Merge http://www.denx.de/git/u-boot
authorAubrey Li <aubrey.adi@gmail.com>
Tue, 20 Mar 2007 14:58:25 +0000 (22:58 +0800)
committerAubrey Li <aubrey.adi@gmail.com>
Tue, 20 Mar 2007 14:58:25 +0000 (22:58 +0800)
board/amcc/ebony/init.S
board/sc3/Makefile
include/configs/PCI405.h
include/configs/ebony.h
include/configs/jupiter.h
include/configs/sc3.h

index cc8f8b444e08ed368f4720b65be92336f324429c..c86076e806914f344efb5143d3abf22c3384739b 100644 (file)
 
 #include <ppc_asm.tmpl>
 #include <config.h>
-
-/* General */
-#define TLB_VALID   0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K      0x00000000
-#define SZ_4K      0x00000010
-#define SZ_16K     0x00000020
-#define SZ_64K     0x00000030
-#define SZ_256K            0x00000040
-#define SZ_1M      0x00000050
-#define SZ_16M     0x00000070
-#define SZ_256M            0x00000090
-
-/* Storage attributes */
-#define SA_W       0x00000800      /* Write-through */
-#define SA_I       0x00000400      /* Caching inhibited */
-#define SA_M       0x00000200      /* Memory coherence */
-#define SA_G       0x00000100      /* Guarded */
-#define SA_E       0x00000080      /* Endian */
-
-/* Access control */
-#define AC_X       0x00000024      /* Execute */
-#define AC_W       0x00000012      /* Write */
-#define AC_R       0x00000009      /* Read */
-
-/* Some handy macros */
-
-#define EPN(e)         ((e) & 0xfffffc00)
-#define TLB0(epn,sz)   ( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)                ( (a)&0x00000fbf )
-
-#define tlbtab_start\
-       mflr    r1  ;\
-       bl 0f       ;
-
-#define tlbtab_end\
-       .long 0, 0, 0   ;   \
-0:     mflr    r0      ;   \
-       mtlr    r1      ;   \
-       blr             ;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
-       .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
+#include <asm-ppc/mmu.h>
 
 /**************************************************************************
  * TLB TABLE
  *
  *************************************************************************/
 
-    .section .bootpg,"ax"
-    .globl tlbtab
+       .section .bootpg,"ax"
+       .globl tlbtab
 
 tlbtab:
-    tlbtab_start
-    tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
-    tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
-    tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
-    tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
-    tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-    tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
-    tlbtab_end
+       tlbtab_start
+
+       tlbentry(0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+       /*
+        * TLB entries for SDRAM are not needed on this platform.
+        * They are dynamically generated in the SPD DDR(2) detection
+        * routine.
+        */
+
+       tlbentry(CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+       tlbentry(CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X)
+       tlbentry(CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X)
+       tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I)
+       tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I)
+       tlbtab_end
index 1b0b15fc6262ca8588536372400c0117e8e40877..4cc2b4171ca2c5a382a7756a8e67225a2c1c76cb 100644 (file)
 
 include $(TOPDIR)/config.mk
 
-LIB    = lib$(BOARD).a
+LIB    = $(obj)lib$(BOARD).a
 
-OBJS   = $(BOARD).o sc3nand.o
+COBJS  = $(BOARD).o sc3nand.o
 SOBJS  = init.o
 
+SRCS   := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS   := $(addprefix $(obj),$(COBJS))
+SOBJS  := $(addprefix $(obj),$(SOBJS))
+
 $(LIB):        $(OBJS) $(SOBJS)
-       $(AR) crv $@ $^
+       $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
 clean:
        rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean:    clean
 
 #########################################################################
 
-.depend:       Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-               $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
 
-sinclude .depend
+sinclude $(obj).depend
 
 #########################################################################
index 9d5c4f4d04e7eac95f133d0ed41760cd77ece19a..027dd22bf4676fd544b0372bd698b3ccbbed38e7 100644 (file)
@@ -1,6 +1,9 @@
 /*
+ * (C) Copyright 2007
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com
+ *
  * (C) Copyright 2001-2004
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -32,8 +35,6 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_IDENT_STRING     " $Name: esd_PCI405_05_07_28 $"
-
 #define CONFIG_405GP           1       /* This is a PPC405 CPU         */
 #define CONFIG_4xx             1       /* ...member of PPC4xx family   */
 #define CONFIG_PCI405          1       /* ...on a PCI405 board         */
@@ -53,9 +54,9 @@
        "mem_linux=14336k\0"                                            \
        "optargs=panic=0\0"                                             \
        "ramargs=setenv bootargs mem=$mem_linux root=/dev/ram rw\0"     \
-       "addcon=setenv bootargs $bootargs console=ttyS0,$baudrate $optargs\0" \
+       "addcons=setenv bootargs $bootargs console=ttyS0,$baudrate $optargs\0" \
        ""
-#define        CONFIG_BOOTCOMMAND      "run ramargs;run addcon;loadpci"
+#define        CONFIG_BOOTCOMMAND      "run ramargs;run addcons;loadpci"
 
 #define CONFIG_PREBOOT                  /* enable preboot variable      */
 
index 6c4d7cc4fe5bb16a06729cd0872fa217dc6bc71a..a42319b097d094cbe6c19a5698e31967e8374c23 100644 (file)
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
-#define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for setup     */
-#define SPD_EEPROM_ADDRESS {0x53,0x52}  /* SPD i2c spd addresses        */
+#define CONFIG_SPD_EEPROM      1       /* Use SPD EEPROM for setup     */
+#define SPD_EEPROM_ADDRESS {0x53,0x52} /* SPD i2c spd addresses        */
+#define CONFIG_PROG_SDRAM_TLB  1       /* setup SDRAM TLB's dynamically*/
 
 /*-----------------------------------------------------------------------
  * I2C
index 48056a3a16344a9ec6e000da0270adda4adcfc6f..5b97526fc49496559bd6466c75a859051fd6add0 100644 (file)
        "addip=setenv bootargs ${bootargs} "                            \
                "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
                ":${hostname}:${netdev}:off panic=1\0"                  \
-       "flash_nfs=run nfsargs addip;"                                  \
+       "flash_nfs=run nfsargs addip addcons;"                          \
                "bootm ${kernel_addr}\0"                                \
        "flash_self=run ramargs addip;"                                 \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
-       "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
-       "rootpath=/opt/eldk/ppc_82xx\0"                                 \
+       "addcons=setenv bootargs ${bootargs} console=${contyp},"        \
+               "${baudrate}\0"                                         \
+       "contyp=ttyS0\0"                                                \
+       "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;"    \
+               "bootm\0"                                               \
+       "rootpath=/opt/eldk/ppc_6xx\0"                                  \
        "bootfile=/tftpboot/jupiter/uImage\0"                           \
        ""
 
 #define CFG_ENV_SECT_SIZE      0x20000
 #define CONFIG_ENV_OVERWRITE   1
 
+/* Address and size of Redundant Environment Sector    */
+#define CFG_ENV_ADDR_REDUND    (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND    (CFG_ENV_SIZE)
+
 /*
  * Memory map
  */
  */
 #define CFG_LONGHELP                   /* undef to save memory     */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt   */
+
+#define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
+#define CFG_HUSH_PARSER                1       /* Use the HUSH parser          */
+#ifdef CFG_HUSH_PARSER
+#define        CFG_PROMPT_HUSH_PS2     "> "
+#endif
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size  */
 #else
index f2f059863d825f0264dec8e7237ac3befc737599..8298084f1ea9ac3a05d5b4ee8c779550760e2594 100644 (file)
        "addip=setenv bootargs ${bootargs} "                            \
                "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
                ":${hostname}:${netdev}:off panic=1\0"                  \
-       "flash_nfs=run nfsargs addip;"                                  \
+       "addcons=setenv bootargs ${bootargs} "                          \
+               "console=ttyS0,${baudrate}\0"                           \
+       "flash_nfs=run nfsargs addip addcons;"                          \
                "bootm ${kernel_addr}\0"                                \
-       "flash_nand=run nand_args addip addcon;bootm ${kernel_addr}\0"  \
-       "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
+       "flash_nand=run nand_args addip addcons;bootm ${kernel_addr}\0" \
+       "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;"    \
+               "bootm\0"                                               \
        "rootpath=/opt/eldk/ppc_4xx\0"                                  \
        "bootfile=/tftpboot/sc3/uImage\0"                               \
        "u-boot=/tftpboot/sc3/u-boot.bin\0"                             \