config ARCH_ROCKCHIP
bool "Support Rockchip SoCs"
- select SUPPORT_SPL
- select SPL
select OF_CONTROL
- select CPU_V7
select BLK
select DM
- select SPL_DM
+ select SPL_DM if SPL
select SYS_MALLOC_F
- select SPL_SYS_MALLOC_SIMPLE
+ select SPL_SYS_MALLOC_SIMPLE if SPL
select DM_GPIO
select DM_I2C
select DM_MMC
rk3288-firefly.dtb \
rk3288-jerry.dtb \
rk3288-rock2-square.dtb \
- rk3036-sdk.dtb
+ rk3288-evb.dtb \
+ rk3036-sdk.dtb \
+ rk3399-evb.dtb
dtb-$(CONFIG_ARCH_MESON) += \
meson-gxbb-odroidc2.dtb
dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
--- /dev/null
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+ X11
+ */
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+
+/ {
+ model = "Evb-RK3288";
+ compatible = "evb-rk3288,evb-rk3288", "rockchip,rk3288";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+};
+
+&dmc {
+ rockchip,num-channels = <2>;
+ rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
+ 0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
+ 0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
+ 0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
+ 0x8 0x1f4>;
+ rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
+ 0x0 0xc3 0x6 0x2>;
+ rockchip,sdram-channel = /bits/ 8 <0x2 0xa 0x3 0x2 0x2 0x0 0xe 0xe>;
+ rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>;
+};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&uart2 {
+ u-boot,dm-pre-reloc;
+ reg-shift = <2>;
+};
+
+&sdmmc {
+ u-boot,dm-pre-reloc;
+};
+
+&emmc {
+ u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+ u-boot,dm-pre-reloc;
+};
+
+&gpio8 {
+ u-boot,dm-pre-reloc;
+};
--- /dev/null
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+ X11
+ */
+
+#include "rk3288.dtsi"
+
+/ {
+ memory {
+ reg = <0 0x80000000>;
+ };
+
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@0 {
+ gpio-key,wakeup = <1>;
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Power";
+ linux,code = <116>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_key>;
+ };
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_flash: flash-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_flash";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_5v: usb-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_host_5v: usb-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ regulator-name = "vcc_host_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&vcc_5v>;
+ };
+
+ vcc_otg_5v: usb-otg-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_vbus_drv>;
+ regulator-name = "vcc_otg_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&vcc_5v>;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+ broken-cd;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc_flash>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ vdd_cpu: syr827@40 {
+ compatible = "silergy,syr827";
+ fcs,suspend-voltage-selector = <1>;
+ reg = <0x40>;
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vdd_gpu: syr828@41 {
+ compatible = "silergy,syr828";
+ fcs,suspend-voltage-selector = <1>;
+ reg = <0x41>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ hym8563: hym8563@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ interrupt-parent = <&gpio7>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_int>;
+ };
+
+ act8846: act8846@5a {
+ compatible = "active-semi,act8846";
+ reg = <0x5a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_hold>;
+ system-power-controller;
+
+ regulators {
+ vcc_ddr: REG1 {
+ regulator-name = "vcc_ddr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vcc_io: REG2 {
+ regulator-name = "vcc_io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_log: REG3 {
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ vcc_20: REG4 {
+ regulator-name = "vcc_20";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ vccio_sd: REG5 {
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd10_lcd: REG6 {
+ regulator-name = "vdd10_lcd";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcca_codec: REG7 {
+ regulator-name = "vcca_codec";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcc_tp: REG8 {
+ regulator-name = "vcca_33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vccio_pmu: REG9 {
+ regulator-name = "vccio_pmu";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vdd_10: REG10 {
+ regulator-name = "vdd_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_18: REG11 {
+ regulator-name = "vcc_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc18_lcd: REG12 {
+ regulator-name = "vcc18_lcd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&pinctrl {
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+
+ act8846 {
+ pwr_hold: pwr-hold {
+ rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+
+ hym8563 {
+ rtc_int: rtc-int {
+ rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ keys {
+ pwr_key: pwr-key {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb_host {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb_otg {
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&saradc {
+ vref-supply = <&vcc_18>;
+ status = "okay";
+};
+
+&sdio0 {
+ broken-cd;
+ bus-width = <4>;
+ disable-wp;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
+ vmmc-supply = <&vcc_18>;
+ status = "disabled";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+ vmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usb_host1 {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_OTG0>;
clock-names = "otg";
+ dr_mode = "otg";
phys = <&usbphy0>;
phy-names = "usb2-phy";
status = "disabled";
--- /dev/null
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+
+/ {
+ model = "Rockchip RK3399 Evaluation Board";
+ compatible = "rockchip,rk3399-evb", "rockchip,rk3399",
+ "google,rk3399evb-rev2";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ vdd_center: vdd-center {
+ compatible = "pwm-regulator";
+ pwms = <&pwm3 0 25000 0>;
+ regulator-name = "vdd_center";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ status = "okay";
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_phy";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&pinctrl {
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ pmic_dvs2: pmic-dvs2 {
+ rockchip,pins =
+ <1 18 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
--- /dev/null
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dt-bindings/clock/rk3399-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+/ {
+ compatible = "rockchip,rk3399";
+
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu_l0>;
+ };
+ core1 {
+ cpu = <&cpu_l1>;
+ };
+ core2 {
+ cpu = <&cpu_l2>;
+ };
+ core3 {
+ cpu = <&cpu_l3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu_b0>;
+ };
+ core1 {
+ cpu = <&cpu_b1>;
+ };
+ };
+ };
+
+ cpu_l0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ #cooling-cells = <2>; /* min followed by max */
+ clocks = <&cru ARMCLKL>;
+ };
+
+ cpu_l1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLKL>;
+ };
+
+ cpu_l2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLKL>;
+ };
+
+ cpu_l3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLKL>;
+ };
+
+ cpu_b0: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ #cooling-cells = <2>; /* min followed by max */
+ clocks = <&cru ARMCLKB>;
+ };
+
+ cpu_b1: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLKB>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ xin24m: xin24m {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dmac_bus: dma-controller@ff6d0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff6d0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC0_PERILP>;
+ clock-names = "apb_pclk";
+ };
+
+ dmac_peri: dma-controller@ff6e0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff6e0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC1_PERILP>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ sdio0: dwmmc@fe310000 {
+ compatible = "rockchip,rk3399-dw-mshc",
+ "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xfe310000 0x0 0x4000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clock-freq-min-max = <400000 150000000>;
+ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ status = "disabled";
+ };
+
+ sdmmc: dwmmc@fe320000 {
+ compatible = "rockchip,rk3399-dw-mshc",
+ "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xfe320000 0x0 0x4000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clock-freq-min-max = <400000 150000000>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ status = "disabled";
+ };
+
+ sdhci: sdhci@fe330000 {
+ compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
+ reg = <0x0 0xfe330000 0x0 0x10000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&cru SCLK_EMMC>;
+ assigned-clock-rates = <200000000>;
+ clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
+ clock-names = "clk_xin", "clk_ahb";
+ phys = <&emmc_phy>;
+ phy-names = "phy_arasan";
+ status = "disabled";
+ };
+
+ usb_host0_ehci: usb@fe380000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xfe380000 0x0 0x20000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
+ clock-names = "hclk_host0", "hclk_host0_arb";
+ status = "disabled";
+ };
+
+ usb_host0_ohci: usb@fe3a0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xfe3a0000 0x0 0x20000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
+ clock-names = "hclk_host0", "hclk_host0_arb";
+ status = "disabled";
+ };
+
+ usb_host1_ehci: usb@fe3c0000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xfe3c0000 0x0 0x20000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
+ clock-names = "hclk_host1", "hclk_host1_arb";
+ status = "disabled";
+ };
+
+ usb_host1_ohci: usb@fe3e0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xfe3e0000 0x0 0x20000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
+ clock-names = "hclk_host1", "hclk_host1_arb";
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@fee00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+
+ reg = <0x0 0xfee00000 0 0x10000>, /* GICD */
+ <0x0 0xfef00000 0 0xc0000>, /* GICR */
+ <0x0 0xfff00000 0 0x10000>, /* GICC */
+ <0x0 0xfff10000 0 0x10000>, /* GICH */
+ <0x0 0xfff20000 0 0x10000>; /* GICV */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ its: interrupt-controller@fee20000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0xfee20000 0x0 0x20000>;
+ };
+ };
+
+ uart0: serial@ff180000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff180000 0x0 0x100>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer>;
+ status = "disabled";
+ };
+
+ uart1: serial@ff190000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff190000 0x0 0x100>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+ status = "disabled";
+ };
+
+ uart2: serial@ff1a0000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff1a0000 0x0 0x100>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2c_xfer>;
+ status = "disabled";
+ };
+
+ uart3: serial@ff1b0000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff1b0000 0x0 0x100>;
+ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_xfer>;
+ status = "disabled";
+ };
+
+ spi0: spi@ff1c0000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1c0000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@ff1d0000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1d0000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@ff1e0000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1e0000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi4: spi@ff1f0000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1f0000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi5: spi@ff200000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff200000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pmugrf: syscon@ff320000 {
+ compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
+ reg = <0x0 0xff320000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pmu_io_domains: io-domains {
+ compatible = "rockchip,rk3399-pmu-io-voltage-domain";
+ status = "disabled";
+ };
+ };
+
+ spi3: spi@ff350000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff350000 0x0 0x1000>;
+ clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart4: serial@ff370000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff370000 0x0 0x100>;
+ clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_xfer>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@ff420000 {
+ compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+ reg = <0x0 0xff420000 0x0 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ clocks = <&pmucru PCLK_RKPWM_PMU>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm1: pwm@ff420010 {
+ compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+ reg = <0x0 0xff420010 0x0 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ clocks = <&pmucru PCLK_RKPWM_PMU>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm2: pwm@ff420020 {
+ compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+ reg = <0x0 0xff420020 0x0 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ clocks = <&pmucru PCLK_RKPWM_PMU>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm3: pwm@ff420030 {
+ compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+ reg = <0x0 0xff420030 0x0 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3a_pin>;
+ clocks = <&pmucru PCLK_RKPWM_PMU>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pmucru: pmu-clock-controller@ff750000 {
+ compatible = "rockchip,rk3399-pmucru";
+ reg = <0x0 0xff750000 0x0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ assigned-clocks = <&pmucru PLL_PPLL>;
+ assigned-clock-rates = <676000000>;
+ };
+
+ cru: clock-controller@ff760000 {
+ compatible = "rockchip,rk3399-cru";
+ reg = <0x0 0xff760000 0x0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ assigned-clocks =
+ <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+ <&cru PLL_NPLL>,
+ <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
+ <&cru PCLK_PERIHP>,
+ <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
+ <&cru PCLK_PERILP0>,
+ <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>;
+ assigned-clock-rates =
+ <594000000>, <800000000>,
+ <1000000000>,
+ <150000000>, <75000000>,
+ <37500000>,
+ <100000000>, <100000000>,
+ <50000000>,
+ <100000000>, <50000000>;
+ };
+
+ grf: syscon@ff770000 {
+ compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+ reg = <0x0 0xff770000 0x0 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ io_domains: io-domains {
+ compatible = "rockchip,rk3399-io-voltage-domain";
+ status = "disabled";
+ };
+
+ emmc_phy: phy@f780 {
+ compatible = "rockchip,rk3399-emmc-phy";
+ reg = <0xf780 0x24>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ watchdog@ff840000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x0 0xff840000 0x0 0x100>;
+ clocks = <&cru PCLK_WDT>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ spdif: spdif@ff870000 {
+ compatible = "rockchip,rk3399-spdif";
+ reg = <0x0 0xff870000 0x0 0x1000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmac_bus 7>;
+ dma-names = "tx";
+ clock-names = "mclk", "hclk";
+ clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_bus>;
+ status = "disabled";
+ };
+
+ i2s0: i2s@ff880000 {
+ compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff880000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmac_bus 0>, <&dmac_bus 1>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_8ch_bus>;
+ status = "disabled";
+ };
+
+ i2s1: i2s@ff890000 {
+ compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff890000 0x0 0x1000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmac_bus 2>, <&dmac_bus 3>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_2ch_bus>;
+ status = "disabled";
+ };
+
+ i2s2: i2s@ff8a0000 {
+ compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff8a0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmac_bus 4>, <&dmac_bus 5>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>;
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3399-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmugrf>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio0: gpio0@ff720000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff720000 0x0 0x100>;
+ clocks = <&pmucru PCLK_GPIO0_PMU>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ gpio1: gpio1@ff730000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff730000 0x0 0x100>;
+ clocks = <&pmucru PCLK_GPIO1_PMU>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ gpio2: gpio2@ff780000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff780000 0x0 0x100>;
+ clocks = <&cru PCLK_GPIO2>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ gpio3: gpio3@ff788000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff788000 0x0 0x100>;
+ clocks = <&cru PCLK_GPIO3>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ gpio4: gpio4@ff790000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff790000 0x0 0x100>;
+ clocks = <&cru PCLK_GPIO4>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+ bias-disable;
+ drive-strength = <12>;
+ };
+
+ pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+ bias-pull-down;
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pcfg_pull_down_12ma: pcfg-pull-down-12ma {
+ bias-pull-down;
+ drive-strength = <12>;
+ };
+
+ pcfg_pull_none_13ma: pcfg-pull-none-13ma {
+ bias-disable;
+ drive-strength = <13>;
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins =
+ <1 15 RK_FUNC_2 &pcfg_pull_none>,
+ <1 16 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins =
+ <4 2 RK_FUNC_1 &pcfg_pull_none>,
+ <4 1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins =
+ <2 1 RK_FUNC_2 &pcfg_pull_none_12ma>,
+ <2 0 RK_FUNC_2 &pcfg_pull_none_12ma>;
+ };
+ };
+
+ i2c3 {
+ i2c3_xfer: i2c3-xfer {
+ rockchip,pins =
+ <4 17 RK_FUNC_1 &pcfg_pull_none>,
+ <4 16 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c4 {
+ i2c4_xfer: i2c4-xfer {
+ rockchip,pins =
+ <1 12 RK_FUNC_1 &pcfg_pull_none>,
+ <1 11 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c5 {
+ i2c5_xfer: i2c5-xfer {
+ rockchip,pins =
+ <3 11 RK_FUNC_2 &pcfg_pull_none>,
+ <3 10 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c6 {
+ i2c6_xfer: i2c6-xfer {
+ rockchip,pins =
+ <2 10 RK_FUNC_2 &pcfg_pull_none>,
+ <2 9 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c7 {
+ i2c7_xfer: i2c7-xfer {
+ rockchip,pins =
+ <2 8 RK_FUNC_2 &pcfg_pull_none>,
+ <2 7 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c8 {
+ i2c8_xfer: i2c8-xfer {
+ rockchip,pins =
+ <1 21 RK_FUNC_1 &pcfg_pull_none>,
+ <1 20 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2s0 {
+ i2s0_8ch_bus: i2s0-8ch-bus {
+ rockchip,pins =
+ <3 24 RK_FUNC_1 &pcfg_pull_none>,
+ <3 25 RK_FUNC_1 &pcfg_pull_none>,
+ <3 26 RK_FUNC_1 &pcfg_pull_none>,
+ <3 27 RK_FUNC_1 &pcfg_pull_none>,
+ <3 28 RK_FUNC_1 &pcfg_pull_none>,
+ <3 29 RK_FUNC_1 &pcfg_pull_none>,
+ <3 30 RK_FUNC_1 &pcfg_pull_none>,
+ <3 31 RK_FUNC_1 &pcfg_pull_none>,
+ <4 0 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2s1 {
+ i2s1_2ch_bus: i2s1-2ch-bus {
+ rockchip,pins =
+ <4 3 RK_FUNC_1 &pcfg_pull_none>,
+ <4 4 RK_FUNC_1 &pcfg_pull_none>,
+ <4 5 RK_FUNC_1 &pcfg_pull_none>,
+ <4 6 RK_FUNC_1 &pcfg_pull_none>,
+ <4 7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ spdif {
+ spdif_bus: spdif-bus {
+ rockchip,pins =
+ <4 21 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ spi0 {
+ spi0_clk: spi0-clk {
+ rockchip,pins =
+ <3 6 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_cs0: spi0-cs0 {
+ rockchip,pins =
+ <3 7 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_cs1: spi0-cs1 {
+ rockchip,pins =
+ <3 8 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_tx: spi0-tx {
+ rockchip,pins =
+ <3 5 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_rx: spi0-rx {
+ rockchip,pins =
+ <3 4 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
+ spi1 {
+ spi1_clk: spi1-clk {
+ rockchip,pins =
+ <1 9 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_cs0: spi1-cs0 {
+ rockchip,pins =
+ <1 10 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_rx: spi1-rx {
+ rockchip,pins =
+ <1 7 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_tx: spi1-tx {
+ rockchip,pins =
+ <1 8 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
+ spi2 {
+ spi2_clk: spi2-clk {
+ rockchip,pins =
+ <2 11 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi2_cs0: spi2-cs0 {
+ rockchip,pins =
+ <2 12 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi2_rx: spi2-rx {
+ rockchip,pins =
+ <2 9 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi2_tx: spi2-tx {
+ rockchip,pins =
+ <2 10 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ spi3 {
+ spi3_clk: spi3-clk {
+ rockchip,pins =
+ <1 17 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi3_cs0: spi3-cs0 {
+ rockchip,pins =
+ <1 18 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi3_rx: spi3-rx {
+ rockchip,pins =
+ <1 15 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi3_tx: spi3-tx {
+ rockchip,pins =
+ <1 16 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ spi4 {
+ spi4_clk: spi4-clk {
+ rockchip,pins =
+ <3 2 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi4_cs0: spi4-cs0 {
+ rockchip,pins =
+ <3 3 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi4_rx: spi4-rx {
+ rockchip,pins =
+ <3 0 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi4_tx: spi4-tx {
+ rockchip,pins =
+ <3 1 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
+ spi5 {
+ spi5_clk: spi5-clk {
+ rockchip,pins =
+ <2 22 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi5_cs0: spi5-cs0 {
+ rockchip,pins =
+ <2 23 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi5_rx: spi5-rx {
+ rockchip,pins =
+ <2 20 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi5_tx: spi5-tx {
+ rockchip,pins =
+ <2 21 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins =
+ <2 16 RK_FUNC_1 &pcfg_pull_up>,
+ <2 17 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins =
+ <2 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins =
+ <2 19 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins =
+ <3 12 RK_FUNC_2 &pcfg_pull_up>,
+ <3 13 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ uart2a {
+ uart2a_xfer: uart2a-xfer {
+ rockchip,pins =
+ <4 8 RK_FUNC_2 &pcfg_pull_up>,
+ <4 9 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ uart2b {
+ uart2b_xfer: uart2b-xfer {
+ rockchip,pins =
+ <4 16 RK_FUNC_2 &pcfg_pull_up>,
+ <4 17 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ uart2c {
+ uart2c_xfer: uart2c-xfer {
+ rockchip,pins =
+ <4 19 RK_FUNC_1 &pcfg_pull_up>,
+ <4 20 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart3 {
+ uart3_xfer: uart3-xfer {
+ rockchip,pins =
+ <3 14 RK_FUNC_2 &pcfg_pull_up>,
+ <3 15 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ uart3_cts: uart3-cts {
+ rockchip,pins =
+ <3 18 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ uart3_rts: uart3-rts {
+ rockchip,pins =
+ <3 19 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ uart4 {
+ uart4_xfer: uart4-xfer {
+ rockchip,pins =
+ <1 7 RK_FUNC_1 &pcfg_pull_up>,
+ <1 8 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uarthdcp {
+ uarthdcp_xfer: uarthdcp-xfer {
+ rockchip,pins =
+ <4 21 RK_FUNC_2 &pcfg_pull_up>,
+ <4 22 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins =
+ <4 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ vop0_pwm_pin: vop0-pwm-pin {
+ rockchip,pins =
+ <4 18 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins =
+ <4 22 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ vop1_pwm_pin: vop1-pwm-pin {
+ rockchip,pins =
+ <4 18 RK_FUNC_3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins =
+ <1 19 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3a {
+ pwm3a_pin: pwm3a-pin {
+ rockchip,pins =
+ <0 6 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3b {
+ pwm3b_pin: pwm3b-pin {
+ rockchip,pins =
+ <1 14 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+ };
+};
struct rk3288_cru;
struct rk3288_grf;
-void rkclk_configure_cpu(struct rk3288_cru *cru, struct rk3288_grf *grf);
+void rk3288_clk_configure_cpu(struct rk3288_cru *cru, struct rk3288_grf *grf);
+
+int rockchip_get_clk(struct udevice **devp);
#endif
if ARCH_ROCKCHIP
+config ROCKCHIP_RK3036
+ bool "Support Rockchip RK3036"
+ select CPU_V7
+ select SUPPORT_SPL
+ select SPL
+ help
+ The Rockchip RK3036 is a ARM-based SoC with a dual-core Cortex-A7
+ including NEON and GPU, Mali-400 graphics, several DDR3 options
+ and video codec support. Peripherals include Gigabit Ethernet,
+ USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.
+
config ROCKCHIP_RK3288
bool "Support Rockchip RK3288"
+ select CPU_V7
+ select SUPPORT_SPL
+ select SPL
help
The Rockchip RK3288 is a ARM-based SoC with a quad-core Cortex-A17
including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
and video codec support. Peripherals include Gigabit Ethernet,
USB2 host and OTG, SDIO, I2S, UART,s, SPI, I2C and PWMs.
-config ROCKCHIP_RK3036
- bool "Support Rockchip RK3036"
+config ROCKCHIP_RK3399
+ bool "Support Rockchip RK3399"
+ select ARM64
help
- The Rockchip RK3036 is a ARM-based SoC with a dual-core Cortex-A7
- including NEON and GPU, Mali-400 graphics, several DDR3 options
+ The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72
+ and quad-core Cortex-A53.
+ including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
+ video interfaces supporting HDMI and eDP, several DDR3 options
and video codec support. Peripherals include Gigabit Ethernet,
- USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.
+ USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.
+
+config ROCKCHIP_SPL_BACK_TO_BROM
+ bool "SPL returns to bootrom"
+ default y if ROCKCHIP_RK3036
+ help
+ Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled,
+ SPL will return to the boot rom, which will then load the U-Boot
+ binary to keep going on.
-source "arch/arm/mach-rockchip/rk3288/Kconfig"
source "arch/arm/mach-rockchip/rk3036/Kconfig"
+source "arch/arm/mach-rockchip/rk3288/Kconfig"
+source "arch/arm/mach-rockchip/rk3399/Kconfig"
endif
#
ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o
obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
+obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o
+obj-$(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) += save_boot_param.o
else
obj-$(CONFIG_ROCKCHIP_RK3288) += board.o
endif
+ifndef CONFIG_ARM64
obj-y += rk_timer.o
-obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/
+endif
obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/
+obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/
+obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399/
#include <ram.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
+#include <asm/arch/periph.h>
+#include <asm/gpio.h>
+#include <dm/pinctrl.h>
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
+#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
+ struct udevice *pinctrl;
+ int ret;
+
+ /*
+ * We need to implement sdcard iomux here for the further
+ * initlization, otherwise, it'll hit sdcard command sending
+ * timeout exception.
+ */
+ ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
+ if (ret) {
+ debug("%s: Cannot find pinctrl device\n", __func__);
+ goto err;
+ }
+ ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD);
+ if (ret) {
+ debug("%s: Failed to set up SD card\n", __func__);
+ goto err;
+ }
+
+ return 0;
+err:
+ printf("board_init: Error %d\n", ret);
+
+ /* No way to report error here */
+ hang();
+
+ return -1;
+#else
return 0;
+#endif
}
int dram_init(void)
{
}
+#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
+#include <usb.h>
+#include <usb/dwc2_udc.h>
+
+static struct dwc2_plat_otg_data rk3288_otg_data = {
+ .rx_fifo_sz = 512,
+ .np_tx_fifo_sz = 16,
+ .tx_fifo_sz = 128,
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ int node, phy_node;
+ const char *mode;
+ bool matched = false;
+ const void *blob = gd->fdt_blob;
+ u32 grf_phy_offset;
+
+ /* find the usb_otg node */
+ node = fdt_node_offset_by_compatible(blob, -1,
+ "rockchip,rk3288-usb");
+
+ while (node > 0) {
+ mode = fdt_getprop(blob, node, "dr_mode", NULL);
+ if (mode && strcmp(mode, "otg") == 0) {
+ matched = true;
+ break;
+ }
+
+ node = fdt_node_offset_by_compatible(blob, node,
+ "rockchip,rk3288-usb");
+ }
+ if (!matched) {
+ debug("Not found usb_otg device\n");
+ return -ENODEV;
+ }
+ rk3288_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg");
+
+ node = fdtdec_lookup_phandle(blob, node, "phys");
+ if (node <= 0) {
+ debug("Not found usb phy device\n");
+ return -ENODEV;
+ }
+
+ phy_node = fdt_parent_offset(blob, node);
+ if (phy_node <= 0) {
+ debug("Not found usb phy device\n");
+ return -ENODEV;
+ }
+
+ rk3288_otg_data.phy_of_node = phy_node;
+ grf_phy_offset = fdtdec_get_addr(blob, node, "reg");
+
+ /* find the grf node */
+ node = fdt_node_offset_by_compatible(blob, -1,
+ "rockchip,rk3288-grf");
+ if (node <= 0) {
+ debug("Not found grf device\n");
+ return -ENODEV;
+ }
+ rk3288_otg_data.regs_phy = grf_phy_offset +
+ fdtdec_get_addr(blob, node, "reg");
+
+ return dwc2_udc_probe(&rk3288_otg_data);
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+ return 0;
+}
+#endif
+
static int do_clock(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
int ret, i;
struct udevice *dev;
- ret = uclass_get_device(UCLASS_CLK, 0, &dev);
+ ret = rockchip_get_clk(&dev);
if (ret) {
printf("clk-uclass not found\n");
return 0;
config ROCKCHIP_COMMON
bool "Support rk common fuction"
-source "board/evb_rk3036/evb_rk3036/Kconfig"
-source "board/kylin/kylin_rk3036/Kconfig"
+source "board/rockchip/evb_rk3036/Kconfig"
+source "board/rockchip/kylin_rk3036/Kconfig"
endif
endif
obj-y += sdram_rk3036.o
-obj-y += save_boot_param.o
+++ /dev/null
-/*
- * (C) Copyright 2015 Google, Inc
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/linkage.h>
-
-.globl SAVE_SP_ADDR
-SAVE_SP_ADDR:
- .word 0
-
-/*
- * void save_boot_params
- *
- * Save sp, lr, r1~r12
- */
-ENTRY(save_boot_params)
- push {r1-r12, lr}
- ldr r0, =SAVE_SP_ADDR
- str sp, [r0]
- b save_boot_params_ret @ back to my caller
-ENDPROC(save_boot_params)
-
-
-.globl back_to_bootrom
-ENTRY(back_to_bootrom)
- ldr r0, =SAVE_SP_ADDR
- ldr sp, [r0]
- mov r0, #0
- pop {r1-r12, pc}
-ENDPROC(back_to_bootrom)
return 0;
}
#endif
-
+extern void back_to_bootrom(void);
void board_init_f(ulong dummy)
{
struct udevice *pinctrl;
rockchip_timer_init();
configure_l2ctlr();
- ret = uclass_get_device(UCLASS_CLK, 0, &dev);
+ ret = rockchip_get_clk(&dev);
if (ret) {
debug("CLK init failed: %d\n", ret);
return;
debug("DRAM init failed: %d\n", ret);
return;
}
+#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
+ back_to_bootrom();
+#endif
}
static int setup_led(void)
}
#ifdef CONFIG_SPL_MMC_SUPPORT
if (!IS_ENABLED(CONFIG_TARGET_ROCK2) &&
- !IS_ENABLED(CONFIG_TARGET_FIREFLY_RK3288)) {
+ !IS_ENABLED(CONFIG_TARGET_FIREFLY_RK3288) &&
+ !IS_ENABLED(CONFIG_TARGET_EVB_RK3288)) {
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD);
if (ret) {
debug("%s: Failed to set up SD card\n", __func__);
also includes on-board eMMC and 1GB of SDRAM. Expansion connectors
provide access to display pins, I2C, SPI, UART and GPIOs.
+config TARGET_EVB_RK3288
+ bool "Evb-RK3288"
+ help
+ EVB-RK3288 is a RK3288-based development board with 2 USB ports,
+ HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet, It
+ also includes on-board eMMC and 2GB of SDRAM. Expansion connectors
+ provide access to display pins, I2C, SPI, UART and GPIOs.
+
config TARGET_CHROMEBOOK_JERRY
bool "Google/Rockchip Veyron-Jerry Chromebook"
help
source "board/radxa/rock2/Kconfig"
+source "board/evb-rk3288/evb-rk3288/Kconfig"
+
endif
# SPDX-License-Identifier: GPL-2.0+
#
+obj-y += clk_rk3288.o
obj-y += reset_rk3288.o
obj-y += sdram_rk3288.o
obj-y += syscon_rk3288.o
--- /dev/null
+/*
+ * Copyright (C) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <syscon.h>
+#include <asm/arch/clock.h>
+
+int rockchip_get_clk(struct udevice **devp)
+{
+ return uclass_get_device_by_driver(UCLASS_CLK,
+ DM_GET_DRIVER(rockchip_rk3288_cru), devp);
+}
&sdram_params->ch[chan];
sys_reg |= info->row_3_4 << SYS_REG_ROW_3_4_SHIFT(chan);
- sys_reg |= chan << SYS_REG_CHINFO_SHIFT(chan);
+ sys_reg |= 1 << SYS_REG_CHINFO_SHIFT(chan);
sys_reg |= (info->rank - 1) << SYS_REG_RANK_SHIFT(chan);
sys_reg |= (info->col - 9) << SYS_REG_COL_SHIFT(chan);
- sys_reg |= info->bk == 3 ? 1 << SYS_REG_BK_SHIFT(chan) : 0;
+ sys_reg |= info->bk == 3 ? 0 : 1 << SYS_REG_BK_SHIFT(chan);
sys_reg |= (info->cs0_row - 13) << SYS_REG_CS0_ROW_SHIFT(chan);
sys_reg |= (info->cs1_row - 13) << SYS_REG_CS1_ROW_SHIFT(chan);
- sys_reg |= info->bw << SYS_REG_BW_SHIFT(chan);
- sys_reg |= info->dbw << SYS_REG_DBW_SHIFT(chan);
+ sys_reg |= (2 >> info->bw) << SYS_REG_BW_SHIFT(chan);
+ sys_reg |= (2 >> info->dbw) << SYS_REG_DBW_SHIFT(chan);
dram_cfg_rbc(&dram->chan[chan], chan, sdram_params);
}
rank = 1 + (sys_reg >> SYS_REG_RANK_SHIFT(ch) &
SYS_REG_RANK_MASK);
col = 9 + (sys_reg >> SYS_REG_COL_SHIFT(ch) & SYS_REG_COL_MASK);
- bk = sys_reg & (1 << SYS_REG_BK_SHIFT(ch)) ? 3 : 0;
+ bk = 3 - ((sys_reg >> SYS_REG_BK_SHIFT(ch)) & SYS_REG_BK_MASK);
cs0_row = 13 + (sys_reg >> SYS_REG_CS0_ROW_SHIFT(ch) &
SYS_REG_CS0_ROW_MASK);
cs1_row = 13 + (sys_reg >> SYS_REG_CS1_ROW_SHIFT(ch) &
SYS_REG_CS1_ROW_MASK);
- bw = (sys_reg >> SYS_REG_BW_SHIFT(ch)) &
- SYS_REG_BW_MASK;
+ bw = (2 >> ((sys_reg >> SYS_REG_BW_SHIFT(ch)) &
+ SYS_REG_BW_MASK));
row_3_4 = sys_reg >> SYS_REG_ROW_3_4_SHIFT(ch) &
SYS_REG_ROW_3_4_MASK;
return ret;
udelay(100);/* Must wait for voltage to stabilize, 2mV/us */
- rkclk_configure_cpu(priv->cru, priv->grf);
+ rk3288_clk_configure_cpu(priv->cru, priv->grf);
return 0;
}
priv->chan[1].pctl = regmap_get_range(plat->map, 2);
priv->chan[1].publ = regmap_get_range(plat->map, 3);
#endif
- ret = uclass_get_device(UCLASS_CLK, 0, &dev_clk);
+ ret = rockchip_get_clk(&dev_clk);
if (ret)
return ret;
priv->ddr_clk.id = CLK_DDR;
--- /dev/null
+if ROCKCHIP_RK3399
+
+choice
+ prompt "RK3399 board select"
+
+config TARGET_EVB_RK3399
+ bool "RK3399 evaluation board"
+ help
+ RK3399evb is a evaluation board for Rockchp rk3399,
+ with full function and phisical connectors support like type-C ports,
+ usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial...
+
+endchoice
+
+config SYS_SOC
+ default "rockchip"
+
+config SYS_MALLOC_F_LEN
+ default 0x0800
+
+source "board/rockchip/evb_rk3399/Kconfig"
+
+endif
--- /dev/null
+#
+# (C) Copyright 2016 Rockchip Electronics Co., Ltd
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += rk3399.o
--- /dev/null
+/*
+ * Copyright (c) 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/armv8/mmu.h>
+
+static struct mm_region rk3399_mem_map[] = {
+ {
+ .virt = 0x0UL,
+ .phys = 0x0UL,
+ .size = 0x80000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ }, {
+ .virt = 0xf0000000UL,
+ .phys = 0xf0000000UL,
+ .size = 0x10000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ /* List terminator */
+ 0,
+ }
+};
+
+struct mm_region *mem_map = rk3399_mem_map;
--- /dev/null
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/linkage.h>
+
+.globl SAVE_SP_ADDR
+SAVE_SP_ADDR:
+ .word 0
+
+/*
+ * void save_boot_params
+ *
+ * Save sp, lr, r1~r12
+ */
+ENTRY(save_boot_params)
+ push {r1-r12, lr}
+ ldr r0, =SAVE_SP_ADDR
+ str sp, [r0]
+ b save_boot_params_ret @ back to my caller
+ENDPROC(save_boot_params)
+
+
+.globl back_to_bootrom
+ENTRY(back_to_bootrom)
+ ldr r0, =SAVE_SP_ADDR
+ ldr sp, [r0]
+ mov r0, #0
+ pop {r1-r12, pc}
+ENDPROC(back_to_bootrom)
--- /dev/null
+if TARGET_EVB_RK3288
+
+config SYS_BOARD
+ default "evb-rk3288"
+
+config SYS_VENDOR
+ default "evb-rk3288"
+
+config SYS_CONFIG_NAME
+ default "evb-rk3288"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+
+endif
--- /dev/null
+EVB-RK3288
+M: Lin Huang <hl@rock-chips.com>
+S: Maintained
+F: board/evb-rk3288/evb-rk3288
+F: include/configs/evb-rk3288.h
+F: configs/evb-rk3288_defconfig
--- /dev/null
+#
+# (C) Copyright 2016 Rockchip Electronics Co., Ltd
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += evb-rk3288.o
--- /dev/null
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+
+void board_boot_order(u32 *spl_boot_list)
+{
+ /* eMMC prior to sdcard. */
+ spl_boot_list[0] = BOOT_DEVICE_MMC2;
+ spl_boot_list[1] = BOOT_DEVICE_MMC1;
+}
+++ /dev/null
-if TARGET_EVB_RK3036
-
-config SYS_BOARD
- default "evb_rk3036"
-
-config SYS_VENDOR
- default "evb_rk3036"
-
-config SYS_CONFIG_NAME
- default "evb_rk3036"
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
-
-endif
+++ /dev/null
-EVB-RK3036
-M: huang lin <hl@rock-chips.com>
-S: Maintained
-F: board/evb/evb-rk3036
-F: include/configs/evb-rk3036.h
-F: configs/evb-rk3036_defconfig
+++ /dev/null
-#
-# (C) Copyright 2015 Google, Inc
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += evb_rk3036.o
+++ /dev/null
-/*
- * (C) Copyright 2015 Rockchip Electronics Co., Ltd
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <dm.h>
-#include <asm/io.h>
-#include <asm/arch/uart.h>
-#include <asm/arch/sdram_rk3036.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void get_ddr_config(struct rk3036_ddr_config *config)
-{
- /* K4B4G1646Q config */
- config->ddr_type = 3;
- config->rank = 2;
- config->cs0_row = 15;
- config->cs1_row = 15;
-
- /* 8bank */
- config->bank = 3;
- config->col = 10;
-
- /* 16bit bw */
- config->bw = 1;
-}
-
-int board_init(void)
-{
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = sdram_size();
-
- return 0;
-}
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-void enable_caches(void)
-{
- /* Enable D-cache. I-cache is already enabled in start.S */
- dcache_enable();
-}
-#endif
+++ /dev/null
-if TARGET_KYLIN_RK3036
-
-config SYS_BOARD
- default "kylin_rk3036"
-
-config SYS_VENDOR
- default "kylin"
-
-config SYS_CONFIG_NAME
- default "kylin_rk3036"
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
-
-endif
+++ /dev/null
-KYLIN-RK3036
-M: huang lin <hl@rock-chips.com>
-S: Maintained
-F: board/kylin/kylin-rk3036
-F: include/configs/kylin-rk3036.h
-F: configs/kylin-rk3036_defconfig
+++ /dev/null
-#
-# (C) Copyright 2015 Google, Inc
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += kylin_rk3036.o
+++ /dev/null
-/*
- * (C) Copyright 2015 Rockchip Electronics Co., Ltd
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <dm.h>
-#include <asm/io.h>
-#include <asm/arch/uart.h>
-#include <asm/arch-rockchip/grf_rk3036.h>
-#include <asm/arch/sdram_rk3036.h>
-#include <asm/gpio.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define GRF_BASE 0x20008000
-
-void get_ddr_config(struct rk3036_ddr_config *config)
-{
- /* K4B4G1646Q config */
- config->ddr_type = 3;
- config->rank = 1;
- config->cs0_row = 15;
- config->cs1_row = 15;
-
- /* 8bank */
- config->bank = 3;
- config->col = 10;
-
- /* 16bit bw */
- config->bw = 1;
-}
-
-#define FASTBOOT_KEY_GPIO 93
-
-int fastboot_key_pressed(void)
-{
- gpio_request(FASTBOOT_KEY_GPIO, "fastboot_key");
- gpio_direction_input(FASTBOOT_KEY_GPIO);
- return !gpio_get_value(FASTBOOT_KEY_GPIO);
-}
-
-#define ROCKCHIP_BOOT_MODE_FASTBOOT 0x5242C309
-
-int board_late_init(void)
-{
- struct rk3036_grf * const grf = (void *)GRF_BASE;
- int boot_mode = readl(&grf->os_reg[4]);
-
- /* Clear boot mode */
- writel(0, &grf->os_reg[4]);
-
- if (boot_mode == ROCKCHIP_BOOT_MODE_FASTBOOT ||
- fastboot_key_pressed()) {
- printf("enter fastboot!\n");
- setenv("preboot", "setenv preboot; fastboot usb0");
- }
-
- return 0;
-}
-
-int board_init(void)
-{
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = sdram_size();
-
- return 0;
-}
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-void enable_caches(void)
-{
- /* Enable D-cache. I-cache is already enabled in start.S */
- dcache_enable();
-}
-#endif
--- /dev/null
+if TARGET_EVB_RK3036
+
+config SYS_BOARD
+ default "evb_rk3036"
+
+config SYS_VENDOR
+ default "rockchip"
+
+config SYS_CONFIG_NAME
+ default "evb_rk3036"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+
+endif
--- /dev/null
+EVB-RK3036
+M: huang lin <hl@rock-chips.com>
+S: Maintained
+F: board/evb/evb-rk3036
+F: include/configs/evb-rk3036.h
+F: configs/evb-rk3036_defconfig
--- /dev/null
+#
+# (C) Copyright 2015 Google, Inc
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += evb_rk3036.o
--- /dev/null
+/*
+ * (C) Copyright 2015 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <asm/arch/uart.h>
+#include <asm/arch/sdram_rk3036.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void get_ddr_config(struct rk3036_ddr_config *config)
+{
+ /* K4B4G1646Q config */
+ config->ddr_type = 3;
+ config->rank = 2;
+ config->cs0_row = 15;
+ config->cs1_row = 15;
+
+ /* 8bank */
+ config->bank = 3;
+ config->col = 10;
+
+ /* 16bit bw */
+ config->bw = 1;
+}
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = sdram_size();
+
+ return 0;
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+ /* Enable D-cache. I-cache is already enabled in start.S */
+ dcache_enable();
+}
+#endif
--- /dev/null
+if TARGET_EVB_RK3399
+
+config SYS_BOARD
+ default "evb_rk3399"
+
+config SYS_VENDOR
+ default "rockchip"
+
+config SYS_CONFIG_NAME
+ default "evb_rk3399"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+
+endif
--- /dev/null
+#
+# (C) Copyright 2016 Rockchip Electronics Co., Ltd
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += evb-rk3399.o
--- /dev/null
+Introduction
+============
+
+RK3399 key features we might use in U-Boot:
+* CPU: ARMv8 64bit Big-Little architecture,
+* Big: dual-core Cortex-A72
+* Little: quad-core Cortex-A53
+* IRAM: 200KB
+* DRAM: 4GB-128MB dual-channel
+* eMMC: support eMMC 5.0/5.1, suport HS400, HS200, DDR50
+* SD/MMC: support SD 3.0, MMC 4.51
+* USB: USB3.0 typc-C port *2 with dwc3 controller
+* USB2.0 EHCI host port *2
+* Display: RGB/HDMI/DP/MIPI/EDP
+
+evb key features:
+* regulator: pwm regulator for CPU B/L
+* PMIC: rk808
+* debug console: UART2
+
+In order to support Arm Trust Firmware(ATF), we need to use the
+miniloader from rockchip which:
+* do DRAM init
+* load and verify ATF image
+* load and verify U-Boot image
+
+Here is the step-by-step to boot to U-Boot on rk3399.
+
+Get the Source and prebuild binary
+==================================
+
+ > mkdir ~/evb_rk3399
+ > cd ~/evb_rk3399
+ > git clone https://github.com/ARM-software/arm-trusted-firmware.git
+ > git clone https://github.com/rockchip-linux/rkbin
+ > git clone https://github.com/rockchip-linux/rkflashtool
+
+Compile the ATF
+===============
+
+ > cd arm-trusted-firmware
+ > make realclean
+ > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
+
+Compile the U-Boot
+==================
+
+ > cd ../u-boot
+ > make CROSS_COMPILE=aarch64-linux-gnu- evb-rk3399_defconfig all
+
+Compile the rkflashtool
+=======================
+
+ > cd ../rkflashtool
+ > make
+
+Package the image for miniloader
+================================
+ > cd ..
+ > cp arm-trusted-firmware/build/rk3399/release/bl31.bin rkbin/rk33
+ > ./rkbin/tools/trust_merger rkbin/tools/RK3399TRUST.ini
+ > ./rkbin/tools/loaderimage --pack --uboot u-boot/u-boot-dtb.bin uboot.img
+ > mkdir image
+ > mv trust.img ./image/
+ > mv uboot.img ./image/rk3399evb-uboot.bin
+
+Flash the image
+===============
+Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then:
+
+ > ./rkflashtool/rkflashloader rk3399evb
+
+You should be able to get U-Boot log message in console/UART2 now.
--- /dev/null
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <asm/armv8/mmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = 0x80000000;
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = 0;
+ gd->bd->bi_dram[0].size = 0x80000000;
+}
--- /dev/null
+if TARGET_KYLIN_RK3036
+
+config SYS_BOARD
+ default "kylin_rk3036"
+
+config SYS_VENDOR
+ default "rockchip"
+
+config SYS_CONFIG_NAME
+ default "kylin_rk3036"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+
+endif
--- /dev/null
+KYLIN-RK3036
+M: huang lin <hl@rock-chips.com>
+S: Maintained
+F: board/kylin/kylin-rk3036
+F: include/configs/kylin-rk3036.h
+F: configs/kylin-rk3036_defconfig
--- /dev/null
+#
+# (C) Copyright 2015 Google, Inc
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += kylin_rk3036.o
--- /dev/null
+/*
+ * (C) Copyright 2015 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <asm/arch/uart.h>
+#include <asm/arch-rockchip/grf_rk3036.h>
+#include <asm/arch/sdram_rk3036.h>
+#include <asm/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define GRF_BASE 0x20008000
+
+void get_ddr_config(struct rk3036_ddr_config *config)
+{
+ /* K4B4G1646Q config */
+ config->ddr_type = 3;
+ config->rank = 1;
+ config->cs0_row = 15;
+ config->cs1_row = 15;
+
+ /* 8bank */
+ config->bank = 3;
+ config->col = 10;
+
+ /* 16bit bw */
+ config->bw = 1;
+}
+
+#define FASTBOOT_KEY_GPIO 93
+
+int fastboot_key_pressed(void)
+{
+ gpio_request(FASTBOOT_KEY_GPIO, "fastboot_key");
+ gpio_direction_input(FASTBOOT_KEY_GPIO);
+ return !gpio_get_value(FASTBOOT_KEY_GPIO);
+}
+
+#define ROCKCHIP_BOOT_MODE_FASTBOOT 0x5242C309
+
+int board_late_init(void)
+{
+ struct rk3036_grf * const grf = (void *)GRF_BASE;
+ int boot_mode = readl(&grf->os_reg[4]);
+
+ /* Clear boot mode */
+ writel(0, &grf->os_reg[4]);
+
+ if (boot_mode == ROCKCHIP_BOOT_MODE_FASTBOOT ||
+ fastboot_key_pressed()) {
+ printf("enter fastboot!\n");
+ setenv("preboot", "setenv preboot; fastboot usb0");
+ }
+
+ return 0;
+}
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = sdram_size();
+
+ return 0;
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+ /* Enable D-cache. I-cache is already enabled in start.S */
+ dcache_enable();
+}
+#endif
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
# CONFIG_SPL_PINCTRL_FULL is not set
-CONFIG_ROCKCHIP_PINCTRL=y
+CONFIG_ROCKCHIP_RK3288_PINCTRL=y
CONFIG_DM_PMIC=y
# CONFIG_SPL_PMIC_CHILDREN is not set
CONFIG_PMIC_RK808=y
CONFIG_DM_MMC=y
CONFIG_ROCKCHIP_DWMMC=y
CONFIG_PINCTRL=y
-CONFIG_ROCKCHIP_3036_PINCTRL=y
+CONFIG_ROCKCHIP_RK3036_PINCTRL=y
CONFIG_RAM=y
# CONFIG_SPL_SERIAL_PRESENT is not set
CONFIG_DEBUG_UART=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ROCKCHIP_RK3288=y
+CONFIG_TARGET_EVB_RK3288=y
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEFAULT_DEVICE_TREE="rk3288-evb"
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_SYSRESET=y
+CONFIG_DM_MMC=y
+CONFIG_ROCKCHIP_DWMMC=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_FULL is not set
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_FULL is not set
+CONFIG_ROCKCHIP_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_ACT8846=y
+CONFIG_DM_REGULATOR=y
+CONFIG_REGULATOR_ACT8846=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0xff690000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550=y
+CONFIG_USE_PRIVATE_LIBGCC=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_CMD_DHRYSTONE=y
+CONFIG_ERRNO_STR=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_TARGET_EVB_RK3399=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-evb"
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CLK=y
+CONFIG_FIT=y
+CONFIG_SYSRESET=y
+CONFIG_DM_MMC=y
+CONFIG_ROCKCHIP_SDHCI=y
+CONFIG_PINCTRL=y
+CONFIG_RAM=y
+CONFIG_SYS_NS16550=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
# CONFIG_SPL_PINCTRL_FULL is not set
-CONFIG_ROCKCHIP_PINCTRL=y
+CONFIG_ROCKCHIP_RK3288_PINCTRL=y
CONFIG_DM_PMIC=y
# CONFIG_SPL_PMIC_CHILDREN is not set
CONFIG_PMIC_ACT8846=y
CONFIG_DM_MMC=y
CONFIG_ROCKCHIP_DWMMC=y
CONFIG_PINCTRL=y
-CONFIG_ROCKCHIP_3036_PINCTRL=y
+CONFIG_ROCKCHIP_RK3036_PINCTRL=y
CONFIG_RAM=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_CMD_DHRYSTONE=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
# CONFIG_SPL_PINCTRL_FULL is not set
-CONFIG_ROCKCHIP_PINCTRL=y
+CONFIG_ROCKCHIP_RK3288_PINCTRL=y
CONFIG_DM_PMIC=y
# CONFIG_SPL_PMIC_CHILDREN is not set
CONFIG_PMIC_ACT8846=y
CONFIG_PCI_SANDBOX=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
-CONFIG_ROCKCHIP_PINCTRL=y
-CONFIG_ROCKCHIP_3036_PINCTRL=y
+CONFIG_ROCKCHIP_RK3288_PINCTRL=y
+CONFIG_ROCKCHIP_RK3036_PINCTRL=y
CONFIG_PINCTRL_SANDBOX=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_ACT8846=y
CONFIG_PCI_SANDBOX=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
-CONFIG_ROCKCHIP_PINCTRL=y
-CONFIG_ROCKCHIP_3036_PINCTRL=y
+CONFIG_ROCKCHIP_RK3288_PINCTRL=y
+CONFIG_ROCKCHIP_RK3036_PINCTRL=y
CONFIG_PINCTRL_SANDBOX=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_ACT8846=y
Building
========
-At present three RK3288 boards are supported:
+At present four RK3288 boards are supported:
- Firefly RK3288 - use firefly-rk3288 configuration
- Radxa Rock 2 - use rock2 configuration
- Hisense Chromebook - use chromebook_jerry configuration
+ - EVB RK3288 - use evb-rk3288 configuration
Two RK3036 board are supported:
Hit any key to stop autoboot: 0
=>
+The rockchip bootrom can load and boot an initial spl, then continue to
+load a second-level bootloader(ie. U-BOOT) as soon as it returns to bootrom.
+Therefore RK3288 has another loading sequence like RK3036. The option of
+U-Boot is controlled with this setting in U-Boot:
+
+ #define CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
+
+You can create the image via the following operations:
+
+ ./firefly-rk3288/tools/mkimage -n rk3288 -T rksd -d \
+ firefly-rk3288/spl/u-boot-spl-dtb.bin out && \
+ cat firefly-rk3288/u-boot-dtb.bin >> out && \
+ sudo dd if=out of=/dev/sdc seek=64
+
If you have an HDMI cable attached you should see a video console.
For evb_rk3036 board:
Note: rk3036 SDMMC and debug uart use the same iomux, so if you boot from SD, the
debug uart must be disabled
+Using fastboot on rk3288
+========================
+- Define GPT partition layout like kylin_rk3036(see include/configs/kylin_rk3036.h)
+- Write GPT partition layout to mmc device which fastboot want to use it to
+store the image
+
+ => gpt write mmc 1 $partitions
+
+- Invoke fastboot command to prepare
+
+ => fastboot 1
+
+- Start fastboot request on PC
+
+ fastboot -i 0x2207 flash loader evb-rk3288/spl/u-boot-spl-dtb.bin
+
+You should see something like:
+
+ => fastboot 1
+ WARNING: unknown variable: partition-type:loader
+ Starting download of 357796 bytes
+ ..
+ downloading of 357796 bytes finished
+ Flashing Raw Image
+ ........ wrote 357888 bytes to 'loader'
+
Booting from SPI
================
OUTPUT_MAX_HZ = 2200U * 1000000,
OUTPUT_MIN_HZ = 27500000,
FREF_MAX_HZ = 2200U * 1000000,
- FREF_MIN_HZ = 269 * 1000000,
+ FREF_MIN_HZ = 269 * 1000,
};
enum {
struct udevice *dev;
int ret;
- ret = uclass_get_device(UCLASS_CLK, 0, &dev);
+ ret = rockchip_get_clk(&dev);
if (ret)
return ERR_PTR(ret);
}
#endif
-void rkclk_configure_cpu(struct rk3288_cru *cru, struct rk3288_grf *grf)
+void rk3288_clk_configure_cpu(struct rk3288_cru *cru, struct rk3288_grf *grf)
{
/* pll enter slow-mode */
rk_clrsetreg(&cru->cru_mode_con,
}
#endif
+int uclass_get_device_by_driver(enum uclass_id id,
+ const struct driver *find_drv,
+ struct udevice **devp)
+{
+ struct udevice *dev;
+ struct uclass *uc;
+ int ret;
+
+ ret = uclass_get(id, &uc);
+ if (ret)
+ return ret;
+
+ list_for_each_entry(dev, &uc->dev_head, uclass_node) {
+ if (dev->driver == find_drv)
+ return uclass_get_device_tail(dev, 0, devp);
+ }
+
+ return -ENODEV;
+}
+
int uclass_get_device_tail(struct udevice *dev, int ret,
struct udevice **devp)
{
help
Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
+config ROCKCHIP_SDHCI
+ bool "Arasan SDHCI controller for Rockchip support"
+ depends on DM_MMC && BLK && DM_MMC_OPS
+ help
+ Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
+
config MMC_UNIPHIER
bool "UniPhier SD/MMC Host Controller support"
depends on ARCH_UNIPHIER
obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
obj-$(CONFIG_MMC_UNIPHIER) += uniphier-sd.o
obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
+obj-$(CONFIG_ROCKCHIP_SDHCI) += rockchip_sdhci.o
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
--- /dev/null
+/*
+ * (C) Copyright 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Rockchip SD Host Controller Interface
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <malloc.h>
+#include <sdhci.h>
+
+/* 400KHz is max freq for card ID etc. Use that as min */
+#define EMMC_MIN_FREQ 400000
+
+struct rockchip_sdhc_plat {
+ struct mmc_config cfg;
+ struct mmc mmc;
+};
+
+struct rockchip_sdhc {
+ struct sdhci_host host;
+ void *base;
+};
+
+static int arasan_sdhci_probe(struct udevice *dev)
+{
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct rockchip_sdhc_plat *plat = dev_get_platdata(dev);
+ struct rockchip_sdhc *prv = dev_get_priv(dev);
+ struct sdhci_host *host = &prv->host;
+ int ret;
+ u32 caps;
+
+ host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+ host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD;
+
+ caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+ ret = sdhci_setup_cfg(&plat->cfg, dev->name, host->bus_width,
+ caps, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ, EMMC_MIN_FREQ,
+ host->version, host->quirks, 0);
+
+ host->mmc = &plat->mmc;
+ if (ret)
+ return ret;
+ host->mmc->priv = &prv->host;
+ host->mmc->dev = dev;
+ upriv->mmc = host->mmc;
+
+ return sdhci_probe(dev);
+}
+
+static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
+{
+ struct sdhci_host *host = dev_get_priv(dev);
+
+ host->name = dev->name;
+ host->ioaddr = dev_get_addr_ptr(dev);
+
+ return 0;
+}
+
+static int rockchip_sdhci_bind(struct udevice *dev)
+{
+ struct rockchip_sdhc_plat *plat = dev_get_platdata(dev);
+ int ret;
+
+ ret = sdhci_bind(dev, &plat->mmc, &plat->cfg);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct udevice_id arasan_sdhci_ids[] = {
+ { .compatible = "arasan,sdhci-5.1" },
+ { }
+};
+
+U_BOOT_DRIVER(arasan_sdhci_drv) = {
+ .name = "arasan_sdhci",
+ .id = UCLASS_MMC,
+ .of_match = arasan_sdhci_ids,
+ .ofdata_to_platdata = arasan_sdhci_ofdata_to_platdata,
+ .ops = &sdhci_ops,
+ .bind = rockchip_sdhci_bind,
+ .probe = arasan_sdhci_probe,
+ .priv_auto_alloc_size = sizeof(struct rockchip_sdhc),
+ .platdata_auto_alloc_size = sizeof(struct rockchip_sdhc_plat),
+};
both the GPIO definitions and pin control functions for each
available multiplex function.
-config ROCKCHIP_PINCTRL
- bool "Rockchip pin control driver"
+config ROCKCHIP_RK3036_PINCTRL
+ bool "Rockchip rk3036 pin control driver"
depends on DM
help
- Support pin multiplexing control on Rockchip SoCs. The driver is
+ Support pin multiplexing control on Rockchip rk3036 SoCs. The driver is
controlled by a device tree node which contains both the GPIO
definitions and pin control functions for each available multiplex
function.
-config ROCKCHIP_3036_PINCTRL
- bool "Rockchip rk3036 pin control driver"
+config ROCKCHIP_RK3288_PINCTRL
+ bool "Rockchip pin control driver"
depends on DM
help
- Support pin multiplexing control on Rockchip rk3036 SoCs. The driver is
- controlled by a device tree node which contains both the GPIO
+ Support pin multiplexing control on Rockchip rk3288 SoCs. The driver
+ is controlled by a device tree node which contains both the GPIO
definitions and pin control functions for each available multiplex
function.
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_ROCKCHIP_PINCTRL) += pinctrl_rk3288.o
-obj-$(CONFIG_ROCKCHIP_3036_PINCTRL) += pinctrl_rk3036.o
+obj-$(CONFIG_ROCKCHIP_RK3036_PINCTRL) += pinctrl_rk3036.o
+obj-$(CONFIG_ROCKCHIP_RK3288_PINCTRL) += pinctrl_rk3288.o
int i;
unsigned int uTemp = writel(CORE_SOFT_RESET, ®->grstctl);
uint32_t dflt_gusbcfg;
+ uint32_t rx_fifo_sz, tx_fifo_sz, np_tx_fifo_sz;
debug("Reseting OTG controller\n");
/* 10. Unmask device IN EP common interrupts*/
writel(DIEPMSK_INIT, ®->diepmsk);
+ rx_fifo_sz = RX_FIFO_SIZE;
+ np_tx_fifo_sz = NPTX_FIFO_SIZE;
+ tx_fifo_sz = PTX_FIFO_SIZE;
+
+ if (dev->pdata->rx_fifo_sz)
+ rx_fifo_sz = dev->pdata->rx_fifo_sz;
+ if (dev->pdata->np_tx_fifo_sz)
+ np_tx_fifo_sz = dev->pdata->np_tx_fifo_sz;
+ if (dev->pdata->tx_fifo_sz)
+ tx_fifo_sz = dev->pdata->tx_fifo_sz;
+
/* 11. Set Rx FIFO Size (in 32-bit words) */
- writel(RX_FIFO_SIZE >> 2, ®->grxfsiz);
+ writel(rx_fifo_sz, ®->grxfsiz);
/* 12. Set Non Periodic Tx FIFO Size */
- writel((NPTX_FIFO_SIZE >> 2) << 16 | ((RX_FIFO_SIZE >> 2)) << 0,
+ writel((np_tx_fifo_sz << 16) | rx_fifo_sz,
®->gnptxfsiz);
for (i = 1; i < DWC2_MAX_HW_ENDPOINTS; i++)
- writel((PTX_FIFO_SIZE >> 2) << 16 |
- ((RX_FIFO_SIZE + NPTX_FIFO_SIZE +
- PTX_FIFO_SIZE*(i-1)) >> 2) << 0,
- ®->dieptxf[i-1]);
+ writel((rx_fifo_sz + np_tx_fifo_sz + tx_fifo_sz*(i-1)) |
+ tx_fifo_sz << 16, ®->dieptxf[i-1]);
/* Flush the RX FIFO */
writel(RX_FIFO_FLUSH, ®->grstctl);
#define HIGH_SPEED_CONTROL_PKT_SIZE 64
#define HIGH_SPEED_BULK_PKT_SIZE 512
-#define RX_FIFO_SIZE (1024*4)
-#define NPTX_FIFO_SIZE (1024*4)
-#define PTX_FIFO_SIZE (1536*1)
+#define RX_FIFO_SIZE (1024)
+#define NPTX_FIFO_SIZE (1024)
+#define PTX_FIFO_SIZE (384)
#define DEPCTL_TXFNUM_0 (0x0<<22)
#define DEPCTL_TXFNUM_1 (0x1<<22)
ctrl = readl(®->out_endp[ep_num].doepctl);
+ invalidate_dcache_range((unsigned long) ep->dma_buf,
+ (unsigned long) ep->dma_buf + ep->len);
+
writel((unsigned int) ep->dma_buf, ®->out_endp[ep_num].doepdma);
writel(DOEPT_SIZ_PKT_CNT(pktcnt) | DOEPT_SIZ_XFER_SIZE(length),
®->out_endp[ep_num].doeptsiz);
obj-$(CONFIG_TWL4030_USB) += twl4030.o
obj-$(CONFIG_OMAP_USB_PHY) += omap_usb_phy.o
+obj-$(CONFIG_ROCKCHIP_USB2_PHY) += rockchip_usb2_phy.o
--- /dev/null
+/*
+ * Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <libfdt.h>
+
+#include "../gadget/dwc2_udc_otg_priv.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define BIT_WRITEABLE_SHIFT 16
+
+struct usb2phy_reg {
+ unsigned int offset;
+ unsigned int bitend;
+ unsigned int bitstart;
+ unsigned int disable;
+ unsigned int enable;
+};
+
+/**
+ * struct rockchip_usb2_phy_cfg: usb-phy port configuration
+ * @port_reset: usb otg per-port reset register
+ * @soft_con: software control usb otg register
+ * @suspend: phy suspend register
+ */
+struct rockchip_usb2_phy_cfg {
+ struct usb2phy_reg port_reset;
+ struct usb2phy_reg soft_con;
+ struct usb2phy_reg suspend;
+};
+
+struct rockchip_usb2_phy_dt_id {
+ char compatible[128];
+ const void *data;
+};
+
+static const struct rockchip_usb2_phy_cfg rk3288_pdata = {
+ .port_reset = {0x00, 12, 12, 0, 1},
+ .soft_con = {0x08, 2, 2, 0, 1},
+ .suspend = {0x0c, 5, 0, 0x01, 0x2A},
+};
+
+static struct rockchip_usb2_phy_dt_id rockchip_usb2_phy_dt_ids[] = {
+ { .compatible = "rockchip,rk3288-usb-phy", .data = &rk3288_pdata },
+ {}
+};
+
+static void property_enable(struct dwc2_plat_otg_data *pdata,
+ const struct usb2phy_reg *reg, bool en)
+{
+ unsigned int val, mask, tmp;
+
+ tmp = en ? reg->enable : reg->disable;
+ mask = GENMASK(reg->bitend, reg->bitstart);
+ val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
+
+ writel(val, pdata->regs_phy + reg->offset);
+}
+
+
+void otg_phy_init(struct dwc2_udc *dev)
+{
+ struct dwc2_plat_otg_data *pdata = dev->pdata;
+ struct rockchip_usb2_phy_cfg *phy_cfg = NULL;
+ struct rockchip_usb2_phy_dt_id *of_id;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(rockchip_usb2_phy_dt_ids); i++) {
+ of_id = &rockchip_usb2_phy_dt_ids[i];
+ if (fdt_node_check_compatible(gd->fdt_blob, pdata->phy_of_node,
+ of_id->compatible) == 0) {
+ phy_cfg = (struct rockchip_usb2_phy_cfg *)of_id->data;
+ break;
+ }
+ }
+ if (!phy_cfg) {
+ debug("Can't find device platform data\n");
+
+ hang();
+ return;
+ }
+ pdata->priv = phy_cfg;
+ /* disable software control */
+ property_enable(pdata, &phy_cfg->soft_con, false);
+
+ /* reset otg port */
+ property_enable(pdata, &phy_cfg->port_reset, true);
+ mdelay(1);
+ property_enable(pdata, &phy_cfg->port_reset, false);
+ udelay(1);
+}
+
+void otg_phy_off(struct dwc2_udc *dev)
+{
+ struct dwc2_plat_otg_data *pdata = dev->pdata;
+ struct rockchip_usb2_phy_cfg *phy_cfg = pdata->priv;
+
+ /* enable software control */
+ property_enable(pdata, &phy_cfg->soft_con, true);
+ /* enter suspend */
+ property_enable(pdata, &phy_cfg->suspend, true);
+}
return ret;
}
- ret = uclass_get_device(UCLASS_CLK, 0, &dev_clk);
+ ret = rockchip_get_clk(&dev_clk);
if (!ret) {
clk.id = DCLK_VOP0 + remote_vop_id;
ret = clk_request(dev_clk, &clk);
--- /dev/null
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define ROCKCHIP_DEVICE_SETTINGS
+#include <configs/rk3288_common.h>
+
+#define CONFIG_SPL_MMC_SUPPORT
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 1
+/* SPL @ 32k for ~36k
+ * ENV @ 96k
+ * u-boot @ 128K
+ */
+#define CONFIG_ENV_OFFSET (96 * 1024)
+
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_CONSOLE_SCROLL_LINES 10
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __EVB_RK3399_H
+#define __EVB_RK3399_H
+
+#include <configs/rk3399_common.h>
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+/*
+ * SPL @ 32k for ~36k
+ * ENV @ 96k
+ * u-boot @ 128K
+ */
+#define CONFIG_ENV_OFFSET (96 * 1024)
+
+#define SDRAM_BANK_SIZE (2UL << 30)
+
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_CONSOLE_SCROLL_LINES 10
+
+#endif
#define CONFIG_SYS_NS16550_MEM32
#define CONFIG_SPL_BOARD_INIT
+#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
+/* Bootrom will load u-boot binary to 0x0 once return from SPL */
+#define CONFIG_SYS_TEXT_BASE 0x00000000
+#else
#define CONFIG_SYS_TEXT_BASE 0x00100000
+#endif
#define CONFIG_SYS_INIT_SP_ADDR 0x00100000
#define CONFIG_SYS_LOAD_ADDR 0x00800800
#define CONFIG_SPL_STACK 0xff718000
#define CONFIG_SPI
#define CONFIG_SF_DEFAULT_SPEED 20000000
+/* usb otg */
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_DWC2_OTG
+#define CONFIG_ROCKCHIP_USB2_PHY
+#define CONFIG_USB_GADGET_VBUS_DRAW 0
+
+/* fastboot */
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_USB_FUNCTION_FASTBOOT
+#define CONFIG_FASTBOOT_FLASH
+#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 /* eMMC */
+/* stroe safely fastboot buffer data to the middle of bank */
+#define CONFIG_FASTBOOT_BUF_ADDR (CONFIG_SYS_SDRAM_BASE \
+ + SDRAM_BANK_SIZE / 2)
+#define CONFIG_FASTBOOT_BUF_SIZE 0x08000000
+
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_G_DNL_MANUFACTURER "Rockchip"
+#define CONFIG_G_DNL_VENDOR_NUM 0x2207
+#define CONFIG_G_DNL_PRODUCT_NUM 0x320a
+
+/* Enable gpt partition table */
+#define CONFIG_CMD_GPT
+#define CONFIG_EFI_PARTITION
+
#ifndef CONFIG_SPL_BUILD
#include <config_distro_defaults.h>
--- /dev/null
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_RK3399_COMMON_H
+#define __CONFIG_RK3399_COMMON_H
+
+#define CONFIG_SYS_CACHELINE_SIZE 64
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_BAUDRATE 1500000
+#define CONFIG_SYS_MALLOC_LEN (32 << 20)
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SYS_NS16550_MEM32
+
+#define CONFIG_SYS_TEXT_BASE 0x00200000
+#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
+#define CONFIG_SYS_LOAD_ADDR 0x00800800
+
+#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
+
+/* MMC/SD IP block */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_SDHCI
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ 200000000
+
+#define CONFIG_FAT_WRITE
+
+/* RAW SD card / eMMC locations. */
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 256
+#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
+
+/* FAT sd card locations. */
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_SDRAM_BASE 0
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI
+#define CONFIG_SF_DEFAULT_SPEED 20000000
+
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_defaults.h>
+
+#define ENV_MEM_LAYOUT_SETTINGS \
+ "scriptaddr=0x00000000\0" \
+ "pxefile_addr_r=0x00100000\0" \
+ "fdt_addr_r=0x01f00000\0" \
+ "kernel_addr_r=0x02000000\0" \
+ "ramdisk_addr_r=0x04000000\0"
+
+/* First try to boot from SD (index 0), then eMMC (index 1) */
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(MMC, mmc, 1)
+
+#include <config_distro_bootcmd.h>
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ BOOTENV
+
+#endif
+
+#endif
#define U_BOOT_DRIVER(__name) \
ll_entry_declare(struct driver, __name, driver)
+/* Get a pointer to a given driver */
+#define DM_GET_DRIVER(__name) \
+ ll_entry_get(struct driver, __name, driver)
+
/**
* dev_get_platdata() - Get the platform data for a device
*
struct list_head sibling_node;
};
+struct driver;
struct udevice;
/* Members of this uclass sequence themselves with aliases */
int uclass_get_device_by_phandle(enum uclass_id id, struct udevice *parent,
const char *name, struct udevice **devp);
+/**
+ * uclass_get_device_by_driver() - Get a uclass device for a driver
+ *
+ * This searches the devices in the uclass for one that uses the given
+ * driver. Use DM_GET_DRIVER(name) for the @drv argument, where 'name' is
+ * the driver name - as used in U_BOOT_DRIVER(name).
+ *
+ * The device is probed to activate it ready for use.
+ *
+ * @id: ID to look up
+ * @drv: Driver to look for
+ * @devp: Returns pointer to the first device with that driver
+ * @return 0 if OK, -ve on error
+ */
+int uclass_get_device_by_driver(enum uclass_id id, const struct driver *drv,
+ struct udevice **devp);
+
/**
* uclass_first_device() - Get the first device in a uclass
*
--- /dev/null
+/*
+ * Copyright (c) 2016 Rockchip Electronics Co. Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3399_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3399_H
+
+/* core clocks */
+#define PLL_APLLL 1
+#define PLL_APLLB 2
+#define PLL_DPLL 3
+#define PLL_CPLL 4
+#define PLL_GPLL 5
+#define PLL_NPLL 6
+#define PLL_VPLL 7
+#define ARMCLKL 8
+#define ARMCLKB 9
+
+/* sclk gates (special clocks) */
+#define SCLK_I2C1 65
+#define SCLK_I2C2 66
+#define SCLK_I2C3 67
+#define SCLK_I2C5 68
+#define SCLK_I2C6 69
+#define SCLK_I2C7 70
+#define SCLK_SPI0 71
+#define SCLK_SPI1 72
+#define SCLK_SPI2 73
+#define SCLK_SPI4 74
+#define SCLK_SPI5 75
+#define SCLK_SDMMC 76
+#define SCLK_SDIO 77
+#define SCLK_EMMC 78
+#define SCLK_TSADC 79
+#define SCLK_SARADC 80
+#define SCLK_UART0 81
+#define SCLK_UART1 82
+#define SCLK_UART2 83
+#define SCLK_UART3 84
+#define SCLK_SPDIF_8CH 85
+#define SCLK_I2S0_8CH 86
+#define SCLK_I2S1_8CH 87
+#define SCLK_I2S2_8CH 88
+#define SCLK_I2S_8CH_OUT 89
+#define SCLK_TIMER00 90
+#define SCLK_TIMER01 91
+#define SCLK_TIMER02 92
+#define SCLK_TIMER03 93
+#define SCLK_TIMER04 94
+#define SCLK_TIMER05 95
+#define SCLK_TIMER06 96
+#define SCLK_TIMER07 97
+#define SCLK_TIMER08 98
+#define SCLK_TIMER09 99
+#define SCLK_TIMER10 100
+#define SCLK_TIMER11 101
+#define SCLK_MACREF 102
+#define SCLK_MAC_RX 103
+#define SCLK_MAC_TX 104
+#define SCLK_MAC 105
+#define SCLK_MACREF_OUT 106
+#define SCLK_VOP0_PWM 107
+#define SCLK_VOP1_PWM 108
+#define SCLK_RGA_CORE 109
+#define SCLK_ISP0 110
+#define SCLK_ISP1 111
+#define SCLK_HDMI_CEC 112
+#define SCLK_HDMI_SFR 113
+#define SCLK_DP_CORE 114
+#define SCLK_PVTM_CORE_L 115
+#define SCLK_PVTM_CORE_B 116
+#define SCLK_PVTM_GPU 117
+#define SCLK_PVTM_DDR 118
+#define SCLK_MIPIDPHY_REF 119
+#define SCLK_MIPIDPHY_CFG 120
+#define SCLK_HSICPHY 121
+#define SCLK_USBPHY480M 122
+#define SCLK_USB2PHY0_REF 123
+#define SCLK_USB2PHY1_REF 124
+#define SCLK_UPHY0_TCPDPHY_REF 125
+#define SCLK_UPHY0_TCPDCORE 126
+#define SCLK_UPHY1_TCPDPHY_REF 127
+#define SCLK_UPHY1_TCPDCORE 128
+#define SCLK_USB3OTG0_REF 129
+#define SCLK_USB3OTG1_REF 130
+#define SCLK_USB3OTG0_SUSPEND 131
+#define SCLK_USB3OTG1_SUSPEND 132
+#define SCLK_CRYPTO0 133
+#define SCLK_CRYPTO1 134
+#define SCLK_CCI_TRACE 135
+#define SCLK_CS 136
+#define SCLK_CIF_OUT 137
+#define SCLK_PCIEPHY_REF 138
+#define SCLK_PCIE_CORE 139
+#define SCLK_M0_PERILP 140
+#define SCLK_M0_PERILP_DEC 141
+#define SCLK_CM0S 142
+#define SCLK_DBG_NOC 143
+#define SCLK_DBG_PD_CORE_B 144
+#define SCLK_DBG_PD_CORE_L 145
+#define SCLK_DFIMON0_TIMER 146
+#define SCLK_DFIMON1_TIMER 147
+#define SCLK_INTMEM0 148
+#define SCLK_INTMEM1 149
+#define SCLK_INTMEM2 150
+#define SCLK_INTMEM3 151
+#define SCLK_INTMEM4 152
+#define SCLK_INTMEM5 153
+#define SCLK_SDMMC_DRV 154
+#define SCLK_SDMMC_SAMPLE 155
+#define SCLK_SDIO_DRV 156
+#define SCLK_SDIO_SAMPLE 157
+#define SCLK_VDU_CORE 158
+#define SCLK_VDU_CA 159
+#define SCLK_PCIE_PM 160
+#define SCLK_SPDIF_REC_DPTX 161
+#define SCLK_DPHY_PLL 162
+#define SCLK_DPHY_TX0_CFG 163
+#define SCLK_DPHY_TX1RX1_CFG 164
+#define SCLK_DPHY_RX0_CFG 165
+#define SCLK_RMII_SRC 166
+#define SCLK_PCIEPHY_REF100M 167
+
+#define DCLK_VOP0 180
+#define DCLK_VOP1 181
+#define DCLK_VOP0_DIV 182
+#define DCLK_VOP1_DIV 183
+#define DCLK_M0_PERILP 184
+
+#define FCLK_CM0S 190
+
+/* aclk gates */
+#define ACLK_PERIHP 192
+#define ACLK_PERIHP_NOC 193
+#define ACLK_PERILP0 194
+#define ACLK_PERILP0_NOC 195
+#define ACLK_PERF_PCIE 196
+#define ACLK_PCIE 197
+#define ACLK_INTMEM 198
+#define ACLK_TZMA 199
+#define ACLK_DCF 200
+#define ACLK_CCI 201
+#define ACLK_CCI_NOC0 202
+#define ACLK_CCI_NOC1 203
+#define ACLK_CCI_GRF 204
+#define ACLK_CENTER 205
+#define ACLK_CENTER_MAIN_NOC 206
+#define ACLK_CENTER_PERI_NOC 207
+#define ACLK_GPU 208
+#define ACLK_PERF_GPU 209
+#define ACLK_GPU_GRF 210
+#define ACLK_DMAC0_PERILP 211
+#define ACLK_DMAC1_PERILP 212
+#define ACLK_GMAC 213
+#define ACLK_GMAC_NOC 214
+#define ACLK_PERF_GMAC 215
+#define ACLK_VOP0_NOC 216
+#define ACLK_VOP0 217
+#define ACLK_VOP1_NOC 218
+#define ACLK_VOP1 219
+#define ACLK_RGA 220
+#define ACLK_RGA_NOC 221
+#define ACLK_HDCP 222
+#define ACLK_HDCP_NOC 223
+#define ACLK_HDCP22 224
+#define ACLK_IEP 225
+#define ACLK_IEP_NOC 226
+#define ACLK_VIO 227
+#define ACLK_VIO_NOC 228
+#define ACLK_ISP0 229
+#define ACLK_ISP1 230
+#define ACLK_ISP0_NOC 231
+#define ACLK_ISP1_NOC 232
+#define ACLK_ISP0_WRAPPER 233
+#define ACLK_ISP1_WRAPPER 234
+#define ACLK_VCODEC 235
+#define ACLK_VCODEC_NOC 236
+#define ACLK_VDU 237
+#define ACLK_VDU_NOC 238
+#define ACLK_PERI 239
+#define ACLK_EMMC 240
+#define ACLK_EMMC_CORE 241
+#define ACLK_EMMC_NOC 242
+#define ACLK_EMMC_GRF 243
+#define ACLK_USB3 244
+#define ACLK_USB3_NOC 245
+#define ACLK_USB3OTG0 246
+#define ACLK_USB3OTG1 247
+#define ACLK_USB3_RKSOC_AXI_PERF 248
+#define ACLK_USB3_GRF 249
+#define ACLK_GIC 250
+#define ACLK_GIC_NOC 251
+#define ACLK_GIC_ADB400_CORE_L_2_GIC 252
+#define ACLK_GIC_ADB400_CORE_B_2_GIC 253
+#define ACLK_GIC_ADB400_GIC_2_CORE_L 254
+#define ACLK_GIC_ADB400_GIC_2_CORE_B 255
+#define ACLK_CORE_ADB400_CORE_L_2_CCI500 256
+#define ACLK_CORE_ADB400_CORE_B_2_CCI500 257
+#define ACLK_ADB400M_PD_CORE_L 258
+#define ACLK_ADB400M_PD_CORE_B 259
+#define ACLK_PERF_CORE_L 260
+#define ACLK_PERF_CORE_B 261
+#define ACLK_GIC_PRE 262
+#define ACLK_VOP0_PRE 263
+#define ACLK_VOP1_PRE 264
+
+/* pclk gates */
+#define PCLK_PERIHP 320
+#define PCLK_PERIHP_NOC 321
+#define PCLK_PERILP0 322
+#define PCLK_PERILP1 323
+#define PCLK_PERILP1_NOC 324
+#define PCLK_PERILP_SGRF 325
+#define PCLK_PERIHP_GRF 326
+#define PCLK_PCIE 327
+#define PCLK_SGRF 328
+#define PCLK_INTR_ARB 329
+#define PCLK_CENTER_MAIN_NOC 330
+#define PCLK_CIC 331
+#define PCLK_COREDBG_B 332
+#define PCLK_COREDBG_L 333
+#define PCLK_DBG_CXCS_PD_CORE_B 334
+#define PCLK_DCF 335
+#define PCLK_GPIO2 336
+#define PCLK_GPIO3 337
+#define PCLK_GPIO4 338
+#define PCLK_GRF 339
+#define PCLK_HSICPHY 340
+#define PCLK_I2C1 341
+#define PCLK_I2C2 342
+#define PCLK_I2C3 343
+#define PCLK_I2C5 344
+#define PCLK_I2C6 345
+#define PCLK_I2C7 346
+#define PCLK_SPI0 347
+#define PCLK_SPI1 348
+#define PCLK_SPI2 349
+#define PCLK_SPI4 350
+#define PCLK_SPI5 351
+#define PCLK_UART0 352
+#define PCLK_UART1 353
+#define PCLK_UART2 354
+#define PCLK_UART3 355
+#define PCLK_TSADC 356
+#define PCLK_SARADC 357
+#define PCLK_GMAC 358
+#define PCLK_GMAC_NOC 359
+#define PCLK_TIMER0 360
+#define PCLK_TIMER1 361
+#define PCLK_EDP 362
+#define PCLK_EDP_NOC 363
+#define PCLK_EDP_CTRL 364
+#define PCLK_VIO 365
+#define PCLK_VIO_NOC 366
+#define PCLK_VIO_GRF 367
+#define PCLK_MIPI_DSI0 368
+#define PCLK_MIPI_DSI1 369
+#define PCLK_HDCP 370
+#define PCLK_HDCP_NOC 371
+#define PCLK_HDMI_CTRL 372
+#define PCLK_DP_CTRL 373
+#define PCLK_HDCP22 374
+#define PCLK_GASKET 375
+#define PCLK_DDR 376
+#define PCLK_DDR_MON 377
+#define PCLK_DDR_SGRF 378
+#define PCLK_ISP1_WRAPPER 379
+#define PCLK_WDT 380
+#define PCLK_EFUSE1024NS 381
+#define PCLK_EFUSE1024S 382
+#define PCLK_PMU_INTR_ARB 383
+#define PCLK_MAILBOX0 384
+#define PCLK_USBPHY_MUX_G 385
+#define PCLK_UPHY0_TCPHY_G 386
+#define PCLK_UPHY0_TCPD_G 387
+#define PCLK_UPHY1_TCPHY_G 388
+#define PCLK_UPHY1_TCPD_G 389
+#define PCLK_ALIVE 390
+
+/* hclk gates */
+#define HCLK_PERIHP 448
+#define HCLK_PERILP0 449
+#define HCLK_PERILP1 450
+#define HCLK_PERILP0_NOC 451
+#define HCLK_PERILP1_NOC 452
+#define HCLK_M0_PERILP 453
+#define HCLK_M0_PERILP_NOC 454
+#define HCLK_AHB1TOM 455
+#define HCLK_HOST0 456
+#define HCLK_HOST0_ARB 457
+#define HCLK_HOST1 458
+#define HCLK_HOST1_ARB 459
+#define HCLK_HSIC 460
+#define HCLK_SD 461
+#define HCLK_SDMMC 462
+#define HCLK_SDMMC_NOC 463
+#define HCLK_M_CRYPTO0 464
+#define HCLK_M_CRYPTO1 465
+#define HCLK_S_CRYPTO0 466
+#define HCLK_S_CRYPTO1 467
+#define HCLK_I2S0_8CH 468
+#define HCLK_I2S1_8CH 469
+#define HCLK_I2S2_8CH 470
+#define HCLK_SPDIF 471
+#define HCLK_VOP0_NOC 472
+#define HCLK_VOP0 473
+#define HCLK_VOP1_NOC 474
+#define HCLK_VOP1 475
+#define HCLK_ROM 476
+#define HCLK_IEP 477
+#define HCLK_IEP_NOC 478
+#define HCLK_ISP0 479
+#define HCLK_ISP1 480
+#define HCLK_ISP0_NOC 481
+#define HCLK_ISP1_NOC 482
+#define HCLK_ISP0_WRAPPER 483
+#define HCLK_ISP1_WRAPPER 484
+#define HCLK_RGA 485
+#define HCLK_RGA_NOC 486
+#define HCLK_HDCP 487
+#define HCLK_HDCP_NOC 488
+#define HCLK_HDCP22 489
+#define HCLK_VCODEC 490
+#define HCLK_VCODEC_NOC 491
+#define HCLK_VDU 492
+#define HCLK_VDU_NOC 493
+#define HCLK_SDIO 494
+#define HCLK_SDIO_NOC 495
+#define HCLK_SDIOAUDIO_NOC 496
+
+#define CLK_NR_CLKS (HCLK_SDIOAUDIO_NOC + 1)
+
+/* pmu-clocks indices */
+
+#define PLL_PPLL 1
+
+#define SCLK_32K_SUSPEND_PMU 2
+#define SCLK_SPI3_PMU 3
+#define SCLK_TIMER12_PMU 4
+#define SCLK_TIMER13_PMU 5
+#define SCLK_UART4_PMU 6
+#define SCLK_PVTM_PMU 7
+#define SCLK_WIFI_PMU 8
+#define SCLK_I2C0_PMU 9
+#define SCLK_I2C4_PMU 10
+#define SCLK_I2C8_PMU 11
+
+#define PCLK_SRC_PMU 19
+#define PCLK_PMU 20
+#define PCLK_PMUGRF_PMU 21
+#define PCLK_INTMEM1_PMU 22
+#define PCLK_GPIO0_PMU 23
+#define PCLK_GPIO1_PMU 24
+#define PCLK_SGRF_PMU 25
+#define PCLK_NOC_PMU 26
+#define PCLK_I2C0_PMU 27
+#define PCLK_I2C4_PMU 28
+#define PCLK_I2C8_PMU 29
+#define PCLK_RKPWM_PMU 30
+#define PCLK_SPI3_PMU 31
+#define PCLK_TIMER_PMU 32
+#define PCLK_MAILBOX_PMU 33
+#define PCLK_UART4_PMU 34
+#define PCLK_WDT_M0_PMU 35
+
+#define FCLK_CM0S_SRC_PMU 44
+#define FCLK_CM0S_PMU 45
+#define SCLK_CM0S_PMU 46
+#define HCLK_CM0S_PMU 47
+#define DCLK_CM0S_PMU 48
+#define PCLK_INTR_ARB_PMU 49
+#define HCLK_NOC_PMU 50
+
+#define CLKPMU_NR_CLKS (HCLK_NOC_PMU + 1)
+
+/* soft-reset indices */
+
+/* cru_softrst_con0 */
+#define SRST_CORE_L0 0
+#define SRST_CORE_B0 1
+#define SRST_CORE_PO_L0 2
+#define SRST_CORE_PO_B0 3
+#define SRST_L2_L 4
+#define SRST_L2_B 5
+#define SRST_ADB_L 6
+#define SRST_ADB_B 7
+#define SRST_A_CCI 8
+#define SRST_A_CCIM0_NOC 9
+#define SRST_A_CCIM1_NOC 10
+#define SRST_DBG_NOC 11
+
+/* cru_softrst_con1 */
+#define SRST_CORE_L0_T 16
+#define SRST_CORE_L1 17
+#define SRST_CORE_L2 18
+#define SRST_CORE_L3 19
+#define SRST_CORE_PO_L0_T 20
+#define SRST_CORE_PO_L1 21
+#define SRST_CORE_PO_L2 22
+#define SRST_CORE_PO_L3 23
+#define SRST_A_ADB400_GIC2COREL 24
+#define SRST_A_ADB400_COREL2GIC 25
+#define SRST_P_DBG_L 26
+#define SRST_L2_L_T 28
+#define SRST_ADB_L_T 29
+#define SRST_A_RKPERF_L 30
+#define SRST_PVTM_CORE_L 31
+
+/* cru_softrst_con2 */
+#define SRST_CORE_B0_T 32
+#define SRST_CORE_B1 33
+#define SRST_CORE_PO_B0_T 36
+#define SRST_CORE_PO_B1 37
+#define SRST_A_ADB400_GIC2COREB 40
+#define SRST_A_ADB400_COREB2GIC 41
+#define SRST_P_DBG_B 42
+#define SRST_L2_B_T 43
+#define SRST_ADB_B_T 45
+#define SRST_A_RKPERF_B 46
+#define SRST_PVTM_CORE_B 47
+
+/* cru_softrst_con3 */
+#define SRST_A_CCI_T 50
+#define SRST_A_CCIM0_NOC_T 51
+#define SRST_A_CCIM1_NOC_T 52
+#define SRST_A_ADB400M_PD_CORE_B_T 53
+#define SRST_A_ADB400M_PD_CORE_L_T 54
+#define SRST_DBG_NOC_T 55
+#define SRST_DBG_CXCS 56
+#define SRST_CCI_TRACE 57
+#define SRST_P_CCI_GRF 58
+
+/* cru_softrst_con4 */
+#define SRST_A_CENTER_MAIN_NOC 64
+#define SRST_A_CENTER_PERI_NOC 65
+#define SRST_P_CENTER_MAIN 66
+#define SRST_P_DDRMON 67
+#define SRST_P_CIC 68
+#define SRST_P_CENTER_SGRF 69
+#define SRST_DDR0_MSCH 70
+#define SRST_DDRCFG0_MSCH 71
+#define SRST_DDR0 72
+#define SRST_DDRPHY0 73
+#define SRST_DDR1_MSCH 74
+#define SRST_DDRCFG1_MSCH 75
+#define SRST_DDR1 76
+#define SRST_DDRPHY1 77
+#define SRST_DDR_CIC 78
+#define SRST_PVTM_DDR 79
+
+/* cru_softrst_con5 */
+#define SRST_A_VCODEC_NOC 80
+#define SRST_A_VCODEC 81
+#define SRST_H_VCODEC_NOC 82
+#define SRST_H_VCODEC 83
+#define SRST_A_VDU_NOC 88
+#define SRST_A_VDU 89
+#define SRST_H_VDU_NOC 90
+#define SRST_H_VDU 91
+#define SRST_VDU_CORE 92
+#define SRST_VDU_CA 93
+
+/* cru_softrst_con6 */
+#define SRST_A_IEP_NOC 96
+#define SRST_A_VOP_IEP 97
+#define SRST_A_IEP 98
+#define SRST_H_IEP_NOC 99
+#define SRST_H_IEP 100
+#define SRST_A_RGA_NOC 102
+#define SRST_A_RGA 103
+#define SRST_H_RGA_NOC 104
+#define SRST_H_RGA 105
+#define SRST_RGA_CORE 106
+#define SRST_EMMC_NOC 108
+#define SRST_EMMC 109
+#define SRST_EMMC_GRF 110
+
+/* cru_softrst_con7 */
+#define SRST_A_PERIHP_NOC 112
+#define SRST_P_PERIHP_GRF 113
+#define SRST_H_PERIHP_NOC 114
+#define SRST_USBHOST0 115
+#define SRST_HOSTC0_AUX 116
+#define SRST_HOST0_ARB 117
+#define SRST_USBHOST1 118
+#define SRST_HOSTC1_AUX 119
+#define SRST_HOST1_ARB 120
+#define SRST_SDIO0 121
+#define SRST_SDMMC 122
+#define SRST_HSIC 123
+#define SRST_HSIC_AUX 124
+#define SRST_AHB1TOM 125
+#define SRST_P_PERIHP_NOC 126
+#define SRST_HSICPHY 127
+
+/* cru_softrst_con8 */
+#define SRST_A_PCIE 128
+#define SRST_P_PCIE 129
+#define SRST_PCIE_CORE 130
+#define SRST_PCIE_MGMT 131
+#define SRST_PCIE_MGMT_STICKY 132
+#define SRST_PCIE_PIPE 133
+#define SRST_PCIE_PM 134
+#define SRST_PCIEPHY 135
+#define SRST_A_GMAC_NOC 136
+#define SRST_A_GMAC 137
+#define SRST_P_GMAC_NOC 138
+#define SRST_P_GMAC_GRF 140
+#define SRST_HSICPHY_POR 142
+#define SRST_HSICPHY_UTMI 143
+
+/* cru_softrst_con9 */
+#define SRST_USB2PHY0_POR 144
+#define SRST_USB2PHY0_UTMI_PORT0 145
+#define SRST_USB2PHY0_UTMI_PORT1 146
+#define SRST_USB2PHY0_EHCIPHY 147
+#define SRST_UPHY0_PIPE_L00 148
+#define SRST_UPHY0 149
+#define SRST_UPHY0_TCPDPWRUP 150
+#define SRST_USB2PHY1_POR 152
+#define SRST_USB2PHY1_UTMI_PORT0 153
+#define SRST_USB2PHY1_UTMI_PORT1 154
+#define SRST_USB2PHY1_EHCIPHY 155
+#define SRST_UPHY1_PIPE_L00 156
+#define SRST_UPHY1 157
+#define SRST_UPHY1_TCPDPWRUP 158
+
+/* cru_softrst_con10 */
+#define SRST_A_PERILP0_NOC 160
+#define SRST_A_DCF 161
+#define SRST_GIC500 162
+#define SRST_DMAC0_PERILP0 163
+#define SRST_DMAC1_PERILP0 164
+#define SRST_TZMA 165
+#define SRST_INTMEM 166
+#define SRST_ADB400_MST0 167
+#define SRST_ADB400_MST1 168
+#define SRST_ADB400_SLV0 169
+#define SRST_ADB400_SLV1 170
+#define SRST_H_PERILP0 171
+#define SRST_H_PERILP0_NOC 172
+#define SRST_ROM 173
+#define SRST_CRYPTO_S 174
+#define SRST_CRYPTO_M 175
+
+/* cru_softrst_con11 */
+#define SRST_P_DCF 176
+#define SRST_CM0S_NOC 177
+#define SRST_CM0S 178
+#define SRST_CM0S_DBG 179
+#define SRST_CM0S_PO 180
+#define SRST_CRYPTO 181
+#define SRST_P_PERILP1_SGRF 182
+#define SRST_P_PERILP1_GRF 183
+#define SRST_CRYPTO1_S 184
+#define SRST_CRYPTO1_M 185
+#define SRST_CRYPTO1 186
+#define SRST_GIC_NOC 188
+#define SRST_SD_NOC 189
+#define SRST_SDIOAUDIO_BRG 190
+
+/* cru_softrst_con12 */
+#define SRST_H_PERILP1 192
+#define SRST_H_PERILP1_NOC 193
+#define SRST_H_I2S0_8CH 194
+#define SRST_H_I2S1_8CH 195
+#define SRST_H_I2S2_8CH 196
+#define SRST_H_SPDIF_8CH 197
+#define SRST_P_PERILP1_NOC 198
+#define SRST_P_EFUSE_1024 199
+#define SRST_P_EFUSE_1024S 200
+#define SRST_P_I2C0 201
+#define SRST_P_I2C1 202
+#define SRST_P_I2C2 203
+#define SRST_P_I2C3 204
+#define SRST_P_I2C4 205
+#define SRST_P_I2C5 206
+#define SRST_P_MAILBOX0 207
+
+/* cru_softrst_con13 */
+#define SRST_P_UART0 208
+#define SRST_P_UART1 209
+#define SRST_P_UART2 210
+#define SRST_P_UART3 211
+#define SRST_P_SARADC 212
+#define SRST_P_TSADC 213
+#define SRST_P_SPI0 214
+#define SRST_P_SPI1 215
+#define SRST_P_SPI2 216
+#define SRST_P_SPI3 217
+#define SRST_P_SPI4 218
+#define SRST_SPI0 219
+#define SRST_SPI1 220
+#define SRST_SPI2 221
+#define SRST_SPI3 222
+#define SRST_SPI4 223
+
+/* cru_softrst_con14 */
+#define SRST_I2S0_8CH 224
+#define SRST_I2S1_8CH 225
+#define SRST_I2S2_8CH 226
+#define SRST_SPDIF_8CH 227
+#define SRST_UART0 228
+#define SRST_UART1 229
+#define SRST_UART2 230
+#define SRST_UART3 231
+#define SRST_TSADC 232
+#define SRST_I2C0 233
+#define SRST_I2C1 234
+#define SRST_I2C2 235
+#define SRST_I2C3 236
+#define SRST_I2C4 237
+#define SRST_I2C5 238
+#define SRST_SDIOAUDIO_NOC 239
+
+/* cru_softrst_con15 */
+#define SRST_A_VIO_NOC 240
+#define SRST_A_HDCP_NOC 241
+#define SRST_A_HDCP 242
+#define SRST_H_HDCP_NOC 243
+#define SRST_H_HDCP 244
+#define SRST_P_HDCP_NOC 245
+#define SRST_P_HDCP 246
+#define SRST_P_HDMI_CTRL 247
+#define SRST_P_DP_CTRL 248
+#define SRST_S_DP_CTRL 249
+#define SRST_C_DP_CTRL 250
+#define SRST_P_MIPI_DSI0 251
+#define SRST_P_MIPI_DSI1 252
+#define SRST_DP_CORE 253
+#define SRST_DP_I2S 254
+
+/* cru_softrst_con16 */
+#define SRST_GASKET 256
+#define SRST_VIO_GRF 258
+#define SRST_DPTX_SPDIF_REC 259
+#define SRST_HDMI_CTRL 260
+#define SRST_HDCP_CTRL 261
+#define SRST_A_ISP0_NOC 262
+#define SRST_A_ISP1_NOC 263
+#define SRST_H_ISP0_NOC 266
+#define SRST_H_ISP1_NOC 267
+#define SRST_H_ISP0 268
+#define SRST_H_ISP1 269
+#define SRST_ISP0 270
+#define SRST_ISP1 271
+
+/* cru_softrst_con17 */
+#define SRST_A_VOP0_NOC 272
+#define SRST_A_VOP1_NOC 273
+#define SRST_A_VOP0 274
+#define SRST_A_VOP1 275
+#define SRST_H_VOP0_NOC 276
+#define SRST_H_VOP1_NOC 277
+#define SRST_H_VOP0 278
+#define SRST_H_VOP1 279
+#define SRST_D_VOP0 280
+#define SRST_D_VOP1 281
+#define SRST_VOP0_PWM 282
+#define SRST_VOP1_PWM 283
+#define SRST_P_EDP_NOC 284
+#define SRST_P_EDP_CTRL 285
+
+/* cru_softrst_con18 */
+#define SRST_A_GPU 288
+#define SRST_A_GPU_NOC 289
+#define SRST_A_GPU_GRF 290
+#define SRST_PVTM_GPU 291
+#define SRST_A_USB3_NOC 292
+#define SRST_A_USB3_OTG0 293
+#define SRST_A_USB3_OTG1 294
+#define SRST_A_USB3_GRF 295
+#define SRST_PMU 296
+
+/* cru_softrst_con19 */
+#define SRST_P_TIMER0_5 304
+#define SRST_TIMER0 305
+#define SRST_TIMER1 306
+#define SRST_TIMER2 307
+#define SRST_TIMER3 308
+#define SRST_TIMER4 309
+#define SRST_TIMER5 310
+#define SRST_P_TIMER6_11 311
+#define SRST_TIMER6 312
+#define SRST_TIMER7 313
+#define SRST_TIMER8 314
+#define SRST_TIMER9 315
+#define SRST_TIMER10 316
+#define SRST_TIMER11 317
+#define SRST_P_INTR_ARB_PMU 318
+#define SRST_P_ALIVE_SGRF 319
+
+/* cru_softrst_con20 */
+#define SRST_P_GPIO2 320
+#define SRST_P_GPIO3 321
+#define SRST_P_GPIO4 322
+#define SRST_P_GRF 323
+#define SRST_P_ALIVE_NOC 324
+#define SRST_P_WDT0 325
+#define SRST_P_WDT1 326
+#define SRST_P_INTR_ARB 327
+#define SRST_P_UPHY0_DPTX 328
+#define SRST_P_UPHY0_APB 330
+#define SRST_P_UPHY0_TCPHY 332
+#define SRST_P_UPHY1_TCPHY 333
+#define SRST_P_UPHY0_TCPDCTRL 334
+#define SRST_P_UPHY1_TCPDCTRL 335
+
+/* pmu soft-reset indices */
+
+/* pmu_cru_softrst_con0 */
+#define SRST_P_NOC 0
+#define SRST_P_INTMEM 1
+#define SRST_H_CM0S 2
+#define SRST_H_CM0S_NOC 3
+#define SRST_DBG_CM0S 4
+#define SRST_PO_CM0S 5
+#define SRST_P_SPI6 6
+#define SRST_SPI6 7
+#define SRST_P_TIMER_0_1 8
+#define SRST_P_TIMER_0 9
+#define SRST_P_TIMER_1 10
+#define SRST_P_UART4 11
+#define SRST_UART4 12
+#define SRST_P_WDT 13
+
+/* pmu_cru_softrst_con1 */
+#define SRST_P_I2C6 16
+#define SRST_P_I2C7 17
+#define SRST_P_I2C8 18
+#define SRST_P_MAILBOX 19
+#define SRST_P_RKPWM 20
+#define SRST_P_PMUGRF 21
+#define SRST_P_SGRF 22
+#define SRST_P_GPIO0 23
+#define SRST_P_GPIO1 24
+#define SRST_P_CRU 25
+#define SRST_P_INTR 26
+#define SRST_PVTM 27
+#define SRST_I2C6 28
+#define SRST_I2C7 29
+#define SRST_I2C8 30
+
+#endif
#define PHY0_SLEEP (1 << 5)
struct dwc2_plat_otg_data {
+ void *priv;
+ int phy_of_node;
int (*phy_control)(int on);
unsigned int regs_phy;
unsigned int regs_otg;
unsigned int usb_phy_ctrl;
unsigned int usb_flags;
unsigned int usb_gusbcfg;
+ unsigned int rx_fifo_sz;
+ unsigned int np_tx_fifo_sz;
+ unsigned int tx_fifo_sz;
};
int dwc2_udc_probe(struct dwc2_plat_otg_data *pdata);
static struct spl_info spl_infos[] = {
{ "rk3036", "RK30", 0x1000 },
{ "rk3288", "RK32", 0x8000 },
+ { "rk3399", "RK33", 0x20000 },
};
static unsigned char rc4_key[16] = {
projects / oweals / u-boot.git / commitdiff