colibri_imx7: remove legacy sdboot wrapper

Remove legacy sdboot wrapper as distroboot can be used instead.

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>

diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index ade4df5ad8af5ed156b18a5034e9ed5f371d520a..c2d98291b0cdd3f970870d5341e923e7c39941bd 100644 (file)
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -109,28 +109,6 @@
        "ramdisk_addr_r=0x82100000\0" \
        "scriptaddr=0x82500000\0"
 
-#if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
-#define SD_BOOTDEV 0
-#elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
-#define SD_BOOTDEV 1
-#endif
-
-#define SD_BOOTCMD \
-       "set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0" \
-       "sdboot=run setup; run sdfinduuid; run set_sdargs; " \
-       "setenv bootargs ${defargs} ${sdargs} " \
-       "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
-       "run m4boot && " \
-       "load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \
-       "load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " \
-       "${soc}-colibri-${fdt_board}.dtb && " \
-       "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
-       "sdbootpart=1\0" \
-       "sddev=" __stringify(SD_BOOTDEV) "\0" \
-       "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
-       "sdrootpart=2\0"
-
-
 #define NFS_BOOTCMD \
        "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
        "nfsboot=run setup; " \
@@ -184,7 +162,6 @@
        BOOTENV \
        MEM_LAYOUT_ENV_SETTINGS \
        NFS_BOOTCMD \
-       SD_BOOTCMD \
        MODULE_EXTRA_ENV_SETTINGS \
        "boot_file=zImage\0" \
        "console=ttymxc0\0" \