arm: imx: cx9020: move dram init into common place
authorPatrick Bruenn <p.bruenn@beckhoff.com>
Tue, 16 Jan 2018 06:59:02 +0000 (07:59 +0100)
committerStefano Babic <sbabic@denx.de>
Sun, 4 Feb 2018 11:00:58 +0000 (12:00 +0100)
Move dram_init(), dram_init_banksize() and get_effective_memsize() to
arch/arm/mach-imx/mx5/mx53_dram.c, where it can be reused by m53evk and
mx53loco.

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
arch/arm/mach-imx/mx5/Makefile
arch/arm/mach-imx/mx5/mx53_dram.c [new file with mode: 0644]
board/beckhoff/mx53cx9020/mx53cx9020.c

index d021842f6811d41004f695b9f746aad66a96f628..368cfde98b8fec63e11edccf7dcb65f358e16356 100644 (file)
@@ -9,3 +9,6 @@
 
 obj-y := soc.o clock.o
 obj-y += lowlevel_init.o
+
+# common files for mx53 dram initialization
+obj-$(CONFIG_TARGET_MX53CX9020) += mx53_dram.o
diff --git a/arch/arm/mach-imx/mx5/mx53_dram.c b/arch/arm/mach-imx/mx5/mx53_dram.c
new file mode 100644 (file)
index 0000000..7e5fc42
--- /dev/null
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2017  Beckhoff Automation GmbH & Co. KG
+ * Patrick Bruenn <p.bruenn@beckhoff.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+phys_size_t get_effective_memsize(void)
+{
+       /*
+        * WARNING: We must override get_effective_memsize() function here
+        * to report only the size of the first DRAM bank. This is to make
+        * U-Boot relocator place U-Boot into valid memory, that is, at the
+        * end of the first DRAM bank. If we did not override this function
+        * like so, U-Boot would be placed at the address of the first DRAM
+        * bank + total DRAM size - sizeof(uboot), which in the setup where
+        * each DRAM bank contains 512MiB of DRAM would result in placing
+        * U-Boot into invalid memory area close to the end of the first
+        * DRAM bank.
+        */
+       return get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+}
+
+int dram_init(void)
+{
+       gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+       gd->ram_size += get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
+
+       return 0;
+}
+
+int dram_init_banksize(void)
+{
+       gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+       gd->bd->bi_dram[0].size = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+
+       gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+       gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
+
+       return 0;
+}
index d8bdfc27bb46c29cb2f06c5b23701086962b0bdb..f9df3604cd3e8e8c30e6ac937ed88374044712fb 100644 (file)
@@ -59,41 +59,6 @@ static const u32 CCAT_MODE_RUN = 0x0033DC8F;
 
 DECLARE_GLOBAL_DATA_PTR;
 
-phys_size_t get_effective_memsize(void)
-{
-       /*
-        * WARNING: We must override get_effective_memsize() function here
-        * to report only the size of the first DRAM bank. This is to make
-        * U-Boot relocator place U-Boot into valid memory, that is, at the
-        * end of the first DRAM bank. If we did not override this function
-        * like so, U-Boot would be placed at the address of the first DRAM
-        * bank + total DRAM size - sizeof(uboot), which in the setup where
-        * each DRAM bank contains 512MiB of DRAM would result in placing
-        * U-Boot into invalid memory area close to the end of the first
-        * DRAM bank.
-        */
-       return get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
-}
-
-int dram_init(void)
-{
-       gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
-       gd->ram_size += get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
-
-       return 0;
-}
-
-int dram_init_banksize(void)
-{
-       gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-       gd->bd->bi_dram[0].size = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
-
-       gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-       gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
-
-       return 0;
-}
-
 u32 get_board_rev(void)
 {
        struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;