apalis_imx6: switch to zimage
authorMarcel Ziswiler <marcel.ziswiler@toradex.com>
Fri, 8 Feb 2019 17:12:25 +0000 (18:12 +0100)
committerStefano Babic <sbabic@denx.de>
Sat, 13 Apr 2019 18:30:08 +0000 (20:30 +0200)
Switch to the generic compressed Kernel image type (zImage) instead of
the U-Boot specific uImage format.

While at it also fix device tree naming for MMC DFU.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
include/configs/apalis_imx6.h

index a49b08ba454f31fe532ea25cdffaf1adf483d52f..c8aa1bdddf9af270d3d3d67cf69c24613f9e4053 100644 (file)
 #include <config_distro_bootcmd.h>
 #undef BOOTENV_RUN_NET_USB_START
 #define BOOTENV_RUN_NET_USB_START ""
-#else
+#else /* CONFIG_SPL_BUILD */
 #define BOOTENV
-#endif
+#endif /* CONFIG_SPL_BUILD */
 
 #define DFU_ALT_EMMC_INFO \
        "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
        "boot part 0 1;" \
        "rootfs part 0 2;" \
-       "uImage fat 0 1;" \
-       "imx6q-colibri-eval-v3.dtb fat 0 1;" \
-       "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
+       "zImage fat 0 1;" \
+       "imx6q-apalis-eval.dtb fat 0 1;" \
+       "imx6q-apalis-cam-eval.dtb fat 0 1"
 
 #define EMMC_BOOTCMD \
        "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext4 " \
                "${vidargs}; echo Booting from internal eMMC chip...; " \
                "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
                "${boot_file} && run fdt_fixup && " \
-               "bootm ${kernel_addr_r} ${dtbparam}\0" \
+               "bootz ${kernel_addr_r} ${dtbparam}\0" \
        "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 
                "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
                "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
                "run nfsdtbload; dhcp ${kernel_addr_r} " \
-               "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
+               "&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \
        "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
                "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 
-#define SD_BOOTCMD                                             \
+#define SD_BOOTCMD \
        "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext4 " \
                "rootwait\0" \
        "sdboot=run setup; " \
                "${vidargs}; echo Booting from SD card; " \
                "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
                "${boot_file} && run fdt_fixup && " \
-               "bootm ${kernel_addr_r} ${dtbparam}\0" \
+               "bootz ${kernel_addr_r} ${dtbparam}\0" \
        "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 
                "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
                "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
                "${boot_file} && run fdt_fixup && " \
-               "bootm ${kernel_addr_r} ${dtbparam}\0" \
+               "bootz ${kernel_addr_r} ${dtbparam}\0" \
        "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
                "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 
                "run distro_bootcmd ; " \
                "usb start ; " \
                "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
-       "boot_file=uImage\0" \
+       "boot_file=zImage\0" \
        "console=ttymxc0\0" \
        "defargs=enable_wait_mode=off vmalloc=400M\0" \
        "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \