}
+
+static const struct udevice_id imx8m_power_domain_ids[] = {
+ { .compatible = "fsl,imx8mq-gpc" },
+ { }
+};
+
+struct power_domain_ops imx8m_power_domain_ops = {
+ .request = imx8m_power_domain_request,
+ .free = imx8m_power_domain_free,
+ .on = imx8m_power_domain_on,
+ .off = imx8m_power_domain_off,
+ .of_xlate = imx8m_power_domain_of_xlate,
+};
+
+U_BOOT_DRIVER(imx8m_power_domain) = {
+ .name = "imx8m_power_domain",
+ .id = UCLASS_POWER_DOMAIN,
+ .of_match = imx8m_power_domain_ids,
+ .bind = imx8m_power_domain_bind,
+ .probe = imx8m_power_domain_probe,
+ .ofdata_to_platdata = imx8m_power_domain_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct imx8m_power_domain_platdata),
+ .ops = &imx8m_power_domain_ops,
+};
help
Support for reset controller on HiSilicon SoCs.
+config RESET_IMX7
+ bool "i.MX7/8 Reset Driver"
+ depends on DM_RESET && (ARCH_MX7 || ARCH_IMX8M)
+ default y
+ help
+ Support for reset controller on i.MX7/8 SoCs.
+
endmenu
obj-$(CONFIG_RESET_MEDIATEK) += reset-mediatek.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
obj-$(CONFIG_RESET_HISILICON) += reset-hisilicon.o
+obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017, Impinj, Inc.
+ */
+
+#include <asm/io.h>
+#include <common.h>
+#include <dm.h>
+#include <dt-bindings/reset/imx7-reset.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
+#include <reset-uclass.h>
+
+struct imx7_reset_priv {
+ void __iomem *base;
+ struct reset_ops ops;
+};
+
+struct imx7_src_signal {
+ unsigned int offset, bit;
+};
+
+enum imx7_src_registers {
+ SRC_A7RCR0 = 0x0004,
+ SRC_M4RCR = 0x000c,
+ SRC_ERCR = 0x0014,
+ SRC_HSICPHY_RCR = 0x001c,
+ SRC_USBOPHY1_RCR = 0x0020,
+ SRC_USBOPHY2_RCR = 0x0024,
+ SRC_MIPIPHY_RCR = 0x0028,
+ SRC_PCIEPHY_RCR = 0x002c,
+ SRC_DDRC_RCR = 0x1000,
+};
+
+static const struct imx7_src_signal imx7_src_signals[IMX7_RESET_NUM] = {
+ [IMX7_RESET_A7_CORE_POR_RESET0] = { SRC_A7RCR0, BIT(0) },
+ [IMX7_RESET_A7_CORE_POR_RESET1] = { SRC_A7RCR0, BIT(1) },
+ [IMX7_RESET_A7_CORE_RESET0] = { SRC_A7RCR0, BIT(4) },
+ [IMX7_RESET_A7_CORE_RESET1] = { SRC_A7RCR0, BIT(5) },
+ [IMX7_RESET_A7_DBG_RESET0] = { SRC_A7RCR0, BIT(8) },
+ [IMX7_RESET_A7_DBG_RESET1] = { SRC_A7RCR0, BIT(9) },
+ [IMX7_RESET_A7_ETM_RESET0] = { SRC_A7RCR0, BIT(12) },
+ [IMX7_RESET_A7_ETM_RESET1] = { SRC_A7RCR0, BIT(13) },
+ [IMX7_RESET_A7_SOC_DBG_RESET] = { SRC_A7RCR0, BIT(20) },
+ [IMX7_RESET_A7_L2RESET] = { SRC_A7RCR0, BIT(21) },
+ [IMX7_RESET_SW_M4C_RST] = { SRC_M4RCR, BIT(1) },
+ [IMX7_RESET_SW_M4P_RST] = { SRC_M4RCR, BIT(2) },
+ [IMX7_RESET_EIM_RST] = { SRC_ERCR, BIT(0) },
+ [IMX7_RESET_HSICPHY_PORT_RST] = { SRC_HSICPHY_RCR, BIT(1) },
+ [IMX7_RESET_USBPHY1_POR] = { SRC_USBOPHY1_RCR, BIT(0) },
+ [IMX7_RESET_USBPHY1_PORT_RST] = { SRC_USBOPHY1_RCR, BIT(1) },
+ [IMX7_RESET_USBPHY2_POR] = { SRC_USBOPHY2_RCR, BIT(0) },
+ [IMX7_RESET_USBPHY2_PORT_RST] = { SRC_USBOPHY2_RCR, BIT(1) },
+ [IMX7_RESET_MIPI_PHY_MRST] = { SRC_MIPIPHY_RCR, BIT(1) },
+ [IMX7_RESET_MIPI_PHY_SRST] = { SRC_MIPIPHY_RCR, BIT(2) },
+ [IMX7_RESET_PCIEPHY] = { SRC_PCIEPHY_RCR, BIT(2) | BIT(1) },
+ [IMX7_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR, BIT(3) },
+ [IMX7_RESET_PCIE_CTRL_APPS_EN] = { SRC_PCIEPHY_RCR, BIT(6) },
+ [IMX7_RESET_PCIE_CTRL_APPS_TURNOFF] = { SRC_PCIEPHY_RCR, BIT(11) },
+ [IMX7_RESET_DDRC_PRST] = { SRC_DDRC_RCR, BIT(0) },
+ [IMX7_RESET_DDRC_CORE_RST] = { SRC_DDRC_RCR, BIT(1) },
+};
+
+static int imx7_reset_deassert_imx7(struct reset_ctl *rst)
+{
+ struct imx7_reset_priv *priv = dev_get_priv(rst->dev);
+ const struct imx7_src_signal *sig = imx7_src_signals;
+ u32 val;
+
+ if (rst->id >= IMX7_RESET_NUM)
+ return -EINVAL;
+
+ if (rst->id == IMX7_RESET_PCIEPHY) {
+ /*
+ * wait for more than 10us to release phy g_rst and
+ * btnrst
+ */
+ udelay(10);
+ }
+
+ val = readl(priv->base + sig[rst->id].offset);
+ switch (rst->id) {
+ case IMX7_RESET_PCIE_CTRL_APPS_EN:
+ val |= sig[rst->id].bit;
+ break;
+ default:
+ val &= ~sig[rst->id].bit;
+ break;
+ }
+ writel(val, priv->base + sig[rst->id].offset);
+
+ return 0;
+}
+
+static int imx7_reset_assert_imx7(struct reset_ctl *rst)
+{
+ struct imx7_reset_priv *priv = dev_get_priv(rst->dev);
+ const struct imx7_src_signal *sig = imx7_src_signals;
+ u32 val;
+
+ if (rst->id >= IMX7_RESET_NUM)
+ return -EINVAL;
+
+ val = readl(priv->base + sig[rst->id].offset);
+ switch (rst->id) {
+ case IMX7_RESET_PCIE_CTRL_APPS_EN:
+ val &= ~sig[rst->id].bit;
+ break;
+ default:
+ val |= sig[rst->id].bit;
+ break;
+ }
+ writel(val, priv->base + sig[rst->id].offset);
+
+ return 0;
+}
+
+enum imx8mq_src_registers {
+ SRC_A53RCR0 = 0x0004,
+ SRC_HDMI_RCR = 0x0030,
+ SRC_DISP_RCR = 0x0034,
+ SRC_GPU_RCR = 0x0040,
+ SRC_VPU_RCR = 0x0044,
+ SRC_PCIE2_RCR = 0x0048,
+ SRC_MIPIPHY1_RCR = 0x004c,
+ SRC_MIPIPHY2_RCR = 0x0050,
+ SRC_DDRC2_RCR = 0x1004,
+};
+
+static const struct imx7_src_signal imx8mq_src_signals[IMX8MQ_RESET_NUM] = {
+ [IMX8MQ_RESET_A53_CORE_POR_RESET0] = { SRC_A53RCR0, BIT(0) },
+ [IMX8MQ_RESET_A53_CORE_POR_RESET1] = { SRC_A53RCR0, BIT(1) },
+ [IMX8MQ_RESET_A53_CORE_POR_RESET2] = { SRC_A53RCR0, BIT(2) },
+ [IMX8MQ_RESET_A53_CORE_POR_RESET3] = { SRC_A53RCR0, BIT(3) },
+ [IMX8MQ_RESET_A53_CORE_RESET0] = { SRC_A53RCR0, BIT(4) },
+ [IMX8MQ_RESET_A53_CORE_RESET1] = { SRC_A53RCR0, BIT(5) },
+ [IMX8MQ_RESET_A53_CORE_RESET2] = { SRC_A53RCR0, BIT(6) },
+ [IMX8MQ_RESET_A53_CORE_RESET3] = { SRC_A53RCR0, BIT(7) },
+ [IMX8MQ_RESET_A53_DBG_RESET0] = { SRC_A53RCR0, BIT(8) },
+ [IMX8MQ_RESET_A53_DBG_RESET1] = { SRC_A53RCR0, BIT(9) },
+ [IMX8MQ_RESET_A53_DBG_RESET2] = { SRC_A53RCR0, BIT(10) },
+ [IMX8MQ_RESET_A53_DBG_RESET3] = { SRC_A53RCR0, BIT(11) },
+ [IMX8MQ_RESET_A53_ETM_RESET0] = { SRC_A53RCR0, BIT(12) },
+ [IMX8MQ_RESET_A53_ETM_RESET1] = { SRC_A53RCR0, BIT(13) },
+ [IMX8MQ_RESET_A53_ETM_RESET2] = { SRC_A53RCR0, BIT(14) },
+ [IMX8MQ_RESET_A53_ETM_RESET3] = { SRC_A53RCR0, BIT(15) },
+ [IMX8MQ_RESET_A53_SOC_DBG_RESET] = { SRC_A53RCR0, BIT(20) },
+ [IMX8MQ_RESET_A53_L2RESET] = { SRC_A53RCR0, BIT(21) },
+ [IMX8MQ_RESET_SW_NON_SCLR_M4C_RST] = { SRC_M4RCR, BIT(0) },
+ [IMX8MQ_RESET_OTG1_PHY_RESET] = { SRC_USBOPHY1_RCR, BIT(0) },
+ [IMX8MQ_RESET_OTG2_PHY_RESET] = { SRC_USBOPHY2_RCR, BIT(0) },
+ [IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N] = { SRC_MIPIPHY_RCR, BIT(1) },
+ [IMX8MQ_RESET_MIPI_DSI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(2) },
+ [IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(3) },
+ [IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N] = { SRC_MIPIPHY_RCR, BIT(4) },
+ [IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N] = { SRC_MIPIPHY_RCR, BIT(5) },
+ [IMX8MQ_RESET_PCIEPHY] = { SRC_PCIEPHY_RCR,
+ BIT(2) | BIT(1) },
+ [IMX8MQ_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR, BIT(3) },
+ [IMX8MQ_RESET_PCIE_CTRL_APPS_EN] = { SRC_PCIEPHY_RCR, BIT(6) },
+ [IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF] = { SRC_PCIEPHY_RCR, BIT(11) },
+ [IMX8MQ_RESET_HDMI_PHY_APB_RESET] = { SRC_HDMI_RCR, BIT(0) },
+ [IMX8MQ_RESET_DISP_RESET] = { SRC_DISP_RCR, BIT(0) },
+ [IMX8MQ_RESET_GPU_RESET] = { SRC_GPU_RCR, BIT(0) },
+ [IMX8MQ_RESET_VPU_RESET] = { SRC_VPU_RCR, BIT(0) },
+ [IMX8MQ_RESET_PCIEPHY2] = { SRC_PCIE2_RCR,
+ BIT(2) | BIT(1) },
+ [IMX8MQ_RESET_PCIEPHY2_PERST] = { SRC_PCIE2_RCR, BIT(3) },
+ [IMX8MQ_RESET_PCIE2_CTRL_APPS_EN] = { SRC_PCIE2_RCR, BIT(6) },
+ [IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF] = { SRC_PCIE2_RCR, BIT(11) },
+ [IMX8MQ_RESET_MIPI_CSI1_CORE_RESET] = { SRC_MIPIPHY1_RCR, BIT(0) },
+ [IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET] = { SRC_MIPIPHY1_RCR, BIT(1) },
+ [IMX8MQ_RESET_MIPI_CSI1_ESC_RESET] = { SRC_MIPIPHY1_RCR, BIT(2) },
+ [IMX8MQ_RESET_MIPI_CSI2_CORE_RESET] = { SRC_MIPIPHY2_RCR, BIT(0) },
+ [IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET] = { SRC_MIPIPHY2_RCR, BIT(1) },
+ [IMX8MQ_RESET_MIPI_CSI2_ESC_RESET] = { SRC_MIPIPHY2_RCR, BIT(2) },
+ [IMX8MQ_RESET_DDRC1_PRST] = { SRC_DDRC_RCR, BIT(0) },
+ [IMX8MQ_RESET_DDRC1_CORE_RESET] = { SRC_DDRC_RCR, BIT(1) },
+ [IMX8MQ_RESET_DDRC1_PHY_RESET] = { SRC_DDRC_RCR, BIT(2) },
+ [IMX8MQ_RESET_DDRC2_PHY_RESET] = { SRC_DDRC2_RCR, BIT(0) },
+ [IMX8MQ_RESET_DDRC2_CORE_RESET] = { SRC_DDRC2_RCR, BIT(1) },
+ [IMX8MQ_RESET_DDRC2_PRST] = { SRC_DDRC2_RCR, BIT(2) },
+};
+
+static int imx7_reset_deassert_imx8mq(struct reset_ctl *rst)
+{
+ struct imx7_reset_priv *priv = dev_get_priv(rst->dev);
+ const struct imx7_src_signal *sig = imx8mq_src_signals;
+ u32 val;
+
+ if (rst->id >= IMX8MQ_RESET_NUM)
+ return -EINVAL;
+
+ if (rst->id == IMX8MQ_RESET_PCIEPHY ||
+ rst->id == IMX8MQ_RESET_PCIEPHY2) {
+ /*
+ * wait for more than 10us to release phy g_rst and
+ * btnrst
+ */
+ udelay(10);
+ }
+
+ val = readl(priv->base + sig[rst->id].offset);
+ switch (rst->id) {
+ case IMX8MQ_RESET_PCIE_CTRL_APPS_EN:
+ case IMX8MQ_RESET_PCIE2_CTRL_APPS_EN: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N: /* fallthrough */
+ val |= sig[rst->id].bit;
+ break;
+ default:
+ val &= ~sig[rst->id].bit;
+ break;
+ }
+ writel(val, priv->base + sig[rst->id].offset);
+
+ return 0;
+}
+
+static int imx7_reset_assert_imx8mq(struct reset_ctl *rst)
+{
+ struct imx7_reset_priv *priv = dev_get_priv(rst->dev);
+ const struct imx7_src_signal *sig = imx8mq_src_signals;
+ u32 val;
+
+ if (rst->id >= IMX8MQ_RESET_NUM)
+ return -EINVAL;
+
+ val = readl(priv->base + sig[rst->id].offset);
+ switch (rst->id) {
+ case IMX8MQ_RESET_PCIE_CTRL_APPS_EN:
+ case IMX8MQ_RESET_PCIE2_CTRL_APPS_EN: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_RESET_N: /* fallthrough */
+ case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N: /* fallthrough */
+ val &= ~sig[rst->id].bit;
+ break;
+ default:
+ val |= sig[rst->id].bit;
+ break;
+ }
+ writel(val, priv->base + sig[rst->id].offset);
+
+ return 0;
+}
+
+static int imx7_reset_assert(struct reset_ctl *rst)
+{
+ struct imx7_reset_priv *priv = dev_get_priv(rst->dev);
+ return priv->ops.rst_assert(rst);
+}
+
+static int imx7_reset_deassert(struct reset_ctl *rst)
+{
+ struct imx7_reset_priv *priv = dev_get_priv(rst->dev);
+ return priv->ops.rst_deassert(rst);
+}
+
+static int imx7_reset_free(struct reset_ctl *rst)
+{
+ return 0;
+}
+
+static int imx7_reset_request(struct reset_ctl *rst)
+{
+ return 0;
+}
+
+static const struct reset_ops imx7_reset_reset_ops = {
+ .request = imx7_reset_request,
+ .free = imx7_reset_free,
+ .rst_assert = imx7_reset_assert,
+ .rst_deassert = imx7_reset_deassert,
+};
+
+static const struct udevice_id imx7_reset_ids[] = {
+ { .compatible = "fsl,imx7d-src" },
+ { .compatible = "fsl,imx8mq-src" },
+ { }
+};
+
+static int imx7_reset_probe(struct udevice *dev)
+{
+ struct imx7_reset_priv *priv = dev_get_priv(dev);
+
+ priv->base = dev_remap_addr(dev);
+ if (!priv->base)
+ return -ENOMEM;
+
+ if (device_is_compatible(dev, "fsl,imx8mq-src")) {
+ priv->ops.rst_assert = imx7_reset_assert_imx8mq;
+ priv->ops.rst_deassert = imx7_reset_deassert_imx8mq;
+ } else if (device_is_compatible(dev, "fsl,imx7d-src")) {
+ priv->ops.rst_assert = imx7_reset_assert_imx7;
+ priv->ops.rst_deassert = imx7_reset_deassert_imx7;
+ }
+
+ return 0;
+}
+
+U_BOOT_DRIVER(imx7_reset) = {
+ .name = "imx7_reset",
+ .id = UCLASS_RESET,
+ .of_match = imx7_reset_ids,
+ .ops = &imx7_reset_reset_ops,
+ .probe = imx7_reset_probe,
+ .priv_auto_alloc_size = sizeof(struct imx7_reset_priv),
+};
config MXC_UART
bool "IMX serial port support"
- depends on MX5 || MX6
+ depends on MX5 || MX6 || MX7 || IMX8M
help
If you have a machine based on a Motorola IMX CPU you
can enable its onboard serial port by enabling this option.
DECLARE_GLOBAL_DATA_PTR;
-#define RX_BUFFER_SIZE 0x80
-#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
- defined(CONFIG_MX6ULL) || defined(CONFIG_MX7D)
-#define TX_BUFFER_SIZE 0x200
-#else
-#define TX_BUFFER_SIZE 0x40
-#endif
-
#define OFFSET_BITS_MASK GENMASK(23, 0)
#define FLASH_STATUS_WEL 0x02
/* QSPI max chipselect signals number */
#define FSL_QSPI_MAX_CHIPSELECT_NUM 4
+/* Controller needs driver to swap endian */
+#define QUADSPI_QUIRK_SWAP_ENDIAN BIT(0)
+
+enum fsl_qspi_devtype {
+ FSL_QUADSPI_VYBRID,
+ FSL_QUADSPI_IMX6SX,
+ FSL_QUADSPI_IMX6UL_7D,
+ FSL_QUADSPI_IMX7ULP,
+};
+
+struct fsl_qspi_devtype_data {
+ enum fsl_qspi_devtype devtype;
+ u32 rxfifo;
+ u32 txfifo;
+ u32 ahb_buf_size;
+ u32 driver_data;
+};
+
/**
* struct fsl_qspi_platdata - platform data for Freescale QSPI
*
u32 flash_num;
u32 num_chipselect;
struct fsl_qspi_regs *regs;
+ struct fsl_qspi_devtype_data *devtype_data;
+};
+
+static const struct fsl_qspi_devtype_data vybrid_data = {
+ .devtype = FSL_QUADSPI_VYBRID,
+ .rxfifo = 128,
+ .txfifo = 64,
+ .ahb_buf_size = 1024,
+ .driver_data = QUADSPI_QUIRK_SWAP_ENDIAN,
};
+static const struct fsl_qspi_devtype_data imx6sx_data = {
+ .devtype = FSL_QUADSPI_IMX6SX,
+ .rxfifo = 128,
+ .txfifo = 512,
+ .ahb_buf_size = 1024,
+ .driver_data = 0,
+};
+
+static const struct fsl_qspi_devtype_data imx6ul_7d_data = {
+ .devtype = FSL_QUADSPI_IMX6UL_7D,
+ .rxfifo = 128,
+ .txfifo = 512,
+ .ahb_buf_size = 1024,
+ .driver_data = 0,
+};
+
+static const struct fsl_qspi_devtype_data imx7ulp_data = {
+ .devtype = FSL_QUADSPI_IMX7ULP,
+ .rxfifo = 64,
+ .txfifo = 64,
+ .ahb_buf_size = 128,
+ .driver_data = 0,
+};
static u32 qspi_read32(u32 flags, u32 *addr)
{
/* QSPI support swapping the flash read/write data
* in hardware for LS102xA, but not for VF610 */
-static inline u32 qspi_endian_xchg(u32 data)
+static inline u32 qspi_endian_xchg(struct fsl_qspi_priv *priv, u32 data)
{
-#ifdef CONFIG_VF610
- return swab32(data);
-#else
- return data;
-#endif
+ if (priv->devtype_data->driver_data & QUADSPI_QUIRK_SWAP_ENDIAN)
+ return swab32(data);
+ else
+ return data;
}
static void qspi_set_lut(struct fsl_qspi_priv *priv)
#endif
qspi_write32(priv->flags, ®s->lut[lut_base + 1],
OPRND0(8) | PAD0(LUT_PAD1) | INSTR0(LUT_DUMMY) |
- OPRND1(RX_BUFFER_SIZE) | PAD1(LUT_PAD1) |
+ OPRND1(priv->devtype_data->rxfifo) | PAD1(LUT_PAD1) |
INSTR1(LUT_READ));
qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) |
PAD1(LUT_PAD1) | INSTR1(LUT_ADDR));
#endif
-#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
- defined(CONFIG_MX6ULL) || defined(CONFIG_MX7D)
- /*
- * To MX6SX, OPRND0(TX_BUFFER_SIZE) can not work correctly.
- * So, Use IDATSZ in IPCR to determine the size and here set 0.
- */
+ /* Use IDATSZ in IPCR to determine the size and here set 0. */
qspi_write32(priv->flags, ®s->lut[lut_base + 1], OPRND0(0) |
PAD0(LUT_PAD1) | INSTR0(LUT_WRITE));
-#else
- qspi_write32(priv->flags, ®s->lut[lut_base + 1],
- OPRND0(TX_BUFFER_SIZE) |
- PAD0(LUT_PAD1) | INSTR0(LUT_WRITE));
-#endif
qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0);
qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0);
qspi_write32(priv->flags, ®s->mcr,
QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
+ mcr_reg);
rx_addr = (void *)(uintptr_t)(priv->cur_amba_base + priv->sf_addr);
/* Read out the data directly from the AHB buffer. */
reg |= QSPI_MCR_DDR_EN_MASK;
/* Enable bit 29 for imx6sx */
reg |= BIT(29);
-
qspi_write32(priv->flags, ®s->mcr, reg);
+
+ /* Enable the TDH to 1 for some platforms like imx6ul, imx7d, etc
+ * These two bits are reserved on other platforms
+ */
+ reg = qspi_read32(priv->flags, ®s->flshcr);
+ reg &= ~(BIT(17));
+ reg |= BIT(16);
+ qspi_write32(priv->flags, ®s->flshcr, reg);
}
/*
qspi_write32(priv->flags, ®s->buf1cr, QSPI_BUFXCR_INVALID_MSTRID);
qspi_write32(priv->flags, ®s->buf2cr, QSPI_BUFXCR_INVALID_MSTRID);
qspi_write32(priv->flags, ®s->buf3cr, QSPI_BUF3CR_ALLMST_MASK |
- (0x80 << QSPI_BUF3CR_ADATSZ_SHIFT));
+ ((priv->devtype_data->ahb_buf_size >> 3) << QSPI_BUF3CR_ADATSZ_SHIFT));
/* We only use the buffer3 */
qspi_write32(priv->flags, ®s->buf0ind, 0);
mcr_reg = qspi_read32(priv->flags, ®s->mcr);
qspi_write32(priv->flags, ®s->mcr,
QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
+ mcr_reg);
qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
qspi_write32(priv->flags, ®s->sfar, priv->cur_amba_base);
reg = qspi_read32(priv->flags, ®s->rbsr);
if (reg & QSPI_RBSR_RDBFL_MASK) {
data = qspi_read32(priv->flags, ®s->rbdr[0]);
- data = qspi_endian_xchg(data);
+ data = qspi_endian_xchg(priv, data);
memcpy(rxbuf, &data, len);
qspi_write32(priv->flags, ®s->mcr,
qspi_read32(priv->flags, ®s->mcr) |
mcr_reg = qspi_read32(priv->flags, ®s->mcr);
qspi_write32(priv->flags, ®s->mcr,
QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
+ mcr_reg);
qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
qspi_write32(priv->flags, ®s->sfar, priv->cur_amba_base);
;
i = 0;
- while ((RX_BUFFER_SIZE >= len) && (len > 0)) {
+ while ((priv->devtype_data->rxfifo >= len) && (len > 0)) {
WATCHDOG_RESET();
rbsr_reg = qspi_read32(priv->flags, ®s->rbsr);
if (rbsr_reg & QSPI_RBSR_RDBFL_MASK) {
data = qspi_read32(priv->flags, ®s->rbdr[i]);
- data = qspi_endian_xchg(data);
+ data = qspi_endian_xchg(priv, data);
size = (len < 4) ? len : 4;
memcpy(rxbuf, &data, size);
len -= size;
mcr_reg = qspi_read32(priv->flags, ®s->mcr);
qspi_write32(priv->flags, ®s->mcr,
QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
+ mcr_reg);
qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
to_or_from = priv->sf_addr + priv->cur_amba_base;
qspi_write32(priv->flags, ®s->sfar, to_or_from);
- size = (len > RX_BUFFER_SIZE) ?
- RX_BUFFER_SIZE : len;
+ size = (len > priv->devtype_data->rxfifo) ?
+ priv->devtype_data->rxfifo : len;
qspi_write32(priv->flags, ®s->ipcr,
(seqid << QSPI_IPCR_SEQID_SHIFT) |
len -= size;
i = 0;
- while ((RX_BUFFER_SIZE >= size) && (size > 0)) {
+ while ((priv->devtype_data->rxfifo >= size) && (size > 0)) {
data = qspi_read32(priv->flags, ®s->rbdr[i]);
- data = qspi_endian_xchg(data);
+ data = qspi_endian_xchg(priv, data);
if (size < 4)
memcpy(rxbuf, &data, size);
else
mcr_reg = qspi_read32(priv->flags, ®s->mcr);
qspi_write32(priv->flags, ®s->mcr,
QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
+ mcr_reg);
qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
status_reg = 0;
reg = qspi_read32(priv->flags, ®s->rbsr);
if (reg & QSPI_RBSR_RDBFL_MASK) {
status_reg = qspi_read32(priv->flags, ®s->rbdr[0]);
- status_reg = qspi_endian_xchg(status_reg);
+ status_reg = qspi_endian_xchg(priv, status_reg);
}
qspi_write32(priv->flags, ®s->mcr,
qspi_read32(priv->flags, ®s->mcr) |
qspi_write32(priv->flags, ®s->sfar, to_or_from);
- tx_size = (len > TX_BUFFER_SIZE) ?
- TX_BUFFER_SIZE : len;
+ tx_size = (len > priv->devtype_data->txfifo) ?
+ priv->devtype_data->txfifo : len;
size = tx_size / 16;
/*
size++;
for (i = 0; i < size * 4; i++) {
memcpy(&data, txbuf, 4);
- data = qspi_endian_xchg(data);
+ data = qspi_endian_xchg(priv, data);
qspi_write32(priv->flags, ®s->tbdr, data);
txbuf += 4;
}
mcr_reg = qspi_read32(priv->flags, ®s->mcr);
qspi_write32(priv->flags, ®s->mcr,
QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
+ mcr_reg);
qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
qspi_write32(priv->flags, ®s->sfar, priv->cur_amba_base);
reg = qspi_read32(priv->flags, ®s->rbsr);
if (reg & QSPI_RBSR_RDBFL_MASK) {
data = qspi_read32(priv->flags, ®s->rbdr[0]);
- data = qspi_endian_xchg(data);
+ data = qspi_endian_xchg(priv, data);
memcpy(rxbuf, &data, len);
qspi_write32(priv->flags, ®s->mcr,
qspi_read32(priv->flags, ®s->mcr) |
mcr_reg = qspi_read32(priv->flags, ®s->mcr);
qspi_write32(priv->flags, ®s->mcr,
QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK |
- QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE);
+ mcr_reg);
qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS);
to_or_from = priv->sf_addr + priv->cur_amba_base;
static int fsl_qspi_child_pre_probe(struct udevice *dev)
{
struct spi_slave *slave = dev_get_parent_priv(dev);
+ struct fsl_qspi_priv *priv = dev_get_priv(dev_get_parent(dev));
- slave->max_write_size = TX_BUFFER_SIZE;
+ slave->max_write_size = priv->devtype_data->txfifo;
return 0;
}
static int fsl_qspi_probe(struct udevice *bus)
{
- u32 mcr_val;
u32 amba_size_per_chip;
struct fsl_qspi_platdata *plat = dev_get_platdata(bus);
struct fsl_qspi_priv *priv = dev_get_priv(bus);
priv->flash_num = plat->flash_num;
priv->num_chipselect = plat->num_chipselect;
+ priv->devtype_data = (struct fsl_qspi_devtype_data *)dev_get_driver_data(bus);
+ if (!priv->devtype_data) {
+ printf("ERROR : No devtype_data found\n");
+ return -ENODEV;
+ }
+
+ debug("devtype=%d, txfifo=%d, rxfifo=%d, ahb=%d, data=0x%x\n",
+ priv->devtype_data->devtype,
+ priv->devtype_data->txfifo,
+ priv->devtype_data->rxfifo,
+ priv->devtype_data->ahb_buf_size,
+ priv->devtype_data->driver_data);
+
/* make sure controller is not busy anywhere */
ret = is_controller_busy(priv);
return ret;
}
- mcr_val = qspi_read32(priv->flags, &priv->regs->mcr);
-
- /* Set endianness to LE for i.mx */
- if (IS_ENABLED(CONFIG_MX6) || IS_ENABLED(CONFIG_MX7))
- mcr_val = QSPI_MCR_END_CFD_LE;
-
qspi_write32(priv->flags, &priv->regs->mcr,
QSPI_MCR_RESERVED_MASK | QSPI_MCR_MDIS_MASK |
- (mcr_val & QSPI_MCR_END_CFD_MASK));
+ QSPI_MCR_END_CFD_LE);
qspi_cfg_smpr(priv, ~(QSPI_SMPR_FSDLY_MASK | QSPI_SMPR_DDRSMP_MASK |
QSPI_SMPR_FSPHS_MASK | QSPI_SMPR_HSENA_MASK), 0);
};
static const struct udevice_id fsl_qspi_ids[] = {
- { .compatible = "fsl,vf610-qspi" },
- { .compatible = "fsl,imx6sx-qspi" },
- { .compatible = "fsl,imx6ul-qspi" },
- { .compatible = "fsl,imx7d-qspi" },
+ { .compatible = "fsl,vf610-qspi", .data = (ulong)&vybrid_data },
+ { .compatible = "fsl,imx6sx-qspi", .data = (ulong)&imx6sx_data },
+ { .compatible = "fsl,imx6ul-qspi", .data = (ulong)&imx6ul_7d_data },
+ { .compatible = "fsl,imx7d-qspi", .data = (ulong)&imx6ul_7d_data },
+ { .compatible = "fsl,imx7ulp-qspi", .data = (ulong)&imx7ulp_data },
{ }
};
#else
#include <dm.h>
#include <errno.h>
+#include <dt-structs.h>
+
+#ifdef CONFIG_MX28
+#define dtd_fsl_imx_spi dtd_fsl_imx28_spi
+#else /* CONFIG_MX23 */
+#define dtd_fsl_imx_spi dtd_fsl_imx23_spi
+#endif
+
struct mxs_spi_platdata {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+ struct dtd_fsl_imx_spi dtplat;
+#endif
s32 frequency; /* Default clock frequency, -1 for none */
fdt_addr_t base; /* SPI IP block base address */
int num_cs; /* Number of CSes supported */
int ret;
debug("%s: probe\n", __func__);
+
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+ struct dtd_fsl_imx_spi *dtplat = &plat->dtplat;
+ struct phandle_1_arg *p1a = &dtplat->clocks[0];
+
+ priv->regs = (struct mxs_ssp_regs *)dtplat->reg[0];
+ priv->dma_channel = dtplat->dmas[1];
+ priv->clk_id = p1a->arg[0];
+ priv->max_freq = dtplat->spi_max_frequency;
+ plat->num_cs = dtplat->num_cs;
+
+ debug("OF_PLATDATA: regs: 0x%x max freq: %d clkid: %d\n",
+ (unsigned int)priv->regs, priv->max_freq, priv->clk_id);
+#else
priv->regs = (struct mxs_ssp_regs *)plat->base;
priv->max_freq = plat->frequency;
priv->dma_channel = plat->dma_id;
priv->clk_id = plat->clk_id;
+#endif
+
+ mxs_reset_block(&priv->regs->hw_ssp_ctrl0_reg);
ret = mxs_dma_init_channel(priv->dma_channel);
if (ret) {
return 0;
}
-#endif
static const struct udevice_id mxs_spi_ids[] = {
{ .compatible = "fsl,imx23-spi" },
{ .compatible = "fsl,imx28-spi" },
{ }
};
+#endif
U_BOOT_DRIVER(mxs_spi) = {
- .name = "mxs_spi",
+#ifdef CONFIG_MX28
+ .name = "fsl_imx28_spi",
+#else /* CONFIG_MX23 */
+ .name = "fsl_imx23_spi",
+#endif
.id = UCLASS_SPI,
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
.of_match = mxs_spi_ids,
.ofdata_to_platdata = mxs_ofdata_to_platdata,
#endif
- .priv_auto_alloc_size = sizeof(struct mxs_spi_platdata),
+ .platdata_auto_alloc_size = sizeof(struct mxs_spi_platdata),
.ops = &mxs_spi_ops,
.priv_auto_alloc_size = sizeof(struct mxs_spi_priv),
.probe = mxs_spi_probe,
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
func(MMC, mmc, 2) \
func(USB, usb, 0) \
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
- "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
- "setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
+ "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
"usb start ; " \
"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
"boot_file=zImage\0" \
#define CONFIG_BOARD_LATE_INIT
-/* Uncomment to enable secure boot support */
-/* #define CONFIG_SECURE_BOOT */
-#define CONFIG_CSF_SIZE 0x4000
-
/* Network */
#define CONFIG_FEC_MXC
#define CONFIG_FEC_XCV_TYPE RGMII
CONFIG_MFG_ENV_SETTINGS \
M4_BOOT_ENV \
MEM_LAYOUT_ENV_SETTINGS \
+ "boot_file=Image\0" \
"console=ttyLP3 earlycon\0" \
"fdt_addr=0x83000000\0" \
"fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
- "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
- "setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
+ "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \
"usb start ; " \
"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
"boot_file=zImage\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"kernel_addr_r=0x81000000\0" \
- "ramdisk_addr_r=0x82100000\0"
+ "ramdisk_addr_r=0x82100000\0" \
+ "scriptaddr=0x82500000\0"
#if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
#define SD_BOOTDEV 0
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
UBI_BOOTCMD
#elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
-#define CONFIG_BOOTCOMMAND "run emmcboot ; echo ; echo emmcboot failed ; " \
+#define CONFIG_BOOTCOMMAND \
"setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;"
#define MODULE_EXTRA_ENV_SETTINGS \
"variant=-emmc\0" \
* 0x1540000 - 0x1640000 : SPI.factory (1MiB)
*/
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SPI_FLASH_MTD
+/* SPI Flash Configs */
+#if defined(CONFIG_SPL_BUILD)
+#undef CONFIG_DM_SPI
+#undef CONFIG_DM_SPI_FLASH
+#undef CONFIG_SPI_FLASH_MTD
#endif
/* Below values are "dummy" - only to avoid build break */
#define CONFIG_MXC_UART_BASE UART5_BASE
/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1
-#define CONFIG_SYS_I2C_MXC_I2C2
-#define CONFIG_SYS_I2C_MXC_I2C3
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_I2C_EDID
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-
-/* Ethernet */
-#ifdef CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 0
-#endif
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* Watchdog */
+#if defined(CONFIG_SPL_BUILD)
+#undef CONFIG_WDT
+#undef CONFIG_WATCHDOG
+#define CONFIG_HW_WATCHDOG
+#endif
/* ENV config */
#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
#define __IMX6_SPL_CONFIG_H
#ifdef CONFIG_SPL
+
+#ifdef CONFIG_MX6_OCRAM_256KB
/*
- * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals:
+ * see Figure 8.4.1 in IMX6DQ Reference manuals:
+ * - IMX6DQ OCRAM (IRAM) is from 0x00907000 to 0x0093FFFF
+ * - BOOT ROM stack is at 0x0093FFB8
+ * - if icache/dcache is enabled (eFuse/strapping controlled) then the
+ * IMX BOOT ROM will setup MMU table at 0x00938000, therefore we need to
+ * fit between 0x00907000 and 0x00938000.
+ * - Additionally the BOOT ROM loads what they consider the firmware image
+ * which consists of a 4K header in front of us that contains the IVT, DCD
+ * and some padding thus 'our' max size is really 0x00908000 - 0x00938000
+ * or 192KB
+ */
+#define CONFIG_SPL_MAX_SIZE 0x30000
+#define CONFIG_SPL_STACK 0x0093FFB8
+/*
+ * Pad SPL to 196KB (4KB header + 192KB max size). This allows to write the
+ * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
+ * boot media (given that boot media specific offset is configured properly).
+ */
+#define CONFIG_SPL_PAD_TO 0x31000
+#else
+/*
+ * see Figure 8-3 in IMX6SDL Reference manuals:
* - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF
- * - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well
* - BOOT ROM stack is at 0x0091FFB8
* - if icache/dcache is enabled (eFuse/strapping controlled) then the
* IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to
*/
#define CONFIG_SPL_PAD_TO 0x11000
+#endif
+
/* MMC support */
#if defined(CONFIG_SPL_MMC_SUPPORT)
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef __IMX8MM_EVK_H
+#define __IMX8MM_EVK_H
+
+#include <linux/sizes.h>
+#include <asm/arch/imx-regs.h>
+
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_CSF_SIZE SZ_8K
+#endif
+
+#define CONFIG_SPL_MAX_SIZE (148 * 1024)
+#define CONFIG_SYS_MONITOR_LEN SZ_512K
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_UBOOT_BASE \
+ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_STACK 0x920000
+#define CONFIG_SPL_BSS_START_ADDR 0x910000
+#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */
+#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
+
+/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
+#define CONFIG_MALLOC_F_ADDR 0x930000
+/* For RAW image gives a error info not panic */
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
+#endif
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "image=Image.itb\0" \
+ "console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200\0" \
+ "fdt_addr=0x43000000\0" \
+ "fdt_high=0xffffffffffffffff\0" \
+ "boot_fit=try\0" \
+ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "initrd_addr=0x43800000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+ "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "mmcautodetect=yes\0" \
+ "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
+ "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
+ "bootm ${loadaddr}; " \
+ "else " \
+ "if run loadfdt; then " \
+ "booti ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi;\0" \
+ "netargs=setenv bootargs console=${console} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "run netargs; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${loadaddr} ${image}; " \
+ "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
+ "bootm ${loadaddr}; " \
+ "else " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "booti ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadimage; then " \
+ "run mmcboot; " \
+ "else run netboot; " \
+ "fi; " \
+ "fi; " \
+ "fi;"
+
+/* Link Definitions */
+#define CONFIG_LOADADDR 0x40480000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x200000
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_ENV_OVERWRITE
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_ENV_OFFSET (64 * SZ_64K)
+#endif
+#define CONFIG_ENV_SIZE SZ_4K
+#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC2 */
+#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN SZ_32M
+
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define PHYS_SDRAM 0x40000000
+#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
+
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1))
+
+#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_CBSIZE 2048
+#define CONFIG_SYS_MAXARGS 64
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* USDHC */
+#define CONFIG_FSL_USDHC
+
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+
+#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
+
+#define CONFIG_SYS_I2C_SPEED 100000
+
+#endif
#include <linux/sizes.h>
#include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CSF_SIZE 0x2000 /* 8K region */
-#endif
-
#define CONFIG_SPL_MAX_SIZE (124 * 1024)
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
"fdt_addr=0x83000000\0" \
"fdt_high=0xffffffffffffffff\0" \
"boot_fdt=try\0" \
- "fdt_file=fsl-imx8qxp-mek.dtb\0" \
+ "fdt_file=imx8qm-mek.dtb\0" \
"initrd_addr=0x83800000\0" \
"initrd_high=0xffffffffffffffff\0" \
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
#define CONFIG_SPL_MAX_SIZE (124 * 1024)
#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x250
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 0
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-/* environment organization */
-#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+/* Environment starts at 768k = 768 * 1024 = 786432 */
+#define CONFIG_ENV_OFFSET 786432
+/*
+ * Detect overlap between U-Boot image and environment area in build-time
+ *
+ * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.imx offset
+ * CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408
+ *
+ * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
+ * write the direct value here
+ */
+#define CONFIG_BOARD_SIZE_LIMIT 785408
#define CONFIG_ENV_SIZE (8 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV 0
/* MMC */
-/* Secure boot (HAB) support */
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CSF_SIZE 0x4000
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#endif
-#endif
#endif
#include "mx6_common.h"
-#ifdef CONFIG_SECURE_BOOT
-#ifndef CONFIG_CSF_SIZE
-#define CONFIG_CSF_SIZE 0x4000
-#endif
-#endif
-
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
"fdt_addr=0x83000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
+ "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
"videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
#define CONFIG_IMX_THERMAL
#ifndef CONFIG_SPL_BUILD
-#ifdef CONFIG_VIDEO
+#if defined(CONFIG_DM_VIDEO)
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
#define CONFIG_SPLASH_SCREEN
#include "mx6_common.h"
#include <asm/mach-imx/gpio.h>
-#ifdef CONFIG_SECURE_BOOT
-#ifndef CONFIG_CSF_SIZE
-#define CONFIG_CSF_SIZE 0x4000
-#endif
-#endif
-
#define PHYS_SDRAM_SIZE SZ_512M
/* Size of malloc() pool */
"console=ttymxc0\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
- "fdt_file=imx6ull-14x14-evk.dtb\0" \
+ "fdt_file=undefined\0" \
"fdt_addr=0x83000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
"else " \
"bootz; " \
"fi;\0" \
+ "findfdt="\
+ "if test $fdt_file = undefined; then " \
+ "if test $board_name = ULZ-EVK && test $board_rev = 14X14; then " \
+ "setenv fdt_file imx6ulz-14x14-evk.dtb; fi; " \
+ "if test $board_name = EVK && test $board_rev = 14X14; then " \
+ "setenv fdt_file imx6ull-14x14-evk.dtb; fi; " \
+ "if test $fdt_file = undefined; then " \
+ "echo WARNING: Could not determine dtb to use; " \
+ "fi; " \
+ "fi;\0" \
"netargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/nfs " \
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
"fi;\0" \
#define CONFIG_BOOTCOMMAND \
+ "run findfdt;" \
"mmc dev ${mmcdev};" \
"mmc dev ${mmcdev}; if mmc rescan; then " \
"if run loadbootscript; then " \
#define CONFIG_ARMV7_PSCI_1_0
-/* Secure boot (HAB) support */
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CSF_SIZE 0x4000
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#endif
-#endif
/*
* If we have defined the OPTEE ram size and not OPTEE it means that we were
#include <linux/sizes.h>
#include <asm/arch/imx-regs.h>
-/*Uncomment it to use secure boot*/
-/*#define CONFIG_SECURE_BOOT*/
-
-#ifdef CONFIG_SECURE_BOOT
-#ifndef CONFIG_CSF_SIZE
-#define CONFIG_CSF_SIZE 0x4000
-#endif
-#endif
-
#define CONFIG_BOARD_POSTCLK_INIT
#define CONFIG_SYS_BOOTM_LEN 0x1000000
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the pico-imx6 board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "mx6_common.h"
+
+#include "imx6_spl.h"
+
+#ifdef CONFIG_SPL_OS_BOOT
+/* Falcon Mode */
+#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
+#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
+
+/* Falcon Mode - MMC support: args@1MB kernel@2MB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
+#endif
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M) /* Increase due to DFU */
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
+
+#define CONFIG_SYS_MEMTEST_START 0x10000000
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
+
+/* MMC Configuration */
+#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR
+#define CONFIG_SUPPORT_EMMC_BOOT
+#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
+
+/* USB Configs */
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
+#define DFU_DEFAULT_POLL_TIMEOUT 300
+
+#define CONFIG_DFU_ENV_SETTINGS \
+ "dfu_alt_info=" \
+ "spl raw 0x2 0x400;" \
+ "u-boot raw 0x8a 0x1000;" \
+ "/boot/zImage ext4 0 1;" \
+ "rootfs part 0 1\0" \
+
+#define BOOTMENU_ENV \
+ "bootmenu_0=Boot using PICO-Hobbit baseboard=" \
+ "setenv baseboard hobbit; saveenv; run base_boot\0" \
+ "bootmenu_1=Boot using PICO-Pi baseboard=" \
+ "setenv baseboard pi; saveenv; run base_boot\0" \
+ "bootmenu_2=Boot using PICO-Dwarf baseboard=" \
+ "setenv baseboard dwarf; saveenv; run base_boot\0" \
+ "bootmenu_3=Boot using PICO-Nymph baseboard=" \
+ "setenv baseboard nymph; saveenv; run base_boot\0" \
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=ttymxc0\0" \
+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ BOOTMENU_ENV \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "fdt_addr_r=0x18000000\0" \
+ "fdt_addr=0x18000000\0" \
+ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+ CONFIG_DFU_ENV_SETTINGS \
+ "finduuid=part uuid mmc 0:1 uuid\0" \
+ "findfdt="\
+ "if test $baseboard = hobbit && test $board_rev = MX6Q ; then " \
+ "setenv fdtfile imx6q-pico-hobbit.dtb; fi; " \
+ "if test $baseboard = pi && test $board_rev = MX6Q ; then " \
+ "setenv fdtfile imx6q-pico-pi.dtb; fi; " \
+ "if test $baseboard = dwarf && test $board_rev = MX6Q ; then " \
+ "setenv fdtfile imx6q-pico-dwarf.dtb; fi; " \
+ "if test $baseboard = nymph && test $board_rev = MX6Q ; then " \
+ "setenv fdtfile imx6q-pico-nymph.dtb; fi; " \
+ "if test $baseboard = hobbit && test $board_rev = MX6DL ; then " \
+ "setenv fdtfile imx6dl-pico-hobbit.dtb; fi; " \
+ "if test $baseboard = pi && test $board_rev = MX6DL ; then " \
+ "setenv fdtfile imx6dl-pico-pi.dtb; fi; " \
+ "if test $baseboard = dwarf && test $board_rev = MX6DL ; then " \
+ "setenv fdtfile imx6dl-pico-dwarf.dtb; fi; " \
+ "if test $baseboard = nymph && test $board_rev = MX6DL ; then " \
+ "setenv fdtfile imx6dl-pico-nymph.dtb; fi; " \
+ "if test $fdtfile = ask; then " \
+ "echo WARNING: Could not determine dtb to use; fi; \0" \
+ "default_boot=" \
+ "if test $baseboard = ask ; then " \
+ "bootmenu -1; " \
+ "else " \
+ "run base_boot;" \
+ "fi; \0" \
+ "base_boot=run findfdt; run finduuid; run distro_bootcmd\0" \
+ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+ "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+ "ramdisk_addr_r=0x13000000\0" \
+ "ramdiskaddr=0x13000000\0" \
+ "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+ BOOTENV
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0)
+
+#include <config_distro_bootcmd.h>
+
+/* Physical Memory Map */
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* Environment organization */
+#define CONFIG_ENV_SIZE (8 * 1024)
+
+/* Environment starts at 768k = 768 * 1024 = 786432 */
+#define CONFIG_ENV_OFFSET 786432
+/*
+ * Detect overlap between U-Boot image and environment area in build-time
+ *
+ * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.img offset
+ * CONFIG_BOARD_SIZE_LIMIT = 768k - 69k = 699k = 715776
+ *
+ * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
+ * write the direct value here
+ */
+#define CONFIG_BOARD_SIZE_LIMIT 715776
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+/* Ethernet Configuration */
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_ETHPRIME "FEC"
+#define CONFIG_FEC_MXC_PHYADDR 1
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+
+/* Framebuffer */
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
+
+#endif /* __CONFIG_H * */
"rootfs part 0 1\0" \
#define BOOTMENU_ENV \
- "bootmenu_0=Boot using PICO-Hobbit baseboard=" \
+ "bootmenu_0=Boot using PICO-Dwarf baseboard=" \
+ "setenv fdtfile imx6ul-pico-dwarf.dtb\0" \
+ "bootmenu_1=Boot using PICO-Hobbit baseboard=" \
"setenv fdtfile imx6ul-pico-hobbit.dtb\0" \
- "bootmenu_1=Boot using PICO-Pi baseboard=" \
+ "bootmenu_2=Boot using PICO-Pi baseboard=" \
"setenv fdtfile imx6ul-pico-pi.dtb\0" \
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
+ "splashpos=m,m\0" \
"console=ttymxc5\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "videomode=video=ctfb:x:800,y:480,depth:24,mode:0,pclk:30000,le:46,ri:210,up:22,lo:23,hs:20,vs:10,sync:0,vmode:0\0" \
BOOTMENU_ENV \
"fdt_addr=0x83000000\0" \
"fdt_addr_r=0x83000000\0" \
/* environment organization */
#define CONFIG_ENV_SIZE SZ_8K
-#define CONFIG_ENV_OFFSET (8 * SZ_64K)
+/* Environment starts at 768k = 768 * 1024 = 786432 */
+#define CONFIG_ENV_OFFSET 786432
+/*
+ * Detect overlap between U-Boot image and environment area in build-time
+ *
+ * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.img offset
+ * CONFIG_BOARD_SIZE_LIMIT = 768k - 69k = 699k = 715776
+ *
+ * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
+ * write the direct value here
+ */
+#define CONFIG_BOARD_SIZE_LIMIT 715776
+
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 0
+#ifdef CONFIG_VIDEO
+#define CONFIG_VIDEO_MXS
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_LOGO
+#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
+#endif
+
#endif /* __PICO_IMX6UL_CONFIG_H */
#define PICO_BOOT_ENV \
"bootmenu_0=Boot using PICO-Hobbit baseboard=" \
"setenv fdtfile imx7d-pico-hobbit.dtb\0" \
- "bootmenu_1=Boot using PICO-Pi baseboard=" \
+ "bootmenu_1=Boot using PICO-Dwarf baseboard=" \
+ "setenv fdtfile imx7d-pico-dwarf.dtb\0" \
+ "bootmenu_2=Boot using PICO-Nymph baseboard=" \
+ "setenv fdtfile imx7d-pico-nymph.dtb\0" \
+ "bootmenu_3=Boot using PICO-Pi baseboard=" \
"setenv fdtfile imx7d-pico-pi.dtb\0" \
BOOTENV
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"image=zImage\0" \
"splashpos=m,m\0" \
+ "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
"console=ttymxc4\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
#define CONFIG_POWER_PFUZE3000
#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
-#ifdef CONFIG_VIDEO
+#ifdef CONFIG_DM_VIDEO
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
#define CONFIG_SPLASH_SCREEN
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-/* Ethernet Configuration */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 1
-#define CONFIG_PHY_ATHEROS
-
/* Framebuffer */
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Copyright (C) 2015-2016 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
*/
#ifndef __DT_BINDINGS_CLOCK_IMX6UL_H
#define IMX6UL_CLK_LDB_DI1_DIV_SEL 92
#define IMX6UL_CLK_ARM 93
#define IMX6UL_CLK_PERIPH_CLK2 94
-#define IMX6UL_CLK_PERIPH2_CLK2 95
+#define IMX6UL_CLK_PERIPH2_CLK2 95
#define IMX6UL_CLK_AHB 96
#define IMX6UL_CLK_MMDC_PODF 97
#define IMX6UL_CLK_AXI_PODF 98
#define IMX6UL_CLK_CSI_PODF 222
#define IMX6UL_CLK_PLL3_120M 223
#define IMX6UL_CLK_KPP 224
-/* For i.MX6ULL */
-#define IMX6UL_CLK_ESAI_SEL 224
-#define IMX6UL_CLK_ESAI_PRED 225
-#define IMX6UL_CLK_ESAI_PODF 226
-#define IMX6UL_CLK_ESAI_EXTAL 227
-#define IMX6UL_CLK_ESAI_MEM 228
-#define IMX6UL_CLK_ESAI_IPG 229
-#define IMX6UL_CLK_DCP_CLK 230
-#define IMX6UL_CLK_EPDC_PRE_SEL 231
-#define IMX6UL_CLK_EPDC_SEL 232
-#define IMX6UL_CLK_EPDC_PODF 233
-#define IMX6UL_CLK_EPDC_ACLK 234
-#define IMX6UL_CLK_EPDC_PIX 235
+#define IMX6ULL_CLK_ESAI_PRED 225
+#define IMX6ULL_CLK_ESAI_PODF 226
+#define IMX6ULL_CLK_ESAI_EXTAL 227
+#define IMX6ULL_CLK_ESAI_MEM 228
+#define IMX6ULL_CLK_ESAI_IPG 229
+#define IMX6ULL_CLK_DCP_CLK 230
+#define IMX6ULL_CLK_EPDC_PRE_SEL 231
+#define IMX6ULL_CLK_EPDC_SEL 232
+#define IMX6ULL_CLK_EPDC_PODF 233
+#define IMX6ULL_CLK_EPDC_ACLK 234
+#define IMX6ULL_CLK_EPDC_PIX 235
+#define IMX6ULL_CLK_ESAI_SEL 236
+#define IMX6UL_CLK_CKO1_SEL 237
+#define IMX6UL_CLK_CKO1_PODF 238
+#define IMX6UL_CLK_CKO1 239
+#define IMX6UL_CLK_CKO2_SEL 240
+#define IMX6UL_CLK_CKO2_PODF 241
+#define IMX6UL_CLK_CKO2 242
+#define IMX6UL_CLK_CKO 243
+#define IMX6UL_CLK_GPIO1 244
+#define IMX6UL_CLK_GPIO2 245
+#define IMX6UL_CLK_GPIO3 246
+#define IMX6UL_CLK_GPIO4 247
+#define IMX6UL_CLK_GPIO5 248
+#define IMX6UL_CLK_MMDC_P1_IPG 249
-#define IMX6UL_CLK_END 236
+#define IMX6UL_CLK_END 250
#endif /* __DT_BINDINGS_CLOCK_IMX6UL_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2017-2018 NXP
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX8MM_H
+#define __DT_BINDINGS_CLOCK_IMX8MM_H
+
+#define IMX8MM_CLK_DUMMY 0
+#define IMX8MM_CLK_32K 1
+#define IMX8MM_CLK_24M 2
+#define IMX8MM_OSC_HDMI_CLK 3
+#define IMX8MM_CLK_EXT1 4
+#define IMX8MM_CLK_EXT2 5
+#define IMX8MM_CLK_EXT3 6
+#define IMX8MM_CLK_EXT4 7
+#define IMX8MM_AUDIO_PLL1_REF_SEL 8
+#define IMX8MM_AUDIO_PLL2_REF_SEL 9
+#define IMX8MM_VIDEO_PLL1_REF_SEL 10
+#define IMX8MM_DRAM_PLL_REF_SEL 11
+#define IMX8MM_GPU_PLL_REF_SEL 12
+#define IMX8MM_VPU_PLL_REF_SEL 13
+#define IMX8MM_ARM_PLL_REF_SEL 14
+#define IMX8MM_SYS_PLL1_REF_SEL 15
+#define IMX8MM_SYS_PLL2_REF_SEL 16
+#define IMX8MM_SYS_PLL3_REF_SEL 17
+#define IMX8MM_AUDIO_PLL1 18
+#define IMX8MM_AUDIO_PLL2 19
+#define IMX8MM_VIDEO_PLL1 20
+#define IMX8MM_DRAM_PLL 21
+#define IMX8MM_GPU_PLL 22
+#define IMX8MM_VPU_PLL 23
+#define IMX8MM_ARM_PLL 24
+#define IMX8MM_SYS_PLL1 25
+#define IMX8MM_SYS_PLL2 26
+#define IMX8MM_SYS_PLL3 27
+#define IMX8MM_AUDIO_PLL1_BYPASS 28
+#define IMX8MM_AUDIO_PLL2_BYPASS 29
+#define IMX8MM_VIDEO_PLL1_BYPASS 30
+#define IMX8MM_DRAM_PLL_BYPASS 31
+#define IMX8MM_GPU_PLL_BYPASS 32
+#define IMX8MM_VPU_PLL_BYPASS 33
+#define IMX8MM_ARM_PLL_BYPASS 34
+#define IMX8MM_SYS_PLL1_BYPASS 35
+#define IMX8MM_SYS_PLL2_BYPASS 36
+#define IMX8MM_SYS_PLL3_BYPASS 37
+#define IMX8MM_AUDIO_PLL1_OUT 38
+#define IMX8MM_AUDIO_PLL2_OUT 39
+#define IMX8MM_VIDEO_PLL1_OUT 40
+#define IMX8MM_DRAM_PLL_OUT 41
+#define IMX8MM_GPU_PLL_OUT 42
+#define IMX8MM_VPU_PLL_OUT 43
+#define IMX8MM_ARM_PLL_OUT 44
+#define IMX8MM_SYS_PLL1_OUT 45
+#define IMX8MM_SYS_PLL2_OUT 46
+#define IMX8MM_SYS_PLL3_OUT 47
+#define IMX8MM_SYS_PLL1_40M 48
+#define IMX8MM_SYS_PLL1_80M 49
+#define IMX8MM_SYS_PLL1_100M 50
+#define IMX8MM_SYS_PLL1_133M 51
+#define IMX8MM_SYS_PLL1_160M 52
+#define IMX8MM_SYS_PLL1_200M 53
+#define IMX8MM_SYS_PLL1_266M 54
+#define IMX8MM_SYS_PLL1_400M 55
+#define IMX8MM_SYS_PLL1_800M 56
+#define IMX8MM_SYS_PLL2_50M 57
+#define IMX8MM_SYS_PLL2_100M 58
+#define IMX8MM_SYS_PLL2_125M 59
+#define IMX8MM_SYS_PLL2_166M 60
+#define IMX8MM_SYS_PLL2_200M 61
+#define IMX8MM_SYS_PLL2_250M 62
+#define IMX8MM_SYS_PLL2_333M 63
+#define IMX8MM_SYS_PLL2_500M 64
+#define IMX8MM_SYS_PLL2_1000M 65
+
+/* core */
+#define IMX8MM_CLK_A53_SRC 66
+#define IMX8MM_CLK_M4_SRC 67
+#define IMX8MM_CLK_VPU_SRC 68
+#define IMX8MM_CLK_GPU3D_SRC 69
+#define IMX8MM_CLK_GPU2D_SRC 70
+#define IMX8MM_CLK_A53_CG 71
+#define IMX8MM_CLK_M4_CG 72
+#define IMX8MM_CLK_VPU_CG 73
+#define IMX8MM_CLK_GPU3D_CG 74
+#define IMX8MM_CLK_GPU2D_CG 75
+#define IMX8MM_CLK_A53_DIV 76
+#define IMX8MM_CLK_M4_DIV 77
+#define IMX8MM_CLK_VPU_DIV 78
+#define IMX8MM_CLK_GPU3D_DIV 79
+#define IMX8MM_CLK_GPU2D_DIV 80
+
+/* bus */
+#define IMX8MM_CLK_MAIN_AXI 81
+#define IMX8MM_CLK_ENET_AXI 82
+#define IMX8MM_CLK_NAND_USDHC_BUS 83
+#define IMX8MM_CLK_VPU_BUS 84
+#define IMX8MM_CLK_DISP_AXI 85
+#define IMX8MM_CLK_DISP_APB 86
+#define IMX8MM_CLK_DISP_RTRM 87
+#define IMX8MM_CLK_USB_BUS 88
+#define IMX8MM_CLK_GPU_AXI 89
+#define IMX8MM_CLK_GPU_AHB 90
+#define IMX8MM_CLK_NOC 91
+#define IMX8MM_CLK_NOC_APB 92
+
+#define IMX8MM_CLK_AHB 93
+#define IMX8MM_CLK_AUDIO_AHB 94
+#define IMX8MM_CLK_IPG_ROOT 95
+#define IMX8MM_CLK_IPG_AUDIO_ROOT 96
+
+#define IMX8MM_CLK_DRAM_ALT 97
+#define IMX8MM_CLK_DRAM_APB 98
+#define IMX8MM_CLK_VPU_G1 99
+#define IMX8MM_CLK_VPU_G2 100
+#define IMX8MM_CLK_DISP_DTRC 101
+#define IMX8MM_CLK_DISP_DC8000 102
+#define IMX8MM_CLK_PCIE1_CTRL 103
+#define IMX8MM_CLK_PCIE1_PHY 104
+#define IMX8MM_CLK_PCIE1_AUX 105
+#define IMX8MM_CLK_DC_PIXEL 106
+#define IMX8MM_CLK_LCDIF_PIXEL 107
+#define IMX8MM_CLK_SAI1 108
+#define IMX8MM_CLK_SAI2 109
+#define IMX8MM_CLK_SAI3 110
+#define IMX8MM_CLK_SAI4 111
+#define IMX8MM_CLK_SAI5 112
+#define IMX8MM_CLK_SAI6 113
+#define IMX8MM_CLK_SPDIF1 114
+#define IMX8MM_CLK_SPDIF2 115
+#define IMX8MM_CLK_ENET_REF 116
+#define IMX8MM_CLK_ENET_TIMER 117
+#define IMX8MM_CLK_ENET_PHY_REF 118
+#define IMX8MM_CLK_NAND 119
+#define IMX8MM_CLK_QSPI 120
+#define IMX8MM_CLK_USDHC1 121
+#define IMX8MM_CLK_USDHC2 122
+#define IMX8MM_CLK_I2C1 123
+#define IMX8MM_CLK_I2C2 124
+#define IMX8MM_CLK_I2C3 125
+#define IMX8MM_CLK_I2C4 126
+#define IMX8MM_CLK_UART1 127
+#define IMX8MM_CLK_UART2 128
+#define IMX8MM_CLK_UART3 129
+#define IMX8MM_CLK_UART4 130
+#define IMX8MM_CLK_USB_CORE_REF 131
+#define IMX8MM_CLK_USB_PHY_REF 132
+#define IMX8MM_CLK_ECSPI1 133
+#define IMX8MM_CLK_ECSPI2 134
+#define IMX8MM_CLK_PWM1 135
+#define IMX8MM_CLK_PWM2 136
+#define IMX8MM_CLK_PWM3 137
+#define IMX8MM_CLK_PWM4 138
+#define IMX8MM_CLK_GPT1 139
+#define IMX8MM_CLK_WDOG 140
+#define IMX8MM_CLK_WRCLK 141
+#define IMX8MM_CLK_DSI_CORE 142
+#define IMX8MM_CLK_DSI_PHY_REF 143
+#define IMX8MM_CLK_DSI_DBI 144
+#define IMX8MM_CLK_USDHC3 145
+#define IMX8MM_CLK_CSI1_CORE 146
+#define IMX8MM_CLK_CSI1_PHY_REF 147
+#define IMX8MM_CLK_CSI1_ESC 148
+#define IMX8MM_CLK_CSI2_CORE 149
+#define IMX8MM_CLK_CSI2_PHY_REF 150
+#define IMX8MM_CLK_CSI2_ESC 151
+#define IMX8MM_CLK_PCIE2_CTRL 152
+#define IMX8MM_CLK_PCIE2_PHY 153
+#define IMX8MM_CLK_PCIE2_AUX 154
+#define IMX8MM_CLK_ECSPI3 155
+#define IMX8MM_CLK_PDM 156
+#define IMX8MM_CLK_VPU_H1 157
+#define IMX8MM_CLK_CLKO1 158
+
+#define IMX8MM_CLK_ECSPI1_ROOT 159
+#define IMX8MM_CLK_ECSPI2_ROOT 160
+#define IMX8MM_CLK_ECSPI3_ROOT 161
+#define IMX8MM_CLK_ENET1_ROOT 162
+#define IMX8MM_CLK_GPT1_ROOT 163
+#define IMX8MM_CLK_I2C1_ROOT 164
+#define IMX8MM_CLK_I2C2_ROOT 165
+#define IMX8MM_CLK_I2C3_ROOT 166
+#define IMX8MM_CLK_I2C4_ROOT 167
+#define IMX8MM_CLK_OCOTP_ROOT 168
+#define IMX8MM_CLK_PCIE1_ROOT 169
+#define IMX8MM_CLK_PWM1_ROOT 170
+#define IMX8MM_CLK_PWM2_ROOT 171
+#define IMX8MM_CLK_PWM3_ROOT 172
+#define IMX8MM_CLK_PWM4_ROOT 173
+#define IMX8MM_CLK_QSPI_ROOT 174
+#define IMX8MM_CLK_NAND_ROOT 175
+#define IMX8MM_CLK_SAI1_ROOT 176
+#define IMX8MM_CLK_SAI1_IPG 177
+#define IMX8MM_CLK_SAI2_ROOT 178
+#define IMX8MM_CLK_SAI2_IPG 179
+#define IMX8MM_CLK_SAI3_ROOT 180
+#define IMX8MM_CLK_SAI3_IPG 181
+#define IMX8MM_CLK_SAI4_ROOT 182
+#define IMX8MM_CLK_SAI4_IPG 183
+#define IMX8MM_CLK_SAI5_ROOT 184
+#define IMX8MM_CLK_SAI5_IPG 185
+#define IMX8MM_CLK_SAI6_ROOT 186
+#define IMX8MM_CLK_SAI6_IPG 187
+#define IMX8MM_CLK_UART1_ROOT 188
+#define IMX8MM_CLK_UART2_ROOT 189
+#define IMX8MM_CLK_UART3_ROOT 190
+#define IMX8MM_CLK_UART4_ROOT 191
+#define IMX8MM_CLK_USB1_CTRL_ROOT 192
+#define IMX8MM_CLK_GPU3D_ROOT 193
+#define IMX8MM_CLK_USDHC1_ROOT 194
+#define IMX8MM_CLK_USDHC2_ROOT 195
+#define IMX8MM_CLK_WDOG1_ROOT 196
+#define IMX8MM_CLK_WDOG2_ROOT 197
+#define IMX8MM_CLK_WDOG3_ROOT 198
+#define IMX8MM_CLK_VPU_G1_ROOT 199
+#define IMX8MM_CLK_GPU_BUS_ROOT 200
+#define IMX8MM_CLK_VPU_H1_ROOT 201
+#define IMX8MM_CLK_VPU_G2_ROOT 202
+#define IMX8MM_CLK_PDM_ROOT 203
+#define IMX8MM_CLK_DISP_ROOT 204
+#define IMX8MM_CLK_DISP_AXI_ROOT 205
+#define IMX8MM_CLK_DISP_APB_ROOT 206
+#define IMX8MM_CLK_DISP_RTRM_ROOT 207
+#define IMX8MM_CLK_USDHC3_ROOT 208
+#define IMX8MM_CLK_TMU_ROOT 209
+#define IMX8MM_CLK_VPU_DEC_ROOT 210
+#define IMX8MM_CLK_SDMA1_ROOT 211
+#define IMX8MM_CLK_SDMA2_ROOT 212
+#define IMX8MM_CLK_SDMA3_ROOT 213
+#define IMX8MM_CLK_GPT_3M 214
+#define IMX8MM_CLK_ARM 215
+#define IMX8MM_CLK_PDM_IPG 216
+#define IMX8MM_CLK_GPU2D_ROOT 217
+#define IMX8MM_CLK_MU_ROOT 218
+#define IMX8MM_CLK_CSI1_ROOT 219
+
+#define IMX8MM_CLK_DRAM_CORE 220
+#define IMX8MM_CLK_DRAM_ALT_ROOT 221
+
+#define IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK 222
+
+#define IMX8MM_CLK_GPIO1_ROOT 223
+#define IMX8MM_CLK_GPIO2_ROOT 224
+#define IMX8MM_CLK_GPIO3_ROOT 225
+#define IMX8MM_CLK_GPIO4_ROOT 226
+#define IMX8MM_CLK_GPIO5_ROOT 227
+
+#define IMX8MM_CLK_SNVS_ROOT 228
+#define IMX8MM_CLK_GIC 229
+
+#define IMX8MM_CLK_END 230
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Copyright (C) 2018 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+#ifndef __DT_BINDINGS_IMX8MQ_POWER_H__
+#define __DT_BINDINGS_IMX8MQ_POWER_H__
+
+#define IMX8M_POWER_DOMAIN_MIPI 0
+#define IMX8M_POWER_DOMAIN_PCIE1 1
+#define IMX8M_POWER_DOMAIN_USB_OTG1 2
+#define IMX8M_POWER_DOMAIN_USB_OTG2 3
+#define IMX8M_POWER_DOMAIN_DDR1 4
+#define IMX8M_POWER_DOMAIN_GPU 5
+#define IMX8M_POWER_DOMAIN_VPU 6
+#define IMX8M_POWER_DOMAIN_DISP 7
+#define IMX8M_POWER_DOMAIN_MIPI_CSI1 8
+#define IMX8M_POWER_DOMAIN_MIPI_CSI2 9
+#define IMX8M_POWER_DOMAIN_PCIE2 10
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2017 Impinj, Inc.
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ */
+
+#ifndef DT_BINDING_RESET_IMX7_H
+#define DT_BINDING_RESET_IMX7_H
+
+#define IMX7_RESET_A7_CORE_POR_RESET0 0
+#define IMX7_RESET_A7_CORE_POR_RESET1 1
+#define IMX7_RESET_A7_CORE_RESET0 2
+#define IMX7_RESET_A7_CORE_RESET1 3
+#define IMX7_RESET_A7_DBG_RESET0 4
+#define IMX7_RESET_A7_DBG_RESET1 5
+#define IMX7_RESET_A7_ETM_RESET0 6
+#define IMX7_RESET_A7_ETM_RESET1 7
+#define IMX7_RESET_A7_SOC_DBG_RESET 8
+#define IMX7_RESET_A7_L2RESET 9
+#define IMX7_RESET_SW_M4C_RST 10
+#define IMX7_RESET_SW_M4P_RST 11
+#define IMX7_RESET_EIM_RST 12
+#define IMX7_RESET_HSICPHY_PORT_RST 13
+#define IMX7_RESET_USBPHY1_POR 14
+#define IMX7_RESET_USBPHY1_PORT_RST 15
+#define IMX7_RESET_USBPHY2_POR 16
+#define IMX7_RESET_USBPHY2_PORT_RST 17
+#define IMX7_RESET_MIPI_PHY_MRST 18
+#define IMX7_RESET_MIPI_PHY_SRST 19
+
+/*
+ * IMX7_RESET_PCIEPHY is a logical reset line combining PCIEPHY_BTN
+ * and PCIEPHY_G_RST
+ */
+#define IMX7_RESET_PCIEPHY 20
+#define IMX7_RESET_PCIEPHY_PERST 21
+
+/*
+ * IMX7_RESET_PCIE_CTRL_APPS_EN is not strictly a reset line, but it
+ * can be used to inhibit PCIe LTTSM, so, in a way, it can be thoguht
+ * of as one
+ */
+#define IMX7_RESET_PCIE_CTRL_APPS_EN 22
+#define IMX7_RESET_DDRC_PRST 23
+#define IMX7_RESET_DDRC_CORE_RST 24
+
+#define IMX7_RESET_PCIE_CTRL_APPS_TURNOFF 25
+
+#define IMX7_RESET_NUM 26
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ */
+
+#ifndef DT_BINDING_RESET_IMX8MQ_H
+#define DT_BINDING_RESET_IMX8MQ_H
+
+#define IMX8MQ_RESET_A53_CORE_POR_RESET0 0
+#define IMX8MQ_RESET_A53_CORE_POR_RESET1 1
+#define IMX8MQ_RESET_A53_CORE_POR_RESET2 2
+#define IMX8MQ_RESET_A53_CORE_POR_RESET3 3
+#define IMX8MQ_RESET_A53_CORE_RESET0 4
+#define IMX8MQ_RESET_A53_CORE_RESET1 5
+#define IMX8MQ_RESET_A53_CORE_RESET2 6
+#define IMX8MQ_RESET_A53_CORE_RESET3 7
+#define IMX8MQ_RESET_A53_DBG_RESET0 8
+#define IMX8MQ_RESET_A53_DBG_RESET1 9
+#define IMX8MQ_RESET_A53_DBG_RESET2 10
+#define IMX8MQ_RESET_A53_DBG_RESET3 11
+#define IMX8MQ_RESET_A53_ETM_RESET0 12
+#define IMX8MQ_RESET_A53_ETM_RESET1 13
+#define IMX8MQ_RESET_A53_ETM_RESET2 14
+#define IMX8MQ_RESET_A53_ETM_RESET3 15
+#define IMX8MQ_RESET_A53_SOC_DBG_RESET 16
+#define IMX8MQ_RESET_A53_L2RESET 17
+#define IMX8MQ_RESET_SW_NON_SCLR_M4C_RST 18
+#define IMX8MQ_RESET_OTG1_PHY_RESET 19
+#define IMX8MQ_RESET_OTG2_PHY_RESET 20
+#define IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N 21
+#define IMX8MQ_RESET_MIPI_DSI_RESET_N 22
+#define IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N 23
+#define IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N 24
+#define IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N 25
+#define IMX8MQ_RESET_PCIEPHY 26
+#define IMX8MQ_RESET_PCIEPHY_PERST 27
+#define IMX8MQ_RESET_PCIE_CTRL_APPS_EN 28
+#define IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF 29
+#define IMX8MQ_RESET_HDMI_PHY_APB_RESET 30 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_DISP_RESET 31
+#define IMX8MQ_RESET_GPU_RESET 32
+#define IMX8MQ_RESET_VPU_RESET 33
+#define IMX8MQ_RESET_PCIEPHY2 34 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_PCIEPHY2_PERST 35 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_PCIE2_CTRL_APPS_EN 36 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF 37 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI1_CORE_RESET 38 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET 39 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI1_ESC_RESET 40 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI2_CORE_RESET 41 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET 42 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI2_ESC_RESET 43 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_DDRC1_PRST 44
+#define IMX8MQ_RESET_DDRC1_CORE_RESET 45
+#define IMX8MQ_RESET_DDRC1_PHY_RESET 46
+#define IMX8MQ_RESET_DDRC2_PRST 47 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_DDRC2_CORE_RESET 48 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_DDRC2_PHY_RESET 49 /* i.MX8MM does NOT support */
+
+#define IMX8MQ_RESET_NUM 50
+
+#endif
#ifndef _IMX_SIP_H__
#define _IMX_SIP_H_
+#define IMX_SIP_GPC 0xC2000000
+#define IMX_SIP_GPC_PM_DOMAIN 0x03
+
#define IMX_SIP_SRC 0xC2000005
#define IMX_SIP_SRC_M4_START 0x00
#define IMX_SIP_SRC_M4_STARTED 0x01
#define SPL_COPY_PAYLOAD_ONLY 1
#define SPL_FIT_FOUND 2
+/**
+ * spl_load_imx_container() - Loads a imx container image from a device.
+ * @spl_image: Image description to set up
+ * @info: Structure containing the information required to load data.
+ * @sector: Sector number where container image is located in the device
+ *
+ * Reads the container image @sector in the device. Loads u-boot image to
+ * specified load address.
+ */
+int spl_load_imx_container(struct spl_image_info *spl_image,
+ struct spl_load_info *info, ulong sector);
+
/* SPL common functions */
void preloader_console_init(void);
u32 spl_boot_device(void);
* stage wants to return to the ROM code to continue booting, boards
* can implement 'board_return_to_bootrom'.
*/
-void board_return_to_bootrom(void);
+int board_return_to_bootrom(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev);
/**
* board_spl_fit_post_load - allow process images after loading finished
CONFIG_CQSPI_REF_CLK
CONFIG_CS8900_BUS16
CONFIG_CS8900_BUS32
-CONFIG_CSF_SIZE
CONFIG_CTL_JTAG
CONFIG_CTL_TBE
CONFIG_CUSTOMER_BOARD_SUPPORT
#include <image.h>
#include <tee/optee.h>
#include <u-boot/crc.h>
+#include <imximage.h>
static image_header_t header;
if (params->type == IH_TYPE_FIRMWARE_IVT)
/* Add size of CSF minus IVT */
- imagesize = sbuf->st_size - sizeof(image_header_t) + 0x1FE0;
+ imagesize = sbuf->st_size - sizeof(image_header_t)
+ + 0x2060 - sizeof(flash_header_v2_t);
+
else
imagesize = sbuf->st_size - sizeof(image_header_t);
objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 $srctree/lpddr4_pmu_train_2d_imem.bin lpddr4_pmu_train_2d_imem_pad.bin
cat lpddr4_pmu_train_1d_imem_pad.bin lpddr4_pmu_train_1d_dmem_pad.bin > lpddr4_pmu_train_1d_fw.bin
cat lpddr4_pmu_train_2d_imem_pad.bin $srctree/lpddr4_pmu_train_2d_dmem.bin > lpddr4_pmu_train_2d_fw.bin
- cat spl/u-boot-spl.bin lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin > spl/u-boot-spl-ddr.bin
- rm -f lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin lpddr4_pmu_train_1d_imem_pad.bin lpddr4_pmu_train_1d_dmem_pad.bin lpddr4_pmu_train_2d_imem_pad.bin
+ dd if=spl/u-boot-spl.bin of=spl/u-boot-spl-pad.bin bs=4 conv=sync
+ cat spl/u-boot-spl-pad.bin lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin > spl/u-boot-spl-ddr.bin
+ rm -f lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin lpddr4_pmu_train_1d_imem_pad.bin lpddr4_pmu_train_1d_dmem_pad.bin lpddr4_pmu_train_2d_imem_pad.bin spl/u-boot-spl-pad.bin
fi
fi
break;
case CMD_SIGNED_HDMI:
signed_hdmi = token;
- case CMD_FIT:
- using_fit = 1;
break;
case CMD_DDR_FW:
/* Do nothing */
name, lineno, token);
exit(EXIT_FAILURE);
}
+ switch (*cmd) {
+ case CMD_FIT:
+ using_fit = 1;
+ break;
+ }
break;
case CFG_REG_SIZE:
parse_cfg_cmd(*cmd, token, name, lineno);
#ifdef CONFIG_SPL_SIZE_LIMIT
spl_size_limit = CONFIG_SPL_SIZE_LIMIT;
+#if defined(CONFIG_IMX_HAB) && defined(CONFIG_CSF_SIZE)
+ spl_size_limit -= CONFIG_CSF_SIZE;
+#endif
#ifdef CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD
spl_size_limit -= GENERATED_GBL_DATA_SIZE;
#endif
projects / oweals / u-boot.git / commitdiff
