Coding Style cleanup: replace leading SPACEs by TABs
authorWolfgang Denk <wd@denx.de>
Fri, 4 Oct 2013 15:43:24 +0000 (17:43 +0200)
committerTom Rini <trini@ti.com>
Mon, 14 Oct 2013 20:06:54 +0000 (16:06 -0400)
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Drop changes for PEP 4 following python tools]
Signed-off-by: Tom Rini <trini@ti.com>
116 files changed:
MAKEALL
README
arch/arm/config.mk
arch/arm/cpu/armv7/mx5/lowlevel_init.S
arch/arm/dts/exynos5250.dtsi
arch/arm/lib/relocate.S
arch/blackfin/cpu/traps.c
arch/blackfin/include/asm/mach-common/bits/lockbox.h
arch/m68k/lib/traps.c
arch/nios2/cpu/epcs.c
arch/nios2/lib/libgcc.c
arch/openrisc/cpu/cpu.c
arch/powerpc/cpu/mpc83xx/cpu_init.c
arch/powerpc/cpu/mpc83xx/pci.c
arch/powerpc/cpu/ppc4xx/4xx_pci.c
board/Barix/ipam390/README.ipam390
board/altera/common/sevenseg.c
board/boundary/nitrogen6x/6x_upgrade.txt
board/chromebook-x86/dts/alex.dts
board/chromebook-x86/dts/link.dts
board/cobra5272/bdm/cobra5272_uboot.gdb
board/cogent/flash.c
board/cray/L1/bootscript.hush
board/esd/common/lcd.h
board/esd/cpci750/ide.c
board/esd/cpci750/pci.c
board/etin/debris/flash.c
board/evb64260/flash.c
board/evb64260/mpsc.c
board/fads/fads.c
board/freescale/b4860qds/tlb.c
board/freescale/bsc9132qds/README
board/freescale/mpc8313erdb/mpc8313erdb.c
board/freescale/mpc8360emds/mpc8360emds.c
board/funkwerk/vovpn-gw/vovpn-gw.c
board/gen860t/flash.c
board/incaip/incaip.c
board/matrix_vision/mvbc_p/Makefile
board/matrix_vision/mvsmr/Makefile
board/openrisc/openrisc-generic/or1ksim.cfg
board/ppmc8260/strataflash.c
board/pxa255_idp/pxa_reg_calcs.py
board/rbc823/rbc823.c
board/samsung/dts/exynos5250-snow.dts
board/svm_sc8xx/svm_sc8xx.c
boards.cfg
common/cmd_bmp.c
common/main.c
config.mk
doc/DocBook/Makefile
doc/README.ext4
doc/README.kwbimage
doc/README.mxc_hab
doc/README.mxsimage
doc/README.nokia_rx51
doc/README.ramboot-ppc85xx
doc/README.trace
doc/README.ubi
doc/README.zfs
doc/driver-model/UDM-cores.txt
doc/driver-model/UDM-design.txt
doc/driver-model/UDM-gpio.txt
doc/driver-model/UDM-hwmon.txt
doc/driver-model/UDM-mmc.txt
doc/driver-model/UDM-power.txt
doc/driver-model/UDM-rtc.txt
doc/driver-model/UDM-spi.txt
doc/driver-model/UDM-stdio.txt
doc/driver-model/UDM-tpm.txt
doc/driver-model/UDM-watchdog.txt
drivers/mtd/nand/fsl_elbc_spl.c
drivers/mtd/nand/fsl_upm.c
drivers/mtd/nand/nand_base.c
drivers/mtd/nand/nand_util.c
drivers/mtd/ubi/crc32.c
drivers/net/dm9000x.c
drivers/net/plb2800_eth.c
drivers/rtc/bfin_rtc.c
drivers/rtc/pl031.c
drivers/spi/mpc8xxx_spi.c
drivers/spi/omap3_spi.c
drivers/video/ati_radeon_fb.h
fs/ubifs/super.c
include/configs/DU440.h
include/configs/P3G4.h
include/configs/RBC823.h
include/configs/alpr.h
include/configs/devkit8000.h
include/configs/p3mx.h
include/configs/p3p440.h
include/configs/pcs440ep.h
include/configs/pdnb3.h
include/configs/uc100.h
include/configs/zeus.h
include/ddr_spd.h
nand_spl/nand_boot_fsl_elbc.c
post/lib_powerpc/andi.c
post/lib_powerpc/cpu_asm.h
post/lib_powerpc/rlwimi.c
post/lib_powerpc/rlwinm.c
post/lib_powerpc/rlwnm.c
post/lib_powerpc/srawi.c
post/lib_powerpc/three.c
post/lib_powerpc/threei.c
post/lib_powerpc/threex.c
post/lib_powerpc/twox.c
test/compression.c
tools/Makefile
tools/bddb/defs.php
tools/img2brec.sh
tools/imls/Makefile
tools/kernel-doc/docproc.c
tools/kernel-doc/kernel-doc
tools/reformat.py
tools/scripts/make-asm-offsets
tools/ubsha1.c

diff --git a/MAKEALL b/MAKEALL
index 956f3da2880d371e49a9c1a4b7e21116408689ad..a9253d3490a3d5cf32526c91b20800b1fcc5b715 100755 (executable)
--- a/MAKEALL
+++ b/MAKEALL
@@ -38,8 +38,8 @@ usage()
          BUILD_NCPUS      number of parallel make jobs (default: auto)
          CROSS_COMPILE    cross-compiler toolchain prefix (default: "")
          CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
-                          architecture "ARCH".  Substitute "ARCH" for any
-                          supported architecture (default: "")
+                          architecture "ARCH".  Substitute "ARCH" for any
+                          supported architecture (default: "")
          MAKEALL_LOGDIR   output all logs to here (default: ./LOG/)
          BUILD_DIR        output build directory (default: ./)
          BUILD_NBUILDS    number of parallel targets (default: 1)
diff --git a/README b/README
index cee8e2f1646d970bfe8ef8c3727978997e409ca6..09662a4a0369b2567f6b8274898b4e8b16af8595 100644 (file)
--- a/README
+++ b/README
@@ -944,10 +944,10 @@ The following options need to be configured:
 
 - Regular expression support:
                CONFIG_REGEX
-                If this variable is defined, U-Boot is linked against
-                the SLRE (Super Light Regular Expression) library,
-                which adds regex support to some commands, as for
-                example "env grep" and "setexpr".
+               If this variable is defined, U-Boot is linked against
+               the SLRE (Super Light Regular Expression) library,
+               which adds regex support to some commands, as for
+               example "env grep" and "setexpr".
 
 - Device tree:
                CONFIG_OF_CONTROL
@@ -1096,8 +1096,8 @@ The following options need to be configured:
                devices.
                CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz)
 
-                The environment variable 'scsidevs' is set to the number of
-                SCSI devices found during the last scan.
+               The environment variable 'scsidevs' is set to the number of
+               SCSI devices found during the last scan.
 
 - NETWORK Support (PCI):
                CONFIG_E1000
@@ -1987,7 +1987,7 @@ CBFS (Coreboot Filesystem) support
                    offset CONFIG_SYS_FSL_I2C_SPEED for the i2c speed and
                    CONFIG_SYS_FSL_I2C_SLAVE for the slave addr of the first
                    bus.
-                  - If your board supports a second fsl i2c bus, define
+                 - If your board supports a second fsl i2c bus, define
                    CONFIG_SYS_FSL_I2C2_OFFSET for the register offset
                    CONFIG_SYS_FSL_I2C2_SPEED for the speed and
                    CONFIG_SYS_FSL_I2C2_SLAVE for the slave address of the
@@ -3191,9 +3191,9 @@ FIT uImage format:
                CONFIG_TPL_PAD_TO
                Image offset to which the TPL should be padded before appending
                the TPL payload. By default, this is defined as
-                CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined.
-                CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL
-                payload without any padding, or >= CONFIG_SPL_MAX_SIZE.
+               CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined.
+               CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL
+               payload without any padding, or >= CONFIG_SPL_MAX_SIZE.
 
 Modem Support:
 --------------
index d0cf43ff417c996cb9f24313b8620f726fc3f184..bdabcf407e2c7cf783e4e73b05acec2031d2189c 100644 (file)
@@ -17,7 +17,7 @@ endif
 
 LDFLAGS_FINAL += --gc-sections
 PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections \
-                     -fno-common -ffixed-r9 -msoft-float
+                    -fno-common -ffixed-r9 -msoft-float
 
 # Support generic board on ARM
 __HAVE_ARCH_GENERIC_BOARD := y
index fc7c76759a77907d234216c62ac5d12d013c9ca8..25fadf64875e3aadcb20cedc41ea379e2b0b1244 100644 (file)
 
        /* reconfigure L2 cache aux control reg */
        ldr r0, =0xC0 |                 /* tag RAM */ \
-                0x4 |                  /* data RAM */ \
-                1 << 24 |              /* disable write allocate delay */ \
-                1 << 23 |              /* disable write allocate combine */ \
-                1 << 22                /* disable write allocate */
+                0x4 |                  /* data RAM */ \
+                1 << 24 |              /* disable write allocate delay */ \
+                1 << 23 |              /* disable write allocate combine */ \
+                1 << 22                /* disable write allocate */
 
 #if defined(CONFIG_MX51)
        ldr r3, [r4, #ROM_SI_REV]
@@ -290,20 +290,20 @@ setup_pll_func:
 
        setup_pll PLL1_BASE_ADDR, 800
 
-        setup_pll PLL3_BASE_ADDR, 400
+       setup_pll PLL3_BASE_ADDR, 400
 
-        /* Switch peripheral to PLL3 */
-        ldr r0, =CCM_BASE_ADDR
-        ldr r1, =0x00015154
-        str r1, [r0, #CLKCTL_CBCMR]
-        ldr r1, =0x02898945
-        str r1, [r0, #CLKCTL_CBCDR]
-        /* make sure change is effective */
+       /* Switch peripheral to PLL3 */
+       ldr r0, =CCM_BASE_ADDR
+       ldr r1, =0x00015154
+       str r1, [r0, #CLKCTL_CBCMR]
+       ldr r1, =0x02898945
+       str r1, [r0, #CLKCTL_CBCDR]
+       /* make sure change is effective */
 1:      ldr r1, [r0, #CLKCTL_CDHIPR]
-        cmp r1, #0x0
-        bne 1b
+       cmp r1, #0x0
+       bne 1b
 
-        setup_pll PLL2_BASE_ADDR, 400
+       setup_pll PLL2_BASE_ADDR, 400
 
        /* Switch peripheral to PLL2 */
        ldr r0, =CCM_BASE_ADDR
@@ -324,7 +324,7 @@ setup_pll_func:
        cmp r1, #0x0
        bne 1b
 
-        setup_pll PLL3_BASE_ADDR, 216
+       setup_pll PLL3_BASE_ADDR, 216
 
        setup_pll PLL4_BASE_ADDR, 455
 
@@ -358,13 +358,13 @@ setup_pll_func:
        str r1, [r0, #CLKCTL_CCGR6]
        str r1, [r0, #CLKCTL_CCGR7]
 
-        mov r1, #0x00000
-        str r1, [r0, #CLKCTL_CCDR]
+       mov r1, #0x00000
+       str r1, [r0, #CLKCTL_CCDR]
 
-        /* for cko - for ARM div by 8 */
-        mov r1, #0x000A0000
-        add r1, r1, #0x00000F0
-        str r1, [r0, #CLKCTL_CCOSR]
+       /* for cko - for ARM div by 8 */
+       mov r1, #0x000A0000
+       add r1, r1, #0x00000F0
+       str r1, [r0, #CLKCTL_CCOSR]
 
 #endif /* CONFIG_MX53 */
 .endm
index 1c5474f40b03af1d2b58f01460acb0cd4cdc9b46..44cbb5a2e5fe1f79ea0d0f32050d0c5838341785 100644 (file)
                reg = <0x12d40000 0x30>;
                clock-frequency = <50000000>;
                interrupts = <0 70 0>;
-        };
+       };
 
        spi@131a0000 {
                #address-cells = <1>;
index a62a55656128077890e23bb3ac170be0f464e6bf..803525156314e2b4b59a73d296965f773095041a 100644 (file)
@@ -66,9 +66,9 @@ relocate_done:
        /* ARMv4- don't know bx lr but the assembler fails to see that */
 
 #ifdef __ARM_ARCH_4__
-        mov        pc, lr
+       mov        pc, lr
 #else
-        bx        lr
+       bx        lr
 #endif
 
 ENDPROC(relocate_code)
index 20aeab81a20418cce2c00de9fdfb202b43e516b4..10f72f8246cea564ad269d305032f8299705f9ca 100644 (file)
@@ -261,7 +261,7 @@ static void decode_address(char *buf, unsigned long address)
        if (!address)
                sprintf(buf, "<0x%p> /* Maybe null pointer? */", paddr);
        else if (address >= CONFIG_SYS_MONITOR_BASE &&
-                address < CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+                address < CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
                sprintf(buf, "<0x%p> /* somewhere in u-boot */", paddr);
        else
                sprintf(buf, "<0x%p> /* unknown address */", paddr);
index 77f849e8f23f239191242d7f68c7bec809737077..17d22ab57fc6519a913d3f7f002e294a01a3f7bc 100644 (file)
@@ -16,7 +16,7 @@ typedef struct SESR_args {
        unsigned long   ulMessageSize;      /* message length in bytes            */
        unsigned long   ulSFEntryPoint;     /* entry point of secure function     */
        unsigned long   ulMessagePtr;       /* pointer to the buffer containing
-                                              the digital signature and message  */
+                                              the digital signature and message  */
        unsigned long   ulReserved1;        /* reserved                           */
        unsigned long   ulReserved2;        /* reserved                           */
 } tSESR_args;
index 55bf0c290f4e66a275342aaecfa4d82cd79cde0e..cbd410ceb7648e5df3149a313a4aa4c610014bd1 100644 (file)
@@ -20,7 +20,7 @@ extern void _int_handler(void);
 static void show_frame(struct pt_regs *fp)
 {
        printf ("Vector Number: %d  Format: %02x  Fault Status: %01x\n\n", (fp->vector & 0x3fc) >> 2,
-               fp->format, (fp->vector & 0x3) | ((fp->vector & 0xc00) >> 8));
+               fp->format, (fp->vector & 0x3) | ((fp->vector & 0xc00) >> 8));
        printf ("PC: %08lx    SR: %08lx    SP: %08lx\n", fp->pc, (long) fp->sr, (long) fp);
        printf ("D0: %08lx    D1: %08lx    D2: %08lx    D3: %08lx\n",
                fp->d0, fp->d1, fp->d2, fp->d3);
index c83f5eec4ee039b1b9ba6238546554d262631bab..9758552447babf08023e5f584033271b17031a4f 100644 (file)
@@ -475,7 +475,7 @@ void do_epcs_info (struct epcs_devinfo_t *dev, int argc, char * const argv[])
        printf ("status: 0x%02x (WIP:%d, WEL:%d, PROT:%s)\n",
                stat,
                (stat & EPCS_STATUS_WIP) ? 1 : 0,
-               (stat & EPCS_STATUS_WEL) ? 1 : 0,
+               (stat & EPCS_STATUS_WEL) ? 1 : 0,
                (stat & dev->prot_mask) ? "on" : "off" );
 
        /* Configuration  */
index 3caee193405946c0145f8adf3b469544fbb16128..cf1b8369259a5bc9ab43cd224792c59f91dea812 100644 (file)
@@ -548,7 +548,7 @@ __mulsi3 (SItype a, SItype b)
   while (cnt)
     {
       if (cnt & 1)
-        {
+       {
          res += b;
        }
       b <<= 1;
index f238fe4c60dd42eb898d71756bf4d23546d9afe9..272656a361d7b154643f93c28a599d7c95b3480a 100644 (file)
@@ -138,8 +138,8 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
        /* Code the jump to __reset here as the compiler is prone to
           emitting a bad jump instruction if the function is in flash */
        __asm__("l.movhi r1,hi(__reset);  \
-                 l.ori r1,r1,lo(__reset); \
-                 l.jr r1");
+                l.ori r1,r1,lo(__reset); \
+                l.jr r1");
        /* not reached, __reset does not return */
        return 0;
 }
index d568f889d2fc29e69c9f5587c70911d46d0c32bf..0e9ddb8e26074bfa8cb4379d9940b98e2c78e645 100644 (file)
@@ -425,15 +425,15 @@ static int print_83xx_arb_event(int force)
        };
 
        int etype = (gd->arch.arbiter_event_attributes & AEATR_EVENT)
-                   >> AEATR_EVENT_SHIFT;
+                   >> AEATR_EVENT_SHIFT;
        int mstr_id = (gd->arch.arbiter_event_attributes & AEATR_MSTR_ID)
-                     >> AEATR_MSTR_ID_SHIFT;
+                     >> AEATR_MSTR_ID_SHIFT;
        int tbst = (gd->arch.arbiter_event_attributes & AEATR_TBST)
-                  >> AEATR_TBST_SHIFT;
+                  >> AEATR_TBST_SHIFT;
        int tsize = (gd->arch.arbiter_event_attributes & AEATR_TSIZE)
-                   >> AEATR_TSIZE_SHIFT;
+                   >> AEATR_TSIZE_SHIFT;
        int ttype = (gd->arch.arbiter_event_attributes & AEATR_TTYPE)
-                   >> AEATR_TTYPE_SHIFT;
+                   >> AEATR_TTYPE_SHIFT;
 
        if (!force && !gd->arch.arbiter_event_address)
                return 0;
index e073c904efc95537466e9985747216f18f333321..30606fbe5827b66859259c53037d2cfe13e73607 100644 (file)
@@ -67,7 +67,7 @@ static void pci_init_bus(int bus, struct pci_region *reg)
        pci_ctrl->pibar1 = 0;
        pci_ctrl->piebar1 = 0;
        pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
-                          PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size - 1));
+                          PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size - 1));
 
        i = hose->region_count++;
        hose->regions[i].bus_start = 0;
@@ -79,7 +79,7 @@ static void pci_init_bus(int bus, struct pci_region *reg)
        hose->last_busno = 0xff;
 
        pci_setup_indirect(hose, CONFIG_SYS_IMMR + 0x8300 + bus * 0x80,
-                                CONFIG_SYS_IMMR + 0x8304 + bus * 0x80);
+                                CONFIG_SYS_IMMR + 0x8304 + bus * 0x80);
 
        pci_register_hose(hose);
 
index 08781a1fb96d6859426d43d849eeec7b87ec8856..33dc72585cb22b5737051d9b1d5d590ca500352f 100644 (file)
@@ -143,14 +143,14 @@ void pci_405gp_init(struct pci_controller *hose)
        ptmla_str = getenv("ptm1la");
        ptmms_str = getenv("ptm1ms");
        if(NULL != ptmla_str && NULL != ptmms_str ) {
-               ptmla[0] = simple_strtoul (ptmla_str, NULL, 16);
+               ptmla[0] = simple_strtoul (ptmla_str, NULL, 16);
                ptmms[0] = simple_strtoul (ptmms_str, NULL, 16);
        }
 
        ptmla_str = getenv("ptm2la");
        ptmms_str = getenv("ptm2ms");
        if(NULL != ptmla_str && NULL != ptmms_str ) {
-               ptmla[1] = simple_strtoul (ptmla_str, NULL, 16);
+               ptmla[1] = simple_strtoul (ptmla_str, NULL, 16);
                ptmms[1] = simple_strtoul (ptmms_str, NULL, 16);
        }
 #endif
index 2d155a33fe5e9b27fc0bf46c9ed9e634e002e53c..5c45fca59f9ef336776d379c486b48c3f5b4f48c 100644 (file)
@@ -50,7 +50,7 @@ TFTP from server 192.168.1.1; our IP address is 192.168.20.71
 Filename '/tftpboot/ipam390/u-boot.ais'.
 Load address: 0xc0000000
 Loading: ##################################
-         1.5 MiB/s
+        1.5 MiB/s
 done
 Bytes transferred = 493716 (78894 hex)
 
index 7ae7ca21165808c66f5143fabf9afb82dfea6585..1f22c8524a500cdf66ce08f5bf7978e3b6eae521 100644 (file)
@@ -87,10 +87,10 @@ static inline void __sevenseg_set (unsigned int value)
 
 #if (SEVENSEG_ACTIVE == 0)
        sevenseg_portval = (sevenseg_portval &   SEVENDEG_MASK_DP)
-                        | ((~value)         & (~SEVENDEG_MASK_DP));
+                        | ((~value)         & (~SEVENDEG_MASK_DP));
 #else
        sevenseg_portval = (sevenseg_portval & SEVENDEG_MASK_DP)
-                        | (value);
+                        | (value);
 #endif
 
        piop->data = sevenseg_portval;
index 0d8e8e542bd9dd9e71de3c180de6c12ee271a37f..1f9a8895549e4ecfb142aa2fab97470c45ea5848 100644 (file)
@@ -6,39 +6,39 @@ if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk
       if sf probe || sf probe || \
         sf probe 1 27000000 || sf probe 1 27000000 ; then
           echo "probed SPI ROM" ;
-           if sf read 0x12400000 $offset $filesize ; then
-               if cmp.b 0x12000000 0x12400000 $filesize ; then
-                   echo "------- U-Boot versions match" ;
-               else
-                   echo "Need U-Boot upgrade" ;
-                   echo "Program in 5 seconds" ;
-                   for n in 5 4 3 2 1 ; do
-                        echo $n ;
-                        sleep 1 ;
-                   done
+          if sf read 0x12400000 $offset $filesize ; then
+              if cmp.b 0x12000000 0x12400000 $filesize ; then
+                  echo "------- U-Boot versions match" ;
+              else
+                  echo "Need U-Boot upgrade" ;
+                  echo "Program in 5 seconds" ;
+                  for n in 5 4 3 2 1 ; do
+                       echo $n ;
+                       sleep 1 ;
+                  done
                   echo "erasing" ;
-                   sf erase 0 0x50000 ;
+                  sf erase 0 0x50000 ;
                   # two steps to prevent bricking
                   echo "programming" ;
-                   sf write 0x12000000 $offset $filesize ;
+                  sf write 0x12000000 $offset $filesize ;
                   echo "verifying" ;
-                   if sf read 0x12400000 $offset $filesize ; then
-                       if cmp.b 0x12000000 0x12400000 $filesize ; then
-                           while echo "---- U-Boot upgraded. reset" ; do
+                  if sf read 0x12400000 $offset $filesize ; then
+                      if cmp.b 0x12000000 0x12400000 $filesize ; then
+                          while echo "---- U-Boot upgraded. reset" ; do
                                sleep 120
                           done
-                       else
-                           echo "Read verification error" ;
-                       fi
-                   else
-                        echo "Error re-reading EEPROM" ;
-                   fi
-               fi
-           else
-               echo "Error reading boot loader from EEPROM" ;
-           fi
+                      else
+                          echo "Read verification error" ;
+                      fi
+                  else
+                       echo "Error re-reading EEPROM" ;
+                  fi
+              fi
+          else
+              echo "Error reading boot loader from EEPROM" ;
+          fi
       else
-           echo "Error initializing EEPROM" ;
+          echo "Error initializing EEPROM" ;
       fi ;
 else
      echo "No U-Boot image found on SD card" ;
index cb6a9e41eeda98746ac27905ee314155b6af862e..2f13544612f2beae63592273942b7b63417aca1b 100644 (file)
@@ -3,8 +3,8 @@
 /include/ "coreboot.dtsi"
 
 / {
-        #address-cells = <1>;
-        #size-cells = <1>;
+       #address-cells = <1>;
+       #size-cells = <1>;
        model = "Google Alex";
        compatible = "google,alex", "intel,atom-pineview";
 
               silent_console = <0>;
        };
 
-        gpio: gpio {};
+       gpio: gpio {};
 
        serial {
                reg = <0x3f8 8>;
                clock-frequency = <115200>;
        };
 
-        chosen { };
-        memory { device_type = "memory"; reg = <0 0>; };
+       chosen { };
+       memory { device_type = "memory"; reg = <0 0>; };
 };
index c95ee8a108937cf2d3eb2d4e294cff1586817421..4a37dac4ea9adc470005da949b281f0e18923ef6 100644 (file)
@@ -3,8 +3,8 @@
 /include/ "coreboot.dtsi"
 
 / {
-        #address-cells = <1>;
-        #size-cells = <1>;
+       #address-cells = <1>;
+       #size-cells = <1>;
        model = "Google Link";
        compatible = "google,link", "intel,celeron-ivybridge";
 
               silent_console = <0>;
        };
 
-        gpio: gpio {};
+       gpio: gpio {};
 
        serial {
                reg = <0x3f8 8>;
                clock-frequency = <115200>;
        };
 
-        chosen { };
-        memory { device_type = "memory"; reg = <0 0>; };
+       chosen { };
+       memory { device_type = "memory"; reg = <0 0>; };
 
        spi {
                #address-cells = <1>;
index abecb40bfa546d44aec3d269aa5dddda19e0ae75..61e778ea5f5d4379fb5b84b2de444f8243145725 100644 (file)
@@ -1,11 +1,11 @@
 #
 # GDB Init script for the Coldfire 5272 processor.
 #
-# The main purpose of this script is to configure the
+# The main purpose of this script is to configure the 
 # DRAM controller so code can be loaded.
 #
 # This file was changed to suite the senTec COBRA5272 board.
-#
+# 
 
 define addresses
 
index 207380f09939db895d086679e00d4be060f44409..d4ae4d0a3ccfdbe023f922f9abfd426e090cd116 100644 (file)
@@ -487,7 +487,7 @@ flash_erase(flash_info_t *info, int s_first, int s_last)
 
        if (haderr > 0) {
                printf (" failed\n");
-               rcode = 1;
+               rcode = 1;
        }
        else
                printf (" done\n");
index c9e3c91a7a6c1e5c8f0029ba51fc023d6e521997..f2f78ad5c30f3f01d2917bf100f725fb931b26b5 100644 (file)
@@ -47,7 +47,7 @@ else
        echo no kernel to boot from $flash_krl, need tftp
 fi
 
-# Have a rootfs in flash?
+# Have a rootfs in flash? 
 echo test for SQUASHfs at $flash_rfs
 
 if imi $flash_rfs
@@ -69,7 +69,7 @@ fi
 
 # TFTP down a kernel
 if printenv bootfile
-then
+then 
        tftp $tftp_addr $bootfile
        setenv kernel $tftp_addr
        echo I will boot the TFTP kernel
@@ -90,7 +90,7 @@ if printenv rootpath
 then
        echo rootpath is $rootpath
        if printenv initrd
-       then
+       then 
                echo initrd is also specified, so use $initrd
                tftp $tftp2_addr $initrd
                setenv bootargs root=/dev/ram0 rw cwsroot=$serverip:$rootpath $bootargs
index 96e4b9972d50861abae1bdbf27aa9191c08acb73..5b14bf926014bff8458e13644a3aba5a4b3790d1 100644 (file)
@@ -9,7 +9,7 @@
  * Neutralize little endians.
  */
 #define SWAP_LONG(data) ((unsigned long)                                  \
-                        (((unsigned long)(data) >> 24)                 | \
+                        (((unsigned long)(data) >> 24)                 | \
                          ((unsigned long)(data)  << 24)                | \
                          (((unsigned long)(data) >> 8) & 0x0000ff00 )  | \
                           (((unsigned long)(data) << 8) & 0x00ff0000 )))
index 5f306855acbb1e4e7fbd2f340b3748a9b7dd48e5..f555c08427a66eac0ce27f55014056445e3b2100 100644 (file)
@@ -43,7 +43,7 @@ int ide_preinit (void)
        if (devbusfn != -1) {
                cpci_hd_type = 1;
        } else {
-               devbusfn = pci_find_device (0x1095, 0x3114, 0);
+               devbusfn = pci_find_device (0x1095, 0x3114, 0);
                if (devbusfn != -1) {
                        cpci_hd_type = 2;
                }
index c9b3ac2a4f36ea03061891e051b09364fbe0da94..59f170a0df7108e79945bec78db2cf0072c5a8d7 100644 (file)
@@ -746,7 +746,7 @@ static int gt_read_config_dword (struct pci_controller *hose,
        int bus = PCI_BUS (dev);
 
        if ((bus == local_buses[0]) || (bus == local_buses[1])) {
-               *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr,
+               *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr,
                                           offset | (PCI_FUNC(dev) << 8),
                                           PCI_DEV (dev));
        } else {
index 9d22aa2bd7f05496b94bdcfebe473d6af5df12ca..26579588dd951bc4fec46e39f7f3d1c8a569a910 100644 (file)
@@ -323,7 +323,7 @@ int flash_erase (flash_info_t *flash, int s_first, int s_last)
 
        if (prot)
                printf ("- Warning: %d protected sectors will not be erased!\n",
-                                                               prot);
+                                                               prot);
        else
                printf ("\n");
 
@@ -365,7 +365,7 @@ static const struct jedec_flash_info jedec_table[] = {
                DevSize: SIZE_1MiB,
                NumEraseRegions: 4,
                regions: {ERASEINFO(0x10000,15),
-                         ERASEINFO(0x08000,1),
+                         ERASEINFO(0x08000,1),
                          ERASEINFO(0x02000,2),
                          ERASEINFO(0x04000,1)
                }
@@ -376,7 +376,7 @@ static const struct jedec_flash_info jedec_table[] = {
                DevSize: SIZE_2MiB,
                NumEraseRegions: 4,
                regions: {ERASEINFO(0x10000,31),
-                         ERASEINFO(0x08000,1),
+                         ERASEINFO(0x08000,1),
                          ERASEINFO(0x02000,2),
                          ERASEINFO(0x04000,1)
                }
@@ -387,7 +387,7 @@ static const struct jedec_flash_info jedec_table[] = {
                DevSize: SIZE_2MiB,
                NumEraseRegions: 4,
                regions: {ERASEINFO(0x04000,1),
-                         ERASEINFO(0x02000,2),
+                         ERASEINFO(0x02000,2),
                          ERASEINFO(0x08000,1),
                          ERASEINFO(0x10000,31)
                }
@@ -398,7 +398,7 @@ static const struct jedec_flash_info jedec_table[] = {
                DevSize: SIZE_4MiB,
                NumEraseRegions: 2,
                regions: {ERASEINFO(0x10000,63),
-                         ERASEINFO(0x02000,8)
+                         ERASEINFO(0x02000,8)
                }
 
        }, {
@@ -408,7 +408,7 @@ static const struct jedec_flash_info jedec_table[] = {
                DevSize: SIZE_4MiB,
                NumEraseRegions: 2,
                regions: {ERASEINFO(0x02000,8),
-                         ERASEINFO(0x10000,63)
+                         ERASEINFO(0x10000,63)
                }
        }
 };
index 88c43ff688cfb84c207995dfa1ebc3dafb1fb23a..f3b0074c5df0a948f0603d1b3b701f5a6dd81668 100644 (file)
@@ -60,7 +60,7 @@ flash_init (void)
 #define CONFIG_SYS_BOOT_FLASH_WIDTH    1
 #endif
        size_b0 = flash_get_size(CONFIG_SYS_BOOT_FLASH_WIDTH, (vu_long *)base,
-                                &flash_info[0]);
+                                &flash_info[0]);
 
 #ifndef CONFIG_P3G4
        printf("[");
@@ -97,17 +97,17 @@ flash_init (void)
 #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
        /* monitor protection ON by default */
        flash_protect(FLAG_PROTECT_SET,
-                     CONFIG_SYS_MONITOR_BASE,
-                     CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
-                     flash_get_info(CONFIG_SYS_MONITOR_BASE));
+                     CONFIG_SYS_MONITOR_BASE,
+                     CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
+                     flash_get_info(CONFIG_SYS_MONITOR_BASE));
 #endif
 
 #ifdef  CONFIG_ENV_IS_IN_FLASH
        /* ENV protection ON by default */
        flash_protect(FLAG_PROTECT_SET,
-                     CONFIG_ENV_ADDR,
-                     CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
-                     flash_get_info(CONFIG_ENV_ADDR));
+                     CONFIG_ENV_ADDR,
+                     CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
+                     flash_get_info(CONFIG_ENV_ADDR));
 #endif
 
        flash_size = size_b0 + size_b1;
index 1a2ad20598dd8a23b5afad3a8e1de33a4a4d248a..c9da57c20d017bd50f1e362fc84064edae372f12 100644 (file)
@@ -785,7 +785,7 @@ galmpsc_shutdown(int mpsc)
 
        GT_REG_WRITE(GALSDMA_0_COM_REG + CHANNEL * GALSDMA_REG_DIFF, 0);
        GT_REG_WRITE(GALSDMA_0_COM_REG + CHANNEL * GALSDMA_REG_DIFF,
-                    SDMA_TX_ABORT | SDMA_RX_ABORT);
+                    SDMA_TX_ABORT | SDMA_RX_ABORT);
 
        /* shut down the MPSC */
        GT_REG_WRITE(GALMPSC_MCONF_LOW, 0);
@@ -797,7 +797,7 @@ galmpsc_shutdown(int mpsc)
        /* shut down the sdma engines. */
        /* reset config to default */
        GT_REG_WRITE(GALSDMA_0_CONF_REG + CHANNEL * GALSDMA_REG_DIFF,
-                    0x000000fc);
+                    0x000000fc);
 
        udelay(100);
 
index 3fe318f765fea10f17db8aa20ae453d91634d58d..89dd9efe7849c9f52d9e2d22f02d7954a73764b5 100644 (file)
@@ -434,7 +434,7 @@ static int _initsdram(uint base, uint noMbytes)
        */
 
        memctl->memc_mcr = 0x80808111;   /* run umpb cs4 1 count 1, addr 0x11 ??? (50MHz) */
-                                        /* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100MHz) */
+                                        /* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100MHz) */
        udelay(200);
 
        /* Run 8 refresh cycles */
@@ -567,7 +567,7 @@ static int initsdram(uint base, uint *noMbytes)
 
        if(!_initsdram(base, m))
        {
-               *noMbytes += m;
+               *noMbytes += m;
                return 0;
        }
        else
index f71aca4092000d2d6dc2463f6ab5961bfef9e7fe..00798a1c190da6ac3350b436e44df26f1468f3fb 100644 (file)
@@ -68,7 +68,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
                      0, 3, BOOKE_PAGESZ_256M, 1),
 
        SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000,
-                      CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000,
+                     CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 4, BOOKE_PAGESZ_256M, 1),
 
index 4a3dbfe5d4e15300824fa479cfc5184b4f9e5e61..f8377c9aa41edf7be1fdfdbf905dd8ada24d2c28 100644 (file)
@@ -23,14 +23,14 @@ Overview
       ECC), up to 1333 MHz data rate
     - Dedicated security engine featuring trusted boot
     - Two DMA controllers
-         - OCNDMA with four bidirectional channels
-         - SysDMA with sixteen bidirectional channels
+        - OCNDMA with four bidirectional channels
+        - SysDMA with sixteen bidirectional channels
     - Interfaces
-        - Four-lane SerDes PHY
+       - Four-lane SerDes PHY
            - PCI Express controller complies with the PEX Specification-Rev 2.0
-        - Two Common Public Radio Interface (CPRI) controller lanes
+       - Two Common Public Radio Interface (CPRI) controller lanes
            - High-speed USB 2.0 host and device controller with ULPI interface
-        - Enhanced secure digital (SD/MMC) host controller (eSDHC)
+       - Enhanced secure digital (SD/MMC) host controller (eSDHC)
            - Antenna interface controller (AIC), supporting four industry
                standard JESD207/four custom ADI RF interfaces
        - ADI lanes support both full duplex FDD support & half duplex TDD
index 591a4c61d06902ef28285d03b7f5a5636934b812..69e98a50074b581761893eae0c1a0ffcb5de77ba 100644 (file)
@@ -129,12 +129,12 @@ void board_init_f(ulong bootflag)
 {
        board_early_init_f();
        NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500),
-                    CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+                    CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
        puts("NAND boot... ");
        init_timebase();
        initdram(0);
        relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, (gd_t *)gd,
-                     CONFIG_SYS_NAND_U_BOOT_RELOC);
+                     CONFIG_SYS_NAND_U_BOOT_RELOC);
 }
 
 void board_init_r(gd_t *gd, ulong dest_addr)
index 39a86dffe1cde09c2d76906eecffc230d4ee8ce7..ac96163aa47e2577be512f4a18361044684bcd4f 100644 (file)
@@ -427,7 +427,7 @@ void ft_board_setup(void *blob, bd_t *bd)
                        if (prop) {
                                path = fdt_path_offset(blob, prop);
                                prop = fdt_getprop(blob, path,
-                                                  "phy-connection-type", 0);
+                                                  "phy-connection-type", 0);
                                if (prop && (strcmp(prop, "rgmii-id") == 0))
                                        fdt_fixup_phy_connection(blob, path,
                                                PHY_INTERFACE_MODE_RGMII_RXID);
@@ -439,7 +439,7 @@ void ft_board_setup(void *blob, bd_t *bd)
                        if (prop) {
                                path = fdt_path_offset(blob, prop);
                                prop = fdt_getprop(blob, path,
-                                                  "phy-connection-type", 0);
+                                                  "phy-connection-type", 0);
                                if (prop && (strcmp(prop, "rgmii-id") == 0))
                                        fdt_fixup_phy_connection(blob, path,
                                                PHY_INTERFACE_MODE_RGMII_RXID);
index d33563b8d849fcdfd835155bfd388224b42b7850..c2aad6eb05f6860d81887cc9e559ee380cd77932 100644 (file)
@@ -270,9 +270,9 @@ int misc_init_r (void)
        for (i = 0; i < 64; i++) {
                c = *dummy;
                printf( "UPMA[%02d]: 0x%08lx,0x%08lx: 0x%08lx\n",i,
-                       memctl->memc_mamr,
-                       memctl->memc_mar,
-                       memctl->memc_mdr );
+                       memctl->memc_mamr,
+                       memctl->memc_mar,
+                       memctl->memc_mdr );
        }
        memctl->memc_mamr = 0x00044440;
 #endif
index 8433d5d2cfbd0c7608aaabb303f640c370605eed..ca1ed3d62da08753be2d984c929833572aa1ce70 100644 (file)
@@ -182,7 +182,7 @@ flash_get_offsets (ulong base, flash_info_t *info)
 
                default:
                        printf ("Don't know sector offsets for FLASH"
-                               " type 0x%lx\n", info->flash_id);
+                               " type 0x%lx\n", info->flash_id);
            return;
        }
 }
index 911fb63fcd995be6884fb7f5e45a3ab4aa33998f..217b8afa34734de04481702c1d102ed0be01187a 100644 (file)
@@ -58,9 +58,9 @@ phys_size_t initdram(int board_type)
                for (rows = 0xB; rows <= 0xD; rows++)
                {
                        *INCA_IP_SDRAM_MC_CFGPB0 = (0x14 << 8) |
-                                                  (rows << 4) | cols;
+                                                  (rows << 4) | cols;
                        size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
-                                                            max_sdram_size());
+                                                            max_sdram_size());
 
                        if (size > max_size)
                        {
index 84add28d40f3f1f02a5ff1cf669688446c204949..61474aaf8b5afcbff36e890e0b1d16607814f2a7 100644 (file)
@@ -19,7 +19,7 @@ OBJS    := $(addprefix $(obj),$(COBJS))
 SOBJS   := $(addprefix $(obj),$(SOBJS))
 
 $(LIB): $(obj).depend $(OBJS)
-               $(call cmd_link_o_target, $(OBJS))
+               $(call cmd_link_o_target, $(OBJS))
 
 #########################################################################
 
index 0e53e8df210311d33d08af623d797f70d71140e8..ef768feb72ae262258b20231cb32fd3d905d2e2b 100644 (file)
@@ -19,7 +19,7 @@ OBJS    := $(addprefix $(obj),$(COBJS))
 SOBJS   := $(addprefix $(obj),$(SOBJS))
 
 $(LIB): $(obj).depend $(OBJS)
-               $(call cmd_link_o_target, $(OBJS))
+               $(call cmd_link_o_target, $(OBJS))
        @mkimage -T script -C none -n mvSMR_Script -d bootscript $(obj)bootscript.img
 
 #########################################################################
index 9926093a407b34d4255faa1f77600b2c250915b7..2bd86429326718b56218c3f549c7c00a726c7aae 100644 (file)
@@ -20,8 +20,8 @@ the simulator.
    not found too, it reverts to the built-in default configuration.
 
    NOTE: Users should not rely on the built-in configuration, since the
-         default configuration may differ between version.
-         Rather create a configuration file that sets all critical values.
+        default configuration may differ between version.
+        Rather create a configuration file that sets all critical values.
 
    This file may contain (standard C) comments only - no // support.
 
@@ -306,7 +306,7 @@ end
   debug = 0-9
       0  : no debug messages
       1-9: debug message level.
-           higher numbers produce more messages
+          higher numbers produce more messages
 
   profile = 0/1
       '0': don't generate profiling file 'sim.profile'
@@ -375,11 +375,11 @@ end
     Core Verification.
 
     enabled = 0/1
-        '0': disbable VAPI server
-        '1': enable/start VAPI server
+       '0': disbable VAPI server
+       '1': enable/start VAPI server
 
     server_port = <value>
-        TCP/IP port to start VAPI server on
+       TCP/IP port to start VAPI server on
 
     log_enabled = 0/1
        '0': disable VAPI requests logging
@@ -565,56 +565,56 @@ end
    This section configures the UARTs
 
      enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+       Enable/disable the peripheral.  By default if it is enabled.
 
      baseaddr = <hex_value>
-        address of first UART register for this device
+       address of first UART register for this device
 
 
      channel = <channeltype>:<args>
 
-        The channel parameter indicates the source of received UART characters
-        and the sink for transmitted UART characters.
+       The channel parameter indicates the source of received UART characters
+       and the sink for transmitted UART characters.
 
-        The <channeltype> can be either "file", "xterm", "tcp", "fd", or "tty"
-        (without quotes).
+       The <channeltype> can be either "file", "xterm", "tcp", "fd", or "tty"
+       (without quotes).
 
-          A) To send/receive characters from a pair of files, use a file
-             channel:
+         A) To send/receive characters from a pair of files, use a file
+            channel:
 
-               channel=file:<rxfile>,<txfile>
+              channel=file:<rxfile>,<txfile>
 
          B) To create an interactive terminal window, use an xterm channel:
 
-               channel=xterm:[<xterm_arg>]*
+              channel=xterm:[<xterm_arg>]*
 
          C) To create a bidirectional tcp socket which one could, for example,
-             access via telnet, use a tcp channel:
+            access via telnet, use a tcp channel:
 
-               channel=tcp:<port number>
+              channel=tcp:<port number>
 
          D) To cause the UART to read/write from existing numeric file
-             descriptors, use an fd channel:
+            descriptors, use an fd channel:
 
-               channel=fd:<rx file descriptor num>,<tx file descriptor num>
+              channel=fd:<rx file descriptor num>,<tx file descriptor num>
 
-          E) To connect the UART to a physical serial port, create a tty
-             channel:
+         E) To connect the UART to a physical serial port, create a tty
+            channel:
 
               channel=tty:device=/dev/ttyS0,baud=9600
 
      irq = <value>
-        irq number for this device
+       irq number for this device
 
      16550 = 0/1
-        '0': this device is a UART16450
-        '1': this device is a UART16550
+       '0': this device is a UART16450
+       '1': this device is a UART16550
 
      jitter = <value>
-        in msecs... time to block, -1 to disable it
+       in msecs... time to block, -1 to disable it
 
      vapi_id = <hex_value>
-        VAPI id of this instance
+       VAPI id of this instance
 */
 
 section uart
@@ -634,16 +634,16 @@ end
    This section configures the DMAs
 
      enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+       Enable/disable the peripheral.  By default if it is enabled.
 
      baseaddr = <hex_value>
-        address of first DMA register for this device
+       address of first DMA register for this device
 
      irq = <value>
-        irq number for this device
+       irq number for this device
 
      vapi_id = <hex_value>
-        VAPI id of this instance
+       VAPI id of this instance
 */
 
 section dma
@@ -658,37 +658,37 @@ end
    This section configures the ETHERNETs
 
      enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+       Enable/disable the peripheral.  By default if it is enabled.
 
      baseaddr = <hex_value>
-        address of first ethernet register for this device
+       address of first ethernet register for this device
 
      dma = <value>
-        which controller is this ethernet "connected" to
+       which controller is this ethernet "connected" to
 
      irq = <value>
-        ethernet mac IRQ level
+       ethernet mac IRQ level
 
      rtx_type = <value>
-        use 0 - file interface, 1 - socket interface
+       use 0 - file interface, 1 - socket interface
 
      rx_channel = <value>
-        DMA channel used for RX
+       DMA channel used for RX
 
      tx_channel = <value>
-        DMA channel used for TX
+       DMA channel used for TX
 
      rxfile = "<filename>"
-        filename, where to read data from
+       filename, where to read data from
 
      txfile = "<filename>"
-        filename, where to write data to
+       filename, where to write data to
 
      sockif = "<ifacename>"
-        interface name of ethernet socket
+       interface name of ethernet socket
 
      vapi_id = <hex_value>
-        VAPI id of this instance
+       VAPI id of this instance
 */
 
 section ethernet
@@ -711,16 +711,16 @@ end
    This section configures the GPIOs
 
      enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+       Enable/disable the peripheral.  By default if it is enabled.
 
      baseaddr = <hex_value>
-        address of first GPIO register for this device
+       address of first GPIO register for this device
 
      irq = <value>
-        irq number for this device
+       irq number for this device
 
      base_vapi_id = <hex_value>
-        first VAPI id of this instance
+       first VAPI id of this instance
        GPIO uses 8 consecutive VAPI IDs
 */
 
@@ -736,19 +736,19 @@ end
     This section configures the VGA/LCD controller
 
       enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+       Enable/disable the peripheral.  By default if it is enabled.
 
       baseaddr = <hex_value>
-        address of first VGA register
+       address of first VGA register
 
       irq = <value>
-        irq number for this device
+       irq number for this device
 
       refresh_rate = <value>
-        number of cycles between screen dumps
+       number of cycles between screen dumps
 
       filename = "<filename>"
-        template name for generated names (e.g. "primary" produces "primary0023.bmp")
+       template name for generated names (e.g. "primary" produces "primary0023.bmp")
 */
 
 section vga
@@ -825,39 +825,39 @@ end
     This section configures the ATA/ATAPI host controller
 
       baseaddr = <hex_value>
-        address of first ATA register
+       address of first ATA register
 
       enabled = <0|1>
-        Enable/disable the peripheral.  By default if it is enabled.
+       Enable/disable the peripheral.  By default if it is enabled.
 
       irq = <value>
-        irq number for this device
+       irq number for this device
 
       debug = <value>
-        debug level for ata models.
+       debug level for ata models.
        0: no debug messages
        1: verbose messages
        3: normal messages (more messages than verbose)
-        5: debug messages (normal debug messages)
+       5: debug messages (normal debug messages)
        7: flow control messages (debug statemachine flows)
        9: low priority message (display everything the code does)
 
       dev_type0/1 = <value>
-        ata device 0 type
-        0: NO_CONNeCT: none (not connected)
+       ata device 0 type
+       0: NO_CONNeCT: none (not connected)
        1: FILE      : simulated harddisk
        2: LOCAL     : local system harddisk
 
       dev_file0/1 = "<filename>"
-        filename for simulated ATA device
+       filename for simulated ATA device
        valid only if dev_type0 == 1
 
       dev_size0/1 = <value>
-        size of simulated hard-disk (in MBytes)
+       size of simulated hard-disk (in MBytes)
        valid only if dev_type0 == 1
 
       dev_packet0/1 = <value>
-        0: simulated ATA device does NOT implement PACKET command feature set
+       0: simulated ATA device does NOT implement PACKET command feature set
        1: simulated ATA device does implement PACKET command feature set
 
    FIXME: irq number
index 03d36ee92d7395005852e07e539924c93e74fd72..ea3c42eed4b6144bd2a9b1fceb9b45b0c3e43fad 100644 (file)
@@ -407,7 +407,7 @@ static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout
                        printf("Command Sequence Error.\n");
                } else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){
                        printf("Block Erase Error.\n");
-                       retcode = ERR_NOT_ERASED;
+                       retcode = ERR_NOT_ERASED;
                } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
                        printf("Locking Error\n");
                }
index 786edc663267b3f11c6ade78122420d5f2949c2f..4a721d1b0465998bd90d841cef95816d675f1180 100644 (file)
@@ -21,7 +21,7 @@ class gpio:
                self.clr = clr
                self.alt = alt
                self.desc = desc
-
+               
 
 # the following is a dictionary of all GPIOs in the system
 # the key is the GPIO number
@@ -280,8 +280,8 @@ for reg in registers:
 
 # print define to past right into U-Boot source code
 
-print
-print
+print 
+print 
 
 for reg in registers:
        print '#define %s       0x%x' % (uboot_reg_names[reg], pxa_regs[reg])
index f276e5e5f550b7b7265d46e91a5ec19a3baa14fd..5881111c70e7c43bfcf6fdc0eb568757fe7b6742 100644 (file)
@@ -78,7 +78,7 @@ const uint static_table[] =
        0x0FFFFC04, 0x0FF3FC04, 0x0FF3CC04, 0x0FF3CC04,
        0x0FF3EC04, 0x0FF3CC00, 0x0FF7FC04, 0x3FFFFC04,
        0xFFFFFC04, 0xFFFFFC05, /* last */
-                               _NOT_USED_, _NOT_USED_,
+                               _NOT_USED_, _NOT_USED_,
        _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
        _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
        _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
index 9b7e57e43d5aa36d4a47f0ad96b74b2fde18c50c..12cd67e49cca1a60b89d1e70ad8d525b03c8656f 100644 (file)
@@ -71,9 +71,9 @@
                codec-enable-gpio = <&gpio 0xb7 0>;
        };
 
-        sound@12d60000 {
-                status = "disabled";
-        };
+       sound@12d60000 {
+               status = "disabled";
+       };
 
        i2c@12cd0000 {
                soundcodec@22 {
index a508595abf2f72adffe04af4a148dfa66a7986b2..5db48506c64c727074366b95251c79ba4559e665 100644 (file)
@@ -139,6 +139,6 @@ phys_size_t initdram (int board_type)
 #if defined(CONFIG_CMD_DOC)
 void doc_init (void)
 {
-               doc_probe (CONFIG_SYS_DOC_BASE);
+               doc_probe (CONFIG_SYS_DOC_BASE);
 }
 #endif
index 6a182e83fc65dd2a95c2c6522e3af90c7dcf6813..aa2ee642d411948cad91511075a52e4b1bfcf065 100644 (file)
@@ -196,7 +196,7 @@ Active  arm         arm926ejs      mb86r0x     syteco          jadecpu
 Active  arm         arm926ejs      mx25        freescale       mx25pdk             mx25pdk                              mx25pdk:IMX_CONFIG=board/freescale/mx25pdk/imximage.cfg                                                                           Fabio Estevam <fabio.estevam@freescale.com>
 Active  arm         arm926ejs      mx25        karo            tx25                tx25                                 -                                                                                                                                 John Rigby <jcrigby@gmail.com>
 Active  arm         arm926ejs      mx25        syteco          zmx25               zmx25                                -                                                                                                                                 Matthias Weisser <weisserm@arcor.de>
-Active  arm         arm926ejs      mx27        armadeus        apf27               apf27                                -                                                                                                                                 Philippe Reynes <tremyfr@yahoo.fr>:Eric Jarrige <eric.jarrige@armadeus.org>
+Active  arm         arm926ejs      mx27        armadeus        apf27               apf27                                -                                                                                                                                 Philippe Reynes <tremyfr@yahoo.fr>:Eric Jarrige <eric.jarrige@armadeus.org> 
 Active  arm         arm926ejs      mx27        logicpd         imx27lite           imx27lite                            -                                                                                                                                 Wolfgang Denk <wd@denx.de>
 Active  arm         arm926ejs      mx27        logicpd         imx27lite           magnesium                            -                                                                                                                                 Heiko Schocher <hs@denx.de>
 Active  arm         arm926ejs      mxs         bluegiga        apx4devkit          apx4devkit                           apx4devkit                                                                                                                        Lauri Hintsala <lauri.hintsala@bluegiga.com>
index c093fefd4c3a22bf49961d00e38e53bbe6d3208e..cc904c253560f4e0e4743e2eeba162c63d5021ad 100644 (file)
@@ -121,9 +121,9 @@ static int do_bmp_display(cmd_tbl_t * cmdtp, int flag, int argc, char * const ar
                break;
        case 4:
                addr = simple_strtoul(argv[1], NULL, 16);
-               x = simple_strtoul(argv[2], NULL, 10);
-               y = simple_strtoul(argv[3], NULL, 10);
-               break;
+               x = simple_strtoul(argv[2], NULL, 10);
+               y = simple_strtoul(argv[3], NULL, 10);
+               break;
        default:
                return CMD_RET_USAGE;
        }
index ae37fee46d984370a2ae994432ccaf52333acf33..6f475f0cca812ea8b69d5b3842819f1d9fa04ff3 100644 (file)
@@ -365,7 +365,7 @@ static void process_boot_delay(void)
 #ifdef CONFIG_BOOTCOUNT_LIMIT
        if (bootlimit && (bootcount > bootlimit)) {
                printf ("Warning: Bootlimit (%u) exceeded. Using altbootcmd.\n",
-                       (unsigned)bootlimit);
+                       (unsigned)bootlimit);
                s = getenv ("altbootcmd");
        }
        else
index 48913f6659f101e9009d54b5886bab44f0fafccd..91a8f2406b56d505413f2b3be7be17560ad73b35 100644 (file)
--- a/config.mk
+++ b/config.mk
@@ -320,7 +320,7 @@ endif
 
 # Linus' kernel sanity checking tool
 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
-                  -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
+                 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
 
 # Location of a usable BFD library, where we define "usable" as
 # "built for ${HOST}, supports ${TARGET}".  Sensible values are
index 521e8bc0e9b7144e0e378ab2808ccaccbb3d8ce3..29b79d7cd11e5c83b24601add7c70c10365a7a4d 100644 (file)
@@ -134,7 +134,7 @@ build_main_index = rm -rf $(main_idx); \
 quiet_cmd_db2html = HTML    $@
       cmd_db2html = xmlto html $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \
                echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \
-        $(patsubst %.html,%,$(notdir $@))</a><p>' > $@
+       $(patsubst %.html,%,$(notdir $@))</a><p>' > $@
 
 %.html:        %.xml
        @(which xmlto > /dev/null 2>&1) || \
@@ -143,7 +143,7 @@ quiet_cmd_db2html = HTML    $@
        @rm -rf $@ $(patsubst %.html,%,$@)
        $(call cmd_db2html)
        @if [ ! -z "$(PNG-$(basename $(notdir $@)))" ]; then \
-            cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi
+           cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi
 
 quiet_cmd_db2man = MAN     $@
       cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; gzip -f $(obj)/man/*.9; fi
index b7d0ad3930d042c89b23e49ba1a933824f2632ce..9a2de5088b9a1ce14eae3902f6cd292a83cc4fcc 100644 (file)
@@ -28,30 +28,30 @@ Steps to test:
 
 1. After applying the patch, ext4 specific commands can be seen
    in the boot loader prompt using
-        UBOOT #help
+       UBOOT #help
 
-        ext4load- load binary file from a Ext4 file system
-        ext4ls  - list files in a directory (default /)
-        ext4write- create a file in ext4 formatted partition
+       ext4load- load binary file from a Ext4 file system
+       ext4ls  - list files in a directory (default /)
+       ext4write- create a file in ext4 formatted partition
 
 2. To list the files in ext4 formatted partition, execute
-        ext4ls <interface> <dev[:part]> [directory]
-        For example:
-        UBOOT #ext4ls mmc 0:5 /usr/lib
+       ext4ls <interface> <dev[:part]> [directory]
+       For example:
+       UBOOT #ext4ls mmc 0:5 /usr/lib
 
 3. To read and load a file from an ext4 formatted partition to RAM, execute
-        ext4load <interface> <dev[:part]> [addr] [filename] [bytes]
-        For example:
-        UBOOT #ext4load mmc 2:2 0x30007fc0 uImage
+       ext4load <interface> <dev[:part]> [addr] [filename] [bytes]
+       For example:
+       UBOOT #ext4load mmc 2:2 0x30007fc0 uImage
 
 4. To write a file to a ext4 formatted partition.
-        a) First load a file to RAM at a particular address for example 0x30007fc0.
-        Now execute ext4write command
-        ext4write <interface> <dev[:part]> [filename] [Address] [sizebytes]
-        For example:
-        UBOOT #ext4write mmc 2:2 /boot/uImage 0x30007fc0 6183120
-        (here 6183120 is the size of the file to be written)
-        Note: Absolute path is required for the file to be written
+       a) First load a file to RAM at a particular address for example 0x30007fc0.
+       Now execute ext4write command
+       ext4write <interface> <dev[:part]> [filename] [Address] [sizebytes]
+       For example:
+       UBOOT #ext4write mmc 2:2 /boot/uImage 0x30007fc0 6183120
+       (here 6183120 is the size of the file to be written)
+       Note: Absolute path is required for the file to be written
 
 References :
        -- ext4 implementation in Linux Kernel
index e91c387b51ed6df1f21c8491258ff0dcb324557d..8ed708c35695f8124a838fe4ba62c515c020ff34 100644 (file)
@@ -40,9 +40,9 @@ Board specific configuration file specifications:
 ------------------------------------------------
 1. This file must present in the $(BOARDDIR).  The default name is
        kwbimage.cfg.  The name can be set as part of the full path
-        to the file using CONFIG_SYS_KWD_CONFIG (probably in
-        include/configs/<yourboard>.h).   The path should look like:
-        $(SRCTREE)/$(CONFIG_BOARDDIR)/<yourkwbimagename>.cfg
+       to the file using CONFIG_SYS_KWD_CONFIG (probably in
+       include/configs/<yourboard>.h).   The path should look like:
+       $(SRCTREE)/$(CONFIG_BOARDDIR)/<yourkwbimagename>.cfg
 2. This file can have empty lines and lines starting with "#" as first
        character to put comments
 3. This file can have configuration command lines as mentioned below,
index 97f8b7d743d63895d8eddd54764e986773c33cfc..43e64a2797ded0b94e6b3865b01752172ac1cef1 100644 (file)
@@ -20,7 +20,7 @@ Data Size:    327680 Bytes = 320.00 kB = 0.31 MB
 Load Address: 177ff420
 Entry Point:  17800000
 HAB Blocks:   177ff400 00000000 0004dc00
-              ^^^^^^^^ ^^^^^^^^ ^^^^^^^^
+             ^^^^^^^^ ^^^^^^^^ ^^^^^^^^
                |       |          |
                |       |          -------- (1)
                |       |
index 88a2caf3e62ab8bb7600ee6f1176d9bcec230a8a..0d31cba1fb5a3ed7b6d0a12000bb2bc9e0d9e4ab 100644 (file)
@@ -10,7 +10,7 @@ The mxsimage tool is targeted to be a simple replacement for the elftosb2 .
 To generate an image, write an image configuration file and run:
 
  mkimage -A arm -O u-boot -T mxsimage -n <path to configuration file> \
-         <output bootstream file>
+        <output bootstream file>
 
 The output bootstream file is usually using the .sb file extension. Note
 that the example configuration files for producing bootable BootStream with
@@ -54,33 +54,33 @@ These semantics and rules will be outlined now.
 
       LOAD     u32_address string_filename
       - Instructs the BootROM to load file pointed by "string_filename" onto
-        address "u32_address".
+       address "u32_address".
 
       LOAD IVT u32_address u32_IVT_entry_point
       - Crafts and loads IVT onto address "u32_address" with the entry point
-        of u32_IVT_entry_point.
+       of u32_IVT_entry_point.
       - i.MX28-specific instruction!
 
       LOAD DCD u32_address u32_DCD_block_ID
       - Loads the DCD block with ID "u32_DCD_block_ID" onto address
-        "u32_address" and executes the contents of this DCD block
+       "u32_address" and executes the contents of this DCD block
       - i.MX28-specific instruction!
 
       FILL u32_address u32_pattern u32_length
       - Starts to write memory from addres "u32_address" with a pattern
-        specified by "u32_pattern". Writes exactly "u32_length" bytes of the
+       specified by "u32_pattern". Writes exactly "u32_length" bytes of the
        pattern.
 
       JUMP [HAB] u32_address [u32_r0_arg]
       - Jumps onto memory address specified by "u32_address" by setting this
-        address in PT. The BootROM will pass the "u32_r0_arg" value in ARM
+       address in PT. The BootROM will pass the "u32_r0_arg" value in ARM
        register "r0" to the executed code if this option is specified.
        Otherwise, ARM register "r0" will default to value 0x00000000. The
        optional "HAB" flag is i.MX28-specific flag turning on the HAB boot.
 
       CALL [HAB] u32_address [u32_r0_arg]
       - See JUMP instruction above, as the operation is exactly the same with
-        one difference. The CALL instruction does allow returning into the
+       one difference. The CALL instruction does allow returning into the
        BootROM from the executed code. U-Boot makes use of this in it's SPL
        code.
 
@@ -88,10 +88,10 @@ These semantics and rules will be outlined now.
       - Restart the CPU and start booting from device specified by the
        "string_mode" argument. The "string_mode" differs for each CPU
        and can be:
-         i.MX23, string_mode = USB/I2C/SPI1_FLASH/SPI2_FLASH/NAND_BCH
-                               JTAG/SPI3_EEPROM/SD_SSP0/SD_SSP1
-         i.MX28, string_mode = USB/I2C/SPI2_FLASH/SPI3_FLASH/NAND_BCH
-                               JTAG/SPI2_EEPROM/SD_SSP0/SD_SSP1
+        i.MX23, string_mode = USB/I2C/SPI1_FLASH/SPI2_FLASH/NAND_BCH
+                              JTAG/SPI3_EEPROM/SD_SSP0/SD_SSP1
+        i.MX28, string_mode = USB/I2C/SPI2_FLASH/SPI3_FLASH/NAND_BCH
+                              JTAG/SPI2_EEPROM/SD_SSP0/SD_SSP1
 
   - An optional "DCD" blocks can be added at the begining of the configuration
     file. Note that the DCD is only supported on i.MX28.
@@ -99,7 +99,7 @@ These semantics and rules will be outlined now.
       configuration file.
     - The DCD block has the following semantics:
 
-        DCD u32_DCD_block_ID
+       DCD u32_DCD_block_ID
        - u32_DCD_block_ID      :: The ID number of the DCD block, must match
                                   the ID number used by "LOAD DCD" instruction.
 
index a8fdfcd372a2bed49ee34b93e7200ed5fae737d3..586ed7c1cc0c956794f27789de9f92feab93a870 100644 (file)
@@ -62,7 +62,7 @@ Available additional commands/variables:
  * run trymmcscriptboot - Try to load and boot script ${mmcscriptfile}
  * run trymmckernboot - Try to load and boot kernel image ${mmckernfile}
  * run trymmckerninitrdboot - Try to load and boot kernel image ${mmckernfile}
-                              with initrd image ${mmcinitrdfile}
+                             with initrd image ${mmcinitrdfile}
 
 Additional variables for loading files from mmc:
 
index 8ed45fb46d11558fde117eb80da6aafcead4d463..5cc546a36ff68143e473e7357f19e4d5716f4936 100644 (file)
@@ -23,11 +23,11 @@ methods could be handy.
    the board.And then execute the bootloader from DDR.
    Some usecases where this may be used:
       - While developing some new feature of u-boot, for example USB driver or
-        SPI driver.
-        Suppose the board already has a working bootloader on it. And you would
-        prefer to keep it intact, at the same time want to test your bootloader.
-        In this case you can get your test bootloader binary into DDR via tftp
-        for example. Then execute the test bootloader.
+       SPI driver.
+       Suppose the board already has a working bootloader on it. And you would
+       prefer to keep it intact, at the same time want to test your bootloader.
+       In this case you can get your test bootloader binary into DDR via tftp
+       for example. Then execute the test bootloader.
      - Suppose a platform already has a propreitery bootloader which does not
        support for example AMP boot. In this case also RAM boot loader can be
        utilized.
index 8106290ed9f59206779109446b0bce35abda64fd..f0c9699773c13d4ad1641402797f4b8f386e4659 100644 (file)
@@ -63,20 +63,20 @@ In:    serial
 Out:   serial
 Err:   serial
 =>trace stats
-        671,406 function sites
-         69,712 function calls
-              0 untracked function calls
-         73,373 traced function calls
-             16 maximum observed call depth
-             15 call depth limit
-         66,491 calls not traced due to depth
+       671,406 function sites
+        69,712 function calls
+             0 untracked function calls
+        73,373 traced function calls
+            16 maximum observed call depth
+            15 call depth limit
+        66,491 calls not traced due to depth
 =>trace stats
-        671,406 function sites
+       671,406 function sites
       1,279,450 function calls
-              0 untracked function calls
-        950,490 traced function calls (333217 dropped due to overflow)
-             16 maximum observed call depth
-             15 call depth limit
+             0 untracked function calls
+       950,490 traced function calls (333217 dropped due to overflow)
+            16 maximum observed call depth
+            15 call depth limit
       1,275,767 calls not traced due to depth
 =>trace calls 0 e00000
 Call list dumped to 00000000, size 0xae0a40
index d82c75c848401adef8b40033f01dcd6652519825..9efab6cdc998ad078438d2813bd4db2431f73728 100644 (file)
@@ -188,8 +188,8 @@ ubifsls [directory]
 For example:
 
 => ubifsls
-            17442  Thu Jan 01 02:57:38 1970  imx28-evk.dtb
-          2998146  Thu Jan 01 02:57:43 1970  zImage
+           17442  Thu Jan 01 02:57:38 1970  imx28-evk.dtb
+         2998146  Thu Jan 01 02:57:43 1970  zImage
 
 
 And the ubifsload command allows you to load a file from a UBI
index f5998f2f887751fb0e4cf50df771098c78ada5d5..7f237c4076ff2cf87379389d971c2864bd130561 100644 (file)
@@ -7,20 +7,20 @@ Steps to test:
 
 1. After applying the patch, zfs specific commands can be seen
    in the boot loader prompt using
-        UBOOT #help
+       UBOOT #help
 
-        zfsload- load binary file from a ZFS file system
-        zfsls  - list files in a directory (default /)
+       zfsload- load binary file from a ZFS file system
+       zfsls  - list files in a directory (default /)
 
 2. To list the files in zfs pool, device or partition, execute
-        zfsls <interface> <dev[:part]> [POOL/@/dir/file]
-        For example:
-        UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/
+       zfsls <interface> <dev[:part]> [POOL/@/dir/file]
+       For example:
+       UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/
 
 3. To read and load a file from an ZFS formatted partition to RAM, execute
-        zfsload <interface> <dev[:part]> [addr] [filename] [bytes]
-        For example:
-        UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage
+       zfsload <interface> <dev[:part]> [addr] [filename] [bytes]
+       For example:
+       UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage
 
 References :
        -- ZFS GRUB sources from Solaris GRUB-0.97
index 4e1318871a8d9f7f6f329800d6394158e42f85dd..60323335b83e98ffa849dbe1fe055a091ecab5da 100644 (file)
@@ -94,12 +94,12 @@ Pavel Herrmann <morpheus.ibis@gmail.com>
     driver_activate(instance *inst);
       This call will recursively activate all devices necessary for using the
       specified device. the code could be simplified as:
-        {
-        if (is_activated(inst))
-          return;
-        driver_activate(inst->bus);
-        get_driver(inst)->probe(inst);
-        }
+       {
+       if (is_activated(inst))
+         return;
+       driver_activate(inst->bus);
+       get_driver(inst)->probe(inst);
+       }
 
       The case with multiple parents will need to be handled here as well.
       get_driver is an accessor to available drivers, which will get struct
@@ -107,12 +107,12 @@ Pavel Herrmann <morpheus.ibis@gmail.com>
 
     i2c_write(instance *inst, ...);
       An actual call to some method of the driver. This code will look like:
-        {
-        driver_activate(inst);
-        struct instance *core = get_core_instance(CORE_I2C);
-        device_ops = get_ops(inst);
-        device_ops->write(...);
-        }
+       {
+       driver_activate(inst);
+       struct instance *core = get_core_instance(CORE_I2C);
+       device_ops = get_ops(inst);
+       device_ops->write(...);
+       }
 
       get_ops will not be an exported function, it will be internal and specific
       to the core, as it needs to know how are the ops stored, and what type
index 185f477b06362be3f4224787b61c1249a440f088..9f03bbaad377b70762813dbf2e4c5bbd29190931 100644 (file)
@@ -87,7 +87,7 @@ III) The drivers
   of the cores.
 
   FIXME: Should *cores[] be really struct driver, pointing to drivers that
-         represent the cores? Shouldn't it be core instance pointer?
+        represent the cores? Shouldn't it be core instance pointer?
 
   2) Instantiation of a driver
   ----------------------------
@@ -101,7 +101,7 @@ III) The drivers
   functions.
 
   FIXME: We need some functions that will return list of busses of certain type
-         registered with the system so the user can find proper instance even if
+        registered with the system so the user can find proper instance even if
         he has no bus pointer (this will come handy if the user isn't
         registering the driver from board init function, but somewhere else).
 
@@ -183,12 +183,12 @@ III) The drivers
   int driver_bind(struct instance *in)
   {
        ...
-        core_bind(&core_i2c_static_instance, in, i2c_bus_funcs);
-        ...
+       core_bind(&core_i2c_static_instance, in, i2c_bus_funcs);
+       ...
   }
 
   FIXME: What if we need to run-time determine, depending on some hardware
-         register, what kind of i2c_bus_funcs to pass?
+        register, what kind of i2c_bus_funcs to pass?
 
   This makes the i2c core aware of a new bus. The i2c_bus_funcs is a constant
   structure of functions any i2c bus driver must provide to work. This will
@@ -196,7 +196,7 @@ III) The drivers
   the pointer to the instance of a core this driver provides function to.
 
   FIXME: Maybe replace "core-i2c" with CORE_I2C global pointer to an instance of
-         the core?
+        the core?
 
   4) The instantiation of a core driver
   -------------------------------------
index 8ff0a965c7003d0edd7b33dd144e641c211837b4..87554dde68f47e270e769cc7732cba87a1b4bde5 100644 (file)
@@ -56,11 +56,11 @@ II) Approach
 
   struct gpio_driver_ops {
     int  (*gpio_request)(struct instance *i, unsigned gpio,
-                         const char *label);
+                        const char *label);
     int  (*gpio_free)(struct instance *i, unsigned gpio);
     int  (*gpio_direction_input)(struct instance *i, unsigned gpio);
     int  (*gpio_direction_output)(struct instance *i, unsigned gpio,
-                                  int value);
+                                 int value);
     int  (*gpio_get_value)(struct instance *i, unsigned gpio);
     void (*gpio_set_value)(struct instance *i, unsigned gpio, int value);
   }
index cc5d529c3b539966e67273d10e971965f976320e..9048cc0f005a9a44b01cebd8788edd2c4f641b59 100644 (file)
@@ -36,15 +36,15 @@ II) Approach
   In the UDM each hwmon driver would register itself by a function
 
     int hwmon_device_register(struct instance *i,
-                              struct hwmon_device_ops *o);
+                             struct hwmon_device_ops *o);
 
   The structure being defined as follows:
 
     struct hwmon_device_ops {
-        int  (*read)(struct instance *i, int sensor, int reg);
-        int  (*write)(struct instance *i, int sensor, int reg,
-                      int val);
-        int  (*get_temp)(struct instance *i, int sensor);
+       int  (*read)(struct instance *i, int sensor, int reg);
+       int  (*write)(struct instance *i, int sensor, int reg,
+                     int val);
+       int  (*get_temp)(struct instance *i, int sensor);
     };
 
 
index bed430643bf4a3ce8eb1a3f3158197eaefe586e2..1f07d874ea2b7e492039f064d9ddd742cede912b 100644 (file)
@@ -107,7 +107,7 @@ struct mmc {
 
   /* DRIVER: Function used to submit command to the card */
   int (*send_cmd)(struct mmc *mmc,
-                  struct mmc_cmd *cmd, struct mmc_data *data);
+                 struct mmc_cmd *cmd, struct mmc_data *data);
 
   /* DRIVER: Function used to configure the host */
   void (*set_ios)(struct mmc *mmc);
@@ -139,7 +139,7 @@ provided by the MMC driver:
 struct mmc_driver_ops {
   /* Function used to submit command to the card */
   int  (*send_cmd)(struct mmc *mmc,
-                  struct mmc_cmd *cmd, struct mmc_data *data);
+                 struct mmc_cmd *cmd, struct mmc_data *data);
   /* DRIVER: Function used to configure the host */
   void (*set_ios)(struct mmc *mmc);
   /* Function used to initialize the host */
@@ -206,7 +206,7 @@ struct mmc_card_props {
 The probe() function will then register the MMC driver by calling:
 
   mmc_device_register(struct instance *i, struct mmc_driver_ops *o,
-                                          struct mmc_driver_params *p);
+                                         struct mmc_driver_params *p);
 
 The struct mmc_driver_params will have to be dynamic in some cases, but the
 driver shouldn't modify it's contents elsewhere than in probe() call.
index 9ac1a5fbb585e34eb0b2378cc4c3b9c0501c2aa2..015c7737f6a23ffd3d55c76b58babb0c92db1ac6 100644 (file)
@@ -57,20 +57,20 @@ III) Analysis of in-tree drivers
   All methods of this file are moved to another location.
     void ftpmu010_32768osc_enable(void): Move to boards hacks
     void ftpmu010_mfpsr_select_dev(unsigned int dev): Move to board file
-                                                      arch/nds32/lib/board.c
+                                                     arch/nds32/lib/board.c
     void ftpmu010_mfpsr_diselect_dev(unsigned int dev): Dead code
     void ftpmu010_dlldis_disable(void): Dead code
     void ftpmu010_sdram_clk_disable(unsigned int cr0): Move to board file
-                                                       arch/nds32/lib/board.c
+                                                      arch/nds32/lib/board.c
     void ftpmu010_sdramhtc_set(unsigned int val): Move to board file
-                                                  arch/nds32/lib/board.c
+                                                 arch/nds32/lib/board.c
 
   2) twl4030.c
   ------------
   All methods of this file are moved to another location.
     void twl4030_power_reset_init(void): Move to board hacks
     void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val, u8 dev_grp,
-                                 u8 dev_grp_sel): Move to board hacks
+                                u8 dev_grp_sel): Move to board hacks
     void twl4030_power_init(void): Move to board hacks
     void twl4030_power_mmc_init(void): Move to board hacks
 
@@ -83,6 +83,6 @@ III) Analysis of in-tree drivers
     int twl6030_get_battery_voltage(void): Convert to new API
     void twl6030_init_battery_charging(void): Convert to new API
     void twl6030_power_mmc_init(): Move to board file
-                                   drivers/mmc/omap_hsmmc.c
+                                  drivers/mmc/omap_hsmmc.c
     void twl6030_usb_device_settings(): Move to board file
-                                        drivers/usb/musb/omap3.c
+                                       drivers/usb/musb/omap3.c
index 6aaeb86f2710bd09b6e6b2e03a8543c2296bd914..8391f387236ce4821bbffcc73153cbed1ff5349c 100644 (file)
@@ -12,15 +12,15 @@ U-Boot currently implements one common API for RTC devices. The interface
 is defined in include/rtc.h and comprises of functions and structures:
 
     struct rtc_time {
-        int tm_sec;
-        int tm_min;
-        int tm_hour;
-        int tm_mday;
-        int tm_mon;
-        int tm_year;
-        int tm_wday;
-        int tm_yday;
-        int tm_isdst;
+       int tm_sec;
+       int tm_min;
+       int tm_hour;
+       int tm_mday;
+       int tm_mon;
+       int tm_year;
+       int tm_wday;
+       int tm_yday;
+       int tm_isdst;
     };
 
     int rtc_get (struct rtc_time *);
@@ -42,14 +42,14 @@ II) Approach
   In the UDM each rtc driver would register itself by a function
 
     int rtc_device_register(struct instance *i,
-                            struct rtc_device_ops *o);
+                           struct rtc_device_ops *o);
 
   The structure being defined as follows:
 
     struct rtc_device_ops {
-        int  (*get_time)(struct instance *i, struct rtc_time *t);
-        int  (*set_time)(struct instance *i, struct rtc_time *t);
-        int  (*reset)(struct instance *i);
+       int  (*get_time)(struct instance *i, struct rtc_time *t);
+       int  (*set_time)(struct instance *i, struct rtc_time *t);
+       int  (*reset)(struct instance *i);
     };
 
 
index 7442a32bd0282610f9173da7e0b3f1b99f7212f2..6e6acc8787163ace4329c85093cd2b4ff5be134e 100644 (file)
@@ -15,12 +15,12 @@ I) Overview
 
   void spi_init(void);
   struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
-                                    unsigned int max_hz, unsigned int mode);
+                                   unsigned int max_hz, unsigned int mode);
   void spi_free_slave(struct spi_slave *slave);
   int  spi_claim_bus(struct spi_slave *slave);
   void spi_release_bus(struct spi_slave *slave);
   int  spi_xfer(struct spi_slave *slave, unsigned int bitlen,
-                const void *dout, void *din, unsigned long flags);
+               const void *dout, void *din, unsigned long flags);
   int  spi_cs_is_valid(unsigned int bus, unsigned int cs);
   void spi_cs_activate(struct spi_slave *slave);
   void spi_cs_deactivate(struct spi_slave *slave);
@@ -69,13 +69,13 @@ II) Approach
 
   struct ops {
     int  (*spi_request_bus)(struct instance *i, unsigned int bus,
-                            unsigned int cs, unsigned int max_hz,
-                            unsigned int mode);
+                           unsigned int cs, unsigned int max_hz,
+                           unsigned int mode);
     void (*spi_release_bus)(struct instance *i);
     int  (*spi_xfer) (struct instance *i, unsigned int bitlen,
-                      const void *dout, void *din, unsigned long flags);
+                     const void *dout, void *din, unsigned long flags);
     int  (*spi_cs_is_valid)(struct instance *i, unsigned int bus,
-                            unsigned int cs);
+                           unsigned int cs);
     void (*spi_cs_activate)(struct instance *i);
     void (*spi_cs_deactivate)(struct instance *i);
     void (*spi_set_speed)(struct instance *i, uint hz);
index a6c484f37c2980cdb6edddc96c47089afa4d2ed8..c0b1c90b29603dbd1e6b4fb55a5b1d539f01937d 100644 (file)
@@ -17,29 +17,29 @@ Each device that wants to register with STDIO subsystem has to define struct
 stdio_dev, defined in include/stdio_dev.h and containing the following fields:
 
 struct stdio_dev {
-        int     flags;                  /* Device flags: input/output/system */
-        int     ext;                    /* Supported extensions              */
-        char    name[16];               /* Device name                       */
+       int     flags;                  /* Device flags: input/output/system */
+       int     ext;                    /* Supported extensions              */
+       char    name[16];               /* Device name                       */
 
 /* GENERAL functions */
 
-        int (*start) (void);            /* To start the device               */
-        int (*stop) (void);             /* To stop the device                */
+       int (*start) (void);            /* To start the device               */
+       int (*stop) (void);             /* To stop the device                */
 
 /* OUTPUT functions */
 
-        void (*putc) (const char c);    /* To put a char                     */
-        void (*puts) (const char *s);   /* To put a string (accelerator)     */
+       void (*putc) (const char c);    /* To put a char                     */
+       void (*puts) (const char *s);   /* To put a string (accelerator)     */
 
 /* INPUT functions */
 
-        int (*tstc) (void);             /* To test if a char is ready...     */
-        int (*getc) (void);             /* To get that char                  */
+       int (*tstc) (void);             /* To test if a char is ready...     */
+       int (*getc) (void);             /* To get that char                  */
 
 /* Other functions */
 
-        void *priv;                     /* Private extensions                */
-        struct list_head list;
+       void *priv;                     /* Private extensions                */
+       struct list_head list;
 };
 
 Currently used flags are DEV_FLAGS_INPUT, DEV_FLAGS_OUTPUT and DEV_FLAGS_SYSTEM,
@@ -139,13 +139,13 @@ II) Approach
   purpose. The following flags will be defined:
 
     STDIO_FLG_STDIN ..... This device will be used as an input device. All input
-                          from all devices with this flag set will be received
+                         from all devices with this flag set will be received
                          and passed to the upper layers.
     STDIO_FLG_STDOUT .... This device will be used as an output device. All
-                          output sent to stdout will be routed to all devices
+                         output sent to stdout will be routed to all devices
                          with this flag set.
     STDIO_FLG_STDERR .... This device will be used as an standard error output
-                          device. All output sent to stderr will be routed to
+                         device. All output sent to stderr will be routed to
                          all devices with this flag set.
 
   The "list" member of this structure allows to have a linked list of all
index 91a953a72e14443212831171a7912658acc566f8..0beff4a85726d38d7bad0030bde59dfd7626a366 100644 (file)
@@ -14,7 +14,7 @@ controlling it is very much based on this. The API is very simple:
   int tis_open(void);
   int tis_close(void);
   int tis_sendrecv(const u8 *sendbuf, size_t send_size,
-                         u8 *recvbuf, size_t *recv_len);
+                        u8 *recvbuf, size_t *recv_len);
 
 The command operating the TPM chip only provides operations to send and receive
 bytes from the chip.
index 7db328639fe63fd764519ab120002d0c31ee81d5..7948e5926053886e9797e7bfd485d50e861f602c 100644 (file)
@@ -41,13 +41,13 @@ II) Approach
   In the UDM each watchdog driver would register itself by a function
 
     int watchdog_device_register(struct instance *i,
-                                 const struct watchdog_device_ops *o);
+                                const struct watchdog_device_ops *o);
 
   The structure being defined as follows:
 
     struct watchdog_device_ops {
-        int (*disable)(struct instance *i);
-        void (*reset)(struct instance *i);
+       int (*disable)(struct instance *i);
+       void (*reset)(struct instance *i);
     };
 
   The watchdog_init() function will be dissolved into probe() function.
index a7476b49bb0e5688d2b84fccb10f7cf6f14cac7a..29521359a50da56e1017e2580ab6e6e33b1bfd9d 100644 (file)
@@ -59,20 +59,20 @@ static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst)
        if (large) {
                fmr |= FMR_ECCM;
                out_be32(&regs->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) |
-                                    (NAND_CMD_READSTART << FCR_CMD1_SHIFT));
+                                    (NAND_CMD_READSTART << FCR_CMD1_SHIFT));
                out_be32(&regs->fir,
-                        (FIR_OP_CW0 << FIR_OP0_SHIFT) |
-                        (FIR_OP_CA  << FIR_OP1_SHIFT) |
-                        (FIR_OP_PA  << FIR_OP2_SHIFT) |
-                        (FIR_OP_CW1 << FIR_OP3_SHIFT) |
-                        (FIR_OP_RBW << FIR_OP4_SHIFT));
+                        (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+                        (FIR_OP_CA  << FIR_OP1_SHIFT) |
+                        (FIR_OP_PA  << FIR_OP2_SHIFT) |
+                        (FIR_OP_CW1 << FIR_OP3_SHIFT) |
+                        (FIR_OP_RBW << FIR_OP4_SHIFT));
        } else {
                out_be32(&regs->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT);
                out_be32(&regs->fir,
-                        (FIR_OP_CW0 << FIR_OP0_SHIFT) |
-                        (FIR_OP_CA  << FIR_OP1_SHIFT) |
-                        (FIR_OP_PA  << FIR_OP2_SHIFT) |
-                        (FIR_OP_RBW << FIR_OP3_SHIFT));
+                        (FIR_OP_CW0 << FIR_OP0_SHIFT) |
+                        (FIR_OP_CA  << FIR_OP1_SHIFT) |
+                        (FIR_OP_PA  << FIR_OP2_SHIFT) |
+                        (FIR_OP_RBW << FIR_OP3_SHIFT));
        }
 
        out_be32(&regs->fbcr, 0);
index a0fe1e09ecdfee661c84982565d1ed5bbc8bf5dd..3ae0044f26e8ba42bbb429cc542e68a2e9fa4a45 100644 (file)
@@ -112,10 +112,10 @@ static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
        fsl_upm_run_pattern(&fun->upm, fun->width, io_addr, mar);
 
        /*
-         * Some boards/chips needs this.  At least the MPC8360E-RDK
-         * needs it.  Probably weird chip, because I don't see any
-         * need for this on MPC8555E + Samsung K9F1G08U0A.  Usually
-         * here are 0-2 unexpected busy states per block read.
+        * Some boards/chips needs this.  At least the MPC8360E-RDK
+        * needs it.  Probably weird chip, because I don't see any
+        * need for this on MPC8555E + Samsung K9F1G08U0A.  Usually
+        * here are 0-2 unexpected busy states per block read.
         */
        if (fun->wait_flags & FSL_UPM_WAIT_RUN_PATTERN)
                fun_wait(fun);
index d4d586c94265f2e4834dd05995911b260007aea4..1ce55fde8b7b9191e31f63c773f00a2d10fe3b0e 100644 (file)
@@ -3282,7 +3282,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 
        case NAND_ECC_NONE:
                pr_warn("NAND_ECC_NONE selected by board driver. "
-                       "This is not recommended !!\n");
+                       "This is not recommended !!\n");
                chip->ecc.read_page = nand_read_page_raw;
                chip->ecc.write_page = nand_write_page_raw;
                chip->ecc.read_oob = nand_read_oob_std;
index d149a6dae67f4d89b1bbe72b4a4d18a951564c8d..5246bbf1ac28ab1b87e06551c3af32cfe01ea1bd 100644 (file)
@@ -142,8 +142,8 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
                        ops.mode = MTD_OPS_AUTO_OOB;
 
                        result = mtd_write_oob(meminfo,
-                                                   erase.addr,
-                                                   &ops);
+                                                   erase.addr,
+                                                   &ops);
                        if (result != 0) {
                                printf("\n%s: MTD writeoob failure: %d\n",
                                       mtd_device, result);
index ab439b3e208578383252371071ca6e27cc966aae..f1bebf58c12816ff5e33890f3afc561437affbcd 100644 (file)
@@ -102,7 +102,7 @@ u32 crc32_le(u32 crc, unsigned char const *p, size_t len)
        if((len >= 4)){
                /* load data 32 bits wide, xor data 32 bits wide. */
                size_t save_len = len & 3;
-               len = len >> 2;
+               len = len >> 2;
                --b; /* use pre increment below(*++b) for speed */
                do {
                        crc ^= *++b;
@@ -200,7 +200,7 @@ u32 __attribute_pure__ crc32_be(u32 crc, unsigned char const *p, size_t len)
        if(likely(len >= 4)){
                /* load data 32 bits wide, xor data 32 bits wide. */
                size_t save_len = len & 3;
-               len = len >> 2;
+               len = len >> 2;
                --b; /* use pre increment below(*++b) for speed */
                do {
                        crc ^= *++b;
index ffb8ea01dcc43d0de421ad2569991b42f328467e..f7170e055460832011de5d8fb28f0a66d22a0f4f 100644 (file)
@@ -17,7 +17,7 @@ V0.11 06/20/2001      REG_0A bit3=1, default enable BP with DA match
                R17 = (R17 & 0xfff0) | NF
 
 v1.00                  modify by simon 2001.9.5
-                       change for kernel 2.4.x
+                       change for kernel 2.4.x
 
 v1.1   11/09/2001      fix force mode bug
 
index 308bf8fe313738344b4a1df84d04a01e8aa285cc..f869514f29511322ff3ff9414ccfa6c3f315e527 100644 (file)
@@ -260,7 +260,7 @@ static int plb2800_eth_recv(struct eth_device *dev)
                        printf("Received %d bytes\n", length);
 #endif
                        NetReceive((void*)(NetRxPackets[rx_new]),
-                                   length - 4);
+                                   length - 4);
                }
                else
                {
index 5de695384f1588dfa4e49dcd4ea90339ffa46c0a..21a2189e2753b8d2fffceecc41a5e3c2b4c780e6 100644 (file)
@@ -68,7 +68,7 @@ int rtc_set(struct rtc_time *tmp)
 
        /* Calculate number of seconds this incoming time represents */
        remain = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday,
-                       tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+                       tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
 
        /* Figure out how many days since epoch */
        days = remain / NUM_SECS_IN_DAY;
index 11cc719828d6ac65499436a26473062b2df03ab5..c4d1259a898d2e885eea0d76a6f16ad1c07e7434 100644 (file)
@@ -73,7 +73,7 @@ int rtc_set(struct rtc_time *tmp)
 
        /* Calculate number of seconds this incoming time represents */
        tim = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday,
-                       tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+                       tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
 
        RTC_WRITE_REG(RTC_LR, tim);
 
index 348361a7fd078d1cbcc5f1a0f926faa2a7173c03..0d59c361513319f796ac6bf82671616d07b67625 100644 (file)
@@ -110,10 +110,10 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
                if (bitlen <= 16) {
                        if (bitlen <= 4)
                                spi->mode = (spi->mode & 0xff0fffff) |
-                                           (3 << 20);
+                                           (3 << 20);
                        else
                                spi->mode = (spi->mode & 0xff0fffff) |
-                                           ((bitlen - 1) << 20);
+                                           ((bitlen - 1) << 20);
                } else {
                        spi->mode = (spi->mode & 0xff0fffff);
                        /* Set up the next iteration if sending > 32 bits */
index 3b38c344306319937a1258f34ab1beff352b6884..e80be8eaac27741e3fa179fb228aa224f8c5ff22 100644 (file)
@@ -50,7 +50,7 @@ static void omap3_spi_write_chconf(struct omap3_spi_slave *ds, int val)
 static void omap3_spi_set_enable(struct omap3_spi_slave *ds, int enable)
 {
        writel(enable, &ds->regs->channel[ds->slave.cs].chctrl);
-        /* Flash post writes to make immediate effect */
+       /* Flash post writes to make immediate effect */
        readl(&ds->regs->channel[ds->slave.cs].chctrl);
 }
 
@@ -253,9 +253,9 @@ int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp,
                writel(txp[i], &ds->regs->channel[ds->slave.cs].tx);
        }
 
-        /* wait to finish of transfer */
-        while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
-                         OMAP3_MCSPI_CHSTAT_EOT));
+       /* wait to finish of transfer */
+       while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
+                        OMAP3_MCSPI_CHSTAT_EOT));
 
        /* Disable the channel otherwise the next immediate RX will get affected */
        omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
@@ -359,7 +359,7 @@ int omap3_spi_txrx(struct spi_slave *slave,
                rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx);
        }
        /* Disable the channel */
-        omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
+       omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
 
        /*if transfer must be terminated disable the channel*/
        if (flags & SPI_XFER_END) {
index 065904555f77690877ff74682e91e8850303688c..9dd638bb9e454da11d225bfd8b2b6d687a91fb57 100644 (file)
@@ -92,7 +92,7 @@ static inline void radeon_engine_flush (struct radeonfb_info *rinfo)
 
        /* initiate flush */
        OUTREGP(RB2D_DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL,
-               ~RB2D_DC_FLUSH_ALL);
+               ~RB2D_DC_FLUSH_ALL);
 
        for (i=0; i < 2000000; i++) {
                if (!(INREG(RB2D_DSTCACHE_CTLSTAT) & RB2D_DC_BUSY))
index 9acf243eeff42bf88f56a23ef8d7258ac1f4692f..67f115f2e8aaba24f18494b8063f43d9b5e0db3d 100644 (file)
@@ -771,7 +771,7 @@ static int mount_ubifs(struct ubifs_info *c)
        dbg_msg("node sizes:          ref %zu, cmt. start %zu, orph %zu",
                UBIFS_REF_NODE_SZ, UBIFS_CS_NODE_SZ, UBIFS_ORPH_NODE_SZ);
        dbg_msg("max. node sizes:     data %zu, inode %zu dentry %zu",
-               UBIFS_MAX_DATA_NODE_SZ, UBIFS_MAX_INO_NODE_SZ,
+               UBIFS_MAX_DATA_NODE_SZ, UBIFS_MAX_INO_NODE_SZ,
                UBIFS_MAX_DENT_NODE_SZ);
        dbg_msg("dead watermark:      %d", c->dead_wm);
        dbg_msg("dark watermark:      %d", c->dark_wm);
index 08271132dc2e933a5704c4cefed57393683d83f2..5ffa6e4b449fce4fa1a6f016027ead4bed360efc 100644 (file)
        "flash_self=run ramargs addip addtty optargs;"                  \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "net_nfs=tftp 200000 ${img};run nfsargs addip addtty optargs;"  \
-               "bootm\0"                                               \
+               "bootm\0"                                               \
        "rootpath=/tftpboot/du440/target_root_du440\0"                  \
        "img=/tftpboot/du440/uImage\0"                                  \
        "kernel_addr=FFC00000\0"                                        \
index 6328ba9bf4a108a7a184a102064390c0db31c2ac..354e9d211bd40afc13e3e35bcfba67b37d25869d 100644 (file)
@@ -85,7 +85,7 @@
        "flash_self=run ramargs addip addtty;"                          \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-               "bootm\0"                                               \
+               "bootm\0"                                               \
        "rootpath=/opt/eldk/ppc_74xx\0"                                 \
        "bootfile=/tftpboot/p3g4/uImage\0"                              \
        "kernel_addr=ff000000\0"                                        \
index 3970dc36f12bdf116bb4b7c12c6289a2d868367b..7b10d289b9524e15a2d80e224a471fcbde7475ee 100644 (file)
  */
 #define SCCR_MASK      SCCR_EBDF11
 #define CONFIG_SYS_SCCR        (SCCR_RTDIV   | SCCR_RTSEL    | SCCR_CRQEN    | \
-                        SCCR_PRQEN   | SCCR_EBDF00   | \
-                        SCCR_COM01   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+                        SCCR_PRQEN   | SCCR_EBDF00   | \
+                        SCCR_COM01   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
                         SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD001 | \
                         SCCR_DFALCD00)
 
 
 #define CONFIG_SYS_OR1_PRELIM  (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_MSYS)
 #define CONFIG_SYS_BR1_PRELIM  ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | \
-                         BR_PS_8 | BR_V)
+                         BR_PS_8 | BR_V)
 
 /*
  * BR4 and OR4 (SDRAM)
index 86b874cfe27670dc5d735b839602a9fe41c805a5..f0a89623c3ba7557d7ca20633c5ea0ad3c96ccea 100644 (file)
        "flash_self=run ramargs addip addtty;"                          \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-               "bootm\0"                                               \
+               "bootm\0"                                               \
        "net_nfs_fdt=tftp 200000 ${bootfile};"                          \
                "tftp ${fdt_addr} ${fdt_file};"                         \
                "run nfsargs addip addtty;"                             \
index baa2635c137a6fbd8c7c85938d73d201b5bb5a28..c1e996e448c09f5b0103b7503765eb7b2908ca97 100644 (file)
 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
-                                                        CONFIG_SYS_INIT_RAM_SIZE - \
-                                                        GENERATED_GBL_DATA_SIZE)
+                                                        CONFIG_SYS_INIT_RAM_SIZE - \
+                                                        GENERATED_GBL_DATA_SIZE)
 
 /* SRAM config */
 #define CONFIG_SYS_SRAM_START              0x40200000
index d94e9c60eafa12a0b04dc37959084300d9a8b193..8157f47cced698a27fc7de068c22053c429c97ac 100644 (file)
        "flash_self=run ramargs addip addtty;"                          \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-               "bootm\0"                                               \
+               "bootm\0"                                               \
        "rootpath=/opt/eldk/ppc_6xx\0"                                  \
        "u-boot=p3mx/u-boot/u-boot.bin\0"                               \
        "load=tftp 100000 ${u-boot}\0"                                  \
index 5e5adbc61aebb22cf6f18c69b90fae35f867734a..f6cb813bc8f80f275e285a9ea76fdb91f0f304c8 100644 (file)
        "flash_self=run ramargs addip addtty;"                          \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-               "bootm\0"                                               \
+               "bootm\0"                                               \
        "rootpath=/opt/eldk/ppc_4xx\0"                                  \
        "bootfile=/tftpboot/p3p440/uImage\0"                            \
        "kernel_addr=ff800000\0"                                        \
index e397615f0d1994d186a4fb78544ae7c3671feb40..7cf22ba7639423e4273f90cfde8985af209b8840 100644 (file)
        "flash_self=run ramargs addip addtty;"                          \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-               "bootm\0"                                               \
+               "bootm\0"                                               \
        "rootpath=/opt/eldk/ppc_4xx\0"                                  \
        "bootfile=/tftpboot/pcs440ep/uImage\0"                          \
        "kernel_addr=FFF00000\0"                                        \
index c6640100677c865b12abb4bac09b02bc4342a039..d3e9017a005b25131e8ab96f9284bbf931ef7287 100644 (file)
        "flash_self=run ramargs addip addtty;"                          \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-               "bootm\0"                                               \
+               "bootm\0"                                               \
        "rootpath=/opt/buildroot\0"                                     \
        "bootfile=/tftpboot/netbox/uImage\0"                            \
        "kernel_addr=50080000\0"                                        \
 #define I2C_TRISTATE   GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_I2C_SDA)
 #define I2C_READ       ((*IXP425_GPIO_GPINR & PB_SDA) != 0)
 #define I2C_SDA(bit)   if (bit) GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_I2C_SDA);      \
-                       else     GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SDA)
+                       else     GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SDA)
 #define I2C_SCL(bit)   if (bit) GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_I2C_SCL);      \
                        else     GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SCL)
 #define I2C_DELAY      udelay(3)       /* 1/4 I2C clock duration */
index 8bf7353bc1f3653f33e008c329acb127d3ed2189..faae7ffd263605983e1eb1cd64a0c4688bb7791f 100644 (file)
@@ -65,7 +65,7 @@
        "flash_self=run ramargs addip addtty;"                          \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-               "bootm\0"                                               \
+               "bootm\0"                                               \
        "rootpath=/opt/eldk/ppc_8xx\0"                                  \
        "bootfile=/tftpboot/uc100/uImage\0"                             \
        "kernel_addr=40000000\0"                                        \
index 8d0db5c4417734385af87cc101b436598d585adb..237fcb15127222b7fa6613fe6daea730d264955a 100644 (file)
                " ramdisk_size=${ramdisk_size}\0"                       \
        "addip=setenv bootargs ${bootargs} "                            \
                "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
-               ":${hostname}:${netdev}:off panic=1\0"                  \
+               ":${hostname}:${netdev}:off panic=1\0"                  \
        "addtty=setenv bootargs ${bootargs} console=ttyS0,"             \
                "${baudrate}\0"                                         \
        "net_nfs=tftp ${kernel_mem_addr} ${file_kernel};"               \
        "file_fs=/zeus/rootfs_ba.img\0"                                 \
        "tftp_fs=tftp 100000 ${file_fs}\0"                              \
        "update_fs=protect off ff300000 ff87ffff;era ff300000 ff87ffff;"\
-               "cp.b 100000 ff300000 580000\0"                         \
+               "cp.b 100000 ff300000 580000\0"                         \
        "upd_fs=run tftp_fs;run update_fs\0"                            \
        "bootcmd=chkreset;run ramargs addip addtty addmisc;"            \
                "bootm ${kernel_fl_addr} ${ramdisk_fl_addr}\0"          \
index 9e74d8729e23c2a56c48424a84a8a76210a66529..f5809e5e1bfcaa7e1d4526237f0c976e95f3d30d 100644 (file)
@@ -39,7 +39,7 @@ typedef struct ddr1_spd_eeprom_s {
        unsigned char dev_attr;    /* 22 SDRAM Device Attributes */
        unsigned char clk_cycle2;  /* 23 Min SDRAM Cycle time @ CL=X-0.5 */
        unsigned char clk_access2; /* 24 SDRAM Access from
-                                        Clk @ CL=X-0.5 (tAC) */
+                                        Clk @ CL=X-0.5 (tAC) */
        unsigned char clk_cycle3;  /* 25 Min SDRAM Cycle time @ CL=X-1 */
        unsigned char clk_access3; /* 26 Max Access from Clk @ CL=X-1 (tAC) */
        unsigned char trp;         /* 27 Min Row Precharge Time (tRP)*/
@@ -112,9 +112,9 @@ typedef struct ddr2_spd_eeprom_s {
        unsigned char ca_setup;    /* 32 Addr+Cmd Setup Time Before Clk (tIS) */
        unsigned char ca_hold;     /* 33 Addr+Cmd Hold Time After Clk (tIH) */
        unsigned char data_setup;  /* 34 Data Input Setup Time
-                                        Before Strobe (tDS) */
+                                        Before Strobe (tDS) */
        unsigned char data_hold;   /* 35 Data Input Hold Time
-                                        After Strobe (tDH) */
+                                        After Strobe (tDH) */
        unsigned char twr;         /* 36 Write Recovery time tWR */
        unsigned char twtr;        /* 37 Int write to read delay tWTR */
        unsigned char trtp;        /* 38 Int read to precharge delay tRTP */
@@ -128,40 +128,40 @@ typedef struct ddr2_spd_eeprom_s {
        unsigned char pll_relock;  /* 46 PLL Relock time */
        unsigned char Tcasemax;    /* 47 Tcasemax */
        unsigned char psiTAdram;   /* 48 Thermal Resistance of DRAM Package from
-                                        Top (Case) to Ambient (Psi T-A DRAM) */
+                                        Top (Case) to Ambient (Psi T-A DRAM) */
        unsigned char dt0_mode;    /* 49 DRAM Case Temperature Rise from Ambient
-                                        due to Activate-Precharge/Mode Bits
+                                        due to Activate-Precharge/Mode Bits
                                         (DT0/Mode Bits) */
        unsigned char dt2n_dt2q;   /* 50 DRAM Case Temperature Rise from Ambient
-                                        due to Precharge/Quiet Standby
+                                        due to Precharge/Quiet Standby
                                         (DT2N/DT2Q) */
        unsigned char dt2p;        /* 51 DRAM Case Temperature Rise from Ambient
-                                        due to Precharge Power-Down (DT2P) */
+                                        due to Precharge Power-Down (DT2P) */
        unsigned char dt3n;        /* 52 DRAM Case Temperature Rise from Ambient
-                                        due to Active Standby (DT3N) */
+                                        due to Active Standby (DT3N) */
        unsigned char dt3pfast;    /* 53 DRAM Case Temperature Rise from Ambient
-                                        due to Active Power-Down with
+                                        due to Active Power-Down with
                                         Fast PDN Exit (DT3Pfast) */
        unsigned char dt3pslow;    /* 54 DRAM Case Temperature Rise from Ambient
-                                        due to Active Power-Down with Slow
+                                        due to Active Power-Down with Slow
                                         PDN Exit (DT3Pslow) */
        unsigned char dt4r_dt4r4w; /* 55 DRAM Case Temperature Rise from Ambient
-                                        due to Page Open Burst Read/DT4R4W
+                                        due to Page Open Burst Read/DT4R4W
                                         Mode Bit (DT4R/DT4R4W Mode Bit) */
        unsigned char dt5b;        /* 56 DRAM Case Temperature Rise from Ambient
-                                        due to Burst Refresh (DT5B) */
+                                        due to Burst Refresh (DT5B) */
        unsigned char dt7;         /* 57 DRAM Case Temperature Rise from Ambient
-                                        due to Bank Interleave Reads with
+                                        due to Bank Interleave Reads with
                                         Auto-Precharge (DT7) */
        unsigned char psiTApll;    /* 58 Thermal Resistance of PLL Package form
-                                        Top (Case) to Ambient (Psi T-A PLL) */
+                                        Top (Case) to Ambient (Psi T-A PLL) */
        unsigned char psiTAreg;    /* 59 Thermal Reisitance of Register Package
-                                        from Top (Case) to Ambient
+                                        from Top (Case) to Ambient
                                         (Psi T-A Register) */
        unsigned char dtpllactive; /* 60 PLL Case Temperature Rise from Ambient
-                                        due to PLL Active (DT PLL Active) */
+                                        due to PLL Active (DT PLL Active) */
        unsigned char dtregact;    /* 61 Register Case Temperature Rise from
-                                        Ambient due to Register Active/Mode Bit
+                                        Ambient due to Register Active/Mode Bit
                                         (DT Register Active/Mode Bit) */
        unsigned char spd_rev;     /* 62 SPD Data Revision Code */
        unsigned char cksum;       /* 63 Checksum for bytes 0-62 */
index 03e25f37ea7f478548083999c07a679cb280e415..1afa1a27a90ec33f651e8d1a090b555050670773 100644 (file)
@@ -126,7 +126,7 @@ void nand_boot(void)
         * Load U-Boot image from NAND into RAM
         */
        nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
-                 (uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
+                 (uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
 
        /*
         * Jump to U-Boot image
index 878b2ca7abeea993fd0cc2aa588e40fde20125be..8a4b89b9835b166c3a8a4384bb36b527b374b539 100644 (file)
@@ -89,7 +89,7 @@ int cpu_post_test_andi (void)
 
            if (ret != 0)
            {
-               post_log ("Error at andi test %d !\n", i);
+               post_log ("Error at andi test %d !\n", i);
            }
        }
     }
index 66adad8f79aac071b23db62c92999fbba4e423a4..b5c588919e76186703005f41ff8df019cb1b7d2e 100644 (file)
 
 #define ASM_0(opcode)                  (opcode)
 #define ASM_1(opcode, rd)              ((opcode) +             \
-                                        ((rd) << 21))
+                                        ((rd) << 21))
 #define ASM_1C(opcode, cr)             ((opcode) +             \
-                                        ((cr) << 23))
+                                        ((cr) << 23))
 #define ASM_11(opcode, rd, rs)         ((opcode) +             \
-                                        ((rd) << 21) +         \
+                                        ((rd) << 21) +         \
                                         ((rs) << 16))
 #define ASM_11C(opcode, cd, cs)                ((opcode) +             \
-                                        ((cd) << 23) +         \
+                                        ((cd) << 23) +         \
                                         ((cs) << 18))
 #define ASM_11X(opcode, rd, rs)                ((opcode) +             \
-                                        ((rs) << 21) +         \
+                                        ((rs) << 21) +         \
                                         ((rd) << 16))
 #define ASM_11I(opcode, rd, rs, simm)  ((opcode) +             \
-                                        ((rd) << 21) +         \
+                                        ((rd) << 21) +         \
                                         ((rs) << 16) +         \
                                         ((simm) & 0xffff))
 #define ASM_11IF(opcode, rd, rs, simm) ((opcode) +             \
-                                        ((rd) << 21) +         \
+                                        ((rd) << 21) +         \
                                         ((rs) << 16) +         \
                                         ((simm) << 11))
 #define ASM_11S(opcode, rd, rs, sh)    ((opcode) +             \
-                                        ((rs) << 21) +         \
+                                        ((rs) << 21) +         \
                                         ((rd) << 16) +         \
                                         ((sh) << 11))
 #define ASM_11IX(opcode, rd, rs, imm)  ((opcode) +             \
-                                        ((rs) << 21) +         \
+                                        ((rs) << 21) +         \
                                         ((rd) << 16) +         \
                                         ((imm) & 0xffff))
 #define ASM_12(opcode, rd, rs1, rs2)   ((opcode) +             \
-                                        ((rd) << 21) +         \
+                                        ((rd) << 21) +         \
                                         ((rs1) << 16) +        \
                                         ((rs2) << 11))
 #define ASM_12F(opcode, fd, fs1, fs2)  ((opcode) +             \
-                                        ((fd) << 21) +         \
+                                        ((fd) << 21) +         \
                                         ((fs1) << 16) +        \
                                         ((fs2) << 11))
 #define ASM_12X(opcode, rd, rs1, rs2)  ((opcode) +             \
-                                        ((rs1) << 21) +        \
+                                        ((rs1) << 21) +        \
                                         ((rd) << 16) +         \
                                         ((rs2) << 11))
 #define ASM_2C(opcode, cr, rs1, rs2)   ((opcode) +             \
-                                        ((cr) << 23) +         \
+                                        ((cr) << 23) +         \
                                         ((rs1) << 16) +        \
                                         ((rs2) << 11))
 #define ASM_1IC(opcode, cr, rs, imm)   ((opcode) +             \
-                                        ((cr) << 23) +         \
+                                        ((cr) << 23) +         \
                                         ((rs) << 16) +         \
                                         ((imm) & 0xffff))
 #define ASM_122(opcode, rd, rs1, rs2, imm1, imm2)              \
                                        ((opcode) +             \
-                                        ((rs1) << 21) +        \
+                                        ((rs1) << 21) +        \
                                         ((rd) << 16) +         \
                                         ((rs2) << 11) +        \
                                         ((imm1) << 6) +        \
                                         ((imm2) << 1))
 #define ASM_113(opcode, rd, rs, imm1, imm2, imm3)              \
                                        ((opcode) +             \
-                                        ((rs) << 21) +         \
+                                        ((rs) << 21) +         \
                                         ((rd) << 16) +         \
                                         ((imm1) << 11) +       \
                                         ((imm2) << 6) +        \
index eccf71daa3b55fcfbc8eb7c0dc903c6c94d2db14..6bd53d06cbc5ece45d1814a01a9014d821d2a6af 100644 (file)
@@ -114,7 +114,7 @@ int cpu_post_test_rlwimi (void)
 
                if (ret != 0)
                {
-                   post_log ("Error at rlwimi test %d !\n", i);
+                   post_log ("Error at rlwimi test %d !\n", i);
                }
            }
 
@@ -127,8 +127,8 @@ int cpu_post_test_rlwimi (void)
 
                if (ret != 0)
                {
-                   post_log ("Error at rlwimi test %d !\n", i);
-               }
+                   post_log ("Error at rlwimi test %d !\n", i);
+               }
            }
        }
     }
index 5eaf30b8e77677fa13a5edcb775639b1ebb60c93..35a1a40fc9d68bec8868cd961349183ed90ef524 100644 (file)
@@ -107,7 +107,7 @@ int cpu_post_test_rlwinm (void)
 
                if (ret != 0)
                {
-                   post_log ("Error at rlwinm test %d !\n", i);
+                   post_log ("Error at rlwinm test %d !\n", i);
                }
            }
 
@@ -120,8 +120,8 @@ int cpu_post_test_rlwinm (void)
 
                if (ret != 0)
                {
-                   post_log ("Error at rlwinm test %d !\n", i);
-               }
+                   post_log ("Error at rlwinm test %d !\n", i);
+               }
            }
        }
     }
index 83ee70b52d20e85600e2019fd4d416940c0f4a51..6e828939e0286a8a09386e2590763a6e84dd4b04 100644 (file)
@@ -117,7 +117,7 @@ int cpu_post_test_rlwnm (void)
 
                if (ret != 0)
                {
-                   post_log ("Error at rlwnm test %d !\n", i);
+                   post_log ("Error at rlwnm test %d !\n", i);
                }
            }
 
@@ -130,8 +130,8 @@ int cpu_post_test_rlwnm (void)
 
                if (ret != 0)
                {
-                   post_log ("Error at rlwnm test %d !\n", i);
-               }
+                   post_log ("Error at rlwnm test %d !\n", i);
+               }
            }
        }
     }
index b2760140b52d5f9fe2b9fa59f0a97fc8e16fb0cf..3723e339b9ccb8182723843e8f873b24c47f8027 100644 (file)
@@ -108,7 +108,7 @@ int cpu_post_test_srawi (void)
 
                if (ret != 0)
                {
-                   post_log ("Error at srawi test %d !\n", i);
+                   post_log ("Error at srawi test %d !\n", i);
                }
            }
 
@@ -121,8 +121,8 @@ int cpu_post_test_srawi (void)
 
                if (ret != 0)
                {
-                   post_log ("Error at srawi test %d !\n", i);
-               }
+                   post_log ("Error at srawi test %d !\n", i);
+               }
            }
        }
     }
index f7317dded09deea306af238553cc406af03670f0..c3e7f681ab100fd3d00f6a037edc44619253b4e1 100644 (file)
@@ -211,7 +211,7 @@ int cpu_post_test_three (void)
 
                if (ret != 0)
                {
-                   post_log ("Error at three test %d !\n", i);
+                   post_log ("Error at three test %d !\n", i);
                }
            }
 
@@ -224,8 +224,8 @@ int cpu_post_test_three (void)
 
                if (ret != 0)
                {
-                   post_log ("Error at three test %d !\n", i);
-               }
+                   post_log ("Error at three test %d !\n", i);
+               }
            }
        }
     }
index f6d90525325ec3f5f6a3cf10f9ac3a2511a415ad..1d40e1af33c4932ea1a379ba584b81168d9098f5 100644 (file)
@@ -103,7 +103,7 @@ int cpu_post_test_threei (void)
 
            if (ret != 0)
            {
-               post_log ("Error at threei test %d !\n", i);
+               post_log ("Error at threei test %d !\n", i);
            }
        }
     }
index 906fefd0d353ce1d6537f078bd215e3f265699ec..ce1edf89db5a9394bf955f170f2ecbd45b5be886 100644 (file)
@@ -181,7 +181,7 @@ int cpu_post_test_threex (void)
 
                if (ret != 0)
                {
-                   post_log ("Error at threex test %d !\n", i);
+                   post_log ("Error at threex test %d !\n", i);
                }
            }
 
@@ -194,8 +194,8 @@ int cpu_post_test_threex (void)
 
                if (ret != 0)
                {
-                   post_log ("Error at threex test %d !\n", i);
-               }
+                   post_log ("Error at threex test %d !\n", i);
+               }
            }
        }
     }
index 3a9b13684fa6873e5f81300a7017d8e1174ba78f..9549dbb750b8897426f25f1c72a31063a17db2ab 100644 (file)
@@ -128,7 +128,7 @@ int cpu_post_test_twox (void)
 
                if (ret != 0)
                {
-                   post_log ("Error at twox test %d !\n", i);
+                   post_log ("Error at twox test %d !\n", i);
                }
            }
 
@@ -141,8 +141,8 @@ int cpu_post_test_twox (void)
 
                if (ret != 0)
                {
-                   post_log ("Error at twox test %d !\n", i);
-               }
+                   post_log ("Error at twox test %d !\n", i);
+               }
            }
        }
     }
index 8834d5e8ab3433830c073b56488c416807af43e4..139ea019f24b4bb06a9effb0d01e6700f416a6a0 100644 (file)
@@ -127,8 +127,8 @@ static int uncompress_using_gzip(void *in, unsigned long in_size,
 }
 
 static int compress_using_bzip2(void *in, unsigned long in_size,
-                               void *out, unsigned long out_max,
-                               unsigned long *out_size)
+                               void *out, unsigned long out_max,
+                               unsigned long *out_size)
 {
        /* There is no bzip2 compression in u-boot, so fake it. */
        assert(in_size == strlen(plain));
index c36cde200745b0da9959d280606ca76ccd498798..ca76f947e5d323830f2573085b0d3120be88df8e 100644 (file)
@@ -162,7 +162,7 @@ HOSTCPPFLAGS =      -include $(SRCTREE)/include/libfdt_env.h \
                -idirafter $(SRCTREE)/include \
                -idirafter $(OBJTREE)/include2 \
                -idirafter $(OBJTREE)/include \
-               -I $(SRCTREE)/lib/libfdt \
+               -I $(SRCTREE)/lib/libfdt \
                -I $(SRCTREE)/tools \
                -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
                -DUSE_HOSTCC \
index 39605abe12369bcd528e5f5bd8549e9061966ac7..0b50602823d778701f858fa0f5ba0402a5a648f8 100644 (file)
@@ -60,7 +60,7 @@
        // CPU types
        $cputyp_vals = array('','MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)','MPC8560');
 
-       // CPU/BUS/CPM clock speeds
+       // CPU/BUS/CPM clock speeds 
        $clk_vals = array('','33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ');
 
        // sdram sizes (nbits array is for eeprom config file)
        function enum_to_index($name, $vals) {
                $index = array_search($GLOBALS[$name], $vals);
                if ($vals[0] != '')
-                       $index++;
+                       $index++;
                return $index;
        }
 
index a0601e10c5147f6abe4e81b88c9bcd0492386af2..0fcdba27d46892aeb801f86558504bdd49e56a68 100755 (executable)
@@ -3,11 +3,11 @@
 # This script converts binary files (u-boot.bin) into so called
 # bootstrap records that are accepted by Motorola's MC9328MX1/L
 # (a.k.a. DragaonBall i.MX) in "Bootstrap Mode"
-#
+# 
 # The code for the SynchFlash programming routines is taken from
 # Bootloader\Bin\SyncFlash\programBoot_b.txt contained in
-# Motorolas LINUX_BSP_0_3_8.tar.gz
-#
+# Motorolas LINUX_BSP_0_3_8.tar.gz 
+# 
 # The script could easily extended for AMD flash routines.
 #
 # 2004-06-23   -       steven.scholz@imc-berlin.de
 #################################################################################
 # From the posting to the U-Boot-Users mailing list, 23 Jun 2004:
 # ===============================================================
-# I just hacked a simple script that converts u-boot.bin into a text file
-# containg processor init code, SynchFlash programming code and U-Boot data in
+# I just hacked a simple script that converts u-boot.bin into a text file 
+# containg processor init code, SynchFlash programming code and U-Boot data in 
 # form of so called b-records.
-#
-# This can be used to programm U-Boot into (Synch)Flash using the Bootstrap
+# 
+# This can be used to programm U-Boot into (Synch)Flash using the Bootstrap 
 # Mode of the MC9328MX1/L
-#
+# 
 # 0AFE1F3410202E2E2E000000002073756363656564/
 # 0AFE1F44102E0A0000206661696C656420210A0000/
 # 0AFE100000
 # ...
 # MX1ADS Sync-flash Programming Utility v0.5 2002/08/21
-#
+# 
 # Source address (stored in 0x0AFE0000): 0x0A000000
 # Target address (stored in 0x0AFE0004): 0x0C000000
 # Size           (stored in 0x0AFE0008): 0x0001A320
-#
+# 
 # Press any key to start programming ...
 # Erasing ...
 # Blank checking ...
 # Programming ...
 # Verifying flash ... succeed.
-#
+# 
 # Programming finished.
-#
+# 
 # So no need for a BDI2000 anymore... ;-)
-#
-# This is working on my MX1ADS eval board. Hope this could be useful for
+# 
+# This is working on my MX1ADS eval board. Hope this could be useful for 
 # someone.
 #################################################################################
 
index 1be1edb16a84b82504c1e4609be0e4fddf854e53..e371983275433f8a1cc155701dd8836c7aca96ca 100644 (file)
@@ -39,7 +39,7 @@ LIBFDT_OBJS   := $(addprefix $(obj),$(LIBFDT_OBJ_FILES-y))
 HOSTCPPFLAGS  = -idirafter $(SRCTREE)/include \
                -idirafter $(OBJTREE)/include2 \
                -idirafter $(OBJTREE)/include \
-               -I $(SRCTREE)/lib/libfdt \
+               -I $(SRCTREE)/lib/libfdt \
                -I $(SRCTREE)/tools \
                -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES
 
index d4fc42e4cc6286c4e153610738ddef062e2ae46b..a9b49c59a0cc347884bb76cec5e6c25bc72cc71e 100644 (file)
@@ -153,7 +153,7 @@ int symfilecnt = 0;
 static void add_new_symbol(struct symfile *sym, char * symname)
 {
        sym->symbollist =
-          realloc(sym->symbollist, (sym->symbolcnt + 1) * sizeof(char *));
+         realloc(sym->symbollist, (sym->symbolcnt + 1) * sizeof(char *));
        sym->symbollist[sym->symbolcnt++].name = strdup(symname);
 }
 
@@ -214,7 +214,7 @@ static void find_export_symbols(char * filename)
                        char *p;
                        char *e;
                        if (((p = strstr(line, "EXPORT_SYMBOL_GPL")) != NULL) ||
-                            ((p = strstr(line, "EXPORT_SYMBOL")) != NULL)) {
+                           ((p = strstr(line, "EXPORT_SYMBOL")) != NULL)) {
                                /* Skip EXPORT_SYMBOL{_GPL} */
                                while (isalnum(*p) || *p == '_')
                                        p++;
@@ -290,24 +290,24 @@ static void extfunc(char * filename) { docfunctions(filename, FUNCTION);   }
 static void singfunc(char * filename, char * line)
 {
        char *vec[200]; /* Enough for specific functions */
-        int i, idx = 0;
-        int startofsym = 1;
+       int i, idx = 0;
+       int startofsym = 1;
        vec[idx++] = KERNELDOC;
        vec[idx++] = DOCBOOK;
 
-        /* Split line up in individual parameters preceded by FUNCTION */
-        for (i=0; line[i]; i++) {
-                if (isspace(line[i])) {
-                        line[i] = '\0';
-                        startofsym = 1;
-                        continue;
-                }
-                if (startofsym) {
-                        startofsym = 0;
-                        vec[idx++] = FUNCTION;
-                        vec[idx++] = &line[i];
-                }
-        }
+       /* Split line up in individual parameters preceded by FUNCTION */
+       for (i=0; line[i]; i++) {
+               if (isspace(line[i])) {
+                       line[i] = '\0';
+                       startofsym = 1;
+                       continue;
+               }
+               if (startofsym) {
+                       startofsym = 0;
+                       vec[idx++] = FUNCTION;
+                       vec[idx++] = &line[i];
+               }
+       }
        for (i = 0; i < idx; i++) {
                if (strcmp(vec[i], FUNCTION))
                        continue;
@@ -456,14 +456,14 @@ static void parse_file(FILE *infile)
                                        break;
                                case 'D':
                                        while (*s && !isspace(*s)) s++;
-                                        *s = '\0';
-                                        symbolsonly(line+2);
-                                        break;
+                                       *s = '\0';
+                                       symbolsonly(line+2);
+                                       break;
                                case 'F':
                                        /* filename */
                                        while (*s && !isspace(*s)) s++;
                                        *s++ = '\0';
-                                        /* function names */
+                                       /* function names */
                                        while (isspace(*s))
                                                s++;
                                        singlefunctions(line +2, s);
@@ -511,11 +511,11 @@ int main(int argc, char *argv[])
        }
        /* Open file, exit on error */
        infile = fopen(argv[2], "r");
-        if (infile == NULL) {
-                fprintf(stderr, "docproc: ");
-                perror(argv[2]);
-                exit(2);
-        }
+       if (infile == NULL) {
+               fprintf(stderr, "docproc: ");
+               perror(argv[2]);
+               exit(2);
+       }
 
        if (strcmp("doc", argv[1]) == 0) {
                /* Need to do this in two passes.
index 6347418904811d60c3ba316653c2d931a3baea7b..cbbf34c27cfa11abbbe81fa4b889459a7b9ebc38 100755 (executable)
@@ -432,7 +432,7 @@ sub dump_doc_section {
     my $contents = join "\n", @_;
 
     if ($no_doc_sections) {
-        return;
+       return;
     }
 
     if (($function_only == 0) ||
index 7e038905c2c84a607119e3f74b117428d83c3b77..61306d0235da5b23d6f3ec07e4a417a178f09d37 100755 (executable)
@@ -49,7 +49,7 @@ try:
                ["ignore-case","default","split="])
 except getopt.GetoptError as err:
        print str(err) # will print something like "option -a not recognized"
-        sys.exit(2)
+       sys.exit(2)
 
 for o, a in opts:
        if o in ("-s", "--split"):
index c68697631b5bd80d01c59c62e90e3e01ff4f284f..4c33756d66e6d637dffe817c6fc1b59099eea6c1 100755 (executable)
@@ -22,6 +22,6 @@ SED_CMD="/^->/{s:->#\(.*\):/* \1 */:; \
  echo " *"
  echo " */"
  echo ""
- sed -ne "${SED_CMD}" $1
+ sed -ne "${SED_CMD}" $1 
  echo ""
  echo "#endif" ) > $2
index c003f9ad19f1c648e710d89e9d98d0950398f965..1041588d0b037aa7bdd5909644d352c5b20bab25 100644 (file)
@@ -63,10 +63,10 @@ int main (int argc, char **argv)
                sha1_csum ((unsigned char *) data, len, (unsigned char *)output);
 
                printf ("U-Boot sum:\n");
-               for (i = 0; i < 20 ; i++) {
-                   printf ("%02X ", output[i]);
-               }
-               printf ("\n");
+               for (i = 0; i < 20 ; i++) {
+                   printf ("%02X ", output[i]);
+               }
+               printf ("\n");
                /* overwrite the sum in the bin file, with the actual */
                lseek (ifd, SHA1_SUM_POS, SEEK_END);
                if (write (ifd, output, SHA1_SUM_LEN) != SHA1_SUM_LEN) {