LIBS += drivers/qe/qe.a
endif
LIBS += drivers/serial/libserial.a
+LIBS += drivers/usb/libusb.a
LIBS += post/libpost.a post/drivers/libpostdrivers.a
LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
"post/lib_$(ARCH)/libpost$(ARCH).a"; fi)
COBJS-y += ps2ser.o
COBJS-y += ps2mult.o
-#
-# USB Drivers
-#
-COBJS-y += isp116x-hcd.o
-COBJS-y += sl811_usb.o
-COBJS-y += usb_ohci.o
-COBJS-y += usbdcore.o
-COBJS-y += usbdcore_ep0.o
-COBJS-y += usbdcore_mpc8xx.o
-COBJS-y += usbdcore_omap1510.o
-
#
# Miscellaneous Drivers
#
+++ /dev/null
-/*
- * ISP116x HCD (Host Controller Driver) for u-boot.
- *
- * Copyright (C) 2006-2007 Rodolfo Giometti <giometti@linux.it>
- * Copyright (C) 2006-2007 Eurotech S.p.A. <info@eurotech.it>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- *
- * Derived in part from the SL811 HCD driver "u-boot/drivers/sl811_usb.c"
- * (original copyright message follows):
- *
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This code is based on linux driver for sl811hs chip, source at
- * drivers/usb/host/sl811.c:
- *
- * SL811 Host Controller Interface driver for USB.
- *
- * Copyright (c) 2003/06, Courage Co., Ltd.
- *
- * Based on:
- * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap,
- * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber,
- * Adam Richter, Gregory P. Smith;
- * 2.Original SL811 driver (hc_sl811.o) by Pei Liu <pbl@cypress.com>
- * 3.Rewrited as sl811.o by Yin Aihua <yinah:couragetech.com.cn>
- *
- * [[GNU/GPL disclaimer]]
- *
- * and in part from AU1x00 OHCI HCD driver "u-boot/cpu/mips/au1x00_usb_ohci.c"
- * (original copyright message follows):
- *
- * URB OHCI HCD (Host Controller Driver) for USB on the AU1x00.
- *
- * (C) Copyright 2003
- * Gary Jennejohn, DENX Software Engineering <gj@denx.de>
- *
- * [[GNU/GPL disclaimer]]
- *
- * Note: Part of this code has been derived from linux
- */
-
-#include <common.h>
-
-#ifdef CONFIG_USB_ISP116X_HCD
-#include <asm/io.h>
-#include <usb.h>
-#include <malloc.h>
-#include <linux/list.h>
-
-/*
- * ISP116x chips require certain delays between accesses to its
- * registers. The following timing options exist.
- *
- * 1. Configure your memory controller (the best)
- * 2. Use ndelay (easiest, poorest). For that, enable the following macro.
- *
- * Value is in microseconds.
- */
-#ifdef ISP116X_HCD_USE_UDELAY
-#define UDELAY 1
-#endif
-
-/*
- * On some (slowly?) machines an extra delay after data packing into
- * controller's FIFOs is required, * otherwise you may get the following
- * error:
- *
- * uboot> usb start
- * (Re)start USB...
- * USB: scanning bus for devices... isp116x: isp116x_submit_job: CTL:TIMEOUT
- * isp116x: isp116x_submit_job: ****** FIFO not ready! ******
- *
- * USB device not responding, giving up (status=4)
- * isp116x: isp116x_submit_job: ****** FIFO not empty! ******
- * isp116x: isp116x_submit_job: ****** FIFO not empty! ******
- * isp116x: isp116x_submit_job: ****** FIFO not empty! ******
- * 3 USB Device(s) found
- * scanning bus for storage devices... 0 Storage Device(s) found
- *
- * Value is in milliseconds.
- */
-#ifdef ISP116X_HCD_USE_EXTRA_DELAY
-#define EXTRA_DELAY 2
-#endif
-
-/*
- * Enable the following defines if you wish enable debugging messages.
- */
-#undef DEBUG /* enable debugging messages */
-#undef TRACE /* enable tracing code */
-#undef VERBOSE /* verbose debugging messages */
-
-#include "isp116x.h"
-
-#define DRIVER_VERSION "08 Jan 2007"
-static const char hcd_name[] = "isp116x-hcd";
-
-struct isp116x isp116x_dev;
-struct isp116x_platform_data isp116x_board;
-static int got_rhsc; /* root hub status change */
-struct usb_device *devgone; /* device which was disconnected */
-static int rh_devnum; /* address of Root Hub endpoint */
-
-/* ------------------------------------------------------------------------- */
-
-#define ALIGN(x,a) (((x)+(a)-1UL)&~((a)-1UL))
-#define min_t(type,x,y) \
- ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
-
-/* ------------------------------------------------------------------------- */
-
-static int isp116x_reset(struct isp116x *isp116x);
-
-/* --- Debugging functions ------------------------------------------------- */
-
-#define isp116x_show_reg(d, r) { \
- if ((r) < 0x20) { \
- DBG("%-12s[%02x]: %08x", #r, \
- r, isp116x_read_reg32(d, r)); \
- } else { \
- DBG("%-12s[%02x]: %04x", #r, \
- r, isp116x_read_reg16(d, r)); \
- } \
-}
-
-#define isp116x_show_regs(d) { \
- isp116x_show_reg(d, HCREVISION); \
- isp116x_show_reg(d, HCCONTROL); \
- isp116x_show_reg(d, HCCMDSTAT); \
- isp116x_show_reg(d, HCINTSTAT); \
- isp116x_show_reg(d, HCINTENB); \
- isp116x_show_reg(d, HCFMINTVL); \
- isp116x_show_reg(d, HCFMREM); \
- isp116x_show_reg(d, HCFMNUM); \
- isp116x_show_reg(d, HCLSTHRESH); \
- isp116x_show_reg(d, HCRHDESCA); \
- isp116x_show_reg(d, HCRHDESCB); \
- isp116x_show_reg(d, HCRHSTATUS); \
- isp116x_show_reg(d, HCRHPORT1); \
- isp116x_show_reg(d, HCRHPORT2); \
- isp116x_show_reg(d, HCHWCFG); \
- isp116x_show_reg(d, HCDMACFG); \
- isp116x_show_reg(d, HCXFERCTR); \
- isp116x_show_reg(d, HCuPINT); \
- isp116x_show_reg(d, HCuPINTENB); \
- isp116x_show_reg(d, HCCHIPID); \
- isp116x_show_reg(d, HCSCRATCH); \
- isp116x_show_reg(d, HCITLBUFLEN); \
- isp116x_show_reg(d, HCATLBUFLEN); \
- isp116x_show_reg(d, HCBUFSTAT); \
- isp116x_show_reg(d, HCRDITL0LEN); \
- isp116x_show_reg(d, HCRDITL1LEN); \
-}
-
-#if defined(TRACE)
-
-static int isp116x_get_current_frame_number(struct usb_device *usb_dev)
-{
- struct isp116x *isp116x = &isp116x_dev;
-
- return isp116x_read_reg32(isp116x, HCFMNUM);
-}
-
-static void dump_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int len, char *str)
-{
-#if defined(VERBOSE)
- int i;
-#endif
-
- DBG("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d stat:%#lx",
- str,
- isp116x_get_current_frame_number(dev),
- usb_pipedevice(pipe),
- usb_pipeendpoint(pipe),
- usb_pipeout(pipe) ? 'O' : 'I',
- usb_pipetype(pipe) < 2 ?
- (usb_pipeint(pipe) ?
- "INTR" : "ISOC") :
- (usb_pipecontrol(pipe) ? "CTRL" : "BULK"), len, dev->status);
-#if defined(VERBOSE)
- if (len > 0 && buffer) {
- printf(__FILE__ ": data(%d):", len);
- for (i = 0; i < 16 && i < len; i++)
- printf(" %02x", ((__u8 *) buffer)[i]);
- printf("%s\n", i < len ? "..." : "");
- }
-#endif
-}
-
-#define PTD_DIR_STR(ptd) ({char __c; \
- switch(PTD_GET_DIR(ptd)){ \
- case 0: __c = 's'; break; \
- case 1: __c = 'o'; break; \
- default: __c = 'i'; break; \
- }; __c;})
-
-/*
- Dump PTD info. The code documents the format
- perfectly, right :)
-*/
-static inline void dump_ptd(struct ptd *ptd)
-{
-#if defined(VERBOSE)
- int k;
-#endif
-
- DBG("PTD(ext) : cc:%x %d%c%d %d,%d,%d t:%x %x%x%x",
- PTD_GET_CC(ptd),
- PTD_GET_FA(ptd), PTD_DIR_STR(ptd), PTD_GET_EP(ptd),
- PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd),
- PTD_GET_TOGGLE(ptd),
- PTD_GET_ACTIVE(ptd), PTD_GET_SPD(ptd), PTD_GET_LAST(ptd));
-#if defined(VERBOSE)
- printf("isp116x: %s: PTD(byte): ", __FUNCTION__);
- for (k = 0; k < sizeof(struct ptd); ++k)
- printf("%02x ", ((u8 *) ptd)[k]);
- printf("\n");
-#endif
-}
-
-static inline void dump_ptd_data(struct ptd *ptd, u8 * buf, int type)
-{
-#if defined(VERBOSE)
- int k;
-
- if (type == 0 /* 0ut data */ ) {
- printf("isp116x: %s: out data: ", __FUNCTION__);
- for (k = 0; k < PTD_GET_LEN(ptd); ++k)
- printf("%02x ", ((u8 *) buf)[k]);
- printf("\n");
- }
- if (type == 1 /* 1n data */ ) {
- printf("isp116x: %s: in data: ", __FUNCTION__);
- for (k = 0; k < PTD_GET_COUNT(ptd); ++k)
- printf("%02x ", ((u8 *) buf)[k]);
- printf("\n");
- }
-
- if (PTD_GET_LAST(ptd))
- DBG("--- last PTD ---");
-#endif
-}
-
-#else
-
-#define dump_msg(dev, pipe, buffer, len, str) do { } while (0)
-#define dump_pkt(dev, pipe, buffer, len, setup, str, small) do {} while (0)
-
-#define dump_ptd(ptd) do {} while (0)
-#define dump_ptd_data(ptd, buf, type) do {} while (0)
-
-#endif
-
-/* --- Virtual Root Hub ---------------------------------------------------- */
-
-/* Device descriptor */
-static __u8 root_hub_dev_des[] = {
- 0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
- 0x10, /* __u16 bcdUSB; v1.1 */
- 0x01,
- 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
- 0x00, /* __u8 bDeviceSubClass; */
- 0x00, /* __u8 bDeviceProtocol; */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
- 0x00, /* __u16 idVendor; */
- 0x00,
- 0x00, /* __u16 idProduct; */
- 0x00,
- 0x00, /* __u16 bcdDevice; */
- 0x00,
- 0x00, /* __u8 iManufacturer; */
- 0x01, /* __u8 iProduct; */
- 0x00, /* __u8 iSerialNumber; */
- 0x01 /* __u8 bNumConfigurations; */
-};
-
-/* Configuration descriptor */
-static __u8 root_hub_config_des[] = {
- 0x09, /* __u8 bLength; */
- 0x02, /* __u8 bDescriptorType; Configuration */
- 0x19, /* __u16 wTotalLength; */
- 0x00,
- 0x01, /* __u8 bNumInterfaces; */
- 0x01, /* __u8 bConfigurationValue; */
- 0x00, /* __u8 iConfiguration; */
- 0x40, /* __u8 bmAttributes;
- Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
- 0x00, /* __u8 MaxPower; */
-
- /* interface */
- 0x09, /* __u8 if_bLength; */
- 0x04, /* __u8 if_bDescriptorType; Interface */
- 0x00, /* __u8 if_bInterfaceNumber; */
- 0x00, /* __u8 if_bAlternateSetting; */
- 0x01, /* __u8 if_bNumEndpoints; */
- 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
- 0x00, /* __u8 if_bInterfaceSubClass; */
- 0x00, /* __u8 if_bInterfaceProtocol; */
- 0x00, /* __u8 if_iInterface; */
-
- /* endpoint */
- 0x07, /* __u8 ep_bLength; */
- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
- 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x00, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
- 0x02,
- 0xff /* __u8 ep_bInterval; 255 ms */
-};
-
-static unsigned char root_hub_str_index0[] = {
- 0x04, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 0x09, /* __u8 lang ID */
- 0x04, /* __u8 lang ID */
-};
-
-static unsigned char root_hub_str_index1[] = {
- 0x22, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 'I', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'S', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'P', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- '1', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- '1', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- '6', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'x', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'R', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 't', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'H', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'u', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'b', /* __u8 Unicode */
- 0, /* __u8 Unicode */
-};
-
-/*
- * Hub class-specific descriptor is constructed dynamically
- */
-
-/* --- Virtual root hub management functions ------------------------------- */
-
-static int rh_check_port_status(struct isp116x *isp116x)
-{
- u32 temp, ndp, i;
- int res;
-
- res = -1;
- temp = isp116x_read_reg32(isp116x, HCRHSTATUS);
- ndp = (temp & RH_A_NDP);
- for (i = 0; i < ndp; i++) {
- temp = isp116x_read_reg32(isp116x, HCRHPORT1 + i);
- /* check for a device disconnect */
- if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
- (RH_PS_PESC | RH_PS_CSC)) && ((temp & RH_PS_CCS) == 0)) {
- res = i;
- break;
- }
- }
- return res;
-}
-
-/* --- HC management functions --------------------------------------------- */
-
-/* Write len bytes to fifo, pad till 32-bit boundary
- */
-static void write_ptddata_to_fifo(struct isp116x *isp116x, void *buf, int len)
-{
- u8 *dp = (u8 *) buf;
- u16 *dp2 = (u16 *) buf;
- u16 w;
- int quot = len % 4;
-
- if ((unsigned long)dp2 & 1) {
- /* not aligned */
- for (; len > 1; len -= 2) {
- w = *dp++;
- w |= *dp++ << 8;
- isp116x_raw_write_data16(isp116x, w);
- }
- if (len)
- isp116x_write_data16(isp116x, (u16) * dp);
- } else {
- /* aligned */
- for (; len > 1; len -= 2)
- isp116x_raw_write_data16(isp116x, *dp2++);
- if (len)
- isp116x_write_data16(isp116x, 0xff & *((u8 *) dp2));
- }
- if (quot == 1 || quot == 2)
- isp116x_raw_write_data16(isp116x, 0);
-}
-
-/* Read len bytes from fifo and then read till 32-bit boundary
- */
-static void read_ptddata_from_fifo(struct isp116x *isp116x, void *buf, int len)
-{
- u8 *dp = (u8 *) buf;
- u16 *dp2 = (u16 *) buf;
- u16 w;
- int quot = len % 4;
-
- if ((unsigned long)dp2 & 1) {
- /* not aligned */
- for (; len > 1; len -= 2) {
- w = isp116x_raw_read_data16(isp116x);
- *dp++ = w & 0xff;
- *dp++ = (w >> 8) & 0xff;
- }
- if (len)
- *dp = 0xff & isp116x_read_data16(isp116x);
- } else {
- /* aligned */
- for (; len > 1; len -= 2)
- *dp2++ = isp116x_raw_read_data16(isp116x);
- if (len)
- *(u8 *) dp2 = 0xff & isp116x_read_data16(isp116x);
- }
- if (quot == 1 || quot == 2)
- isp116x_raw_read_data16(isp116x);
-}
-
-/* Write PTD's and data for scheduled transfers into the fifo ram.
- * Fifo must be empty and ready */
-static void pack_fifo(struct isp116x *isp116x, struct usb_device *dev,
- unsigned long pipe, struct ptd *ptd, int n, void *data,
- int len)
-{
- int buflen = n * sizeof(struct ptd) + len;
- int i, done;
-
- DBG("--- pack buffer %p - %d bytes (fifo %d) ---", data, len, buflen);
-
- isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT);
- isp116x_write_reg16(isp116x, HCXFERCTR, buflen);
- isp116x_write_addr(isp116x, HCATLPORT | ISP116x_WRITE_OFFSET);
-
- done = 0;
- for (i = 0; i < n; i++) {
- DBG("i=%d - done=%d - len=%d", i, done, PTD_GET_LEN(&ptd[i]));
-
- dump_ptd(&ptd[i]);
- isp116x_write_data16(isp116x, ptd[i].count);
- isp116x_write_data16(isp116x, ptd[i].mps);
- isp116x_write_data16(isp116x, ptd[i].len);
- isp116x_write_data16(isp116x, ptd[i].faddr);
-
- dump_ptd_data(&ptd[i], (__u8 *) data + done, 0);
- write_ptddata_to_fifo(isp116x,
- (__u8 *) data + done,
- PTD_GET_LEN(&ptd[i]));
-
- done += PTD_GET_LEN(&ptd[i]);
- }
-}
-
-/* Read the processed PTD's and data from fifo ram back to URBs' buffers.
- * Fifo must be full and done */
-static int unpack_fifo(struct isp116x *isp116x, struct usb_device *dev,
- unsigned long pipe, struct ptd *ptd, int n, void *data,
- int len)
-{
- int buflen = n * sizeof(struct ptd) + len;
- int i, done, cc, ret;
-
- isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT);
- isp116x_write_reg16(isp116x, HCXFERCTR, buflen);
- isp116x_write_addr(isp116x, HCATLPORT);
-
- ret = TD_CC_NOERROR;
- done = 0;
- for (i = 0; i < n; i++) {
- DBG("i=%d - done=%d - len=%d", i, done, PTD_GET_LEN(&ptd[i]));
-
- ptd[i].count = isp116x_read_data16(isp116x);
- ptd[i].mps = isp116x_read_data16(isp116x);
- ptd[i].len = isp116x_read_data16(isp116x);
- ptd[i].faddr = isp116x_read_data16(isp116x);
- dump_ptd(&ptd[i]);
-
- read_ptddata_from_fifo(isp116x,
- (__u8 *) data + done,
- PTD_GET_LEN(&ptd[i]));
- dump_ptd_data(&ptd[i], (__u8 *) data + done, 1);
-
- done += PTD_GET_LEN(&ptd[i]);
-
- cc = PTD_GET_CC(&ptd[i]);
-
- /* Data underrun means basically that we had more buffer space than
- * the function had data. It is perfectly normal but upper levels have
- * to know how much we actually transferred.
- */
- if (cc == TD_NOTACCESSED ||
- (cc != TD_CC_NOERROR && (ret == TD_CC_NOERROR || ret == TD_DATAUNDERRUN)))
- ret = cc;
- }
-
- DBG("--- unpack buffer %p - %d bytes (fifo %d) ---", data, len, buflen);
-
- return ret;
-}
-
-/* Interrupt handling
- */
-static int isp116x_interrupt(struct isp116x *isp116x)
-{
- u16 irqstat;
- u32 intstat;
- int ret = 0;
-
- isp116x_write_reg16(isp116x, HCuPINTENB, 0);
- irqstat = isp116x_read_reg16(isp116x, HCuPINT);
- isp116x_write_reg16(isp116x, HCuPINT, irqstat);
- DBG(">>>>>> irqstat %x <<<<<<", irqstat);
-
- if (irqstat & HCuPINT_ATL) {
- DBG(">>>>>> HCuPINT_ATL <<<<<<");
- udelay(500);
- ret = 1;
- }
-
- if (irqstat & HCuPINT_OPR) {
- intstat = isp116x_read_reg32(isp116x, HCINTSTAT);
- isp116x_write_reg32(isp116x, HCINTSTAT, intstat);
- DBG(">>>>>> HCuPINT_OPR %x <<<<<<", intstat);
-
- if (intstat & HCINT_UE) {
- ERR("unrecoverable error, controller disabled");
-
- /* FIXME: be optimistic, hope that bug won't repeat
- * often. Make some non-interrupt context restart the
- * controller. Count and limit the retries though;
- * either hardware or software errors can go forever...
- */
- isp116x_reset(isp116x);
- ret = -1;
- return -1;
- }
-
- if (intstat & HCINT_RHSC) {
- got_rhsc = 1;
- ret = 1;
- /* When root hub or any of its ports is going
- to come out of suspend, it may take more
- than 10ms for status bits to stabilize. */
- wait_ms(20);
- }
-
- if (intstat & HCINT_SO) {
- ERR("schedule overrun");
- ret = -1;
- }
-
- irqstat &= ~HCuPINT_OPR;
- }
-
- return ret;
-}
-
-/* With one PTD we can transfer almost 1K in one go;
- * HC does the splitting into endpoint digestible transactions
- */
-struct ptd ptd[1];
-
-static inline int max_transfer_len(struct usb_device *dev, unsigned long pipe)
-{
- unsigned mpck = usb_maxpacket(dev, pipe);
-
- /* One PTD can transfer 1023 bytes but try to always
- * transfer multiples of endpoint buffer size
- */
- return 1023 / mpck * mpck;
-}
-
-/* Do an USB transfer
- */
-static int isp116x_submit_job(struct usb_device *dev, unsigned long pipe,
- int dir, void *buffer, int len)
-{
- struct isp116x *isp116x = &isp116x_dev;
- int type = usb_pipetype(pipe);
- int epnum = usb_pipeendpoint(pipe);
- int max = usb_maxpacket(dev, pipe);
- int dir_out = usb_pipeout(pipe);
- int speed_low = usb_pipeslow(pipe);
- int i, done = 0, stat, timeout, cc;
-
- /* 500 frames or 0.5s timeout when function is busy and NAKs transactions for a while */
- int retries = 500;
-
- DBG("------------------------------------------------");
- dump_msg(dev, pipe, buffer, len, "SUBMIT");
- DBG("------------------------------------------------");
-
- if (len >= 1024) {
- ERR("Too big job");
- dev->status = USB_ST_CRC_ERR;
- return -1;
- }
-
- if (isp116x->disabled) {
- ERR("EPIPE");
- dev->status = USB_ST_CRC_ERR;
- return -1;
- }
-
- /* device pulled? Shortcut the action. */
- if (devgone == dev) {
- ERR("ENODEV");
- dev->status = USB_ST_CRC_ERR;
- return USB_ST_CRC_ERR;
- }
-
- if (!max) {
- ERR("pipesize for pipe %lx is zero", pipe);
- dev->status = USB_ST_CRC_ERR;
- return -1;
- }
-
- if (type == PIPE_ISOCHRONOUS) {
- ERR("isochronous transfers not supported");
- dev->status = USB_ST_CRC_ERR;
- return -1;
- }
-
- /* FIFO not empty? */
- if (isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_FULL) {
- ERR("****** FIFO not empty! ******");
- dev->status = USB_ST_BUF_ERR;
- return -1;
- }
-
- retry:
- isp116x_write_reg32(isp116x, HCINTSTAT, 0xff);
-
- /* Prepare the PTD data */
- ptd->count = PTD_CC_MSK | PTD_ACTIVE_MSK |
- PTD_TOGGLE(usb_gettoggle(dev, epnum, dir_out));
- ptd->mps = PTD_MPS(max) | PTD_SPD(speed_low) | PTD_EP(epnum) | PTD_LAST_MSK;
- ptd->len = PTD_LEN(len) | PTD_DIR(dir);
- ptd->faddr = PTD_FA(usb_pipedevice(pipe));
-
-retry_same:
- /* Pack data into FIFO ram */
- pack_fifo(isp116x, dev, pipe, ptd, 1, buffer, len);
-#ifdef EXTRA_DELAY
- wait_ms(EXTRA_DELAY);
-#endif
-
- /* Start the data transfer */
-
- /* Allow more time for a BULK device to react - some are slow */
- if (usb_pipetype(pipe) == PIPE_BULK)
- timeout = 5000;
- else
- timeout = 100;
-
- /* Wait for it to complete */
- for (;;) {
- /* Check whether the controller is done */
- stat = isp116x_interrupt(isp116x);
-
- if (stat < 0) {
- dev->status = USB_ST_CRC_ERR;
- break;
- }
- if (stat > 0)
- break;
-
- /* Check the timeout */
- if (--timeout)
- udelay(1);
- else {
- ERR("CTL:TIMEOUT ");
- stat = USB_ST_CRC_ERR;
- break;
- }
- }
-
- /* We got an Root Hub Status Change interrupt */
- if (got_rhsc) {
- isp116x_show_regs(isp116x);
-
- got_rhsc = 0;
-
- /* Abuse timeout */
- timeout = rh_check_port_status(isp116x);
- if (timeout >= 0) {
- /*
- * FIXME! NOTE! AAAARGH!
- * This is potentially dangerous because it assumes
- * that only one device is ever plugged in!
- */
- devgone = dev;
- }
- }
-
- /* Ok, now we can read transfer status */
-
- /* FIFO not ready? */
- if (!(isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_DONE)) {
- ERR("****** FIFO not ready! ******");
- dev->status = USB_ST_BUF_ERR;
- return -1;
- }
-
- /* Unpack data from FIFO ram */
- cc = unpack_fifo(isp116x, dev, pipe, ptd, 1, buffer, len);
-
- i = PTD_GET_COUNT(ptd);
- done += i;
- buffer += i;
- len -= i;
-
- /* There was some kind of real problem; Prepare the PTD again
- * and retry from the failed transaction on
- */
- if (cc && cc != TD_NOTACCESSED && cc != TD_DATAUNDERRUN) {
- if (retries >= 100) {
- retries -= 100;
- /* The chip will have toggled the toggle bit for the failed
- * transaction too. We have to toggle it back.
- */
- usb_settoggle(dev, epnum, dir_out, !PTD_GET_TOGGLE(ptd));
- goto retry;
- }
- }
- /* "Normal" errors; TD_NOTACCESSED would mean in effect that the function have NAKed
- * the transactions from the first on for the whole frame. It may be busy and we retry
- * with the same PTD. PTD_ACTIVE (and not TD_NOTACCESSED) would mean that some of the
- * PTD didn't make it because the function was busy or the frame ended before the PTD
- * finished. We prepare the rest of the data and try again.
- */
- else if (cc == TD_NOTACCESSED || PTD_GET_ACTIVE(ptd) || (cc != TD_DATAUNDERRUN && PTD_GET_COUNT(ptd) < PTD_GET_LEN(ptd))) {
- if (retries) {
- --retries;
- if (cc == TD_NOTACCESSED && PTD_GET_ACTIVE(ptd) && !PTD_GET_COUNT(ptd)) goto retry_same;
- usb_settoggle(dev, epnum, dir_out, PTD_GET_TOGGLE(ptd));
- goto retry;
- }
- }
-
- if (cc != TD_CC_NOERROR && cc != TD_DATAUNDERRUN) {
- DBG("****** completition code error %x ******", cc);
- switch (cc) {
- case TD_CC_BITSTUFFING:
- dev->status = USB_ST_BIT_ERR;
- break;
- case TD_CC_STALL:
- dev->status = USB_ST_STALLED;
- break;
- case TD_BUFFEROVERRUN:
- case TD_BUFFERUNDERRUN:
- dev->status = USB_ST_BUF_ERR;
- break;
- default:
- dev->status = USB_ST_CRC_ERR;
- }
- return -cc;
- }
- else usb_settoggle(dev, epnum, dir_out, PTD_GET_TOGGLE(ptd));
-
- dump_msg(dev, pipe, buffer, len, "SUBMIT(ret)");
-
- dev->status = 0;
- return done;
-}
-
-/* Adapted from au1x00_usb_ohci.c
- */
-static int isp116x_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
- void *buffer, int transfer_len,
- struct devrequest *cmd)
-{
- struct isp116x *isp116x = &isp116x_dev;
- u32 tmp = 0;
-
- int leni = transfer_len;
- int len = 0;
- int stat = 0;
- u32 datab[4];
- u8 *data_buf = (u8 *) datab;
- u16 bmRType_bReq;
- u16 wValue;
- u16 wIndex;
- u16 wLength;
-
- if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
- INFO("Root-Hub submit IRQ: NOT implemented");
- return 0;
- }
-
- bmRType_bReq = cmd->requesttype | (cmd->request << 8);
- wValue = swap_16(cmd->value);
- wIndex = swap_16(cmd->index);
- wLength = swap_16(cmd->length);
-
- DBG("--- HUB ----------------------------------------");
- DBG("submit rh urb, req=%x val=%#x index=%#x len=%d",
- bmRType_bReq, wValue, wIndex, wLength);
- dump_msg(dev, pipe, buffer, transfer_len, "RH");
- DBG("------------------------------------------------");
-
- switch (bmRType_bReq) {
- case RH_GET_STATUS:
- DBG("RH_GET_STATUS");
-
- *(__u16 *) data_buf = swap_16(1);
- len = 2;
- break;
-
- case RH_GET_STATUS | RH_INTERFACE:
- DBG("RH_GET_STATUS | RH_INTERFACE");
-
- *(__u16 *) data_buf = swap_16(0);
- len = 2;
- break;
-
- case RH_GET_STATUS | RH_ENDPOINT:
- DBG("RH_GET_STATUS | RH_ENDPOINT");
-
- *(__u16 *) data_buf = swap_16(0);
- len = 2;
- break;
-
- case RH_GET_STATUS | RH_CLASS:
- DBG("RH_GET_STATUS | RH_CLASS");
-
- tmp = isp116x_read_reg32(isp116x, HCRHSTATUS);
-
- *(__u32 *) data_buf = swap_32(tmp & ~(RH_HS_CRWE | RH_HS_DRWE));
- len = 4;
- break;
-
- case RH_GET_STATUS | RH_OTHER | RH_CLASS:
- DBG("RH_GET_STATUS | RH_OTHER | RH_CLASS");
-
- tmp = isp116x_read_reg32(isp116x, HCRHPORT1 + wIndex - 1);
- *(__u32 *) data_buf = swap_32(tmp);
- isp116x_show_regs(isp116x);
- len = 4;
- break;
-
- case RH_CLEAR_FEATURE | RH_ENDPOINT:
- DBG("RH_CLEAR_FEATURE | RH_ENDPOINT");
-
- switch (wValue) {
- case RH_ENDPOINT_STALL:
- DBG("C_HUB_ENDPOINT_STALL");
- len = 0;
- break;
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_CLASS:
- DBG("RH_CLEAR_FEATURE | RH_CLASS");
-
- switch (wValue) {
- case RH_C_HUB_LOCAL_POWER:
- DBG("C_HUB_LOCAL_POWER");
- len = 0;
- break;
-
- case RH_C_HUB_OVER_CURRENT:
- DBG("C_HUB_OVER_CURRENT");
- isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_OCIC);
- len = 0;
- break;
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
- DBG("RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS");
-
- switch (wValue) {
- case RH_PORT_ENABLE:
- isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
- RH_PS_CCS);
- len = 0;
- break;
-
- case RH_PORT_SUSPEND:
- isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
- RH_PS_POCI);
- len = 0;
- break;
-
- case RH_PORT_POWER:
- isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
- RH_PS_LSDA);
- len = 0;
- break;
-
- case RH_C_PORT_CONNECTION:
- isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
- RH_PS_CSC);
- len = 0;
- break;
-
- case RH_C_PORT_ENABLE:
- isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
- RH_PS_PESC);
- len = 0;
- break;
-
- case RH_C_PORT_SUSPEND:
- isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
- RH_PS_PSSC);
- len = 0;
- break;
-
- case RH_C_PORT_OVER_CURRENT:
- isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
- RH_PS_POCI);
- len = 0;
- break;
-
- case RH_C_PORT_RESET:
- isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
- RH_PS_PRSC);
- len = 0;
- break;
-
- default:
- ERR("invalid wValue");
- stat = USB_ST_STALLED;
- }
-
- isp116x_show_regs(isp116x);
-
- break;
-
- case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
- DBG("RH_SET_FEATURE | RH_OTHER | RH_CLASS");
-
- switch (wValue) {
- case RH_PORT_SUSPEND:
- isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
- RH_PS_PSS);
- len = 0;
- break;
-
- case RH_PORT_RESET:
- /* Spin until any current reset finishes */
- while (1) {
- tmp =
- isp116x_read_reg32(isp116x,
- HCRHPORT1 + wIndex - 1);
- if (!(tmp & RH_PS_PRS))
- break;
- wait_ms(1);
- }
- isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
- RH_PS_PRS);
- wait_ms(10);
-
- len = 0;
- break;
-
- case RH_PORT_POWER:
- isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
- RH_PS_PPS);
- len = 0;
- break;
-
- case RH_PORT_ENABLE:
- isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
- RH_PS_PES);
- len = 0;
- break;
-
- default:
- ERR("invalid wValue");
- stat = USB_ST_STALLED;
- }
-
- isp116x_show_regs(isp116x);
-
- break;
-
- case RH_SET_ADDRESS:
- DBG("RH_SET_ADDRESS");
-
- rh_devnum = wValue;
- len = 0;
- break;
-
- case RH_GET_DESCRIPTOR:
- DBG("RH_GET_DESCRIPTOR: %x, %d", wValue, wLength);
-
- switch (wValue) {
- case (USB_DT_DEVICE << 8): /* device descriptor */
- len = min_t(unsigned int,
- leni, min_t(unsigned int,
- sizeof(root_hub_dev_des),
- wLength));
- data_buf = root_hub_dev_des;
- break;
-
- case (USB_DT_CONFIG << 8): /* configuration descriptor */
- len = min_t(unsigned int,
- leni, min_t(unsigned int,
- sizeof(root_hub_config_des),
- wLength));
- data_buf = root_hub_config_des;
- break;
-
- case ((USB_DT_STRING << 8) | 0x00): /* string 0 descriptors */
- len = min_t(unsigned int,
- leni, min_t(unsigned int,
- sizeof(root_hub_str_index0),
- wLength));
- data_buf = root_hub_str_index0;
- break;
-
- case ((USB_DT_STRING << 8) | 0x01): /* string 1 descriptors */
- len = min_t(unsigned int,
- leni, min_t(unsigned int,
- sizeof(root_hub_str_index1),
- wLength));
- data_buf = root_hub_str_index1;
- break;
-
- default:
- ERR("invalid wValue");
- stat = USB_ST_STALLED;
- }
-
- break;
-
- case RH_GET_DESCRIPTOR | RH_CLASS:
- DBG("RH_GET_DESCRIPTOR | RH_CLASS");
-
- tmp = isp116x_read_reg32(isp116x, HCRHDESCA);
-
- data_buf[0] = 0x09; /* min length; */
- data_buf[1] = 0x29;
- data_buf[2] = tmp & RH_A_NDP;
- data_buf[3] = 0;
- if (tmp & RH_A_PSM) /* per-port power switching? */
- data_buf[3] |= 0x01;
- if (tmp & RH_A_NOCP) /* no overcurrent reporting? */
- data_buf[3] |= 0x10;
- else if (tmp & RH_A_OCPM) /* per-port overcurrent rep? */
- data_buf[3] |= 0x08;
-
- /* Corresponds to data_buf[4-7] */
- datab[1] = 0;
- data_buf[5] = (tmp & RH_A_POTPGT) >> 24;
-
- tmp = isp116x_read_reg32(isp116x, HCRHDESCB);
-
- data_buf[7] = tmp & RH_B_DR;
- if (data_buf[2] < 7)
- data_buf[8] = 0xff;
- else {
- data_buf[0] += 2;
- data_buf[8] = (tmp & RH_B_DR) >> 8;
- data_buf[10] = data_buf[9] = 0xff;
- }
-
- len = min_t(unsigned int, leni,
- min_t(unsigned int, data_buf[0], wLength));
- break;
-
- case RH_GET_CONFIGURATION:
- DBG("RH_GET_CONFIGURATION");
-
- *(__u8 *) data_buf = 0x01;
- len = 1;
- break;
-
- case RH_SET_CONFIGURATION:
- DBG("RH_SET_CONFIGURATION");
-
- isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPSC);
- len = 0;
- break;
-
- default:
- ERR("*** *** *** unsupported root hub command *** *** ***");
- stat = USB_ST_STALLED;
- }
-
- len = min_t(int, len, leni);
- if (buffer != data_buf)
- memcpy(buffer, data_buf, len);
-
- dev->act_len = len;
- dev->status = stat;
- DBG("dev act_len %d, status %d", dev->act_len, dev->status);
-
- dump_msg(dev, pipe, buffer, transfer_len, "RH(ret)");
-
- return stat;
-}
-
-/* --- Transfer functions -------------------------------------------------- */
-
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int len, int interval)
-{
- DBG("dev=%p pipe=%#lx buf=%p size=%d int=%d",
- dev, pipe, buffer, len, interval);
-
- return -1;
-}
-
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int len, struct devrequest *setup)
-{
- int devnum = usb_pipedevice(pipe);
- int epnum = usb_pipeendpoint(pipe);
- int max = max_transfer_len(dev, pipe);
- int dir_in = usb_pipein(pipe);
- int done, ret;
-
- /* Control message is for the HUB? */
- if (devnum == rh_devnum)
- return isp116x_submit_rh_msg(dev, pipe, buffer, len, setup);
-
- /* Ok, no HUB message so send the message to the device */
-
- /* Setup phase */
- DBG("--- SETUP PHASE --------------------------------");
- usb_settoggle(dev, epnum, 1, 0);
- ret = isp116x_submit_job(dev, pipe,
- PTD_DIR_SETUP,
- setup, sizeof(struct devrequest));
- if (ret < 0) {
- DBG("control setup phase error (ret = %d", ret);
- return -1;
- }
-
- /* Data phase */
- DBG("--- DATA PHASE ---------------------------------");
- done = 0;
- usb_settoggle(dev, epnum, !dir_in, 1);
- while (done < len) {
- ret = isp116x_submit_job(dev, pipe,
- dir_in ? PTD_DIR_IN : PTD_DIR_OUT,
- (__u8 *) buffer + done,
- max > len - done ? len - done : max);
- if (ret < 0) {
- DBG("control data phase error (ret = %d)", ret);
- return -1;
- }
- done += ret;
-
- if (dir_in && ret < max) /* short packet */
- break;
- }
-
- /* Status phase */
- DBG("--- STATUS PHASE -------------------------------");
- usb_settoggle(dev, epnum, !dir_in, 1);
- ret = isp116x_submit_job(dev, pipe,
- !dir_in ? PTD_DIR_IN : PTD_DIR_OUT, NULL, 0);
- if (ret < 0) {
- DBG("control status phase error (ret = %d", ret);
- return -1;
- }
-
- dev->act_len = done;
-
- dump_msg(dev, pipe, buffer, len, "DEV(ret)");
-
- return done;
-}
-
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int len)
-{
- int dir_out = usb_pipeout(pipe);
- int max = max_transfer_len(dev, pipe);
- int done, ret;
-
- DBG("--- BULK ---------------------------------------");
- DBG("dev=%ld pipe=%ld buf=%p size=%d dir_out=%d",
- usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out);
-
- done = 0;
- while (done < len) {
- ret = isp116x_submit_job(dev, pipe,
- !dir_out ? PTD_DIR_IN : PTD_DIR_OUT,
- (__u8 *) buffer + done,
- max > len - done ? len - done : max);
- if (ret < 0) {
- DBG("error on bulk message (ret = %d)", ret);
- return -1;
- }
-
- done += ret;
-
- if (!dir_out && ret < max) /* short packet */
- break;
- }
-
- dev->act_len = done;
-
- return 0;
-}
-
-/* --- Basic functions ----------------------------------------------------- */
-
-static int isp116x_sw_reset(struct isp116x *isp116x)
-{
- int retries = 15;
- int ret = 0;
-
- DBG("");
-
- isp116x->disabled = 1;
-
- isp116x_write_reg16(isp116x, HCSWRES, HCSWRES_MAGIC);
- isp116x_write_reg32(isp116x, HCCMDSTAT, HCCMDSTAT_HCR);
- while (--retries) {
- /* It usually resets within 1 ms */
- wait_ms(1);
- if (!(isp116x_read_reg32(isp116x, HCCMDSTAT) & HCCMDSTAT_HCR))
- break;
- }
- if (!retries) {
- ERR("software reset timeout");
- ret = -1;
- }
- return ret;
-}
-
-static int isp116x_reset(struct isp116x *isp116x)
-{
- unsigned long t;
- u16 clkrdy = 0;
- int ret, timeout = 15 /* ms */ ;
-
- DBG("");
-
- ret = isp116x_sw_reset(isp116x);
- if (ret)
- return ret;
-
- for (t = 0; t < timeout; t++) {
- clkrdy = isp116x_read_reg16(isp116x, HCuPINT) & HCuPINT_CLKRDY;
- if (clkrdy)
- break;
- wait_ms(1);
- }
- if (!clkrdy) {
- ERR("clock not ready after %dms", timeout);
- /* After sw_reset the clock won't report to be ready, if
- H_WAKEUP pin is high. */
- ERR("please make sure that the H_WAKEUP pin is pulled low!");
- ret = -1;
- }
- return ret;
-}
-
-static void isp116x_stop(struct isp116x *isp116x)
-{
- u32 val;
-
- DBG("");
-
- isp116x_write_reg16(isp116x, HCuPINTENB, 0);
-
- /* Switch off ports' power, some devices don't come up
- after next 'start' without this */
- val = isp116x_read_reg32(isp116x, HCRHDESCA);
- val &= ~(RH_A_NPS | RH_A_PSM);
- isp116x_write_reg32(isp116x, HCRHDESCA, val);
- isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPS);
-
- isp116x_sw_reset(isp116x);
-}
-
-/*
- * Configure the chip. The chip must be successfully reset by now.
- */
-static int isp116x_start(struct isp116x *isp116x)
-{
- struct isp116x_platform_data *board = isp116x->board;
- u32 val;
-
- DBG("");
-
- /* Clear interrupt status and disable all interrupt sources */
- isp116x_write_reg16(isp116x, HCuPINT, 0xff);
- isp116x_write_reg16(isp116x, HCuPINTENB, 0);
-
- isp116x_write_reg16(isp116x, HCITLBUFLEN, ISP116x_ITL_BUFSIZE);
- isp116x_write_reg16(isp116x, HCATLBUFLEN, ISP116x_ATL_BUFSIZE);
-
- /* Hardware configuration */
- val = HCHWCFG_DBWIDTH(1);
- if (board->sel15Kres)
- val |= HCHWCFG_15KRSEL;
- /* Remote wakeup won't work without working clock */
- if (board->remote_wakeup_enable)
- val |= HCHWCFG_CLKNOTSTOP;
- if (board->oc_enable)
- val |= HCHWCFG_ANALOG_OC;
- isp116x_write_reg16(isp116x, HCHWCFG, val);
-
- /* --- Root hub configuration */
- val = (25 << 24) & RH_A_POTPGT;
- /* AN10003_1.pdf recommends RH_A_NPS (no power switching) to
- be always set. Yet, instead, we request individual port
- power switching. */
- val |= RH_A_PSM;
- /* Report overcurrent per port */
- val |= RH_A_OCPM;
- isp116x_write_reg32(isp116x, HCRHDESCA, val);
- isp116x->rhdesca = isp116x_read_reg32(isp116x, HCRHDESCA);
-
- val = RH_B_PPCM;
- isp116x_write_reg32(isp116x, HCRHDESCB, val);
- isp116x->rhdescb = isp116x_read_reg32(isp116x, HCRHDESCB);
-
- val = 0;
- if (board->remote_wakeup_enable)
- val |= RH_HS_DRWE;
- isp116x_write_reg32(isp116x, HCRHSTATUS, val);
- isp116x->rhstatus = isp116x_read_reg32(isp116x, HCRHSTATUS);
-
- isp116x_write_reg32(isp116x, HCFMINTVL, 0x27782edf);
-
- /* Go operational */
- val = HCCONTROL_USB_OPER;
- if (board->remote_wakeup_enable)
- val |= HCCONTROL_RWE;
- isp116x_write_reg32(isp116x, HCCONTROL, val);
-
- /* Disable ports to avoid race in device enumeration */
- isp116x_write_reg32(isp116x, HCRHPORT1, RH_PS_CCS);
- isp116x_write_reg32(isp116x, HCRHPORT2, RH_PS_CCS);
-
- isp116x_show_regs(isp116x);
-
- isp116x->disabled = 0;
-
- return 0;
-}
-
-/* --- Init functions ------------------------------------------------------ */
-
-int isp116x_check_id(struct isp116x *isp116x)
-{
- int val;
-
- val = isp116x_read_reg16(isp116x, HCCHIPID);
- if ((val & HCCHIPID_MASK) != HCCHIPID_MAGIC) {
- ERR("invalid chip ID %04x", val);
- return -1;
- }
-
- return 0;
-}
-
-int usb_lowlevel_init(void)
-{
- struct isp116x *isp116x = &isp116x_dev;
-
- DBG("");
-
- got_rhsc = rh_devnum = 0;
-
- /* Init device registers addr */
- isp116x->addr_reg = (u16 *) ISP116X_HCD_ADDR;
- isp116x->data_reg = (u16 *) ISP116X_HCD_DATA;
-
- /* Setup specific board settings */
-#ifdef ISP116X_HCD_SEL15kRES
- isp116x_board.sel15Kres = 1;
-#endif
-#ifdef ISP116X_HCD_OC_ENABLE
- isp116x_board.oc_enable = 1;
-#endif
-#ifdef ISP116X_HCD_REMOTE_WAKEUP_ENABLE
- isp116x_board.remote_wakeup_enable = 1;
-#endif
- isp116x->board = &isp116x_board;
-
- /* Try to get ISP116x silicon chip ID */
- if (isp116x_check_id(isp116x) < 0)
- return -1;
-
- isp116x->disabled = 1;
- isp116x->sleeping = 0;
-
- isp116x_reset(isp116x);
- isp116x_start(isp116x);
-
- return 0;
-}
-
-int usb_lowlevel_stop(void)
-{
- struct isp116x *isp116x = &isp116x_dev;
-
- DBG("");
-
- if (!isp116x->disabled)
- isp116x_stop(isp116x);
-
- return 0;
-}
-
-#endif /* CONFIG_USB_ISP116X_HCD */
+++ /dev/null
-/*
- * ISP116x register declarations and HCD data structures
- *
- * Copyright (C) 2007 Rodolfo Giometti <giometti@linux.it>
- * Copyright (C) 2007 Eurotech S.p.A. <info@eurotech.it>
- * Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee>
- * Portions:
- * Copyright (C) 2004 Lothar Wassmann
- * Copyright (C) 2004 Psion Teklogix
- * Copyright (C) 2004 David Brownell
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifdef DEBUG
-#define DBG(fmt, args...) \
- printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args)
-#else
-#define DBG(fmt, args...) do {} while (0)
-#endif
-
-#ifdef VERBOSE
-# define VDBG DBG
-#else
-# define VDBG(fmt, args...) do {} while (0)
-#endif
-
-#define ERR(fmt, args...) \
- printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args)
-#define WARN(fmt, args...) \
- printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args)
-#define INFO(fmt, args...) \
- printf("isp116x: " fmt "\n" , ## args)
-
-/* ------------------------------------------------------------------------- */
-
-/* us of 1ms frame */
-#define MAX_LOAD_LIMIT 850
-
-/* Full speed: max # of bytes to transfer for a single urb
- at a time must be < 1024 && must be multiple of 64.
- 832 allows transfering 4kiB within 5 frames. */
-#define MAX_TRANSFER_SIZE_FULLSPEED 832
-
-/* Low speed: there is no reason to schedule in very big
- chunks; often the requested long transfers are for
- string descriptors containing short strings. */
-#define MAX_TRANSFER_SIZE_LOWSPEED 64
-
-/* Bytetime (us), a rough indication of how much time it
- would take to transfer a byte of useful data over USB */
-#define BYTE_TIME_FULLSPEED 1
-#define BYTE_TIME_LOWSPEED 20
-
-/* Buffer sizes */
-#define ISP116x_BUF_SIZE 4096
-#define ISP116x_ITL_BUFSIZE 0
-#define ISP116x_ATL_BUFSIZE ((ISP116x_BUF_SIZE) - 2*(ISP116x_ITL_BUFSIZE))
-
-#define ISP116x_WRITE_OFFSET 0x80
-
-/* --- ISP116x registers/bits ---------------------------------------------- */
-
-#define HCREVISION 0x00
-#define HCCONTROL 0x01
-#define HCCONTROL_HCFS (3 << 6) /* host controller
- functional state */
-#define HCCONTROL_USB_RESET (0 << 6)
-#define HCCONTROL_USB_RESUME (1 << 6)
-#define HCCONTROL_USB_OPER (2 << 6)
-#define HCCONTROL_USB_SUSPEND (3 << 6)
-#define HCCONTROL_RWC (1 << 9) /* remote wakeup connected */
-#define HCCONTROL_RWE (1 << 10) /* remote wakeup enable */
-#define HCCMDSTAT 0x02
-#define HCCMDSTAT_HCR (1 << 0) /* host controller reset */
-#define HCCMDSTAT_SOC (3 << 16) /* scheduling overrun count */
-#define HCINTSTAT 0x03
-#define HCINT_SO (1 << 0) /* scheduling overrun */
-#define HCINT_WDH (1 << 1) /* writeback of done_head */
-#define HCINT_SF (1 << 2) /* start frame */
-#define HCINT_RD (1 << 3) /* resume detect */
-#define HCINT_UE (1 << 4) /* unrecoverable error */
-#define HCINT_FNO (1 << 5) /* frame number overflow */
-#define HCINT_RHSC (1 << 6) /* root hub status change */
-#define HCINT_OC (1 << 30) /* ownership change */
-#define HCINT_MIE (1 << 31) /* master interrupt enable */
-#define HCINTENB 0x04
-#define HCINTDIS 0x05
-#define HCFMINTVL 0x0d
-#define HCFMREM 0x0e
-#define HCFMNUM 0x0f
-#define HCLSTHRESH 0x11
-#define HCRHDESCA 0x12
-#define RH_A_NDP (0x3 << 0) /* # downstream ports */
-#define RH_A_PSM (1 << 8) /* power switching mode */
-#define RH_A_NPS (1 << 9) /* no power switching */
-#define RH_A_DT (1 << 10) /* device type (mbz) */
-#define RH_A_OCPM (1 << 11) /* overcurrent protection
- mode */
-#define RH_A_NOCP (1 << 12) /* no overcurrent protection */
-#define RH_A_POTPGT (0xff << 24) /* power on -> power good
- time */
-#define HCRHDESCB 0x13
-#define RH_B_DR (0xffff << 0) /* device removable flags */
-#define RH_B_PPCM (0xffff << 16) /* port power control mask */
-#define HCRHSTATUS 0x14
-#define RH_HS_LPS (1 << 0) /* local power status */
-#define RH_HS_OCI (1 << 1) /* over current indicator */
-#define RH_HS_DRWE (1 << 15) /* device remote wakeup
- enable */
-#define RH_HS_LPSC (1 << 16) /* local power status change */
-#define RH_HS_OCIC (1 << 17) /* over current indicator
- change */
-#define RH_HS_CRWE (1 << 31) /* clear remote wakeup
- enable */
-#define HCRHPORT1 0x15
-#define RH_PS_CCS (1 << 0) /* current connect status */
-#define RH_PS_PES (1 << 1) /* port enable status */
-#define RH_PS_PSS (1 << 2) /* port suspend status */
-#define RH_PS_POCI (1 << 3) /* port over current
- indicator */
-#define RH_PS_PRS (1 << 4) /* port reset status */
-#define RH_PS_PPS (1 << 8) /* port power status */
-#define RH_PS_LSDA (1 << 9) /* low speed device attached */
-#define RH_PS_CSC (1 << 16) /* connect status change */
-#define RH_PS_PESC (1 << 17) /* port enable status change */
-#define RH_PS_PSSC (1 << 18) /* port suspend status
- change */
-#define RH_PS_OCIC (1 << 19) /* over current indicator
- change */
-#define RH_PS_PRSC (1 << 20) /* port reset status change */
-#define HCRHPORT_CLRMASK (0x1f << 16)
-#define HCRHPORT2 0x16
-#define HCHWCFG 0x20
-#define HCHWCFG_15KRSEL (1 << 12)
-#define HCHWCFG_CLKNOTSTOP (1 << 11)
-#define HCHWCFG_ANALOG_OC (1 << 10)
-#define HCHWCFG_DACK_MODE (1 << 8)
-#define HCHWCFG_EOT_POL (1 << 7)
-#define HCHWCFG_DACK_POL (1 << 6)
-#define HCHWCFG_DREQ_POL (1 << 5)
-#define HCHWCFG_DBWIDTH_MASK (0x03 << 3)
-#define HCHWCFG_DBWIDTH(n) (((n) << 3) & HCHWCFG_DBWIDTH_MASK)
-#define HCHWCFG_INT_POL (1 << 2)
-#define HCHWCFG_INT_TRIGGER (1 << 1)
-#define HCHWCFG_INT_ENABLE (1 << 0)
-#define HCDMACFG 0x21
-#define HCDMACFG_BURST_LEN_MASK (0x03 << 5)
-#define HCDMACFG_BURST_LEN(n) (((n) << 5) & HCDMACFG_BURST_LEN_MASK)
-#define HCDMACFG_BURST_LEN_1 HCDMACFG_BURST_LEN(0)
-#define HCDMACFG_BURST_LEN_4 HCDMACFG_BURST_LEN(1)
-#define HCDMACFG_BURST_LEN_8 HCDMACFG_BURST_LEN(2)
-#define HCDMACFG_DMA_ENABLE (1 << 4)
-#define HCDMACFG_BUF_TYPE_MASK (0x07 << 1)
-#define HCDMACFG_CTR_SEL (1 << 2)
-#define HCDMACFG_ITLATL_SEL (1 << 1)
-#define HCDMACFG_DMA_RW_SELECT (1 << 0)
-#define HCXFERCTR 0x22
-#define HCuPINT 0x24
-#define HCuPINT_SOF (1 << 0)
-#define HCuPINT_ATL (1 << 1)
-#define HCuPINT_AIIEOT (1 << 2)
-#define HCuPINT_OPR (1 << 4)
-#define HCuPINT_SUSP (1 << 5)
-#define HCuPINT_CLKRDY (1 << 6)
-#define HCuPINTENB 0x25
-#define HCCHIPID 0x27
-#define HCCHIPID_MASK 0xff00
-#define HCCHIPID_MAGIC 0x6100
-#define HCSCRATCH 0x28
-#define HCSWRES 0x29
-#define HCSWRES_MAGIC 0x00f6
-#define HCITLBUFLEN 0x2a
-#define HCATLBUFLEN 0x2b
-#define HCBUFSTAT 0x2c
-#define HCBUFSTAT_ITL0_FULL (1 << 0)
-#define HCBUFSTAT_ITL1_FULL (1 << 1)
-#define HCBUFSTAT_ATL_FULL (1 << 2)
-#define HCBUFSTAT_ITL0_DONE (1 << 3)
-#define HCBUFSTAT_ITL1_DONE (1 << 4)
-#define HCBUFSTAT_ATL_DONE (1 << 5)
-#define HCRDITL0LEN 0x2d
-#define HCRDITL1LEN 0x2e
-#define HCITLPORT 0x40
-#define HCATLPORT 0x41
-
-/* PTD accessor macros. */
-#define PTD_GET_COUNT(p) (((p)->count & PTD_COUNT_MSK) >> 0)
-#define PTD_COUNT(v) (((v) << 0) & PTD_COUNT_MSK)
-#define PTD_GET_TOGGLE(p) (((p)->count & PTD_TOGGLE_MSK) >> 10)
-#define PTD_TOGGLE(v) (((v) << 10) & PTD_TOGGLE_MSK)
-#define PTD_GET_ACTIVE(p) (((p)->count & PTD_ACTIVE_MSK) >> 11)
-#define PTD_ACTIVE(v) (((v) << 11) & PTD_ACTIVE_MSK)
-#define PTD_GET_CC(p) (((p)->count & PTD_CC_MSK) >> 12)
-#define PTD_CC(v) (((v) << 12) & PTD_CC_MSK)
-#define PTD_GET_MPS(p) (((p)->mps & PTD_MPS_MSK) >> 0)
-#define PTD_MPS(v) (((v) << 0) & PTD_MPS_MSK)
-#define PTD_GET_SPD(p) (((p)->mps & PTD_SPD_MSK) >> 10)
-#define PTD_SPD(v) (((v) << 10) & PTD_SPD_MSK)
-#define PTD_GET_LAST(p) (((p)->mps & PTD_LAST_MSK) >> 11)
-#define PTD_LAST(v) (((v) << 11) & PTD_LAST_MSK)
-#define PTD_GET_EP(p) (((p)->mps & PTD_EP_MSK) >> 12)
-#define PTD_EP(v) (((v) << 12) & PTD_EP_MSK)
-#define PTD_GET_LEN(p) (((p)->len & PTD_LEN_MSK) >> 0)
-#define PTD_LEN(v) (((v) << 0) & PTD_LEN_MSK)
-#define PTD_GET_DIR(p) (((p)->len & PTD_DIR_MSK) >> 10)
-#define PTD_DIR(v) (((v) << 10) & PTD_DIR_MSK)
-#define PTD_GET_B5_5(p) (((p)->len & PTD_B5_5_MSK) >> 13)
-#define PTD_B5_5(v) (((v) << 13) & PTD_B5_5_MSK)
-#define PTD_GET_FA(p) (((p)->faddr & PTD_FA_MSK) >> 0)
-#define PTD_FA(v) (((v) << 0) & PTD_FA_MSK)
-#define PTD_GET_FMT(p) (((p)->faddr & PTD_FMT_MSK) >> 7)
-#define PTD_FMT(v) (((v) << 7) & PTD_FMT_MSK)
-
-/* Hardware transfer status codes -- CC from ptd->count */
-#define TD_CC_NOERROR 0x00
-#define TD_CC_CRC 0x01
-#define TD_CC_BITSTUFFING 0x02
-#define TD_CC_DATATOGGLEM 0x03
-#define TD_CC_STALL 0x04
-#define TD_DEVNOTRESP 0x05
-#define TD_PIDCHECKFAIL 0x06
-#define TD_UNEXPECTEDPID 0x07
-#define TD_DATAOVERRUN 0x08
-#define TD_DATAUNDERRUN 0x09
- /* 0x0A, 0x0B reserved for hardware */
-#define TD_BUFFEROVERRUN 0x0C
-#define TD_BUFFERUNDERRUN 0x0D
- /* 0x0E, 0x0F reserved for HCD */
-#define TD_NOTACCESSED 0x0F
-
-/* ------------------------------------------------------------------------- */
-
-#define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */
-#define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE)
-
-/* Philips transfer descriptor */
-struct ptd {
- u16 count;
-#define PTD_COUNT_MSK (0x3ff << 0)
-#define PTD_TOGGLE_MSK (1 << 10)
-#define PTD_ACTIVE_MSK (1 << 11)
-#define PTD_CC_MSK (0xf << 12)
- u16 mps;
-#define PTD_MPS_MSK (0x3ff << 0)
-#define PTD_SPD_MSK (1 << 10)
-#define PTD_LAST_MSK (1 << 11)
-#define PTD_EP_MSK (0xf << 12)
- u16 len;
-#define PTD_LEN_MSK (0x3ff << 0)
-#define PTD_DIR_MSK (3 << 10)
-#define PTD_DIR_SETUP (0)
-#define PTD_DIR_OUT (1)
-#define PTD_DIR_IN (2)
-#define PTD_B5_5_MSK (1 << 13)
- u16 faddr;
-#define PTD_FA_MSK (0x7f << 0)
-#define PTD_FMT_MSK (1 << 7)
-} __attribute__ ((packed, aligned(2)));
-
-struct isp116x_ep {
- struct usb_device *udev;
- struct ptd ptd;
-
- u8 maxpacket;
- u8 epnum;
- u8 nextpid;
-
- u16 length; /* of current packet */
- unsigned char *data; /* to databuf */
-
- u16 error_count;
-};
-
-/* URB struct */
-#define N_URB_TD 48
-#define URB_DEL 1
-typedef struct {
- struct isp116x_ep *ed;
- void *transfer_buffer; /* (in) associated data buffer */
- int actual_length; /* (return) actual transfer length */
- unsigned long pipe; /* (in) pipe information */
-#if 0
- int state;
-#endif
-} urb_priv_t;
-
-struct isp116x_platform_data {
- /* Enable internal resistors on downstream ports */
- unsigned sel15Kres:1;
- /* On-chip overcurrent detection */
- unsigned oc_enable:1;
- /* Enable wakeup by devices on usb bus (e.g. wakeup
- by attachment/detachment or by device activity
- such as moving a mouse). When chosen, this option
- prevents stopping internal clock, increasing
- thereby power consumption in suspended state. */
- unsigned remote_wakeup_enable:1;
-};
-
-struct isp116x {
- u16 *addr_reg;
- u16 *data_reg;
-
- struct isp116x_platform_data *board;
-
- struct dentry *dentry;
- unsigned long stat1, stat2, stat4, stat8, stat16;
-
- /* Status flags */
- unsigned disabled:1;
- unsigned sleeping:1;
-
- /* Root hub registers */
- u32 rhdesca;
- u32 rhdescb;
- u32 rhstatus;
- u32 rhport[2];
-
- /* Schedule for the current frame */
- struct isp116x_ep *atl_active;
- int atl_buflen;
- int atl_bufshrt;
- int atl_last_dir;
- int atl_finishing;
-};
-
-/* ------------------------------------------------- */
-
-/* Inter-io delay (ns). The chip is picky about access timings; it
- * expects at least:
- * 150ns delay between consecutive accesses to DATA_REG,
- * 300ns delay between access to ADDR_REG and DATA_REG
- * OE, WE MUST NOT be changed during these intervals
- */
-#if defined(UDELAY)
-#define isp116x_delay(h,d) udelay(d)
-#else
-#define isp116x_delay(h,d) do {} while (0)
-#endif
-
-static inline void isp116x_write_addr(struct isp116x *isp116x, unsigned reg)
-{
- writew(reg & 0xff, isp116x->addr_reg);
- isp116x_delay(isp116x, UDELAY);
-}
-
-static inline void isp116x_write_data16(struct isp116x *isp116x, u16 val)
-{
- writew(val, isp116x->data_reg);
- isp116x_delay(isp116x, UDELAY);
-}
-
-static inline void isp116x_raw_write_data16(struct isp116x *isp116x, u16 val)
-{
- __raw_writew(val, isp116x->data_reg);
- isp116x_delay(isp116x, UDELAY);
-}
-
-static inline u16 isp116x_read_data16(struct isp116x *isp116x)
-{
- u16 val;
-
- val = readw(isp116x->data_reg);
- isp116x_delay(isp116x, UDELAY);
- return val;
-}
-
-static inline u16 isp116x_raw_read_data16(struct isp116x *isp116x)
-{
- u16 val;
-
- val = __raw_readw(isp116x->data_reg);
- isp116x_delay(isp116x, UDELAY);
- return val;
-}
-
-static inline void isp116x_write_data32(struct isp116x *isp116x, u32 val)
-{
- writew(val & 0xffff, isp116x->data_reg);
- isp116x_delay(isp116x, UDELAY);
- writew(val >> 16, isp116x->data_reg);
- isp116x_delay(isp116x, UDELAY);
-}
-
-static inline u32 isp116x_read_data32(struct isp116x *isp116x)
-{
- u32 val;
-
- val = (u32) readw(isp116x->data_reg);
- isp116x_delay(isp116x, UDELAY);
- val |= ((u32) readw(isp116x->data_reg)) << 16;
- isp116x_delay(isp116x, UDELAY);
- return val;
-}
-
-/* Let's keep register access functions out of line. Hint:
- we wait at least 150 ns at every access.
-*/
-static u16 isp116x_read_reg16(struct isp116x *isp116x, unsigned reg)
-{
- isp116x_write_addr(isp116x, reg);
- return isp116x_read_data16(isp116x);
-}
-
-static u32 isp116x_read_reg32(struct isp116x *isp116x, unsigned reg)
-{
- isp116x_write_addr(isp116x, reg);
- return isp116x_read_data32(isp116x);
-}
-
-static void isp116x_write_reg16(struct isp116x *isp116x, unsigned reg,
- unsigned val)
-{
- isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET);
- isp116x_write_data16(isp116x, (u16) (val & 0xffff));
-}
-
-static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg,
- unsigned val)
-{
- isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET);
- isp116x_write_data32(isp116x, (u32) val);
-}
-
-/* --- USB HUB constants (not OHCI-specific; see hub.h) -------------------- */
-
-/* destination of request */
-#define RH_INTERFACE 0x01
-#define RH_ENDPOINT 0x02
-#define RH_OTHER 0x03
-
-#define RH_CLASS 0x20
-#define RH_VENDOR 0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS 0x0080
-#define RH_CLEAR_FEATURE 0x0100
-#define RH_SET_FEATURE 0x0300
-#define RH_SET_ADDRESS 0x0500
-#define RH_GET_DESCRIPTOR 0x0680
-#define RH_SET_DESCRIPTOR 0x0700
-#define RH_GET_CONFIGURATION 0x0880
-#define RH_SET_CONFIGURATION 0x0900
-#define RH_GET_STATE 0x0280
-#define RH_GET_INTERFACE 0x0A80
-#define RH_SET_INTERFACE 0x0B00
-#define RH_SYNC_FRAME 0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP 0x2000
-
-/* Hub port features */
-#define RH_PORT_CONNECTION 0x00
-#define RH_PORT_ENABLE 0x01
-#define RH_PORT_SUSPEND 0x02
-#define RH_PORT_OVER_CURRENT 0x03
-#define RH_PORT_RESET 0x04
-#define RH_PORT_POWER 0x08
-#define RH_PORT_LOW_SPEED 0x09
-
-#define RH_C_PORT_CONNECTION 0x10
-#define RH_C_PORT_ENABLE 0x11
-#define RH_C_PORT_SUSPEND 0x12
-#define RH_C_PORT_OVER_CURRENT 0x13
-#define RH_C_PORT_RESET 0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER 0x00
-#define RH_C_HUB_OVER_CURRENT 0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL 0x01
-
-#define RH_ACK 0x01
-#define RH_REQ_ERR -1
-#define RH_NACK 0x00
+++ /dev/null
-#ifndef __UBOOT_SL811_H
-#define __UBOOT_SL811_H
-
-#undef SL811_DEBUG
-
-#ifdef SL811_DEBUG
- #define PDEBUG(level, fmt, args...) \
- if (debug >= (level)) printf("[%s:%d] " fmt, \
- __PRETTY_FUNCTION__, __LINE__ , ## args)
-#else
- #define PDEBUG(level, fmt, args...) do {} while(0)
-#endif
-
-/* Sl811 host control register */
-#define SL811_CTRL_A 0x00
-#define SL811_ADDR_A 0x01
-#define SL811_LEN_A 0x02
-#define SL811_STS_A 0x03 /* read */
-#define SL811_PIDEP_A 0x03 /* write */
-#define SL811_CNT_A 0x04 /* read */
-#define SL811_DEV_A 0x04 /* write */
-#define SL811_CTRL1 0x05
-#define SL811_INTR 0x06
-#define SL811_CTRL_B 0x08
-#define SL811_ADDR_B 0x09
-#define SL811_LEN_B 0x0A
-#define SL811_STS_B 0x0B /* read */
-#define SL811_PIDEP_B 0x0B /* write */
-#define SL811_CNT_B 0x0C /* read */
-#define SL811_DEV_B 0x0C /* write */
-#define SL811_INTRSTS 0x0D /* write clears bitwise */
-#define SL811_HWREV 0x0E /* read */
-#define SL811_SOFLOW 0x0E /* write */
-#define SL811_SOFCNTDIV 0x0F /* read */
-#define SL811_CTRL2 0x0F /* write */
-
-/* USB control register bits (addr 0x00 and addr 0x08) */
-#define SL811_USB_CTRL_ARM 0x01
-#define SL811_USB_CTRL_ENABLE 0x02
-#define SL811_USB_CTRL_DIR_OUT 0x04
-#define SL811_USB_CTRL_ISO 0x10
-#define SL811_USB_CTRL_SOF 0x20
-#define SL811_USB_CTRL_TOGGLE_1 0x40
-#define SL811_USB_CTRL_PREAMBLE 0x80
-
-/* USB status register bits (addr 0x03 and addr 0x0B) */
-#define SL811_USB_STS_ACK 0x01
-#define SL811_USB_STS_ERROR 0x02
-#define SL811_USB_STS_TIMEOUT 0x04
-#define SL811_USB_STS_TOGGLE_1 0x08
-#define SL811_USB_STS_SETUP 0x10
-#define SL811_USB_STS_OVERFLOW 0x20
-#define SL811_USB_STS_NAK 0x40
-#define SL811_USB_STS_STALL 0x80
-
-/* Control register 1 bits (addr 0x05) */
-#define SL811_CTRL1_SOF 0x01
-#define SL811_CTRL1_RESET 0x08
-#define SL811_CTRL1_JKSTATE 0x10
-#define SL811_CTRL1_SPEED_LOW 0x20
-#define SL811_CTRL1_SUSPEND 0x40
-
-/* Interrut enable (addr 0x06) and interrupt status register bits (addr 0x0D) */
-#define SL811_INTR_DONE_A 0x01
-#define SL811_INTR_DONE_B 0x02
-#define SL811_INTR_SOF 0x10
-#define SL811_INTR_INSRMV 0x20
-#define SL811_INTR_DETECT 0x40
-#define SL811_INTR_NOTPRESENT 0x40
-#define SL811_INTR_SPEED_FULL 0x80 /* only in status reg */
-
-/* HW rev and SOF lo register bits (addr 0x0E) */
-#define SL811_HWR_HWREV 0xF0
-
-/* SOF counter and control reg 2 (addr 0x0F) */
-#define SL811_CTL2_SOFHI 0x3F
-#define SL811_CTL2_DSWAP 0x40
-#define SL811_CTL2_HOST 0x80
-
-/* Set up for 1-ms SOF time. */
-#define SL811_12M_LOW 0xE0
-#define SL811_12M_HI 0x2E
-
-#define SL811_DATA_START 0x10
-#define SL811_DATA_LIMIT 240
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS 0x0080
-#define RH_CLEAR_FEATURE 0x0100
-#define RH_SET_FEATURE 0x0300
-#define RH_SET_ADDRESS 0x0500
-#define RH_GET_DESCRIPTOR 0x0680
-#define RH_SET_DESCRIPTOR 0x0700
-#define RH_GET_CONFIGURATION 0x0880
-#define RH_SET_CONFIGURATION 0x0900
-#define RH_GET_STATE 0x0280
-#define RH_GET_INTERFACE 0x0A80
-#define RH_SET_INTERFACE 0x0B00
-#define RH_SYNC_FRAME 0x0C80
-
-
-#define PIDEP(pid, ep) (((pid) & 0x0f) << 4 | (ep))
-
-#endif /* __UBOOT_SL811_H */
+++ /dev/null
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This code is based on linux driver for sl811hs chip, source at
- * drivers/usb/host/sl811.c:
- *
- * SL811 Host Controller Interface driver for USB.
- *
- * Copyright (c) 2003/06, Courage Co., Ltd.
- *
- * Based on:
- * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap,
- * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber,
- * Adam Richter, Gregory P. Smith;
- * 2.Original SL811 driver (hc_sl811.o) by Pei Liu <pbl@cypress.com>
- * 3.Rewrited as sl811.o by Yin Aihua <yinah:couragetech.com.cn>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#ifdef CONFIG_USB_SL811HS
-#include <mpc8xx.h>
-#include <usb.h>
-#include "sl811.h"
-
-#include "../board/kup/common/kup.h"
-
-#ifdef __PPC__
-# define EIEIO __asm__ volatile ("eieio")
-#else
-# define EIEIO /* nothing */
-#endif
-
-#define SL811_ADR (0x50000000)
-#define SL811_DAT (0x50000001)
-
-#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
-
-#ifdef SL811_DEBUG
-static int debug = 9;
-#endif
-
-static int root_hub_devnum = 0;
-static struct usb_port_status rh_status = { 0 };/* root hub port status */
-
-static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
- void *data, int buf_len, struct devrequest *cmd);
-
-static void sl811_write (__u8 index, __u8 data)
-{
- *(volatile unsigned char *) (SL811_ADR) = index;
- EIEIO;
- *(volatile unsigned char *) (SL811_DAT) = data;
- EIEIO;
-}
-
-static __u8 sl811_read (__u8 index)
-{
- __u8 data;
-
- *(volatile unsigned char *) (SL811_ADR) = index;
- EIEIO;
- data = *(volatile unsigned char *) (SL811_DAT);
- EIEIO;
- return (data);
-}
-
-/*
- * Read consecutive bytes of data from the SL811H/SL11H buffer
- */
-static void inline sl811_read_buf(__u8 offset, __u8 *buf, __u8 size)
-{
- *(volatile unsigned char *) (SL811_ADR) = offset;
- EIEIO;
- while (size--) {
- *buf++ = *(volatile unsigned char *) (SL811_DAT);
- EIEIO;
- }
-}
-
-/*
- * Write consecutive bytes of data to the SL811H/SL11H buffer
- */
-static void inline sl811_write_buf(__u8 offset, __u8 *buf, __u8 size)
-{
- *(volatile unsigned char *) (SL811_ADR) = offset;
- EIEIO;
- while (size--) {
- *(volatile unsigned char *) (SL811_DAT) = *buf++;
- EIEIO;
- }
-}
-
-int usb_init_kup4x (void)
-{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- int i;
- unsigned char tmp;
-
- memctl = &immap->im_memctl;
- memctl->memc_or7 = 0xFFFF8726;
- memctl->memc_br7 = 0x50000401; /* start at 0x50000000 */
- /* BP 14 low = USB ON */
- immap->im_cpm.cp_pbdat &= ~(BP_USB_VCC);
- /* PB 14 nomal port */
- immap->im_cpm.cp_pbpar &= ~(BP_USB_VCC);
- /* output */
- immap->im_cpm.cp_pbdir |= (BP_USB_VCC);
-
- puts ("USB: ");
-
- for (i = 0x10; i < 0xff; i++) {
- sl811_write(i, i);
- tmp = (sl811_read(i));
- if (tmp != i) {
- printf ("SL811 compare error index=0x%02x read=0x%02x\n", i, tmp);
- return (-1);
- }
- }
- printf ("SL811 ready\n");
- return (0);
-}
-
-/*
- * This function resets SL811HS controller and detects the speed of
- * the connecting device
- *
- * Return: 0 = no device attached; 1 = USB device attached
- */
-static int sl811_hc_reset(void)
-{
- int status ;
-
- sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI);
- sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
-
- mdelay(20);
-
- /* Disable hardware SOF generation, clear all irq status. */
- sl811_write(SL811_CTRL1, 0);
- mdelay(2);
- sl811_write(SL811_INTRSTS, 0xff);
- status = sl811_read(SL811_INTRSTS);
-
- if (status & SL811_INTR_NOTPRESENT) {
- /* Device is not present */
- PDEBUG(0, "Device not present\n");
- rh_status.wPortStatus &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE);
- rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION;
- sl811_write(SL811_INTR, SL811_INTR_INSRMV);
- return 0;
- }
-
- /* Send SOF to address 0, endpoint 0. */
- sl811_write(SL811_LEN_B, 0);
- sl811_write(SL811_PIDEP_B, PIDEP(USB_PID_SOF, 0));
- sl811_write(SL811_DEV_B, 0x00);
- sl811_write(SL811_SOFLOW, SL811_12M_LOW);
-
- if (status & SL811_INTR_SPEED_FULL) {
- /* full speed device connect directly to root hub */
- PDEBUG (0, "Full speed Device attached\n");
-
- sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
- mdelay(20);
- sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI);
- sl811_write(SL811_CTRL1, SL811_CTRL1_SOF);
-
- /* start the SOF or EOP */
- sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM);
- rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION;
- rh_status.wPortStatus &= ~USB_PORT_STAT_LOW_SPEED;
- mdelay(2);
- sl811_write(SL811_INTRSTS, 0xff);
- } else {
- /* slow speed device connect directly to root-hub */
- PDEBUG(0, "Low speed Device attached\n");
-
- sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
- mdelay(20);
- sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_CTL2_DSWAP | SL811_12M_HI);
- sl811_write(SL811_CTRL1, SL811_CTRL1_SPEED_LOW | SL811_CTRL1_SOF);
-
- /* start the SOF or EOP */
- sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM);
- rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION | USB_PORT_STAT_LOW_SPEED;
- mdelay(2);
- sl811_write(SL811_INTRSTS, 0xff);
- }
-
- rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION;
- sl811_write(SL811_INTR, /*SL811_INTR_INSRMV*/SL811_INTR_DONE_A);
-
- return 1;
-}
-
-int usb_lowlevel_init(void)
-{
- root_hub_devnum = 0;
- sl811_hc_reset();
- return 0;
-}
-
-int usb_lowlevel_stop(void)
-{
- sl811_hc_reset();
- return 0;
-}
-
-static int calc_needed_buswidth(int bytes, int need_preamble)
-{
- return !need_preamble ? bytes * 8 + 256 : 8 * 8 * bytes + 2048;
-}
-
-static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *buffer, int len)
-{
- __u8 ctrl = SL811_USB_CTRL_ARM | SL811_USB_CTRL_ENABLE;
- __u16 status = 0;
- int err = 0, time_start = get_timer(0);
- int need_preamble = !(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) &&
- usb_pipeslow(pipe);
-
- if (len > 239)
- return -1;
-
- if (usb_pipeout(pipe))
- ctrl |= SL811_USB_CTRL_DIR_OUT;
- if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)))
- ctrl |= SL811_USB_CTRL_TOGGLE_1;
- if (need_preamble)
- ctrl |= SL811_USB_CTRL_PREAMBLE;
-
- sl811_write(SL811_INTRSTS, 0xff);
-
- while (err < 3) {
- sl811_write(SL811_ADDR_A, 0x10);
- sl811_write(SL811_LEN_A, len);
- if (usb_pipeout(pipe) && len)
- sl811_write_buf(0x10, buffer, len);
-
- if (!(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) &&
- sl811_read(SL811_SOFCNTDIV)*64 < calc_needed_buswidth(len, need_preamble))
- ctrl |= SL811_USB_CTRL_SOF;
- else
- ctrl &= ~SL811_USB_CTRL_SOF;
-
- sl811_write(SL811_CTRL_A, ctrl);
- while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) {
- if (5*CFG_HZ < get_timer(time_start)) {
- printf("USB transmit timed out\n");
- return -USB_ST_CRC_ERR;
- }
- }
-
- sl811_write(SL811_INTRSTS, 0xff);
- status = sl811_read(SL811_STS_A);
-
- if (status & SL811_USB_STS_ACK) {
- int remainder = sl811_read(SL811_CNT_A);
- if (remainder) {
- PDEBUG(0, "usb transfer remainder = %d\n", remainder);
- len -= remainder;
- }
- if (usb_pipein(pipe) && len)
- sl811_read_buf(0x10, buffer, len);
- return len;
- }
-
- if ((status & SL811_USB_STS_NAK) == SL811_USB_STS_NAK)
- continue;
-
- PDEBUG(0, "usb transfer error %#x\n", (int)status);
- err++;
- }
-
- err = 0;
-
- if (status & SL811_USB_STS_ERROR)
- err |= USB_ST_BUF_ERR;
- if (status & SL811_USB_STS_TIMEOUT)
- err |= USB_ST_CRC_ERR;
- if (status & SL811_USB_STS_STALL)
- err |= USB_ST_STALLED;
-
- return -err;
-}
-
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int len)
-{
- int dir_out = usb_pipeout(pipe);
- int ep = usb_pipeendpoint(pipe);
- int max = usb_maxpacket(dev, pipe);
- int done = 0;
-
- PDEBUG(7, "dev = %ld pipe = %ld buf = %p size = %d dir_out = %d\n",
- usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out);
-
- dev->status = 0;
-
- sl811_write(SL811_DEV_A, usb_pipedevice(pipe));
- sl811_write(SL811_PIDEP_A, PIDEP(!dir_out ? USB_PID_IN : USB_PID_OUT, ep));
- while (done < len) {
- int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done,
- max > len - done ? len - done : max);
- if (res < 0) {
- dev->status = -res;
- return res;
- }
-
- if (!dir_out && res < max) /* short packet */
- break;
-
- done += res;
- usb_dotoggle(dev, ep, dir_out);
- }
-
- dev->act_len = done;
-
- return 0;
-}
-
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int len,struct devrequest *setup)
-{
- int done = 0;
- int devnum = usb_pipedevice(pipe);
- int ep = usb_pipeendpoint(pipe);
-
- dev->status = 0;
-
- if (devnum == root_hub_devnum)
- return sl811_rh_submit_urb(dev, pipe, buffer, len, setup);
-
- PDEBUG(7, "dev = %d pipe = %ld buf = %p size = %d rt = %#x req = %#x bus = %i\n",
- devnum, ep, buffer, len, (int)setup->requesttype,
- (int)setup->request, sl811_read(SL811_SOFCNTDIV)*64);
-
- sl811_write(SL811_DEV_A, devnum);
- sl811_write(SL811_PIDEP_A, PIDEP(USB_PID_SETUP, ep));
- /* setup phase */
- usb_settoggle(dev, ep, 1, 0);
- if (sl811_send_packet(dev, usb_sndctrlpipe(dev, ep),
- (__u8*)setup, sizeof(*setup)) == sizeof(*setup)) {
- int dir_in = usb_pipein(pipe);
- int max = usb_maxpacket(dev, pipe);
-
- /* data phase */
- sl811_write(SL811_PIDEP_A,
- PIDEP(dir_in ? USB_PID_IN : USB_PID_OUT, ep));
- usb_settoggle(dev, ep, usb_pipeout(pipe), 1);
- while (done < len) {
- int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done,
- max > len - done ? len - done : max);
- if (res < 0) {
- PDEBUG(0, "status data failed!\n");
- dev->status = -res;
- return 0;
- }
- done += res;
- usb_dotoggle(dev, ep, usb_pipeout(pipe));
- if (dir_in && res < max) /* short packet */
- break;
- }
-
- /* status phase */
- sl811_write(SL811_PIDEP_A,
- PIDEP(!dir_in ? USB_PID_IN : USB_PID_OUT, ep));
- usb_settoggle(dev, ep, !usb_pipeout(pipe), 1);
- if (sl811_send_packet(dev,
- !dir_in ? usb_rcvctrlpipe(dev, ep) :
- usb_sndctrlpipe(dev, ep),
- 0, 0) < 0) {
- PDEBUG(0, "status phase failed!\n");
- dev->status = -1;
- }
- } else {
- PDEBUG(0, "setup phase failed!\n");
- dev->status = -1;
- }
-
- dev->act_len = done;
-
- return done;
-}
-
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int len, int interval)
-{
- PDEBUG(0, "dev = %p pipe = %#lx buf = %p size = %d int = %d\n", dev, pipe,
- buffer, len, interval);
- return -1;
-}
-
-/*
- * SL811 Virtual Root Hub
- */
-
-/* Device descriptor */
-static __u8 sl811_rh_dev_des[] =
-{
- 0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
- 0x10, /* __u16 bcdUSB; v1.1 */
- 0x01,
- 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
- 0x00, /* __u8 bDeviceSubClass; */
- 0x00, /* __u8 bDeviceProtocol; */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
- 0x00, /* __u16 idVendor; */
- 0x00,
- 0x00, /* __u16 idProduct; */
- 0x00,
- 0x00, /* __u16 bcdDevice; */
- 0x00,
- 0x00, /* __u8 iManufacturer; */
- 0x02, /* __u8 iProduct; */
- 0x01, /* __u8 iSerialNumber; */
- 0x01 /* __u8 bNumConfigurations; */
-};
-
-/* Configuration descriptor */
-static __u8 sl811_rh_config_des[] =
-{
- 0x09, /* __u8 bLength; */
- 0x02, /* __u8 bDescriptorType; Configuration */
- 0x19, /* __u16 wTotalLength; */
- 0x00,
- 0x01, /* __u8 bNumInterfaces; */
- 0x01, /* __u8 bConfigurationValue; */
- 0x00, /* __u8 iConfiguration; */
- 0x40, /* __u8 bmAttributes;
- Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup,
- 4..0: resvd */
- 0x00, /* __u8 MaxPower; */
-
- /* interface */
- 0x09, /* __u8 if_bLength; */
- 0x04, /* __u8 if_bDescriptorType; Interface */
- 0x00, /* __u8 if_bInterfaceNumber; */
- 0x00, /* __u8 if_bAlternateSetting; */
- 0x01, /* __u8 if_bNumEndpoints; */
- 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
- 0x00, /* __u8 if_bInterfaceSubClass; */
- 0x00, /* __u8 if_bInterfaceProtocol; */
- 0x00, /* __u8 if_iInterface; */
-
- /* endpoint */
- 0x07, /* __u8 ep_bLength; */
- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
- 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x08, /* __u16 ep_wMaxPacketSize; */
- 0x00,
- 0xff /* __u8 ep_bInterval; 255 ms */
-};
-
-/* root hub class descriptor*/
-static __u8 sl811_rh_hub_des[] =
-{
- 0x09, /* __u8 bLength; */
- 0x29, /* __u8 bDescriptorType; Hub-descriptor */
- 0x01, /* __u8 bNbrPorts; */
- 0x00, /* __u16 wHubCharacteristics; */
- 0x00,
- 0x50, /* __u8 bPwrOn2pwrGood; 2ms */
- 0x00, /* __u8 bHubContrCurrent; 0 mA */
- 0xfc, /* __u8 DeviceRemovable; *** 7 Ports max *** */
- 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */
-};
-
-/*
- * helper routine for returning string descriptors in UTF-16LE
- * input can actually be ISO-8859-1; ASCII is its 7-bit subset
- */
-static int ascii2utf (char *s, u8 *utf, int utfmax)
-{
- int retval;
-
- for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) {
- *utf++ = *s++;
- *utf++ = 0;
- }
- return retval;
-}
-
-/*
- * root_hub_string is used by each host controller's root hub code,
- * so that they're identified consistently throughout the system.
- */
-static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len)
-{
- char buf [30];
-
- /* assert (len > (2 * (sizeof (buf) + 1)));
- assert (strlen (type) <= 8);*/
-
- /* language ids */
- if (id == 0) {
- *data++ = 4; *data++ = 3; /* 4 bytes data */
- *data++ = 0; *data++ = 0; /* some language id */
- return 4;
-
- /* serial number */
- } else if (id == 1) {
- sprintf (buf, "%#x", serial);
-
- /* product description */
- } else if (id == 2) {
- sprintf (buf, "USB %s Root Hub", type);
-
- /* id 3 == vendor description */
-
- /* unsupported IDs --> "stall" */
- } else
- return 0;
-
- ascii2utf (buf, data + 2, len - 2);
- data [0] = 2 + strlen(buf) * 2;
- data [1] = 3;
- return data [0];
-}
-
-/* helper macro */
-#define OK(x) len = (x); break
-
-/*
- * This function handles all USB request to the the virtual root hub
- */
-static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
- void *data, int buf_len, struct devrequest *cmd)
-{
- __u8 data_buf[16];
- __u8 *bufp = data_buf;
- int len = 0;
- int status = 0;
-
- __u16 bmRType_bReq;
- __u16 wValue;
- __u16 wIndex;
- __u16 wLength;
-
- if (usb_pipeint(pipe)) {
- PDEBUG(0, "interrupt transfer unimplemented!\n");
- return 0;
- }
-
- bmRType_bReq = cmd->requesttype | (cmd->request << 8);
- wValue = le16_to_cpu (cmd->value);
- wIndex = le16_to_cpu (cmd->index);
- wLength = le16_to_cpu (cmd->length);
-
- PDEBUG(5, "submit rh urb, req = %d(%x) val = %#x index = %#x len=%d\n",
- bmRType_bReq, bmRType_bReq, wValue, wIndex, wLength);
-
- /* Request Destination:
- without flags: Device,
- USB_RECIP_INTERFACE: interface,
- USB_RECIP_ENDPOINT: endpoint,
- USB_TYPE_CLASS means HUB here,
- USB_RECIP_OTHER | USB_TYPE_CLASS almost ever means HUB_PORT here
- */
- switch (bmRType_bReq) {
- case RH_GET_STATUS:
- *(__u16 *)bufp = cpu_to_le16(1);
- OK(2);
-
- case RH_GET_STATUS | USB_RECIP_INTERFACE:
- *(__u16 *)bufp = cpu_to_le16(0);
- OK(2);
-
- case RH_GET_STATUS | USB_RECIP_ENDPOINT:
- *(__u16 *)bufp = cpu_to_le16(0);
- OK(2);
-
- case RH_GET_STATUS | USB_TYPE_CLASS:
- *(__u32 *)bufp = cpu_to_le32(0);
- OK(4);
-
- case RH_GET_STATUS | USB_RECIP_OTHER | USB_TYPE_CLASS:
- *(__u32 *)bufp = cpu_to_le32(rh_status.wPortChange<<16 | rh_status.wPortStatus);
- OK(4);
-
- case RH_CLEAR_FEATURE | USB_RECIP_ENDPOINT:
- switch (wValue) {
- case 1:
- OK(0);
- }
- break;
-
- case RH_CLEAR_FEATURE | USB_TYPE_CLASS:
- switch (wValue) {
- case C_HUB_LOCAL_POWER:
- OK(0);
-
- case C_HUB_OVER_CURRENT:
- OK(0);
- }
- break;
-
- case RH_CLEAR_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS:
- switch (wValue) {
- case USB_PORT_FEAT_ENABLE:
- rh_status.wPortStatus &= ~USB_PORT_STAT_ENABLE;
- OK(0);
-
- case USB_PORT_FEAT_SUSPEND:
- rh_status.wPortStatus &= ~USB_PORT_STAT_SUSPEND;
- OK(0);
-
- case USB_PORT_FEAT_POWER:
- rh_status.wPortStatus &= ~USB_PORT_STAT_POWER;
- OK(0);
-
- case USB_PORT_FEAT_C_CONNECTION:
- rh_status.wPortChange &= ~USB_PORT_STAT_C_CONNECTION;
- OK(0);
-
- case USB_PORT_FEAT_C_ENABLE:
- rh_status.wPortChange &= ~USB_PORT_STAT_C_ENABLE;
- OK(0);
-
- case USB_PORT_FEAT_C_SUSPEND:
- rh_status.wPortChange &= ~USB_PORT_STAT_C_SUSPEND;
- OK(0);
-
- case USB_PORT_FEAT_C_OVER_CURRENT:
- rh_status.wPortChange &= ~USB_PORT_STAT_C_OVERCURRENT;
- OK(0);
-
- case USB_PORT_FEAT_C_RESET:
- rh_status.wPortChange &= ~USB_PORT_STAT_C_RESET;
- OK(0);
- }
- break;
-
- case RH_SET_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS:
- switch (wValue) {
- case USB_PORT_FEAT_SUSPEND:
- rh_status.wPortStatus |= USB_PORT_STAT_SUSPEND;
- OK(0);
-
- case USB_PORT_FEAT_RESET:
- rh_status.wPortStatus |= USB_PORT_STAT_RESET;
- rh_status.wPortChange = 0;
- rh_status.wPortChange |= USB_PORT_STAT_C_RESET;
- rh_status.wPortStatus &= ~USB_PORT_STAT_RESET;
- rh_status.wPortStatus |= USB_PORT_STAT_ENABLE;
- OK(0);
-
- case USB_PORT_FEAT_POWER:
- rh_status.wPortStatus |= USB_PORT_STAT_POWER;
- OK(0);
-
- case USB_PORT_FEAT_ENABLE:
- rh_status.wPortStatus |= USB_PORT_STAT_ENABLE;
- OK(0);
- }
- break;
-
- case RH_SET_ADDRESS:
- root_hub_devnum = wValue;
- OK(0);
-
- case RH_GET_DESCRIPTOR:
- switch ((wValue & 0xff00) >> 8) {
- case USB_DT_DEVICE:
- len = sizeof(sl811_rh_dev_des);
- bufp = sl811_rh_dev_des;
- OK(len);
-
- case USB_DT_CONFIG:
- len = sizeof(sl811_rh_config_des);
- bufp = sl811_rh_config_des;
- OK(len);
-
- case USB_DT_STRING:
- len = usb_root_hub_string(wValue & 0xff, (int)(long)0, "SL811HS", data, wLength);
- if (len > 0) {
- bufp = data;
- OK(len);
- }
-
- default:
- status = -32;
- }
- break;
-
- case RH_GET_DESCRIPTOR | USB_TYPE_CLASS:
- len = sizeof(sl811_rh_hub_des);
- bufp = sl811_rh_hub_des;
- OK(len);
-
- case RH_GET_CONFIGURATION:
- bufp[0] = 0x01;
- OK(1);
-
- case RH_SET_CONFIGURATION:
- OK(0);
-
- default:
- PDEBUG(1, "unsupported root hub command\n");
- status = -32;
- }
-
- len = min(len, buf_len);
- if (data != bufp)
- memcpy(data, bufp, len);
-
- PDEBUG(5, "len = %d, status = %d\n", len, status);
-
- usb_dev->status = status;
- usb_dev->act_len = len;
-
- return status == 0 ? len : status;
-}
-
-#endif /* CONFIG_USB_SL811HS */
--- /dev/null
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)libusb.a
+
+COBJS-y += isp116x-hcd.o
+COBJS-y += sl811_usb.o
+COBJS-y += usb_ohci.o
+COBJS-y += usbdcore.o
+COBJS-y += usbdcore_ep0.o
+COBJS-y += usbdcore_mpc8xx.o
+COBJS-y += usbdcore_omap1510.o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * ISP116x HCD (Host Controller Driver) for u-boot.
+ *
+ * Copyright (C) 2006-2007 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (C) 2006-2007 Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * Derived in part from the SL811 HCD driver "u-boot/drivers/sl811_usb.c"
+ * (original copyright message follows):
+ *
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This code is based on linux driver for sl811hs chip, source at
+ * drivers/usb/host/sl811.c:
+ *
+ * SL811 Host Controller Interface driver for USB.
+ *
+ * Copyright (c) 2003/06, Courage Co., Ltd.
+ *
+ * Based on:
+ * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap,
+ * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber,
+ * Adam Richter, Gregory P. Smith;
+ * 2.Original SL811 driver (hc_sl811.o) by Pei Liu <pbl@cypress.com>
+ * 3.Rewrited as sl811.o by Yin Aihua <yinah:couragetech.com.cn>
+ *
+ * [[GNU/GPL disclaimer]]
+ *
+ * and in part from AU1x00 OHCI HCD driver "u-boot/cpu/mips/au1x00_usb_ohci.c"
+ * (original copyright message follows):
+ *
+ * URB OHCI HCD (Host Controller Driver) for USB on the AU1x00.
+ *
+ * (C) Copyright 2003
+ * Gary Jennejohn, DENX Software Engineering <gj@denx.de>
+ *
+ * [[GNU/GPL disclaimer]]
+ *
+ * Note: Part of this code has been derived from linux
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_USB_ISP116X_HCD
+#include <asm/io.h>
+#include <usb.h>
+#include <malloc.h>
+#include <linux/list.h>
+
+/*
+ * ISP116x chips require certain delays between accesses to its
+ * registers. The following timing options exist.
+ *
+ * 1. Configure your memory controller (the best)
+ * 2. Use ndelay (easiest, poorest). For that, enable the following macro.
+ *
+ * Value is in microseconds.
+ */
+#ifdef ISP116X_HCD_USE_UDELAY
+#define UDELAY 1
+#endif
+
+/*
+ * On some (slowly?) machines an extra delay after data packing into
+ * controller's FIFOs is required, * otherwise you may get the following
+ * error:
+ *
+ * uboot> usb start
+ * (Re)start USB...
+ * USB: scanning bus for devices... isp116x: isp116x_submit_job: CTL:TIMEOUT
+ * isp116x: isp116x_submit_job: ****** FIFO not ready! ******
+ *
+ * USB device not responding, giving up (status=4)
+ * isp116x: isp116x_submit_job: ****** FIFO not empty! ******
+ * isp116x: isp116x_submit_job: ****** FIFO not empty! ******
+ * isp116x: isp116x_submit_job: ****** FIFO not empty! ******
+ * 3 USB Device(s) found
+ * scanning bus for storage devices... 0 Storage Device(s) found
+ *
+ * Value is in milliseconds.
+ */
+#ifdef ISP116X_HCD_USE_EXTRA_DELAY
+#define EXTRA_DELAY 2
+#endif
+
+/*
+ * Enable the following defines if you wish enable debugging messages.
+ */
+#undef DEBUG /* enable debugging messages */
+#undef TRACE /* enable tracing code */
+#undef VERBOSE /* verbose debugging messages */
+
+#include "isp116x.h"
+
+#define DRIVER_VERSION "08 Jan 2007"
+static const char hcd_name[] = "isp116x-hcd";
+
+struct isp116x isp116x_dev;
+struct isp116x_platform_data isp116x_board;
+static int got_rhsc; /* root hub status change */
+struct usb_device *devgone; /* device which was disconnected */
+static int rh_devnum; /* address of Root Hub endpoint */
+
+/* ------------------------------------------------------------------------- */
+
+#define ALIGN(x,a) (((x)+(a)-1UL)&~((a)-1UL))
+#define min_t(type,x,y) \
+ ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
+
+/* ------------------------------------------------------------------------- */
+
+static int isp116x_reset(struct isp116x *isp116x);
+
+/* --- Debugging functions ------------------------------------------------- */
+
+#define isp116x_show_reg(d, r) { \
+ if ((r) < 0x20) { \
+ DBG("%-12s[%02x]: %08x", #r, \
+ r, isp116x_read_reg32(d, r)); \
+ } else { \
+ DBG("%-12s[%02x]: %04x", #r, \
+ r, isp116x_read_reg16(d, r)); \
+ } \
+}
+
+#define isp116x_show_regs(d) { \
+ isp116x_show_reg(d, HCREVISION); \
+ isp116x_show_reg(d, HCCONTROL); \
+ isp116x_show_reg(d, HCCMDSTAT); \
+ isp116x_show_reg(d, HCINTSTAT); \
+ isp116x_show_reg(d, HCINTENB); \
+ isp116x_show_reg(d, HCFMINTVL); \
+ isp116x_show_reg(d, HCFMREM); \
+ isp116x_show_reg(d, HCFMNUM); \
+ isp116x_show_reg(d, HCLSTHRESH); \
+ isp116x_show_reg(d, HCRHDESCA); \
+ isp116x_show_reg(d, HCRHDESCB); \
+ isp116x_show_reg(d, HCRHSTATUS); \
+ isp116x_show_reg(d, HCRHPORT1); \
+ isp116x_show_reg(d, HCRHPORT2); \
+ isp116x_show_reg(d, HCHWCFG); \
+ isp116x_show_reg(d, HCDMACFG); \
+ isp116x_show_reg(d, HCXFERCTR); \
+ isp116x_show_reg(d, HCuPINT); \
+ isp116x_show_reg(d, HCuPINTENB); \
+ isp116x_show_reg(d, HCCHIPID); \
+ isp116x_show_reg(d, HCSCRATCH); \
+ isp116x_show_reg(d, HCITLBUFLEN); \
+ isp116x_show_reg(d, HCATLBUFLEN); \
+ isp116x_show_reg(d, HCBUFSTAT); \
+ isp116x_show_reg(d, HCRDITL0LEN); \
+ isp116x_show_reg(d, HCRDITL1LEN); \
+}
+
+#if defined(TRACE)
+
+static int isp116x_get_current_frame_number(struct usb_device *usb_dev)
+{
+ struct isp116x *isp116x = &isp116x_dev;
+
+ return isp116x_read_reg32(isp116x, HCFMNUM);
+}
+
+static void dump_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len, char *str)
+{
+#if defined(VERBOSE)
+ int i;
+#endif
+
+ DBG("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d stat:%#lx",
+ str,
+ isp116x_get_current_frame_number(dev),
+ usb_pipedevice(pipe),
+ usb_pipeendpoint(pipe),
+ usb_pipeout(pipe) ? 'O' : 'I',
+ usb_pipetype(pipe) < 2 ?
+ (usb_pipeint(pipe) ?
+ "INTR" : "ISOC") :
+ (usb_pipecontrol(pipe) ? "CTRL" : "BULK"), len, dev->status);
+#if defined(VERBOSE)
+ if (len > 0 && buffer) {
+ printf(__FILE__ ": data(%d):", len);
+ for (i = 0; i < 16 && i < len; i++)
+ printf(" %02x", ((__u8 *) buffer)[i]);
+ printf("%s\n", i < len ? "..." : "");
+ }
+#endif
+}
+
+#define PTD_DIR_STR(ptd) ({char __c; \
+ switch(PTD_GET_DIR(ptd)){ \
+ case 0: __c = 's'; break; \
+ case 1: __c = 'o'; break; \
+ default: __c = 'i'; break; \
+ }; __c;})
+
+/*
+ Dump PTD info. The code documents the format
+ perfectly, right :)
+*/
+static inline void dump_ptd(struct ptd *ptd)
+{
+#if defined(VERBOSE)
+ int k;
+#endif
+
+ DBG("PTD(ext) : cc:%x %d%c%d %d,%d,%d t:%x %x%x%x",
+ PTD_GET_CC(ptd),
+ PTD_GET_FA(ptd), PTD_DIR_STR(ptd), PTD_GET_EP(ptd),
+ PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd),
+ PTD_GET_TOGGLE(ptd),
+ PTD_GET_ACTIVE(ptd), PTD_GET_SPD(ptd), PTD_GET_LAST(ptd));
+#if defined(VERBOSE)
+ printf("isp116x: %s: PTD(byte): ", __FUNCTION__);
+ for (k = 0; k < sizeof(struct ptd); ++k)
+ printf("%02x ", ((u8 *) ptd)[k]);
+ printf("\n");
+#endif
+}
+
+static inline void dump_ptd_data(struct ptd *ptd, u8 * buf, int type)
+{
+#if defined(VERBOSE)
+ int k;
+
+ if (type == 0 /* 0ut data */ ) {
+ printf("isp116x: %s: out data: ", __FUNCTION__);
+ for (k = 0; k < PTD_GET_LEN(ptd); ++k)
+ printf("%02x ", ((u8 *) buf)[k]);
+ printf("\n");
+ }
+ if (type == 1 /* 1n data */ ) {
+ printf("isp116x: %s: in data: ", __FUNCTION__);
+ for (k = 0; k < PTD_GET_COUNT(ptd); ++k)
+ printf("%02x ", ((u8 *) buf)[k]);
+ printf("\n");
+ }
+
+ if (PTD_GET_LAST(ptd))
+ DBG("--- last PTD ---");
+#endif
+}
+
+#else
+
+#define dump_msg(dev, pipe, buffer, len, str) do { } while (0)
+#define dump_pkt(dev, pipe, buffer, len, setup, str, small) do {} while (0)
+
+#define dump_ptd(ptd) do {} while (0)
+#define dump_ptd_data(ptd, buf, type) do {} while (0)
+
+#endif
+
+/* --- Virtual Root Hub ---------------------------------------------------- */
+
+/* Device descriptor */
+static __u8 root_hub_dev_des[] = {
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x10, /* __u16 bcdUSB; v1.1 */
+ 0x01,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x00, /* __u8 iManufacturer; */
+ 0x01, /* __u8 iProduct; */
+ 0x00, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+/* Configuration descriptor */
+static __u8 root_hub_config_des[] = {
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes;
+ Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x00, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+ 0x02,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+static unsigned char root_hub_str_index0[] = {
+ 0x04, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 0x09, /* __u8 lang ID */
+ 0x04, /* __u8 lang ID */
+};
+
+static unsigned char root_hub_str_index1[] = {
+ 0x22, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 'I', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'S', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'P', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ '1', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ '1', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ '6', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'x', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'R', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 't', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'u', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'b', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+};
+
+/*
+ * Hub class-specific descriptor is constructed dynamically
+ */
+
+/* --- Virtual root hub management functions ------------------------------- */
+
+static int rh_check_port_status(struct isp116x *isp116x)
+{
+ u32 temp, ndp, i;
+ int res;
+
+ res = -1;
+ temp = isp116x_read_reg32(isp116x, HCRHSTATUS);
+ ndp = (temp & RH_A_NDP);
+ for (i = 0; i < ndp; i++) {
+ temp = isp116x_read_reg32(isp116x, HCRHPORT1 + i);
+ /* check for a device disconnect */
+ if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
+ (RH_PS_PESC | RH_PS_CSC)) && ((temp & RH_PS_CCS) == 0)) {
+ res = i;
+ break;
+ }
+ }
+ return res;
+}
+
+/* --- HC management functions --------------------------------------------- */
+
+/* Write len bytes to fifo, pad till 32-bit boundary
+ */
+static void write_ptddata_to_fifo(struct isp116x *isp116x, void *buf, int len)
+{
+ u8 *dp = (u8 *) buf;
+ u16 *dp2 = (u16 *) buf;
+ u16 w;
+ int quot = len % 4;
+
+ if ((unsigned long)dp2 & 1) {
+ /* not aligned */
+ for (; len > 1; len -= 2) {
+ w = *dp++;
+ w |= *dp++ << 8;
+ isp116x_raw_write_data16(isp116x, w);
+ }
+ if (len)
+ isp116x_write_data16(isp116x, (u16) * dp);
+ } else {
+ /* aligned */
+ for (; len > 1; len -= 2)
+ isp116x_raw_write_data16(isp116x, *dp2++);
+ if (len)
+ isp116x_write_data16(isp116x, 0xff & *((u8 *) dp2));
+ }
+ if (quot == 1 || quot == 2)
+ isp116x_raw_write_data16(isp116x, 0);
+}
+
+/* Read len bytes from fifo and then read till 32-bit boundary
+ */
+static void read_ptddata_from_fifo(struct isp116x *isp116x, void *buf, int len)
+{
+ u8 *dp = (u8 *) buf;
+ u16 *dp2 = (u16 *) buf;
+ u16 w;
+ int quot = len % 4;
+
+ if ((unsigned long)dp2 & 1) {
+ /* not aligned */
+ for (; len > 1; len -= 2) {
+ w = isp116x_raw_read_data16(isp116x);
+ *dp++ = w & 0xff;
+ *dp++ = (w >> 8) & 0xff;
+ }
+ if (len)
+ *dp = 0xff & isp116x_read_data16(isp116x);
+ } else {
+ /* aligned */
+ for (; len > 1; len -= 2)
+ *dp2++ = isp116x_raw_read_data16(isp116x);
+ if (len)
+ *(u8 *) dp2 = 0xff & isp116x_read_data16(isp116x);
+ }
+ if (quot == 1 || quot == 2)
+ isp116x_raw_read_data16(isp116x);
+}
+
+/* Write PTD's and data for scheduled transfers into the fifo ram.
+ * Fifo must be empty and ready */
+static void pack_fifo(struct isp116x *isp116x, struct usb_device *dev,
+ unsigned long pipe, struct ptd *ptd, int n, void *data,
+ int len)
+{
+ int buflen = n * sizeof(struct ptd) + len;
+ int i, done;
+
+ DBG("--- pack buffer %p - %d bytes (fifo %d) ---", data, len, buflen);
+
+ isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT);
+ isp116x_write_reg16(isp116x, HCXFERCTR, buflen);
+ isp116x_write_addr(isp116x, HCATLPORT | ISP116x_WRITE_OFFSET);
+
+ done = 0;
+ for (i = 0; i < n; i++) {
+ DBG("i=%d - done=%d - len=%d", i, done, PTD_GET_LEN(&ptd[i]));
+
+ dump_ptd(&ptd[i]);
+ isp116x_write_data16(isp116x, ptd[i].count);
+ isp116x_write_data16(isp116x, ptd[i].mps);
+ isp116x_write_data16(isp116x, ptd[i].len);
+ isp116x_write_data16(isp116x, ptd[i].faddr);
+
+ dump_ptd_data(&ptd[i], (__u8 *) data + done, 0);
+ write_ptddata_to_fifo(isp116x,
+ (__u8 *) data + done,
+ PTD_GET_LEN(&ptd[i]));
+
+ done += PTD_GET_LEN(&ptd[i]);
+ }
+}
+
+/* Read the processed PTD's and data from fifo ram back to URBs' buffers.
+ * Fifo must be full and done */
+static int unpack_fifo(struct isp116x *isp116x, struct usb_device *dev,
+ unsigned long pipe, struct ptd *ptd, int n, void *data,
+ int len)
+{
+ int buflen = n * sizeof(struct ptd) + len;
+ int i, done, cc, ret;
+
+ isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT);
+ isp116x_write_reg16(isp116x, HCXFERCTR, buflen);
+ isp116x_write_addr(isp116x, HCATLPORT);
+
+ ret = TD_CC_NOERROR;
+ done = 0;
+ for (i = 0; i < n; i++) {
+ DBG("i=%d - done=%d - len=%d", i, done, PTD_GET_LEN(&ptd[i]));
+
+ ptd[i].count = isp116x_read_data16(isp116x);
+ ptd[i].mps = isp116x_read_data16(isp116x);
+ ptd[i].len = isp116x_read_data16(isp116x);
+ ptd[i].faddr = isp116x_read_data16(isp116x);
+ dump_ptd(&ptd[i]);
+
+ read_ptddata_from_fifo(isp116x,
+ (__u8 *) data + done,
+ PTD_GET_LEN(&ptd[i]));
+ dump_ptd_data(&ptd[i], (__u8 *) data + done, 1);
+
+ done += PTD_GET_LEN(&ptd[i]);
+
+ cc = PTD_GET_CC(&ptd[i]);
+
+ /* Data underrun means basically that we had more buffer space than
+ * the function had data. It is perfectly normal but upper levels have
+ * to know how much we actually transferred.
+ */
+ if (cc == TD_NOTACCESSED ||
+ (cc != TD_CC_NOERROR && (ret == TD_CC_NOERROR || ret == TD_DATAUNDERRUN)))
+ ret = cc;
+ }
+
+ DBG("--- unpack buffer %p - %d bytes (fifo %d) ---", data, len, buflen);
+
+ return ret;
+}
+
+/* Interrupt handling
+ */
+static int isp116x_interrupt(struct isp116x *isp116x)
+{
+ u16 irqstat;
+ u32 intstat;
+ int ret = 0;
+
+ isp116x_write_reg16(isp116x, HCuPINTENB, 0);
+ irqstat = isp116x_read_reg16(isp116x, HCuPINT);
+ isp116x_write_reg16(isp116x, HCuPINT, irqstat);
+ DBG(">>>>>> irqstat %x <<<<<<", irqstat);
+
+ if (irqstat & HCuPINT_ATL) {
+ DBG(">>>>>> HCuPINT_ATL <<<<<<");
+ udelay(500);
+ ret = 1;
+ }
+
+ if (irqstat & HCuPINT_OPR) {
+ intstat = isp116x_read_reg32(isp116x, HCINTSTAT);
+ isp116x_write_reg32(isp116x, HCINTSTAT, intstat);
+ DBG(">>>>>> HCuPINT_OPR %x <<<<<<", intstat);
+
+ if (intstat & HCINT_UE) {
+ ERR("unrecoverable error, controller disabled");
+
+ /* FIXME: be optimistic, hope that bug won't repeat
+ * often. Make some non-interrupt context restart the
+ * controller. Count and limit the retries though;
+ * either hardware or software errors can go forever...
+ */
+ isp116x_reset(isp116x);
+ ret = -1;
+ return -1;
+ }
+
+ if (intstat & HCINT_RHSC) {
+ got_rhsc = 1;
+ ret = 1;
+ /* When root hub or any of its ports is going
+ to come out of suspend, it may take more
+ than 10ms for status bits to stabilize. */
+ wait_ms(20);
+ }
+
+ if (intstat & HCINT_SO) {
+ ERR("schedule overrun");
+ ret = -1;
+ }
+
+ irqstat &= ~HCuPINT_OPR;
+ }
+
+ return ret;
+}
+
+/* With one PTD we can transfer almost 1K in one go;
+ * HC does the splitting into endpoint digestible transactions
+ */
+struct ptd ptd[1];
+
+static inline int max_transfer_len(struct usb_device *dev, unsigned long pipe)
+{
+ unsigned mpck = usb_maxpacket(dev, pipe);
+
+ /* One PTD can transfer 1023 bytes but try to always
+ * transfer multiples of endpoint buffer size
+ */
+ return 1023 / mpck * mpck;
+}
+
+/* Do an USB transfer
+ */
+static int isp116x_submit_job(struct usb_device *dev, unsigned long pipe,
+ int dir, void *buffer, int len)
+{
+ struct isp116x *isp116x = &isp116x_dev;
+ int type = usb_pipetype(pipe);
+ int epnum = usb_pipeendpoint(pipe);
+ int max = usb_maxpacket(dev, pipe);
+ int dir_out = usb_pipeout(pipe);
+ int speed_low = usb_pipeslow(pipe);
+ int i, done = 0, stat, timeout, cc;
+
+ /* 500 frames or 0.5s timeout when function is busy and NAKs transactions for a while */
+ int retries = 500;
+
+ DBG("------------------------------------------------");
+ dump_msg(dev, pipe, buffer, len, "SUBMIT");
+ DBG("------------------------------------------------");
+
+ if (len >= 1024) {
+ ERR("Too big job");
+ dev->status = USB_ST_CRC_ERR;
+ return -1;
+ }
+
+ if (isp116x->disabled) {
+ ERR("EPIPE");
+ dev->status = USB_ST_CRC_ERR;
+ return -1;
+ }
+
+ /* device pulled? Shortcut the action. */
+ if (devgone == dev) {
+ ERR("ENODEV");
+ dev->status = USB_ST_CRC_ERR;
+ return USB_ST_CRC_ERR;
+ }
+
+ if (!max) {
+ ERR("pipesize for pipe %lx is zero", pipe);
+ dev->status = USB_ST_CRC_ERR;
+ return -1;
+ }
+
+ if (type == PIPE_ISOCHRONOUS) {
+ ERR("isochronous transfers not supported");
+ dev->status = USB_ST_CRC_ERR;
+ return -1;
+ }
+
+ /* FIFO not empty? */
+ if (isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_FULL) {
+ ERR("****** FIFO not empty! ******");
+ dev->status = USB_ST_BUF_ERR;
+ return -1;
+ }
+
+ retry:
+ isp116x_write_reg32(isp116x, HCINTSTAT, 0xff);
+
+ /* Prepare the PTD data */
+ ptd->count = PTD_CC_MSK | PTD_ACTIVE_MSK |
+ PTD_TOGGLE(usb_gettoggle(dev, epnum, dir_out));
+ ptd->mps = PTD_MPS(max) | PTD_SPD(speed_low) | PTD_EP(epnum) | PTD_LAST_MSK;
+ ptd->len = PTD_LEN(len) | PTD_DIR(dir);
+ ptd->faddr = PTD_FA(usb_pipedevice(pipe));
+
+retry_same:
+ /* Pack data into FIFO ram */
+ pack_fifo(isp116x, dev, pipe, ptd, 1, buffer, len);
+#ifdef EXTRA_DELAY
+ wait_ms(EXTRA_DELAY);
+#endif
+
+ /* Start the data transfer */
+
+ /* Allow more time for a BULK device to react - some are slow */
+ if (usb_pipetype(pipe) == PIPE_BULK)
+ timeout = 5000;
+ else
+ timeout = 100;
+
+ /* Wait for it to complete */
+ for (;;) {
+ /* Check whether the controller is done */
+ stat = isp116x_interrupt(isp116x);
+
+ if (stat < 0) {
+ dev->status = USB_ST_CRC_ERR;
+ break;
+ }
+ if (stat > 0)
+ break;
+
+ /* Check the timeout */
+ if (--timeout)
+ udelay(1);
+ else {
+ ERR("CTL:TIMEOUT ");
+ stat = USB_ST_CRC_ERR;
+ break;
+ }
+ }
+
+ /* We got an Root Hub Status Change interrupt */
+ if (got_rhsc) {
+ isp116x_show_regs(isp116x);
+
+ got_rhsc = 0;
+
+ /* Abuse timeout */
+ timeout = rh_check_port_status(isp116x);
+ if (timeout >= 0) {
+ /*
+ * FIXME! NOTE! AAAARGH!
+ * This is potentially dangerous because it assumes
+ * that only one device is ever plugged in!
+ */
+ devgone = dev;
+ }
+ }
+
+ /* Ok, now we can read transfer status */
+
+ /* FIFO not ready? */
+ if (!(isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_DONE)) {
+ ERR("****** FIFO not ready! ******");
+ dev->status = USB_ST_BUF_ERR;
+ return -1;
+ }
+
+ /* Unpack data from FIFO ram */
+ cc = unpack_fifo(isp116x, dev, pipe, ptd, 1, buffer, len);
+
+ i = PTD_GET_COUNT(ptd);
+ done += i;
+ buffer += i;
+ len -= i;
+
+ /* There was some kind of real problem; Prepare the PTD again
+ * and retry from the failed transaction on
+ */
+ if (cc && cc != TD_NOTACCESSED && cc != TD_DATAUNDERRUN) {
+ if (retries >= 100) {
+ retries -= 100;
+ /* The chip will have toggled the toggle bit for the failed
+ * transaction too. We have to toggle it back.
+ */
+ usb_settoggle(dev, epnum, dir_out, !PTD_GET_TOGGLE(ptd));
+ goto retry;
+ }
+ }
+ /* "Normal" errors; TD_NOTACCESSED would mean in effect that the function have NAKed
+ * the transactions from the first on for the whole frame. It may be busy and we retry
+ * with the same PTD. PTD_ACTIVE (and not TD_NOTACCESSED) would mean that some of the
+ * PTD didn't make it because the function was busy or the frame ended before the PTD
+ * finished. We prepare the rest of the data and try again.
+ */
+ else if (cc == TD_NOTACCESSED || PTD_GET_ACTIVE(ptd) || (cc != TD_DATAUNDERRUN && PTD_GET_COUNT(ptd) < PTD_GET_LEN(ptd))) {
+ if (retries) {
+ --retries;
+ if (cc == TD_NOTACCESSED && PTD_GET_ACTIVE(ptd) && !PTD_GET_COUNT(ptd)) goto retry_same;
+ usb_settoggle(dev, epnum, dir_out, PTD_GET_TOGGLE(ptd));
+ goto retry;
+ }
+ }
+
+ if (cc != TD_CC_NOERROR && cc != TD_DATAUNDERRUN) {
+ DBG("****** completition code error %x ******", cc);
+ switch (cc) {
+ case TD_CC_BITSTUFFING:
+ dev->status = USB_ST_BIT_ERR;
+ break;
+ case TD_CC_STALL:
+ dev->status = USB_ST_STALLED;
+ break;
+ case TD_BUFFEROVERRUN:
+ case TD_BUFFERUNDERRUN:
+ dev->status = USB_ST_BUF_ERR;
+ break;
+ default:
+ dev->status = USB_ST_CRC_ERR;
+ }
+ return -cc;
+ }
+ else usb_settoggle(dev, epnum, dir_out, PTD_GET_TOGGLE(ptd));
+
+ dump_msg(dev, pipe, buffer, len, "SUBMIT(ret)");
+
+ dev->status = 0;
+ return done;
+}
+
+/* Adapted from au1x00_usb_ohci.c
+ */
+static int isp116x_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len,
+ struct devrequest *cmd)
+{
+ struct isp116x *isp116x = &isp116x_dev;
+ u32 tmp = 0;
+
+ int leni = transfer_len;
+ int len = 0;
+ int stat = 0;
+ u32 datab[4];
+ u8 *data_buf = (u8 *) datab;
+ u16 bmRType_bReq;
+ u16 wValue;
+ u16 wIndex;
+ u16 wLength;
+
+ if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+ INFO("Root-Hub submit IRQ: NOT implemented");
+ return 0;
+ }
+
+ bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+ wValue = swap_16(cmd->value);
+ wIndex = swap_16(cmd->index);
+ wLength = swap_16(cmd->length);
+
+ DBG("--- HUB ----------------------------------------");
+ DBG("submit rh urb, req=%x val=%#x index=%#x len=%d",
+ bmRType_bReq, wValue, wIndex, wLength);
+ dump_msg(dev, pipe, buffer, transfer_len, "RH");
+ DBG("------------------------------------------------");
+
+ switch (bmRType_bReq) {
+ case RH_GET_STATUS:
+ DBG("RH_GET_STATUS");
+
+ *(__u16 *) data_buf = swap_16(1);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_INTERFACE:
+ DBG("RH_GET_STATUS | RH_INTERFACE");
+
+ *(__u16 *) data_buf = swap_16(0);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_ENDPOINT:
+ DBG("RH_GET_STATUS | RH_ENDPOINT");
+
+ *(__u16 *) data_buf = swap_16(0);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_CLASS:
+ DBG("RH_GET_STATUS | RH_CLASS");
+
+ tmp = isp116x_read_reg32(isp116x, HCRHSTATUS);
+
+ *(__u32 *) data_buf = swap_32(tmp & ~(RH_HS_CRWE | RH_HS_DRWE));
+ len = 4;
+ break;
+
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+ DBG("RH_GET_STATUS | RH_OTHER | RH_CLASS");
+
+ tmp = isp116x_read_reg32(isp116x, HCRHPORT1 + wIndex - 1);
+ *(__u32 *) data_buf = swap_32(tmp);
+ isp116x_show_regs(isp116x);
+ len = 4;
+ break;
+
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ DBG("RH_CLEAR_FEATURE | RH_ENDPOINT");
+
+ switch (wValue) {
+ case RH_ENDPOINT_STALL:
+ DBG("C_HUB_ENDPOINT_STALL");
+ len = 0;
+ break;
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ DBG("RH_CLEAR_FEATURE | RH_CLASS");
+
+ switch (wValue) {
+ case RH_C_HUB_LOCAL_POWER:
+ DBG("C_HUB_LOCAL_POWER");
+ len = 0;
+ break;
+
+ case RH_C_HUB_OVER_CURRENT:
+ DBG("C_HUB_OVER_CURRENT");
+ isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_OCIC);
+ len = 0;
+ break;
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ DBG("RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS");
+
+ switch (wValue) {
+ case RH_PORT_ENABLE:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_CCS);
+ len = 0;
+ break;
+
+ case RH_PORT_SUSPEND:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_POCI);
+ len = 0;
+ break;
+
+ case RH_PORT_POWER:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_LSDA);
+ len = 0;
+ break;
+
+ case RH_C_PORT_CONNECTION:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_CSC);
+ len = 0;
+ break;
+
+ case RH_C_PORT_ENABLE:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PESC);
+ len = 0;
+ break;
+
+ case RH_C_PORT_SUSPEND:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PSSC);
+ len = 0;
+ break;
+
+ case RH_C_PORT_OVER_CURRENT:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_POCI);
+ len = 0;
+ break;
+
+ case RH_C_PORT_RESET:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PRSC);
+ len = 0;
+ break;
+
+ default:
+ ERR("invalid wValue");
+ stat = USB_ST_STALLED;
+ }
+
+ isp116x_show_regs(isp116x);
+
+ break;
+
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ DBG("RH_SET_FEATURE | RH_OTHER | RH_CLASS");
+
+ switch (wValue) {
+ case RH_PORT_SUSPEND:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PSS);
+ len = 0;
+ break;
+
+ case RH_PORT_RESET:
+ /* Spin until any current reset finishes */
+ while (1) {
+ tmp =
+ isp116x_read_reg32(isp116x,
+ HCRHPORT1 + wIndex - 1);
+ if (!(tmp & RH_PS_PRS))
+ break;
+ wait_ms(1);
+ }
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PRS);
+ wait_ms(10);
+
+ len = 0;
+ break;
+
+ case RH_PORT_POWER:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PPS);
+ len = 0;
+ break;
+
+ case RH_PORT_ENABLE:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PES);
+ len = 0;
+ break;
+
+ default:
+ ERR("invalid wValue");
+ stat = USB_ST_STALLED;
+ }
+
+ isp116x_show_regs(isp116x);
+
+ break;
+
+ case RH_SET_ADDRESS:
+ DBG("RH_SET_ADDRESS");
+
+ rh_devnum = wValue;
+ len = 0;
+ break;
+
+ case RH_GET_DESCRIPTOR:
+ DBG("RH_GET_DESCRIPTOR: %x, %d", wValue, wLength);
+
+ switch (wValue) {
+ case (USB_DT_DEVICE << 8): /* device descriptor */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_dev_des),
+ wLength));
+ data_buf = root_hub_dev_des;
+ break;
+
+ case (USB_DT_CONFIG << 8): /* configuration descriptor */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_config_des),
+ wLength));
+ data_buf = root_hub_config_des;
+ break;
+
+ case ((USB_DT_STRING << 8) | 0x00): /* string 0 descriptors */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_str_index0),
+ wLength));
+ data_buf = root_hub_str_index0;
+ break;
+
+ case ((USB_DT_STRING << 8) | 0x01): /* string 1 descriptors */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_str_index1),
+ wLength));
+ data_buf = root_hub_str_index1;
+ break;
+
+ default:
+ ERR("invalid wValue");
+ stat = USB_ST_STALLED;
+ }
+
+ break;
+
+ case RH_GET_DESCRIPTOR | RH_CLASS:
+ DBG("RH_GET_DESCRIPTOR | RH_CLASS");
+
+ tmp = isp116x_read_reg32(isp116x, HCRHDESCA);
+
+ data_buf[0] = 0x09; /* min length; */
+ data_buf[1] = 0x29;
+ data_buf[2] = tmp & RH_A_NDP;
+ data_buf[3] = 0;
+ if (tmp & RH_A_PSM) /* per-port power switching? */
+ data_buf[3] |= 0x01;
+ if (tmp & RH_A_NOCP) /* no overcurrent reporting? */
+ data_buf[3] |= 0x10;
+ else if (tmp & RH_A_OCPM) /* per-port overcurrent rep? */
+ data_buf[3] |= 0x08;
+
+ /* Corresponds to data_buf[4-7] */
+ datab[1] = 0;
+ data_buf[5] = (tmp & RH_A_POTPGT) >> 24;
+
+ tmp = isp116x_read_reg32(isp116x, HCRHDESCB);
+
+ data_buf[7] = tmp & RH_B_DR;
+ if (data_buf[2] < 7)
+ data_buf[8] = 0xff;
+ else {
+ data_buf[0] += 2;
+ data_buf[8] = (tmp & RH_B_DR) >> 8;
+ data_buf[10] = data_buf[9] = 0xff;
+ }
+
+ len = min_t(unsigned int, leni,
+ min_t(unsigned int, data_buf[0], wLength));
+ break;
+
+ case RH_GET_CONFIGURATION:
+ DBG("RH_GET_CONFIGURATION");
+
+ *(__u8 *) data_buf = 0x01;
+ len = 1;
+ break;
+
+ case RH_SET_CONFIGURATION:
+ DBG("RH_SET_CONFIGURATION");
+
+ isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPSC);
+ len = 0;
+ break;
+
+ default:
+ ERR("*** *** *** unsupported root hub command *** *** ***");
+ stat = USB_ST_STALLED;
+ }
+
+ len = min_t(int, len, leni);
+ if (buffer != data_buf)
+ memcpy(buffer, data_buf, len);
+
+ dev->act_len = len;
+ dev->status = stat;
+ DBG("dev act_len %d, status %d", dev->act_len, dev->status);
+
+ dump_msg(dev, pipe, buffer, transfer_len, "RH(ret)");
+
+ return stat;
+}
+
+/* --- Transfer functions -------------------------------------------------- */
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len, int interval)
+{
+ DBG("dev=%p pipe=%#lx buf=%p size=%d int=%d",
+ dev, pipe, buffer, len, interval);
+
+ return -1;
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len, struct devrequest *setup)
+{
+ int devnum = usb_pipedevice(pipe);
+ int epnum = usb_pipeendpoint(pipe);
+ int max = max_transfer_len(dev, pipe);
+ int dir_in = usb_pipein(pipe);
+ int done, ret;
+
+ /* Control message is for the HUB? */
+ if (devnum == rh_devnum)
+ return isp116x_submit_rh_msg(dev, pipe, buffer, len, setup);
+
+ /* Ok, no HUB message so send the message to the device */
+
+ /* Setup phase */
+ DBG("--- SETUP PHASE --------------------------------");
+ usb_settoggle(dev, epnum, 1, 0);
+ ret = isp116x_submit_job(dev, pipe,
+ PTD_DIR_SETUP,
+ setup, sizeof(struct devrequest));
+ if (ret < 0) {
+ DBG("control setup phase error (ret = %d", ret);
+ return -1;
+ }
+
+ /* Data phase */
+ DBG("--- DATA PHASE ---------------------------------");
+ done = 0;
+ usb_settoggle(dev, epnum, !dir_in, 1);
+ while (done < len) {
+ ret = isp116x_submit_job(dev, pipe,
+ dir_in ? PTD_DIR_IN : PTD_DIR_OUT,
+ (__u8 *) buffer + done,
+ max > len - done ? len - done : max);
+ if (ret < 0) {
+ DBG("control data phase error (ret = %d)", ret);
+ return -1;
+ }
+ done += ret;
+
+ if (dir_in && ret < max) /* short packet */
+ break;
+ }
+
+ /* Status phase */
+ DBG("--- STATUS PHASE -------------------------------");
+ usb_settoggle(dev, epnum, !dir_in, 1);
+ ret = isp116x_submit_job(dev, pipe,
+ !dir_in ? PTD_DIR_IN : PTD_DIR_OUT, NULL, 0);
+ if (ret < 0) {
+ DBG("control status phase error (ret = %d", ret);
+ return -1;
+ }
+
+ dev->act_len = done;
+
+ dump_msg(dev, pipe, buffer, len, "DEV(ret)");
+
+ return done;
+}
+
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len)
+{
+ int dir_out = usb_pipeout(pipe);
+ int max = max_transfer_len(dev, pipe);
+ int done, ret;
+
+ DBG("--- BULK ---------------------------------------");
+ DBG("dev=%ld pipe=%ld buf=%p size=%d dir_out=%d",
+ usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out);
+
+ done = 0;
+ while (done < len) {
+ ret = isp116x_submit_job(dev, pipe,
+ !dir_out ? PTD_DIR_IN : PTD_DIR_OUT,
+ (__u8 *) buffer + done,
+ max > len - done ? len - done : max);
+ if (ret < 0) {
+ DBG("error on bulk message (ret = %d)", ret);
+ return -1;
+ }
+
+ done += ret;
+
+ if (!dir_out && ret < max) /* short packet */
+ break;
+ }
+
+ dev->act_len = done;
+
+ return 0;
+}
+
+/* --- Basic functions ----------------------------------------------------- */
+
+static int isp116x_sw_reset(struct isp116x *isp116x)
+{
+ int retries = 15;
+ int ret = 0;
+
+ DBG("");
+
+ isp116x->disabled = 1;
+
+ isp116x_write_reg16(isp116x, HCSWRES, HCSWRES_MAGIC);
+ isp116x_write_reg32(isp116x, HCCMDSTAT, HCCMDSTAT_HCR);
+ while (--retries) {
+ /* It usually resets within 1 ms */
+ wait_ms(1);
+ if (!(isp116x_read_reg32(isp116x, HCCMDSTAT) & HCCMDSTAT_HCR))
+ break;
+ }
+ if (!retries) {
+ ERR("software reset timeout");
+ ret = -1;
+ }
+ return ret;
+}
+
+static int isp116x_reset(struct isp116x *isp116x)
+{
+ unsigned long t;
+ u16 clkrdy = 0;
+ int ret, timeout = 15 /* ms */ ;
+
+ DBG("");
+
+ ret = isp116x_sw_reset(isp116x);
+ if (ret)
+ return ret;
+
+ for (t = 0; t < timeout; t++) {
+ clkrdy = isp116x_read_reg16(isp116x, HCuPINT) & HCuPINT_CLKRDY;
+ if (clkrdy)
+ break;
+ wait_ms(1);
+ }
+ if (!clkrdy) {
+ ERR("clock not ready after %dms", timeout);
+ /* After sw_reset the clock won't report to be ready, if
+ H_WAKEUP pin is high. */
+ ERR("please make sure that the H_WAKEUP pin is pulled low!");
+ ret = -1;
+ }
+ return ret;
+}
+
+static void isp116x_stop(struct isp116x *isp116x)
+{
+ u32 val;
+
+ DBG("");
+
+ isp116x_write_reg16(isp116x, HCuPINTENB, 0);
+
+ /* Switch off ports' power, some devices don't come up
+ after next 'start' without this */
+ val = isp116x_read_reg32(isp116x, HCRHDESCA);
+ val &= ~(RH_A_NPS | RH_A_PSM);
+ isp116x_write_reg32(isp116x, HCRHDESCA, val);
+ isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPS);
+
+ isp116x_sw_reset(isp116x);
+}
+
+/*
+ * Configure the chip. The chip must be successfully reset by now.
+ */
+static int isp116x_start(struct isp116x *isp116x)
+{
+ struct isp116x_platform_data *board = isp116x->board;
+ u32 val;
+
+ DBG("");
+
+ /* Clear interrupt status and disable all interrupt sources */
+ isp116x_write_reg16(isp116x, HCuPINT, 0xff);
+ isp116x_write_reg16(isp116x, HCuPINTENB, 0);
+
+ isp116x_write_reg16(isp116x, HCITLBUFLEN, ISP116x_ITL_BUFSIZE);
+ isp116x_write_reg16(isp116x, HCATLBUFLEN, ISP116x_ATL_BUFSIZE);
+
+ /* Hardware configuration */
+ val = HCHWCFG_DBWIDTH(1);
+ if (board->sel15Kres)
+ val |= HCHWCFG_15KRSEL;
+ /* Remote wakeup won't work without working clock */
+ if (board->remote_wakeup_enable)
+ val |= HCHWCFG_CLKNOTSTOP;
+ if (board->oc_enable)
+ val |= HCHWCFG_ANALOG_OC;
+ isp116x_write_reg16(isp116x, HCHWCFG, val);
+
+ /* --- Root hub configuration */
+ val = (25 << 24) & RH_A_POTPGT;
+ /* AN10003_1.pdf recommends RH_A_NPS (no power switching) to
+ be always set. Yet, instead, we request individual port
+ power switching. */
+ val |= RH_A_PSM;
+ /* Report overcurrent per port */
+ val |= RH_A_OCPM;
+ isp116x_write_reg32(isp116x, HCRHDESCA, val);
+ isp116x->rhdesca = isp116x_read_reg32(isp116x, HCRHDESCA);
+
+ val = RH_B_PPCM;
+ isp116x_write_reg32(isp116x, HCRHDESCB, val);
+ isp116x->rhdescb = isp116x_read_reg32(isp116x, HCRHDESCB);
+
+ val = 0;
+ if (board->remote_wakeup_enable)
+ val |= RH_HS_DRWE;
+ isp116x_write_reg32(isp116x, HCRHSTATUS, val);
+ isp116x->rhstatus = isp116x_read_reg32(isp116x, HCRHSTATUS);
+
+ isp116x_write_reg32(isp116x, HCFMINTVL, 0x27782edf);
+
+ /* Go operational */
+ val = HCCONTROL_USB_OPER;
+ if (board->remote_wakeup_enable)
+ val |= HCCONTROL_RWE;
+ isp116x_write_reg32(isp116x, HCCONTROL, val);
+
+ /* Disable ports to avoid race in device enumeration */
+ isp116x_write_reg32(isp116x, HCRHPORT1, RH_PS_CCS);
+ isp116x_write_reg32(isp116x, HCRHPORT2, RH_PS_CCS);
+
+ isp116x_show_regs(isp116x);
+
+ isp116x->disabled = 0;
+
+ return 0;
+}
+
+/* --- Init functions ------------------------------------------------------ */
+
+int isp116x_check_id(struct isp116x *isp116x)
+{
+ int val;
+
+ val = isp116x_read_reg16(isp116x, HCCHIPID);
+ if ((val & HCCHIPID_MASK) != HCCHIPID_MAGIC) {
+ ERR("invalid chip ID %04x", val);
+ return -1;
+ }
+
+ return 0;
+}
+
+int usb_lowlevel_init(void)
+{
+ struct isp116x *isp116x = &isp116x_dev;
+
+ DBG("");
+
+ got_rhsc = rh_devnum = 0;
+
+ /* Init device registers addr */
+ isp116x->addr_reg = (u16 *) ISP116X_HCD_ADDR;
+ isp116x->data_reg = (u16 *) ISP116X_HCD_DATA;
+
+ /* Setup specific board settings */
+#ifdef ISP116X_HCD_SEL15kRES
+ isp116x_board.sel15Kres = 1;
+#endif
+#ifdef ISP116X_HCD_OC_ENABLE
+ isp116x_board.oc_enable = 1;
+#endif
+#ifdef ISP116X_HCD_REMOTE_WAKEUP_ENABLE
+ isp116x_board.remote_wakeup_enable = 1;
+#endif
+ isp116x->board = &isp116x_board;
+
+ /* Try to get ISP116x silicon chip ID */
+ if (isp116x_check_id(isp116x) < 0)
+ return -1;
+
+ isp116x->disabled = 1;
+ isp116x->sleeping = 0;
+
+ isp116x_reset(isp116x);
+ isp116x_start(isp116x);
+
+ return 0;
+}
+
+int usb_lowlevel_stop(void)
+{
+ struct isp116x *isp116x = &isp116x_dev;
+
+ DBG("");
+
+ if (!isp116x->disabled)
+ isp116x_stop(isp116x);
+
+ return 0;
+}
+
+#endif /* CONFIG_USB_ISP116X_HCD */
--- /dev/null
+/*
+ * ISP116x register declarations and HCD data structures
+ *
+ * Copyright (C) 2007 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (C) 2007 Eurotech S.p.A. <info@eurotech.it>
+ * Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee>
+ * Portions:
+ * Copyright (C) 2004 Lothar Wassmann
+ * Copyright (C) 2004 Psion Teklogix
+ * Copyright (C) 2004 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifdef DEBUG
+#define DBG(fmt, args...) \
+ printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args)
+#else
+#define DBG(fmt, args...) do {} while (0)
+#endif
+
+#ifdef VERBOSE
+# define VDBG DBG
+#else
+# define VDBG(fmt, args...) do {} while (0)
+#endif
+
+#define ERR(fmt, args...) \
+ printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args)
+#define WARN(fmt, args...) \
+ printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args)
+#define INFO(fmt, args...) \
+ printf("isp116x: " fmt "\n" , ## args)
+
+/* ------------------------------------------------------------------------- */
+
+/* us of 1ms frame */
+#define MAX_LOAD_LIMIT 850
+
+/* Full speed: max # of bytes to transfer for a single urb
+ at a time must be < 1024 && must be multiple of 64.
+ 832 allows transfering 4kiB within 5 frames. */
+#define MAX_TRANSFER_SIZE_FULLSPEED 832
+
+/* Low speed: there is no reason to schedule in very big
+ chunks; often the requested long transfers are for
+ string descriptors containing short strings. */
+#define MAX_TRANSFER_SIZE_LOWSPEED 64
+
+/* Bytetime (us), a rough indication of how much time it
+ would take to transfer a byte of useful data over USB */
+#define BYTE_TIME_FULLSPEED 1
+#define BYTE_TIME_LOWSPEED 20
+
+/* Buffer sizes */
+#define ISP116x_BUF_SIZE 4096
+#define ISP116x_ITL_BUFSIZE 0
+#define ISP116x_ATL_BUFSIZE ((ISP116x_BUF_SIZE) - 2*(ISP116x_ITL_BUFSIZE))
+
+#define ISP116x_WRITE_OFFSET 0x80
+
+/* --- ISP116x registers/bits ---------------------------------------------- */
+
+#define HCREVISION 0x00
+#define HCCONTROL 0x01
+#define HCCONTROL_HCFS (3 << 6) /* host controller
+ functional state */
+#define HCCONTROL_USB_RESET (0 << 6)
+#define HCCONTROL_USB_RESUME (1 << 6)
+#define HCCONTROL_USB_OPER (2 << 6)
+#define HCCONTROL_USB_SUSPEND (3 << 6)
+#define HCCONTROL_RWC (1 << 9) /* remote wakeup connected */
+#define HCCONTROL_RWE (1 << 10) /* remote wakeup enable */
+#define HCCMDSTAT 0x02
+#define HCCMDSTAT_HCR (1 << 0) /* host controller reset */
+#define HCCMDSTAT_SOC (3 << 16) /* scheduling overrun count */
+#define HCINTSTAT 0x03
+#define HCINT_SO (1 << 0) /* scheduling overrun */
+#define HCINT_WDH (1 << 1) /* writeback of done_head */
+#define HCINT_SF (1 << 2) /* start frame */
+#define HCINT_RD (1 << 3) /* resume detect */
+#define HCINT_UE (1 << 4) /* unrecoverable error */
+#define HCINT_FNO (1 << 5) /* frame number overflow */
+#define HCINT_RHSC (1 << 6) /* root hub status change */
+#define HCINT_OC (1 << 30) /* ownership change */
+#define HCINT_MIE (1 << 31) /* master interrupt enable */
+#define HCINTENB 0x04
+#define HCINTDIS 0x05
+#define HCFMINTVL 0x0d
+#define HCFMREM 0x0e
+#define HCFMNUM 0x0f
+#define HCLSTHRESH 0x11
+#define HCRHDESCA 0x12
+#define RH_A_NDP (0x3 << 0) /* # downstream ports */
+#define RH_A_PSM (1 << 8) /* power switching mode */
+#define RH_A_NPS (1 << 9) /* no power switching */
+#define RH_A_DT (1 << 10) /* device type (mbz) */
+#define RH_A_OCPM (1 << 11) /* overcurrent protection
+ mode */
+#define RH_A_NOCP (1 << 12) /* no overcurrent protection */
+#define RH_A_POTPGT (0xff << 24) /* power on -> power good
+ time */
+#define HCRHDESCB 0x13
+#define RH_B_DR (0xffff << 0) /* device removable flags */
+#define RH_B_PPCM (0xffff << 16) /* port power control mask */
+#define HCRHSTATUS 0x14
+#define RH_HS_LPS (1 << 0) /* local power status */
+#define RH_HS_OCI (1 << 1) /* over current indicator */
+#define RH_HS_DRWE (1 << 15) /* device remote wakeup
+ enable */
+#define RH_HS_LPSC (1 << 16) /* local power status change */
+#define RH_HS_OCIC (1 << 17) /* over current indicator
+ change */
+#define RH_HS_CRWE (1 << 31) /* clear remote wakeup
+ enable */
+#define HCRHPORT1 0x15
+#define RH_PS_CCS (1 << 0) /* current connect status */
+#define RH_PS_PES (1 << 1) /* port enable status */
+#define RH_PS_PSS (1 << 2) /* port suspend status */
+#define RH_PS_POCI (1 << 3) /* port over current
+ indicator */
+#define RH_PS_PRS (1 << 4) /* port reset status */
+#define RH_PS_PPS (1 << 8) /* port power status */
+#define RH_PS_LSDA (1 << 9) /* low speed device attached */
+#define RH_PS_CSC (1 << 16) /* connect status change */
+#define RH_PS_PESC (1 << 17) /* port enable status change */
+#define RH_PS_PSSC (1 << 18) /* port suspend status
+ change */
+#define RH_PS_OCIC (1 << 19) /* over current indicator
+ change */
+#define RH_PS_PRSC (1 << 20) /* port reset status change */
+#define HCRHPORT_CLRMASK (0x1f << 16)
+#define HCRHPORT2 0x16
+#define HCHWCFG 0x20
+#define HCHWCFG_15KRSEL (1 << 12)
+#define HCHWCFG_CLKNOTSTOP (1 << 11)
+#define HCHWCFG_ANALOG_OC (1 << 10)
+#define HCHWCFG_DACK_MODE (1 << 8)
+#define HCHWCFG_EOT_POL (1 << 7)
+#define HCHWCFG_DACK_POL (1 << 6)
+#define HCHWCFG_DREQ_POL (1 << 5)
+#define HCHWCFG_DBWIDTH_MASK (0x03 << 3)
+#define HCHWCFG_DBWIDTH(n) (((n) << 3) & HCHWCFG_DBWIDTH_MASK)
+#define HCHWCFG_INT_POL (1 << 2)
+#define HCHWCFG_INT_TRIGGER (1 << 1)
+#define HCHWCFG_INT_ENABLE (1 << 0)
+#define HCDMACFG 0x21
+#define HCDMACFG_BURST_LEN_MASK (0x03 << 5)
+#define HCDMACFG_BURST_LEN(n) (((n) << 5) & HCDMACFG_BURST_LEN_MASK)
+#define HCDMACFG_BURST_LEN_1 HCDMACFG_BURST_LEN(0)
+#define HCDMACFG_BURST_LEN_4 HCDMACFG_BURST_LEN(1)
+#define HCDMACFG_BURST_LEN_8 HCDMACFG_BURST_LEN(2)
+#define HCDMACFG_DMA_ENABLE (1 << 4)
+#define HCDMACFG_BUF_TYPE_MASK (0x07 << 1)
+#define HCDMACFG_CTR_SEL (1 << 2)
+#define HCDMACFG_ITLATL_SEL (1 << 1)
+#define HCDMACFG_DMA_RW_SELECT (1 << 0)
+#define HCXFERCTR 0x22
+#define HCuPINT 0x24
+#define HCuPINT_SOF (1 << 0)
+#define HCuPINT_ATL (1 << 1)
+#define HCuPINT_AIIEOT (1 << 2)
+#define HCuPINT_OPR (1 << 4)
+#define HCuPINT_SUSP (1 << 5)
+#define HCuPINT_CLKRDY (1 << 6)
+#define HCuPINTENB 0x25
+#define HCCHIPID 0x27
+#define HCCHIPID_MASK 0xff00
+#define HCCHIPID_MAGIC 0x6100
+#define HCSCRATCH 0x28
+#define HCSWRES 0x29
+#define HCSWRES_MAGIC 0x00f6
+#define HCITLBUFLEN 0x2a
+#define HCATLBUFLEN 0x2b
+#define HCBUFSTAT 0x2c
+#define HCBUFSTAT_ITL0_FULL (1 << 0)
+#define HCBUFSTAT_ITL1_FULL (1 << 1)
+#define HCBUFSTAT_ATL_FULL (1 << 2)
+#define HCBUFSTAT_ITL0_DONE (1 << 3)
+#define HCBUFSTAT_ITL1_DONE (1 << 4)
+#define HCBUFSTAT_ATL_DONE (1 << 5)
+#define HCRDITL0LEN 0x2d
+#define HCRDITL1LEN 0x2e
+#define HCITLPORT 0x40
+#define HCATLPORT 0x41
+
+/* PTD accessor macros. */
+#define PTD_GET_COUNT(p) (((p)->count & PTD_COUNT_MSK) >> 0)
+#define PTD_COUNT(v) (((v) << 0) & PTD_COUNT_MSK)
+#define PTD_GET_TOGGLE(p) (((p)->count & PTD_TOGGLE_MSK) >> 10)
+#define PTD_TOGGLE(v) (((v) << 10) & PTD_TOGGLE_MSK)
+#define PTD_GET_ACTIVE(p) (((p)->count & PTD_ACTIVE_MSK) >> 11)
+#define PTD_ACTIVE(v) (((v) << 11) & PTD_ACTIVE_MSK)
+#define PTD_GET_CC(p) (((p)->count & PTD_CC_MSK) >> 12)
+#define PTD_CC(v) (((v) << 12) & PTD_CC_MSK)
+#define PTD_GET_MPS(p) (((p)->mps & PTD_MPS_MSK) >> 0)
+#define PTD_MPS(v) (((v) << 0) & PTD_MPS_MSK)
+#define PTD_GET_SPD(p) (((p)->mps & PTD_SPD_MSK) >> 10)
+#define PTD_SPD(v) (((v) << 10) & PTD_SPD_MSK)
+#define PTD_GET_LAST(p) (((p)->mps & PTD_LAST_MSK) >> 11)
+#define PTD_LAST(v) (((v) << 11) & PTD_LAST_MSK)
+#define PTD_GET_EP(p) (((p)->mps & PTD_EP_MSK) >> 12)
+#define PTD_EP(v) (((v) << 12) & PTD_EP_MSK)
+#define PTD_GET_LEN(p) (((p)->len & PTD_LEN_MSK) >> 0)
+#define PTD_LEN(v) (((v) << 0) & PTD_LEN_MSK)
+#define PTD_GET_DIR(p) (((p)->len & PTD_DIR_MSK) >> 10)
+#define PTD_DIR(v) (((v) << 10) & PTD_DIR_MSK)
+#define PTD_GET_B5_5(p) (((p)->len & PTD_B5_5_MSK) >> 13)
+#define PTD_B5_5(v) (((v) << 13) & PTD_B5_5_MSK)
+#define PTD_GET_FA(p) (((p)->faddr & PTD_FA_MSK) >> 0)
+#define PTD_FA(v) (((v) << 0) & PTD_FA_MSK)
+#define PTD_GET_FMT(p) (((p)->faddr & PTD_FMT_MSK) >> 7)
+#define PTD_FMT(v) (((v) << 7) & PTD_FMT_MSK)
+
+/* Hardware transfer status codes -- CC from ptd->count */
+#define TD_CC_NOERROR 0x00
+#define TD_CC_CRC 0x01
+#define TD_CC_BITSTUFFING 0x02
+#define TD_CC_DATATOGGLEM 0x03
+#define TD_CC_STALL 0x04
+#define TD_DEVNOTRESP 0x05
+#define TD_PIDCHECKFAIL 0x06
+#define TD_UNEXPECTEDPID 0x07
+#define TD_DATAOVERRUN 0x08
+#define TD_DATAUNDERRUN 0x09
+ /* 0x0A, 0x0B reserved for hardware */
+#define TD_BUFFEROVERRUN 0x0C
+#define TD_BUFFERUNDERRUN 0x0D
+ /* 0x0E, 0x0F reserved for HCD */
+#define TD_NOTACCESSED 0x0F
+
+/* ------------------------------------------------------------------------- */
+
+#define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */
+#define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE)
+
+/* Philips transfer descriptor */
+struct ptd {
+ u16 count;
+#define PTD_COUNT_MSK (0x3ff << 0)
+#define PTD_TOGGLE_MSK (1 << 10)
+#define PTD_ACTIVE_MSK (1 << 11)
+#define PTD_CC_MSK (0xf << 12)
+ u16 mps;
+#define PTD_MPS_MSK (0x3ff << 0)
+#define PTD_SPD_MSK (1 << 10)
+#define PTD_LAST_MSK (1 << 11)
+#define PTD_EP_MSK (0xf << 12)
+ u16 len;
+#define PTD_LEN_MSK (0x3ff << 0)
+#define PTD_DIR_MSK (3 << 10)
+#define PTD_DIR_SETUP (0)
+#define PTD_DIR_OUT (1)
+#define PTD_DIR_IN (2)
+#define PTD_B5_5_MSK (1 << 13)
+ u16 faddr;
+#define PTD_FA_MSK (0x7f << 0)
+#define PTD_FMT_MSK (1 << 7)
+} __attribute__ ((packed, aligned(2)));
+
+struct isp116x_ep {
+ struct usb_device *udev;
+ struct ptd ptd;
+
+ u8 maxpacket;
+ u8 epnum;
+ u8 nextpid;
+
+ u16 length; /* of current packet */
+ unsigned char *data; /* to databuf */
+
+ u16 error_count;
+};
+
+/* URB struct */
+#define N_URB_TD 48
+#define URB_DEL 1
+typedef struct {
+ struct isp116x_ep *ed;
+ void *transfer_buffer; /* (in) associated data buffer */
+ int actual_length; /* (return) actual transfer length */
+ unsigned long pipe; /* (in) pipe information */
+#if 0
+ int state;
+#endif
+} urb_priv_t;
+
+struct isp116x_platform_data {
+ /* Enable internal resistors on downstream ports */
+ unsigned sel15Kres:1;
+ /* On-chip overcurrent detection */
+ unsigned oc_enable:1;
+ /* Enable wakeup by devices on usb bus (e.g. wakeup
+ by attachment/detachment or by device activity
+ such as moving a mouse). When chosen, this option
+ prevents stopping internal clock, increasing
+ thereby power consumption in suspended state. */
+ unsigned remote_wakeup_enable:1;
+};
+
+struct isp116x {
+ u16 *addr_reg;
+ u16 *data_reg;
+
+ struct isp116x_platform_data *board;
+
+ struct dentry *dentry;
+ unsigned long stat1, stat2, stat4, stat8, stat16;
+
+ /* Status flags */
+ unsigned disabled:1;
+ unsigned sleeping:1;
+
+ /* Root hub registers */
+ u32 rhdesca;
+ u32 rhdescb;
+ u32 rhstatus;
+ u32 rhport[2];
+
+ /* Schedule for the current frame */
+ struct isp116x_ep *atl_active;
+ int atl_buflen;
+ int atl_bufshrt;
+ int atl_last_dir;
+ int atl_finishing;
+};
+
+/* ------------------------------------------------- */
+
+/* Inter-io delay (ns). The chip is picky about access timings; it
+ * expects at least:
+ * 150ns delay between consecutive accesses to DATA_REG,
+ * 300ns delay between access to ADDR_REG and DATA_REG
+ * OE, WE MUST NOT be changed during these intervals
+ */
+#if defined(UDELAY)
+#define isp116x_delay(h,d) udelay(d)
+#else
+#define isp116x_delay(h,d) do {} while (0)
+#endif
+
+static inline void isp116x_write_addr(struct isp116x *isp116x, unsigned reg)
+{
+ writew(reg & 0xff, isp116x->addr_reg);
+ isp116x_delay(isp116x, UDELAY);
+}
+
+static inline void isp116x_write_data16(struct isp116x *isp116x, u16 val)
+{
+ writew(val, isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+}
+
+static inline void isp116x_raw_write_data16(struct isp116x *isp116x, u16 val)
+{
+ __raw_writew(val, isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+}
+
+static inline u16 isp116x_read_data16(struct isp116x *isp116x)
+{
+ u16 val;
+
+ val = readw(isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+ return val;
+}
+
+static inline u16 isp116x_raw_read_data16(struct isp116x *isp116x)
+{
+ u16 val;
+
+ val = __raw_readw(isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+ return val;
+}
+
+static inline void isp116x_write_data32(struct isp116x *isp116x, u32 val)
+{
+ writew(val & 0xffff, isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+ writew(val >> 16, isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+}
+
+static inline u32 isp116x_read_data32(struct isp116x *isp116x)
+{
+ u32 val;
+
+ val = (u32) readw(isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+ val |= ((u32) readw(isp116x->data_reg)) << 16;
+ isp116x_delay(isp116x, UDELAY);
+ return val;
+}
+
+/* Let's keep register access functions out of line. Hint:
+ we wait at least 150 ns at every access.
+*/
+static u16 isp116x_read_reg16(struct isp116x *isp116x, unsigned reg)
+{
+ isp116x_write_addr(isp116x, reg);
+ return isp116x_read_data16(isp116x);
+}
+
+static u32 isp116x_read_reg32(struct isp116x *isp116x, unsigned reg)
+{
+ isp116x_write_addr(isp116x, reg);
+ return isp116x_read_data32(isp116x);
+}
+
+static void isp116x_write_reg16(struct isp116x *isp116x, unsigned reg,
+ unsigned val)
+{
+ isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET);
+ isp116x_write_data16(isp116x, (u16) (val & 0xffff));
+}
+
+static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg,
+ unsigned val)
+{
+ isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET);
+ isp116x_write_data32(isp116x, (u32) val);
+}
+
+/* --- USB HUB constants (not OHCI-specific; see hub.h) -------------------- */
+
+/* destination of request */
+#define RH_INTERFACE 0x01
+#define RH_ENDPOINT 0x02
+#define RH_OTHER 0x03
+
+#define RH_CLASS 0x20
+#define RH_VENDOR 0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
+#define RH_SET_ADDRESS 0x0500
+#define RH_GET_DESCRIPTOR 0x0680
+#define RH_SET_DESCRIPTOR 0x0700
+#define RH_GET_CONFIGURATION 0x0880
+#define RH_SET_CONFIGURATION 0x0900
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP 0x2000
+
+/* Hub port features */
+#define RH_PORT_CONNECTION 0x00
+#define RH_PORT_ENABLE 0x01
+#define RH_PORT_SUSPEND 0x02
+#define RH_PORT_OVER_CURRENT 0x03
+#define RH_PORT_RESET 0x04
+#define RH_PORT_POWER 0x08
+#define RH_PORT_LOW_SPEED 0x09
+
+#define RH_C_PORT_CONNECTION 0x10
+#define RH_C_PORT_ENABLE 0x11
+#define RH_C_PORT_SUSPEND 0x12
+#define RH_C_PORT_OVER_CURRENT 0x13
+#define RH_C_PORT_RESET 0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER 0x00
+#define RH_C_HUB_OVER_CURRENT 0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL 0x01
+
+#define RH_ACK 0x01
+#define RH_REQ_ERR -1
+#define RH_NACK 0x00
--- /dev/null
+#ifndef __UBOOT_SL811_H
+#define __UBOOT_SL811_H
+
+#undef SL811_DEBUG
+
+#ifdef SL811_DEBUG
+ #define PDEBUG(level, fmt, args...) \
+ if (debug >= (level)) printf("[%s:%d] " fmt, \
+ __PRETTY_FUNCTION__, __LINE__ , ## args)
+#else
+ #define PDEBUG(level, fmt, args...) do {} while(0)
+#endif
+
+/* Sl811 host control register */
+#define SL811_CTRL_A 0x00
+#define SL811_ADDR_A 0x01
+#define SL811_LEN_A 0x02
+#define SL811_STS_A 0x03 /* read */
+#define SL811_PIDEP_A 0x03 /* write */
+#define SL811_CNT_A 0x04 /* read */
+#define SL811_DEV_A 0x04 /* write */
+#define SL811_CTRL1 0x05
+#define SL811_INTR 0x06
+#define SL811_CTRL_B 0x08
+#define SL811_ADDR_B 0x09
+#define SL811_LEN_B 0x0A
+#define SL811_STS_B 0x0B /* read */
+#define SL811_PIDEP_B 0x0B /* write */
+#define SL811_CNT_B 0x0C /* read */
+#define SL811_DEV_B 0x0C /* write */
+#define SL811_INTRSTS 0x0D /* write clears bitwise */
+#define SL811_HWREV 0x0E /* read */
+#define SL811_SOFLOW 0x0E /* write */
+#define SL811_SOFCNTDIV 0x0F /* read */
+#define SL811_CTRL2 0x0F /* write */
+
+/* USB control register bits (addr 0x00 and addr 0x08) */
+#define SL811_USB_CTRL_ARM 0x01
+#define SL811_USB_CTRL_ENABLE 0x02
+#define SL811_USB_CTRL_DIR_OUT 0x04
+#define SL811_USB_CTRL_ISO 0x10
+#define SL811_USB_CTRL_SOF 0x20
+#define SL811_USB_CTRL_TOGGLE_1 0x40
+#define SL811_USB_CTRL_PREAMBLE 0x80
+
+/* USB status register bits (addr 0x03 and addr 0x0B) */
+#define SL811_USB_STS_ACK 0x01
+#define SL811_USB_STS_ERROR 0x02
+#define SL811_USB_STS_TIMEOUT 0x04
+#define SL811_USB_STS_TOGGLE_1 0x08
+#define SL811_USB_STS_SETUP 0x10
+#define SL811_USB_STS_OVERFLOW 0x20
+#define SL811_USB_STS_NAK 0x40
+#define SL811_USB_STS_STALL 0x80
+
+/* Control register 1 bits (addr 0x05) */
+#define SL811_CTRL1_SOF 0x01
+#define SL811_CTRL1_RESET 0x08
+#define SL811_CTRL1_JKSTATE 0x10
+#define SL811_CTRL1_SPEED_LOW 0x20
+#define SL811_CTRL1_SUSPEND 0x40
+
+/* Interrut enable (addr 0x06) and interrupt status register bits (addr 0x0D) */
+#define SL811_INTR_DONE_A 0x01
+#define SL811_INTR_DONE_B 0x02
+#define SL811_INTR_SOF 0x10
+#define SL811_INTR_INSRMV 0x20
+#define SL811_INTR_DETECT 0x40
+#define SL811_INTR_NOTPRESENT 0x40
+#define SL811_INTR_SPEED_FULL 0x80 /* only in status reg */
+
+/* HW rev and SOF lo register bits (addr 0x0E) */
+#define SL811_HWR_HWREV 0xF0
+
+/* SOF counter and control reg 2 (addr 0x0F) */
+#define SL811_CTL2_SOFHI 0x3F
+#define SL811_CTL2_DSWAP 0x40
+#define SL811_CTL2_HOST 0x80
+
+/* Set up for 1-ms SOF time. */
+#define SL811_12M_LOW 0xE0
+#define SL811_12M_HI 0x2E
+
+#define SL811_DATA_START 0x10
+#define SL811_DATA_LIMIT 240
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
+#define RH_SET_ADDRESS 0x0500
+#define RH_GET_DESCRIPTOR 0x0680
+#define RH_SET_DESCRIPTOR 0x0700
+#define RH_GET_CONFIGURATION 0x0880
+#define RH_SET_CONFIGURATION 0x0900
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
+
+
+#define PIDEP(pid, ep) (((pid) & 0x0f) << 4 | (ep))
+
+#endif /* __UBOOT_SL811_H */
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This code is based on linux driver for sl811hs chip, source at
+ * drivers/usb/host/sl811.c:
+ *
+ * SL811 Host Controller Interface driver for USB.
+ *
+ * Copyright (c) 2003/06, Courage Co., Ltd.
+ *
+ * Based on:
+ * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap,
+ * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber,
+ * Adam Richter, Gregory P. Smith;
+ * 2.Original SL811 driver (hc_sl811.o) by Pei Liu <pbl@cypress.com>
+ * 3.Rewrited as sl811.o by Yin Aihua <yinah:couragetech.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#ifdef CONFIG_USB_SL811HS
+#include <mpc8xx.h>
+#include <usb.h>
+#include "sl811.h"
+
+#include "../../board/kup/common/kup.h"
+
+#ifdef __PPC__
+# define EIEIO __asm__ volatile ("eieio")
+#else
+# define EIEIO /* nothing */
+#endif
+
+#define SL811_ADR (0x50000000)
+#define SL811_DAT (0x50000001)
+
+#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
+
+#ifdef SL811_DEBUG
+static int debug = 9;
+#endif
+
+static int root_hub_devnum = 0;
+static struct usb_port_status rh_status = { 0 };/* root hub port status */
+
+static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
+ void *data, int buf_len, struct devrequest *cmd);
+
+static void sl811_write (__u8 index, __u8 data)
+{
+ *(volatile unsigned char *) (SL811_ADR) = index;
+ EIEIO;
+ *(volatile unsigned char *) (SL811_DAT) = data;
+ EIEIO;
+}
+
+static __u8 sl811_read (__u8 index)
+{
+ __u8 data;
+
+ *(volatile unsigned char *) (SL811_ADR) = index;
+ EIEIO;
+ data = *(volatile unsigned char *) (SL811_DAT);
+ EIEIO;
+ return (data);
+}
+
+/*
+ * Read consecutive bytes of data from the SL811H/SL11H buffer
+ */
+static void inline sl811_read_buf(__u8 offset, __u8 *buf, __u8 size)
+{
+ *(volatile unsigned char *) (SL811_ADR) = offset;
+ EIEIO;
+ while (size--) {
+ *buf++ = *(volatile unsigned char *) (SL811_DAT);
+ EIEIO;
+ }
+}
+
+/*
+ * Write consecutive bytes of data to the SL811H/SL11H buffer
+ */
+static void inline sl811_write_buf(__u8 offset, __u8 *buf, __u8 size)
+{
+ *(volatile unsigned char *) (SL811_ADR) = offset;
+ EIEIO;
+ while (size--) {
+ *(volatile unsigned char *) (SL811_DAT) = *buf++;
+ EIEIO;
+ }
+}
+
+int usb_init_kup4x (void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ int i;
+ unsigned char tmp;
+
+ memctl = &immap->im_memctl;
+ memctl->memc_or7 = 0xFFFF8726;
+ memctl->memc_br7 = 0x50000401; /* start at 0x50000000 */
+ /* BP 14 low = USB ON */
+ immap->im_cpm.cp_pbdat &= ~(BP_USB_VCC);
+ /* PB 14 nomal port */
+ immap->im_cpm.cp_pbpar &= ~(BP_USB_VCC);
+ /* output */
+ immap->im_cpm.cp_pbdir |= (BP_USB_VCC);
+
+ puts ("USB: ");
+
+ for (i = 0x10; i < 0xff; i++) {
+ sl811_write(i, i);
+ tmp = (sl811_read(i));
+ if (tmp != i) {
+ printf ("SL811 compare error index=0x%02x read=0x%02x\n", i, tmp);
+ return (-1);
+ }
+ }
+ printf ("SL811 ready\n");
+ return (0);
+}
+
+/*
+ * This function resets SL811HS controller and detects the speed of
+ * the connecting device
+ *
+ * Return: 0 = no device attached; 1 = USB device attached
+ */
+static int sl811_hc_reset(void)
+{
+ int status ;
+
+ sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI);
+ sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
+
+ mdelay(20);
+
+ /* Disable hardware SOF generation, clear all irq status. */
+ sl811_write(SL811_CTRL1, 0);
+ mdelay(2);
+ sl811_write(SL811_INTRSTS, 0xff);
+ status = sl811_read(SL811_INTRSTS);
+
+ if (status & SL811_INTR_NOTPRESENT) {
+ /* Device is not present */
+ PDEBUG(0, "Device not present\n");
+ rh_status.wPortStatus &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE);
+ rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION;
+ sl811_write(SL811_INTR, SL811_INTR_INSRMV);
+ return 0;
+ }
+
+ /* Send SOF to address 0, endpoint 0. */
+ sl811_write(SL811_LEN_B, 0);
+ sl811_write(SL811_PIDEP_B, PIDEP(USB_PID_SOF, 0));
+ sl811_write(SL811_DEV_B, 0x00);
+ sl811_write(SL811_SOFLOW, SL811_12M_LOW);
+
+ if (status & SL811_INTR_SPEED_FULL) {
+ /* full speed device connect directly to root hub */
+ PDEBUG (0, "Full speed Device attached\n");
+
+ sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
+ mdelay(20);
+ sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI);
+ sl811_write(SL811_CTRL1, SL811_CTRL1_SOF);
+
+ /* start the SOF or EOP */
+ sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM);
+ rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION;
+ rh_status.wPortStatus &= ~USB_PORT_STAT_LOW_SPEED;
+ mdelay(2);
+ sl811_write(SL811_INTRSTS, 0xff);
+ } else {
+ /* slow speed device connect directly to root-hub */
+ PDEBUG(0, "Low speed Device attached\n");
+
+ sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
+ mdelay(20);
+ sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_CTL2_DSWAP | SL811_12M_HI);
+ sl811_write(SL811_CTRL1, SL811_CTRL1_SPEED_LOW | SL811_CTRL1_SOF);
+
+ /* start the SOF or EOP */
+ sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM);
+ rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION | USB_PORT_STAT_LOW_SPEED;
+ mdelay(2);
+ sl811_write(SL811_INTRSTS, 0xff);
+ }
+
+ rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION;
+ sl811_write(SL811_INTR, /*SL811_INTR_INSRMV*/SL811_INTR_DONE_A);
+
+ return 1;
+}
+
+int usb_lowlevel_init(void)
+{
+ root_hub_devnum = 0;
+ sl811_hc_reset();
+ return 0;
+}
+
+int usb_lowlevel_stop(void)
+{
+ sl811_hc_reset();
+ return 0;
+}
+
+static int calc_needed_buswidth(int bytes, int need_preamble)
+{
+ return !need_preamble ? bytes * 8 + 256 : 8 * 8 * bytes + 2048;
+}
+
+static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *buffer, int len)
+{
+ __u8 ctrl = SL811_USB_CTRL_ARM | SL811_USB_CTRL_ENABLE;
+ __u16 status = 0;
+ int err = 0, time_start = get_timer(0);
+ int need_preamble = !(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) &&
+ usb_pipeslow(pipe);
+
+ if (len > 239)
+ return -1;
+
+ if (usb_pipeout(pipe))
+ ctrl |= SL811_USB_CTRL_DIR_OUT;
+ if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)))
+ ctrl |= SL811_USB_CTRL_TOGGLE_1;
+ if (need_preamble)
+ ctrl |= SL811_USB_CTRL_PREAMBLE;
+
+ sl811_write(SL811_INTRSTS, 0xff);
+
+ while (err < 3) {
+ sl811_write(SL811_ADDR_A, 0x10);
+ sl811_write(SL811_LEN_A, len);
+ if (usb_pipeout(pipe) && len)
+ sl811_write_buf(0x10, buffer, len);
+
+ if (!(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) &&
+ sl811_read(SL811_SOFCNTDIV)*64 < calc_needed_buswidth(len, need_preamble))
+ ctrl |= SL811_USB_CTRL_SOF;
+ else
+ ctrl &= ~SL811_USB_CTRL_SOF;
+
+ sl811_write(SL811_CTRL_A, ctrl);
+ while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) {
+ if (5*CFG_HZ < get_timer(time_start)) {
+ printf("USB transmit timed out\n");
+ return -USB_ST_CRC_ERR;
+ }
+ }
+
+ sl811_write(SL811_INTRSTS, 0xff);
+ status = sl811_read(SL811_STS_A);
+
+ if (status & SL811_USB_STS_ACK) {
+ int remainder = sl811_read(SL811_CNT_A);
+ if (remainder) {
+ PDEBUG(0, "usb transfer remainder = %d\n", remainder);
+ len -= remainder;
+ }
+ if (usb_pipein(pipe) && len)
+ sl811_read_buf(0x10, buffer, len);
+ return len;
+ }
+
+ if ((status & SL811_USB_STS_NAK) == SL811_USB_STS_NAK)
+ continue;
+
+ PDEBUG(0, "usb transfer error %#x\n", (int)status);
+ err++;
+ }
+
+ err = 0;
+
+ if (status & SL811_USB_STS_ERROR)
+ err |= USB_ST_BUF_ERR;
+ if (status & SL811_USB_STS_TIMEOUT)
+ err |= USB_ST_CRC_ERR;
+ if (status & SL811_USB_STS_STALL)
+ err |= USB_ST_STALLED;
+
+ return -err;
+}
+
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len)
+{
+ int dir_out = usb_pipeout(pipe);
+ int ep = usb_pipeendpoint(pipe);
+ int max = usb_maxpacket(dev, pipe);
+ int done = 0;
+
+ PDEBUG(7, "dev = %ld pipe = %ld buf = %p size = %d dir_out = %d\n",
+ usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out);
+
+ dev->status = 0;
+
+ sl811_write(SL811_DEV_A, usb_pipedevice(pipe));
+ sl811_write(SL811_PIDEP_A, PIDEP(!dir_out ? USB_PID_IN : USB_PID_OUT, ep));
+ while (done < len) {
+ int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done,
+ max > len - done ? len - done : max);
+ if (res < 0) {
+ dev->status = -res;
+ return res;
+ }
+
+ if (!dir_out && res < max) /* short packet */
+ break;
+
+ done += res;
+ usb_dotoggle(dev, ep, dir_out);
+ }
+
+ dev->act_len = done;
+
+ return 0;
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len,struct devrequest *setup)
+{
+ int done = 0;
+ int devnum = usb_pipedevice(pipe);
+ int ep = usb_pipeendpoint(pipe);
+
+ dev->status = 0;
+
+ if (devnum == root_hub_devnum)
+ return sl811_rh_submit_urb(dev, pipe, buffer, len, setup);
+
+ PDEBUG(7, "dev = %d pipe = %ld buf = %p size = %d rt = %#x req = %#x bus = %i\n",
+ devnum, ep, buffer, len, (int)setup->requesttype,
+ (int)setup->request, sl811_read(SL811_SOFCNTDIV)*64);
+
+ sl811_write(SL811_DEV_A, devnum);
+ sl811_write(SL811_PIDEP_A, PIDEP(USB_PID_SETUP, ep));
+ /* setup phase */
+ usb_settoggle(dev, ep, 1, 0);
+ if (sl811_send_packet(dev, usb_sndctrlpipe(dev, ep),
+ (__u8*)setup, sizeof(*setup)) == sizeof(*setup)) {
+ int dir_in = usb_pipein(pipe);
+ int max = usb_maxpacket(dev, pipe);
+
+ /* data phase */
+ sl811_write(SL811_PIDEP_A,
+ PIDEP(dir_in ? USB_PID_IN : USB_PID_OUT, ep));
+ usb_settoggle(dev, ep, usb_pipeout(pipe), 1);
+ while (done < len) {
+ int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done,
+ max > len - done ? len - done : max);
+ if (res < 0) {
+ PDEBUG(0, "status data failed!\n");
+ dev->status = -res;
+ return 0;
+ }
+ done += res;
+ usb_dotoggle(dev, ep, usb_pipeout(pipe));
+ if (dir_in && res < max) /* short packet */
+ break;
+ }
+
+ /* status phase */
+ sl811_write(SL811_PIDEP_A,
+ PIDEP(!dir_in ? USB_PID_IN : USB_PID_OUT, ep));
+ usb_settoggle(dev, ep, !usb_pipeout(pipe), 1);
+ if (sl811_send_packet(dev,
+ !dir_in ? usb_rcvctrlpipe(dev, ep) :
+ usb_sndctrlpipe(dev, ep),
+ 0, 0) < 0) {
+ PDEBUG(0, "status phase failed!\n");
+ dev->status = -1;
+ }
+ } else {
+ PDEBUG(0, "setup phase failed!\n");
+ dev->status = -1;
+ }
+
+ dev->act_len = done;
+
+ return done;
+}
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len, int interval)
+{
+ PDEBUG(0, "dev = %p pipe = %#lx buf = %p size = %d int = %d\n", dev, pipe,
+ buffer, len, interval);
+ return -1;
+}
+
+/*
+ * SL811 Virtual Root Hub
+ */
+
+/* Device descriptor */
+static __u8 sl811_rh_dev_des[] =
+{
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x10, /* __u16 bcdUSB; v1.1 */
+ 0x01,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x00, /* __u8 iManufacturer; */
+ 0x02, /* __u8 iProduct; */
+ 0x01, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+/* Configuration descriptor */
+static __u8 sl811_rh_config_des[] =
+{
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes;
+ Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup,
+ 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x08, /* __u16 ep_wMaxPacketSize; */
+ 0x00,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+/* root hub class descriptor*/
+static __u8 sl811_rh_hub_des[] =
+{
+ 0x09, /* __u8 bLength; */
+ 0x29, /* __u8 bDescriptorType; Hub-descriptor */
+ 0x01, /* __u8 bNbrPorts; */
+ 0x00, /* __u16 wHubCharacteristics; */
+ 0x00,
+ 0x50, /* __u8 bPwrOn2pwrGood; 2ms */
+ 0x00, /* __u8 bHubContrCurrent; 0 mA */
+ 0xfc, /* __u8 DeviceRemovable; *** 7 Ports max *** */
+ 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */
+};
+
+/*
+ * helper routine for returning string descriptors in UTF-16LE
+ * input can actually be ISO-8859-1; ASCII is its 7-bit subset
+ */
+static int ascii2utf (char *s, u8 *utf, int utfmax)
+{
+ int retval;
+
+ for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) {
+ *utf++ = *s++;
+ *utf++ = 0;
+ }
+ return retval;
+}
+
+/*
+ * root_hub_string is used by each host controller's root hub code,
+ * so that they're identified consistently throughout the system.
+ */
+static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len)
+{
+ char buf [30];
+
+ /* assert (len > (2 * (sizeof (buf) + 1)));
+ assert (strlen (type) <= 8);*/
+
+ /* language ids */
+ if (id == 0) {
+ *data++ = 4; *data++ = 3; /* 4 bytes data */
+ *data++ = 0; *data++ = 0; /* some language id */
+ return 4;
+
+ /* serial number */
+ } else if (id == 1) {
+ sprintf (buf, "%#x", serial);
+
+ /* product description */
+ } else if (id == 2) {
+ sprintf (buf, "USB %s Root Hub", type);
+
+ /* id 3 == vendor description */
+
+ /* unsupported IDs --> "stall" */
+ } else
+ return 0;
+
+ ascii2utf (buf, data + 2, len - 2);
+ data [0] = 2 + strlen(buf) * 2;
+ data [1] = 3;
+ return data [0];
+}
+
+/* helper macro */
+#define OK(x) len = (x); break
+
+/*
+ * This function handles all USB request to the the virtual root hub
+ */
+static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
+ void *data, int buf_len, struct devrequest *cmd)
+{
+ __u8 data_buf[16];
+ __u8 *bufp = data_buf;
+ int len = 0;
+ int status = 0;
+
+ __u16 bmRType_bReq;
+ __u16 wValue;
+ __u16 wIndex;
+ __u16 wLength;
+
+ if (usb_pipeint(pipe)) {
+ PDEBUG(0, "interrupt transfer unimplemented!\n");
+ return 0;
+ }
+
+ bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+ wValue = le16_to_cpu (cmd->value);
+ wIndex = le16_to_cpu (cmd->index);
+ wLength = le16_to_cpu (cmd->length);
+
+ PDEBUG(5, "submit rh urb, req = %d(%x) val = %#x index = %#x len=%d\n",
+ bmRType_bReq, bmRType_bReq, wValue, wIndex, wLength);
+
+ /* Request Destination:
+ without flags: Device,
+ USB_RECIP_INTERFACE: interface,
+ USB_RECIP_ENDPOINT: endpoint,
+ USB_TYPE_CLASS means HUB here,
+ USB_RECIP_OTHER | USB_TYPE_CLASS almost ever means HUB_PORT here
+ */
+ switch (bmRType_bReq) {
+ case RH_GET_STATUS:
+ *(__u16 *)bufp = cpu_to_le16(1);
+ OK(2);
+
+ case RH_GET_STATUS | USB_RECIP_INTERFACE:
+ *(__u16 *)bufp = cpu_to_le16(0);
+ OK(2);
+
+ case RH_GET_STATUS | USB_RECIP_ENDPOINT:
+ *(__u16 *)bufp = cpu_to_le16(0);
+ OK(2);
+
+ case RH_GET_STATUS | USB_TYPE_CLASS:
+ *(__u32 *)bufp = cpu_to_le32(0);
+ OK(4);
+
+ case RH_GET_STATUS | USB_RECIP_OTHER | USB_TYPE_CLASS:
+ *(__u32 *)bufp = cpu_to_le32(rh_status.wPortChange<<16 | rh_status.wPortStatus);
+ OK(4);
+
+ case RH_CLEAR_FEATURE | USB_RECIP_ENDPOINT:
+ switch (wValue) {
+ case 1:
+ OK(0);
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | USB_TYPE_CLASS:
+ switch (wValue) {
+ case C_HUB_LOCAL_POWER:
+ OK(0);
+
+ case C_HUB_OVER_CURRENT:
+ OK(0);
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS:
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ rh_status.wPortStatus &= ~USB_PORT_STAT_ENABLE;
+ OK(0);
+
+ case USB_PORT_FEAT_SUSPEND:
+ rh_status.wPortStatus &= ~USB_PORT_STAT_SUSPEND;
+ OK(0);
+
+ case USB_PORT_FEAT_POWER:
+ rh_status.wPortStatus &= ~USB_PORT_STAT_POWER;
+ OK(0);
+
+ case USB_PORT_FEAT_C_CONNECTION:
+ rh_status.wPortChange &= ~USB_PORT_STAT_C_CONNECTION;
+ OK(0);
+
+ case USB_PORT_FEAT_C_ENABLE:
+ rh_status.wPortChange &= ~USB_PORT_STAT_C_ENABLE;
+ OK(0);
+
+ case USB_PORT_FEAT_C_SUSPEND:
+ rh_status.wPortChange &= ~USB_PORT_STAT_C_SUSPEND;
+ OK(0);
+
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ rh_status.wPortChange &= ~USB_PORT_STAT_C_OVERCURRENT;
+ OK(0);
+
+ case USB_PORT_FEAT_C_RESET:
+ rh_status.wPortChange &= ~USB_PORT_STAT_C_RESET;
+ OK(0);
+ }
+ break;
+
+ case RH_SET_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS:
+ switch (wValue) {
+ case USB_PORT_FEAT_SUSPEND:
+ rh_status.wPortStatus |= USB_PORT_STAT_SUSPEND;
+ OK(0);
+
+ case USB_PORT_FEAT_RESET:
+ rh_status.wPortStatus |= USB_PORT_STAT_RESET;
+ rh_status.wPortChange = 0;
+ rh_status.wPortChange |= USB_PORT_STAT_C_RESET;
+ rh_status.wPortStatus &= ~USB_PORT_STAT_RESET;
+ rh_status.wPortStatus |= USB_PORT_STAT_ENABLE;
+ OK(0);
+
+ case USB_PORT_FEAT_POWER:
+ rh_status.wPortStatus |= USB_PORT_STAT_POWER;
+ OK(0);
+
+ case USB_PORT_FEAT_ENABLE:
+ rh_status.wPortStatus |= USB_PORT_STAT_ENABLE;
+ OK(0);
+ }
+ break;
+
+ case RH_SET_ADDRESS:
+ root_hub_devnum = wValue;
+ OK(0);
+
+ case RH_GET_DESCRIPTOR:
+ switch ((wValue & 0xff00) >> 8) {
+ case USB_DT_DEVICE:
+ len = sizeof(sl811_rh_dev_des);
+ bufp = sl811_rh_dev_des;
+ OK(len);
+
+ case USB_DT_CONFIG:
+ len = sizeof(sl811_rh_config_des);
+ bufp = sl811_rh_config_des;
+ OK(len);
+
+ case USB_DT_STRING:
+ len = usb_root_hub_string(wValue & 0xff, (int)(long)0, "SL811HS", data, wLength);
+ if (len > 0) {
+ bufp = data;
+ OK(len);
+ }
+
+ default:
+ status = -32;
+ }
+ break;
+
+ case RH_GET_DESCRIPTOR | USB_TYPE_CLASS:
+ len = sizeof(sl811_rh_hub_des);
+ bufp = sl811_rh_hub_des;
+ OK(len);
+
+ case RH_GET_CONFIGURATION:
+ bufp[0] = 0x01;
+ OK(1);
+
+ case RH_SET_CONFIGURATION:
+ OK(0);
+
+ default:
+ PDEBUG(1, "unsupported root hub command\n");
+ status = -32;
+ }
+
+ len = min(len, buf_len);
+ if (data != bufp)
+ memcpy(data, bufp, len);
+
+ PDEBUG(5, "len = %d, status = %d\n", len, status);
+
+ usb_dev->status = status;
+ usb_dev->act_len = len;
+
+ return status == 0 ? len : status;
+}
+
+#endif /* CONFIG_USB_SL811HS */
--- /dev/null
+/*
+ * URB OHCI HCD (Host Controller Driver) for USB on the AT91RM9200 and PCI bus.
+ *
+ * Interrupt support is added. Now, it has been tested
+ * on ULI1575 chip and works well with USB keyboard.
+ *
+ * (C) Copyright 2007
+ * Zhang Wei, Freescale Semiconductor, Inc. <wei.zhang@freescale.com>
+ *
+ * (C) Copyright 2003
+ * Gary Jennejohn, DENX Software Engineering <gj@denx.de>
+ *
+ * Note: Much of this code has been derived from Linux 2.4
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell
+ *
+ * Modified for the MP2USB by (C) Copyright 2005 Eric Benard
+ * ebenard@eukrea.com - based on s3c24x0's driver
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+/*
+ * IMPORTANT NOTES
+ * 1 - Read doc/README.generic_usb_ohci
+ * 2 - this driver is intended for use with USB Mass Storage Devices
+ * (BBB) and USB keyboard. There is NO support for Isochronous pipes!
+ * 2 - when running on a PQFP208 AT91RM9200, define CONFIG_AT91C_PQFP_UHPBUG
+ * to activate workaround for bug #41 or this driver will NOT work!
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_USB_OHCI_NEW
+
+#include <asm/byteorder.h>
+
+#if defined(CONFIG_PCI_OHCI)
+# include <pci.h>
+#endif
+
+#include <malloc.h>
+#include <usb.h>
+#include "usb_ohci.h"
+
+#ifdef CONFIG_AT91RM9200
+#include <asm/arch/hardware.h> /* needed for AT91_USB_HOST_BASE */
+#endif
+
+#if defined(CONFIG_ARM920T) || \
+ defined(CONFIG_S3C2400) || \
+ defined(CONFIG_S3C2410) || \
+ defined(CONFIG_440EP) || \
+ defined(CONFIG_PCI_OHCI) || \
+ defined(CONFIG_MPC5200)
+# define OHCI_USE_NPS /* force NoPowerSwitching mode */
+#endif
+
+#undef OHCI_VERBOSE_DEBUG /* not always helpful */
+#undef DEBUG
+#undef SHOW_INFO
+#undef OHCI_FILL_TRACE
+
+/* For initializing controller (mask in an HCFS mode too) */
+#define OHCI_CONTROL_INIT \
+ (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
+
+/*
+ * e.g. PCI controllers need this
+ */
+#ifdef CFG_OHCI_SWAP_REG_ACCESS
+# define readl(a) __swap_32(*((vu_long *)(a)))
+# define writel(a, b) (*((vu_long *)(b)) = __swap_32((vu_long)a))
+#else
+# define readl(a) (*((vu_long *)(a)))
+# define writel(a, b) (*((vu_long *)(b)) = ((vu_long)a))
+#endif /* CFG_OHCI_SWAP_REG_ACCESS */
+
+#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
+
+#ifdef CONFIG_PCI_OHCI
+static struct pci_device_id ohci_pci_ids[] = {
+ {0x10b9, 0x5237}, /* ULI1575 PCI OHCI module ids */
+ {0x1033, 0x0035}, /* NEC PCI OHCI module ids */
+ /* Please add supported PCI OHCI controller ids here */
+ {0, 0}
+};
+#endif
+
+#ifdef DEBUG
+#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
+#else
+#define dbg(format, arg...) do {} while(0)
+#endif /* DEBUG */
+#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
+#undef SHOW_INFO
+#ifdef SHOW_INFO
+#define info(format, arg...) printf("INFO: " format "\n", ## arg)
+#else
+#define info(format, arg...) do {} while(0)
+#endif
+
+#ifdef CFG_OHCI_BE_CONTROLLER
+# define m16_swap(x) cpu_to_be16(x)
+# define m32_swap(x) cpu_to_be32(x)
+#else
+# define m16_swap(x) cpu_to_le16(x)
+# define m32_swap(x) cpu_to_le32(x)
+#endif /* CFG_OHCI_BE_CONTROLLER */
+
+/* global ohci_t */
+static ohci_t gohci;
+/* this must be aligned to a 256 byte boundary */
+struct ohci_hcca ghcca[1];
+/* a pointer to the aligned storage */
+struct ohci_hcca *phcca;
+/* this allocates EDs for all possible endpoints */
+struct ohci_device ohci_dev;
+/* RHSC flag */
+int got_rhsc;
+/* device which was disconnected */
+struct usb_device *devgone;
+
+/*-------------------------------------------------------------------------*/
+
+/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
+ * The erratum (#4) description is incorrect. AMD's workaround waits
+ * till some bits (mostly reserved) are clear; ok for all revs.
+ */
+#define OHCI_QUIRK_AMD756 0xabcd
+#define read_roothub(hc, register, mask) ({ \
+ u32 temp = readl (&hc->regs->roothub.register); \
+ if (hc->flags & OHCI_QUIRK_AMD756) \
+ while (temp & mask) \
+ temp = readl (&hc->regs->roothub.register); \
+ temp; })
+
+static u32 roothub_a (struct ohci *hc)
+ { return read_roothub (hc, a, 0xfc0fe000); }
+static inline u32 roothub_b (struct ohci *hc)
+ { return readl (&hc->regs->roothub.b); }
+static inline u32 roothub_status (struct ohci *hc)
+ { return readl (&hc->regs->roothub.status); }
+static u32 roothub_portstatus (struct ohci *hc, int i)
+ { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
+
+/* forward declaration */
+static int hc_interrupt (void);
+static void
+td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
+ int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
+
+/*-------------------------------------------------------------------------*
+ * URB support functions
+ *-------------------------------------------------------------------------*/
+
+/* free HCD-private data associated with this URB */
+
+static void urb_free_priv (urb_priv_t * urb)
+{
+ int i;
+ int last;
+ struct td * td;
+
+ last = urb->length - 1;
+ if (last >= 0) {
+ for (i = 0; i <= last; i++) {
+ td = urb->td[i];
+ if (td) {
+ td->usb_dev = NULL;
+ urb->td[i] = NULL;
+ }
+ }
+ }
+ free(urb);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+static int sohci_get_current_frame_number (struct usb_device * dev);
+
+/* debug| print the main components of an URB
+ * small: 0) header + data packets 1) just header */
+
+static void pkt_print (urb_priv_t *purb, struct usb_device * dev,
+ unsigned long pipe, void * buffer,
+ int transfer_len, struct devrequest * setup, char * str, int small)
+{
+ dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
+ str,
+ sohci_get_current_frame_number (dev),
+ usb_pipedevice (pipe),
+ usb_pipeendpoint (pipe),
+ usb_pipeout (pipe)? 'O': 'I',
+ usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
+ (usb_pipecontrol (pipe)? "CTRL": "BULK"),
+ (purb ? purb->actual_length : 0),
+ transfer_len, dev->status);
+#ifdef OHCI_VERBOSE_DEBUG
+ if (!small) {
+ int i, len;
+
+ if (usb_pipecontrol (pipe)) {
+ printf (__FILE__ ": cmd(8):");
+ for (i = 0; i < 8 ; i++)
+ printf (" %02x", ((__u8 *) setup) [i]);
+ printf ("\n");
+ }
+ if (transfer_len > 0 && buffer) {
+ printf (__FILE__ ": data(%d/%d):",
+ (purb ? purb->actual_length : 0),
+ transfer_len);
+ len = usb_pipeout (pipe)?
+ transfer_len:
+ (purb ? purb->actual_length : 0);
+ for (i = 0; i < 16 && i < len; i++)
+ printf (" %02x", ((__u8 *) buffer) [i]);
+ printf ("%s\n", i < len? "...": "");
+ }
+ }
+#endif
+}
+
+/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
+void ep_print_int_eds (ohci_t *ohci, char * str) {
+ int i, j;
+ __u32 * ed_p;
+ for (i= 0; i < 32; i++) {
+ j = 5;
+ ed_p = &(ohci->hcca->int_table [i]);
+ if (*ed_p == 0)
+ continue;
+ printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
+ while (*ed_p != 0 && j--) {
+ ed_t *ed = (ed_t *)m32_swap(ed_p);
+ printf (" ed: %4x;", ed->hwINFO);
+ ed_p = &ed->hwNextED;
+ }
+ printf ("\n");
+ }
+}
+
+static void ohci_dump_intr_mask (char *label, __u32 mask)
+{
+ dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
+ label,
+ mask,
+ (mask & OHCI_INTR_MIE) ? " MIE" : "",
+ (mask & OHCI_INTR_OC) ? " OC" : "",
+ (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
+ (mask & OHCI_INTR_FNO) ? " FNO" : "",
+ (mask & OHCI_INTR_UE) ? " UE" : "",
+ (mask & OHCI_INTR_RD) ? " RD" : "",
+ (mask & OHCI_INTR_SF) ? " SF" : "",
+ (mask & OHCI_INTR_WDH) ? " WDH" : "",
+ (mask & OHCI_INTR_SO) ? " SO" : ""
+ );
+}
+
+static void maybe_print_eds (char *label, __u32 value)
+{
+ ed_t *edp = (ed_t *)value;
+
+ if (value) {
+ dbg ("%s %08x", label, value);
+ dbg ("%08x", edp->hwINFO);
+ dbg ("%08x", edp->hwTailP);
+ dbg ("%08x", edp->hwHeadP);
+ dbg ("%08x", edp->hwNextED);
+ }
+}
+
+static char * hcfs2string (int state)
+{
+ switch (state) {
+ case OHCI_USB_RESET: return "reset";
+ case OHCI_USB_RESUME: return "resume";
+ case OHCI_USB_OPER: return "operational";
+ case OHCI_USB_SUSPEND: return "suspend";
+ }
+ return "?";
+}
+
+/* dump control and status registers */
+static void ohci_dump_status (ohci_t *controller)
+{
+ struct ohci_regs *regs = controller->regs;
+ __u32 temp;
+
+ temp = readl (®s->revision) & 0xff;
+ if (temp != 0x10)
+ dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
+
+ temp = readl (®s->control);
+ dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
+ (temp & OHCI_CTRL_RWE) ? " RWE" : "",
+ (temp & OHCI_CTRL_RWC) ? " RWC" : "",
+ (temp & OHCI_CTRL_IR) ? " IR" : "",
+ hcfs2string (temp & OHCI_CTRL_HCFS),
+ (temp & OHCI_CTRL_BLE) ? " BLE" : "",
+ (temp & OHCI_CTRL_CLE) ? " CLE" : "",
+ (temp & OHCI_CTRL_IE) ? " IE" : "",
+ (temp & OHCI_CTRL_PLE) ? " PLE" : "",
+ temp & OHCI_CTRL_CBSR
+ );
+
+ temp = readl (®s->cmdstatus);
+ dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
+ (temp & OHCI_SOC) >> 16,
+ (temp & OHCI_OCR) ? " OCR" : "",
+ (temp & OHCI_BLF) ? " BLF" : "",
+ (temp & OHCI_CLF) ? " CLF" : "",
+ (temp & OHCI_HCR) ? " HCR" : ""
+ );
+
+ ohci_dump_intr_mask ("intrstatus", readl (®s->intrstatus));
+ ohci_dump_intr_mask ("intrenable", readl (®s->intrenable));
+
+ maybe_print_eds ("ed_periodcurrent", readl (®s->ed_periodcurrent));
+
+ maybe_print_eds ("ed_controlhead", readl (®s->ed_controlhead));
+ maybe_print_eds ("ed_controlcurrent", readl (®s->ed_controlcurrent));
+
+ maybe_print_eds ("ed_bulkhead", readl (®s->ed_bulkhead));
+ maybe_print_eds ("ed_bulkcurrent", readl (®s->ed_bulkcurrent));
+
+ maybe_print_eds ("donehead", readl (®s->donehead));
+}
+
+static void ohci_dump_roothub (ohci_t *controller, int verbose)
+{
+ __u32 temp, ndp, i;
+
+ temp = roothub_a (controller);
+ ndp = (temp & RH_A_NDP);
+#ifdef CONFIG_AT91C_PQFP_UHPBUG
+ ndp = (ndp == 2) ? 1:0;
+#endif
+ if (verbose) {
+ dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
+ ((temp & RH_A_POTPGT) >> 24) & 0xff,
+ (temp & RH_A_NOCP) ? " NOCP" : "",
+ (temp & RH_A_OCPM) ? " OCPM" : "",
+ (temp & RH_A_DT) ? " DT" : "",
+ (temp & RH_A_NPS) ? " NPS" : "",
+ (temp & RH_A_PSM) ? " PSM" : "",
+ ndp
+ );
+ temp = roothub_b (controller);
+ dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
+ temp,
+ (temp & RH_B_PPCM) >> 16,
+ (temp & RH_B_DR)
+ );
+ temp = roothub_status (controller);
+ dbg ("roothub.status: %08x%s%s%s%s%s%s",
+ temp,
+ (temp & RH_HS_CRWE) ? " CRWE" : "",
+ (temp & RH_HS_OCIC) ? " OCIC" : "",
+ (temp & RH_HS_LPSC) ? " LPSC" : "",
+ (temp & RH_HS_DRWE) ? " DRWE" : "",
+ (temp & RH_HS_OCI) ? " OCI" : "",
+ (temp & RH_HS_LPS) ? " LPS" : ""
+ );
+ }
+
+ for (i = 0; i < ndp; i++) {
+ temp = roothub_portstatus (controller, i);
+ dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
+ i,
+ temp,
+ (temp & RH_PS_PRSC) ? " PRSC" : "",
+ (temp & RH_PS_OCIC) ? " OCIC" : "",
+ (temp & RH_PS_PSSC) ? " PSSC" : "",
+ (temp & RH_PS_PESC) ? " PESC" : "",
+ (temp & RH_PS_CSC) ? " CSC" : "",
+
+ (temp & RH_PS_LSDA) ? " LSDA" : "",
+ (temp & RH_PS_PPS) ? " PPS" : "",
+ (temp & RH_PS_PRS) ? " PRS" : "",
+ (temp & RH_PS_POCI) ? " POCI" : "",
+ (temp & RH_PS_PSS) ? " PSS" : "",
+
+ (temp & RH_PS_PES) ? " PES" : "",
+ (temp & RH_PS_CCS) ? " CCS" : ""
+ );
+ }
+}
+
+static void ohci_dump (ohci_t *controller, int verbose)
+{
+ dbg ("OHCI controller usb-%s state", controller->slot_name);
+
+ /* dumps some of the state we know about */
+ ohci_dump_status (controller);
+ if (verbose)
+ ep_print_int_eds (controller, "hcca");
+ dbg ("hcca frame #%04x", controller->hcca->frame_no);
+ ohci_dump_roothub (controller, 1);
+
+#endif /* DEBUG */
+
+/*-------------------------------------------------------------------------*
+ * Interface functions (URB)
+ *-------------------------------------------------------------------------*/
+
+/* get a transfer request */
+
+int sohci_submit_job(urb_priv_t *urb, struct devrequest *setup)
+{
+ ohci_t *ohci;
+ ed_t * ed;
+ urb_priv_t *purb_priv = urb;
+ int i, size = 0;
+ struct usb_device *dev = urb->dev;
+ unsigned long pipe = urb->pipe;
+ void *buffer = urb->transfer_buffer;
+ int transfer_len = urb->transfer_buffer_length;
+ int interval = urb->interval;
+
+ ohci = &gohci;
+
+ /* when controller's hung, permit only roothub cleanup attempts
+ * such as powering down ports */
+ if (ohci->disabled) {
+ err("sohci_submit_job: EPIPE");
+ return -1;
+ }
+
+ /* we're about to begin a new transaction here so mark the URB unfinished */
+ urb->finished = 0;
+
+ /* every endpoint has a ed, locate and fill it */
+ if (!(ed = ep_add_ed (dev, pipe, interval, 1))) {
+ err("sohci_submit_job: ENOMEM");
+ return -1;
+ }
+
+ /* for the private part of the URB we need the number of TDs (size) */
+ switch (usb_pipetype (pipe)) {
+ case PIPE_BULK: /* one TD for every 4096 Byte */
+ size = (transfer_len - 1) / 4096 + 1;
+ break;
+ case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
+ size = (transfer_len == 0)? 2:
+ (transfer_len - 1) / 4096 + 3;
+ break;
+ case PIPE_INTERRUPT: /* 1 TD */
+ size = 1;
+ break;
+ }
+
+ ed->purb = urb;
+
+ if (size >= (N_URB_TD - 1)) {
+ err("need %d TDs, only have %d", size, N_URB_TD);
+ return -1;
+ }
+ purb_priv->pipe = pipe;
+
+ /* fill the private part of the URB */
+ purb_priv->length = size;
+ purb_priv->ed = ed;
+ purb_priv->actual_length = 0;
+
+ /* allocate the TDs */
+ /* note that td[0] was allocated in ep_add_ed */
+ for (i = 0; i < size; i++) {
+ purb_priv->td[i] = td_alloc (dev);
+ if (!purb_priv->td[i]) {
+ purb_priv->length = i;
+ urb_free_priv (purb_priv);
+ err("sohci_submit_job: ENOMEM");
+ return -1;
+ }
+ }
+
+ if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
+ urb_free_priv (purb_priv);
+ err("sohci_submit_job: EINVAL");
+ return -1;
+ }
+
+ /* link the ed into a chain if is not already */
+ if (ed->state != ED_OPER)
+ ep_link (ohci, ed);
+
+ /* fill the TDs and link it to the ed */
+ td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
+
+ return 0;
+}
+
+static inline int sohci_return_job(struct ohci *hc, urb_priv_t *urb)
+{
+ struct ohci_regs *regs = hc->regs;
+
+ switch (usb_pipetype (urb->pipe)) {
+ case PIPE_INTERRUPT:
+ /* implicitly requeued */
+ if (urb->dev->irq_handle &&
+ (urb->dev->irq_act_len = urb->actual_length)) {
+ writel (OHCI_INTR_WDH, ®s->intrenable);
+ readl (®s->intrenable); /* PCI posting flush */
+ urb->dev->irq_handle(urb->dev);
+ writel (OHCI_INTR_WDH, ®s->intrdisable);
+ readl (®s->intrdisable); /* PCI posting flush */
+ }
+ urb->actual_length = 0;
+ td_submit_job (
+ urb->dev,
+ urb->pipe,
+ urb->transfer_buffer,
+ urb->transfer_buffer_length,
+ NULL,
+ urb,
+ urb->interval);
+ break;
+ case PIPE_CONTROL:
+ case PIPE_BULK:
+ break;
+ default:
+ return 0;
+ }
+ return 1;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+/* tell us the current USB frame number */
+
+static int sohci_get_current_frame_number (struct usb_device *usb_dev)
+{
+ ohci_t *ohci = &gohci;
+
+ return m16_swap (ohci->hcca->frame_no);
+}
+#endif
+
+/*-------------------------------------------------------------------------*
+ * ED handling functions
+ *-------------------------------------------------------------------------*/
+
+/* search for the right branch to insert an interrupt ed into the int tree
+ * do some load ballancing;
+ * returns the branch and
+ * sets the interval to interval = 2^integer (ld (interval)) */
+
+static int ep_int_ballance (ohci_t * ohci, int interval, int load)
+{
+ int i, branch = 0;
+
+ /* search for the least loaded interrupt endpoint
+ * branch of all 32 branches
+ */
+ for (i = 0; i < 32; i++)
+ if (ohci->ohci_int_load [branch] > ohci->ohci_int_load [i])
+ branch = i;
+
+ branch = branch % interval;
+ for (i = branch; i < 32; i += interval)
+ ohci->ohci_int_load [i] += load;
+
+ return branch;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* 2^int( ld (inter)) */
+
+static int ep_2_n_interval (int inter)
+{
+ int i;
+ for (i = 0; ((inter >> i) > 1 ) && (i < 5); i++);
+ return 1 << i;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* the int tree is a binary tree
+ * in order to process it sequentially the indexes of the branches have to be mapped
+ * the mapping reverses the bits of a word of num_bits length */
+
+static int ep_rev (int num_bits, int word)
+{
+ int i, wout = 0;
+
+ for (i = 0; i < num_bits; i++)
+ wout |= (((word >> i) & 1) << (num_bits - i - 1));
+ return wout;
+}
+
+/*-------------------------------------------------------------------------*
+ * ED handling functions
+ *-------------------------------------------------------------------------*/
+
+/* link an ed into one of the HC chains */
+
+static int ep_link (ohci_t *ohci, ed_t *edi)
+{
+ volatile ed_t *ed = edi;
+ int int_branch;
+ int i;
+ int inter;
+ int interval;
+ int load;
+ __u32 * ed_p;
+
+ ed->state = ED_OPER;
+ ed->int_interval = 0;
+
+ switch (ed->type) {
+ case PIPE_CONTROL:
+ ed->hwNextED = 0;
+ if (ohci->ed_controltail == NULL) {
+ writel (ed, &ohci->regs->ed_controlhead);
+ } else {
+ ohci->ed_controltail->hwNextED = m32_swap ((unsigned long)ed);
+ }
+ ed->ed_prev = ohci->ed_controltail;
+ if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
+ !ohci->ed_rm_list[1] && !ohci->sleeping) {
+ ohci->hc_control |= OHCI_CTRL_CLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ ohci->ed_controltail = edi;
+ break;
+
+ case PIPE_BULK:
+ ed->hwNextED = 0;
+ if (ohci->ed_bulktail == NULL) {
+ writel (ed, &ohci->regs->ed_bulkhead);
+ } else {
+ ohci->ed_bulktail->hwNextED = m32_swap ((unsigned long)ed);
+ }
+ ed->ed_prev = ohci->ed_bulktail;
+ if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
+ !ohci->ed_rm_list[1] && !ohci->sleeping) {
+ ohci->hc_control |= OHCI_CTRL_BLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ ohci->ed_bulktail = edi;
+ break;
+
+ case PIPE_INTERRUPT:
+ load = ed->int_load;
+ interval = ep_2_n_interval (ed->int_period);
+ ed->int_interval = interval;
+ int_branch = ep_int_ballance (ohci, interval, load);
+ ed->int_branch = int_branch;
+
+ for (i = 0; i < ep_rev (6, interval); i += inter) {
+ inter = 1;
+ for (ed_p = &(ohci->hcca->int_table[ep_rev (5, i) + int_branch]);
+ (*ed_p != 0) && (((ed_t *)ed_p)->int_interval >= interval);
+ ed_p = &(((ed_t *)ed_p)->hwNextED))
+ inter = ep_rev (6, ((ed_t *)ed_p)->int_interval);
+ ed->hwNextED = *ed_p;
+ *ed_p = m32_swap((unsigned long)ed);
+ }
+ break;
+ }
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* scan the periodic table to find and unlink this ED */
+static void periodic_unlink ( struct ohci *ohci, volatile struct ed *ed,
+ unsigned index, unsigned period)
+{
+ for (; index < NUM_INTS; index += period) {
+ __u32 *ed_p = &ohci->hcca->int_table [index];
+
+ /* ED might have been unlinked through another path */
+ while (*ed_p != 0) {
+ if (((struct ed *)m32_swap ((unsigned long)ed_p)) == ed) {
+ *ed_p = ed->hwNextED;
+ break;
+ }
+ ed_p = & (((struct ed *)m32_swap ((unsigned long)ed_p))->hwNextED);
+ }
+ }
+}
+
+/* unlink an ed from one of the HC chains.
+ * just the link to the ed is unlinked.
+ * the link from the ed still points to another operational ed or 0
+ * so the HC can eventually finish the processing of the unlinked ed */
+
+static int ep_unlink (ohci_t *ohci, ed_t *edi)
+{
+ volatile ed_t *ed = edi;
+ int i;
+
+ ed->hwINFO |= m32_swap (OHCI_ED_SKIP);
+
+ switch (ed->type) {
+ case PIPE_CONTROL:
+ if (ed->ed_prev == NULL) {
+ if (!ed->hwNextED) {
+ ohci->hc_control &= ~OHCI_CTRL_CLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
+ } else {
+ ed->ed_prev->hwNextED = ed->hwNextED;
+ }
+ if (ohci->ed_controltail == ed) {
+ ohci->ed_controltail = ed->ed_prev;
+ } else {
+ ((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+ }
+ break;
+
+ case PIPE_BULK:
+ if (ed->ed_prev == NULL) {
+ if (!ed->hwNextED) {
+ ohci->hc_control &= ~OHCI_CTRL_BLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
+ } else {
+ ed->ed_prev->hwNextED = ed->hwNextED;
+ }
+ if (ohci->ed_bulktail == ed) {
+ ohci->ed_bulktail = ed->ed_prev;
+ } else {
+ ((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+ }
+ break;
+
+ case PIPE_INTERRUPT:
+ periodic_unlink (ohci, ed, 0, 1);
+ for (i = ed->int_branch; i < 32; i += ed->int_interval)
+ ohci->ohci_int_load[i] -= ed->int_load;
+ break;
+ }
+ ed->state = ED_UNLINK;
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* add/reinit an endpoint; this should be done once at the
+ * usb_set_configuration command, but the USB stack is a little bit
+ * stateless so we do it at every transaction if the state of the ed
+ * is ED_NEW then a dummy td is added and the state is changed to
+ * ED_UNLINK in all other cases the state is left unchanged the ed
+ * info fields are setted anyway even though most of them should not
+ * change
+ */
+static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe,
+ int interval, int load)
+{
+ td_t *td;
+ ed_t *ed_ret;
+ volatile ed_t *ed;
+
+ ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
+ (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
+
+ if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
+ err("ep_add_ed: pending delete");
+ /* pending delete request */
+ return NULL;
+ }
+
+ if (ed->state == ED_NEW) {
+ ed->hwINFO = m32_swap (OHCI_ED_SKIP); /* skip ed */
+ /* dummy td; end of td list for ed */
+ td = td_alloc (usb_dev);
+ ed->hwTailP = m32_swap ((unsigned long)td);
+ ed->hwHeadP = ed->hwTailP;
+ ed->state = ED_UNLINK;
+ ed->type = usb_pipetype (pipe);
+ ohci_dev.ed_cnt++;
+ }
+
+ ed->hwINFO = m32_swap (usb_pipedevice (pipe)
+ | usb_pipeendpoint (pipe) << 7
+ | (usb_pipeisoc (pipe)? 0x8000: 0)
+ | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
+ | usb_pipeslow (pipe) << 13
+ | usb_maxpacket (usb_dev, pipe) << 16);
+
+ if (ed->type == PIPE_INTERRUPT && ed->state == ED_UNLINK) {
+ ed->int_period = interval;
+ ed->int_load = load;
+ }
+
+ return ed_ret;
+}
+
+/*-------------------------------------------------------------------------*
+ * TD handling functions
+ *-------------------------------------------------------------------------*/
+
+/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
+
+static void td_fill (ohci_t *ohci, unsigned int info,
+ void *data, int len,
+ struct usb_device *dev, int index, urb_priv_t *urb_priv)
+{
+ volatile td_t *td, *td_pt;
+#ifdef OHCI_FILL_TRACE
+ int i;
+#endif
+
+ if (index > urb_priv->length) {
+ err("index > length");
+ return;
+ }
+ /* use this td as the next dummy */
+ td_pt = urb_priv->td [index];
+ td_pt->hwNextTD = 0;
+
+ /* fill the old dummy TD */
+ td = urb_priv->td [index] = (td_t *)(m32_swap (urb_priv->ed->hwTailP) & ~0xf);
+
+ td->ed = urb_priv->ed;
+ td->next_dl_td = NULL;
+ td->index = index;
+ td->data = (__u32)data;
+#ifdef OHCI_FILL_TRACE
+ if ((usb_pipetype(urb_priv->pipe) == PIPE_BULK) && usb_pipeout(urb_priv->pipe)) {
+ for (i = 0; i < len; i++)
+ printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
+ printf("\n");
+ }
+#endif
+ if (!len)
+ data = 0;
+
+ td->hwINFO = m32_swap (info);
+ td->hwCBP = m32_swap ((unsigned long)data);
+ if (data)
+ td->hwBE = m32_swap ((unsigned long)(data + len - 1));
+ else
+ td->hwBE = 0;
+ td->hwNextTD = m32_swap ((unsigned long)td_pt);
+
+ /* append to queue */
+ td->ed->hwTailP = td->hwNextTD;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* prepare all TDs of a transfer */
+
+static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
+{
+ ohci_t *ohci = &gohci;
+ int data_len = transfer_len;
+ void *data;
+ int cnt = 0;
+ __u32 info = 0;
+ unsigned int toggle = 0;
+
+ /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
+ if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
+ toggle = TD_T_TOGGLE;
+ } else {
+ toggle = TD_T_DATA0;
+ usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
+ }
+ urb->td_cnt = 0;
+ if (data_len)
+ data = buffer;
+ else
+ data = 0;
+
+ switch (usb_pipetype (pipe)) {
+ case PIPE_BULK:
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
+ while(data_len > 4096) {
+ td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
+ data += 4096; data_len -= 4096; cnt++;
+ }
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
+ td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
+ cnt++;
+
+ if (!ohci->sleeping)
+ writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
+ break;
+
+ case PIPE_CONTROL:
+ info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
+ td_fill (ohci, info, setup, 8, dev, cnt++, urb);
+ if (data_len > 0) {
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
+ /* NOTE: mishandles transfers >8K, some >4K */
+ td_fill (ohci, info, data, data_len, dev, cnt++, urb);
+ }
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
+ td_fill (ohci, info, data, 0, dev, cnt++, urb);
+ if (!ohci->sleeping)
+ writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
+ break;
+
+ case PIPE_INTERRUPT:
+ info = usb_pipeout (urb->pipe)?
+ TD_CC | TD_DP_OUT | toggle:
+ TD_CC | TD_R | TD_DP_IN | toggle;
+ td_fill (ohci, info, data, data_len, dev, cnt++, urb);
+ break;
+ }
+ if (urb->length != cnt)
+ dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
+}
+
+/*-------------------------------------------------------------------------*
+ * Done List handling functions
+ *-------------------------------------------------------------------------*/
+
+/* calculate the transfer length and update the urb */
+
+static void dl_transfer_length(td_t * td)
+{
+ __u32 tdINFO, tdBE, tdCBP;
+ urb_priv_t *lurb_priv = td->ed->purb;
+
+ tdINFO = m32_swap (td->hwINFO);
+ tdBE = m32_swap (td->hwBE);
+ tdCBP = m32_swap (td->hwCBP);
+
+ if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL &&
+ ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
+ if (tdBE != 0) {
+ if (td->hwCBP == 0)
+ lurb_priv->actual_length += tdBE - td->data + 1;
+ else
+ lurb_priv->actual_length += tdCBP - td->data;
+ }
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* replies to the request have to be on a FIFO basis so
+ * we reverse the reversed done-list */
+
+static td_t * dl_reverse_done_list (ohci_t *ohci)
+{
+ __u32 td_list_hc;
+ td_t *td_rev = NULL;
+ td_t *td_list = NULL;
+ urb_priv_t *lurb_priv = NULL;
+
+ td_list_hc = m32_swap (ohci->hcca->done_head) & 0xfffffff0;
+ ohci->hcca->done_head = 0;
+
+ while (td_list_hc) {
+ td_list = (td_t *)td_list_hc;
+
+ if (TD_CC_GET (m32_swap (td_list->hwINFO))) {
+ lurb_priv = td_list->ed->purb;
+ dbg(" USB-error/status: %x : %p",
+ TD_CC_GET (m32_swap (td_list->hwINFO)), td_list);
+ if (td_list->ed->hwHeadP & m32_swap (0x1)) {
+ if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
+ td_list->ed->hwHeadP =
+ (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & m32_swap (0xfffffff0)) |
+ (td_list->ed->hwHeadP & m32_swap (0x2));
+ lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
+ } else
+ td_list->ed->hwHeadP &= m32_swap (0xfffffff2);
+ }
+#ifdef CONFIG_MPC5200
+ td_list->hwNextTD = 0;
+#endif
+ }
+
+ td_list->next_dl_td = td_rev;
+ td_rev = td_list;
+ td_list_hc = m32_swap (td_list->hwNextTD) & 0xfffffff0;
+ }
+ return td_list;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* td done list */
+static int dl_done_list (ohci_t *ohci, td_t *td_list)
+{
+ td_t *td_list_next = NULL;
+ ed_t *ed;
+ int cc = 0;
+ int stat = 0;
+ /* urb_t *urb; */
+ urb_priv_t *lurb_priv;
+ __u32 tdINFO, edHeadP, edTailP;
+
+ while (td_list) {
+ td_list_next = td_list->next_dl_td;
+
+ tdINFO = m32_swap (td_list->hwINFO);
+
+ ed = td_list->ed;
+ lurb_priv = ed->purb;
+
+ dl_transfer_length(td_list);
+
+ /* error code of transfer */
+ cc = TD_CC_GET (tdINFO);
+ if (cc != 0) {
+ dbg("ConditionCode %#x", cc);
+ stat = cc_to_error[cc];
+ }
+
+ /* see if this done list makes for all TD's of current URB,
+ * and mark the URB finished if so */
+ if (++(lurb_priv->td_cnt) == lurb_priv->length) {
+#if 1
+ if ((ed->state & (ED_OPER | ED_UNLINK)) &&
+ (lurb_priv->state != URB_DEL))
+#else
+ if ((ed->state & (ED_OPER | ED_UNLINK)))
+#endif
+ lurb_priv->finished = sohci_return_job(ohci,
+ lurb_priv);
+ else
+ dbg("dl_done_list: strange.., ED state %x, ed->state\n");
+ } else
+ dbg("dl_done_list: processing TD %x, len %x\n", lurb_priv->td_cnt,
+ lurb_priv->length);
+ if (ed->state != ED_NEW &&
+ (usb_pipetype (lurb_priv->pipe) != PIPE_INTERRUPT)) {
+ edHeadP = m32_swap (ed->hwHeadP) & 0xfffffff0;
+ edTailP = m32_swap (ed->hwTailP);
+
+ /* unlink eds if they are not busy */
+ if ((edHeadP == edTailP) && (ed->state == ED_OPER))
+ ep_unlink (ohci, ed);
+ }
+
+ td_list = td_list_next;
+ }
+ return stat;
+}
+
+/*-------------------------------------------------------------------------*
+ * Virtual Root Hub
+ *-------------------------------------------------------------------------*/
+
+/* Device descriptor */
+static __u8 root_hub_dev_des[] =
+{
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x10, /* __u16 bcdUSB; v1.1 */
+ 0x01,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x00, /* __u8 iManufacturer; */
+ 0x01, /* __u8 iProduct; */
+ 0x00, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+/* Configuration descriptor */
+static __u8 root_hub_config_des[] =
+{
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes;
+ Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+ 0x00,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+static unsigned char root_hub_str_index0[] =
+{
+ 0x04, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 0x09, /* __u8 lang ID */
+ 0x04, /* __u8 lang ID */
+};
+
+static unsigned char root_hub_str_index1[] =
+{
+ 28, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 'O', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'C', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'I', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'R', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 't', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'u', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'b', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+};
+
+/* Hub class-specific descriptor is constructed dynamically */
+
+/*-------------------------------------------------------------------------*/
+
+#define OK(x) len = (x); break
+#ifdef DEBUG
+#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
+#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
+#else
+#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status)
+#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
+#endif
+#define RD_RH_STAT roothub_status(&gohci)
+#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1)
+
+/* request to virtual root hub */
+
+int rh_check_port_status(ohci_t *controller)
+{
+ __u32 temp, ndp, i;
+ int res;
+
+ res = -1;
+ temp = roothub_a (controller);
+ ndp = (temp & RH_A_NDP);
+#ifdef CONFIG_AT91C_PQFP_UHPBUG
+ ndp = (ndp == 2) ? 1:0;
+#endif
+ for (i = 0; i < ndp; i++) {
+ temp = roothub_portstatus (controller, i);
+ /* check for a device disconnect */
+ if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
+ (RH_PS_PESC | RH_PS_CSC)) &&
+ ((temp & RH_PS_CCS) == 0)) {
+ res = i;
+ break;
+ }
+ }
+ return res;
+}
+
+static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len, struct devrequest *cmd)
+{
+ void * data = buffer;
+ int leni = transfer_len;
+ int len = 0;
+ int stat = 0;
+ __u32 datab[4];
+ __u8 *data_buf = (__u8 *)datab;
+ __u16 bmRType_bReq;
+ __u16 wValue;
+ __u16 wIndex;
+ __u16 wLength;
+
+#ifdef DEBUG
+pkt_print(NULL, dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
+#else
+ wait_ms(1);
+#endif
+ if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+ info("Root-Hub submit IRQ: NOT implemented");
+ return 0;
+ }
+
+ bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+ wValue = cpu_to_le16 (cmd->value);
+ wIndex = cpu_to_le16 (cmd->index);
+ wLength = cpu_to_le16 (cmd->length);
+
+ info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
+ dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
+
+ switch (bmRType_bReq) {
+ /* Request Destination:
+ without flags: Device,
+ RH_INTERFACE: interface,
+ RH_ENDPOINT: endpoint,
+ RH_CLASS means HUB here,
+ RH_OTHER | RH_CLASS almost ever means HUB_PORT here
+ */
+
+ case RH_GET_STATUS:
+ *(__u16 *) data_buf = cpu_to_le16 (1); OK (2);
+ case RH_GET_STATUS | RH_INTERFACE:
+ *(__u16 *) data_buf = cpu_to_le16 (0); OK (2);
+ case RH_GET_STATUS | RH_ENDPOINT:
+ *(__u16 *) data_buf = cpu_to_le16 (0); OK (2);
+ case RH_GET_STATUS | RH_CLASS:
+ *(__u32 *) data_buf = cpu_to_le32 (
+ RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
+ OK (4);
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+ *(__u32 *) data_buf = cpu_to_le32 (RD_RH_PORTSTAT); OK (4);
+
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ switch (wValue) {
+ case (RH_ENDPOINT_STALL): OK (0);
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ switch (wValue) {
+ case RH_C_HUB_LOCAL_POWER:
+ OK(0);
+ case (RH_C_HUB_OVER_CURRENT):
+ WR_RH_STAT(RH_HS_OCIC); OK (0);
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ switch (wValue) {
+ case (RH_PORT_ENABLE):
+ WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
+ case (RH_PORT_SUSPEND):
+ WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
+ case (RH_PORT_POWER):
+ WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
+ case (RH_C_PORT_CONNECTION):
+ WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
+ case (RH_C_PORT_ENABLE):
+ WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
+ case (RH_C_PORT_SUSPEND):
+ WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
+ case (RH_C_PORT_OVER_CURRENT):
+ WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
+ case (RH_C_PORT_RESET):
+ WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
+ }
+ break;
+
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ switch (wValue) {
+ case (RH_PORT_SUSPEND):
+ WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
+ case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
+ if (RD_RH_PORTSTAT & RH_PS_CCS)
+ WR_RH_PORTSTAT (RH_PS_PRS);
+ OK (0);
+ case (RH_PORT_POWER):
+ WR_RH_PORTSTAT (RH_PS_PPS );
+ wait_ms(100);
+ OK (0);
+ case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
+ if (RD_RH_PORTSTAT & RH_PS_CCS)
+ WR_RH_PORTSTAT (RH_PS_PES );
+ OK (0);
+ }
+ break;
+
+ case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
+
+ case RH_GET_DESCRIPTOR:
+ switch ((wValue & 0xff00) >> 8) {
+ case (0x01): /* device descriptor */
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_dev_des),
+ wLength));
+ data_buf = root_hub_dev_des; OK(len);
+ case (0x02): /* configuration descriptor */
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_config_des),
+ wLength));
+ data_buf = root_hub_config_des; OK(len);
+ case (0x03): /* string descriptors */
+ if(wValue==0x0300) {
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_str_index0),
+ wLength));
+ data_buf = root_hub_str_index0;
+ OK(len);
+ }
+ if(wValue==0x0301) {
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_str_index1),
+ wLength));
+ data_buf = root_hub_str_index1;
+ OK(len);
+ }
+ default:
+ stat = USB_ST_STALLED;
+ }
+ break;
+
+ case RH_GET_DESCRIPTOR | RH_CLASS:
+ {
+ __u32 temp = roothub_a (&gohci);
+
+ data_buf [0] = 9; /* min length; */
+ data_buf [1] = 0x29;
+ data_buf [2] = temp & RH_A_NDP;
+#ifdef CONFIG_AT91C_PQFP_UHPBUG
+ data_buf [2] = (data_buf [2] == 2) ? 1:0;
+#endif
+ data_buf [3] = 0;
+ if (temp & RH_A_PSM) /* per-port power switching? */
+ data_buf [3] |= 0x1;
+ if (temp & RH_A_NOCP) /* no overcurrent reporting? */
+ data_buf [3] |= 0x10;
+ else if (temp & RH_A_OCPM) /* per-port overcurrent reporting? */
+ data_buf [3] |= 0x8;
+
+ /* corresponds to data_buf[4-7] */
+ datab [1] = 0;
+ data_buf [5] = (temp & RH_A_POTPGT) >> 24;
+ temp = roothub_b (&gohci);
+ data_buf [7] = temp & RH_B_DR;
+ if (data_buf [2] < 7) {
+ data_buf [8] = 0xff;
+ } else {
+ data_buf [0] += 2;
+ data_buf [8] = (temp & RH_B_DR) >> 8;
+ data_buf [10] = data_buf [9] = 0xff;
+ }
+
+ len = min_t(unsigned int, leni,
+ min_t(unsigned int, data_buf [0], wLength));
+ OK (len);
+ }
+
+ case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1);
+
+ case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0);
+
+ default:
+ dbg ("unsupported root hub command");
+ stat = USB_ST_STALLED;
+ }
+
+#ifdef DEBUG
+ ohci_dump_roothub (&gohci, 1);
+#else
+ wait_ms(1);
+#endif
+
+ len = min_t(int, len, leni);
+ if (data != data_buf)
+ memcpy (data, data_buf, len);
+ dev->act_len = len;
+ dev->status = stat;
+
+#ifdef DEBUG
+ pkt_print(NULL, dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
+#else
+ wait_ms(1);
+#endif
+
+ return stat;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* common code for handling submit messages - used for all but root hub */
+/* accesses. */
+int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup, int interval)
+{
+ int stat = 0;
+ int maxsize = usb_maxpacket(dev, pipe);
+ int timeout;
+ urb_priv_t *urb;
+
+ urb = malloc(sizeof(urb_priv_t));
+ memset(urb, 0, sizeof(urb_priv_t));
+
+ urb->dev = dev;
+ urb->pipe = pipe;
+ urb->transfer_buffer = buffer;
+ urb->transfer_buffer_length = transfer_len;
+ urb->interval = interval;
+
+ /* device pulled? Shortcut the action. */
+ if (devgone == dev) {
+ dev->status = USB_ST_CRC_ERR;
+ return 0;
+ }
+
+#ifdef DEBUG
+ urb->actual_length = 0;
+ pkt_print(urb, dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+#else
+ wait_ms(1);
+#endif
+ if (!maxsize) {
+ err("submit_common_message: pipesize for pipe %lx is zero",
+ pipe);
+ return -1;
+ }
+
+ if (sohci_submit_job(urb, setup) < 0) {
+ err("sohci_submit_job failed");
+ return -1;
+ }
+
+#if 0
+ wait_ms(10);
+ /* ohci_dump_status(&gohci); */
+#endif
+
+ /* allow more time for a BULK device to react - some are slow */
+#define BULK_TO 5000 /* timeout in milliseconds */
+ if (usb_pipetype (pipe) == PIPE_BULK)
+ timeout = BULK_TO;
+ else
+ timeout = 100;
+
+ /* wait for it to complete */
+ for (;;) {
+ /* check whether the controller is done */
+ stat = hc_interrupt();
+ if (stat < 0) {
+ stat = USB_ST_CRC_ERR;
+ break;
+ }
+
+ /* NOTE: since we are not interrupt driven in U-Boot and always
+ * handle only one URB at a time, we cannot assume the
+ * transaction finished on the first successful return from
+ * hc_interrupt().. unless the flag for current URB is set,
+ * meaning that all TD's to/from device got actually
+ * transferred and processed. If the current URB is not
+ * finished we need to re-iterate this loop so as
+ * hc_interrupt() gets called again as there needs to be some
+ * more TD's to process still */
+ if ((stat >= 0) && (stat != 0xff) && (urb->finished)) {
+ /* 0xff is returned for an SF-interrupt */
+ break;
+ }
+
+ if (--timeout) {
+ wait_ms(1);
+ if (!urb->finished)
+ dbg("\%");
+
+ } else {
+ err("CTL:TIMEOUT ");
+ dbg("submit_common_msg: TO status %x\n", stat);
+ urb->finished = 1;
+ stat = USB_ST_CRC_ERR;
+ break;
+ }
+ }
+
+ dev->status = stat;
+ dev->act_len = transfer_len;
+
+#ifdef DEBUG
+ pkt_print(urb, dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
+#else
+ wait_ms(1);
+#endif
+
+ /* free TDs in urb_priv */
+ if (usb_pipetype (pipe) != PIPE_INTERRUPT)
+ urb_free_priv (urb);
+ return 0;
+}
+
+/* submit routines called from usb.c */
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len)
+{
+ info("submit_bulk_msg");
+ return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup)
+{
+ int maxsize = usb_maxpacket(dev, pipe);
+
+ info("submit_control_msg");
+#ifdef DEBUG
+ pkt_print(NULL, dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+#else
+ wait_ms(1);
+#endif
+ if (!maxsize) {
+ err("submit_control_message: pipesize for pipe %lx is zero",
+ pipe);
+ return -1;
+ }
+ if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
+ gohci.rh.dev = dev;
+ /* root hub - redirect */
+ return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
+ setup);
+ }
+
+ return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
+}
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, int interval)
+{
+ info("submit_int_msg");
+ return submit_common_msg(dev, pipe, buffer, transfer_len, NULL,
+ interval);
+}
+
+/*-------------------------------------------------------------------------*
+ * HC functions
+ *-------------------------------------------------------------------------*/
+
+/* reset the HC and BUS */
+
+static int hc_reset (ohci_t *ohci)
+{
+ int timeout = 30;
+ int smm_timeout = 50; /* 0,5 sec */
+
+ dbg("%s\n", __FUNCTION__);
+
+ if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
+ writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
+ info("USB HC TakeOver from SMM");
+ while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
+ wait_ms (10);
+ if (--smm_timeout == 0) {
+ err("USB HC TakeOver failed!");
+ return -1;
+ }
+ }
+ }
+
+ /* Disable HC interrupts */
+ writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
+
+ dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;\n",
+ ohci->slot_name,
+ readl(&ohci->regs->control));
+
+ /* Reset USB (needed by some controllers) */
+ ohci->hc_control = 0;
+ writel (ohci->hc_control, &ohci->regs->control);
+
+ /* HC Reset requires max 10 us delay */
+ writel (OHCI_HCR, &ohci->regs->cmdstatus);
+ while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
+ if (--timeout == 0) {
+ err("USB HC reset timed out!");
+ return -1;
+ }
+ udelay (1);
+ }
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Start an OHCI controller, set the BUS operational
+ * enable interrupts
+ * connect the virtual root hub */
+
+static int hc_start (ohci_t * ohci)
+{
+ __u32 mask;
+ unsigned int fminterval;
+
+ ohci->disabled = 1;
+
+ /* Tell the controller where the control and bulk lists are
+ * The lists are empty now. */
+
+ writel (0, &ohci->regs->ed_controlhead);
+ writel (0, &ohci->regs->ed_bulkhead);
+
+ writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
+
+ fminterval = 0x2edf;
+ writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
+ fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
+ writel (fminterval, &ohci->regs->fminterval);
+ writel (0x628, &ohci->regs->lsthresh);
+
+ /* start controller operations */
+ ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
+ ohci->disabled = 0;
+ writel (ohci->hc_control, &ohci->regs->control);
+
+ /* disable all interrupts */
+ mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
+ OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
+ OHCI_INTR_OC | OHCI_INTR_MIE);
+ writel (mask, &ohci->regs->intrdisable);
+ /* clear all interrupts */
+ mask &= ~OHCI_INTR_MIE;
+ writel (mask, &ohci->regs->intrstatus);
+ /* Choose the interrupts we care about now - but w/o MIE */
+ mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
+ writel (mask, &ohci->regs->intrenable);
+
+#ifdef OHCI_USE_NPS
+ /* required for AMD-756 and some Mac platforms */
+ writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
+ &ohci->regs->roothub.a);
+ writel (RH_HS_LPSC, &ohci->regs->roothub.status);
+#endif /* OHCI_USE_NPS */
+
+#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
+ /* POTPGT delay is bits 24-31, in 2 ms units. */
+ mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
+
+ /* connect the virtual root hub */
+ ohci->rh.devnum = 0;
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Poll USB interrupt. */
+void usb_event_poll(void)
+{
+ hc_interrupt();
+}
+
+/* an interrupt happens */
+
+static int hc_interrupt (void)
+{
+ ohci_t *ohci = &gohci;
+ struct ohci_regs *regs = ohci->regs;
+ int ints;
+ int stat = -1;
+
+ if ((ohci->hcca->done_head != 0) &&
+ !(m32_swap (ohci->hcca->done_head) & 0x01)) {
+ ints = OHCI_INTR_WDH;
+ } else if ((ints = readl (®s->intrstatus)) == ~(u32)0) {
+ ohci->disabled++;
+ err ("%s device removed!", ohci->slot_name);
+ return -1;
+ } else if ((ints &= readl (®s->intrenable)) == 0) {
+ dbg("hc_interrupt: returning..\n");
+ return 0xff;
+ }
+
+ /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
+
+ if (ints & OHCI_INTR_RHSC) {
+ got_rhsc = 1;
+ stat = 0xff;
+ }
+
+ if (ints & OHCI_INTR_UE) {
+ ohci->disabled++;
+ err ("OHCI Unrecoverable Error, controller usb-%s disabled",
+ ohci->slot_name);
+ /* e.g. due to PCI Master/Target Abort */
+
+#ifdef DEBUG
+ ohci_dump (ohci, 1);
+#else
+ wait_ms(1);
+#endif
+ /* FIXME: be optimistic, hope that bug won't repeat often. */
+ /* Make some non-interrupt context restart the controller. */
+ /* Count and limit the retries though; either hardware or */
+ /* software errors can go forever... */
+ hc_reset (ohci);
+ return -1;
+ }
+
+ if (ints & OHCI_INTR_WDH) {
+ wait_ms(1);
+ writel (OHCI_INTR_WDH, ®s->intrdisable);
+ (void)readl (®s->intrdisable); /* flush */
+ stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
+ writel (OHCI_INTR_WDH, ®s->intrenable);
+ (void)readl (®s->intrdisable); /* flush */
+ }
+
+ if (ints & OHCI_INTR_SO) {
+ dbg("USB Schedule overrun\n");
+ writel (OHCI_INTR_SO, ®s->intrenable);
+ stat = -1;
+ }
+
+ /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
+ if (ints & OHCI_INTR_SF) {
+ unsigned int frame = m16_swap (ohci->hcca->frame_no) & 1;
+ wait_ms(1);
+ writel (OHCI_INTR_SF, ®s->intrdisable);
+ if (ohci->ed_rm_list[frame] != NULL)
+ writel (OHCI_INTR_SF, ®s->intrenable);
+ stat = 0xff;
+ }
+
+ writel (ints, ®s->intrstatus);
+ return stat;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*-------------------------------------------------------------------------*/
+
+/* De-allocate all resources.. */
+
+static void hc_release_ohci (ohci_t *ohci)
+{
+ dbg ("USB HC release ohci usb-%s", ohci->slot_name);
+
+ if (!ohci->disabled)
+ hc_reset (ohci);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * low level initalisation routine, called from usb.c
+ */
+static char ohci_inited = 0;
+
+int usb_lowlevel_init(void)
+{
+#ifdef CONFIG_PCI_OHCI
+ pci_dev_t pdev;
+#endif
+
+#ifdef CFG_USB_OHCI_CPU_INIT
+ /* cpu dependant init */
+ if(usb_cpu_init())
+ return -1;
+#endif
+
+#ifdef CFG_USB_OHCI_BOARD_INIT
+ /* board dependant init */
+ if(usb_board_init())
+ return -1;
+#endif
+ memset (&gohci, 0, sizeof (ohci_t));
+
+ /* align the storage */
+ if ((__u32)&ghcca[0] & 0xff) {
+ err("HCCA not aligned!!");
+ return -1;
+ }
+ phcca = &ghcca[0];
+ info("aligned ghcca %p", phcca);
+ memset(&ohci_dev, 0, sizeof(struct ohci_device));
+ if ((__u32)&ohci_dev.ed[0] & 0x7) {
+ err("EDs not aligned!!");
+ return -1;
+ }
+ memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
+ if ((__u32)gtd & 0x7) {
+ err("TDs not aligned!!");
+ return -1;
+ }
+ ptd = gtd;
+ gohci.hcca = phcca;
+ memset (phcca, 0, sizeof (struct ohci_hcca));
+
+ gohci.disabled = 1;
+ gohci.sleeping = 0;
+ gohci.irq = -1;
+#ifdef CONFIG_PCI_OHCI
+ pdev = pci_find_devices(ohci_pci_ids, 0);
+
+ if (pdev != -1) {
+ u16 vid, did;
+ u32 base;
+ pci_read_config_word(pdev, PCI_VENDOR_ID, &vid);
+ pci_read_config_word(pdev, PCI_DEVICE_ID, &did);
+ printf("OHCI pci controller (%04x, %04x) found @(%d:%d:%d)\n",
+ vid, did, (pdev >> 16) & 0xff,
+ (pdev >> 11) & 0x1f, (pdev >> 8) & 0x7);
+ pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base);
+ printf("OHCI regs address 0x%08x\n", base);
+ gohci.regs = (struct ohci_regs *)base;
+ } else
+ return -1;
+#else
+ gohci.regs = (struct ohci_regs *)CFG_USB_OHCI_REGS_BASE;
+#endif
+
+ gohci.flags = 0;
+ gohci.slot_name = CFG_USB_OHCI_SLOT_NAME;
+
+ if (hc_reset (&gohci) < 0) {
+ hc_release_ohci (&gohci);
+ err ("can't reset usb-%s", gohci.slot_name);
+#ifdef CFG_USB_OHCI_BOARD_INIT
+ /* board dependant cleanup */
+ usb_board_init_fail();
+#endif
+
+#ifdef CFG_USB_OHCI_CPU_INIT
+ /* cpu dependant cleanup */
+ usb_cpu_init_fail();
+#endif
+ return -1;
+ }
+
+ /* FIXME this is a second HC reset; why?? */
+ /* writel(gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control);
+ wait_ms(10); */
+ if (hc_start (&gohci) < 0) {
+ err ("can't start usb-%s", gohci.slot_name);
+ hc_release_ohci (&gohci);
+ /* Initialization failed */
+#ifdef CFG_USB_OHCI_BOARD_INIT
+ /* board dependant cleanup */
+ usb_board_stop();
+#endif
+
+#ifdef CFG_USB_OHCI_CPU_INIT
+ /* cpu dependant cleanup */
+ usb_cpu_stop();
+#endif
+ return -1;
+ }
+
+#ifdef DEBUG
+ ohci_dump (&gohci, 1);
+#else
+ wait_ms(1);
+#endif
+ ohci_inited = 1;
+ return 0;
+}
+
+int usb_lowlevel_stop(void)
+{
+ /* this gets called really early - before the controller has */
+ /* even been initialized! */
+ if (!ohci_inited)
+ return 0;
+ /* TODO release any interrupts, etc. */
+ /* call hc_release_ohci() here ? */
+ hc_reset (&gohci);
+
+#ifdef CFG_USB_OHCI_BOARD_INIT
+ /* board dependant cleanup */
+ if(usb_board_stop())
+ return -1;
+#endif
+
+#ifdef CFG_USB_OHCI_CPU_INIT
+ /* cpu dependant cleanup */
+ if(usb_cpu_stop())
+ return -1;
+#endif
+
+ return 0;
+}
+#endif /* CONFIG_USB_OHCI_NEW */
--- /dev/null
+/*
+ * URB OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * usb-ohci.h
+ */
+
+/* functions for doing board or CPU specific setup/cleanup */
+extern int usb_board_init(void);
+extern int usb_board_stop(void);
+extern int usb_board_init_fail(void);
+
+extern int usb_cpu_init(void);
+extern int usb_cpu_stop(void);
+extern int usb_cpu_init_fail(void);
+
+
+static int cc_to_error[16] = {
+
+/* mapping of the OHCI CC status to error codes */
+ /* No Error */ 0,
+ /* CRC Error */ USB_ST_CRC_ERR,
+ /* Bit Stuff */ USB_ST_BIT_ERR,
+ /* Data Togg */ USB_ST_CRC_ERR,
+ /* Stall */ USB_ST_STALLED,
+ /* DevNotResp */ -1,
+ /* PIDCheck */ USB_ST_BIT_ERR,
+ /* UnExpPID */ USB_ST_BIT_ERR,
+ /* DataOver */ USB_ST_BUF_ERR,
+ /* DataUnder */ USB_ST_BUF_ERR,
+ /* reservd */ -1,
+ /* reservd */ -1,
+ /* BufferOver */ USB_ST_BUF_ERR,
+ /* BuffUnder */ USB_ST_BUF_ERR,
+ /* Not Access */ -1,
+ /* Not Access */ -1
+};
+
+/* ED States */
+
+#define ED_NEW 0x00
+#define ED_UNLINK 0x01
+#define ED_OPER 0x02
+#define ED_DEL 0x04
+#define ED_URB_DEL 0x08
+
+/* usb_ohci_ed */
+struct ed {
+ __u32 hwINFO;
+ __u32 hwTailP;
+ __u32 hwHeadP;
+ __u32 hwNextED;
+
+ struct ed *ed_prev;
+ __u8 int_period;
+ __u8 int_branch;
+ __u8 int_load;
+ __u8 int_interval;
+ __u8 state;
+ __u8 type;
+ __u16 last_iso;
+ struct ed *ed_rm_list;
+
+ struct usb_device *usb_dev;
+ void *purb;
+ __u32 unused[2];
+} __attribute((aligned(16)));
+typedef struct ed ed_t;
+
+
+/* TD info field */
+#define TD_CC 0xf0000000
+#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
+#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
+#define TD_EC 0x0C000000
+#define TD_T 0x03000000
+#define TD_T_DATA0 0x02000000
+#define TD_T_DATA1 0x03000000
+#define TD_T_TOGGLE 0x00000000
+#define TD_R 0x00040000
+#define TD_DI 0x00E00000
+#define TD_DI_SET(X) (((X) & 0x07)<< 21)
+#define TD_DP 0x00180000
+#define TD_DP_SETUP 0x00000000
+#define TD_DP_IN 0x00100000
+#define TD_DP_OUT 0x00080000
+
+#define TD_ISO 0x00010000
+#define TD_DEL 0x00020000
+
+/* CC Codes */
+#define TD_CC_NOERROR 0x00
+#define TD_CC_CRC 0x01
+#define TD_CC_BITSTUFFING 0x02
+#define TD_CC_DATATOGGLEM 0x03
+#define TD_CC_STALL 0x04
+#define TD_DEVNOTRESP 0x05
+#define TD_PIDCHECKFAIL 0x06
+#define TD_UNEXPECTEDPID 0x07
+#define TD_DATAOVERRUN 0x08
+#define TD_DATAUNDERRUN 0x09
+#define TD_BUFFEROVERRUN 0x0C
+#define TD_BUFFERUNDERRUN 0x0D
+#define TD_NOTACCESSED 0x0F
+
+
+#define MAXPSW 1
+
+struct td {
+ __u32 hwINFO;
+ __u32 hwCBP; /* Current Buffer Pointer */
+ __u32 hwNextTD; /* Next TD Pointer */
+ __u32 hwBE; /* Memory Buffer End Pointer */
+
+/* #ifndef CONFIG_MPC5200 /\* this seems wrong *\/ */
+ __u16 hwPSW[MAXPSW];
+/* #endif */
+ __u8 unused;
+ __u8 index;
+ struct ed *ed;
+ struct td *next_dl_td;
+ struct usb_device *usb_dev;
+ int transfer_len;
+ __u32 data;
+
+ __u32 unused2[2];
+} __attribute((aligned(32)));
+typedef struct td td_t;
+
+#define OHCI_ED_SKIP (1 << 14)
+
+/*
+ * The HCCA (Host Controller Communications Area) is a 256 byte
+ * structure defined in the OHCI spec. that the host controller is
+ * told the base address of. It must be 256-byte aligned.
+ */
+
+#define NUM_INTS 32 /* part of the OHCI standard */
+struct ohci_hcca {
+ __u32 int_table[NUM_INTS]; /* Interrupt ED table */
+#if defined(CONFIG_MPC5200)
+ __u16 pad1; /* set to 0 on each frame_no change */
+ __u16 frame_no; /* current frame number */
+#else
+ __u16 frame_no; /* current frame number */
+ __u16 pad1; /* set to 0 on each frame_no change */
+#endif
+ __u32 done_head; /* info returned for an interrupt */
+ u8 reserved_for_hc[116];
+} __attribute((aligned(256)));
+
+
+/*
+ * Maximum number of root hub ports.
+ */
+#ifndef CFG_USB_OHCI_MAX_ROOT_PORTS
+# error "CFG_USB_OHCI_MAX_ROOT_PORTS undefined!"
+#endif
+
+/*
+ * This is the structure of the OHCI controller's memory mapped I/O
+ * region. This is Memory Mapped I/O. You must use the readl() and
+ * writel() macros defined in asm/io.h to access these!!
+ */
+struct ohci_regs {
+ /* control and status registers */
+ __u32 revision;
+ __u32 control;
+ __u32 cmdstatus;
+ __u32 intrstatus;
+ __u32 intrenable;
+ __u32 intrdisable;
+ /* memory pointers */
+ __u32 hcca;
+ __u32 ed_periodcurrent;
+ __u32 ed_controlhead;
+ __u32 ed_controlcurrent;
+ __u32 ed_bulkhead;
+ __u32 ed_bulkcurrent;
+ __u32 donehead;
+ /* frame counters */
+ __u32 fminterval;
+ __u32 fmremaining;
+ __u32 fmnumber;
+ __u32 periodicstart;
+ __u32 lsthresh;
+ /* Root hub ports */
+ struct ohci_roothub_regs {
+ __u32 a;
+ __u32 b;
+ __u32 status;
+ __u32 portstatus[CFG_USB_OHCI_MAX_ROOT_PORTS];
+ } roothub;
+} __attribute((aligned(32)));
+
+
+/* OHCI CONTROL AND STATUS REGISTER MASKS */
+
+/*
+ * HcControl (control) register masks
+ */
+#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */
+#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */
+#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */
+#define OHCI_CTRL_CLE (1 << 4) /* control list enable */
+#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */
+#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */
+#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
+#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
+#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */
+
+/* pre-shifted values for HCFS */
+# define OHCI_USB_RESET (0 << 6)
+# define OHCI_USB_RESUME (1 << 6)
+# define OHCI_USB_OPER (2 << 6)
+# define OHCI_USB_SUSPEND (3 << 6)
+
+/*
+ * HcCommandStatus (cmdstatus) register masks
+ */
+#define OHCI_HCR (1 << 0) /* host controller reset */
+#define OHCI_CLF (1 << 1) /* control list filled */
+#define OHCI_BLF (1 << 2) /* bulk list filled */
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_SOC (3 << 16) /* scheduling overrun count */
+
+/*
+ * masks used with interrupt registers:
+ * HcInterruptStatus (intrstatus)
+ * HcInterruptEnable (intrenable)
+ * HcInterruptDisable (intrdisable)
+ */
+#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */
+#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */
+#define OHCI_INTR_SF (1 << 2) /* start frame */
+#define OHCI_INTR_RD (1 << 3) /* resume detect */
+#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */
+#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */
+#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */
+#define OHCI_INTR_OC (1 << 30) /* ownership change */
+#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */
+
+
+/* Virtual Root HUB */
+struct virt_root_hub {
+ int devnum; /* Address of Root Hub endpoint */
+ void *dev; /* was urb */
+ void *int_addr;
+ int send;
+ int interval;
+};
+
+/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
+
+/* destination of request */
+#define RH_INTERFACE 0x01
+#define RH_ENDPOINT 0x02
+#define RH_OTHER 0x03
+
+#define RH_CLASS 0x20
+#define RH_VENDOR 0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
+#define RH_SET_ADDRESS 0x0500
+#define RH_GET_DESCRIPTOR 0x0680
+#define RH_SET_DESCRIPTOR 0x0700
+#define RH_GET_CONFIGURATION 0x0880
+#define RH_SET_CONFIGURATION 0x0900
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP 0x2000
+
+
+/* Hub port features */
+#define RH_PORT_CONNECTION 0x00
+#define RH_PORT_ENABLE 0x01
+#define RH_PORT_SUSPEND 0x02
+#define RH_PORT_OVER_CURRENT 0x03
+#define RH_PORT_RESET 0x04
+#define RH_PORT_POWER 0x08
+#define RH_PORT_LOW_SPEED 0x09
+
+#define RH_C_PORT_CONNECTION 0x10
+#define RH_C_PORT_ENABLE 0x11
+#define RH_C_PORT_SUSPEND 0x12
+#define RH_C_PORT_OVER_CURRENT 0x13
+#define RH_C_PORT_RESET 0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER 0x00
+#define RH_C_HUB_OVER_CURRENT 0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL 0x01
+
+#define RH_ACK 0x01
+#define RH_REQ_ERR -1
+#define RH_NACK 0x00
+
+
+/* OHCI ROOT HUB REGISTER MASKS */
+
+/* roothub.portstatus [i] bits */
+#define RH_PS_CCS 0x00000001 /* current connect status */
+#define RH_PS_PES 0x00000002 /* port enable status*/
+#define RH_PS_PSS 0x00000004 /* port suspend status */
+#define RH_PS_POCI 0x00000008 /* port over current indicator */
+#define RH_PS_PRS 0x00000010 /* port reset status */
+#define RH_PS_PPS 0x00000100 /* port power status */
+#define RH_PS_LSDA 0x00000200 /* low speed device attached */
+#define RH_PS_CSC 0x00010000 /* connect status change */
+#define RH_PS_PESC 0x00020000 /* port enable status change */
+#define RH_PS_PSSC 0x00040000 /* port suspend status change */
+#define RH_PS_OCIC 0x00080000 /* over current indicator change */
+#define RH_PS_PRSC 0x00100000 /* port reset status change */
+
+/* roothub.status bits */
+#define RH_HS_LPS 0x00000001 /* local power status */
+#define RH_HS_OCI 0x00000002 /* over current indicator */
+#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
+#define RH_HS_LPSC 0x00010000 /* local power status change */
+#define RH_HS_OCIC 0x00020000 /* over current indicator change */
+#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
+
+/* roothub.b masks */
+#define RH_B_DR 0x0000ffff /* device removable flags */
+#define RH_B_PPCM 0xffff0000 /* port power control mask */
+
+/* roothub.a masks */
+#define RH_A_NDP (0xff << 0) /* number of downstream ports */
+#define RH_A_PSM (1 << 8) /* power switching mode */
+#define RH_A_NPS (1 << 9) /* no power switching */
+#define RH_A_DT (1 << 10) /* device type (mbz) */
+#define RH_A_OCPM (1 << 11) /* over current protection mode */
+#define RH_A_NOCP (1 << 12) /* no over current protection */
+#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
+
+/* urb */
+#define N_URB_TD 48
+typedef struct
+{
+ ed_t *ed;
+ __u16 length; /* number of tds associated with this request */
+ __u16 td_cnt; /* number of tds already serviced */
+ struct usb_device *dev;
+ int state;
+ unsigned long pipe;
+ void *transfer_buffer;
+ int transfer_buffer_length;
+ int interval;
+ int actual_length;
+ int finished;
+ td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */
+} urb_priv_t;
+#define URB_DEL 1
+
+/*
+ * This is the full ohci controller description
+ *
+ * Note how the "proper" USB information is just
+ * a subset of what the full implementation needs. (Linus)
+ */
+
+
+typedef struct ohci {
+ struct ohci_hcca *hcca; /* hcca */
+ /*dma_addr_t hcca_dma;*/
+
+ int irq;
+ int disabled; /* e.g. got a UE, we're hung */
+ int sleeping;
+ unsigned long flags; /* for HC bugs */
+
+ struct ohci_regs *regs; /* OHCI controller's memory */
+
+ int ohci_int_load[32]; /* load of the 32 Interrupt Chains (for load balancing)*/
+ ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */
+ ed_t *ed_bulktail; /* last endpoint of bulk list */
+ ed_t *ed_controltail; /* last endpoint of control list */
+ int intrstatus;
+ __u32 hc_control; /* copy of the hc control reg */
+ struct usb_device *dev[32];
+ struct virt_root_hub rh;
+
+ const char *slot_name;
+} ohci_t;
+
+#define NUM_EDS 8 /* num of preallocated endpoint descriptors */
+
+struct ohci_device {
+ ed_t ed[NUM_EDS];
+ int ed_cnt;
+};
+
+/* hcd */
+/* endpoint */
+static int ep_link(ohci_t * ohci, ed_t * ed);
+static int ep_unlink(ohci_t * ohci, ed_t * ed);
+static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe,
+ int interval, int load);
+
+/*-------------------------------------------------------------------------*/
+
+/* we need more TDs than EDs */
+#define NUM_TD 64
+
+/* +1 so we can align the storage */
+td_t gtd[NUM_TD+1];
+/* pointers to aligned storage */
+td_t *ptd;
+
+/* TDs ... */
+static inline struct td *
+td_alloc (struct usb_device *usb_dev)
+{
+ int i;
+ struct td *td;
+
+ td = NULL;
+ for (i = 0; i < NUM_TD; i++)
+ {
+ if (ptd[i].usb_dev == NULL)
+ {
+ td = &ptd[i];
+ td->usb_dev = usb_dev;
+ break;
+ }
+ }
+
+ return td;
+}
+
+static inline void
+ed_free (struct ed *ed)
+{
+ ed->usb_dev = NULL;
+}
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Gerry Hamel, geh@ti.com, Texas Instruments
+ *
+ * Based on
+ * linux/drivers/usbd/usbd.c.c - USB Device Core Layer
+ *
+ * Copyright (c) 2000, 2001, 2002 Lineo
+ * Copyright (c) 2001 Hewlett Packard
+ *
+ * By:
+ * Stuart Lynne <sl@lineo.com>,
+ * Tom Rushworth <tbr@lineo.com>,
+ * Bruce Balden <balden@lineo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <malloc.h>
+#include "usbdcore.h"
+
+#define MAX_INTERFACES 2
+
+
+int maxstrings = 20;
+
+/* Global variables ************************************************************************** */
+
+struct usb_string_descriptor **usb_strings;
+
+int usb_devices;
+
+extern struct usb_function_driver ep0_driver;
+
+int registered_functions;
+int registered_devices;
+
+char *usbd_device_events[] = {
+ "DEVICE_UNKNOWN",
+ "DEVICE_INIT",
+ "DEVICE_CREATE",
+ "DEVICE_HUB_CONFIGURED",
+ "DEVICE_RESET",
+ "DEVICE_ADDRESS_ASSIGNED",
+ "DEVICE_CONFIGURED",
+ "DEVICE_SET_INTERFACE",
+ "DEVICE_SET_FEATURE",
+ "DEVICE_CLEAR_FEATURE",
+ "DEVICE_DE_CONFIGURED",
+ "DEVICE_BUS_INACTIVE",
+ "DEVICE_BUS_ACTIVITY",
+ "DEVICE_POWER_INTERRUPTION",
+ "DEVICE_HUB_RESET",
+ "DEVICE_DESTROY",
+ "DEVICE_FUNCTION_PRIVATE",
+};
+
+char *usbd_device_states[] = {
+ "STATE_INIT",
+ "STATE_CREATED",
+ "STATE_ATTACHED",
+ "STATE_POWERED",
+ "STATE_DEFAULT",
+ "STATE_ADDRESSED",
+ "STATE_CONFIGURED",
+ "STATE_UNKNOWN",
+};
+
+char *usbd_device_requests[] = {
+ "GET STATUS", /* 0 */
+ "CLEAR FEATURE", /* 1 */
+ "RESERVED", /* 2 */
+ "SET FEATURE", /* 3 */
+ "RESERVED", /* 4 */
+ "SET ADDRESS", /* 5 */
+ "GET DESCRIPTOR", /* 6 */
+ "SET DESCRIPTOR", /* 7 */
+ "GET CONFIGURATION", /* 8 */
+ "SET CONFIGURATION", /* 9 */
+ "GET INTERFACE", /* 10 */
+ "SET INTERFACE", /* 11 */
+ "SYNC FRAME", /* 12 */
+};
+
+char *usbd_device_descriptors[] = {
+ "UNKNOWN", /* 0 */
+ "DEVICE", /* 1 */
+ "CONFIG", /* 2 */
+ "STRING", /* 3 */
+ "INTERFACE", /* 4 */
+ "ENDPOINT", /* 5 */
+ "DEVICE QUALIFIER", /* 6 */
+ "OTHER SPEED", /* 7 */
+ "INTERFACE POWER", /* 8 */
+};
+
+char *usbd_device_status[] = {
+ "USBD_OPENING",
+ "USBD_OK",
+ "USBD_SUSPENDED",
+ "USBD_CLOSING",
+};
+
+
+/* Descriptor support functions ************************************************************** */
+
+
+/**
+ * usbd_get_string - find and return a string descriptor
+ * @index: string index to return
+ *
+ * Find an indexed string and return a pointer to a it.
+ */
+struct usb_string_descriptor *usbd_get_string (__u8 index)
+{
+ if (index >= maxstrings) {
+ return NULL;
+ }
+ return usb_strings[index];
+}
+
+
+/* Access to device descriptor functions ***************************************************** */
+
+
+/* *
+ * usbd_device_configuration_instance - find a configuration instance for this device
+ * @device:
+ * @configuration: index to configuration, 0 - N-1
+ *
+ * Get specifed device configuration. Index should be bConfigurationValue-1.
+ */
+static struct usb_configuration_instance *usbd_device_configuration_instance (struct usb_device_instance *device,
+ unsigned int port, unsigned int configuration)
+{
+ /* XXX */
+ configuration = configuration ? configuration - 1 : 0;
+
+ if (configuration >= device->configurations) {
+ return NULL;
+ }
+ return device->configuration_instance_array + configuration;
+}
+
+
+/* *
+ * usbd_device_interface_instance
+ * @device:
+ * @configuration: index to configuration, 0 - N-1
+ * @interface: index to interface
+ *
+ * Return the specified interface descriptor for the specified device.
+ */
+struct usb_interface_instance *usbd_device_interface_instance (struct usb_device_instance *device, int port, int configuration, int interface)
+{
+ struct usb_configuration_instance *configuration_instance;
+
+ if ((configuration_instance = usbd_device_configuration_instance (device, port, configuration)) == NULL) {
+ return NULL;
+ }
+ if (interface >= configuration_instance->interfaces) {
+ return NULL;
+ }
+ return configuration_instance->interface_instance_array + interface;
+}
+
+/* *
+ * usbd_device_alternate_descriptor_list
+ * @device:
+ * @configuration: index to configuration, 0 - N-1
+ * @interface: index to interface
+ * @alternate: alternate setting
+ *
+ * Return the specified alternate descriptor for the specified device.
+ */
+struct usb_alternate_instance *usbd_device_alternate_instance (struct usb_device_instance *device, int port, int configuration, int interface, int alternate)
+{
+ struct usb_interface_instance *interface_instance;
+
+ if ((interface_instance = usbd_device_interface_instance (device, port, configuration, interface)) == NULL) {
+ return NULL;
+ }
+
+ if (alternate >= interface_instance->alternates) {
+ return NULL;
+ }
+
+ return interface_instance->alternates_instance_array + alternate;
+}
+
+
+/* *
+ * usbd_device_device_descriptor
+ * @device: which device
+ * @configuration: index to configuration, 0 - N-1
+ * @port: which port
+ *
+ * Return the specified configuration descriptor for the specified device.
+ */
+struct usb_device_descriptor *usbd_device_device_descriptor (struct usb_device_instance *device, int port)
+{
+ return (device->device_descriptor);
+}
+
+
+/**
+ * usbd_device_configuration_descriptor
+ * @device: which device
+ * @port: which port
+ * @configuration: index to configuration, 0 - N-1
+ *
+ * Return the specified configuration descriptor for the specified device.
+ */
+struct usb_configuration_descriptor *usbd_device_configuration_descriptor (struct
+ usb_device_instance
+ *device, int port, int configuration)
+{
+ struct usb_configuration_instance *configuration_instance;
+ if (!(configuration_instance = usbd_device_configuration_instance (device, port, configuration))) {
+ return NULL;
+ }
+ return (configuration_instance->configuration_descriptor);
+}
+
+
+/**
+ * usbd_device_interface_descriptor
+ * @device: which device
+ * @port: which port
+ * @configuration: index to configuration, 0 - N-1
+ * @interface: index to interface
+ * @alternate: alternate setting
+ *
+ * Return the specified interface descriptor for the specified device.
+ */
+struct usb_interface_descriptor *usbd_device_interface_descriptor (struct usb_device_instance
+ *device, int port, int configuration, int interface, int alternate)
+{
+ struct usb_interface_instance *interface_instance;
+ if (!(interface_instance = usbd_device_interface_instance (device, port, configuration, interface))) {
+ return NULL;
+ }
+ if ((alternate < 0) || (alternate >= interface_instance->alternates)) {
+ return NULL;
+ }
+ return (interface_instance->alternates_instance_array[alternate].interface_descriptor);
+}
+
+/**
+ * usbd_device_endpoint_descriptor_index
+ * @device: which device
+ * @port: which port
+ * @configuration: index to configuration, 0 - N-1
+ * @interface: index to interface
+ * @alternate: index setting
+ * @index: which index
+ *
+ * Return the specified endpoint descriptor for the specified device.
+ */
+struct usb_endpoint_descriptor *usbd_device_endpoint_descriptor_index (struct usb_device_instance
+ *device, int port, int configuration, int interface, int alternate, int index)
+{
+ struct usb_alternate_instance *alternate_instance;
+
+ if (!(alternate_instance = usbd_device_alternate_instance (device, port, configuration, interface, alternate))) {
+ return NULL;
+ }
+ if (index >= alternate_instance->endpoints) {
+ return NULL;
+ }
+ return *(alternate_instance->endpoints_descriptor_array + index);
+}
+
+
+/**
+ * usbd_device_endpoint_transfersize
+ * @device: which device
+ * @port: which port
+ * @configuration: index to configuration, 0 - N-1
+ * @interface: index to interface
+ * @index: which index
+ *
+ * Return the specified endpoint transfer size;
+ */
+int usbd_device_endpoint_transfersize (struct usb_device_instance *device, int port, int configuration, int interface, int alternate, int index)
+{
+ struct usb_alternate_instance *alternate_instance;
+
+ if (!(alternate_instance = usbd_device_alternate_instance (device, port, configuration, interface, alternate))) {
+ return 0;
+ }
+ if (index >= alternate_instance->endpoints) {
+ return 0;
+ }
+ return *(alternate_instance->endpoint_transfersize_array + index);
+}
+
+
+/**
+ * usbd_device_endpoint_descriptor
+ * @device: which device
+ * @port: which port
+ * @configuration: index to configuration, 0 - N-1
+ * @interface: index to interface
+ * @alternate: alternate setting
+ * @endpoint: which endpoint
+ *
+ * Return the specified endpoint descriptor for the specified device.
+ */
+struct usb_endpoint_descriptor *usbd_device_endpoint_descriptor (struct usb_device_instance *device, int port, int configuration, int interface, int alternate, int endpoint)
+{
+ struct usb_endpoint_descriptor *endpoint_descriptor;
+ int i;
+
+ for (i = 0; !(endpoint_descriptor = usbd_device_endpoint_descriptor_index (device, port, configuration, interface, alternate, i)); i++) {
+ if (endpoint_descriptor->bEndpointAddress == endpoint) {
+ return endpoint_descriptor;
+ }
+ }
+ return NULL;
+}
+
+/**
+ * usbd_endpoint_halted
+ * @device: point to struct usb_device_instance
+ * @endpoint: endpoint to check
+ *
+ * Return non-zero if endpoint is halted.
+ */
+int usbd_endpoint_halted (struct usb_device_instance *device, int endpoint)
+{
+ return (device->status == USB_STATUS_HALT);
+}
+
+
+/**
+ * usbd_rcv_complete - complete a receive
+ * @endpoint:
+ * @len:
+ * @urb_bad:
+ *
+ * Called from rcv interrupt to complete.
+ */
+void usbd_rcv_complete(struct usb_endpoint_instance *endpoint, int len, int urb_bad)
+{
+ if (endpoint) {
+ struct urb *rcv_urb;
+
+ /*usbdbg("len: %d urb: %p\n", len, endpoint->rcv_urb); */
+
+ /* if we had an urb then update actual_length, dispatch if neccessary */
+ if ((rcv_urb = endpoint->rcv_urb)) {
+
+ /*usbdbg("actual: %d buffer: %d\n", */
+ /*rcv_urb->actual_length, rcv_urb->buffer_length); */
+
+ /* check the urb is ok, are we adding data less than the packetsize */
+ if (!urb_bad && (len <= endpoint->rcv_packetSize)) {
+ /*usbdbg("updating actual_length by %d\n",len); */
+
+ /* increment the received data size */
+ rcv_urb->actual_length += len;
+
+ } else {
+ usberr(" RECV_ERROR actual: %d buffer: %d urb_bad: %d\n",
+ rcv_urb->actual_length, rcv_urb->buffer_length, urb_bad);
+
+ rcv_urb->actual_length = 0;
+ rcv_urb->status = RECV_ERROR;
+ }
+ } else {
+ usberr("no rcv_urb!");
+ }
+ } else {
+ usberr("no endpoint!");
+ }
+
+}
+
+/**
+ * usbd_tx_complete - complete a transmit
+ * @endpoint:
+ * @resetart:
+ *
+ * Called from tx interrupt to complete.
+ */
+void usbd_tx_complete (struct usb_endpoint_instance *endpoint)
+{
+ if (endpoint) {
+ struct urb *tx_urb;
+
+ /* if we have a tx_urb advance or reset, finish if complete */
+ if ((tx_urb = endpoint->tx_urb)) {
+ int sent = endpoint->last;
+ endpoint->sent += sent;
+ endpoint->last -= sent;
+
+ if( (endpoint->tx_urb->actual_length - endpoint->sent) <= 0 ) {
+ tx_urb->actual_length = 0;
+ endpoint->sent = 0;
+ endpoint->last = 0;
+
+ /* Remove from active, save for re-use */
+ urb_detach(tx_urb);
+ urb_append(&endpoint->done, tx_urb);
+ /*usbdbg("done->next %p, tx_urb %p, done %p", */
+ /* endpoint->done.next, tx_urb, &endpoint->done); */
+
+ endpoint->tx_urb = first_urb_detached(&endpoint->tx);
+ if( endpoint->tx_urb ) {
+ endpoint->tx_queue--;
+ usbdbg("got urb from tx list");
+ }
+ if( !endpoint->tx_urb ) {
+ /*usbdbg("taking urb from done list"); */
+ endpoint->tx_urb = first_urb_detached(&endpoint->done);
+ }
+ if( !endpoint->tx_urb ) {
+ usbdbg("allocating new urb for tx_urb");
+ endpoint->tx_urb = usbd_alloc_urb(tx_urb->device, endpoint);
+ }
+ }
+ }
+ }
+}
+
+/* URB linked list functions ***************************************************** */
+
+/*
+ * Initialize an urb_link to be a single element list.
+ * If the urb_link is being used as a distinguished list head
+ * the list is empty when the head is the only link in the list.
+ */
+void urb_link_init (urb_link * ul)
+{
+ if (ul) {
+ ul->prev = ul->next = ul;
+ }
+}
+
+/*
+ * Detach an urb_link from a list, and set it
+ * up as a single element list, so no dangling
+ * pointers can be followed, and so it can be
+ * joined to another list if so desired.
+ */
+void urb_detach (struct urb *urb)
+{
+ if (urb) {
+ urb_link *ul = &urb->link;
+ ul->next->prev = ul->prev;
+ ul->prev->next = ul->next;
+ urb_link_init (ul);
+ }
+}
+
+/*
+ * Return the first urb_link in a list with a distinguished
+ * head "hd", or NULL if the list is empty. This will also
+ * work as a predicate, returning NULL if empty, and non-NULL
+ * otherwise.
+ */
+urb_link *first_urb_link (urb_link * hd)
+{
+ urb_link *nx;
+ if (NULL != hd && NULL != (nx = hd->next) && nx != hd) {
+ /* There is at least one element in the list */
+ /* (besides the distinguished head). */
+ return (nx);
+ }
+ /* The list is empty */
+ return (NULL);
+}
+
+/*
+ * Return the first urb in a list with a distinguished
+ * head "hd", or NULL if the list is empty.
+ */
+struct urb *first_urb (urb_link * hd)
+{
+ urb_link *nx;
+ if (NULL == (nx = first_urb_link (hd))) {
+ /* The list is empty */
+ return (NULL);
+ }
+ return (p2surround (struct urb, link, nx));
+}
+
+/*
+ * Detach and return the first urb in a list with a distinguished
+ * head "hd", or NULL if the list is empty.
+ *
+ */
+struct urb *first_urb_detached (urb_link * hd)
+{
+ struct urb *urb;
+ if ((urb = first_urb (hd))) {
+ urb_detach (urb);
+ }
+ return urb;
+}
+
+
+/*
+ * Append an urb_link (or a whole list of
+ * urb_links) to the tail of another list
+ * of urb_links.
+ */
+void urb_append (urb_link * hd, struct urb *urb)
+{
+ if (hd && urb) {
+ urb_link *new = &urb->link;
+
+ /* This allows the new urb to be a list of urbs, */
+ /* with new pointing at the first, but the link */
+ /* must be initialized. */
+ /* Order is important here... */
+ urb_link *pul = hd->prev;
+ new->prev->next = hd;
+ hd->prev = new->prev;
+ new->prev = pul;
+ pul->next = new;
+ }
+}
+
+/* URB create/destroy functions ***************************************************** */
+
+/**
+ * usbd_alloc_urb - allocate an URB appropriate for specified endpoint
+ * @device: device instance
+ * @endpoint: endpoint
+ *
+ * Allocate an urb structure. The usb device urb structure is used to
+ * contain all data associated with a transfer, including a setup packet for
+ * control transfers.
+ *
+ * NOTE: endpoint_address MUST contain a direction flag.
+ */
+struct urb *usbd_alloc_urb (struct usb_device_instance *device, struct usb_endpoint_instance *endpoint)
+{
+ struct urb *urb;
+
+ if( !(urb = (struct urb*)malloc(sizeof(struct urb))) ) {
+ usberr(" F A T A L: malloc(%u) FAILED!!!!", sizeof(struct urb));
+ return NULL;
+ }
+
+ /* Fill in known fields */
+ memset(urb, 0, sizeof(struct urb));
+ urb->endpoint = endpoint;
+ urb->device = device;
+ urb->buffer = (u8*)urb->buffer_data;
+ urb->buffer_length = sizeof(urb->buffer_data);
+
+ urb_link_init (&urb->link);
+
+ return urb;
+}
+
+/**
+ * usbd_dealloc_urb - deallocate an URB and associated buffer
+ * @urb: pointer to an urb structure
+ *
+ * Deallocate an urb structure and associated data.
+ */
+void usbd_dealloc_urb (struct urb *urb)
+{
+ if (urb) {
+ free (urb);
+ }
+}
+
+/* Event signaling functions ***************************************************** */
+
+/**
+ * usbd_device_event - called to respond to various usb events
+ * @device: pointer to struct device
+ * @event: event to respond to
+ *
+ * Used by a Bus driver to indicate an event.
+ */
+void usbd_device_event_irq (struct usb_device_instance *device, usb_device_event_t event, int data)
+{
+ usb_device_state_t state;
+
+ if (!device || !device->bus) {
+ usberr("(%p,%d) NULL device or device->bus", device, event);
+ return;
+ }
+
+ state = device->device_state;
+
+ usbinfo("%s", usbd_device_events[event]);
+
+ switch (event) {
+ case DEVICE_UNKNOWN:
+ break;
+ case DEVICE_INIT:
+ device->device_state = STATE_INIT;
+ break;
+
+ case DEVICE_CREATE:
+ device->device_state = STATE_ATTACHED;
+ break;
+
+ case DEVICE_HUB_CONFIGURED:
+ device->device_state = STATE_POWERED;
+ break;
+
+ case DEVICE_RESET:
+ device->device_state = STATE_DEFAULT;
+ device->address = 0;
+ break;
+
+ case DEVICE_ADDRESS_ASSIGNED:
+ device->device_state = STATE_ADDRESSED;
+ break;
+
+ case DEVICE_CONFIGURED:
+ device->device_state = STATE_CONFIGURED;
+ break;
+
+ case DEVICE_DE_CONFIGURED:
+ device->device_state = STATE_ADDRESSED;
+ break;
+
+ case DEVICE_BUS_INACTIVE:
+ if (device->status != USBD_CLOSING) {
+ device->status = USBD_SUSPENDED;
+ }
+ break;
+ case DEVICE_BUS_ACTIVITY:
+ if (device->status != USBD_CLOSING) {
+ device->status = USBD_OK;
+ }
+ break;
+
+ case DEVICE_SET_INTERFACE:
+ break;
+ case DEVICE_SET_FEATURE:
+ break;
+ case DEVICE_CLEAR_FEATURE:
+ break;
+
+ case DEVICE_POWER_INTERRUPTION:
+ device->device_state = STATE_POWERED;
+ break;
+ case DEVICE_HUB_RESET:
+ device->device_state = STATE_ATTACHED;
+ break;
+ case DEVICE_DESTROY:
+ device->device_state = STATE_UNKNOWN;
+ break;
+
+ case DEVICE_FUNCTION_PRIVATE:
+ break;
+
+ default:
+ usbdbg("event %d - not handled",event);
+ break;
+ }
+ /*usbdbg("%s event: %d oldstate: %d newstate: %d status: %d address: %d",
+ device->name, event, state,
+ device->device_state, device->status, device->address); */
+
+ /* tell the bus interface driver */
+ if( device->event ) {
+ /* usbdbg("calling device->event"); */
+ device->event(device, event, data);
+ }
+}
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Gerry Hamel, geh@ti.com, Texas Instruments
+ *
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, deckard@CodeHermit.ie
+ *
+ * Based on
+ * linux/drivers/usbd/ep0.c
+ *
+ * Copyright (c) 2000, 2001, 2002 Lineo
+ * Copyright (c) 2001 Hewlett Packard
+ *
+ * By:
+ * Stuart Lynne <sl@lineo.com>,
+ * Tom Rushworth <tbr@lineo.com>,
+ * Bruce Balden <balden@lineo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * This is the builtin ep0 control function. It implements all required functionality
+ * for responding to control requests (SETUP packets).
+ *
+ * XXX
+ *
+ * Currently we do not pass any SETUP packets (or other) to the configured
+ * function driver. This may need to change.
+ *
+ * XXX
+ *
+ * As alluded to above, a simple callback cdc_recv_setup has been implemented
+ * in the usb_device data structure to facilicate passing
+ * Common Device Class packets to a function driver.
+ *
+ * XXX
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_DEVICE)
+#include "usbdcore.h"
+
+#if 0
+#define dbg_ep0(lvl,fmt,args...) serial_printf("[%s] %s:%d: "fmt"\n",__FILE__,__FUNCTION__,__LINE__,##args)
+#else
+#define dbg_ep0(lvl,fmt,args...)
+#endif
+
+/* EP0 Configuration Set ********************************************************************* */
+
+
+/**
+ * ep0_get_status - fill in URB data with appropriate status
+ * @device:
+ * @urb:
+ * @index:
+ * @requesttype:
+ *
+ */
+static int ep0_get_status (struct usb_device_instance *device,
+ struct urb *urb, int index, int requesttype)
+{
+ char *cp;
+
+ urb->actual_length = 2;
+ cp = (char*)urb->buffer;
+ cp[0] = cp[1] = 0;
+
+ switch (requesttype) {
+ case USB_REQ_RECIPIENT_DEVICE:
+ cp[0] = USB_STATUS_SELFPOWERED;
+ break;
+ case USB_REQ_RECIPIENT_INTERFACE:
+ break;
+ case USB_REQ_RECIPIENT_ENDPOINT:
+ cp[0] = usbd_endpoint_halted (device, index);
+ break;
+ case USB_REQ_RECIPIENT_OTHER:
+ urb->actual_length = 0;
+ default:
+ break;
+ }
+ dbg_ep0 (2, "%02x %02x", cp[0], cp[1]);
+ return 0;
+}
+
+/**
+ * ep0_get_one
+ * @device:
+ * @urb:
+ * @result:
+ *
+ * Set a single byte value in the urb send buffer. Return non-zero to signal
+ * a request error.
+ */
+static int ep0_get_one (struct usb_device_instance *device, struct urb *urb,
+ __u8 result)
+{
+ urb->actual_length = 1; /* XXX 2? */
+ ((char *) urb->buffer)[0] = result;
+ return 0;
+}
+
+/**
+ * copy_config
+ * @urb: pointer to urb
+ * @data: pointer to configuration data
+ * @length: length of data
+ *
+ * Copy configuration data to urb transfer buffer if there is room for it.
+ */
+void copy_config (struct urb *urb, void *data, int max_length,
+ int max_buf)
+{
+ int available;
+ int length;
+
+ /*dbg_ep0(3, "-> actual: %d buf: %d max_buf: %d max_length: %d data: %p", */
+ /* urb->actual_length, urb->buffer_length, max_buf, max_length, data); */
+
+ if (!data) {
+ dbg_ep0 (1, "data is NULL");
+ return;
+ }
+ length = max_length;
+
+ if (length > max_length) {
+ dbg_ep0 (1, "length: %d >= max_length: %d", length,
+ max_length);
+ return;
+ }
+ /*dbg_ep0(1, " actual: %d buf: %d max_buf: %d max_length: %d length: %d", */
+ /* urb->actual_length, urb->buffer_length, max_buf, max_length, length); */
+
+ if ((available =
+ /*urb->buffer_length */ max_buf - urb->actual_length) <= 0) {
+ return;
+ }
+ /*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */
+ /* urb->actual_length, urb->buffer_length, max_buf, length, available); */
+
+ if (length > available) {
+ length = available;
+ }
+ /*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */
+ /* urb->actual_length, urb->buffer_length, max_buf, length, available); */
+
+ memcpy (urb->buffer + urb->actual_length, data, length);
+ urb->actual_length += length;
+
+ dbg_ep0 (3,
+ "copy_config: <- actual: %d buf: %d max_buf: %d max_length: %d available: %d",
+ urb->actual_length, urb->buffer_length, max_buf, max_length,
+ available);
+}
+
+/**
+ * ep0_get_descriptor
+ * @device:
+ * @urb:
+ * @max:
+ * @descriptor_type:
+ * @index:
+ *
+ * Called by ep0_rx_process for a get descriptor device command. Determine what
+ * descriptor is being requested, copy to send buffer. Return zero if ok to send,
+ * return non-zero to signal a request error.
+ */
+static int ep0_get_descriptor (struct usb_device_instance *device,
+ struct urb *urb, int max, int descriptor_type,
+ int index)
+{
+ int port = 0; /* XXX compound device */
+ char *cp;
+
+ /*dbg_ep0(3, "max: %x type: %x index: %x", max, descriptor_type, index); */
+
+ if (!urb || !urb->buffer || !urb->buffer_length
+ || (urb->buffer_length < 255)) {
+ dbg_ep0 (2, "invalid urb %p", urb);
+ return -1L;
+ }
+
+ /* setup tx urb */
+ urb->actual_length = 0;
+ cp = (char*)urb->buffer;
+
+ dbg_ep0 (2, "%s", USBD_DEVICE_DESCRIPTORS (descriptor_type));
+
+ switch (descriptor_type) {
+ case USB_DESCRIPTOR_TYPE_DEVICE:
+ {
+ struct usb_device_descriptor *device_descriptor;
+ if (!
+ (device_descriptor =
+ usbd_device_device_descriptor (device, port))) {
+ return -1;
+ }
+ /* copy descriptor for this device */
+ copy_config (urb, device_descriptor,
+ sizeof (struct usb_device_descriptor),
+ max);
+
+ /* correct the correct control endpoint 0 max packet size into the descriptor */
+ device_descriptor =
+ (struct usb_device_descriptor *) urb->buffer;
+
+ }
+ dbg_ep0(3, "copied device configuration, actual_length: 0x%x", urb->actual_length);
+ break;
+
+ case USB_DESCRIPTOR_TYPE_CONFIGURATION:
+ {
+ struct usb_configuration_descriptor
+ *configuration_descriptor;
+ struct usb_device_descriptor *device_descriptor;
+ if (!
+ (device_descriptor =
+ usbd_device_device_descriptor (device, port))) {
+ return -1;
+ }
+ /*dbg_ep0(2, "%d %d", index, device_descriptor->bNumConfigurations); */
+ if (index > device_descriptor->bNumConfigurations) {
+ dbg_ep0 (0, "index too large: %d > %d", index,
+ device_descriptor->
+ bNumConfigurations);
+ return -1;
+ }
+
+ if (!
+ (configuration_descriptor =
+ usbd_device_configuration_descriptor (device,
+ port,
+ index))) {
+ dbg_ep0 (0,
+ "usbd_device_configuration_descriptor failed: %d",
+ index);
+ return -1;
+ }
+ dbg_ep0(0, "attempt to copy %d bytes to urb\n",cpu_to_le16(configuration_descriptor->wTotalLength));
+ copy_config (urb, configuration_descriptor,
+
+ cpu_to_le16(configuration_descriptor->wTotalLength),
+ max);
+ }
+
+ break;
+
+ case USB_DESCRIPTOR_TYPE_STRING:
+ {
+ struct usb_string_descriptor *string_descriptor;
+ if (!(string_descriptor = usbd_get_string (index))) {
+ serial_printf("Invalid string index %d\n", index);
+ return -1;
+ }
+ dbg_ep0(3, "string_descriptor: %p length %d", string_descriptor, string_descriptor->bLength);
+ copy_config (urb, string_descriptor, string_descriptor->bLength, max);
+ }
+ break;
+ case USB_DESCRIPTOR_TYPE_INTERFACE:
+ serial_printf("USB_DESCRIPTOR_TYPE_INTERFACE - error not implemented\n");
+ return -1;
+ case USB_DESCRIPTOR_TYPE_ENDPOINT:
+ serial_printf("USB_DESCRIPTOR_TYPE_ENDPOINT - error not implemented\n");
+ return -1;
+ case USB_DESCRIPTOR_TYPE_HID:
+ {
+ serial_printf("USB_DESCRIPTOR_TYPE_HID - error not implemented\n");
+ return -1; /* unsupported at this time */
+#if 0
+ int bNumInterface =
+ le16_to_cpu (urb->device_request.wIndex);
+ int bAlternateSetting = 0;
+ int class = 0;
+ struct usb_class_descriptor *class_descriptor;
+
+ if (!(class_descriptor =
+ usbd_device_class_descriptor_index (device,
+ port, 0,
+ bNumInterface,
+ bAlternateSetting,
+ class))
+ || class_descriptor->descriptor.hid.bDescriptorType != USB_DT_HID) {
+ dbg_ep0 (3, "[%d] interface is not HID",
+ bNumInterface);
+ return -1;
+ }
+ /* copy descriptor for this class */
+ copy_config (urb, class_descriptor,
+ class_descriptor->descriptor.hid.bLength,
+ max);
+#endif
+ }
+ break;
+ case USB_DESCRIPTOR_TYPE_REPORT:
+ {
+ serial_printf("USB_DESCRIPTOR_TYPE_REPORT - error not implemented\n");
+ return -1; /* unsupported at this time */
+#if 0
+ int bNumInterface =
+ le16_to_cpu (urb->device_request.wIndex);
+ int bAlternateSetting = 0;
+ int class = 0;
+ struct usb_class_report_descriptor *report_descriptor;
+
+ if (!(report_descriptor =
+ usbd_device_class_report_descriptor_index
+ (device, port, 0, bNumInterface,
+ bAlternateSetting, class))
+ || report_descriptor->bDescriptorType !=
+ USB_DT_REPORT) {
+ dbg_ep0 (3, "[%d] descriptor is not REPORT",
+ bNumInterface);
+ return -1;
+ }
+ /* copy report descriptor for this class */
+ /*copy_config(urb, &report_descriptor->bData[0], report_descriptor->wLength, max); */
+ if (max - urb->actual_length > 0) {
+ int length =
+ MIN (report_descriptor->wLength,
+ max - urb->actual_length);
+ memcpy (urb->buffer + urb->actual_length,
+ &report_descriptor->bData[0], length);
+ urb->actual_length += length;
+ }
+#endif
+ }
+ break;
+ case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER:
+ {
+ /* If a USB device supports both a full speed and low speed operation
+ * we must send a Device_Qualifier descriptor here
+ */
+ return -1;
+ }
+ default:
+ return -1;
+ }
+
+
+ dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d tx_packetSize: %2d",
+ urb->buffer, urb->buffer_length, urb->actual_length,
+ device->bus->endpoint_array[0].tx_packetSize);
+/*
+ if ((urb->actual_length < max) && !(urb->actual_length % device->bus->endpoint_array[0].tx_packetSize)) {
+ dbg_ep0(0, "adding null byte");
+ urb->buffer[urb->actual_length++] = 0;
+ dbg_ep0(0, "urb: buffer_length: %2d actual_length: %2d packet size: %2d",
+ urb->buffer_length, urb->actual_length device->bus->endpoint_array[0].tx_packetSize);
+ }
+*/
+ return 0;
+
+}
+
+/**
+ * ep0_recv_setup - called to indicate URB has been received
+ * @urb: pointer to struct urb
+ *
+ * Check if this is a setup packet, process the device request, put results
+ * back into the urb and return zero or non-zero to indicate success (DATA)
+ * or failure (STALL).
+ *
+ */
+int ep0_recv_setup (struct urb *urb)
+{
+ /*struct usb_device_request *request = urb->buffer; */
+ /*struct usb_device_instance *device = urb->device; */
+
+ struct usb_device_request *request;
+ struct usb_device_instance *device;
+ int address;
+
+ dbg_ep0 (0, "entering ep0_recv_setup()");
+ if (!urb || !urb->device) {
+ dbg_ep0 (3, "invalid URB %p", urb);
+ return -1;
+ }
+
+ request = &urb->device_request;
+ device = urb->device;
+
+ dbg_ep0 (3, "urb: %p device: %p", urb, urb->device);
+
+
+ /*dbg_ep0(2, "- - - - - - - - - -"); */
+
+ dbg_ep0 (2,
+ "bmRequestType:%02x bRequest:%02x wValue:%04x wIndex:%04x wLength:%04x %s",
+ request->bmRequestType, request->bRequest,
+ le16_to_cpu (request->wValue), le16_to_cpu (request->wIndex),
+ le16_to_cpu (request->wLength),
+ USBD_DEVICE_REQUESTS (request->bRequest));
+
+ /* handle USB Standard Request (c.f. USB Spec table 9-2) */
+ if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) {
+ if(device->device_state <= STATE_CONFIGURED){
+ /* Attempt to handle a CDC specific request if we are
+ * in the configured state.
+ */
+ return device->cdc_recv_setup(request,urb);
+ }
+ dbg_ep0 (1, "non standard request: %x",
+ request->bmRequestType & USB_REQ_TYPE_MASK);
+ return -1; /* Stall here */
+ }
+
+ switch (device->device_state) {
+ case STATE_CREATED:
+ case STATE_ATTACHED:
+ case STATE_POWERED:
+ /* It actually is important to allow requests in these states,
+ * Windows will request descriptors before assigning an
+ * address to the client.
+ */
+
+ /*dbg_ep0 (1, "request %s not allowed in this state: %s", */
+ /* USBD_DEVICE_REQUESTS(request->bRequest), */
+ /* usbd_device_states[device->device_state]); */
+ /*return -1; */
+ break;
+
+ case STATE_INIT:
+ case STATE_DEFAULT:
+ switch (request->bRequest) {
+ case USB_REQ_GET_STATUS:
+ case USB_REQ_GET_INTERFACE:
+ case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_REQ_SET_FEATURE:
+ case USB_REQ_SET_DESCRIPTOR:
+ /* case USB_REQ_SET_CONFIGURATION: */
+ case USB_REQ_SET_INTERFACE:
+ dbg_ep0 (1,
+ "request %s not allowed in DEFAULT state: %s",
+ USBD_DEVICE_REQUESTS (request->bRequest),
+ usbd_device_states[device->device_state]);
+ return -1;
+
+ case USB_REQ_SET_CONFIGURATION:
+ case USB_REQ_SET_ADDRESS:
+ case USB_REQ_GET_DESCRIPTOR:
+ case USB_REQ_GET_CONFIGURATION:
+ break;
+ }
+ case STATE_ADDRESSED:
+ case STATE_CONFIGURED:
+ break;
+ case STATE_UNKNOWN:
+ dbg_ep0 (1, "request %s not allowed in UNKNOWN state: %s",
+ USBD_DEVICE_REQUESTS (request->bRequest),
+ usbd_device_states[device->device_state]);
+ return -1;
+ }
+
+ /* handle all requests that return data (direction bit set on bm RequestType) */
+ if ((request->bmRequestType & USB_REQ_DIRECTION_MASK)) {
+
+ dbg_ep0 (3, "Device-to-Host");
+
+ switch (request->bRequest) {
+
+ case USB_REQ_GET_STATUS:
+ return ep0_get_status (device, urb, request->wIndex,
+ request->bmRequestType &
+ USB_REQ_RECIPIENT_MASK);
+
+ case USB_REQ_GET_DESCRIPTOR:
+ return ep0_get_descriptor (device, urb,
+ le16_to_cpu (request->wLength),
+ le16_to_cpu (request->wValue) >> 8,
+ le16_to_cpu (request->wValue) & 0xff);
+
+ case USB_REQ_GET_CONFIGURATION:
+ serial_printf("get config %d\n", device->configuration);
+ return ep0_get_one (device, urb,
+ device->configuration);
+
+ case USB_REQ_GET_INTERFACE:
+ return ep0_get_one (device, urb, device->alternate);
+
+ case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
+ return -1;
+
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_REQ_SET_FEATURE:
+ case USB_REQ_SET_ADDRESS:
+ case USB_REQ_SET_DESCRIPTOR:
+ case USB_REQ_SET_CONFIGURATION:
+ case USB_REQ_SET_INTERFACE:
+ return -1;
+ }
+ }
+ /* handle the requests that do not return data */
+ else {
+
+
+ /*dbg_ep0(3, "Host-to-Device"); */
+ switch (request->bRequest) {
+
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_REQ_SET_FEATURE:
+ dbg_ep0 (0, "Host-to-Device");
+ switch (request->
+ bmRequestType & USB_REQ_RECIPIENT_MASK) {
+ case USB_REQ_RECIPIENT_DEVICE:
+ /* XXX DEVICE_REMOTE_WAKEUP or TEST_MODE would be added here */
+ /* XXX fall through for now as we do not support either */
+ case USB_REQ_RECIPIENT_INTERFACE:
+ case USB_REQ_RECIPIENT_OTHER:
+ dbg_ep0 (0, "request %s not",
+ USBD_DEVICE_REQUESTS (request->bRequest));
+ default:
+ return -1;
+
+ case USB_REQ_RECIPIENT_ENDPOINT:
+ dbg_ep0 (0, "ENDPOINT: %x", le16_to_cpu (request->wValue));
+ if (le16_to_cpu (request->wValue) == USB_ENDPOINT_HALT) {
+ /*return usbd_device_feature (device, le16_to_cpu (request->wIndex), */
+ /* request->bRequest == USB_REQ_SET_FEATURE); */
+ /* NEED TO IMPLEMENT THIS!!! */
+ return -1;
+ } else {
+ dbg_ep0 (1, "request %s bad wValue: %04x",
+ USBD_DEVICE_REQUESTS
+ (request->bRequest),
+ le16_to_cpu (request->wValue));
+ return -1;
+ }
+ }
+
+ case USB_REQ_SET_ADDRESS:
+ /* check if this is a re-address, reset first if it is (this shouldn't be possible) */
+ if (device->device_state != STATE_DEFAULT) {
+ dbg_ep0 (1, "set_address: %02x state: %s",
+ le16_to_cpu (request->wValue),
+ usbd_device_states[device->device_state]);
+ return -1;
+ }
+ address = le16_to_cpu (request->wValue);
+ if ((address & 0x7f) != address) {
+ dbg_ep0 (1, "invalid address %04x %04x",
+ address, address & 0x7f);
+ return -1;
+ }
+ device->address = address;
+
+ /*dbg_ep0(2, "address: %d %d %d", */
+ /* request->wValue, le16_to_cpu(request->wValue), device->address); */
+
+ return 0;
+
+ case USB_REQ_SET_DESCRIPTOR: /* XXX should we support this? */
+ dbg_ep0 (0, "set descriptor: NOT SUPPORTED");
+ return -1;
+
+ case USB_REQ_SET_CONFIGURATION:
+ /* c.f. 9.4.7 - the top half of wValue is reserved */
+ /* */
+ if ((device->configuration =
+ le16_to_cpu (request->wValue) & 0xFF80) != 0) {
+ /* c.f. 9.4.7 - zero is the default or addressed state, in our case this */
+ /* is the same is configuration zero */
+ serial_printf("error setting dev->config to zero!\n");
+ device->configuration = 0; /* TBR - ?????? */
+ }
+ /* reset interface and alternate settings */
+ device->interface = device->alternate = 0;
+
+ /*dbg_ep0(2, "set configuration: %d", device->configuration); */
+ /*serial_printf("DEVICE_CONFIGURED.. event?\n"); */
+ return 0;
+
+ case USB_REQ_SET_INTERFACE:
+ device->interface = le16_to_cpu (request->wIndex);
+ device->alternate = le16_to_cpu (request->wValue);
+ /*dbg_ep0(2, "set interface: %d alternate: %d", device->interface, device->alternate); */
+ serial_printf ("DEVICE_SET_INTERFACE.. event?\n");
+ return 0;
+
+ case USB_REQ_GET_STATUS:
+ case USB_REQ_GET_DESCRIPTOR:
+ case USB_REQ_GET_CONFIGURATION:
+ case USB_REQ_GET_INTERFACE:
+ case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
+ return -1;
+ }
+ }
+ return -1;
+}
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2006 by Bryan O'Donoghue, CodeHermit
+ * bodonoghue@CodeHermit.ie
+ *
+ * References
+ * DasUBoot/drivers/usbdcore_omap1510.c, for design and implementation ideas.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+/*
+ * Notes :
+ * 1. #define __SIMULATE_ERROR__ to inject a CRC error into every 2nd TX
+ * packet to force the USB re-transmit protocol.
+ *
+ * 2. #define __DEBUG_UDC__ to switch on debug tracing to serial console
+ * be careful that tracing doesn't create Hiesen-bugs with respect to
+ * response timeouts to control requests.
+ *
+ * 3. This driver should be able to support any higher level driver that
+ * that wants to do either of the two standard UDC implementations
+ * Control-Bulk-Interrupt or Bulk-IN/Bulk-Out standards. Hence
+ * gserial and cdc_acm should work with this code.
+ *
+ * 4. NAK events never actually get raised at all, the documentation
+ * is just wrong !
+ *
+ * 5. For some reason, cbd_datlen is *always* +2 the value it should be.
+ * this means that having an RX cbd of 16 bytes is not possible, since
+ * the same size is reported for 14 bytes received as 16 bytes received
+ * until we can find out why this happens, RX cbds must be limited to 8
+ * bytes. TODO: check errata for this behaviour.
+ *
+ * 6. Right now this code doesn't support properly powering up with the USB
+ * cable attached to the USB host my development board the Adder87x doesn't
+ * have a pull-up fitted to allow this, so it is necessary to power the
+ * board and *then* attached the USB cable to the host. However somebody
+ * with a different design in their board may be able to keep the cable
+ * constantly connected and simply enable/disable a pull-up re
+ * figure 31.1 in MPC885RM.pdf instead of having to power up the board and
+ * then attach the cable !
+ *
+ */
+#include <common.h>
+#include <config.h>
+
+#if defined(CONFIG_MPC885_FAMILY) && defined(CONFIG_USB_DEVICE)
+#include <commproc.h>
+#include "usbdcore.h"
+#include "usbdcore_mpc8xx.h"
+#include "usbdcore_ep0.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define ERR(fmt, args...)\
+ serial_printf("ERROR : [%s] %s:%d: "fmt,\
+ __FILE__,__FUNCTION__,__LINE__, ##args)
+#ifdef __DEBUG_UDC__
+#define DBG(fmt,args...)\
+ serial_printf("[%s] %s:%d: "fmt,\
+ __FILE__,__FUNCTION__,__LINE__, ##args)
+#else
+#define DBG(fmt,args...)
+#endif
+
+/* Static Data */
+#ifdef __SIMULATE_ERROR__
+static char err_poison_test = 0;
+#endif
+static struct mpc8xx_ep ep_ref[MAX_ENDPOINTS];
+static u32 address_base = STATE_NOT_READY;
+static mpc8xx_udc_state_t udc_state = 0;
+static struct usb_device_instance *udc_device = 0;
+static volatile usb_epb_t *endpoints[MAX_ENDPOINTS];
+static volatile cbd_t *tx_cbd[TX_RING_SIZE];
+static volatile cbd_t *rx_cbd[RX_RING_SIZE];
+static volatile immap_t *immr = 0;
+static volatile cpm8xx_t *cp = 0;
+static volatile usb_pram_t *usb_paramp = 0;
+static volatile usb_t *usbp = 0;
+static int rx_ct = 0;
+static int tx_ct = 0;
+
+/* Static Function Declarations */
+static void mpc8xx_udc_state_transition_up (usb_device_state_t initial,
+ usb_device_state_t final);
+static void mpc8xx_udc_state_transition_down (usb_device_state_t initial,
+ usb_device_state_t final);
+static void mpc8xx_udc_stall (unsigned int ep);
+static void mpc8xx_udc_flush_tx_fifo (int epid);
+static void mpc8xx_udc_flush_rx_fifo (void);
+static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi,
+ struct urb *tx_urb);
+static void mpc8xx_udc_dump_request (struct usb_device_request *request);
+static void mpc8xx_udc_clock_init (volatile immap_t * immr,
+ volatile cpm8xx_t * cp);
+static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi);
+static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_cbd_init (void);
+static void mpc8xx_udc_endpoint_init (void);
+static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size);
+static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment);
+static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_set_nak (unsigned int ep);
+static short mpc8xx_udc_handle_txerr (void);
+static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid);
+
+/******************************************************************************
+ Global Linkage
+ *****************************************************************************/
+
+/* udc_init
+ *
+ * Do initial bus gluing
+ */
+int udc_init (void)
+{
+ /* Init various pointers */
+ immr = (immap_t *) CFG_IMMR;
+ cp = (cpm8xx_t *) & (immr->im_cpm);
+ usb_paramp = (usb_pram_t *) & (cp->cp_dparam[PROFF_USB]);
+ usbp = (usb_t *) & (cp->cp_scc[0]);
+
+ memset (ep_ref, 0x00, (sizeof (struct mpc8xx_ep) * MAX_ENDPOINTS));
+
+ udc_device = 0;
+ udc_state = STATE_NOT_READY;
+
+ usbp->usmod = 0x00;
+ usbp->uscom = 0;
+
+ /* Set USB Frame #0, Respond at Address & Get a clock source */
+ usbp->usaddr = 0x00;
+ mpc8xx_udc_clock_init (immr, cp);
+
+ /* PA15, PA14 as perhiperal USBRXD and USBOE */
+ immr->im_ioport.iop_padir &= ~0x0003;
+ immr->im_ioport.iop_papar |= 0x0003;
+
+ /* PC11/PC10 as peripheral USBRXP USBRXN */
+ immr->im_ioport.iop_pcso |= 0x0030;
+
+ /* PC7/PC6 as perhiperal USBTXP and USBTXN */
+ immr->im_ioport.iop_pcdir |= 0x0300;
+ immr->im_ioport.iop_pcpar |= 0x0300;
+
+ /* Set the base address */
+ address_base = (u32) (cp->cp_dpmem + CPM_USB_BASE);
+
+ /* Initialise endpoints and circular buffers */
+ mpc8xx_udc_endpoint_init ();
+ mpc8xx_udc_cbd_init ();
+
+ /* Assign allocated Dual Port Endpoint descriptors */
+ usb_paramp->ep0ptr = (u32) endpoints[0];
+ usb_paramp->ep1ptr = (u32) endpoints[1];
+ usb_paramp->ep2ptr = (u32) endpoints[2];
+ usb_paramp->ep3ptr = (u32) endpoints[3];
+ usb_paramp->frame_n = 0;
+
+ DBG ("ep0ptr=0x%08x ep1ptr=0x%08x ep2ptr=0x%08x ep3ptr=0x%08x\n",
+ usb_paramp->ep0ptr, usb_paramp->ep1ptr, usb_paramp->ep2ptr,
+ usb_paramp->ep3ptr);
+
+ return 0;
+}
+
+/* udc_irq
+ *
+ * Poll for whatever events may have occured
+ */
+void udc_irq (void)
+{
+ int epid = 0;
+ volatile cbd_t *rx_cbdp = 0;
+ volatile cbd_t *rx_cbdp_base = 0;
+
+ if (udc_state != STATE_READY) {
+ return;
+ }
+
+ if (usbp->usber & USB_E_BSY) {
+ /* This shouldn't happen. If it does then it's a bug ! */
+ usbp->usber |= USB_E_BSY;
+ mpc8xx_udc_flush_rx_fifo ();
+ }
+
+ /* Scan all RX/Bidirectional Endpoints for RX data. */
+ for (epid = 0; epid < MAX_ENDPOINTS; epid++) {
+ if (!ep_ref[epid].prx) {
+ continue;
+ }
+ rx_cbdp = rx_cbdp_base = ep_ref[epid].prx;
+
+ do {
+ if (!(rx_cbdp->cbd_sc & RX_BD_E)) {
+
+ if (rx_cbdp->cbd_sc & 0x1F) {
+ /* Corrupt data discard it.
+ * Controller has NAK'd this packet.
+ */
+ mpc8xx_udc_clear_rxbd (rx_cbdp);
+
+ } else {
+ if (!epid) {
+ mpc8xx_udc_ep0_rx (rx_cbdp);
+
+ } else {
+ /* Process data */
+ mpc8xx_udc_set_nak (epid);
+ mpc8xx_udc_epn_rx (epid, rx_cbdp);
+ mpc8xx_udc_clear_rxbd (rx_cbdp);
+ }
+ }
+
+ /* Advance RX CBD pointer */
+ mpc8xx_udc_advance_rx (&rx_cbdp, epid);
+ ep_ref[epid].prx = rx_cbdp;
+ } else {
+ /* Advance RX CBD pointer */
+ mpc8xx_udc_advance_rx (&rx_cbdp, epid);
+ }
+
+ } while (rx_cbdp != rx_cbdp_base);
+ }
+
+ /* Handle TX events as appropiate, the correct place to do this is
+ * in a tx routine. Perhaps TX on epn was pre-empted by ep0
+ */
+
+ if (usbp->usber & USB_E_TXB) {
+ usbp->usber |= USB_E_TXB;
+ }
+
+ if (usbp->usber & (USB_TX_ERRMASK)) {
+ mpc8xx_udc_handle_txerr ();
+ }
+
+ /* Switch to the default state, respond at the default address */
+ if (usbp->usber & USB_E_RESET) {
+ usbp->usber |= USB_E_RESET;
+ usbp->usaddr = 0x00;
+ udc_device->device_state = STATE_DEFAULT;
+ }
+
+ /* if(usbp->usber&USB_E_IDLE){
+ We could suspend here !
+ usbp->usber|=USB_E_IDLE;
+ DBG("idle state change\n");
+ }
+ if(usbp->usbs){
+ We could resume here when IDLE is deasserted !
+ Not worth doing, so long as we are self powered though.
+ }
+ */
+
+ return;
+}
+
+/* udc_endpoint_write
+ *
+ * Write some data to an endpoint
+ */
+int udc_endpoint_write (struct usb_endpoint_instance *epi)
+{
+ int ep = 0;
+ short epid = 1, unnak = 0, ret = 0;
+
+ if (udc_state != STATE_READY) {
+ ERR ("invalid udc_state != STATE_READY!\n");
+ return -1;
+ }
+
+ if (!udc_device || !epi) {
+ return -1;
+ }
+
+ if (udc_device->device_state != STATE_CONFIGURED) {
+ return -1;
+ }
+
+ ep = epi->endpoint_address & 0x03;
+ if (ep >= MAX_ENDPOINTS) {
+ return -1;
+ }
+
+ /* Set NAK for all RX endpoints during TX */
+ for (epid = 1; epid < MAX_ENDPOINTS; epid++) {
+
+ /* Don't set NAK on DATA IN/CONTROL endpoints */
+ if (ep_ref[epid].sc & USB_DIR_IN) {
+ continue;
+ }
+
+ if (!(usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK))) {
+ unnak |= 1 << epid;
+ }
+
+ mpc8xx_udc_set_nak (epid);
+ }
+
+ mpc8xx_udc_init_tx (&udc_device->bus->endpoint_array[ep],
+ epi->tx_urb);
+ ret = mpc8xx_udc_ep_tx (&udc_device->bus->endpoint_array[ep]);
+
+ /* Remove temporary NAK */
+ for (epid = 1; epid < MAX_ENDPOINTS; epid++) {
+ if (unnak & (1 << epid)) {
+ udc_unset_nak (epid);
+ }
+ }
+
+ return ret;
+}
+
+/* mpc8xx_udc_assign_urb
+ *
+ * Associate a given urb to an endpoint TX or RX transmit/receive buffers
+ */
+static int mpc8xx_udc_assign_urb (int ep, char direction)
+{
+ struct usb_endpoint_instance *epi = 0;
+
+ if (ep >= MAX_ENDPOINTS) {
+ goto err;
+ }
+ epi = &udc_device->bus->endpoint_array[ep];
+ if (!epi) {
+ goto err;
+ }
+
+ if (!ep_ref[ep].urb) {
+ ep_ref[ep].urb = usbd_alloc_urb (udc_device, udc_device->bus->endpoint_array);
+ if (!ep_ref[ep].urb) {
+ goto err;
+ }
+ } else {
+ ep_ref[ep].urb->actual_length = 0;
+ }
+
+ switch (direction) {
+ case USB_DIR_IN:
+ epi->tx_urb = ep_ref[ep].urb;
+ break;
+ case USB_DIR_OUT:
+ epi->rcv_urb = ep_ref[ep].urb;
+ break;
+ default:
+ goto err;
+ }
+ return 0;
+
+ err:
+ udc_state = STATE_ERROR;
+ return -1;
+}
+
+/* udc_setup_ep
+ *
+ * Associate U-Boot software endpoints to mpc8xx endpoint parameter ram
+ * Isochronous endpoints aren't yet supported!
+ */
+void udc_setup_ep (struct usb_device_instance *device, unsigned int ep,
+ struct usb_endpoint_instance *epi)
+{
+ uchar direction = 0;
+ int ep_attrib = 0;
+
+ if (epi && (ep < MAX_ENDPOINTS)) {
+
+ if (ep == 0) {
+ if (epi->rcv_attributes != USB_ENDPOINT_XFER_CONTROL
+ || epi->tx_attributes !=
+ USB_ENDPOINT_XFER_CONTROL) {
+
+ /* ep0 must be a control endpoint */
+ udc_state = STATE_ERROR;
+ return;
+
+ }
+ if (!(ep_ref[ep].sc & EP_ATTACHED)) {
+ mpc8xx_udc_cbd_attach (ep, epi->tx_packetSize,
+ epi->rcv_packetSize);
+ }
+ usbp->usep[ep] = 0x0000;
+ return;
+ }
+
+ if ((epi->endpoint_address & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_IN) {
+
+ direction = 1;
+ ep_attrib = epi->tx_attributes;
+ epi->rcv_packetSize = 0;
+ ep_ref[ep].sc |= USB_DIR_IN;
+ } else {
+
+ direction = 0;
+ ep_attrib = epi->rcv_attributes;
+ epi->tx_packetSize = 0;
+ ep_ref[ep].sc &= ~USB_DIR_IN;
+ }
+
+ if (mpc8xx_udc_assign_urb (ep, epi->endpoint_address
+ & USB_ENDPOINT_DIR_MASK)) {
+ return;
+ }
+
+ switch (ep_attrib) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ if (!(ep_ref[ep].sc & EP_ATTACHED)) {
+ mpc8xx_udc_cbd_attach (ep,
+ epi->tx_packetSize,
+ epi->rcv_packetSize);
+ }
+ usbp->usep[ep] = ep << 12;
+ epi->rcv_urb = epi->tx_urb = ep_ref[ep].urb;
+
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ case USB_ENDPOINT_XFER_INT:
+ if (!(ep_ref[ep].sc & EP_ATTACHED)) {
+ if (direction) {
+ mpc8xx_udc_cbd_attach (ep,
+ epi->tx_packetSize,
+ 0);
+ } else {
+ mpc8xx_udc_cbd_attach (ep,
+ 0,
+ epi->rcv_packetSize);
+ }
+ }
+ usbp->usep[ep] = (ep << 12) | ((ep_attrib) << 8);
+
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ default:
+ serial_printf ("Error endpoint attrib %d>3\n", ep_attrib);
+ udc_state = STATE_ERROR;
+ break;
+ }
+ }
+
+}
+
+/* udc_connect
+ *
+ * Move state, switch on the USB
+ */
+void udc_connect (void)
+{
+ /* Enable pull-up resistor on D+
+ * TODO: fit a pull-up resistor to drive SE0 for > 2.5us
+ */
+
+ if (udc_state != STATE_ERROR) {
+ udc_state = STATE_READY;
+ usbp->usmod |= USMOD_EN;
+ }
+}
+
+/* udc_disconnect
+ *
+ * Disconnect is not used but, is included for completeness
+ */
+void udc_disconnect (void)
+{
+ /* Disable pull-up resistor on D-
+ * TODO: fix a pullup resistor to control this
+ */
+
+ if (udc_state != STATE_ERROR) {
+ udc_state = STATE_NOT_READY;
+ }
+ usbp->usmod &= ~USMOD_EN;
+}
+
+/* udc_enable
+ *
+ * Grab an EP0 URB, register interest in a subset of USB events
+ */
+void udc_enable (struct usb_device_instance *device)
+{
+ if (udc_state == STATE_ERROR) {
+ return;
+ }
+
+ udc_device = device;
+
+ if (!ep_ref[0].urb) {
+ ep_ref[0].urb = usbd_alloc_urb (device, device->bus->endpoint_array);
+ }
+
+ /* Register interest in all events except SOF, enable transceiver */
+ usbp->usber = 0x03FF;
+ usbp->usbmr = 0x02F7;
+
+ return;
+}
+
+/* udc_disable
+ *
+ * disable the currently hooked device
+ */
+void udc_disable (void)
+{
+ int i = 0;
+
+ if (udc_state == STATE_ERROR) {
+ DBG ("Won't disable UDC. udc_state==STATE_ERROR !\n");
+ return;
+ }
+
+ udc_device = 0;
+
+ for (; i < MAX_ENDPOINTS; i++) {
+ if (ep_ref[i].urb) {
+ usbd_dealloc_urb (ep_ref[i].urb);
+ ep_ref[i].urb = 0;
+ }
+ }
+
+ usbp->usbmr = 0x00;
+ usbp->usmod = ~USMOD_EN;
+ udc_state = STATE_NOT_READY;
+}
+
+/* udc_startup_events
+ *
+ * Enable the specified device
+ */
+void udc_startup_events (struct usb_device_instance *device)
+{
+ udc_enable (device);
+ if (udc_state == STATE_READY) {
+ usbd_device_event_irq (device, DEVICE_CREATE, 0);
+ }
+}
+
+/* udc_set_nak
+ *
+ * Allow upper layers to signal lower layers should not accept more RX data
+ *
+ */
+void udc_set_nak (int epid)
+{
+ if (epid) {
+ mpc8xx_udc_set_nak (epid);
+ }
+}
+
+/* udc_unset_nak
+ *
+ * Suspend sending of NAK tokens for DATA OUT tokens on a given endpoint.
+ * Switch off NAKing on this endpoint to accept more data output from host.
+ *
+ */
+void udc_unset_nak (int epid)
+{
+ if (epid > MAX_ENDPOINTS) {
+ return;
+ }
+
+ if (usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK)) {
+ usbp->usep[epid] &= ~(USEP_THS_NAK | USEP_RHS_NAK);
+ __asm__ ("eieio");
+ }
+}
+
+/******************************************************************************
+ Static Linkage
+******************************************************************************/
+
+/* udc_state_transition_up
+ * udc_state_transition_down
+ *
+ * Helper functions to implement device state changes. The device states and
+ * the events that transition between them are:
+ *
+ * STATE_ATTACHED
+ * || /\
+ * \/ ||
+ * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET
+ * || /\
+ * \/ ||
+ * STATE_POWERED
+ * || /\
+ * \/ ||
+ * DEVICE_RESET DEVICE_POWER_INTERRUPTION
+ * || /\
+ * \/ ||
+ * STATE_DEFAULT
+ * || /\
+ * \/ ||
+ * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET
+ * || /\
+ * \/ ||
+ * STATE_ADDRESSED
+ * || /\
+ * \/ ||
+ * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED
+ * || /\
+ * \/ ||
+ * STATE_CONFIGURED
+ *
+ * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED
+ * to STATE_CONFIGURED) from the specified initial state to the specified final
+ * state, passing through each intermediate state on the way. If the initial
+ * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then
+ * no state transitions will take place.
+ *
+ * udc_state_transition_down transitions down (in the direction from
+ * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the
+ * specified final state, passing through each intermediate state on the way.
+ * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final
+ * state, then no state transitions will take place.
+ *
+ */
+
+static void mpc8xx_udc_state_transition_up (usb_device_state_t initial,
+ usb_device_state_t final)
+{
+ if (initial < final) {
+ switch (initial) {
+ case STATE_ATTACHED:
+ usbd_device_event_irq (udc_device,
+ DEVICE_HUB_CONFIGURED, 0);
+ if (final == STATE_POWERED)
+ break;
+ case STATE_POWERED:
+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
+ if (final == STATE_DEFAULT)
+ break;
+ case STATE_DEFAULT:
+ usbd_device_event_irq (udc_device,
+ DEVICE_ADDRESS_ASSIGNED, 0);
+ if (final == STATE_ADDRESSED)
+ break;
+ case STATE_ADDRESSED:
+ usbd_device_event_irq (udc_device, DEVICE_CONFIGURED,
+ 0);
+ case STATE_CONFIGURED:
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+static void mpc8xx_udc_state_transition_down (usb_device_state_t initial,
+ usb_device_state_t final)
+{
+ if (initial > final) {
+ switch (initial) {
+ case STATE_CONFIGURED:
+ usbd_device_event_irq (udc_device,
+ DEVICE_DE_CONFIGURED, 0);
+ if (final == STATE_ADDRESSED)
+ break;
+ case STATE_ADDRESSED:
+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
+ if (final == STATE_DEFAULT)
+ break;
+ case STATE_DEFAULT:
+ usbd_device_event_irq (udc_device,
+ DEVICE_POWER_INTERRUPTION, 0);
+ if (final == STATE_POWERED)
+ break;
+ case STATE_POWERED:
+ usbd_device_event_irq (udc_device, DEVICE_HUB_RESET,
+ 0);
+ case STATE_ATTACHED:
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+/* mpc8xx_udc_stall
+ *
+ * Force returning of STALL tokens on the given endpoint. Protocol or function
+ * STALL conditions are permissable here
+ */
+static void mpc8xx_udc_stall (unsigned int ep)
+{
+ usbp->usep[ep] |= STALL_BITMASK;
+}
+
+/* mpc8xx_udc_set_nak
+ *
+ * Force returning of NAK responses for the given endpoint as a kind of very
+ * simple flow control
+ */
+static void mpc8xx_udc_set_nak (unsigned int ep)
+{
+ usbp->usep[ep] |= NAK_BITMASK;
+ __asm__ ("eieio");
+}
+
+/* mpc8xx_udc_handle_txerr
+ *
+ * Handle errors relevant to TX. Return a status code to allow calling
+ * indicative of what if anything happened
+ */
+static short mpc8xx_udc_handle_txerr ()
+{
+ short ep = 0, ret = 0;
+
+ for (; ep < TX_RING_SIZE; ep++) {
+ if (usbp->usber & (0x10 << ep)) {
+
+ /* Timeout or underrun */
+ if (tx_cbd[ep]->cbd_sc & 0x06) {
+ ret = 1;
+ mpc8xx_udc_flush_tx_fifo (ep);
+
+ } else {
+ if (usbp->usep[ep] & STALL_BITMASK) {
+ if (!ep) {
+ usbp->usep[ep] &= ~STALL_BITMASK;
+ }
+ } /* else NAK */
+ }
+ usbp->usber |= (0x10 << ep);
+ }
+ }
+ return ret;
+}
+
+/* mpc8xx_udc_advance_rx
+ *
+ * Advance cbd rx
+ */
+static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid)
+{
+ if ((*rx_cbdp)->cbd_sc & RX_BD_W) {
+ *rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CFG_IMMR);
+
+ } else {
+ (*rx_cbdp)++;
+ }
+}
+
+
+/* mpc8xx_udc_flush_tx_fifo
+ *
+ * Flush a given TX fifo. Assumes one tx cbd per endpoint
+ */
+static void mpc8xx_udc_flush_tx_fifo (int epid)
+{
+ volatile cbd_t *tx_cbdp = 0;
+
+ if (epid > MAX_ENDPOINTS) {
+ return;
+ }
+
+ /* TX stop */
+ immr->im_cpm.cp_cpcr = ((epid << 2) | 0x1D01);
+ __asm__ ("eieio");
+ while (immr->im_cpm.cp_cpcr & 0x01);
+
+ usbp->uscom = 0x40 | 0;
+
+ /* reset ring */
+ tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CFG_IMMR);
+ tx_cbdp->cbd_sc = (TX_BD_I | TX_BD_W);
+
+
+ endpoints[epid]->tptr = endpoints[epid]->tbase;
+ endpoints[epid]->tstate = 0x00;
+ endpoints[epid]->tbcnt = 0x00;
+
+ /* TX start */
+ immr->im_cpm.cp_cpcr = ((epid << 2) | 0x2D01);
+ __asm__ ("eieio");
+ while (immr->im_cpm.cp_cpcr & 0x01);
+
+ return;
+}
+
+/* mpc8xx_udc_flush_rx_fifo
+ *
+ * For the sake of completeness of the namespace, it seems like
+ * a good-design-decision (tm) to include mpc8xx_udc_flush_rx_fifo();
+ * If RX_BD_E is true => a driver bug either here or in an upper layer
+ * not polling frequently enough. If RX_BD_E is true we have told the host
+ * we have accepted data but, the CPM found it had no-where to put that data
+ * which needless to say would be a bad thing.
+ */
+static void mpc8xx_udc_flush_rx_fifo ()
+{
+ int i = 0;
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) {
+ ERR ("buf %p used rx data len = 0x%x sc=0x%x!\n",
+ rx_cbd[i], rx_cbd[i]->cbd_datlen,
+ rx_cbd[i]->cbd_sc);
+
+ }
+ }
+ ERR ("BUG : Input over-run\n");
+}
+
+/* mpc8xx_udc_clear_rxbd
+ *
+ * Release control of RX CBD to CP.
+ */
+static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp)
+{
+ rx_cbdp->cbd_datlen = 0x0000;
+ rx_cbdp->cbd_sc = ((rx_cbdp->cbd_sc & RX_BD_W) | (RX_BD_E | RX_BD_I));
+ __asm__ ("eieio");
+}
+
+/* mpc8xx_udc_tx_irq
+ *
+ * Parse for tx timeout, control RX or USB reset/busy conditions
+ * Return -1 on timeout, -2 on fatal error, else return zero
+ */
+static int mpc8xx_udc_tx_irq (int ep)
+{
+ int i = 0;
+
+ if (usbp->usber & (USB_TX_ERRMASK)) {
+ if (mpc8xx_udc_handle_txerr ()) {
+ /* Timeout, controlling function must retry send */
+ return -1;
+ }
+ }
+
+ if (usbp->usber & (USB_E_RESET | USB_E_BSY)) {
+ /* Fatal, abandon TX transaction */
+ return -2;
+ }
+
+ if (usbp->usber & USB_E_RXB) {
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) {
+ if ((rx_cbd[i] == ep_ref[0].prx) || ep) {
+ return -2;
+ }
+ }
+ }
+ }
+
+ return 0;
+}
+
+/* mpc8xx_udc_ep_tx
+ *
+ * Transmit in a re-entrant fashion outbound USB packets.
+ * Implement retry/timeout mechanism described in USB specification
+ * Toggle DATA0/DATA1 pids as necessary
+ * Introduces non-standard tx_retry. The USB standard has no scope for slave
+ * devices to give up TX, however tx_retry stops us getting stuck in an endless
+ * TX loop.
+ */
+static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi)
+{
+ struct urb *urb = epi->tx_urb;
+ volatile cbd_t *tx_cbdp = 0;
+ unsigned int ep = 0, pkt_len = 0, x = 0, tx_retry = 0;
+ int ret = 0;
+
+ if (!epi || (epi->endpoint_address & 0x03) >= MAX_ENDPOINTS || !urb) {
+ return -1;
+ }
+
+ ep = epi->endpoint_address & 0x03;
+ tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
+
+ if (tx_cbdp->cbd_sc & TX_BD_R || usbp->usber & USB_E_TXB) {
+ mpc8xx_udc_flush_tx_fifo (ep);
+ usbp->usber |= USB_E_TXB;
+ };
+
+ while (tx_retry++ < 100) {
+ ret = mpc8xx_udc_tx_irq (ep);
+ if (ret == -1) {
+ /* ignore timeout here */
+ } else if (ret == -2) {
+ /* Abandon TX */
+ mpc8xx_udc_flush_tx_fifo (ep);
+ return -1;
+ }
+
+ tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
+ while (tx_cbdp->cbd_sc & TX_BD_R) {
+ };
+ tx_cbdp->cbd_sc = (tx_cbdp->cbd_sc & TX_BD_W);
+
+ pkt_len = urb->actual_length - epi->sent;
+
+ if (pkt_len > epi->tx_packetSize || pkt_len > EP_MAX_PKT) {
+ pkt_len = MIN (epi->tx_packetSize, EP_MAX_PKT);
+ }
+
+ for (x = 0; x < pkt_len; x++) {
+ *((unsigned char *) (tx_cbdp->cbd_bufaddr + x)) =
+ urb->buffer[epi->sent + x];
+ }
+ tx_cbdp->cbd_datlen = pkt_len;
+ tx_cbdp->cbd_sc |= (CBD_TX_BITMASK | ep_ref[ep].pid);
+ __asm__ ("eieio");
+
+#ifdef __SIMULATE_ERROR__
+ if (++err_poison_test == 2) {
+ err_poison_test = 0;
+ tx_cbdp->cbd_sc &= ~TX_BD_TC;
+ }
+#endif
+
+ usbp->uscom = (USCOM_STR | ep);
+
+ while (!(usbp->usber & USB_E_TXB)) {
+ ret = mpc8xx_udc_tx_irq (ep);
+ if (ret == -1) {
+ /* TX timeout */
+ break;
+ } else if (ret == -2) {
+ if (usbp->usber & USB_E_TXB) {
+ usbp->usber |= USB_E_TXB;
+ }
+ mpc8xx_udc_flush_tx_fifo (ep);
+ return -1;
+ }
+ };
+
+ if (usbp->usber & USB_E_TXB) {
+ usbp->usber |= USB_E_TXB;
+ }
+
+ /* ACK must be present <= 18bit times from TX */
+ if (ret == -1) {
+ continue;
+ }
+
+ /* TX ACK : USB 2.0 8.7.2, Toggle PID, Advance TX */
+ epi->sent += pkt_len;
+ epi->last = MIN (urb->actual_length - epi->sent, epi->tx_packetSize);
+ TOGGLE_TX_PID (ep_ref[ep].pid);
+
+ if (epi->sent >= epi->tx_urb->actual_length) {
+
+ epi->tx_urb->actual_length = 0;
+ epi->sent = 0;
+
+ if (ep_ref[ep].sc & EP_SEND_ZLP) {
+ ep_ref[ep].sc &= ~EP_SEND_ZLP;
+ } else {
+ return 0;
+ }
+ }
+ }
+
+ ERR ("TX fail, endpoint 0x%x tx bytes 0x%x/0x%x\n", ep, epi->sent,
+ epi->tx_urb->actual_length);
+
+ return -1;
+}
+
+/* mpc8xx_udc_dump_request
+ *
+ * Dump a control request to console
+ */
+static void mpc8xx_udc_dump_request (struct usb_device_request *request)
+{
+ DBG ("bmRequestType:%02x bRequest:%02x wValue:%04x "
+ "wIndex:%04x wLength:%04x ?\n",
+ request->bmRequestType,
+ request->bRequest,
+ request->wValue, request->wIndex, request->wLength);
+
+ return;
+}
+
+/* mpc8xx_udc_ep0_rx_setup
+ *
+ * Decode received ep0 SETUP packet. return non-zero on error
+ */
+static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp)
+{
+ unsigned int x = 0;
+ struct urb *purb = ep_ref[0].urb;
+ struct usb_endpoint_instance *epi =
+ &udc_device->bus->endpoint_array[0];
+
+ for (; x < rx_cbdp->cbd_datlen; x++) {
+ *(((unsigned char *) &ep_ref[0].urb->device_request) + x) =
+ *((unsigned char *) (rx_cbdp->cbd_bufaddr + x));
+ }
+
+ mpc8xx_udc_clear_rxbd (rx_cbdp);
+
+ if (ep0_recv_setup (purb)) {
+ mpc8xx_udc_dump_request (&purb->device_request);
+ return -1;
+ }
+
+ if ((purb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK)
+ == USB_REQ_HOST2DEVICE) {
+
+ switch (purb->device_request.bRequest) {
+ case USB_REQ_SET_ADDRESS:
+ /* Send the Status OUT ZLP */
+ ep_ref[0].pid = TX_BD_PID_DATA1;
+ purb->actual_length = 0;
+ mpc8xx_udc_init_tx (epi, purb);
+ mpc8xx_udc_ep_tx (epi);
+
+ /* Move to the addressed state */
+ usbp->usaddr = udc_device->address;
+ mpc8xx_udc_state_transition_up (udc_device->device_state,
+ STATE_ADDRESSED);
+ return 0;
+
+ case USB_REQ_SET_CONFIGURATION:
+ if (!purb->device_request.wValue) {
+ /* Respond at default address */
+ usbp->usaddr = 0x00;
+ mpc8xx_udc_state_transition_down (udc_device->device_state,
+ STATE_ADDRESSED);
+ } else {
+ /* TODO: Support multiple configurations */
+ mpc8xx_udc_state_transition_up (udc_device->device_state,
+ STATE_CONFIGURED);
+ for (x = 1; x < MAX_ENDPOINTS; x++) {
+ if ((udc_device->bus->endpoint_array[x].endpoint_address & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_IN) {
+ ep_ref[x].pid = TX_BD_PID_DATA0;
+ } else {
+ ep_ref[x].pid = RX_BD_PID_DATA0;
+ }
+ /* Set configuration must unstall endpoints */
+ usbp->usep[x] &= ~STALL_BITMASK;
+ }
+ }
+ break;
+ default:
+ /* CDC/Vendor specific */
+ break;
+ }
+
+ /* Send ZLP as ACK in Status OUT phase */
+ ep_ref[0].pid = TX_BD_PID_DATA1;
+ purb->actual_length = 0;
+ mpc8xx_udc_init_tx (epi, purb);
+ mpc8xx_udc_ep_tx (epi);
+
+ } else {
+
+ if (purb->actual_length) {
+ ep_ref[0].pid = TX_BD_PID_DATA1;
+ mpc8xx_udc_init_tx (epi, purb);
+
+ if (!(purb->actual_length % EP0_MAX_PACKET_SIZE)) {
+ ep_ref[0].sc |= EP_SEND_ZLP;
+ }
+
+ if (purb->device_request.wValue ==
+ USB_DESCRIPTOR_TYPE_DEVICE) {
+ if (le16_to_cpu (purb->device_request.wLength)
+ > purb->actual_length) {
+ /* Send EP0_MAX_PACKET_SIZE bytes
+ * unless correct size requested.
+ */
+ if (purb->actual_length > epi->tx_packetSize) {
+ purb->actual_length = epi->tx_packetSize;
+ }
+ }
+ }
+ mpc8xx_udc_ep_tx (epi);
+
+ } else {
+ /* Corrupt SETUP packet? */
+ ERR ("Zero length data or SETUP with DATA-IN phase ?\n");
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/* mpc8xx_udc_init_tx
+ *
+ * Setup some basic parameters for a TX transaction
+ */
+static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi,
+ struct urb *tx_urb)
+{
+ epi->sent = 0;
+ epi->last = 0;
+ epi->tx_urb = tx_urb;
+}
+
+/* mpc8xx_udc_ep0_rx
+ *
+ * Receive ep0/control USB data. Parse and possibly send a response.
+ */
+static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp)
+{
+ if (rx_cbdp->cbd_sc & RX_BD_PID_SETUP) {
+
+ /* Unconditionally accept SETUP packets */
+ if (mpc8xx_udc_ep0_rx_setup (rx_cbdp)) {
+ mpc8xx_udc_stall (0);
+ }
+
+ } else {
+
+ mpc8xx_udc_clear_rxbd (rx_cbdp);
+
+ if ((rx_cbdp->cbd_datlen - 2)) {
+ /* SETUP with a DATA phase
+ * outside of SETUP packet.
+ * Reply with STALL.
+ */
+ mpc8xx_udc_stall (0);
+ }
+ }
+}
+
+/* mpc8xx_udc_epn_rx
+ *
+ * Receive some data from cbd into USB system urb data abstraction
+ * Upper layers should NAK if there is insufficient RX data space
+ */
+static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp)
+{
+ struct usb_endpoint_instance *epi = 0;
+ struct urb *urb = 0;
+ unsigned int x = 0;
+
+ if (epid >= MAX_ENDPOINTS || !rx_cbdp->cbd_datlen) {
+ return 0;
+ }
+
+ /* USB 2.0 PDF section 8.6.4
+ * Discard data with invalid PID it is a resend.
+ */
+ if (ep_ref[epid].pid != (rx_cbdp->cbd_sc & 0xC0)) {
+ return 1;
+ }
+ TOGGLE_RX_PID (ep_ref[epid].pid);
+
+ epi = &udc_device->bus->endpoint_array[epid];
+ urb = epi->rcv_urb;
+
+ for (; x < (rx_cbdp->cbd_datlen - 2); x++) {
+ *((unsigned char *) (urb->buffer + urb->actual_length + x)) =
+ *((unsigned char *) (rx_cbdp->cbd_bufaddr + x));
+ }
+
+ if (x) {
+ usbd_rcv_complete (epi, x, 0);
+ if (ep_ref[epid].urb->status == RECV_ERROR) {
+ DBG ("RX error unset NAK\n");
+ udc_unset_nak (epid);
+ }
+ }
+ return x;
+}
+
+/* mpc8xx_udc_clock_init
+ *
+ * Obtain a clock reference for Full Speed Signaling
+ */
+static void mpc8xx_udc_clock_init (volatile immap_t * immr,
+ volatile cpm8xx_t * cp)
+{
+
+#if defined(CFG_USB_EXTC_CLK)
+
+ /* This has been tested with a 48MHz crystal on CLK6 */
+ switch (CFG_USB_EXTC_CLK) {
+ case 1:
+ immr->im_ioport.iop_papar |= 0x0100;
+ immr->im_ioport.iop_padir &= ~0x0100;
+ cp->cp_sicr |= 0x24;
+ break;
+ case 2:
+ immr->im_ioport.iop_papar |= 0x0200;
+ immr->im_ioport.iop_padir &= ~0x0200;
+ cp->cp_sicr |= 0x2D;
+ break;
+ case 3:
+ immr->im_ioport.iop_papar |= 0x0400;
+ immr->im_ioport.iop_padir &= ~0x0400;
+ cp->cp_sicr |= 0x36;
+ break;
+ case 4:
+ immr->im_ioport.iop_papar |= 0x0800;
+ immr->im_ioport.iop_padir &= ~0x0800;
+ cp->cp_sicr |= 0x3F;
+ break;
+ default:
+ udc_state = STATE_ERROR;
+ break;
+ }
+
+#elif defined(CFG_USB_BRGCLK)
+
+ /* This has been tested with brgclk == 50MHz */
+ int divisor = 0;
+
+ if (gd->cpu_clk < 48000000L) {
+ ERR ("brgclk is too slow for full-speed USB!\n");
+ udc_state = STATE_ERROR;
+ return;
+ }
+
+ /* Assume the brgclk is 'good enough', we want !(gd->cpu_clk%48Mhz)
+ * but, can /probably/ live with close-ish alternative rates.
+ */
+ divisor = (gd->cpu_clk / 48000000L) - 1;
+ cp->cp_sicr &= ~0x0000003F;
+
+ switch (CFG_USB_BRGCLK) {
+ case 1:
+ cp->cp_brgc1 |= (divisor | CPM_BRG_EN);
+ cp->cp_sicr &= ~0x2F;
+ break;
+ case 2:
+ cp->cp_brgc2 |= (divisor | CPM_BRG_EN);
+ cp->cp_sicr |= 0x00000009;
+ break;
+ case 3:
+ cp->cp_brgc3 |= (divisor | CPM_BRG_EN);
+ cp->cp_sicr |= 0x00000012;
+ break;
+ case 4:
+ cp->cp_brgc4 = (divisor | CPM_BRG_EN);
+ cp->cp_sicr |= 0x0000001B;
+ break;
+ default:
+ udc_state = STATE_ERROR;
+ break;
+ }
+
+#else
+#error "CFG_USB_EXTC_CLK or CFG_USB_BRGCLK must be defined"
+#endif
+
+}
+
+/* mpc8xx_udc_cbd_attach
+ *
+ * attach a cbd to and endpoint
+ */
+static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size)
+{
+
+ if (!tx_cbd[ep] || !rx_cbd[ep] || ep >= MAX_ENDPOINTS) {
+ udc_state = STATE_ERROR;
+ return;
+ }
+
+ if (tx_size > USB_MAX_PKT || rx_size > USB_MAX_PKT ||
+ (!tx_size && !rx_size)) {
+ udc_state = STATE_ERROR;
+ return;
+ }
+
+ /* Attach CBD to appropiate Parameter RAM Endpoint data structure */
+ if (rx_size) {
+ endpoints[ep]->rbase = (u32) rx_cbd[rx_ct];
+ endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct];
+ rx_ct++;
+
+ if (!ep) {
+
+ endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct];
+ rx_cbd[rx_ct]->cbd_sc |= RX_BD_W;
+ rx_ct++;
+
+ } else {
+ rx_ct += 2;
+ endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct];
+ rx_cbd[rx_ct]->cbd_sc |= RX_BD_W;
+ rx_ct++;
+ }
+
+ /* Where we expect to RX data on this endpoint */
+ ep_ref[ep].prx = rx_cbd[rx_ct - 1];
+ } else {
+
+ ep_ref[ep].prx = 0;
+ endpoints[ep]->rbase = 0;
+ endpoints[ep]->rbptr = 0;
+ }
+
+ if (tx_size) {
+ endpoints[ep]->tbase = (u32) tx_cbd[tx_ct];
+ endpoints[ep]->tbptr = (u32) tx_cbd[tx_ct];
+ tx_ct++;
+ } else {
+ endpoints[ep]->tbase = 0;
+ endpoints[ep]->tbptr = 0;
+ }
+
+ endpoints[ep]->tstate = 0;
+ endpoints[ep]->tbcnt = 0;
+ endpoints[ep]->mrblr = EP_MAX_PKT;
+ endpoints[ep]->rfcr = 0x18;
+ endpoints[ep]->tfcr = 0x18;
+ ep_ref[ep].sc |= EP_ATTACHED;
+
+ DBG ("ep %d rbase 0x%08x rbptr 0x%08x tbase 0x%08x tbptr 0x%08x prx = %p\n",
+ ep, endpoints[ep]->rbase, endpoints[ep]->rbptr,
+ endpoints[ep]->tbase, endpoints[ep]->tbptr,
+ ep_ref[ep].prx);
+
+ return;
+}
+
+/* mpc8xx_udc_cbd_init
+ *
+ * Allocate space for a cbd and allocate TX/RX data space
+ */
+static void mpc8xx_udc_cbd_init (void)
+{
+ int i = 0;
+
+ for (; i < TX_RING_SIZE; i++) {
+ tx_cbd[i] = (cbd_t *)
+ mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int));
+ }
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ rx_cbd[i] = (cbd_t *)
+ mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int));
+ }
+
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ tx_cbd[i]->cbd_bufaddr =
+ mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int));
+
+ tx_cbd[i]->cbd_sc = (TX_BD_I | TX_BD_W);
+ tx_cbd[i]->cbd_datlen = 0x0000;
+ }
+
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ rx_cbd[i]->cbd_bufaddr =
+ mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int));
+ rx_cbd[i]->cbd_sc = (RX_BD_I | RX_BD_E);
+ rx_cbd[i]->cbd_datlen = 0x0000;
+
+ }
+
+ return;
+}
+
+/* mpc8xx_udc_endpoint_init
+ *
+ * Attach an endpoint to some dpram
+ */
+static void mpc8xx_udc_endpoint_init (void)
+{
+ int i = 0;
+
+ for (; i < MAX_ENDPOINTS; i++) {
+ endpoints[i] = (usb_epb_t *)
+ mpc8xx_udc_alloc (sizeof (usb_epb_t), 32);
+ }
+}
+
+/* mpc8xx_udc_alloc
+ *
+ * Grab the address of some dpram
+ */
+static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment)
+{
+ u32 retaddr = address_base;
+
+ while (retaddr % alignment) {
+ retaddr++;
+ }
+ address_base += data_size;
+
+ return retaddr;
+}
+
+#endif /* CONFIG_MPC885_FAMILY && CONFIG_USB_DEVICE) */
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Gerry Hamel, geh@ti.com, Texas Instruments
+ *
+ * Based on
+ * linux/drivers/usb/device/bi/omap.c
+ * TI OMAP1510 USB bus interface driver
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ * (C) Copyright 2002
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_OMAP1510) && defined(CONFIG_USB_DEVICE)
+
+#include <asm/io.h>
+#ifdef CONFIG_OMAP_SX1
+#include <i2c.h>
+#endif
+
+#include "usbdcore.h"
+#include "usbdcore_omap1510.h"
+#include "usbdcore_ep0.h"
+
+
+#define UDC_INIT_MDELAY 80 /* Device settle delay */
+#define UDC_MAX_ENDPOINTS 31 /* Number of endpoints on this UDC */
+
+/* Some kind of debugging output... */
+#if 1
+#define UDCDBG(str)
+#define UDCDBGA(fmt,args...)
+#else /* The bugs still exists... */
+#define UDCDBG(str) serial_printf("[%s] %s:%d: " str "\n", __FILE__,__FUNCTION__,__LINE__)
+#define UDCDBGA(fmt,args...) serial_printf("[%s] %s:%d: " fmt "\n", __FILE__,__FUNCTION__,__LINE__, ##args)
+#endif
+
+#if 1
+#define UDCREG(name)
+#define UDCREGL(name)
+#else /* The bugs still exists... */
+#define UDCREG(name) serial_printf("%s():%d: %s[%08x]=%.4x\n",__FUNCTION__,__LINE__, (#name), name, inw(name)) /* For 16-bit regs */
+#define UDCREGL(name) serial_printf("%s():%d: %s[%08x]=%.8x\n",__FUNCTION__,__LINE__, (#name), name, inl(name)) /* For 32-bit regs */
+#endif
+
+
+static struct urb *ep0_urb = NULL;
+
+static struct usb_device_instance *udc_device; /* Used in interrupt handler */
+static u16 udc_devstat = 0; /* UDC status (DEVSTAT) */
+static u32 udc_interrupts = 0;
+
+static void udc_stall_ep (unsigned int ep_addr);
+
+
+static struct usb_endpoint_instance *omap1510_find_ep (int ep)
+{
+ int i;
+
+ for (i = 0; i < udc_device->bus->max_endpoints; i++) {
+ if (udc_device->bus->endpoint_array[i].endpoint_address == ep)
+ return &udc_device->bus->endpoint_array[i];
+ }
+ return NULL;
+}
+
+/* ************************************************************************** */
+/* IO
+ */
+
+/*
+ * omap1510_prepare_endpoint_for_rx
+ *
+ * This function implements TRM Figure 14-11.
+ *
+ * The endpoint to prepare for transfer is specified as a physical endpoint
+ * number. For OUT (rx) endpoints 1 through 15, the corresponding endpoint
+ * configuration register is checked to see if the endpoint is ISO or not.
+ * If the OUT endpoint is valid and is non-ISO then its FIFO is enabled.
+ * No action is taken for endpoint 0 or for IN (tx) endpoints 16 through 30.
+ */
+static void omap1510_prepare_endpoint_for_rx (int ep_addr)
+{
+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
+
+ UDCDBGA ("omap1510_prepare_endpoint %x", ep_addr);
+ if (((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)) {
+ if ((inw (UDC_EP_RX (ep_num)) &
+ (UDC_EPn_RX_Valid | UDC_EPn_RX_Iso)) ==
+ UDC_EPn_RX_Valid) {
+ /* rx endpoint is valid, non-ISO, so enable its FIFO */
+ outw (UDC_EP_Sel | ep_num, UDC_EP_NUM);
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ outw (0, UDC_EP_NUM);
+ }
+ }
+}
+
+/* omap1510_configure_endpoints
+ *
+ * This function implements TRM Figure 14-10.
+ */
+static void omap1510_configure_endpoints (struct usb_device_instance *device)
+{
+ int ep;
+ struct usb_bus_instance *bus;
+ struct usb_endpoint_instance *endpoint;
+ unsigned short ep_ptr;
+ unsigned short ep_size;
+ unsigned short ep_isoc;
+ unsigned short ep_doublebuffer;
+ int ep_addr;
+ int packet_size;
+ int buffer_size;
+ int attributes;
+
+ bus = device->bus;
+
+ /* There is a dedicated 2048 byte buffer for USB packets that may be
+ * arbitrarily partitioned among the endpoints on 8-byte boundaries.
+ * The first 8 bytes are reserved for receiving setup packets on
+ * endpoint 0.
+ */
+ ep_ptr = 8; /* reserve the first 8 bytes for the setup fifo */
+
+ for (ep = 0; ep < bus->max_endpoints; ep++) {
+ endpoint = bus->endpoint_array + ep;
+ ep_addr = endpoint->endpoint_address;
+ if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+ /* IN endpoint */
+ packet_size = endpoint->tx_packetSize;
+ attributes = endpoint->tx_attributes;
+ } else {
+ /* OUT endpoint */
+ packet_size = endpoint->rcv_packetSize;
+ attributes = endpoint->rcv_attributes;
+ }
+
+ switch (packet_size) {
+ case 0:
+ ep_size = 0;
+ break;
+ case 8:
+ ep_size = 0;
+ break;
+ case 16:
+ ep_size = 1;
+ break;
+ case 32:
+ ep_size = 2;
+ break;
+ case 64:
+ ep_size = 3;
+ break;
+ case 128:
+ ep_size = 4;
+ break;
+ case 256:
+ ep_size = 5;
+ break;
+ case 512:
+ ep_size = 6;
+ break;
+ default:
+ UDCDBGA ("ep 0x%02x has bad packet size %d",
+ ep_addr, packet_size);
+ packet_size = 0;
+ ep_size = 0;
+ break;
+ }
+
+ switch (attributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ case USB_ENDPOINT_XFER_BULK:
+ case USB_ENDPOINT_XFER_INT:
+ default:
+ /* A non-isochronous endpoint may optionally be
+ * double-buffered. For now we disable
+ * double-buffering.
+ */
+ ep_doublebuffer = 0;
+ ep_isoc = 0;
+ if (packet_size > 64)
+ packet_size = 0;
+ if (!ep || !ep_doublebuffer)
+ buffer_size = packet_size;
+ else
+ buffer_size = packet_size * 2;
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ /* Isochronous endpoints are always double-
+ * buffered, but the double-buffering bit
+ * in the endpoint configuration register
+ * becomes the msb of the endpoint size so we
+ * set the double-buffering flag to zero.
+ */
+ ep_doublebuffer = 0;
+ ep_isoc = 1;
+ buffer_size = packet_size * 2;
+ break;
+ }
+
+ /* check to see if our packet buffer RAM is exhausted */
+ if ((ep_ptr + buffer_size) > 2048) {
+ UDCDBGA ("out of packet RAM for ep 0x%02x buf size %d", ep_addr, buffer_size);
+ buffer_size = packet_size = 0;
+ }
+
+ /* force a default configuration for endpoint 0 since it is
+ * always enabled
+ */
+ if (!ep && ((packet_size < 8) || (packet_size > 64))) {
+ buffer_size = packet_size = 64;
+ ep_size = 3;
+ }
+
+ if (!ep) {
+ /* configure endpoint 0 */
+ outw ((ep_size << 12) | (ep_ptr >> 3), UDC_EP0);
+ /*UDCDBGA("ep 0 buffer offset 0x%03x packet size 0x%03x", */
+ /* ep_ptr, packet_size); */
+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+ /* IN endpoint */
+ if (packet_size) {
+ outw ((1 << 15) | (ep_doublebuffer << 14) |
+ (ep_size << 12) | (ep_isoc << 11) |
+ (ep_ptr >> 3),
+ UDC_EP_TX (ep_addr &
+ USB_ENDPOINT_NUMBER_MASK));
+ UDCDBGA ("IN ep %d buffer offset 0x%03x"
+ " packet size 0x%03x",
+ ep_addr & USB_ENDPOINT_NUMBER_MASK,
+ ep_ptr, packet_size);
+ } else {
+ outw (0,
+ UDC_EP_TX (ep_addr &
+ USB_ENDPOINT_NUMBER_MASK));
+ }
+ } else {
+ /* OUT endpoint */
+ if (packet_size) {
+ outw ((1 << 15) | (ep_doublebuffer << 14) |
+ (ep_size << 12) | (ep_isoc << 11) |
+ (ep_ptr >> 3),
+ UDC_EP_RX (ep_addr &
+ USB_ENDPOINT_NUMBER_MASK));
+ UDCDBGA ("OUT ep %d buffer offset 0x%03x"
+ " packet size 0x%03x",
+ ep_addr & USB_ENDPOINT_NUMBER_MASK,
+ ep_ptr, packet_size);
+ } else {
+ outw (0,
+ UDC_EP_RX (ep_addr &
+ USB_ENDPOINT_NUMBER_MASK));
+ }
+ }
+ ep_ptr += buffer_size;
+ }
+}
+
+/* omap1510_deconfigure_device
+ *
+ * This function balances omap1510_configure_device.
+ */
+static void omap1510_deconfigure_device (void)
+{
+ int epnum;
+
+ UDCDBG ("clear Cfg_Lock");
+ outw (inw (UDC_SYSCON1) & ~UDC_Cfg_Lock, UDC_SYSCON1);
+ UDCREG (UDC_SYSCON1);
+
+ /* deconfigure all endpoints */
+ for (epnum = 1; epnum <= 15; epnum++) {
+ outw (0, UDC_EP_RX (epnum));
+ outw (0, UDC_EP_TX (epnum));
+ }
+}
+
+/* omap1510_configure_device
+ *
+ * This function implements TRM Figure 14-9.
+ */
+static void omap1510_configure_device (struct usb_device_instance *device)
+{
+ omap1510_configure_endpoints (device);
+
+
+ /* Figure 14-9 indicates we should enable interrupts here, but we have
+ * other routines (udc_all_interrupts, udc_suspended_interrupts) to
+ * do that.
+ */
+
+ UDCDBG ("set Cfg_Lock");
+ outw (inw (UDC_SYSCON1) | UDC_Cfg_Lock, UDC_SYSCON1);
+ UDCREG (UDC_SYSCON1);
+}
+
+/* omap1510_write_noniso_tx_fifo
+ *
+ * This function implements TRM Figure 14-30.
+ *
+ * If the endpoint has an active tx_urb, then the next packet of data from the
+ * URB is written to the tx FIFO. The total amount of data in the urb is given
+ * by urb->actual_length. The maximum amount of data that can be sent in any
+ * one packet is given by endpoint->tx_packetSize. The number of data bytes
+ * from this URB that have already been transmitted is given by endpoint->sent.
+ * endpoint->last is updated by this routine with the number of data bytes
+ * transmitted in this packet.
+ *
+ * In accordance with Figure 14-30, the EP_NUM register must already have been
+ * written with the value to select the appropriate tx FIFO before this routine
+ * is called.
+ */
+static void omap1510_write_noniso_tx_fifo (struct usb_endpoint_instance
+ *endpoint)
+{
+ struct urb *urb = endpoint->tx_urb;
+
+ if (urb) {
+ unsigned int last, i;
+
+ UDCDBGA ("urb->buffer %p, buffer_length %d, actual_length %d",
+ urb->buffer, urb->buffer_length, urb->actual_length);
+ if ((last =
+ MIN (urb->actual_length - endpoint->sent,
+ endpoint->tx_packetSize))) {
+ u8 *cp = urb->buffer + endpoint->sent;
+
+ UDCDBGA ("endpoint->sent %d, tx_packetSize %d, last %d", endpoint->sent, endpoint->tx_packetSize, last);
+
+ if (((u32) cp & 1) == 0) { /* word aligned? */
+ outsw (UDC_DATA, cp, last >> 1);
+ } else { /* byte aligned. */
+ for (i = 0; i < (last >> 1); i++) {
+ u16 w = ((u16) cp[2 * i + 1] << 8) |
+ (u16) cp[2 * i];
+ outw (w, UDC_DATA);
+ }
+ }
+ if (last & 1) {
+ outb (*(cp + last - 1), UDC_DATA);
+ }
+ }
+ endpoint->last = last;
+ }
+}
+
+/* omap1510_read_noniso_rx_fifo
+ *
+ * This function implements TRM Figure 14-28.
+ *
+ * If the endpoint has an active rcv_urb, then the next packet of data is read
+ * from the rcv FIFO and written to rcv_urb->buffer at offset
+ * rcv_urb->actual_length to append the packet data to the data from any
+ * previous packets for this transfer. We assume that there is sufficient room
+ * left in the buffer to hold an entire packet of data.
+ *
+ * The return value is the number of bytes read from the FIFO for this packet.
+ *
+ * In accordance with Figure 14-28, the EP_NUM register must already have been
+ * written with the value to select the appropriate rcv FIFO before this routine
+ * is called.
+ */
+static int omap1510_read_noniso_rx_fifo (struct usb_endpoint_instance
+ *endpoint)
+{
+ struct urb *urb = endpoint->rcv_urb;
+ int len = 0;
+
+ if (urb) {
+ len = inw (UDC_RXFSTAT);
+
+ if (len) {
+ unsigned char *cp = urb->buffer + urb->actual_length;
+
+ insw (UDC_DATA, cp, len >> 1);
+ if (len & 1)
+ *(cp + len - 1) = inb (UDC_DATA);
+ }
+ }
+ return len;
+}
+
+/* omap1510_prepare_for_control_write_status
+ *
+ * This function implements TRM Figure 14-17.
+ *
+ * We have to deal here with non-autodecoded control writes that haven't already
+ * been dealt with by ep0_recv_setup. The non-autodecoded standard control
+ * write requests are: set/clear endpoint feature, set configuration, set
+ * interface, and set descriptor. ep0_recv_setup handles set/clear requests for
+ * ENDPOINT_HALT by halting the endpoint for a set request and resetting the
+ * endpoint for a clear request. ep0_recv_setup returns an error for
+ * SET_DESCRIPTOR requests which causes them to be terminated with a stall by
+ * the setup handler. A SET_INTERFACE request is handled by ep0_recv_setup by
+ * generating a DEVICE_SET_INTERFACE event. This leaves only the
+ * SET_CONFIGURATION event for us to deal with here.
+ *
+ */
+static void omap1510_prepare_for_control_write_status (struct urb *urb)
+{
+ struct usb_device_request *request = &urb->device_request;;
+
+ /* check for a SET_CONFIGURATION request */
+ if (request->bRequest == USB_REQ_SET_CONFIGURATION) {
+ int configuration = le16_to_cpu (request->wValue) & 0xff;
+ unsigned short devstat = inw (UDC_DEVSTAT);
+
+ if ((devstat & (UDC_ADD | UDC_CFG)) == UDC_ADD) {
+ /* device is currently in ADDRESSED state */
+ if (configuration) {
+ /* Assume the specified non-zero configuration
+ * value is valid and switch to the CONFIGURED
+ * state.
+ */
+ outw (UDC_Dev_Cfg, UDC_SYSCON2);
+ }
+ } else if ((devstat & UDC_CFG) == UDC_CFG) {
+ /* device is currently in CONFIGURED state */
+ if (!configuration) {
+ /* Switch to ADDRESSED state. */
+ outw (UDC_Clr_Cfg, UDC_SYSCON2);
+ }
+ }
+ }
+
+ /* select EP0 tx FIFO */
+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
+ /* clear endpoint (no data bytes in status stage) */
+ outw (UDC_Clr_EP, UDC_CTRL);
+ /* enable the EP0 tx FIFO */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ /* deselect the endpoint */
+ outw (UDC_EP_Dir, UDC_EP_NUM);
+}
+
+/* udc_state_transition_up
+ * udc_state_transition_down
+ *
+ * Helper functions to implement device state changes. The device states and
+ * the events that transition between them are:
+ *
+ * STATE_ATTACHED
+ * || /\
+ * \/ ||
+ * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET
+ * || /\
+ * \/ ||
+ * STATE_POWERED
+ * || /\
+ * \/ ||
+ * DEVICE_RESET DEVICE_POWER_INTERRUPTION
+ * || /\
+ * \/ ||
+ * STATE_DEFAULT
+ * || /\
+ * \/ ||
+ * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET
+ * || /\
+ * \/ ||
+ * STATE_ADDRESSED
+ * || /\
+ * \/ ||
+ * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED
+ * || /\
+ * \/ ||
+ * STATE_CONFIGURED
+ *
+ * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED
+ * to STATE_CONFIGURED) from the specified initial state to the specified final
+ * state, passing through each intermediate state on the way. If the initial
+ * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then
+ * no state transitions will take place.
+ *
+ * udc_state_transition_down transitions down (in the direction from
+ * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the
+ * specified final state, passing through each intermediate state on the way.
+ * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final
+ * state, then no state transitions will take place.
+ *
+ * These functions must only be called with interrupts disabled.
+ */
+static void udc_state_transition_up (usb_device_state_t initial,
+ usb_device_state_t final)
+{
+ if (initial < final) {
+ switch (initial) {
+ case STATE_ATTACHED:
+ usbd_device_event_irq (udc_device,
+ DEVICE_HUB_CONFIGURED, 0);
+ if (final == STATE_POWERED)
+ break;
+ case STATE_POWERED:
+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
+ if (final == STATE_DEFAULT)
+ break;
+ case STATE_DEFAULT:
+ usbd_device_event_irq (udc_device,
+ DEVICE_ADDRESS_ASSIGNED, 0);
+ if (final == STATE_ADDRESSED)
+ break;
+ case STATE_ADDRESSED:
+ usbd_device_event_irq (udc_device, DEVICE_CONFIGURED,
+ 0);
+ case STATE_CONFIGURED:
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+static void udc_state_transition_down (usb_device_state_t initial,
+ usb_device_state_t final)
+{
+ if (initial > final) {
+ switch (initial) {
+ case STATE_CONFIGURED:
+ usbd_device_event_irq (udc_device, DEVICE_DE_CONFIGURED, 0);
+ if (final == STATE_ADDRESSED)
+ break;
+ case STATE_ADDRESSED:
+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
+ if (final == STATE_DEFAULT)
+ break;
+ case STATE_DEFAULT:
+ usbd_device_event_irq (udc_device, DEVICE_POWER_INTERRUPTION, 0);
+ if (final == STATE_POWERED)
+ break;
+ case STATE_POWERED:
+ usbd_device_event_irq (udc_device, DEVICE_HUB_RESET, 0);
+ case STATE_ATTACHED:
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+/* Handle all device state changes.
+ * This function implements TRM Figure 14-21.
+ */
+static void omap1510_udc_state_changed (void)
+{
+ u16 bits;
+ u16 devstat = inw (UDC_DEVSTAT);
+
+ UDCDBGA ("state changed, devstat %x, old %x", devstat, udc_devstat);
+
+ bits = devstat ^ udc_devstat;
+ if (bits) {
+ if (bits & UDC_ATT) {
+ if (devstat & UDC_ATT) {
+ UDCDBG ("device attached and powered");
+ udc_state_transition_up (udc_device->device_state, STATE_POWERED);
+ } else {
+ UDCDBG ("device detached or unpowered");
+ udc_state_transition_down (udc_device->device_state, STATE_ATTACHED);
+ }
+ }
+ if (bits & UDC_USB_Reset) {
+ if (devstat & UDC_USB_Reset) {
+ UDCDBG ("device reset in progess");
+ udc_state_transition_down (udc_device->device_state, STATE_POWERED);
+ } else {
+ UDCDBG ("device reset completed");
+ }
+ }
+ if (bits & UDC_DEF) {
+ if (devstat & UDC_DEF) {
+ UDCDBG ("device entering default state");
+ udc_state_transition_up (udc_device->device_state, STATE_DEFAULT);
+ } else {
+ UDCDBG ("device leaving default state");
+ udc_state_transition_down (udc_device->device_state, STATE_POWERED);
+ }
+ }
+ if (bits & UDC_SUS) {
+ if (devstat & UDC_SUS) {
+ UDCDBG ("entering suspended state");
+ usbd_device_event_irq (udc_device, DEVICE_BUS_INACTIVE, 0);
+ } else {
+ UDCDBG ("leaving suspended state");
+ usbd_device_event_irq (udc_device, DEVICE_BUS_ACTIVITY, 0);
+ }
+ }
+ if (bits & UDC_R_WK_OK) {
+ UDCDBGA ("remote wakeup %s", (devstat & UDC_R_WK_OK)
+ ? "enabled" : "disabled");
+ }
+ if (bits & UDC_ADD) {
+ if (devstat & UDC_ADD) {
+ UDCDBG ("default -> addressed");
+ udc_state_transition_up (udc_device->device_state, STATE_ADDRESSED);
+ } else {
+ UDCDBG ("addressed -> default");
+ udc_state_transition_down (udc_device->device_state, STATE_DEFAULT);
+ }
+ }
+ if (bits & UDC_CFG) {
+ if (devstat & UDC_CFG) {
+ UDCDBG ("device configured");
+ /* The ep0_recv_setup function generates the
+ * DEVICE_CONFIGURED event when a
+ * USB_REQ_SET_CONFIGURATION setup packet is
+ * received, so we should already be in the
+ * state STATE_CONFIGURED.
+ */
+ udc_state_transition_up (udc_device->device_state, STATE_CONFIGURED);
+ } else {
+ UDCDBG ("device deconfigured");
+ udc_state_transition_down (udc_device->device_state, STATE_ADDRESSED);
+ }
+ }
+ }
+
+ /* Clear interrupt source */
+ outw (UDC_DS_Chg, UDC_IRQ_SRC);
+
+ /* Save current DEVSTAT */
+ udc_devstat = devstat;
+}
+
+/* Handle SETUP USB interrupt.
+ * This function implements TRM Figure 14-14.
+ */
+static void omap1510_udc_setup (struct usb_endpoint_instance *endpoint)
+{
+ UDCDBG ("-> Entering device setup");
+
+ do {
+ const int setup_pktsize = 8;
+ unsigned char *datap =
+ (unsigned char *) &ep0_urb->device_request;
+
+ /* Gain access to EP 0 setup FIFO */
+ outw (UDC_Setup_Sel, UDC_EP_NUM);
+
+ /* Read control request data */
+ insb (UDC_DATA, datap, setup_pktsize);
+
+ UDCDBGA ("EP0 setup read [%x %x %x %x %x %x %x %x]",
+ *(datap + 0), *(datap + 1), *(datap + 2),
+ *(datap + 3), *(datap + 4), *(datap + 5),
+ *(datap + 6), *(datap + 7));
+
+ /* Reset EP0 setup FIFO */
+ outw (0, UDC_EP_NUM);
+ } while (inw (UDC_IRQ_SRC) & UDC_Setup);
+
+ /* Try to process setup packet */
+ if (ep0_recv_setup (ep0_urb)) {
+ /* Not a setup packet, stall next EP0 transaction */
+ udc_stall_ep (0);
+ UDCDBG ("can't parse setup packet, still waiting for setup");
+ return;
+ }
+
+ /* Check direction */
+ if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK)
+ == USB_REQ_HOST2DEVICE) {
+ UDCDBG ("control write on EP0");
+ if (le16_to_cpu (ep0_urb->device_request.wLength)) {
+ /* We don't support control write data stages.
+ * The only standard control write request with a data
+ * stage is SET_DESCRIPTOR, and ep0_recv_setup doesn't
+ * support that so we just stall those requests. A
+ * function driver might support a non-standard
+ * write request with a data stage, but it isn't
+ * obvious what we would do with the data if we read it
+ * so we'll just stall it. It seems like the API isn't
+ * quite right here.
+ */
+#if 0
+ /* Here is what we would do if we did support control
+ * write data stages.
+ */
+ ep0_urb->actual_length = 0;
+ outw (0, UDC_EP_NUM);
+ /* enable the EP0 rx FIFO */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+#else
+ /* Stall this request */
+ UDCDBG ("Stalling unsupported EP0 control write data "
+ "stage.");
+ udc_stall_ep (0);
+#endif
+ } else {
+ omap1510_prepare_for_control_write_status (ep0_urb);
+ }
+ } else {
+ UDCDBG ("control read on EP0");
+ /* The ep0_recv_setup function has already placed our response
+ * packet data in ep0_urb->buffer and the packet length in
+ * ep0_urb->actual_length.
+ */
+ endpoint->tx_urb = ep0_urb;
+ endpoint->sent = 0;
+ /* select the EP0 tx FIFO */
+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
+ /* Write packet data to the FIFO. omap1510_write_noniso_tx_fifo
+ * will update endpoint->last with the number of bytes written
+ * to the FIFO.
+ */
+ omap1510_write_noniso_tx_fifo (endpoint);
+ /* enable the FIFO to start the packet transmission */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ /* deselect the EP0 tx FIFO */
+ outw (UDC_EP_Dir, UDC_EP_NUM);
+ }
+
+ UDCDBG ("<- Leaving device setup");
+}
+
+/* Handle endpoint 0 RX interrupt
+ * This routine implements TRM Figure 14-16.
+ */
+static void omap1510_udc_ep0_rx (struct usb_endpoint_instance *endpoint)
+{
+ unsigned short status;
+
+ UDCDBG ("RX on EP0");
+ /* select EP0 rx FIFO */
+ outw (UDC_EP_Sel, UDC_EP_NUM);
+
+ status = inw (UDC_STAT_FLG);
+
+ if (status & UDC_ACK) {
+ /* Check direction */
+ if ((ep0_urb->device_request.bmRequestType
+ & USB_REQ_DIRECTION_MASK) == USB_REQ_HOST2DEVICE) {
+ /* This rx interrupt must be for a control write data
+ * stage packet.
+ *
+ * We don't support control write data stages.
+ * We should never end up here.
+ */
+
+ /* clear the EP0 rx FIFO */
+ outw (UDC_Clr_EP, UDC_CTRL);
+
+ /* deselect the EP0 rx FIFO */
+ outw (0, UDC_EP_NUM);
+
+ UDCDBG ("Stalling unexpected EP0 control write "
+ "data stage packet");
+ udc_stall_ep (0);
+ } else {
+ /* This rx interrupt must be for a control read status
+ * stage packet.
+ */
+ UDCDBG ("ACK on EP0 control read status stage packet");
+ /* deselect EP0 rx FIFO */
+ outw (0, UDC_EP_NUM);
+ }
+ } else if (status & UDC_STALL) {
+ UDCDBG ("EP0 stall during RX");
+ /* deselect EP0 rx FIFO */
+ outw (0, UDC_EP_NUM);
+ } else {
+ /* deselect EP0 rx FIFO */
+ outw (0, UDC_EP_NUM);
+ }
+}
+
+/* Handle endpoint 0 TX interrupt
+ * This routine implements TRM Figure 14-18.
+ */
+static void omap1510_udc_ep0_tx (struct usb_endpoint_instance *endpoint)
+{
+ unsigned short status;
+ struct usb_device_request *request = &ep0_urb->device_request;
+
+ UDCDBG ("TX on EP0");
+ /* select EP0 TX FIFO */
+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
+
+ status = inw (UDC_STAT_FLG);
+ if (status & UDC_ACK) {
+ /* Check direction */
+ if ((request->bmRequestType & USB_REQ_DIRECTION_MASK) ==
+ USB_REQ_HOST2DEVICE) {
+ /* This tx interrupt must be for a control write status
+ * stage packet.
+ */
+ UDCDBG ("ACK on EP0 control write status stage packet");
+ /* deselect EP0 TX FIFO */
+ outw (UDC_EP_Dir, UDC_EP_NUM);
+ } else {
+ /* This tx interrupt must be for a control read data
+ * stage packet.
+ */
+ int wLength = le16_to_cpu (request->wLength);
+
+ /* Update our count of bytes sent so far in this
+ * transfer.
+ */
+ endpoint->sent += endpoint->last;
+
+ /* We are finished with this transfer if we have sent
+ * all of the bytes in our tx urb (urb->actual_length)
+ * unless we need a zero-length terminating packet. We
+ * need a zero-length terminating packet if we returned
+ * fewer bytes than were requested (wLength) by the host,
+ * and the number of bytes we returned is an exact
+ * multiple of the packet size endpoint->tx_packetSize.
+ */
+ if ((endpoint->sent == ep0_urb->actual_length)
+ && ((ep0_urb->actual_length == wLength)
+ || (endpoint->last !=
+ endpoint->tx_packetSize))) {
+ /* Done with control read data stage. */
+ UDCDBG ("control read data stage complete");
+ /* deselect EP0 TX FIFO */
+ outw (UDC_EP_Dir, UDC_EP_NUM);
+ /* select EP0 RX FIFO to prepare for control
+ * read status stage.
+ */
+ outw (UDC_EP_Sel, UDC_EP_NUM);
+ /* clear the EP0 RX FIFO */
+ outw (UDC_Clr_EP, UDC_CTRL);
+ /* enable the EP0 RX FIFO */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ /* deselect the EP0 RX FIFO */
+ outw (0, UDC_EP_NUM);
+ } else {
+ /* We still have another packet of data to send
+ * in this control read data stage or else we
+ * need a zero-length terminating packet.
+ */
+ UDCDBG ("ACK control read data stage packet");
+ omap1510_write_noniso_tx_fifo (endpoint);
+ /* enable the EP0 tx FIFO to start transmission */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ /* deselect EP0 TX FIFO */
+ outw (UDC_EP_Dir, UDC_EP_NUM);
+ }
+ }
+ } else if (status & UDC_STALL) {
+ UDCDBG ("EP0 stall during TX");
+ /* deselect EP0 TX FIFO */
+ outw (UDC_EP_Dir, UDC_EP_NUM);
+ } else {
+ /* deselect EP0 TX FIFO */
+ outw (UDC_EP_Dir, UDC_EP_NUM);
+ }
+}
+
+/* Handle RX transaction on non-ISO endpoint.
+ * This function implements TRM Figure 14-27.
+ * The ep argument is a physical endpoint number for a non-ISO OUT endpoint
+ * in the range 1 to 15.
+ */
+static void omap1510_udc_epn_rx (int ep)
+{
+ unsigned short status;
+
+ /* Check endpoint status */
+ status = inw (UDC_STAT_FLG);
+
+ if (status & UDC_ACK) {
+ int nbytes;
+ struct usb_endpoint_instance *endpoint =
+ omap1510_find_ep (ep);
+
+ nbytes = omap1510_read_noniso_rx_fifo (endpoint);
+ usbd_rcv_complete (endpoint, nbytes, 0);
+
+ /* enable rx FIFO to prepare for next packet */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ } else if (status & UDC_STALL) {
+ UDCDBGA ("STALL on RX endpoint %d", ep);
+ } else if (status & UDC_NAK) {
+ UDCDBGA ("NAK on RX ep %d", ep);
+ } else {
+ serial_printf ("omap-bi: RX on ep %d with status %x", ep,
+ status);
+ }
+}
+
+/* Handle TX transaction on non-ISO endpoint.
+ * This function implements TRM Figure 14-29.
+ * The ep argument is a physical endpoint number for a non-ISO IN endpoint
+ * in the range 16 to 30.
+ */
+static void omap1510_udc_epn_tx (int ep)
+{
+ unsigned short status;
+
+ /*serial_printf("omap1510_udc_epn_tx( %x )\n",ep); */
+
+ /* Check endpoint status */
+ status = inw (UDC_STAT_FLG);
+
+ if (status & UDC_ACK) {
+ struct usb_endpoint_instance *endpoint =
+ omap1510_find_ep (ep);
+
+ /* We need to transmit a terminating zero-length packet now if
+ * we have sent all of the data in this URB and the transfer
+ * size was an exact multiple of the packet size.
+ */
+ if (endpoint->tx_urb
+ && (endpoint->last == endpoint->tx_packetSize)
+ && (endpoint->tx_urb->actual_length - endpoint->sent -
+ endpoint->last == 0)) {
+ /* Prepare to transmit a zero-length packet. */
+ endpoint->sent += endpoint->last;
+ /* write 0 bytes of data to FIFO */
+ omap1510_write_noniso_tx_fifo (endpoint);
+ /* enable tx FIFO to start transmission */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ } else if (endpoint->tx_urb
+ && endpoint->tx_urb->actual_length) {
+ /* retire the data that was just sent */
+ usbd_tx_complete (endpoint);
+ /* Check to see if we have more data ready to transmit
+ * now.
+ */
+ if (endpoint->tx_urb
+ && endpoint->tx_urb->actual_length) {
+ /* write data to FIFO */
+ omap1510_write_noniso_tx_fifo (endpoint);
+ /* enable tx FIFO to start transmission */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ }
+ }
+ } else if (status & UDC_STALL) {
+ UDCDBGA ("STALL on TX endpoint %d", ep);
+ } else if (status & UDC_NAK) {
+ UDCDBGA ("NAK on TX endpoint %d", ep);
+ } else {
+ /*serial_printf("omap-bi: TX on ep %d with status %x\n", ep, status); */
+ }
+}
+
+
+/*
+-------------------------------------------------------------------------------
+*/
+
+/* Handle general USB interrupts and dispatch according to type.
+ * This function implements TRM Figure 14-13.
+ */
+void omap1510_udc_irq (void)
+{
+ u16 irq_src = inw (UDC_IRQ_SRC);
+ int valid_irq = 0;
+
+ if (!(irq_src & ~UDC_SOF_Flg)) /* ignore SOF interrupts ) */
+ return;
+
+ UDCDBGA ("< IRQ #%d start >- %x", udc_interrupts, irq_src);
+ /*serial_printf("< IRQ #%d start >- %x\n", udc_interrupts, irq_src); */
+
+ if (irq_src & UDC_DS_Chg) {
+ /* Device status changed */
+ omap1510_udc_state_changed ();
+ valid_irq++;
+ }
+ if (irq_src & UDC_EP0_RX) {
+ /* Endpoint 0 receive */
+ outw (UDC_EP0_RX, UDC_IRQ_SRC); /* ack interrupt */
+ omap1510_udc_ep0_rx (udc_device->bus->endpoint_array + 0);
+ valid_irq++;
+ }
+ if (irq_src & UDC_EP0_TX) {
+ /* Endpoint 0 transmit */
+ outw (UDC_EP0_TX, UDC_IRQ_SRC); /* ack interrupt */
+ omap1510_udc_ep0_tx (udc_device->bus->endpoint_array + 0);
+ valid_irq++;
+ }
+ if (irq_src & UDC_Setup) {
+ /* Device setup */
+ omap1510_udc_setup (udc_device->bus->endpoint_array + 0);
+ valid_irq++;
+ }
+ /*if (!valid_irq) */
+ /* serial_printf("unknown interrupt, IRQ_SRC %.4x\n", irq_src); */
+ UDCDBGA ("< IRQ #%d end >", udc_interrupts);
+ udc_interrupts++;
+}
+
+/* This function implements TRM Figure 14-26. */
+void omap1510_udc_noniso_irq (void)
+{
+ unsigned short epnum;
+ unsigned short irq_src = inw (UDC_IRQ_SRC);
+ int valid_irq = 0;
+
+ if (!(irq_src & (UDC_EPn_RX | UDC_EPn_TX)))
+ return;
+
+ UDCDBGA ("non-ISO IRQ, IRQ_SRC %x", inw (UDC_IRQ_SRC));
+
+ if (irq_src & UDC_EPn_RX) { /* Endpoint N OUT transaction */
+ /* Determine the endpoint number for this interrupt */
+ epnum = (inw (UDC_EPN_STAT) & 0x0f00) >> 8;
+ UDCDBGA ("RX on ep %x", epnum);
+
+ /* acknowledge interrupt */
+ outw (UDC_EPn_RX, UDC_IRQ_SRC);
+
+ if (epnum) {
+ /* select the endpoint FIFO */
+ outw (UDC_EP_Sel | epnum, UDC_EP_NUM);
+
+ omap1510_udc_epn_rx (epnum);
+
+ /* deselect the endpoint FIFO */
+ outw (epnum, UDC_EP_NUM);
+ }
+ valid_irq++;
+ }
+ if (irq_src & UDC_EPn_TX) { /* Endpoint N IN transaction */
+ /* Determine the endpoint number for this interrupt */
+ epnum = (inw (UDC_EPN_STAT) & 0x000f) | USB_DIR_IN;
+ UDCDBGA ("TX on ep %x", epnum);
+
+ /* acknowledge interrupt */
+ outw (UDC_EPn_TX, UDC_IRQ_SRC);
+
+ if (epnum) {
+ /* select the endpoint FIFO */
+ outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM);
+
+ omap1510_udc_epn_tx (epnum);
+
+ /* deselect the endpoint FIFO */
+ outw (UDC_EP_Dir | epnum, UDC_EP_NUM);
+ }
+ valid_irq++;
+ }
+ if (!valid_irq)
+ serial_printf (": unknown non-ISO interrupt, IRQ_SRC %.4x\n",
+ irq_src);
+}
+
+/*
+-------------------------------------------------------------------------------
+*/
+
+
+/*
+ * Start of public functions.
+ */
+
+/* Called to start packet transmission. */
+void udc_endpoint_write (struct usb_endpoint_instance *endpoint)
+{
+ unsigned short epnum =
+ endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK;
+
+ UDCDBGA ("Starting transmit on ep %x", epnum);
+
+ if (endpoint->tx_urb) {
+ /* select the endpoint FIFO */
+ outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM);
+ /* write data to FIFO */
+ omap1510_write_noniso_tx_fifo (endpoint);
+ /* enable tx FIFO to start transmission */
+ outw (UDC_Set_FIFO_En, UDC_CTRL);
+ /* deselect the endpoint FIFO */
+ outw (UDC_EP_Dir | epnum, UDC_EP_NUM);
+ }
+}
+
+/* Start to initialize h/w stuff */
+int udc_init (void)
+{
+ u16 udc_rev;
+ uchar value;
+ ulong gpio;
+ int i;
+
+ /* Let the device settle down before we start */
+ for (i = 0; i < UDC_INIT_MDELAY; i++) udelay(1000);
+
+ udc_device = NULL;
+
+ UDCDBG ("starting");
+
+ /* Check peripheral reset. Must be 1 to make sure
+ MPU TIPB peripheral reset is inactive */
+ UDCREG (ARM_RSTCT2);
+
+ /* Set and check clock control.
+ * We might ought to be using the clock control API to do
+ * this instead of fiddling with the clock registers directly
+ * here.
+ */
+ outw ((1 << 4) | (1 << 5), CLOCK_CTRL);
+ UDCREG (CLOCK_CTRL);
+ /* Set and check APLL */
+ outw (0x0008, APLL_CTRL);
+ UDCREG (APLL_CTRL);
+ /* Set and check DPLL */
+ outw (0x2210, DPLL_CTRL);
+ UDCREG (DPLL_CTRL);
+ /* Set and check SOFT */
+ outw ((1 << 4) | (1 << 3) | 1, SOFT_REQ);
+ /* Short delay to wait for DPLL */
+ udelay (1000);
+
+ /* Print banner with device revision */
+ udc_rev = inw (UDC_REV) & 0xff;
+ printf ("USB: TI OMAP1510 USB function module rev %d.%d\n",
+ udc_rev >> 4, udc_rev & 0xf);
+
+#ifdef CONFIG_OMAP_SX1
+ i2c_read (0x32, 0x04, 1, &value, 1);
+ value |= 0x04;
+ i2c_write (0x32, 0x04, 1, &value, 1);
+
+ i2c_read (0x32, 0x03, 1, &value, 1);
+ value |= 0x01;
+ i2c_write (0x32, 0x03, 1, &value, 1);
+
+ gpio = inl(GPIO_PIN_CONTROL_REG);
+ gpio |= 0x0002; /* A_IRDA_OFF */
+ gpio |= 0x0800; /* A_SWITCH */
+ gpio |= 0x8000; /* A_USB_ON */
+ outl (gpio, GPIO_PIN_CONTROL_REG);
+
+ gpio = inl(GPIO_DIR_CONTROL_REG);
+ gpio &= ~0x0002; /* A_IRDA_OFF */
+ gpio &= ~0x0800; /* A_SWITCH */
+ gpio &= ~0x8000; /* A_USB_ON */
+ outl (gpio, GPIO_DIR_CONTROL_REG);
+
+ gpio = inl(GPIO_DATA_OUTPUT_REG);
+ gpio |= 0x0002; /* A_IRDA_OFF */
+ gpio &= ~0x0800; /* A_SWITCH */
+ gpio &= ~0x8000; /* A_USB_ON */
+ outl (gpio, GPIO_DATA_OUTPUT_REG);
+#endif
+
+ /* The VBUS_MODE bit selects whether VBUS detection is done via
+ * software (1) or hardware (0). When software detection is
+ * selected, VBUS_CTRL selects whether USB is not connected (0)
+ * or connected (1).
+ */
+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0);
+ outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0);
+ UDCREGL (FUNC_MUX_CTRL_0);
+
+ /*
+ * At this point, device is ready for configuration...
+ */
+
+ UDCDBG ("disable USB interrupts");
+ outw (0, UDC_IRQ_EN);
+ UDCREG (UDC_IRQ_EN);
+
+ UDCDBG ("disable USB DMA");
+ outw (0, UDC_DMA_IRQ_EN);
+ UDCREG (UDC_DMA_IRQ_EN);
+
+ UDCDBG ("initialize SYSCON1");
+ outw (UDC_Self_Pwr | UDC_Pullup_En, UDC_SYSCON1);
+ UDCREG (UDC_SYSCON1);
+
+ return 0;
+}
+
+/* Stall endpoint */
+static void udc_stall_ep (unsigned int ep_addr)
+{
+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
+
+ UDCDBGA ("stall ep_addr %d", ep_addr);
+
+ /* REVISIT?
+ * The OMAP TRM section 14.2.4.2 says we must check that the FIFO
+ * is empty before halting the endpoint. The current implementation
+ * doesn't check that the FIFO is empty.
+ */
+
+ if (!ep_num) {
+ outw (UDC_Stall_Cmd, UDC_SYSCON2);
+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
+ if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) {
+ /* we have a valid rx endpoint, so halt it */
+ outw (UDC_EP_Sel | ep_num, UDC_EP_NUM);
+ outw (UDC_Set_Halt, UDC_CTRL);
+ outw (ep_num, UDC_EP_NUM);
+ }
+ } else {
+ if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) {
+ /* we have a valid tx endpoint, so halt it */
+ outw (UDC_EP_Sel | UDC_EP_Dir | ep_num, UDC_EP_NUM);
+ outw (UDC_Set_Halt, UDC_CTRL);
+ outw (ep_num, UDC_EP_NUM);
+ }
+ }
+}
+
+/* Reset endpoint */
+#if 0
+static void udc_reset_ep (unsigned int ep_addr)
+{
+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
+
+ UDCDBGA ("reset ep_addr %d", ep_addr);
+
+ if (!ep_num) {
+ /* control endpoint 0 can't be reset */
+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
+ UDCDBGA ("UDC_EP_RX(%d) = 0x%04x", ep_num,
+ inw (UDC_EP_RX (ep_num)));
+ if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) {
+ /* we have a valid rx endpoint, so reset it */
+ outw (ep_num | UDC_EP_Sel, UDC_EP_NUM);
+ outw (UDC_Reset_EP, UDC_CTRL);
+ outw (ep_num, UDC_EP_NUM);
+ UDCDBGA ("OUT endpoint %d reset", ep_num);
+ }
+ } else {
+ UDCDBGA ("UDC_EP_TX(%d) = 0x%04x", ep_num,
+ inw (UDC_EP_TX (ep_num)));
+ /* Resetting of tx endpoints seems to be causing the USB function
+ * module to fail, which causes problems when the driver is
+ * uninstalled. We'll skip resetting tx endpoints for now until
+ * we figure out what the problem is.
+ */
+#if 0
+ if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) {
+ /* we have a valid tx endpoint, so reset it */
+ outw (ep_num | UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
+ outw (UDC_Reset_EP, UDC_CTRL);
+ outw (ep_num | UDC_EP_Dir, UDC_EP_NUM);
+ UDCDBGA ("IN endpoint %d reset", ep_num);
+ }
+#endif
+ }
+}
+#endif
+
+/* ************************************************************************** */
+
+/**
+ * udc_check_ep - check logical endpoint
+ *
+ * Return physical endpoint number to use for this logical endpoint or zero if not valid.
+ */
+#if 0
+int udc_check_ep (int logical_endpoint, int packetsize)
+{
+ if ((logical_endpoint == 0x80) ||
+ ((logical_endpoint & 0x8f) != logical_endpoint)) {
+ return 0;
+ }
+
+ switch (packetsize) {
+ case 8:
+ case 16:
+ case 32:
+ case 64:
+ case 128:
+ case 256:
+ case 512:
+ break;
+ default:
+ return 0;
+ }
+
+ return EP_ADDR_TO_PHYS_EP (logical_endpoint);
+}
+#endif
+
+/*
+ * udc_setup_ep - setup endpoint
+ *
+ * Associate a physical endpoint with endpoint_instance
+ */
+void udc_setup_ep (struct usb_device_instance *device,
+ unsigned int ep, struct usb_endpoint_instance *endpoint)
+{
+ UDCDBGA ("setting up endpoint addr %x", endpoint->endpoint_address);
+
+ /* This routine gets called by bi_modinit for endpoint 0 and from
+ * bi_config for all of the other endpoints. bi_config gets called
+ * during the DEVICE_CREATE, DEVICE_CONFIGURED, and
+ * DEVICE_SET_INTERFACE events. We need to reconfigure the OMAP packet
+ * RAM after bi_config scans the selected device configuration and
+ * initializes the endpoint structures, but before this routine enables
+ * the OUT endpoint FIFOs. Since bi_config calls this routine in a
+ * loop for endpoints 1 through UDC_MAX_ENDPOINTS, we reconfigure our
+ * packet RAM here when ep==1.
+ * I really hate to do this here, but it seems like the API exported
+ * by the USB bus interface controller driver to the usbd-bi module
+ * isn't quite right so there is no good place to do this.
+ */
+ if (ep == 1) {
+ omap1510_deconfigure_device ();
+ omap1510_configure_device (device);
+ }
+
+ if (endpoint && (ep < UDC_MAX_ENDPOINTS)) {
+ int ep_addr = endpoint->endpoint_address;
+
+ if (!ep_addr) {
+ /* nothing to do for endpoint 0 */
+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+ /* nothing to do for IN (tx) endpoints */
+ } else { /* OUT (rx) endpoint */
+ if (endpoint->rcv_packetSize) {
+ /*struct urb* urb = &(urb_out_array[ep&0xFF]); */
+ /*urb->endpoint = endpoint; */
+ /*urb->device = device; */
+ /*urb->buffer_length = sizeof(urb->buffer); */
+
+ /*endpoint->rcv_urb = urb; */
+ omap1510_prepare_endpoint_for_rx (ep_addr);
+ }
+ }
+ }
+}
+
+/**
+ * udc_disable_ep - disable endpoint
+ * @ep:
+ *
+ * Disable specified endpoint
+ */
+#if 0
+void udc_disable_ep (unsigned int ep_addr)
+{
+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
+ struct usb_endpoint_instance *endpoint = omap1510_find_ep (ep_addr); /*udc_device->bus->endpoint_array + ep; */
+
+ UDCDBGA ("disable ep_addr %d", ep_addr);
+
+ if (!ep_num) {
+ /* nothing to do for endpoint 0 */ ;
+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+ if (endpoint->tx_packetSize) {
+ /* we have a valid tx endpoint */
+ /*usbd_flush_tx(endpoint); */
+ endpoint->tx_urb = NULL;
+ }
+ } else {
+ if (endpoint->rcv_packetSize) {
+ /* we have a valid rx endpoint */
+ /*usbd_flush_rcv(endpoint); */
+ endpoint->rcv_urb = NULL;
+ }
+ }
+}
+#endif
+
+/* ************************************************************************** */
+
+/**
+ * udc_connected - is the USB cable connected
+ *
+ * Return non-zero if cable is connected.
+ */
+#if 0
+int udc_connected (void)
+{
+ return ((inw (UDC_DEVSTAT) & UDC_ATT) == UDC_ATT);
+}
+#endif
+
+/* Turn on the USB connection by enabling the pullup resistor */
+void udc_connect (void)
+{
+ UDCDBG ("connect, enable Pullup");
+ outl (0x00000018, FUNC_MUX_CTRL_D);
+}
+
+/* Turn off the USB connection by disabling the pullup resistor */
+void udc_disconnect (void)
+{
+ UDCDBG ("disconnect, disable Pullup");
+ outl (0x00000000, FUNC_MUX_CTRL_D);
+}
+
+/* ************************************************************************** */
+
+
+/*
+ * udc_disable_interrupts - disable interrupts
+ * switch off interrupts
+ */
+#if 0
+void udc_disable_interrupts (struct usb_device_instance *device)
+{
+ UDCDBG ("disabling all interrupts");
+ outw (0, UDC_IRQ_EN);
+}
+#endif
+
+/* ************************************************************************** */
+
+/**
+ * udc_ep0_packetsize - return ep0 packetsize
+ */
+#if 0
+int udc_ep0_packetsize (void)
+{
+ return EP0_PACKETSIZE;
+}
+#endif
+
+/* Switch on the UDC */
+void udc_enable (struct usb_device_instance *device)
+{
+ UDCDBGA ("enable device %p, status %d", device, device->status);
+
+ /* initialize driver state variables */
+ udc_devstat = 0;
+
+ /* Save the device structure pointer */
+ udc_device = device;
+
+ /* Setup ep0 urb */
+ if (!ep0_urb) {
+ ep0_urb =
+ usbd_alloc_urb (udc_device,
+ udc_device->bus->endpoint_array);
+ } else {
+ serial_printf ("udc_enable: ep0_urb already allocated %p\n",
+ ep0_urb);
+ }
+
+ UDCDBG ("Check clock status");
+ UDCREG (STATUS_REQ);
+
+ /* The VBUS_MODE bit selects whether VBUS detection is done via
+ * software (1) or hardware (0). When software detection is
+ * selected, VBUS_CTRL selects whether USB is not connected (0)
+ * or connected (1).
+ */
+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_CTRL | UDC_VBUS_MODE,
+ FUNC_MUX_CTRL_0);
+ UDCREGL (FUNC_MUX_CTRL_0);
+
+ omap1510_configure_device (device);
+}
+
+/* Switch off the UDC */
+void udc_disable (void)
+{
+ UDCDBG ("disable UDC");
+
+ omap1510_deconfigure_device ();
+
+ /* The VBUS_MODE bit selects whether VBUS detection is done via
+ * software (1) or hardware (0). When software detection is
+ * selected, VBUS_CTRL selects whether USB is not connected (0)
+ * or connected (1).
+ */
+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0);
+ outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0);
+ UDCREGL (FUNC_MUX_CTRL_0);
+
+ /* Free ep0 URB */
+ if (ep0_urb) {
+ /*usbd_dealloc_urb(ep0_urb); */
+ ep0_urb = NULL;
+ }
+
+ /* Reset device pointer.
+ * We ought to do this here to balance the initialization of udc_device
+ * in udc_enable, but some of our other exported functions get called
+ * by the bus interface driver after udc_disable, so we have to hang on
+ * to the device pointer to avoid a null pointer dereference. */
+ /* udc_device = NULL; */
+}
+
+/**
+ * udc_startup - allow udc code to do any additional startup
+ */
+void udc_startup_events (struct usb_device_instance *device)
+{
+ /* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */
+ usbd_device_event_irq (device, DEVICE_INIT, 0);
+
+ /* The DEVICE_CREATE event puts the USB device in the state
+ * STATE_ATTACHED.
+ */
+ usbd_device_event_irq (device, DEVICE_CREATE, 0);
+
+ /* Some USB controller driver implementations signal
+ * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here.
+ * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED,
+ * and DEVICE_RESET causes a transition to the state STATE_DEFAULT.
+ * The OMAP USB client controller has the capability to detect when the
+ * USB cable is connected to a powered USB bus via the ATT bit in the
+ * DEVSTAT register, so we will defer the DEVICE_HUB_CONFIGURED and
+ * DEVICE_RESET events until later.
+ */
+
+ udc_enable (device);
+}
+
+/**
+ * udc_irq - do pseudo interrupts
+ */
+void udc_irq(void)
+{
+ /* Loop while we have interrupts.
+ * If we don't do this, the input chain
+ * polling delay is likely to miss
+ * host requests.
+ */
+ while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) {
+ /* Handle any new IRQs */
+ omap1510_udc_irq ();
+ omap1510_udc_noniso_irq ();
+ }
+}
+
+/* Flow control */
+void udc_set_nak(int epid)
+{
+ /* TODO: implement this functionality in omap1510 */
+}
+
+void udc_unset_nak (int epid)
+{
+ /* TODO: implement this functionality in omap1510 */
+}
+#endif
+++ /dev/null
-/*
- * URB OHCI HCD (Host Controller Driver) for USB on the AT91RM9200 and PCI bus.
- *
- * Interrupt support is added. Now, it has been tested
- * on ULI1575 chip and works well with USB keyboard.
- *
- * (C) Copyright 2007
- * Zhang Wei, Freescale Semiconductor, Inc. <wei.zhang@freescale.com>
- *
- * (C) Copyright 2003
- * Gary Jennejohn, DENX Software Engineering <gj@denx.de>
- *
- * Note: Much of this code has been derived from Linux 2.4
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell
- *
- * Modified for the MP2USB by (C) Copyright 2005 Eric Benard
- * ebenard@eukrea.com - based on s3c24x0's driver
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-/*
- * IMPORTANT NOTES
- * 1 - Read doc/README.generic_usb_ohci
- * 2 - this driver is intended for use with USB Mass Storage Devices
- * (BBB) and USB keyboard. There is NO support for Isochronous pipes!
- * 2 - when running on a PQFP208 AT91RM9200, define CONFIG_AT91C_PQFP_UHPBUG
- * to activate workaround for bug #41 or this driver will NOT work!
- */
-
-#include <common.h>
-
-#ifdef CONFIG_USB_OHCI_NEW
-
-#include <asm/byteorder.h>
-
-#if defined(CONFIG_PCI_OHCI)
-# include <pci.h>
-#endif
-
-#include <malloc.h>
-#include <usb.h>
-#include "usb_ohci.h"
-
-#ifdef CONFIG_AT91RM9200
-#include <asm/arch/hardware.h> /* needed for AT91_USB_HOST_BASE */
-#endif
-
-#if defined(CONFIG_ARM920T) || \
- defined(CONFIG_S3C2400) || \
- defined(CONFIG_S3C2410) || \
- defined(CONFIG_440EP) || \
- defined(CONFIG_PCI_OHCI) || \
- defined(CONFIG_MPC5200)
-# define OHCI_USE_NPS /* force NoPowerSwitching mode */
-#endif
-
-#undef OHCI_VERBOSE_DEBUG /* not always helpful */
-#undef DEBUG
-#undef SHOW_INFO
-#undef OHCI_FILL_TRACE
-
-/* For initializing controller (mask in an HCFS mode too) */
-#define OHCI_CONTROL_INIT \
- (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
-
-/*
- * e.g. PCI controllers need this
- */
-#ifdef CFG_OHCI_SWAP_REG_ACCESS
-# define readl(a) __swap_32(*((vu_long *)(a)))
-# define writel(a, b) (*((vu_long *)(b)) = __swap_32((vu_long)a))
-#else
-# define readl(a) (*((vu_long *)(a)))
-# define writel(a, b) (*((vu_long *)(b)) = ((vu_long)a))
-#endif /* CFG_OHCI_SWAP_REG_ACCESS */
-
-#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-
-#ifdef CONFIG_PCI_OHCI
-static struct pci_device_id ohci_pci_ids[] = {
- {0x10b9, 0x5237}, /* ULI1575 PCI OHCI module ids */
- {0x1033, 0x0035}, /* NEC PCI OHCI module ids */
- /* Please add supported PCI OHCI controller ids here */
- {0, 0}
-};
-#endif
-
-#ifdef DEBUG
-#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
-#else
-#define dbg(format, arg...) do {} while(0)
-#endif /* DEBUG */
-#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
-#undef SHOW_INFO
-#ifdef SHOW_INFO
-#define info(format, arg...) printf("INFO: " format "\n", ## arg)
-#else
-#define info(format, arg...) do {} while(0)
-#endif
-
-#ifdef CFG_OHCI_BE_CONTROLLER
-# define m16_swap(x) cpu_to_be16(x)
-# define m32_swap(x) cpu_to_be32(x)
-#else
-# define m16_swap(x) cpu_to_le16(x)
-# define m32_swap(x) cpu_to_le32(x)
-#endif /* CFG_OHCI_BE_CONTROLLER */
-
-/* global ohci_t */
-static ohci_t gohci;
-/* this must be aligned to a 256 byte boundary */
-struct ohci_hcca ghcca[1];
-/* a pointer to the aligned storage */
-struct ohci_hcca *phcca;
-/* this allocates EDs for all possible endpoints */
-struct ohci_device ohci_dev;
-/* RHSC flag */
-int got_rhsc;
-/* device which was disconnected */
-struct usb_device *devgone;
-
-/*-------------------------------------------------------------------------*/
-
-/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
- * The erratum (#4) description is incorrect. AMD's workaround waits
- * till some bits (mostly reserved) are clear; ok for all revs.
- */
-#define OHCI_QUIRK_AMD756 0xabcd
-#define read_roothub(hc, register, mask) ({ \
- u32 temp = readl (&hc->regs->roothub.register); \
- if (hc->flags & OHCI_QUIRK_AMD756) \
- while (temp & mask) \
- temp = readl (&hc->regs->roothub.register); \
- temp; })
-
-static u32 roothub_a (struct ohci *hc)
- { return read_roothub (hc, a, 0xfc0fe000); }
-static inline u32 roothub_b (struct ohci *hc)
- { return readl (&hc->regs->roothub.b); }
-static inline u32 roothub_status (struct ohci *hc)
- { return readl (&hc->regs->roothub.status); }
-static u32 roothub_portstatus (struct ohci *hc, int i)
- { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
-
-/* forward declaration */
-static int hc_interrupt (void);
-static void
-td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
- int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
-
-/*-------------------------------------------------------------------------*
- * URB support functions
- *-------------------------------------------------------------------------*/
-
-/* free HCD-private data associated with this URB */
-
-static void urb_free_priv (urb_priv_t * urb)
-{
- int i;
- int last;
- struct td * td;
-
- last = urb->length - 1;
- if (last >= 0) {
- for (i = 0; i <= last; i++) {
- td = urb->td[i];
- if (td) {
- td->usb_dev = NULL;
- urb->td[i] = NULL;
- }
- }
- }
- free(urb);
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-static int sohci_get_current_frame_number (struct usb_device * dev);
-
-/* debug| print the main components of an URB
- * small: 0) header + data packets 1) just header */
-
-static void pkt_print (urb_priv_t *purb, struct usb_device * dev,
- unsigned long pipe, void * buffer,
- int transfer_len, struct devrequest * setup, char * str, int small)
-{
- dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
- str,
- sohci_get_current_frame_number (dev),
- usb_pipedevice (pipe),
- usb_pipeendpoint (pipe),
- usb_pipeout (pipe)? 'O': 'I',
- usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
- (usb_pipecontrol (pipe)? "CTRL": "BULK"),
- (purb ? purb->actual_length : 0),
- transfer_len, dev->status);
-#ifdef OHCI_VERBOSE_DEBUG
- if (!small) {
- int i, len;
-
- if (usb_pipecontrol (pipe)) {
- printf (__FILE__ ": cmd(8):");
- for (i = 0; i < 8 ; i++)
- printf (" %02x", ((__u8 *) setup) [i]);
- printf ("\n");
- }
- if (transfer_len > 0 && buffer) {
- printf (__FILE__ ": data(%d/%d):",
- (purb ? purb->actual_length : 0),
- transfer_len);
- len = usb_pipeout (pipe)?
- transfer_len:
- (purb ? purb->actual_length : 0);
- for (i = 0; i < 16 && i < len; i++)
- printf (" %02x", ((__u8 *) buffer) [i]);
- printf ("%s\n", i < len? "...": "");
- }
- }
-#endif
-}
-
-/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
-void ep_print_int_eds (ohci_t *ohci, char * str) {
- int i, j;
- __u32 * ed_p;
- for (i= 0; i < 32; i++) {
- j = 5;
- ed_p = &(ohci->hcca->int_table [i]);
- if (*ed_p == 0)
- continue;
- printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
- while (*ed_p != 0 && j--) {
- ed_t *ed = (ed_t *)m32_swap(ed_p);
- printf (" ed: %4x;", ed->hwINFO);
- ed_p = &ed->hwNextED;
- }
- printf ("\n");
- }
-}
-
-static void ohci_dump_intr_mask (char *label, __u32 mask)
-{
- dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
- label,
- mask,
- (mask & OHCI_INTR_MIE) ? " MIE" : "",
- (mask & OHCI_INTR_OC) ? " OC" : "",
- (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
- (mask & OHCI_INTR_FNO) ? " FNO" : "",
- (mask & OHCI_INTR_UE) ? " UE" : "",
- (mask & OHCI_INTR_RD) ? " RD" : "",
- (mask & OHCI_INTR_SF) ? " SF" : "",
- (mask & OHCI_INTR_WDH) ? " WDH" : "",
- (mask & OHCI_INTR_SO) ? " SO" : ""
- );
-}
-
-static void maybe_print_eds (char *label, __u32 value)
-{
- ed_t *edp = (ed_t *)value;
-
- if (value) {
- dbg ("%s %08x", label, value);
- dbg ("%08x", edp->hwINFO);
- dbg ("%08x", edp->hwTailP);
- dbg ("%08x", edp->hwHeadP);
- dbg ("%08x", edp->hwNextED);
- }
-}
-
-static char * hcfs2string (int state)
-{
- switch (state) {
- case OHCI_USB_RESET: return "reset";
- case OHCI_USB_RESUME: return "resume";
- case OHCI_USB_OPER: return "operational";
- case OHCI_USB_SUSPEND: return "suspend";
- }
- return "?";
-}
-
-/* dump control and status registers */
-static void ohci_dump_status (ohci_t *controller)
-{
- struct ohci_regs *regs = controller->regs;
- __u32 temp;
-
- temp = readl (®s->revision) & 0xff;
- if (temp != 0x10)
- dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
-
- temp = readl (®s->control);
- dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
- (temp & OHCI_CTRL_RWE) ? " RWE" : "",
- (temp & OHCI_CTRL_RWC) ? " RWC" : "",
- (temp & OHCI_CTRL_IR) ? " IR" : "",
- hcfs2string (temp & OHCI_CTRL_HCFS),
- (temp & OHCI_CTRL_BLE) ? " BLE" : "",
- (temp & OHCI_CTRL_CLE) ? " CLE" : "",
- (temp & OHCI_CTRL_IE) ? " IE" : "",
- (temp & OHCI_CTRL_PLE) ? " PLE" : "",
- temp & OHCI_CTRL_CBSR
- );
-
- temp = readl (®s->cmdstatus);
- dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
- (temp & OHCI_SOC) >> 16,
- (temp & OHCI_OCR) ? " OCR" : "",
- (temp & OHCI_BLF) ? " BLF" : "",
- (temp & OHCI_CLF) ? " CLF" : "",
- (temp & OHCI_HCR) ? " HCR" : ""
- );
-
- ohci_dump_intr_mask ("intrstatus", readl (®s->intrstatus));
- ohci_dump_intr_mask ("intrenable", readl (®s->intrenable));
-
- maybe_print_eds ("ed_periodcurrent", readl (®s->ed_periodcurrent));
-
- maybe_print_eds ("ed_controlhead", readl (®s->ed_controlhead));
- maybe_print_eds ("ed_controlcurrent", readl (®s->ed_controlcurrent));
-
- maybe_print_eds ("ed_bulkhead", readl (®s->ed_bulkhead));
- maybe_print_eds ("ed_bulkcurrent", readl (®s->ed_bulkcurrent));
-
- maybe_print_eds ("donehead", readl (®s->donehead));
-}
-
-static void ohci_dump_roothub (ohci_t *controller, int verbose)
-{
- __u32 temp, ndp, i;
-
- temp = roothub_a (controller);
- ndp = (temp & RH_A_NDP);
-#ifdef CONFIG_AT91C_PQFP_UHPBUG
- ndp = (ndp == 2) ? 1:0;
-#endif
- if (verbose) {
- dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
- ((temp & RH_A_POTPGT) >> 24) & 0xff,
- (temp & RH_A_NOCP) ? " NOCP" : "",
- (temp & RH_A_OCPM) ? " OCPM" : "",
- (temp & RH_A_DT) ? " DT" : "",
- (temp & RH_A_NPS) ? " NPS" : "",
- (temp & RH_A_PSM) ? " PSM" : "",
- ndp
- );
- temp = roothub_b (controller);
- dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
- temp,
- (temp & RH_B_PPCM) >> 16,
- (temp & RH_B_DR)
- );
- temp = roothub_status (controller);
- dbg ("roothub.status: %08x%s%s%s%s%s%s",
- temp,
- (temp & RH_HS_CRWE) ? " CRWE" : "",
- (temp & RH_HS_OCIC) ? " OCIC" : "",
- (temp & RH_HS_LPSC) ? " LPSC" : "",
- (temp & RH_HS_DRWE) ? " DRWE" : "",
- (temp & RH_HS_OCI) ? " OCI" : "",
- (temp & RH_HS_LPS) ? " LPS" : ""
- );
- }
-
- for (i = 0; i < ndp; i++) {
- temp = roothub_portstatus (controller, i);
- dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
- i,
- temp,
- (temp & RH_PS_PRSC) ? " PRSC" : "",
- (temp & RH_PS_OCIC) ? " OCIC" : "",
- (temp & RH_PS_PSSC) ? " PSSC" : "",
- (temp & RH_PS_PESC) ? " PESC" : "",
- (temp & RH_PS_CSC) ? " CSC" : "",
-
- (temp & RH_PS_LSDA) ? " LSDA" : "",
- (temp & RH_PS_PPS) ? " PPS" : "",
- (temp & RH_PS_PRS) ? " PRS" : "",
- (temp & RH_PS_POCI) ? " POCI" : "",
- (temp & RH_PS_PSS) ? " PSS" : "",
-
- (temp & RH_PS_PES) ? " PES" : "",
- (temp & RH_PS_CCS) ? " CCS" : ""
- );
- }
-}
-
-static void ohci_dump (ohci_t *controller, int verbose)
-{
- dbg ("OHCI controller usb-%s state", controller->slot_name);
-
- /* dumps some of the state we know about */
- ohci_dump_status (controller);
- if (verbose)
- ep_print_int_eds (controller, "hcca");
- dbg ("hcca frame #%04x", controller->hcca->frame_no);
- ohci_dump_roothub (controller, 1);
-
-#endif /* DEBUG */
-
-/*-------------------------------------------------------------------------*
- * Interface functions (URB)
- *-------------------------------------------------------------------------*/
-
-/* get a transfer request */
-
-int sohci_submit_job(urb_priv_t *urb, struct devrequest *setup)
-{
- ohci_t *ohci;
- ed_t * ed;
- urb_priv_t *purb_priv = urb;
- int i, size = 0;
- struct usb_device *dev = urb->dev;
- unsigned long pipe = urb->pipe;
- void *buffer = urb->transfer_buffer;
- int transfer_len = urb->transfer_buffer_length;
- int interval = urb->interval;
-
- ohci = &gohci;
-
- /* when controller's hung, permit only roothub cleanup attempts
- * such as powering down ports */
- if (ohci->disabled) {
- err("sohci_submit_job: EPIPE");
- return -1;
- }
-
- /* we're about to begin a new transaction here so mark the URB unfinished */
- urb->finished = 0;
-
- /* every endpoint has a ed, locate and fill it */
- if (!(ed = ep_add_ed (dev, pipe, interval, 1))) {
- err("sohci_submit_job: ENOMEM");
- return -1;
- }
-
- /* for the private part of the URB we need the number of TDs (size) */
- switch (usb_pipetype (pipe)) {
- case PIPE_BULK: /* one TD for every 4096 Byte */
- size = (transfer_len - 1) / 4096 + 1;
- break;
- case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
- size = (transfer_len == 0)? 2:
- (transfer_len - 1) / 4096 + 3;
- break;
- case PIPE_INTERRUPT: /* 1 TD */
- size = 1;
- break;
- }
-
- ed->purb = urb;
-
- if (size >= (N_URB_TD - 1)) {
- err("need %d TDs, only have %d", size, N_URB_TD);
- return -1;
- }
- purb_priv->pipe = pipe;
-
- /* fill the private part of the URB */
- purb_priv->length = size;
- purb_priv->ed = ed;
- purb_priv->actual_length = 0;
-
- /* allocate the TDs */
- /* note that td[0] was allocated in ep_add_ed */
- for (i = 0; i < size; i++) {
- purb_priv->td[i] = td_alloc (dev);
- if (!purb_priv->td[i]) {
- purb_priv->length = i;
- urb_free_priv (purb_priv);
- err("sohci_submit_job: ENOMEM");
- return -1;
- }
- }
-
- if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
- urb_free_priv (purb_priv);
- err("sohci_submit_job: EINVAL");
- return -1;
- }
-
- /* link the ed into a chain if is not already */
- if (ed->state != ED_OPER)
- ep_link (ohci, ed);
-
- /* fill the TDs and link it to the ed */
- td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
-
- return 0;
-}
-
-static inline int sohci_return_job(struct ohci *hc, urb_priv_t *urb)
-{
- struct ohci_regs *regs = hc->regs;
-
- switch (usb_pipetype (urb->pipe)) {
- case PIPE_INTERRUPT:
- /* implicitly requeued */
- if (urb->dev->irq_handle &&
- (urb->dev->irq_act_len = urb->actual_length)) {
- writel (OHCI_INTR_WDH, ®s->intrenable);
- readl (®s->intrenable); /* PCI posting flush */
- urb->dev->irq_handle(urb->dev);
- writel (OHCI_INTR_WDH, ®s->intrdisable);
- readl (®s->intrdisable); /* PCI posting flush */
- }
- urb->actual_length = 0;
- td_submit_job (
- urb->dev,
- urb->pipe,
- urb->transfer_buffer,
- urb->transfer_buffer_length,
- NULL,
- urb,
- urb->interval);
- break;
- case PIPE_CONTROL:
- case PIPE_BULK:
- break;
- default:
- return 0;
- }
- return 1;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-/* tell us the current USB frame number */
-
-static int sohci_get_current_frame_number (struct usb_device *usb_dev)
-{
- ohci_t *ohci = &gohci;
-
- return m16_swap (ohci->hcca->frame_no);
-}
-#endif
-
-/*-------------------------------------------------------------------------*
- * ED handling functions
- *-------------------------------------------------------------------------*/
-
-/* search for the right branch to insert an interrupt ed into the int tree
- * do some load ballancing;
- * returns the branch and
- * sets the interval to interval = 2^integer (ld (interval)) */
-
-static int ep_int_ballance (ohci_t * ohci, int interval, int load)
-{
- int i, branch = 0;
-
- /* search for the least loaded interrupt endpoint
- * branch of all 32 branches
- */
- for (i = 0; i < 32; i++)
- if (ohci->ohci_int_load [branch] > ohci->ohci_int_load [i])
- branch = i;
-
- branch = branch % interval;
- for (i = branch; i < 32; i += interval)
- ohci->ohci_int_load [i] += load;
-
- return branch;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* 2^int( ld (inter)) */
-
-static int ep_2_n_interval (int inter)
-{
- int i;
- for (i = 0; ((inter >> i) > 1 ) && (i < 5); i++);
- return 1 << i;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* the int tree is a binary tree
- * in order to process it sequentially the indexes of the branches have to be mapped
- * the mapping reverses the bits of a word of num_bits length */
-
-static int ep_rev (int num_bits, int word)
-{
- int i, wout = 0;
-
- for (i = 0; i < num_bits; i++)
- wout |= (((word >> i) & 1) << (num_bits - i - 1));
- return wout;
-}
-
-/*-------------------------------------------------------------------------*
- * ED handling functions
- *-------------------------------------------------------------------------*/
-
-/* link an ed into one of the HC chains */
-
-static int ep_link (ohci_t *ohci, ed_t *edi)
-{
- volatile ed_t *ed = edi;
- int int_branch;
- int i;
- int inter;
- int interval;
- int load;
- __u32 * ed_p;
-
- ed->state = ED_OPER;
- ed->int_interval = 0;
-
- switch (ed->type) {
- case PIPE_CONTROL:
- ed->hwNextED = 0;
- if (ohci->ed_controltail == NULL) {
- writel (ed, &ohci->regs->ed_controlhead);
- } else {
- ohci->ed_controltail->hwNextED = m32_swap ((unsigned long)ed);
- }
- ed->ed_prev = ohci->ed_controltail;
- if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
- !ohci->ed_rm_list[1] && !ohci->sleeping) {
- ohci->hc_control |= OHCI_CTRL_CLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- ohci->ed_controltail = edi;
- break;
-
- case PIPE_BULK:
- ed->hwNextED = 0;
- if (ohci->ed_bulktail == NULL) {
- writel (ed, &ohci->regs->ed_bulkhead);
- } else {
- ohci->ed_bulktail->hwNextED = m32_swap ((unsigned long)ed);
- }
- ed->ed_prev = ohci->ed_bulktail;
- if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
- !ohci->ed_rm_list[1] && !ohci->sleeping) {
- ohci->hc_control |= OHCI_CTRL_BLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- ohci->ed_bulktail = edi;
- break;
-
- case PIPE_INTERRUPT:
- load = ed->int_load;
- interval = ep_2_n_interval (ed->int_period);
- ed->int_interval = interval;
- int_branch = ep_int_ballance (ohci, interval, load);
- ed->int_branch = int_branch;
-
- for (i = 0; i < ep_rev (6, interval); i += inter) {
- inter = 1;
- for (ed_p = &(ohci->hcca->int_table[ep_rev (5, i) + int_branch]);
- (*ed_p != 0) && (((ed_t *)ed_p)->int_interval >= interval);
- ed_p = &(((ed_t *)ed_p)->hwNextED))
- inter = ep_rev (6, ((ed_t *)ed_p)->int_interval);
- ed->hwNextED = *ed_p;
- *ed_p = m32_swap((unsigned long)ed);
- }
- break;
- }
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* scan the periodic table to find and unlink this ED */
-static void periodic_unlink ( struct ohci *ohci, volatile struct ed *ed,
- unsigned index, unsigned period)
-{
- for (; index < NUM_INTS; index += period) {
- __u32 *ed_p = &ohci->hcca->int_table [index];
-
- /* ED might have been unlinked through another path */
- while (*ed_p != 0) {
- if (((struct ed *)m32_swap ((unsigned long)ed_p)) == ed) {
- *ed_p = ed->hwNextED;
- break;
- }
- ed_p = & (((struct ed *)m32_swap ((unsigned long)ed_p))->hwNextED);
- }
- }
-}
-
-/* unlink an ed from one of the HC chains.
- * just the link to the ed is unlinked.
- * the link from the ed still points to another operational ed or 0
- * so the HC can eventually finish the processing of the unlinked ed */
-
-static int ep_unlink (ohci_t *ohci, ed_t *edi)
-{
- volatile ed_t *ed = edi;
- int i;
-
- ed->hwINFO |= m32_swap (OHCI_ED_SKIP);
-
- switch (ed->type) {
- case PIPE_CONTROL:
- if (ed->ed_prev == NULL) {
- if (!ed->hwNextED) {
- ohci->hc_control &= ~OHCI_CTRL_CLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
- } else {
- ed->ed_prev->hwNextED = ed->hwNextED;
- }
- if (ohci->ed_controltail == ed) {
- ohci->ed_controltail = ed->ed_prev;
- } else {
- ((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
- }
- break;
-
- case PIPE_BULK:
- if (ed->ed_prev == NULL) {
- if (!ed->hwNextED) {
- ohci->hc_control &= ~OHCI_CTRL_BLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
- } else {
- ed->ed_prev->hwNextED = ed->hwNextED;
- }
- if (ohci->ed_bulktail == ed) {
- ohci->ed_bulktail = ed->ed_prev;
- } else {
- ((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
- }
- break;
-
- case PIPE_INTERRUPT:
- periodic_unlink (ohci, ed, 0, 1);
- for (i = ed->int_branch; i < 32; i += ed->int_interval)
- ohci->ohci_int_load[i] -= ed->int_load;
- break;
- }
- ed->state = ED_UNLINK;
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* add/reinit an endpoint; this should be done once at the
- * usb_set_configuration command, but the USB stack is a little bit
- * stateless so we do it at every transaction if the state of the ed
- * is ED_NEW then a dummy td is added and the state is changed to
- * ED_UNLINK in all other cases the state is left unchanged the ed
- * info fields are setted anyway even though most of them should not
- * change
- */
-static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe,
- int interval, int load)
-{
- td_t *td;
- ed_t *ed_ret;
- volatile ed_t *ed;
-
- ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
- (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
-
- if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
- err("ep_add_ed: pending delete");
- /* pending delete request */
- return NULL;
- }
-
- if (ed->state == ED_NEW) {
- ed->hwINFO = m32_swap (OHCI_ED_SKIP); /* skip ed */
- /* dummy td; end of td list for ed */
- td = td_alloc (usb_dev);
- ed->hwTailP = m32_swap ((unsigned long)td);
- ed->hwHeadP = ed->hwTailP;
- ed->state = ED_UNLINK;
- ed->type = usb_pipetype (pipe);
- ohci_dev.ed_cnt++;
- }
-
- ed->hwINFO = m32_swap (usb_pipedevice (pipe)
- | usb_pipeendpoint (pipe) << 7
- | (usb_pipeisoc (pipe)? 0x8000: 0)
- | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
- | usb_pipeslow (pipe) << 13
- | usb_maxpacket (usb_dev, pipe) << 16);
-
- if (ed->type == PIPE_INTERRUPT && ed->state == ED_UNLINK) {
- ed->int_period = interval;
- ed->int_load = load;
- }
-
- return ed_ret;
-}
-
-/*-------------------------------------------------------------------------*
- * TD handling functions
- *-------------------------------------------------------------------------*/
-
-/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
-
-static void td_fill (ohci_t *ohci, unsigned int info,
- void *data, int len,
- struct usb_device *dev, int index, urb_priv_t *urb_priv)
-{
- volatile td_t *td, *td_pt;
-#ifdef OHCI_FILL_TRACE
- int i;
-#endif
-
- if (index > urb_priv->length) {
- err("index > length");
- return;
- }
- /* use this td as the next dummy */
- td_pt = urb_priv->td [index];
- td_pt->hwNextTD = 0;
-
- /* fill the old dummy TD */
- td = urb_priv->td [index] = (td_t *)(m32_swap (urb_priv->ed->hwTailP) & ~0xf);
-
- td->ed = urb_priv->ed;
- td->next_dl_td = NULL;
- td->index = index;
- td->data = (__u32)data;
-#ifdef OHCI_FILL_TRACE
- if ((usb_pipetype(urb_priv->pipe) == PIPE_BULK) && usb_pipeout(urb_priv->pipe)) {
- for (i = 0; i < len; i++)
- printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
- printf("\n");
- }
-#endif
- if (!len)
- data = 0;
-
- td->hwINFO = m32_swap (info);
- td->hwCBP = m32_swap ((unsigned long)data);
- if (data)
- td->hwBE = m32_swap ((unsigned long)(data + len - 1));
- else
- td->hwBE = 0;
- td->hwNextTD = m32_swap ((unsigned long)td_pt);
-
- /* append to queue */
- td->ed->hwTailP = td->hwNextTD;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* prepare all TDs of a transfer */
-
-static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
-{
- ohci_t *ohci = &gohci;
- int data_len = transfer_len;
- void *data;
- int cnt = 0;
- __u32 info = 0;
- unsigned int toggle = 0;
-
- /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
- if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
- toggle = TD_T_TOGGLE;
- } else {
- toggle = TD_T_DATA0;
- usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
- }
- urb->td_cnt = 0;
- if (data_len)
- data = buffer;
- else
- data = 0;
-
- switch (usb_pipetype (pipe)) {
- case PIPE_BULK:
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
- while(data_len > 4096) {
- td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
- data += 4096; data_len -= 4096; cnt++;
- }
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
- td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
- cnt++;
-
- if (!ohci->sleeping)
- writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
- break;
-
- case PIPE_CONTROL:
- info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
- td_fill (ohci, info, setup, 8, dev, cnt++, urb);
- if (data_len > 0) {
- info = usb_pipeout (pipe)?
- TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
- /* NOTE: mishandles transfers >8K, some >4K */
- td_fill (ohci, info, data, data_len, dev, cnt++, urb);
- }
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
- td_fill (ohci, info, data, 0, dev, cnt++, urb);
- if (!ohci->sleeping)
- writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
- break;
-
- case PIPE_INTERRUPT:
- info = usb_pipeout (urb->pipe)?
- TD_CC | TD_DP_OUT | toggle:
- TD_CC | TD_R | TD_DP_IN | toggle;
- td_fill (ohci, info, data, data_len, dev, cnt++, urb);
- break;
- }
- if (urb->length != cnt)
- dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
-}
-
-/*-------------------------------------------------------------------------*
- * Done List handling functions
- *-------------------------------------------------------------------------*/
-
-/* calculate the transfer length and update the urb */
-
-static void dl_transfer_length(td_t * td)
-{
- __u32 tdINFO, tdBE, tdCBP;
- urb_priv_t *lurb_priv = td->ed->purb;
-
- tdINFO = m32_swap (td->hwINFO);
- tdBE = m32_swap (td->hwBE);
- tdCBP = m32_swap (td->hwCBP);
-
- if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL &&
- ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
- if (tdBE != 0) {
- if (td->hwCBP == 0)
- lurb_priv->actual_length += tdBE - td->data + 1;
- else
- lurb_priv->actual_length += tdCBP - td->data;
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* replies to the request have to be on a FIFO basis so
- * we reverse the reversed done-list */
-
-static td_t * dl_reverse_done_list (ohci_t *ohci)
-{
- __u32 td_list_hc;
- td_t *td_rev = NULL;
- td_t *td_list = NULL;
- urb_priv_t *lurb_priv = NULL;
-
- td_list_hc = m32_swap (ohci->hcca->done_head) & 0xfffffff0;
- ohci->hcca->done_head = 0;
-
- while (td_list_hc) {
- td_list = (td_t *)td_list_hc;
-
- if (TD_CC_GET (m32_swap (td_list->hwINFO))) {
- lurb_priv = td_list->ed->purb;
- dbg(" USB-error/status: %x : %p",
- TD_CC_GET (m32_swap (td_list->hwINFO)), td_list);
- if (td_list->ed->hwHeadP & m32_swap (0x1)) {
- if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
- td_list->ed->hwHeadP =
- (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & m32_swap (0xfffffff0)) |
- (td_list->ed->hwHeadP & m32_swap (0x2));
- lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
- } else
- td_list->ed->hwHeadP &= m32_swap (0xfffffff2);
- }
-#ifdef CONFIG_MPC5200
- td_list->hwNextTD = 0;
-#endif
- }
-
- td_list->next_dl_td = td_rev;
- td_rev = td_list;
- td_list_hc = m32_swap (td_list->hwNextTD) & 0xfffffff0;
- }
- return td_list;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* td done list */
-static int dl_done_list (ohci_t *ohci, td_t *td_list)
-{
- td_t *td_list_next = NULL;
- ed_t *ed;
- int cc = 0;
- int stat = 0;
- /* urb_t *urb; */
- urb_priv_t *lurb_priv;
- __u32 tdINFO, edHeadP, edTailP;
-
- while (td_list) {
- td_list_next = td_list->next_dl_td;
-
- tdINFO = m32_swap (td_list->hwINFO);
-
- ed = td_list->ed;
- lurb_priv = ed->purb;
-
- dl_transfer_length(td_list);
-
- /* error code of transfer */
- cc = TD_CC_GET (tdINFO);
- if (cc != 0) {
- dbg("ConditionCode %#x", cc);
- stat = cc_to_error[cc];
- }
-
- /* see if this done list makes for all TD's of current URB,
- * and mark the URB finished if so */
- if (++(lurb_priv->td_cnt) == lurb_priv->length) {
-#if 1
- if ((ed->state & (ED_OPER | ED_UNLINK)) &&
- (lurb_priv->state != URB_DEL))
-#else
- if ((ed->state & (ED_OPER | ED_UNLINK)))
-#endif
- lurb_priv->finished = sohci_return_job(ohci,
- lurb_priv);
- else
- dbg("dl_done_list: strange.., ED state %x, ed->state\n");
- } else
- dbg("dl_done_list: processing TD %x, len %x\n", lurb_priv->td_cnt,
- lurb_priv->length);
- if (ed->state != ED_NEW &&
- (usb_pipetype (lurb_priv->pipe) != PIPE_INTERRUPT)) {
- edHeadP = m32_swap (ed->hwHeadP) & 0xfffffff0;
- edTailP = m32_swap (ed->hwTailP);
-
- /* unlink eds if they are not busy */
- if ((edHeadP == edTailP) && (ed->state == ED_OPER))
- ep_unlink (ohci, ed);
- }
-
- td_list = td_list_next;
- }
- return stat;
-}
-
-/*-------------------------------------------------------------------------*
- * Virtual Root Hub
- *-------------------------------------------------------------------------*/
-
-/* Device descriptor */
-static __u8 root_hub_dev_des[] =
-{
- 0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
- 0x10, /* __u16 bcdUSB; v1.1 */
- 0x01,
- 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
- 0x00, /* __u8 bDeviceSubClass; */
- 0x00, /* __u8 bDeviceProtocol; */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
- 0x00, /* __u16 idVendor; */
- 0x00,
- 0x00, /* __u16 idProduct; */
- 0x00,
- 0x00, /* __u16 bcdDevice; */
- 0x00,
- 0x00, /* __u8 iManufacturer; */
- 0x01, /* __u8 iProduct; */
- 0x00, /* __u8 iSerialNumber; */
- 0x01 /* __u8 bNumConfigurations; */
-};
-
-/* Configuration descriptor */
-static __u8 root_hub_config_des[] =
-{
- 0x09, /* __u8 bLength; */
- 0x02, /* __u8 bDescriptorType; Configuration */
- 0x19, /* __u16 wTotalLength; */
- 0x00,
- 0x01, /* __u8 bNumInterfaces; */
- 0x01, /* __u8 bConfigurationValue; */
- 0x00, /* __u8 iConfiguration; */
- 0x40, /* __u8 bmAttributes;
- Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
- 0x00, /* __u8 MaxPower; */
-
- /* interface */
- 0x09, /* __u8 if_bLength; */
- 0x04, /* __u8 if_bDescriptorType; Interface */
- 0x00, /* __u8 if_bInterfaceNumber; */
- 0x00, /* __u8 if_bAlternateSetting; */
- 0x01, /* __u8 if_bNumEndpoints; */
- 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
- 0x00, /* __u8 if_bInterfaceSubClass; */
- 0x00, /* __u8 if_bInterfaceProtocol; */
- 0x00, /* __u8 if_iInterface; */
-
- /* endpoint */
- 0x07, /* __u8 ep_bLength; */
- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
- 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
- 0x00,
- 0xff /* __u8 ep_bInterval; 255 ms */
-};
-
-static unsigned char root_hub_str_index0[] =
-{
- 0x04, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 0x09, /* __u8 lang ID */
- 0x04, /* __u8 lang ID */
-};
-
-static unsigned char root_hub_str_index1[] =
-{
- 28, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 'O', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'H', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'C', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'I', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'R', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 't', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'H', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'u', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'b', /* __u8 Unicode */
- 0, /* __u8 Unicode */
-};
-
-/* Hub class-specific descriptor is constructed dynamically */
-
-/*-------------------------------------------------------------------------*/
-
-#define OK(x) len = (x); break
-#ifdef DEBUG
-#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
-#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
-#else
-#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status)
-#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
-#endif
-#define RD_RH_STAT roothub_status(&gohci)
-#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1)
-
-/* request to virtual root hub */
-
-int rh_check_port_status(ohci_t *controller)
-{
- __u32 temp, ndp, i;
- int res;
-
- res = -1;
- temp = roothub_a (controller);
- ndp = (temp & RH_A_NDP);
-#ifdef CONFIG_AT91C_PQFP_UHPBUG
- ndp = (ndp == 2) ? 1:0;
-#endif
- for (i = 0; i < ndp; i++) {
- temp = roothub_portstatus (controller, i);
- /* check for a device disconnect */
- if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
- (RH_PS_PESC | RH_PS_CSC)) &&
- ((temp & RH_PS_CCS) == 0)) {
- res = i;
- break;
- }
- }
- return res;
-}
-
-static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
- void *buffer, int transfer_len, struct devrequest *cmd)
-{
- void * data = buffer;
- int leni = transfer_len;
- int len = 0;
- int stat = 0;
- __u32 datab[4];
- __u8 *data_buf = (__u8 *)datab;
- __u16 bmRType_bReq;
- __u16 wValue;
- __u16 wIndex;
- __u16 wLength;
-
-#ifdef DEBUG
-pkt_print(NULL, dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
-#else
- wait_ms(1);
-#endif
- if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
- info("Root-Hub submit IRQ: NOT implemented");
- return 0;
- }
-
- bmRType_bReq = cmd->requesttype | (cmd->request << 8);
- wValue = cpu_to_le16 (cmd->value);
- wIndex = cpu_to_le16 (cmd->index);
- wLength = cpu_to_le16 (cmd->length);
-
- info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
- dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
-
- switch (bmRType_bReq) {
- /* Request Destination:
- without flags: Device,
- RH_INTERFACE: interface,
- RH_ENDPOINT: endpoint,
- RH_CLASS means HUB here,
- RH_OTHER | RH_CLASS almost ever means HUB_PORT here
- */
-
- case RH_GET_STATUS:
- *(__u16 *) data_buf = cpu_to_le16 (1); OK (2);
- case RH_GET_STATUS | RH_INTERFACE:
- *(__u16 *) data_buf = cpu_to_le16 (0); OK (2);
- case RH_GET_STATUS | RH_ENDPOINT:
- *(__u16 *) data_buf = cpu_to_le16 (0); OK (2);
- case RH_GET_STATUS | RH_CLASS:
- *(__u32 *) data_buf = cpu_to_le32 (
- RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
- OK (4);
- case RH_GET_STATUS | RH_OTHER | RH_CLASS:
- *(__u32 *) data_buf = cpu_to_le32 (RD_RH_PORTSTAT); OK (4);
-
- case RH_CLEAR_FEATURE | RH_ENDPOINT:
- switch (wValue) {
- case (RH_ENDPOINT_STALL): OK (0);
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_CLASS:
- switch (wValue) {
- case RH_C_HUB_LOCAL_POWER:
- OK(0);
- case (RH_C_HUB_OVER_CURRENT):
- WR_RH_STAT(RH_HS_OCIC); OK (0);
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
- switch (wValue) {
- case (RH_PORT_ENABLE):
- WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
- case (RH_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
- case (RH_PORT_POWER):
- WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
- case (RH_C_PORT_CONNECTION):
- WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
- case (RH_C_PORT_ENABLE):
- WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
- case (RH_C_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
- case (RH_C_PORT_OVER_CURRENT):
- WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
- case (RH_C_PORT_RESET):
- WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
- }
- break;
-
- case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
- switch (wValue) {
- case (RH_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
- case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
- if (RD_RH_PORTSTAT & RH_PS_CCS)
- WR_RH_PORTSTAT (RH_PS_PRS);
- OK (0);
- case (RH_PORT_POWER):
- WR_RH_PORTSTAT (RH_PS_PPS );
- wait_ms(100);
- OK (0);
- case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
- if (RD_RH_PORTSTAT & RH_PS_CCS)
- WR_RH_PORTSTAT (RH_PS_PES );
- OK (0);
- }
- break;
-
- case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
-
- case RH_GET_DESCRIPTOR:
- switch ((wValue & 0xff00) >> 8) {
- case (0x01): /* device descriptor */
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_dev_des),
- wLength));
- data_buf = root_hub_dev_des; OK(len);
- case (0x02): /* configuration descriptor */
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_config_des),
- wLength));
- data_buf = root_hub_config_des; OK(len);
- case (0x03): /* string descriptors */
- if(wValue==0x0300) {
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_str_index0),
- wLength));
- data_buf = root_hub_str_index0;
- OK(len);
- }
- if(wValue==0x0301) {
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_str_index1),
- wLength));
- data_buf = root_hub_str_index1;
- OK(len);
- }
- default:
- stat = USB_ST_STALLED;
- }
- break;
-
- case RH_GET_DESCRIPTOR | RH_CLASS:
- {
- __u32 temp = roothub_a (&gohci);
-
- data_buf [0] = 9; /* min length; */
- data_buf [1] = 0x29;
- data_buf [2] = temp & RH_A_NDP;
-#ifdef CONFIG_AT91C_PQFP_UHPBUG
- data_buf [2] = (data_buf [2] == 2) ? 1:0;
-#endif
- data_buf [3] = 0;
- if (temp & RH_A_PSM) /* per-port power switching? */
- data_buf [3] |= 0x1;
- if (temp & RH_A_NOCP) /* no overcurrent reporting? */
- data_buf [3] |= 0x10;
- else if (temp & RH_A_OCPM) /* per-port overcurrent reporting? */
- data_buf [3] |= 0x8;
-
- /* corresponds to data_buf[4-7] */
- datab [1] = 0;
- data_buf [5] = (temp & RH_A_POTPGT) >> 24;
- temp = roothub_b (&gohci);
- data_buf [7] = temp & RH_B_DR;
- if (data_buf [2] < 7) {
- data_buf [8] = 0xff;
- } else {
- data_buf [0] += 2;
- data_buf [8] = (temp & RH_B_DR) >> 8;
- data_buf [10] = data_buf [9] = 0xff;
- }
-
- len = min_t(unsigned int, leni,
- min_t(unsigned int, data_buf [0], wLength));
- OK (len);
- }
-
- case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1);
-
- case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0);
-
- default:
- dbg ("unsupported root hub command");
- stat = USB_ST_STALLED;
- }
-
-#ifdef DEBUG
- ohci_dump_roothub (&gohci, 1);
-#else
- wait_ms(1);
-#endif
-
- len = min_t(int, len, leni);
- if (data != data_buf)
- memcpy (data, data_buf, len);
- dev->act_len = len;
- dev->status = stat;
-
-#ifdef DEBUG
- pkt_print(NULL, dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
-#else
- wait_ms(1);
-#endif
-
- return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* common code for handling submit messages - used for all but root hub */
-/* accesses. */
-int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, int interval)
-{
- int stat = 0;
- int maxsize = usb_maxpacket(dev, pipe);
- int timeout;
- urb_priv_t *urb;
-
- urb = malloc(sizeof(urb_priv_t));
- memset(urb, 0, sizeof(urb_priv_t));
-
- urb->dev = dev;
- urb->pipe = pipe;
- urb->transfer_buffer = buffer;
- urb->transfer_buffer_length = transfer_len;
- urb->interval = interval;
-
- /* device pulled? Shortcut the action. */
- if (devgone == dev) {
- dev->status = USB_ST_CRC_ERR;
- return 0;
- }
-
-#ifdef DEBUG
- urb->actual_length = 0;
- pkt_print(urb, dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
-#else
- wait_ms(1);
-#endif
- if (!maxsize) {
- err("submit_common_message: pipesize for pipe %lx is zero",
- pipe);
- return -1;
- }
-
- if (sohci_submit_job(urb, setup) < 0) {
- err("sohci_submit_job failed");
- return -1;
- }
-
-#if 0
- wait_ms(10);
- /* ohci_dump_status(&gohci); */
-#endif
-
- /* allow more time for a BULK device to react - some are slow */
-#define BULK_TO 5000 /* timeout in milliseconds */
- if (usb_pipetype (pipe) == PIPE_BULK)
- timeout = BULK_TO;
- else
- timeout = 100;
-
- /* wait for it to complete */
- for (;;) {
- /* check whether the controller is done */
- stat = hc_interrupt();
- if (stat < 0) {
- stat = USB_ST_CRC_ERR;
- break;
- }
-
- /* NOTE: since we are not interrupt driven in U-Boot and always
- * handle only one URB at a time, we cannot assume the
- * transaction finished on the first successful return from
- * hc_interrupt().. unless the flag for current URB is set,
- * meaning that all TD's to/from device got actually
- * transferred and processed. If the current URB is not
- * finished we need to re-iterate this loop so as
- * hc_interrupt() gets called again as there needs to be some
- * more TD's to process still */
- if ((stat >= 0) && (stat != 0xff) && (urb->finished)) {
- /* 0xff is returned for an SF-interrupt */
- break;
- }
-
- if (--timeout) {
- wait_ms(1);
- if (!urb->finished)
- dbg("\%");
-
- } else {
- err("CTL:TIMEOUT ");
- dbg("submit_common_msg: TO status %x\n", stat);
- urb->finished = 1;
- stat = USB_ST_CRC_ERR;
- break;
- }
- }
-
- dev->status = stat;
- dev->act_len = transfer_len;
-
-#ifdef DEBUG
- pkt_print(urb, dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
-#else
- wait_ms(1);
-#endif
-
- /* free TDs in urb_priv */
- if (usb_pipetype (pipe) != PIPE_INTERRUPT)
- urb_free_priv (urb);
- return 0;
-}
-
-/* submit routines called from usb.c */
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len)
-{
- info("submit_bulk_msg");
- return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
-}
-
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup)
-{
- int maxsize = usb_maxpacket(dev, pipe);
-
- info("submit_control_msg");
-#ifdef DEBUG
- pkt_print(NULL, dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
-#else
- wait_ms(1);
-#endif
- if (!maxsize) {
- err("submit_control_message: pipesize for pipe %lx is zero",
- pipe);
- return -1;
- }
- if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
- gohci.rh.dev = dev;
- /* root hub - redirect */
- return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
- setup);
- }
-
- return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
-}
-
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, int interval)
-{
- info("submit_int_msg");
- return submit_common_msg(dev, pipe, buffer, transfer_len, NULL,
- interval);
-}
-
-/*-------------------------------------------------------------------------*
- * HC functions
- *-------------------------------------------------------------------------*/
-
-/* reset the HC and BUS */
-
-static int hc_reset (ohci_t *ohci)
-{
- int timeout = 30;
- int smm_timeout = 50; /* 0,5 sec */
-
- dbg("%s\n", __FUNCTION__);
-
- if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
- writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
- info("USB HC TakeOver from SMM");
- while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
- wait_ms (10);
- if (--smm_timeout == 0) {
- err("USB HC TakeOver failed!");
- return -1;
- }
- }
- }
-
- /* Disable HC interrupts */
- writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
-
- dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;\n",
- ohci->slot_name,
- readl(&ohci->regs->control));
-
- /* Reset USB (needed by some controllers) */
- ohci->hc_control = 0;
- writel (ohci->hc_control, &ohci->regs->control);
-
- /* HC Reset requires max 10 us delay */
- writel (OHCI_HCR, &ohci->regs->cmdstatus);
- while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
- if (--timeout == 0) {
- err("USB HC reset timed out!");
- return -1;
- }
- udelay (1);
- }
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Start an OHCI controller, set the BUS operational
- * enable interrupts
- * connect the virtual root hub */
-
-static int hc_start (ohci_t * ohci)
-{
- __u32 mask;
- unsigned int fminterval;
-
- ohci->disabled = 1;
-
- /* Tell the controller where the control and bulk lists are
- * The lists are empty now. */
-
- writel (0, &ohci->regs->ed_controlhead);
- writel (0, &ohci->regs->ed_bulkhead);
-
- writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
-
- fminterval = 0x2edf;
- writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
- fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
- writel (fminterval, &ohci->regs->fminterval);
- writel (0x628, &ohci->regs->lsthresh);
-
- /* start controller operations */
- ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
- ohci->disabled = 0;
- writel (ohci->hc_control, &ohci->regs->control);
-
- /* disable all interrupts */
- mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
- OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
- OHCI_INTR_OC | OHCI_INTR_MIE);
- writel (mask, &ohci->regs->intrdisable);
- /* clear all interrupts */
- mask &= ~OHCI_INTR_MIE;
- writel (mask, &ohci->regs->intrstatus);
- /* Choose the interrupts we care about now - but w/o MIE */
- mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
- writel (mask, &ohci->regs->intrenable);
-
-#ifdef OHCI_USE_NPS
- /* required for AMD-756 and some Mac platforms */
- writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
- &ohci->regs->roothub.a);
- writel (RH_HS_LPSC, &ohci->regs->roothub.status);
-#endif /* OHCI_USE_NPS */
-
-#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
- /* POTPGT delay is bits 24-31, in 2 ms units. */
- mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
-
- /* connect the virtual root hub */
- ohci->rh.devnum = 0;
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Poll USB interrupt. */
-void usb_event_poll(void)
-{
- hc_interrupt();
-}
-
-/* an interrupt happens */
-
-static int hc_interrupt (void)
-{
- ohci_t *ohci = &gohci;
- struct ohci_regs *regs = ohci->regs;
- int ints;
- int stat = -1;
-
- if ((ohci->hcca->done_head != 0) &&
- !(m32_swap (ohci->hcca->done_head) & 0x01)) {
- ints = OHCI_INTR_WDH;
- } else if ((ints = readl (®s->intrstatus)) == ~(u32)0) {
- ohci->disabled++;
- err ("%s device removed!", ohci->slot_name);
- return -1;
- } else if ((ints &= readl (®s->intrenable)) == 0) {
- dbg("hc_interrupt: returning..\n");
- return 0xff;
- }
-
- /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
-
- if (ints & OHCI_INTR_RHSC) {
- got_rhsc = 1;
- stat = 0xff;
- }
-
- if (ints & OHCI_INTR_UE) {
- ohci->disabled++;
- err ("OHCI Unrecoverable Error, controller usb-%s disabled",
- ohci->slot_name);
- /* e.g. due to PCI Master/Target Abort */
-
-#ifdef DEBUG
- ohci_dump (ohci, 1);
-#else
- wait_ms(1);
-#endif
- /* FIXME: be optimistic, hope that bug won't repeat often. */
- /* Make some non-interrupt context restart the controller. */
- /* Count and limit the retries though; either hardware or */
- /* software errors can go forever... */
- hc_reset (ohci);
- return -1;
- }
-
- if (ints & OHCI_INTR_WDH) {
- wait_ms(1);
- writel (OHCI_INTR_WDH, ®s->intrdisable);
- (void)readl (®s->intrdisable); /* flush */
- stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
- writel (OHCI_INTR_WDH, ®s->intrenable);
- (void)readl (®s->intrdisable); /* flush */
- }
-
- if (ints & OHCI_INTR_SO) {
- dbg("USB Schedule overrun\n");
- writel (OHCI_INTR_SO, ®s->intrenable);
- stat = -1;
- }
-
- /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
- if (ints & OHCI_INTR_SF) {
- unsigned int frame = m16_swap (ohci->hcca->frame_no) & 1;
- wait_ms(1);
- writel (OHCI_INTR_SF, ®s->intrdisable);
- if (ohci->ed_rm_list[frame] != NULL)
- writel (OHCI_INTR_SF, ®s->intrenable);
- stat = 0xff;
- }
-
- writel (ints, ®s->intrstatus);
- return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*-------------------------------------------------------------------------*/
-
-/* De-allocate all resources.. */
-
-static void hc_release_ohci (ohci_t *ohci)
-{
- dbg ("USB HC release ohci usb-%s", ohci->slot_name);
-
- if (!ohci->disabled)
- hc_reset (ohci);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * low level initalisation routine, called from usb.c
- */
-static char ohci_inited = 0;
-
-int usb_lowlevel_init(void)
-{
-#ifdef CONFIG_PCI_OHCI
- pci_dev_t pdev;
-#endif
-
-#ifdef CFG_USB_OHCI_CPU_INIT
- /* cpu dependant init */
- if(usb_cpu_init())
- return -1;
-#endif
-
-#ifdef CFG_USB_OHCI_BOARD_INIT
- /* board dependant init */
- if(usb_board_init())
- return -1;
-#endif
- memset (&gohci, 0, sizeof (ohci_t));
-
- /* align the storage */
- if ((__u32)&ghcca[0] & 0xff) {
- err("HCCA not aligned!!");
- return -1;
- }
- phcca = &ghcca[0];
- info("aligned ghcca %p", phcca);
- memset(&ohci_dev, 0, sizeof(struct ohci_device));
- if ((__u32)&ohci_dev.ed[0] & 0x7) {
- err("EDs not aligned!!");
- return -1;
- }
- memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
- if ((__u32)gtd & 0x7) {
- err("TDs not aligned!!");
- return -1;
- }
- ptd = gtd;
- gohci.hcca = phcca;
- memset (phcca, 0, sizeof (struct ohci_hcca));
-
- gohci.disabled = 1;
- gohci.sleeping = 0;
- gohci.irq = -1;
-#ifdef CONFIG_PCI_OHCI
- pdev = pci_find_devices(ohci_pci_ids, 0);
-
- if (pdev != -1) {
- u16 vid, did;
- u32 base;
- pci_read_config_word(pdev, PCI_VENDOR_ID, &vid);
- pci_read_config_word(pdev, PCI_DEVICE_ID, &did);
- printf("OHCI pci controller (%04x, %04x) found @(%d:%d:%d)\n",
- vid, did, (pdev >> 16) & 0xff,
- (pdev >> 11) & 0x1f, (pdev >> 8) & 0x7);
- pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base);
- printf("OHCI regs address 0x%08x\n", base);
- gohci.regs = (struct ohci_regs *)base;
- } else
- return -1;
-#else
- gohci.regs = (struct ohci_regs *)CFG_USB_OHCI_REGS_BASE;
-#endif
-
- gohci.flags = 0;
- gohci.slot_name = CFG_USB_OHCI_SLOT_NAME;
-
- if (hc_reset (&gohci) < 0) {
- hc_release_ohci (&gohci);
- err ("can't reset usb-%s", gohci.slot_name);
-#ifdef CFG_USB_OHCI_BOARD_INIT
- /* board dependant cleanup */
- usb_board_init_fail();
-#endif
-
-#ifdef CFG_USB_OHCI_CPU_INIT
- /* cpu dependant cleanup */
- usb_cpu_init_fail();
-#endif
- return -1;
- }
-
- /* FIXME this is a second HC reset; why?? */
- /* writel(gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control);
- wait_ms(10); */
- if (hc_start (&gohci) < 0) {
- err ("can't start usb-%s", gohci.slot_name);
- hc_release_ohci (&gohci);
- /* Initialization failed */
-#ifdef CFG_USB_OHCI_BOARD_INIT
- /* board dependant cleanup */
- usb_board_stop();
-#endif
-
-#ifdef CFG_USB_OHCI_CPU_INIT
- /* cpu dependant cleanup */
- usb_cpu_stop();
-#endif
- return -1;
- }
-
-#ifdef DEBUG
- ohci_dump (&gohci, 1);
-#else
- wait_ms(1);
-#endif
- ohci_inited = 1;
- return 0;
-}
-
-int usb_lowlevel_stop(void)
-{
- /* this gets called really early - before the controller has */
- /* even been initialized! */
- if (!ohci_inited)
- return 0;
- /* TODO release any interrupts, etc. */
- /* call hc_release_ohci() here ? */
- hc_reset (&gohci);
-
-#ifdef CFG_USB_OHCI_BOARD_INIT
- /* board dependant cleanup */
- if(usb_board_stop())
- return -1;
-#endif
-
-#ifdef CFG_USB_OHCI_CPU_INIT
- /* cpu dependant cleanup */
- if(usb_cpu_stop())
- return -1;
-#endif
-
- return 0;
-}
-#endif /* CONFIG_USB_OHCI_NEW */
+++ /dev/null
-/*
- * URB OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
- *
- * usb-ohci.h
- */
-
-/* functions for doing board or CPU specific setup/cleanup */
-extern int usb_board_init(void);
-extern int usb_board_stop(void);
-extern int usb_board_init_fail(void);
-
-extern int usb_cpu_init(void);
-extern int usb_cpu_stop(void);
-extern int usb_cpu_init_fail(void);
-
-
-static int cc_to_error[16] = {
-
-/* mapping of the OHCI CC status to error codes */
- /* No Error */ 0,
- /* CRC Error */ USB_ST_CRC_ERR,
- /* Bit Stuff */ USB_ST_BIT_ERR,
- /* Data Togg */ USB_ST_CRC_ERR,
- /* Stall */ USB_ST_STALLED,
- /* DevNotResp */ -1,
- /* PIDCheck */ USB_ST_BIT_ERR,
- /* UnExpPID */ USB_ST_BIT_ERR,
- /* DataOver */ USB_ST_BUF_ERR,
- /* DataUnder */ USB_ST_BUF_ERR,
- /* reservd */ -1,
- /* reservd */ -1,
- /* BufferOver */ USB_ST_BUF_ERR,
- /* BuffUnder */ USB_ST_BUF_ERR,
- /* Not Access */ -1,
- /* Not Access */ -1
-};
-
-/* ED States */
-
-#define ED_NEW 0x00
-#define ED_UNLINK 0x01
-#define ED_OPER 0x02
-#define ED_DEL 0x04
-#define ED_URB_DEL 0x08
-
-/* usb_ohci_ed */
-struct ed {
- __u32 hwINFO;
- __u32 hwTailP;
- __u32 hwHeadP;
- __u32 hwNextED;
-
- struct ed *ed_prev;
- __u8 int_period;
- __u8 int_branch;
- __u8 int_load;
- __u8 int_interval;
- __u8 state;
- __u8 type;
- __u16 last_iso;
- struct ed *ed_rm_list;
-
- struct usb_device *usb_dev;
- void *purb;
- __u32 unused[2];
-} __attribute((aligned(16)));
-typedef struct ed ed_t;
-
-
-/* TD info field */
-#define TD_CC 0xf0000000
-#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
-#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
-#define TD_EC 0x0C000000
-#define TD_T 0x03000000
-#define TD_T_DATA0 0x02000000
-#define TD_T_DATA1 0x03000000
-#define TD_T_TOGGLE 0x00000000
-#define TD_R 0x00040000
-#define TD_DI 0x00E00000
-#define TD_DI_SET(X) (((X) & 0x07)<< 21)
-#define TD_DP 0x00180000
-#define TD_DP_SETUP 0x00000000
-#define TD_DP_IN 0x00100000
-#define TD_DP_OUT 0x00080000
-
-#define TD_ISO 0x00010000
-#define TD_DEL 0x00020000
-
-/* CC Codes */
-#define TD_CC_NOERROR 0x00
-#define TD_CC_CRC 0x01
-#define TD_CC_BITSTUFFING 0x02
-#define TD_CC_DATATOGGLEM 0x03
-#define TD_CC_STALL 0x04
-#define TD_DEVNOTRESP 0x05
-#define TD_PIDCHECKFAIL 0x06
-#define TD_UNEXPECTEDPID 0x07
-#define TD_DATAOVERRUN 0x08
-#define TD_DATAUNDERRUN 0x09
-#define TD_BUFFEROVERRUN 0x0C
-#define TD_BUFFERUNDERRUN 0x0D
-#define TD_NOTACCESSED 0x0F
-
-
-#define MAXPSW 1
-
-struct td {
- __u32 hwINFO;
- __u32 hwCBP; /* Current Buffer Pointer */
- __u32 hwNextTD; /* Next TD Pointer */
- __u32 hwBE; /* Memory Buffer End Pointer */
-
-/* #ifndef CONFIG_MPC5200 /\* this seems wrong *\/ */
- __u16 hwPSW[MAXPSW];
-/* #endif */
- __u8 unused;
- __u8 index;
- struct ed *ed;
- struct td *next_dl_td;
- struct usb_device *usb_dev;
- int transfer_len;
- __u32 data;
-
- __u32 unused2[2];
-} __attribute((aligned(32)));
-typedef struct td td_t;
-
-#define OHCI_ED_SKIP (1 << 14)
-
-/*
- * The HCCA (Host Controller Communications Area) is a 256 byte
- * structure defined in the OHCI spec. that the host controller is
- * told the base address of. It must be 256-byte aligned.
- */
-
-#define NUM_INTS 32 /* part of the OHCI standard */
-struct ohci_hcca {
- __u32 int_table[NUM_INTS]; /* Interrupt ED table */
-#if defined(CONFIG_MPC5200)
- __u16 pad1; /* set to 0 on each frame_no change */
- __u16 frame_no; /* current frame number */
-#else
- __u16 frame_no; /* current frame number */
- __u16 pad1; /* set to 0 on each frame_no change */
-#endif
- __u32 done_head; /* info returned for an interrupt */
- u8 reserved_for_hc[116];
-} __attribute((aligned(256)));
-
-
-/*
- * Maximum number of root hub ports.
- */
-#ifndef CFG_USB_OHCI_MAX_ROOT_PORTS
-# error "CFG_USB_OHCI_MAX_ROOT_PORTS undefined!"
-#endif
-
-/*
- * This is the structure of the OHCI controller's memory mapped I/O
- * region. This is Memory Mapped I/O. You must use the readl() and
- * writel() macros defined in asm/io.h to access these!!
- */
-struct ohci_regs {
- /* control and status registers */
- __u32 revision;
- __u32 control;
- __u32 cmdstatus;
- __u32 intrstatus;
- __u32 intrenable;
- __u32 intrdisable;
- /* memory pointers */
- __u32 hcca;
- __u32 ed_periodcurrent;
- __u32 ed_controlhead;
- __u32 ed_controlcurrent;
- __u32 ed_bulkhead;
- __u32 ed_bulkcurrent;
- __u32 donehead;
- /* frame counters */
- __u32 fminterval;
- __u32 fmremaining;
- __u32 fmnumber;
- __u32 periodicstart;
- __u32 lsthresh;
- /* Root hub ports */
- struct ohci_roothub_regs {
- __u32 a;
- __u32 b;
- __u32 status;
- __u32 portstatus[CFG_USB_OHCI_MAX_ROOT_PORTS];
- } roothub;
-} __attribute((aligned(32)));
-
-
-/* OHCI CONTROL AND STATUS REGISTER MASKS */
-
-/*
- * HcControl (control) register masks
- */
-#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */
-#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */
-#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */
-#define OHCI_CTRL_CLE (1 << 4) /* control list enable */
-#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */
-#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */
-#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
-#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
-#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */
-
-/* pre-shifted values for HCFS */
-# define OHCI_USB_RESET (0 << 6)
-# define OHCI_USB_RESUME (1 << 6)
-# define OHCI_USB_OPER (2 << 6)
-# define OHCI_USB_SUSPEND (3 << 6)
-
-/*
- * HcCommandStatus (cmdstatus) register masks
- */
-#define OHCI_HCR (1 << 0) /* host controller reset */
-#define OHCI_CLF (1 << 1) /* control list filled */
-#define OHCI_BLF (1 << 2) /* bulk list filled */
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_SOC (3 << 16) /* scheduling overrun count */
-
-/*
- * masks used with interrupt registers:
- * HcInterruptStatus (intrstatus)
- * HcInterruptEnable (intrenable)
- * HcInterruptDisable (intrdisable)
- */
-#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */
-#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */
-#define OHCI_INTR_SF (1 << 2) /* start frame */
-#define OHCI_INTR_RD (1 << 3) /* resume detect */
-#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */
-#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */
-#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */
-#define OHCI_INTR_OC (1 << 30) /* ownership change */
-#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */
-
-
-/* Virtual Root HUB */
-struct virt_root_hub {
- int devnum; /* Address of Root Hub endpoint */
- void *dev; /* was urb */
- void *int_addr;
- int send;
- int interval;
-};
-
-/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
-
-/* destination of request */
-#define RH_INTERFACE 0x01
-#define RH_ENDPOINT 0x02
-#define RH_OTHER 0x03
-
-#define RH_CLASS 0x20
-#define RH_VENDOR 0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS 0x0080
-#define RH_CLEAR_FEATURE 0x0100
-#define RH_SET_FEATURE 0x0300
-#define RH_SET_ADDRESS 0x0500
-#define RH_GET_DESCRIPTOR 0x0680
-#define RH_SET_DESCRIPTOR 0x0700
-#define RH_GET_CONFIGURATION 0x0880
-#define RH_SET_CONFIGURATION 0x0900
-#define RH_GET_STATE 0x0280
-#define RH_GET_INTERFACE 0x0A80
-#define RH_SET_INTERFACE 0x0B00
-#define RH_SYNC_FRAME 0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP 0x2000
-
-
-/* Hub port features */
-#define RH_PORT_CONNECTION 0x00
-#define RH_PORT_ENABLE 0x01
-#define RH_PORT_SUSPEND 0x02
-#define RH_PORT_OVER_CURRENT 0x03
-#define RH_PORT_RESET 0x04
-#define RH_PORT_POWER 0x08
-#define RH_PORT_LOW_SPEED 0x09
-
-#define RH_C_PORT_CONNECTION 0x10
-#define RH_C_PORT_ENABLE 0x11
-#define RH_C_PORT_SUSPEND 0x12
-#define RH_C_PORT_OVER_CURRENT 0x13
-#define RH_C_PORT_RESET 0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER 0x00
-#define RH_C_HUB_OVER_CURRENT 0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL 0x01
-
-#define RH_ACK 0x01
-#define RH_REQ_ERR -1
-#define RH_NACK 0x00
-
-
-/* OHCI ROOT HUB REGISTER MASKS */
-
-/* roothub.portstatus [i] bits */
-#define RH_PS_CCS 0x00000001 /* current connect status */
-#define RH_PS_PES 0x00000002 /* port enable status*/
-#define RH_PS_PSS 0x00000004 /* port suspend status */
-#define RH_PS_POCI 0x00000008 /* port over current indicator */
-#define RH_PS_PRS 0x00000010 /* port reset status */
-#define RH_PS_PPS 0x00000100 /* port power status */
-#define RH_PS_LSDA 0x00000200 /* low speed device attached */
-#define RH_PS_CSC 0x00010000 /* connect status change */
-#define RH_PS_PESC 0x00020000 /* port enable status change */
-#define RH_PS_PSSC 0x00040000 /* port suspend status change */
-#define RH_PS_OCIC 0x00080000 /* over current indicator change */
-#define RH_PS_PRSC 0x00100000 /* port reset status change */
-
-/* roothub.status bits */
-#define RH_HS_LPS 0x00000001 /* local power status */
-#define RH_HS_OCI 0x00000002 /* over current indicator */
-#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
-#define RH_HS_LPSC 0x00010000 /* local power status change */
-#define RH_HS_OCIC 0x00020000 /* over current indicator change */
-#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
-
-/* roothub.b masks */
-#define RH_B_DR 0x0000ffff /* device removable flags */
-#define RH_B_PPCM 0xffff0000 /* port power control mask */
-
-/* roothub.a masks */
-#define RH_A_NDP (0xff << 0) /* number of downstream ports */
-#define RH_A_PSM (1 << 8) /* power switching mode */
-#define RH_A_NPS (1 << 9) /* no power switching */
-#define RH_A_DT (1 << 10) /* device type (mbz) */
-#define RH_A_OCPM (1 << 11) /* over current protection mode */
-#define RH_A_NOCP (1 << 12) /* no over current protection */
-#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
-
-/* urb */
-#define N_URB_TD 48
-typedef struct
-{
- ed_t *ed;
- __u16 length; /* number of tds associated with this request */
- __u16 td_cnt; /* number of tds already serviced */
- struct usb_device *dev;
- int state;
- unsigned long pipe;
- void *transfer_buffer;
- int transfer_buffer_length;
- int interval;
- int actual_length;
- int finished;
- td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */
-} urb_priv_t;
-#define URB_DEL 1
-
-/*
- * This is the full ohci controller description
- *
- * Note how the "proper" USB information is just
- * a subset of what the full implementation needs. (Linus)
- */
-
-
-typedef struct ohci {
- struct ohci_hcca *hcca; /* hcca */
- /*dma_addr_t hcca_dma;*/
-
- int irq;
- int disabled; /* e.g. got a UE, we're hung */
- int sleeping;
- unsigned long flags; /* for HC bugs */
-
- struct ohci_regs *regs; /* OHCI controller's memory */
-
- int ohci_int_load[32]; /* load of the 32 Interrupt Chains (for load balancing)*/
- ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */
- ed_t *ed_bulktail; /* last endpoint of bulk list */
- ed_t *ed_controltail; /* last endpoint of control list */
- int intrstatus;
- __u32 hc_control; /* copy of the hc control reg */
- struct usb_device *dev[32];
- struct virt_root_hub rh;
-
- const char *slot_name;
-} ohci_t;
-
-#define NUM_EDS 8 /* num of preallocated endpoint descriptors */
-
-struct ohci_device {
- ed_t ed[NUM_EDS];
- int ed_cnt;
-};
-
-/* hcd */
-/* endpoint */
-static int ep_link(ohci_t * ohci, ed_t * ed);
-static int ep_unlink(ohci_t * ohci, ed_t * ed);
-static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe,
- int interval, int load);
-
-/*-------------------------------------------------------------------------*/
-
-/* we need more TDs than EDs */
-#define NUM_TD 64
-
-/* +1 so we can align the storage */
-td_t gtd[NUM_TD+1];
-/* pointers to aligned storage */
-td_t *ptd;
-
-/* TDs ... */
-static inline struct td *
-td_alloc (struct usb_device *usb_dev)
-{
- int i;
- struct td *td;
-
- td = NULL;
- for (i = 0; i < NUM_TD; i++)
- {
- if (ptd[i].usb_dev == NULL)
- {
- td = &ptd[i];
- td->usb_dev = usb_dev;
- break;
- }
- }
-
- return td;
-}
-
-static inline void
-ed_free (struct ed *ed)
-{
- ed->usb_dev = NULL;
-}
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Gerry Hamel, geh@ti.com, Texas Instruments
- *
- * Based on
- * linux/drivers/usbd/usbd.c.c - USB Device Core Layer
- *
- * Copyright (c) 2000, 2001, 2002 Lineo
- * Copyright (c) 2001 Hewlett Packard
- *
- * By:
- * Stuart Lynne <sl@lineo.com>,
- * Tom Rushworth <tbr@lineo.com>,
- * Bruce Balden <balden@lineo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <malloc.h>
-#include "usbdcore.h"
-
-#define MAX_INTERFACES 2
-
-
-int maxstrings = 20;
-
-/* Global variables ************************************************************************** */
-
-struct usb_string_descriptor **usb_strings;
-
-int usb_devices;
-
-extern struct usb_function_driver ep0_driver;
-
-int registered_functions;
-int registered_devices;
-
-char *usbd_device_events[] = {
- "DEVICE_UNKNOWN",
- "DEVICE_INIT",
- "DEVICE_CREATE",
- "DEVICE_HUB_CONFIGURED",
- "DEVICE_RESET",
- "DEVICE_ADDRESS_ASSIGNED",
- "DEVICE_CONFIGURED",
- "DEVICE_SET_INTERFACE",
- "DEVICE_SET_FEATURE",
- "DEVICE_CLEAR_FEATURE",
- "DEVICE_DE_CONFIGURED",
- "DEVICE_BUS_INACTIVE",
- "DEVICE_BUS_ACTIVITY",
- "DEVICE_POWER_INTERRUPTION",
- "DEVICE_HUB_RESET",
- "DEVICE_DESTROY",
- "DEVICE_FUNCTION_PRIVATE",
-};
-
-char *usbd_device_states[] = {
- "STATE_INIT",
- "STATE_CREATED",
- "STATE_ATTACHED",
- "STATE_POWERED",
- "STATE_DEFAULT",
- "STATE_ADDRESSED",
- "STATE_CONFIGURED",
- "STATE_UNKNOWN",
-};
-
-char *usbd_device_requests[] = {
- "GET STATUS", /* 0 */
- "CLEAR FEATURE", /* 1 */
- "RESERVED", /* 2 */
- "SET FEATURE", /* 3 */
- "RESERVED", /* 4 */
- "SET ADDRESS", /* 5 */
- "GET DESCRIPTOR", /* 6 */
- "SET DESCRIPTOR", /* 7 */
- "GET CONFIGURATION", /* 8 */
- "SET CONFIGURATION", /* 9 */
- "GET INTERFACE", /* 10 */
- "SET INTERFACE", /* 11 */
- "SYNC FRAME", /* 12 */
-};
-
-char *usbd_device_descriptors[] = {
- "UNKNOWN", /* 0 */
- "DEVICE", /* 1 */
- "CONFIG", /* 2 */
- "STRING", /* 3 */
- "INTERFACE", /* 4 */
- "ENDPOINT", /* 5 */
- "DEVICE QUALIFIER", /* 6 */
- "OTHER SPEED", /* 7 */
- "INTERFACE POWER", /* 8 */
-};
-
-char *usbd_device_status[] = {
- "USBD_OPENING",
- "USBD_OK",
- "USBD_SUSPENDED",
- "USBD_CLOSING",
-};
-
-
-/* Descriptor support functions ************************************************************** */
-
-
-/**
- * usbd_get_string - find and return a string descriptor
- * @index: string index to return
- *
- * Find an indexed string and return a pointer to a it.
- */
-struct usb_string_descriptor *usbd_get_string (__u8 index)
-{
- if (index >= maxstrings) {
- return NULL;
- }
- return usb_strings[index];
-}
-
-
-/* Access to device descriptor functions ***************************************************** */
-
-
-/* *
- * usbd_device_configuration_instance - find a configuration instance for this device
- * @device:
- * @configuration: index to configuration, 0 - N-1
- *
- * Get specifed device configuration. Index should be bConfigurationValue-1.
- */
-static struct usb_configuration_instance *usbd_device_configuration_instance (struct usb_device_instance *device,
- unsigned int port, unsigned int configuration)
-{
- /* XXX */
- configuration = configuration ? configuration - 1 : 0;
-
- if (configuration >= device->configurations) {
- return NULL;
- }
- return device->configuration_instance_array + configuration;
-}
-
-
-/* *
- * usbd_device_interface_instance
- * @device:
- * @configuration: index to configuration, 0 - N-1
- * @interface: index to interface
- *
- * Return the specified interface descriptor for the specified device.
- */
-struct usb_interface_instance *usbd_device_interface_instance (struct usb_device_instance *device, int port, int configuration, int interface)
-{
- struct usb_configuration_instance *configuration_instance;
-
- if ((configuration_instance = usbd_device_configuration_instance (device, port, configuration)) == NULL) {
- return NULL;
- }
- if (interface >= configuration_instance->interfaces) {
- return NULL;
- }
- return configuration_instance->interface_instance_array + interface;
-}
-
-/* *
- * usbd_device_alternate_descriptor_list
- * @device:
- * @configuration: index to configuration, 0 - N-1
- * @interface: index to interface
- * @alternate: alternate setting
- *
- * Return the specified alternate descriptor for the specified device.
- */
-struct usb_alternate_instance *usbd_device_alternate_instance (struct usb_device_instance *device, int port, int configuration, int interface, int alternate)
-{
- struct usb_interface_instance *interface_instance;
-
- if ((interface_instance = usbd_device_interface_instance (device, port, configuration, interface)) == NULL) {
- return NULL;
- }
-
- if (alternate >= interface_instance->alternates) {
- return NULL;
- }
-
- return interface_instance->alternates_instance_array + alternate;
-}
-
-
-/* *
- * usbd_device_device_descriptor
- * @device: which device
- * @configuration: index to configuration, 0 - N-1
- * @port: which port
- *
- * Return the specified configuration descriptor for the specified device.
- */
-struct usb_device_descriptor *usbd_device_device_descriptor (struct usb_device_instance *device, int port)
-{
- return (device->device_descriptor);
-}
-
-
-/**
- * usbd_device_configuration_descriptor
- * @device: which device
- * @port: which port
- * @configuration: index to configuration, 0 - N-1
- *
- * Return the specified configuration descriptor for the specified device.
- */
-struct usb_configuration_descriptor *usbd_device_configuration_descriptor (struct
- usb_device_instance
- *device, int port, int configuration)
-{
- struct usb_configuration_instance *configuration_instance;
- if (!(configuration_instance = usbd_device_configuration_instance (device, port, configuration))) {
- return NULL;
- }
- return (configuration_instance->configuration_descriptor);
-}
-
-
-/**
- * usbd_device_interface_descriptor
- * @device: which device
- * @port: which port
- * @configuration: index to configuration, 0 - N-1
- * @interface: index to interface
- * @alternate: alternate setting
- *
- * Return the specified interface descriptor for the specified device.
- */
-struct usb_interface_descriptor *usbd_device_interface_descriptor (struct usb_device_instance
- *device, int port, int configuration, int interface, int alternate)
-{
- struct usb_interface_instance *interface_instance;
- if (!(interface_instance = usbd_device_interface_instance (device, port, configuration, interface))) {
- return NULL;
- }
- if ((alternate < 0) || (alternate >= interface_instance->alternates)) {
- return NULL;
- }
- return (interface_instance->alternates_instance_array[alternate].interface_descriptor);
-}
-
-/**
- * usbd_device_endpoint_descriptor_index
- * @device: which device
- * @port: which port
- * @configuration: index to configuration, 0 - N-1
- * @interface: index to interface
- * @alternate: index setting
- * @index: which index
- *
- * Return the specified endpoint descriptor for the specified device.
- */
-struct usb_endpoint_descriptor *usbd_device_endpoint_descriptor_index (struct usb_device_instance
- *device, int port, int configuration, int interface, int alternate, int index)
-{
- struct usb_alternate_instance *alternate_instance;
-
- if (!(alternate_instance = usbd_device_alternate_instance (device, port, configuration, interface, alternate))) {
- return NULL;
- }
- if (index >= alternate_instance->endpoints) {
- return NULL;
- }
- return *(alternate_instance->endpoints_descriptor_array + index);
-}
-
-
-/**
- * usbd_device_endpoint_transfersize
- * @device: which device
- * @port: which port
- * @configuration: index to configuration, 0 - N-1
- * @interface: index to interface
- * @index: which index
- *
- * Return the specified endpoint transfer size;
- */
-int usbd_device_endpoint_transfersize (struct usb_device_instance *device, int port, int configuration, int interface, int alternate, int index)
-{
- struct usb_alternate_instance *alternate_instance;
-
- if (!(alternate_instance = usbd_device_alternate_instance (device, port, configuration, interface, alternate))) {
- return 0;
- }
- if (index >= alternate_instance->endpoints) {
- return 0;
- }
- return *(alternate_instance->endpoint_transfersize_array + index);
-}
-
-
-/**
- * usbd_device_endpoint_descriptor
- * @device: which device
- * @port: which port
- * @configuration: index to configuration, 0 - N-1
- * @interface: index to interface
- * @alternate: alternate setting
- * @endpoint: which endpoint
- *
- * Return the specified endpoint descriptor for the specified device.
- */
-struct usb_endpoint_descriptor *usbd_device_endpoint_descriptor (struct usb_device_instance *device, int port, int configuration, int interface, int alternate, int endpoint)
-{
- struct usb_endpoint_descriptor *endpoint_descriptor;
- int i;
-
- for (i = 0; !(endpoint_descriptor = usbd_device_endpoint_descriptor_index (device, port, configuration, interface, alternate, i)); i++) {
- if (endpoint_descriptor->bEndpointAddress == endpoint) {
- return endpoint_descriptor;
- }
- }
- return NULL;
-}
-
-/**
- * usbd_endpoint_halted
- * @device: point to struct usb_device_instance
- * @endpoint: endpoint to check
- *
- * Return non-zero if endpoint is halted.
- */
-int usbd_endpoint_halted (struct usb_device_instance *device, int endpoint)
-{
- return (device->status == USB_STATUS_HALT);
-}
-
-
-/**
- * usbd_rcv_complete - complete a receive
- * @endpoint:
- * @len:
- * @urb_bad:
- *
- * Called from rcv interrupt to complete.
- */
-void usbd_rcv_complete(struct usb_endpoint_instance *endpoint, int len, int urb_bad)
-{
- if (endpoint) {
- struct urb *rcv_urb;
-
- /*usbdbg("len: %d urb: %p\n", len, endpoint->rcv_urb); */
-
- /* if we had an urb then update actual_length, dispatch if neccessary */
- if ((rcv_urb = endpoint->rcv_urb)) {
-
- /*usbdbg("actual: %d buffer: %d\n", */
- /*rcv_urb->actual_length, rcv_urb->buffer_length); */
-
- /* check the urb is ok, are we adding data less than the packetsize */
- if (!urb_bad && (len <= endpoint->rcv_packetSize)) {
- /*usbdbg("updating actual_length by %d\n",len); */
-
- /* increment the received data size */
- rcv_urb->actual_length += len;
-
- } else {
- usberr(" RECV_ERROR actual: %d buffer: %d urb_bad: %d\n",
- rcv_urb->actual_length, rcv_urb->buffer_length, urb_bad);
-
- rcv_urb->actual_length = 0;
- rcv_urb->status = RECV_ERROR;
- }
- } else {
- usberr("no rcv_urb!");
- }
- } else {
- usberr("no endpoint!");
- }
-
-}
-
-/**
- * usbd_tx_complete - complete a transmit
- * @endpoint:
- * @resetart:
- *
- * Called from tx interrupt to complete.
- */
-void usbd_tx_complete (struct usb_endpoint_instance *endpoint)
-{
- if (endpoint) {
- struct urb *tx_urb;
-
- /* if we have a tx_urb advance or reset, finish if complete */
- if ((tx_urb = endpoint->tx_urb)) {
- int sent = endpoint->last;
- endpoint->sent += sent;
- endpoint->last -= sent;
-
- if( (endpoint->tx_urb->actual_length - endpoint->sent) <= 0 ) {
- tx_urb->actual_length = 0;
- endpoint->sent = 0;
- endpoint->last = 0;
-
- /* Remove from active, save for re-use */
- urb_detach(tx_urb);
- urb_append(&endpoint->done, tx_urb);
- /*usbdbg("done->next %p, tx_urb %p, done %p", */
- /* endpoint->done.next, tx_urb, &endpoint->done); */
-
- endpoint->tx_urb = first_urb_detached(&endpoint->tx);
- if( endpoint->tx_urb ) {
- endpoint->tx_queue--;
- usbdbg("got urb from tx list");
- }
- if( !endpoint->tx_urb ) {
- /*usbdbg("taking urb from done list"); */
- endpoint->tx_urb = first_urb_detached(&endpoint->done);
- }
- if( !endpoint->tx_urb ) {
- usbdbg("allocating new urb for tx_urb");
- endpoint->tx_urb = usbd_alloc_urb(tx_urb->device, endpoint);
- }
- }
- }
- }
-}
-
-/* URB linked list functions ***************************************************** */
-
-/*
- * Initialize an urb_link to be a single element list.
- * If the urb_link is being used as a distinguished list head
- * the list is empty when the head is the only link in the list.
- */
-void urb_link_init (urb_link * ul)
-{
- if (ul) {
- ul->prev = ul->next = ul;
- }
-}
-
-/*
- * Detach an urb_link from a list, and set it
- * up as a single element list, so no dangling
- * pointers can be followed, and so it can be
- * joined to another list if so desired.
- */
-void urb_detach (struct urb *urb)
-{
- if (urb) {
- urb_link *ul = &urb->link;
- ul->next->prev = ul->prev;
- ul->prev->next = ul->next;
- urb_link_init (ul);
- }
-}
-
-/*
- * Return the first urb_link in a list with a distinguished
- * head "hd", or NULL if the list is empty. This will also
- * work as a predicate, returning NULL if empty, and non-NULL
- * otherwise.
- */
-urb_link *first_urb_link (urb_link * hd)
-{
- urb_link *nx;
- if (NULL != hd && NULL != (nx = hd->next) && nx != hd) {
- /* There is at least one element in the list */
- /* (besides the distinguished head). */
- return (nx);
- }
- /* The list is empty */
- return (NULL);
-}
-
-/*
- * Return the first urb in a list with a distinguished
- * head "hd", or NULL if the list is empty.
- */
-struct urb *first_urb (urb_link * hd)
-{
- urb_link *nx;
- if (NULL == (nx = first_urb_link (hd))) {
- /* The list is empty */
- return (NULL);
- }
- return (p2surround (struct urb, link, nx));
-}
-
-/*
- * Detach and return the first urb in a list with a distinguished
- * head "hd", or NULL if the list is empty.
- *
- */
-struct urb *first_urb_detached (urb_link * hd)
-{
- struct urb *urb;
- if ((urb = first_urb (hd))) {
- urb_detach (urb);
- }
- return urb;
-}
-
-
-/*
- * Append an urb_link (or a whole list of
- * urb_links) to the tail of another list
- * of urb_links.
- */
-void urb_append (urb_link * hd, struct urb *urb)
-{
- if (hd && urb) {
- urb_link *new = &urb->link;
-
- /* This allows the new urb to be a list of urbs, */
- /* with new pointing at the first, but the link */
- /* must be initialized. */
- /* Order is important here... */
- urb_link *pul = hd->prev;
- new->prev->next = hd;
- hd->prev = new->prev;
- new->prev = pul;
- pul->next = new;
- }
-}
-
-/* URB create/destroy functions ***************************************************** */
-
-/**
- * usbd_alloc_urb - allocate an URB appropriate for specified endpoint
- * @device: device instance
- * @endpoint: endpoint
- *
- * Allocate an urb structure. The usb device urb structure is used to
- * contain all data associated with a transfer, including a setup packet for
- * control transfers.
- *
- * NOTE: endpoint_address MUST contain a direction flag.
- */
-struct urb *usbd_alloc_urb (struct usb_device_instance *device, struct usb_endpoint_instance *endpoint)
-{
- struct urb *urb;
-
- if( !(urb = (struct urb*)malloc(sizeof(struct urb))) ) {
- usberr(" F A T A L: malloc(%u) FAILED!!!!", sizeof(struct urb));
- return NULL;
- }
-
- /* Fill in known fields */
- memset(urb, 0, sizeof(struct urb));
- urb->endpoint = endpoint;
- urb->device = device;
- urb->buffer = (u8*)urb->buffer_data;
- urb->buffer_length = sizeof(urb->buffer_data);
-
- urb_link_init (&urb->link);
-
- return urb;
-}
-
-/**
- * usbd_dealloc_urb - deallocate an URB and associated buffer
- * @urb: pointer to an urb structure
- *
- * Deallocate an urb structure and associated data.
- */
-void usbd_dealloc_urb (struct urb *urb)
-{
- if (urb) {
- free (urb);
- }
-}
-
-/* Event signaling functions ***************************************************** */
-
-/**
- * usbd_device_event - called to respond to various usb events
- * @device: pointer to struct device
- * @event: event to respond to
- *
- * Used by a Bus driver to indicate an event.
- */
-void usbd_device_event_irq (struct usb_device_instance *device, usb_device_event_t event, int data)
-{
- usb_device_state_t state;
-
- if (!device || !device->bus) {
- usberr("(%p,%d) NULL device or device->bus", device, event);
- return;
- }
-
- state = device->device_state;
-
- usbinfo("%s", usbd_device_events[event]);
-
- switch (event) {
- case DEVICE_UNKNOWN:
- break;
- case DEVICE_INIT:
- device->device_state = STATE_INIT;
- break;
-
- case DEVICE_CREATE:
- device->device_state = STATE_ATTACHED;
- break;
-
- case DEVICE_HUB_CONFIGURED:
- device->device_state = STATE_POWERED;
- break;
-
- case DEVICE_RESET:
- device->device_state = STATE_DEFAULT;
- device->address = 0;
- break;
-
- case DEVICE_ADDRESS_ASSIGNED:
- device->device_state = STATE_ADDRESSED;
- break;
-
- case DEVICE_CONFIGURED:
- device->device_state = STATE_CONFIGURED;
- break;
-
- case DEVICE_DE_CONFIGURED:
- device->device_state = STATE_ADDRESSED;
- break;
-
- case DEVICE_BUS_INACTIVE:
- if (device->status != USBD_CLOSING) {
- device->status = USBD_SUSPENDED;
- }
- break;
- case DEVICE_BUS_ACTIVITY:
- if (device->status != USBD_CLOSING) {
- device->status = USBD_OK;
- }
- break;
-
- case DEVICE_SET_INTERFACE:
- break;
- case DEVICE_SET_FEATURE:
- break;
- case DEVICE_CLEAR_FEATURE:
- break;
-
- case DEVICE_POWER_INTERRUPTION:
- device->device_state = STATE_POWERED;
- break;
- case DEVICE_HUB_RESET:
- device->device_state = STATE_ATTACHED;
- break;
- case DEVICE_DESTROY:
- device->device_state = STATE_UNKNOWN;
- break;
-
- case DEVICE_FUNCTION_PRIVATE:
- break;
-
- default:
- usbdbg("event %d - not handled",event);
- break;
- }
- /*usbdbg("%s event: %d oldstate: %d newstate: %d status: %d address: %d",
- device->name, event, state,
- device->device_state, device->status, device->address); */
-
- /* tell the bus interface driver */
- if( device->event ) {
- /* usbdbg("calling device->event"); */
- device->event(device, event, data);
- }
-}
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Gerry Hamel, geh@ti.com, Texas Instruments
- *
- * (C) Copyright 2006
- * Bryan O'Donoghue, deckard@CodeHermit.ie
- *
- * Based on
- * linux/drivers/usbd/ep0.c
- *
- * Copyright (c) 2000, 2001, 2002 Lineo
- * Copyright (c) 2001 Hewlett Packard
- *
- * By:
- * Stuart Lynne <sl@lineo.com>,
- * Tom Rushworth <tbr@lineo.com>,
- * Bruce Balden <balden@lineo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * This is the builtin ep0 control function. It implements all required functionality
- * for responding to control requests (SETUP packets).
- *
- * XXX
- *
- * Currently we do not pass any SETUP packets (or other) to the configured
- * function driver. This may need to change.
- *
- * XXX
- *
- * As alluded to above, a simple callback cdc_recv_setup has been implemented
- * in the usb_device data structure to facilicate passing
- * Common Device Class packets to a function driver.
- *
- * XXX
- */
-
-#include <common.h>
-
-#if defined(CONFIG_USB_DEVICE)
-#include "usbdcore.h"
-
-#if 0
-#define dbg_ep0(lvl,fmt,args...) serial_printf("[%s] %s:%d: "fmt"\n",__FILE__,__FUNCTION__,__LINE__,##args)
-#else
-#define dbg_ep0(lvl,fmt,args...)
-#endif
-
-/* EP0 Configuration Set ********************************************************************* */
-
-
-/**
- * ep0_get_status - fill in URB data with appropriate status
- * @device:
- * @urb:
- * @index:
- * @requesttype:
- *
- */
-static int ep0_get_status (struct usb_device_instance *device,
- struct urb *urb, int index, int requesttype)
-{
- char *cp;
-
- urb->actual_length = 2;
- cp = (char*)urb->buffer;
- cp[0] = cp[1] = 0;
-
- switch (requesttype) {
- case USB_REQ_RECIPIENT_DEVICE:
- cp[0] = USB_STATUS_SELFPOWERED;
- break;
- case USB_REQ_RECIPIENT_INTERFACE:
- break;
- case USB_REQ_RECIPIENT_ENDPOINT:
- cp[0] = usbd_endpoint_halted (device, index);
- break;
- case USB_REQ_RECIPIENT_OTHER:
- urb->actual_length = 0;
- default:
- break;
- }
- dbg_ep0 (2, "%02x %02x", cp[0], cp[1]);
- return 0;
-}
-
-/**
- * ep0_get_one
- * @device:
- * @urb:
- * @result:
- *
- * Set a single byte value in the urb send buffer. Return non-zero to signal
- * a request error.
- */
-static int ep0_get_one (struct usb_device_instance *device, struct urb *urb,
- __u8 result)
-{
- urb->actual_length = 1; /* XXX 2? */
- ((char *) urb->buffer)[0] = result;
- return 0;
-}
-
-/**
- * copy_config
- * @urb: pointer to urb
- * @data: pointer to configuration data
- * @length: length of data
- *
- * Copy configuration data to urb transfer buffer if there is room for it.
- */
-void copy_config (struct urb *urb, void *data, int max_length,
- int max_buf)
-{
- int available;
- int length;
-
- /*dbg_ep0(3, "-> actual: %d buf: %d max_buf: %d max_length: %d data: %p", */
- /* urb->actual_length, urb->buffer_length, max_buf, max_length, data); */
-
- if (!data) {
- dbg_ep0 (1, "data is NULL");
- return;
- }
- length = max_length;
-
- if (length > max_length) {
- dbg_ep0 (1, "length: %d >= max_length: %d", length,
- max_length);
- return;
- }
- /*dbg_ep0(1, " actual: %d buf: %d max_buf: %d max_length: %d length: %d", */
- /* urb->actual_length, urb->buffer_length, max_buf, max_length, length); */
-
- if ((available =
- /*urb->buffer_length */ max_buf - urb->actual_length) <= 0) {
- return;
- }
- /*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */
- /* urb->actual_length, urb->buffer_length, max_buf, length, available); */
-
- if (length > available) {
- length = available;
- }
- /*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */
- /* urb->actual_length, urb->buffer_length, max_buf, length, available); */
-
- memcpy (urb->buffer + urb->actual_length, data, length);
- urb->actual_length += length;
-
- dbg_ep0 (3,
- "copy_config: <- actual: %d buf: %d max_buf: %d max_length: %d available: %d",
- urb->actual_length, urb->buffer_length, max_buf, max_length,
- available);
-}
-
-/**
- * ep0_get_descriptor
- * @device:
- * @urb:
- * @max:
- * @descriptor_type:
- * @index:
- *
- * Called by ep0_rx_process for a get descriptor device command. Determine what
- * descriptor is being requested, copy to send buffer. Return zero if ok to send,
- * return non-zero to signal a request error.
- */
-static int ep0_get_descriptor (struct usb_device_instance *device,
- struct urb *urb, int max, int descriptor_type,
- int index)
-{
- int port = 0; /* XXX compound device */
- char *cp;
-
- /*dbg_ep0(3, "max: %x type: %x index: %x", max, descriptor_type, index); */
-
- if (!urb || !urb->buffer || !urb->buffer_length
- || (urb->buffer_length < 255)) {
- dbg_ep0 (2, "invalid urb %p", urb);
- return -1L;
- }
-
- /* setup tx urb */
- urb->actual_length = 0;
- cp = (char*)urb->buffer;
-
- dbg_ep0 (2, "%s", USBD_DEVICE_DESCRIPTORS (descriptor_type));
-
- switch (descriptor_type) {
- case USB_DESCRIPTOR_TYPE_DEVICE:
- {
- struct usb_device_descriptor *device_descriptor;
- if (!
- (device_descriptor =
- usbd_device_device_descriptor (device, port))) {
- return -1;
- }
- /* copy descriptor for this device */
- copy_config (urb, device_descriptor,
- sizeof (struct usb_device_descriptor),
- max);
-
- /* correct the correct control endpoint 0 max packet size into the descriptor */
- device_descriptor =
- (struct usb_device_descriptor *) urb->buffer;
-
- }
- dbg_ep0(3, "copied device configuration, actual_length: 0x%x", urb->actual_length);
- break;
-
- case USB_DESCRIPTOR_TYPE_CONFIGURATION:
- {
- struct usb_configuration_descriptor
- *configuration_descriptor;
- struct usb_device_descriptor *device_descriptor;
- if (!
- (device_descriptor =
- usbd_device_device_descriptor (device, port))) {
- return -1;
- }
- /*dbg_ep0(2, "%d %d", index, device_descriptor->bNumConfigurations); */
- if (index > device_descriptor->bNumConfigurations) {
- dbg_ep0 (0, "index too large: %d > %d", index,
- device_descriptor->
- bNumConfigurations);
- return -1;
- }
-
- if (!
- (configuration_descriptor =
- usbd_device_configuration_descriptor (device,
- port,
- index))) {
- dbg_ep0 (0,
- "usbd_device_configuration_descriptor failed: %d",
- index);
- return -1;
- }
- dbg_ep0(0, "attempt to copy %d bytes to urb\n",cpu_to_le16(configuration_descriptor->wTotalLength));
- copy_config (urb, configuration_descriptor,
-
- cpu_to_le16(configuration_descriptor->wTotalLength),
- max);
- }
-
- break;
-
- case USB_DESCRIPTOR_TYPE_STRING:
- {
- struct usb_string_descriptor *string_descriptor;
- if (!(string_descriptor = usbd_get_string (index))) {
- serial_printf("Invalid string index %d\n", index);
- return -1;
- }
- dbg_ep0(3, "string_descriptor: %p length %d", string_descriptor, string_descriptor->bLength);
- copy_config (urb, string_descriptor, string_descriptor->bLength, max);
- }
- break;
- case USB_DESCRIPTOR_TYPE_INTERFACE:
- serial_printf("USB_DESCRIPTOR_TYPE_INTERFACE - error not implemented\n");
- return -1;
- case USB_DESCRIPTOR_TYPE_ENDPOINT:
- serial_printf("USB_DESCRIPTOR_TYPE_ENDPOINT - error not implemented\n");
- return -1;
- case USB_DESCRIPTOR_TYPE_HID:
- {
- serial_printf("USB_DESCRIPTOR_TYPE_HID - error not implemented\n");
- return -1; /* unsupported at this time */
-#if 0
- int bNumInterface =
- le16_to_cpu (urb->device_request.wIndex);
- int bAlternateSetting = 0;
- int class = 0;
- struct usb_class_descriptor *class_descriptor;
-
- if (!(class_descriptor =
- usbd_device_class_descriptor_index (device,
- port, 0,
- bNumInterface,
- bAlternateSetting,
- class))
- || class_descriptor->descriptor.hid.bDescriptorType != USB_DT_HID) {
- dbg_ep0 (3, "[%d] interface is not HID",
- bNumInterface);
- return -1;
- }
- /* copy descriptor for this class */
- copy_config (urb, class_descriptor,
- class_descriptor->descriptor.hid.bLength,
- max);
-#endif
- }
- break;
- case USB_DESCRIPTOR_TYPE_REPORT:
- {
- serial_printf("USB_DESCRIPTOR_TYPE_REPORT - error not implemented\n");
- return -1; /* unsupported at this time */
-#if 0
- int bNumInterface =
- le16_to_cpu (urb->device_request.wIndex);
- int bAlternateSetting = 0;
- int class = 0;
- struct usb_class_report_descriptor *report_descriptor;
-
- if (!(report_descriptor =
- usbd_device_class_report_descriptor_index
- (device, port, 0, bNumInterface,
- bAlternateSetting, class))
- || report_descriptor->bDescriptorType !=
- USB_DT_REPORT) {
- dbg_ep0 (3, "[%d] descriptor is not REPORT",
- bNumInterface);
- return -1;
- }
- /* copy report descriptor for this class */
- /*copy_config(urb, &report_descriptor->bData[0], report_descriptor->wLength, max); */
- if (max - urb->actual_length > 0) {
- int length =
- MIN (report_descriptor->wLength,
- max - urb->actual_length);
- memcpy (urb->buffer + urb->actual_length,
- &report_descriptor->bData[0], length);
- urb->actual_length += length;
- }
-#endif
- }
- break;
- case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER:
- {
- /* If a USB device supports both a full speed and low speed operation
- * we must send a Device_Qualifier descriptor here
- */
- return -1;
- }
- default:
- return -1;
- }
-
-
- dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d tx_packetSize: %2d",
- urb->buffer, urb->buffer_length, urb->actual_length,
- device->bus->endpoint_array[0].tx_packetSize);
-/*
- if ((urb->actual_length < max) && !(urb->actual_length % device->bus->endpoint_array[0].tx_packetSize)) {
- dbg_ep0(0, "adding null byte");
- urb->buffer[urb->actual_length++] = 0;
- dbg_ep0(0, "urb: buffer_length: %2d actual_length: %2d packet size: %2d",
- urb->buffer_length, urb->actual_length device->bus->endpoint_array[0].tx_packetSize);
- }
-*/
- return 0;
-
-}
-
-/**
- * ep0_recv_setup - called to indicate URB has been received
- * @urb: pointer to struct urb
- *
- * Check if this is a setup packet, process the device request, put results
- * back into the urb and return zero or non-zero to indicate success (DATA)
- * or failure (STALL).
- *
- */
-int ep0_recv_setup (struct urb *urb)
-{
- /*struct usb_device_request *request = urb->buffer; */
- /*struct usb_device_instance *device = urb->device; */
-
- struct usb_device_request *request;
- struct usb_device_instance *device;
- int address;
-
- dbg_ep0 (0, "entering ep0_recv_setup()");
- if (!urb || !urb->device) {
- dbg_ep0 (3, "invalid URB %p", urb);
- return -1;
- }
-
- request = &urb->device_request;
- device = urb->device;
-
- dbg_ep0 (3, "urb: %p device: %p", urb, urb->device);
-
-
- /*dbg_ep0(2, "- - - - - - - - - -"); */
-
- dbg_ep0 (2,
- "bmRequestType:%02x bRequest:%02x wValue:%04x wIndex:%04x wLength:%04x %s",
- request->bmRequestType, request->bRequest,
- le16_to_cpu (request->wValue), le16_to_cpu (request->wIndex),
- le16_to_cpu (request->wLength),
- USBD_DEVICE_REQUESTS (request->bRequest));
-
- /* handle USB Standard Request (c.f. USB Spec table 9-2) */
- if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) {
- if(device->device_state <= STATE_CONFIGURED){
- /* Attempt to handle a CDC specific request if we are
- * in the configured state.
- */
- return device->cdc_recv_setup(request,urb);
- }
- dbg_ep0 (1, "non standard request: %x",
- request->bmRequestType & USB_REQ_TYPE_MASK);
- return -1; /* Stall here */
- }
-
- switch (device->device_state) {
- case STATE_CREATED:
- case STATE_ATTACHED:
- case STATE_POWERED:
- /* It actually is important to allow requests in these states,
- * Windows will request descriptors before assigning an
- * address to the client.
- */
-
- /*dbg_ep0 (1, "request %s not allowed in this state: %s", */
- /* USBD_DEVICE_REQUESTS(request->bRequest), */
- /* usbd_device_states[device->device_state]); */
- /*return -1; */
- break;
-
- case STATE_INIT:
- case STATE_DEFAULT:
- switch (request->bRequest) {
- case USB_REQ_GET_STATUS:
- case USB_REQ_GET_INTERFACE:
- case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
- case USB_REQ_CLEAR_FEATURE:
- case USB_REQ_SET_FEATURE:
- case USB_REQ_SET_DESCRIPTOR:
- /* case USB_REQ_SET_CONFIGURATION: */
- case USB_REQ_SET_INTERFACE:
- dbg_ep0 (1,
- "request %s not allowed in DEFAULT state: %s",
- USBD_DEVICE_REQUESTS (request->bRequest),
- usbd_device_states[device->device_state]);
- return -1;
-
- case USB_REQ_SET_CONFIGURATION:
- case USB_REQ_SET_ADDRESS:
- case USB_REQ_GET_DESCRIPTOR:
- case USB_REQ_GET_CONFIGURATION:
- break;
- }
- case STATE_ADDRESSED:
- case STATE_CONFIGURED:
- break;
- case STATE_UNKNOWN:
- dbg_ep0 (1, "request %s not allowed in UNKNOWN state: %s",
- USBD_DEVICE_REQUESTS (request->bRequest),
- usbd_device_states[device->device_state]);
- return -1;
- }
-
- /* handle all requests that return data (direction bit set on bm RequestType) */
- if ((request->bmRequestType & USB_REQ_DIRECTION_MASK)) {
-
- dbg_ep0 (3, "Device-to-Host");
-
- switch (request->bRequest) {
-
- case USB_REQ_GET_STATUS:
- return ep0_get_status (device, urb, request->wIndex,
- request->bmRequestType &
- USB_REQ_RECIPIENT_MASK);
-
- case USB_REQ_GET_DESCRIPTOR:
- return ep0_get_descriptor (device, urb,
- le16_to_cpu (request->wLength),
- le16_to_cpu (request->wValue) >> 8,
- le16_to_cpu (request->wValue) & 0xff);
-
- case USB_REQ_GET_CONFIGURATION:
- serial_printf("get config %d\n", device->configuration);
- return ep0_get_one (device, urb,
- device->configuration);
-
- case USB_REQ_GET_INTERFACE:
- return ep0_get_one (device, urb, device->alternate);
-
- case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
- return -1;
-
- case USB_REQ_CLEAR_FEATURE:
- case USB_REQ_SET_FEATURE:
- case USB_REQ_SET_ADDRESS:
- case USB_REQ_SET_DESCRIPTOR:
- case USB_REQ_SET_CONFIGURATION:
- case USB_REQ_SET_INTERFACE:
- return -1;
- }
- }
- /* handle the requests that do not return data */
- else {
-
-
- /*dbg_ep0(3, "Host-to-Device"); */
- switch (request->bRequest) {
-
- case USB_REQ_CLEAR_FEATURE:
- case USB_REQ_SET_FEATURE:
- dbg_ep0 (0, "Host-to-Device");
- switch (request->
- bmRequestType & USB_REQ_RECIPIENT_MASK) {
- case USB_REQ_RECIPIENT_DEVICE:
- /* XXX DEVICE_REMOTE_WAKEUP or TEST_MODE would be added here */
- /* XXX fall through for now as we do not support either */
- case USB_REQ_RECIPIENT_INTERFACE:
- case USB_REQ_RECIPIENT_OTHER:
- dbg_ep0 (0, "request %s not",
- USBD_DEVICE_REQUESTS (request->bRequest));
- default:
- return -1;
-
- case USB_REQ_RECIPIENT_ENDPOINT:
- dbg_ep0 (0, "ENDPOINT: %x", le16_to_cpu (request->wValue));
- if (le16_to_cpu (request->wValue) == USB_ENDPOINT_HALT) {
- /*return usbd_device_feature (device, le16_to_cpu (request->wIndex), */
- /* request->bRequest == USB_REQ_SET_FEATURE); */
- /* NEED TO IMPLEMENT THIS!!! */
- return -1;
- } else {
- dbg_ep0 (1, "request %s bad wValue: %04x",
- USBD_DEVICE_REQUESTS
- (request->bRequest),
- le16_to_cpu (request->wValue));
- return -1;
- }
- }
-
- case USB_REQ_SET_ADDRESS:
- /* check if this is a re-address, reset first if it is (this shouldn't be possible) */
- if (device->device_state != STATE_DEFAULT) {
- dbg_ep0 (1, "set_address: %02x state: %s",
- le16_to_cpu (request->wValue),
- usbd_device_states[device->device_state]);
- return -1;
- }
- address = le16_to_cpu (request->wValue);
- if ((address & 0x7f) != address) {
- dbg_ep0 (1, "invalid address %04x %04x",
- address, address & 0x7f);
- return -1;
- }
- device->address = address;
-
- /*dbg_ep0(2, "address: %d %d %d", */
- /* request->wValue, le16_to_cpu(request->wValue), device->address); */
-
- return 0;
-
- case USB_REQ_SET_DESCRIPTOR: /* XXX should we support this? */
- dbg_ep0 (0, "set descriptor: NOT SUPPORTED");
- return -1;
-
- case USB_REQ_SET_CONFIGURATION:
- /* c.f. 9.4.7 - the top half of wValue is reserved */
- /* */
- if ((device->configuration =
- le16_to_cpu (request->wValue) & 0xFF80) != 0) {
- /* c.f. 9.4.7 - zero is the default or addressed state, in our case this */
- /* is the same is configuration zero */
- serial_printf("error setting dev->config to zero!\n");
- device->configuration = 0; /* TBR - ?????? */
- }
- /* reset interface and alternate settings */
- device->interface = device->alternate = 0;
-
- /*dbg_ep0(2, "set configuration: %d", device->configuration); */
- /*serial_printf("DEVICE_CONFIGURED.. event?\n"); */
- return 0;
-
- case USB_REQ_SET_INTERFACE:
- device->interface = le16_to_cpu (request->wIndex);
- device->alternate = le16_to_cpu (request->wValue);
- /*dbg_ep0(2, "set interface: %d alternate: %d", device->interface, device->alternate); */
- serial_printf ("DEVICE_SET_INTERFACE.. event?\n");
- return 0;
-
- case USB_REQ_GET_STATUS:
- case USB_REQ_GET_DESCRIPTOR:
- case USB_REQ_GET_CONFIGURATION:
- case USB_REQ_GET_INTERFACE:
- case USB_REQ_SYNCH_FRAME: /* XXX should never see this (?) */
- return -1;
- }
- }
- return -1;
-}
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2006 by Bryan O'Donoghue, CodeHermit
- * bodonoghue@CodeHermit.ie
- *
- * References
- * DasUBoot/drivers/usbdcore_omap1510.c, for design and implementation ideas.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- */
-
-/*
- * Notes :
- * 1. #define __SIMULATE_ERROR__ to inject a CRC error into every 2nd TX
- * packet to force the USB re-transmit protocol.
- *
- * 2. #define __DEBUG_UDC__ to switch on debug tracing to serial console
- * be careful that tracing doesn't create Hiesen-bugs with respect to
- * response timeouts to control requests.
- *
- * 3. This driver should be able to support any higher level driver that
- * that wants to do either of the two standard UDC implementations
- * Control-Bulk-Interrupt or Bulk-IN/Bulk-Out standards. Hence
- * gserial and cdc_acm should work with this code.
- *
- * 4. NAK events never actually get raised at all, the documentation
- * is just wrong !
- *
- * 5. For some reason, cbd_datlen is *always* +2 the value it should be.
- * this means that having an RX cbd of 16 bytes is not possible, since
- * the same size is reported for 14 bytes received as 16 bytes received
- * until we can find out why this happens, RX cbds must be limited to 8
- * bytes. TODO: check errata for this behaviour.
- *
- * 6. Right now this code doesn't support properly powering up with the USB
- * cable attached to the USB host my development board the Adder87x doesn't
- * have a pull-up fitted to allow this, so it is necessary to power the
- * board and *then* attached the USB cable to the host. However somebody
- * with a different design in their board may be able to keep the cable
- * constantly connected and simply enable/disable a pull-up re
- * figure 31.1 in MPC885RM.pdf instead of having to power up the board and
- * then attach the cable !
- *
- */
-#include <common.h>
-#include <config.h>
-
-#if defined(CONFIG_MPC885_FAMILY) && defined(CONFIG_USB_DEVICE)
-#include <commproc.h>
-#include "usbdcore.h"
-#include "usbdcore_mpc8xx.h"
-#include "usbdcore_ep0.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define ERR(fmt, args...)\
- serial_printf("ERROR : [%s] %s:%d: "fmt,\
- __FILE__,__FUNCTION__,__LINE__, ##args)
-#ifdef __DEBUG_UDC__
-#define DBG(fmt,args...)\
- serial_printf("[%s] %s:%d: "fmt,\
- __FILE__,__FUNCTION__,__LINE__, ##args)
-#else
-#define DBG(fmt,args...)
-#endif
-
-/* Static Data */
-#ifdef __SIMULATE_ERROR__
-static char err_poison_test = 0;
-#endif
-static struct mpc8xx_ep ep_ref[MAX_ENDPOINTS];
-static u32 address_base = STATE_NOT_READY;
-static mpc8xx_udc_state_t udc_state = 0;
-static struct usb_device_instance *udc_device = 0;
-static volatile usb_epb_t *endpoints[MAX_ENDPOINTS];
-static volatile cbd_t *tx_cbd[TX_RING_SIZE];
-static volatile cbd_t *rx_cbd[RX_RING_SIZE];
-static volatile immap_t *immr = 0;
-static volatile cpm8xx_t *cp = 0;
-static volatile usb_pram_t *usb_paramp = 0;
-static volatile usb_t *usbp = 0;
-static int rx_ct = 0;
-static int tx_ct = 0;
-
-/* Static Function Declarations */
-static void mpc8xx_udc_state_transition_up (usb_device_state_t initial,
- usb_device_state_t final);
-static void mpc8xx_udc_state_transition_down (usb_device_state_t initial,
- usb_device_state_t final);
-static void mpc8xx_udc_stall (unsigned int ep);
-static void mpc8xx_udc_flush_tx_fifo (int epid);
-static void mpc8xx_udc_flush_rx_fifo (void);
-static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp);
-static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi,
- struct urb *tx_urb);
-static void mpc8xx_udc_dump_request (struct usb_device_request *request);
-static void mpc8xx_udc_clock_init (volatile immap_t * immr,
- volatile cpm8xx_t * cp);
-static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi);
-static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp);
-static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp);
-static void mpc8xx_udc_cbd_init (void);
-static void mpc8xx_udc_endpoint_init (void);
-static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size);
-static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment);
-static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp);
-static void mpc8xx_udc_set_nak (unsigned int ep);
-static short mpc8xx_udc_handle_txerr (void);
-static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid);
-
-/******************************************************************************
- Global Linkage
- *****************************************************************************/
-
-/* udc_init
- *
- * Do initial bus gluing
- */
-int udc_init (void)
-{
- /* Init various pointers */
- immr = (immap_t *) CFG_IMMR;
- cp = (cpm8xx_t *) & (immr->im_cpm);
- usb_paramp = (usb_pram_t *) & (cp->cp_dparam[PROFF_USB]);
- usbp = (usb_t *) & (cp->cp_scc[0]);
-
- memset (ep_ref, 0x00, (sizeof (struct mpc8xx_ep) * MAX_ENDPOINTS));
-
- udc_device = 0;
- udc_state = STATE_NOT_READY;
-
- usbp->usmod = 0x00;
- usbp->uscom = 0;
-
- /* Set USB Frame #0, Respond at Address & Get a clock source */
- usbp->usaddr = 0x00;
- mpc8xx_udc_clock_init (immr, cp);
-
- /* PA15, PA14 as perhiperal USBRXD and USBOE */
- immr->im_ioport.iop_padir &= ~0x0003;
- immr->im_ioport.iop_papar |= 0x0003;
-
- /* PC11/PC10 as peripheral USBRXP USBRXN */
- immr->im_ioport.iop_pcso |= 0x0030;
-
- /* PC7/PC6 as perhiperal USBTXP and USBTXN */
- immr->im_ioport.iop_pcdir |= 0x0300;
- immr->im_ioport.iop_pcpar |= 0x0300;
-
- /* Set the base address */
- address_base = (u32) (cp->cp_dpmem + CPM_USB_BASE);
-
- /* Initialise endpoints and circular buffers */
- mpc8xx_udc_endpoint_init ();
- mpc8xx_udc_cbd_init ();
-
- /* Assign allocated Dual Port Endpoint descriptors */
- usb_paramp->ep0ptr = (u32) endpoints[0];
- usb_paramp->ep1ptr = (u32) endpoints[1];
- usb_paramp->ep2ptr = (u32) endpoints[2];
- usb_paramp->ep3ptr = (u32) endpoints[3];
- usb_paramp->frame_n = 0;
-
- DBG ("ep0ptr=0x%08x ep1ptr=0x%08x ep2ptr=0x%08x ep3ptr=0x%08x\n",
- usb_paramp->ep0ptr, usb_paramp->ep1ptr, usb_paramp->ep2ptr,
- usb_paramp->ep3ptr);
-
- return 0;
-}
-
-/* udc_irq
- *
- * Poll for whatever events may have occured
- */
-void udc_irq (void)
-{
- int epid = 0;
- volatile cbd_t *rx_cbdp = 0;
- volatile cbd_t *rx_cbdp_base = 0;
-
- if (udc_state != STATE_READY) {
- return;
- }
-
- if (usbp->usber & USB_E_BSY) {
- /* This shouldn't happen. If it does then it's a bug ! */
- usbp->usber |= USB_E_BSY;
- mpc8xx_udc_flush_rx_fifo ();
- }
-
- /* Scan all RX/Bidirectional Endpoints for RX data. */
- for (epid = 0; epid < MAX_ENDPOINTS; epid++) {
- if (!ep_ref[epid].prx) {
- continue;
- }
- rx_cbdp = rx_cbdp_base = ep_ref[epid].prx;
-
- do {
- if (!(rx_cbdp->cbd_sc & RX_BD_E)) {
-
- if (rx_cbdp->cbd_sc & 0x1F) {
- /* Corrupt data discard it.
- * Controller has NAK'd this packet.
- */
- mpc8xx_udc_clear_rxbd (rx_cbdp);
-
- } else {
- if (!epid) {
- mpc8xx_udc_ep0_rx (rx_cbdp);
-
- } else {
- /* Process data */
- mpc8xx_udc_set_nak (epid);
- mpc8xx_udc_epn_rx (epid, rx_cbdp);
- mpc8xx_udc_clear_rxbd (rx_cbdp);
- }
- }
-
- /* Advance RX CBD pointer */
- mpc8xx_udc_advance_rx (&rx_cbdp, epid);
- ep_ref[epid].prx = rx_cbdp;
- } else {
- /* Advance RX CBD pointer */
- mpc8xx_udc_advance_rx (&rx_cbdp, epid);
- }
-
- } while (rx_cbdp != rx_cbdp_base);
- }
-
- /* Handle TX events as appropiate, the correct place to do this is
- * in a tx routine. Perhaps TX on epn was pre-empted by ep0
- */
-
- if (usbp->usber & USB_E_TXB) {
- usbp->usber |= USB_E_TXB;
- }
-
- if (usbp->usber & (USB_TX_ERRMASK)) {
- mpc8xx_udc_handle_txerr ();
- }
-
- /* Switch to the default state, respond at the default address */
- if (usbp->usber & USB_E_RESET) {
- usbp->usber |= USB_E_RESET;
- usbp->usaddr = 0x00;
- udc_device->device_state = STATE_DEFAULT;
- }
-
- /* if(usbp->usber&USB_E_IDLE){
- We could suspend here !
- usbp->usber|=USB_E_IDLE;
- DBG("idle state change\n");
- }
- if(usbp->usbs){
- We could resume here when IDLE is deasserted !
- Not worth doing, so long as we are self powered though.
- }
- */
-
- return;
-}
-
-/* udc_endpoint_write
- *
- * Write some data to an endpoint
- */
-int udc_endpoint_write (struct usb_endpoint_instance *epi)
-{
- int ep = 0;
- short epid = 1, unnak = 0, ret = 0;
-
- if (udc_state != STATE_READY) {
- ERR ("invalid udc_state != STATE_READY!\n");
- return -1;
- }
-
- if (!udc_device || !epi) {
- return -1;
- }
-
- if (udc_device->device_state != STATE_CONFIGURED) {
- return -1;
- }
-
- ep = epi->endpoint_address & 0x03;
- if (ep >= MAX_ENDPOINTS) {
- return -1;
- }
-
- /* Set NAK for all RX endpoints during TX */
- for (epid = 1; epid < MAX_ENDPOINTS; epid++) {
-
- /* Don't set NAK on DATA IN/CONTROL endpoints */
- if (ep_ref[epid].sc & USB_DIR_IN) {
- continue;
- }
-
- if (!(usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK))) {
- unnak |= 1 << epid;
- }
-
- mpc8xx_udc_set_nak (epid);
- }
-
- mpc8xx_udc_init_tx (&udc_device->bus->endpoint_array[ep],
- epi->tx_urb);
- ret = mpc8xx_udc_ep_tx (&udc_device->bus->endpoint_array[ep]);
-
- /* Remove temporary NAK */
- for (epid = 1; epid < MAX_ENDPOINTS; epid++) {
- if (unnak & (1 << epid)) {
- udc_unset_nak (epid);
- }
- }
-
- return ret;
-}
-
-/* mpc8xx_udc_assign_urb
- *
- * Associate a given urb to an endpoint TX or RX transmit/receive buffers
- */
-static int mpc8xx_udc_assign_urb (int ep, char direction)
-{
- struct usb_endpoint_instance *epi = 0;
-
- if (ep >= MAX_ENDPOINTS) {
- goto err;
- }
- epi = &udc_device->bus->endpoint_array[ep];
- if (!epi) {
- goto err;
- }
-
- if (!ep_ref[ep].urb) {
- ep_ref[ep].urb = usbd_alloc_urb (udc_device, udc_device->bus->endpoint_array);
- if (!ep_ref[ep].urb) {
- goto err;
- }
- } else {
- ep_ref[ep].urb->actual_length = 0;
- }
-
- switch (direction) {
- case USB_DIR_IN:
- epi->tx_urb = ep_ref[ep].urb;
- break;
- case USB_DIR_OUT:
- epi->rcv_urb = ep_ref[ep].urb;
- break;
- default:
- goto err;
- }
- return 0;
-
- err:
- udc_state = STATE_ERROR;
- return -1;
-}
-
-/* udc_setup_ep
- *
- * Associate U-Boot software endpoints to mpc8xx endpoint parameter ram
- * Isochronous endpoints aren't yet supported!
- */
-void udc_setup_ep (struct usb_device_instance *device, unsigned int ep,
- struct usb_endpoint_instance *epi)
-{
- uchar direction = 0;
- int ep_attrib = 0;
-
- if (epi && (ep < MAX_ENDPOINTS)) {
-
- if (ep == 0) {
- if (epi->rcv_attributes != USB_ENDPOINT_XFER_CONTROL
- || epi->tx_attributes !=
- USB_ENDPOINT_XFER_CONTROL) {
-
- /* ep0 must be a control endpoint */
- udc_state = STATE_ERROR;
- return;
-
- }
- if (!(ep_ref[ep].sc & EP_ATTACHED)) {
- mpc8xx_udc_cbd_attach (ep, epi->tx_packetSize,
- epi->rcv_packetSize);
- }
- usbp->usep[ep] = 0x0000;
- return;
- }
-
- if ((epi->endpoint_address & USB_ENDPOINT_DIR_MASK)
- == USB_DIR_IN) {
-
- direction = 1;
- ep_attrib = epi->tx_attributes;
- epi->rcv_packetSize = 0;
- ep_ref[ep].sc |= USB_DIR_IN;
- } else {
-
- direction = 0;
- ep_attrib = epi->rcv_attributes;
- epi->tx_packetSize = 0;
- ep_ref[ep].sc &= ~USB_DIR_IN;
- }
-
- if (mpc8xx_udc_assign_urb (ep, epi->endpoint_address
- & USB_ENDPOINT_DIR_MASK)) {
- return;
- }
-
- switch (ep_attrib) {
- case USB_ENDPOINT_XFER_CONTROL:
- if (!(ep_ref[ep].sc & EP_ATTACHED)) {
- mpc8xx_udc_cbd_attach (ep,
- epi->tx_packetSize,
- epi->rcv_packetSize);
- }
- usbp->usep[ep] = ep << 12;
- epi->rcv_urb = epi->tx_urb = ep_ref[ep].urb;
-
- break;
- case USB_ENDPOINT_XFER_BULK:
- case USB_ENDPOINT_XFER_INT:
- if (!(ep_ref[ep].sc & EP_ATTACHED)) {
- if (direction) {
- mpc8xx_udc_cbd_attach (ep,
- epi->tx_packetSize,
- 0);
- } else {
- mpc8xx_udc_cbd_attach (ep,
- 0,
- epi->rcv_packetSize);
- }
- }
- usbp->usep[ep] = (ep << 12) | ((ep_attrib) << 8);
-
- break;
- case USB_ENDPOINT_XFER_ISOC:
- default:
- serial_printf ("Error endpoint attrib %d>3\n", ep_attrib);
- udc_state = STATE_ERROR;
- break;
- }
- }
-
-}
-
-/* udc_connect
- *
- * Move state, switch on the USB
- */
-void udc_connect (void)
-{
- /* Enable pull-up resistor on D+
- * TODO: fit a pull-up resistor to drive SE0 for > 2.5us
- */
-
- if (udc_state != STATE_ERROR) {
- udc_state = STATE_READY;
- usbp->usmod |= USMOD_EN;
- }
-}
-
-/* udc_disconnect
- *
- * Disconnect is not used but, is included for completeness
- */
-void udc_disconnect (void)
-{
- /* Disable pull-up resistor on D-
- * TODO: fix a pullup resistor to control this
- */
-
- if (udc_state != STATE_ERROR) {
- udc_state = STATE_NOT_READY;
- }
- usbp->usmod &= ~USMOD_EN;
-}
-
-/* udc_enable
- *
- * Grab an EP0 URB, register interest in a subset of USB events
- */
-void udc_enable (struct usb_device_instance *device)
-{
- if (udc_state == STATE_ERROR) {
- return;
- }
-
- udc_device = device;
-
- if (!ep_ref[0].urb) {
- ep_ref[0].urb = usbd_alloc_urb (device, device->bus->endpoint_array);
- }
-
- /* Register interest in all events except SOF, enable transceiver */
- usbp->usber = 0x03FF;
- usbp->usbmr = 0x02F7;
-
- return;
-}
-
-/* udc_disable
- *
- * disable the currently hooked device
- */
-void udc_disable (void)
-{
- int i = 0;
-
- if (udc_state == STATE_ERROR) {
- DBG ("Won't disable UDC. udc_state==STATE_ERROR !\n");
- return;
- }
-
- udc_device = 0;
-
- for (; i < MAX_ENDPOINTS; i++) {
- if (ep_ref[i].urb) {
- usbd_dealloc_urb (ep_ref[i].urb);
- ep_ref[i].urb = 0;
- }
- }
-
- usbp->usbmr = 0x00;
- usbp->usmod = ~USMOD_EN;
- udc_state = STATE_NOT_READY;
-}
-
-/* udc_startup_events
- *
- * Enable the specified device
- */
-void udc_startup_events (struct usb_device_instance *device)
-{
- udc_enable (device);
- if (udc_state == STATE_READY) {
- usbd_device_event_irq (device, DEVICE_CREATE, 0);
- }
-}
-
-/* udc_set_nak
- *
- * Allow upper layers to signal lower layers should not accept more RX data
- *
- */
-void udc_set_nak (int epid)
-{
- if (epid) {
- mpc8xx_udc_set_nak (epid);
- }
-}
-
-/* udc_unset_nak
- *
- * Suspend sending of NAK tokens for DATA OUT tokens on a given endpoint.
- * Switch off NAKing on this endpoint to accept more data output from host.
- *
- */
-void udc_unset_nak (int epid)
-{
- if (epid > MAX_ENDPOINTS) {
- return;
- }
-
- if (usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK)) {
- usbp->usep[epid] &= ~(USEP_THS_NAK | USEP_RHS_NAK);
- __asm__ ("eieio");
- }
-}
-
-/******************************************************************************
- Static Linkage
-******************************************************************************/
-
-/* udc_state_transition_up
- * udc_state_transition_down
- *
- * Helper functions to implement device state changes. The device states and
- * the events that transition between them are:
- *
- * STATE_ATTACHED
- * || /\
- * \/ ||
- * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET
- * || /\
- * \/ ||
- * STATE_POWERED
- * || /\
- * \/ ||
- * DEVICE_RESET DEVICE_POWER_INTERRUPTION
- * || /\
- * \/ ||
- * STATE_DEFAULT
- * || /\
- * \/ ||
- * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET
- * || /\
- * \/ ||
- * STATE_ADDRESSED
- * || /\
- * \/ ||
- * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED
- * || /\
- * \/ ||
- * STATE_CONFIGURED
- *
- * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED
- * to STATE_CONFIGURED) from the specified initial state to the specified final
- * state, passing through each intermediate state on the way. If the initial
- * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then
- * no state transitions will take place.
- *
- * udc_state_transition_down transitions down (in the direction from
- * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the
- * specified final state, passing through each intermediate state on the way.
- * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final
- * state, then no state transitions will take place.
- *
- */
-
-static void mpc8xx_udc_state_transition_up (usb_device_state_t initial,
- usb_device_state_t final)
-{
- if (initial < final) {
- switch (initial) {
- case STATE_ATTACHED:
- usbd_device_event_irq (udc_device,
- DEVICE_HUB_CONFIGURED, 0);
- if (final == STATE_POWERED)
- break;
- case STATE_POWERED:
- usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
- if (final == STATE_DEFAULT)
- break;
- case STATE_DEFAULT:
- usbd_device_event_irq (udc_device,
- DEVICE_ADDRESS_ASSIGNED, 0);
- if (final == STATE_ADDRESSED)
- break;
- case STATE_ADDRESSED:
- usbd_device_event_irq (udc_device, DEVICE_CONFIGURED,
- 0);
- case STATE_CONFIGURED:
- break;
- default:
- break;
- }
- }
-}
-
-static void mpc8xx_udc_state_transition_down (usb_device_state_t initial,
- usb_device_state_t final)
-{
- if (initial > final) {
- switch (initial) {
- case STATE_CONFIGURED:
- usbd_device_event_irq (udc_device,
- DEVICE_DE_CONFIGURED, 0);
- if (final == STATE_ADDRESSED)
- break;
- case STATE_ADDRESSED:
- usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
- if (final == STATE_DEFAULT)
- break;
- case STATE_DEFAULT:
- usbd_device_event_irq (udc_device,
- DEVICE_POWER_INTERRUPTION, 0);
- if (final == STATE_POWERED)
- break;
- case STATE_POWERED:
- usbd_device_event_irq (udc_device, DEVICE_HUB_RESET,
- 0);
- case STATE_ATTACHED:
- break;
- default:
- break;
- }
- }
-}
-
-/* mpc8xx_udc_stall
- *
- * Force returning of STALL tokens on the given endpoint. Protocol or function
- * STALL conditions are permissable here
- */
-static void mpc8xx_udc_stall (unsigned int ep)
-{
- usbp->usep[ep] |= STALL_BITMASK;
-}
-
-/* mpc8xx_udc_set_nak
- *
- * Force returning of NAK responses for the given endpoint as a kind of very
- * simple flow control
- */
-static void mpc8xx_udc_set_nak (unsigned int ep)
-{
- usbp->usep[ep] |= NAK_BITMASK;
- __asm__ ("eieio");
-}
-
-/* mpc8xx_udc_handle_txerr
- *
- * Handle errors relevant to TX. Return a status code to allow calling
- * indicative of what if anything happened
- */
-static short mpc8xx_udc_handle_txerr ()
-{
- short ep = 0, ret = 0;
-
- for (; ep < TX_RING_SIZE; ep++) {
- if (usbp->usber & (0x10 << ep)) {
-
- /* Timeout or underrun */
- if (tx_cbd[ep]->cbd_sc & 0x06) {
- ret = 1;
- mpc8xx_udc_flush_tx_fifo (ep);
-
- } else {
- if (usbp->usep[ep] & STALL_BITMASK) {
- if (!ep) {
- usbp->usep[ep] &= ~STALL_BITMASK;
- }
- } /* else NAK */
- }
- usbp->usber |= (0x10 << ep);
- }
- }
- return ret;
-}
-
-/* mpc8xx_udc_advance_rx
- *
- * Advance cbd rx
- */
-static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid)
-{
- if ((*rx_cbdp)->cbd_sc & RX_BD_W) {
- *rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CFG_IMMR);
-
- } else {
- (*rx_cbdp)++;
- }
-}
-
-
-/* mpc8xx_udc_flush_tx_fifo
- *
- * Flush a given TX fifo. Assumes one tx cbd per endpoint
- */
-static void mpc8xx_udc_flush_tx_fifo (int epid)
-{
- volatile cbd_t *tx_cbdp = 0;
-
- if (epid > MAX_ENDPOINTS) {
- return;
- }
-
- /* TX stop */
- immr->im_cpm.cp_cpcr = ((epid << 2) | 0x1D01);
- __asm__ ("eieio");
- while (immr->im_cpm.cp_cpcr & 0x01);
-
- usbp->uscom = 0x40 | 0;
-
- /* reset ring */
- tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CFG_IMMR);
- tx_cbdp->cbd_sc = (TX_BD_I | TX_BD_W);
-
-
- endpoints[epid]->tptr = endpoints[epid]->tbase;
- endpoints[epid]->tstate = 0x00;
- endpoints[epid]->tbcnt = 0x00;
-
- /* TX start */
- immr->im_cpm.cp_cpcr = ((epid << 2) | 0x2D01);
- __asm__ ("eieio");
- while (immr->im_cpm.cp_cpcr & 0x01);
-
- return;
-}
-
-/* mpc8xx_udc_flush_rx_fifo
- *
- * For the sake of completeness of the namespace, it seems like
- * a good-design-decision (tm) to include mpc8xx_udc_flush_rx_fifo();
- * If RX_BD_E is true => a driver bug either here or in an upper layer
- * not polling frequently enough. If RX_BD_E is true we have told the host
- * we have accepted data but, the CPM found it had no-where to put that data
- * which needless to say would be a bad thing.
- */
-static void mpc8xx_udc_flush_rx_fifo ()
-{
- int i = 0;
-
- for (i = 0; i < RX_RING_SIZE; i++) {
- if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) {
- ERR ("buf %p used rx data len = 0x%x sc=0x%x!\n",
- rx_cbd[i], rx_cbd[i]->cbd_datlen,
- rx_cbd[i]->cbd_sc);
-
- }
- }
- ERR ("BUG : Input over-run\n");
-}
-
-/* mpc8xx_udc_clear_rxbd
- *
- * Release control of RX CBD to CP.
- */
-static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp)
-{
- rx_cbdp->cbd_datlen = 0x0000;
- rx_cbdp->cbd_sc = ((rx_cbdp->cbd_sc & RX_BD_W) | (RX_BD_E | RX_BD_I));
- __asm__ ("eieio");
-}
-
-/* mpc8xx_udc_tx_irq
- *
- * Parse for tx timeout, control RX or USB reset/busy conditions
- * Return -1 on timeout, -2 on fatal error, else return zero
- */
-static int mpc8xx_udc_tx_irq (int ep)
-{
- int i = 0;
-
- if (usbp->usber & (USB_TX_ERRMASK)) {
- if (mpc8xx_udc_handle_txerr ()) {
- /* Timeout, controlling function must retry send */
- return -1;
- }
- }
-
- if (usbp->usber & (USB_E_RESET | USB_E_BSY)) {
- /* Fatal, abandon TX transaction */
- return -2;
- }
-
- if (usbp->usber & USB_E_RXB) {
- for (i = 0; i < RX_RING_SIZE; i++) {
- if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) {
- if ((rx_cbd[i] == ep_ref[0].prx) || ep) {
- return -2;
- }
- }
- }
- }
-
- return 0;
-}
-
-/* mpc8xx_udc_ep_tx
- *
- * Transmit in a re-entrant fashion outbound USB packets.
- * Implement retry/timeout mechanism described in USB specification
- * Toggle DATA0/DATA1 pids as necessary
- * Introduces non-standard tx_retry. The USB standard has no scope for slave
- * devices to give up TX, however tx_retry stops us getting stuck in an endless
- * TX loop.
- */
-static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi)
-{
- struct urb *urb = epi->tx_urb;
- volatile cbd_t *tx_cbdp = 0;
- unsigned int ep = 0, pkt_len = 0, x = 0, tx_retry = 0;
- int ret = 0;
-
- if (!epi || (epi->endpoint_address & 0x03) >= MAX_ENDPOINTS || !urb) {
- return -1;
- }
-
- ep = epi->endpoint_address & 0x03;
- tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
-
- if (tx_cbdp->cbd_sc & TX_BD_R || usbp->usber & USB_E_TXB) {
- mpc8xx_udc_flush_tx_fifo (ep);
- usbp->usber |= USB_E_TXB;
- };
-
- while (tx_retry++ < 100) {
- ret = mpc8xx_udc_tx_irq (ep);
- if (ret == -1) {
- /* ignore timeout here */
- } else if (ret == -2) {
- /* Abandon TX */
- mpc8xx_udc_flush_tx_fifo (ep);
- return -1;
- }
-
- tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
- while (tx_cbdp->cbd_sc & TX_BD_R) {
- };
- tx_cbdp->cbd_sc = (tx_cbdp->cbd_sc & TX_BD_W);
-
- pkt_len = urb->actual_length - epi->sent;
-
- if (pkt_len > epi->tx_packetSize || pkt_len > EP_MAX_PKT) {
- pkt_len = MIN (epi->tx_packetSize, EP_MAX_PKT);
- }
-
- for (x = 0; x < pkt_len; x++) {
- *((unsigned char *) (tx_cbdp->cbd_bufaddr + x)) =
- urb->buffer[epi->sent + x];
- }
- tx_cbdp->cbd_datlen = pkt_len;
- tx_cbdp->cbd_sc |= (CBD_TX_BITMASK | ep_ref[ep].pid);
- __asm__ ("eieio");
-
-#ifdef __SIMULATE_ERROR__
- if (++err_poison_test == 2) {
- err_poison_test = 0;
- tx_cbdp->cbd_sc &= ~TX_BD_TC;
- }
-#endif
-
- usbp->uscom = (USCOM_STR | ep);
-
- while (!(usbp->usber & USB_E_TXB)) {
- ret = mpc8xx_udc_tx_irq (ep);
- if (ret == -1) {
- /* TX timeout */
- break;
- } else if (ret == -2) {
- if (usbp->usber & USB_E_TXB) {
- usbp->usber |= USB_E_TXB;
- }
- mpc8xx_udc_flush_tx_fifo (ep);
- return -1;
- }
- };
-
- if (usbp->usber & USB_E_TXB) {
- usbp->usber |= USB_E_TXB;
- }
-
- /* ACK must be present <= 18bit times from TX */
- if (ret == -1) {
- continue;
- }
-
- /* TX ACK : USB 2.0 8.7.2, Toggle PID, Advance TX */
- epi->sent += pkt_len;
- epi->last = MIN (urb->actual_length - epi->sent, epi->tx_packetSize);
- TOGGLE_TX_PID (ep_ref[ep].pid);
-
- if (epi->sent >= epi->tx_urb->actual_length) {
-
- epi->tx_urb->actual_length = 0;
- epi->sent = 0;
-
- if (ep_ref[ep].sc & EP_SEND_ZLP) {
- ep_ref[ep].sc &= ~EP_SEND_ZLP;
- } else {
- return 0;
- }
- }
- }
-
- ERR ("TX fail, endpoint 0x%x tx bytes 0x%x/0x%x\n", ep, epi->sent,
- epi->tx_urb->actual_length);
-
- return -1;
-}
-
-/* mpc8xx_udc_dump_request
- *
- * Dump a control request to console
- */
-static void mpc8xx_udc_dump_request (struct usb_device_request *request)
-{
- DBG ("bmRequestType:%02x bRequest:%02x wValue:%04x "
- "wIndex:%04x wLength:%04x ?\n",
- request->bmRequestType,
- request->bRequest,
- request->wValue, request->wIndex, request->wLength);
-
- return;
-}
-
-/* mpc8xx_udc_ep0_rx_setup
- *
- * Decode received ep0 SETUP packet. return non-zero on error
- */
-static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp)
-{
- unsigned int x = 0;
- struct urb *purb = ep_ref[0].urb;
- struct usb_endpoint_instance *epi =
- &udc_device->bus->endpoint_array[0];
-
- for (; x < rx_cbdp->cbd_datlen; x++) {
- *(((unsigned char *) &ep_ref[0].urb->device_request) + x) =
- *((unsigned char *) (rx_cbdp->cbd_bufaddr + x));
- }
-
- mpc8xx_udc_clear_rxbd (rx_cbdp);
-
- if (ep0_recv_setup (purb)) {
- mpc8xx_udc_dump_request (&purb->device_request);
- return -1;
- }
-
- if ((purb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK)
- == USB_REQ_HOST2DEVICE) {
-
- switch (purb->device_request.bRequest) {
- case USB_REQ_SET_ADDRESS:
- /* Send the Status OUT ZLP */
- ep_ref[0].pid = TX_BD_PID_DATA1;
- purb->actual_length = 0;
- mpc8xx_udc_init_tx (epi, purb);
- mpc8xx_udc_ep_tx (epi);
-
- /* Move to the addressed state */
- usbp->usaddr = udc_device->address;
- mpc8xx_udc_state_transition_up (udc_device->device_state,
- STATE_ADDRESSED);
- return 0;
-
- case USB_REQ_SET_CONFIGURATION:
- if (!purb->device_request.wValue) {
- /* Respond at default address */
- usbp->usaddr = 0x00;
- mpc8xx_udc_state_transition_down (udc_device->device_state,
- STATE_ADDRESSED);
- } else {
- /* TODO: Support multiple configurations */
- mpc8xx_udc_state_transition_up (udc_device->device_state,
- STATE_CONFIGURED);
- for (x = 1; x < MAX_ENDPOINTS; x++) {
- if ((udc_device->bus->endpoint_array[x].endpoint_address & USB_ENDPOINT_DIR_MASK)
- == USB_DIR_IN) {
- ep_ref[x].pid = TX_BD_PID_DATA0;
- } else {
- ep_ref[x].pid = RX_BD_PID_DATA0;
- }
- /* Set configuration must unstall endpoints */
- usbp->usep[x] &= ~STALL_BITMASK;
- }
- }
- break;
- default:
- /* CDC/Vendor specific */
- break;
- }
-
- /* Send ZLP as ACK in Status OUT phase */
- ep_ref[0].pid = TX_BD_PID_DATA1;
- purb->actual_length = 0;
- mpc8xx_udc_init_tx (epi, purb);
- mpc8xx_udc_ep_tx (epi);
-
- } else {
-
- if (purb->actual_length) {
- ep_ref[0].pid = TX_BD_PID_DATA1;
- mpc8xx_udc_init_tx (epi, purb);
-
- if (!(purb->actual_length % EP0_MAX_PACKET_SIZE)) {
- ep_ref[0].sc |= EP_SEND_ZLP;
- }
-
- if (purb->device_request.wValue ==
- USB_DESCRIPTOR_TYPE_DEVICE) {
- if (le16_to_cpu (purb->device_request.wLength)
- > purb->actual_length) {
- /* Send EP0_MAX_PACKET_SIZE bytes
- * unless correct size requested.
- */
- if (purb->actual_length > epi->tx_packetSize) {
- purb->actual_length = epi->tx_packetSize;
- }
- }
- }
- mpc8xx_udc_ep_tx (epi);
-
- } else {
- /* Corrupt SETUP packet? */
- ERR ("Zero length data or SETUP with DATA-IN phase ?\n");
- return 1;
- }
- }
- return 0;
-}
-
-/* mpc8xx_udc_init_tx
- *
- * Setup some basic parameters for a TX transaction
- */
-static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi,
- struct urb *tx_urb)
-{
- epi->sent = 0;
- epi->last = 0;
- epi->tx_urb = tx_urb;
-}
-
-/* mpc8xx_udc_ep0_rx
- *
- * Receive ep0/control USB data. Parse and possibly send a response.
- */
-static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp)
-{
- if (rx_cbdp->cbd_sc & RX_BD_PID_SETUP) {
-
- /* Unconditionally accept SETUP packets */
- if (mpc8xx_udc_ep0_rx_setup (rx_cbdp)) {
- mpc8xx_udc_stall (0);
- }
-
- } else {
-
- mpc8xx_udc_clear_rxbd (rx_cbdp);
-
- if ((rx_cbdp->cbd_datlen - 2)) {
- /* SETUP with a DATA phase
- * outside of SETUP packet.
- * Reply with STALL.
- */
- mpc8xx_udc_stall (0);
- }
- }
-}
-
-/* mpc8xx_udc_epn_rx
- *
- * Receive some data from cbd into USB system urb data abstraction
- * Upper layers should NAK if there is insufficient RX data space
- */
-static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp)
-{
- struct usb_endpoint_instance *epi = 0;
- struct urb *urb = 0;
- unsigned int x = 0;
-
- if (epid >= MAX_ENDPOINTS || !rx_cbdp->cbd_datlen) {
- return 0;
- }
-
- /* USB 2.0 PDF section 8.6.4
- * Discard data with invalid PID it is a resend.
- */
- if (ep_ref[epid].pid != (rx_cbdp->cbd_sc & 0xC0)) {
- return 1;
- }
- TOGGLE_RX_PID (ep_ref[epid].pid);
-
- epi = &udc_device->bus->endpoint_array[epid];
- urb = epi->rcv_urb;
-
- for (; x < (rx_cbdp->cbd_datlen - 2); x++) {
- *((unsigned char *) (urb->buffer + urb->actual_length + x)) =
- *((unsigned char *) (rx_cbdp->cbd_bufaddr + x));
- }
-
- if (x) {
- usbd_rcv_complete (epi, x, 0);
- if (ep_ref[epid].urb->status == RECV_ERROR) {
- DBG ("RX error unset NAK\n");
- udc_unset_nak (epid);
- }
- }
- return x;
-}
-
-/* mpc8xx_udc_clock_init
- *
- * Obtain a clock reference for Full Speed Signaling
- */
-static void mpc8xx_udc_clock_init (volatile immap_t * immr,
- volatile cpm8xx_t * cp)
-{
-
-#if defined(CFG_USB_EXTC_CLK)
-
- /* This has been tested with a 48MHz crystal on CLK6 */
- switch (CFG_USB_EXTC_CLK) {
- case 1:
- immr->im_ioport.iop_papar |= 0x0100;
- immr->im_ioport.iop_padir &= ~0x0100;
- cp->cp_sicr |= 0x24;
- break;
- case 2:
- immr->im_ioport.iop_papar |= 0x0200;
- immr->im_ioport.iop_padir &= ~0x0200;
- cp->cp_sicr |= 0x2D;
- break;
- case 3:
- immr->im_ioport.iop_papar |= 0x0400;
- immr->im_ioport.iop_padir &= ~0x0400;
- cp->cp_sicr |= 0x36;
- break;
- case 4:
- immr->im_ioport.iop_papar |= 0x0800;
- immr->im_ioport.iop_padir &= ~0x0800;
- cp->cp_sicr |= 0x3F;
- break;
- default:
- udc_state = STATE_ERROR;
- break;
- }
-
-#elif defined(CFG_USB_BRGCLK)
-
- /* This has been tested with brgclk == 50MHz */
- int divisor = 0;
-
- if (gd->cpu_clk < 48000000L) {
- ERR ("brgclk is too slow for full-speed USB!\n");
- udc_state = STATE_ERROR;
- return;
- }
-
- /* Assume the brgclk is 'good enough', we want !(gd->cpu_clk%48Mhz)
- * but, can /probably/ live with close-ish alternative rates.
- */
- divisor = (gd->cpu_clk / 48000000L) - 1;
- cp->cp_sicr &= ~0x0000003F;
-
- switch (CFG_USB_BRGCLK) {
- case 1:
- cp->cp_brgc1 |= (divisor | CPM_BRG_EN);
- cp->cp_sicr &= ~0x2F;
- break;
- case 2:
- cp->cp_brgc2 |= (divisor | CPM_BRG_EN);
- cp->cp_sicr |= 0x00000009;
- break;
- case 3:
- cp->cp_brgc3 |= (divisor | CPM_BRG_EN);
- cp->cp_sicr |= 0x00000012;
- break;
- case 4:
- cp->cp_brgc4 = (divisor | CPM_BRG_EN);
- cp->cp_sicr |= 0x0000001B;
- break;
- default:
- udc_state = STATE_ERROR;
- break;
- }
-
-#else
-#error "CFG_USB_EXTC_CLK or CFG_USB_BRGCLK must be defined"
-#endif
-
-}
-
-/* mpc8xx_udc_cbd_attach
- *
- * attach a cbd to and endpoint
- */
-static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size)
-{
-
- if (!tx_cbd[ep] || !rx_cbd[ep] || ep >= MAX_ENDPOINTS) {
- udc_state = STATE_ERROR;
- return;
- }
-
- if (tx_size > USB_MAX_PKT || rx_size > USB_MAX_PKT ||
- (!tx_size && !rx_size)) {
- udc_state = STATE_ERROR;
- return;
- }
-
- /* Attach CBD to appropiate Parameter RAM Endpoint data structure */
- if (rx_size) {
- endpoints[ep]->rbase = (u32) rx_cbd[rx_ct];
- endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct];
- rx_ct++;
-
- if (!ep) {
-
- endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct];
- rx_cbd[rx_ct]->cbd_sc |= RX_BD_W;
- rx_ct++;
-
- } else {
- rx_ct += 2;
- endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct];
- rx_cbd[rx_ct]->cbd_sc |= RX_BD_W;
- rx_ct++;
- }
-
- /* Where we expect to RX data on this endpoint */
- ep_ref[ep].prx = rx_cbd[rx_ct - 1];
- } else {
-
- ep_ref[ep].prx = 0;
- endpoints[ep]->rbase = 0;
- endpoints[ep]->rbptr = 0;
- }
-
- if (tx_size) {
- endpoints[ep]->tbase = (u32) tx_cbd[tx_ct];
- endpoints[ep]->tbptr = (u32) tx_cbd[tx_ct];
- tx_ct++;
- } else {
- endpoints[ep]->tbase = 0;
- endpoints[ep]->tbptr = 0;
- }
-
- endpoints[ep]->tstate = 0;
- endpoints[ep]->tbcnt = 0;
- endpoints[ep]->mrblr = EP_MAX_PKT;
- endpoints[ep]->rfcr = 0x18;
- endpoints[ep]->tfcr = 0x18;
- ep_ref[ep].sc |= EP_ATTACHED;
-
- DBG ("ep %d rbase 0x%08x rbptr 0x%08x tbase 0x%08x tbptr 0x%08x prx = %p\n",
- ep, endpoints[ep]->rbase, endpoints[ep]->rbptr,
- endpoints[ep]->tbase, endpoints[ep]->tbptr,
- ep_ref[ep].prx);
-
- return;
-}
-
-/* mpc8xx_udc_cbd_init
- *
- * Allocate space for a cbd and allocate TX/RX data space
- */
-static void mpc8xx_udc_cbd_init (void)
-{
- int i = 0;
-
- for (; i < TX_RING_SIZE; i++) {
- tx_cbd[i] = (cbd_t *)
- mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int));
- }
-
- for (i = 0; i < RX_RING_SIZE; i++) {
- rx_cbd[i] = (cbd_t *)
- mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int));
- }
-
- for (i = 0; i < TX_RING_SIZE; i++) {
- tx_cbd[i]->cbd_bufaddr =
- mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int));
-
- tx_cbd[i]->cbd_sc = (TX_BD_I | TX_BD_W);
- tx_cbd[i]->cbd_datlen = 0x0000;
- }
-
-
- for (i = 0; i < RX_RING_SIZE; i++) {
- rx_cbd[i]->cbd_bufaddr =
- mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int));
- rx_cbd[i]->cbd_sc = (RX_BD_I | RX_BD_E);
- rx_cbd[i]->cbd_datlen = 0x0000;
-
- }
-
- return;
-}
-
-/* mpc8xx_udc_endpoint_init
- *
- * Attach an endpoint to some dpram
- */
-static void mpc8xx_udc_endpoint_init (void)
-{
- int i = 0;
-
- for (; i < MAX_ENDPOINTS; i++) {
- endpoints[i] = (usb_epb_t *)
- mpc8xx_udc_alloc (sizeof (usb_epb_t), 32);
- }
-}
-
-/* mpc8xx_udc_alloc
- *
- * Grab the address of some dpram
- */
-static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment)
-{
- u32 retaddr = address_base;
-
- while (retaddr % alignment) {
- retaddr++;
- }
- address_base += data_size;
-
- return retaddr;
-}
-
-#endif /* CONFIG_MPC885_FAMILY && CONFIG_USB_DEVICE) */
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Gerry Hamel, geh@ti.com, Texas Instruments
- *
- * Based on
- * linux/drivers/usb/device/bi/omap.c
- * TI OMAP1510 USB bus interface driver
- *
- * Author: MontaVista Software, Inc.
- * source@mvista.com
- * (C) Copyright 2002
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-
-#if defined(CONFIG_OMAP1510) && defined(CONFIG_USB_DEVICE)
-
-#include <asm/io.h>
-#ifdef CONFIG_OMAP_SX1
-#include <i2c.h>
-#endif
-
-#include "usbdcore.h"
-#include "usbdcore_omap1510.h"
-#include "usbdcore_ep0.h"
-
-
-#define UDC_INIT_MDELAY 80 /* Device settle delay */
-#define UDC_MAX_ENDPOINTS 31 /* Number of endpoints on this UDC */
-
-/* Some kind of debugging output... */
-#if 1
-#define UDCDBG(str)
-#define UDCDBGA(fmt,args...)
-#else /* The bugs still exists... */
-#define UDCDBG(str) serial_printf("[%s] %s:%d: " str "\n", __FILE__,__FUNCTION__,__LINE__)
-#define UDCDBGA(fmt,args...) serial_printf("[%s] %s:%d: " fmt "\n", __FILE__,__FUNCTION__,__LINE__, ##args)
-#endif
-
-#if 1
-#define UDCREG(name)
-#define UDCREGL(name)
-#else /* The bugs still exists... */
-#define UDCREG(name) serial_printf("%s():%d: %s[%08x]=%.4x\n",__FUNCTION__,__LINE__, (#name), name, inw(name)) /* For 16-bit regs */
-#define UDCREGL(name) serial_printf("%s():%d: %s[%08x]=%.8x\n",__FUNCTION__,__LINE__, (#name), name, inl(name)) /* For 32-bit regs */
-#endif
-
-
-static struct urb *ep0_urb = NULL;
-
-static struct usb_device_instance *udc_device; /* Used in interrupt handler */
-static u16 udc_devstat = 0; /* UDC status (DEVSTAT) */
-static u32 udc_interrupts = 0;
-
-static void udc_stall_ep (unsigned int ep_addr);
-
-
-static struct usb_endpoint_instance *omap1510_find_ep (int ep)
-{
- int i;
-
- for (i = 0; i < udc_device->bus->max_endpoints; i++) {
- if (udc_device->bus->endpoint_array[i].endpoint_address == ep)
- return &udc_device->bus->endpoint_array[i];
- }
- return NULL;
-}
-
-/* ************************************************************************** */
-/* IO
- */
-
-/*
- * omap1510_prepare_endpoint_for_rx
- *
- * This function implements TRM Figure 14-11.
- *
- * The endpoint to prepare for transfer is specified as a physical endpoint
- * number. For OUT (rx) endpoints 1 through 15, the corresponding endpoint
- * configuration register is checked to see if the endpoint is ISO or not.
- * If the OUT endpoint is valid and is non-ISO then its FIFO is enabled.
- * No action is taken for endpoint 0 or for IN (tx) endpoints 16 through 30.
- */
-static void omap1510_prepare_endpoint_for_rx (int ep_addr)
-{
- int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
-
- UDCDBGA ("omap1510_prepare_endpoint %x", ep_addr);
- if (((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)) {
- if ((inw (UDC_EP_RX (ep_num)) &
- (UDC_EPn_RX_Valid | UDC_EPn_RX_Iso)) ==
- UDC_EPn_RX_Valid) {
- /* rx endpoint is valid, non-ISO, so enable its FIFO */
- outw (UDC_EP_Sel | ep_num, UDC_EP_NUM);
- outw (UDC_Set_FIFO_En, UDC_CTRL);
- outw (0, UDC_EP_NUM);
- }
- }
-}
-
-/* omap1510_configure_endpoints
- *
- * This function implements TRM Figure 14-10.
- */
-static void omap1510_configure_endpoints (struct usb_device_instance *device)
-{
- int ep;
- struct usb_bus_instance *bus;
- struct usb_endpoint_instance *endpoint;
- unsigned short ep_ptr;
- unsigned short ep_size;
- unsigned short ep_isoc;
- unsigned short ep_doublebuffer;
- int ep_addr;
- int packet_size;
- int buffer_size;
- int attributes;
-
- bus = device->bus;
-
- /* There is a dedicated 2048 byte buffer for USB packets that may be
- * arbitrarily partitioned among the endpoints on 8-byte boundaries.
- * The first 8 bytes are reserved for receiving setup packets on
- * endpoint 0.
- */
- ep_ptr = 8; /* reserve the first 8 bytes for the setup fifo */
-
- for (ep = 0; ep < bus->max_endpoints; ep++) {
- endpoint = bus->endpoint_array + ep;
- ep_addr = endpoint->endpoint_address;
- if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
- /* IN endpoint */
- packet_size = endpoint->tx_packetSize;
- attributes = endpoint->tx_attributes;
- } else {
- /* OUT endpoint */
- packet_size = endpoint->rcv_packetSize;
- attributes = endpoint->rcv_attributes;
- }
-
- switch (packet_size) {
- case 0:
- ep_size = 0;
- break;
- case 8:
- ep_size = 0;
- break;
- case 16:
- ep_size = 1;
- break;
- case 32:
- ep_size = 2;
- break;
- case 64:
- ep_size = 3;
- break;
- case 128:
- ep_size = 4;
- break;
- case 256:
- ep_size = 5;
- break;
- case 512:
- ep_size = 6;
- break;
- default:
- UDCDBGA ("ep 0x%02x has bad packet size %d",
- ep_addr, packet_size);
- packet_size = 0;
- ep_size = 0;
- break;
- }
-
- switch (attributes & USB_ENDPOINT_XFERTYPE_MASK) {
- case USB_ENDPOINT_XFER_CONTROL:
- case USB_ENDPOINT_XFER_BULK:
- case USB_ENDPOINT_XFER_INT:
- default:
- /* A non-isochronous endpoint may optionally be
- * double-buffered. For now we disable
- * double-buffering.
- */
- ep_doublebuffer = 0;
- ep_isoc = 0;
- if (packet_size > 64)
- packet_size = 0;
- if (!ep || !ep_doublebuffer)
- buffer_size = packet_size;
- else
- buffer_size = packet_size * 2;
- break;
- case USB_ENDPOINT_XFER_ISOC:
- /* Isochronous endpoints are always double-
- * buffered, but the double-buffering bit
- * in the endpoint configuration register
- * becomes the msb of the endpoint size so we
- * set the double-buffering flag to zero.
- */
- ep_doublebuffer = 0;
- ep_isoc = 1;
- buffer_size = packet_size * 2;
- break;
- }
-
- /* check to see if our packet buffer RAM is exhausted */
- if ((ep_ptr + buffer_size) > 2048) {
- UDCDBGA ("out of packet RAM for ep 0x%02x buf size %d", ep_addr, buffer_size);
- buffer_size = packet_size = 0;
- }
-
- /* force a default configuration for endpoint 0 since it is
- * always enabled
- */
- if (!ep && ((packet_size < 8) || (packet_size > 64))) {
- buffer_size = packet_size = 64;
- ep_size = 3;
- }
-
- if (!ep) {
- /* configure endpoint 0 */
- outw ((ep_size << 12) | (ep_ptr >> 3), UDC_EP0);
- /*UDCDBGA("ep 0 buffer offset 0x%03x packet size 0x%03x", */
- /* ep_ptr, packet_size); */
- } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
- /* IN endpoint */
- if (packet_size) {
- outw ((1 << 15) | (ep_doublebuffer << 14) |
- (ep_size << 12) | (ep_isoc << 11) |
- (ep_ptr >> 3),
- UDC_EP_TX (ep_addr &
- USB_ENDPOINT_NUMBER_MASK));
- UDCDBGA ("IN ep %d buffer offset 0x%03x"
- " packet size 0x%03x",
- ep_addr & USB_ENDPOINT_NUMBER_MASK,
- ep_ptr, packet_size);
- } else {
- outw (0,
- UDC_EP_TX (ep_addr &
- USB_ENDPOINT_NUMBER_MASK));
- }
- } else {
- /* OUT endpoint */
- if (packet_size) {
- outw ((1 << 15) | (ep_doublebuffer << 14) |
- (ep_size << 12) | (ep_isoc << 11) |
- (ep_ptr >> 3),
- UDC_EP_RX (ep_addr &
- USB_ENDPOINT_NUMBER_MASK));
- UDCDBGA ("OUT ep %d buffer offset 0x%03x"
- " packet size 0x%03x",
- ep_addr & USB_ENDPOINT_NUMBER_MASK,
- ep_ptr, packet_size);
- } else {
- outw (0,
- UDC_EP_RX (ep_addr &
- USB_ENDPOINT_NUMBER_MASK));
- }
- }
- ep_ptr += buffer_size;
- }
-}
-
-/* omap1510_deconfigure_device
- *
- * This function balances omap1510_configure_device.
- */
-static void omap1510_deconfigure_device (void)
-{
- int epnum;
-
- UDCDBG ("clear Cfg_Lock");
- outw (inw (UDC_SYSCON1) & ~UDC_Cfg_Lock, UDC_SYSCON1);
- UDCREG (UDC_SYSCON1);
-
- /* deconfigure all endpoints */
- for (epnum = 1; epnum <= 15; epnum++) {
- outw (0, UDC_EP_RX (epnum));
- outw (0, UDC_EP_TX (epnum));
- }
-}
-
-/* omap1510_configure_device
- *
- * This function implements TRM Figure 14-9.
- */
-static void omap1510_configure_device (struct usb_device_instance *device)
-{
- omap1510_configure_endpoints (device);
-
-
- /* Figure 14-9 indicates we should enable interrupts here, but we have
- * other routines (udc_all_interrupts, udc_suspended_interrupts) to
- * do that.
- */
-
- UDCDBG ("set Cfg_Lock");
- outw (inw (UDC_SYSCON1) | UDC_Cfg_Lock, UDC_SYSCON1);
- UDCREG (UDC_SYSCON1);
-}
-
-/* omap1510_write_noniso_tx_fifo
- *
- * This function implements TRM Figure 14-30.
- *
- * If the endpoint has an active tx_urb, then the next packet of data from the
- * URB is written to the tx FIFO. The total amount of data in the urb is given
- * by urb->actual_length. The maximum amount of data that can be sent in any
- * one packet is given by endpoint->tx_packetSize. The number of data bytes
- * from this URB that have already been transmitted is given by endpoint->sent.
- * endpoint->last is updated by this routine with the number of data bytes
- * transmitted in this packet.
- *
- * In accordance with Figure 14-30, the EP_NUM register must already have been
- * written with the value to select the appropriate tx FIFO before this routine
- * is called.
- */
-static void omap1510_write_noniso_tx_fifo (struct usb_endpoint_instance
- *endpoint)
-{
- struct urb *urb = endpoint->tx_urb;
-
- if (urb) {
- unsigned int last, i;
-
- UDCDBGA ("urb->buffer %p, buffer_length %d, actual_length %d",
- urb->buffer, urb->buffer_length, urb->actual_length);
- if ((last =
- MIN (urb->actual_length - endpoint->sent,
- endpoint->tx_packetSize))) {
- u8 *cp = urb->buffer + endpoint->sent;
-
- UDCDBGA ("endpoint->sent %d, tx_packetSize %d, last %d", endpoint->sent, endpoint->tx_packetSize, last);
-
- if (((u32) cp & 1) == 0) { /* word aligned? */
- outsw (UDC_DATA, cp, last >> 1);
- } else { /* byte aligned. */
- for (i = 0; i < (last >> 1); i++) {
- u16 w = ((u16) cp[2 * i + 1] << 8) |
- (u16) cp[2 * i];
- outw (w, UDC_DATA);
- }
- }
- if (last & 1) {
- outb (*(cp + last - 1), UDC_DATA);
- }
- }
- endpoint->last = last;
- }
-}
-
-/* omap1510_read_noniso_rx_fifo
- *
- * This function implements TRM Figure 14-28.
- *
- * If the endpoint has an active rcv_urb, then the next packet of data is read
- * from the rcv FIFO and written to rcv_urb->buffer at offset
- * rcv_urb->actual_length to append the packet data to the data from any
- * previous packets for this transfer. We assume that there is sufficient room
- * left in the buffer to hold an entire packet of data.
- *
- * The return value is the number of bytes read from the FIFO for this packet.
- *
- * In accordance with Figure 14-28, the EP_NUM register must already have been
- * written with the value to select the appropriate rcv FIFO before this routine
- * is called.
- */
-static int omap1510_read_noniso_rx_fifo (struct usb_endpoint_instance
- *endpoint)
-{
- struct urb *urb = endpoint->rcv_urb;
- int len = 0;
-
- if (urb) {
- len = inw (UDC_RXFSTAT);
-
- if (len) {
- unsigned char *cp = urb->buffer + urb->actual_length;
-
- insw (UDC_DATA, cp, len >> 1);
- if (len & 1)
- *(cp + len - 1) = inb (UDC_DATA);
- }
- }
- return len;
-}
-
-/* omap1510_prepare_for_control_write_status
- *
- * This function implements TRM Figure 14-17.
- *
- * We have to deal here with non-autodecoded control writes that haven't already
- * been dealt with by ep0_recv_setup. The non-autodecoded standard control
- * write requests are: set/clear endpoint feature, set configuration, set
- * interface, and set descriptor. ep0_recv_setup handles set/clear requests for
- * ENDPOINT_HALT by halting the endpoint for a set request and resetting the
- * endpoint for a clear request. ep0_recv_setup returns an error for
- * SET_DESCRIPTOR requests which causes them to be terminated with a stall by
- * the setup handler. A SET_INTERFACE request is handled by ep0_recv_setup by
- * generating a DEVICE_SET_INTERFACE event. This leaves only the
- * SET_CONFIGURATION event for us to deal with here.
- *
- */
-static void omap1510_prepare_for_control_write_status (struct urb *urb)
-{
- struct usb_device_request *request = &urb->device_request;;
-
- /* check for a SET_CONFIGURATION request */
- if (request->bRequest == USB_REQ_SET_CONFIGURATION) {
- int configuration = le16_to_cpu (request->wValue) & 0xff;
- unsigned short devstat = inw (UDC_DEVSTAT);
-
- if ((devstat & (UDC_ADD | UDC_CFG)) == UDC_ADD) {
- /* device is currently in ADDRESSED state */
- if (configuration) {
- /* Assume the specified non-zero configuration
- * value is valid and switch to the CONFIGURED
- * state.
- */
- outw (UDC_Dev_Cfg, UDC_SYSCON2);
- }
- } else if ((devstat & UDC_CFG) == UDC_CFG) {
- /* device is currently in CONFIGURED state */
- if (!configuration) {
- /* Switch to ADDRESSED state. */
- outw (UDC_Clr_Cfg, UDC_SYSCON2);
- }
- }
- }
-
- /* select EP0 tx FIFO */
- outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
- /* clear endpoint (no data bytes in status stage) */
- outw (UDC_Clr_EP, UDC_CTRL);
- /* enable the EP0 tx FIFO */
- outw (UDC_Set_FIFO_En, UDC_CTRL);
- /* deselect the endpoint */
- outw (UDC_EP_Dir, UDC_EP_NUM);
-}
-
-/* udc_state_transition_up
- * udc_state_transition_down
- *
- * Helper functions to implement device state changes. The device states and
- * the events that transition between them are:
- *
- * STATE_ATTACHED
- * || /\
- * \/ ||
- * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET
- * || /\
- * \/ ||
- * STATE_POWERED
- * || /\
- * \/ ||
- * DEVICE_RESET DEVICE_POWER_INTERRUPTION
- * || /\
- * \/ ||
- * STATE_DEFAULT
- * || /\
- * \/ ||
- * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET
- * || /\
- * \/ ||
- * STATE_ADDRESSED
- * || /\
- * \/ ||
- * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED
- * || /\
- * \/ ||
- * STATE_CONFIGURED
- *
- * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED
- * to STATE_CONFIGURED) from the specified initial state to the specified final
- * state, passing through each intermediate state on the way. If the initial
- * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then
- * no state transitions will take place.
- *
- * udc_state_transition_down transitions down (in the direction from
- * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the
- * specified final state, passing through each intermediate state on the way.
- * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final
- * state, then no state transitions will take place.
- *
- * These functions must only be called with interrupts disabled.
- */
-static void udc_state_transition_up (usb_device_state_t initial,
- usb_device_state_t final)
-{
- if (initial < final) {
- switch (initial) {
- case STATE_ATTACHED:
- usbd_device_event_irq (udc_device,
- DEVICE_HUB_CONFIGURED, 0);
- if (final == STATE_POWERED)
- break;
- case STATE_POWERED:
- usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
- if (final == STATE_DEFAULT)
- break;
- case STATE_DEFAULT:
- usbd_device_event_irq (udc_device,
- DEVICE_ADDRESS_ASSIGNED, 0);
- if (final == STATE_ADDRESSED)
- break;
- case STATE_ADDRESSED:
- usbd_device_event_irq (udc_device, DEVICE_CONFIGURED,
- 0);
- case STATE_CONFIGURED:
- break;
- default:
- break;
- }
- }
-}
-
-static void udc_state_transition_down (usb_device_state_t initial,
- usb_device_state_t final)
-{
- if (initial > final) {
- switch (initial) {
- case STATE_CONFIGURED:
- usbd_device_event_irq (udc_device, DEVICE_DE_CONFIGURED, 0);
- if (final == STATE_ADDRESSED)
- break;
- case STATE_ADDRESSED:
- usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
- if (final == STATE_DEFAULT)
- break;
- case STATE_DEFAULT:
- usbd_device_event_irq (udc_device, DEVICE_POWER_INTERRUPTION, 0);
- if (final == STATE_POWERED)
- break;
- case STATE_POWERED:
- usbd_device_event_irq (udc_device, DEVICE_HUB_RESET, 0);
- case STATE_ATTACHED:
- break;
- default:
- break;
- }
- }
-}
-
-/* Handle all device state changes.
- * This function implements TRM Figure 14-21.
- */
-static void omap1510_udc_state_changed (void)
-{
- u16 bits;
- u16 devstat = inw (UDC_DEVSTAT);
-
- UDCDBGA ("state changed, devstat %x, old %x", devstat, udc_devstat);
-
- bits = devstat ^ udc_devstat;
- if (bits) {
- if (bits & UDC_ATT) {
- if (devstat & UDC_ATT) {
- UDCDBG ("device attached and powered");
- udc_state_transition_up (udc_device->device_state, STATE_POWERED);
- } else {
- UDCDBG ("device detached or unpowered");
- udc_state_transition_down (udc_device->device_state, STATE_ATTACHED);
- }
- }
- if (bits & UDC_USB_Reset) {
- if (devstat & UDC_USB_Reset) {
- UDCDBG ("device reset in progess");
- udc_state_transition_down (udc_device->device_state, STATE_POWERED);
- } else {
- UDCDBG ("device reset completed");
- }
- }
- if (bits & UDC_DEF) {
- if (devstat & UDC_DEF) {
- UDCDBG ("device entering default state");
- udc_state_transition_up (udc_device->device_state, STATE_DEFAULT);
- } else {
- UDCDBG ("device leaving default state");
- udc_state_transition_down (udc_device->device_state, STATE_POWERED);
- }
- }
- if (bits & UDC_SUS) {
- if (devstat & UDC_SUS) {
- UDCDBG ("entering suspended state");
- usbd_device_event_irq (udc_device, DEVICE_BUS_INACTIVE, 0);
- } else {
- UDCDBG ("leaving suspended state");
- usbd_device_event_irq (udc_device, DEVICE_BUS_ACTIVITY, 0);
- }
- }
- if (bits & UDC_R_WK_OK) {
- UDCDBGA ("remote wakeup %s", (devstat & UDC_R_WK_OK)
- ? "enabled" : "disabled");
- }
- if (bits & UDC_ADD) {
- if (devstat & UDC_ADD) {
- UDCDBG ("default -> addressed");
- udc_state_transition_up (udc_device->device_state, STATE_ADDRESSED);
- } else {
- UDCDBG ("addressed -> default");
- udc_state_transition_down (udc_device->device_state, STATE_DEFAULT);
- }
- }
- if (bits & UDC_CFG) {
- if (devstat & UDC_CFG) {
- UDCDBG ("device configured");
- /* The ep0_recv_setup function generates the
- * DEVICE_CONFIGURED event when a
- * USB_REQ_SET_CONFIGURATION setup packet is
- * received, so we should already be in the
- * state STATE_CONFIGURED.
- */
- udc_state_transition_up (udc_device->device_state, STATE_CONFIGURED);
- } else {
- UDCDBG ("device deconfigured");
- udc_state_transition_down (udc_device->device_state, STATE_ADDRESSED);
- }
- }
- }
-
- /* Clear interrupt source */
- outw (UDC_DS_Chg, UDC_IRQ_SRC);
-
- /* Save current DEVSTAT */
- udc_devstat = devstat;
-}
-
-/* Handle SETUP USB interrupt.
- * This function implements TRM Figure 14-14.
- */
-static void omap1510_udc_setup (struct usb_endpoint_instance *endpoint)
-{
- UDCDBG ("-> Entering device setup");
-
- do {
- const int setup_pktsize = 8;
- unsigned char *datap =
- (unsigned char *) &ep0_urb->device_request;
-
- /* Gain access to EP 0 setup FIFO */
- outw (UDC_Setup_Sel, UDC_EP_NUM);
-
- /* Read control request data */
- insb (UDC_DATA, datap, setup_pktsize);
-
- UDCDBGA ("EP0 setup read [%x %x %x %x %x %x %x %x]",
- *(datap + 0), *(datap + 1), *(datap + 2),
- *(datap + 3), *(datap + 4), *(datap + 5),
- *(datap + 6), *(datap + 7));
-
- /* Reset EP0 setup FIFO */
- outw (0, UDC_EP_NUM);
- } while (inw (UDC_IRQ_SRC) & UDC_Setup);
-
- /* Try to process setup packet */
- if (ep0_recv_setup (ep0_urb)) {
- /* Not a setup packet, stall next EP0 transaction */
- udc_stall_ep (0);
- UDCDBG ("can't parse setup packet, still waiting for setup");
- return;
- }
-
- /* Check direction */
- if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK)
- == USB_REQ_HOST2DEVICE) {
- UDCDBG ("control write on EP0");
- if (le16_to_cpu (ep0_urb->device_request.wLength)) {
- /* We don't support control write data stages.
- * The only standard control write request with a data
- * stage is SET_DESCRIPTOR, and ep0_recv_setup doesn't
- * support that so we just stall those requests. A
- * function driver might support a non-standard
- * write request with a data stage, but it isn't
- * obvious what we would do with the data if we read it
- * so we'll just stall it. It seems like the API isn't
- * quite right here.
- */
-#if 0
- /* Here is what we would do if we did support control
- * write data stages.
- */
- ep0_urb->actual_length = 0;
- outw (0, UDC_EP_NUM);
- /* enable the EP0 rx FIFO */
- outw (UDC_Set_FIFO_En, UDC_CTRL);
-#else
- /* Stall this request */
- UDCDBG ("Stalling unsupported EP0 control write data "
- "stage.");
- udc_stall_ep (0);
-#endif
- } else {
- omap1510_prepare_for_control_write_status (ep0_urb);
- }
- } else {
- UDCDBG ("control read on EP0");
- /* The ep0_recv_setup function has already placed our response
- * packet data in ep0_urb->buffer and the packet length in
- * ep0_urb->actual_length.
- */
- endpoint->tx_urb = ep0_urb;
- endpoint->sent = 0;
- /* select the EP0 tx FIFO */
- outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
- /* Write packet data to the FIFO. omap1510_write_noniso_tx_fifo
- * will update endpoint->last with the number of bytes written
- * to the FIFO.
- */
- omap1510_write_noniso_tx_fifo (endpoint);
- /* enable the FIFO to start the packet transmission */
- outw (UDC_Set_FIFO_En, UDC_CTRL);
- /* deselect the EP0 tx FIFO */
- outw (UDC_EP_Dir, UDC_EP_NUM);
- }
-
- UDCDBG ("<- Leaving device setup");
-}
-
-/* Handle endpoint 0 RX interrupt
- * This routine implements TRM Figure 14-16.
- */
-static void omap1510_udc_ep0_rx (struct usb_endpoint_instance *endpoint)
-{
- unsigned short status;
-
- UDCDBG ("RX on EP0");
- /* select EP0 rx FIFO */
- outw (UDC_EP_Sel, UDC_EP_NUM);
-
- status = inw (UDC_STAT_FLG);
-
- if (status & UDC_ACK) {
- /* Check direction */
- if ((ep0_urb->device_request.bmRequestType
- & USB_REQ_DIRECTION_MASK) == USB_REQ_HOST2DEVICE) {
- /* This rx interrupt must be for a control write data
- * stage packet.
- *
- * We don't support control write data stages.
- * We should never end up here.
- */
-
- /* clear the EP0 rx FIFO */
- outw (UDC_Clr_EP, UDC_CTRL);
-
- /* deselect the EP0 rx FIFO */
- outw (0, UDC_EP_NUM);
-
- UDCDBG ("Stalling unexpected EP0 control write "
- "data stage packet");
- udc_stall_ep (0);
- } else {
- /* This rx interrupt must be for a control read status
- * stage packet.
- */
- UDCDBG ("ACK on EP0 control read status stage packet");
- /* deselect EP0 rx FIFO */
- outw (0, UDC_EP_NUM);
- }
- } else if (status & UDC_STALL) {
- UDCDBG ("EP0 stall during RX");
- /* deselect EP0 rx FIFO */
- outw (0, UDC_EP_NUM);
- } else {
- /* deselect EP0 rx FIFO */
- outw (0, UDC_EP_NUM);
- }
-}
-
-/* Handle endpoint 0 TX interrupt
- * This routine implements TRM Figure 14-18.
- */
-static void omap1510_udc_ep0_tx (struct usb_endpoint_instance *endpoint)
-{
- unsigned short status;
- struct usb_device_request *request = &ep0_urb->device_request;
-
- UDCDBG ("TX on EP0");
- /* select EP0 TX FIFO */
- outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
-
- status = inw (UDC_STAT_FLG);
- if (status & UDC_ACK) {
- /* Check direction */
- if ((request->bmRequestType & USB_REQ_DIRECTION_MASK) ==
- USB_REQ_HOST2DEVICE) {
- /* This tx interrupt must be for a control write status
- * stage packet.
- */
- UDCDBG ("ACK on EP0 control write status stage packet");
- /* deselect EP0 TX FIFO */
- outw (UDC_EP_Dir, UDC_EP_NUM);
- } else {
- /* This tx interrupt must be for a control read data
- * stage packet.
- */
- int wLength = le16_to_cpu (request->wLength);
-
- /* Update our count of bytes sent so far in this
- * transfer.
- */
- endpoint->sent += endpoint->last;
-
- /* We are finished with this transfer if we have sent
- * all of the bytes in our tx urb (urb->actual_length)
- * unless we need a zero-length terminating packet. We
- * need a zero-length terminating packet if we returned
- * fewer bytes than were requested (wLength) by the host,
- * and the number of bytes we returned is an exact
- * multiple of the packet size endpoint->tx_packetSize.
- */
- if ((endpoint->sent == ep0_urb->actual_length)
- && ((ep0_urb->actual_length == wLength)
- || (endpoint->last !=
- endpoint->tx_packetSize))) {
- /* Done with control read data stage. */
- UDCDBG ("control read data stage complete");
- /* deselect EP0 TX FIFO */
- outw (UDC_EP_Dir, UDC_EP_NUM);
- /* select EP0 RX FIFO to prepare for control
- * read status stage.
- */
- outw (UDC_EP_Sel, UDC_EP_NUM);
- /* clear the EP0 RX FIFO */
- outw (UDC_Clr_EP, UDC_CTRL);
- /* enable the EP0 RX FIFO */
- outw (UDC_Set_FIFO_En, UDC_CTRL);
- /* deselect the EP0 RX FIFO */
- outw (0, UDC_EP_NUM);
- } else {
- /* We still have another packet of data to send
- * in this control read data stage or else we
- * need a zero-length terminating packet.
- */
- UDCDBG ("ACK control read data stage packet");
- omap1510_write_noniso_tx_fifo (endpoint);
- /* enable the EP0 tx FIFO to start transmission */
- outw (UDC_Set_FIFO_En, UDC_CTRL);
- /* deselect EP0 TX FIFO */
- outw (UDC_EP_Dir, UDC_EP_NUM);
- }
- }
- } else if (status & UDC_STALL) {
- UDCDBG ("EP0 stall during TX");
- /* deselect EP0 TX FIFO */
- outw (UDC_EP_Dir, UDC_EP_NUM);
- } else {
- /* deselect EP0 TX FIFO */
- outw (UDC_EP_Dir, UDC_EP_NUM);
- }
-}
-
-/* Handle RX transaction on non-ISO endpoint.
- * This function implements TRM Figure 14-27.
- * The ep argument is a physical endpoint number for a non-ISO OUT endpoint
- * in the range 1 to 15.
- */
-static void omap1510_udc_epn_rx (int ep)
-{
- unsigned short status;
-
- /* Check endpoint status */
- status = inw (UDC_STAT_FLG);
-
- if (status & UDC_ACK) {
- int nbytes;
- struct usb_endpoint_instance *endpoint =
- omap1510_find_ep (ep);
-
- nbytes = omap1510_read_noniso_rx_fifo (endpoint);
- usbd_rcv_complete (endpoint, nbytes, 0);
-
- /* enable rx FIFO to prepare for next packet */
- outw (UDC_Set_FIFO_En, UDC_CTRL);
- } else if (status & UDC_STALL) {
- UDCDBGA ("STALL on RX endpoint %d", ep);
- } else if (status & UDC_NAK) {
- UDCDBGA ("NAK on RX ep %d", ep);
- } else {
- serial_printf ("omap-bi: RX on ep %d with status %x", ep,
- status);
- }
-}
-
-/* Handle TX transaction on non-ISO endpoint.
- * This function implements TRM Figure 14-29.
- * The ep argument is a physical endpoint number for a non-ISO IN endpoint
- * in the range 16 to 30.
- */
-static void omap1510_udc_epn_tx (int ep)
-{
- unsigned short status;
-
- /*serial_printf("omap1510_udc_epn_tx( %x )\n",ep); */
-
- /* Check endpoint status */
- status = inw (UDC_STAT_FLG);
-
- if (status & UDC_ACK) {
- struct usb_endpoint_instance *endpoint =
- omap1510_find_ep (ep);
-
- /* We need to transmit a terminating zero-length packet now if
- * we have sent all of the data in this URB and the transfer
- * size was an exact multiple of the packet size.
- */
- if (endpoint->tx_urb
- && (endpoint->last == endpoint->tx_packetSize)
- && (endpoint->tx_urb->actual_length - endpoint->sent -
- endpoint->last == 0)) {
- /* Prepare to transmit a zero-length packet. */
- endpoint->sent += endpoint->last;
- /* write 0 bytes of data to FIFO */
- omap1510_write_noniso_tx_fifo (endpoint);
- /* enable tx FIFO to start transmission */
- outw (UDC_Set_FIFO_En, UDC_CTRL);
- } else if (endpoint->tx_urb
- && endpoint->tx_urb->actual_length) {
- /* retire the data that was just sent */
- usbd_tx_complete (endpoint);
- /* Check to see if we have more data ready to transmit
- * now.
- */
- if (endpoint->tx_urb
- && endpoint->tx_urb->actual_length) {
- /* write data to FIFO */
- omap1510_write_noniso_tx_fifo (endpoint);
- /* enable tx FIFO to start transmission */
- outw (UDC_Set_FIFO_En, UDC_CTRL);
- }
- }
- } else if (status & UDC_STALL) {
- UDCDBGA ("STALL on TX endpoint %d", ep);
- } else if (status & UDC_NAK) {
- UDCDBGA ("NAK on TX endpoint %d", ep);
- } else {
- /*serial_printf("omap-bi: TX on ep %d with status %x\n", ep, status); */
- }
-}
-
-
-/*
--------------------------------------------------------------------------------
-*/
-
-/* Handle general USB interrupts and dispatch according to type.
- * This function implements TRM Figure 14-13.
- */
-void omap1510_udc_irq (void)
-{
- u16 irq_src = inw (UDC_IRQ_SRC);
- int valid_irq = 0;
-
- if (!(irq_src & ~UDC_SOF_Flg)) /* ignore SOF interrupts ) */
- return;
-
- UDCDBGA ("< IRQ #%d start >- %x", udc_interrupts, irq_src);
- /*serial_printf("< IRQ #%d start >- %x\n", udc_interrupts, irq_src); */
-
- if (irq_src & UDC_DS_Chg) {
- /* Device status changed */
- omap1510_udc_state_changed ();
- valid_irq++;
- }
- if (irq_src & UDC_EP0_RX) {
- /* Endpoint 0 receive */
- outw (UDC_EP0_RX, UDC_IRQ_SRC); /* ack interrupt */
- omap1510_udc_ep0_rx (udc_device->bus->endpoint_array + 0);
- valid_irq++;
- }
- if (irq_src & UDC_EP0_TX) {
- /* Endpoint 0 transmit */
- outw (UDC_EP0_TX, UDC_IRQ_SRC); /* ack interrupt */
- omap1510_udc_ep0_tx (udc_device->bus->endpoint_array + 0);
- valid_irq++;
- }
- if (irq_src & UDC_Setup) {
- /* Device setup */
- omap1510_udc_setup (udc_device->bus->endpoint_array + 0);
- valid_irq++;
- }
- /*if (!valid_irq) */
- /* serial_printf("unknown interrupt, IRQ_SRC %.4x\n", irq_src); */
- UDCDBGA ("< IRQ #%d end >", udc_interrupts);
- udc_interrupts++;
-}
-
-/* This function implements TRM Figure 14-26. */
-void omap1510_udc_noniso_irq (void)
-{
- unsigned short epnum;
- unsigned short irq_src = inw (UDC_IRQ_SRC);
- int valid_irq = 0;
-
- if (!(irq_src & (UDC_EPn_RX | UDC_EPn_TX)))
- return;
-
- UDCDBGA ("non-ISO IRQ, IRQ_SRC %x", inw (UDC_IRQ_SRC));
-
- if (irq_src & UDC_EPn_RX) { /* Endpoint N OUT transaction */
- /* Determine the endpoint number for this interrupt */
- epnum = (inw (UDC_EPN_STAT) & 0x0f00) >> 8;
- UDCDBGA ("RX on ep %x", epnum);
-
- /* acknowledge interrupt */
- outw (UDC_EPn_RX, UDC_IRQ_SRC);
-
- if (epnum) {
- /* select the endpoint FIFO */
- outw (UDC_EP_Sel | epnum, UDC_EP_NUM);
-
- omap1510_udc_epn_rx (epnum);
-
- /* deselect the endpoint FIFO */
- outw (epnum, UDC_EP_NUM);
- }
- valid_irq++;
- }
- if (irq_src & UDC_EPn_TX) { /* Endpoint N IN transaction */
- /* Determine the endpoint number for this interrupt */
- epnum = (inw (UDC_EPN_STAT) & 0x000f) | USB_DIR_IN;
- UDCDBGA ("TX on ep %x", epnum);
-
- /* acknowledge interrupt */
- outw (UDC_EPn_TX, UDC_IRQ_SRC);
-
- if (epnum) {
- /* select the endpoint FIFO */
- outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM);
-
- omap1510_udc_epn_tx (epnum);
-
- /* deselect the endpoint FIFO */
- outw (UDC_EP_Dir | epnum, UDC_EP_NUM);
- }
- valid_irq++;
- }
- if (!valid_irq)
- serial_printf (": unknown non-ISO interrupt, IRQ_SRC %.4x\n",
- irq_src);
-}
-
-/*
--------------------------------------------------------------------------------
-*/
-
-
-/*
- * Start of public functions.
- */
-
-/* Called to start packet transmission. */
-void udc_endpoint_write (struct usb_endpoint_instance *endpoint)
-{
- unsigned short epnum =
- endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK;
-
- UDCDBGA ("Starting transmit on ep %x", epnum);
-
- if (endpoint->tx_urb) {
- /* select the endpoint FIFO */
- outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM);
- /* write data to FIFO */
- omap1510_write_noniso_tx_fifo (endpoint);
- /* enable tx FIFO to start transmission */
- outw (UDC_Set_FIFO_En, UDC_CTRL);
- /* deselect the endpoint FIFO */
- outw (UDC_EP_Dir | epnum, UDC_EP_NUM);
- }
-}
-
-/* Start to initialize h/w stuff */
-int udc_init (void)
-{
- u16 udc_rev;
- uchar value;
- ulong gpio;
- int i;
-
- /* Let the device settle down before we start */
- for (i = 0; i < UDC_INIT_MDELAY; i++) udelay(1000);
-
- udc_device = NULL;
-
- UDCDBG ("starting");
-
- /* Check peripheral reset. Must be 1 to make sure
- MPU TIPB peripheral reset is inactive */
- UDCREG (ARM_RSTCT2);
-
- /* Set and check clock control.
- * We might ought to be using the clock control API to do
- * this instead of fiddling with the clock registers directly
- * here.
- */
- outw ((1 << 4) | (1 << 5), CLOCK_CTRL);
- UDCREG (CLOCK_CTRL);
- /* Set and check APLL */
- outw (0x0008, APLL_CTRL);
- UDCREG (APLL_CTRL);
- /* Set and check DPLL */
- outw (0x2210, DPLL_CTRL);
- UDCREG (DPLL_CTRL);
- /* Set and check SOFT */
- outw ((1 << 4) | (1 << 3) | 1, SOFT_REQ);
- /* Short delay to wait for DPLL */
- udelay (1000);
-
- /* Print banner with device revision */
- udc_rev = inw (UDC_REV) & 0xff;
- printf ("USB: TI OMAP1510 USB function module rev %d.%d\n",
- udc_rev >> 4, udc_rev & 0xf);
-
-#ifdef CONFIG_OMAP_SX1
- i2c_read (0x32, 0x04, 1, &value, 1);
- value |= 0x04;
- i2c_write (0x32, 0x04, 1, &value, 1);
-
- i2c_read (0x32, 0x03, 1, &value, 1);
- value |= 0x01;
- i2c_write (0x32, 0x03, 1, &value, 1);
-
- gpio = inl(GPIO_PIN_CONTROL_REG);
- gpio |= 0x0002; /* A_IRDA_OFF */
- gpio |= 0x0800; /* A_SWITCH */
- gpio |= 0x8000; /* A_USB_ON */
- outl (gpio, GPIO_PIN_CONTROL_REG);
-
- gpio = inl(GPIO_DIR_CONTROL_REG);
- gpio &= ~0x0002; /* A_IRDA_OFF */
- gpio &= ~0x0800; /* A_SWITCH */
- gpio &= ~0x8000; /* A_USB_ON */
- outl (gpio, GPIO_DIR_CONTROL_REG);
-
- gpio = inl(GPIO_DATA_OUTPUT_REG);
- gpio |= 0x0002; /* A_IRDA_OFF */
- gpio &= ~0x0800; /* A_SWITCH */
- gpio &= ~0x8000; /* A_USB_ON */
- outl (gpio, GPIO_DATA_OUTPUT_REG);
-#endif
-
- /* The VBUS_MODE bit selects whether VBUS detection is done via
- * software (1) or hardware (0). When software detection is
- * selected, VBUS_CTRL selects whether USB is not connected (0)
- * or connected (1).
- */
- outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0);
- outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0);
- UDCREGL (FUNC_MUX_CTRL_0);
-
- /*
- * At this point, device is ready for configuration...
- */
-
- UDCDBG ("disable USB interrupts");
- outw (0, UDC_IRQ_EN);
- UDCREG (UDC_IRQ_EN);
-
- UDCDBG ("disable USB DMA");
- outw (0, UDC_DMA_IRQ_EN);
- UDCREG (UDC_DMA_IRQ_EN);
-
- UDCDBG ("initialize SYSCON1");
- outw (UDC_Self_Pwr | UDC_Pullup_En, UDC_SYSCON1);
- UDCREG (UDC_SYSCON1);
-
- return 0;
-}
-
-/* Stall endpoint */
-static void udc_stall_ep (unsigned int ep_addr)
-{
- /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
- int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
-
- UDCDBGA ("stall ep_addr %d", ep_addr);
-
- /* REVISIT?
- * The OMAP TRM section 14.2.4.2 says we must check that the FIFO
- * is empty before halting the endpoint. The current implementation
- * doesn't check that the FIFO is empty.
- */
-
- if (!ep_num) {
- outw (UDC_Stall_Cmd, UDC_SYSCON2);
- } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
- if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) {
- /* we have a valid rx endpoint, so halt it */
- outw (UDC_EP_Sel | ep_num, UDC_EP_NUM);
- outw (UDC_Set_Halt, UDC_CTRL);
- outw (ep_num, UDC_EP_NUM);
- }
- } else {
- if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) {
- /* we have a valid tx endpoint, so halt it */
- outw (UDC_EP_Sel | UDC_EP_Dir | ep_num, UDC_EP_NUM);
- outw (UDC_Set_Halt, UDC_CTRL);
- outw (ep_num, UDC_EP_NUM);
- }
- }
-}
-
-/* Reset endpoint */
-#if 0
-static void udc_reset_ep (unsigned int ep_addr)
-{
- /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
- int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
-
- UDCDBGA ("reset ep_addr %d", ep_addr);
-
- if (!ep_num) {
- /* control endpoint 0 can't be reset */
- } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
- UDCDBGA ("UDC_EP_RX(%d) = 0x%04x", ep_num,
- inw (UDC_EP_RX (ep_num)));
- if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) {
- /* we have a valid rx endpoint, so reset it */
- outw (ep_num | UDC_EP_Sel, UDC_EP_NUM);
- outw (UDC_Reset_EP, UDC_CTRL);
- outw (ep_num, UDC_EP_NUM);
- UDCDBGA ("OUT endpoint %d reset", ep_num);
- }
- } else {
- UDCDBGA ("UDC_EP_TX(%d) = 0x%04x", ep_num,
- inw (UDC_EP_TX (ep_num)));
- /* Resetting of tx endpoints seems to be causing the USB function
- * module to fail, which causes problems when the driver is
- * uninstalled. We'll skip resetting tx endpoints for now until
- * we figure out what the problem is.
- */
-#if 0
- if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) {
- /* we have a valid tx endpoint, so reset it */
- outw (ep_num | UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
- outw (UDC_Reset_EP, UDC_CTRL);
- outw (ep_num | UDC_EP_Dir, UDC_EP_NUM);
- UDCDBGA ("IN endpoint %d reset", ep_num);
- }
-#endif
- }
-}
-#endif
-
-/* ************************************************************************** */
-
-/**
- * udc_check_ep - check logical endpoint
- *
- * Return physical endpoint number to use for this logical endpoint or zero if not valid.
- */
-#if 0
-int udc_check_ep (int logical_endpoint, int packetsize)
-{
- if ((logical_endpoint == 0x80) ||
- ((logical_endpoint & 0x8f) != logical_endpoint)) {
- return 0;
- }
-
- switch (packetsize) {
- case 8:
- case 16:
- case 32:
- case 64:
- case 128:
- case 256:
- case 512:
- break;
- default:
- return 0;
- }
-
- return EP_ADDR_TO_PHYS_EP (logical_endpoint);
-}
-#endif
-
-/*
- * udc_setup_ep - setup endpoint
- *
- * Associate a physical endpoint with endpoint_instance
- */
-void udc_setup_ep (struct usb_device_instance *device,
- unsigned int ep, struct usb_endpoint_instance *endpoint)
-{
- UDCDBGA ("setting up endpoint addr %x", endpoint->endpoint_address);
-
- /* This routine gets called by bi_modinit for endpoint 0 and from
- * bi_config for all of the other endpoints. bi_config gets called
- * during the DEVICE_CREATE, DEVICE_CONFIGURED, and
- * DEVICE_SET_INTERFACE events. We need to reconfigure the OMAP packet
- * RAM after bi_config scans the selected device configuration and
- * initializes the endpoint structures, but before this routine enables
- * the OUT endpoint FIFOs. Since bi_config calls this routine in a
- * loop for endpoints 1 through UDC_MAX_ENDPOINTS, we reconfigure our
- * packet RAM here when ep==1.
- * I really hate to do this here, but it seems like the API exported
- * by the USB bus interface controller driver to the usbd-bi module
- * isn't quite right so there is no good place to do this.
- */
- if (ep == 1) {
- omap1510_deconfigure_device ();
- omap1510_configure_device (device);
- }
-
- if (endpoint && (ep < UDC_MAX_ENDPOINTS)) {
- int ep_addr = endpoint->endpoint_address;
-
- if (!ep_addr) {
- /* nothing to do for endpoint 0 */
- } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
- /* nothing to do for IN (tx) endpoints */
- } else { /* OUT (rx) endpoint */
- if (endpoint->rcv_packetSize) {
- /*struct urb* urb = &(urb_out_array[ep&0xFF]); */
- /*urb->endpoint = endpoint; */
- /*urb->device = device; */
- /*urb->buffer_length = sizeof(urb->buffer); */
-
- /*endpoint->rcv_urb = urb; */
- omap1510_prepare_endpoint_for_rx (ep_addr);
- }
- }
- }
-}
-
-/**
- * udc_disable_ep - disable endpoint
- * @ep:
- *
- * Disable specified endpoint
- */
-#if 0
-void udc_disable_ep (unsigned int ep_addr)
-{
- /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
- int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
- struct usb_endpoint_instance *endpoint = omap1510_find_ep (ep_addr); /*udc_device->bus->endpoint_array + ep; */
-
- UDCDBGA ("disable ep_addr %d", ep_addr);
-
- if (!ep_num) {
- /* nothing to do for endpoint 0 */ ;
- } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
- if (endpoint->tx_packetSize) {
- /* we have a valid tx endpoint */
- /*usbd_flush_tx(endpoint); */
- endpoint->tx_urb = NULL;
- }
- } else {
- if (endpoint->rcv_packetSize) {
- /* we have a valid rx endpoint */
- /*usbd_flush_rcv(endpoint); */
- endpoint->rcv_urb = NULL;
- }
- }
-}
-#endif
-
-/* ************************************************************************** */
-
-/**
- * udc_connected - is the USB cable connected
- *
- * Return non-zero if cable is connected.
- */
-#if 0
-int udc_connected (void)
-{
- return ((inw (UDC_DEVSTAT) & UDC_ATT) == UDC_ATT);
-}
-#endif
-
-/* Turn on the USB connection by enabling the pullup resistor */
-void udc_connect (void)
-{
- UDCDBG ("connect, enable Pullup");
- outl (0x00000018, FUNC_MUX_CTRL_D);
-}
-
-/* Turn off the USB connection by disabling the pullup resistor */
-void udc_disconnect (void)
-{
- UDCDBG ("disconnect, disable Pullup");
- outl (0x00000000, FUNC_MUX_CTRL_D);
-}
-
-/* ************************************************************************** */
-
-
-/*
- * udc_disable_interrupts - disable interrupts
- * switch off interrupts
- */
-#if 0
-void udc_disable_interrupts (struct usb_device_instance *device)
-{
- UDCDBG ("disabling all interrupts");
- outw (0, UDC_IRQ_EN);
-}
-#endif
-
-/* ************************************************************************** */
-
-/**
- * udc_ep0_packetsize - return ep0 packetsize
- */
-#if 0
-int udc_ep0_packetsize (void)
-{
- return EP0_PACKETSIZE;
-}
-#endif
-
-/* Switch on the UDC */
-void udc_enable (struct usb_device_instance *device)
-{
- UDCDBGA ("enable device %p, status %d", device, device->status);
-
- /* initialize driver state variables */
- udc_devstat = 0;
-
- /* Save the device structure pointer */
- udc_device = device;
-
- /* Setup ep0 urb */
- if (!ep0_urb) {
- ep0_urb =
- usbd_alloc_urb (udc_device,
- udc_device->bus->endpoint_array);
- } else {
- serial_printf ("udc_enable: ep0_urb already allocated %p\n",
- ep0_urb);
- }
-
- UDCDBG ("Check clock status");
- UDCREG (STATUS_REQ);
-
- /* The VBUS_MODE bit selects whether VBUS detection is done via
- * software (1) or hardware (0). When software detection is
- * selected, VBUS_CTRL selects whether USB is not connected (0)
- * or connected (1).
- */
- outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_CTRL | UDC_VBUS_MODE,
- FUNC_MUX_CTRL_0);
- UDCREGL (FUNC_MUX_CTRL_0);
-
- omap1510_configure_device (device);
-}
-
-/* Switch off the UDC */
-void udc_disable (void)
-{
- UDCDBG ("disable UDC");
-
- omap1510_deconfigure_device ();
-
- /* The VBUS_MODE bit selects whether VBUS detection is done via
- * software (1) or hardware (0). When software detection is
- * selected, VBUS_CTRL selects whether USB is not connected (0)
- * or connected (1).
- */
- outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0);
- outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0);
- UDCREGL (FUNC_MUX_CTRL_0);
-
- /* Free ep0 URB */
- if (ep0_urb) {
- /*usbd_dealloc_urb(ep0_urb); */
- ep0_urb = NULL;
- }
-
- /* Reset device pointer.
- * We ought to do this here to balance the initialization of udc_device
- * in udc_enable, but some of our other exported functions get called
- * by the bus interface driver after udc_disable, so we have to hang on
- * to the device pointer to avoid a null pointer dereference. */
- /* udc_device = NULL; */
-}
-
-/**
- * udc_startup - allow udc code to do any additional startup
- */
-void udc_startup_events (struct usb_device_instance *device)
-{
- /* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */
- usbd_device_event_irq (device, DEVICE_INIT, 0);
-
- /* The DEVICE_CREATE event puts the USB device in the state
- * STATE_ATTACHED.
- */
- usbd_device_event_irq (device, DEVICE_CREATE, 0);
-
- /* Some USB controller driver implementations signal
- * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here.
- * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED,
- * and DEVICE_RESET causes a transition to the state STATE_DEFAULT.
- * The OMAP USB client controller has the capability to detect when the
- * USB cable is connected to a powered USB bus via the ATT bit in the
- * DEVSTAT register, so we will defer the DEVICE_HUB_CONFIGURED and
- * DEVICE_RESET events until later.
- */
-
- udc_enable (device);
-}
-
-/**
- * udc_irq - do pseudo interrupts
- */
-void udc_irq(void)
-{
- /* Loop while we have interrupts.
- * If we don't do this, the input chain
- * polling delay is likely to miss
- * host requests.
- */
- while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) {
- /* Handle any new IRQs */
- omap1510_udc_irq ();
- omap1510_udc_noniso_irq ();
- }
-}
-
-/* Flow control */
-void udc_set_nak(int epid)
-{
- /* TODO: implement this functionality in omap1510 */
-}
-
-void udc_unset_nak (int epid)
-{
- /* TODO: implement this functionality in omap1510 */
-}
-#endif
projects / oweals / u-boot.git / commitdiff