source "arch/arm/cpu/armv7/omap5/Kconfig"
-source "arch/arm/cpu/arm926ejs/orion5x/Kconfig"
+source "arch/arm/mach-orion5x/Kconfig"
source "arch/arm/cpu/armv7/rmobile/Kconfig"
machine-$(CONFIG_KIRKWOOD) += kirkwood
# TODO: rename CONFIG_TEGRA -> CONFIG_ARCH_TEGRA
machine-$(CONFIG_ARCH_NOMADIK) += nomadik
+# TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X
+machine-$(CONFIG_ORION5X) += orion5x
machine-$(CONFIG_TEGRA) += tegra
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
obj-$(CONFIG_MX25) += mx25/
obj-$(CONFIG_MX27) += mx27/
obj-$(if $(filter mxs,$(SOC)),y) += mxs/
-obj-$(CONFIG_ORION5X) += orion5x/
obj-$(CONFIG_PANTHEON) += pantheon/
obj-$(if $(filter spear,$(SOC)),y) += spear/
obj-$(CONFIG_ARCH_VERSATILE) += versatile/
+++ /dev/null
-if ORION5X
-
-choice
- prompt "Marvell Orion board select"
-
-config TARGET_EDMINIV2
- bool "LaCie Ethernet Disk mini V2"
-
-endchoice
-
-config SYS_SOC
- default "orion5x"
-
-source "board/LaCie/edminiv2/Kconfig"
-
-endif
+++ /dev/null
-#
-# Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
-#
-# Based on original Kirkwood support which is
-# (C) Copyright 2009
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = cpu.o
-obj-y += dram.o
-obj-y += timer.o
-
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-obj-y += lowlevel_init.o
-endif
+++ /dev/null
-/*
- * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
- *
- * Based on original Kirkwood support which is
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <u-boot/md5.h>
-#include <asm/arch/cpu.h>
-
-#define BUFLEN 16
-
-void reset_cpu(unsigned long ignored)
-{
- struct orion5x_cpu_registers *cpureg =
- (struct orion5x_cpu_registers *)ORION5X_CPU_REG_BASE;
-
- writel(readl(&cpureg->rstoutn_mask) | (1 << 2),
- &cpureg->rstoutn_mask);
- writel(readl(&cpureg->sys_soft_rst) | 1,
- &cpureg->sys_soft_rst);
- while (1)
- ;
-}
-
-/*
- * Compute Window Size field value from size expressed in bytes
- * Used with the Base register to set the address window size and location.
- * Must be programmed from LSB to MSB as sequence of ones followed by
- * sequence of zeros. The number of ones specifies the size of the window in
- * 64 KiB granularity (e.g., a value of 0x00FF specifies 256 = 16 MiB).
- * NOTES:
- * 1) A sizeval equal to 0x0 specifies 4 GiB.
- * 2) A return value of 0x0 specifies 64 KiB.
- */
-unsigned int orion5x_winctrl_calcsize(unsigned int sizeval)
-{
- /*
- * Calculate the number of 64 KiB blocks needed minus one (rounding up).
- * For sizeval > 0 this is equivalent to:
- * sizeval = (u32) ceil((double) sizeval / 65536.0) - 1
- */
- sizeval = (sizeval - 1) >> 16;
-
- /*
- * Propagate 'one' bits to the right by 'oring' them.
- * We need only treat bits 15-0.
- */
- sizeval |= sizeval >> 1; /* 'Or' bit 15 onto bit 14 */
- sizeval |= sizeval >> 2; /* 'Or' bits 15-14 onto bits 13-12 */
- sizeval |= sizeval >> 4; /* 'Or' bits 15-12 onto bits 11-8 */
- sizeval |= sizeval >> 8; /* 'Or' bits 15-8 onto bits 7-0*/
-
- return sizeval;
-}
-
-/*
- * orion5x_config_adr_windows - Configure address Windows
- *
- * There are 8 address windows supported by Orion5x Soc to addess different
- * devices. Each window can be configured for size, BAR and remap addr
- * Below configuration is standard for most of the cases
- *
- * If remap function not used, remap_lo must be set as base
- *
- * NOTES:
- *
- * 1) in order to avoid windows with inconsistent control and base values
- * (which could prevent access to BOOTCS and hence execution from FLASH)
- * always disable window before writing the base value then reenable it
- * by writing the control value.
- *
- * 2) in order to avoid losing access to BOOTCS when disabling window 7,
- * first configure window 6 for BOOTCS, then configure window 7 for BOOTCS,
- * then configure windows 6 for its own target.
- *
- * Reference Documentation:
- * Mbus-L to Mbus Bridge Registers Configuration.
- * (Sec 25.1 and 25.3 of Datasheet)
- */
-int orion5x_config_adr_windows(void)
-{
- struct orion5x_win_registers *winregs =
- (struct orion5x_win_registers *)ORION5X_CPU_WIN_BASE;
-
-/* Disable window 0, configure it for its intended target, enable it. */
- writel(0, &winregs[0].ctrl);
- writel(ORION5X_ADR_PCIE_MEM, &winregs[0].base);
- writel(ORION5X_ADR_PCIE_MEM_REMAP_LO, &winregs[0].remap_lo);
- writel(ORION5X_ADR_PCIE_MEM_REMAP_HI, &winregs[0].remap_hi);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_MEM,
- ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_MEM,
- ORION5X_WIN_ENABLE), &winregs[0].ctrl);
-/* Disable window 1, configure it for its intended target, enable it. */
- writel(0, &winregs[1].ctrl);
- writel(ORION5X_ADR_PCIE_IO, &winregs[1].base);
- writel(ORION5X_ADR_PCIE_IO_REMAP_LO, &winregs[1].remap_lo);
- writel(ORION5X_ADR_PCIE_IO_REMAP_HI, &winregs[1].remap_hi);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_IO,
- ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_IO,
- ORION5X_WIN_ENABLE), &winregs[1].ctrl);
-/* Disable window 2, configure it for its intended target, enable it. */
- writel(0, &winregs[2].ctrl);
- writel(ORION5X_ADR_PCI_MEM, &winregs[2].base);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCI_MEM,
- ORION5X_TARGET_PCI, ORION5X_ATTR_PCI_MEM,
- ORION5X_WIN_ENABLE), &winregs[2].ctrl);
-/* Disable window 3, configure it for its intended target, enable it. */
- writel(0, &winregs[3].ctrl);
- writel(ORION5X_ADR_PCI_IO, &winregs[3].base);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCI_IO,
- ORION5X_TARGET_PCI, ORION5X_ATTR_PCI_IO,
- ORION5X_WIN_ENABLE), &winregs[3].ctrl);
-/* Disable window 4, configure it for its intended target, enable it. */
- writel(0, &winregs[4].ctrl);
- writel(ORION5X_ADR_DEV_CS0, &winregs[4].base);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS0,
- ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS0,
- ORION5X_WIN_ENABLE), &winregs[4].ctrl);
-/* Disable window 5, configure it for its intended target, enable it. */
- writel(0, &winregs[5].ctrl);
- writel(ORION5X_ADR_DEV_CS1, &winregs[5].base);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS1,
- ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS1,
- ORION5X_WIN_ENABLE), &winregs[5].ctrl);
-/* Disable window 6, configure it for FLASH, enable it. */
- writel(0, &winregs[6].ctrl);
- writel(ORION5X_ADR_BOOTROM, &winregs[6].base);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM,
- ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM,
- ORION5X_WIN_ENABLE), &winregs[6].ctrl);
-/* Disable window 7, configure it for FLASH, enable it. */
- writel(0, &winregs[7].ctrl);
- writel(ORION5X_ADR_BOOTROM, &winregs[7].base);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM,
- ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM,
- ORION5X_WIN_ENABLE), &winregs[7].ctrl);
-/* Disable window 6, configure it for its intended target, enable it. */
- writel(0, &winregs[6].ctrl);
- writel(ORION5X_ADR_DEV_CS2, &winregs[6].base);
- writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS2,
- ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS2,
- ORION5X_WIN_ENABLE), &winregs[6].ctrl);
-
- return 0;
-}
-
-/*
- * Orion5x identification is done through PCIE space.
- */
-
-u32 orion5x_device_id(void)
-{
- return readl(PCIE_DEV_ID_OFF) >> 16;
-}
-
-u32 orion5x_device_rev(void)
-{
- return readl(PCIE_DEV_REV_OFF) & 0xff;
-}
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-
-/* Display device and revision IDs.
- * This function must cover all known device/revision
- * combinations, not only the one for which u-boot is
- * compiled; this way, one can identify actual HW in
- * case of a mismatch.
- */
-int print_cpuinfo(void)
-{
- char dev_str[7]; /* room enough for 0x0000 plus null byte */
- char rev_str[5]; /* room enough for 0x00 plus null byte */
- char *dev_name = NULL;
- char *rev_name = NULL;
-
- u32 dev = orion5x_device_id();
- u32 rev = orion5x_device_rev();
-
- if (dev == MV88F5181_DEV_ID) {
- dev_name = "MV88F5181";
- if (rev == MV88F5181_REV_B1)
- rev_name = "B1";
- else if (rev == MV88F5181L_REV_A1) {
- dev_name = "MV88F5181L";
- rev_name = "A1";
- } else if (rev == MV88F5181L_REV_A0) {
- dev_name = "MV88F5181L";
- rev_name = "A0";
- }
- } else if (dev == MV88F5182_DEV_ID) {
- dev_name = "MV88F5182";
- if (rev == MV88F5182_REV_A2)
- rev_name = "A2";
- } else if (dev == MV88F5281_DEV_ID) {
- dev_name = "MV88F5281";
- if (rev == MV88F5281_REV_D2)
- rev_name = "D2";
- else if (rev == MV88F5281_REV_D1)
- rev_name = "D1";
- else if (rev == MV88F5281_REV_D0)
- rev_name = "D0";
- } else if (dev == MV88F6183_DEV_ID) {
- dev_name = "MV88F6183";
- if (rev == MV88F6183_REV_B0)
- rev_name = "B0";
- }
- if (dev_name == NULL) {
- sprintf(dev_str, "0x%04x", dev);
- dev_name = dev_str;
- }
- if (rev_name == NULL) {
- sprintf(rev_str, "0x%02x", rev);
- rev_name = rev_str;
- }
-
- printf("SoC: Orion5x %s-%s\n", dev_name, rev_name);
-
- return 0;
-}
-#endif /* CONFIG_DISPLAY_CPUINFO */
-
-#ifdef CONFIG_ARCH_CPU_INIT
-int arch_cpu_init(void)
-{
- /* Enable and invalidate L2 cache in write through mode */
- invalidate_l2_cache();
-
- orion5x_config_adr_windows();
-
- return 0;
-}
-#endif /* CONFIG_ARCH_CPU_INIT */
-
-/*
- * SOC specific misc init
- */
-#if defined(CONFIG_ARCH_MISC_INIT)
-int arch_misc_init(void)
-{
- u32 temp;
-
- /*CPU streaming & write allocate */
- temp = readfr_extra_feature_reg();
- temp &= ~(1 << 28); /* disable wr alloc */
- writefr_extra_feature_reg(temp);
-
- temp = readfr_extra_feature_reg();
- temp &= ~(1 << 29); /* streaming disabled */
- writefr_extra_feature_reg(temp);
-
- /* L2Cache settings */
- temp = readfr_extra_feature_reg();
- /* Disable L2C pre fetch - Set bit 24 */
- temp |= (1 << 24);
- /* enable L2C - Set bit 22 */
- temp |= (1 << 22);
- writefr_extra_feature_reg(temp);
-
- icache_enable();
- /* Change reset vector to address 0x0 */
- temp = get_cr();
- set_cr(temp & ~CR_V);
-
- /* Set CPIOs and MPPs - values provided by board
- include file */
- writel(ORION5X_MPP0_7, ORION5X_MPP_BASE+0x00);
- writel(ORION5X_MPP8_15, ORION5X_MPP_BASE+0x04);
- writel(ORION5X_MPP16_23, ORION5X_MPP_BASE+0x50);
- writel(ORION5X_GPIO_OUT_VALUE, ORION5X_GPIO_BASE+0x00);
- writel(ORION5X_GPIO_OUT_ENABLE, ORION5X_GPIO_BASE+0x04);
- writel(ORION5X_GPIO_IN_POLARITY, ORION5X_GPIO_BASE+0x0c);
-
- /* initialize timer */
- timer_init_r();
- return 0;
-}
-#endif /* CONFIG_ARCH_MISC_INIT */
-
-#ifdef CONFIG_MVGBE
-int cpu_eth_init(bd_t *bis)
-{
- mvgbe_initialize(bis);
- return 0;
-}
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
- *
- * Based on original Kirkwood support which is
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <config.h>
-#include <asm/arch/cpu.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * orion5x_sdram_bar - reads SDRAM Base Address Register
- */
-u32 orion5x_sdram_bar(enum memory_bank bank)
-{
- struct orion5x_ddr_addr_decode_registers *winregs =
- (struct orion5x_ddr_addr_decode_registers *)
- ORION5X_DRAM_BASE;
-
- u32 result = 0;
- u32 enable = 0x01 & winregs[bank].size;
-
- if ((!enable) || (bank > BANK3))
- return 0;
-
- result = winregs[bank].base;
- return result;
-}
-int dram_init (void)
-{
- /* dram_init must store complete ramsize in gd->ram_size */
- gd->ram_size = get_ram_size(
- (long *) orion5x_sdram_bar(0),
- CONFIG_MAX_RAM_BANK_SIZE);
- return 0;
-}
-
-void dram_init_banksize (void)
-{
- int i;
-
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
- gd->bd->bi_dram[i].start = orion5x_sdram_bar(i);
- gd->bd->bi_dram[i].size = get_ram_size(
- (long *) (gd->bd->bi_dram[i].start),
- CONFIG_MAX_RAM_BANK_SIZE);
- }
-}
+++ /dev/null
-/*
- * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
- *
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include "asm/arch/orion5x.h"
-
-/*
- * Configuration values for SDRAM access setup
- */
-
-#define SDRAM_CONFIG 0x3148400
-#define SDRAM_MODE 0x62
-#define SDRAM_CONTROL 0x4041000
-#define SDRAM_TIME_CTRL_LOW 0x11602220
-#define SDRAM_TIME_CTRL_HI 0x40c
-#define SDRAM_OPEN_PAGE_EN 0x0
-/* DDR 1 2x 32M NANYA NT5DS16M16CS-6K ==> 64MB */
-#define SDRAM_BANK0_SIZE 0x3ff0001
-#define SDRAM_ADDR_CTRL 0x10
-
-#define SDRAM_OP_NOP 0x05
-#define SDRAM_OP_SETMODE 0x03
-
-#define SDRAM_PAD_CTRL_WR_EN 0x80000000
-#define SDRAM_PAD_CTRL_TUNE_EN 0x00010000
-#define SDRAM_PAD_CTRL_DRVN_MASK 0x0000003f
-#define SDRAM_PAD_CTRL_DRVP_MASK 0x00000fc0
-
-/*
- * For Guideline MEM-3 - Drive Strength value
- */
-
-#define DDR1_PAD_STRENGTH_DEFAULT 0x00001000
-#define SDRAM_PAD_CTRL_DRV_STR_MASK 0x00003000
-
-/*
- * For Guideline MEM-4 - DQS Reference Delay Tuning
- */
-
-#define MSAR_ARMDDRCLCK_MASK 0x000000f0
-#define MSAR_ARMDDRCLCK_H_MASK 0x00000100
-
-#define MSAR_ARMDDRCLCK_333_167 0x00000000
-#define MSAR_ARMDDRCLCK_500_167 0x00000030
-#define MSAR_ARMDDRCLCK_667_167 0x00000060
-#define MSAR_ARMDDRCLCK_400_200_1 0x000001E0
-#define MSAR_ARMDDRCLCK_400_200 0x00000010
-#define MSAR_ARMDDRCLCK_600_200 0x00000050
-#define MSAR_ARMDDRCLCK_800_200 0x00000070
-
-#define FTDLL_DDR1_166MHZ 0x0047F001
-
-#define FTDLL_DDR1_200MHZ 0x0044D001
-
-/*
- * Low-level init happens right after start.S has switched to SVC32,
- * flushed and disabled caches and disabled MMU. We're still running
- * from the boot chip select, so the first thing we should do is set
- * up RAM for us to relocate into.
- */
-
-.globl lowlevel_init
-
-lowlevel_init:
-
- /* Use 'r4 as the base for internal register accesses */
- ldr r4, =ORION5X_REGS_PHY_BASE
-
- /* move internal registers from the default 0xD0000000
- * to their intended location, defined by SoC */
- ldr r3, =0xD0000000
- add r3, r3, #0x20000
- str r4, [r3, #0x80]
-
- /* Use R3 as the base for DRAM registers */
- add r3, r4, #0x01000
-
- /*DDR SDRAM Initialization Control */
- ldr r6, =0x00000001
- str r6, [r3, #0x480]
-
- /* Use R3 as the base for PCI registers */
- add r3, r4, #0x31000
-
- /* Disable arbiter */
- ldr r6, =0x00000030
- str r6, [r3, #0xd00]
-
- /* Use R3 as the base for DRAM registers */
- add r3, r4, #0x01000
-
- /* set all dram windows to 0 */
- mov r6, #0
- str r6, [r3, #0x504]
- str r6, [r3, #0x50C]
- str r6, [r3, #0x514]
- str r6, [r3, #0x51C]
-
- /* 1) Configure SDRAM */
- ldr r6, =SDRAM_CONFIG
- str r6, [r3, #0x400]
-
- /* 2) Set SDRAM Control reg */
- ldr r6, =SDRAM_CONTROL
- str r6, [r3, #0x404]
-
- /* 3) Write SDRAM address control register */
- ldr r6, =SDRAM_ADDR_CTRL
- str r6, [r3, #0x410]
-
- /* 4) Write SDRAM bank 0 size register */
- ldr r6, =SDRAM_BANK0_SIZE
- str r6, [r3, #0x504]
- /* keep other banks disabled */
-
- /* 5) Write SDRAM open pages control register */
- ldr r6, =SDRAM_OPEN_PAGE_EN
- str r6, [r3, #0x414]
-
- /* 6) Write SDRAM timing Low register */
- ldr r6, =SDRAM_TIME_CTRL_LOW
- str r6, [r3, #0x408]
-
- /* 7) Write SDRAM timing High register */
- ldr r6, =SDRAM_TIME_CTRL_HI
- str r6, [r3, #0x40C]
-
- /* 8) Write SDRAM mode register */
- /* The CPU must not attempt to change the SDRAM Mode register setting */
- /* prior to DRAM controller completion of the DRAM initialization */
- /* sequence. To guarantee this restriction, it is recommended that */
- /* the CPU sets the SDRAM Operation register to NOP command, performs */
- /* read polling until the register is back in Normal operation value, */
- /* and then sets SDRAM Mode register to its new value. */
-
- /* 8.1 write 'nop' to SDRAM operation */
- ldr r6, =SDRAM_OP_NOP
- str r6, [r3, #0x418]
-
- /* 8.2 poll SDRAM operation until back in 'normal' mode. */
-1:
- ldr r6, [r3, #0x418]
- cmp r6, #0
- bne 1b
-
- /* 8.3 Now its safe to write new value to SDRAM Mode register */
- ldr r6, =SDRAM_MODE
- str r6, [r3, #0x41C]
-
- /* 8.4 Set new mode */
- ldr r6, =SDRAM_OP_SETMODE
- str r6, [r3, #0x418]
-
- /* 8.5 poll SDRAM operation until back in 'normal' mode. */
-2:
- ldr r6, [r3, #0x418]
- cmp r6, #0
- bne 2b
-
- /* DDR SDRAM Address/Control Pads Calibration */
- ldr r6, [r3, #0x4C0]
-
- /* Set Bit [31] to make the register writable */
- orr r6, r6, #SDRAM_PAD_CTRL_WR_EN
- str r6, [r3, #0x4C0]
-
- bic r6, r6, #SDRAM_PAD_CTRL_WR_EN
- bic r6, r6, #SDRAM_PAD_CTRL_TUNE_EN
- bic r6, r6, #SDRAM_PAD_CTRL_DRVN_MASK
- bic r6, r6, #SDRAM_PAD_CTRL_DRVP_MASK
-
- /* Get the final N locked value of driving strength [22:17] */
- mov r1, r6
- mov r1, r1, LSL #9
- mov r1, r1, LSR #26 /* r1[5:0]<DrvN> = r3[22:17]<LockN> */
- orr r1, r1, r1, LSL #6 /* r1[11:6]<DrvP> = r1[5:0]<DrvN> */
-
- /* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6] */
- orr r6, r6, r1
- str r6, [r3, #0x4C0]
-
- /* DDR SDRAM Data Pads Calibration */
- ldr r6, [r3, #0x4C4]
-
- /* Set Bit [31] to make the register writable */
- orr r6, r6, #SDRAM_PAD_CTRL_WR_EN
- str r6, [r3, #0x4C4]
-
- bic r6, r6, #SDRAM_PAD_CTRL_WR_EN
- bic r6, r6, #SDRAM_PAD_CTRL_TUNE_EN
- bic r6, r6, #SDRAM_PAD_CTRL_DRVN_MASK
- bic r6, r6, #SDRAM_PAD_CTRL_DRVP_MASK
-
- /* Get the final N locked value of driving strength [22:17] */
- mov r1, r6
- mov r1, r1, LSL #9
- mov r1, r1, LSR #26
- orr r1, r1, r1, LSL #6 /* r1[5:0] = r3[22:17]<LockN> */
-
- /* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6] */
- orr r6, r6, r1
-
- str r6, [r3, #0x4C4]
-
- /* Implement Guideline (GL# MEM-3) Drive Strength Value */
- /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0 */
-
- ldr r1, =DDR1_PAD_STRENGTH_DEFAULT
-
- /* Enable writes to DDR SDRAM Addr/Ctrl Pads Calibration register */
- ldr r6, [r3, #0x4C0]
- orr r6, r6, #SDRAM_PAD_CTRL_WR_EN
- str r6, [r3, #0x4C0]
-
- /* Correct strength and disable writes again */
- bic r6, r6, #SDRAM_PAD_CTRL_WR_EN
- bic r6, r6, #SDRAM_PAD_CTRL_DRV_STR_MASK
- orr r6, r6, r1
- str r6, [r3, #0x4C0]
-
- /* Enable writes to DDR SDRAM Data Pads Calibration register */
- ldr r6, [r3, #0x4C4]
- orr r6, r6, #SDRAM_PAD_CTRL_WR_EN
- str r6, [r3, #0x4C4]
-
- /* Correct strength and disable writes again */
- bic r6, r6, #SDRAM_PAD_CTRL_DRV_STR_MASK
- bic r6, r6, #SDRAM_PAD_CTRL_WR_EN
- orr r6, r6, r1
- str r6, [r3, #0x4C4]
-
- /* Implement Guideline (GL# MEM-4) DQS Reference Delay Tuning */
- /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0 */
-
- /* Get the "sample on reset" register for the DDR frequancy */
- ldr r3, =0x10000
- ldr r6, [r3, #0x010]
- ldr r1, =MSAR_ARMDDRCLCK_MASK
- and r1, r6, r1
-
- ldr r6, =FTDLL_DDR1_166MHZ
- cmp r1, #MSAR_ARMDDRCLCK_333_167
- beq 3f
- cmp r1, #MSAR_ARMDDRCLCK_500_167
- beq 3f
- cmp r1, #MSAR_ARMDDRCLCK_667_167
- beq 3f
-
- ldr r6, =FTDLL_DDR1_200MHZ
- cmp r1, #MSAR_ARMDDRCLCK_400_200_1
- beq 3f
- cmp r1, #MSAR_ARMDDRCLCK_400_200
- beq 3f
- cmp r1, #MSAR_ARMDDRCLCK_600_200
- beq 3f
- cmp r1, #MSAR_ARMDDRCLCK_800_200
- beq 3f
-
- ldr r6, =0
-
-3:
- /* Use R3 as the base for DRAM registers */
- add r3, r4, #0x01000
-
- ldr r2, [r3, #0x484]
- orr r2, r2, r6
- str r2, [r3, #0x484]
-
- /* Return to U-boot via saved link register */
- mov pc, lr
+++ /dev/null
-/*
- * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
- *
- * Based on original Kirkwood support which is
- * Copyright (C) Marvell International Ltd. and its affiliates
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-
-#define UBOOT_CNTR 0 /* counter to use for uboot timer */
-
-/* Timer reload and current value registers */
-struct orion5x_tmr_val {
- u32 reload; /* Timer reload reg */
- u32 val; /* Timer value reg */
-};
-
-/* Timer registers */
-struct orion5x_tmr_registers {
- u32 ctrl; /* Timer control reg */
- u32 pad[3];
- struct orion5x_tmr_val tmr[2];
- u32 wdt_reload;
- u32 wdt_val;
-};
-
-struct orion5x_tmr_registers *orion5x_tmr_regs =
- (struct orion5x_tmr_registers *)ORION5X_TIMER_BASE;
-
-/*
- * ARM Timers Registers Map
- */
-#define CNTMR_CTRL_REG (&orion5x_tmr_regs->ctrl)
-#define CNTMR_RELOAD_REG(tmrnum) (&orion5x_tmr_regs->tmr[tmrnum].reload)
-#define CNTMR_VAL_REG(tmrnum) (&orion5x_tmr_regs->tmr[tmrnum].val)
-
-/*
- * ARM Timers Control Register
- * CPU_TIMERS_CTRL_REG (CTCR)
- */
-#define CTCR_ARM_TIMER_EN_OFFS(cntr) (cntr * 2)
-#define CTCR_ARM_TIMER_EN_MASK(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS)
-#define CTCR_ARM_TIMER_EN(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS(cntr))
-#define CTCR_ARM_TIMER_DIS(cntr) (0 << CTCR_ARM_TIMER_EN_OFFS(cntr))
-
-#define CTCR_ARM_TIMER_AUTO_OFFS(cntr) ((cntr * 2) + 1)
-#define CTCR_ARM_TIMER_AUTO_MASK(cntr) (1 << 1)
-#define CTCR_ARM_TIMER_AUTO_EN(cntr) (1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
-#define CTCR_ARM_TIMER_AUTO_DIS(cntr) (0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
-
-/*
- * ARM Timer\Watchdog Reload Register
- * CNTMR_RELOAD_REG (TRR)
- */
-#define TRG_ARM_TIMER_REL_OFFS 0
-#define TRG_ARM_TIMER_REL_MASK 0xffffffff
-
-/*
- * ARM Timer\Watchdog Register
- * CNTMR_VAL_REG (TVRG)
- */
-#define TVR_ARM_TIMER_OFFS 0
-#define TVR_ARM_TIMER_MASK 0xffffffff
-#define TVR_ARM_TIMER_MAX 0xffffffff
-#define TIMER_LOAD_VAL 0xffffffff
-
-static inline ulong read_timer(void)
-{
- return readl(CNTMR_VAL_REG(UBOOT_CNTR))
- / (CONFIG_SYS_TCLK / 1000);
-}
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define timestamp gd->arch.tbl
-#define lastdec gd->arch.lastinc
-
-ulong get_timer_masked(void)
-{
- ulong now = read_timer();
-
- if (lastdec >= now) {
- /* normal mode */
- timestamp += lastdec - now;
- } else {
- /* we have an overflow ... */
- timestamp += lastdec +
- (TIMER_LOAD_VAL / (CONFIG_SYS_TCLK / 1000)) - now;
- }
- lastdec = now;
-
- return timestamp;
-}
-
-ulong get_timer(ulong base)
-{
- return get_timer_masked() - base;
-}
-
-static inline ulong uboot_cntr_val(void)
-{
- return readl(CNTMR_VAL_REG(UBOOT_CNTR));
-}
-
-void __udelay(unsigned long usec)
-{
- uint current;
- ulong delayticks;
-
- current = uboot_cntr_val();
- delayticks = (usec * (CONFIG_SYS_TCLK / 1000000));
-
- if (current < delayticks) {
- delayticks -= current;
- while (uboot_cntr_val() < current)
- ;
- while ((TIMER_LOAD_VAL - delayticks) < uboot_cntr_val())
- ;
- } else {
- while (uboot_cntr_val() > (current - delayticks))
- ;
- }
-}
-
-/*
- * init the counter
- */
-int timer_init(void)
-{
- unsigned int cntmrctrl;
-
- /* load value into timer */
- writel(TIMER_LOAD_VAL, CNTMR_RELOAD_REG(UBOOT_CNTR));
- writel(TIMER_LOAD_VAL, CNTMR_VAL_REG(UBOOT_CNTR));
-
- /* enable timer in auto reload mode */
- cntmrctrl = readl(CNTMR_CTRL_REG);
- cntmrctrl |= CTCR_ARM_TIMER_EN(UBOOT_CNTR);
- cntmrctrl |= CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR);
- writel(cntmrctrl, CNTMR_CTRL_REG);
- return 0;
-}
-
-void timer_init_r(void)
-{
- /* init the timestamp and lastdec value */
- lastdec = read_timer();
- timestamp = 0;
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
- return (ulong)CONFIG_SYS_HZ;
-}
--- /dev/null
+if ORION5X
+
+choice
+ prompt "Marvell Orion board select"
+
+config TARGET_EDMINIV2
+ bool "LaCie Ethernet Disk mini V2"
+
+endchoice
+
+config SYS_SOC
+ default "orion5x"
+
+source "board/LaCie/edminiv2/Kconfig"
+
+endif
--- /dev/null
+#
+# Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
+#
+# Based on original Kirkwood support which is
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y = cpu.o
+obj-y += dram.o
+obj-y += timer.o
+
+ifndef CONFIG_SKIP_LOWLEVEL_INIT
+obj-y += lowlevel_init.o
+endif
--- /dev/null
+/*
+ * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * Based on original Kirkwood support which is
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <u-boot/md5.h>
+#include <asm/arch/cpu.h>
+
+#define BUFLEN 16
+
+void reset_cpu(unsigned long ignored)
+{
+ struct orion5x_cpu_registers *cpureg =
+ (struct orion5x_cpu_registers *)ORION5X_CPU_REG_BASE;
+
+ writel(readl(&cpureg->rstoutn_mask) | (1 << 2),
+ &cpureg->rstoutn_mask);
+ writel(readl(&cpureg->sys_soft_rst) | 1,
+ &cpureg->sys_soft_rst);
+ while (1)
+ ;
+}
+
+/*
+ * Compute Window Size field value from size expressed in bytes
+ * Used with the Base register to set the address window size and location.
+ * Must be programmed from LSB to MSB as sequence of ones followed by
+ * sequence of zeros. The number of ones specifies the size of the window in
+ * 64 KiB granularity (e.g., a value of 0x00FF specifies 256 = 16 MiB).
+ * NOTES:
+ * 1) A sizeval equal to 0x0 specifies 4 GiB.
+ * 2) A return value of 0x0 specifies 64 KiB.
+ */
+unsigned int orion5x_winctrl_calcsize(unsigned int sizeval)
+{
+ /*
+ * Calculate the number of 64 KiB blocks needed minus one (rounding up).
+ * For sizeval > 0 this is equivalent to:
+ * sizeval = (u32) ceil((double) sizeval / 65536.0) - 1
+ */
+ sizeval = (sizeval - 1) >> 16;
+
+ /*
+ * Propagate 'one' bits to the right by 'oring' them.
+ * We need only treat bits 15-0.
+ */
+ sizeval |= sizeval >> 1; /* 'Or' bit 15 onto bit 14 */
+ sizeval |= sizeval >> 2; /* 'Or' bits 15-14 onto bits 13-12 */
+ sizeval |= sizeval >> 4; /* 'Or' bits 15-12 onto bits 11-8 */
+ sizeval |= sizeval >> 8; /* 'Or' bits 15-8 onto bits 7-0*/
+
+ return sizeval;
+}
+
+/*
+ * orion5x_config_adr_windows - Configure address Windows
+ *
+ * There are 8 address windows supported by Orion5x Soc to addess different
+ * devices. Each window can be configured for size, BAR and remap addr
+ * Below configuration is standard for most of the cases
+ *
+ * If remap function not used, remap_lo must be set as base
+ *
+ * NOTES:
+ *
+ * 1) in order to avoid windows with inconsistent control and base values
+ * (which could prevent access to BOOTCS and hence execution from FLASH)
+ * always disable window before writing the base value then reenable it
+ * by writing the control value.
+ *
+ * 2) in order to avoid losing access to BOOTCS when disabling window 7,
+ * first configure window 6 for BOOTCS, then configure window 7 for BOOTCS,
+ * then configure windows 6 for its own target.
+ *
+ * Reference Documentation:
+ * Mbus-L to Mbus Bridge Registers Configuration.
+ * (Sec 25.1 and 25.3 of Datasheet)
+ */
+int orion5x_config_adr_windows(void)
+{
+ struct orion5x_win_registers *winregs =
+ (struct orion5x_win_registers *)ORION5X_CPU_WIN_BASE;
+
+/* Disable window 0, configure it for its intended target, enable it. */
+ writel(0, &winregs[0].ctrl);
+ writel(ORION5X_ADR_PCIE_MEM, &winregs[0].base);
+ writel(ORION5X_ADR_PCIE_MEM_REMAP_LO, &winregs[0].remap_lo);
+ writel(ORION5X_ADR_PCIE_MEM_REMAP_HI, &winregs[0].remap_hi);
+ writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_MEM,
+ ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_MEM,
+ ORION5X_WIN_ENABLE), &winregs[0].ctrl);
+/* Disable window 1, configure it for its intended target, enable it. */
+ writel(0, &winregs[1].ctrl);
+ writel(ORION5X_ADR_PCIE_IO, &winregs[1].base);
+ writel(ORION5X_ADR_PCIE_IO_REMAP_LO, &winregs[1].remap_lo);
+ writel(ORION5X_ADR_PCIE_IO_REMAP_HI, &winregs[1].remap_hi);
+ writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_IO,
+ ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_IO,
+ ORION5X_WIN_ENABLE), &winregs[1].ctrl);
+/* Disable window 2, configure it for its intended target, enable it. */
+ writel(0, &winregs[2].ctrl);
+ writel(ORION5X_ADR_PCI_MEM, &winregs[2].base);
+ writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCI_MEM,
+ ORION5X_TARGET_PCI, ORION5X_ATTR_PCI_MEM,
+ ORION5X_WIN_ENABLE), &winregs[2].ctrl);
+/* Disable window 3, configure it for its intended target, enable it. */
+ writel(0, &winregs[3].ctrl);
+ writel(ORION5X_ADR_PCI_IO, &winregs[3].base);
+ writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCI_IO,
+ ORION5X_TARGET_PCI, ORION5X_ATTR_PCI_IO,
+ ORION5X_WIN_ENABLE), &winregs[3].ctrl);
+/* Disable window 4, configure it for its intended target, enable it. */
+ writel(0, &winregs[4].ctrl);
+ writel(ORION5X_ADR_DEV_CS0, &winregs[4].base);
+ writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS0,
+ ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS0,
+ ORION5X_WIN_ENABLE), &winregs[4].ctrl);
+/* Disable window 5, configure it for its intended target, enable it. */
+ writel(0, &winregs[5].ctrl);
+ writel(ORION5X_ADR_DEV_CS1, &winregs[5].base);
+ writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS1,
+ ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS1,
+ ORION5X_WIN_ENABLE), &winregs[5].ctrl);
+/* Disable window 6, configure it for FLASH, enable it. */
+ writel(0, &winregs[6].ctrl);
+ writel(ORION5X_ADR_BOOTROM, &winregs[6].base);
+ writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM,
+ ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM,
+ ORION5X_WIN_ENABLE), &winregs[6].ctrl);
+/* Disable window 7, configure it for FLASH, enable it. */
+ writel(0, &winregs[7].ctrl);
+ writel(ORION5X_ADR_BOOTROM, &winregs[7].base);
+ writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM,
+ ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM,
+ ORION5X_WIN_ENABLE), &winregs[7].ctrl);
+/* Disable window 6, configure it for its intended target, enable it. */
+ writel(0, &winregs[6].ctrl);
+ writel(ORION5X_ADR_DEV_CS2, &winregs[6].base);
+ writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS2,
+ ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS2,
+ ORION5X_WIN_ENABLE), &winregs[6].ctrl);
+
+ return 0;
+}
+
+/*
+ * Orion5x identification is done through PCIE space.
+ */
+
+u32 orion5x_device_id(void)
+{
+ return readl(PCIE_DEV_ID_OFF) >> 16;
+}
+
+u32 orion5x_device_rev(void)
+{
+ return readl(PCIE_DEV_REV_OFF) & 0xff;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+
+/* Display device and revision IDs.
+ * This function must cover all known device/revision
+ * combinations, not only the one for which u-boot is
+ * compiled; this way, one can identify actual HW in
+ * case of a mismatch.
+ */
+int print_cpuinfo(void)
+{
+ char dev_str[7]; /* room enough for 0x0000 plus null byte */
+ char rev_str[5]; /* room enough for 0x00 plus null byte */
+ char *dev_name = NULL;
+ char *rev_name = NULL;
+
+ u32 dev = orion5x_device_id();
+ u32 rev = orion5x_device_rev();
+
+ if (dev == MV88F5181_DEV_ID) {
+ dev_name = "MV88F5181";
+ if (rev == MV88F5181_REV_B1)
+ rev_name = "B1";
+ else if (rev == MV88F5181L_REV_A1) {
+ dev_name = "MV88F5181L";
+ rev_name = "A1";
+ } else if (rev == MV88F5181L_REV_A0) {
+ dev_name = "MV88F5181L";
+ rev_name = "A0";
+ }
+ } else if (dev == MV88F5182_DEV_ID) {
+ dev_name = "MV88F5182";
+ if (rev == MV88F5182_REV_A2)
+ rev_name = "A2";
+ } else if (dev == MV88F5281_DEV_ID) {
+ dev_name = "MV88F5281";
+ if (rev == MV88F5281_REV_D2)
+ rev_name = "D2";
+ else if (rev == MV88F5281_REV_D1)
+ rev_name = "D1";
+ else if (rev == MV88F5281_REV_D0)
+ rev_name = "D0";
+ } else if (dev == MV88F6183_DEV_ID) {
+ dev_name = "MV88F6183";
+ if (rev == MV88F6183_REV_B0)
+ rev_name = "B0";
+ }
+ if (dev_name == NULL) {
+ sprintf(dev_str, "0x%04x", dev);
+ dev_name = dev_str;
+ }
+ if (rev_name == NULL) {
+ sprintf(rev_str, "0x%02x", rev);
+ rev_name = rev_str;
+ }
+
+ printf("SoC: Orion5x %s-%s\n", dev_name, rev_name);
+
+ return 0;
+}
+#endif /* CONFIG_DISPLAY_CPUINFO */
+
+#ifdef CONFIG_ARCH_CPU_INIT
+int arch_cpu_init(void)
+{
+ /* Enable and invalidate L2 cache in write through mode */
+ invalidate_l2_cache();
+
+ orion5x_config_adr_windows();
+
+ return 0;
+}
+#endif /* CONFIG_ARCH_CPU_INIT */
+
+/*
+ * SOC specific misc init
+ */
+#if defined(CONFIG_ARCH_MISC_INIT)
+int arch_misc_init(void)
+{
+ u32 temp;
+
+ /*CPU streaming & write allocate */
+ temp = readfr_extra_feature_reg();
+ temp &= ~(1 << 28); /* disable wr alloc */
+ writefr_extra_feature_reg(temp);
+
+ temp = readfr_extra_feature_reg();
+ temp &= ~(1 << 29); /* streaming disabled */
+ writefr_extra_feature_reg(temp);
+
+ /* L2Cache settings */
+ temp = readfr_extra_feature_reg();
+ /* Disable L2C pre fetch - Set bit 24 */
+ temp |= (1 << 24);
+ /* enable L2C - Set bit 22 */
+ temp |= (1 << 22);
+ writefr_extra_feature_reg(temp);
+
+ icache_enable();
+ /* Change reset vector to address 0x0 */
+ temp = get_cr();
+ set_cr(temp & ~CR_V);
+
+ /* Set CPIOs and MPPs - values provided by board
+ include file */
+ writel(ORION5X_MPP0_7, ORION5X_MPP_BASE+0x00);
+ writel(ORION5X_MPP8_15, ORION5X_MPP_BASE+0x04);
+ writel(ORION5X_MPP16_23, ORION5X_MPP_BASE+0x50);
+ writel(ORION5X_GPIO_OUT_VALUE, ORION5X_GPIO_BASE+0x00);
+ writel(ORION5X_GPIO_OUT_ENABLE, ORION5X_GPIO_BASE+0x04);
+ writel(ORION5X_GPIO_IN_POLARITY, ORION5X_GPIO_BASE+0x0c);
+
+ /* initialize timer */
+ timer_init_r();
+ return 0;
+}
+#endif /* CONFIG_ARCH_MISC_INIT */
+
+#ifdef CONFIG_MVGBE
+int cpu_eth_init(bd_t *bis)
+{
+ mvgbe_initialize(bis);
+ return 0;
+}
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * Based on original Kirkwood support which is
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/arch/cpu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * orion5x_sdram_bar - reads SDRAM Base Address Register
+ */
+u32 orion5x_sdram_bar(enum memory_bank bank)
+{
+ struct orion5x_ddr_addr_decode_registers *winregs =
+ (struct orion5x_ddr_addr_decode_registers *)
+ ORION5X_DRAM_BASE;
+
+ u32 result = 0;
+ u32 enable = 0x01 & winregs[bank].size;
+
+ if ((!enable) || (bank > BANK3))
+ return 0;
+
+ result = winregs[bank].base;
+ return result;
+}
+int dram_init (void)
+{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size(
+ (long *) orion5x_sdram_bar(0),
+ CONFIG_MAX_RAM_BANK_SIZE);
+ return 0;
+}
+
+void dram_init_banksize (void)
+{
+ int i;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ gd->bd->bi_dram[i].start = orion5x_sdram_bar(i);
+ gd->bd->bi_dram[i].size = get_ram_size(
+ (long *) (gd->bd->bi_dram[i].start),
+ CONFIG_MAX_RAM_BANK_SIZE);
+ }
+}
--- /dev/null
+/*
+ * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include "asm/arch/orion5x.h"
+
+/*
+ * Configuration values for SDRAM access setup
+ */
+
+#define SDRAM_CONFIG 0x3148400
+#define SDRAM_MODE 0x62
+#define SDRAM_CONTROL 0x4041000
+#define SDRAM_TIME_CTRL_LOW 0x11602220
+#define SDRAM_TIME_CTRL_HI 0x40c
+#define SDRAM_OPEN_PAGE_EN 0x0
+/* DDR 1 2x 32M NANYA NT5DS16M16CS-6K ==> 64MB */
+#define SDRAM_BANK0_SIZE 0x3ff0001
+#define SDRAM_ADDR_CTRL 0x10
+
+#define SDRAM_OP_NOP 0x05
+#define SDRAM_OP_SETMODE 0x03
+
+#define SDRAM_PAD_CTRL_WR_EN 0x80000000
+#define SDRAM_PAD_CTRL_TUNE_EN 0x00010000
+#define SDRAM_PAD_CTRL_DRVN_MASK 0x0000003f
+#define SDRAM_PAD_CTRL_DRVP_MASK 0x00000fc0
+
+/*
+ * For Guideline MEM-3 - Drive Strength value
+ */
+
+#define DDR1_PAD_STRENGTH_DEFAULT 0x00001000
+#define SDRAM_PAD_CTRL_DRV_STR_MASK 0x00003000
+
+/*
+ * For Guideline MEM-4 - DQS Reference Delay Tuning
+ */
+
+#define MSAR_ARMDDRCLCK_MASK 0x000000f0
+#define MSAR_ARMDDRCLCK_H_MASK 0x00000100
+
+#define MSAR_ARMDDRCLCK_333_167 0x00000000
+#define MSAR_ARMDDRCLCK_500_167 0x00000030
+#define MSAR_ARMDDRCLCK_667_167 0x00000060
+#define MSAR_ARMDDRCLCK_400_200_1 0x000001E0
+#define MSAR_ARMDDRCLCK_400_200 0x00000010
+#define MSAR_ARMDDRCLCK_600_200 0x00000050
+#define MSAR_ARMDDRCLCK_800_200 0x00000070
+
+#define FTDLL_DDR1_166MHZ 0x0047F001
+
+#define FTDLL_DDR1_200MHZ 0x0044D001
+
+/*
+ * Low-level init happens right after start.S has switched to SVC32,
+ * flushed and disabled caches and disabled MMU. We're still running
+ * from the boot chip select, so the first thing we should do is set
+ * up RAM for us to relocate into.
+ */
+
+.globl lowlevel_init
+
+lowlevel_init:
+
+ /* Use 'r4 as the base for internal register accesses */
+ ldr r4, =ORION5X_REGS_PHY_BASE
+
+ /* move internal registers from the default 0xD0000000
+ * to their intended location, defined by SoC */
+ ldr r3, =0xD0000000
+ add r3, r3, #0x20000
+ str r4, [r3, #0x80]
+
+ /* Use R3 as the base for DRAM registers */
+ add r3, r4, #0x01000
+
+ /*DDR SDRAM Initialization Control */
+ ldr r6, =0x00000001
+ str r6, [r3, #0x480]
+
+ /* Use R3 as the base for PCI registers */
+ add r3, r4, #0x31000
+
+ /* Disable arbiter */
+ ldr r6, =0x00000030
+ str r6, [r3, #0xd00]
+
+ /* Use R3 as the base for DRAM registers */
+ add r3, r4, #0x01000
+
+ /* set all dram windows to 0 */
+ mov r6, #0
+ str r6, [r3, #0x504]
+ str r6, [r3, #0x50C]
+ str r6, [r3, #0x514]
+ str r6, [r3, #0x51C]
+
+ /* 1) Configure SDRAM */
+ ldr r6, =SDRAM_CONFIG
+ str r6, [r3, #0x400]
+
+ /* 2) Set SDRAM Control reg */
+ ldr r6, =SDRAM_CONTROL
+ str r6, [r3, #0x404]
+
+ /* 3) Write SDRAM address control register */
+ ldr r6, =SDRAM_ADDR_CTRL
+ str r6, [r3, #0x410]
+
+ /* 4) Write SDRAM bank 0 size register */
+ ldr r6, =SDRAM_BANK0_SIZE
+ str r6, [r3, #0x504]
+ /* keep other banks disabled */
+
+ /* 5) Write SDRAM open pages control register */
+ ldr r6, =SDRAM_OPEN_PAGE_EN
+ str r6, [r3, #0x414]
+
+ /* 6) Write SDRAM timing Low register */
+ ldr r6, =SDRAM_TIME_CTRL_LOW
+ str r6, [r3, #0x408]
+
+ /* 7) Write SDRAM timing High register */
+ ldr r6, =SDRAM_TIME_CTRL_HI
+ str r6, [r3, #0x40C]
+
+ /* 8) Write SDRAM mode register */
+ /* The CPU must not attempt to change the SDRAM Mode register setting */
+ /* prior to DRAM controller completion of the DRAM initialization */
+ /* sequence. To guarantee this restriction, it is recommended that */
+ /* the CPU sets the SDRAM Operation register to NOP command, performs */
+ /* read polling until the register is back in Normal operation value, */
+ /* and then sets SDRAM Mode register to its new value. */
+
+ /* 8.1 write 'nop' to SDRAM operation */
+ ldr r6, =SDRAM_OP_NOP
+ str r6, [r3, #0x418]
+
+ /* 8.2 poll SDRAM operation until back in 'normal' mode. */
+1:
+ ldr r6, [r3, #0x418]
+ cmp r6, #0
+ bne 1b
+
+ /* 8.3 Now its safe to write new value to SDRAM Mode register */
+ ldr r6, =SDRAM_MODE
+ str r6, [r3, #0x41C]
+
+ /* 8.4 Set new mode */
+ ldr r6, =SDRAM_OP_SETMODE
+ str r6, [r3, #0x418]
+
+ /* 8.5 poll SDRAM operation until back in 'normal' mode. */
+2:
+ ldr r6, [r3, #0x418]
+ cmp r6, #0
+ bne 2b
+
+ /* DDR SDRAM Address/Control Pads Calibration */
+ ldr r6, [r3, #0x4C0]
+
+ /* Set Bit [31] to make the register writable */
+ orr r6, r6, #SDRAM_PAD_CTRL_WR_EN
+ str r6, [r3, #0x4C0]
+
+ bic r6, r6, #SDRAM_PAD_CTRL_WR_EN
+ bic r6, r6, #SDRAM_PAD_CTRL_TUNE_EN
+ bic r6, r6, #SDRAM_PAD_CTRL_DRVN_MASK
+ bic r6, r6, #SDRAM_PAD_CTRL_DRVP_MASK
+
+ /* Get the final N locked value of driving strength [22:17] */
+ mov r1, r6
+ mov r1, r1, LSL #9
+ mov r1, r1, LSR #26 /* r1[5:0]<DrvN> = r3[22:17]<LockN> */
+ orr r1, r1, r1, LSL #6 /* r1[11:6]<DrvP> = r1[5:0]<DrvN> */
+
+ /* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6] */
+ orr r6, r6, r1
+ str r6, [r3, #0x4C0]
+
+ /* DDR SDRAM Data Pads Calibration */
+ ldr r6, [r3, #0x4C4]
+
+ /* Set Bit [31] to make the register writable */
+ orr r6, r6, #SDRAM_PAD_CTRL_WR_EN
+ str r6, [r3, #0x4C4]
+
+ bic r6, r6, #SDRAM_PAD_CTRL_WR_EN
+ bic r6, r6, #SDRAM_PAD_CTRL_TUNE_EN
+ bic r6, r6, #SDRAM_PAD_CTRL_DRVN_MASK
+ bic r6, r6, #SDRAM_PAD_CTRL_DRVP_MASK
+
+ /* Get the final N locked value of driving strength [22:17] */
+ mov r1, r6
+ mov r1, r1, LSL #9
+ mov r1, r1, LSR #26
+ orr r1, r1, r1, LSL #6 /* r1[5:0] = r3[22:17]<LockN> */
+
+ /* Write to both <DrvN> bits [5:0] and <DrvP> bits [11:6] */
+ orr r6, r6, r1
+
+ str r6, [r3, #0x4C4]
+
+ /* Implement Guideline (GL# MEM-3) Drive Strength Value */
+ /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0 */
+
+ ldr r1, =DDR1_PAD_STRENGTH_DEFAULT
+
+ /* Enable writes to DDR SDRAM Addr/Ctrl Pads Calibration register */
+ ldr r6, [r3, #0x4C0]
+ orr r6, r6, #SDRAM_PAD_CTRL_WR_EN
+ str r6, [r3, #0x4C0]
+
+ /* Correct strength and disable writes again */
+ bic r6, r6, #SDRAM_PAD_CTRL_WR_EN
+ bic r6, r6, #SDRAM_PAD_CTRL_DRV_STR_MASK
+ orr r6, r6, r1
+ str r6, [r3, #0x4C0]
+
+ /* Enable writes to DDR SDRAM Data Pads Calibration register */
+ ldr r6, [r3, #0x4C4]
+ orr r6, r6, #SDRAM_PAD_CTRL_WR_EN
+ str r6, [r3, #0x4C4]
+
+ /* Correct strength and disable writes again */
+ bic r6, r6, #SDRAM_PAD_CTRL_DRV_STR_MASK
+ bic r6, r6, #SDRAM_PAD_CTRL_WR_EN
+ orr r6, r6, r1
+ str r6, [r3, #0x4C4]
+
+ /* Implement Guideline (GL# MEM-4) DQS Reference Delay Tuning */
+ /* Relevant for: 88F5181-A1/B0/B1 and 88F5281-A0/B0 */
+
+ /* Get the "sample on reset" register for the DDR frequancy */
+ ldr r3, =0x10000
+ ldr r6, [r3, #0x010]
+ ldr r1, =MSAR_ARMDDRCLCK_MASK
+ and r1, r6, r1
+
+ ldr r6, =FTDLL_DDR1_166MHZ
+ cmp r1, #MSAR_ARMDDRCLCK_333_167
+ beq 3f
+ cmp r1, #MSAR_ARMDDRCLCK_500_167
+ beq 3f
+ cmp r1, #MSAR_ARMDDRCLCK_667_167
+ beq 3f
+
+ ldr r6, =FTDLL_DDR1_200MHZ
+ cmp r1, #MSAR_ARMDDRCLCK_400_200_1
+ beq 3f
+ cmp r1, #MSAR_ARMDDRCLCK_400_200
+ beq 3f
+ cmp r1, #MSAR_ARMDDRCLCK_600_200
+ beq 3f
+ cmp r1, #MSAR_ARMDDRCLCK_800_200
+ beq 3f
+
+ ldr r6, =0
+
+3:
+ /* Use R3 as the base for DRAM registers */
+ add r3, r4, #0x01000
+
+ ldr r2, [r3, #0x484]
+ orr r2, r2, r6
+ str r2, [r3, #0x484]
+
+ /* Return to U-boot via saved link register */
+ mov pc, lr
--- /dev/null
+/*
+ * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * Based on original Kirkwood support which is
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#define UBOOT_CNTR 0 /* counter to use for uboot timer */
+
+/* Timer reload and current value registers */
+struct orion5x_tmr_val {
+ u32 reload; /* Timer reload reg */
+ u32 val; /* Timer value reg */
+};
+
+/* Timer registers */
+struct orion5x_tmr_registers {
+ u32 ctrl; /* Timer control reg */
+ u32 pad[3];
+ struct orion5x_tmr_val tmr[2];
+ u32 wdt_reload;
+ u32 wdt_val;
+};
+
+struct orion5x_tmr_registers *orion5x_tmr_regs =
+ (struct orion5x_tmr_registers *)ORION5X_TIMER_BASE;
+
+/*
+ * ARM Timers Registers Map
+ */
+#define CNTMR_CTRL_REG (&orion5x_tmr_regs->ctrl)
+#define CNTMR_RELOAD_REG(tmrnum) (&orion5x_tmr_regs->tmr[tmrnum].reload)
+#define CNTMR_VAL_REG(tmrnum) (&orion5x_tmr_regs->tmr[tmrnum].val)
+
+/*
+ * ARM Timers Control Register
+ * CPU_TIMERS_CTRL_REG (CTCR)
+ */
+#define CTCR_ARM_TIMER_EN_OFFS(cntr) (cntr * 2)
+#define CTCR_ARM_TIMER_EN_MASK(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS)
+#define CTCR_ARM_TIMER_EN(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS(cntr))
+#define CTCR_ARM_TIMER_DIS(cntr) (0 << CTCR_ARM_TIMER_EN_OFFS(cntr))
+
+#define CTCR_ARM_TIMER_AUTO_OFFS(cntr) ((cntr * 2) + 1)
+#define CTCR_ARM_TIMER_AUTO_MASK(cntr) (1 << 1)
+#define CTCR_ARM_TIMER_AUTO_EN(cntr) (1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
+#define CTCR_ARM_TIMER_AUTO_DIS(cntr) (0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
+
+/*
+ * ARM Timer\Watchdog Reload Register
+ * CNTMR_RELOAD_REG (TRR)
+ */
+#define TRG_ARM_TIMER_REL_OFFS 0
+#define TRG_ARM_TIMER_REL_MASK 0xffffffff
+
+/*
+ * ARM Timer\Watchdog Register
+ * CNTMR_VAL_REG (TVRG)
+ */
+#define TVR_ARM_TIMER_OFFS 0
+#define TVR_ARM_TIMER_MASK 0xffffffff
+#define TVR_ARM_TIMER_MAX 0xffffffff
+#define TIMER_LOAD_VAL 0xffffffff
+
+static inline ulong read_timer(void)
+{
+ return readl(CNTMR_VAL_REG(UBOOT_CNTR))
+ / (CONFIG_SYS_TCLK / 1000);
+}
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
+
+ulong get_timer_masked(void)
+{
+ ulong now = read_timer();
+
+ if (lastdec >= now) {
+ /* normal mode */
+ timestamp += lastdec - now;
+ } else {
+ /* we have an overflow ... */
+ timestamp += lastdec +
+ (TIMER_LOAD_VAL / (CONFIG_SYS_TCLK / 1000)) - now;
+ }
+ lastdec = now;
+
+ return timestamp;
+}
+
+ulong get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+static inline ulong uboot_cntr_val(void)
+{
+ return readl(CNTMR_VAL_REG(UBOOT_CNTR));
+}
+
+void __udelay(unsigned long usec)
+{
+ uint current;
+ ulong delayticks;
+
+ current = uboot_cntr_val();
+ delayticks = (usec * (CONFIG_SYS_TCLK / 1000000));
+
+ if (current < delayticks) {
+ delayticks -= current;
+ while (uboot_cntr_val() < current)
+ ;
+ while ((TIMER_LOAD_VAL - delayticks) < uboot_cntr_val())
+ ;
+ } else {
+ while (uboot_cntr_val() > (current - delayticks))
+ ;
+ }
+}
+
+/*
+ * init the counter
+ */
+int timer_init(void)
+{
+ unsigned int cntmrctrl;
+
+ /* load value into timer */
+ writel(TIMER_LOAD_VAL, CNTMR_RELOAD_REG(UBOOT_CNTR));
+ writel(TIMER_LOAD_VAL, CNTMR_VAL_REG(UBOOT_CNTR));
+
+ /* enable timer in auto reload mode */
+ cntmrctrl = readl(CNTMR_CTRL_REG);
+ cntmrctrl |= CTCR_ARM_TIMER_EN(UBOOT_CNTR);
+ cntmrctrl |= CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR);
+ writel(cntmrctrl, CNTMR_CTRL_REG);
+ return 0;
+}
+
+void timer_init_r(void)
+{
+ /* init the timestamp and lastdec value */
+ lastdec = read_timer();
+ timestamp = 0;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+ return (ulong)CONFIG_SYS_HZ;
+}
projects / oweals / u-boot.git / commitdiff