mpc5200, digsy_mtc: add support for rev5 board version
authorHeiko Schocher <hs@denx.de>
Thu, 13 Jan 2011 07:25:00 +0000 (08:25 +0100)
committerWolfgang Denk <wd@denx.de>
Tue, 18 Jan 2011 22:34:26 +0000 (23:34 +0100)
difference to previous board version:
- M29W128GH flash from Numonyx
- SDRAM ISSI IS45S16800 (Option A2 105°C)
- rev5 uses RTC RV-3029-C2
- update cs0 and cs1 baseaddr and length
  depending on the detected flash size.
- added Werner Pfister <Pfister_Werner@intercontrol.de>
  as maintainer for the digsy board variants
- As the M29W128GH needs a special flash_cmd_reset()
  document that in the new file doc/README.cfi.
- move "#endif /* CONFIG_CMD_IDE */" to the right place
- remove LOWBOOT config option for digsy_mtc and digsy_mtc_rev5
  boards
- change doc/README.cfi as Stefan Roese suggested

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
cc: Wolfgang Denk <hs@denx.de>
cc: Stefan Roese <sr@denx.de>
cc: Werner Pfister <Pfister_Werner@intercontrol.de>
cc: Detlev Zundel <dzu@denx.de>

MAINTAINERS
board/digsy_mtc/digsy_mtc.c
board/digsy_mtc/is45s16800a2.h [new file with mode: 0644]
boards.cfg
doc/README.cfi [new file with mode: 0644]
include/configs/digsy_mtc.h

index a6e8a7fe79fb94871a3dee439f0229f4189781f1..edd1c5cd2a2630c01eb20399b8d29fadf8f713f4 100644 (file)
@@ -339,6 +339,10 @@ Denis Peter <d.peter@mpl.ch>
        MIP405          PPC4xx
        PIP405          PPC4xx
 
+Werner Pfister <Pfister_Werner@intercontrol.de>
+       digsy_mtc       mpc5200
+       digsy_mtc_rev5  mpc5200
+
 Kim Phillips <kim.phillips@freescale.com>
 
        MPC8349EMDS     MPC8349
index cc6087b339598d916dfd378f6daf8760f6d15fd4..afb09480571406ebb9b5c7a322d3422640dd0225 100644 (file)
 #include <asm/processor.h>
 #include <asm/io.h>
 #include "eeprom.h"
+#if defined(CONFIG_DIGSY_REV5)
+#include "is45s16800a2.h"
+#include <mtd/cfi_flash.h>
+#else
 #include "is42s16800a-7t.h"
+#endif
+#include <libfdt.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
 extern int usb_cpu_init(void);
 
+#if defined(CONFIG_DIGSY_REV5)
+/*
+ * The M29W128GH needs a specail reset command function,
+ * details see the doc/README.cfi file
+ */
+void flash_cmd_reset(flash_info_t *info)
+{
+       flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+}
+#endif
+
 #ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start(int hi_addr)
 {
@@ -175,6 +192,9 @@ int checkboard(void)
        char *s = getenv("serial#");
 
        puts ("Board: InterControl digsyMTC");
+#if defined(CONFIG_DIGSY_REV5)
+       puts (" rev5");
+#endif
        if (s != NULL) {
                puts(", ");
                puts(s);
@@ -305,12 +325,97 @@ void ide_set_reset(int idereset)
        setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25));
 }
 #endif /* CONFIG_IDE_RESET */
+#endif /* CONFIG_CMD_IDE */
 
 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+static void ft_delete_node(void *fdt, const char *compat)
+{
+       int off = -1;
+       int ret;
+
+       off = fdt_node_offset_by_compatible(fdt, -1, compat);
+       if (off < 0) {
+               printf("Could not find %s node.\n", compat);
+               return;
+       }
+
+       ret = fdt_del_node(fdt, off);
+       if (ret < 0)
+               printf("Could not delete %s node.\n", compat);
+}
+#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
+static void ft_adapt_flash_base(void *blob)
+{
+       flash_info_t    *dev = &flash_info[0];
+       int off;
+       struct fdt_property *prop;
+       int len;
+       u32 *reg, *reg2;
+
+       off = fdt_node_offset_by_compatible(blob, -1, "fsl,mpc5200b-lpb");
+       if (off < 0) {
+               printf("Could not find fsl,mpc5200b-lpb node.\n");
+               return;
+       }
+
+       /* found compatible property */
+       prop = fdt_get_property_w(blob, off, "ranges", &len);
+       if (prop) {
+               reg = reg2 = (u32 *)&prop->data[0];
+
+               reg[2] = dev->start[0];
+               reg[3] = dev->size;
+               fdt_setprop(blob, off, "ranges", reg2, len);
+       } else
+               printf("Could not find ranges\n");
+}
+
+extern ulong flash_get_size (phys_addr_t base, int banknum);
+
+/* Update the Flash Baseaddr settings */
+int update_flash_size (int flash_size)
+{
+       volatile struct mpc5xxx_mmap_ctl *mm =
+               (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR;
+       flash_info_t    *dev;
+       int     i;
+       int size = 0;
+       unsigned long base = 0x0;
+       u32 *cs_reg = (u32 *)&mm->cs0_start;
+
+       for (i = 0; i < 2; i++) {
+               dev = &flash_info[i];
+
+               if (dev->size) {
+                       /* calculate new base addr for this chipselect */
+                       base -= dev->size;
+                       out_be32(cs_reg, START_REG(base));
+                       cs_reg++;
+                       out_be32(cs_reg, STOP_REG(base, dev->size));
+                       cs_reg++;
+                       /* recalculate the sectoraddr in the cfi driver */
+                       size += flash_get_size(base, i);
+               }
+       }
+       gd->bd->bi_flashstart = base;
+       return 0;
+}
+#endif /* defined(CONFIG_SYS_UPDATE_FLASH_SIZE) */
+
 void ft_board_setup(void *blob, bd_t *bd)
 {
        ft_cpu_setup(blob, bd);
+       /*
+        * There are 2 RTC nodes in the DTS, so remove
+        * the unneeded node here.
+        */
+#if defined(CONFIG_DIGSY_REV5)
+       ft_delete_node(blob, "dallas,ds1339");
+#else
+       ft_delete_node(blob, "mc,rv3029c2");
+#endif
+#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
+       ft_adapt_flash_base(blob);
+#endif
 }
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
-
-#endif /* CONFIG_CMD_IDE */
diff --git a/board/digsy_mtc/is45s16800a2.h b/board/digsy_mtc/is45s16800a2.h
new file mode 100644 (file)
index 0000000..6ab5c12
--- /dev/null
@@ -0,0 +1,31 @@
+/*
+ * (C) Copyright 2010
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * based on:
+ * (C) Copyright 2004-2009
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_MODE     0x00CD0000
+#define SDRAM_CONTROL  0x50470000
+#define SDRAM_CONFIG1  0xD2322900
+#define SDRAM_CONFIG2  0x8AD70000
index 54ed0f786f98b350fedf435639232c3d736f1691..054bfc7e70e4cd9bf0e342a24f1fe6bca3df45ac 100644 (file)
@@ -239,8 +239,9 @@ BC3450                       powerpc     mpc5xxx     bc3450
 canmb                        powerpc     mpc5xxx
 cm5200                       powerpc     mpc5xxx
 digsy_mtc                    powerpc     mpc5xxx     digsy_mtc
-digsy_mtc_LOWBOOT            powerpc     mpc5xxx     digsy_mtc           -              -           digsy_mtc:SYS_TEXT_BASE=0xFF000000
 digsy_mtc_RAMBOOT            powerpc     mpc5xxx     digsy_mtc           -              -           digsy_mtc:SYS_TEXT_BASE=0x00100000
+digsy_mtc_rev5               powerpc     mpc5xxx     digsy_mtc           -              -           digsy_mtc:DIGSY_REV5
+digsy_mtc_rev5_RAMBOOT       powerpc     mpc5xxx     digsy_mtc           -              -           digsy_mtc:SYS_TEXT_BASE=0x00100000,DIGSY_REV5
 galaxy5200                   powerpc     mpc5xxx     galaxy5200          -              -           galaxy5200:galaxy5200
 galaxy5200_LOWBOOT           powerpc     mpc5xxx     galaxy5200          -              -           galaxy5200:galaxy5200_LOWBOOT
 icecube_5200                 powerpc     mpc5xxx     icecube             -              -           IceCube
diff --git a/doc/README.cfi b/doc/README.cfi
new file mode 100644 (file)
index 0000000..d087ff0
--- /dev/null
@@ -0,0 +1,29 @@
+The common CFI driver provides this weak default implementation for
+flash_cmd_reset():
+
+void __flash_cmd_reset(flash_info_t *info)
+{
+       /*
+        * We do not yet know what kind of commandset to use, so we issue
+        * the reset command in both Intel and AMD variants, in the hope
+        * that AMD flash roms ignore the Intel command.
+        */
+       flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+       flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+}
+void flash_cmd_reset(flash_info_t *info)
+       __attribute__((weak,alias("__flash_cmd_reset")));
+
+
+Some flash chips seems to have trouble with this reset sequence. In this case
+the board specific code can override this weak default version with a board
+specific function. For example the digsy_mtc board equipped with the M29W128GH
+from Numonyx needs this version to function properly:
+
+void flash_cmd_reset(flash_info_t *info)
+{
+       flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+}
+
+see also:
+http://www.mail-archive.com/u-boot@lists.denx.de/msg24368.html
index d541160bd39b153f2f48c95bdddada6b061cf98c..bfbec6a8603f65a659a7358a81578332fc13eadd 100644 (file)
 /*
  * RTC configuration
  */
+#if defined(CONFIG_DIGSY_REV5)
+#define CONFIG_SYS_I2C_RTC_ADDR        0x56
+#define CONFIG_RTC_RV3029
+#else
 #define CONFIG_RTC_DS1337
 #define CONFIG_SYS_I2C_RTC_ADDR        0x68
 #define CONFIG_SYS_DS1339_TCR_VAL      0xAB    /* diode + 4k resistor */
+#endif
 
 /*
  * Flash configuration
 #define        CONFIG_SYS_FLASH_CFI            1
 #define        CONFIG_FLASH_CFI_DRIVER 1
 
+#if defined(CONFIG_DIGSY_REV5)
+#define CONFIG_SYS_FLASH_BASE          0xFE000000
+#define CONFIG_SYS_FLASH_BASE_CS1      0xFC000000
+#define CONFIG_SYS_MAX_FLASH_BANKS     2
+#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE_CS1, \
+                                       CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_UPDATE_FLASH_SIZE
+#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
+#else
 #define CONFIG_SYS_FLASH_BASE          0xFF000000
-#define CONFIG_SYS_FLASH_SIZE  0x01000000
-
 #define CONFIG_SYS_MAX_FLASH_BANKS     1
+#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
+#endif
+
 #define CONFIG_SYS_MAX_FLASH_SECT      256
 #define CONFIG_FLASH_16BIT
 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_SIZE  0x01000000
 #define CONFIG_SYS_FLASH_ERASE_TOUT    240000
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500
 
 #define CONFIG_SYS_CS0_SIZE            CONFIG_SYS_FLASH_SIZE
 #define CONFIG_SYS_CS0_CFG             0x0002DD00
 
+#if defined(CONFIG_DIGSY_REV5)
+#define CONFIG_SYS_CS1_START           CONFIG_SYS_FLASH_BASE_CS1
+#define CONFIG_SYS_CS1_SIZE            CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_CS1_CFG             0x0002DD00
+#endif
+
 #define CONFIG_SYS_CS_BURST            0x00000000
 #define CONFIG_SYS_CS_DEADCYCLE        0x11111111