Add support for the Calao SBC35-A9G20 board
authorAlbin Tonnerre <albin.tonnerre@free-electrons.com>
Mon, 24 Aug 2009 16:03:26 +0000 (18:03 +0200)
committerJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Tue, 1 Sep 2009 20:13:37 +0000 (22:13 +0200)
The Calao SBC35-A9G20 board is manufactured and sold by Calao Systems
<http://www.calao-systems.com>. It is built around an AT91SAM9G20 ARM SoC
running at 400MHz. It features an Ethernet port, an SPI RTC backed by an onboard
battery , an SD/MMC slot, a CompactFlash slot, 64Mo of SDRAM, 256Mo of NAND
flash, two USB host ports, and an USB device port. More informations can be
found at <http://www.calao-systems.com/articles.php?lng=en&pg=5936>

Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
MAINTAINERS
MAKEALL
Makefile
board/calao/sbc35_a9g20/Makefile [new file with mode: 0644]
board/calao/sbc35_a9g20/config.mk [new file with mode: 0644]
board/calao/sbc35_a9g20/sbc35_a9g20.c [new file with mode: 0644]
board/calao/sbc35_a9g20/spi.c [new file with mode: 0644]
cpu/arm926ejs/at91/at91sam9260_devices.c
include/configs/sbc35_a9g20.h [new file with mode: 0644]

index 0d4a978399d9d611802f1a93ee8e92b39e219743..a971b2fe336dc73556d6e53a05ddcd2805cfece6 100644 (file)
@@ -690,6 +690,10 @@ Andrea Scian <andrea.scian@dave-tech.it>
 
        B2              ARM7TDMI (S3C44B0X)
 
+Albin Tonnerre <albin.tonnerre@free-electrons.com>
+
+       sbc35_a9g20     ARM926EJS (AT91SAM9G20 SoC)
+
 Greg Ungerer <greg.ungerer@opengear.com>
 
        cm4008          ks8695p
diff --git a/MAKEALL b/MAKEALL
index 48facb8af6df34db13ae7eb69917ef97521f1d71..aeca193acbe33ecf817edfda95cde6293ec6d445 100755 (executable)
--- a/MAKEALL
+++ b/MAKEALL
@@ -613,6 +613,7 @@ LIST_at91="                 \
        m501sk                  \
        pm9261                  \
        pm9263                  \
+       SBC35_A9G20     \
 "
 
 #########################################################################
index bffc036b2d392189564d53046313f01fe9b41d69..ee464eb83d2fe92d7297c8871252be2545a12423 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -2897,6 +2897,13 @@ at91sam9g45ekes_config   :       unconfig
 pm9263_config  :       unconfig
        @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
 
+SBC35_A9G20_NANDFLASH_config \
+SBC35_A9G20_EEPROM_config \
+SBC35_A9G20_config     :       unconfig
+       @mkdir -p $(obj)include
+       @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
+       @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
+
 ########################################################################
 ## ARM Integrator boards - see doc/README-integrator for more info.
 integratorap_config    \
diff --git a/board/calao/sbc35_a9g20/Makefile b/board/calao/sbc35_a9g20/Makefile
new file mode 100644 (file)
index 0000000..8b4a911
--- /dev/null
@@ -0,0 +1,55 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB    = $(obj)lib$(BOARD).a
+
+COBJS-y        += sbc35_a9g20.o
+COBJS-$(CONFIG_ATMEL_SPI)      += spi.o
+
+SRCS   := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS   := $(addprefix $(obj),$(COBJS-y))
+SOBJS  := $(addprefix $(obj),$(SOBJS))
+
+$(LIB):        $(obj).depend $(OBJS) $(SOBJS)
+       $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+       rm -f $(SOBJS) $(OBJS)
+
+distclean:     clean
+       rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/calao/sbc35_a9g20/config.mk b/board/calao/sbc35_a9g20/config.mk
new file mode 100644 (file)
index 0000000..ff2cfd1
--- /dev/null
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000
diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c b/board/calao/sbc35_a9g20/sbc35_a9g20.c
new file mode 100644 (file)
index 0000000..da34b40
--- /dev/null
@@ -0,0 +1,197 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Copyright (C) 2009
+ * Albin Tonnerre, Free-Electrons <albin.tonnerre@free-electrons.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91sam9260_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_CMD_NAND
+static void sbc35_a9g20_nand_hw_init(void)
+{
+       unsigned long csa;
+
+       /* Enable CS3 */
+       csa = at91_sys_read(AT91_MATRIX_EBICSA);
+       at91_sys_write(AT91_MATRIX_EBICSA,
+                      csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+       /* Configure SMC CS3 for NAND/SmartMedia */
+       at91_sys_write(AT91_SMC_SETUP(3),
+                      AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+                      AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
+       at91_sys_write(AT91_SMC_PULSE(3),
+                      AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+                      AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+       at91_sys_write(AT91_SMC_CYCLE(3),
+                      AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+       at91_sys_write(AT91_SMC_MODE(3),
+                      AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+                      AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+                      AT91_SMC_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+                      AT91_SMC_DBW_8 |
+#endif
+                      AT91_SMC_TDF_(2));
+
+       at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
+
+       /* Configure RDY/BSY */
+       at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+       /* Enable NandFlash */
+       at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void sbc35_a9g20_macb_hw_init(void)
+{
+       unsigned long rstc;
+
+       /* Enable clock */
+       at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
+
+       /*
+        * Disable pull-up on:
+        *      RXDV (PA17) => PHY normal mode (not Test mode)
+        *      ERX0 (PA14) => PHY ADDR0
+        *      ERX1 (PA15) => PHY ADDR1
+        *      ERX2 (PA25) => PHY ADDR2
+        *      ERX3 (PA26) => PHY ADDR3
+        *      ECRS (PA28) => PHY ADDR4  => PHYADDR = 0x0
+        *
+        * PHY has internal pull-down
+        */
+       writel(pin_to_mask(AT91_PIN_PA14) |
+              pin_to_mask(AT91_PIN_PA15) |
+              pin_to_mask(AT91_PIN_PA17) |
+              pin_to_mask(AT91_PIN_PA25) |
+              pin_to_mask(AT91_PIN_PA26) |
+              pin_to_mask(AT91_PIN_PA28),
+              pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
+
+       rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
+
+       /* Need to reset PHY -> 500ms reset */
+       at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+                                    (AT91_RSTC_ERSTL & (0x0D << 8)) |
+                                    AT91_RSTC_URSTEN);
+
+       at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+
+       /* Wait for end hardware reset */
+       while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
+
+       /* Restore NRST value */
+       at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+                                    (rstc) |
+                                    AT91_RSTC_URSTEN);
+
+       /* Re-enable pull-up */
+       writel(pin_to_mask(AT91_PIN_PA14) |
+              pin_to_mask(AT91_PIN_PA15) |
+              pin_to_mask(AT91_PIN_PA17) |
+              pin_to_mask(AT91_PIN_PA25) |
+              pin_to_mask(AT91_PIN_PA26) |
+              pin_to_mask(AT91_PIN_PA28),
+              pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
+
+       at91_macb_hw_init();
+}
+#endif
+
+int board_init(void)
+{
+       /* Enable Ctrlc */
+       console_init_f();
+
+       gd->bd->bi_arch_number = MACH_TYPE_SBC35_A9G20;
+       /* adress of boot parameters */
+       gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+       at91_serial_hw_init();
+       sbc35_a9g20_nand_hw_init();
+#ifdef CONFIG_ATMEL_SPI
+       at91_spi0_hw_init(1 << 4 | 1 << 5);
+#endif
+#ifdef CONFIG_MACB
+       sbc35_a9g20_macb_hw_init();
+#endif
+
+       return 0;
+}
+
+int dram_init(void)
+{
+       gd->bd->bi_dram[0].start = PHYS_SDRAM;
+       if(get_ram_size((long *) PHYS_SDRAM, PHYS_SDRAM_SIZE) != PHYS_SDRAM_SIZE)
+               return -1;
+
+       gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+       return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_MACB
+       /*
+        * Initialize ethernet HW addr prior to starting Linux,
+        * needed for nfsroot
+        */
+       eth_init(gd->bd);
+#endif
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+       int rc = 0;
+#ifdef CONFIG_MACB
+       rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
+#endif
+       return rc;
+}
diff --git a/board/calao/sbc35_a9g20/spi.c b/board/calao/sbc35_a9g20/spi.c
new file mode 100644 (file)
index 0000000..1057fa2
--- /dev/null
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2009
+ * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_spi.h>
+#include <asm/arch/gpio.h>
+#include <spi.h>
+
+#define SBC_A9260_CS0_PIN      AT91_PIN_PA3
+#define SBC_A9260_CS1_PIN      AT91_PIN_PC11
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+       return bus == 0 && (cs == 1 || cs == 0);
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+       if(slave->cs == 0)
+               at91_set_gpio_value(SBC_A9260_CS0_PIN, 0);
+       else if(slave->cs == 1)
+               at91_set_gpio_value(SBC_A9260_CS1_PIN, 0);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+       if(slave->cs == 0)
+               at91_set_gpio_value(SBC_A9260_CS0_PIN, 1);
+       else if(slave->cs == 1)
+               at91_set_gpio_value(SBC_A9260_CS1_PIN, 1);
+}
+
+void spi_init_f(void)
+{
+       /* everything done in board_init */
+}
index 5309ba282a5272135581942047af15a3bfad19f7..f86cb99da65e4d927099a9dcac152038a840a1b9 100644 (file)
@@ -75,7 +75,7 @@ void at91_serial_hw_init(void)
 #endif
 }
 
-#ifdef CONFIG_HAS_DATAFLASH
+#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
 void at91_spi0_hw_init(unsigned long cs_mask)
 {
        at91_set_A_periph(AT91_PIN_PA0, 0);     /* SPI0_MISO */
diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h
new file mode 100644 (file)
index 0000000..f4b3477
--- /dev/null
@@ -0,0 +1,194 @@
+/*
+ * Copyright (C) 2009
+ * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
+ *
+ * Configuation settings for the Calao SBC35-A9G20 board
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#if defined(CONFIG_SBC35_A9G20_NANDFLASH) || defined(CONFIG_SBC35_A9G20_EEPROM)
+#define CONFIG_SBC35_A9G20
+#endif
+
+#define CONFIG_AT91SAM9G20
+
+#if defined(CONFIG_SBC35_A9G20_NANDFLASH)
+#define CONFIG_ENV_IS_IN_NAND
+#else
+#define CONFIG_ENV_IS_IN_EEPROM
+#endif
+
+/* ARM asynchronous clock */
+#define AT91_MAIN_CLOCK                12000000        /* 12.000 MHz crystal */
+#define CONFIG_SYS_HZ          1000
+
+#define CONFIG_ARM926EJS       1       /* This is an ARM926EJS Core    */
+
+#define CONFIG_ARCH_CPU_INIT
+#undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff  */
+
+#define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS       1
+#define CONFIG_INITRD_TAG              1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#undef CONFIG_USART3
+
+#define CONFIG_BOOTDELAY       3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE      1
+#define CONFIG_BOOTP_BOOTPATH          1
+#define CONFIG_BOOTP_GATEWAY           1
+#define CONFIG_BOOTP_HOSTNAME          1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
+
+#define CONFIG_CMD_PING                1
+#define CONFIG_CMD_DHCP                1
+#define CONFIG_CMD_USB         1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS   1
+#define PHYS_SDRAM             0x20000000
+#define PHYS_SDRAM_SIZE                0x04000000      /* 64 megs */
+
+/* SPI EEPROM */
+#define CONFIG_SPI
+#define CONFIG_CMD_SPI
+#define CONFIG_ATMEL_SPI
+#define CONFIG_SYS_SPI_WRITE_TOUT      (5 * CONFIG_SYS_HZ)
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_SPI_M95XXX
+#define CONFIG_SYS_EEPROM_SIZE 0x10000
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
+
+/* SPI RTC */
+#define CONFIG_CMD_DATE
+#define CONFIG_RTC_M41T94
+#define CONFIG_M41T94_SPI_BUS 0
+#define CONFIG_M41T94_SPI_CS 0
+
+/* NAND flash */
+#define CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE             1
+#define CONFIG_SYS_NAND_BASE                   0x40000000
+#define CONFIG_SYS_NAND_DBW_8                  1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE               (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE               (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN             AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN              AT91_PIN_PC13
+
+/* NOR flash - no real flash on this board */
+#define CONFIG_SYS_NO_FLASH                    1
+
+/* Ethernet */
+#define CONFIG_MACB                    1
+#define CONFIG_RMII                    1
+#define CONFIG_NET_MULTI               1
+#define CONFIG_NET_RETRY_COUNT         20
+#define CONFIG_RESET_PHY_R             1
+#define CONFIG_MACB_SEARCH_PHY         1
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW            1
+#define CONFIG_DOS_PARTITION           1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT   1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE  0x00500000      /* AT91SAM9260_UHP_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME  "at91sam9260"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
+#define CONFIG_USB_STORAGE             1
+#define CONFIG_CMD_FAT                 1
+
+#define CONFIG_SYS_LOAD_ADDR           0x22000000      /* load address */
+
+#define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END         0x23e00000
+
+/* Env in EEPROM, bootstrap + u-boot in NAND*/
+#ifdef CONFIG_ENV_IS_IN_EEPROM
+#define CONFIG_ENV_OFFSET      0x20
+#define CONFIG_ENV_SIZE                0x1000
+#endif
+
+/* Env, bootstrap and u-boot in NAND */
+#ifdef CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET              0x60000
+#define CONFIG_ENV_OFFSET_REDUND       0x80000
+#define CONFIG_ENV_SIZE                        0x20000
+#endif
+
+#define CONFIG_BOOTCOMMAND     "nboot 0x21000000 0 400000"
+#define CONFIG_BOOTARGS                "console=ttyS0,115200 " \
+                               "root=/dev/mtdblock1 " \
+                               "mtdparts=atmel_nand:16M(kernel)ro," \
+                               "120M(rootfs),-(other) " \
+                               "rw rootfstype=jffs2"
+
+#define CONFIG_BAUDRATE                        115200
+#define CONFIG_SYS_BAUDRATE_TABLE      {115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT      "U-Boot> "
+#define CONFIG_SYS_CBSIZE      256
+#define CONFIG_SYS_MAXARGS     16
+#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP    1
+#define CONFIG_CMDLINE_EDITING 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN  ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE       128     /* 128 bytes for initial data */
+#define CONFIG_STACKSIZE               (32 * 1024)     /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif