ARM: keystone2: Cleanup PLL init code
authorLokesh Vutla <lokeshvutla@ti.com>
Tue, 28 Jul 2015 08:46:43 +0000 (14:16 +0530)
committerTom Rini <trini@konsulko.com>
Thu, 13 Aug 2015 00:47:52 +0000 (20:47 -0400)
There are two types of PLL for all keystone platforms:
Main PLL, Secondary PLL. Instead of duplicating the same definition
for each secondary PLL, have a common function which does
initialization for both PLLs. And also add proper register
definitions.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
arch/arm/mach-keystone/clock.c
arch/arm/mach-keystone/include/mach/clock-k2e.h
arch/arm/mach-keystone/include/mach/clock.h
arch/arm/mach-keystone/include/mach/clock_defs.h
board/ti/ks2_evm/board.c
board/ti/ks2_evm/board_k2e.c
board/ti/ks2_evm/board_k2hk.c
board/ti/ks2_evm/board_k2l.c

index 625907fcda31d6a8aacdad9766edf5d1b4641fc8..b5b66e4224dd9951ce04c82bdf180a815cec8a73 100644 (file)
@@ -18,189 +18,171 @@ static void wait_for_completion(const struct pll_init_data *data)
        int i;
        for (i = 0; i < 100; i++) {
                sdelay(450);
-               if ((pllctl_reg_read(data->pll, stat) & PLLSTAT_GO) == 0)
+               if (!(pllctl_reg_read(data->pll, stat) & PLLSTAT_GOSTAT_MASK))
                        break;
        }
 }
 
-void init_pll(const struct pll_init_data *data)
+static inline void bypass_main_pll(const struct pll_init_data *data)
 {
-       u32 tmp, tmp_ctl, pllm, plld, pllod, bwadj;
+       pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLENSRC_MASK |
+                          PLLCTL_PLLEN_MASK);
+
+       /* 4 cycles of reference clock CLKIN*/
+       sdelay(340);
+}
+
+static void configure_mult_div(const struct pll_init_data *data)
+{
+       u32 pllm, plld, bwadj;
 
        pllm = data->pll_m - 1;
-       plld = (data->pll_d - 1) & PLL_DIV_MASK;
-       pllod = (data->pll_od - 1) & PLL_CLKOD_MASK;
+       plld = (data->pll_d - 1) & CFG_PLLCTL0_PLLD_MASK;
 
-       if (data->pll == MAIN_PLL) {
-               /* The requered delay before main PLL configuration */
-               sdelay(210000);
+       /* Program Multiplier */
+       if (data->pll == MAIN_PLL)
+               pllctl_reg_write(data->pll, mult, pllm & PLLM_MULT_LO_MASK);
 
-               tmp = pllctl_reg_read(data->pll, secctl);
+       clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
+                       CFG_PLLCTL0_PLLM_MASK,
+                       pllm << CFG_PLLCTL0_PLLM_SHIFT);
+
+       /* Program BWADJ */
+       bwadj = (data->pll_m - 1) >> 1; /* Divide pllm by 2 */
+       clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
+                       CFG_PLLCTL0_BWADJ_MASK,
+                       (bwadj << CFG_PLLCTL0_BWADJ_SHIFT) &
+                       CFG_PLLCTL0_BWADJ_MASK);
+       bwadj = bwadj >> CFG_PLLCTL0_BWADJ_BITS;
+       clrsetbits_le32(keystone_pll_regs[data->pll].reg1,
+                       CFG_PLLCTL1_BWADJ_MASK, bwadj);
+
+       /* Program Divider */
+       clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
+                       CFG_PLLCTL0_PLLD_MASK, plld);
+}
 
-               if (tmp & (PLLCTL_BYPASS)) {
-                       setbits_le32(keystone_pll_regs[data->pll].reg1,
-                                    BIT(MAIN_ENSAT_OFFSET));
+void configure_main_pll(const struct pll_init_data *data)
+{
+       u32 tmp, pllod, i, alnctl_val = 0;
+       u32 *offset;
 
-                       pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN |
-                                          PLLCTL_PLLENSRC);
-                       sdelay(340);
+       pllod = data->pll_od - 1;
 
-                       pllctl_reg_setbits(data->pll, secctl, PLLCTL_BYPASS);
-                       pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLPWRDN);
-                       sdelay(21000);
+       /* 100 micro sec for stabilization */
+       sdelay(210000);
 
-                       pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLPWRDN);
-               } else {
-                       pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN |
-                                          PLLCTL_PLLENSRC);
-                       sdelay(340);
-               }
+       tmp = pllctl_reg_read(data->pll, secctl);
 
-               pllctl_reg_write(data->pll, mult, pllm & PLLM_MULT_LO_MASK);
+       /* Check for Bypass */
+       if (tmp & SECCTL_BYPASS_MASK) {
+               setbits_le32(keystone_pll_regs[data->pll].reg1,
+                            CFG_PLLCTL1_ENSAT_MASK);
 
-               clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
-                               PLLM_MULT_HI_SMASK, (pllm << 6));
+               bypass_main_pll(data);
 
-               /* Set the BWADJ     (12 bit field)  */
-               tmp_ctl = pllm >> 1; /* Divide the pllm by 2 */
-               clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
-                               PLL_BWADJ_LO_SMASK,
-                               (tmp_ctl << PLL_BWADJ_LO_SHIFT));
-               clrsetbits_le32(keystone_pll_regs[data->pll].reg1,
-                               PLL_BWADJ_HI_MASK,
-                               (tmp_ctl >> 8));
+               /* Powerdown and powerup Main Pll */
+               pllctl_reg_setbits(data->pll, secctl, SECCTL_BYPASS_MASK);
+               pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLPWRDN_MASK);
+               /* 5 micro sec */
+               sdelay(21000);
 
-               /*
-                * Set the pll divider (6 bit field) *
-                * PLLD[5:0] is located in MAINPLLCTL0
-                */
-               clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
-                               PLL_DIV_MASK, plld);
+               pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLPWRDN_MASK);
+       } else {
+               bypass_main_pll(data);
+       }
 
-               /* Set the OUTPUT DIVIDE (4 bit field) in SECCTL */
-               pllctl_reg_rmw(data->pll, secctl, PLL_CLKOD_SMASK,
-                              (pllod << PLL_CLKOD_SHIFT));
-               wait_for_completion(data);
+       configure_mult_div(data);
 
-               pllctl_reg_write(data->pll, div1, PLLM_RATIO_DIV1);
-               pllctl_reg_write(data->pll, div2, PLLM_RATIO_DIV2);
-               pllctl_reg_write(data->pll, div3, PLLM_RATIO_DIV3);
-               pllctl_reg_write(data->pll, div4, PLLM_RATIO_DIV4);
-               pllctl_reg_write(data->pll, div5, PLLM_RATIO_DIV5);
+       /* Program Output Divider */
+       pllctl_reg_rmw(data->pll, secctl, SECCTL_OP_DIV_MASK,
+                      ((pllod << SECCTL_OP_DIV_SHIFT) & SECCTL_OP_DIV_MASK));
 
-               pllctl_reg_setbits(data->pll, alnctl, 0x1f);
+       /* Program PLLDIVn */
+       wait_for_completion(data);
+       for (i = 0; i < PLLDIV_MAX; i++) {
+               if (i < 3)
+                       offset = pllctl_reg(data->pll, div1) + i;
+               else
+                       offset = pllctl_reg(data->pll, div4) + (i - 3);
 
+               if (divn_val[i] != -1) {
+                       __raw_writel(divn_val[i] | PLLDIV_ENABLE_MASK, offset);
+                       alnctl_val |= BIT(i);
+               }
+       }
+
+       if (alnctl_val) {
+               pllctl_reg_setbits(data->pll, alnctl, alnctl_val);
                /*
                 * Set GOSET bit in PLLCMD to initiate the GO operation
                 * to change the divide
                 */
-               pllctl_reg_setbits(data->pll, cmd, PLLSTAT_GO);
-               sdelay(1500); /* wait for the phase adj */
+               pllctl_reg_setbits(data->pll, cmd, PLLSTAT_GOSTAT_MASK);
                wait_for_completion(data);
+       }
 
-               /* Reset PLL */
-               pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLRST);
-               sdelay(21000);  /* Wait for a minimum of 7 us*/
-               pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLRST);
-               sdelay(105000); /* Wait for PLL Lock time (min 50 us) */
-
-               pllctl_reg_clrbits(data->pll, secctl, PLLCTL_BYPASS);
-
-               tmp = pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN);
+       /* Reset PLL */
+       pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLRST_MASK);
+       sdelay(21000);  /* Wait for a minimum of 7 us*/
+       pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLRST_MASK);
+       sdelay(105000); /* Wait for PLL Lock time (min 50 us) */
 
-#ifndef CONFIG_SOC_K2E
-       } else if (data->pll == TETRIS_PLL) {
-               bwadj = pllm >> 1;
-               /* 1.5 Set PLLCTL0[BYPASS] =1 (enable bypass), */
-               setbits_le32(keystone_pll_regs[data->pll].reg0,  PLLCTL_BYPASS);
-               /*
-                * Set CHIPMISCCTL1[13] = 0 (enable glitchfree bypass)
-                * only applicable for Kepler
-                */
-               clrbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN);
-               /* 2 In PLLCTL1, write PLLRST = 1 (PLL is reset) */
-               setbits_le32(keystone_pll_regs[data->pll].reg1 ,
-                            PLL_PLLRST | PLLCTL_ENSAT);
-
-               /*
-                * 3 Program PLLM and PLLD in PLLCTL0 register
-                * 4 Program BWADJ[7:0] in PLLCTL0 and BWADJ[11:8] in
-                * PLLCTL1 register. BWADJ value must be set
-                * to ((PLLM + 1) >> 1) – 1)
-                */
-               tmp = ((bwadj & PLL_BWADJ_LO_MASK) << PLL_BWADJ_LO_SHIFT) |
-                       (pllm << 6) |
-                       (plld & PLL_DIV_MASK) |
-                       (pllod << PLL_CLKOD_SHIFT) | PLLCTL_BYPASS;
-               __raw_writel(tmp, keystone_pll_regs[data->pll].reg0);
-
-               /* Set BWADJ[11:8] bits */
-               tmp = __raw_readl(keystone_pll_regs[data->pll].reg1);
-               tmp &= ~(PLL_BWADJ_HI_MASK);
-               tmp |= ((bwadj>>8) & PLL_BWADJ_HI_MASK);
-               __raw_writel(tmp, keystone_pll_regs[data->pll].reg1);
-               /*
-                * 5 Wait for at least 5 us based on the reference
-                * clock (PLL reset time)
-                */
-               sdelay(21000);  /* Wait for a minimum of 7 us*/
-
-               /* 6 In PLLCTL1, write PLLRST = 0 (PLL reset is released) */
-               clrbits_le32(keystone_pll_regs[data->pll].reg1, PLL_PLLRST);
-               /*
-                * 7 Wait for at least 500 * REFCLK cycles * (PLLD + 1)
-                * (PLL lock time)
-                */
-               sdelay(105000);
-               /* 8 disable bypass */
-               clrbits_le32(keystone_pll_regs[data->pll].reg0, PLLCTL_BYPASS);
-               /*
-                * 9 Set CHIPMISCCTL1[13] = 1 (disable glitchfree bypass)
-                * only applicable for Kepler
-                */
-               setbits_le32(KS2_MISC_CTRL, KS2_ARM_PLL_EN);
-#endif
-       } else {
-               setbits_le32(keystone_pll_regs[data->pll].reg1, PLLCTL_ENSAT);
-               /*
-                * process keeps state of Bypass bit while programming
-                * all other DDR PLL settings
-                */
-               tmp = __raw_readl(keystone_pll_regs[data->pll].reg0);
-               tmp &= PLLCTL_BYPASS;   /* clear everything except Bypass */
+       /* Enable PLL */
+       pllctl_reg_clrbits(data->pll, secctl, SECCTL_BYPASS_MASK);
+       pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN_MASK);
+}
 
-               /*
-                * Set the BWADJ[7:0], PLLD[5:0] and PLLM to PLLCTL0,
-                * bypass disabled
-                */
-               bwadj = pllm >> 1;
-               tmp |= ((bwadj & PLL_BWADJ_LO_MASK) << PLL_BWADJ_LO_SHIFT) |
-                       (pllm << PLL_MULT_SHIFT) |
-                       (plld & PLL_DIV_MASK) |
-                       (pllod << PLL_CLKOD_SHIFT);
-               __raw_writel(tmp, keystone_pll_regs[data->pll].reg0);
-
-               /* Set BWADJ[11:8] bits */
-               tmp = __raw_readl(keystone_pll_regs[data->pll].reg1);
-               tmp &= ~(PLL_BWADJ_HI_MASK);
-               tmp |= ((bwadj >> 8) & PLL_BWADJ_HI_MASK);
-
-               __raw_writel(tmp, keystone_pll_regs[data->pll].reg1);
-
-               /* Reset bit: bit 14 for both DDR3 & PASS PLL */
-               tmp = PLL_PLLRST;
-               /* Set RESET bit = 1 */
-               setbits_le32(keystone_pll_regs[data->pll].reg1, tmp);
-               /* Wait for a minimum of 7 us*/
-               sdelay(21000);
-               /* Clear RESET bit */
-               clrbits_le32(keystone_pll_regs[data->pll].reg1, tmp);
-               sdelay(105000);
+void configure_secondary_pll(const struct pll_init_data *data)
+{
+       int pllod = data->pll_od - 1;
+
+       /* Enable Bypass mode */
+       setbits_le32(keystone_pll_regs[data->pll].reg1, CFG_PLLCTL1_ENSAT_MASK);
+       setbits_le32(keystone_pll_regs[data->pll].reg0,
+                    CFG_PLLCTL0_BYPASS_MASK);
+
+       /* Enable Glitch free bypass for ARM PLL */
+       if (cpu_is_k2hk() && data->pll == TETRIS_PLL)
+               clrbits_le32(KS2_MISC_CTRL, MISC_CTL1_ARM_PLL_EN);
+
+       configure_mult_div(data);
+
+       /* Program Output Divider */
+       clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
+                       CFG_PLLCTL0_CLKOD_MASK,
+                       (pllod << CFG_PLLCTL0_CLKOD_SHIFT) &
+                       CFG_PLLCTL0_CLKOD_MASK);
+
+       /* Reset PLL */
+       setbits_le32(keystone_pll_regs[data->pll].reg1, CFG_PLLCTL1_RST_MASK);
+       /* Wait for 5 micro seconds */
+       sdelay(21000);
+
+       /* Select the Output of PASS PLL as input to PASS */
+       if (data->pll == PASS_PLL)
+               setbits_le32(keystone_pll_regs[data->pll].reg1,
+                            CFG_PLLCTL1_PAPLL_MASK);
+
+       /* Select the Output of ARM PLL as input to ARM */
+       if (data->pll == TETRIS_PLL)
+               setbits_le32(KS2_MISC_CTRL, MISC_CTL1_ARM_PLL_EN);
+
+       clrbits_le32(keystone_pll_regs[data->pll].reg1, CFG_PLLCTL1_RST_MASK);
+       /* Wait for 500 * REFCLK cucles * (PLLD + 1) */
+       sdelay(105000);
+
+       /* Switch to PLL mode */
+       clrbits_le32(keystone_pll_regs[data->pll].reg0,
+                    CFG_PLLCTL0_BYPASS_MASK);
+}
 
-               /* clear BYPASS (Enable PLL Mode) */
-               clrbits_le32(keystone_pll_regs[data->pll].reg0, PLLCTL_BYPASS);
-               sdelay(21000);  /* Wait for a minimum of 7 us*/
-       }
+void init_pll(const struct pll_init_data *data)
+{
+       if (data->pll == MAIN_PLL)
+               configure_main_pll(data);
+       else
+               configure_secondary_pll(data);
 
        /*
         * This is required to provide a delay between multiple
@@ -257,16 +239,3 @@ inline int get_max_dev_speed(void)
 {
        return get_max_speed((read_efuse_bootrom() >> 16) & 0xffff, dev_speeds);
 }
-
-void pass_pll_pa_clk_enable(void)
-{
-       u32 reg;
-
-       reg = readl(keystone_pll_regs[PASS_PLL].reg1);
-
-       reg |= PLLCTL_PAPLL;
-       writel(reg, keystone_pll_regs[PASS_PLL].reg1);
-
-       /* wait till clock is enabled */
-       sdelay(15000);
-}
index d013b830ed5c4243453ec3768a4497e90b660f28..68e15ac9ac0ae5f30fd0eacb434d7bb306cf234b 100644 (file)
@@ -55,6 +55,7 @@ enum pll_type_e {
        CORE_PLL,
        PASS_PLL,
        DDR3_PLL,
+       TETRIS_PLL,
 };
 
 enum {
index 9f6cfb265f4342f3b9e36b682cbb541462846397..8d4cad209f6256acc9f4257c4dcbc1c91f64e26d 100644 (file)
@@ -52,13 +52,13 @@ struct pll_init_data {
 extern const struct keystone_pll_regs keystone_pll_regs[];
 extern int dev_speeds[];
 extern int arm_speeds[];
+extern s16 divn_val[];
 
 void init_plls(int num_pll, struct pll_init_data *config);
 void init_pll(const struct pll_init_data *data);
 unsigned long clk_get_rate(unsigned int clk);
 unsigned long clk_round_rate(unsigned int clk, unsigned long hz);
 int clk_set_rate(unsigned int clk, unsigned long hz);
-void pass_pll_pa_clk_enable(void);
 int get_max_dev_speed(void);
 int get_max_arm_speed(void);
 
index 85a046b89a92c11620512795cbb5210cb97eaa07..1c9dc3e7450271c63066ea2ff8cd53da1216a315 100644 (file)
@@ -69,7 +69,6 @@ static struct pllctl_regs *pllctl_regs[] = {
 
 #define pll0div_read(N) ((pllctl_reg_read(CORE_PLL, div##N) & 0xff) + 1)
 
-/* PLLCTL Bits */
 #define PLLCTL_BYPASS           BIT(23)
 #define PLL_PLLRST              BIT(14)
 #define PLLCTL_PAPLL            BIT(13)
@@ -102,10 +101,67 @@ static struct pllctl_regs *pllctl_regs[] = {
 #define PLL_BWADJ_LO_SMASK      (PLL_BWADJ_LO_MASK << PLL_BWADJ_LO_SHIFT)
 #define PLL_BWADJ_HI_MASK       0xf
 
-#define PLLM_RATIO_DIV1         (PLLDIV_ENABLE | 0x0)
-#define PLLM_RATIO_DIV2         (PLLDIV_ENABLE | 0x0)
-#define PLLM_RATIO_DIV3         (PLLDIV_ENABLE | 0x1)
-#define PLLM_RATIO_DIV4         (PLLDIV_ENABLE | 0x4)
-#define PLLM_RATIO_DIV5         (PLLDIV_ENABLE | 0x17)
+/* PLLCTL Bits */
+#define PLLCTL_PLLENSRC_SHIF   5
+#define PLLCTL_PLLENSRC_MASK   BIT(5)
+#define PLLCTL_PLLRST_SHIFT    3
+#define PLLCTL_PLLRST_MASK     BIT(3)
+#define PLLCTL_PLLPWRDN_SHIFT  1
+#define PLLCTL_PLLPWRDN_MASK   BIT(1)
+#define PLLCTL_PLLEN_SHIFT     0
+#define PLLCTL_PLLEN_MASK      BIT(0)
+
+/* SECCTL Bits */
+#define SECCTL_BYPASS_SHIFT    23
+#define SECCTL_BYPASS_MASK     BIT(23)
+#define SECCTL_OP_DIV_SHIFT    19
+#define SECCTL_OP_DIV_MASK     (0xf << 19)
+
+/* PLLM Bits */
+#define PLLM_MULT_LO_SHIFT     0
+#define PLLM_MULT_LO_MASK      0x3f
+#define PLLM_MULT_LO_BITS      6
+
+/* PLLDIVn Bits */
+#define PLLDIV_ENABLE_SHIFT    15
+#define PLLDIV_ENABLE_MASK     BIT(15)
+#define PLLDIV_RATIO_SHIFT     0x0
+#define PLLDIV_RATIO_MASK      0xff
+#define PLLDIV_MAX             16
+
+/* PLLCMD Bits */
+#define PLLCMD_GOSET_SHIFT     0
+#define PLLCMD_GOSET_MASK      BIT(0)
+
+/* PLLSTAT Bits */
+#define PLLSTAT_GOSTAT_SHIFT   0
+#define PLLSTAT_GOSTAT_MASK    BIT(0)
+
+/* Device Config PLLCTL0 */
+#define CFG_PLLCTL0_BWADJ_SHIFT                24
+#define CFG_PLLCTL0_BWADJ_MASK         (0xff << 24)
+#define CFG_PLLCTL0_BWADJ_BITS         8
+#define CFG_PLLCTL0_BYPASS_SHIFT       23
+#define CFG_PLLCTL0_BYPASS_MASK                BIT(23)
+#define CFG_PLLCTL0_CLKOD_SHIFT                19
+#define CFG_PLLCTL0_CLKOD_MASK         (0xf << 19)
+#define CFG_PLLCTL0_PLLM_HI_SHIFT      12
+#define CFG_PLLCTL0_PLLM_HI_MASK       (0x7f << 12)
+#define CFG_PLLCTL0_PLLM_SHIFT         6
+#define CFG_PLLCTL0_PLLM_MASK          (0x1fff << 6)
+#define CFG_PLLCTL0_PLLD_SHIFT         0
+#define CFG_PLLCTL0_PLLD_MASK          0x3f
+
+/* Device Config PLLCTL1 */
+#define CFG_PLLCTL1_RST_SHIFT  14
+#define CFG_PLLCTL1_RST_MASK   BIT(14)
+#define CFG_PLLCTL1_PAPLL_SHIFT        13
+#define CFG_PLLCTL1_PAPLL_MASK BIT(13)
+#define CFG_PLLCTL1_ENSAT_SHIFT        6
+#define CFG_PLLCTL1_ENSAT_MASK BIT(6)
+#define CFG_PLLCTL1_BWADJ_SHIFT        0
+#define CFG_PLLCTL1_BWADJ_MASK 0xf
+
+#define MISC_CTL1_ARM_PLL_EN   BIT(13)
 
 #endif  /* _CLOCK_DEFS_H_ */
index 0cefb340440337951d8a01138a7177d3bc349139..859a26011c4c67d69b1524ca58883c5e43da0407 100644 (file)
@@ -80,7 +80,6 @@ int board_eth_init(bd_t *bis)
                return -1;
        if (psc_enable_module(KS2_LPSC_CRYPTO))
                return -1;
-       pass_pll_pa_clk_enable();
 
        port_num = get_num_eth_ports();
 
index 43dfc48a53da2085f699450c698dd34af2d71163..98acc96e1c1b5f6045c687c5d340db27cf1634a8 100644 (file)
@@ -36,6 +36,10 @@ static struct pll_init_data core_pll_config[] = {
        CORE_PLL_1500,
 };
 
+s16 divn_val[16] = {
+       0, 0, 1, 4, 23, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
+};
+
 static struct pll_init_data pa_pll_config =
        PASS_PLL_1000;
 
index ed181f44b8974a229b23b8fd838e02c304ebe94c..cb64934c24155488cbf699c13de05aea2c3f4347 100644 (file)
@@ -35,6 +35,10 @@ static struct pll_init_data core_pll_config[] = {
        CORE_PLL_1200,
 };
 
+s16 divn_val[16] = {
+       0, 0, 1, 4, 23, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
+};
+
 static struct pll_init_data tetris_pll_config[] = {
        TETRIS_PLL_800,
        TETRIS_PLL_1000,
index 729a19323957653d777f6f9cb8a7c0f370e726f1..2c433ee01a7feac932a39bbd6a2d31980c70124b 100644 (file)
@@ -31,6 +31,10 @@ static struct pll_init_data core_pll_config[] = {
        CORE_PLL_1198,
 };
 
+s16 divn_val[16] = {
+       0, 0, 1, 4, 23, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
+};
+
 static struct pll_init_data tetris_pll_config[] = {
        TETRIS_PLL_799,
        TETRIS_PLL_1000,