imx8mm: Load fuse for TMU TCALIV and TASR

On iMX8MM, the default value of TMU registers TCALIV and TASR need
be loaded from fuse. HW won't do this, it expect SW loads them before
using TMU.

Reviewed-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index 89229da3b62ac131a651711164a3178b40f11e11..dcec83e62488852d050be5a1430b73fd84c4ef94 100644 (file)
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
 // SPDX-License-Identifier: GPL-2.0+
 /*

- * Copyright 2017 NXP
+ * Copyright 2017-2019 NXP

  *
  * Peng Fan <peng.fan@nxp.com>
  */
  *
  * Peng Fan <peng.fan@nxp.com>
  */


@@ -448,3 +448,29 @@ int arch_misc_init(void)
        return 0;
 }
 #endif
        return 0;
 }
 #endif

+
+void imx_tmu_arch_init(void *reg_base)
+{
+       if (is_imx8mm()) {
+               /* Load TCALIV and TASR from fuses */
+               struct ocotp_regs *ocotp =
+                       (struct ocotp_regs *)OCOTP_BASE_ADDR;
+               struct fuse_bank *bank = &ocotp->bank[3];
+               struct fuse_bank3_regs *fuse =
+                       (struct fuse_bank3_regs *)bank->fuse_regs;
+
+               u32 tca_rt, tca_hr, tca_en;
+               u32 buf_vref, buf_slope;
+
+               tca_rt = fuse->ana0 & 0xFF;
+               tca_hr = (fuse->ana0 & 0xFF00) >> 8;
+               tca_en = (fuse->ana0 & 0x2000000) >> 25;
+
+               buf_vref = (fuse->ana0 & 0x1F00000) >> 20;
+               buf_slope = (fuse->ana0 & 0xF0000) >> 16;
+
+               writel(buf_vref | (buf_slope << 16), (ulong)reg_base + 0x28);
+               writel((tca_en << 31) | (tca_hr << 16) | tca_rt,
+                      (ulong)reg_base + 0x30);
+       }
+}