+#
+# NOTE! Don't add files that are generated in specific
+# subdirectories here. Add them in the ".gitignore" file
+# in that subdirectory instead.
+#
+# Normal rules
+#
+
+*.rej
*.orig
*.a
*.o
-*.depend
-System.map
+
+#
+# Top-level generic files
+#
+
+/System.map
/u-boot
/u-boot.map
/u-boot.bin
/u-boot.srec
+
+#
+# Generated files
+#
+
+*.depend
/LOG
/errlog
/reloc_off
+# stgit generated dirs
+patches-*
+
+# quilt's files
+patches
+series
+
+# cscope files
+cscope.*
-commit 467bcee11fe26ad422f2de971aa70866079870f2
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Fri Dec 14 15:36:18 2007 +0100
+commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 18 04:29:55 2007 -0500
- cfi_flash: Add manufacturer-specific fixups
+ fix easylogo on big endian dev systems
- Run fixups based on the JEDEC manufacturer ID independent of the
- command set ID.
+ didnt realize how out of shape easylogo actually was until i tried using it.
+ this patch does byte swapping as need be on the input tga header since the tga
+ is in little endian but the host could just as well be big endian. i didnt
+ bother using bswap macros or such stuff from system headers as nothing in
+ POSIX dictates byte swapping functionality.
- This changes current behaviour: Previously, geometry reversal for AMD
- chips were done based on the command set ID, while they are now done
- based on the JEDEC manufacturer and device ID.
+ Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
- Also add fixup for top-boot Atmel chips. A fixup is needed for
- AT49BV6416(T) too, but since u-boot currently only reads the low byte
- of the device ID, there's no way to tell it apart from AT49BV642D,
- which should not have this fixup. Since AT49BV642D support is
- necessary to get ATNGW100 board support into mainline, I've commented
- out the fixup for now.
+commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 18 03:23:25 2007 -0500
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ cleanup easylogo
-commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Fri Dec 14 15:36:17 2007 +0100
+ - make the Makefile not suck
+ - include proper headers for prototypes
+ - fix obvious broken handling of strchr() when handling '.' in filenames
- cfi_flash: Add cmdset-specific init functions
+ Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
- Move things like reading JEDEC IDs and fixing up geometry reversal
- into separate functions. The geometry reversal fixup is now performed
- by altering the qry structure directly, which makes the sector init
- code slightly cleaner.
+commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
+Author: raptorbrino@aim.com <raptorbrino@aim.com>
+Date: Thu Dec 13 21:23:28 2007 -0500
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ Fix build problems under Cygwin
-commit e23741f4a6d8047520ef0d4971762749b3587d32
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Fri Dec 14 15:36:16 2007 +0100
+ This patch allows u-boot to build without error in a cygwin
+ environment. Cygwin does not define __u64 in it's
+ include/asm/types.h file. The -idirafter flag in the u-boot
+ build causes the inclusion of the cygwin types.h file as opposed
+ to u-bot/include/asm/types.h file which does define __u64.
+ Subsequently, sha1.c compile fails due to unknown symbol.
- cfi_flash: Read whole QRY structure in one go
+ Signed-off-by: Brian Miller <raptorbrino@netscape.net>
- Read out the whole CFI Standard Query structure after successful cfi
- identification. This allows subsequent code to access this information
- directly without having to go through flash_read_uchar() and friends.
+commit 43ef1c381f9195504a2488f5cb909227eb97d475
+Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+Date: Fri Nov 30 17:29:59 2007 +0100
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ cmd_bmp: Add support for displaying gzip compressed bmps
-commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Mon Dec 17 11:02:44 2007 +0100
+ The existing code can show information about a gzip compressed BMP
+ image, but can't actually display it.
- AVR32: Fix logic inversion in disable_interrupts()
+ Therefore, move the decompression code out of bmp_info() and use it in
+ bmp_display() as well in order to display a compressed BMP image.
- disable_interrupts() should return nonzero if interrupts were
- _enabled_ before, not disabled.
+ Also, clean things up a bit and fix a memory leak while we're at it.
+ [hskinnemoen@atmel.com: a bit of refactoring]
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-commit acac475212cbedb17b321a363a1c878e2b47b37f
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Fri Dec 14 16:51:22 2007 +0100
+commit d197ffd8172c6fdef38733424640a9a47295d6e9
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Nov 29 21:15:56 2007 +0100
- AVR32: Enable interrupts at bootup
+ Fix and optimize MII operations on FEC (MPC8xx) controllers
- The timer code depends on the timer interrupt to keep track of the
- upper 32 bits of the cycle counter. This obviously doesn't work when
- interrupts are disabled the whole time.
+ This patch fixes several issues at least on a MPC885 based system with two
+ FEC interfaces used in MII mode.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ 1. PHY discovery should first read PHY_PHYIDR2 register and only then
+ PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
+ otherwise the values read are wrong. Also notice, that PHY discovery
+ cannot work on MPC88x / MPC87x in setups with both FECs active at all
+ in its present form, because for both interfaces the registers from FEC
+ 1 are used to communicate over MII.
-commit 9570bcd87f4db255514f43b6701746c412f8fef0
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Thu Nov 15 10:03:45 2007 +0100
+ 2. Remove code duplication for resetting the FEC by isolating it into a
+ separate function.
- AVR32: Fix wrong pin setup for USART3
+ 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
- As reported by Gerhard Berghofer:
+ 4. Optimize mii_init() to only reset the FEC 1 controller once.
- in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
- instead of PB18 and PB19.
+ 5. Fix a typo in mii_init() using index i instead of j thus potentially
+ leading to unpredictable results.
- which is obviously correct. There's currently no code that uses
- USART3, but custom boards may run into problems.
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Nov 20 13:14:20 2007 +0100
-commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Thu Nov 1 12:44:20 2007 +0100
+ Fix endianness conversions in rtl8169 driver
- README: Remove ATSTK1000 daughterboard list
+ It is unclear on what platforms this driver has been tested, since
+ noone up to now defines CONFIG_RTL8169 in the board configuration
+ header. Now it has been fixed for a big-endian mpc8241 based
+ linkstation platform. This patch presents the necessary endianness
+ conversion fixes.
- As noted by Kim Phillips, these lists tend to become out of date.
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 9 13:43:38 2008 +0100
-commit c81cbbad21cb0ae983e2e796211202234cdc8be2
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Tue Oct 30 14:56:36 2007 +0100
+ Coding Style clenaup; update CHANGELOG
- Add ATSTK100[234] to MAINTAINERS
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
- Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
- "mother". Also update the entry for ATSTK1000 to be not only about the
- AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
+commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 17:13:11 2007 +0100
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ Remove bit swapping in Xilinx Spartan bitfile loading
-commit 64ff2357b1727213803591813dbc779c924bf772
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Mon Oct 29 13:02:54 2007 +0100
+ This patch removes the unnecessary bit swapping when
+ booting .bit files with the 'fpga loadb' command.
- AVR32: Add support for the ATSTK1004 board
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
- which is a derivative of AT32AP7000.
+commit 437fc7327f0611f82937858f2d80e4cd61b40984
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 17:13:05 2007 +0100
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ Fix MSB check in Xilinx Spartan slave serial mode
-commit 667568db157f374b85abd7e03596ddd1f0b25681
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Mon Oct 29 13:02:54 2007 +0100
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- AVR32: Add support for the ATSTK1003 board
+commit 3bff4ffa33729a42645e328a21e8d16488872958
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 17:12:56 2007 +0100
- ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
- which is a derivative of AT32AP7000.
+ Add new Xilinx Spartan FPGA types
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-commit 5fee84a794a51ec830548cda485a770efb018b92
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Mon Oct 29 13:23:33 2007 +0100
+commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 17:12:43 2007 +0100
- AVR32: Make some AT32AP700x peripherals optional
+ Add pre and post configuration callbacks for Spartan FPGAs
- Add a chip-features file providing definitions of the form
+ This patch adds a post configuration callback for Spartan2/3 FPGAs.
+ pre and post configuration callback are now optional and
+ not called when the function pointer is set to NULL.
- AT32AP700x_CHIP_HAS_<peripheral>
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- to indicate the availability of the given peripheral on the currently
- selected chip.
+commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 17:12:34 2007 +0100
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ Improve configuration of FPGA subsystem
-commit 36f28f8a9605ee5dcfa330482cfc62171261af97
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Mon Oct 29 13:09:56 2007 +0100
+ This patch removes the FPGA subsystem configuration through
+ the CONFIG_FPGA bitmask configuration option.
- AVR32: Rename at32ap7000 -> at32ap700x
+ See README for the new options:
- The SoC-specific code for all the AT32AP700x CPUs is practically
- identical; the only difference is that some chips have less features
- than others. By doing this rename, we can add support for the AP7000
- derivatives simply by making some features conditional.
+ CONFIG_FPGA,
+ CONFIG_FPGA_<vendor>,
+ CONFIG_FPGA_<family>
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Fri Jun 29 18:22:34 2007 +0200
+commit 95c6bc7d4a3588b452baca610f8c795a83630477
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 16:55:17 2007 +0100
- atmel_mci: Show SR when block read fails
+ Add Epson RX8025 RTC support
- Show controller status as well as card status when an error occurs
- during block read.
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 16:57:23 2007 +0100
-commit 12d30aa79779c2aa7a998bbae4c075f822a53004
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Thu Dec 13 12:56:34 2007 +0100
+ serial: Make default_serial_console() a weak function
- cfi_flash: Use map_physmem() and unmap_physmem()
+ With this patch it is possible to reimplement default_serial_console()
+ in board specific code. This will be done in the upcomming PMC440
+ U-Boot port. This also allows the lwmon board maintainer to
+ remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
- Use map_physmem() and unmap_physmem() to convert from physical to
- virtual addresses. This gives the arch a chance to provide an uncached
- mapping for flash accesses.
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Dec 19 14:14:47 2007 +0100
-commit 4d7d6936eb29af7cca330937808312aa5f61454d
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Thu Dec 13 12:56:33 2007 +0100
+ add 'terminal program' functionality
- Introduce map_physmem() and unmap_physmem()
+ This patch adds a 'cu' like serial terminal command to u-boot
+ using which you can access other serial ports from the system console.
- map_physmem() returns a virtual address which can be used to access a
- given physical address without involving the cache. unmap_physmem()
- should be called when the virtual address returned by map_physmem() is
- no longer needed.
+ OpenMoko uses this in their Neo1973 phones to get access to the GSM
+ Modem and GPS chip from the bootloader.
- This patch adds a stub implementation which simply returns the
- physical address cast to a uchar * for all architectures except AVR32,
- which converts the physical address to an uncached virtual mapping.
- unmap_physmem() is a no-op on all architectures, but if any
- architecture needs to do such mappings through the TLB, this is the
- hook where those TLB entries can be invalidated.
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Dec 19 14:12:53 2007 +0100
-commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Thu Dec 13 12:56:32 2007 +0100
+ Re-introduce the 'nand read.oob' and 'nand write.oob' commands
+ that used to exist with the legacy NAND code
- cfi_flash: Introduce read and write accessors
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
- Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
- them to access the flash memory. This makes it clearer when the flash
- is actually being accessed; merely dereferencing a volatile pointer
- looks just like any other kind of access.
+commit f540c42d9564854b19ce9bbb70affe172529fe70
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Dec 19 14:09:58 2007 +0100
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ Fix building with CRAMFS but not JFFS2 support
-commit 812711ce6b3a386125dcf0d6a59588e461abbb87
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Thu Dec 13 12:56:31 2007 +0100
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
- Implement __raw_{read,write}[bwl] on all architectures
+commit 23d0baf967fecdaf1804f045f6339337c5607eec
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 22 15:52:58 2007 +0100
- This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
- m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
- from Linux.
+ Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Sat Oct 6 18:55:36 2007 +0200
+commit 23776ff292966a85d811126933830bed48211826
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Dec 11 10:53:12 2007 +0100
- cfi_flash: Reorder functions and eliminate extra prototypes
+ ARM: support board-specific ethernet PHY init
- Reorder the functions in cfi_flash.c so that each function only uses
- functions that have been defined before it. This allows the static
- prototype declarations near the top to be eliminated and might allow
- gcc to do a better job inlining functions.
+ Add until the new phylib will be arrived
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Thu Dec 13 12:56:29 2007 +0100
+commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 8 16:34:08 2007 +0100
- cfi_flash: Make some needlessly global functions static
+ IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
- Make functions not declared in any header file static.
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Dec 9 11:01:10 2007 +0100
-commit 7e5b9b471518c5652febc68ba62b432193d6abf4
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Thu Dec 13 12:56:28 2007 +0100
+ Add missing file in gitignore and comments
- cfi_flash: Break long lines
+ based on Linux source tree's .gitignore files
- This patch tries to keep all lines in the cfi_flash driver below 80
- columns. There are a few lines left which don't fit this requirement
- because I couldn't find any trivial way to break them (i.e. it would
- take some restructuring, which I intend to do in a later patch.)
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 9 11:36:21 2008 +0100
-commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
-Author: Bartlomiej Sieka <tur@semihalf.com>
-Date: Tue Dec 11 13:59:57 2007 +0100
+ Coding Style cleanup, update CHANGELOG
- CFI: synchronize command offsets with Linux CFI driver
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
- Fixes non-working CFI Flash on the Inka4x0 board.
+commit b2e2142c500c48a57f18f9dd30e66c13caea0971
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 9 10:38:58 2008 +0100
- Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ POST: Execute SPR test after relocation
-commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Fri Dec 7 12:17:34 2007 -0600
+ On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
+ self modifying code and this doesn't work with stack in d-cache, since
+ I can't move the code from d-cache to i-cache. We move the SPR test to
+ be executed a little later, after relocation. Then stack is located in
+ SDRAM and this self-modifying code is no problem anymore.
- Handle MPC85xx PCIe reset errata (PCI-Ex 38)
+ Signed-off-by: Stefan Roese <sr@denx.de>
- On the MPC85xx boards that have PCIe enable the PCIe errata fix.
- (MPC8544DS, MPC8548CDS, MPC8568MDS).
+commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 9 10:28:20 2008 +0100
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
-commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Fri Dec 7 12:04:30 2007 -0600
+ This patch configures the LWMON5 port to use d-cache as init-ram and
+ the unused GPT0_COMP6 as POST WORD storage.
- Update Freescale MPC85xx ADS/CDS/MDS board config
+ Signed-off-by: Stefan Roese <sr@denx.de>
- * Enabled CONFIG_CMD_ELF
+commit 1754f50b710194f886b6f2831803d8960171a14d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 9 10:25:46 2008 +0100
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
-commit d435793229ce29a42797c1edc39f5b34f987f91a
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Fri Dec 7 04:59:26 2007 -0600
+ The privious 4xx POST implementation only supported storing the POST
+ WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
+ we need to store the POST WORD in some other non volatile location.
+ This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
+ a location.
- Handle Asynchronous DDR clock on 85xx
+ Signed-off-by: Stefan Roese <sr@denx.de>
- The MPC8572 introduces the concept of an asynchronous DDR clock with
- regards to the platform clock.
+commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 9 10:23:16 2008 +0100
- Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
- mode.
+ ppc4xx: Add 44x cache locking to better support init-ram in d-cache
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ This patch adds support for locking the init-ram/stack in d-cache,
+ so that other regions may use d-cache as well
-commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Thu Nov 29 10:34:28 2007 -0600
+ Note, that this current implementation locks exactly 4k of d-cache,
+ so please make sure that you don't define a bigger init-ram area. Take
+ a look at the lwmon5 440EPx implementation as a reference.
- Update Freescale MPC85xx ADS/CDS/MDS board config
+ Signed-off-by: Stefan Roese <sr@denx.de>
- * Removed some misc environment setup
- * Enabled CONFIG_CMDLINE_EDITING
+commit 0ddb89601a8d29e808db450366752ffdc6267c53
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 9 10:16:33 2008 +0100
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Fix memset bug in ext2fs_read_file()
-commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Thu Nov 29 10:47:44 2007 -0600
+ ext2fs_read_file() had the function arguments swapped.
- Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
+ Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
- Minor path corrections needed to ensure buildability.
-
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
-commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Thu Nov 29 10:16:18 2007 -0600
+commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Tue Jan 5 08:17:15 1988 +0100
- Move the MPC8540 ADS board under board/freescale.
+ Fix problems with usb storage devices on MPC5200 /TQM5200
- Minor path corrections needed to ensure buildability.
+ The MPC5200 OHCI controller operates in big endian, so
+ CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
-commit 870ceac5b3a3486c109396e005af81ae762b5710
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Thu Nov 29 10:14:50 2007 -0600
+commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jan 8 22:58:27 2008 +0100
- Move the MPC8560 ADS board under board/freescale.
+ Fix compile problem with new env code.
- Minor path corrections needed to ensure buildability.
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+commit 64b3727b9779d86127cd576e392a987de5ebb9fd
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Tue Nov 27 10:23:20 2007 +0100
-commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Thu Nov 29 10:13:47 2007 -0600
+ tools: fix fw_printenv tool to compile again
- Move the MPC8568 MDS board under board/freescale.
+ This patch updates the fw_printenv/fw_setenv userspace tool to include
+ the correct MTD header in order to compile against current kernel
+ headers. Backward compatibility is preserved by introducing an option
+ MTD_VERSION which can be set to "old" for compilation using the old MTD
+ headers. Along with this a number of warnings are fixed.
- Minor path corrections needed to ensure buildability.
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Jan 8 15:40:09 2008 +0100
-commit a853d56c59b33415304531443633808736acfc6e
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Thu Nov 29 02:18:59 2007 -0600
+ ppc4xx: assign PCI interrupts on seuqoia boards
- Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
+ Some operating systems rely on assigned PCI interrupts.
- We already had defines for LAWAR_TRGT_IF_* that we should use
- rather than creating new ones. Also, added some missing defines for
- PCIE targets.
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Jan 8 15:50:49 2008 +0100
-commit 04db400892da37b76a585e332a0c137954ad2015
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Thu Nov 29 02:10:09 2007 -0600
+ ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
- Stop using immap_t on 85xx
+ This patch allows the use of 4xx interrupt vector number defines
+ in board specific code outside cpu/ppc4xx.
- In the future the offsets to various blocks may not be in same location.
- Move to using CFG_MPC85xx_*_ADDR as the base of the registers
- instead of getting it via &immap.
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Jan 8 15:39:01 2008 +0100
-commit 2714223f8e04ab3e4133ff65872eef366d90bfea
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Thu Nov 29 01:23:09 2007 -0600
+ ppc4xx: Fix UIC2 vector number base
- Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Jan 8 12:49:58 2008 +0100
-commit c480861bf000156e6a3e932c258db59ff2212dd3
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Thu Nov 29 01:06:19 2007 -0600
+ ppc4xx: Update PLB/PCI divider for PMC440 board
- Update MPC8568 MDS to use libfdt
+ This patch updates the PLB/PCI divider when running at
+ 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
- Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
- ethernet, pci, and serial for the various fixups that are done.
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Jan 8 11:13:09 2008 +0100
-commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
-Author: Haiying Wang <Haiying.Wang@freescale.com>
-Date: Wed Nov 14 15:52:06 2007 -0500
+ ppc4xx: Disable error message when no NAND chip is installed on PMC440
- Add PCI Express support on MPC8568MDS
+ Add CFG_NAND_QUIET_TEST option to disable error message when
+ no NAND chip is installed on PMC440 boards.
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Disable a couple of config defines that are only used for NAND_U_BOOT.
-commit b90d25497625b90ffa3f2911a0895ca237556ff5
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Thu Nov 29 00:11:44 2007 -0600
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- Update MPC85xx CDS to use libfdt
+commit ad3006fe7e84667021753b74247b0bafd97ba35f
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Mon Jan 7 23:47:32 2008 -0500
- Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
- ethernet, pci, and serial for the various fixups that are done.
+ LIBFDT: use memmove() instead of memcpy()
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ This is partial patch from the DTC/libfdt
+ commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
+ Author: David Gibson <david@gibson.dropbear.id.au>
+ Date: Wed Nov 21 11:56:14 2007 +1100
-commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Wed Nov 28 22:54:27 2007 -0600
+ The patch also fixes one genuine bug caught by valgrind -
+ _packblocks() in fdt_rw.c was using memcpy() where it should have been
+ using memmove().
- Update MPC8540 ADS to use libfdt
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
- ethernet, pci, and serial for the various fixups that are done.
+commit aec7135bc300e3340d18f203347ee00c5b5f68c0
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Dec 17 14:42:07 2007 +1100
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ libfdt: Add more documentation (patch the seventh)
-commit 5ce715802f6c50dc78b3405b92f184b1e3710519
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Wed Nov 28 22:40:31 2007 -0600
+ This patch adds more documenting comments to libfdt.h. Specifically,
+ these document the read/write functions (not including fdt_open_into()
+ and fdt_pack(), for now).
- Update MPC8560 ADS to use libfdt
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
- ethernet, pci, and serial for the various fixups that are done.
+commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Dec 17 14:41:52 2007 +1100
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ libfdt: Add more documentation (patch the sixth)
-commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Wed Nov 28 00:36:33 2007 -0600
+ This patch adds some more documenting comments to libfdt.h.
+ Specifically this documents all the write-in-place functions.
- Stop using immap_t for cpm offset on 85xx
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- In the future the offsets to various blocks may not be in same location.
- Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
- instead of getting it via &immap->im_cpm.
+commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Dec 29 22:45:27 2007 -0500
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Fine grained per property /chosen updating.
-commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Tue Nov 27 23:25:02 2007 -0600
+ Implement a suggestion by Scott Wood to make the /chosen handling fine
+ grained. Don't overwrite pre-existing properties on a per-property basis,
+ so if /chosen exists but a necessary /chosen/property doesn't, it gets
+ created. If a /chosen property exists, it is NOT overwritten unless the
+ "force" flag is true.
- Stop using immap_t for guts offset on 85xx
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- In the future the offsets to various blocks may not be in same location.
- Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
- instead of getting it via &immap->im_gur.
+commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Jan 5 15:33:29 2008 -0500
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Improve the FDT help message.
-commit 50c03c8cf494d91cdec39670d95337c743e16ec9
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Tue Nov 27 22:42:34 2007 -0600
+ Add a note that "fdt copy" makes the new address active.
+ Remove most of the extra hints at the end of the fdt help.
- Update MPC8544 DS config
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
- * Removed some misc environment setup
- * Moved to using fdtfile & fdtaddr as fdt env var names
- * Enabled CONFIG_CMDLINE_EDITING
+commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Jan 5 14:52:04 2008 -0500
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Support setting FDT properties with optional values.
-commit addce57e2e4c49e77ffb2020a84690713bb18b47
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Mon Nov 26 17:12:24 2007 -0600
+ Fix a bug found and documented by Bartlomiej Sieka where the optional
+ value on "fdt set <path> <prop> [<val>]" wasn't optional.
- Update MPC8544DS to use libfdt
+ => fdt mknode / testnode
+ => fdt print /testnode
+ testnode {
+ };
+ => fdt set /testnode testprop
+ => fdt print /testnode
+ testnode {
+ testprop;
+ };
- Updated the MPC8544DS config to use libfdt and assume use of aliases for
- ethernet, pci, and serial for the various fixups that are done.
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+commit 22fb2246df91bfc840d87f0c5910818bad55577a
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 28 11:56:30 2007 +0100
-commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Thu Nov 29 00:15:30 2007 -0600
+ Add fdt_find_and_setprop() to fdt_support.h
- Add libfdt based ft_cpu_setup for mpc85xx
+ fdt_find_and_setprop() is used by several 4xx boards and it's
+ missing in the appropriate header. This patch eliminates a
+ warning when building U-Boot for such boards.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Acked-by: Stefan Roese <sr@denx.de>
-commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
+commit 802b769bac17b0560d3535a42c502469ee190cd1
Author: Stefan Roese <sr@denx.de>
-Date: Sat Dec 8 08:25:09 2007 +0100
+Date: Tue Jan 8 18:39:30 2008 +0100
- CFI: Coding style cleanup
+ ppc4xx: Return 0 on success in 4xx ethernet driver
Signed-off-by: Stefan Roese <sr@denx.de>
-commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
-Author: Michael Schwingen <michael@schwingen.org>
-Date: Fri Dec 7 23:35:02 2007 +0100
+commit 6775c68683a53c7abc778774641aac6f833a2cbf
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jan 8 09:59:49 2008 -0600
- CFI: support JEDEC flash roms in CFI-flash framework
+ mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
- The following patch adds support for non-CFI flash ROMS, by hooking into the
- CFI flash code and using most of its code, as recently discussed here in the
- thread "Mixing CFI and non-CFI flashs".
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- Signed-off-by: Michael Schwingen <michael@schwingen.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
+commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Dec 20 16:28:34 2007 -0600
-commit c01b17dd856fa120b2970f50d9598546a4927ec3
-Author: Gerald Van Baren <vanbaren@cideas.com>
-Date: Wed Nov 28 21:24:50 2007 -0500
+ mpc83xx: rm remaining FLAT_TREE code
- Conditionally compile fdt_fixup_ethernet()
+ ..in board pci.c files
- Fix compiler warnings: On boards that don't have ethernets defined,
- don't compile fdt_fixup_ethernet().
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
-commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Tue Nov 27 21:59:46 2007 -0600
+commit b3458d2cd55d01732e30a76d898afd99e871cd67
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Dec 20 15:57:28 2007 -0600
- Convert boards that set memory node to use fdt_fixup_memory()
+ mpc83xx: remove FLAT_TREE code
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ need to rm it from pci code, too!
-commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Mon Nov 26 17:06:15 2007 -0600
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
+commit 5b8bc606c61456566af6912f818a153b6b06f242
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Dec 20 14:09:22 2007 -0600
- We use a combination of the serialN alias and CONFIG_CONS_INDEX to
- determine which serial alias we should set linux,stdout-path to.
+ mpc83xx: convert to using do_fixup_*()
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ convert to using simpler mpc85xx style fdt update code; streamline by
+ eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
+ the old school FLAT_TREE code from 83xx (since the sbc8349 was just
+ converted over to using libfdt).
-commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Mon Nov 26 14:57:45 2007 -0600
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- Add common memory fixup function
+commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Dec 20 12:58:51 2007 -0500
- Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
+ sbc8349: enable libfdt by default on WRS SBC8349 board.
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Make libfdt the default for the WRS SBC8349 board.
+ Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
+ done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
-commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Mon Nov 26 11:19:12 2007 -0600
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- Conditionally compile fdt_support.c
+commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Dec 20 12:58:16 2007 -0500
- Modify common/Makefile to conditionally compile fdt_support.c based
- on CONFIG_OF_LIBFDT.
+ sbc8349: migrate board to libfdt
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ This adds libfdt support code for the Wind River sbc8349 board.
-commit d88e7ba0980773479e1a64badb293116071b7ef0
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Mon Nov 26 10:41:40 2007 -0600
+ Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
+ the other Freescale 83xx boards.
- Fix build breakage due to libfdt import
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- The IDS8247 got lost in the update and need an API update
- do to rename of functions in libfdt.
+commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Dec 20 12:56:19 2007 -0500
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ sbc8349: Remove board specific ECC code
-commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
-Author: Gerald Van Baren <vanbaren@cideas.com>
-Date: Fri Nov 23 19:43:20 2007 -0500
+ ECC code is now shared for all 83xx boards, so remove board specific one.
+ See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
- Add spaces around the = in the fdt print format.
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Dec 20 01:30:48 2007 -0600
-commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
-Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-Date: Fri Dec 7 01:25:38 2007 +0900
+ mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
- sh: Moved driver of the SuperH dependence
+ continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
- The composition of the directory in the drivers/ changed.
- I moved SuperH serial driver and marubun PCMCIA driver.
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+commit ccf21c311e68d48399eff1e72936052885f6e3f7
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Thu Dec 6 16:43:40 2007 +0100
-commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
-Author: Wolfgang Denk <wd@denx.de>
-Date: Thu Dec 6 10:21:19 2007 +0100
+ Add support CONFIG_UEC_ETH3 in MPC83xx
- Release v1.3.1
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit e6af9932d31171e35db880e7b2f29f903b1b7660
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 11:00:54 2007 -0600
-commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
-Author: Wolfgang Denk <wd@denx.de>
-Date: Thu Dec 6 10:21:03 2007 +0100
+ Remove CONFIG options related to OF that we dont use
- ADS5121 Board: fix compile problem.
+ The MPC8360E MDS config defined:
+ CONFIG_OF_HAS_BD_T
+ CONFIG_OF_HAS_UBOOT_ENV
- Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Which we don't use or ever needed. This seems like copy-paste feature creep.
-commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
-Author: Wolfgang Denk <wd@denx.de>
-Date: Mon Dec 3 00:15:28 2007 +0100
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
- Prepare for 1.3.1-rc1
+commit f602082b4b7ed4ee16432067cc67a0a24fedc715
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Dec 10 14:16:22 2007 -0600
- Signed-off-by: Wolfgang Denk <wd@denx.de>
+ mpc83xx: supress compiler warning
-commit 260eea5676ca46903a335686cc020b29c4ca46fe
-Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-Date: Thu Nov 29 01:21:54 2007 +0900
+ mpc8360emds.c: In function ‘ft_board_setup’:
+ mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
+ mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
- sh: Add SuperH boards maintainer to MAINTAINERS file
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
+commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Nov 27 14:17:29 2007 -0600
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ mpc83xx: fix remaining fdt_find_node_by_path references
-commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
-Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-Date: Thu Nov 29 00:13:04 2007 +0900
+ rename to fdt_path_offset
- sh: Add ms7750se support in MAKEALL
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+commit 921d4b19ad1be704df58725485d9292dc0414adf
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Nov 19 12:30:09 2007 -0600
-commit c7144373427a178332bf9754131c8c34c52c200a
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Tue Nov 27 09:44:53 2007 +0100
+ mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
- sh: Add sh3 and sh4 support in MAKEALL
+ Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
+ This change guarantees that the environment will be located on the
+ first flash sector after the U-Boot image.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
-commit 130080874a3d28450098481a262c5f7c855e908d
-Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-Date: Sun Nov 25 02:51:17 2007 +0900
+commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Nov 9 14:28:08 2007 -0600
- sh: Add document for SuperH.
+ mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
- This document is a summary of information concerning SuperH of U-Boot.
+ u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
+ properties in the device tree so the PHY gets configured for internal delay on
+ RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
-commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
-Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-Date: Sun Nov 25 02:39:31 2007 +0900
+commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Sep 18 12:41:15 2007 +0800
- sh: Add marubun's pcmcia driver
+ mpc83xx: update the CREDITS and MAINTAINERS
- Marubun pcmcia is a chip for PCMCIA used with SuperH.
- Of course, this can be used even by other architectures.
- When use this driver, came to be able to use CompactFlash
- and Ethernet.
+ update the CREDITS and MAINTAINERS.
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
-commit febd86b969b975289ed948f1ac0eb9722da41ced
-Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-Date: Sun Nov 25 02:32:13 2007 +0900
+commit b21add4b42af7b767448251b599b91066a160e0d
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Sep 18 12:40:21 2007 +0800
- sh: Update SuperH SCIF driver
+ mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
- - Changed volatile unsigned to vu_.
- - Changed Makefile for kconfig.
+ Add the MAINTAINER and MAKEALL entries for mpc837xemds
- Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
-commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
-Author: Wolfgang Denk <wd@denx.de>
-Date: Mon Nov 26 19:18:21 2007 +0100
+commit f8900ce9094c462355eb792eea264ff16ac8fd16
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Sep 18 12:38:53 2007 +0800
- Cleanup coding style; update CHANGELOG
+ mpc83xx: Add the MPC837xEMDS board readme
- Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Add the README.mpc837xemds to /doc
-commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Sun Nov 25 22:39:25 2007 +0100
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
- MAKEALL: add missing 512x boards in ppc
+commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Sep 18 12:37:57 2007 +0800
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ mpc83xx: Add the support of MPC837xEMDS board
-commit a340c325e668ca7386c2276387681720be9c3757
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Sun Nov 25 18:45:47 2007 +0100
+ The MPC837xEMDS board support:
+ * DDR2 400MHz hardcoded and SPD init
+ * Local bus NOR Flash
+ * I2C, UART, MII and RTC
+ * eTSEC RGMII
+ * PCI host
- Makefile : fix tags ctags etags with new drivers organization
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+commit 555da61702771fe0f76f3de23b4e7590f3704161
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Sep 18 12:36:58 2007 +0800
-commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Sun Nov 25 18:45:47 2007 +0100
+ mpc83xx: Add the support of MPC8315E SoC
- Makefile : fix tags ctags etags with new drivers organization
+ The MPC8315E SoC including e300c3 core and new IP blocks,
+ such as TDM, PCI Express and SATA controller.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
-commit 59829cc189378c142c13d2aa8d9a897d8bef3961
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Sat Nov 24 21:26:56 2007 +0100
+commit 03051c3d35c9981ceaa059005660e699f3eacf1c
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Sep 18 12:36:11 2007 +0800
- drivers/mtd : move mtd drivers to drivers/mtd
+ mpc83xx: Add the support of MPC837x SoC
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ The MPC837x SoC including e300c4 core and new IP blocks,
+ such as SDHC, PCI Express and SATA controller.
-commit 318c0b90431f2648552e5ade78833f42652ce859
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Sat Nov 24 21:17:55 2007 +0100
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
- drivers/misc : move misc drivers to drivers/misc
+commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Nov 14 18:54:53 2007 +0300
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ MPC8360E-MDS: configure and enable second UART
-commit 33daf5b7858807cb4ce4158c2c56524671c14c08
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Sat Nov 24 21:13:59 2007 +0100
+ Despite user manual, BCSR9.7 is negated (high) on HRST, so
+ UART2 is disabled. Fix that and configure QE pins properly.
- drivers/block : move block drivers to drivers/block
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+commit b2893e1fcb28fad8c8b317104df8cee0142c7631
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Nov 5 09:34:06 2007 -0600
-commit 0c698dcaa70275eb8814f665b545547cee013892
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Sat Nov 24 20:59:50 2007 +0100
+ 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
- drivers/rtc : move rtc drivers to drivers/rtc
+ Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
+ currently-defined 83xx boards. This change guarantees that the environment
+ will be located on the first flash sector after the U-Boot image.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
-commit f868cc5a50757d94f36c312395481cb0f187d9e6
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Sat Nov 24 20:14:44 2007 +0100
+commit e05329516a13616b53240cd85b739217c2bf87f1
+Author: Larry Johnson <lrj@acm.org>
+Date: Fri Jan 4 13:27:02 2008 -0500
- drivers/hwmon : move hardware monitor drviers to drivers/hwmon
+ ppc4xx: Remove weak binding from common Denali data-eye search code
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Now that there are no board-specific versions of
+ "denali_core_search_data_eye()", the weak binding on the common version
+ can be removed.
-commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Sat Nov 24 19:46:45 2007 +0100
+ Signed-off-by: Larry Johnson <lrj@acm.org>
- drivers/input : move input drivers to drivers/input
+commit 5ba576c01602fd328800a427964c36a0a05c5dce
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 5 09:13:46 2008 +0100
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
-commit e4558666293364fc3af1c1d9381ca933fa0f1275
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Sat Nov 24 19:40:11 2007 +0100
+ Signed-off-by: Stefan Roese <sr@denx.de>
- drivers/usb : move usb drivers to drivers/usb
+commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 5 09:12:41 2008 +0100
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
-commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Sat Nov 24 19:33:38 2007 +0100
+ On Katmai the complete auto-calibration somehow doesn't seem to
+ produce the best results, meaning optimal values for RQFD/RFFD.
+ This was discovered by GDA using a high bandwidth scope,
+ analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
+ so now on Katmai "only" RFFD is auto-calibrated.
- drivers/serial : move serial drivers to drivers/serial
+ This patch also adds RDCC calibration as mentioned on page 7 of
+ the AMCC PowerPC440SP/SPe DDR2 application note:
+ "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Wed Nov 21 21:19:24 2007 +0100
+commit 49db47b8ae6afff2b898be312948ff501357dc80
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Jan 2 16:48:42 2008 +0100
- drivers/net : move net drivers to drivers/net
+ ppc4xx: Remove sdram.h from PMC440 board
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-commit 352d259130b349fe9593b8dada641bd78a9659e5
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Tue Nov 20 20:41:48 2007 +0100
+commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Jan 2 16:48:34 2008 +0100
- drivers/video : move video drivers to drivers/video
+ ppc4xx: use common denali core defines and data eye search code for PMC440
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-commit 73646217186aa17afc8e305c5f06f06dd335eaad
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Tue Nov 20 20:33:09 2007 +0100
+commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Jan 2 12:05:14 2008 +0100
- drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
+ ppc4xx: More cleanup for esd's LCD code
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Tue Nov 20 20:28:09 2007 +0100
+commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 4 12:00:01 2008 +0100
- drivers/pci : move pci drivers to drivers/pci
+ ppc4xx: Fix Sequoia NAND booting target
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ The Sequoia NAND booting target now uses the recently extracted
+ cpu/ppc4xx/denali_data_eye.c file too.
-commit 9162352817579840d7802da6d85872b3ca003c97
-Author: Gerald Van Baren <vanbaren@cideas.com>
-Date: Thu Nov 22 17:23:23 2007 -0500
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Fix fdt printing for updated libfdt
+commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
+Author: Lawrence R. Johnson <lrj@acm.org>
+Date: Thu Jan 3 15:02:02 2008 -0500
- Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
+ ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
- Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+ Signed-off-by: Larry Johnson <lrj@acm.org>
-commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Wed Nov 21 13:30:15 2007 -0600
+commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
+Author: Lawrence R. Johnson <lrj@acm.org>
+Date: Fri Jan 4 02:11:56 2008 -0500
- Add additional fdt fixup helper functions
+ ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
- Added the following fdt fixup helpers:
- * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
- * do_fixup_by_compat{_u32} - Find matching nodes by compat
+ Note: this patch changes the configuration of some GPIO registers:
- The _u32 variants work the same only the property they are setting
- is know to be a 32-bit integer instead of a byte buffer.
+ Register Old Value New Value
+ --------------- ---------- ----------
+ DCR GPIO0_TCR 0x0000000F 0x0000F0CF
+ DCR GPIO0_TSRH 0x55005000 0x00000000
+ DCR GPIO1_TCR 0xC2000000 0xE2000000
+ DCR GPIO1_TSRL 0x0C000000 0x00200000
+ DCR GPIO1_ISR2L 0x00050000 0x00110000
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Larry Johnson <lrj@acm.org>
-commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Wed Nov 21 11:11:03 2007 -0600
+commit 5ab884b254ca2e707ab50545cd705f30108cf491
+Author: Lawrence R. Johnson <lrj@acm.org>
+Date: Thu Jan 3 18:54:00 2008 -0500
+
+ ppc4xx: Add functionality to GPIO support
+
+ This patch makes two additions to GPIO support:
+
+ First, it adds function gpio_read_in_bit() to read the a bit from the
+ GPIO Input Register (GPIOx_IR) in the same way that function
+ gpio_read_out_bit() reads a bit from the GPIO Output Register
+ (GPIOx_OR).
+
+ Second, it modifies function gpio_set_chip_configuration() to provide
+ an additional option for configuring the GPIO from the
+ "CFG_4xx_GPIO_TABLE".
+
+ According to the 440EPx User's Manual, when an alternate output is used,
+ the three-state control is configured in one of two ways, depending on
+ the particular output. The first option is to select the corresponding
+ alternate three-state control in the GPIOx_TRSH/L registers. The second
+ option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
+ the GPIOx_TRSH/L registers, and set the corresponding bit in the
+ GPIOx_TCR register to enable the output. For example, the Manual
+ specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
+ the alternate three-state control (first option), and specifies
+ configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
+ enabled in the GPIOx_TCR register (second option).
+
+ Currently, gpio_set_chip_configuration() configures all alternate signal
+ outputs to use the first option. This patch allow the second option to
+ be selected by setting the "out_val" element in the table entry to
+ "GPIO_OUT_1". The first option is used when the "out_val" element is
+ set to "GPIO_OUT_0". Because "out_val" is not currently used when an
+ alternate signal is selected, and because all current GPIO tables set
+ "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
+ not change any existing configurations.
- Add fdt_fixup_ethernet helper to set mac addresses
+ Signed-off-by: Larry Johnson <lrj@acm.org>
- Added a fixup helper that uses aliases to set mac addresses
- in the device tree based on the bd_t
+commit 196404cdc1de495d6182e84731c200fc5748df15
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sun Dec 30 01:01:54 2007 -0500
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ PPC4xx: Remove sdram.h from board/lwmon5
-commit dbaf07ce620aab249e3502b20a986234a6af1d3a
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Wed Nov 21 14:07:46 2007 -0600
+ These definitions are now in "include/ppc440.h".
- Fix warnings from import of libfdt
+ Signed-off-by: Larry Johnson <lrj@acm.org>
- cmd_fdt.c: In function fdt_print:
- cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
- cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
- cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
- cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
+commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sun Dec 30 01:01:32 2007 -0500
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ PPC4xx: Use common code for LWMON5 board SDRAM support
-commit 8d04f02f6224e6983f4812ea4da704950ec8539c
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Wed Oct 24 11:04:22 2007 -0500
+ This patch also modifies the functionality of the code so that the data-eye
+ search is now done with with the cache disabled.
- Update libfdt from device tree compiler (dtc)
+ Signed-off-by: Larry Johnson <lrj@acm.org>
- Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
- the device tree compiler (dtc) project.
+commit 62cc3951ab72135d9c101f1845b794e63a0fa189
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sun Dec 30 01:01:14 2007 -0500
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ PPC4xx: Remove sdram.h from board/amcc/sequoia
-commit e93becf80d732b64aef81b23e8b6ece02c40533d
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Sat Nov 3 19:46:28 2007 -0500
+ These definitions are now in "include/ppc440.h".
- Move do_fixup* for libfdt into common code
+ Signed-off-by: Larry Johnson <lrj@acm.org>
- Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
- into common/fdt_support.c and renamed:
+commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sun Dec 30 01:00:50 2007 -0500
- do_fixup() -> do_fixup_by_path()
- do_fixup_u32() -> do_fixup_by_path_u32()
+ PPC4xx: Use common code for Sequoia board SDRAM support
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Larry Johnson <lrj@acm.org>
-commit f738b4a75998f42a7408defadc9baac7a31c92db
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Thu Oct 25 16:15:07 2007 -0500
+commit 8b0c5c127690335758100c25eaec2b84db97c101
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 16:58:41 2007 +0100
- Make no options to fdt print default to '/'
+ net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
+ networking stack does not automatically switch to
+ another interface. This patch does not touch the default
+ behavior.
-commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Wed Oct 24 10:21:57 2007 -0500
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
+commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
+Author: Upakul Barkakaty <upakul@gmail.com>
+Date: Thu Nov 29 12:16:13 2007 +0530
- Removed:
- fdt_node_is_compatible
- fdt_find_node_by_type
- fdt_find_compatible_node
+ NET: Proper return code handling in eth_init() function in file eth.c
- To ease merge of newer libfdt as we aren't using them anywhere at this time.
+ This patch modifies the return code handling in the eth_init()
+ function, to be compatible with the handling of the return codes in
+ the other network stack files. It now returns a 0 on Success and -1 on
+ error.
- Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
- reason.
+ Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+commit 5ca2d0953e4579a80810966cca2077e20d912c97
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Mon Nov 19 20:27:04 2007 +0900
-commit 98e2867cc85409b919f862e6c16026461ec955df
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Wed Nov 21 09:19:37 2007 -0700
+ net/eth.c: Fix env_enetaddr signed overflow
- [BUILD] Remove libraries when updating autoconf.mk
+ Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
+ warned as below:
- Fix library problems caused by conditional compilation. Using
- autoconf.mk to decide which files to compile has caused a problem when
- changing configuration from one board to another without clearing out
- the library (*.a) files.
+ U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
- It used to be that the linker was always passed the same list of .o
- files when building the .a files. However, that is not longer true
- with conditional compilation. Now, a different board config will have
- a different file list passed to the linker. The problem occurs when
- a library has already been built and the board config is changed.
+ DRAM: 256 MB
+ Flash: 32 MB
+ In: serial
+ Out: serial
+ Err: serial
+ Net: NEC-Candy
+ Warning: NEC-Candy MAC addresses don't match:
+ Address in SROM is 00:00:4C:80:92:A2
+ Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
- Since the linker will update instead of replace a preexisting library,
- then if the file list changes to remove some object files the old
- objects will still exist in the library.
+ This patch changes env_enetaddr type from `char' to `unsigned char'.
- The solution is to remove all old library files when autoconf.mk is
- made.
+ Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+commit f85b60710571b37293d2233933b76e2aa3db5635
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Thu Dec 27 18:19:02 2007 +0100
-commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Wed Nov 21 08:49:50 2007 -0600
+ Introduce new eth_receive routine
- [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
+ The purpose of this routine is receiving a single network frame, outside of
+ U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
+ U-Boot will let them utilise networking facilities. For sending a raw frame
+ the already existing eth_send() can be used.
- Modify libfdt/Makefile to conditionally compile the *.c files based
- on the board config.
+ The direct consumer of this routine is the newly introduced API layer for
+ external applications (enabled with CONFIG_API).
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
-commit 4a43719a7738712811d822ca8125427b27a55cdc
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Mon Sep 24 09:05:31 2007 -0600
+commit 5c740711f0ea5b51414b341b71597c4a0751be74
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Jan 3 10:41:04 2008 -0600
- [BUILD] conditionally compile common/cmd_*.c in common/Makefile
+ 8610: Move include of config.h earlier.
- Modify common/Makefile to conditionally compile the cmd_*.c files based
- on the board config.
+ Include config.h earlier in the set of #includes
+ so as to avoid a incidental and duplicate definition
+ of CFG_CACHELINE_SIZE.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Signed-off-by: Jon Loeliger
-commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Mon Sep 24 09:05:31 2007 -0600
+commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Dec 4 10:53:34 2007 -0600
- [BUILD] Generate include/autoconf.mk from board config files
+ Don't slam #undef DEBUG in the 8641HPCN config file.
- Use cpp and sed to postprocess config.h and import the defined values
+ Doing so prevents it from being individually set
+ and useful in other files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Nov 28 14:47:18 2007 -0600
+
+ Convert MPC8641HPCN to use libfdt.
+
+ Assumes the presence of the aliases node in the DTS to
+ locate the ethernet, pci and serial nodes for fixups.
+
+ Use consistent fdtaddr and fdtfile in environment variables.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ce37422d0002e10490e268392e0c4e3028e52cec
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 2 14:06:26 2008 +0100
+
+ cfi_flash: Fix bug in flash_isset() to use correct 32bit function
+
+ This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
+ flash chips connected to a 32bit wide port.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 2 15:58:44 2008 +0100
+
+ Fix compile problem introduced by "cleanup" commit 3dfd708c
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 2 15:54:45 2008 +0100
+
+ Make scripts and Makefiles POSIX compliant
+
+ The bash builtin versions of the "test" (resp. "[") command allow
+ using "==" for string comparisons, but POSIX compatible implemen-
+ tations (like /usr/bin/test) insist on using "=" only. On such systems
+ you will see:
+
+ $ /usr/bin/test a == a && echo OK
+ /usr/bin/test: ==: binary operator expected
+
+ This patch fixes Makefiles and scripts to use POSIX style.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 2 12:38:43 2008 +0100
+
+ Minor coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e174ac34adf5d5653df12bc3cf19c52063a71269
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 28 17:29:56 2007 +0100
+
+ ppc4xx: Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 28 17:07:24 2007 +0100
+
+ ppc4xx: Complete PMC440 board support
+
+ This patch brings the PMC440 board configuration file.
+ Finally it enables the PMC440 board support.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 407843a582560fc5231299561ab3c2b6b6cd3397
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 28 17:07:18 2007 +0100
+
+ ppc4xx: Add FPGA support and BSP commands for PMC440 boards
+
+ This patch adds some BSP commands and FPGA booting support
+ for esd's PMC440 boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 28 17:07:14 2007 +0100
+
+ ppc4xx: Add initial esd PMC440 board files
+
+ This patch adds the first files for the new esd PMC440 boards.
+ The next two patches will complete the PMC440 board support.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 28 17:10:36 2007 +0100
+
+ ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
+
+ - add EEPROM write protection for esd PLU405 boards.
+ - initialize NAND GPIOs
+ - use correct io accessors
+ - cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 77660c4b59055d621d2a8595bd4c18bb277268fc
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 28 17:10:44 2007 +0100
+
+ ppc4xx: use correct io accessors for esd's LCD code
+
+ This patch fixes esd's LCD dectection code to work correctly with
+ newer gcc versions.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 28 17:10:42 2007 +0100
+
+ ppc4xx: Maintenance patch for VOH405 boards
+
+ - add EEPROM write protection
+ - initialize NAND GPIOs
+ - use correct io accessors
+ - slow down I2C clock to 100kHz
+ - enable ext. I2C bus
+ - cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit c05569066dbcba3fdf36d4d1943df265dc316a86
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 28 16:08:08 2007 +0100
+
+ ppc4xx: Enable 405EP PCI arbiter per default on all boards
+
+ In an attmemt to clean up the 4xx start.S file, I removed the enabling
+ of the internal 405EP PCI arbiter. This is needed for multiple other
+ 405EP platforms, like most of the esd 405EP. Now the internal PCI
+ arbiter is enabled again per default as it has been before.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 28 15:53:46 2007 +0100
+
+ ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 28 06:06:04 2007 +0100
+
+ ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
+
+ Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
+ platforms mentioned above.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b568fd25574181a3b12ae3d66b2913903442cb83
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Dec 27 17:03:46 2007 +0100
+
+ Remove CPCI440 board
+
+ This board never left prototyping state and it
+ became a millstone round my neck. So remove it.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit c591dffe0cbacd896ccbad06011fe6d6afa080da
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Thu Dec 27 11:28:51 2007 -0500
+
+ Add support for Korat PPC440EPx board
+
+ These patches add support for the PPC440EPx-based "Korat" board to
+ U-Boot. They are based primarily on support for the Sequoia board.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:16:25 2007 -0500
+
+ Add configuration file for Korat board
+
+ This patch supplies the configuration file for the Korat PPC440EPx-
+ processor board.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:16:11 2007 -0500
+
+ Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit aba19604d848b2838cfb9ebe818909e6a216058e
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Thu Dec 27 10:54:48 2007 -0500
+
+ Add 440EPx DDR2 SPD DIMM support
+
+ This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
+ controller. It should also work on the 440GRx. It is based on the DDR2
+ SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
+
+ This code has been tested on prototype Korat boards with three Kingston
+ DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
+ (two ranks). The Korat board has a single DIMM socket, but support has
+ been provided (though not tested) for boards with two DIMM sockets.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:15:30 2007 -0500
+
+ Copy 440EPx/GRx SDRAM data-eye search to common directory
+
+ This patch creates a non-board-specific file for performing the SDRAM
+ data-eye search. It also adds ECC error checking to the test of valid
+ data on readback when ECC is enabled.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit c46f53333b22b1f9098676bea8884fc7db820cf3
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:15:13 2007 -0500
+
+ Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
+
+ This patch adds the Denali SDRAM controller definitions to "ppc440.h".
+ It also fixes two typos in the definitions, so the board-specific
+ "sdram.h" files containing these definitions are also fixed to avoid
+ compiler warnings.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit c348578bf612d0c56d8d376d23cae16defbd86af
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Thu Dec 27 10:50:55 2007 -0500
+
+ Add Ethernet 1000BASE-X support for PPC4xx
+
+ This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
+ is defined, the PHY will advertise it's capabilities for autonegotiation
+ based on the capabilities shown in the PHY's status registers, including
+ 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
+ advertise hard-coded capabilities, as before.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Thu Dec 27 09:52:17 2007 -0500
+
+ Add driver for National Semiconductor LM73 temperature sensor
+
+ This driver is based on the driver for the LM75.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 12618278688ea9b3d76536960a5ad2e3790fac40
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:14:00 2007 -0500
+
+ Add driver for STMicroelectronics M41T60 RTC
+
+ This driver is based on the driver for the M41T11. In the intended
+ application, the RTC will be powered by a large capacitor, rather than a
+ battery. The driver therefore checks to see whether the RTC has lost
+ power. The chip's OUT bit is normally reset from its power-up state. If
+ the OUT bit is read as set, or if the date and time are not valid, then the
+ RTC is assumed to have lost power, and its date and time are reset to
+ 1900-01-01 00:00:00.
+
+ Support for adjusting the speed of the clock to improve accuracy is
+ provided through an environment variable.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit d3471173e14b7544bb60339eda8d3d3906694b0a
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:34:39 2007 -0500
+
+ Use out_be32() and friends to access memory-mapped registers in sequoia.c
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit c68f59fe3ec16769f82b5fca7421983c336d3aac
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:34:20 2007 -0500
+
+ Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:23:50 2007 -0500
+
+ Cosmetic changes to ECC POST for AMCC Denali core
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 2e583d6c81034f80a267b89fa55498ae063ccef1
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Dec 26 20:20:19 2007 +0100
+
+ ppc4xx: Fix compilation problem in 405 cache POST test
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Dec 22 12:20:09 2007 +0100
+
+ ppc4xx: Move virtual address of POST cache test to bigger address
+
+ On Sequoia & LWMON5 the virtual address of the POST cache test is now
+ moved to a bigger address. This enables usage of more memory on those
+ boards.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d91722102cf63f77a0148ed3f3d54a26d87575e9
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Dec 22 12:18:26 2007 +0100
+
+ ppc4xx: Fix problem in 44x cache POST routine
+
+ As repoted by Larry Johnson, running "diag run cache" caused a crash
+ in U-Boot. This problem was introduced by a patch that removed the
+ TLB entry for the cache test after the test has completed. Since this
+ TLB was only setup once, a 2nd attempt to run this cache test
+ failed with a crash. Now this TLB entry is created every time the
+ routine is called.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b0265b576bb8fa9465f99e99c323768b562fadc2
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 21 07:51:29 2007 +0100
+
+ ppc4xx: Update Makalu fdt support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Dec 19 09:05:40 2007 +0100
+
+ ppc4xx: Add fdt support to AMCC Katmai eval board
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 328a340392a5df9aaf00792be989df73e750859e
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 18 08:44:51 2007 +0100
+
+ ppc4xx: fdt: Cleanup setup of cpu node setup
+
+ Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
+ without using the absolute path to the cpu node. This makes it possible
+ to use this U-Boot version with both versions of cpu-node naming
+ "cpu@0" and the former "PowerPC,440EPx@0".
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Dec 17 17:26:21 2007 +0100
+
+ ppc4xx: Fix lwmon5 compilation problem
+
+ Now that the 440EPx ECC test is not board specific anymore
+ remove this Makefile.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
+Author: Anatolij Gustschin <agustschin@t-online.de>
+Date: Wed Dec 5 17:43:20 2007 +0100
+
+ Fix ppc4xx clear_bss() code
+
+ ppc4xx clear_bss() fails if BSS segment size is not
+ divisible by 4 without remainder. This patch provides
+ fix for this problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Nov 30 18:35:11 2007 +0100
+
+ PPC4xx: Minimal changes to add vxWorks support
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 052440b022ca8981d39b6f8c10d1aa6326f47480
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Fri Nov 23 13:09:18 2007 +0100
+
+ ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
+
+ When using dhcp/bootp the "netmask" environment variable is not
+ set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
+ desireable, so the following patch adds this this option to the board
+ config.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Oct 27 12:48:15 2007 -0400
+
+ Fix/enhance ECC POST for 440EPx/GRx
+
+ This patch allows the ECC POST to be used for different boards with the
+ PPC440 Denali SDRAM controller. Modifications include skipping the test
+ if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
+ to prevent timing errors.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Oct 27 12:48:05 2007 -0400
+
+ PPC4xx: Move/rename ECC POST for 440EPx/GRx
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit c29d2d3680046d430022c55e50fcb27f5866517e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 14 11:20:33 2007 +0100
+
+ ppc4xx: use correct io accessors for 4xx ethernet POST
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit ba79fde58a48c0a6ff8e2a96caba951594142203
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 14 11:19:56 2007 +0100
+
+ ppc4xx: fix flush + invalidate_dcache_range arguments
+
+ flush + invalidate_dcache_range() expect the start and stop+1 address.
+ So the stop address is the first address behind (!) the range.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 14 08:41:29 2007 +0100
+
+ ppc4xx: fdt: use fdt_fixup_ethernet()
+
+ By using aliases in the dts file, the ethernet node fixup is
+ much easier with the recently added functions.
+
+ Please note that the dts file needs the aliases for this to work.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 136288847e3b04f2ff357a067ad45e10afa0a24c
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Dec 13 14:52:53 2007 +0100
+
+ ppc4xx: Bring 4xx fdt support up-to-date
+
+ This patch update the 4xx fdt support. It enabled fdt booting
+ on the AMCC Kilauea and Sequoia for now. More can follow later
+ quite easily.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Dec 27 07:50:54 2007 +0100
+
+ cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
+
+ The check for an sufficiently erased destination was missing in the
+ buffered write function of the cfi flash driver (when
+ CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
+ writing to such a region will fail with the currect error message.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Nov 12 10:56:17 2007 +0100
+
+ Some configuration updates for the TQM5200 based TB5200 board:
+
+ - enable command line history
+ - increase malloc space (because of bigger flash sectors)
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit e318d9e9021a0af7508171f84ed09d0e79f0284e
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Thu Sep 27 11:10:08 2007 +0200
+
+ TQM8xx: use the CFI flash driver on all TQM8xx boards
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 11d9eec479b470eab9242ab937fca70a876d9376
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Sep 26 17:55:56 2007 +0200
+
+ TQM885D: adjust for doubled flash sector size + some minor fixes
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
+Author: Jens Gehrlein <jens.gehrlein@tqs.de>
+Date: Wed Sep 26 17:55:54 2007 +0200
+
+ TQM885D: Exchanged SDRAM timing by a more relaxed timing.
+
+ CAS-Latency=2, Write Recovery Time tWR=2
+ The max. supported bus frequency is 66 MHz. Therefore, changed
+ threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit b988b8cd443989be65161888eea0127ad03f846f
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Sep 26 17:55:56 2007 +0200
+
+ TQM885D: use calculated cpuclk instead of measuring it
+
+ On the TQM885D the measurement of cpuclk with the PIT reference
+ timer ist not necessary. Since all module variants use the same
+ external 10 MHz oscillator, the cpuclk only depends on the PLL
+ configuration - which is readable by software.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 492c7049869348d31168de8dad89651315e468e0
+Author: Jens Gehrlein <jens.gehrlein@tqs.de>
+Date: Thu Sep 27 14:54:46 2007 +0200
+
+ TQM885D: fix SDRAM refresh
+
+ At 133 MHz the current SDRAM refresh rate is too fast
+ (measured 4 * 1.17 us).
+ CFG_MAMR_PTA changes from 39 to 128. This result
+ in a refresh rate of 4 * 7.8 us at the default clock
+ 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
+ This is a compromise until a new method is found to
+ adjust the refresh rate.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit dabad4b9bc46908e301f73ce76b38b23626a96e9
+Author: Jens Gehrlein <jens.gehrlein@tqs.de>
+Date: Thu Sep 27 14:54:46 2007 +0200
+
+ TQM860M: Support for 10col SDRAMs, max. 128 MiB
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 61fb15c516fef5631e305f1976d7b3a679725856
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Dec 27 01:52:50 2007 +0100
+
+ Fix coding style issues; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 467bcee11fe26ad422f2de971aa70866079870f2
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 15:36:18 2007 +0100
+
+ cfi_flash: Add manufacturer-specific fixups
+
+ Run fixups based on the JEDEC manufacturer ID independent of the
+ command set ID.
+
+ This changes current behaviour: Previously, geometry reversal for AMD
+ chips were done based on the command set ID, while they are now done
+ based on the JEDEC manufacturer and device ID.
+
+ Also add fixup for top-boot Atmel chips. A fixup is needed for
+ AT49BV6416(T) too, but since u-boot currently only reads the low byte
+ of the device ID, there's no way to tell it apart from AT49BV642D,
+ which should not have this fixup. Since AT49BV642D support is
+ necessary to get ATNGW100 board support into mainline, I've commented
+ out the fixup for now.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 15:36:17 2007 +0100
+
+ cfi_flash: Add cmdset-specific init functions
+
+ Move things like reading JEDEC IDs and fixing up geometry reversal
+ into separate functions. The geometry reversal fixup is now performed
+ by altering the qry structure directly, which makes the sector init
+ code slightly cleaner.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit e23741f4a6d8047520ef0d4971762749b3587d32
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 15:36:16 2007 +0100
+
+ cfi_flash: Read whole QRY structure in one go
+
+ Read out the whole CFI Standard Query structure after successful cfi
+ identification. This allows subsequent code to access this information
+ directly without having to go through flash_read_uchar() and friends.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Dec 17 11:02:44 2007 +0100
+
+ AVR32: Fix logic inversion in disable_interrupts()
+
+ disable_interrupts() should return nonzero if interrupts were
+ _enabled_ before, not disabled.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit acac475212cbedb17b321a363a1c878e2b47b37f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 16:51:22 2007 +0100
+
+ AVR32: Enable interrupts at bootup
+
+ The timer code depends on the timer interrupt to keep track of the
+ upper 32 bits of the cycle counter. This obviously doesn't work when
+ interrupts are disabled the whole time.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9570bcd87f4db255514f43b6701746c412f8fef0
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Nov 15 10:03:45 2007 +0100
+
+ AVR32: Fix wrong pin setup for USART3
+
+ As reported by Gerhard Berghofer:
+
+ in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
+ instead of PB18 and PB19.
+
+ which is obviously correct. There's currently no code that uses
+ USART3, but custom boards may run into problems.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Nov 1 12:44:20 2007 +0100
+
+ README: Remove ATSTK1000 daughterboard list
+
+ As noted by Kim Phillips, these lists tend to become out of date.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit c81cbbad21cb0ae983e2e796211202234cdc8be2
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Tue Oct 30 14:56:36 2007 +0100
+
+ Add ATSTK100[234] to MAINTAINERS
+
+ Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
+ "mother". Also update the entry for ATSTK1000 to be not only about the
+ AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 64ff2357b1727213803591813dbc779c924bf772
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:02:54 2007 +0100
+
+ AVR32: Add support for the ATSTK1004 board
+
+ ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
+ which is a derivative of AT32AP7000.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 667568db157f374b85abd7e03596ddd1f0b25681
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:02:54 2007 +0100
+
+ AVR32: Add support for the ATSTK1003 board
+
+ ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
+ which is a derivative of AT32AP7000.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 5fee84a794a51ec830548cda485a770efb018b92
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:23:33 2007 +0100
+
+ AVR32: Make some AT32AP700x peripherals optional
+
+ Add a chip-features file providing definitions of the form
+
+ AT32AP700x_CHIP_HAS_<peripheral>
+
+ to indicate the availability of the given peripheral on the currently
+ selected chip.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 36f28f8a9605ee5dcfa330482cfc62171261af97
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:09:56 2007 +0100
+
+ AVR32: Rename at32ap7000 -> at32ap700x
+
+ The SoC-specific code for all the AT32AP700x CPUs is practically
+ identical; the only difference is that some chips have less features
+ than others. By doing this rename, we can add support for the AP7000
+ derivatives simply by making some features conditional.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Jun 29 18:22:34 2007 +0200
+
+ atmel_mci: Show SR when block read fails
+
+ Show controller status as well as card status when an error occurs
+ during block read.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Dec 13 14:52:53 2007 +0100
+
+ ppc4xx: Bring 4xx fdt support up-to-date
+
+ This patch update the 4xx fdt support. It enabled fdt booting
+ on the AMCC Kilauea and Sequoia for now. More can follow later
+ quite easily.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 12d30aa79779c2aa7a998bbae4c075f822a53004
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:34 2007 +0100
+
+ cfi_flash: Use map_physmem() and unmap_physmem()
+
+ Use map_physmem() and unmap_physmem() to convert from physical to
+ virtual addresses. This gives the arch a chance to provide an uncached
+ mapping for flash accesses.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 4d7d6936eb29af7cca330937808312aa5f61454d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:33 2007 +0100
+
+ Introduce map_physmem() and unmap_physmem()
+
+ map_physmem() returns a virtual address which can be used to access a
+ given physical address without involving the cache. unmap_physmem()
+ should be called when the virtual address returned by map_physmem() is
+ no longer needed.
+
+ This patch adds a stub implementation which simply returns the
+ physical address cast to a uchar * for all architectures except AVR32,
+ which converts the physical address to an uncached virtual mapping.
+ unmap_physmem() is a no-op on all architectures, but if any
+ architecture needs to do such mappings through the TLB, this is the
+ hook where those TLB entries can be invalidated.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:32 2007 +0100
+
+ cfi_flash: Introduce read and write accessors
+
+ Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
+ them to access the flash memory. This makes it clearer when the flash
+ is actually being accessed; merely dereferencing a volatile pointer
+ looks just like any other kind of access.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 812711ce6b3a386125dcf0d6a59588e461abbb87
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:31 2007 +0100
+
+ Implement __raw_{read,write}[bwl] on all architectures
+
+ This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
+ m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
+ from Linux.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Oct 6 18:55:36 2007 +0200
+
+ cfi_flash: Reorder functions and eliminate extra prototypes
+
+ Reorder the functions in cfi_flash.c so that each function only uses
+ functions that have been defined before it. This allows the static
+ prototype declarations near the top to be eliminated and might allow
+ gcc to do a better job inlining functions.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:29 2007 +0100
+
+ cfi_flash: Make some needlessly global functions static
+
+ Make functions not declared in any header file static.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 7e5b9b471518c5652febc68ba62b432193d6abf4
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:28 2007 +0100
+
+ cfi_flash: Break long lines
+
+ This patch tries to keep all lines in the cfi_flash driver below 80
+ columns. There are a few lines left which don't fit this requirement
+ because I couldn't find any trivial way to break them (i.e. it would
+ take some restructuring, which I intend to do in a later patch.)
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Dec 11 13:59:57 2007 +0100
+
+ CFI: synchronize command offsets with Linux CFI driver
+
+ Fixes non-working CFI Flash on the Inka4x0 board.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Dec 7 12:17:34 2007 -0600
+
+ Handle MPC85xx PCIe reset errata (PCI-Ex 38)
+
+ On the MPC85xx boards that have PCIe enable the PCIe errata fix.
+ (MPC8544DS, MPC8548CDS, MPC8568MDS).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Dec 7 12:04:30 2007 -0600
+
+ Update Freescale MPC85xx ADS/CDS/MDS board config
+
+ * Enabled CONFIG_CMD_ELF
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d435793229ce29a42797c1edc39f5b34f987f91a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Dec 7 04:59:26 2007 -0600
+
+ Handle Asynchronous DDR clock on 85xx
+
+ The MPC8572 introduces the concept of an asynchronous DDR clock with
+ regards to the platform clock.
+
+ Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
+ mode.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:34:28 2007 -0600
+
+ Update Freescale MPC85xx ADS/CDS/MDS board config
+
+ * Removed some misc environment setup
+ * Enabled CONFIG_CMDLINE_EDITING
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:47:44 2007 -0600
+
+ Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:16:18 2007 -0600
+
+ Move the MPC8540 ADS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 870ceac5b3a3486c109396e005af81ae762b5710
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:14:50 2007 -0600
+
+ Move the MPC8560 ADS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:13:47 2007 -0600
+
+ Move the MPC8568 MDS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a853d56c59b33415304531443633808736acfc6e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 02:18:59 2007 -0600
+
+ Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
+
+ We already had defines for LAWAR_TRGT_IF_* that we should use
+ rather than creating new ones. Also, added some missing defines for
+ PCIE targets.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 04db400892da37b76a585e332a0c137954ad2015
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 02:10:09 2007 -0600
+
+ Stop using immap_t on 85xx
+
+ In the future the offsets to various blocks may not be in same location.
+ Move to using CFG_MPC85xx_*_ADDR as the base of the registers
+ instead of getting it via &immap.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2714223f8e04ab3e4133ff65872eef366d90bfea
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 01:23:09 2007 -0600
+
+ Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c480861bf000156e6a3e932c258db59ff2212dd3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 01:06:19 2007 -0600
+
+ Update MPC8568 MDS to use libfdt
+
+ Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Nov 14 15:52:06 2007 -0500
+
+ Add PCI Express support on MPC8568MDS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b90d25497625b90ffa3f2911a0895ca237556ff5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 00:11:44 2007 -0600
+
+ Update MPC85xx CDS to use libfdt
+
+ Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 28 22:54:27 2007 -0600
+
+ Update MPC8540 ADS to use libfdt
+
+ Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5ce715802f6c50dc78b3405b92f184b1e3710519
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 28 22:40:31 2007 -0600
+
+ Update MPC8560 ADS to use libfdt
+
+ Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 28 00:36:33 2007 -0600
+
+ Stop using immap_t for cpm offset on 85xx
+
+ In the future the offsets to various blocks may not be in same location.
+ Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
+ instead of getting it via &immap->im_cpm.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Nov 27 23:25:02 2007 -0600
+
+ Stop using immap_t for guts offset on 85xx
+
+ In the future the offsets to various blocks may not be in same location.
+ Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
+ instead of getting it via &immap->im_gur.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 50c03c8cf494d91cdec39670d95337c743e16ec9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Nov 27 22:42:34 2007 -0600
+
+ Update MPC8544 DS config
+
+ * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
+ * Removed some misc environment setup
+ * Moved to using fdtfile & fdtaddr as fdt env var names
+ * Enabled CONFIG_CMDLINE_EDITING
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit addce57e2e4c49e77ffb2020a84690713bb18b47
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 17:12:24 2007 -0600
+
+ Update MPC8544DS to use libfdt
+
+ Updated the MPC8544DS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 00:15:30 2007 -0600
+
+ Add libfdt based ft_cpu_setup for mpc85xx
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 11 13:38:19 2007 +0100
+
+ ppc4xx: Correct GPIO offset in gpio_config()
+
+ Thanks to Gary Jennejohn for pointing this out.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8809a2713b1ceaf3da55d9d785470294f15de06a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 11 11:46:01 2007 +0100
+
+ rtc: Fix merging problem
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Dec 8 14:47:34 2007 +0100
+
+ ppc4xx: 405EX: Correctly enable USB pins
+
+ This patch selects the USB data pins in the 405EX GPIO and MFC (multi
+ function control) registers. This is done for the AMCC Kilauea and
+ Makalu eval boards.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Dec 8 08:25:09 2007 +0100
+
+ CFI: Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Fri Dec 7 23:35:02 2007 +0100
+
+ CFI: support JEDEC flash roms in CFI-flash framework
+
+ The following patch adds support for non-CFI flash ROMS, by hooking into the
+ CFI flash code and using most of its code, as recently discussed here in the
+ thread "Mixing CFI and non-CFI flashs".
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c01b17dd856fa120b2970f50d9598546a4927ec3
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Nov 28 21:24:50 2007 -0500
+
+ Conditionally compile fdt_fixup_ethernet()
+
+ Fix compiler warnings: On boards that don't have ethernets defined,
+ don't compile fdt_fixup_ethernet().
+
+commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Nov 27 21:59:46 2007 -0600
+
+ Convert boards that set memory node to use fdt_fixup_memory()
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 17:06:15 2007 -0600
+
+ Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
+
+ We use a combination of the serialN alias and CONFIG_CONS_INDEX to
+ determine which serial alias we should set linux,stdout-path to.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 14:57:45 2007 -0600
+
+ Add common memory fixup function
+
+ Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 11:19:12 2007 -0600
+
+ Conditionally compile fdt_support.c
+
+ Modify common/Makefile to conditionally compile fdt_support.c based
+ on CONFIG_OF_LIBFDT.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d88e7ba0980773479e1a64badb293116071b7ef0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 10:41:40 2007 -0600
+
+ Fix build breakage due to libfdt import
+
+ The IDS8247 got lost in the update and need an API update
+ do to rename of functions in libfdt.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Nov 23 19:43:20 2007 -0500
+
+ Add spaces around the = in the fdt print format.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Dec 7 01:25:38 2007 +0900
+
+ sh: Moved driver of the SuperH dependence
+
+ The composition of the directory in the drivers/ changed.
+ I moved SuperH serial driver and marubun PCMCIA driver.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Dec 6 10:21:19 2007 +0100
+
+ Release v1.3.1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Dec 6 10:21:03 2007 +0100
+
+ ADS5121 Board: fix compile problem.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a27044b14a9e93678a82d7b35f202b93e7687abc
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Dec 6 05:58:43 2007 +0100
+
+ ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
+
+ This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
+ setting the FIXD bit in the SDR0_MFR register. Here a description of the
+ symptoms:
+
+ Problem Description
+ ------------------------------
+ If a DMA is performed between memory and PCI with the DMA 1 Controller
+ using prefetch, and as a result uses a special purpose buffer selected by
+ the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
+ the first part of the transfer sequence is performed twice. The
+ PPC440SPe PCI Controller requests more data than was needed such that in
+ the case of enforce memory protection, a host CPU exception can occur.
+ No data is corrupted, because data transfer is stopped in the PCI
+ Controller. Prefetch enable is specified by setting DMA Configuration
+ Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
+
+ Behavior that may be observed in a running system
+ ---------------------------------------------------------------------------
+
+ 1. DMA performance is decreased because of the double access on the PCI bus
+ interface.
+ 2. If an illegal access to some address on the PCI bus is detected at the
+ system level, a machine check or similar system error may occur.
+
+ Workarounds Available
+ ----------------------------------
+
+ 1. Do not program prefetch. Note that a prefetch command cannot be programmed
+ without selecting a special purpose buffer.
+ 2. To avoid crossing a physical boundary of the PCI slave device, add 512
+ bytes of address to the PCI address range.
+
+ This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
+ from AMCC and slighly changed.
+
+ Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 4 16:29:48 2007 +0100
+
+ ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Dec 3 00:15:28 2007 +0100
+
+ Prepare for 1.3.1-rc1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e15e33433e7c05111968dc9b434a52fd42cbd221
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Nov 30 07:15:41 2007 +0100
+
+ ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
+
+ This manual PCIe reset triggering solves the problem seen with the
+ Intel EPRO/1000 card, which was not detected (link not established)
+ upon power-up reset.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 260eea5676ca46903a335686cc020b29c4ca46fe
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Nov 29 01:21:54 2007 +0900
+
+ sh: Add SuperH boards maintainer to MAINTAINERS file
+
+ Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Nov 29 00:13:04 2007 +0900
+
+ sh: Add ms7750se support in MAKEALL
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c7144373427a178332bf9754131c8c34c52c200a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 27 09:44:53 2007 +0100
+
+ sh: Add sh3 and sh4 support in MAKEALL
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 130080874a3d28450098481a262c5f7c855e908d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Nov 25 02:51:17 2007 +0900
+
+ sh: Add document for SuperH.
+
+ This document is a summary of information concerning SuperH of U-Boot.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Nov 25 02:39:31 2007 +0900
+
+ sh: Add marubun's pcmcia driver
+
+ Marubun pcmcia is a chip for PCMCIA used with SuperH.
+ Of course, this can be used even by other architectures.
+ When use this driver, came to be able to use CompactFlash
+ and Ethernet.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit febd86b969b975289ed948f1ac0eb9722da41ced
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Nov 25 02:32:13 2007 +0900
+
+ sh: Update SuperH SCIF driver
+
+ - Changed volatile unsigned to vu_.
+ - Changed Makefile for kconfig.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 8be760903645af09871be50ad0a6f9ebb62b311d
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 27 11:57:35 2007 +0100
+
+ ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
+
+ After an error in the AMCC 405EX users manual now correctly configure
+ IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
+ usage.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Nov 26 19:18:21 2007 +0100
+
+ Cleanup coding style; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 25 22:39:25 2007 +0100
+
+ MAKEALL: add missing 512x boards in ppc
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a340c325e668ca7386c2276387681720be9c3757
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 25 18:45:47 2007 +0100
+
+ Makefile : fix tags ctags etags with new drivers organization
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 26 15:06:14 2007 +0100
+
+ ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
+
+ As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
+ operation.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ca1ce226287270bb01e25b8e3674c701f12edf19
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 26 15:01:45 2007 +0100
+
+ ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 25 18:45:47 2007 +0100
+
+ Makefile : fix tags ctags etags with new drivers organization
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 59829cc189378c142c13d2aa8d9a897d8bef3961
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 21:26:56 2007 +0100
+
+ drivers/mtd : move mtd drivers to drivers/mtd
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 318c0b90431f2648552e5ade78833f42652ce859
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 21:17:55 2007 +0100
+
+ drivers/misc : move misc drivers to drivers/misc
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 33daf5b7858807cb4ce4158c2c56524671c14c08
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 21:13:59 2007 +0100
+
+ drivers/block : move block drivers to drivers/block
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0c698dcaa70275eb8814f665b545547cee013892
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 20:59:50 2007 +0100
+
+ drivers/rtc : move rtc drivers to drivers/rtc
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f868cc5a50757d94f36c312395481cb0f187d9e6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 20:14:44 2007 +0100
+
+ drivers/hwmon : move hardware monitor drviers to drivers/hwmon
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 19:46:45 2007 +0100
+
+ drivers/input : move input drivers to drivers/input
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e4558666293364fc3af1c1d9381ca933fa0f1275
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 19:40:11 2007 +0100
+
+ drivers/usb : move usb drivers to drivers/usb
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 19:33:38 2007 +0100
+
+ drivers/serial : move serial drivers to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Nov 21 21:19:24 2007 +0100
+
+ drivers/net : move net drivers to drivers/net
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 352d259130b349fe9593b8dada641bd78a9659e5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 20 20:41:48 2007 +0100
+
+ drivers/video : move video drivers to drivers/video
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 73646217186aa17afc8e305c5f06f06dd335eaad
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 20 20:33:09 2007 +0100
+
+ drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 20 20:28:09 2007 +0100
+
+ drivers/pci : move pci drivers to drivers/pci
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9162352817579840d7802da6d85872b3ca003c97
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Thu Nov 22 17:23:23 2007 -0500
+
+ Fix fdt printing for updated libfdt
+
+ Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 21 13:30:15 2007 -0600
+
+ Add additional fdt fixup helper functions
+
+ Added the following fdt fixup helpers:
+ * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
+ * do_fixup_by_compat{_u32} - Find matching nodes by compat
+
+ The _u32 variants work the same only the property they are setting
+ is know to be a 32-bit integer instead of a byte buffer.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 21 11:11:03 2007 -0600
+
+ Add fdt_fixup_ethernet helper to set mac addresses
+
+ Added a fixup helper that uses aliases to set mac addresses
+ in the device tree based on the bd_t
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit dbaf07ce620aab249e3502b20a986234a6af1d3a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 21 14:07:46 2007 -0600
+
+ Fix warnings from import of libfdt
+
+ cmd_fdt.c: In function fdt_print:
+ cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
+ cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
+ cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
+ cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8d04f02f6224e6983f4812ea4da704950ec8539c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 24 11:04:22 2007 -0500
+
+ Update libfdt from device tree compiler (dtc)
+
+ Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
+ the device tree compiler (dtc) project.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e93becf80d732b64aef81b23e8b6ece02c40533d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sat Nov 3 19:46:28 2007 -0500
+
+ Move do_fixup* for libfdt into common code
+
+ Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
+ into common/fdt_support.c and renamed:
+
+ do_fixup() -> do_fixup_by_path()
+ do_fixup_u32() -> do_fixup_by_path_u32()
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f738b4a75998f42a7408defadc9baac7a31c92db
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 25 16:15:07 2007 -0500
+
+ Make no options to fdt print default to '/'
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 24 10:21:57 2007 -0500
+
+ Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
+
+ Removed:
+ fdt_node_is_compatible
+ fdt_find_node_by_type
+ fdt_find_compatible_node
+
+ To ease merge of newer libfdt as we aren't using them anywhere at this time.
+
+ Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
+ reason.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 98e2867cc85409b919f862e6c16026461ec955df
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Wed Nov 21 09:19:37 2007 -0700
+
+ [BUILD] Remove libraries when updating autoconf.mk
+
+ Fix library problems caused by conditional compilation. Using
+ autoconf.mk to decide which files to compile has caused a problem when
+ changing configuration from one board to another without clearing out
+ the library (*.a) files.
+
+ It used to be that the linker was always passed the same list of .o
+ files when building the .a files. However, that is not longer true
+ with conditional compilation. Now, a different board config will have
+ a different file list passed to the linker. The problem occurs when
+ a library has already been built and the board config is changed.
+
+ Since the linker will update instead of replace a preexisting library,
+ then if the file list changes to remove some object files the old
+ objects will still exist in the library.
+
+ The solution is to remove all old library files when autoconf.mk is
+ made.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 21 08:49:50 2007 -0600
+
+ [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
+
+ Modify libfdt/Makefile to conditionally compile the *.c files based
+ on the board config.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4a43719a7738712811d822ca8125427b27a55cdc
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:31 2007 -0600
+
+ [BUILD] conditionally compile common/cmd_*.c in common/Makefile
+
+ Modify common/Makefile to conditionally compile the cmd_*.c files based
+ on the board config.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:31 2007 -0600
+
+ [BUILD] Generate include/autoconf.mk from board config files
+
+ Use cpp and sed to postprocess config.h and import the defined values
into include/autoconf.mk. autoconf.mk is then included by config.mk to
give 'make' access to the board configuration.
- Doing this enables conditional compilation at the Makefile level instead
- of by wrapping every .c file with #ifdef/#endif wrappers.
+ Doing this enables conditional compilation at the Makefile level instead
+ of by wrapping every .c file with #ifdef/#endif wrappers.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 68b88999da87ab88e71e1306192905be3450198e
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Nov 20 15:02:26 2007 -0600
+
+ 8610HPCD: Enable the 8610 Display Interface Unit
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Nov 20 15:00:53 2007 -0600
+
+ Move 8610 DIU interface structure definitions to header file.
+
+ These two structures are still needed during the
+ initialization and setup of the DIU hardware.
+ So move them to the fsl_diu_fb.h file for now.
+ Official "blah".
+
+ Noticed-by: York Sun <yorksun@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 080c646dbf474a109c3f85718fb01ce042a38c45
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 20 20:14:18 2007 +0100
+
+ drivers/i2c : move i2c drivers to drivers/i2c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9a337ddc154a10a26f117fd147b009abcdeba75a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Nov 19 22:20:24 2007 +0100
+
+ Prepare for 1.3.0 release.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f30ad49b16bf998b03c1a5228b6c86369d61c258
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Mon Nov 19 10:02:13 2007 -0500
+
+ Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
+
+ CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit f8c320609366176b31104d9bf5e295232e1c7f1d
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Mon Nov 19 11:14:16 2007 +0900
+
+ [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
+
+ lowlevel_init.S: Assembler messages:
+ lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
+
+ Looking at codes, the `memtest' and `clearmem' are intentional mixed
+ use of `global symbols' and `label' for debugging purpose. To make it
+ build, just disable global-symbols-use for now. As a result `memtest'
+ still remains as unused, but leave it be...
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Nov 19 12:59:14 2007 +0100
+
+ Fix build problems with mp2usb board
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6bf4c686afca1e86e1c384d59218f914605713bf
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 18 18:36:11 2007 +0100
+
+ s3c24x0: Fix usb_ohci.c missing in Makefile
+ and usb_ohci.c warning differ in signedness
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6073f61e078da5ddb521b56256bcc36508589883
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 18 12:55:02 2007 +0100
+
+ pb1x00 board: Fix u16 status declaration when PCMCIA is defined
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Nov 18 17:11:09 2007 +0100
+
+ Fix compiler warnings for ARM systems.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Nov 18 16:36:27 2007 +0100
+
+ Fix compiler warnings for PPC systems. Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 653811a3c2b35856bf12e196dcc8c4694e28e420
+Author: Stefan Roese <sr@denx.de>
+Date: Sun Nov 18 14:44:44 2007 +0100
+
+ ppc4xx: Correct 405EX PCIe UTL register mapping
+
+ Map 4k mem space for UTL registers for each port.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 17 11:31:10 2007 +0100
+
+ Fix warning differ in signedness in net/net.c and net/nfs.c
+
+commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Nov 17 20:42:45 2007 +0900
+
+ gth2.c: Fix a warning on gth2 build.
+
+ gth2.c: In function 'misc_init_r':
+ gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 2309c130aa4c84b91bd874a41269c923eb61b555
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Nov 17 07:58:25 2007 +0100
+
+ Fix warning differ in signedness in common/cmd_scsi.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9ea61b57968554eaf0f474ec7e088b17d367f474
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Nov 17 14:52:29 2007 +0100
+
+ ppc4xx: Update AMCC Kilauea config file
+
+ - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Nov 17 20:05:26 2007 +0900
+
+ [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
+
+ Current trick to pick up GNU assembler minor version does not work with the
+ latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
+ "(GNU Binutils) ".
+
+ $ sde-as --version |grep "GNU assembler"
+ GNU assembler 2.15.94 mipssde-6.02.02-20050602
+ $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
+ 2.15.94
+ $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
+ 15
+ $
+
+ $ mips-linux-as --version |grep "GNU assembler"
+ GNU assembler (GNU Binutils) 2.18
+ $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
+ (GNU
+ $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
+ (no output)
+ $
+
+ As a result of above, you'll see many noises with such binutils:
+
+ make -C cpu/mips/
+ /bin/sh: line 0: [: : integer expression expected
+ /bin/sh: line 0: [: : integer expression expected
+ make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
+ mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
+ /bin/sh: line 0: [: : integer expression expected
+ mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
+ /bin/sh: line 0: [: : integer expression expected
+ mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
+ /bin/sh: line 0: [: : integer expression expected
+
+ This patch simplifies the trick and makes it work with both versions of gas.
+ I also replace an expensive `awk (or gawk)' with `cut'.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 16664f72850846e645616da1c0fa5afcd6d15f15
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Nov 17 20:05:26 2007 +0900
+
+ [MIPS] Remove useless instructions for initializing $gp.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 03c031d5660ea946c39af6e2e16267da857c609f
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Oct 27 15:27:06 2007 +0900
+
+ [MIPS] MIPS 4K core: Coding style cleanups
+
+ No logical changes.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Nov 17 20:05:20 2007 +0900
+
+ [MIPS] gth2.c: Fix a warning on gth2 build.
+
+ gth2.c: In function 'misc_init_r':
+ gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 4fbd0741b2b6441da10be93e10267122581b7079
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Oct 27 15:22:33 2007 +0900
+
+ [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
+
+ au1x00_eth.c: In function 'au1x00_miiphy_write':
+ au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit f01320459736f156707425cf8112f98606301aa4
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Oct 27 15:00:25 2007 +0900
+
+ [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
+
+ au1x00_eth.c: In function 'au1x00_enet_initialize':
+ au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
+ au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
+ au1x00_eth.c:246: error: for each function it appears in.)
+ au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
+ au1x00_eth.c: In function 'au1x00_miiphy_write':
+ au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
+ make[1]: *** [au1x00_eth.o] Error 1
+
+ Fixed by moving these two functions forward.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit b09258c5393edd1087c5f39ae68338f16b49f8b3
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Oct 27 15:00:25 2007 +0900
+
+ MAKEALL: Added missing pb1000 board
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Oct 27 15:00:24 2007 +0900
+
+ [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Oct 27 15:00:24 2007 +0900
+
+ [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 5947f6999aafa7c54c1390983d264a8463dfea8e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Nov 17 02:34:38 2007 +0100
+
+ Update CHANGELOIG, prepare for -rc4
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
+Author: Luotao Fu <l.fu@pengutronix.de>
+Date: Wed Nov 14 18:58:33 2007 +0100
+
+ Fix the i2c frequency and default address in rsdproto board
+
+ rsdproto board support has wrong I2C frequency and wrong return value
+ handling.
+
+ Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
+
+commit 429c180edad038f91c989cb14b478228092e7054
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Nov 17 01:45:38 2007 +0100
+
+ powerpc: Backout relocation changes for MPC5121, too.
+
+ Apply Grant Likely's backout to MPC5121 code, too.
+
+ Pointed out by Rafal Jaworowski <raj@semihalf.com>
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Nov 13 22:18:33 2007 -0700
+
+ powerpc: Backout relocation changes.
+
+ Ugh. I *hate* to back this change out, but these compiler flags don't
+ work for relocation on all versions of GCC. I've not been able to
+ reproduce the environment in my setup (and hence, not been able to
+ find a combination that *does* work), so I've got no choice but to go
+ back to the old gcc flags and linker script.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 13 09:11:05 2007 +0100
+
+ Fixed mips_io_port_base build errors.
+
+ This patch has been sent on:
+ - 29 Sep 2007
+
+ Although mips_io_port_base is currently a part of IDE command, it is quite
+ fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
+ it to MIPS general part, and introduce `set_io_port_base()' from Linux.
+
+ This patch is triggered by multiple definition of `mips_io_port_base' build
+ error on gth2 (and tb0229 also needs this fix.)
+
+ board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
+ /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
+ common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
+ make: *** [u-boot] Error 1
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Nov 17 01:30:40 2007 +0100
+
+ Fix a bug in the slave serial programming mode for the Xilinx
+ Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
+ the most significant bit was set, which did not work on any
+ architecture where "char" defaulted to be an unsigned type.
+
+ Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Nov 1 12:23:29 2007 -0500
+
+ 86xx: Fix broken variable reference when #def DEBUGing.
+
+ Sometimes you can't reference the DDR2 controller variables.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Oct 26 18:32:00 2007 +0800
+
+ make 8610 board use pixis reset
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Mon Oct 29 19:26:21 2007 +0800
+
+ Unify pixis_reset altbank across board families
+
+ Basically, refactor the CFG_PIXIS_VBOOT_MASK values
+ into the separate board config files.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 64bf555465c7926be13e1046ac0d0f05ac72829c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Nov 7 08:19:21 2007 +0100
+
+ Fix warning: pointer targets in assignment differ in signedness
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7a60ee7c6248a958c5757d3660a1702723a2786d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Nov 7 08:19:19 2007 +0100
+
+ Fix warning differ in signedness in common/cmd_ide.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Nov 16 14:16:54 2007 +0100
+
+ ppc4xx: Enable 405EX PCIe UTL register configuration
+
+ Till now the UTL registers on 405EX were not initialized but left with
+ their default values. This patch new initializes some of the UTL
+ registers on 405EX.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Nov 16 14:00:59 2007 +0100
+
+ ppc4xx: Update AMCC Makalu for board rev 1.1
+
+ This patch adds changes needed for Makalu rev 1.1:
+
+ - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
+ - Enable 2nd ethernet port EMAC1
+ - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
+ - Reset PCIe ports via GPIO upon bootup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4d4faae65e115e327425cd514c1a35146a85166b
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:31 2007 -0600
+
+ Group PCI and PCMCIA drivers in drivers/Makefile
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5798f87dc10a496d79d3177b9f5a76488987fd35
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:31 2007 -0600
+
+ Group block/flash drivers in drivers/Makefile
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit df58c81551700f058b44cacf55a7997fa63bfe0a
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:31 2007 -0600
+
+ Group USB drivers in drivers/Makefile
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:30 2007 -0600
+
+ Group i2c drivers in drivers/Makefile
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit ec00c76de0e5971273905998d62d6bb119324218
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:30 2007 -0600
+
+ Group console drivers in drivers/Makefile
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 754f230aa01b8c789fc31f8013c2487954073300
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:30 2007 -0600
+
+ Group network drivers in drivers/Makefile
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f0037c56b0d12cd46215124667b9f83d60ef9391
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:30 2007 -0600
+
+ Build: split COBJS value into multiple lines
+
+ This change is in preparation for condtitionial compile support in the
+ build system. By spliting them all into seperate lines now, subsequent
+ patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
+ be less invasive and easier to review
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Mon Sep 24 09:05:30 2007 -0600
+
+ Add .gitignore files
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 955413f35f054a82e40042f1dbcf501c6a05719b
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Nov 15 08:27:52 2007 -0700
+
+ Revert "Correct relocation fixup for mpc5xx"
+
+ This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit e15633888a058aacb31a62d2cf1278e1e4c236ab
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Nov 15 08:24:32 2007 -0700
+
+ Revert "Correct fixup relocation for MPC5xxx"
+
+ This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Nov 15 08:21:04 2007 -0700
+
+ Revert "Correct fixup relocation for mpc8220"
+
+ This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 70922342369e5e39b286fe21e768a239ca07a514
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Nov 15 08:20:57 2007 -0700
+
+ Revert "Correct fixup relocation for mpc824x"
+
+ This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Nov 15 08:20:50 2007 -0700
+
+ Revert "Correct fixup relocation for mpc8260"
+
+ This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Nov 15 08:20:43 2007 -0700
+
+ Revert "Correct fixup relocation for mpc83xx"
+
+ This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Nov 15 08:20:25 2007 -0700
+
+ Revert "[MPC512x] Correct fixup relocation"
+
+ This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 15 14:25:09 2007 +0100
+
+ ppc4xx: Small AMCC Kilauea cleanup
+
+ Remove not needed pci_target_init() function.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit aee747f19b460a0e9da20ff21e90fdaac1cec359
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 15 14:23:55 2007 +0100
+
+ ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
+
+ - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
+ - Cleanup of the 4xx GPIO functions
+ - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 15 14:20:08 2007 +0100
+
+ ppc4xx: AMCC Taihu board config file cleanup
+
+ This patch makes the AMCC Taihu a little more compatible to the other
+ AMCC eval boards.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Nov 15 13:37:28 2007 +0100
+
+ [INKA4x0] NG hardware: flash support
+
+ Disabled and remove inka4x0 custom flash driver, use CFI flash
+ driver instead.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 5fb6d7191e206cdde0e23140fd8111caed93a595
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Nov 15 13:29:55 2007 +0100
+
+ [INKA4x0] NG hardware: SDRAM support
+
+ Add support for three new DDR chips that may be present on a NG
+ INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
+
+ Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit f23cb34c367bb27585a4fdb8a75277370e7d0596
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Thu Nov 15 13:24:43 2007 +0100
+
+ [INKA4x0] NG hardware: platform code update
+
+ - Cleanup compile warnings.
+ - Add missing '\0' in default environment.
+ - Increase CFG_MONITOR_LEN to 256 KiB.
+ - Add required CFG_USE_PPCENV.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Thu Nov 15 08:58:00 2007 +0000
+
+ Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
+ Remove warnings re onenand_read() & write()
+
+commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Thu Nov 15 08:45:13 2007 +0000
+
+ Correction patch
+
+commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Thu Sep 13 18:52:28 2007 +0800
+
+ Enable ULi1575 Ethernet support in 8610HPCD config
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 13 08:18:20 2007 +0100
+
+ ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 13 08:06:11 2007 +0100
+
+ ppc4xx: Fix 405EX PCIe UTLSET register setup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1ce55151c85d068f70317a8d65c61058b891afb4
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Nov 13 07:50:29 2007 +0100
+
+ [UC101] SRAM now with 2 MB working.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 2d14684341109a69616e4d6016cd61402d55086f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Nov 9 15:37:53 2007 +0100
+
+ ppc4xx: Use generic usb-ohci driver for sequoia board
+
+ This patch makes the sequoia board use the generic usb-ohci driver
+ instead of cpu/ppc4xx/usb_ohci.c.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Nov 9 15:37:23 2007 +0100
+
+ ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
+
+ This patch disables the 44x d-cache on 'usb start' and
+ reenables it on 'usb stop'. This should be seen as a
+ temporary fix until the generic usb-ohci driver can
+ life with d-cache enabled.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Nov 9 15:36:44 2007 +0100
+
+ ppc4xx: Remove redundant code from 4xx network driver
+
+ This patch removes some redundant code and decrements the end
+ address of cache flush and invalidate by 1.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5ca9881aad8c413ac2a82868a5e3719178254502
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri Nov 9 15:24:26 2007 +0000
+
+ Add apollon board support
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit b53313dbfc74525d85f1e7e0102f902d5c863beb
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Nov 9 12:19:58 2007 +0100
+
+ ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c7f69c340277935a6c19a956421852da944a365f
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Nov 9 12:18:54 2007 +0100
+
+ ppc4xx: Make output a little shorter on I2C bootrom detection
+
+ Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
+ already print a line with the information which I2C bootrom is
+ used for bootstrap configuration. So we don't need this extra line
+ with "I2C boot EEPROM en-/dis-abled".
+
+ This patch also has a little code cleanup integrated.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8d737a28152ec12873f8544cca1fb39a49e5e693
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Nov 8 12:50:18 2007 -0600
+
+ ColdFire: MCF5329 - Remove reset registers from CCM
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Nov 8 12:31:11 2007 -0600
+
+ ColdFire: MCF5329 - Add Reset structure to immap_5329.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Nov 8 12:19:01 2007 -0600
+
+ ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 225a24b5e062ad94627424508ae814f51dbe1a34
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Nov 7 18:00:54 2007 -0600
+
+ ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 248c7c14835f34d5d910b45e5600050e58ca6cab
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Nov 7 17:56:15 2007 -0600
+
+ ColdFire: MCF532x - Update do_reset() using core reset
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Nov 7 17:51:00 2007 -0600
+
+ ColdFire: Update cpu flag for 4.2-xx compiler
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 070ba56115b4da63b46e974287fa4550d4023386
+Author: York Sun <yorksun@freescale.com>
+Date: Wed Oct 31 14:59:04 2007 -0500
+
+ 8610: Add console frame buffer support to FSL 8610 DIU driver.
+
+ Add cfb console support to FSL 8610 DIU driver.
+ Inspect board version from PIXIS to obtain correct pixel format.
+
+ Use #define CONFIG_VIDEO in config file to enable fb console.
+
+ To switch monitor, set monitor variable to
+ 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
+ followed by "diufb init".
+
+ Preserve logo bitmap at the top of the fb console.
+
+ Signed-off-by: York Sun <yorksun@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a877880c6949e948bd63cd6ea4e216573d2f53dd
+Author: York Sun <yorksun@freescale.com>
+Date: Mon Oct 29 13:58:39 2007 -0500
+
+ 8610: Add 8610 DIU display driver
+
+ 1280x1024 and 1024x768 @ 32 bpp are supported now.
+ DVI, Single-link LVDS, Double-link LVDS are all supported.
+
+ Environmental variable "monitor" is used to specify monitor port.
+
+ A new command "diufb" is introduced to reinitialize monitor
+ and display a BMP file in the memory. So far, 1-bit, 4-bit,
+ 8-bit and 24-bit BMP formats are supported.
+
+ diufb init
+ - initialize the diu driver
+ Enable the port specified in the environmental variable "monitor"
+
+ diufb addr
+ - display bmp file in memory.
+ The bmp image should be no bigger than the resolution, 1280x1024
+ for DVI and double-link LVDS, 1024x768 for single-link LVDS.
+
+ Note, this driver allocate memory but doesn't free it after use
+ It is written on purpose -- to avoid a failure of reallocation
+ due to memory fragement.
+
+ ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
+
+ Signed-off-by: York Sun <yorksun@freescale.com>
+ Signed-off-by: Jon loeliger <jdl@freescale.com>
+
+commit 52e5ddfecdda308f75782fae206b677b1810f5f9
+Author: York Sun <yorksun@freescale.com>
+Date: Wed Oct 31 10:43:59 2007 -0500
+
+ FSL: Add a freescale bitmap logo.
+
+ This Freescale logo is a 340 x 128 x 4bpp BMP file
+ that can be displayed by the DIU Framebuffer driver.
+
+ Signed-off-by: York Sun <yorksun@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
+Author: York Sun <yorksun@freescale.com>
+Date: Mon Oct 29 13:57:53 2007 -0500
+
+ 8610: Make some extra debug environment variables conditional.
+
+ One may #define ENV_DEBUG to get them back again.
+
+ Signed-off-by: York Sun <yorksun@freescale.com>
+
+commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Mon Oct 29 19:26:21 2007 +0800
+
+ 8610: Actually enable pixis_reset CONFIGs
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit f3bceaab230b4748d0afc4109b6837308f018b40
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Oct 26 18:31:59 2007 +0800
+
+ Fix the BAT definition of PCI IO on 8610 board
+
+ The address in the BAT register is aligned with the BAT size.
+ The original definition actually did not define BAT for PCIE2 IO.
+ This patch fix this.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Mon Oct 29 19:26:21 2007 +0800
+
+ Unify pixis_reset altbank across board families
+
+ Basically, refactor the CFG_PIXIS_VBOOT_MASK values
+ into the separate board config files.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Oct 26 18:32:00 2007 +0800
+
+ make 8610 board use pixis reset
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Nov 1 12:23:29 2007 -0500
+
+ 86xx: Fix broken variable reference when #def DEBUGing.
+
+ Sometimes you can't reference the DDR2 controller variables.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Mon Nov 5 17:39:24 2007 +0800
+
+ Implement general ULi 526x Ethernet driver support in U-boot
+
+ This patch implements general ULi 526x Ethernet driver.
+ Until now, it is the only native Ethernet port on
+ MPC8610HPCD board, but it could be used on other boards
+ with ULi 526x Ethernet port as well.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Thu Nov 1 08:46:50 2007 -0500
+
+ NET: Add Ethernet 1000BASE-X support for PPC4xx
+
+ This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
+ "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
+ returns non-zero iff the PHY registers are configured for 1000BASE-X. The
+ "mii info" command is modified to distinguish between 1000BASE-T and -X.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit 298035df4948b113d29ac0e694717d34b95bc5dc
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Wed Oct 31 11:21:29 2007 -0500
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ NET: Cosmetic changes
-commit 080c646dbf474a109c3f85718fb01ce042a38c45
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Tue Nov 20 20:14:18 2007 +0100
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
- drivers/i2c : move i2c drivers to drivers/i2c
+commit 654f38b3a387886996a5a75771fbfc29cb4f225e
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 5 07:43:05 2007 +0100
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ ppc4xx: Make output a little shorter on PCIe detection
-commit 9a337ddc154a10a26f117fd147b009abcdeba75a
+ Now not max 3 lines but 2 lines are printed per PCIe port.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 992742a5b09d9040adbd156fb90756af66ade310
Author: Wolfgang Denk <wd@denx.de>
-Date: Mon Nov 19 22:20:24 2007 +0100
+Date: Sat Nov 3 23:09:27 2007 +0100
- Prepare for 1.3.0 release.
+ Cleanup coding style; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
-commit f30ad49b16bf998b03c1a5228b6c86369d61c258
-Author: Haiying Wang <Haiying.Wang@freescale.com>
-Date: Mon Nov 19 10:02:13 2007 -0500
+commit e881cb563e32f45832b7b6db77bdcd017adcbb41
+Author: Bruce Adler <bruce.adler@ccpu.com>
+Date: Fri Nov 2 13:15:42 2007 -0700
- Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
+ fix wording in README
- CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
+ Changed the wording to properly describe the shadowing
+ of the environment from ROM to RAM
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Bruce Adler <bruce.adler@acm.org>
-commit f8c320609366176b31104d9bf5e295232e1c7f1d
-Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
-Date: Mon Nov 19 11:14:16 2007 +0900
+commit ad845beef06245426c57b53dcdc01b7dc70e0d45
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Wed Oct 31 02:18:15 2007 +0900
- [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
+ blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
- lowlevel_init.S: Assembler messages:
- lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Looking at codes, the `memtest' and `clearmem' are intentional mixed
- use of `global symbols' and `label' for debugging purpose. To make it
- build, just disable global-symbols-use for now. As a result `memtest'
- still remains as unused, but leave it be...
+commit ec22755799466c8a103664bb3a5e647bf9c238f4
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Thu Oct 25 16:08:14 2007 +0300
- Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Trimmed some variables in ne2000.c
-commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
-Author: Wolfgang Denk <wd@denx.de>
-Date: Mon Nov 19 12:59:14 2007 +0100
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
- Fix build problems with mp2usb board
+commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Thu Oct 25 17:51:27 2007 +0800
- Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Fix the issue of usb_kbd driver missing the scan code of key 'z'.
-commit 6bf4c686afca1e86e1c384d59218f914605713bf
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Sun Nov 18 18:36:11 2007 +0100
+ The scan code of the key 'z' is 0x1d, which should be handled.
- s3c24x0: Fix usb_ohci.c missing in Makefile
- and usb_ohci.c warning differ in signedness
+ The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
+ controller.
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
-commit 6073f61e078da5ddb521b56256bcc36508589883
+commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Thu Oct 25 17:30:04 2007 +0800
+
+ Fix USB support issue for MPC8641HPCN board.
+
+ The configuration file has already enabled USB, but it
+ missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
+ on MPC8641HPCN can not work because of the wrong USB
+ register endian.
+
+ And add the USB command to U-Boot commands list.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit 4e62041023dc3de9d98d977bb080235bc6d035e0
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Sun Nov 18 12:55:02 2007 +0100
+Date: Wed Oct 24 18:16:01 2007 +0200
- pb1x00 board: Fix u16 status declaration when PCMCIA is defined
+ Use config_cmd_default.h instead of config_cmd_all.h
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
-Author: Wolfgang Denk <wd@denx.de>
-Date: Sun Nov 18 17:11:09 2007 +0100
+commit 56622f87857439b1c221e9deef11a9d5bb5d4308
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Oct 24 01:37:36 2007 +0200
- Fix compiler warnings for ARM systems.
+ TQM5200: Call usb_cpu_init() during board init
- Signed-off-by: Wolfgang Denk <wd@denx.de>
+ usb_cpu_init() configures GPS USB pins, clocks, etc. and
+ is required for proper operation of kernel USB subsystem.
+ This setup was previously done in the kernel by the fixup
+ code which is being removed, thus low level init must be
+ done by U-boot now.
-commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
-Author: Wolfgang Denk <wd@denx.de>
-Date: Sun Nov 18 16:36:27 2007 +0100
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
- Fix compiler warnings for PPC systems. Update CHANGELOG.
+commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Oct 23 16:25:50 2007 +0200
- Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Fix typo in nfs.c
-commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Sat Nov 17 11:31:10 2007 +0100
+ An obvious typo. Originally fixed in linkstation u-boot port.
- Fix warning differ in signedness in net/net.c and net/nfs.c
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
-commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
-Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-Date: Sat Nov 17 20:42:45 2007 +0900
+commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Oct 23 14:35:05 2007 +0200
- gth2.c: Fix a warning on gth2 build.
+ Fix a typo in cpu/mpc824x/interrupts.c
- gth2.c: In function 'misc_init_r':
- gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
+ Since December 2003 the timer_interrupt_cpu() function in
+ cpu/mpc824x/interrupts.c contains what seems to be a superfluous
+ parameter. Remove it.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
-commit 2309c130aa4c84b91bd874a41269c923eb61b555
+commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
+Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
+Date: Wed Oct 17 11:13:51 2007 +0200
+
+ add ft_cpu_setup(..) on mpc8260
+
+ Add ft_cpu_setup(..)-function to adapt it for use with libfdt
+ based on code from mpc5xxx
+
+ Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
+ --
+
+commit 6abd82e19ae93c0b4d104e50165e235915ec0875
+Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
+Date: Wed Oct 17 11:18:42 2007 +0200
+
+ changes for IDS8247 board support
+
+ To get the IDS8247 board working following are done:
+ - FCC2 is deactivated
+ - FCC1 is activated
+ - I2C is activated
+ - CFI driver is activated
+ - Adapted for use with LIBFDT
+
+ Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
+ --
+
+commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
Author: Stefan Roese <sr@denx.de>
-Date: Sat Nov 17 07:58:25 2007 +0100
+Date: Sat Nov 3 12:08:28 2007 +0100
- Fix warning differ in signedness in common/cmd_scsi.c
+ ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
+
+ This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
+ Again, only one image supports both targets.
Signed-off-by: Stefan Roese <sr@denx.de>
-commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
-Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-Date: Sat Nov 17 20:05:26 2007 +0900
+commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Oct 24 15:48:37 2007 +0200
- [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
+ ATSTK1002: Remove default ethernet addresses
- Current trick to pick up GNU assembler minor version does not work with the
- latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
- "(GNU Binutils) ".
+ Wolfgang is right: It's not a good idea to set up default initial
+ ethernet addresses for a board, even though they belong to the local
+ range.
- $ sde-as --version |grep "GNU assembler"
- GNU assembler 2.15.94 mipssde-6.02.02-20050602
- $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
- 2.15.94
- $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
- 15
- $
+ This will change the failure mode from "IT manager screams at you for
+ using duplicate ethernet addresses" to a nice error message explaining
+ that the ethernet address hasn't been set properly.
- $ mips-linux-as --version |grep "GNU assembler"
- GNU assembler (GNU Binutils) 2.18
- $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
- (GNU
- $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
- (no output)
- $
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- As a result of above, you'll see many noises with such binutils:
+commit e5c794e491a57d829b6d8733e2ed8368a2269abf
+Author: Justin Flammia <jflammia@savantav.com>
+Date: Mon Oct 29 17:40:35 2007 -0400
- make -C cpu/mips/
- /bin/sh: line 0: [: : integer expression expected
- /bin/sh: line 0: [: : integer expression expected
- make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
- mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
- /bin/sh: line 0: [: : integer expression expected
- mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
- /bin/sh: line 0: [: : integer expression expected
- mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
- /bin/sh: line 0: [: : integer expression expected
+ DHCP Client Fix
- This patch simplifies the trick and makes it work with both versions of gas.
- I also replace an expensive `awk (or gawk)' with `cut'.
+ This is a multi-part message in MIME format.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ commit e6e505eae94ed721e123e177489291fc4544b7b8
+ Author: Justin Flammia <jflammia@savantav.com>
+ Date: Mon Oct 29 17:19:03 2007 -0400
-commit 16664f72850846e645616da1c0fa5afcd6d15f15
-Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-Date: Sat Nov 17 20:05:26 2007 +0900
+ Found a bug in the way the DHCP Request packet is built, where the IP address
+ that is offered by the server is bound to prematurely. This patch is a fix of
+ that bug where the IP address offered by the DHCP server is not used until
+ after the DHCP ACK from the server is received.
- [MIPS] Remove useless instructions for initializing $gp.
+ Signed-off-by: Justin Flammia <jflammia@savantav.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+commit 5d96d40d3f36da33348e68f9ea993f383e11f997
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 20:58:34 2007 +0100
-commit 03c031d5660ea946c39af6e2e16267da857c609f
-Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-Date: Sat Oct 27 15:27:06 2007 +0900
+ ppc4xx: Fix acadia_nand build problem
- [MIPS] MIPS 4K core: Coding style cleanups
+ Since the cache handling functions were moved from start.S into cache.S
+ the acadia NAND booting Makfile needs to be adapted accordingly.
- No logical changes.
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 20:57:11 2007 +0100
-commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
-Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-Date: Sat Nov 17 20:05:20 2007 +0900
+ ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
+
+ This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
+ and to the Sequoia TLB init code. Now the cache can be enabled on 44x
+ boards by defining CONFIG_4xx_DCACHE in the board config file. This
+ option will disappear, when more boards use is successfully and no
+ more known problems exist.
+
+ This is tested successfully on Sequoia and Katmai. The only problem that
+ needs to be fixed is, that USB is not working on Sequoia right now, since
+ it will need some cache handling code too, similar to the 4xx EMAC driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
- [MIPS] gth2.c: Fix a warning on gth2 build.
+commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 20:51:10 2007 +0100
- gth2.c: In function 'misc_init_r':
- gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
+ ppc4xx: Enable CPU POST test for 4xx with dcache enabled
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Now with caches enabled (i- and d-cache) on 44x, we need a chance to
+ disable the cache for the CPU POST tests, since these tests consist
+ of self modifying code. This is done via the new change_tlb() function.
-commit 4fbd0741b2b6441da10be93e10267122581b7079
-Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-Date: Sat Oct 27 15:22:33 2007 +0900
+ Signed-off-by: Stefan Roese <sr@denx.de>
- [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
+commit f71b2888b4b3c870909a0341427b2a914246f81f
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 20:47:26 2007 +0100
- au1x00_eth.c: In function 'au1x00_miiphy_write':
- au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
+ ppc4xx: Change 4xx POST ethernet test to handle cached memory too
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ This patch enables the 4xx EMAC POST driver to work too, when dcache is
+ enabled.
-commit f01320459736f156707425cf8112f98606301aa4
-Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-Date: Sat Oct 27 15:00:25 2007 +0900
+ Signed-off-by: Stefan Roese <sr@denx.de>
- [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
+commit a2685904061b35a17583d65fe47cdc2686a69eaa
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 20:45:53 2007 +0100
- au1x00_eth.c: In function 'au1x00_enet_initialize':
- au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
- au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
- au1x00_eth.c:246: error: for each function it appears in.)
- au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
- au1x00_eth.c: In function 'au1x00_miiphy_write':
- au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
- make[1]: *** [au1x00_eth.o] Error 1
+ ppc4xx: Remove temporary TLB entry in POST cache test only for 440
- Fixed by moving these two functions forward.
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+commit ff768cb168d8157c24a25016dbfbeb465e47f420
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 18:01:24 2007 +0100
-commit b09258c5393edd1087c5f39ae68338f16b49f8b3
-Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-Date: Sat Oct 27 15:00:25 2007 +0900
+ ppc4xx: Change 4xx ethernet driver to handle cached memory too
- MAKEALL: Added missing pb1000 board
+ This patch enables the 4xx EMAC driver to work too, when dcache is
+ enabled.
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
-Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-Date: Sat Oct 27 15:00:24 2007 +0900
+commit 483e09a223c666269ef81d3573a6591b1046b0ef
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 17:59:22 2007 +0100
- [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
+ ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ This function is used to either turn cache on or off in a specific
+ memory area.
-commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
-Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-Date: Sat Oct 27 15:00:24 2007 +0900
+ Signed-off-by: Stefan Roese <sr@denx.de>
- [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
+commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 17:57:52 2007 +0100
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ ppc4xx: Remove cache definition from 4xx board config files
-commit 5947f6999aafa7c54c1390983d264a8463dfea8e
-Author: Wolfgang Denk <wd@denx.de>
-Date: Sat Nov 17 02:34:38 2007 +0100
+ All 4xx board config files don't need the cache definitions anymore.
+ These are now defined in common headers.
- Update CHANGELOIG, prepare for -rc4
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit 9b94ac61d2176185c30adf0793e079ec30e68687
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 31 17:55:58 2007 +0100
-commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
-Author: Luotao Fu <l.fu@pengutronix.de>
-Date: Wed Nov 14 18:58:33 2007 +0100
+ ppc4xx: Rework 4xx cache support
- Fix the i2c frequency and default address in rsdproto board
+ New cache handling functions added and all existing functions
+ moved from start.S into seperate cache.S.
- rsdproto board support has wrong I2C frequency and wrong return value
- handling.
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
+commit 06713773da4ac3d390c63d82641eb553224b27c2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 23 18:03:12 2007 +0200
-commit 429c180edad038f91c989cb14b478228092e7054
-Author: Wolfgang Denk <wd@denx.de>
-Date: Sat Nov 17 01:45:38 2007 +0100
+ ppc4xx: Remove compiler warning from previous commit
- powerpc: Backout relocation changes for MPC5121, too.
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Apply Grant Likely's backout to MPC5121 code, too.
+commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 23 14:40:30 2007 +0200
- Pointed out by Rafal Jaworowski <raj@semihalf.com>
+ ppc4xx: Remove temporary TLB entry in POST cache test
- Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Tue Nov 13 22:18:33 2007 -0700
+commit 1338e6a81834099ba19733b69aafd8ef5f098094
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 23 14:05:08 2007 +0200
- powerpc: Backout relocation changes.
+ ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
- Ugh. I *hate* to back this change out, but these compiler flags don't
- work for relocation on all versions of GCC. I've not been able to
- reproduce the environment in my setup (and hence, not been able to
- find a combination that *does* work), so I've got no choice but to go
- back to the old gcc flags and linker script.
+ I lately noticed, that newer 4xx board with GBit support sometimes don't
+ finish link autonegotiation in 4 seconds. Changing this timeout to 5
+ seconds seems fine here.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Tue Nov 13 09:11:05 2007 +0100
+commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 23 14:03:17 2007 +0200
- Fixed mips_io_port_base build errors.
+ ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
- This patch has been sent on:
- - 29 Sep 2007
+ This patch changes all in32/out32 calls to use the recommended in_be32/
+ out_be32 macros instead.
- Although mips_io_port_base is currently a part of IDE command, it is quite
- fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
- it to MIPS general part, and introduce `set_io_port_base()' from Linux.
+ Signed-off-by: Stefan Roese <sr@denx.de>
- This patch is triggered by multiple definition of `mips_io_port_base' build
- error on gth2 (and tb0229 also needs this fix.)
+commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Oct 25 12:24:59 2007 +0200
- board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
- /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
- common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
- make: *** [u-boot] Error 1
+ ppc4xx: Fix POST ethernet test for Haleakala
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ The POST ethernet test needed to be changed to dynamically determine
+ the count of ethernet devices. This code is cloned from the 4xx
+ ethernet driver.
-commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
-Author: Wolfgang Denk <wd@denx.de>
-Date: Sat Nov 17 01:30:40 2007 +0100
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Fix a bug in the slave serial programming mode for the Xilinx
- Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
- the most significant bit was set, which did not work on any
- architecture where "char" defaulted to be an unsigned type.
+commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 23 11:31:05 2007 +0200
- Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
+ ppc4xx: Correct UART input clock calculation and passing to fdt
- Signed-off-by: Wolfgang Denk <wd@denx.de>
+ We now use a value in the gd (global data) structure for the UART input
+ frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
+ in get_sys_info().
-commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Thu Nov 1 12:23:29 2007 -0500
+ Signed-off-by: Stefan Roese <sr@denx.de>
- 86xx: Fix broken variable reference when #def DEBUGing.
+commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 23 10:10:08 2007 +0200
- Sometimes you can't reference the DDR2 controller variables.
+ ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ The Haleakala is nearly identical with the Kilauea eval board. The only
+ difference is that the 405EXr only supports one EMAC and one PCIe
+ interface. This patch adds support for the Haleakala board by using
+ the identical image for Kilauea and Haleakala. The distinction is done
+ by comparing the PVR.
-commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
-Author: Jason Jin <Jason.jin@freescale.com>
-Date: Fri Oct 26 18:32:00 2007 +0800
+ Signed-off-by: Stefan Roese <sr@denx.de>
- make 8610 board use pixis reset
+commit 9f798766aa85e62eb8fa8c721e148df609b78137
+Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
+Date: Tue Oct 23 08:29:10 2007 +0200
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
-commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
-Author: Jason Jin <Jason.jin@freescale.com>
-Date: Mon Oct 29 19:26:21 2007 +0800
+ This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
- Unify pixis_reset altbank across board families
+ Note:
+ As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
+ DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
+ modules are still plugged in. So it is recommended to remove the DIMM
+ modules while using the NAND booting code with the fixed SDRAM setup!
- Basically, refactor the CFG_PIXIS_VBOOT_MASK values
- into the separate board config files.
+ Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 22 16:24:44 2007 +0200
-commit 64bf555465c7926be13e1046ac0d0f05ac72829c
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Wed Nov 7 08:19:21 2007 +0100
+ ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
- Fix warning: pointer targets in assignment differ in signedness
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+commit 3248f63ad89cb031491edb7016587fe6e9a238b9
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 22 16:22:40 2007 +0200
-commit 7a60ee7c6248a958c5757d3660a1702723a2786d
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Wed Nov 7 08:19:19 2007 +0100
+ ppc4xx: Rework of 4xx serial driver (4)
- Fix warning differ in signedness in common/cmd_ide.c
+ Change 4xx_uart.c:
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ - Use in_8/out_8 macros instead of in8/out8
+ - No need for UART_BASE marco anymore, now really handled via function
+ parameter
+ - serial_init_common() introduced
+ - Further coding style cleanup
-commit 4d4faae65e115e327425cd514c1a35146a85166b
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Mon Sep 24 09:05:31 2007 -0600
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Group PCI and PCMCIA drivers in drivers/Makefile
+commit e61cb8163a66b8a135696ae232e2bead1ce0a049
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 22 15:45:49 2007 +0200
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ ppc4xx: Rework of 4xx serial driver (3)
-commit 5798f87dc10a496d79d3177b9f5a76488987fd35
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Mon Sep 24 09:05:31 2007 -0600
+ Change all linker scripts to reference the changed driver name iop480_uart.o.
- Group block/flash drivers in drivers/Makefile
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+commit 882ae41274921f9016131806bdeb27e19606f47a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 22 15:44:39 2007 +0200
-commit df58c81551700f058b44cacf55a7997fa63bfe0a
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Mon Sep 24 09:05:31 2007 -0600
+ ppc4xx: Rework of 4xx serial driver (2)
- Group USB drivers in drivers/Makefile
+ Change all linker scripts to reference the changed driver name 4xx_uart.o.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Note: In most cased all these explicit referencing of these object files
+ in the linker scripts is not neccessary. Only for manually embedded
+ environment into the U-Boot image, which is not done is most cases.
-commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Mon Sep 24 09:05:30 2007 -0600
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Group i2c drivers in drivers/Makefile
+commit ad31e40bed042cb670d0036fea96435007afb838
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 22 15:09:59 2007 +0200
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ ppc4xx: Rework of 4xx serial driver (1)
-commit ec00c76de0e5971273905998d62d6bb119324218
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Mon Sep 24 09:05:30 2007 -0600
+ This patch starts the rework of the PPC4xx serial driver. First we split
+ the file into two seperate files, one 4xx_uart.c with the 405/440 UART
+ handling code and the other one iop480_uart.c with the UART code for the
+ PLX-Tech IOP480 PPC (PPC403 based).
- Group console drivers in drivers/Makefile
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+commit 764e7417ee5f6e25b1715720e7d7dd3487109385
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 22 10:30:38 2007 +0200
-commit 754f230aa01b8c789fc31f8013c2487954073300
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Mon Sep 24 09:05:30 2007 -0600
+ ppc4xx: Correct UART input clock calculation and passing to fdt
- Group network drivers in drivers/Makefile
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 22 07:34:34 2007 +0200
-commit f0037c56b0d12cd46215124667b9f83d60ef9391
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Mon Sep 24 09:05:30 2007 -0600
+ ppc4xx: Add initial AMCC Makalu 405EX support
- Build: split COBJS value into multiple lines
+ Signed-off-by: Stefan Roese <sr@denx.de>
- This change is in preparation for condtitionial compile support in the
- build system. By spliting them all into seperate lines now, subsequent
- patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
- be less invasive and easier to review
+commit fa8aea20456e6f1dba43f46bcc72024dd9499998
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 22 07:33:52 2007 +0200
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ ppc4xx: Add freqUART to CPU speed detection
-commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Mon Sep 24 09:05:30 2007 -0600
+ This value is needed later for the device tree configuration of
+ the uart clock.
- Add .gitignore files
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
- Acked-by: Kim Phillips <kim.phillips@freescale.com>
+commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
+Author: Stefan Roese <sr@denx.de>
+Date: Sun Oct 21 14:26:29 2007 +0200
-commit 955413f35f054a82e40042f1dbcf501c6a05719b
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Thu Nov 15 08:27:52 2007 -0700
+ ppc: Small Kilauea cleanup of config file
- Revert "Correct relocation fixup for mpc5xx"
+ Signed-off-by: Stefan Roese <sr@denx.de>
- This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+commit 758c037aeead34b49631b8da3a90b1bba14c0410
+Author: Stefan Roese <sr@denx.de>
+Date: Sun Oct 21 08:16:12 2007 +0200
-commit e15633888a058aacb31a62d2cf1278e1e4c236ab
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Thu Nov 15 08:24:32 2007 -0700
+ rtc: Add Xicor/Intersil X1205 RTC support
- Revert "Correct fixup relocation for MPC5xxx"
+ This patch adds support for the Xicor/Intersil X1205 RTC used on the
+ AMCC Makalu eval board. This driver is basically cloned from the Linux
+ driver version (2.6.23).
- This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ This patch also introduces the Linux bcd.h header for the BCD2BIN/
+ BIN2BCD conversions. In the future some of the other U-Boot RTC driver
+ should be converted to also use this header instead of implementing
+ their own local copy of these functions/macros.
-commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Thu Nov 15 08:21:04 2007 -0700
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Revert "Correct fixup relocation for mpc8220"
+commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
+Author: Stefan Roese <sr@denx.de>
+Date: Sun Oct 21 08:12:41 2007 +0200
- This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
-commit 70922342369e5e39b286fe21e768a239ca07a514
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Thu Nov 15 08:20:57 2007 -0700
+ This patch moves some common 4xx macros and the PPC405_SYS_INFO/
+ PPC440_SYS_INFO structure into the common ppc4xx.h header.
- Revert "Correct fixup relocation for mpc824x"
+ Lot's of other macros are good candidates to be consolidated this way
+ in the future.
- This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Thu Nov 15 08:20:50 2007 -0700
+commit 770c7af5800f598d22730d1f4b70f16c9b33512e
+Author: Stefan Roese <sr@denx.de>
+Date: Sun Oct 21 08:05:18 2007 +0200
- Revert "Correct fixup relocation for mpc8260"
+ ppc4xx: Fix size setup in Kilauea DDR2 init routine
- This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ The size was initilized wrong. Instead of 256MB, the DDR2 controller
+ was setup to 512MB. Now the correct values is used.
-commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Thu Nov 15 08:20:43 2007 -0700
+ This patch also does a little cleanup and adds a comment here.
- Revert "Correct fixup relocation for mpc83xx"
+ Signed-off-by: Stefan Roese <sr@denx.de>
- This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
+Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
+Date: Thu Oct 18 17:29:04 2007 +0200
-commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Thu Nov 15 08:20:25 2007 -0700
+ ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
- Revert "[MPC512x] Correct fixup relocation"
+ CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
+ number is used to access system registers.
- This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
+commit c36c68160333ac5fe41ec3db12a728b7075b3912
Author: Stefan Roese <sr@denx.de>
-Date: Tue Nov 13 08:18:20 2007 +0100
+Date: Thu Oct 18 07:42:27 2007 +0200
- ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
+ ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
- Signed-off-by: Stefan Roese <sr@denx.de>
+ On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
+ is the internal SRAM. Since I now ported and tested this endpoint mode
+ on Kilauea successfully to map to 0 (SDRAM), I also changed this for
+ Katmai.
-commit 1ce55151c85d068f70317a8d65c61058b891afb4
-Author: Heiko Schocher <hs@denx.de>
-Date: Tue Nov 13 07:50:29 2007 +0100
+ Yucca will stay at internal SRAM for now. Not sure if somebody relies on
+ this setup.
- [UC101] SRAM now with 2 MB working.
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Heiko Schocher <hs@denx.de>
+commit 5cb4af4791f61843432155142b6cfac901f66c10
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Oct 18 07:39:38 2007 +0200
-commit 8d737a28152ec12873f8544cca1fb39a49e5e693
-Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
-Date: Thu Nov 8 12:50:18 2007 -0600
+ ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
- ColdFire: MCF5329 - Remove reset registers from CCM
+ This patch adds endpoint support for the AMCC Kilauea eval board. It can
+ be tested by connecting a reworked PCIe cable (only 1x lane singles
+ connected) to another root-complex.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ In this test setup, a 64MB inbound window is configured at BAR0 which maps
+ to 0 on the PLB side. So accessing this BAR0 from the root-complex will
+ access the first 64MB of the SDRAM on the PPC side.
-commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
-Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
-Date: Thu Nov 8 12:31:11 2007 -0600
+ Signed-off-by: Stefan Roese <sr@denx.de>
- ColdFire: MCF5329 - Add Reset structure to immap_5329.h
+commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 13 16:43:23 2007 +0200
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
-commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
-Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
-Date: Thu Nov 8 12:19:01 2007 -0600
+ This patch adds support for dynamic configuration of PCIe ports for the
+ AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
+ boards Yucca & Katmai and the 405EX board Kilauea.
- ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
+ This dynamic configuration is done via the "pcie_mode" environement
+ variable. This variable can be set to "EP" or "RP" for endpoint or
+ rootpoint mode. Multiple values can be joined via the ":" delimiter.
+ Here an example:
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ pcie_mode=RP:EP:EP
-commit 225a24b5e062ad94627424508ae814f51dbe1a34
-Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
-Date: Wed Nov 7 18:00:54 2007 -0600
+ This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
+ as endpoint.
- ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
+ Per default Yucca will be configured as:
+ pcie_mode=RP:EP:EP
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ Per default Katmai will be configured as:
+ pcie_mode=RP:RP:REP
-commit 248c7c14835f34d5d910b45e5600050e58ca6cab
-Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
-Date: Wed Nov 7 17:56:15 2007 -0600
+ Per default Kilauea will be configured as:
+ pcie_mode=RP:RP
- ColdFire: MCF532x - Update do_reset() using core reset
+ Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Oct 11 11:15:59 2007 +0200
-commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
-Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
-Date: Wed Nov 7 17:51:00 2007 -0600
+ ppc4xx: Enable device tree support (fdt) on Kilauea per default
- ColdFire: Update cpu flag for 4.2-xx compiler
+ This patch enables the fdt support on the AMCC Kilauea eval board.
+ Additionally now EBC ranges fdt fixup is included to support NOR
+ FLASH mapping via the Linux physmap_of driver.
- Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+ This Kilauea port now support booting arch/ppc and arch/powerpc
+ Linux kernels. The default environment "net_nfs" is for arch/ppc
+ and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
+ support will be removed.
-commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
-Author: Roy Zang <tie-fei.zang@freescale.com>
-Date: Mon Nov 5 17:39:24 2007 +0800
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Implement general ULi 526x Ethernet driver support in U-boot
+commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Oct 11 11:11:45 2007 +0200
- This patch implements general ULi 526x Ethernet driver.
- Until now, it is the only native Ethernet port on
- MPC8610HPCD board, but it could be used on other boards
- with ULi 526x Ethernet port as well.
+ ppc4xx: Add additional debug info to 4xx fdt support
- Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
-Author: Larry Johnson <lrj@arlinx.com>
-Date: Thu Nov 1 08:46:50 2007 -0500
+commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 21:28:58 2007 +0200
- NET: Add Ethernet 1000BASE-X support for PPC4xx
+ ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
- This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
- "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
- returns non-zero iff the PHY registers are configured for 1000BASE-X. The
- "mii info" command is modified to distinguish between 1000BASE-T and -X.
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Larry Johnson <lrj@acm.org>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
+commit 1941cce71b1ae975602854045061e82f94ecd012
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 17:35:10 2007 +0200
-commit 298035df4948b113d29ac0e694717d34b95bc5dc
-Author: Larry Johnson <lrj@arlinx.com>
-Date: Wed Oct 31 11:21:29 2007 -0500
+ ppc4xx: Fix small merge problem in 4xx_enet.c
- NET: Cosmetic changes
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Larry Johnson <lrj@acm.org>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
+commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 17:11:30 2007 +0200
-commit 992742a5b09d9040adbd156fb90756af66ade310
-Author: Wolfgang Denk <wd@denx.de>
-Date: Sat Nov 3 23:09:27 2007 +0100
+ ppc4xx: Add initial AMCC Kilauea 405EX support
- Cleanup coding style; update CHANGELOG
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit dbbd125721aea6645fdb962f36bd41f59e272f9d
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 17:10:59 2007 +0200
-commit e881cb563e32f45832b7b6db77bdcd017adcbb41
-Author: Bruce Adler <bruce.adler@ccpu.com>
-Date: Fri Nov 2 13:15:42 2007 -0700
+ ppc4xx: Add PPC405EX support
- fix wording in README
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Changed the wording to properly describe the shadowing
- of the environment from ROM to RAM
+commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 17:09:36 2007 +0200
- Signed-off-by: Bruce Adler <bruce.adler@acm.org>
+ ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
-commit ad845beef06245426c57b53dcdc01b7dc70e0d45
-Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
-Date: Wed Oct 31 02:18:15 2007 +0900
+ Signed-off-by: Stefan Roese <sr@denx.de>
- blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
+commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 17:07:50 2007 +0200
- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
-commit ec22755799466c8a103664bb3a5e647bf9c238f4
-Author: Vlad Lungu <vlad@comsys.ro>
-Date: Thu Oct 25 16:08:14 2007 +0300
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Trimmed some variables in ne2000.c
+commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 17:04:57 2007 +0200
- Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+ POST: Add 405EX support to 4xx UART POST test
-commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
-Author: Zhang Wei <wei.zhang@freescale.com>
-Date: Thu Oct 25 17:51:27 2007 +0800
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Fix the issue of usb_kbd driver missing the scan code of key 'z'.
+commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 15:10:02 2007 +0200
- The scan code of the key 'z' is 0x1d, which should be handled.
+ DTT: Prepare DS1775 driver for use of different I2C addresses
- The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
- controller.
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+commit 19e93b1e16d267220440d827b920fbad8abfa70f
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 14:23:43 2007 +0200
-commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
-Author: Zhang Wei <wei.zhang@freescale.com>
-Date: Thu Oct 25 17:30:04 2007 +0800
+ ppc4xx: 4xx_pcie: Change PCIe status output to match common style
- Fix USB support issue for MPC8641HPCN board.
+ Signed-off-by: Stefan Roese <sr@denx.de>
- The configuration file has already enabled USB, but it
- missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
- on MPC8641HPCN can not work because of the wrong USB
- register endian.
+commit ff68f66bcb0da847845aa2fac11eba6c25938c99
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 09:22:33 2007 +0200
- And add the USB command to U-Boot commands list.
+ ppc4xx: 4xx_pcie: Disable debug output as default
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-commit 4e62041023dc3de9d98d977bb080235bc6d035e0
-Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Date: Wed Oct 24 18:16:01 2007 +0200
+commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 09:18:23 2007 +0200
- Use config_cmd_default.h instead of config_cmd_all.h
+ ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
- Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-commit 56622f87857439b1c221e9deef11a9d5bb5d4308
-Author: Marian Balakowicz <m8@semihalf.com>
-Date: Wed Oct 24 01:37:36 2007 +0200
+commit 4dbee8a90df613eb517aadbecebd70f168913d30
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 5 07:57:20 2007 +0200
- TQM5200: Call usb_cpu_init() during board init
+ ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
- usb_cpu_init() configures GPS USB pins, clocks, etc. and
- is required for proper operation of kernel USB subsystem.
- This setup was previously done in the kernel by the fixup
- code which is being removed, thus low level init must be
- done by U-boot now.
+ 128MB seems to be the smallest possible value for the memory size
+ for on PCIe port. With this change now the BAR's of the PCIe cards
+ are accessible under U-Boot.
- Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ One big note: This only works for PCIe port 0 & 1. For port 2 this
+ currently doesn't work, since the base address is now 0xc0000000
+ (0xb0000000 + 2 * 0x08000000), and this is already occupied by
+ CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
+ to change the base addresses completely and this change would have
+ too much impact right now.
-commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
-Author: Guennadi Liakhovetski <lg@denx.de>
-Date: Tue Oct 23 16:25:50 2007 +0200
+ This patch adds debug output to the 4xx pcie driver too.
- Fix typo in nfs.c
+ Signed-off-by: Stefan Roese <sr@denx.de>
- An obvious typo. Originally fixed in linkstation u-boot port.
+commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 3 21:16:32 2007 +0200
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
-commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
-Author: Guennadi Liakhovetski <lg@denx.de>
-Date: Tue Oct 23 14:35:05 2007 +0200
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Fix a typo in cpu/mpc824x/interrupts.c
+commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 3 15:01:02 2007 +0200
- Since December 2003 the timer_interrupt_cpu() function in
- cpu/mpc824x/interrupts.c contains what seems to be a superfluous
- parameter. Remove it.
+ ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
- Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ These files were introduced with the IBM 405GP but are currently used on all
+ 4xx PPC platforms. So the name doesn't match the content anymore. This patch
+ renames the files to 4xx_pci.c/h.
-commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
-Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
-Date: Wed Oct 17 11:13:51 2007 +0200
+ Signed-off-by: Stefan Roese <sr@denx.de>
- add ft_cpu_setup(..) on mpc8260
+commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 3 14:14:58 2007 +0200
- Add ft_cpu_setup(..)-function to adapt it for use with libfdt
- based on code from mpc5xxx
+ ppc4xx: Add a comment for 405EX PCIe endpoint configuration
- Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
- --
+ Signed-off-by: Stefan Roese <sr@denx.de>
-commit 6abd82e19ae93c0b4d104e50165e235915ec0875
-Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
-Date: Wed Oct 17 11:18:42 2007 +0200
+commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 3 10:38:09 2007 +0200
- changes for IDS8247 board support
+ ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
- To get the IDS8247 board working following are done:
- - FCC2 is deactivated
- - FCC1 is activated
- - I2C is activated
- - CFI driver is activated
- - Adapted for use with LIBFDT
+ (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
+ the SDR registers of the PCIe ports. This makes the overall design
+ clearer, since it removed a lot of switch statements which are not
+ needed anymore.
- Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
- --
+ Also, the functions ppc4xx_init_pcie_rootport() and
+ ppc4xx_init_pcie_entport() are merged into a single function
+ ppc4xx_init_pcie_port(), since most of the code was duplicated.
+ This makes maintainance and porting to other 4xx platforms
+ easier.
-commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Wed Oct 24 15:48:37 2007 +0200
+ Signed-off-by: Stefan Roese <sr@denx.de>
- ATSTK1002: Remove default ethernet addresses
+commit 026f71106871f31d17d0ea0db9a7547ff92934bc
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 3 07:48:09 2007 +0200
- Wolfgang is right: It's not a good idea to set up default initial
- ethernet addresses for a board, even though they belong to the local
- range.
+ ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
- This will change the failure mode from "IT manager screams at you for
- using duplicate ethernet addresses" to a nice error message explaining
- that the ethernet address hasn't been set properly.
+ This patch is the first patch of a series to make the 440SPe PCIe code
+ usable on different 4xx PPC platforms. In preperation for the new 405EX
+ which is also equipped with PCIe interfaces.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ (2) This patch renames the functions from 440spe_ to 4xx_ with a
+ little additional cleanup
-commit e5c794e491a57d829b6d8733e2ed8368a2269abf
-Author: Justin Flammia <jflammia@savantav.com>
-Date: Mon Oct 29 17:40:35 2007 -0400
+ Signed-off-by: Stefan Roese <sr@denx.de>
- DHCP Client Fix
+commit c7c6da23028f146d912514b95aefa3da7cf37699
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 3 07:34:10 2007 +0200
- This is a multi-part message in MIME format.
+ ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
- commit e6e505eae94ed721e123e177489291fc4544b7b8
- Author: Justin Flammia <jflammia@savantav.com>
- Date: Mon Oct 29 17:19:03 2007 -0400
+ This patch is the first patch of a series to make the 440SPe PCIe code
+ usable on different 4xx PPC platforms. In preperation for the new 405EX
+ which is also equipped with PCIe interfaces.
- Found a bug in the way the DHCP Request packet is built, where the IP address
- that is offered by the server is bound to prematurely. This patch is a fix of
- that bug where the IP address offered by the DHCP server is not used until
- after the DHCP ACK from the server is received.
+ (1) This patch renames the files from 440spe_pcie to 4xx_pcie
- Signed-off-by: Justin Flammia <jflammia@savantav.com>
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
commit 31548249decf18a6b877a18436b6139dd483fe4a
Author: Justin Flammia <jflammia@savantav.com>
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 16 15:27:43 2007 -0500
+
+ Initial mpc8610hpcd Makefile files.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 16 15:26:51 2007 -0500
+
+ Initial mpc8610hpcd cpu/, README and include/ files.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 16 13:54:01 2007 -0500
+
+ Initial mpc8610hpcd board files.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
Author: runet@innovsys.com <runet@innovsys.com>
Date: Tue Oct 16 14:50:40 2007 -0500
D: Support for SSV ADNP/ESC1 (Nios Cyclone)
W: http://www.li-pro.net
+N: Dave Liu
+E: daveliu@freescale.com
+D: Support for MPC832x, MPC8360, MPC837x
+W: www.freescale.com
+
N: Raymond Lo
E: lo@routefree.com
D: Support for DOS partitions
Dave Liu <daveliu@freescale.com>
+ MPC832XEMDS MPC832x
MPC8360EMDS MPC8360
+ MPC837XEMDS MPC837x
Nye Liu <nyet@zumanetworks.com>
MPC8349ITXGP \
MPC8360EMDS \
MPC8360EMDS_ATM \
+ MPC837XEMDS \
sbc8349 \
TQM834x \
"
#########################################################################
LIST_86xx=" \
+ MPC8610HPCD \
MPC8641HPCN \
sbc8641d \
"
LIST_ARM11=" \
cp1136 \
omap2420h4 \
+ apollon \
"
#########################################################################
fi ;
@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
+MPC837XEMDS_config \
+MPC837XEMDS_HOST_config: unconfig
+ @mkdir -p $(obj)include
+ @echo "" >$(obj)include/config.h ; \
+ if [ "$(findstring _HOST_,$@)" ] ; then \
+ echo -n "... PCI HOST " ; \
+ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+ fi ;
+ @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
+
sbc8349_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
## MPC86xx Systems
#########################################################################
+MPC8610HPCD_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
+
MPC8641HPCN_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
#########################################################################
## ARM1136 Systems
#########################################################################
-omap2420h4_config : unconfig
+omap2420h4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4
+apollon_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm1136 apollon
+
#========================================================================
# i386
#========================================================================
SPI configuration items (port pins to use, etc). For
an example, see include/configs/sacsng.h.
-- FPGA Support: CONFIG_FPGA_COUNT
+- FPGA Support: CONFIG_FPGA
- Specify the number of FPGA devices to support.
+ Enables FPGA subsystem.
+
+ CONFIG_FPGA_<vendor>
+
+ Enables support for specific chip vendors.
+ (ALTERA, XILINX)
- CONFIG_FPGA
+ CONFIG_FPGA_<family>
- Used to specify the types of FPGA devices. For example,
- #define CONFIG_FPGA CFG_XILINX_VIRTEX2
+ Enables support for FPGA family.
+ (SPARTAN2, SPARTAN3, VIRTEX2, CYCLONE2, ACEX1K, ACEX)
+
+ CONFIG_FPGA_COUNT
+
+ Specify the number of FPGA devices to support.
CFG_FPGA_PROG_FEEDBACK
/*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
return 0;
}
+/*
+ * Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with
+ * board specific values.
+ */
+u32 ddr_wrdtr(u32 default_val) {
+ return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_180_DEG_ADV | 0x823);
+}
+
+u32 ddr_clktr(u32 default_val) {
+ return (SDRAM_CLKTR_CLKP_90_DEG_ADV);
+}
+
#if defined(CFG_DRAM_TEST)
int testdram (void)
{
#include <asm/io.h>
#include <ppc440.h>
-#include "sdram.h"
-
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \
- defined(CONFIG_DDR_DATA_EYE)
-/*-----------------------------------------------------------------------------+
- * wait_for_dlllock.
- +----------------------------------------------------------------------------*/
-static int wait_for_dlllock(void)
-{
- unsigned long val;
- int wait = 0;
-
- /* -----------------------------------------------------------+
- * Wait for the DCC master delay line to finish calibration
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_17);
- val = DDR0_17_DLLLOCKREG_UNLOCKED;
-
- while (wait != 0xffff) {
- val = mfdcr(ddrcfgd);
- if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED)
- /* dlllockreg bit on */
- return 0;
- else
- wait++;
- }
- debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
- debug("Waiting for dlllockreg bit to raise\n");
-
- return -1;
-}
-#endif
-
-#if defined(CONFIG_DDR_DATA_EYE)
/*-----------------------------------------------------------------------------+
- * wait_for_dram_init_complete.
- +----------------------------------------------------------------------------*/
-int wait_for_dram_init_complete(void)
-{
- unsigned long val;
- int wait = 0;
-
- /* --------------------------------------------------------------+
- * Wait for 'DRAM initialization complete' bit in status register
- * -------------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_00);
-
- while (wait != 0xffff) {
- val = mfdcr(ddrcfgd);
- if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
- /* 'DRAM initialization complete' bit */
- return 0;
- else
- wait++;
- }
-
- debug("DRAM initialization complete bit in status register did not rise\n");
-
- return -1;
-}
-
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-/*-----------------------------------------------------------------------------+
- * denali_core_search_data_eye.
- +----------------------------------------------------------------------------*/
-void denali_core_search_data_eye(unsigned long memory_size)
-{
- int k, j;
- u32 val;
- u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
- u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
- u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
- u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
- volatile u32 *ram_pointer;
- u32 test[NUM_TRIES] = {
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
-
- ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE);
-
- for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
- /*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
-
- /* -----------------------------------------------------------+
- * De-assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- /* -----------------------------------------------------------+
- * Set 'wr_dqs_shift'
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_09);
- val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
- | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
- mtdcr(ddrcfgd, val);
-
- /* -----------------------------------------------------------+
- * Set 'dqs_out_shift' = wr_dqs_shift + 32
- * ----------------------------------------------------------*/
- dqs_out_shift = wr_dqs_shift + 32;
- mtdcr(ddrcfga, DDR0_22);
- val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
- | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
- mtdcr(ddrcfgd, val);
-
- passing_cases = 0;
-
- for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
- /*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
- /* -----------------------------------------------------------+
- * Set 'dll_dqs_delay_X'.
- * ----------------------------------------------------------*/
- /* dll_dqs_delay_0 */
- mtdcr(ddrcfga, DDR0_17);
- val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
- | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* dll_dqs_delay_1 to dll_dqs_delay_4 */
- mtdcr(ddrcfga, DDR0_18);
- val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
- | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* dll_dqs_delay_5 to dll_dqs_delay_8 */
- mtdcr(ddrcfga, DDR0_19);
- val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
- | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
-
- ppcMsync();
- ppcMbar();
-
- /* -----------------------------------------------------------+
- * Assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
- mtdcr(ddrcfgd, val);
-
- ppcMsync();
- ppcMbar();
-
- /* -----------------------------------------------------------+
- * Wait for the DCC master delay line to finish calibration
- * ----------------------------------------------------------*/
- if (wait_for_dlllock() != 0) {
- printf("dlllock did not occur !!!\n");
- printf("denali_core_search_data_eye!!!\n");
- printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
- wr_dqs_shift, dll_dqs_delay_X);
- hang();
- }
- ppcMsync();
- ppcMbar();
-
- if (wait_for_dram_init_complete() != 0) {
- printf("dram init complete did not occur !!!\n");
- printf("denali_core_search_data_eye!!!\n");
- printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
- wr_dqs_shift, dll_dqs_delay_X);
- hang();
- }
- udelay(100); /* wait 100us to ensure init is really completed !!! */
-
- /* write values */
- for (j=0; j<NUM_TRIES; j++) {
- ram_pointer[j] = test[j];
-
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
- }
-
- /* read values back */
- for (j=0; j<NUM_TRIES; j++) {
- for (k=0; k<NUM_READS; k++) {
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-
- if (ram_pointer[j] != test[j])
- break;
- }
-
- /* read error */
- if (k != NUM_READS)
- break;
- }
-
- /* See if the dll_dqs_delay_X value passed.*/
- if (j < NUM_TRIES) {
- /* Failed */
- passing_cases = 0;
- /* break; */
- } else {
- /* Passed */
- if (passing_cases == 0)
- dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
- passing_cases++;
- if (passing_cases >= max_passing_cases) {
- max_passing_cases = passing_cases;
- wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
- dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
- dll_dqs_delay_X_end_window = dll_dqs_delay_X;
- }
- }
-
- /* -----------------------------------------------------------+
- * De-assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
-
- } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
-
- /* -----------------------------------------------------------+
- * Largest passing window is now detected.
- * ----------------------------------------------------------*/
-
- /* Compute dll_dqs_delay_X value */
- dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
- wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
-
- debug("DQS calibration - Window detected:\n");
- debug("max_passing_cases = %d\n", max_passing_cases);
- debug("wr_dqs_shift = %d\n", wr_dqs_shift);
- debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X);
- debug("dll_dqs_delay_X window = %d - %d\n",
- dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
-
- /* -----------------------------------------------------------+
- * De-assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- /* -----------------------------------------------------------+
- * Set 'wr_dqs_shift'
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_09);
- val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
- | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
- mtdcr(ddrcfgd, val);
- debug("DDR0_09=0x%08lx\n", val);
-
- /* -----------------------------------------------------------+
- * Set 'dqs_out_shift' = wr_dqs_shift + 32
- * ----------------------------------------------------------*/
- dqs_out_shift = wr_dqs_shift + 32;
- mtdcr(ddrcfga, DDR0_22);
- val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
- | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
- mtdcr(ddrcfgd, val);
- debug("DDR0_22=0x%08lx\n", val);
-
- /* -----------------------------------------------------------+
- * Set 'dll_dqs_delay_X'.
- * ----------------------------------------------------------*/
- /* dll_dqs_delay_0 */
- mtdcr(ddrcfga, DDR0_17);
- val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
- | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_17=0x%08lx\n", val);
-
- /* dll_dqs_delay_1 to dll_dqs_delay_4 */
- mtdcr(ddrcfga, DDR0_18);
- val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
- | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_18=0x%08lx\n", val);
-
- /* dll_dqs_delay_5 to dll_dqs_delay_8 */
- mtdcr(ddrcfga, DDR0_19);
- val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
- | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_19=0x%08lx\n", val);
-
- /* -----------------------------------------------------------+
- * Assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
- mtdcr(ddrcfgd, val);
-
- ppcMsync();
- ppcMbar();
-
- /* -----------------------------------------------------------+
- * Wait for the DCC master delay line to finish calibration
- * ----------------------------------------------------------*/
- if (wait_for_dlllock() != 0) {
- printf("dlllock did not occur !!!\n");
- hang();
- }
- ppcMsync();
- ppcMbar();
-
- if (wait_for_dram_init_complete() != 0) {
- printf("dram init complete did not occur !!!\n");
- hang();
- }
- udelay(100); /* wait 100us to ensure init is really completed !!! */
-}
-#endif /* CONFIG_DDR_DATA_EYE */
+ * Prototypes
+ *-----------------------------------------------------------------------------*/
+extern int denali_wait_for_dlllock(void);
+extern void denali_core_search_data_eye(void);
#if defined(CONFIG_NAND_SPL)
/* Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
mtsdram(DDR0_44, 0x00000003);
mtsdram(DDR0_02, 0x00000001);
- wait_for_dlllock();
+ denali_wait_for_dlllock();
#endif /* #ifndef CONFIG_NAND_U_BOOT */
#ifdef CONFIG_DDR_DATA_EYE
/* -----------------------------------------------------------+
* Perform data eye search if requested.
* ----------------------------------------------------------*/
- denali_core_search_data_eye(CFG_MBYTES_SDRAM << 20);
+ denali_core_search_data_eye();
#endif
return (CFG_MBYTES_SDRAM << 20);
+++ /dev/null
-/*
- * (C) Copyright 2006
- * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
- * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
- * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SPD_SDRAM_DENALI_H_
-#define _SPD_SDRAM_DENALI_H_
-
-#define ppcMsync sync
-#define ppcMbar eieio
-
-/* General definitions */
-#define MAX_SPD_BYTE 128 /* highest SPD byte # to read */
-#define DENALI_REG_NUMBER 45 /* 45 Regs in PPC440EPx Denali Core */
-#define SUPPORTED_DIMMS_NB 7 /* Number of supported DIMM modules types */
-#define SDRAM_NONE 0 /* No DIMM detected in Slot */
-#define MAXRANKS 2 /* 2 ranks maximum */
-
-/* Supported PLB Frequencies */
-#define PLB_FREQ_133MHZ 133333333
-#define PLB_FREQ_152MHZ 152000000
-#define PLB_FREQ_160MHZ 160000000
-#define PLB_FREQ_166MHZ 166666666
-
-/* Denali Core Registers */
-#define SDRAM_DCR_BASE 0x10
-
-#define DDR_DCR_BASE 0x10
-#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */
-#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */
-
-/*-----------------------------------------------------------------------------+
- | Values for ddrcfga register - indirect addressing of these regs
- +-----------------------------------------------------------------------------*/
-
-#define DDR0_00 0x00
-#define DDR0_00_INT_ACK_MASK 0x7F000000 /* Write only */
-#define DDR0_00_INT_ACK_ALL 0x7F000000
-#define DDR0_00_INT_ACK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_00_INT_ACK_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-/* Status */
-#define DDR0_00_INT_STATUS_MASK 0x00FF0000 /* Read only */
-/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
-#define DDR0_00_INT_STATUS_BIT0 0x00010000
-/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
-#define DDR0_00_INT_STATUS_BIT1 0x00020000
-/* Bit2. Single correctable ECC event detected */
-#define DDR0_00_INT_STATUS_BIT2 0x00040000
-/* Bit3. Multiple correctable ECC events detected. */
-#define DDR0_00_INT_STATUS_BIT3 0x00080000
-/* Bit4. Single uncorrectable ECC event detected. */
-#define DDR0_00_INT_STATUS_BIT4 0x00100000
-/* Bit5. Multiple uncorrectable ECC events detected. */
-#define DDR0_00_INT_STATUS_BIT5 0x00200000
-/* Bit6. DRAM initialization complete. */
-#define DDR0_00_INT_STATUS_BIT6 0x00400000
-/* Bit7. Logical OR of all lower bits. */
-#define DDR0_00_INT_STATUS_BIT7 0x00800000
-
-#define DDR0_00_INT_STATUS_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_00_INT_STATUS_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_00_DLL_INCREMENT_MASK 0x00007F00
-#define DDR0_00_DLL_INCREMENT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_00_DLL_INCREMENT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_00_DLL_START_POINT_MASK 0x0000007F
-#define DDR0_00_DLL_START_POINT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_00_DLL_START_POINT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-
-#define DDR0_01 0x01
-#define DDR0_01_PLB0_DB_CS_LOWER_MASK 0x1F000000
-#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_01_PLB0_DB_CS_UPPER_MASK 0x001F0000
-#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
-#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n) ((((unsigned long)(n))>>16)&0x1F)
-#define DDR0_01_OUT_OF_RANGE_TYPE_MASK 0x00000700 /* Read only */
-#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
-#define DDR0_01_INT_MASK_MASK 0x000000FF
-#define DDR0_01_INT_MASK_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_01_INT_MASK_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
-#define DDR0_01_INT_MASK_ALL_ON 0x000000FF
-#define DDR0_01_INT_MASK_ALL_OFF 0x00000000
-
-#define DDR0_02 0x02
-#define DDR0_02_MAX_CS_REG_MASK 0x02000000 /* Read only */
-#define DDR0_02_MAX_CS_REG_ENCODE(n) ((((unsigned long)(n))&0x2)<<24)
-#define DDR0_02_MAX_CS_REG_DECODE(n) ((((unsigned long)(n))>>24)&0x2)
-#define DDR0_02_MAX_COL_REG_MASK 0x000F0000 /* Read only */
-#define DDR0_02_MAX_COL_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<16)
-#define DDR0_02_MAX_COL_REG_DECODE(n) ((((unsigned long)(n))>>16)&0xF)
-#define DDR0_02_MAX_ROW_REG_MASK 0x00000F00 /* Read only */
-#define DDR0_02_MAX_ROW_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_02_MAX_ROW_REG_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_02_START_MASK 0x00000001
-#define DDR0_02_START_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_02_START_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-#define DDR0_02_START_OFF 0x00000000
-#define DDR0_02_START_ON 0x00000001
-
-#define DDR0_03 0x03
-#define DDR0_03_BSTLEN_MASK 0x07000000
-#define DDR0_03_BSTLEN_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_03_BSTLEN_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_03_CASLAT_MASK 0x00070000
-#define DDR0_03_CASLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_03_CASLAT_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_03_CASLAT_LIN_MASK 0x00000F00
-#define DDR0_03_CASLAT_LIN_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_03_CASLAT_LIN_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_03_INITAREF_MASK 0x0000000F
-#define DDR0_03_INITAREF_ENCODE(n) ((((unsigned long)(n))&0xF)<<0)
-#define DDR0_03_INITAREF_DECODE(n) ((((unsigned long)(n))>>0)&0xF)
-
-#define DDR0_04 0x04
-#define DDR0_04_TRC_MASK 0x1F000000
-#define DDR0_04_TRC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_04_TRC_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_04_TRRD_MASK 0x00070000
-#define DDR0_04_TRRD_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_04_TRRD_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_04_TRTP_MASK 0x00000700
-#define DDR0_04_TRTP_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_04_TRTP_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
-
-#define DDR0_05 0x05
-#define DDR0_05_TMRD_MASK 0x1F000000
-#define DDR0_05_TMRD_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_05_TMRD_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_05_TEMRS_MASK 0x00070000
-#define DDR0_05_TEMRS_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_05_TEMRS_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_05_TRP_MASK 0x00000F00
-#define DDR0_05_TRP_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_05_TRP_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_05_TRAS_MIN_MASK 0x000000FF
-#define DDR0_05_TRAS_MIN_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_05_TRAS_MIN_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
-
-#define DDR0_06 0x06
-#define DDR0_06_WRITEINTERP_MASK 0x01000000
-#define DDR0_06_WRITEINTERP_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_06_WRITEINTERP_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_06_TWTR_MASK 0x00070000
-#define DDR0_06_TWTR_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_06_TWTR_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_06_TDLL_MASK 0x0000FF00
-#define DDR0_06_TDLL_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_06_TDLL_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
-#define DDR0_06_TRFC_MASK 0x0000007F
-#define DDR0_06_TRFC_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_06_TRFC_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_07 0x07
-#define DDR0_07_NO_CMD_INIT_MASK 0x01000000
-#define DDR0_07_NO_CMD_INIT_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_07_NO_CMD_INIT_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_07_TFAW_MASK 0x001F0000
-#define DDR0_07_TFAW_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
-#define DDR0_07_TFAW_DECODE(n) ((((unsigned long)(n))>>16)&0x1F)
-#define DDR0_07_AUTO_REFRESH_MODE_MASK 0x00000100
-#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
-#define DDR0_07_AREFRESH_MASK 0x00000001
-#define DDR0_07_AREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_07_AREFRESH_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_08 0x08
-#define DDR0_08_WRLAT_MASK 0x07000000
-#define DDR0_08_WRLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_08_WRLAT_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_08_TCPD_MASK 0x00FF0000
-#define DDR0_08_TCPD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_08_TCPD_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_08_DQS_N_EN_MASK 0x00000100
-#define DDR0_08_DQS_N_EN_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_08_DQS_N_EN_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
-#define DDR0_08_DDRII_SDRAM_MODE_MASK 0x00000001
-#define DDR0_08_DDRII_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_08_DDRII_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_09 0x09
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK 0x1F000000
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_09_RTT_0_MASK 0x00030000
-#define DDR0_09_RTT_0_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
-#define DDR0_09_RTT_0_DECODE(n) ((((unsigned long)(n))>>16)&0x3)
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK 0x00007F00
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_09_WR_DQS_SHIFT_MASK 0x0000007F
-#define DDR0_09_WR_DQS_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_09_WR_DQS_SHIFT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_10 0x0A
-#define DDR0_10_WRITE_MODEREG_MASK 0x00010000 /* Write only */
-#define DDR0_10_WRITE_MODEREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_10_WRITE_MODEREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_10_CS_MAP_MASK 0x00000300
-#define DDR0_10_CS_MAP_NO_MEM 0x00000000
-#define DDR0_10_CS_MAP_RANK0_INSTALLED 0x00000100
-#define DDR0_10_CS_MAP_RANK1_INSTALLED 0x00000200
-#define DDR0_10_CS_MAP_ENCODE(n) ((((unsigned long)(n))&0x3)<<8)
-#define DDR0_10_CS_MAP_DECODE(n) ((((unsigned long)(n))>>8)&0x3)
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK 0x0000001F
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0)
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F)
-
-#define DDR0_11 0x0B
-#define DDR0_11_SREFRESH_MASK 0x01000000
-#define DDR0_11_SREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_11_SREFRESH_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_11_TXSNR_MASK 0x00FF0000
-#define DDR0_11_TXSNR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_11_TXSNR_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_11_TXSR_MASK 0x0000FF00
-#define DDR0_11_TXSR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_11_TXSR_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
-
-#define DDR0_12 0x0C
-#define DDR0_12_TCKE_MASK 0x0000007
-#define DDR0_12_TCKE_ENCODE(n) ((((unsigned long)(n))&0x7)<<0)
-#define DDR0_12_TCKE_DECODE(n) ((((unsigned long)(n))>>0)&0x7)
-
-#define DDR0_13 0x0D
-
-#define DDR0_14 0x0E
-#define DDR0_14_DLL_BYPASS_MODE_MASK 0x01000000
-#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_14_DLL_BYPASS_MODE_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_14_REDUC_MASK 0x00010000
-#define DDR0_14_REDUC_64BITS 0x00000000
-#define DDR0_14_REDUC_32BITS 0x00010000
-#define DDR0_14_REDUC_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_14_REDUC_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_14_REG_DIMM_ENABLE_MASK 0x00000100
-#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_14_REG_DIMM_ENABLE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
-
-#define DDR0_15 0x0F
-
-#define DDR0_16 0x10
-
-#define DDR0_17 0x11
-#define DDR0_17_DLL_DQS_DELAY_0_MASK 0x7F000000
-#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */
-#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000
-#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000
-#define DDR0_17_DLLLOCKREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_17_DLLLOCKREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_17_DLL_LOCK_MASK 0x00007F00 /* Read only */
-#define DDR0_17_DLL_LOCK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_17_DLL_LOCK_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-
-#define DDR0_18 0x12
-#define DDR0_18_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
-#define DDR0_18_DLL_DQS_DELAY_4_MASK 0x7F000000
-#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_3_MASK 0x007F0000
-#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_2_MASK 0x00007F00
-#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_1_MASK 0x0000007F
-#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_19 0x13
-#define DDR0_19_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
-#define DDR0_19_DLL_DQS_DELAY_8_MASK 0x7F000000
-#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_7_MASK 0x007F0000
-#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_6_MASK 0x00007F00
-#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_5_MASK 0x0000007F
-#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_20 0x14
-#define DDR0_20_DLL_DQS_BYPASS_3_MASK 0x7F000000
-#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_2_MASK 0x007F0000
-#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_1_MASK 0x00007F00
-#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_0_MASK 0x0000007F
-#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_21 0x15
-#define DDR0_21_DLL_DQS_BYPASS_7_MASK 0x7F000000
-#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_6_MASK 0x007F0000
-#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_5_MASK 0x00007F00
-#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_4_MASK 0x0000007F
-#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_22 0x16
-/* ECC */
-#define DDR0_22_CTRL_RAW_MASK 0x03000000
-#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000 /* ECC not being used */
-#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000 /* ECC checking is on, but no attempts to correct*/
-#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000 /* No ECC RAM storage available */
-#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000 /* ECC checking and correcting on */
-#define DDR0_22_CTRL_RAW_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_22_CTRL_RAW_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
-
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_22_DQS_OUT_SHIFT_MASK 0x00007F00
-#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_22_DQS_OUT_SHIFT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_22_DLL_DQS_BYPASS_8_MASK 0x0000007F
-#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-
-#define DDR0_23 0x17
-#define DDR0_23_ODT_RD_MAP_CS0_MASK 0x03000000
-#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
-#define DDR0_23_ECC_C_SYND_MASK 0x00FF0000 /* Read only */
-#define DDR0_23_ECC_C_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_23_ECC_C_SYND_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_23_ECC_U_SYND_MASK 0x0000FF00 /* Read only */
-#define DDR0_23_ECC_U_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_23_ECC_U_SYND_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
-#define DDR0_23_FWC_MASK 0x00000001 /* Write only */
-#define DDR0_23_FWC_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_23_FWC_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_24 0x18
-#define DDR0_24_RTT_PAD_TERMINATION_MASK 0x03000000
-#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
-#define DDR0_24_ODT_WR_MAP_CS1_MASK 0x00030000
-#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
-#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>16)&0x3)
-#define DDR0_24_ODT_RD_MAP_CS1_MASK 0x00000300
-#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<8)
-#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>8)&0x3)
-#define DDR0_24_ODT_WR_MAP_CS0_MASK 0x00000003
-#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<0)
-#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>0)&0x3)
-
-#define DDR0_25 0x19
-#define DDR0_25_VERSION_MASK 0xFFFF0000 /* Read only */
-#define DDR0_25_VERSION_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16)
-#define DDR0_25_VERSION_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF)
-#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK 0x000003FF /* Read only */
-#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
-#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
-
-#define DDR0_26 0x1A
-#define DDR0_26_TRAS_MAX_MASK 0xFFFF0000
-#define DDR0_26_TRAS_MAX_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16)
-#define DDR0_26_TRAS_MAX_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF)
-#define DDR0_26_TREF_MASK 0x00003FFF
-#define DDR0_26_TREF_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0)
-#define DDR0_26_TREF_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF)
-
-#define DDR0_27 0x1B
-#define DDR0_27_EMRS_DATA_MASK 0x3FFF0000
-#define DDR0_27_EMRS_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16)
-#define DDR0_27_EMRS_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF)
-#define DDR0_27_TINIT_MASK 0x0000FFFF
-#define DDR0_27_TINIT_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0)
-#define DDR0_27_TINIT_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF)
-
-#define DDR0_28 0x1C
-#define DDR0_28_EMRS3_DATA_MASK 0x3FFF0000
-#define DDR0_28_EMRS3_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16)
-#define DDR0_28_EMRS3_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF)
-#define DDR0_28_EMRS2_DATA_MASK 0x00003FFF
-#define DDR0_28_EMRS2_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0)
-#define DDR0_28_EMRS2_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF)
-
-#define DDR0_29 0x1D
-
-#define DDR0_30 0x1E
-
-#define DDR0_31 0x1F
-#define DDR0_31_XOR_CHECK_BITS_MASK 0x0000FFFF
-#define DDR0_31_XOR_CHECK_BITS_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0)
-#define DDR0_31_XOR_CHECK_BITS_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF)
-
-#define DDR0_32 0x20
-#define DDR0_32_OUT_OF_RANGE_ADDR_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_33 0x21
-#define DDR0_33_OUT_OF_RANGE_ADDR_MASK 0x00000001 /* Read only */
-#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_34 0x22
-#define DDR0_34_ECC_U_ADDR_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_34_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_34_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_35 0x23
-#define DDR0_35_ECC_U_ADDR_MASK 0x00000001 /* Read only */
-#define DDR0_35_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_35_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_36 0x24
-#define DDR0_36_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_36_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_36_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_37 0x25
-#define DDR0_37_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_37_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_37_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_38 0x26
-#define DDR0_38_ECC_C_ADDR_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_38_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_38_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_39 0x27
-#define DDR0_39_ECC_C_ADDR_MASK 0x00000001 /* Read only */
-#define DDR0_39_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_39_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_40 0x28
-#define DDR0_40_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_40_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_40_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_41 0x29
-#define DDR0_41_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_41_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_41_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_42 0x2A
-#define DDR0_42_ADDR_PINS_MASK 0x07000000
-#define DDR0_42_ADDR_PINS_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_42_ADDR_PINS_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_42_CASLAT_LIN_GATE_MASK 0x0000000F
-#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n) ((((unsigned long)(n))&0xF)<<0)
-#define DDR0_42_CASLAT_LIN_GATE_DECODE(n) ((((unsigned long)(n))>>0)&0xF)
-
-#define DDR0_43 0x2B
-#define DDR0_43_TWR_MASK 0x07000000
-#define DDR0_43_TWR_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_43_TWR_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_43_APREBIT_MASK 0x000F0000
-#define DDR0_43_APREBIT_ENCODE(n) ((((unsigned long)(n))&0xF)<<16)
-#define DDR0_43_APREBIT_DECODE(n) ((((unsigned long)(n))>>16)&0xF)
-#define DDR0_43_COLUMN_SIZE_MASK 0x00000700
-#define DDR0_43_COLUMN_SIZE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_43_COLUMN_SIZE_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
-#define DDR0_43_EIGHT_BANK_MODE_MASK 0x00000001
-#define DDR0_43_EIGHT_BANK_MODE_8_BANKS 0x00000001
-#define DDR0_43_EIGHT_BANK_MODE_4_BANKS 0x00000000
-#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_43_EIGHT_BANK_MODE_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_44 0x2C
-#define DDR0_44_TRCD_MASK 0x000000FF
-#define DDR0_44_TRCD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_44_TRCD_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
-
-#endif /* _SPD_SDRAM_DENALI_H_ */
#include <libfdt.h>
#include <fdt_support.h>
#include <ppc440.h>
+#include <asm/gpio.h>
#include <asm/processor.h>
#include <asm/io.h>
+#include <asm/ppc4xx-intvec.h>
DECLARE_GLOBAL_DATA_PTR;
mtdcr(ebccfga, xbcfg);
mtdcr(ebccfgd, 0xb8400000);
- /*--------------------------------------------------------------------
- * Setup the GPIO pins
- *-------------------------------------------------------------------*/
- /* test-only: take GPIO init from pcs440ep ???? in config file */
- out_be32((u32 *) GPIO0_OR, 0x00000000);
- out_be32((u32 *) GPIO0_TCR, 0x0000000f);
- out_be32((u32 *) GPIO0_OSRL, 0x50015400);
- out_be32((u32 *) GPIO0_OSRH, 0x550050aa);
- out_be32((u32 *) GPIO0_TSRL, 0x50015400);
- out_be32((u32 *) GPIO0_TSRH, 0x55005000);
- out_be32((u32 *) GPIO0_ISR1L, 0x50000000);
- out_be32((u32 *) GPIO0_ISR1H, 0x00000000);
- out_be32((u32 *) GPIO0_ISR2L, 0x00000000);
- out_be32((u32 *) GPIO0_ISR2H, 0x00000100);
- out_be32((u32 *) GPIO0_ISR3L, 0x00000000);
- out_be32((u32 *) GPIO0_ISR3H, 0x00000000);
-
- out_be32((u32 *) GPIO1_OR, 0x00000000);
- out_be32((u32 *) GPIO1_TCR, 0xc2000000);
- out_be32((u32 *) GPIO1_OSRL, 0x5c280000);
- out_be32((u32 *) GPIO1_OSRH, 0x00000000);
- out_be32((u32 *) GPIO1_TSRL, 0x0c000000);
- out_be32((u32 *) GPIO1_TSRH, 0x00000000);
- out_be32((u32 *) GPIO1_ISR1L, 0x00005550);
- out_be32((u32 *) GPIO1_ISR1H, 0x00000000);
- out_be32((u32 *) GPIO1_ISR2L, 0x00050000);
- out_be32((u32 *) GPIO1_ISR2H, 0x00000000);
- out_be32((u32 *) GPIO1_ISR3L, 0x01400000);
- out_be32((u32 *) GPIO1_ISR3H, 0x00000000);
-
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
}
#endif
+#if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP)
+/*
+ * Assign interrupts to PCI devices.
+ */
+void sequoia_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIR2);
+}
+#endif
+
/*************************************************************************
* pci_pre_init
*
addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
mtdcr(plb1_acr, addr);
+#ifdef CONFIG_PCI_PNP
+ hose->fixup_irq = sequoia_pci_fixup_irq;
+#endif
return 1;
}
#endif /* defined(CONFIG_PCI) */
--- /dev/null
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := apollon.o mem.o sys_info.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
--- /dev/null
+/*
+ * (C) Copyright 2005-2007
+ * Samsung Electronics.
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Derived from omap2420
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+#include <asm/arch/mem.h>
+#include <asm/mach-types.h>
+
+void wait_for_command_complete(unsigned int wd_base);
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define write_config_reg(reg, value) \
+do { \
+ writeb(value, reg); \
+} while (0)
+
+#define mask_config_reg(reg, mask) \
+do { \
+ char value = readb(reg) & ~(mask); \
+ writeb(value, reg); \
+} while (0)
+
+/*******************************************************
+ * Routine: delay
+ * Description: spinning delay to use before udelay works
+ ******************************************************/
+static inline void delay(unsigned long loops)
+{
+ __asm__("1:\n" "subs %0, %1, #1\n"
+ "bne 1b":"=r" (loops):"0"(loops));
+}
+
+/*****************************************
+ * Routine: board_init
+ * Description: Early hardware init.
+ *****************************************/
+int board_init(void)
+{
+ gpmc_init(); /* in SRAM or SDRM, finish GPMC */
+
+ gd->bd->bi_arch_number = 919;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0 + 0x100);
+
+ return 0;
+}
+
+/**********************************************************
+ * Routine: s_init
+ * Description: Does early system init of muxing and clocks.
+ * - Called path is with sram stack.
+ **********************************************************/
+void s_init(void)
+{
+ watchdog_init();
+ set_muxconf_regs();
+ delay(100);
+
+ peripheral_enable();
+ icache_enable();
+}
+
+/*******************************************************
+ * Routine: misc_init_r
+ * Description: Init ethernet (done here so udelay works)
+ ********************************************************/
+int misc_init_r(void)
+{
+ ether_init(); /* better done here so timers are init'ed */
+ return (0);
+}
+
+/****************************************
+ * Routine: watchdog_init
+ * Description: Shut down watch dogs
+ *****************************************/
+void watchdog_init(void)
+{
+ /* There are 4 watch dogs. 1 secure, and 3 general purpose.
+ * The ROM takes care of the secure one. Of the 3 GP ones,
+ * 1 can reset us directly, the other 2 only generate MPU interrupts.
+ */
+ __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR);
+ wait_for_command_complete(WD2_BASE);
+ __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR);
+
+#define MPU_WD_CLOCKED 1
+#if MPU_WD_CLOCKED
+ /* value 0x10 stick on aptix, BIT4 polarity seems oppsite */
+ __raw_writel(WD_UNLOCK1, WD3_BASE + WSPR);
+ wait_for_command_complete(WD3_BASE);
+ __raw_writel(WD_UNLOCK2, WD3_BASE + WSPR);
+
+ __raw_writel(WD_UNLOCK1, WD4_BASE + WSPR);
+ wait_for_command_complete(WD4_BASE);
+ __raw_writel(WD_UNLOCK2, WD4_BASE + WSPR);
+#endif
+}
+
+/******************************************************
+ * Routine: wait_for_command_complete
+ * Description: Wait for posting to finish on watchdog
+ ******************************************************/
+void wait_for_command_complete(unsigned int wd_base)
+{
+ int pending = 1;
+ do {
+ pending = __raw_readl(wd_base + WWPS);
+ } while (pending);
+}
+
+/*******************************************************************
+ * Routine:ether_init
+ * Description: take the Ethernet controller out of reset and wait
+ * for the EEPROM load to complete.
+ ******************************************************************/
+void ether_init(void)
+{
+#ifdef CONFIG_DRIVER_LAN91C96
+ int cnt = 20;
+
+ __raw_writeb(0x03, OMAP2420_CTRL_BASE + 0x0f2); /*protect->gpio74 */
+
+ __raw_writew(0x0, LAN_RESET_REGISTER);
+ do {
+ __raw_writew(0x1, LAN_RESET_REGISTER);
+ udelay(100);
+ if (cnt == 0) {
+ printf("1. eth reset err\n");
+ goto eth_reset_err_out;
+ }
+ --cnt;
+ } while (__raw_readw(LAN_RESET_REGISTER) != 0x1);
+
+ cnt = 20;
+
+ do {
+ __raw_writew(0x0, LAN_RESET_REGISTER);
+ udelay(100);
+ if (cnt == 0) {
+ printf("2. eth reset err\n");
+ goto eth_reset_err_out;
+ }
+ --cnt;
+ } while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
+ udelay(1000);
+
+ mask_config_reg(ETH_CONTROL_REG, 0x01);
+ udelay(1000);
+
+eth_reset_err_out:
+ return;
+#endif
+}
+
+/**********************************************
+ * Routine: dram_init
+ * Description: sets uboots idea of sdram size
+ **********************************************/
+int dram_init(void)
+{
+ unsigned int size0 = 0, size1 = 0;
+ u32 mtype, btype, rev = 0, cpu = 0;
+#define NOT_EARLY 0
+
+ btype = get_board_type();
+ mtype = get_mem_type();
+ rev = get_cpu_rev();
+ cpu = get_cpu_type();
+
+ display_board_info(btype);
+
+ if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
+ /* init other chip select */
+ do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);
+ }
+
+ size0 = get_sdr_cs_size(SDRC_CS0_OSET);
+ size1 = get_sdr_cs_size(SDRC_CS1_OSET);
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = size0;
+#if CONFIG_NR_DRAM_BANKS > 1
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + size0;
+ gd->bd->bi_dram[1].size = size1;
+#endif
+
+ return 0;
+}
+
+/**********************************************************
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers
+ * specific to the hardware
+ *********************************************************/
+void set_muxconf_regs(void)
+{
+ muxSetupSDRC();
+ muxSetupGPMC();
+ muxSetupUsb0(); /* USB Device */
+ muxSetupUsbHost(); /* USB Host */
+ muxSetupUART1();
+ muxSetupLCD();
+ muxSetupMMCSD();
+ muxSetupTouchScreen();
+}
+
+/*****************************************************************
+ * Routine: peripheral_enable
+ * Description: Enable the clks & power for perifs (GPT2, UART1,...)
+ ******************************************************************/
+void peripheral_enable(void)
+{
+ unsigned int v, if_clks = 0, func_clks = 0;
+
+ /* Enable GP2 timer. */
+ if_clks |= BIT4 | BIT3;
+ func_clks |= BIT4 | BIT3;
+ /* Sys_clk input OMAP2420_GPT2 */
+ v = __raw_readl(CM_CLKSEL2_CORE) | 0x4 | 0x2;
+ __raw_writel(v, CM_CLKSEL2_CORE);
+ __raw_writel(0x1, CM_CLKSEL_WKUP);
+
+#ifdef CFG_NS16550
+ /* Enable UART1 clock */
+ func_clks |= BIT21;
+ if_clks |= BIT21;
+#endif
+ /* Interface clocks on */
+ v = __raw_readl(CM_ICLKEN1_CORE) | if_clks;
+ __raw_writel(v, CM_ICLKEN1_CORE);
+ /* Functional Clocks on */
+ v = __raw_readl(CM_FCLKEN1_CORE) | func_clks;
+ __raw_writel(v, CM_FCLKEN1_CORE);
+ delay(1000);
+
+#ifndef KERNEL_UPDATED
+ {
+#define V1 0xffffffff
+#define V2 0x00000007
+
+ __raw_writel(V1, CM_FCLKEN1_CORE);
+ __raw_writel(V2, CM_FCLKEN2_CORE);
+ __raw_writel(V1, CM_ICLKEN1_CORE);
+ __raw_writel(V1, CM_ICLKEN2_CORE);
+ }
+#endif
+}
+
+/****************************************
+ * Routine: muxSetupUsb0 (ostboot)
+ * Description: Setup usb muxing
+ *****************************************/
+void muxSetupUsb0(void)
+{
+ mask_config_reg(CONTROL_PADCONF_USB0_PUEN, 0x1f);
+ mask_config_reg(CONTROL_PADCONF_USB0_VP, 0x1f);
+ mask_config_reg(CONTROL_PADCONF_USB0_VM, 0x1f);
+ mask_config_reg(CONTROL_PADCONF_USB0_RCV, 0x1f);
+ mask_config_reg(CONTROL_PADCONF_USB0_TXEN, 0x1f);
+ mask_config_reg(CONTROL_PADCONF_USB0_SE0, 0x1f);
+ mask_config_reg(CONTROL_PADCONF_USB0_DAT, 0x1f);
+}
+
+/****************************************
+ * Routine: muxSetupUSBHost (ostboot)
+ * Description: Setup USB Host muxing
+ *****************************************/
+void muxSetupUsbHost(void)
+{
+ /* V19 */
+ write_config_reg(CONTROL_PADCONF_USB1_RCV, 1);
+ /* W20 */
+ write_config_reg(CONTROL_PADCONF_USB1_TXEN, 1);
+ /* N14 */
+ write_config_reg(CONTROL_PADCONF_GPIO69, 3);
+ /* P15 */
+ write_config_reg(CONTROL_PADCONF_GPIO70, 3);
+ /* L18 */
+ write_config_reg(CONTROL_PADCONF_GPIO102, 3);
+ /* L19 */
+ write_config_reg(CONTROL_PADCONF_GPIO103, 3);
+ /* K15 */
+ write_config_reg(CONTROL_PADCONF_GPIO104, 3);
+ /* K14 */
+ write_config_reg(CONTROL_PADCONF_GPIO105, 3);
+}
+
+/****************************************
+ * Routine: muxSetupUART1 (ostboot)
+ * Description: Set up uart1 muxing
+ *****************************************/
+void muxSetupUART1(void)
+{
+ /* UART1_CTS pin configuration, PIN = D21, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_UART1_CTS, 0);
+ /* UART1_RTS pin configuration, PIN = H21, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_UART1_RTS, 0);
+ /* UART1_TX pin configuration, PIN = L20, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_UART1_TX, 0);
+ /* UART1_RX pin configuration, PIN = T21, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_UART1_RX, 0);
+}
+
+/****************************************
+ * Routine: muxSetupLCD (ostboot)
+ * Description: Setup lcd muxing
+ *****************************************/
+void muxSetupLCD(void)
+{
+ /* LCD_D0 pin configuration, PIN = Y7, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D0, 0);
+ /* LCD_D1 pin configuration, PIN = P10 , Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D1, 0);
+ /* LCD_D2 pin configuration, PIN = V8, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D2, 0);
+ /* LCD_D3 pin configuration, PIN = Y8, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D3, 0);
+ /* LCD_D4 pin configuration, PIN = W8, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D4, 0);
+ /* LCD_D5 pin configuration, PIN = R10, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D5, 0);
+ /* LCD_D6 pin configuration, PIN = Y9, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D6, 0);
+ /* LCD_D7 pin configuration, PIN = V9, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D7, 0);
+ /* LCD_D8 pin configuration, PIN = W9, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D8, 0);
+ /* LCD_D9 pin configuration, PIN = P11, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D9, 0);
+ /* LCD_D10 pin configuration, PIN = V10, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D10, 0);
+ /* LCD_D11 pin configuration, PIN = Y10, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D11, 0);
+ /* LCD_D12 pin configuration, PIN = W10, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D12, 0);
+ /* LCD_D13 pin configuration, PIN = R11, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D13, 0);
+ /* LCD_D14 pin configuration, PIN = V11, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D14, 0);
+ /* LCD_D15 pin configuration, PIN = W11, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D15, 0);
+ /* LCD_D16 pin configuration, PIN = P12, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D16, 0);
+ /* LCD_D17 pin configuration, PIN = R12, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_D17, 0);
+ /* LCD_PCLK pin configuration, PIN = W6, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_PCLK, 0);
+ /* LCD_VSYNC pin configuration, PIN = V7, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_VSYNC, 0);
+ /* LCD_HSYNC pin configuration, PIN = Y6, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_HSYNC, 0);
+ /* LCD_ACBIAS pin configuration, PIN = W7, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_DSS_ACBIAS, 0);
+}
+
+/****************************************
+ * Routine: muxSetupMMCSD (ostboot)
+ * Description: set up MMC muxing
+ *****************************************/
+void muxSetupMMCSD(void)
+{
+ /* SDMMC_CLKI pin configuration, PIN = H15, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_MMC_CLKI, 0);
+ /* SDMMC_CLKO pin configuration, PIN = G19, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_MMC_CLKO, 0);
+ /* SDMMC_CMD pin configuration, PIN = H18, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_MMC_CMD, 0);
+ /* SDMMC_DAT0 pin configuration, PIN = F20, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_MMC_DAT0, 0);
+ /* SDMMC_DAT1 pin configuration, PIN = H14, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_MMC_DAT1, 0);
+ /* SDMMC_DAT2 pin configuration, PIN = E19, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_MMC_DAT2, 0);
+ /* SDMMC_DAT3 pin configuration, PIN = D19, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_MMC_DAT3, 0);
+ /* SDMMC_DDIR0 pin configuration, PIN = F19, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR0, 0);
+ /* SDMMC_DDIR1 pin configuration, PIN = E20, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR1, 0);
+ /* SDMMC_DDIR2 pin configuration, PIN = F18, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR2, 0);
+ /* SDMMC_DDIR3 pin configuration, PIN = E18, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR3, 0);
+ /* SDMMC_CDIR pin configuration, PIN = G18, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_MMC_CMD_DIR, 0);
+}
+
+/******************************************
+ * Routine: muxSetupTouchScreen (ostboot)
+ * Description: Set up touch screen muxing
+ *******************************************/
+void muxSetupTouchScreen(void)
+{
+ /* SPI1_CLK pin configuration, PIN = U18, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_SPI1_CLK, 0);
+ /* SPI1_MOSI pin configuration, PIN = V20, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_SPI1_SIMO, 0);
+ /* SPI1_MISO pin configuration, PIN = T18, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_SPI1_SOMI, 0);
+ /* SPI1_nCS0 pin configuration, PIN = U19, Mode = 0, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_SPI1_NCS0, 0);
+#define CONTROL_PADCONF_GPIO85 CONTROL_PADCONF_SPI1_NCS1
+ /* PEN_IRQ pin configuration, PIN = N15, Mode = 3, PUPD=Disabled */
+ write_config_reg(CONTROL_PADCONF_GPIO85, 3);
+}
+
+/***************************************************************
+ * Routine: muxSetupGPMC (ostboot)
+ * Description: Configures balls which cam up in protected mode
+ ***************************************************************/
+void muxSetupGPMC(void)
+{
+ /* gpmc_io_dir, MCR */
+ writel(0x4800008C, 0x19000000);
+
+ /* NOR FLASH CS0 */
+ /* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode 0; Byte-3 */
+ write_config_reg(CONTROL_PADCONF_GPMC_D2_BYTE3, 0);
+ /* MPDB(Multi Port Debug Port) CS1 */
+ /* signal - gpmc_ncs1; pin - N8; offset - 0x008D; mode 0; Byte-1 */
+ write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE1, 0);
+ /* signal - Gpmc_ncs2; pin - E2; offset - 0x008E; mode 0; Byte-2 */
+ write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE2, 0);
+ /* signal - Gpmc_ncs3; pin - N2; offset - 0x008F; mode 0; Byte-3 */
+ write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE3, 0);
+ /* signal - Gpmc_ncs4; pin - ??; offset - 0x0090; mode 0; Byte-4 */
+ write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE4, 0);
+ /* signal - Gpmc_ncs5; pin - ??; offset - 0x0091; mode 0; Byte-5 */
+ write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE5, 0);
+ /* signal - Gpmc_ncs6; pin - ??; offset - 0x0092; mode 0; Byte-6 */
+ write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE6, 0);
+ /* signal - Gpmc_ncs7; pin - ??; offset - 0x0093; mode 0; Byte-7 */
+ write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE7, 0);
+}
+
+/****************************************************************
+ * Routine: muxSetupSDRC (ostboot)
+ * Description: Configures balls which come up in protected mode
+ ****************************************************************/
+void muxSetupSDRC(void)
+{
+ /* It's set by IPL */
+}
--- /dev/null
+#
+# (C) Copyright 2005-2007
+# Samsung Electronics
+#
+# Samsung December board with OMAP2420 (ARM1136) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# December has 1 bank of 128MB mDDR-SDRAM on CS0
+# December has 1 bank of 00MB mDDR-SDRAM on CS1
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1) ES2 will be configurable
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+# For use with external or internal boots.
+TEXT_BASE = 0x80e80000
+
+# Used with full SRAM boot.
+# This is either with a GP system or a signed boot image.
+# easiest, and safest way to go if you can.
+#TEXT_BASE = 0x40270000
+
+# Handy to get symbols to debug ROM version.
+#TEXT_BASE = 0x0
+#TEXT_BASE = 0x08000000
--- /dev/null
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2005-2007
+ * Samsung Electronics,
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/omap2420.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/clocks.h>
+#include "mem.h"
+
+#define APOLLON_CS0_BASE 0x00000000
+
+#ifdef PRCM_CONFIG_I
+#define SDRC_ACTIM_CTRLA_0_VAL 0x7BA35907
+#define SDRC_ACTIM_CTRLB_0_VAL 0x00000013
+#define SDRC_RFR_CTRL_0_VAL 0x00044C01
+#elif defined(PRCM_CONFIG_II)
+#define SDRC_ACTIM_CTRLA_0_VAL 0x4A59B485
+#define SDRC_ACTIM_CTRLB_0_VAL 0x0000000C
+#define SDRC_RFR_CTRL_0_VAL 0x00030001
+#endif
+
+#define SDRAM_BASE_ADDRESS 0x80008000
+
+_TEXT_BASE:
+ .word TEXT_BASE /* sdram load addr from config.mk */
+
+.globl lowlevel_init
+lowlevel_init:
+
+#ifdef CFG_NOR_BOOT
+ /* Check running in SDRAM */
+ mov r0, pc, lsr #28
+ cmp r0, #8
+ beq prcm_setup
+
+flash_setup:
+ /* In Flash */
+ ldr r0, =WD2_BASE
+ ldr r1, =WD_UNLOCK1
+ str r1, [r0, #WSPR]
+
+ ldr r1, =WD_UNLOCK2
+ str r1, [r0, #WSPR]
+
+ /* Pin muxing for SDRC */
+ mov r1, #0x00
+ ldr r0, =0x480000A1 /* ball C12, mode 0 */
+ strb r1, [r0]
+
+ ldr r0, =0x48000032 /* ball D11, mode 0 */
+ strb r1, [r0]
+
+ ldr r0, =0x480000A3 /* ball B13, mode 0 */
+ strb r1, [r0]
+
+ /* SDRC setting */
+ ldr r0, =OMAP2420_SDRC_BASE
+ ldr r1, =0x00000010
+ str r1, [r0, #0x10]
+
+ ldr r1, =0x00000100
+ str r1, [r0, #0x44]
+
+ /* SDRC CS0 configuration */
+ ldr r1, =0x00d04011
+ str r1, [r0, #0x80]
+
+ ldr r1, =SDRC_ACTIM_CTRLA_0_VAL
+ str r1, [r0, #0x9C]
+
+ ldr r1, =SDRC_ACTIM_CTRLB_0_VAL
+ str r1, [r0, #0xA0]
+
+ ldr r1, =SDRC_RFR_CTRL_0_VAL
+ str r1, [r0, #0xA4]
+
+ ldr r1, =0x00000041
+ str r1, [r0, #0x70]
+
+ /* Manual command sequence */
+ ldr r1, =0x00000007
+ str r1, [r0, #0xA8]
+
+ ldr r1, =0x00000000
+ str r1, [r0, #0xA8]
+
+ ldr r1, =0x00000001
+ str r1, [r0, #0xA8]
+
+ ldr r1, =0x00000002
+ str r1, [r0, #0xA8]
+ str r1, [r0, #0xA8]
+
+ /*
+ * CS0 SDRC Mode register
+ * Burst length = 4 - DDR memory
+ * Serial mode
+ * CAS latency = 3
+ */
+ ldr r1, =0x00000032
+ str r1, [r0, #0x84]
+
+ /* Note: You MUST set EMR values */
+ /* EMR1 & EMR2 */
+ ldr r1, =0x00000000
+ str r1, [r0, #0x88]
+ str r1, [r0, #0x8C]
+
+#ifdef OLD_SDRC_DLLA_CTRL
+ /* SDRC_DLLA_CTRL */
+ ldr r1, =0x00007306
+ str r1, [r0, #0x60]
+
+ ldr r1, =0x00007303
+ str r1, [r0, #0x60]
+#else
+ /* SDRC_DLLA_CTRL */
+ ldr r1, =0x00000506
+ str r1, [r0, #0x60]
+
+ ldr r1, =0x00000503
+ str r1, [r0, #0x60]
+#endif
+
+#ifdef __BROKEN_FEATURE__
+ /* SDRC_DLLB_CTRL */
+ ldr r1, =0x00000506
+ str r1, [r0, #0x68]
+
+ ldr r1, =0x00000503
+ str r1, [r0, #0x68]
+#endif
+
+ /* little delay after init */
+ mov r2, #0x1800
+1:
+ subs r2, r2, #0x1
+ bne 1b
+
+ /* Setup base address */
+ ldr r0, =0x00000000 /* NOR address */
+ ldr r1, =SDRAM_BASE_ADDRESS /* SDRAM address */
+ ldr r2, =0x20000 /* Size: 128KB */
+
+copy_loop:
+ ldmia r0!, {r3-r10}
+ stmia r1!, {r3-r10}
+ cmp r0, r2
+ ble copy_loop
+
+ ldr r1, =SDRAM_BASE_ADDRESS
+ mov lr, pc
+ mov pc, r1
+#endif
+
+prcm_setup:
+ ldr r0, =OMAP2420_CM_BASE
+ ldr r1, [r0, #0x544] /* CLKSEL2_PLL */
+ bic r1, r1, #0x03
+ orr r1, r1, #0x02
+ str r1, [r0, #0x544]
+
+ ldr r1, [r0, #0x500]
+ bic r1, r1, #0x03
+ orr r1, r1, #0x01
+ str r1, [r0, #0x500]
+
+ ldr r1, [r0, #0x140]
+ bic r1, r1, #0x1f
+ orr r1, r1, #0x02
+ str r1, [r0, #0x140]
+
+#ifdef PRCM_CONFIG_I
+ ldr r1, =0x000003C3
+#else
+ ldr r1, =0x00000343
+#endif
+ str r1, [r0, #0x840]
+
+ ldr r1, =0x00000002
+ str r1, [r0, #0x340]
+
+ ldr r1, =CM_CLKSEL1_CORE
+#ifdef PRCM_CONFIG_I
+ ldr r2, =0x08300C44
+#else
+ ldr r2, =0x04600C26
+#endif
+ str r2, [r1]
+
+ ldr r0, =OMAP2420_CM_BASE
+ ldr r1, [r0, #0x084]
+ and r1, r1, #0x01
+ cmp r1, #0x01
+ bne clkvalid
+
+ b .
+
+clkvalid:
+ mov r1, #0x01
+ str r1, [r0, #0x080]
+
+waitvalid:
+ ldr r1, [r0, #0x084]
+ and r1, r1, #0x01
+ cmp r1, #0x00
+ bne waitvalid
+
+ ldr r0, =CM_CLKSEL1_PLL
+#ifdef PRCM_CONFIG_I
+ ldr r1, =0x01837100
+#else
+ ldr r1, =0x01832100
+#endif
+ str r1, [r0]
+
+ ldr r0, =PRCM_CLKCFG_CTRL
+ mov r1, #0x01
+ str r1, [r0]
+ mov r6, #0x50
+loop1:
+ subs r6, r6, #0x01
+ cmp r6, #0x01
+ bne loop1
+
+ ldr r0, =CM_CLKEN_PLL
+ mov r1, #0x0f
+ str r1, [r0]
+
+ mov r6, #0x100
+loop2:
+ subs r6, r6, #0x01
+ cmp r6, #0x01
+ bne loop2
+
+ ldr r0, =0x48008200
+ ldr r1, =0xbfffffff
+ str r1, [r0]
+
+ ldr r0, =0x48008210
+ ldr r1, =0xfffffff9
+ str r1, [r0]
+
+ ldr r0, =0x4806a004
+ ldr r1, =0x00
+ strb r1, [r0]
+
+ ldr r0, =0x4806a020
+ ldr r1, =0x07
+ strb r1, [r0]
+
+ ldr r0, =0x4806a00c
+ ldr r1, =0x83
+ strb r1, [r0]
+
+ ldr r0, =0x4806a000
+ ldr r1, =0x1a
+ strb r1, [r0]
+
+ ldr r0, =0x4806a004
+ ldr r1, =0x00
+ strb r1, [r0]
+
+ ldr r0, =0x4806a00c
+ ldr r1, =0x03
+ strb r1, [r0]
+
+ ldr r0, =0x4806a010
+ ldr r1, =0x03
+ strb r1, [r0]
+
+ ldr r0, =0x4806a008
+ ldr r1, =0x04
+ strb r1, [r0]
+
+ ldr r0, =0x4806a020
+ ldr r1, =0x00
+ strb r1, [r0]
+
+#if 0
+ ldr r0, =0x4806a000
+ mov r1, #'u'
+ strb r1, [r0]
+#endif
+
+#if 0
+ /* LED0 OFF */
+ ldr r3, =0x480000E5
+ mov r4, #0x0b
+ strb r4, [r3]
+#endif
+
+ ldr sp, SRAM_STACK
+ str ip, [sp] /* stash old link register */
+ mov ip, lr /* save link reg across call */
+ bl s_init /* go setup pll,mux,memory */
+ ldr ip, [sp] /* restore save ip */
+ mov lr, ip /* restore link reg */
+
+ /* map interrupt controller */
+ ldr r0, VAL_INTH_SETUP
+ mcr p15, 0, r0, c15, c2, 4
+
+ /* back to arch calling code */
+ mov pc, lr
+
+ /* the literal pools origin */
+ .ltorg
+
+VAL_INTH_SETUP:
+ .word PERIFERAL_PORT_BASE
+SRAM_STACK:
+ .word LOW_LEVEL_SRAM_STACK
--- /dev/null
+/*
+ * (C) Copyright 2005-2007
+ * Samsung Electronics,
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Derived from omap2420
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+
+#include "mem.h"
+
+/************************************************************
+ * sdelay() - simple spin loop. Will be constant time as
+ * its generally used in 12MHz bypass conditions only. This
+ * is necessary until timers are accessible.
+ *
+ * not inline to increase chances its in cache when called
+ *************************************************************/
+void sdelay(unsigned long loops)
+{
+ __asm__("1:\n" "subs %0, %1, #1\n"
+ "bne 1b":"=r" (loops):"0"(loops));
+}
+
+/********************************************************************
+ * prcm_init() - inits clocks for PRCM as defined in clocks.h
+ * (config II default).
+ * -- called from SRAM, or Flash (using temp SRAM stack).
+ ********************************************************************/
+void prcm_init(void) { }
+
+/**************************************************************************
+ * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow
+ * command line mem=xyz use all memory with out discontigious support
+ * compiled in. Could do it at the ATAG, but there really is two banks...
+ * Called as part of 2nd phase DDR init.
+ **************************************************************************/
+void make_cs1_contiguous(void)
+{
+ u32 size, a_add_low, a_add_high;
+
+ size = get_sdr_cs_size(SDRC_CS0_OSET);
+ size /= SZ_32M; /* find size to offset CS1 */
+ a_add_high = (size & 3) << 8; /* set up low field */
+ a_add_low = (size & 0x3C) >> 2; /* set up high field */
+ __raw_writel((a_add_high | a_add_low), SDRC_CS_CFG);
+
+}
+
+/********************************************************
+ * mem_ok() - test used to see if timings are correct
+ * for a part. Helps in gussing which part
+ * we are currently using.
+ *******************************************************/
+u32 mem_ok(void)
+{
+ u32 val1, val2;
+ u32 pattern = 0x12345678;
+
+ /* clear pos A */
+ __raw_writel(0x0, OMAP2420_SDRC_CS0 + 0x400);
+ /* pattern to pos B */
+ __raw_writel(pattern, OMAP2420_SDRC_CS0);
+ /* remove pattern off the bus */
+ __raw_writel(0x0, OMAP2420_SDRC_CS0 + 4);
+ /* get pos A value */
+ val1 = __raw_readl(OMAP2420_SDRC_CS0 + 0x400);
+ val2 = __raw_readl(OMAP2420_SDRC_CS0); /* get val2 */
+
+ /* see if pos A value changed */
+ if ((val1 != 0) || (val2 != pattern))
+ return (0);
+ else
+ return (1);
+}
+
+/********************************************************
+ * sdrc_init() - init the sdrc chip selects CS0 and CS1
+ * - early init routines, called from flash or
+ * SRAM.
+ *******************************************************/
+void sdrc_init(void)
+{
+#define EARLY_INIT 1
+ /* only init up first bank here */
+ do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT);
+}
+
+/*************************************************************************
+ * do_sdrc_init(): initialize the SDRAM for use.
+ * -called from low level code with stack only.
+ * -code sets up SDRAM timing and muxing for 2422 or 2420.
+ * -optimal settings can be placed here, or redone after i2c
+ * inspection of board info
+ *
+ * This is a bit ugly, but should handle all memory moduels
+ * used with the APOLLON. The first time though this code from s_init()
+ * we configure the first chip select. Later on we come back and
+ * will configure the 2nd chip select if it exists.
+ *
+ **************************************************************************/
+void do_sdrc_init(u32 offset, u32 early)
+{
+}
+
+/*****************************************************
+ * gpmc_init(): init gpmc bus
+ * Init GPMC for x16, MuxMode (SDRAM in x32).
+ * This code can only be executed from SRAM or SDRAM.
+ *****************************************************/
+void gpmc_init(void)
+{
+ u32 mux = 0, mtype, mwidth, rev, tval;
+
+ rev = get_cpu_rev();
+ if (rev == CPU_2420_2422_ES1)
+ tval = 1;
+ else
+ tval = 0; /* disable bit switched meaning */
+
+ /* global settings */
+ __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */
+ __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */
+ __raw_writel(tval, GPMC_TIMEOUT_CONTROL); /* timeout disable */
+#ifdef CFG_NAND_BOOT
+ /* set nWP, disable limited addr */
+ __raw_writel(0x001, GPMC_CONFIG);
+#else
+ /* set nWP, disable limited addr */
+ __raw_writel(0x111, GPMC_CONFIG);
+#endif
+
+ /* discover bus connection from sysboot */
+ if (is_gpmc_muxed() == GPMC_MUXED)
+ mux = BIT9;
+ mtype = get_gpmc0_type();
+ mwidth = get_gpmc0_width();
+
+ /* setup cs0 */
+ __raw_writel(0x0, GPMC_CONFIG7_0); /* disable current map */
+ sdelay(1000);
+
+#ifdef CFG_NOR_BOOT
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG1_3, GPMC_CONFIG1_0);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG2_3, GPMC_CONFIG2_0);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG3_3, GPMC_CONFIG3_0);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG4_3, GPMC_CONFIG4_0);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG5_3, GPMC_CONFIG5_0);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG6_3, GPMC_CONFIG6_0);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG7_3, GPMC_CONFIG7_0);
+#else
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG1_0 | mux | mtype | mwidth,
+ GPMC_CONFIG1_0);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_0);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);
+#endif
+ sdelay(2000);
+
+ /* setup cs1 */
+ __raw_writel(0, GPMC_CONFIG7_1); /* disable any mapping */
+ sdelay(1000);
+
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG1_1, GPMC_CONFIG1_1);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG2_1, GPMC_CONFIG2_1);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG3_1, GPMC_CONFIG3_1);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG4_1, GPMC_CONFIG4_1);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG5_1, GPMC_CONFIG5_1);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG6_1, GPMC_CONFIG6_1);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1);
+ sdelay(2000);
+
+ /* setup cs2 */
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG1_0 | mux | mtype | mwidth,
+ GPMC_CONFIG1_2);
+ /* It's same as cs 0 */
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_2);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_2);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_2);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_2);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_2);
+#ifdef CFG_NOR_BOOT
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_2);
+#else
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG7_2, GPMC_CONFIG7_2);
+#endif
+
+#ifndef CFG_NOR_BOOT
+ /* setup cs3 */
+ __raw_writel(0, GPMC_CONFIG7_3); /* disable any mapping */
+ sdelay(1000);
+
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG1_3, GPMC_CONFIG1_3);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG2_3, GPMC_CONFIG2_3);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG3_3, GPMC_CONFIG3_3);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG4_3, GPMC_CONFIG4_3);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG5_3, GPMC_CONFIG5_3);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG6_3, GPMC_CONFIG6_3);
+ __raw_writel(APOLLON_24XX_GPMC_CONFIG7_3, GPMC_CONFIG7_3);
+#endif
+
+#ifndef ASYNC_NOR
+ __raw_writew(0xaa, (APOLLON_CS3_BASE + 0xaaa));
+ __raw_writew(0x55, (APOLLON_CS3_BASE + 0x554));
+ __raw_writew(0xc0, (APOLLON_CS3_BASE | SYNC_NOR_VALUE));
+#endif
+ sdelay(2000);
+}
--- /dev/null
+/*
+ * (C) Copyright 2005-2007
+ * Samsung Electronics,
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _APOLLON_OMAP24XX_MEM_H_
+#define _APOLLON_OMAP24XX_MEM_H_
+
+/* Slower full frequency range default timings for x32 operation*/
+#define APOLLON_2420_SDRC_SHARING 0x00000100
+#define APOLLON_2420_SDRC_MDCFG_0_DDR 0x00d04011
+#define APOLLON_2420_SDRC_MR_0_DDR 0x00000032
+
+/* optimized timings good for current shipping parts */
+#define APOLLON_242X_SDRC_ACTIM_CTRLA_0_100MHz 0x4A59B485
+#define APOLLON_242X_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000C
+
+#define APOLLON_242X_SDRC_ACTIM_CTRLA_0_166MHz 0x7BA35907
+#define APOLLON_242X_SDRC_ACTIM_CTRLB_0_166MHz 0x00000013
+
+#define APOLLON_242X_SDRC_RFR_CTRL_100MHz 0x00030001
+#define APOLLON_242X_SDRC_RFR_CTRL_166MHz 0x00044C01
+
+#define APOLLON_242x_SDRC_DLLAB_CTRL_100MHz 0x00007306
+#define APOLLON_242x_SDRC_DLLAB_CTRL_166MHz 0x00000506
+
+#ifdef PRCM_CONFIG_I
+#define APOLLON_2420_SDRC_ACTIM_CTRLA_0 APOLLON_242X_SDRC_ACTIM_CTRLA_0_166MHz
+#define APOLLON_2420_SDRC_ACTIM_CTRLB_0 APOLLON_242X_SDRC_ACTIM_CTRLB_0_166MHz
+#define APOLLON_2420_SDRC_RFR_CTRL APOLLON_242X_SDRC_RFR_CTRL_166MHz
+#define APOLLON_2420_SDRC_DLLAB_CTRL APOLLON_242x_SDRC_DLLAB_CTRL_166MHz
+#elif PRCM_CONFIG_II
+#define APOLLON_2420_SDRC_ACTIM_CTRLA_0 APOLLON_242X_SDRC_ACTIM_CTRLA_0_100MHz
+#define APOLLON_2420_SDRC_ACTIM_CTRLB_0 APOLLON_242X_SDRC_ACTIM_CTRLB_0_100MHz
+#define APOLLON_2420_SDRC_RFR_CTRL APOLLON_242X_SDRC_RFR_CTRL_100MHz
+#define APOLLON_2420_SDRC_DLLAB_CTRL APOLLON_242x_SDRC_DLLAB_CTRL_100MHz
+#endif
+
+/* GPMC settings */
+#ifdef PRCM_CONFIG_I /* L3 at 165MHz */
+/* CS0: OneNAND */
+# define APOLLON_24XX_GPMC_CONFIG1_0 0x00000001
+# define APOLLON_24XX_GPMC_CONFIG2_0 0x000c1000
+# define APOLLON_24XX_GPMC_CONFIG3_0 0x00030400
+# define APOLLON_24XX_GPMC_CONFIG4_0 0x0b841006
+# define APOLLON_24XX_GPMC_CONFIG5_0 0x020f0c11
+# define APOLLON_24XX_GPMC_CONFIG6_0 0x00000000
+# define APOLLON_24XX_GPMC_CONFIG7_0 (0x00000e40|(APOLLON_CS0_BASE >> 24))
+
+/* CS1: Ethernet */
+# define APOLLON_24XX_GPMC_CONFIG1_1 0x00011200
+# define APOLLON_24XX_GPMC_CONFIG2_1 0x001F1F01
+# define APOLLON_24XX_GPMC_CONFIG3_1 0x00080803
+# define APOLLON_24XX_GPMC_CONFIG4_1 0x1C0b1C0a
+# define APOLLON_24XX_GPMC_CONFIG5_1 0x041F1F1F
+# define APOLLON_24XX_GPMC_CONFIG6_1 0x000004C4
+# define APOLLON_24XX_GPMC_CONFIG7_1 (0x00000F40|(APOLLON_CS1_BASE >> 24))
+
+/* CS2: OneNAND */
+/* It's same as CS0 */
+# define APOLLON_24XX_GPMC_CONFIG7_2 (0x00000e40|(APOLLON_CS2_BASE >> 24))
+
+/* CS3: NOR */
+#ifdef ASYNC_NOR
+# define APOLLON_24XX_GPMC_CONFIG1_3 0x00021201
+# define APOLLON_24XX_GPMC_CONFIG2_3 0x00121601
+# define APOLLON_24XX_GPMC_CONFIG3_3 0x00040401
+# define APOLLON_24XX_GPMC_CONFIG4_3 0x12061605
+# define APOLLON_24XX_GPMC_CONFIG5_3 0x01151317
+#else
+# define SYNC_NOR_VALUE 0x24aaa
+# define APOLLON_24XX_GPMC_CONFIG1_3 0xe5011211
+# define APOLLON_24XX_GPMC_CONFIG2_3 0x00090b01
+# define APOLLON_24XX_GPMC_CONFIG3_3 0x00020201
+# define APOLLON_24XX_GPMC_CONFIG4_3 0x09030b03
+# define APOLLON_24XX_GPMC_CONFIG5_3 0x010a0a0c
+#endif /* ASYNC_NOR */
+# define APOLLON_24XX_GPMC_CONFIG6_3 0x00000000
+# define APOLLON_24XX_GPMC_CONFIG7_3 (0x00000e40|(APOLLON_CS3_BASE >> 24))
+#endif /* endif PRCM_CONFIG_I */
+
+#ifdef PRCM_CONFIG_II /* L3 at 100MHz */
+/* CS0: OneNAND */
+# define APOLLON_24XX_GPMC_CONFIG1_0 0x00000001
+# define APOLLON_24XX_GPMC_CONFIG2_0 0x00081080
+# define APOLLON_24XX_GPMC_CONFIG3_0 0x00030300
+# define APOLLON_24XX_GPMC_CONFIG4_0 0x08041004
+# define APOLLON_24XX_GPMC_CONFIG5_0 0x020b0910
+# define APOLLON_24XX_GPMC_CONFIG6_0 0x00000000
+# define APOLLON_24XX_GPMC_CONFIG7_0 (0x00000C40|(APOLLON_CS0_BASE >> 24))
+
+/* CS1: ethernet */
+# define APOLLON_24XX_GPMC_CONFIG1_1 0x00401203
+# define APOLLON_24XX_GPMC_CONFIG2_1 0x001F1F01
+# define APOLLON_24XX_GPMC_CONFIG3_1 0x00080803
+# define APOLLON_24XX_GPMC_CONFIG4_1 0x1C091C09
+# define APOLLON_24XX_GPMC_CONFIG5_1 0x041F1F1F
+# define APOLLON_24XX_GPMC_CONFIG6_1 0x000004C4
+# define APOLLON_24XX_GPMC_CONFIG7_1 (0x00000F40|(APOLLON_CS1_BASE >> 24))
+
+/* CS2: OneNAND */
+/* It's same as CS0 */
+# define APOLLON_24XX_GPMC_CONFIG7_2 (0x00000e40|(APOLLON_CS2_BASE >> 24))
+
+/* CS3: NOR */
+#define ASYNC_NOR
+#ifdef ASYNC_NOR
+# define APOLLON_24XX_GPMC_CONFIG1_3 0x00021201
+# define APOLLON_24XX_GPMC_CONFIG2_3 0x00121601
+# define APOLLON_24XX_GPMC_CONFIG3_3 0x00040401
+# define APOLLON_24XX_GPMC_CONFIG4_3 0x12061605
+# define APOLLON_24XX_GPMC_CONFIG5_3 0x01151317
+#else
+# define SYNC_NOR_VALUE 0x24aaa
+# define APOLLON_24XX_GPMC_CONFIG1_3 0xe1001202
+# define APOLLON_24XX_GPMC_CONFIG2_3 0x00151501
+# define APOLLON_24XX_GPMC_CONFIG3_3 0x00050501
+# define APOLLON_24XX_GPMC_CONFIG4_3 0x0e070e07
+# define APOLLON_24XX_GPMC_CONFIG5_3 0x01131F1F
+#endif /* ASYNC_NOR */
+# define APOLLON_24XX_GPMC_CONFIG6_3 0x00000000
+# define APOLLON_24XX_GPMC_CONFIG7_3 (0x00000C40|(APOLLON_CS3_BASE >> 24))
+#endif /* endif PRCM_CONFIG_II */
+
+#ifdef PRCM_CONFIG_III /* L3 at 133MHz */
+# ifdef CFG_NAND_BOOT
+# define APOLLON_24XX_GPMC_CONFIG1_0 0x0
+# define APOLLON_24XX_GPMC_CONFIG2_0 0x00141400
+# define APOLLON_24XX_GPMC_CONFIG3_0 0x00141400
+# define APOLLON_24XX_GPMC_CONFIG4_0 0x0F010F01
+# define APOLLON_24XX_GPMC_CONFIG5_0 0x010C1414
+# define APOLLON_24XX_GPMC_CONFIG6_0 0x00000A80
+# else /* NOR boot */
+# define APOLLON_24XX_GPMC_CONFIG1_0 0x3
+# define APOLLON_24XX_GPMC_CONFIG2_0 0x00151501
+# define APOLLON_24XX_GPMC_CONFIG3_0 0x00060602
+# define APOLLON_24XX_GPMC_CONFIG4_0 0x10081008
+# define APOLLON_24XX_GPMC_CONFIG5_0 0x01131F1F
+# define APOLLON_24XX_GPMC_CONFIG6_0 0x000004c4
+# endif /* endif CFG_NAND_BOOT */
+# define APOLLON_24XX_GPMC_CONFIG7_0 (0x00000C40|(APOLLON_CS0_BASE >> 24))
+# define APOLLON_24XX_GPMC_CONFIG1_1 0x00011000
+# define APOLLON_24XX_GPMC_CONFIG2_1 0x001f1f01
+# define APOLLON_24XX_GPMC_CONFIG3_1 0x00080803
+# define APOLLON_24XX_GPMC_CONFIG4_1 0x1C091C09
+# define APOLLON_24XX_GPMC_CONFIG5_1 0x041f1F1F
+# define APOLLON_24XX_GPMC_CONFIG6_1 0x000004C4
+# define APOLLON_24XX_GPMC_CONFIG7_1 (0x00000F40|(APOLLON_CS1_BASE >> 24))
+#endif /* endif CFG_PRCM_III */
+
+#endif /* endif _APOLLON_OMAP24XX_MEM_H_ */
--- /dev/null
+/*
+ * (C) Copyright 2005-2007
+ * Samsung Electronics,
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Derived from omap2420
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mem.h> /* get mem tables */
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+#include <i2c.h>
+
+/**************************************************************************
+ * get_prod_id() - get id info from chips
+ ***************************************************************************/
+static u32 get_prod_id(void)
+{
+ u32 p;
+ p = __raw_readl(PRODUCTION_ID); /* get production ID */
+ return ((p & CPU_242X_PID_MASK) >> 16);
+}
+
+/**************************************************************************
+ * get_cpu_type() - low level get cpu type
+ * - no C globals yet.
+ * - just looking to say if this is a 2422 or 2420 or ...
+ * - to start with we will look at switch settings..
+ * - 2422 id's same as 2420 for ES1 will rely on H4 board characteristics
+ * (mux for 2420, non-mux for 2422).
+ ***************************************************************************/
+u32 get_cpu_type(void)
+{
+ u32 v;
+
+ switch (get_prod_id()) {
+ case 1:; /* 2420 */
+ case 2:
+ return (CPU_2420);
+ break; /* 2420 pop */
+ case 4:
+ return (CPU_2422);
+ break;
+ case 8:
+ return (CPU_2423);
+ break;
+ default:
+ break; /* early 2420/2422's unmarked */
+ }
+
+ v = __raw_readl(TAP_IDCODE_REG);
+ v &= CPU_24XX_ID_MASK;
+ /* currently 2420 and 2422 have same id */
+ if (v == CPU_2420_CHIPID) {
+ if (is_gpmc_muxed() == GPMC_MUXED) /* if mux'ed */
+ return (CPU_2420);
+ else
+ return (CPU_2422);
+ } else
+ return (CPU_2420); /* don't know, say 2420 */
+}
+
+/******************************************
+ * get_cpu_rev(void) - extract version info
+ ******************************************/
+u32 get_cpu_rev(void)
+{
+ u32 v;
+ v = __raw_readl(TAP_IDCODE_REG);
+ v = v >> 28;
+ return (v + 1); /* currently 2422 and 2420 match up */
+}
+
+/****************************************************
+ * is_mem_sdr() - return 1 if mem type in use is SDR
+ ****************************************************/
+u32 is_mem_sdr(void)
+{
+ volatile u32 *burst = (volatile u32 *)(SDRC_MR_0 + SDRC_CS0_OSET);
+ if (*burst == H4_2420_SDRC_MR_0_SDR)
+ return (1);
+ return (0);
+}
+
+/***********************************************************
+ * get_mem_type() - identify type of mDDR part used.
+ * 2422 uses stacked DDR, 2 parts CS0/CS1.
+ * 2420 may have 1 or 2, no good way to know...only init 1...
+ * when eeprom data is up we can select 1 more.
+ *************************************************************/
+u32 get_mem_type(void)
+{
+ u32 cpu, sdr = is_mem_sdr();
+
+ cpu = get_cpu_type();
+ if (cpu == CPU_2422 || cpu == CPU_2423)
+ return (DDR_STACKED);
+
+ if (get_prod_id() == 0x2)
+ return (XDR_POP);
+
+ if (get_board_type() == BOARD_H4_MENELAUS)
+ if (sdr)
+ return (SDR_DISCRETE);
+ else
+ return (DDR_COMBO);
+ else if (sdr) /* SDP + SDR kit */
+ return (SDR_DISCRETE);
+ else
+ return (DDR_DISCRETE); /* origional SDP */
+}
+
+/***********************************************************************
+ * get_cs0_size() - get size of chip select 0/1
+ ************************************************************************/
+u32 get_sdr_cs_size(u32 offset)
+{
+ u32 size;
+ size = __raw_readl(SDRC_MCFG_0 + offset) >> 8; /* get ram size field */
+ size &= 0x2FF; /* remove unwanted bits */
+ size *= SZ_2M; /* find size in MB */
+ return (size);
+}
+
+/***********************************************************************
+ * get_board_type() - get board type based on current production stats.
+ * --- NOTE: 2 I2C EEPROMs will someday be populated with proper info.
+ * when they are available we can get info from there. This should
+ * be correct of all known boards up until today.
+ ************************************************************************/
+u32 get_board_type(void)
+{
+ return (BOARD_H4_SDP);
+}
+
+/******************************************************************
+ * get_sysboot_value() - get init word settings (dip switch on h4)
+ ******************************************************************/
+inline u32 get_sysboot_value(void)
+{
+ return (0x00000FFF & __raw_readl(CONTROL_STATUS));
+}
+
+/***************************************************************************
+ * get_gpmc0_base() - Return current address hardware will be
+ * fetching from. The below effectively gives what is correct, its a bit
+ * mis-leading compared to the TRM. For the most general case the mask
+ * needs to be also taken into account this does work in practice.
+ * - for u-boot we currently map:
+ * -- 0 to nothing,
+ * -- 4 to flash
+ * -- 8 to enent
+ * -- c to wifi
+ ****************************************************************************/
+u32 get_gpmc0_base(void)
+{
+ u32 b;
+
+ b = __raw_readl(GPMC_CONFIG7_0);
+ b &= 0x1F; /* keep base [5:0] */
+ b = b << 24; /* ret 0x0b000000 */
+ return (b);
+}
+
+/*****************************************************************
+ * is_gpmc_muxed() - tells if address/data lines are multiplexed
+ *****************************************************************/
+u32 is_gpmc_muxed(void)
+{
+ u32 mux;
+ mux = get_sysboot_value();
+ if ((mux & (BIT0 | BIT1 | BIT2 | BIT3)) == (BIT0 | BIT2 | BIT3))
+ return (GPMC_MUXED); /* NAND Boot mode */
+ if (mux & BIT1) /* if mux'ed */
+ return (GPMC_MUXED);
+ else
+ return (GPMC_NONMUXED);
+}
+
+/************************************************************************
+ * get_gpmc0_type() - read sysboot lines to see type of memory attached
+ ************************************************************************/
+u32 get_gpmc0_type(void)
+{
+ u32 type;
+ type = get_sysboot_value();
+ if ((type & (BIT3 | BIT2)) == (BIT3 | BIT2))
+ return (TYPE_NAND);
+ else
+ return (TYPE_NOR);
+}
+
+/*******************************************************************
+ * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
+ *******************************************************************/
+u32 get_gpmc0_width(void)
+{
+ u32 width;
+ width = get_sysboot_value();
+ if ((width & 0xF) == (BIT3 | BIT2))
+ return (WIDTH_8BIT);
+ else
+ return (WIDTH_16BIT);
+}
+
+/*********************************************************************
+ * wait_on_value() - common routine to allow waiting for changes in
+ * volatile regs.
+ *********************************************************************/
+u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
+{
+ u32 i = 0, val;
+ do {
+ ++i;
+ val = __raw_readl(read_addr) & read_bit_mask;
+ if (val == match_value)
+ return (1);
+ if (i == bound)
+ return (0);
+ } while (1);
+}
+
+/*********************************************************************
+ * display_board_info() - print banner with board info.
+ *********************************************************************/
+void display_board_info(u32 btype)
+{
+ char cpu_2420[] = "2420"; /* cpu type */
+ char cpu_2422[] = "2422";
+ char cpu_2423[] = "2423";
+ char db_men[] = "Menelaus"; /* board type */
+ char db_ip[] = "IP";
+ char mem_sdr[] = "mSDR"; /* memory type */
+ char mem_ddr[] = "mDDR";
+ char t_tst[] = "TST"; /* security level */
+ char t_emu[] = "EMU";
+ char t_hs[] = "HS";
+ char t_gp[] = "GP";
+ char unk[] = "?";
+
+ char *cpu_s, *db_s, *mem_s, *sec_s;
+ u32 cpu, rev, sec;
+
+ rev = get_cpu_rev();
+ cpu = get_cpu_type();
+ sec = get_device_type();
+
+ if (is_mem_sdr())
+ mem_s = mem_sdr;
+ else
+ mem_s = mem_ddr;
+
+ if (cpu == CPU_2423)
+ cpu_s = cpu_2423;
+ else if (cpu == CPU_2422)
+ cpu_s = cpu_2422;
+ else
+ cpu_s = cpu_2420;
+
+ if (btype == BOARD_H4_MENELAUS)
+ db_s = db_men;
+ else
+ db_s = db_ip;
+
+ switch (sec) {
+ case TST_DEVICE:
+ sec_s = t_tst;
+ break;
+ case EMU_DEVICE:
+ sec_s = t_emu;
+ break;
+ case HS_DEVICE:
+ sec_s = t_hs;
+ break;
+ case GP_DEVICE:
+ sec_s = t_gp;
+ break;
+ default:
+ sec_s = unk;
+ }
+
+ printf("OMAP%s-%s revision %d\n", cpu_s, sec_s, rev - 1);
+ printf("Samsung Apollon SDP Base Board + %s \n", mem_s);
+}
+
+/*************************************************************************
+ * get_board_rev() - setup to pass kernel board revision information
+ * 0 = 242x IP platform (first 2xx boards)
+ * 1 = 242x Menelaus platfrom.
+ *************************************************************************/
+u32 get_board_rev(void)
+{
+ u32 rev = 0;
+ u32 btype = get_board_type();
+
+ if (btype == BOARD_H4_MENELAUS)
+ rev = 1;
+ return (rev);
+}
+
+/********************************************************
+ * get_base(); get upper addr of current execution
+ *******************************************************/
+u32 get_base(void)
+{
+ u32 val;
+ __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory");
+ val &= 0xF0000000;
+ val >>= 28;
+ return (val);
+}
+
+/********************************************************
+ * get_base2(); get 2upper addr of current execution
+ *******************************************************/
+u32 get_base2(void)
+{
+ u32 val;
+ __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory");
+ val &= 0xFF000000;
+ val >>= 24;
+ return (val);
+}
+
+/********************************************************
+ * running_in_flash() - tell if currently running in
+ * flash.
+ *******************************************************/
+u32 running_in_flash(void)
+{
+ if (get_base() < 4)
+ return (1); /* in flash */
+ return (0); /* running in SRAM or SDRAM */
+}
+
+/********************************************************
+ * running_in_sram() - tell if currently running in
+ * sram.
+ *******************************************************/
+u32 running_in_sram(void)
+{
+ if (get_base() == 4)
+ return (1); /* in SRAM */
+ return (0); /* running in FLASH or SDRAM */
+}
+
+/********************************************************
+ * running_in_sdram() - tell if currently running in
+ * flash.
+ *******************************************************/
+u32 running_in_sdram(void)
+{
+ if (get_base() > 4)
+ return (1); /* in sdram */
+ return (0); /* running in SRAM or FLASH */
+}
+
+/*************************************************************
+ * running_from_internal_boot() - am I a signed NOR image.
+ *************************************************************/
+u32 running_from_internal_boot(void)
+{
+ u32 v, base;
+
+ v = get_sysboot_value() & BIT3;
+ base = get_base2();
+ /* if running at mask rom flash address and
+ * sysboot3 says this was an internal boot
+ */
+ if ((base == 0x08) && v)
+ return (1);
+ else
+ return (0);
+}
+
+/*************************************************************
+ * get_device_type(): tell if GP/HS/EMU/TST
+ *************************************************************/
+u32 get_device_type(void)
+{
+ int mode;
+ mode = __raw_readl(CONTROL_STATUS) & (BIT10 | BIT9 | BIT8);
+ return (mode >>= 8);
+}
--- /dev/null
+/*
+ *
+ * Copyright (C) 2005-2007 Samsung Electronics
+ * Kyungin Park <kyugnmin.park@samsung.com>
+ *
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm1136/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
unsigned char *glob_lcd_reg;
unsigned char *glob_lcd_mem;
-#ifdef CFG_LCD_ENDIAN
+#if defined(CFG_LCD_ENDIAN)
void lcd_setup(int lcd, int config)
{
if (lcd == 0) {
/*
* Set endianess and reset lcd controller 0 (small)
*/
- out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD0_RST); /* set reset to low */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_LCD0_RST); /* set reset to low */
udelay(10); /* wait 10us */
if (config == 1)
- out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD_ENDIAN); /* big-endian */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_LCD_ENDIAN); /* big-endian */
else
- out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD_ENDIAN); /* little-endian */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_LCD_ENDIAN); /* little-endian */
udelay(10); /* wait 10us */
- out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD0_RST); /* set reset to high */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_LCD0_RST); /* set reset to high */
} else {
/*
* Set endianess and reset lcd controller 1 (big)
*/
- out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD1_RST); /* set reset to low */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_LCD1_RST); /* set reset to low */
udelay(10); /* wait 10us */
if (config == 1)
- out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD_ENDIAN); /* big-endian */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_LCD_ENDIAN); /* big-endian */
else
- out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_LCD_ENDIAN); /* little-endian */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_LCD_ENDIAN); /* little-endian */
udelay(10); /* wait 10us */
- out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD1_RST); /* set reset to high */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_LCD1_RST); /* set reset to high */
}
/*
* CFG_LCD_ENDIAN may also be FPGA_RESET, so set inactive
*/
- out32(GPIO0_OR, in32(GPIO0_OR) | CFG_LCD_ENDIAN); /* set reset high again */
+ out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_LCD_ENDIAN); /* set reset high again */
}
-#endif /* #ifdef CFG_LCD_ENDIAN */
+#endif /* CFG_LCD_ENDIAN */
void lcd_bmp(uchar *logo_bmp)
* Check for bmp mark 'BM'
*/
if (*(ushort *)logo_bmp != 0x424d) {
-
/*
* Decompress bmp image
*/
*/
if ((colors <= 256) && (lcd_depth <= 8)) {
ptr = (unsigned char *)(dst + 14 + 40);
- for (i=0; i<colors; i++) {
+ for (i = 0; i < colors; i++) {
b = *ptr++;
g = *ptr++;
r = *ptr++;
ptr = glob_lcd_mem;
ptr2 = (ushort *)glob_lcd_mem;
header_size = 14 + 40 + 4*colors; /* skip bmp header */
- for (y=0; y<height; y++) {
+ for (y = 0; y < height; y++) {
bmp = &dst[(height-1-y)*line_size + header_size];
if (lcd_depth == 16) {
if (bpp == 24) {
- for (x=0; x<width; x++) {
+ for (x = 0; x < width; x++) {
/*
* Generate epson 16bpp fb-format from 24bpp image
*/
*ptr2++ = val;
}
} else if (bpp == 8) {
- for (x=0; x<line_size; x++) {
+ for (x = 0; x < line_size; x++) {
/* query rgb value from palette */
ptr = (unsigned char *)(dst + 14 + 40) ;
ptr += (*bmp++) << 2;
}
}
} else {
- for (x=0; x<line_size; x++) {
+ for (x = 0; x < line_size; x++)
*ptr++ = *bmp++;
- }
}
}
palette_value = 0x17;
lcd_depth = 8;
puts("LCD: S1D13704");
- } else if (in_8(&lcd_reg[0x10000]) == 0x24) {
+ } else if (in_8(&lcd_reg[0x10000]) == 0x24) {
/*
* Small epson detected (705)
*/
lcd_bmp(logo_bmp);
}
-#ifdef CONFIG_VIDEO_SM501
+#if defined(CONFIG_VIDEO_SM501)
int do_esdbmp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
ulong addr;
if (argc > 1) {
if (!strcmp(argv[1], "400")) {
- /* PLB=133MHz, PLB/PCI=4 */
+ /* PLB=133MHz, PLB/PCI=3 */
printf("Bootstrapping for 400MHz\n");
sdsdp[0]=0x8678624e;
- sdsdp[1]=0x0947a030;
+ sdsdp[1]=0x095fa030;
sdsdp[2]=0x40082350;
sdsdp[3]=0x0d050000;
} else if (!strcmp(argv[1], "533")) {
#include <asm/io.h>
#include <ppc440.h>
-#include "sdram.h"
+extern int denali_wait_for_dlllock(void);
+extern void denali_core_search_data_eye(void);
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \
- defined(CONFIG_DDR_DATA_EYE)
-/*-----------------------------------------------------------------------------+
- * wait_for_dlllock.
- +----------------------------------------------------------------------------*/
-static int wait_for_dlllock(void)
-{
- unsigned long val;
- int wait = 0;
-
- /* -----------------------------------------------------------+
- * Wait for the DCC master delay line to finish calibration
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_17);
- val = DDR0_17_DLLLOCKREG_UNLOCKED;
-
- while (wait != 0xffff) {
- val = mfdcr(ddrcfgd);
- if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED)
- /* dlllockreg bit on */
- return 0;
- else
- wait++;
- }
- debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
- debug("Waiting for dlllockreg bit to raise\n");
-
- return -1;
-}
-#endif
-
-#if defined(CONFIG_DDR_DATA_EYE)
-/*-----------------------------------------------------------------------------+
- * wait_for_dram_init_complete.
- +----------------------------------------------------------------------------*/
-int wait_for_dram_init_complete(void)
-{
- unsigned long val;
- int wait = 0;
-
- /* --------------------------------------------------------------+
- * Wait for 'DRAM initialization complete' bit in status register
- * -------------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_00);
-
- while (wait != 0xffff) {
- val = mfdcr(ddrcfgd);
- if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
- /* 'DRAM initialization complete' bit */
- return 0;
- else
- wait++;
- }
-
- debug("DRAM initialization complete bit in status register did not rise\n");
-
- return -1;
-}
-
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-/*-----------------------------------------------------------------------------+
- * denali_core_search_data_eye.
- +----------------------------------------------------------------------------*/
-void denali_core_search_data_eye(unsigned long memory_size)
-{
- int k, j;
- u32 val;
- u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
- u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
- u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
- u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
- volatile u32 *ram_pointer;
- u32 test[NUM_TRIES] = {
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
-
- ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE);
-
- for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
- /*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
-
- /* -----------------------------------------------------------+
- * De-assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- /* -----------------------------------------------------------+
- * Set 'wr_dqs_shift'
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_09);
- val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
- | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
- mtdcr(ddrcfgd, val);
-
- /* -----------------------------------------------------------+
- * Set 'dqs_out_shift' = wr_dqs_shift + 32
- * ----------------------------------------------------------*/
- dqs_out_shift = wr_dqs_shift + 32;
- mtdcr(ddrcfga, DDR0_22);
- val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
- | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
- mtdcr(ddrcfgd, val);
-
- passing_cases = 0;
-
- for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
- /*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
- /* -----------------------------------------------------------+
- * Set 'dll_dqs_delay_X'.
- * ----------------------------------------------------------*/
- /* dll_dqs_delay_0 */
- mtdcr(ddrcfga, DDR0_17);
- val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
- | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* dll_dqs_delay_1 to dll_dqs_delay_4 */
- mtdcr(ddrcfga, DDR0_18);
- val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
- | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* dll_dqs_delay_5 to dll_dqs_delay_8 */
- mtdcr(ddrcfga, DDR0_19);
- val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
- | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
-
- ppcMsync();
- ppcMbar();
-
- /* -----------------------------------------------------------+
- * Assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
- mtdcr(ddrcfgd, val);
-
- ppcMsync();
- ppcMbar();
-
- /* -----------------------------------------------------------+
- * Wait for the DCC master delay line to finish calibration
- * ----------------------------------------------------------*/
- if (wait_for_dlllock() != 0) {
- printf("dlllock did not occur !!!\n");
- printf("denali_core_search_data_eye!!!\n");
- printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
- wr_dqs_shift, dll_dqs_delay_X);
- hang();
- }
- ppcMsync();
- ppcMbar();
-
- if (wait_for_dram_init_complete() != 0) {
- printf("dram init complete did not occur !!!\n");
- printf("denali_core_search_data_eye!!!\n");
- printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
- wr_dqs_shift, dll_dqs_delay_X);
- hang();
- }
- udelay(100); /* wait 100us to ensure init is really completed !!! */
-
- /* write values */
- for (j=0; j<NUM_TRIES; j++) {
- ram_pointer[j] = test[j];
-
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
- }
-
- /* read values back */
- for (j=0; j<NUM_TRIES; j++) {
- for (k=0; k<NUM_READS; k++) {
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-
- if (ram_pointer[j] != test[j])
- break;
- }
-
- /* read error */
- if (k != NUM_READS)
- break;
- }
-
- /* See if the dll_dqs_delay_X value passed.*/
- if (j < NUM_TRIES) {
- /* Failed */
- passing_cases = 0;
- /* break; */
- } else {
- /* Passed */
- if (passing_cases == 0)
- dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
- passing_cases++;
- if (passing_cases >= max_passing_cases) {
- max_passing_cases = passing_cases;
- wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
- dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
- dll_dqs_delay_X_end_window = dll_dqs_delay_X;
- }
- }
-
- /* -----------------------------------------------------------+
- * De-assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
-
- } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
-
- /* -----------------------------------------------------------+
- * Largest passing window is now detected.
- * ----------------------------------------------------------*/
-
- /* Compute dll_dqs_delay_X value */
- dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
- wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
-
- debug("DQS calibration - Window detected:\n");
- debug("max_passing_cases = %d\n", max_passing_cases);
- debug("wr_dqs_shift = %d\n", wr_dqs_shift);
- debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X);
- debug("dll_dqs_delay_X window = %d - %d\n",
- dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
-
- /* -----------------------------------------------------------+
- * De-assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- /* -----------------------------------------------------------+
- * Set 'wr_dqs_shift'
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_09);
- val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
- | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
- mtdcr(ddrcfgd, val);
- debug("DDR0_09=0x%08lx\n", val);
-
- /* -----------------------------------------------------------+
- * Set 'dqs_out_shift' = wr_dqs_shift + 32
- * ----------------------------------------------------------*/
- dqs_out_shift = wr_dqs_shift + 32;
- mtdcr(ddrcfga, DDR0_22);
- val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
- | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
- mtdcr(ddrcfgd, val);
- debug("DDR0_22=0x%08lx\n", val);
-
- /* -----------------------------------------------------------+
- * Set 'dll_dqs_delay_X'.
- * ----------------------------------------------------------*/
- /* dll_dqs_delay_0 */
- mtdcr(ddrcfga, DDR0_17);
- val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
- | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_17=0x%08lx\n", val);
-
- /* dll_dqs_delay_1 to dll_dqs_delay_4 */
- mtdcr(ddrcfga, DDR0_18);
- val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
- | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_18=0x%08lx\n", val);
-
- /* dll_dqs_delay_5 to dll_dqs_delay_8 */
- mtdcr(ddrcfga, DDR0_19);
- val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
- | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_19=0x%08lx\n", val);
-
- /* -----------------------------------------------------------+
- * Assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
- mtdcr(ddrcfgd, val);
-
- ppcMsync();
- ppcMbar();
-
- /* -----------------------------------------------------------+
- * Wait for the DCC master delay line to finish calibration
- * ----------------------------------------------------------*/
- if (wait_for_dlllock() != 0) {
- printf("dlllock did not occur !!!\n");
- hang();
- }
- ppcMsync();
- ppcMbar();
-
- if (wait_for_dram_init_complete() != 0) {
- printf("dram init complete did not occur !!!\n");
- hang();
- }
- udelay(100); /* wait 100us to ensure init is really completed !!! */
-}
-#endif /* CONFIG_DDR_DATA_EYE */
#if defined(CONFIG_NAND_SPL)
/* Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
mtsdram(DDR0_44, 0x00000003);
mtsdram(DDR0_02, 0x00000001);
- wait_for_dlllock();
+ denali_wait_for_dlllock();
#endif /* #ifndef CONFIG_NAND_U_BOOT */
#ifdef CONFIG_DDR_DATA_EYE
/* -----------------------------------------------------------+
* Perform data eye search if requested.
* ----------------------------------------------------------*/
- denali_core_search_data_eye(CFG_MBYTES_SDRAM << 20);
+ denali_core_search_data_eye();
#endif
return (CFG_MBYTES_SDRAM << 20);
+++ /dev/null
-/*
- * (C) Copyright 2006
- * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
- * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
- * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SPD_SDRAM_DENALI_H_
-#define _SPD_SDRAM_DENALI_H_
-
-#define ppcMsync sync
-#define ppcMbar eieio
-
-/* General definitions */
-#define MAX_SPD_BYTE 128 /* highest SPD byte # to read */
-#define DENALI_REG_NUMBER 45 /* 45 Regs in PPC440EPx Denali Core */
-#define SUPPORTED_DIMMS_NB 7 /* Number of supported DIMM modules types */
-#define SDRAM_NONE 0 /* No DIMM detected in Slot */
-#define MAXRANKS 2 /* 2 ranks maximum */
-
-/* Supported PLB Frequencies */
-#define PLB_FREQ_133MHZ 133333333
-#define PLB_FREQ_152MHZ 152000000
-#define PLB_FREQ_160MHZ 160000000
-#define PLB_FREQ_166MHZ 166666666
-
-/* Denali Core Registers */
-#define SDRAM_DCR_BASE 0x10
-
-#define DDR_DCR_BASE 0x10
-#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */
-#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */
-
-/*-----------------------------------------------------------------------------+
- | Values for ddrcfga register - indirect addressing of these regs
- +-----------------------------------------------------------------------------*/
-
-#define DDR0_00 0x00
-#define DDR0_00_INT_ACK_MASK 0x7F000000 /* Write only */
-#define DDR0_00_INT_ACK_ALL 0x7F000000
-#define DDR0_00_INT_ACK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_00_INT_ACK_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-/* Status */
-#define DDR0_00_INT_STATUS_MASK 0x00FF0000 /* Read only */
-/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
-#define DDR0_00_INT_STATUS_BIT0 0x00010000
-/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
-#define DDR0_00_INT_STATUS_BIT1 0x00020000
-/* Bit2. Single correctable ECC event detected */
-#define DDR0_00_INT_STATUS_BIT2 0x00040000
-/* Bit3. Multiple correctable ECC events detected. */
-#define DDR0_00_INT_STATUS_BIT3 0x00080000
-/* Bit4. Single uncorrectable ECC event detected. */
-#define DDR0_00_INT_STATUS_BIT4 0x00100000
-/* Bit5. Multiple uncorrectable ECC events detected. */
-#define DDR0_00_INT_STATUS_BIT5 0x00200000
-/* Bit6. DRAM initialization complete. */
-#define DDR0_00_INT_STATUS_BIT6 0x00400000
-/* Bit7. Logical OR of all lower bits. */
-#define DDR0_00_INT_STATUS_BIT7 0x00800000
-
-#define DDR0_00_INT_STATUS_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_00_INT_STATUS_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_00_DLL_INCREMENT_MASK 0x00007F00
-#define DDR0_00_DLL_INCREMENT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_00_DLL_INCREMENT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_00_DLL_START_POINT_MASK 0x0000007F
-#define DDR0_00_DLL_START_POINT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_00_DLL_START_POINT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-
-#define DDR0_01 0x01
-#define DDR0_01_PLB0_DB_CS_LOWER_MASK 0x1F000000
-#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_01_PLB0_DB_CS_UPPER_MASK 0x001F0000
-#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
-#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n) ((((unsigned long)(n))>>16)&0x1F)
-#define DDR0_01_OUT_OF_RANGE_TYPE_MASK 0x00000700 /* Read only */
-#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
-#define DDR0_01_INT_MASK_MASK 0x000000FF
-#define DDR0_01_INT_MASK_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_01_INT_MASK_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
-#define DDR0_01_INT_MASK_ALL_ON 0x000000FF
-#define DDR0_01_INT_MASK_ALL_OFF 0x00000000
-
-#define DDR0_02 0x02
-#define DDR0_02_MAX_CS_REG_MASK 0x02000000 /* Read only */
-#define DDR0_02_MAX_CS_REG_ENCODE(n) ((((unsigned long)(n))&0x2)<<24)
-#define DDR0_02_MAX_CS_REG_DECODE(n) ((((unsigned long)(n))>>24)&0x2)
-#define DDR0_02_MAX_COL_REG_MASK 0x000F0000 /* Read only */
-#define DDR0_02_MAX_COL_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<16)
-#define DDR0_02_MAX_COL_REG_DECODE(n) ((((unsigned long)(n))>>16)&0xF)
-#define DDR0_02_MAX_ROW_REG_MASK 0x00000F00 /* Read only */
-#define DDR0_02_MAX_ROW_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_02_MAX_ROW_REG_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_02_START_MASK 0x00000001
-#define DDR0_02_START_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_02_START_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-#define DDR0_02_START_OFF 0x00000000
-#define DDR0_02_START_ON 0x00000001
-
-#define DDR0_03 0x03
-#define DDR0_03_BSTLEN_MASK 0x07000000
-#define DDR0_03_BSTLEN_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_03_BSTLEN_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_03_CASLAT_MASK 0x00070000
-#define DDR0_03_CASLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_03_CASLAT_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_03_CASLAT_LIN_MASK 0x00000F00
-#define DDR0_03_CASLAT_LIN_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_03_CASLAT_LIN_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_03_INITAREF_MASK 0x0000000F
-#define DDR0_03_INITAREF_ENCODE(n) ((((unsigned long)(n))&0xF)<<0)
-#define DDR0_03_INITAREF_DECODE(n) ((((unsigned long)(n))>>0)&0xF)
-
-#define DDR0_04 0x04
-#define DDR0_04_TRC_MASK 0x1F000000
-#define DDR0_04_TRC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_04_TRC_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_04_TRRD_MASK 0x00070000
-#define DDR0_04_TRRD_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_04_TRRD_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_04_TRTP_MASK 0x00000700
-#define DDR0_04_TRTP_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_04_TRTP_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
-
-#define DDR0_05 0x05
-#define DDR0_05_TMRD_MASK 0x1F000000
-#define DDR0_05_TMRD_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_05_TMRD_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_05_TEMRS_MASK 0x00070000
-#define DDR0_05_TEMRS_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_05_TEMRS_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_05_TRP_MASK 0x00000F00
-#define DDR0_05_TRP_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_05_TRP_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_05_TRAS_MIN_MASK 0x000000FF
-#define DDR0_05_TRAS_MIN_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_05_TRAS_MIN_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
-
-#define DDR0_06 0x06
-#define DDR0_06_WRITEINTERP_MASK 0x01000000
-#define DDR0_06_WRITEINTERP_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_06_WRITEINTERP_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_06_TWTR_MASK 0x00070000
-#define DDR0_06_TWTR_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_06_TWTR_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_06_TDLL_MASK 0x0000FF00
-#define DDR0_06_TDLL_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_06_TDLL_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
-#define DDR0_06_TRFC_MASK 0x0000007F
-#define DDR0_06_TRFC_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_06_TRFC_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_07 0x07
-#define DDR0_07_NO_CMD_INIT_MASK 0x01000000
-#define DDR0_07_NO_CMD_INIT_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_07_NO_CMD_INIT_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_07_TFAW_MASK 0x001F0000
-#define DDR0_07_TFAW_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
-#define DDR0_07_TFAW_DECODE(n) ((((unsigned long)(n))>>16)&0x1F)
-#define DDR0_07_AUTO_REFRESH_MODE_MASK 0x00000100
-#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
-#define DDR0_07_AREFRESH_MASK 0x00000001
-#define DDR0_07_AREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_07_AREFRESH_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_08 0x08
-#define DDR0_08_WRLAT_MASK 0x07000000
-#define DDR0_08_WRLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_08_WRLAT_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_08_TCPD_MASK 0x00FF0000
-#define DDR0_08_TCPD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_08_TCPD_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_08_DQS_N_EN_MASK 0x00000100
-#define DDR0_08_DQS_N_EN_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_08_DQS_N_EN_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
-#define DDR0_08_DDRII_SDRAM_MODE_MASK 0x00000001
-#define DDR0_08_DDRII_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_08_DDRII_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_09 0x09
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK 0x1F000000
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_09_RTT_0_MASK 0x00030000
-#define DDR0_09_RTT_0_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
-#define DDR0_09_RTT_0_DECODE(n) ((((unsigned long)(n))>>16)&0x3)
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK 0x00007F00
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_09_WR_DQS_SHIFT_MASK 0x0000007F
-#define DDR0_09_WR_DQS_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_09_WR_DQS_SHIFT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_10 0x0A
-#define DDR0_10_WRITE_MODEREG_MASK 0x00010000 /* Write only */
-#define DDR0_10_WRITE_MODEREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_10_WRITE_MODEREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_10_CS_MAP_MASK 0x00000300
-#define DDR0_10_CS_MAP_NO_MEM 0x00000000
-#define DDR0_10_CS_MAP_RANK0_INSTALLED 0x00000100
-#define DDR0_10_CS_MAP_RANK1_INSTALLED 0x00000200
-#define DDR0_10_CS_MAP_ENCODE(n) ((((unsigned long)(n))&0x3)<<8)
-#define DDR0_10_CS_MAP_DECODE(n) ((((unsigned long)(n))>>8)&0x3)
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK 0x0000001F
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0)
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F)
-
-#define DDR0_11 0x0B
-#define DDR0_11_SREFRESH_MASK 0x01000000
-#define DDR0_11_SREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_11_SREFRESH_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_11_TXSNR_MASK 0x00FF0000
-#define DDR0_11_TXSNR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_11_TXSNR_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_11_TXSR_MASK 0x0000FF00
-#define DDR0_11_TXSR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_11_TXSR_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
-
-#define DDR0_12 0x0C
-#define DDR0_12_TCKE_MASK 0x0000007
-#define DDR0_12_TCKE_ENCODE(n) ((((unsigned long)(n))&0x7)<<0)
-#define DDR0_12_TCKE_DECODE(n) ((((unsigned long)(n))>>0)&0x7)
-
-#define DDR0_13 0x0D
-
-#define DDR0_14 0x0E
-#define DDR0_14_DLL_BYPASS_MODE_MASK 0x01000000
-#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_14_DLL_BYPASS_MODE_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_14_REDUC_MASK 0x00010000
-#define DDR0_14_REDUC_64BITS 0x00000000
-#define DDR0_14_REDUC_32BITS 0x00010000
-#define DDR0_14_REDUC_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_14_REDUC_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_14_REG_DIMM_ENABLE_MASK 0x00000100
-#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_14_REG_DIMM_ENABLE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
-
-#define DDR0_15 0x0F
-
-#define DDR0_16 0x10
-
-#define DDR0_17 0x11
-#define DDR0_17_DLL_DQS_DELAY_0_MASK 0x7F000000
-#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */
-#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000
-#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000
-#define DDR0_17_DLLLOCKREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_17_DLLLOCKREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_17_DLL_LOCK_MASK 0x00007F00 /* Read only */
-#define DDR0_17_DLL_LOCK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_17_DLL_LOCK_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-
-#define DDR0_18 0x12
-#define DDR0_18_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
-#define DDR0_18_DLL_DQS_DELAY_4_MASK 0x7F000000
-#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_3_MASK 0x007F0000
-#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_2_MASK 0x00007F00
-#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_1_MASK 0x0000007F
-#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_19 0x13
-#define DDR0_19_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
-#define DDR0_19_DLL_DQS_DELAY_8_MASK 0x7F000000
-#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_7_MASK 0x007F0000
-#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_6_MASK 0x00007F00
-#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_5_MASK 0x0000007F
-#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_20 0x14
-#define DDR0_20_DLL_DQS_BYPASS_3_MASK 0x7F000000
-#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_2_MASK 0x007F0000
-#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_1_MASK 0x00007F00
-#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_0_MASK 0x0000007F
-#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_21 0x15
-#define DDR0_21_DLL_DQS_BYPASS_7_MASK 0x7F000000
-#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_6_MASK 0x007F0000
-#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_5_MASK 0x00007F00
-#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_4_MASK 0x0000007F
-#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_22 0x16
-/* ECC */
-#define DDR0_22_CTRL_RAW_MASK 0x03000000
-#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000 /* ECC not being used */
-#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000 /* ECC checking is on, but no attempts to correct*/
-#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000 /* No ECC RAM storage available */
-#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000 /* ECC checking and correcting on */
-#define DDR0_22_CTRL_RAW_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_22_CTRL_RAW_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
-
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_22_DQS_OUT_SHIFT_MASK 0x00007F00
-#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_22_DQS_OUT_SHIFT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_22_DLL_DQS_BYPASS_8_MASK 0x0000007F
-#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-
-#define DDR0_23 0x17
-#define DDR0_23_ODT_RD_MAP_CS0_MASK 0x03000000
-#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
-#define DDR0_23_ECC_C_SYND_MASK 0x00FF0000 /* Read only */
-#define DDR0_23_ECC_C_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_23_ECC_C_SYND_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_23_ECC_U_SYND_MASK 0x0000FF00 /* Read only */
-#define DDR0_23_ECC_U_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_23_ECC_U_SYND_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
-#define DDR0_23_FWC_MASK 0x00000001 /* Write only */
-#define DDR0_23_FWC_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_23_FWC_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_24 0x18
-#define DDR0_24_RTT_PAD_TERMINATION_MASK 0x03000000
-#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
-#define DDR0_24_ODT_WR_MAP_CS1_MASK 0x00030000
-#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
-#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>16)&0x3)
-#define DDR0_24_ODT_RD_MAP_CS1_MASK 0x00000300
-#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<8)
-#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>8)&0x3)
-#define DDR0_24_ODT_WR_MAP_CS0_MASK 0x00000003
-#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<0)
-#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>0)&0x3)
-
-#define DDR0_25 0x19
-#define DDR0_25_VERSION_MASK 0xFFFF0000 /* Read only */
-#define DDR0_25_VERSION_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16)
-#define DDR0_25_VERSION_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF)
-#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK 0x000003FF /* Read only */
-#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
-#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
-
-#define DDR0_26 0x1A
-#define DDR0_26_TRAS_MAX_MASK 0xFFFF0000
-#define DDR0_26_TRAS_MAX_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16)
-#define DDR0_26_TRAS_MAX_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF)
-#define DDR0_26_TREF_MASK 0x00003FFF
-#define DDR0_26_TREF_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
-#define DDR0_26_TREF_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
-
-#define DDR0_27 0x1B
-#define DDR0_27_EMRS_DATA_MASK 0x3FFF0000
-#define DDR0_27_EMRS_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16)
-#define DDR0_27_EMRS_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF)
-#define DDR0_27_TINIT_MASK 0x0000FFFF
-#define DDR0_27_TINIT_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0)
-#define DDR0_27_TINIT_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF)
-
-#define DDR0_28 0x1C
-#define DDR0_28_EMRS3_DATA_MASK 0x3FFF0000
-#define DDR0_28_EMRS3_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16)
-#define DDR0_28_EMRS3_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF)
-#define DDR0_28_EMRS2_DATA_MASK 0x00003FFF
-#define DDR0_28_EMRS2_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0)
-#define DDR0_28_EMRS2_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF)
-
-#define DDR0_29 0x1D
-
-#define DDR0_30 0x1E
-
-#define DDR0_31 0x1F
-#define DDR0_31_XOR_CHECK_BITS_MASK 0x0000FFFF
-#define DDR0_31_XOR_CHECK_BITS_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0)
-#define DDR0_31_XOR_CHECK_BITS_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF)
-
-#define DDR0_32 0x20
-#define DDR0_32_OUT_OF_RANGE_ADDR_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_33 0x21
-#define DDR0_33_OUT_OF_RANGE_ADDR_MASK 0x00000001 /* Read only */
-#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_34 0x22
-#define DDR0_34_ECC_U_ADDR_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_34_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_34_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_35 0x23
-#define DDR0_35_ECC_U_ADDR_MASK 0x00000001 /* Read only */
-#define DDR0_35_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_35_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_36 0x24
-#define DDR0_36_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_36_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_36_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_37 0x25
-#define DDR0_37_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_37_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_37_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_38 0x26
-#define DDR0_38_ECC_C_ADDR_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_38_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_38_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_39 0x27
-#define DDR0_39_ECC_C_ADDR_MASK 0x00000001 /* Read only */
-#define DDR0_39_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_39_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_40 0x28
-#define DDR0_40_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_40_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_40_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_41 0x29
-#define DDR0_41_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_41_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_41_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_42 0x2A
-#define DDR0_42_ADDR_PINS_MASK 0x07000000
-#define DDR0_42_ADDR_PINS_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_42_ADDR_PINS_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_42_CASLAT_LIN_GATE_MASK 0x0000000F
-#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n) ((((unsigned long)(n))&0xF)<<0)
-#define DDR0_42_CASLAT_LIN_GATE_DECODE(n) ((((unsigned long)(n))>>0)&0xF)
-
-#define DDR0_43 0x2B
-#define DDR0_43_TWR_MASK 0x07000000
-#define DDR0_43_TWR_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_43_TWR_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_43_APREBIT_MASK 0x000F0000
-#define DDR0_43_APREBIT_ENCODE(n) ((((unsigned long)(n))&0xF)<<16)
-#define DDR0_43_APREBIT_DECODE(n) ((((unsigned long)(n))>>16)&0xF)
-#define DDR0_43_COLUMN_SIZE_MASK 0x00000700
-#define DDR0_43_COLUMN_SIZE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_43_COLUMN_SIZE_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
-#define DDR0_43_EIGHT_BANK_MODE_MASK 0x00000001
-#define DDR0_43_EIGHT_BANK_MODE_8_BANKS 0x00000001
-#define DDR0_43_EIGHT_BANK_MODE_4_BANKS 0x00000000
-#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_43_EIGHT_BANK_MODE_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_44 0x2C
-#define DDR0_44_TRCD_MASK 0x000000FF
-#define DDR0_44_TRCD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_44_TRCD_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
-
-#endif /* _SPD_SDRAM_DENALI_H_ */
COBJS := sys_eeprom.o \
pixis.o \
- pq-mds-pib.o
+ pq-mds-pib.o \
+ fsl_logo_bmp.o \
+ fsl_diu_fb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
--- /dev/null
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * York Sun <yorksun@freescale.com>
+ *
+ * FSL DIU Framebuffer driver
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <malloc.h>
+
+#ifdef CONFIG_FSL_DIU_FB
+
+#include "fsl_diu_fb.h"
+
+#ifdef DEBUG
+#define DPRINTF(fmt, args...) printf("%s: " fmt,__FUNCTION__,## args)
+#else
+#define DPRINTF(fmt, args...)
+#endif
+
+struct fb_videomode {
+ const char *name; /* optional */
+ unsigned int refresh; /* optional */
+ unsigned int xres;
+ unsigned int yres;
+ unsigned int pixclock;
+ unsigned int left_margin;
+ unsigned int right_margin;
+ unsigned int upper_margin;
+ unsigned int lower_margin;
+ unsigned int hsync_len;
+ unsigned int vsync_len;
+ unsigned int sync;
+ unsigned int vmode;
+ unsigned int flag;
+};
+
+#define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */
+#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */
+#define FB_VMODE_NONINTERLACED 0 /* non interlaced */
+
+/*
+ * These parameters give default parameters
+ * for video output 1024x768,
+ * FIXME - change timing to proper amounts
+ * hsync 31.5kHz, vsync 60Hz
+ */
+static struct fb_videomode fsl_diu_mode_1024 = {
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 160,
+ .right_margin = 24,
+ .upper_margin = 29,
+ .lower_margin = 3,
+ .hsync_len = 136,
+ .vsync_len = 6,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
+static struct fb_videomode fsl_diu_mode_1280 = {
+ .name = "1280x1024-60",
+ .refresh = 60,
+ .xres = 1280,
+ .yres = 1024,
+ .pixclock = 9375,
+ .left_margin = 38,
+ .right_margin = 128,
+ .upper_margin = 2,
+ .lower_margin = 7,
+ .hsync_len = 216,
+ .vsync_len = 37,
+ .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
+/*
+ * These are the fields of area descriptor(in DDR memory) for every plane
+ */
+struct diu_ad {
+ /* Word 0(32-bit) in DDR memory */
+ unsigned int pix_fmt; /* hard coding pixel format */
+ /* Word 1(32-bit) in DDR memory */
+ unsigned int addr;
+ /* Word 2(32-bit) in DDR memory */
+ unsigned int src_size_g_alpha;
+ /* Word 3(32-bit) in DDR memory */
+ unsigned int aoi_size;
+ /* Word 4(32-bit) in DDR memory */
+ unsigned int offset_xyi;
+ /* Word 5(32-bit) in DDR memory */
+ unsigned int offset_xyd;
+ /* Word 6(32-bit) in DDR memory */
+ unsigned int ckmax_r:8;
+ unsigned int ckmax_g:8;
+ unsigned int ckmax_b:8;
+ unsigned int res9:8;
+ /* Word 7(32-bit) in DDR memory */
+ unsigned int ckmin_r:8;
+ unsigned int ckmin_g:8;
+ unsigned int ckmin_b:8;
+ unsigned int res10:8;
+ /* Word 8(32-bit) in DDR memory */
+ unsigned int next_ad;
+ /* Word 9(32-bit) in DDR memory, just for 64-bit aligned */
+ unsigned int res1;
+ unsigned int res2;
+ unsigned int res3;
+}__attribute__ ((packed));
+
+/*
+ * DIU register map
+ */
+struct diu {
+ unsigned int desc[3];
+ unsigned int gamma;
+ unsigned int pallete;
+ unsigned int cursor;
+ unsigned int curs_pos;
+ unsigned int diu_mode;
+ unsigned int bgnd;
+ unsigned int bgnd_wb;
+ unsigned int disp_size;
+ unsigned int wb_size;
+ unsigned int wb_mem_addr;
+ unsigned int hsyn_para;
+ unsigned int vsyn_para;
+ unsigned int syn_pol;
+ unsigned int thresholds;
+ unsigned int int_status;
+ unsigned int int_mask;
+ unsigned int colorbar[8];
+ unsigned int filling;
+ unsigned int plut;
+} __attribute__ ((packed));
+
+struct diu_hw {
+ struct diu *diu_reg;
+ volatile unsigned int mode; /* DIU operation mode */
+};
+
+struct diu_addr {
+ unsigned char * paddr; /* Virtual address */
+ unsigned int offset;
+};
+
+#define FSL_DIU_BASE_OFFSET 0x2C000 /* Offset of Display Interface Unit */
+
+/*
+ * Modes of operation of DIU
+ */
+#define MFB_MODE0 0 /* DIU off */
+#define MFB_MODE1 1 /* All three planes output to display */
+#define MFB_MODE2 2 /* Plane 1 to display,
+ * planes 2+3 written back to memory */
+#define MFB_MODE3 3 /* All three planes written back to memory */
+#define MFB_MODE4 4 /* Color bar generation */
+
+#define MAX_CURS 32
+
+static struct fb_info fsl_fb_info;
+static struct diu_addr gamma, cursor;
+static struct diu_ad fsl_diu_fb_ad __attribute__ ((aligned(32)));
+static struct diu_ad dummy_ad __attribute__ ((aligned(32)));
+static unsigned char *dummy_fb;
+static struct diu_hw dr = {
+ .mode = MFB_MODE1,
+};
+
+int fb_enabled = 0;
+int fb_initialized = 0;
+const int default_xres = 1280;
+const int default_pixel_format = 0x88882317;
+
+static int map_video_memory(struct fb_info *info, unsigned long bytes_align);
+static void enable_lcdc(void);
+static void disable_lcdc(void);
+static int fsl_diu_enable_panel(struct fb_info *info);
+static int fsl_diu_disable_panel(struct fb_info *info);
+static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align);
+static u32 get_busfreq(void);
+
+int fsl_diu_init(int xres,
+ unsigned int pixel_format,
+ int gamma_fix,
+ unsigned char *splash_bmp)
+{
+ struct fb_videomode *fsl_diu_mode_db;
+ struct diu_ad *ad = &fsl_diu_fb_ad;
+ struct diu *hw;
+ struct fb_info *info = &fsl_fb_info;
+ struct fb_var_screeninfo *var = &info->var;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ volatile unsigned int *guts_clkdvdr = &gur->clkdvdr;
+ unsigned char *gamma_table_base;
+ unsigned int i, j;
+ unsigned long speed_ccb, temp, pixval;
+
+ DPRINTF("Enter fsl_diu_init\n");
+ dr.diu_reg = (struct diu *) (CFG_IMMR + FSL_DIU_BASE_OFFSET);
+ hw = (struct diu *) dr.diu_reg;
+
+ disable_lcdc();
+
+ if (xres == 1280) {
+ fsl_diu_mode_db = &fsl_diu_mode_1280;
+ } else {
+ fsl_diu_mode_db = &fsl_diu_mode_1024;
+ }
+
+ if (0 == fb_initialized) {
+ allocate_buf(&gamma, 768, 32);
+ DPRINTF("gamma is allocated @ 0x%x\n",
+ (unsigned int)gamma.paddr);
+ allocate_buf(&cursor, MAX_CURS * MAX_CURS * 2, 32);
+ DPRINTF("curosr is allocated @ 0x%x\n",
+ (unsigned int)cursor.paddr);
+
+ /* create a dummy fb and dummy ad */
+ dummy_fb = malloc(64);
+ if (NULL == dummy_fb) {
+ printf("Cannot allocate dummy fb\n");
+ return -1;
+ }
+ dummy_ad.addr = cpu_to_le32((unsigned int)dummy_fb);
+ dummy_ad.pix_fmt = 0x88882317;
+ dummy_ad.src_size_g_alpha = 0x04400000; /* alpha = 0 */
+ dummy_ad.aoi_size = 0x02000400;
+ dummy_ad.offset_xyi = 0;
+ dummy_ad.offset_xyd = 0;
+ dummy_ad.next_ad = 0;
+ /* Memory allocation for framebuffer */
+ if (map_video_memory(info, 32)) {
+ printf("Unable to allocate fb memory 1\n");
+ return -1;
+ }
+ } else {
+ memset(info->screen_base, 0, info->smem_len);
+ }
+
+ dr.diu_reg->desc[0] = (unsigned int) &dummy_ad;
+ dr.diu_reg->desc[1] = (unsigned int) &dummy_ad;
+ dr.diu_reg->desc[2] = (unsigned int) &dummy_ad;
+ DPRINTF("dummy dr.diu_reg->desc[0] = 0x%x\n", dr.diu_reg->desc[0]);
+ DPRINTF("dummy desc[0] = 0x%x\n", hw->desc[0]);
+
+ /* read mode info */
+ var->xres = fsl_diu_mode_db->xres;
+ var->yres = fsl_diu_mode_db->yres;
+ var->bits_per_pixel = 32;
+ var->pixclock = fsl_diu_mode_db->pixclock;
+ var->left_margin = fsl_diu_mode_db->left_margin;
+ var->right_margin = fsl_diu_mode_db->right_margin;
+ var->upper_margin = fsl_diu_mode_db->upper_margin;
+ var->lower_margin = fsl_diu_mode_db->lower_margin;
+ var->hsync_len = fsl_diu_mode_db->hsync_len;
+ var->vsync_len = fsl_diu_mode_db->vsync_len;
+ var->sync = fsl_diu_mode_db->sync;
+ var->vmode = fsl_diu_mode_db->vmode;
+ info->line_length = var->xres * var->bits_per_pixel / 8;
+ info->logo_size = 0;
+ info->logo_height = 0;
+
+ ad->pix_fmt = pixel_format;
+ ad->addr = cpu_to_le32((unsigned int)info->screen_base);
+ ad->src_size_g_alpha
+ = cpu_to_le32((var->yres << 12) | var->xres);
+ /* fix me. AOI should not be greater than display size */
+ ad->aoi_size = cpu_to_le32(( var->yres << 16) | var->xres);
+ ad->offset_xyi = 0;
+ ad->offset_xyd = 0;
+
+ /* Disable chroma keying function */
+ ad->ckmax_r = 0;
+ ad->ckmax_g = 0;
+ ad->ckmax_b = 0;
+
+ ad->ckmin_r = 255;
+ ad->ckmin_g = 255;
+ ad->ckmin_b = 255;
+
+ gamma_table_base = gamma.paddr;
+ DPRINTF("gamma_table_base is allocated @ 0x%x\n",
+ (unsigned int)gamma_table_base);
+
+ /* Prep for DIU init - gamma table */
+
+ for (i = 0; i <= 2; i++)
+ for (j = 0; j <= 255; j++)
+ *gamma_table_base++ = j;
+
+ if (gamma_fix == 1) { /* fix the gamma */
+ DPRINTF("Fix gamma table\n");
+ gamma_table_base = gamma.paddr;
+ for (i = 0; i < 256*3; i++) {
+ gamma_table_base[i] = (gamma_table_base[i] << 2)
+ | ((gamma_table_base[i] >> 6) & 0x03);
+ }
+ }
+
+ DPRINTF("update-lcdc: HW - %p\n Disabling DIU\n", hw);
+
+ /* Program DIU registers */
+
+ hw->gamma = (unsigned int) gamma.paddr;
+ hw->cursor= (unsigned int) cursor.paddr;
+ hw->bgnd = 0x007F7F7F; /* BGND */
+ hw->bgnd_wb = 0; /* BGND_WB */
+ hw->disp_size = var->yres << 16 | var->xres; /* DISP SIZE */
+ hw->wb_size = 0; /* WB SIZE */
+ hw->wb_mem_addr = 0; /* WB MEM ADDR */
+ hw->hsyn_para = var->left_margin << 22 | /* BP_H */
+ var->hsync_len << 11 | /* PW_H */
+ var->right_margin; /* FP_H */
+ hw->vsyn_para = var->upper_margin << 22 | /* BP_V */
+ var->vsync_len << 11 | /* PW_V */
+ var->lower_margin; /* FP_V */
+
+ /* Pixel Clock configuration */
+ DPRINTF("DIU: Bus Frequency = %d\n", get_busfreq());
+ speed_ccb = get_busfreq();
+
+ DPRINTF("DIU pixclock in ps - %d\n", var->pixclock);
+ temp = 1;
+ temp *= 1000000000;
+ temp /= var->pixclock;
+ temp *= 1000;
+ pixval = speed_ccb / temp;
+ DPRINTF("DIU pixval = %lu\n", pixval);
+
+ hw->syn_pol = 0; /* SYNC SIGNALS POLARITY */
+ hw->thresholds = 0x00037800; /* The Thresholds */
+ hw->int_status = 0; /* INTERRUPT STATUS */
+ hw->int_mask = 0; /* INT MASK */
+ hw->plut = 0x01F5F666;
+
+ /* Modify PXCLK in GUTS CLKDVDR */
+ DPRINTF("DIU: Current value of CLKDVDR = 0x%08x\n", *guts_clkdvdr);
+ temp = *guts_clkdvdr & 0x2000FFFF;
+ *guts_clkdvdr = temp; /* turn off clock */
+ *guts_clkdvdr = temp | 0x80000000 | ((pixval & 0x1F) << 16);
+ DPRINTF("DIU: Modified value of CLKDVDR = 0x%08x\n", *guts_clkdvdr);
+
+ fb_initialized = 1;
+
+ if (splash_bmp) {
+ info->logo_height = fsl_diu_display_bmp(splash_bmp, 0, 0, 0);
+ info->logo_size = info->logo_height * info->line_length;
+ DPRINTF("logo height %d, logo_size 0x%x\n",
+ info->logo_height,info->logo_size);
+ }
+
+ /* Enable the DIU */
+ fsl_diu_enable_panel(info);
+ enable_lcdc();
+
+ return 0;
+}
+
+char *fsl_fb_open(struct fb_info **info)
+{
+ *info = &fsl_fb_info;
+ return (char *) ((unsigned int)(*info)->screen_base
+ + (*info)->logo_size);
+}
+
+void fsl_diu_close(void)
+{
+ struct fb_info *info = &fsl_fb_info;
+ fsl_diu_disable_panel(info);
+}
+
+static int fsl_diu_enable_panel(struct fb_info *info)
+{
+ struct diu *hw = dr.diu_reg;
+ struct diu_ad *ad = &fsl_diu_fb_ad;
+
+ DPRINTF("Entered: enable_panel\n");
+ if (hw->desc[0] != (unsigned int)ad)
+ hw->desc[0] = (unsigned int)ad;
+ DPRINTF("desc[0] = 0x%x\n", hw->desc[0]);
+ return 0;
+}
+
+static int fsl_diu_disable_panel(struct fb_info *info)
+{
+ struct diu *hw = dr.diu_reg;
+
+ DPRINTF("Entered: disable_panel\n");
+ if (hw->desc[0] != (unsigned int)&dummy_ad)
+ hw->desc[0] = (unsigned int)&dummy_ad;
+ return 0;
+}
+
+static int map_video_memory(struct fb_info *info, unsigned long bytes_align)
+{
+ unsigned long offset;
+ unsigned long mask;
+
+ DPRINTF("Entered: map_video_memory\n");
+ /* allocate maximum 1280*1024 with 32bpp */
+ info->smem_len = 1280 * 4 *1024 + bytes_align;
+ DPRINTF("MAP_VIDEO_MEMORY: smem_len = %d\n", info->smem_len);
+ info->screen_base = malloc(info->smem_len);
+ if (info->screen_base == NULL) {
+ printf("Unable to allocate fb memory\n");
+ return -1;
+ }
+ info->smem_start = (unsigned int) info->screen_base;
+ mask = bytes_align - 1;
+ offset = (unsigned long)info->screen_base & mask;
+ if (offset) {
+ info->screen_base += offset;
+ info->smem_len = info->smem_len - (bytes_align - offset);
+ } else
+ info->smem_len = info->smem_len - bytes_align;
+
+ info->screen_size = info->smem_len;
+
+ DPRINTF("Allocated fb @ 0x%08lx, size=%d.\n",
+ info->smem_start, info->smem_len);
+
+ return 0;
+}
+
+static void enable_lcdc(void)
+{
+ struct diu *hw = dr.diu_reg;
+
+ DPRINTF("Entered: enable_lcdc, fb_enabled = %d\n", fb_enabled);
+ if (!fb_enabled) {
+ hw->diu_mode = dr.mode;
+ fb_enabled++;
+ }
+ DPRINTF("diu_mode = %d\n", hw->diu_mode);
+}
+
+static void disable_lcdc(void)
+{
+ struct diu *hw = dr.diu_reg;
+
+ DPRINTF("Entered: disable_lcdc, fb_enabled = %d\n", fb_enabled);
+ if (fb_enabled) {
+ hw->diu_mode = 0;
+ fb_enabled = 0;
+ }
+}
+
+static u32 get_busfreq(void)
+{
+ u32 fs_busfreq = 0;
+
+ fs_busfreq = get_bus_freq(0);
+ return fs_busfreq;
+}
+
+/*
+ * Align to 64-bit(8-byte), 32-byte, etc.
+ */
+static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
+{
+ u32 offset, ssize;
+ u32 mask;
+
+ DPRINTF("Entered: allocate_buf\n");
+ ssize = size + bytes_align;
+ buf->paddr = malloc(ssize);
+ if (!buf->paddr)
+ return -1;
+
+ memset(buf->paddr, 0, ssize);
+ mask = bytes_align - 1;
+ offset = (u32)buf->paddr & mask;
+ if (offset) {
+ buf->offset = bytes_align - offset;
+ buf->paddr = (unsigned char *) ((u32)buf->paddr + offset);
+ } else
+ buf->offset = 0;
+ return 0;
+}
+
+int fsl_diu_display_bmp(unsigned char *bmp,
+ int xoffset,
+ int yoffset,
+ int transpar)
+{
+ struct fb_info *info = &fsl_fb_info;
+ unsigned char r, g, b;
+ unsigned int *fb_t, val;
+ unsigned char *bitmap;
+ unsigned int palette[256];
+ int width, height, bpp, ncolors, raster, offset, x, y, i, k, cpp;
+
+ if (!bmp) {
+ printf("Must supply a bitmap address\n");
+ return 0;
+ }
+
+ raster = bmp[10] + (bmp[11] << 8) + (bmp[12] << 16) + (bmp[13] << 24);
+ width = (bmp[21] << 24) | (bmp[20] << 16) | (bmp[19] << 8) | bmp[18];
+ height = (bmp[25] << 24) | (bmp[24] << 16) | (bmp[23] << 8) | bmp[22];
+ bpp = (bmp[29] << 8) | (bmp[28]);
+ ncolors = bmp[46] + (bmp[47] << 8) + (bmp[48] << 16) + (bmp[49] << 24);
+ bitmap = bmp + raster;
+ cpp = info->var.bits_per_pixel / 8;
+
+ DPRINTF("bmp = 0x%08x\n", (unsigned int)bmp);
+ DPRINTF("bitmap = 0x%08x\n", (unsigned int)bitmap);
+ DPRINTF("width = %d\n", width);
+ DPRINTF("height = %d\n", height);
+ DPRINTF("bpp = %d\n", bpp);
+ DPRINTF("ncolors = %d\n", ncolors);
+
+ DPRINTF("xres = %d\n", info->var.xres);
+ DPRINTF("yres = %d\n", info->var.yres);
+ DPRINTF("Screen_base = 0x%x\n", (unsigned int)info->screen_base);
+
+ if (((width+xoffset) > info->var.xres) ||
+ ((height+yoffset) > info->var.yres)) {
+ printf("bitmap is out of range, image too large or too much offset\n");
+ return 0;
+ }
+ if (bpp < 24) {
+ for (i = 0, offset = 54; i < ncolors; i++, offset += 4)
+ palette[i] = (bmp[offset+2] << 16)
+ + (bmp[offset+1] << 8) + bmp[offset];
+ }
+
+ switch (bpp) {
+ case 1:
+ for (y = height - 1; y >= 0; y--) {
+ fb_t = (unsigned int *) ((unsigned int)info->screen_base + (((y+yoffset) * info->var.xres) + xoffset)*cpp);
+ for (x = 0; x < width; x += 8) {
+ b = *bitmap++;
+ for (k = 0; k < 8; k++) {
+ if (b & 0x80)
+ *fb_t = palette[1];
+ else
+ *fb_t = palette[0];
+ b = b << 1;
+ }
+ }
+ for (i = (width / 2) % 4; i > 0; i--)
+ bitmap++;
+ }
+ break;
+ case 4:
+ for (y = height - 1; y >= 0; y--) {
+ fb_t = (unsigned int *) ((unsigned int)info->screen_base + (((y+yoffset) * info->var.xres) + xoffset)*cpp);
+ for (x = 0; x < width; x += 2) {
+ b = *bitmap++;
+ r = (b >> 4) & 0x0F;
+ g = b & 0x0F;
+ *fb_t++ = palette[r];
+ *fb_t++ = palette[g];
+ }
+ for (i = (width / 2) % 4; i > 0; i--)
+ bitmap++;
+ }
+ break;
+ case 8:
+ for (y = height - 1; y >= 0; y--) {
+ fb_t = (unsigned int *) ((unsigned int)info->screen_base + (((y+yoffset) * info->var.xres) + xoffset)*cpp);
+ for (x = 0; x < width; x++) {
+ *fb_t++ = palette[ *bitmap++ ];
+ }
+ for (i = (width / 2) % 4; i > 0; i--)
+ bitmap++;
+ }
+ break;
+ case 24:
+ for (y = height - 1; y >= 0; y--) {
+ fb_t = (unsigned int *) ((unsigned int)info->screen_base + (((y+yoffset) * info->var.xres) + xoffset)*cpp);
+ for (x = 0; x < width; x++) {
+ b = *bitmap++;
+ g = *bitmap++;
+ r = *bitmap++;
+ val = (r << 16) + (g << 8) + b;
+ *fb_t++ = val;
+ }
+ for (; (x % 4) != 0; x++) /* 4-byte alignment */
+ bitmap++;
+ }
+ break;
+ }
+
+ return height;
+}
+
+void fsl_diu_clear_screen(void)
+{
+ struct fb_info *info = &fsl_fb_info;
+
+ memset(info->screen_base, 0, info->smem_len);
+}
+#endif /* CONFIG_FSL_DIU_FB */
--- /dev/null
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * York Sun <yorksun@freescale.com>
+ *
+ * FSL DIU Framebuffer driver
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+struct fb_var_screeninfo {
+ unsigned int xres; /* visible resolution */
+ unsigned int yres;
+
+ unsigned int bits_per_pixel; /* guess what */
+
+ /* Timing: All values in pixclocks, except pixclock (of course) */
+ unsigned int pixclock; /* pixel clock in ps (pico seconds) */
+ unsigned int left_margin; /* time from sync to picture */
+ unsigned int right_margin; /* time from picture to sync */
+ unsigned int upper_margin; /* time from sync to picture */
+ unsigned int lower_margin;
+ unsigned int hsync_len; /* length of horizontal sync */
+ unsigned int vsync_len; /* length of vertical sync */
+ unsigned int sync; /* see FB_SYNC_* */
+ unsigned int vmode; /* see FB_VMODE_* */
+ unsigned int rotate; /* angle we rotate counter clockwise */
+};
+
+struct fb_info {
+ struct fb_var_screeninfo var; /* Current var */
+ unsigned long smem_start; /* Start of frame buffer mem */
+ /* (physical address) */
+ unsigned int smem_len; /* Length of frame buffer mem */
+ unsigned int type; /* see FB_TYPE_* */
+ unsigned int line_length; /* length of a line in bytes */
+
+ char *screen_base;
+ unsigned long screen_size;
+ int logo_height;
+ unsigned int logo_size;
+};
+
+
+extern char *fsl_fb_open(struct fb_info **info);
+extern int fsl_diu_init(int xres,
+ unsigned int pixel_format,
+ int gamma_fix,
+ unsigned char *splash_bmp);
+extern void fsl_diu_clear_screen(void);
+extern int fsl_diu_display_bmp(unsigned char *bmp,
+ int xoffset,
+ int yoffset,
+ int transpar);
--- /dev/null
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * York Sun <yorksun@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*---------------------------------------------------------------------------
+ * FSL_Logo_BMP --
+ *
+ * A 340x128x4bpp BMP logo.
+ *---------------------------------------------------------------------------
+ */
+unsigned int FSL_Logo_BMP[] = {
+0x424d765c,
+0x00000000,0x00007600,0x00002800,0x00006c01,0x00008000,0x00000100,0x04000000,
+0x0000005c,0x0000130b,0x0000130b,0x00001000,0x00000000,0x00000402,0x04000d91,
+0xbc000b51,0x67001536,0x9a000f2a,0x4b005050,0x50009090,0x90000c70,0x92002e2f,
+0x2e00cfcf,0xcf007c82,0x7c00fbfd,0xfb006f70,0x6f00b0b0,0xb00004bd,0xfa000542,
+0xf9000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0xa9996500,0x0000a999,
+0xa80000aa,0x400006a0,0x00086500,0x86500008,0x699da800,0x0000c999,0x68000056,
+0x5000006a,0x00000a99,0x9a0c6800,0x08699685,0xa5000086,0x99dc4000,0x05999800,
+0x08699dc0,0x0000a600,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0000008b,0xbb99bbd4,0x004bbb99,0xbba0009b,0x50000bb4,0x0008b900,
+0x5b90005b,0xbb99bbc0,0x0009bb99,0xbb60005b,0xd00000bb,0x0004bbbb,0xbbb9ba00,
+0x4bbbbbbd,0xbd000cbb,0xb9bbb500,0x0cbbba00,0x5bbb9bbb,0x5000db50,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0000006b,0x980006bd,
+0x006b9800,0x89ba006b,0x600009b5,0x0000bb00,0x4bb000bb,0xd00059bc,0x006b9800,
+0x89bd008b,0xb00000db,0x5006bb50,0x089bbd00,0x5bbc086b,0xb9000bb6,0x00059b50,
+0x0cbd0000,0xbb6000c9,0xb500dba0,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0000009b,0xa00008bb,0x80bb5000,0x00bb805b,0xd00006ba,
+0x00009b50,0x09b405bb,0x000008bb,0x409bc000,0x049bc009,0xb000006b,0xa009b600,
+0x0009b900,0x5b900005,0xbb005bb0,0x00005bb0,0x08b90005,0xbb00000c,0xb900cbd0,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0000005c,
+0x800008bb,0x80bb8000,0x0088008b,0x90000cbd,0x0000dbc0,0x0db505b9,0x0000006d,
+0x50bb8000,0x005b9009,0xb50000cb,0xd00bb500,0x0008bb00,0x8b900000,0x9b50cb90,
+0x000006d5,0x00bb000c,0xbd000000,0x9bc08b90,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00ca9bbb,0x00bb5585,0x8558500b,
+0xb00008b9,0x0000cbd0,0x06ba05bb,0x00000000,0x00bb5000,0x000bb806,0xba00008b,
+0x9009b500,0x00009b50,0x0bb00000,0xdbc05b90,0x00000000,0x009b500c,0xb9000000,
+0xcb900bb0,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0xdbbbbb68,0x009bbbbb,0xbbbbb009,0xb50000bb,0x00008b90,0x05b900bb,
+0x40000000,0x009bc000,0x0009bc0c,0xbd00000b,0xb009ba00,0x00006bc0,0x09b50000,
+0xcb608bb0,0x00000000,0x00dbc008,0xbb000000,0x8bb009b8,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000005,0xbb9c8000,0x00cb9555,
+0xc55bb406,0xba00009b,0x50000bb0,0x08bb009b,0xc0000000,0x00abd000,0x000dbc08,
+0xbb00000d,0xb50cb900,0x0000abd0,0x0dbc0000,0x8b9009b5,0x00000000,0x00cbd000,
+0xbb500000,0x8bb006b6,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0000000c,0xbd000059,0xa08bb800,0x008bb00c,0xb90000db,0xa00009b8,
+0x009b40cb,0x90000089,0x900bb800,0x0009bc00,0xbb50000d,0xbc00bb50,0x0000db90,
+0x0cb60000,0x0bb00cb9,0x00000899,0x008b9000,0xab900000,0x8bb00cbb,0x80000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000008,0xb90000ab,
+0x900ab940,0x00ab9008,0xbb60009b,0xbc000bb8,0x009b5009,0xbd00006b,0xb00cbb80,
+0x005bb800,0xdb950009,0xba00cbb5,0x0005bbb0,0x08b90000,0x09b8009b,0xd00006b9,
+0x000bb000,0x09bd0000,0xdb9005bb,0x9c880000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0xdb96cdbb,0xc000db96,0xcdbbc000,0xbbb999bb,
+0x6b9dbbb4,0x006bc000,0x9b96cdbb,0xc0006bb6,0xc69bd000,0x6bbb9dbb,0xb50006bb,
+0x96db9bb8,0x00bb0000,0x0dbc0049,0xb9acdbbc,0x069bb995,0x089b9aad,0xbb5000bb,
+0xdbbb0000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x059bbb9c,0x00000c9b,0xbbbc0000,0xd98dbbb6,0x059bbb50,0x00596000,0x0c9bbb9c,
+0x0000089b,0xbbb60000,0xc96c9bbb,0x6000005d,0xbbb9cdbc,0x00998000,0x0c960000,
+0xa9bbb9c0,0x0a9bbb9a,0x000a9bbb,0x950000d9,0x8c9b5000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00008400,0x00000000,0x84000000,
+0x00004800,0x00048000,0x00000000,0x00048800,0x00000000,0x88000000,0x00000880,
+0x00000000,0x08800cb6,0x00000000,0x00000000,0x00488000,0x000ab600,0x00000488,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x000005b9,0x00000000,
+0x00000000,0x00000000,0x0005b900,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x000000bb,0x00000000,0x00000000,0x00000000,0x0000bb00,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x000a9c00,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0000009b,
+0x80000000,0x00000000,0x00000000,0x0000cc00,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x000cbd00,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x000000db,0x50000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0004c500,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x0000005c,0x50000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x008a66d6,0x6a580000,0x00000000,0x00000000,0x000008c6,
+0xd6d6a580,0x00000000,0x00000000,0x000008ca,0x6d6d6a58,0x00000000,0x00000000,
+0x00000004,0x5a6d6da5,0x80000000,0x00000000,0x00008c6d,0x66c50000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x005cad6d,0x6a580000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00033400,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000009,
+0x99d9999d,0x50000000,0x00a999d9,0x99960000,0x00000000,0x00000008,0xdbbbbbbb,
+0xbbbb9650,0x00000000,0x00000000,0x008dbbbb,0xbbbbbbb9,0x65000000,0x00000000,
+0x005dbbbb,0xbbbbbbbb,0x96800000,0x00000000,0x00000c9b,0xbbbbbbbb,0xb9640000,
+0x00000000,0x00c9bbbb,0xbbbbbd80,0x00c999d9,0x99980000,0x06999d99,0x99600000,
+0x00000008,0x6bbbbbbb,0xbbbb9d50,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x04ffff30,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000009,0xbbbbbbbb,0xd0000000,0x00cbbbbb,
+0xbbbb0000,0x00000000,0x000004db,0xbbbbbbbb,0xbbbbbbb9,0x50000000,0x00000000,
+0x06bbbbbb,0xbbbbbbbb,0xbb950000,0x00000000,0x59bbbbbb,0xbbbbbbbb,0xbbb95000,
+0x00000000,0x00059bbb,0xbbbbbbbb,0xbbbb6800,0x00000000,0x89bbbbbb,0xbbbbbbb9,
+0x806bbbbb,0xbbb40000,0x0abbbbbb,0xbbb00000,0x0000006b,0xbbbbbbbb,0xbbbbbbb9,
+0x50000000,0x00000000,0x00000000,0x00000000,0x00000004,0xffffffff,0x40000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x0000000d,0xbbbbbbbb,0x90000000,0x005bbbbb,0xbbbb8000,0x00000000,0x000089bb,
+0xbbbbbbbb,0xbbbbbbbb,0xbd800000,0x00000008,0x9bbbbbbb,0xbbbbbbbb,0xbbbb9800,
+0x0000000d,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbd00,0x00000000,0x00cbbbbb,0xbbbbbbbb,
+0xbbbbbbc0,0x00000000,0xdbbbbbbb,0xbbbbbbbb,0xba6bbbbb,0xbbb80000,0x05bbbbbb,
+0xbbb40000,0x000009bb,0xbbbbbbbb,0xbbbbbbbb,0xb9800000,0x00000000,0x00000000,
+0x00000000,0x000004ff,0xffffffff,0xf3400000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x0000000a,0xbbbbbbbb,0xb0000000,
+0x008bbbbb,0xbbbbc000,0x00000000,0x0000bbbb,0xbbbbbbbb,0xbbbbbbbb,0xbb950000,
+0x00000009,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbc0,0x0000089b,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbb98,0x00000000,0x0abbbbbb,0xbbbbbbbb,0xbbbbbbbd,0x4000000c,0xbbbbbbbb,
+0xbbbbbbbb,0xbb9bbbbb,0xbbb80000,0x08bbbbbb,0xbbb50000,0x00049bbb,0xbbbbbbbb,
+0xbbbbbbbb,0xbbbc0000,0x00000000,0x00000000,0x00000000,0x0004ffff,0xffffffff,
+0xfff30000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000005,0xbbbbbbbb,0xb8000000,0x0009bbbb,0xbbbb6000,0x00000000,
+0x0009bbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbc000,0x000000db,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbbb6,0x000089bb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0x80000000,0x8bbbbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0x95000009,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbb50000,
+0x00bbbbbb,0xbbb60000,0x0006bbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbba000,0x00000000,
+0x00000000,0x00000000,0x043fffff,0xffffffff,0xfffff400,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0xbbbbbbbb,
+0xbc000000,0x000dbbbb,0xbbbb9000,0x00000000,0x005bbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbc00,0x000008bb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0x60009bbb,0xbbbbbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0x90000000,0x9bbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbb80000b,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbc0000,0x009bbbbb,0xbbbd0000,0x008bbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbbd00,0x00000000,0x00000000,0x00000000,0x003fffff,
+0xffffffff,0xfffffff0,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0xbbbbbbbb,0xb6000000,0x000abbbb,0xbbbbb000,
+0x00000000,0x009bbbbb,0xbbbbbb65,0x5569bbbb,0xbbbbbbc0,0x00000dbb,0xbbbbbbbb,
+0xb6c5569b,0xbbbbbbbb,0xba08bbbb,0xbbbbbbbb,0x96c55c6b,0xbbbbbbbb,0xb6000005,
+0xbbbbbbbb,0xbbbbbddd,0x9bbbbbbb,0xbbb8004b,0xbbbbbbbb,0xb9655cdb,0xbbbbbbbb,
+0xbbbd0000,0x006bbbbb,0xbbbb0000,0x00dbbbbb,0xbbbbbbdc,0x8c69bbbb,0xbbbbbbc0,
+0x00000000,0x00000000,0x00000000,0x0004ffff,0xffffffff,0xffffffff,0x30000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0xdbbbbbbb,0xb9000000,0x0005bbbb,0xbbbbb800,0x00000000,0x00bbbbbb,0xbbbbd000,
+0x0000cbbb,0xbbbbbbb8,0x00000bbb,0xbbbbbbb9,0x0000000c,0xbbbbbbbb,0xbb5006bb,
+0xbbbbbbd8,0x00000000,0x6bbbbbbb,0xbb400006,0xbbbbbbbb,0xbbb50000,0x08dbbbbb,
+0xbbb9000b,0xbbbbbbbb,0x94000008,0xdbbbbbbb,0xbbb90000,0x00cbbbbb,0xbbbb4000,
+0x00bbbbbb,0xbbbbd400,0x0000cbbb,0xbbbbbbb5,0x00000000,0x00000000,0x00000000,
+0x000004ff,0xffffffff,0xffffffff,0xff400000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x6bbbbbbb,0xbb000000,0x0008bbbb,
+0xbbbbb500,0x00000000,0x0cbbbbbb,0xbbb90000,0x000008bb,0xbbbbbb95,0x00008bbb,
+0xbbbbbb98,0x00000000,0x49bbbbbb,0xbbc0008d,0xbbbbb500,0x00000000,0x0dbbbbbb,
+0xbbc0000b,0xbbbbbbbb,0xbb800000,0x0005bbbb,0xbb98000b,0xbbbbbbbb,0xc0000000,
+0x06bbbbbb,0xbbbb0000,0x008bbbbb,0xbbbb5000,0x08bbbbbb,0xbbb98000,0x0000089b,
+0xbbbbbbbc,0x00000000,0x00000000,0x00000000,0x00000043,0xffffffff,0xffffffff,
+0xfff34000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x5bbbbbbb,0xbb800000,0x0000bbbb,0xbbbbb600,0x00000000,0x0abbbbbb,
+0xbbb50000,0x00000009,0xbbbbbc00,0x0000cbbb,0xbbbbbbc0,0x00000000,0x089bbbbb,
+0xa0000000,0xc9bb8000,0x00000000,0x05bbbbbb,0xbb90000b,0xbbbbbbbb,0xbc000000,
+0x00005bbb,0x95000009,0xbbbbbbbb,0x50000000,0x009bbbbb,0xbbbb5000,0x000bbbbb,
+0xbbbba000,0x0cbbbbbb,0xbbbc0000,0x00000049,0xbbbbba00,0x00000000,0x00000000,
+0x00000000,0x00000000,0x4fffffff,0xffffffff,0xfffff300,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x8bbbbbbb,0xbb500000,
+0x0000dbbb,0xbbbbb900,0x00000000,0x06bbbbbb,0xbbb00000,0x00000004,0xbbbc0000,
+0x0000abbb,0xbbbbbb40,0x00000000,0x0089bba0,0x00000000,0x00680000,0x00000000,
+0x0abbbbbb,0xbbb0008b,0xbbbbbbbb,0xb8000000,0x00000695,0x0000000c,0xbbbbbbbb,
+0xd0000000,0x008bbbbb,0xbbbbc000,0x0009bbbb,0xbbbbd000,0x0cbbbbbb,0xbbb40000,
+0x00000008,0x9bb60000,0x00000000,0x00000000,0x00000000,0x00000000,0x003fffff,
+0xffffffff,0xffff3400,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0bbbbbbb,0xbb600000,0x00006bbb,0xbbbbb900,0x00000000,
+0x0dbbbbbb,0xbb900000,0x00000000,0x8c000000,0x00006bbb,0xbbbbbb00,0x00000000,
+0x0008a400,0x00000000,0x00000000,0x00000008,0x6bbbbbbb,0xbbb5005b,0xbbbbbbbb,
+0x90000000,0x00000000,0x00000008,0xbbbbbbbb,0xb8000000,0x000dbbbb,0xbbbb6000,
+0x000dbbbb,0xbbbb9000,0x0abbbbbb,0xbbb00000,0x00000000,0x06000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00003fff,0xffffffff,0xfff40000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0dbbbbbb,
+0xbbd00000,0x00005bbb,0xbbbbbb80,0x00000000,0x06bbbbbb,0xbb900000,0x00000000,
+0x00000000,0x0000abbb,0xbbbbbb00,0x00000000,0x00000000,0x00000000,0x00000000,
+0x0005ad9b,0xbbbbbbbb,0xbbb5008b,0xbbbbbbbb,0x90000000,0x00000000,0x00000000,
+0xdbbbbbbb,0xb9500000,0x000cbbbb,0xbbbb9000,0x000cbbbb,0xbbbbb400,0x0cbbbbbb,
+0xbbb00000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x000004ff,0xffffffff,0xf4000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x06bbbbbb,0xbbb00000,0x00008bbb,0xbbbbbb50,
+0x00000000,0x06bbbbbb,0xbbb00000,0x00000000,0x00000000,0x0000cbbb,0xbbbbbb00,
+0x00000000,0x00000000,0x00000000,0x00000045,0xd9bbbbbb,0xbbbbbbbb,0xbbb5008b,
+0xbbbbbbbb,0x90000000,0x00000000,0x00000000,0x0bbbbbbb,0xbbb95400,0x0004bbbb,
+0xbbbbb000,0x0008bbbb,0xbbbbb800,0x0cbbbbbb,0xbbb00000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000004,0xfffffff4,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x0cbbbbbb,0xbbb80000,0x00000bbb,0xbbbbbb60,0x00000000,0x0cbbbbbb,0xbbbddddd,
+0xdddddddd,0xdddddddd,0xd8005bbb,0xbbbbbbdd,0xdddddddd,0xdddddddd,0xdddd8000,
+0x00008dbb,0xbbbbbbbb,0xbbbbbbbb,0xbbb4000b,0xbbbbbbbb,0x90000000,0x00000000,
+0x00000000,0x05bbbbbb,0xbbbbbb96,0x5000bbbb,0xbbbbb800,0x0000bbbb,0xbbbbba00,
+0x05bbbbbb,0xbbb9dddd,0xdddddddd,0xdddddddd,0xd8000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x43fff400,0x00000000,0x0007e140,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x08bbbbbb,0xbbb50000,0x000009bb,
+0xbbbbbbd0,0x00000000,0x08bbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xb8004bbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbc000,0x0006bbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbd0000b,0xbbbbbbbb,0xb0000000,0x00000000,0x00000000,0x00cbbbbb,0xbbbbbbbb,
+0xbb9c9bbb,0xbbbbbc00,0x00009bbb,0xbbbbbd00,0x00bbbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbbbb,0xbc000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00440000,
+0x00000000,0x07eeeee2,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00bbbbbb,0xbbba0000,0x000006bb,0xbbbbbbb0,0x00000000,0x00bbbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbc000bbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbb6000,0x00dbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xb980000d,0xbbbbbbbb,0xb0000000,
+0x00000000,0x00000000,0x00089bbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbb600,0x0000dbbb,
+0xbbbbb900,0x00bbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xb6000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000002,0xeeeeeeee,0x12000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x009bbbbb,0xbbbd0000,
+0x00000cbb,0xbbbbbbb0,0x00000000,0x009bbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xb6000dbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbb6000,0x0cbbbbbb,0xbbbbbbbb,
+0xbbbbbbbb,0x94000006,0xbbbbbbbb,0xbc000000,0x00000000,0x00000000,0x00000cbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbb900,0x0000cbbb,0xbbbbbb00,0x006bbbbb,0xbbbbbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0xb6000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x000002ee,0xeeeeeeee,0xee140000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x006bbbbb,0xbbb90000,0x000008bb,0xbbbbbbb5,0x00000000,
+0x00abbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xb60005bb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbbbb,0xbbbb9000,0x09bbbbbb,0xbbbbbbbb,0xbbbbbb9c,0x00000008,0xbbbbbbbb,
+0xbd000000,0x00000000,0x00000000,0x00000005,0x9bbbbbbb,0xbbbbbbbb,0xbbbbbb00,
+0x00005bbb,0xbbbbbb80,0x00cbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xb9000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0002eeee,0xeeeeeeee,
+0xeeee7000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00cbbbbb,
+0xbbbb8000,0x000000bb,0xbbbbbbb6,0x00000000,0x008bbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbbbb,0xb60008bb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbd000,0x0bbbbbbb,
+0xbbbbbbbb,0xbbb96800,0x00000000,0xbbbbbbbb,0xbb000000,0x00000000,0x00000000,
+0x00000000,0x00cd9bbb,0xbbbbbbbb,0xbbbbbb80,0x00000bbb,0xbbbbbbc0,0x000bbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0xbd000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x001eeeee,0xeeeeeeee,0xeeeeee40,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x008bbbbb,0xbbbb5000,0x0000009b,0xbbbbbbbb,
+0x00000000,0x0009bbbb,0xbbbb5888,0x88888888,0xcbbbbbbb,0xbd0000db,0xbbbbbbbc,
+0x88888888,0x8885bbbb,0xbbbb9000,0x0bbbbbbb,0xbbbbbb96,0xc8000000,0x00000000,
+0x6bbbbbbb,0xbbc00000,0x00000000,0x00000000,0x00000000,0x0000045c,0x69bbbbbb,
+0xbbbbbbc0,0x000009bb,0xbbbbbb60,0x000dbbbb,0xbbbbc888,0x88888888,0x5bbbbbbb,
+0xb9000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0047eeee,
+0xeeeeeeee,0xeeeeeee1,0x40000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x000bbbbb,0xbbbba000,0x000000db,0xbbbbbbbb,0xd0000000,0x000cbbbb,0xbbbb6000,
+0x00000000,0x8bbbbbbb,0xb600005b,0xbbbbbbbd,0x00000000,0x0008bbbb,0xbbbbd000,
+0x0bbbbbbb,0xbbb9c000,0x00000000,0x00000000,0x8bbbbbbb,0xbb900000,0x0000000d,
+0x50000000,0x00000000,0x00000000,0x00008dbb,0xbbbbbb60,0x00000dbb,0xbbbbbb90,
+0x0005bbbb,0xbbbbd000,0x00000000,0x8bbbbbbb,0xbd000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x000041ee,0xeeeeeeee,0xeeeeeeee,0xe2000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x0009bbbb,0xbbbbd000,0x000000cb,
+0xbbbbbbbb,0xb9500000,0x00009bbb,0xbbbbb800,0x00000000,0x5bbbbbbb,0xb6000009,
+0xbbbbbbbb,0x50000000,0x0008bbbb,0xbbbbd000,0x0dbbbbbb,0xbb980000,0x00000000,
+0x00000000,0x06bbbbbb,0xbbbd0000,0x0000004b,0xb9800000,0x00000000,0x00000000,
+0x00000cbb,0xbbbbbbd0,0x00000abb,0xbbbbbbb0,0x00009bbb,0xbbbbb500,0x00000000,
+0x8bbbbbbb,0xbd000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00043000,
+0x0000002e,0xeeeeeeee,0xeeeeeeee,0xee120000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x000dbbbb,0xbbbb9000,0x0000008b,0xbbbbbbbb,0xbbb9da58,0x0000cbbb,
+0xbbbbb980,0x00000000,0xdbbbbbbb,0xbc000005,0xbbbbbbbb,0xb0000000,0x0006bbbb,
+0xbbbba000,0x0cbbbbbb,0xbbd00000,0x000000cb,0x50000000,0x08bbbbbb,0xbbbb5000,
+0x0000006b,0xbbb60000,0x0006bbbb,0xbbbb6000,0x000008bb,0xbbbbbbb0,0x000005bb,
+0xbbbbbbb8,0x00005bbb,0xbbbbb980,0x00000000,0x6bbbbbbb,0xba000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x043fff30,0x00000000,0x1eeeeeee,0xeeeeeeee,
+0xeeee1400,0x00000000,0x00000000,0x00000000,0x00000000,0x000cbbbb,0xbbbbb000,
+0x0000000b,0xbbbbbbbb,0xbbbbbbbb,0xb50009bb,0xbbbbbb98,0x00000005,0xbbbbbbbb,
+0xb8000000,0xdbbbbbbb,0xbb800000,0x005bbbbb,0xbbbb5000,0x04bbbbbb,0xbbb00000,
+0x000006bb,0xbd800000,0x00cbbbbb,0xbbbbb600,0x00000cbb,0xbbbbb500,0x0005bbbb,
+0xbbbbb400,0x000000bb,0xbbbbbbb4,0x000004bb,0xbbbbbbbc,0x00000dbb,0xbbbbbb95,
+0x00000008,0xbbbbbbbb,0xb5000000,0x00000000,0x00000000,0x00000000,0x00000004,
+0x3fffffff,0x40000000,0x04eeeeee,0xeeeeeeee,0xeeeeee40,0x00000000,0x00000000,
+0x00000000,0x00000008,0x888cbbbb,0xbbbbbc88,0x88800009,0xbbbbbbbb,0xbbbbbbbb,
+0xba0008bb,0xbbbbbbbb,0x680008ab,0xbbbbbbbb,0x90000000,0x89bbbbbb,0xbbb68000,
+0x0cbbbbbb,0xbbbb0000,0x006bbbbb,0xbbb95000,0x0056bbbb,0xbbb60000,0x0009bbbb,
+0xbbbbbbb6,0x588c9bbb,0xbbbbbb90,0x0000bbbb,0xbbbbbd00,0x000005bb,0xbbbbbbb8,
+0x0000009b,0xbbbbbbb6,0x000000bb,0xbbbbbbbb,0x680000cb,0xbbbbbbbb,0xb0000000,
+0x00000000,0x00000000,0x00000000,0x0000043f,0xffffffff,0xf3000000,0x0002eeee,
+0xeeeeeeee,0xeeee7000,0x00000000,0x00000000,0x00000000,0x0000000b,0xbbbbbbbb,
+0xbbbbbbbb,0xbbb5000d,0xbbbbbbbb,0xbbbbbbbb,0xbd0000cb,0xbbbbbbbb,0xbb999bbb,
+0xbbbbbbbb,0x60000000,0x05bbbbbb,0xbbbbbb99,0xbbbbbbbb,0xbbbd0000,0x008bbbbb,
+0xbbbbbb99,0xbbbbbbbb,0xbbbb9c00,0x00009bbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbb90,
+0x0000cbbb,0xbbbbbb98,0x000089bb,0xbbbbbbb8,0x0000009b,0xbbbbbbb9,0x0000005b,
+0xbbbbbbbb,0xbbb99bbb,0xbbbbbbbb,0xd0000000,0x00000000,0x00000000,0x00000000,
+0x00003fff,0xffffffff,0xfff30000,0x000001ee,0xeeeeeeee,0xee140000,0x00000000,
+0x00000000,0x00000000,0x00000009,0xbbbbbbbb,0xbbbbbbbb,0xbbbc000a,0xbbbbbbbb,
+0xbbbbbbbb,0xb9000006,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,0x40000000,0x00abbbbb,
+0xbbbbbbbb,0xbbbbbbbb,0xbbb80000,0x0005bbbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbd0,
+0x00008bbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbb50,0x000009bb,0xbbbbbbbb,0x9d99bbbb,
+0xbbbbbbb0,0x0000006b,0xbbbbbbbb,0x00000005,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbbbb,
+0x80000000,0x00000000,0x00000000,0x00000000,0x003fffff,0xffffffff,0xfffff400,
+0x00000041,0xeeeeeeee,0x14000000,0x00000000,0x00000000,0x00000000,0x00000006,
+0xbbbbbbbb,0xbbbbbbbb,0xbbb60008,0xbbbbbbbb,0xbbbbbbbb,0xbb000000,0x6bbbbbbb,
+0xbbbbbbbb,0xbbbbbbbc,0x00000000,0x000abbbb,0xbbbbbbbb,0xbbbbbbbb,0xbb600000,
+0x00005bbb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbb50,0x0000049b,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbbbd00,0x000008bb,0xbbbbbbbb,0xbbbbbbbb,0xbbbbbb90,0x0000005b,0xbbbbbbbb,
+0x80000000,0x5bbbbbbb,0xbbbbbbbb,0xbbbbbbb6,0x00005050,0x50500000,0x00000000,
+0x00000000,0x04ffffff,0xffffffff,0xffffff30,0x00000000,0x2eeeee14,0x00000000,
+0x00004400,0x00000000,0x00000000,0x0000000c,0xbbbbbbbb,0xbbbbbbbb,0xbbb90000,
+0xbbbbbbbb,0xbdbbbbbb,0xbb500000,0x05bbbbbb,0xbbbbbbbb,0xbbbbbb90,0x00000000,
+0x00005bbb,0xbbbbbbbb,0xbbbbbbbb,0xb9000000,0x000005bb,0xbbbbbbbb,0xbbbbbbbb,
+0xbbbb9000,0x0000000d,0xbbbbbbbb,0xbbbbbbbb,0xbbbb9000,0x0000005b,0xbbbbbbbb,
+0xbbbbbbbb,0xbbbbbb50,0x0000008b,0xbbbbbbbb,0x50000000,0x05bbbbbb,0xbbbbbbbb,
+0xbbbbbb90,0x0008c068,0x98d00000,0x00000000,0x00000000,0x0004ffff,0xffffffff,
+0xffffffff,0x30000000,0x047e1400,0x00000000,0x0043ff34,0x00000000,0x00000000,
+0x00000008,0xbbbbbbbb,0xbbbbbbbb,0xbbbb0000,0x9bbbbbbb,0xb60a9bbb,0xbbc00000,
+0x008dbbbb,0xbbbbbbbb,0xbbbbbd00,0x00000000,0x000000db,0xbbbbbbbb,0xbbbbbbbb,
+0xd8000000,0x0000008d,0xbbbbbbbb,0xbbbbbbbb,0xbb950000,0x00000000,0x59bbbbbb,
+0xbbbbbbbb,0xbbbd0000,0x00000004,0xdbbbbbbb,0xbbbbbbbb,0xbbbbbc00,0x00000009,
+0xbbbbbbbb,0x60000000,0x000dbbbb,0xbbbbbbbb,0xbbbbbd00,0x0008a06a,0xccd00000,
+0x00000000,0x00000000,0x000003ff,0xffffffff,0xffffffff,0xff400000,0x00040000,
+0x00000000,0x03ffffff,0x30000000,0x00000000,0x00000000,0xdddddbbb,0xbbbbbb9d,
+0xdddd8000,0xdbbbbbbb,0xb90005db,0xbb600000,0x00005dbb,0xbbbbbbbb,0xbbb95000,
+0x00000000,0x00000008,0xdbbbbbbb,0xbbbbbb9c,0x00000000,0x00000000,0x59bbbbbb,
+0xbbbbbbbb,0x95000000,0x00000000,0x00c9bbbb,0xbbbbbbbb,0xb9500000,0x00000000,
+0x059bbbbb,0xbbbbbbbb,0xbbb95000,0x00000009,0xbbbbbbbb,0xd0000000,0x00008dbb,
+0xbbbbbbbb,0xbbb9a000,0x0008a0dd,0x06d00000,0x00000000,0x00000000,0x00000043,
+0xffffffff,0xffffffff,0xfff34000,0x00000000,0x00000043,0xffffffff,0xff400000,
+0x00000000,0x00000000,0x000009bb,0xbbbbbbd0,0x00000000,0x8c5555c5,0x55000000,
+0x85500000,0x0000008c,0xd9bbbbbb,0x9d500000,0x00000000,0x00000000,0x00cd9bbb,
+0xbbb9d500,0x00000000,0x00000000,0x004cd9bb,0xbbbb9dc0,0x00000000,0x00000000,
+0x00005cdb,0xbbbbbb9a,0x50000000,0x00000000,0x0008cdbb,0xbbbbbbb9,0xda800000,
+0x00000006,0xbbbbbbbb,0xb0000000,0x0000000c,0xd9bbbbbb,0x9dc00000,0x0086dc6c,
+0x0cd00000,0x00000000,0x00000000,0x00000000,0x4fffffff,0xffffffff,0xfffff300,
+0x00000000,0x000003ff,0xffffffff,0xffff0000,0x00000000,0x00000000,0x00000dbb,
+0xbbbbbb90,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00008840,
+0x00000000,0x00000000,0x00000000,0x00000008,0x84000000,0x00000000,0x00000000,
+0x00000000,0x88400000,0x00000000,0x00000000,0x00000000,0x08880000,0x00000000,
+0x00000000,0x00000000,0x08888000,0x00000000,0x0000000c,0xbbbbbbbb,0xb8000000,
+0x00000000,0x00008880,0x00000000,0x00888480,0x00800000,0x00000000,0x00000000,
+0x00000000,0x003fffff,0xffffffff,0xfffff400,0x00000000,0x0003ffff,0xffffffff,
+0xfffff300,0x00000000,0x00000000,0x00000abb,0xbbbbbbb8,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000008,0xbbbbbbbb,0xb5000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00043fff,0xffffffff,
+0xfff30000,0x00000000,0x003fffff,0xffffffff,0xfffffff4,0x00000000,0x00000000,
+0x000005bb,0xbbbbbbbb,0x58040000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0xbbbbbbbb,
+0xba000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x000004ff,0xffffffff,0xf3000000,0x00000000,0x00003fff,
+0xffffffff,0xffffffff,0x30000000,0x00000000,0x000000bb,0xbbbbbbbb,0xbbbbb500,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0xdbbbbbbb,0xbd000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000003,
+0xfffffff3,0x00000000,0x00000000,0x000004ff,0xffffffff,0xffffffff,0xff300000,
+0x00000000,0x000000db,0xbbbbbbbb,0xbbbbba00,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x6bbbbbbb,0xb9000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x43fff340,0x00000000,0x00021100,
+0x00000003,0xffffffff,0xffffffff,0xffff4000,0x00000000,0x0000008b,0xbbbbbbbb,
+0xbbbbbd00,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0xcbbbbbbb,0xbb800000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00430000,0x00000000,0x021eeee2,0x00000000,0x03ffffff,0xffffffff,
+0xfffff300,0x00000000,0x0000000d,0xbbbbbbbb,0xbbbbb900,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x8bbbbbbb,0xbb500000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000004,
+0x1eeeeeee,0x14000000,0x004fffff,0xffffffff,0xffffff30,0x00000000,0x00000000,
+0x9bbbbbbb,0xbbbbbb00,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0bbbbbbb,0xbba00000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x0000041e,0xeeeeeeee,0xee100000,0x00003fff,
+0xffffffff,0xffff3000,0x00000000,0x00000000,0x0dbbbbbb,0xbbbbbb50,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x09bbbbbb,0xbbd00000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00047eee,0xeeeeeeee,0xeeee2000,0x0000003f,0xffffffff,0xff300000,0x00000000,
+0x00000000,0x0059bbbb,0xbbbbbbc0,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x06bbbbbb,
+0xbb900000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x007eeeee,0xeeeeeeee,0xeeeee140,
+0x00000004,0xffffffff,0x30000000,0x00000000,0x00000000,0x00004c66,0xd66a5800,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00808480,0x84800000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0041eeee,0xeeeeeeee,0xeeeeeee7,0x00000000,0x03ffff34,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00002eee,0xeeeeeeee,
+0xeeeeeeee,0xe2000000,0x004f3400,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0000007e,0xeeeeeeee,0xeeeeeeee,0xee140000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000004,
+0x1eeeeeee,0xeeeeeeee,0xeeee7000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x02eeeeee,0xeeeeeeee,0xeeeeee40,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0007eeee,0xeeeeeeee,0xeeeee400,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x000041ee,0xeeeeeeee,
+0xeee20000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0000002e,0xeeeeeeee,0xe2000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x7eeeeee2,0x00000000,0x00000400,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x041ee700,0x00000000,0x0003ff30,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00040000,0x00000000,0x04ffffff,0x40000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000004,
+0xffffffff,0xff400000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x000004ff,0xffffffff,0xfff30000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x0004ffff,0xffffffff,0xfffff400,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x004fffff,0xffffffff,0xfffffff4,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00043fff,0xffffffff,0xffffffff,0x30000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x000004ff,0xffffffff,
+0xffffffff,0xff400000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00047700,0x00000003,0xffffffff,0xffffffff,0xffff4000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x001eeee4,0x00000000,
+0x4fffffff,0xffffffff,0xfffff300,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x7eeeeeee,0x14000000,0x004fffff,0xffffffff,0xffffff30,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x0000007e,0xeeeeeeee,
+0xee200000,0x00003fff,0xffffffff,0xffff3400,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00002eee,0xeeeeeeee,0xeeee4000,0x000004ff,0xffffffff,
+0xfff40000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x002eeeee,
+0xeeeeeeee,0xeeeee140,0x00000004,0xffffffff,0xf4000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x0041eeee,0xeeeeeeee,0xeeeeeee7,0x00000000,
+0x43fffff4,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00002eee,0xeeeeeeee,0xeeeeeeee,0x12000000,0x004ff400,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00004000,0x0000007e,0xeeeeeeee,0xeeeeeeee,
+0xee100000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x004fff40,0x00000004,0x1eeeeeee,0xeeeeeeee,0xeeee7000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x4ffffff3,0x00000000,0x02eeeeee,
+0xeeeeeeee,0xeeeeee40,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000043,0xffffffff,0xf3000000,0x0001eeee,0xeeeeeeee,0xeeeee200,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x000043ff,0xffffffff,0xfff40000,
+0x00004eee,0xeeeeeeee,0xeee70000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0043ffff,0xffffffff,0xffff3400,0x0000002e,0xeeeeeeee,0xe7400000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00ffffff,0xffffffff,
+0xffffff30,0x00000000,0x1eeeeee7,0x40000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0003ffff,0xffffffff,0xffffffff,0x40000000,0x04eee140,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x000003ff,
+0xffffffff,0xffffffff,0xf3000000,0x00024000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x0000004f,0xffffffff,0xffffffff,0xfff30000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x3fffffff,0xffffffff,0xfffff400,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00ffffff,0xffffffff,
+0xfffff300,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x0004ffff,0xffffffff,0xffff3000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x000003ff,
+0xffffffff,0xff400000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x0000004f,0xffffffff,0x30000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x4fffff30,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x003f3000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,0x00000000,
+0x00000000,0x0000babe
+};
*/
#include <common.h>
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
#include <pci.h>
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
-#if defined(CONFIG_OF_FLAT_TREE)
- u32 *p;
- int len;
-
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
-#endif
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
-#if defined(CONFIG_OF_FLAT_TREE)
- u32 *p;
- int len;
-
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
-#endif
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#else
#include <asm/mmu.h>
#endif
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
#if defined(CONFIG_PQ_MDS_PIB)
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
-#if defined(CONFIG_OF_FLAT_TREE)
- u32 *p;
- int len;
-
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
-#endif
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#include <common.h>
#include <pci.h>
#include <i2c.h>
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
+#include <fdt_support.h>
#endif
#include <asm/fsl_i2c.h>
#endif /* CONFIG_PCISLAVE */
#if defined(CONFIG_OF_LIBFDT)
-void
-ft_pci_setup(void *blob, bd_t *bd)
+void ft_pci_setup(void *blob, bd_t *bd)
{
int nodeoffset;
- int err;
int tmp[2];
+ const char *path;
- nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
+ nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
- tmp[0] = cpu_to_be32(hose[0].first_busno);
- tmp[1] = cpu_to_be32(hose[0].last_busno);
- err = fdt_setprop(blob, nodeoffset, "bus-range",
- tmp, sizeof(tmp));
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- err = fdt_setprop(blob, nodeoffset, "clock-frequency",
- tmp, sizeof(tmp[0]));
- }
-}
-#elif defined(CONFIG_OF_FLAT_TREE)
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
-
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
- if (p != NULL) {
- p[0] = hose[0].first_busno;
- p[1] = hose[0].last_busno;
+ path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(hose[0].first_busno);
+ tmp[1] = cpu_to_be32(hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
}
}
-#endif /* CONFIG_OF_FLAT_TREE */
+#endif /* CONFIG_OF_LIBFDT */
#endif /* CONFIG_PCI */
#if defined(CONFIG_SPD_EEPROM)
#include <spd_sdram.h>
#endif
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
-#if defined(CONFIG_OF_FLAT_TREE)
- u32 *p;
- int len;
-
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
-#endif
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#include <pci.h>
#include <asm/mpc8349_pci.h>
#include <i2c.h>
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
+#include <fdt_support.h>
#endif
}
#if defined(CONFIG_OF_LIBFDT)
-void
-ft_pci_setup(void *blob, bd_t *bd)
+void ft_pci_setup(void *blob, bd_t *bd)
{
int nodeoffset;
- int err;
int tmp[2];
+ const char *path;
- nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
+ nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
- tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
- tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
- err = fdt_setprop(blob, nodeoffset, "bus-range",
- tmp, sizeof(tmp));
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- err = fdt_setprop(blob, nodeoffset, "clock-frequency",
- tmp, sizeof(tmp[0]));
- }
+ path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
#ifdef CONFIG_MPC83XX_PCI2
- nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8600");
- if (nodeoffset >= 0) {
- tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
- tmp[1] = cpu_to_be32(pci_hose[1].last_busno);
- err = fdt_setprop(blob, nodeoffset, "bus-range",
- tmp, sizeof(tmp));
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- err = fdt_setprop(blob, nodeoffset, "clock-frequency",
- tmp, sizeof(tmp[0]));
- }
+ path = fdt_getprop(blob, nodeoffset, "pci1", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
#endif
-}
-#elif defined(CONFIG_OF_FLAT_TREE)
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
-
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
- if (p != NULL) {
- p[0] = pci_hose[0].first_busno;
- p[1] = pci_hose[0].last_busno;
- }
-
-#ifdef CONFIG_MPC83XX_PCI2
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
- if (p != NULL) {
- p[0] = pci_hose[1].first_busno;
- p[1] = pci_hose[1].last_busno;
}
-#endif
}
-#endif /* CONFIG_OF_FLAT_TREE */
+#endif /* CONFIG_OF_LIBFDT */
#endif /* CONFIG_PCI */
#else
#include <asm/mmu.h>
#endif
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
-#if defined(CONFIG_OF_FLAT_TREE)
- u32 *p;
- int len;
-
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
-#endif
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#include <pci.h>
#include <asm/mpc8349_pci.h>
#include <i2c.h>
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
+#include <fdt_support.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
}
#if defined(CONFIG_OF_LIBFDT)
-void
-ft_pci_setup(void *blob, bd_t *bd)
+void ft_pci_setup(void *blob, bd_t *bd)
{
int nodeoffset;
- int err;
int tmp[2];
+ const char *path;
- nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
+ nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
- tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
- tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
- err = fdt_setprop(blob, nodeoffset, "bus-range",
- tmp, sizeof(tmp));
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- err = fdt_setprop(blob, nodeoffset, "clock-frequency",
- tmp, sizeof(tmp[0]));
- }
+ path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
#ifdef CONFIG_MPC83XX_PCI2
- nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
- if (nodeoffset >= 0) {
- tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
- tmp[1] = cpu_to_be32(pci_hose[1].last_busno);
- err = fdt_setprop(blob, nodeoffset, "bus-range",
- tmp, sizeof(tmp));
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- err = fdt_setprop(blob, nodeoffset, "clock-frequency",
- tmp, sizeof(tmp[0]));
- }
+ path = fdt_getprop(blob, nodeoffset, "pci1", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
#endif
-}
-#elif defined(CONFIG_OF_FLAT_TREE)
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
-
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
- if (p != NULL) {
- p[0] = pci_hose[0].first_busno;
- p[1] = pci_hose[0].last_busno;
- }
-
-#ifdef CONFIG_MPC83XX_PCI2
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
- if (p != NULL) {
- p[0] = pci_hose[1].first_busno;
- p[1] = pci_hose[1].last_busno;
}
-#endif
}
-#endif /* CONFIG_OF_FLAT_TREE */
+#endif /* CONFIG_OF_LIBFDT */
#endif /* CONFIG_PCI */
#else
#include <asm/mmu.h>
#endif
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
#if defined(CONFIG_PQ_MDS_PIB)
{0, 1, 3, 0, 2}, /* MDIO */
{0, 2, 1, 0, 1}, /* MDC */
+ {5, 0, 1, 0, 2}, /* UART2_SOUT */
+ {5, 1, 2, 0, 3}, /* UART2_CTS */
+ {5, 2, 1, 0, 1}, /* UART2_RTS */
+ {5, 3, 2, 0, 2}, /* UART2_SIN */
+
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
};
immr->sysconf.spridr == SPR_8360E_REV21)
bcsr[0xe] = 0x30;
+ /* Enable second UART */
+ bcsr[0x9] &= ~0x01;
+
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
-#if defined(CONFIG_OF_FLAT_TREE)
- u32 *p;
- int len;
-
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
-#endif
+ const immap_t *immr = (immap_t *)CFG_IMMR;
+
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+ /*
+ * mpc8360ea pb mds errata 2: RGMII timing
+ * if on mpc8360ea rev. 2.1,
+ * change both ucc phy-connection-types from rgmii-id to rgmii-rxid
+ */
+ if (immr->sysconf.spridr == SPR_8360_REV21 ||
+ immr->sysconf.spridr == SPR_8360E_REV21) {
+ int nodeoffset;
+ const char *prop;
+ const char *path;
+
+ nodeoffset = fdt_path_offset(fdt, "/aliases");
+ if (nodeoffset >= 0) {
+#if defined(CONFIG_HAS_ETH0)
+ /* fixup UCC 1 if using rgmii-id mode */
+ path = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
+ if (path) {
+ prop = fdt_getprop(blob, nodeoffset,
+ "phy-connection-type", 0);
+ if (prop && (strcmp(prop, "rgmii-id") == 0))
+ fdt_setprop(blob, nodeoffset, "phy-connection-type",
+ "rgmii-rxid", sizeof("rgmii-rxid"));
+ }
+#endif
+#if defined(CONFIG_HAS_ETH1)
+ /* fixup UCC 2 if using rgmii-id mode */
+ path = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
+ if (path) {
+ prop = fdt_getprop(blob, nodeoffset,
+ "phy-connection-type", 0);
+ if (prop && (strcmp(prop, "rgmii-id") == 0))
+ fdt_setprop(blob, nodeoffset, "phy-connection-type",
+ "rgmii-rxid", sizeof("rgmii-rxid"));
+ }
+#endif
+ }
+ }
}
#endif
#include <common.h>
#include <pci.h>
#include <i2c.h>
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
+#include <fdt_support.h>
#endif
#include <asm/fsl_i2c.h>
#endif /* CONFIG_PCISLAVE */
#if defined(CONFIG_OF_LIBFDT)
-void
-ft_pci_setup(void *blob, bd_t *bd)
+void ft_pci_setup(void *blob, bd_t *bd)
{
int nodeoffset;
- int err;
int tmp[2];
+ const char *path;
- nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
+ nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
- tmp[0] = cpu_to_be32(hose[0].first_busno);
- tmp[1] = cpu_to_be32(hose[0].last_busno);
- err = fdt_setprop(blob, nodeoffset, "bus-range",
- tmp, sizeof(tmp));
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- err = fdt_setprop(blob, nodeoffset, "clock-frequency",
- tmp, sizeof(tmp[0]));
- }
-}
-#elif defined(CONFIG_OF_FLAT_TREE)
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
-
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
- if (p != NULL) {
- p[0] = hose[0].first_busno;
- p[1] = hose[0].last_busno;
+ path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(hose[0].first_busno);
+ tmp[1] = cpu_to_be32(hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
}
}
-#endif /* CONFIG_OF_FLAT_TREE */
+#endif /* CONFIG_OF_LIBFDT */
#endif /* CONFIG_PCI */
--- /dev/null
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o pci.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MPC837xEMDS
+#
+
+TEXT_BASE = 0xFE000000
--- /dev/null
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * CREDITS: Kim Phillips contribute to LIBFDT code
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <spd.h>
+#if defined(CONFIG_SPD_EEPROM)
+#include <spd_sdram.h>
+#endif
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#endif
+#if defined(CONFIG_PQ_MDS_PIB)
+#include "../common/pq-mds-pib.h"
+#endif
+
+int board_early_init_f(void)
+{
+ u8 *bcsr = (u8 *)CFG_BCSR;
+
+ /* Enable flash write */
+ bcsr[0x9] &= ~0x04;
+ /* Clear all of the interrupt of BCSR */
+ bcsr[0xe] = 0xff;
+
+ return 0;
+}
+
+int board_early_init_r(void)
+{
+#ifdef CONFIG_PQ_MDS_PIB
+ pib_init();
+#endif
+ return 0;
+}
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+int fixed_sdram(void);
+
+long int initdram(int board_type)
+{
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ u32 msize = 0;
+
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
+ return -1;
+
+#if defined(CONFIG_SPD_EEPROM)
+ msize = spd_sdram();
+#else
+ msize = fixed_sdram();
+#endif
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
+ /* Initialize DDR ECC byte */
+ ddr_enable_ecc(msize * 1024 * 1024);
+#endif
+
+ /* return total bus DDR size(bytes) */
+ return (msize * 1024 * 1024);
+}
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ * fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+int fixed_sdram(void)
+{
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+ u32 msize_log2 = __ilog2(msize);
+
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+ im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
+
+#if (CFG_DDR_SIZE != 512)
+#warning Currenly any ddr size other than 512 is not supported
+#endif
+ im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
+ udelay(50000);
+
+ im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
+ udelay(1000);
+
+ im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
+ im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
+ udelay(1000);
+
+ im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
+ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+ im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
+ im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
+ im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
+ im->ddr.sdram_mode = CFG_DDR_MODE;
+ im->ddr.sdram_mode2 = CFG_DDR_MODE2;
+ im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+ __asm__ __volatile__("sync");
+ udelay(1000);
+
+ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+ udelay(2000);
+ return CFG_DDR_SIZE;
+}
+#endif /*!CFG_SPD_EEPROM */
+
+int checkboard(void)
+{
+ puts("Board: Freescale MPC837xEMDS\n");
+ return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+}
+#endif /* CONFIG_OF_BOARD_SETUP */
--- /dev/null
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <common.h>
+#include <mpc83xx.h>
+#include <pci.h>
+#include <i2c.h>
+#include <asm/fsl_i2c.h>
+
+#if defined(CONFIG_PCI)
+static struct pci_region pci_regions[] = {
+ {
+ bus_start: CFG_PCI_MEM_BASE,
+ phys_start: CFG_PCI_MEM_PHYS,
+ size: CFG_PCI_MEM_SIZE,
+ flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+ },
+ {
+ bus_start: CFG_PCI_MMIO_BASE,
+ phys_start: CFG_PCI_MMIO_PHYS,
+ size: CFG_PCI_MMIO_SIZE,
+ flags: PCI_REGION_MEM
+ },
+ {
+ bus_start: CFG_PCI_IO_BASE,
+ phys_start: CFG_PCI_IO_PHYS,
+ size: CFG_PCI_IO_SIZE,
+ flags: PCI_REGION_IO
+ }
+};
+
+void pci_init_board(void)
+{
+ volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+ volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
+ volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
+ struct pci_region *reg[] = { pci_regions };
+
+ /* Enable all 5 PCI_CLK_OUTPUTS */
+ clk->occr |= 0xf8000000;
+ udelay(2000);
+
+ /* Configure PCI Local Access Windows */
+ pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
+
+ pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
+
+ udelay(2000);
+
+ mpc83xx_pci_init(1, reg, 0);
+}
+#endif /* CONFIG_PCI */
--- /dev/null
+# Copyright 2007 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o \
+ ../common/sys_eeprom.o \
+ ../common/pixis.o \
+ mpc8610hpcd_diu.o \
+ ../common/fsl_diu_fb.o
+
+SOBJS := init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS) $(SOBJS)
+
+.PHONY: distclean
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+# Copyright 2007 Freescale Semiconductor.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xfff00000
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8610=1 -maltivec -mabi=altivec -msoft-float -O2
--- /dev/null
+/*
+ * Copyright 2007 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <config.h>
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <mpc86xx.h>
+
+#define LAWAR_TRGT_PCI1 0x00000000
+#define LAWAR_TRGT_PCIE1 0x00200000
+#define LAWAR_TRGT_PCIE2 0x00100000
+#define LAWAR_TRGT_LBC 0x00400000
+#define LAWAR_TRGT_DDR 0x00f00000
+
+#if !defined(CONFIG_SPD_EEPROM)
+#define LAWBAR1 ((CFG_DDR_SDRAM_BASE>>12) & 0xffffff)
+#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_512M))
+#else
+#define LAWBAR1 0
+#define LAWAR1 ((LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_512M)) & ~LAWAR_EN)
+#endif
+
+#define LAWBAR2 ((CFG_PCIE1_MEM_BASE>>12) & 0xffffff)
+#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#define LAWBAR3 ((CFG_PCIE2_MEM_BASE>>12) & 0xffffff)
+#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#define LAWBAR4 ((PIXIS_BASE>>12) & 0xffffff)
+#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_2M))
+
+#define LAWBAR5 ((CFG_PCIE1_IO_PHYS>>12) & 0xffffff)
+#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
+
+#define LAWBAR6 ((CFG_PCIE2_IO_PHYS>>12) & 0xffffff)
+#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_PCIE2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
+
+#define LAWBAR7 ((CFG_FLASH_BASE >>12) & 0xffffff)
+#define LAWAR7 (LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#define LAWBAR8 ((CFG_PCI1_MEM_PHYS>>12) & 0xffffff)
+#define LAWAR8 (LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#define LAWBAR9 ((CFG_PCI1_IO_PHYS>>12) & 0xffffff)
+#define LAWAR9 (LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
+
+
+ .section .bootpg, "ax"
+ .globl law_entry
+law_entry:
+ lis r7,CFG_CCSRBAR@h
+ ori r7,r7,CFG_CCSRBAR@l
+
+ addi r4,r7,0
+ addi r5,r7,0
+
+ /* Skip LAWAR0, start at LAWAR1 */
+ lis r6,LAWBAR1@h
+ ori r6,r6,LAWBAR1@l
+ stwu r6, 0xc28(r4)
+
+ lis r6,LAWAR1@h
+ ori r6,r6,LAWAR1@l
+ stwu r6, 0xc30(r5)
+
+ /* LAWBAR2, LAWAR2 */
+ lis r6,LAWBAR2@h
+ ori r6,r6,LAWBAR2@l
+ stwu r6, 0x20(r4)
+
+ lis r6,LAWAR2@h
+ ori r6,r6,LAWAR2@l
+ stwu r6, 0x20(r5)
+
+ /* LAWBAR3, LAWAR3 */
+ lis r6,LAWBAR3@h
+ ori r6,r6,LAWBAR3@l
+ stwu r6, 0x20(r4)
+
+ lis r6,LAWAR3@h
+ ori r6,r6,LAWAR3@l
+ stwu r6, 0x20(r5)
+
+ /* LAWBAR4, LAWAR4 */
+ lis r6,LAWBAR4@h
+ ori r6,r6,LAWBAR4@l
+ stwu r6, 0x20(r4)
+
+ lis r6,LAWAR4@h
+ ori r6,r6,LAWAR4@l
+ stwu r6, 0x20(r5)
+ /* LAWBAR5, LAWAR5 */
+ lis r6,LAWBAR5@h
+ ori r6,r6,LAWBAR5@l
+ stwu r6, 0x20(r4)
+
+ lis r6,LAWAR5@h
+ ori r6,r6,LAWAR5@l
+ stwu r6, 0x20(r5)
+
+ /* LAWBAR6, LAWAR6 */
+ lis r6,LAWBAR6@h
+ ori r6,r6,LAWBAR6@l
+ stwu r6, 0x20(r4)
+
+ lis r6,LAWAR6@h
+ ori r6,r6,LAWAR6@l
+ stwu r6, 0x20(r5)
+
+ /* LAWBAR7, LAWAR7 */
+ lis r6,LAWBAR7@h
+ ori r6,r6,LAWBAR7@l
+ stwu r6, 0x20(r4)
+
+ lis r6,LAWAR7@h
+ ori r6,r6,LAWAR7@l
+ stwu r6, 0x20(r5)
+
+ /* LAWBAR8, LAWAR8 */
+ lis r6,LAWBAR8@h
+ ori r6,r6,LAWBAR8@l
+ stwu r6, 0x20(r4)
+
+ lis r6,LAWAR8@h
+ ori r6,r6,LAWAR8@l
+ stwu r6, 0x20(r5)
+
+ /* LAWBAR9, LAWAR9 */
+ lis r6,LAWBAR9@h
+ ori r6,r6,LAWBAR9@l
+ stwu r6, 0x20(r4)
+
+ lis r6,LAWAR9@h
+ ori r6,r6,LAWAR9@l
+ stwu r6, 0x20(r5)
+
+ blr
--- /dev/null
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#define DEBUG
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_86xx.h>
+#include <asm/immap_fsl_pci.h>
+#include <spd.h>
+#include <asm/io.h>
+
+
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+extern void ft_cpu_setup(void *blob, bd_t *bd);
+#endif
+
+#include "../common/pixis.h"
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+#if defined(CONFIG_SPD_EEPROM)
+#include "spd_sdram.h"
+#endif
+
+void sdram_init(void);
+long int fixed_sdram(void);
+
+/* called before any console output */
+int board_early_init_f(void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+
+ gur->gpiocr |= 0x88aa5500; /* DIU16, IR1, UART0, UART2 */
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ u8 tmp_val, version;
+
+ /*Do not use 8259PIC*/
+ tmp_val = in8(PIXIS_BASE + PIXIS_BRDCFG0);
+ out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val | 0x80);
+
+ /*For FPGA V7 or higher, set the IRQMAPSEL to 0 to use MAP0 interrupt*/
+ version = in8(PIXIS_BASE + PIXIS_PVER);
+ if(version >= 0x07) {
+ tmp_val = in8(PIXIS_BASE + PIXIS_BRDCFG0);
+ out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val & 0xbf);
+ }
+
+ /* Using this for DIU init before the driver in linux takes over
+ * Enable the TFP410 Encoder (I2C address 0x38)
+ */
+
+ tmp_val = 0xBF;
+ i2c_write(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
+ /* Verify if enabled */
+ tmp_val = 0;
+ i2c_read(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
+ debug("DVI Encoder Read: 0x%02lx\n",tmp_val);
+
+ tmp_val = 0x10;
+ i2c_write(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
+ /* Verify if enabled */
+ tmp_val = 0;
+ i2c_read(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
+ debug("DVI Encoder Read: 0x%02lx\n",tmp_val);
+
+#ifdef CONFIG_FSL_DIU_FB
+ mpc8610hpcd_diu_init();
+#endif
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
+
+ puts("Board: MPC8610HPCD\n");
+
+ mcm->abcr |= 0x00010000; /* 0 */
+ mcm->hpmr3 = 0x80000008; /* 4c */
+ mcm->hpmr0 = 0;
+ mcm->hpmr1 = 0;
+ mcm->hpmr2 = 0;
+ mcm->hpmr4 = 0;
+ mcm->hpmr5 = 0;
+
+ return 0;
+}
+
+
+long int
+initdram(int board_type)
+{
+ long dram_size = 0;
+
+#if defined(CONFIG_SPD_EEPROM)
+ dram_size = spd_sdram();
+#else
+ dram_size = fixed_sdram();
+#endif
+
+#if defined(CFG_RAMBOOT)
+ puts(" DDR: ");
+ return dram_size;
+#endif
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ /*
+ * Initialize and enable DDR ECC.
+ */
+ ddr_enable_ecc(dram_size);
+#endif
+
+ puts(" DDR: ");
+ return dram_size;
+}
+
+
+#if defined(CFG_DRAM_TEST)
+int
+testdram(void)
+{
+ uint *pstart = (uint *) CFG_MEMTEST_START;
+ uint *pend = (uint *) CFG_MEMTEST_END;
+ uint *p;
+
+ puts("SDRAM test phase 1:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ puts("SDRAM test phase 2:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ puts("SDRAM test passed.\n");
+ return 0;
+}
+#endif
+
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*
+ * Fixed sdram init -- doesn't use serial presence detect.
+ */
+
+long int fixed_sdram(void)
+{
+#if !defined(CFG_RAMBOOT)
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
+ uint d_init;
+
+ ddr->cs0_bnds = 0x0000001f;
+ ddr->cs0_config = 0x80010202;
+
+ ddr->ext_refrec = 0x00000000;
+ ddr->timing_cfg_0 = 0x00260802;
+ ddr->timing_cfg_1 = 0x3935d322;
+ ddr->timing_cfg_2 = 0x14904cc8;
+ ddr->sdram_mode_1 = 0x00480432;
+ ddr->sdram_mode_2 = 0x00000000;
+ ddr->sdram_interval = 0x06180fff; /* 0x06180100; */
+ ddr->sdram_data_init = 0xDEADBEEF;
+ ddr->sdram_clk_cntl = 0x03800000;
+ ddr->sdram_cfg_2 = 0x04400010;
+
+#if defined(CONFIG_DDR_ECC)
+ ddr->err_int_en = 0x0000000d;
+ ddr->err_disable = 0x00000000;
+ ddr->err_sbe = 0x00010000;
+#endif
+ asm("sync;isync");
+
+ udelay(500);
+
+ ddr->sdram_cfg_1 = 0xc3000000; /* 0xe3008000;*/
+
+
+#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ d_init = 1;
+ debug("DDR - 1st controller: memory initializing\n");
+ /*
+ * Poll until memory is initialized.
+ * 512 Meg at 400 might hit this 200 times or so.
+ */
+ while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0)
+ udelay(1000);
+
+ debug("DDR: memory initialized\n\n");
+ asm("sync; isync");
+ udelay(500);
+#endif
+
+ return 512 * 1024 * 1024;
+#endif
+ return CFG_SDRAM_SIZE * 1024 * 1024;
+}
+
+#endif
+
+#if defined(CONFIG_PCI)
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_fsl86xxads_config_table[] = {
+ {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_IDSEL_NUMBER, PCI_ANY_ID,
+ pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
+ PCI_ENET0_MEMADDR,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} },
+ {}
+};
+#endif
+
+
+static struct pci_controller pci1_hose = {
+#ifndef CONFIG_PCI_PNP
+config_table:pci_mpc86xxcts_config_table
+#endif
+};
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif
+
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif
+
+int first_free_busno = 0;
+
+void pci_init_board(void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ uint devdisr = gur->devdisr;
+ uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+ uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+
+ printf( " pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
+ devdisr, io_sel, host_agent);
+
+
+#ifdef CONFIG_PCIE1
+ {
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pcie1_hose;
+ int pcie_configured = (io_sel == 1) || (io_sel == 4);
+ int pcie_ep = (host_agent == 0) || (host_agent == 2) ||
+ (host_agent == 5);
+
+ if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)) {
+ printf(" PCIe 1 connected to Uli as %s (base address %x)\n",
+ pcie_ep ? "End Point" : "Root Complex",
+ (uint)pci);
+ if (pci->pme_msg_det)
+ pci->pme_msg_det = 0xffffffff;
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCIE1_MEM_BASE,
+ CFG_PCIE1_MEM_PHYS,
+ CFG_PCIE1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCIE1_IO_BASE,
+ CFG_PCIE1_IO_PHYS,
+ CFG_PCIE1_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ hose->first_busno = first_free_busno;
+ pci_setup_indirect(hose, (int)&pci->cfg_addr,
+ (int)&pci->cfg_data);
+
+ fsl_pci_init(hose);
+
+ first_free_busno = hose->last_busno + 1;
+ printf(" PCI-Express 1 on bus %02x - %02x\n",
+ hose->first_busno, hose->last_busno);
+
+ } else
+ puts(" PCI-Express 1: Disabled\n");
+ }
+#else
+ puts("PCI-Express 1: Disabled\n");
+#endif /* CONFIG_PCIE1 */
+
+
+#ifdef CONFIG_PCIE2
+ {
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pcie2_hose;
+
+ int pcie_configured = (io_sel == 0) || (io_sel == 4);
+ int pcie_ep = (host_agent == 0) || (host_agent == 1) ||
+ (host_agent == 4);
+
+ if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)) {
+ printf(" PCI-Express 2 connected to slot as %s" \
+ " (base address %x)\n",
+ pcie_ep ? "End Point" : "Root Complex",
+ (uint)pci);
+ if (pci->pme_msg_det)
+ pci->pme_msg_det = 0xffffffff;
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCIE2_MEM_BASE,
+ CFG_PCIE2_MEM_PHYS,
+ CFG_PCIE2_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCIE2_IO_BASE,
+ CFG_PCIE2_IO_PHYS,
+ CFG_PCIE2_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ hose->first_busno = first_free_busno;
+ pci_setup_indirect(hose, (int)&pci->cfg_addr,
+ (int)&pci->cfg_data);
+
+ fsl_pci_init(hose);
+
+ first_free_busno = hose->last_busno + 1;
+ printf(" PCI-Express 2 on bus %02x - %02x\n",
+ hose->first_busno, hose->last_busno);
+ } else
+ puts(" PCI-Express 2: Disabled\n");
+ }
+#else
+ puts("PCI-Express 2: Disabled\n");
+#endif /* CONFIG_PCIE2 */
+
+
+#ifdef CONFIG_PCI1
+ {
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pci1_hose;
+ int pci_agent = (host_agent >= 4) && (host_agent <= 6);
+
+ if ( !(devdisr & MPC86xx_DEVDISR_PCI1)) {
+ printf(" PCI connected to PCI slots as %s" \
+ " (base address %x)\n",
+ pci_agent ? "Agent" : "Host",
+ (uint)pci);
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCI1_MEM_BASE,
+ CFG_PCI1_MEM_PHYS,
+ CFG_PCI1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCI1_IO_BASE,
+ CFG_PCI1_IO_PHYS,
+ CFG_PCI1_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ hose->first_busno = first_free_busno;
+ pci_setup_indirect(hose, (int) &pci->cfg_addr,
+ (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+
+ first_free_busno = hose->last_busno + 1;
+ printf(" PCI on bus %02x - %02x\n",
+ hose->first_busno, hose->last_busno);
+
+
+ } else
+ puts(" PCI: Disabled\n");
+ }
+#endif /* CONFIG_PCI1 */
+}
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ u32 *p;
+ int len;
+
+ ft_cpu_setup(blob, bd);
+
+ p = ft_get_prop(blob, "/memory/reg", &len);
+ if (p != NULL) {
+ *p++ = cpu_to_be32(bd->bi_memstart);
+ *p = cpu_to_be32(bd->bi_memsize);
+ }
+
+#ifdef CONFIG_PCI1
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len);
+ if (p != NULL) {
+ p[0] = 0;
+ p[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+ debug("pci@8000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+ }
+#endif
+#ifdef CONFIG_PCIE1
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@a000/bus-range", &len);
+ if (p != NULL) {
+ p[0] = 0;
+ p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+ debug("pcie@9000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+ }
+#endif
+#ifdef CONFIG_PCIE2
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@9000/bus-range", &len);
+ if (p != NULL) {
+ p[0] = 0;
+ p[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
+ debug("pcie@9000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+ }
+#endif
+
+}
+#endif
+
+/*
+ * get_board_sys_clk
+ * Reads the FPGA on board for CONFIG_SYS_CLK_FREQ
+ */
+
+unsigned long
+get_board_sys_clk(ulong dummy)
+{
+ u8 i;
+ ulong val = 0;
+ ulong a;
+
+ a = PIXIS_BASE + PIXIS_SPD;
+ i = in8(a);
+ i &= 0x07;
+
+ switch (i) {
+ case 0:
+ val = 33333000;
+ break;
+ case 1:
+ val = 39999600;
+ break;
+ case 2:
+ val = 49999500;
+ break;
+ case 3:
+ val = 66666000;
+ break;
+ case 4:
+ val = 83332500;
+ break;
+ case 5:
+ val = 99999000;
+ break;
+ case 6:
+ val = 133332000;
+ break;
+ case 7:
+ val = 166665000;
+ break;
+ }
+
+ return val;
+}
--- /dev/null
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ * York Sun <yorksun@freescale.com>
+ *
+ * FSL DIU Framebuffer driver
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_FSL_DIU_FB
+
+#include "../common/pixis.h"
+#include "../common/fsl_diu_fb.h"
+
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
+#include <devices.h>
+#include <video_fb.h>
+#endif
+
+extern unsigned int FSL_Logo_BMP[];
+
+static int xres, yres;
+
+
+void mpc8610hpcd_diu_init(void)
+{
+ char *monitor_port;
+ int gamma_fix;
+ unsigned int pixel_format;
+ unsigned char tmp_val;
+ unsigned char pixis_arch;
+
+ tmp_val = in8(PIXIS_BASE + PIXIS_BRDCFG0);
+ pixis_arch = in8(PIXIS_BASE + PIXIS_VER);
+
+ monitor_port = getenv("monitor");
+ if (!strncmp(monitor_port, "0", 1)) { /* 0 - DVI */
+ xres = 1280;
+ yres = 1024;
+ if (pixis_arch == 0x01)
+ pixel_format = 0x88882317;
+ else
+ pixel_format = 0x88883316;
+ gamma_fix = 0;
+ out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val | 0x08);
+
+ } else if (!strncmp(monitor_port, "1", 1)) { /* 1 - Single link LVDS */
+ xres = 1024;
+ yres = 768;
+ pixel_format = 0x88883316;
+ gamma_fix = 0;
+ out8(PIXIS_BASE + PIXIS_BRDCFG0, (tmp_val & 0xf7) | 0x10);
+
+ } else if (!strncmp(monitor_port, "2", 1)) { /* 2 - Double link LVDS */
+ xres = 1280;
+ yres = 1024;
+ pixel_format = 0x88883316;
+ gamma_fix = 1;
+ out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val & 0xe7);
+
+ } else { /* DVI */
+ xres = 1280;
+ yres = 1024;
+ pixel_format = 0x88882317;
+ gamma_fix = 0;
+ out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val | 0x08);
+ }
+
+ fsl_diu_init(xres, pixel_format, gamma_fix,
+ (unsigned char *)FSL_Logo_BMP);
+}
+
+int mpc8610diu_init_show_bmp(cmd_tbl_t *cmdtp,
+ int flag, int argc, char *argv[])
+{
+ unsigned int addr;
+
+ if (argc < 2) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ if (!strncmp(argv[1],"init",4)) {
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
+ fsl_diu_clear_screen();
+ drv_video_init();
+#else
+ mpc8610hpcd_diu_init();
+#endif
+ } else {
+ addr = simple_strtoul(argv[1], NULL, 16);
+ fsl_diu_clear_screen();
+ fsl_diu_display_bmp((unsigned char *)addr, 0, 0, 0);
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ diufb, CFG_MAXARGS, 1, mpc8610diu_init_show_bmp,
+ "diufb init | addr - Init or Display BMP file\n",
+ "init\n - initialize DIU\n"
+ "addr\n - display bmp at address 'addr'\n"
+ );
+
+
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
+
+/*
+ * The Graphic Device
+ */
+GraphicDevice ctfb;
+void *video_hw_init(void)
+{
+ GraphicDevice *pGD = (GraphicDevice *) &ctfb;
+ struct fb_info *info;
+
+ mpc8610hpcd_diu_init();
+
+ /* fill in Graphic device struct */
+ sprintf(pGD->modeIdent,
+ "%dx%dx%d %ldkHz %ldHz",
+ xres, yres, 32, 64, 60);
+
+ pGD->frameAdrs = (unsigned int)fsl_fb_open(&info);
+ pGD->winSizeX = xres;
+ pGD->winSizeY = yres - info->logo_height;
+ pGD->plnSizeX = pGD->winSizeX;
+ pGD->plnSizeY = pGD->winSizeY;
+
+ pGD->gdfBytesPP = 4;
+ pGD->gdfIndex = GDF_32BIT_X888RGB;
+
+ pGD->isaBase = 0;
+ pGD->pciBase = 0;
+ pGD->memSize = info->screen_size - info->logo_size;
+
+ /* Cursor Start Address */
+ pGD->dprBase = 0;
+ pGD->vprBase = 0;
+ pGD->cprBase = 0;
+
+ return (void *)pGD;
+}
+
+void video_set_lut (unsigned int index, /* color number */
+ unsigned char r, /* red */
+ unsigned char g, /* green */
+ unsigned char b /* blue */
+ )
+{
+ return;
+}
+
+#endif /* defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) */
+
+#endif /* CONFIG_FSL_DIU_FB */
--- /dev/null
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+
+SECTIONS
+{
+
+ /* Read-only sections, merged into text segment: */
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc86xx/start.o (.text)
+ board/freescale/mpc8610hpcd/init.o (.bootpg)
+ cpu/mpc86xx/traps.o (.text)
+ cpu/mpc86xx/interrupts.o (.text)
+ cpu/mpc86xx/cpu_init.o (.text)
+ cpu/mpc86xx/cpu.o (.text)
+ cpu/mpc86xx/speed.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
#include <asm/immap_fsl_pci.h>
#include <spd.h>
#include <asm/io.h>
-
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-extern void ft_cpu_setup(void *blob, bd_t *bd);
-#endif
+#include <libfdt.h>
+#include <fdt_support.h>
#include "../common/pixis.h"
}
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+#if defined(CONFIG_OF_BOARD_SETUP)
void
ft_board_setup(void *blob, bd_t *bd)
{
- u32 *p;
- int len;
+ int node, tmp[2];
+ const char *path;
- ft_cpu_setup(blob, bd);
+ fdt_fixup_ethernet(blob, bd);
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "timebase-frequency", bd->bi_busfreq / 4, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "clock-frequency", bd->bi_intfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+
+ do_fixup_by_compat_u32(blob, "ns16550",
+ "clock-frequency", bd->bi_busfreq, 1);
+
+ fdt_fixup_memory(blob, bd->bi_memstart, bd->bi_memsize);
+
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
#ifdef CONFIG_PCI1
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@8000/bus-range", &len);
- if (p != NULL) {
- p[0] = 0;
- p[1] = pci1_hose.last_busno - pci1_hose.first_busno;
- debug("PCI@8000 first_busno=%d last_busno=%d\n",p[0],p[1]);
- }
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
#endif
#ifdef CONFIG_PCI2
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@9000/bus-range", &len);
- if (p != NULL) {
- p[0] = 0;
- p[1] = pci2_hose.last_busno - pci2_hose.first_busno;
- debug("PCI@9000 first_busno=%d last_busno=%d\n",p[0],p[1]);
- }
+ path = fdt_getprop(blob, node, "pci1", NULL);
+ if (path) {
+ tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
#endif
+ }
}
#endif
DECLARE_GLOBAL_DATA_PTR;
-#if (CONFIG_FPGA)
+#if defined(CONFIG_FPGA)
#if 0
#define GEN860T_FPGA_DEBUG
mii_init ();
#endif
-#if (CONFIG_FPGA)
+#if defined(CONFIG_FPGA)
gen860t_init_fpga ();
#endif
return 0;
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
+++ /dev/null
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*
- * CPU to flash interface is 8-bit, so make declaration accordingly
- */
-typedef unsigned char FLASH_PORT_WIDTH;
-typedef volatile unsigned char FLASH_PORT_WIDTHV;
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define FLASH_CYCLE1 0x0555
-#define FLASH_CYCLE2 0x02aa
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(FPWV *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
-static flash_info_t *flash_get_info(ulong base);
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
- unsigned long size = 0;
- extern void flash_preinit(void);
- ulong flashbase = CFG_FLASH_BASE;
-
- flash_preinit();
-
- /* Init: no FLASHes known */
- memset(&flash_info[0], 0, sizeof(flash_info_t));
-
- flash_info[0].size =
- flash_get_size((FPW *)flashbase, &flash_info[0]);
-
- size = flash_info[0].size;
-
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
- flash_get_info(CFG_MONITOR_BASE));
-#endif
-
-#ifdef CFG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR+CFG_ENV_SIZE-1,
- flash_get_info(CFG_ENV_ADDR));
-#endif
-
- return size ? size : 1;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
- FPWV *base = (FPWV *)(info->start[0]);
-
- /* Put FLASH back in read mode */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
- *base = (FPW)0x00FF00FF; /* Intel Read Mode */
- else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
- *base = (FPW)0x00F000F0; /* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-
-static flash_info_t *flash_get_info(ulong base)
-{
- int i;
- flash_info_t * info;
-
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
- info = & flash_info[i];
- if (info->size && info->start[0] <= base &&
- base <= info->start[0] + info->size - 1)
- break;
- }
-
- return i == CFG_MAX_FLASH_BANKS ? 0 : info;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- case FLASH_MAN_STM: printf ("STM "); break;
- case FLASH_MAN_INTEL: printf ("INTEL "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM116DB:
- printf ("AM29LV116DB (16Mbit, bottom boot sect)\n");
- break;
- case FLASH_AMLV128U:
- printf ("AM29LV128ML (128Mbit, uniform sector size)\n");
- break;
- case FLASH_AM160B:
- printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20,
- info->sector_count);
-
- printf (" Sector Start Addresses:");
-
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (FPWV *addr, flash_info_t *info)
-{
- int i;
- ulong base = (ulong)addr;
-
- /* Write auto select command: read Manufacturer ID */
- /* Write auto select command sequence and test FLASH answer */
- addr[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* for AMD, Intel ignores this */
- addr[FLASH_CYCLE2] = (FPW)0x00550055; /* for AMD, Intel ignores this */
- addr[FLASH_CYCLE1] = (FPW)0x00900090; /* selects Intel or AMD */
-
- /* The manufacturer codes are only 1 byte, so just use 1 byte.
- * This works for any bus width and any FLASH device width.
- */
- udelay(100);
- switch (addr[0] & 0xff) {
-
- case (uchar)AMD_MANUFACT:
- debug ("Manufacturer: AMD (Spansion)\n");
- info->flash_id = FLASH_MAN_AMD;
- break;
-
- case (uchar)INTEL_MANUFACT:
- debug ("Manufacturer: Intel (not supported yet)\n");
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
-
- /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
- if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[1]) {
-
- case (uchar)AMD_ID_LV116DB:
- debug ("Chip: AM29LV116DB\n");
- info->flash_id += FLASH_AM116DB;
- info->sector_count = 35;
- info->size = 0x00200000;
- /*
- * The first 4 sectors are 16 kB, 8 kB, 8 kB and 32 kB, all
- * the other ones are 64 kB
- */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for( i = 4; i < info->sector_count; i++ )
- info->start[i] =
- base + (i * (64 << 10)) - 0x00030000;
- break; /* => 2 MB */
-
- case (FPW)AMD_ID_LV160B:
- debug ("Chip: AM29LV160MB\n");
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00400000;
- /*
- * The first 4 sectors are 16 kB, 8 kB, 8 kB and 32 kB, all
- * the other ones are 64 kB
- */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00008000;
- info->start[2] = base + 0x0000C000;
- info->start[3] = base + 0x00010000;
- for( i = 4; i < info->sector_count; i++ )
- info->start[i] =
- base + (i * 2 * (64 << 10)) - 0x00060000;
- break; /* => 4 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- }
-
- /* Put FLASH back in read mode */
- flash_reset(info);
-
- return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- FPWV *addr = (FPWV*)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- debug ("flash_erase: first: %d last: %d\n", s_first, s_last);
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = (FPW)0x00AA00AA;
- addr[0x02AA] = (FPW)0x00550055;
- addr[0x0555] = (FPW)0x00800080;
- addr[0x0555] = (FPW)0x00AA00AA;
- addr[0x02AA] = (FPW)0x00550055;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (FPWV*)(info->start[sect]);
- addr[0] = (FPW)0x00300030;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (FPWV*)(info->start[l_sect]);
- while ((addr[0] & (FPW)0x00800080) != (FPW)0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (FPWV*)info->start[0];
- addr[0] = (FPW)0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- int i, rc = 0;
-
- for (i = 0; i < cnt; i++)
- if ((rc = write_word_amd(info, (FPW *)(addr+i), src[i])) != 0) {
- return (rc);
- }
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
-{
- ulong start;
- int flag;
- FPWV *base; /* first address in flash bank */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
- base = (FPWV *)(info->start[0]);
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
- base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
- base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer (0);
-
- /* data polling for D7 */
- while ((*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- *dest = (FPW)0x00F000F0; /* reset bank */
- return (1);
- }
- }
- return (0);
-}
--- /dev/null
+/*
+ * Copyright (C) 2007 Semihalf
+ * Written by Marian Balakowicz <m8@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_DDR 1 /* is DDR */
+
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE 0x018D0000
+#define SDRAM_EMODE 0x40090000
+#define SDRAM_CONTROL 0x714F0F00
+#define SDRAM_CONFIG1 0x73711930
+#define SDRAM_CONFIG2 0x46770000
+#define SDRAM_TAPDELAY 0x10000000
#include <mpc5xxx.h>
#include <pci.h>
-#if defined(CONFIG_MPC5200_DDR)
+#if defined(CONFIG_DDR_MT46V16M16)
#include "mt46v16m16-75.h"
-#else
+#elif defined(CONFIG_SDR_MT48LC16M16A2)
#include "mt48lc16m16a2-75.h"
+#elif defined(CONFIG_DDR_MT46V32M16)
+#include "mt46v32m16.h"
+#elif defined(CONFIG_DDR_HYB25D512160BF)
+#include "hyb25d512160bf.h"
+#elif defined(CONFIG_DDR_K4H511638C)
+#include "k4h511638c.h"
+#else
+#error "INKA4x0 SDRAM: invalid chip type specified!"
#endif
#ifndef CFG_RAMBOOT
{
ulong dramsize = 0;
#ifndef CFG_RAMBOOT
- ulong test1, test2;
+ long test1, test2;
/* setup SDRAM chip selects */
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */
/* find RAM size using SDRAM CS0 only */
sdram_start(0);
- test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000);
+ test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
sdram_start(1);
- test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000);
+ test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
int misc_init_f (void)
{
- uchar tmp[10];
+ char tmp[10];
int i, br;
i = getenv_r("brightness", tmp, sizeof(tmp));
--- /dev/null
+/*
+ * Copyright (C) 2007 Semihalf
+ * Written by Marian Balakowicz <m8@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_DDR 1 /* is DDR */
+
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE 0x018D0000
+#define SDRAM_EMODE 0x40090000
+#define SDRAM_CONTROL 0x714F0F00
+#define SDRAM_CONFIG1 0x73722930
+#define SDRAM_CONFIG2 0x46770000
+#define SDRAM_TAPDELAY 0x10000000
#define SDRAM_DDR 1 /* is DDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x018D0000
#define SDRAM_EMODE 0x40090000
-#define SDRAM_CONTROL 0x714f0f00
+#define SDRAM_CONTROL 0x714F0F00
#define SDRAM_CONFIG1 0x73722930
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
-#else
-#error CONFIG_MPC5200 not defined
-#endif
--- /dev/null
+/*
+ * Copyright (C) 2007 Semihalf
+ * Written by Marian Balakowicz <m8@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_DDR 1 /* is DDR */
+
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE 0x018D0000
+#define SDRAM_EMODE 0x40090000
+#define SDRAM_CONTROL 0x714F0F00
+#define SDRAM_CONFIG1 0x73711930
+#define SDRAM_CONFIG2 0x46770000
+#define SDRAM_TAPDELAY 0x10000000
* MA 02111-1307 USA
*/
-#define SDRAM_DDR 1 /* is SDR */
+#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
-/* #define SDRAM_MODE 0x008D0000 */ /* CAS latency 2 */
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
-/* #define SDRAM_CONFIG1 0xD2222800 */ /* CAS latency 2 */
-/*#define SDRAM_CONFIG1 0xD7322800 */ /* SDRAM controller bug workaround */
#define SDRAM_CONFIG2 0x8AD70000
-/*#define SDRAM_CONFIG2 0xDDD70000 */ /* SDRAM controller bug workaround */
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
/*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Larry Johnson, lrj@acm.org
*
* (C) Copyright 2006
*/
#include <common.h>
+#include <asm/gpio.h>
#include <asm/processor.h>
#include <asm-ppc/io.h>
#include <i2c.h>
int board_early_init_f(void)
{
u32 sdr0_pfc1, sdr0_pfc2;
- u32 gpio0_ir;
u32 reg;
int eth;
mtdcr(ebccfga, xbcfg);
mtdcr(ebccfgd, 0xb8400000);
- /*--------------------------------------------------------------------
- * Setup the GPIO pins
- *
- * Korat GPIO usage:
- *
- * Init.
- * Pin Source I/O value Function
- * ------ ------ --- ----- ---------------------------------
- * GPIO00 Alt1 I/O x PerAddr07
- * GPIO01 Alt1 I/O x PerAddr06
- * GPIO02 Alt1 I/O x PerAddr05
- * GPIO03 GPIO x x GPIO03 to expansion bus connector
- * GPIO04 GPIO x x GPIO04 to expansion bus connector
- * GPIO05 GPIO x x GPIO05 to expansion bus connector
- * GPIO06 Alt1 O x PerCS1 (2nd NOR flash)
- * GPIO07 Alt1 O x PerCS2 (CPLD)
- * GPIO08 Alt1 O x PerCS3 to expansion bus connector
- * GPIO09 Alt1 O x PerCS4 to expansion bus connector
- * GPIO10 Alt1 O x PerCS5 to expansion bus connector
- * GPIO11 Alt1 I x PerErr
- * GPIO12 GPIO O 0 ATMega !Reset
- * GPIO13 GPIO O 1 SPI Atmega !SS
- * GPIO14 GPIO O 1 Write protect EEPROM #1 (0xA8)
- * GPIO15 GPIO O 0 CPU Run LED !On
- * GPIO16 Alt1 O x GMC1TxD0
- * GPIO17 Alt1 O x GMC1TxD1
- * GPIO18 Alt1 O x GMC1TxD2
- * GPIO19 Alt1 O x GMC1TxD3
- * GPIO20 Alt1 O x RejectPkt0
- * GPIO21 Alt1 O x RejectPkt1
- * GPIO22 GPIO I x PGOOD_DDR
- * GPIO23 Alt1 O x SCPD0
- * GPIO24 Alt1 O x GMC0TxD2
- * GPIO25 Alt1 O x GMC0TxD3
- * GPIO26 GPIO? I/O x IIC0SDA (selected in SDR0_PFC4)
- * GPIO27 GPIO O 0 PHY #0 1000BASE-X
- * GPIO28 GPIO O 0 PHY #1 1000BASE-X
- * GPIO29 GPIO I x Test jumper !Present
- * GPIO30 GPIO I x SFP module #0 !Present
- * GPIO31 GPIO I x SFP module #1 !Present
- *
- * GPIO32 GPIO O 1 SFP module #0 Tx !Enable
- * GPIO33 GPIO O 1 SFP module #1 Tx !Enable
- * GPIO34 Alt2 I x !UART1_CTS
- * GPIO35 Alt2 O x !UART1_RTS
- * GPIO36 Alt1 I x !UART0_CTS
- * GPIO37 Alt1 O x !UART0_RTS
- * GPIO38 Alt2 O x UART1_Tx
- * GPIO39 Alt2 I x UART1_Rx
- * GPIO40 Alt1 I x IRQ0 (Ethernet 0)
- * GPIO41 Alt1 I x IRQ1 (Ethernet 1)
- * GPIO42 Alt1 I x IRQ2 (PCI interrupt)
- * GPIO43 Alt1 I x IRQ3 (System Alert from CPLD)
- * GPIO44 xxxx x x (grounded through pulldown)
- * GPIO45 GPIO O 0 PHY #0 Enable
- * GPIO46 GPIO O 0 PHY #1 Enable
- * GPIO47 GPIO I x Reset switch !Pressed
- * GPIO48 GPIO I x Shutdown switch !Pressed
- * GPIO49 xxxx x x (reserved for trace port)
- * . . . . .
- * . . . . .
- * . . . . .
- * GPIO63 xxxx x x (reserved for trace port)
- *-------------------------------------------------------------------*/
-
- out_be32((u32 *) GPIO0_OR, 0x00060000);
- out_be32((u32 *) GPIO1_OR, 0xC0000000);
-
- out_be32((u32 *) GPIO0_OSRL, 0x54055400);
- out_be32((u32 *) GPIO0_OSRH, 0x55015000);
- out_be32((u32 *) GPIO1_OSRL, 0x02180000);
- out_be32((u32 *) GPIO1_OSRH, 0x00000000);
-
- out_be32((u32 *) GPIO0_TSRL, 0x54055500);
- out_be32((u32 *) GPIO0_TSRH, 0x00015000);
- out_be32((u32 *) GPIO1_TSRL, 0x00000000);
- out_be32((u32 *) GPIO1_TSRH, 0x00000000);
-
- out_be32((u32 *) GPIO0_TCR, 0x000FF0D8);
- out_be32((u32 *) GPIO1_TCR, 0xD6060000);
-
- out_be32((u32 *) GPIO0_ISR1L, 0x54000100);
- out_be32((u32 *) GPIO0_ISR1H, 0x00500000);
- out_be32((u32 *) GPIO1_ISR1L, 0x00405500);
- out_be32((u32 *) GPIO1_ISR1H, 0x00000000);
-
- out_be32((u32 *) GPIO0_ISR2L, 0x00000000);
- out_be32((u32 *) GPIO0_ISR2H, 0x00000000);
- out_be32((u32 *) GPIO1_ISR2L, 0x04010000);
- out_be32((u32 *) GPIO1_ISR2H, 0x00000000);
-
- out_be32((u32 *) GPIO0_ISR3L, 0x00000000);
- out_be32((u32 *) GPIO0_ISR3H, 0x00000000);
- out_be32((u32 *) GPIO1_ISR3L, 0x00000000);
- out_be32((u32 *) GPIO1_ISR3H, 0x00000000);
-
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
/* Configure the two Ethernet PHYs. For each PHY, configure for fiber
* if the SFP module is present, and for copper if it is not present.
*/
- gpio0_ir = in_be32((u32 *) GPIO0_IR);
for (eth = 0; eth < 2; ++eth) {
- if (gpio0_ir & (0x00000001 << (1 - eth))) {
+ if (gpio_read_in_bit(CFG_GPIO_SFP0_PRESENT_ + eth)) {
/* SFP module not present: configure PHY for copper. */
/* Set PHY to autonegotate 10 MB, 100MB, or 1 GB */
out_8((u8 *) CFG_CPLD_BASE + 0x06,
} else {
/* SFP module present: configure PHY for fiber and
enable output */
- out_be32((u32 *) GPIO0_OR, in_be32((u32 *) GPIO0_OR) |
- (0x00000001 << (4 - eth)));
- out_be32((u32 *) GPIO1_OR, in_be32((u32 *) GPIO1_OR) &
- ~(0x00000001 << (31 - eth)));
+ gpio_write_bit(CFG_GPIO_PHY0_FIBER_SEL + eth, 1);
+ gpio_write_bit(CFG_GPIO_SFP0_TX_EN_ + eth, 0);
}
}
/* enable Ethernet: set GPIO45 and GPIO46 to 1 */
- out_be32((u32 *) GPIO1_OR, in_be32((u32 *) GPIO1_OR) | 0x00060000);
+ gpio_write_bit(CFG_GPIO_PHY0_EN, 1);
+ gpio_write_bit(CFG_GPIO_PHY1_EN, 1);
/* select Ethernet pins */
mfsdr(SDR0_PFC1, sdr0_pfc1);
{
char const *const s = getenv("serial#");
u8 const rev = in_8((u8 *) CFG_CPLD_BASE + 0);
- u32 const gpio0_or = in_be32((u32 *) GPIO0_OR);
printf("Board: Korat, Rev. %X", rev);
if (s != NULL)
printf(", serial# %s", s);
printf(", Ethernet PHY 0: ");
- if (gpio0_or & 0x00000010)
+ if (gpio_read_out_bit(CFG_GPIO_PHY0_FIBER_SEL))
printf("fiber");
else
printf("copper");
printf(", PHY 1: ");
- if (gpio0_or & 0x00000008)
+ if (gpio_read_out_bit(CFG_GPIO_PHY1_FIBER_SEL))
printf("fiber");
else
printf("copper");
#ifdef CFG_INIT_RAM_DCACHE
/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
- tlbentry(CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
+ tlbentry(CFG_INIT_RAM_ADDR, SZ_4K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
#endif
/* TLB-entry for PCI Memory */
#include <asm/io.h>
#include <ppc440.h>
-#include "sdram.h"
-
/*
* This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
* region. Right now the cache should still be disabled in U-Boot because of the
#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
#endif
-void dcbz_area(u32 start_address, u32 num_bytes);
-void dflush(void);
+/*-----------------------------------------------------------------------------+
+ * Prototypes
+ *-----------------------------------------------------------------------------*/
+extern int denali_wait_for_dlllock(void);
+extern void denali_core_search_data_eye(void);
+extern void dcbz_area(u32 start_address, u32 num_bytes);
+extern void dflush(void);
static u32 is_ecc_enabled(void)
{
printf(", CL%d)", val);
}
-static int wait_for_dlllock(void)
-{
- u32 val;
- int wait = 0;
-
- /*
- * Wait for the DCC master delay line to finish calibration
- */
- mtdcr(ddrcfga, DDR0_17);
- val = DDR0_17_DLLLOCKREG_UNLOCKED;
-
- while (wait != 0xffff) {
- val = mfdcr(ddrcfgd);
- if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED)
- /* dlllockreg bit on */
- return 0;
- else
- wait++;
- }
- debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
- debug("Waiting for dlllockreg bit to raise\n");
-
- return -1;
-}
-
-#if defined(CONFIG_DDR_DATA_EYE)
-int wait_for_dram_init_complete(void)
-{
- u32 val;
- int wait = 0;
-
- /*
- * Wait for 'DRAM initialization complete' bit in status register
- */
- mtdcr(ddrcfga, DDR0_00);
-
- while (wait != 0xffff) {
- val = mfdcr(ddrcfgd);
- if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
- /* 'DRAM initialization complete' bit */
- return 0;
- else
- wait++;
- }
-
- debug("DRAM initialization complete bit in status register did not rise\n");
-
- return -1;
-}
-
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-void denali_core_search_data_eye(u32 start_addr, u32 memory_size)
-{
- int k, j;
- u32 val;
- u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
- u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
- u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
- u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
- volatile u32 *ram_pointer;
- u32 test[NUM_TRIES] = {
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
-
- ram_pointer = (volatile u32 *)start_addr;
-
- for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
- /*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
-
- /*
- * De-assert 'start' parameter.
- */
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- /*
- * Set 'wr_dqs_shift'
- */
- mtdcr(ddrcfga, DDR0_09);
- val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
- | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
- mtdcr(ddrcfgd, val);
-
- /*
- * Set 'dqs_out_shift' = wr_dqs_shift + 32
- */
- dqs_out_shift = wr_dqs_shift + 32;
- mtdcr(ddrcfga, DDR0_22);
- val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
- | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
- mtdcr(ddrcfgd, val);
-
- passing_cases = 0;
-
- for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
- /*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
- /*
- * Set 'dll_dqs_delay_X'.
- */
- /* dll_dqs_delay_0 */
- mtdcr(ddrcfga, DDR0_17);
- val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
- | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* dll_dqs_delay_1 to dll_dqs_delay_4 */
- mtdcr(ddrcfga, DDR0_18);
- val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
- | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* dll_dqs_delay_5 to dll_dqs_delay_8 */
- mtdcr(ddrcfga, DDR0_19);
- val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
- | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
-
- ppcMsync();
- ppcMbar();
-
- /*
- * Assert 'start' parameter.
- */
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
- mtdcr(ddrcfgd, val);
-
- ppcMsync();
- ppcMbar();
-
- /*
- * Wait for the DCC master delay line to finish calibration
- */
- if (wait_for_dlllock() != 0) {
- printf("dlllock did not occur !!!\n");
- printf("denali_core_search_data_eye!!!\n");
- printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
- wr_dqs_shift, dll_dqs_delay_X);
- hang();
- }
- ppcMsync();
- ppcMbar();
-
- if (wait_for_dram_init_complete() != 0) {
- printf("dram init complete did not occur !!!\n");
- printf("denali_core_search_data_eye!!!\n");
- printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
- wr_dqs_shift, dll_dqs_delay_X);
- hang();
- }
- udelay(100); /* wait 100us to ensure init is really completed !!! */
-
- /* write values */
- for (j=0; j<NUM_TRIES; j++) {
- ram_pointer[j] = test[j];
-
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
- }
-
- /* read values back */
- for (j=0; j<NUM_TRIES; j++) {
- for (k=0; k<NUM_READS; k++) {
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-
- if (ram_pointer[j] != test[j])
- break;
- }
-
- /* read error */
- if (k != NUM_READS)
- break;
- }
-
- /* See if the dll_dqs_delay_X value passed.*/
- if (j < NUM_TRIES) {
- /* Failed */
- passing_cases = 0;
- /* break; */
- } else {
- /* Passed */
- if (passing_cases == 0)
- dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
- passing_cases++;
- if (passing_cases >= max_passing_cases) {
- max_passing_cases = passing_cases;
- wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
- dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
- dll_dqs_delay_X_end_window = dll_dqs_delay_X;
- }
- }
-
- /*
- * De-assert 'start' parameter.
- */
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
-
- } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
-
- /*
- * Largest passing window is now detected.
- */
-
- /* Compute dll_dqs_delay_X value */
- dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
- wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
-
- debug("DQS calibration - Window detected:\n");
- debug("max_passing_cases = %d\n", max_passing_cases);
- debug("wr_dqs_shift = %d\n", wr_dqs_shift);
- debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X);
- debug("dll_dqs_delay_X window = %d - %d\n",
- dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
-
- /*
- * De-assert 'start' parameter.
- */
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- /*
- * Set 'wr_dqs_shift'
- */
- mtdcr(ddrcfga, DDR0_09);
- val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
- | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
- mtdcr(ddrcfgd, val);
- debug("DDR0_09=0x%08lx\n", val);
-
- /*
- * Set 'dqs_out_shift' = wr_dqs_shift + 32
- */
- dqs_out_shift = wr_dqs_shift + 32;
- mtdcr(ddrcfga, DDR0_22);
- val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
- | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
- mtdcr(ddrcfgd, val);
- debug("DDR0_22=0x%08lx\n", val);
-
- /*
- * Set 'dll_dqs_delay_X'.
- */
- /* dll_dqs_delay_0 */
- mtdcr(ddrcfga, DDR0_17);
- val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
- | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_17=0x%08lx\n", val);
-
- /* dll_dqs_delay_1 to dll_dqs_delay_4 */
- mtdcr(ddrcfga, DDR0_18);
- val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
- | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_18=0x%08lx\n", val);
-
- /* dll_dqs_delay_5 to dll_dqs_delay_8 */
- mtdcr(ddrcfga, DDR0_19);
- val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
- | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_19=0x%08lx\n", val);
-
- /*
- * Assert 'start' parameter.
- */
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
- mtdcr(ddrcfgd, val);
-
- ppcMsync();
- ppcMbar();
-
- /*
- * Wait for the DCC master delay line to finish calibration
- */
- if (wait_for_dlllock() != 0) {
- printf("dlllock did not occur !!!\n");
- hang();
- }
- ppcMsync();
- ppcMbar();
-
- if (wait_for_dram_init_complete() != 0) {
- printf("dram init complete did not occur !!!\n");
- hang();
- }
- udelay(100); /* wait 100us to ensure init is really completed !!! */
-}
-#endif /* CONFIG_DDR_DATA_EYE */
-
#ifdef CONFIG_DDR_ECC
static void wait_ddr_idle(void)
{
mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
#endif
- wait_for_dlllock();
+ denali_wait_for_dlllock();
+
+#if defined(CONFIG_DDR_DATA_EYE)
+ /* -----------------------------------------------------------+
+ * Perform data eye search if requested.
+ * ----------------------------------------------------------*/
+ program_tlb(0, CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20,
+ TLB_WORD2_I_ENABLE);
+ denali_core_search_data_eye();
+ remove_tlb(CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20);
+#endif
/*
* Program tlb entries for this size (dynamic)
*/
- program_tlb(0, 0, CFG_MBYTES_SDRAM << 20, MY_TLB_WORD2_I_ENABLE);
+ program_tlb(0, CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20,
+ MY_TLB_WORD2_I_ENABLE);
/*
* Setup 2nd TLB with same physical address but different virtual address
*/
program_tlb(0, CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0);
-#ifdef CONFIG_DDR_DATA_EYE
- /*
- * Perform data eye search if requested.
- */
- denali_core_search_data_eye(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20);
-#endif
-
#ifdef CONFIG_DDR_ECC
/*
* If ECC is enabled, initialize the parity bits.
+++ /dev/null
-/*
- * (C) Copyright 2006
- * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
- * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
- * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SPD_SDRAM_DENALI_H_
-#define _SPD_SDRAM_DENALI_H_
-
-#define ppcMsync sync
-#define ppcMbar eieio
-
-/* General definitions */
-#define MAX_SPD_BYTE 128 /* highest SPD byte # to read */
-#define DENALI_REG_NUMBER 45 /* 45 Regs in PPC440EPx Denali Core */
-#define SUPPORTED_DIMMS_NB 7 /* Number of supported DIMM modules types */
-#define SDRAM_NONE 0 /* No DIMM detected in Slot */
-#define MAXRANKS 2 /* 2 ranks maximum */
-
-/* Supported PLB Frequencies */
-#define PLB_FREQ_133MHZ 133333333
-#define PLB_FREQ_152MHZ 152000000
-#define PLB_FREQ_160MHZ 160000000
-#define PLB_FREQ_166MHZ 166666666
-
-/* Denali Core Registers */
-#define SDRAM_DCR_BASE 0x10
-
-#define DDR_DCR_BASE 0x10
-#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */
-#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */
-
-/*-----------------------------------------------------------------------------+
- | Values for ddrcfga register - indirect addressing of these regs
- +-----------------------------------------------------------------------------*/
-
-#define DDR0_00 0x00
-#define DDR0_00_INT_ACK_MASK 0x7F000000 /* Write only */
-#define DDR0_00_INT_ACK_ALL 0x7F000000
-#define DDR0_00_INT_ACK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_00_INT_ACK_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-/* Status */
-#define DDR0_00_INT_STATUS_MASK 0x00FF0000 /* Read only */
-/* Bit0. A single access outside the defined PHYSICAL memory space detected. */
-#define DDR0_00_INT_STATUS_BIT0 0x00010000
-/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */
-#define DDR0_00_INT_STATUS_BIT1 0x00020000
-/* Bit2. Single correctable ECC event detected */
-#define DDR0_00_INT_STATUS_BIT2 0x00040000
-/* Bit3. Multiple correctable ECC events detected. */
-#define DDR0_00_INT_STATUS_BIT3 0x00080000
-/* Bit4. Single uncorrectable ECC event detected. */
-#define DDR0_00_INT_STATUS_BIT4 0x00100000
-/* Bit5. Multiple uncorrectable ECC events detected. */
-#define DDR0_00_INT_STATUS_BIT5 0x00200000
-/* Bit6. DRAM initialization complete. */
-#define DDR0_00_INT_STATUS_BIT6 0x00400000
-/* Bit7. Logical OR of all lower bits. */
-#define DDR0_00_INT_STATUS_BIT7 0x00800000
-
-#define DDR0_00_INT_STATUS_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_00_INT_STATUS_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_00_DLL_INCREMENT_MASK 0x00007F00
-#define DDR0_00_DLL_INCREMENT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_00_DLL_INCREMENT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_00_DLL_START_POINT_MASK 0x0000007F
-#define DDR0_00_DLL_START_POINT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_00_DLL_START_POINT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-
-#define DDR0_01 0x01
-#define DDR0_01_PLB0_DB_CS_LOWER_MASK 0x1F000000
-#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_01_PLB0_DB_CS_UPPER_MASK 0x001F0000
-#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
-#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n) ((((unsigned long)(n))>>16)&0x1F)
-#define DDR0_01_OUT_OF_RANGE_TYPE_MASK 0x00000700 /* Read only */
-#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
-#define DDR0_01_INT_MASK_MASK 0x000000FF
-#define DDR0_01_INT_MASK_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_01_INT_MASK_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
-#define DDR0_01_INT_MASK_ALL_ON 0x000000FF
-#define DDR0_01_INT_MASK_ALL_OFF 0x00000000
-
-#define DDR0_02 0x02
-#define DDR0_02_MAX_CS_REG_MASK 0x02000000 /* Read only */
-#define DDR0_02_MAX_CS_REG_ENCODE(n) ((((unsigned long)(n))&0x2)<<24)
-#define DDR0_02_MAX_CS_REG_DECODE(n) ((((unsigned long)(n))>>24)&0x2)
-#define DDR0_02_MAX_COL_REG_MASK 0x000F0000 /* Read only */
-#define DDR0_02_MAX_COL_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<16)
-#define DDR0_02_MAX_COL_REG_DECODE(n) ((((unsigned long)(n))>>16)&0xF)
-#define DDR0_02_MAX_ROW_REG_MASK 0x00000F00 /* Read only */
-#define DDR0_02_MAX_ROW_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_02_MAX_ROW_REG_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_02_START_MASK 0x00000001
-#define DDR0_02_START_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_02_START_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-#define DDR0_02_START_OFF 0x00000000
-#define DDR0_02_START_ON 0x00000001
-
-#define DDR0_03 0x03
-#define DDR0_03_BSTLEN_MASK 0x07000000
-#define DDR0_03_BSTLEN_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_03_BSTLEN_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_03_CASLAT_MASK 0x00070000
-#define DDR0_03_CASLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_03_CASLAT_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_03_CASLAT_LIN_MASK 0x00000F00
-#define DDR0_03_CASLAT_LIN_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_03_CASLAT_LIN_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_03_INITAREF_MASK 0x0000000F
-#define DDR0_03_INITAREF_ENCODE(n) ((((unsigned long)(n))&0xF)<<0)
-#define DDR0_03_INITAREF_DECODE(n) ((((unsigned long)(n))>>0)&0xF)
-
-#define DDR0_04 0x04
-#define DDR0_04_TRC_MASK 0x1F000000
-#define DDR0_04_TRC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_04_TRC_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_04_TRRD_MASK 0x00070000
-#define DDR0_04_TRRD_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_04_TRRD_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_04_TRTP_MASK 0x00000700
-#define DDR0_04_TRTP_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_04_TRTP_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
-
-#define DDR0_05 0x05
-#define DDR0_05_TMRD_MASK 0x1F000000
-#define DDR0_05_TMRD_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_05_TMRD_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_05_TEMRS_MASK 0x00070000
-#define DDR0_05_TEMRS_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_05_TEMRS_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_05_TRP_MASK 0x00000F00
-#define DDR0_05_TRP_ENCODE(n) ((((unsigned long)(n))&0xF)<<8)
-#define DDR0_05_TRP_DECODE(n) ((((unsigned long)(n))>>8)&0xF)
-#define DDR0_05_TRAS_MIN_MASK 0x000000FF
-#define DDR0_05_TRAS_MIN_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_05_TRAS_MIN_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
-
-#define DDR0_06 0x06
-#define DDR0_06_WRITEINTERP_MASK 0x01000000
-#define DDR0_06_WRITEINTERP_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_06_WRITEINTERP_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_06_TWTR_MASK 0x00070000
-#define DDR0_06_TWTR_ENCODE(n) ((((unsigned long)(n))&0x7)<<16)
-#define DDR0_06_TWTR_DECODE(n) ((((unsigned long)(n))>>16)&0x7)
-#define DDR0_06_TDLL_MASK 0x0000FF00
-#define DDR0_06_TDLL_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_06_TDLL_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
-#define DDR0_06_TRFC_MASK 0x0000007F
-#define DDR0_06_TRFC_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_06_TRFC_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_07 0x07
-#define DDR0_07_NO_CMD_INIT_MASK 0x01000000
-#define DDR0_07_NO_CMD_INIT_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_07_NO_CMD_INIT_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_07_TFAW_MASK 0x001F0000
-#define DDR0_07_TFAW_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
-#define DDR0_07_TFAW_DECODE(n) ((((unsigned long)(n))>>16)&0x1F)
-#define DDR0_07_AUTO_REFRESH_MODE_MASK 0x00000100
-#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
-#define DDR0_07_AREFRESH_MASK 0x00000001
-#define DDR0_07_AREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_07_AREFRESH_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_08 0x08
-#define DDR0_08_WRLAT_MASK 0x07000000
-#define DDR0_08_WRLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_08_WRLAT_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_08_TCPD_MASK 0x00FF0000
-#define DDR0_08_TCPD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_08_TCPD_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_08_DQS_N_EN_MASK 0x00000100
-#define DDR0_08_DQS_N_EN_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_08_DQS_N_EN_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
-#define DDR0_08_DDRII_SDRAM_MODE_MASK 0x00000001
-#define DDR0_08_DDRII_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_08_DDRII_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_09 0x09
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK 0x1F000000
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_09_RTT_0_MASK 0x00030000
-#define DDR0_09_RTT_0_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
-#define DDR0_09_RTT_0_DECODE(n) ((((unsigned long)(n))>>16)&0x3)
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK 0x00007F00
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_09_WR_DQS_SHIFT_MASK 0x0000007F
-#define DDR0_09_WR_DQS_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_09_WR_DQS_SHIFT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_10 0x0A
-#define DDR0_10_WRITE_MODEREG_MASK 0x00010000 /* Write only */
-#define DDR0_10_WRITE_MODEREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_10_WRITE_MODEREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_10_CS_MAP_MASK 0x00000300
-#define DDR0_10_CS_MAP_NO_MEM 0x00000000
-#define DDR0_10_CS_MAP_RANK0_INSTALLED 0x00000100
-#define DDR0_10_CS_MAP_RANK1_INSTALLED 0x00000200
-#define DDR0_10_CS_MAP_ENCODE(n) ((((unsigned long)(n))&0x3)<<8)
-#define DDR0_10_CS_MAP_DECODE(n) ((((unsigned long)(n))>>8)&0x3)
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK 0x0000001F
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0)
-#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F)
-
-#define DDR0_11 0x0B
-#define DDR0_11_SREFRESH_MASK 0x01000000
-#define DDR0_11_SREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_11_SREFRESH_DECODE(n) ((((unsigned long)(n))>>24)&0x1F)
-#define DDR0_11_TXSNR_MASK 0x00FF0000
-#define DDR0_11_TXSNR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_11_TXSNR_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_11_TXSR_MASK 0x0000FF00
-#define DDR0_11_TXSR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_11_TXSR_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
-
-#define DDR0_12 0x0C
-#define DDR0_12_TCKE_MASK 0x0000007
-#define DDR0_12_TCKE_ENCODE(n) ((((unsigned long)(n))&0x7)<<0)
-#define DDR0_12_TCKE_DECODE(n) ((((unsigned long)(n))>>0)&0x7)
-
-#define DDR0_13 0x0D
-
-#define DDR0_14 0x0E
-#define DDR0_14_DLL_BYPASS_MODE_MASK 0x01000000
-#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<24)
-#define DDR0_14_DLL_BYPASS_MODE_DECODE(n) ((((unsigned long)(n))>>24)&0x1)
-#define DDR0_14_REDUC_MASK 0x00010000
-#define DDR0_14_REDUC_64BITS 0x00000000
-#define DDR0_14_REDUC_32BITS 0x00010000
-#define DDR0_14_REDUC_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_14_REDUC_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_14_REG_DIMM_ENABLE_MASK 0x00000100
-#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8)
-#define DDR0_14_REG_DIMM_ENABLE_DECODE(n) ((((unsigned long)(n))>>8)&0x1)
-
-#define DDR0_15 0x0F
-
-#define DDR0_16 0x10
-
-#define DDR0_17 0x11
-#define DDR0_17_DLL_DQS_DELAY_0_MASK 0x7F000000
-#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */
-#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000
-#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000
-#define DDR0_17_DLLLOCKREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16)
-#define DDR0_17_DLLLOCKREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1)
-#define DDR0_17_DLL_LOCK_MASK 0x00007F00 /* Read only */
-#define DDR0_17_DLL_LOCK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_17_DLL_LOCK_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-
-#define DDR0_18 0x12
-#define DDR0_18_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
-#define DDR0_18_DLL_DQS_DELAY_4_MASK 0x7F000000
-#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_3_MASK 0x007F0000
-#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_2_MASK 0x00007F00
-#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_18_DLL_DQS_DELAY_1_MASK 0x0000007F
-#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_19 0x13
-#define DDR0_19_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F
-#define DDR0_19_DLL_DQS_DELAY_8_MASK 0x7F000000
-#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_7_MASK 0x007F0000
-#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_6_MASK 0x00007F00
-#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_19_DLL_DQS_DELAY_5_MASK 0x0000007F
-#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_20 0x14
-#define DDR0_20_DLL_DQS_BYPASS_3_MASK 0x7F000000
-#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_2_MASK 0x007F0000
-#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_1_MASK 0x00007F00
-#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_20_DLL_DQS_BYPASS_0_MASK 0x0000007F
-#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_21 0x15
-#define DDR0_21_DLL_DQS_BYPASS_7_MASK 0x7F000000
-#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24)
-#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n) ((((unsigned long)(n))>>24)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_6_MASK 0x007F0000
-#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_5_MASK 0x00007F00
-#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_21_DLL_DQS_BYPASS_4_MASK 0x0000007F
-#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-#define DDR0_22 0x16
-/* ECC */
-#define DDR0_22_CTRL_RAW_MASK 0x03000000
-#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000 /* ECC not being used */
-#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000 /* ECC checking is on, but no attempts to correct*/
-#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000 /* No ECC RAM storage available */
-#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000 /* ECC checking and correcting on */
-#define DDR0_22_CTRL_RAW_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_22_CTRL_RAW_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
-
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F)
-#define DDR0_22_DQS_OUT_SHIFT_MASK 0x00007F00
-#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8)
-#define DDR0_22_DQS_OUT_SHIFT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F)
-#define DDR0_22_DLL_DQS_BYPASS_8_MASK 0x0000007F
-#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0)
-#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n) ((((unsigned long)(n))>>0)&0x7F)
-
-
-#define DDR0_23 0x17
-#define DDR0_23_ODT_RD_MAP_CS0_MASK 0x03000000
-#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
-#define DDR0_23_ECC_C_SYND_MASK 0x00FF0000 /* Read only */
-#define DDR0_23_ECC_C_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16)
-#define DDR0_23_ECC_C_SYND_DECODE(n) ((((unsigned long)(n))>>16)&0xFF)
-#define DDR0_23_ECC_U_SYND_MASK 0x0000FF00 /* Read only */
-#define DDR0_23_ECC_U_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8)
-#define DDR0_23_ECC_U_SYND_DECODE(n) ((((unsigned long)(n))>>8)&0xFF)
-#define DDR0_23_FWC_MASK 0x00000001 /* Write only */
-#define DDR0_23_FWC_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_23_FWC_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_24 0x18
-#define DDR0_24_RTT_PAD_TERMINATION_MASK 0x03000000
-#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3)
-#define DDR0_24_ODT_WR_MAP_CS1_MASK 0x00030000
-#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
-#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>16)&0x3)
-#define DDR0_24_ODT_RD_MAP_CS1_MASK 0x00000300
-#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<8)
-#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>8)&0x3)
-#define DDR0_24_ODT_WR_MAP_CS0_MASK 0x00000003
-#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<0)
-#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>0)&0x3)
-
-#define DDR0_25 0x19
-#define DDR0_25_VERSION_MASK 0xFFFF0000 /* Read only */
-#define DDR0_25_VERSION_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16)
-#define DDR0_25_VERSION_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF)
-#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK 0x000003FF /* Read only */
-#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
-#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
-
-#define DDR0_26 0x1A
-#define DDR0_26_TRAS_MAX_MASK 0xFFFF0000
-#define DDR0_26_TRAS_MAX_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16)
-#define DDR0_26_TRAS_MAX_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF)
-#define DDR0_26_TREF_MASK 0x00003FFF
-#define DDR0_26_TREF_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0)
-#define DDR0_26_TREF_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF)
-
-#define DDR0_27 0x1B
-#define DDR0_27_EMRS_DATA_MASK 0x3FFF0000
-#define DDR0_27_EMRS_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16)
-#define DDR0_27_EMRS_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF)
-#define DDR0_27_TINIT_MASK 0x0000FFFF
-#define DDR0_27_TINIT_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0)
-#define DDR0_27_TINIT_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF)
-
-#define DDR0_28 0x1C
-#define DDR0_28_EMRS3_DATA_MASK 0x3FFF0000
-#define DDR0_28_EMRS3_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16)
-#define DDR0_28_EMRS3_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF)
-#define DDR0_28_EMRS2_DATA_MASK 0x00003FFF
-#define DDR0_28_EMRS2_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0)
-#define DDR0_28_EMRS2_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF)
-
-#define DDR0_29 0x1D
-
-#define DDR0_30 0x1E
-
-#define DDR0_31 0x1F
-#define DDR0_31_XOR_CHECK_BITS_MASK 0x0000FFFF
-#define DDR0_31_XOR_CHECK_BITS_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0)
-#define DDR0_31_XOR_CHECK_BITS_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF)
-
-#define DDR0_32 0x20
-#define DDR0_32_OUT_OF_RANGE_ADDR_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_33 0x21
-#define DDR0_33_OUT_OF_RANGE_ADDR_MASK 0x00000001 /* Read only */
-#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_34 0x22
-#define DDR0_34_ECC_U_ADDR_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_34_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_34_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_35 0x23
-#define DDR0_35_ECC_U_ADDR_MASK 0x00000001 /* Read only */
-#define DDR0_35_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_35_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_36 0x24
-#define DDR0_36_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_36_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_36_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_37 0x25
-#define DDR0_37_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_37_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_37_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_38 0x26
-#define DDR0_38_ECC_C_ADDR_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_38_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_38_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_39 0x27
-#define DDR0_39_ECC_C_ADDR_MASK 0x00000001 /* Read only */
-#define DDR0_39_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_39_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_40 0x28
-#define DDR0_40_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_40_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_40_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_41 0x29
-#define DDR0_41_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */
-#define DDR0_41_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0)
-#define DDR0_41_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF)
-
-#define DDR0_42 0x2A
-#define DDR0_42_ADDR_PINS_MASK 0x07000000
-#define DDR0_42_ADDR_PINS_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_42_ADDR_PINS_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_42_CASLAT_LIN_GATE_MASK 0x0000000F
-#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n) ((((unsigned long)(n))&0xF)<<0)
-#define DDR0_42_CASLAT_LIN_GATE_DECODE(n) ((((unsigned long)(n))>>0)&0xF)
-
-#define DDR0_43 0x2B
-#define DDR0_43_TWR_MASK 0x07000000
-#define DDR0_43_TWR_ENCODE(n) ((((unsigned long)(n))&0x7)<<24)
-#define DDR0_43_TWR_DECODE(n) ((((unsigned long)(n))>>24)&0x7)
-#define DDR0_43_APREBIT_MASK 0x000F0000
-#define DDR0_43_APREBIT_ENCODE(n) ((((unsigned long)(n))&0xF)<<16)
-#define DDR0_43_APREBIT_DECODE(n) ((((unsigned long)(n))>>16)&0xF)
-#define DDR0_43_COLUMN_SIZE_MASK 0x00000700
-#define DDR0_43_COLUMN_SIZE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8)
-#define DDR0_43_COLUMN_SIZE_DECODE(n) ((((unsigned long)(n))>>8)&0x7)
-#define DDR0_43_EIGHT_BANK_MODE_MASK 0x00000001
-#define DDR0_43_EIGHT_BANK_MODE_8_BANKS 0x00000001
-#define DDR0_43_EIGHT_BANK_MODE_4_BANKS 0x00000000
-#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<0)
-#define DDR0_43_EIGHT_BANK_MODE_DECODE(n) ((((unsigned long)(n))>>0)&0x1)
-
-#define DDR0_44 0x2C
-#define DDR0_44_TRCD_MASK 0x000000FF
-#define DDR0_44_TRCD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
-#define DDR0_44_TRCD_DECODE(n) ((((unsigned long)(n))>>0)&0xFF)
-
-#endif /* _SPD_SDRAM_DENALI_H_ */
#include <pci.h>
#include <asm/mpc8349_pci.h>
#include <i2c.h>
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <fdt_support.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
}
-#ifdef CONFIG_OF_FLAT_TREE
-void
-ft_pci_setup(void *blob, bd_t *bd)
+#if defined(CONFIG_OF_LIBFDT)
+void ft_pci_setup(void *blob, bd_t *bd)
{
- u32 *p;
- int len;
-
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
- if (p != NULL) {
- p[0] = pci_hose[0].first_busno;
- p[1] = pci_hose[0].last_busno;
+ int nodeoffset;
+ int tmp[2];
+ const char *path;
+
+ nodeoffset = fdt_path_offset(blob, "/aliases");
+ if (nodeoffset >= 0) {
+ path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
}
-
#ifdef CONFIG_MPC83XX_PCI2
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
- if (p != NULL) {
- p[0] = pci_hose[1].first_busno;
- p[1] = pci_hose[1].last_busno;
- }
+ path = fdt_getprop(blob, nodeoffset, "pci1", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
#endif
+ }
}
-#endif /* CONFIG_OF_FLAT_TREE */
+#endif /* CONFIG_OF_LIBFDT */
#endif /* CONFIG_PCI */
#include <i2c.h>
#include <spd.h>
#include <miiphy.h>
-#include <command.h>
#if defined(CONFIG_SPD_EEPROM)
#include <spd_sdram.h>
#endif
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
#endif
int fixed_sdram(void);
}
#endif
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
-/*
- * ECC user commands
- */
-void ecc_print_status(void)
-{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
-
- printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
-
- /* Interrupts */
- printf("Memory Error Interrupt Enable:\n");
- printf(" Multiple-Bit Error Interrupt Enable: %d\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
- printf(" Single-Bit Error Interrupt Enable: %d\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
- printf(" Memory Select Error Interrupt Enable: %d\n\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
-
- /* Error disable */
- printf("Memory Error Disable:\n");
- printf(" Multiple-Bit Error Disable: %d\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
- printf(" Sinle-Bit Error Disable: %d\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
- printf(" Memory Select Error Disable: %d\n\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
-
- /* Error injection */
- printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
- ddr->data_err_inject_hi, ddr->data_err_inject_lo);
-
- printf("Memory Data Path Error Injection Mask ECC:\n");
- printf(" ECC Mirror Byte: %d\n",
- (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
- printf(" ECC Injection Enable: %d\n",
- (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
- printf(" ECC Error Injection Mask: 0x%02x\n\n",
- ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
-
- /* SBE counter/threshold */
- printf("Memory Single-Bit Error Management (0..255):\n");
- printf(" Single-Bit Error Threshold: %d\n",
- (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
- printf(" Single-Bit Error Counter: %d\n\n",
- (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
-
- /* Error detect */
- printf("Memory Error Detect:\n");
- printf(" Multiple Memory Errors: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
- printf(" Multiple-Bit Error: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
- printf(" Single-Bit Error: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
- printf(" Memory Select Error: %d\n\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
-
- /* Capture data */
- printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
- printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
- ddr->capture_data_hi, ddr->capture_data_lo);
- printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
- ddr->capture_ecc & CAPTURE_ECC_ECE);
-
- printf("Memory Error Attributes Capture:\n");
- printf(" Data Beat Number: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> ECC_CAPT_ATTR_BNUM_SHIFT);
- printf(" Transaction Size: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> ECC_CAPT_ATTR_TSIZ_SHIFT);
- printf(" Transaction Source: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> ECC_CAPT_ATTR_TSRC_SHIFT);
- printf(" Transaction Type: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> ECC_CAPT_ATTR_TTYP_SHIFT);
- printf(" Error Information Valid: %d\n\n",
- ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
-}
-
-int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
- volatile u32 val;
- u64 *addr, count, val64;
- register u64 *i;
-
- if (argc > 4) {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-
- if (argc == 2) {
- if (strcmp(argv[1], "status") == 0) {
- ecc_print_status();
- return 0;
- } else if (strcmp(argv[1], "captureclear") == 0) {
- ddr->capture_address = 0;
- ddr->capture_data_hi = 0;
- ddr->capture_data_lo = 0;
- ddr->capture_ecc = 0;
- ddr->capture_attributes = 0;
- return 0;
- }
- }
-
- if (argc == 3) {
- if (strcmp(argv[1], "sbecnt") == 0) {
- val = simple_strtoul(argv[2], NULL, 10);
- if (val > 255) {
- printf("Incorrect Counter value, should be 0..255\n");
- return 1;
- }
-
- val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
- val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
-
- ddr->err_sbe = val;
- return 0;
- } else if (strcmp(argv[1], "sbethr") == 0) {
- val = simple_strtoul(argv[2], NULL, 10);
- if (val > 255) {
- printf("Incorrect Counter value, should be 0..255\n");
- return 1;
- }
-
- val = (val << ECC_ERROR_MAN_SBET_SHIFT);
- val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
-
- ddr->err_sbe = val;
- return 0;
- } else if (strcmp(argv[1], "errdisable") == 0) {
- val = ddr->err_disable;
-
- if (strcmp(argv[2], "+sbe") == 0) {
- val |= ECC_ERROR_DISABLE_SBED;
- } else if (strcmp(argv[2], "+mbe") == 0) {
- val |= ECC_ERROR_DISABLE_MBED;
- } else if (strcmp(argv[2], "+mse") == 0) {
- val |= ECC_ERROR_DISABLE_MSED;
- } else if (strcmp(argv[2], "+all") == 0) {
- val |= (ECC_ERROR_DISABLE_SBED |
- ECC_ERROR_DISABLE_MBED |
- ECC_ERROR_DISABLE_MSED);
- } else if (strcmp(argv[2], "-sbe") == 0) {
- val &= ~ECC_ERROR_DISABLE_SBED;
- } else if (strcmp(argv[2], "-mbe") == 0) {
- val &= ~ECC_ERROR_DISABLE_MBED;
- } else if (strcmp(argv[2], "-mse") == 0) {
- val &= ~ECC_ERROR_DISABLE_MSED;
- } else if (strcmp(argv[2], "-all") == 0) {
- val &= ~(ECC_ERROR_DISABLE_SBED |
- ECC_ERROR_DISABLE_MBED |
- ECC_ERROR_DISABLE_MSED);
- } else {
- printf("Incorrect err_disable field\n");
- return 1;
- }
-
- ddr->err_disable = val;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
- return 0;
- } else if (strcmp(argv[1], "errdetectclr") == 0) {
- val = ddr->err_detect;
-
- if (strcmp(argv[2], "mme") == 0) {
- val |= ECC_ERROR_DETECT_MME;
- } else if (strcmp(argv[2], "sbe") == 0) {
- val |= ECC_ERROR_DETECT_SBE;
- } else if (strcmp(argv[2], "mbe") == 0) {
- val |= ECC_ERROR_DETECT_MBE;
- } else if (strcmp(argv[2], "mse") == 0) {
- val |= ECC_ERROR_DETECT_MSE;
- } else if (strcmp(argv[2], "all") == 0) {
- val |= (ECC_ERROR_DETECT_MME |
- ECC_ERROR_DETECT_MBE |
- ECC_ERROR_DETECT_SBE |
- ECC_ERROR_DETECT_MSE);
- } else {
- printf("Incorrect err_detect field\n");
- return 1;
- }
-
- ddr->err_detect = val;
- return 0;
- } else if (strcmp(argv[1], "injectdatahi") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
-
- ddr->data_err_inject_hi = val;
- return 0;
- } else if (strcmp(argv[1], "injectdatalo") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
-
- ddr->data_err_inject_lo = val;
- return 0;
- } else if (strcmp(argv[1], "injectecc") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
- if (val > 0xff) {
- printf("Incorrect ECC inject mask, should be 0x00..0xff\n");
- return 1;
- }
- val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
-
- ddr->ecc_err_inject = val;
- return 0;
- } else if (strcmp(argv[1], "inject") == 0) {
- val = ddr->ecc_err_inject;
-
- if (strcmp(argv[2], "en") == 0)
- val |= ECC_ERR_INJECT_EIEN;
- else if (strcmp(argv[2], "dis") == 0)
- val &= ~ECC_ERR_INJECT_EIEN;
- else
- printf("Incorrect command\n");
-
- ddr->ecc_err_inject = val;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
- return 0;
- } else if (strcmp(argv[1], "mirror") == 0) {
- val = ddr->ecc_err_inject;
-
- if (strcmp(argv[2], "en") == 0)
- val |= ECC_ERR_INJECT_EMB;
- else if (strcmp(argv[2], "dis") == 0)
- val &= ~ECC_ERR_INJECT_EMB;
- else
- printf("Incorrect command\n");
-
- ddr->ecc_err_inject = val;
- return 0;
- }
- }
-
- if (argc == 4) {
- if (strcmp(argv[1], "test") == 0) {
- addr = (u64 *)simple_strtoul(argv[2], NULL, 16);
- count = simple_strtoul(argv[3], NULL, 16);
-
- if ((u32)addr % 8) {
- printf("Address not alligned on double word boundary\n");
- return 1;
- }
-
- disable_interrupts();
- icache_disable();
-
- for (i = addr; i < addr + count; i++) {
- /* enable injects */
- ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
-
- /* write memory location injecting errors */
- *i = 0x1122334455667788ULL;
- __asm__ __volatile__ ("sync");
-
- /* disable injects */
- ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
-
- /* read data, this generates ECC error */
- val64 = *i;
- __asm__ __volatile__ ("sync");
-
- /* disable errors for ECC */
- ddr->err_disable |= ~ECC_ERROR_ENABLE;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
-
- /* re-initialize memory, write the location again
- * NOT injecting errors this time */
- *i = 0xcafecafecafecafeULL;
- __asm__ __volatile__ ("sync");
-
- /* enable errors for ECC */
- ddr->err_disable &= ECC_ERROR_ENABLE;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
- }
-
- icache_enable();
- enable_interrupts();
-
- return 0;
- }
- }
-
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
-}
-
-U_BOOT_CMD(
- ecc, 4, 0, do_ecc,
- "ecc - support for DDR ECC features\n",
- "status - print out status info\n"
- "ecc captureclear - clear capture regs data\n"
- "ecc sbecnt <val> - set Single-Bit Error counter\n"
- "ecc sbethr <val> - set Single-Bit Threshold\n"
- "ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n"
- " [-|+]sbe - Single-Bit Error\n"
- " [-|+]mbe - Multiple-Bit Error\n"
- " [-|+]mse - Memory Select Error\n"
- " [-|+]all - all errors\n"
- "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
- " mme - Multiple Memory Errors\n"
- " sbe - Single-Bit Error\n"
- " mbe - Multiple-Bit Error\n"
- " mse - Memory Select Error\n"
- " all - all errors\n"
- "ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n"
- "ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n"
- "ecc injectecc <ecc> - set ECC Error Injection Mask\n"
- "ecc inject <en|dis> - enable/disable error injection\n"
- "ecc mirror <en|dis> - enable/disable mirror byte\n"
- "ecc test <addr> <cnt> - test mem region:\n"
- " - enables injects\n"
- " - writes pattern injecting errors\n"
- " - disables injects\n"
- " - reads pattern back, generates error\n"
- " - re-inits memory"
-);
-#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
-
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
-
+ ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
- ft_cpu_setup(blob, bd);
-
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
}
#endif
#include <common.h> /* core U-Boot definitions */
#include <ACEX1K.h> /* ACEX device family */
-#if (CONFIG_FPGA & (CFG_ALTERA | CFG_ACEX1K))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA) && defined(CONFIG_FPGA_ACEX1K)
/* Define FPGA_DEBUG to get debug printf's */
#ifdef FPGA_DEBUG
}
-#endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_ACEX1K)) */
+#endif /* CONFIG_FPGA && CONFIG_FPGA_ALTERA && CONFIG_FPGA_ACEX1K */
COBJS-y += cmd_sata.o
COBJS-$(CONFIG_CMD_SCSI) += cmd_scsi.o
COBJS-$(CONFIG_CMD_SPI) += cmd_spi.o
+COBJS-$(CONFIG_CMD_TERMINAL) += cmd_terminal.o
COBJS-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o
COBJS-$(CONFIG_CMD_USB) += cmd_usb.o
COBJS-y += cmd_vfd.o
#define PRINTF(fmt,args...)
#endif
-#if (CONFIG_FPGA & CFG_FPGA_ALTERA)
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA)
/* Local Static Functions */
static int altera_validate (Altera_desc * desc, char *fn);
switch (desc->family) {
case Altera_ACEX1K:
case Altera_CYC2:
-#if (CONFIG_FPGA & CFG_ACEX1K)
+#if defined(CONFIG_FPGA_ACEX1K)
PRINTF ("%s: Launching the ACEX1K Loader...\n",
__FUNCTION__);
ret_val = ACEX1K_load (desc, buf, bsize);
-#elif (CONFIG_FPGA & CFG_CYCLON2)
+#elif defined CONFIG_FPGA_CYCLON2
PRINTF ("%s: Launching the CYCLON II Loader...\n",
__FUNCTION__);
ret_val = CYC2_load (desc, buf, bsize);
} else {
switch (desc->family) {
case Altera_ACEX1K:
-#if (CONFIG_FPGA & CFG_ACEX)
+#if defined(CONFIG_FPGA_ACEX)
PRINTF ("%s: Launching the ACEX1K Reader...\n",
__FUNCTION__);
ret_val = ACEX1K_dump (desc, buf, bsize);
switch (desc->family) {
case Altera_ACEX1K:
case Altera_CYC2:
-#if (CONFIG_FPGA & CFG_ACEX1K)
+#if defined(CONFIG_FPGA_ACEX1K)
ACEX1K_info (desc);
-#elif (CONFIG_FPGA & CFG_CYCLON2)
+#elif defined(CONFIG_FPGA_CYCLON2)
CYC2_info (desc);
#else
/* just in case */
} else {
switch (desc->family) {
case Altera_ACEX1K:
-#if (CONFIG_FPGA & CFG_ACEX1K)
+#if defined(CONFIG_FPGA_ACEX1K)
ret_val = ACEX1K_reloc (desc, reloc_offset);
#else
printf ("%s: No support for ACEX devices.\n",
#endif
break;
case Altera_CYC2:
-#if (CONFIG_FPGA & CFG_CYCLON2)
+#if defined(CONFIG_FPGA_CYCLON2)
ret_val = CYC2_reloc (desc, reloc_offset);
#else
printf ("%s: No support for CYCLON II devices.\n",
/* ------------------------------------------------------------------------- */
-#endif /* CONFIG_FPGA & CFG_FPGA_ALTERA */
+#endif /* CONFIG_FPGA & CONFIG_FPGA_ALTERA */
int gunzip(void *, int, unsigned char *, unsigned long *);
+/*
+ * Allocate and decompress a BMP image using gunzip().
+ *
+ * Returns a pointer to the decompressed image data. Must be freed by
+ * the caller after use.
+ *
+ * Returns NULL if decompression failed, or if the decompressed data
+ * didn't contain a valid BMP signature.
+ */
+#ifdef CONFIG_VIDEO_BMP_GZIP
+static bmp_image_t *gunzip_bmp(unsigned long addr, unsigned long *lenp)
+{
+ void *dst;
+ unsigned long len;
+ bmp_image_t *bmp;
+
+ /*
+ * Decompress bmp image
+ */
+ len = CFG_VIDEO_LOGO_MAX_SIZE;
+ dst = malloc(CFG_VIDEO_LOGO_MAX_SIZE);
+ if (dst == NULL) {
+ puts("Error: malloc in gunzip failed!\n");
+ return NULL;
+ }
+ if (gunzip(dst, CFG_VIDEO_LOGO_MAX_SIZE, (uchar *)addr, &len) != 0) {
+ free(dst);
+ return NULL;
+ }
+ if (len == CFG_VIDEO_LOGO_MAX_SIZE)
+ puts("Image could be truncated"
+ " (increase CFG_VIDEO_LOGO_MAX_SIZE)!\n");
+
+ bmp = dst;
+
+ /*
+ * Check for bmp mark 'BM'
+ */
+ if (!((bmp->header.signature[0] == 'B') &&
+ (bmp->header.signature[1] == 'M'))) {
+ free(dst);
+ return NULL;
+ }
+
+ puts("Gzipped BMP image detected!\n");
+
+ return bmp;
+}
+#else
+static bmp_image_t *gunzip_bmp(unsigned long addr)
+{
+ return NULL;
+}
+#endif
+
+
/*
* Subroutine: do_bmp
*
static int bmp_info(ulong addr)
{
bmp_image_t *bmp=(bmp_image_t *)addr;
-#ifdef CONFIG_VIDEO_BMP_GZIP
- unsigned char *dst = NULL;
- ulong len;
-#endif /* CONFIG_VIDEO_BMP_GZIP */
+ unsigned long len;
if (!((bmp->header.signature[0]=='B') &&
- (bmp->header.signature[1]=='M'))) {
+ (bmp->header.signature[1]=='M')))
+ bmp = gunzip_bmp(addr, &len);
-#ifdef CONFIG_VIDEO_BMP_GZIP
- /*
- * Decompress bmp image
- */
- len = CFG_VIDEO_LOGO_MAX_SIZE;
- dst = malloc(CFG_VIDEO_LOGO_MAX_SIZE);
- if (dst == NULL) {
- printf("Error: malloc in gunzip failed!\n");
- return(1);
- }
- if (gunzip(dst, CFG_VIDEO_LOGO_MAX_SIZE, (uchar *)addr, &len) != 0) {
- printf("There is no valid bmp file at the given address\n");
- return(1);
- }
- if (len == CFG_VIDEO_LOGO_MAX_SIZE) {
- printf("Image could be truncated (increase CFG_VIDEO_LOGO_MAX_SIZE)!\n");
- }
-
- /*
- * Set addr to decompressed image
- */
- bmp = (bmp_image_t *)dst;
-
- /*
- * Check for bmp mark 'BM'
- */
- if (!((bmp->header.signature[0] == 'B') &&
- (bmp->header.signature[1] == 'M'))) {
- printf("There is no valid bmp file at the given address\n");
- free(dst);
- return(1);
- }
-
- printf("Gzipped BMP image detected!\n");
-#else /* CONFIG_VIDEO_BMP_GZIP */
+ if (bmp == NULL) {
printf("There is no valid bmp file at the given address\n");
- return(1);
-#endif /* CONFIG_VIDEO_BMP_GZIP */
+ return 1;
}
+
printf("Image size : %d x %d\n", le32_to_cpu(bmp->header.width),
le32_to_cpu(bmp->header.height));
printf("Bits per pixel: %d\n", le16_to_cpu(bmp->header.bit_count));
printf("Compression : %d\n", le32_to_cpu(bmp->header.compression));
-#ifdef CONFIG_VIDEO_BMP_GZIP
- if (dst) {
- free(dst);
- }
-#endif /* CONFIG_VIDEO_BMP_GZIP */
+ if ((unsigned long)bmp != addr)
+ free(bmp);
return(0);
}
*/
static int bmp_display(ulong addr, int x, int y)
{
+ int ret;
+ bmp_image_t *bmp = (bmp_image_t *)addr;
+ unsigned long len;
+
+ if (!((bmp->header.signature[0]=='B') &&
+ (bmp->header.signature[1]=='M')))
+ bmp = gunzip_bmp(addr, &len);
+
+ if (!bmp) {
+ printf("There is no valid bmp file at the given address\n");
+ return 1;
+ }
+
#if defined(CONFIG_LCD)
extern int lcd_display_bitmap (ulong, int, int);
- return (lcd_display_bitmap (addr, x, y));
+ ret = lcd_display_bitmap ((unsigned long)bmp, x, y);
#elif defined(CONFIG_VIDEO)
extern int video_display_bitmap (ulong, int, int);
- return (video_display_bitmap (addr, x, y));
+
+ ret = video_display_bitmap ((unsigned long)bmp, x, y);
#else
# error bmp_display() requires CONFIG_LCD or CONFIG_VIDEO
#endif
+
+ if ((unsigned long)bmp != addr)
+ free(bmp);
+
+ return ret;
}
} else if (argv[1][0] == 's') {
char *pathp; /* path */
char *prop; /* property */
- char *newval; /* value from the user (as a string) */
int nodeoffset; /* node offset from libfdt */
static char data[SCRATCHPAD]; /* storage for the property */
int len; /* new length of the property */
int ret; /* return value */
/*
- * Parameters: Node path, property, value.
+ * Parameters: Node path, property, optional value.
*/
- if (argc < 5) {
+ if (argc < 4) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
pathp = argv[2];
prop = argv[3];
- newval = argv[4];
+ if (argc == 4) {
+ len = 0;
+ } else {
+ ret = fdt_parse_prop(pathp, prop, argv[4], data, &len);
+ if (ret != 0)
+ return ret;
+ }
nodeoffset = fdt_path_offset (fdt, pathp);
if (nodeoffset < 0) {
fdt_strerror(nodeoffset));
return 1;
}
- ret = fdt_parse_prop(pathp, prop, newval, data, &len);
- if (ret != 0)
- return ret;
ret = fdt_setprop(fdt, nodeoffset, prop, data, len);
if (ret < 0) {
#ifdef CONFIG_OF_BOARD_SETUP
"fdt boardsetup - Do board-specific set up\n"
#endif
- "fdt move <fdt> <newaddr> <length> - Copy the fdt to <addr>\n"
+ "fdt move <fdt> <newaddr> <length> - Copy the fdt to <addr> and make it active\n"
"fdt print <path> [<prop>] - Recursive print starting at <path>\n"
"fdt list <path> [<prop>] - Print one level starting at <path>\n"
"fdt set <path> <prop> [<val>] - Set <property> [to <val>]\n"
#ifdef CONFIG_OF_HAS_BD_T
"fdt bd_t - Add/replace the /bd_t branch in the tree\n"
#endif
- "Hints:\n"
- " If the property you are setting/printing has a '#' character or spaces,\n"
- " you MUST escape it with a \\ character or quote it with \".\n"
- "Examples: fdt print / # print the whole tree\n"
- " fdt print /cpus \"#address-cells\"\n"
- " fdt set /cpus \"#address-cells\" \"[00 00 00 01]\"\n"
+ "NOTE: If the path or property you are setting/printing has a '#' character\n"
+ " or spaces, you MUST escape it with a \\ character or quote it with \".\n"
);
/* Convert bitstream data and load into the fpga */
int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
{
-#if (CONFIG_FPGA & CFG_FPGA_XILINX)
+#if defined(CONFIG_FPGA_XILINX)
unsigned int length;
- unsigned char* swapdata;
unsigned int swapsize;
char buffer[80];
- unsigned char *ptr;
unsigned char *dataptr;
- unsigned char data;
unsigned int i;
int rc;
dataptr+=4;
printf(" bytes in bitstream = %d\n", swapsize);
- /* check consistency of length obtained */
- if (swapsize >= size) {
- printf("%s: Could not find right length of data in bitstream\n",
- __FUNCTION__);
- return FPGA_FAIL;
- }
-
- /* allocate memory */
- swapdata = (unsigned char *)malloc(swapsize);
- if (swapdata == NULL) {
- printf("%s: Could not allocate %d bytes memory !\n",
- __FUNCTION__, swapsize);
- return FPGA_FAIL;
- }
-
- /* read data into memory and swap bits */
- ptr = swapdata;
- for (i = 0; i < swapsize; i++) {
- data = 0x00;
- data |= (*dataptr & 0x01) << 7;
- data |= (*dataptr & 0x02) << 5;
- data |= (*dataptr & 0x04) << 3;
- data |= (*dataptr & 0x08) << 1;
- data |= (*dataptr & 0x10) >> 1;
- data |= (*dataptr & 0x20) >> 3;
- data |= (*dataptr & 0x40) >> 5;
- data |= (*dataptr & 0x80) >> 7;
- *ptr++ = data;
- dataptr++;
- }
-
- rc = fpga_load(dev, swapdata, swapsize);
- free(swapdata);
+ rc = fpga_load(dev, dataptr, swapsize);
return rc;
#else
printf("Bitstream support only for Xilinx devices\n");
static struct mtd_device *current_dev = NULL;
static u8 current_partnum = 0;
+#if defined(CONFIG_CMD_CRAMFS)
extern int cramfs_check (struct part_info *info);
extern int cramfs_load (char *loadoffset, struct part_info *info, char *filename);
extern int cramfs_ls (struct part_info *info, char *filename);
extern int cramfs_info (struct part_info *info);
+#else
+/* defining empty macros for function names is ugly but avoids ifdef clutter
+ * all over the code */
+#define cramfs_check(x) (0)
+#define cramfs_load(x,y,z) (-1)
+#define cramfs_ls(x,y) (0)
+#define cramfs_info(x) (0)
+#endif
static struct part_info* jffs2_part_info(struct mtd_device *dev, unsigned int part_num);
opts.quiet = quiet;
ret = nand_write_opts(nand, &opts);
}
+ } else if (s != NULL && !strcmp(s, ".oob")) {
+ /* read out-of-band data */
+ if (read)
+ ret = nand->read_oob(nand, off, size, &size,
+ (u_char *) addr);
+ else
+ ret = nand->write_oob(nand, off, size, &size,
+ (u_char *) addr);
} else {
if (read)
ret = nand_read(nand, off, &size, (u_char *)addr);
--- /dev/null
+/*
+ * (C) Copyright 2007 OpenMoko, Inc.
+ * Written by Harald Welte <laforge@openmoko.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Boot support
+ */
+#include <common.h>
+#include <command.h>
+#include <devices.h>
+
+#if defined(CONFIG_CMD_TERMINAL)
+
+int do_terminal(cmd_tbl_t * cmd, int flag, int argc, char *argv[])
+{
+ int i, l;
+ int last_tilde = 0;
+ device_t *dev = NULL;
+
+ if (argc < 1)
+ return -1;
+
+ /* Scan for selected output/input device */
+ for (i = 1; i <= ListNumItems (devlist); i++) {
+ device_t *tmp = ListGetPtrToItem (devlist, i);
+ if (!strcmp(tmp->name, argv[1])) {
+ dev = tmp;
+ break;
+ }
+ }
+ if (!dev)
+ return -1;
+
+ serial_reinit_all();
+ printf("Entering terminal mode for port %s\n", dev->name);
+ puts("Use '~.' to leave the terminal and get back to u-boot\n");
+
+ while (1) {
+ int c;
+
+ /* read from console and display on serial port */
+ if (stdio_devices[0]->tstc()) {
+ c = stdio_devices[0]->getc();
+ if (last_tilde == 1) {
+ if (c == '.') {
+ putc(c);
+ putc('\n');
+ break;
+ } else {
+ last_tilde = 0;
+ /* write the delayed tilde */
+ dev->putc('~');
+ /* fall-through to print current
+ * character */
+ }
+ }
+ if (c == '~') {
+ last_tilde = 1;
+ puts("[u-boot]");
+ putc(c);
+ }
+ dev->putc(c);
+ }
+
+ /* read from serial port and display on console */
+ if (dev->tstc()) {
+ c = dev->getc();
+ putc(c);
+ }
+ }
+ return 0;
+}
+
+
+/***************************************************/
+
+U_BOOT_CMD(
+ terminal, 3, 1, do_terminal,
+ "terminal - start terminal emulator\n",
+ ""
+);
+
+#endif /* CONFIG_CMD_TERMINAL */
#include <altera.h>
#include <ACEX1K.h> /* ACEX device family */
-#if (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA) && defined(CONFIG_FPGA_CYCLON2)
/* Define FPGA_DEBUG to get debug printf's */
#ifdef FPGA_DEBUG
return ret_val;
}
-#endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2)) */
+#endif /* CONFIG_FPGA && CONFIG_FPGA_ALTERA && CONFIG_FPGA_CYCLON2 */
DECLARE_GLOBAL_DATA_PTR;
unsigned long env_addr;
int use_default = 0;
- int retlen;
+ size_t retlen;
env_addr = CFG_ENV_ADDR;
env_addr -= (unsigned long)onenand_chip.base;
{
unsigned long env_addr = CFG_ENV_ADDR;
struct erase_info instr;
- int retlen;
+ size_t retlen;
instr.len = CFG_ENV_SIZE;
instr.addr = env_addr;
int err;
u32 tmp; /* used to set 32 bit integer properties */
char *str; /* used to set string properties */
+ const char *path;
err = fdt_check_header(fdt);
if (err < 0) {
nodeoffset = fdt_path_offset (fdt, "/chosen");
/*
- * If we have a "chosen" node already the "force the writing"
- * is not set, our job is done.
- */
- if ((nodeoffset >= 0) && !force)
- return 0;
-
- /*
- * No "chosen" node in the blob: create it.
+ * If there is no "chosen" node in the blob, create it.
*/
if (nodeoffset < 0) {
/*
}
/*
- * Update pre-existing properties, create them if non-existant.
+ * Create /chosen properites that don't exist in the fdt.
+ * If the property exists, update it only if the "force" parameter
+ * is true.
*/
str = getenv("bootargs");
if (str != NULL) {
- err = fdt_setprop(fdt, nodeoffset,
- "bootargs", str, strlen(str)+1);
- if (err < 0)
- printf("WARNING: could not set bootargs %s.\n",
- fdt_strerror(err));
+ path = fdt_getprop(fdt, nodeoffset, "bootargs", NULL);
+ if ((path == NULL) || force) {
+ err = fdt_setprop(fdt, nodeoffset,
+ "bootargs", str, strlen(str)+1);
+ if (err < 0)
+ printf("WARNING: could not set bootargs %s.\n",
+ fdt_strerror(err));
+ }
}
if (initrd_start && initrd_end) {
- tmp = __cpu_to_be32(initrd_start);
- err = fdt_setprop(fdt, nodeoffset,
- "linux,initrd-start", &tmp, sizeof(tmp));
- if (err < 0)
- printf("WARNING: "
- "could not set linux,initrd-start %s.\n",
- fdt_strerror(err));
- tmp = __cpu_to_be32(initrd_end);
- err = fdt_setprop(fdt, nodeoffset,
- "linux,initrd-end", &tmp, sizeof(tmp));
- if (err < 0)
- printf("WARNING: could not set linux,initrd-end %s.\n",
- fdt_strerror(err));
+ path = fdt_getprop(fdt, nodeoffset, "linux,initrd-start", NULL);
+ if ((path == NULL) || force) {
+ tmp = __cpu_to_be32(initrd_start);
+ err = fdt_setprop(fdt, nodeoffset,
+ "linux,initrd-start", &tmp, sizeof(tmp));
+ if (err < 0)
+ printf("WARNING: "
+ "could not set linux,initrd-start %s.\n",
+ fdt_strerror(err));
+ tmp = __cpu_to_be32(initrd_end);
+ err = fdt_setprop(fdt, nodeoffset,
+ "linux,initrd-end", &tmp, sizeof(tmp));
+ if (err < 0)
+ printf("WARNING: could not set linux,initrd-end %s.\n",
+ fdt_strerror(err));
+ }
}
#ifdef CONFIG_OF_STDOUT_VIA_ALIAS
- err = fdt_fixup_stdout(fdt, nodeoffset);
+ path = fdt_getprop(fdt, nodeoffset, "linux,stdout-path", NULL);
+ if ((path == NULL) || force)
+ err = fdt_fixup_stdout(fdt, nodeoffset);
#endif
#ifdef OF_STDOUT_PATH
- err = fdt_setprop(fdt, nodeoffset,
- "linux,stdout-path", OF_STDOUT_PATH, strlen(OF_STDOUT_PATH)+1);
- if (err < 0)
- printf("WARNING: could not set linux,stdout-path %s.\n",
- fdt_strerror(err));
+ path = fdt_getprop(fdt, nodeoffset, "linux,stdout-path", NULL);
+ if ((path == NULL) || force) {
+ err = fdt_setprop(fdt, nodeoffset,
+ "linux,stdout-path", OF_STDOUT_PATH, strlen(OF_STDOUT_PATH)+1);
+ if (err < 0)
+ printf("WARNING: could not set linux,stdout-path %s.\n",
+ fdt_strerror(err));
+ }
#endif
return err;
static void fpga_no_sup( char *fn, char *msg )
{
if ( fn && msg ) {
- printf( "%s: No support for %s. CONFIG_FPGA defined as 0x%x.\n",
- fn, msg, CONFIG_FPGA );
+ printf( "%s: No support for %s.\n", fn, msg);
} else if ( msg ) {
- printf( "No support for %s. CONFIG_FPGA defined as 0x%x.\n",
- msg, CONFIG_FPGA );
+ printf( "No support for %s.\n", msg);
} else {
- printf( "No FPGA suport! CONFIG_FPGA defined as 0x%x.\n",
- CONFIG_FPGA );
+ printf( "No FPGA suport!\n");
}
}
printf( "%s: Null buffer.\n", fn );
return (fpga_desc * const)NULL;
}
- if ( !bsize ) {
- printf( "%s: Null buffer size.\n", fn );
- return (fpga_desc * const)NULL;
- }
-
return desc;
}
switch ( desc->devtype ) {
case fpga_xilinx:
-#if CONFIG_FPGA & CFG_FPGA_XILINX
+#if defined(CONFIG_FPGA_XILINX)
printf( "Xilinx Device\nDescriptor @ 0x%p\n", desc );
ret_val = xilinx_info( desc->devdesc );
#else
#endif
break;
case fpga_altera:
-#if CONFIG_FPGA & CFG_FPGA_ALTERA
+#if defined(CONFIG_FPGA_ALTERA)
printf( "Altera Device\nDescriptor @ 0x%p\n", desc );
ret_val = altera_info( desc->devdesc );
#else
switch ( devtype ) {
case fpga_xilinx:
-#if CONFIG_FPGA & CFG_FPGA_XILINX
+#if defined(CONFIG_FPGA_XILINX)
ret_val = xilinx_reloc( desc, reloc_off );
#else
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
-#if CONFIG_FPGA & CFG_FPGA_ALTERA
+#if defined(CONFIG_FPGA_ALTERA)
ret_val = altera_reloc( desc, reloc_off );
#else
fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
if ( desc ) {
switch ( desc->devtype ) {
case fpga_xilinx:
-#if CONFIG_FPGA & CFG_FPGA_XILINX
+#if defined(CONFIG_FPGA_XILINX)
ret_val = xilinx_load( desc->devdesc, buf, bsize );
#else
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
-#if CONFIG_FPGA & CFG_FPGA_ALTERA
+#if defined(CONFIG_FPGA_ALTERA)
ret_val = altera_load( desc->devdesc, buf, bsize );
#else
fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
if ( desc ) {
switch ( desc->devtype ) {
case fpga_xilinx:
-#if CONFIG_FPGA & CFG_FPGA_XILINX
+#if defined(CONFIG_FPGA_XILINX)
ret_val = xilinx_dump( desc->devdesc, buf, bsize );
#else
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
-#if CONFIG_FPGA & CFG_FPGA_ALTERA
+#if defined(CONFIG_FPGA_ALTERA)
ret_val = altera_dump( desc->devdesc, buf, bsize );
#else
fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
}
}
-static int cread_line(char *buf, unsigned int *len)
+static int cread_line(const char *const prompt, char *buf, unsigned int *len)
{
unsigned long num = 0;
unsigned long eol_num = 0;
insert = !insert;
break;
case CTL_CH('x'):
+ case CTL_CH('u'):
BEGINNING_OF_LINE();
ERASE_TO_EOL();
break;
REFRESH_TO_EOL();
continue;
}
+#ifdef CONFIG_AUTO_COMPLETE
+ case '\t': {
+ int num2, col;
+
+ /* do not autocomplete when in the middle */
+ if (num < eol_num) {
+ getcmd_cbeep();
+ break;
+ }
+
+ buf[num] = '\0';
+ col = strlen(prompt) + eol_num;
+ num2 = num;
+ if (cmd_auto_complete(prompt, buf, &num2, &col)) {
+ col = num2 - num;
+ num += col;
+ eol_num += col;
+ }
+ break;
+ }
+#endif
default:
cread_add_char(ichar, insert, &num, &eol_num, buf, *len);
break;
puts (prompt);
- rc = cread_line(p, &len);
+ rc = cread_line(prompt, p, &len);
return rc < 0 ? rc : len;
#else
char *p = console_buffer;
static struct serial_device *serial_current = NULL;
#if !defined(CONFIG_LWMON) && !defined(CONFIG_PXA27X)
-struct serial_device *default_serial_console (void)
+struct serial_device *__default_serial_console (void)
{
#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2)
return &serial_smc_device;
#error No default console
#endif
}
+
+struct serial_device *default_serial_console(void) __attribute__((weak, alias("__default_serial_console")));
#endif
int serial_register (struct serial_device *dev)
#include <common.h> /* core U-Boot definitions */
#include <spartan2.h> /* Spartan-II device family */
-#if (CONFIG_FPGA & (CFG_XILINX | CFG_SPARTAN2))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_SPARTAN2)
/* Define FPGA_DEBUG to get debug printf's */
#ifdef FPGA_DEBUG
int ret_val = FPGA_FAIL; /* assume the worst */
Xilinx_Spartan2_Slave_Serial_fns *fn = desc->iface_fns;
int i;
- char val;
+ unsigned char val;
PRINTF ("%s: start with interface functions @ 0x%p\n",
__FUNCTION__, fn);
}
putc ('\n'); /* terminate the dotted line */
+ /*
+ * Run the post configuration function if there is one.
+ */
+ if (*fn->post) {
+ (*fn->post) (cookie);
+ }
+
#ifdef CFG_FPGA_PROG_FEEDBACK
if (ret_val == FPGA_SUCCESS) {
puts ("Done.\n");
PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__,
desc);
- addr = (ulong) (fn->pre) + reloc_offset;
- fn_r->pre = (Xilinx_pre_fn) addr;
+ if (fn->pre) {
+ addr = (ulong) (fn->pre) + reloc_offset;
+ fn_r->pre = (Xilinx_pre_fn) addr;
+ }
addr = (ulong) (fn->pgm) + reloc_offset;
fn_r->pgm = (Xilinx_pgm_fn) addr;
addr = (ulong) (fn->wr) + reloc_offset;
fn_r->wr = (Xilinx_wr_fn) addr;
+ if (fn->post) {
+ addr = (ulong) (fn->post) + reloc_offset;
+ fn_r->post = (Xilinx_post_fn) addr;
+ }
+
fn_r->relocated = TRUE;
} else {
#include <common.h> /* core U-Boot definitions */
#include <spartan3.h> /* Spartan-II device family */
-#if (CONFIG_FPGA & (CFG_XILINX | CFG_SPARTAN3))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_SPARTAN3)
/* Define FPGA_DEBUG to get debug printf's */
#ifdef FPGA_DEBUG
int ret_val = FPGA_FAIL; /* assume the worst */
Xilinx_Spartan3_Slave_Serial_fns *fn = desc->iface_fns;
int i;
- char val;
+ unsigned char val;
PRINTF ("%s: start with interface functions @ 0x%p\n",
__FUNCTION__, fn);
}
putc ('\n'); /* terminate the dotted line */
+ /*
+ * Run the post configuration function if there is one.
+ */
+ if (*fn->post) {
+ (*fn->post) (cookie);
+ }
+
#ifdef CFG_FPGA_PROG_FEEDBACK
if (ret_val == FPGA_SUCCESS) {
puts ("Done.\n");
PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__,
desc);
- addr = (ulong) (fn->pre) + reloc_offset;
- fn_r->pre = (Xilinx_pre_fn) addr;
+ if (fn->pre) {
+ addr = (ulong) (fn->pre) + reloc_offset;
+ fn_r->pre = (Xilinx_pre_fn) addr;
+ }
addr = (ulong) (fn->pgm) + reloc_offset;
fn_r->pgm = (Xilinx_pgm_fn) addr;
addr = (ulong) (fn->wr) + reloc_offset;
fn_r->wr = (Xilinx_wr_fn) addr;
+ if (fn->post) {
+ addr = (ulong) (fn->post) + reloc_offset;
+ fn_r->post = (Xilinx_post_fn) addr;
+ }
+
fn_r->relocated = TRUE;
} else {
#include <common.h>
#include <virtex2.h>
-#if (CONFIG_FPGA & (CFG_XILINX | CFG_VIRTEX2))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_VIRTEX2)
#if 0
#define FPGA_DEBUG
#include <spartan2.h>
#include <spartan3.h>
-#if (CONFIG_FPGA & CFG_FPGA_XILINX)
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_XILINX)
#if 0
#define FPGA_DEBUG
} else
switch (desc->family) {
case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
PRINTF ("%s: Launching the Spartan-II Loader...\n",
__FUNCTION__);
ret_val = Spartan2_load (desc, buf, bsize);
#endif
break;
case Xilinx_Spartan3:
-#if (CONFIG_FPGA & CFG_SPARTAN3)
+#if defined(CONFIG_FPGA_SPARTAN3)
PRINTF ("%s: Launching the Spartan-III Loader...\n",
__FUNCTION__);
ret_val = Spartan3_load (desc, buf, bsize);
#endif
break;
case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined(CONFIG_FPGA_VIRTEX2)
PRINTF ("%s: Launching the Virtex-II Loader...\n",
__FUNCTION__);
ret_val = Virtex2_load (desc, buf, bsize);
} else
switch (desc->family) {
case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
PRINTF ("%s: Launching the Spartan-II Reader...\n",
__FUNCTION__);
ret_val = Spartan2_dump (desc, buf, bsize);
#endif
break;
case Xilinx_Spartan3:
-#if (CONFIG_FPGA & CFG_SPARTAN3)
+#if defined(CONFIG_FPGA_SPARTAN3)
PRINTF ("%s: Launching the Spartan-III Reader...\n",
__FUNCTION__);
ret_val = Spartan3_dump (desc, buf, bsize);
#endif
break;
case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined( CONFIG_FPGA_VIRTEX2)
PRINTF ("%s: Launching the Virtex-II Reader...\n",
__FUNCTION__);
ret_val = Virtex2_dump (desc, buf, bsize);
printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
switch (desc->family) {
case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
Spartan2_info (desc);
#else
/* just in case */
#endif
break;
case Xilinx_Spartan3:
-#if (CONFIG_FPGA & CFG_SPARTAN3)
+#if defined(CONFIG_FPGA_SPARTAN3)
Spartan3_info (desc);
#else
/* just in case */
#endif
break;
case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined(CONFIG_FPGA_VIRTEX2)
Virtex2_info (desc);
#else
/* just in case */
} else
switch (desc->family) {
case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
ret_val = Spartan2_reloc (desc, reloc_offset);
#else
printf ("%s: No support for Spartan-II devices.\n",
#endif
break;
case Xilinx_Spartan3:
-#if (CONFIG_FPGA & CFG_SPARTAN3)
+#if defined(CONFIG_FPGA_SPARTAN3)
ret_val = Spartan3_reloc (desc, reloc_offset);
#else
printf ("%s: No support for Spartan-III devices.\n",
#endif
break;
case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined(CONFIG_FPGA_VIRTEX2)
ret_val = Virtex2_reloc (desc, reloc_offset);
#else
printf ("%s: No support for Virtex-II devices.\n",
return ret_val;
}
-#endif /* CONFIG_FPGA & CFG_FPGA_XILINX */
+#endif /* CONFIG_FPGA && CONFIG_FPGA_XILINX */
#include <common.h>
#include <asm/arch/ixp425.h>
+/*
+ * 14.7456 MHz
+ * Baud Rate = --------------
+ * 16 x Divisor
+ */
+#define SERIAL_CLOCK 921600
+
DECLARE_GLOBAL_DATA_PTR;
void serial_setbrg (void)
unsigned int quot = 0;
int uart = CFG_IXP425_CONSOLE;
- if (gd->baudrate == 1200)
- quot = 192;
- else if (gd->baudrate == 9600)
- quot = 96;
- else if (gd->baudrate == 19200)
- quot = 48;
- else if (gd->baudrate == 38400)
- quot = 24;
- else if (gd->baudrate == 57600)
- quot = 16;
- else if (gd->baudrate == 115200)
- quot = 8;
+ if ((gd->baudrate <= SERIAL_CLOCK) && (SERIAL_CLOCK % gd->baudrate == 0))
+ quot = SERIAL_CLOCK / gd->baudrate;
else
hang ();
IER(uart) = IER_UUE;
}
-
/*
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
START = start.o
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
- spd_sdram.o ecc.o qe_io.o pci.o
+ spd_sdram.o ecc.o qe_io.o pci.o fdt.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
/*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
#include <command.h>
#include <mpc83xx.h>
#include <asm/processor.h>
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
-#include <fdt_support.h>
-#endif
DECLARE_GLOBAL_DATA_PTR;
printf("e300c3, ");
break;
+ case PVR_E300C4:
+ printf("e300c4, ");
+ break;
+
default:
printf("Unknown core, ");
}
case SPR_8313E_REV10:
puts("MPC8313E, ");
break;
+ case SPR_8315E_REV10:
+ puts("MPC8315E, ");
+ break;
+ case SPR_8315_REV10:
+ puts("MPC8315, ");
+ break;
+ case SPR_8314E_REV10:
+ puts("MPC8314E, ");
+ break;
+ case SPR_8314_REV10:
+ puts("MPC8314, ");
+ break;
+ case SPR_8379E_REV10:
+ puts("MPC8379E, ");
+ break;
+ case SPR_8379_REV10:
+ puts("MPC8379, ");
+ break;
+ case SPR_8378E_REV10:
+ puts("MPC8378E, ");
+ break;
+ case SPR_8378_REV10:
+ puts("MPC8378, ");
+ break;
+ case SPR_8377E_REV10:
+ puts("MPC8377E, ");
+ break;
+ case SPR_8377_REV10:
+ puts("MPC8377, ");
+ break;
default:
printf("Rev: Unknown revision number:%08x\n"
"Warning: Unsupported cpu revision!\n",spridr);
}
#endif
-#if defined(CONFIG_OF_LIBFDT)
-
-/*
- * "Setter" functions used to add/modify FDT entries.
- */
-static int fdt_set_eth0(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- /* Fix it up if it exists, don't create it if it doesn't exist */
- if (fdt_get_property(blob, nodeoffset, name, 0)) {
- return fdt_setprop(blob, nodeoffset, name, bd->bi_enetaddr, 6);
- }
- return 0;
-}
-#ifdef CONFIG_HAS_ETH1
-/* second onboard ethernet port */
-static int fdt_set_eth1(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- /* Fix it up if it exists, don't create it if it doesn't exist */
- if (fdt_get_property(blob, nodeoffset, name, 0)) {
- return fdt_setprop(blob, nodeoffset, name, bd->bi_enet1addr, 6);
- }
- return 0;
-}
-#endif
-#ifdef CONFIG_HAS_ETH2
-/* third onboard ethernet port */
-static int fdt_set_eth2(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- /* Fix it up if it exists, don't create it if it doesn't exist */
- if (fdt_get_property(blob, nodeoffset, name, 0)) {
- return fdt_setprop(blob, nodeoffset, name, bd->bi_enet2addr, 6);
- }
- return 0;
-}
-#endif
-#ifdef CONFIG_HAS_ETH3
-/* fourth onboard ethernet port */
-static int fdt_set_eth3(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- /* Fix it up if it exists, don't create it if it doesn't exist */
- if (fdt_get_property(blob, nodeoffset, name, 0)) {
- return fdt_setprop(blob, nodeoffset, name, bd->bi_enet3addr, 6);
- }
- return 0;
-}
-#endif
-
-static int fdt_set_busfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- u32 tmp;
- /* Create or update the property */
- tmp = cpu_to_be32(bd->bi_busfreq);
- return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
-}
-
-static int fdt_set_tbfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- u32 tmp;
- /* Create or update the property */
- tmp = cpu_to_be32(OF_TBCLK);
- return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
-}
-
-
-static int fdt_set_clockfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- u32 tmp;
- /* Create or update the property */
- tmp = cpu_to_be32(gd->core_clk);
- return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
-}
-
-#ifdef CONFIG_QE
-static int fdt_set_qe_busfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- u32 tmp;
- /* Create or update the property */
- tmp = cpu_to_be32(gd->qe_clk);
- return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
-}
-
-static int fdt_set_qe_brgfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- u32 tmp;
- /* Create or update the property */
- tmp = cpu_to_be32(gd->brg_clk);
- return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
-}
-#endif
-
-/*
- * Fixups to the fdt.
- */
-static const struct {
- char *node;
- char *prop;
- int (*set_fn)(void *blob, int nodeoffset, const char *name, bd_t *bd);
-} fixup_props[] = {
- { "/cpus/" OF_CPU,
- "timebase-frequency",
- fdt_set_tbfreq
- },
- { "/cpus/" OF_CPU,
- "bus-frequency",
- fdt_set_busfreq
- },
- { "/cpus/" OF_CPU,
- "clock-frequency",
- fdt_set_clockfreq
- },
- { "/" OF_SOC,
- "bus-frequency",
- fdt_set_busfreq
- },
- { "/" OF_SOC "/serial@4500",
- "clock-frequency",
- fdt_set_busfreq
- },
- { "/" OF_SOC "/serial@4600",
- "clock-frequency",
- fdt_set_busfreq
- },
-#ifdef CONFIG_TSEC1
- { "/" OF_SOC "/ethernet@24000",
- "mac-address",
- fdt_set_eth0
- },
- { "/" OF_SOC "/ethernet@24000",
- "local-mac-address",
- fdt_set_eth0
- },
-#endif
-#ifdef CONFIG_TSEC2
- { "/" OF_SOC "/ethernet@25000",
- "mac-address",
- fdt_set_eth1
- },
- { "/" OF_SOC "/ethernet@25000",
- "local-mac-address",
- fdt_set_eth1
- },
-#endif
-#ifdef CONFIG_QE
- { "/" OF_QE,
- "brg-frequency",
- fdt_set_qe_brgfreq
- },
- { "/" OF_QE,
- "bus-frequency",
- fdt_set_qe_busfreq
- },
-#ifdef CONFIG_UEC_ETH1
-#if CFG_UEC1_UCC_NUM == 0 /* UCC1 */
- { "/" OF_QE "/ucc@2000",
- "mac-address",
- fdt_set_eth0
- },
- { "/" OF_QE "/ucc@2000",
- "local-mac-address",
- fdt_set_eth0
- },
-#elif CFG_UEC1_UCC_NUM == 2 /* UCC3 */
- { "/" OF_QE "/ucc@2200",
- "mac-address",
- fdt_set_eth0
- },
- { "/" OF_QE "/ucc@2200",
- "local-mac-address",
- fdt_set_eth0
- },
-#endif
-#endif /* CONFIG_UEC_ETH1 */
-#ifdef CONFIG_UEC_ETH2
-#if CFG_UEC2_UCC_NUM == 1 /* UCC2 */
- { "/" OF_QE "/ucc@3000",
- "mac-address",
- fdt_set_eth1
- },
- { "/" OF_QE "/ucc@3000",
- "local-mac-address",
- fdt_set_eth1
- },
-#elif CFG_UEC2_UCC_NUM == 3 /* UCC4 */
- { "/" OF_QE "/ucc@3200",
- "mac-address",
- fdt_set_eth1
- },
- { "/" OF_QE "/ucc@3200",
- "local-mac-address",
- fdt_set_eth1
- },
-#endif
-#endif /* CONFIG_UEC_ETH2 */
-#endif /* CONFIG_QE */
-};
-
-void
-ft_cpu_setup(void *blob, bd_t *bd)
-{
- int nodeoffset;
- int err;
- int j;
-
- for (j = 0; j < (sizeof(fixup_props) / sizeof(fixup_props[0])); j++) {
- nodeoffset = fdt_path_offset(blob, fixup_props[j].node);
- if (nodeoffset >= 0) {
- err = fixup_props[j].set_fn(blob, nodeoffset,
- fixup_props[j].prop, bd);
- if (err < 0)
- debug("Problem setting %s = %s: %s\n",
- fixup_props[j].node, fixup_props[j].prop,
- fdt_strerror(err));
- } else {
- debug("Couldn't find %s: %s\n",
- fixup_props[j].node, fdt_strerror(nodeoffset));
- }
- }
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-}
-#elif defined(CONFIG_OF_FLAT_TREE)
-void
-ft_cpu_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
- ulong clock;
-
- clock = bd->bi_busfreq;
- p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
- if (p != NULL)
- *p = cpu_to_be32(clock);
-
- p = ft_get_prop(blob, "/" OF_SOC "/bus-frequency", &len);
- if (p != NULL)
- *p = cpu_to_be32(clock);
-
- p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len);
- if (p != NULL)
- *p = cpu_to_be32(clock);
-
- p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len);
- if (p != NULL)
- *p = cpu_to_be32(clock);
-
-#ifdef CONFIG_TSEC1
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enetaddr, 6);
-
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enetaddr, 6);
-#endif
-
-#ifdef CONFIG_TSEC2
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet1addr, 6);
-
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet1addr, 6);
-#endif
-
-#ifdef CONFIG_UEC_ETH1
-#if CFG_UEC1_UCC_NUM == 0 /* UCC1 */
- p = ft_get_prop(blob, "/" OF_QE "/ucc@2000/mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enetaddr, 6);
-
- p = ft_get_prop(blob, "/" OF_QE "/ucc@2000/local-mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enetaddr, 6);
-#elif CFG_UEC1_UCC_NUM == 2 /* UCC3 */
- p = ft_get_prop(blob, "/" OF_QE "/ucc@2200/mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enetaddr, 6);
-
- p = ft_get_prop(blob, "/" OF_QE "/ucc@2200/local-mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enetaddr, 6);
-#endif
-#endif
-
-#ifdef CONFIG_UEC_ETH2
-#if CFG_UEC2_UCC_NUM == 1 /* UCC2 */
- p = ft_get_prop(blob, "/" OF_QE "/ucc@3000/mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet1addr, 6);
-
- p = ft_get_prop(blob, "/" OF_QE "/ucc@3000/local-mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet1addr, 6);
-#elif CFG_UEC2_UCC_NUM == 3 /* UCC4 */
- p = ft_get_prop(blob, "/" OF_QE "/ucc@3200/mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet1addr, 6);
-
- p = ft_get_prop(blob, "/" OF_QE "/ucc@3200/local-mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet1addr, 6);
-#endif
-#endif
-}
-#endif
-
#if defined(CONFIG_DDR_ECC)
void dma_init(void)
{
/*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
#ifdef CFG_DDRCDR
im->sysconf.ddrcdr = CFG_DDRCDR;
#endif
+ /* Output buffer impedance register */
+#ifdef CFG_OBIR
+ im->sysconf.obir = CFG_OBIR;
+#endif
#ifdef CONFIG_QE
/* Config QE ioports */
--- /dev/null
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+
+#include <libfdt.h>
+#include <fdt_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
+ defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
+ fdt_fixup_ethernet(blob, bd);
+#endif
+
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "timebase-frequency", (bd->bi_busfreq / 4), 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "clock-frequency", gd->core_clk, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+#ifdef CONFIG_QE
+ do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
+ "bus-frequency", gd->qe_clk, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
+ "brg-frequency", gd->brg_clk, 1);
+#endif
+
+#ifdef CFG_NS16550
+ do_fixup_by_compat_u32(blob, "ns16550",
+ "clock-frequency", bd->bi_busfreq, 1);
+#endif
+
+#ifdef CONFIG_CPM2
+ do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
+ "current-speed", bd->bi_baudrate, 1);
+
+ do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
+ "clock-frequency", bd->bi_brgfreq, 1);
+#endif
+
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+}
+#endif /* CONFIG_OF_LIBFDT */
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
-#elif defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
+#include <fdt_support.h>
#endif
#include <asm/mpc8349_pci.h>
void ft_pci_setup(void *blob, bd_t *bd)
{
int nodeoffset;
- int err;
int tmp[2];
+ const char *path;
if (pci_num_buses < 1)
return;
- nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
+ nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
- tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
- tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
- err = fdt_setprop(blob, nodeoffset, "bus-range",
- tmp, sizeof(tmp));
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- err = fdt_setprop(blob, nodeoffset, "clock-frequency",
- tmp, sizeof(tmp[0]));
- }
-
- if (pci_num_buses < 2)
- return;
-
- nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8600");
- if (nodeoffset >= 0) {
- tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
- tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
- err = fdt_setprop(blob, nodeoffset, "bus-range",
- tmp, sizeof(tmp));
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- err = fdt_setprop(blob, nodeoffset, "clock-frequency",
- tmp, sizeof(tmp[0]));
- }
-}
-#elif CONFIG_OF_FLAT_TREE
-void ft_pci_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
-
- if (pci_num_buses < 1)
- return;
-
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
- if (p) {
- p[0] = pci_hose[0].first_busno;
- p[1] = pci_hose[0].last_busno;
- }
-
- if (pci_num_buses < 2)
- return;
-
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
- if (p) {
- p[0] = pci_hose[1].first_busno;
- p[1] = pci_hose[1].last_busno;
+ path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
+
+ if (pci_num_buses < 2)
+ return;
+
+ path = fdt_getprop(blob, nodeoffset, "pci1", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
}
}
-#endif /* CONFIG_OF_FLAT_TREE */
-
+#endif /* CONFIG_OF_LIBFDT */
#endif /* CONFIG_83XX_GENERIC_PCI */
/*
- * (C) Copyright 2006 Freescale Semiconductor, Inc.
+ * (C) Copyright 2006-2007 Freescale Semiconductor, Inc.
*
* (C) Copyright 2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
if(spd.mem_type == SPD_MEMTYPE_DDR2) {
immap->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
}
+ udelay(50000);
#endif
/*
if (effective_data_rate == 266 || effective_data_rate == 333) {
cpo = 0x7; /* READ_LAT + 5/4 */
} else if (effective_data_rate == 400) {
- cpo = 0x9; /* READ_LAT + 7/4 */
+ cpo = 0x7; /* READ_LAT + 5/4 */
} else {
/* Automatic calibration */
cpo = 0x1f;
* SDRAM Cfg 2
*/
odt_cfg = 0;
+#ifndef CONFIG_NEVER_ASSERT_ODT_TO_CPU
if (odt_rd_cfg | odt_wr_cfg) {
odt_cfg = 0x2; /* ODT to IOs during reads */
}
+#endif
if (spd.mem_type == SPD_MEMTYPE_DDR2) {
ddr->sdram_cfg2 = (0
| (0 << 26) /* True DQS */
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
u32 lcrr;
u32 csb_clk;
-#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
u32 i2c1_clk;
#if !defined(CONFIG_MPC832X)
u32 i2c2_clk;
+#endif
+#if defined(CONFIG_MPC8315)
+ u32 tdm_clk;
+#endif
+#if defined(CONFIG_MPC837X)
+ u32 sdhc_clk;
#endif
u32 enc_clk;
u32 lbiu_clk;
u32 qe_clk;
u32 brg_clk;
#endif
+#if defined(CONFIG_MPC837X)
+ u32 pciexp1_clk;
+ u32 pciexp2_clk;
+#endif
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+ u32 sata_clk;
+#endif
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
return -1;
sccr = im->clk.sccr;
-#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
case 0:
tsec1_clk = 0;
break;
default:
/* unkown SCCR_TSEC1CM value */
- return -4;
+ return -2;
}
switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
break;
default:
/* unkown SCCR_USBDRCM value */
- return -8;
+ return -3;
}
#endif
-#if defined(CONFIG_MPC834X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
case 0:
tsec2_clk = 0;
break;
default:
/* unkown SCCR_TSEC2CM value */
- return -5;
+ return -4;
}
+#elif defined(CONFIG_MPC8313)
+ tsec2_clk = tsec1_clk;
- i2c1_clk = tsec2_clk;
+ if (!(sccr & SCCR_TSEC1ON))
+ tsec1_clk = 0;
+ if (!(sccr & SCCR_TSEC2ON))
+ tsec2_clk = 0;
+#endif
+#if defined(CONFIG_MPC834X)
switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
case 0:
usbmph_clk = 0;
break;
default:
/* unkown SCCR_USBMPHCM value */
- return -7;
+ return -5;
}
if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) {
* USB DR clock is not disabled then
* USB MPH & USB DR must have the same rate
*/
- return -9;
+ return -6;
+ }
+#endif
+ switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+ case 0:
+ enc_clk = 0;
+ break;
+ case 1:
+ enc_clk = csb_clk;
+ break;
+ case 2:
+ enc_clk = csb_clk / 2;
+ break;
+ case 3:
+ enc_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_ENCCM value */
+ return -7;
}
-#elif defined(CONFIG_MPC831X)
- tsec2_clk = tsec1_clk;
- if (!(sccr & SCCR_TSEC1ON))
- tsec1_clk = 0;
- if (!(sccr & SCCR_TSEC2ON))
- tsec2_clk = 0;
+#if defined(CONFIG_MPC837X)
+ switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) {
+ case 0:
+ sdhc_clk = 0;
+ break;
+ case 1:
+ sdhc_clk = csb_clk;
+ break;
+ case 2:
+ sdhc_clk = csb_clk / 2;
+ break;
+ case 3:
+ sdhc_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_SDHCCM value */
+ return -8;
+ }
+#endif
+#if defined(CONFIG_MPC8315)
+ switch ((sccr & SCCR_TDMCM) >> SCCR_TDMCM_SHIFT) {
+ case 0:
+ tdm_clk = 0;
+ break;
+ case 1:
+ tdm_clk = csb_clk;
+ break;
+ case 2:
+ tdm_clk = csb_clk / 2;
+ break;
+ case 3:
+ tdm_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_TDMCM value */
+ return -8;
+ }
#endif
-#if !defined(CONFIG_MPC834X)
+#if defined(CONFIG_MPC834X)
+ i2c1_clk = tsec2_clk;
+#elif defined(CONFIG_MPC8360)
i2c1_clk = csb_clk;
+#elif defined(CONFIG_MPC832X)
+ i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC831X)
+ i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC837X)
+ i2c1_clk = sdhc_clk;
#endif
#if !defined(CONFIG_MPC832X)
- i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
+ i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
#endif
- switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+#if defined(CONFIG_MPC837X)
+ switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) {
case 0:
- enc_clk = 0;
+ pciexp1_clk = 0;
break;
case 1:
- enc_clk = csb_clk;
+ pciexp1_clk = csb_clk;
break;
case 2:
- enc_clk = csb_clk / 2;
+ pciexp1_clk = csb_clk / 2;
break;
case 3:
- enc_clk = csb_clk / 3;
+ pciexp1_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_ENCCM value */
- return -6;
+ /* unkown SCCR_PCIEXP1CM value */
+ return -9;
+ }
+
+ switch ((sccr & SCCR_PCIEXP2CM) >> SCCR_PCIEXP2CM_SHIFT) {
+ case 0:
+ pciexp2_clk = 0;
+ break;
+ case 1:
+ pciexp2_clk = csb_clk;
+ break;
+ case 2:
+ pciexp2_clk = csb_clk / 2;
+ break;
+ case 3:
+ pciexp2_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_PCIEXP2CM value */
+ return -10;
}
+#endif
+
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+ switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) {
+ case 0:
+ sata_clk = 0;
+ break;
+ case 1:
+ sata_clk = csb_clk;
+ break;
+ case 2:
+ sata_clk = csb_clk / 2;
+ break;
+ case 3:
+ sata_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_SATA1CM value */
+ return -11;
+ }
+#endif
lbiu_clk = csb_clk *
(1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
break;
default:
/* unknown lcrr */
- return -10;
+ return -12;
}
ddr_clk = csb_clk *
break;
default:
/* unkown core to csb ratio */
- return -12;
+ return -13;
}
#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
#endif
gd->csb_clk = csb_clk;
-#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
gd->tsec1_clk = tsec1_clk;
gd->tsec2_clk = tsec2_clk;
gd->usbdr_clk = usbdr_clk;
#endif
#if defined(CONFIG_MPC834X)
gd->usbmph_clk = usbmph_clk;
+#endif
+#if defined(CONFIG_MPC8315)
+ gd->tdm_clk = tdm_clk;
+#endif
+#if defined(CONFIG_MPC837X)
+ gd->sdhc_clk = sdhc_clk;
#endif
gd->core_clk = core_clk;
gd->i2c1_clk = i2c1_clk;
#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
gd->qe_clk = qe_clk;
gd->brg_clk = brg_clk;
+#endif
+#if defined(CONFIG_MPC837X)
+ gd->pciexp1_clk = pciexp1_clk;
+ gd->pciexp2_clk = pciexp2_clk;
+#endif
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+ gd->sata_clk = sata_clk;
#endif
gd->pci_clk = pci_sync_in;
gd->cpu_clk = gd->core_clk;
#if !defined(CONFIG_MPC832X)
printf(" I2C2: %4d MHz\n", gd->i2c2_clk / 1000000);
#endif
-#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC8315)
+ printf(" TDM: %4d MHz\n", gd->tdm_clk / 1000000);
+#endif
+#if defined(CONFIG_MPC837X)
+ printf(" SDHC: %4d MHz\n", gd->sdhc_clk / 1000000);
+#endif
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
printf(" TSEC1: %4d MHz\n", gd->tsec1_clk / 1000000);
printf(" TSEC2: %4d MHz\n", gd->tsec2_clk / 1000000);
printf(" USB DR: %4d MHz\n", gd->usbdr_clk / 1000000);
#endif
#if defined(CONFIG_MPC834X)
printf(" USB MPH: %4d MHz\n", gd->usbmph_clk / 1000000);
+#endif
+#if defined(CONFIG_MPC837X)
+ printf(" PCIEXP1: %4d MHz\n", gd->pciexp1_clk / 1000000);
+ printf(" PCIEXP2: %4d MHz\n", gd->pciexp2_clk / 1000000);
+#endif
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+ printf(" SATA: %4d MHz\n", gd->sata_clk / 1000000);
#endif
return 0;
}
uint major, minor;
uint lcrr; /* local bus clock ratio register */
uint clkdiv; /* clock divider portion of lcrr */
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
puts("Freescale PowerPC\n");
switch (ver) {
case PVR_VER(PVR_86xx):
- puts("E600");
- break;
+ {
+ uint msscr0 = mfspr(MSSCR0);
+ printf("E600 Core %d", (msscr0 & 0x20) ? 1 : 0 );
+ if (gur->pordevsr & MPC86xx_PORDEVSR_CORE1TE)
+ puts("\n Core1Translation Enabled");
+ debug(" (MSSCR0=%x, PORDEVSR=%x)", msscr0, gur->pordevsr);
+ }
+ break;
default:
puts("Unknown");
break;
puts("8641");
}
break;
+ case SVR_8610:
+ puts("8610");
+ break;
default:
puts("Unknown");
break;
static int fec_recv(struct eth_device* dev);
static int fec_init(struct eth_device* dev, bd_t * bd);
static void fec_halt(struct eth_device* dev);
+static void __mii_init(void);
int fec_initialize(bd_t *bis)
{
}
}
+static int fec_reset(volatile fec_t *fecp)
+{
+ int i;
+
+ /* Whack a reset.
+ * A delay is required between a reset of the FEC block and
+ * initialization of other FEC registers because the reset takes
+ * some time to complete. If you don't delay, subsequent writes
+ * to FEC registers might get killed by the reset routine which is
+ * still in progress.
+ */
+
+ fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
+ for (i = 0;
+ (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
+ ++i) {
+ udelay (1);
+ }
+ if (i == FEC_RESET_DELAY)
+ return -1;
+
+ return 0;
+}
+
static int fec_init (struct eth_device *dev, bd_t * bd)
{
struct ether_fcc_info_s *efis = dev->priv;
#endif /* CONFIG_FADS */
}
- /* Whack a reset.
- * A delay is required between a reset of the FEC block and
- * initialization of other FEC registers because the reset takes
- * some time to complete. If you don't delay, subsequent writes
- * to FEC registers might get killed by the reset routine which is
- * still in progress.
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+ /* the MII interface is connected to FEC1
+ * so for the miiphy_xxx function to work we must
+ * call mii_init since fec_halt messes the thing up
*/
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
- for (i = 0;
- (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
- ++i) {
- udelay (1);
- }
- if (i == FEC_RESET_DELAY) {
+ if (efis->ether_index != 0)
+ __mii_init();
+#endif
+
+ if (fec_reset(fecp) < 0)
printf ("FEC_RESET_DELAY timeout\n");
- return 0;
- }
/* We use strictly polling mode only
*/
/* Set station address
*/
-#define ea eth_get_dev()->enetaddr
+#define ea dev->enetaddr
fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
fecp->fec_addr_high = (ea[4] << 8) | (ea[5]);
#undef ea
} else {
efis->actual_phy_addr = efis->phy_addr;
}
-#if defined(CONFIG_MII) && defined(CONFIG_RMII)
-
- /* the MII interface is connected to FEC1
- * so for the miiphy_xxx function to work we must
- * call mii_init since fec_halt messes the thing up
- */
- if (efis->ether_index != 0)
- mii_init();
+#if defined(CONFIG_MII) && defined(CONFIG_RMII)
/*
* adapt the RMII speed to the speed of the phy
*/
udelay(10000); /* wait 10ms */
}
for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
- phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+ phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
#ifdef ET_DEBUG
printf("PHY type 0x%x pass %d type ", phytype, pass);
#endif
if (phytype != 0xffff) {
phyaddr = phyno;
- phytype <<= 16;
phytype |= mii_send(mk_mii_read(phyno,
- PHY_PHYIDR2));
+ PHY_PHYIDR1)) << 16;
#ifdef ET_DEBUG
printf("PHY @ 0x%x pass %d type ",phyno,pass);
#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII)
/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
+ * mii_init -- Initialize the MII via FEC 1 for MII command without ethernet
* This function is a subset of eth_init
****************************************************************************
*/
-void mii_init (void)
+static void __mii_init(void)
{
volatile immap_t *immr = (immap_t *) CFG_IMMR;
volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
- int i, j;
- for (j = 0; j < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); j++) {
-
- /* Whack a reset.
- * A delay is required between a reset of the FEC block and
- * initialization of other FEC registers because the reset takes
- * some time to complete. If you don't delay, subsequent writes
- * to FEC registers might get killed by the reset routine which is
- * still in progress.
- */
-
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
- for (i = 0;
- (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
- ++i) {
- udelay (1);
- }
- if (i == FEC_RESET_DELAY) {
+ if (fec_reset(fecp) < 0)
printf ("FEC_RESET_DELAY timeout\n");
- return;
- }
/* We use strictly polling mode only
*/
*/
fecp->fec_ievent = 0xffc0;
- /* Setup the pin configuration of the FEC(s)
- */
- fec_pin_init(ether_fcc_info[i].ether_index);
-
/* Now enable the transmit and receive processing
*/
fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
- }
+}
+
+void mii_init (void)
+{
+ int i;
+
+ __mii_init();
+
+ /* Setup the pin configuration of the FEC(s)
+ */
+ for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++)
+ fec_pin_init(ether_fcc_info[i].ether_index);
}
/*****************************************************************************
* This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
* DDR2 controller (non Denali Core). Those are 440SP/SPe.
*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* COPYRIGHT AMCC CORPORATION 2004
#define NUMMEMWORDS 8
#define NUMLOOPS 64 /* memory test loops */
-#undef CONFIG_ECC_ERROR_RESET /* test-only: see description below, at check_ecc() */
-
/*
* This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
* region. Right now the cache should still be disabled in U-Boot because of the
return;
}
-#ifdef CONFIG_ECC_ERROR_RESET
-/*
- * Check for ECC errors and reset board upon any error here
- *
- * On the Katmai 440SPe eval board, from time to time, the first
- * lword write access after DDR2 initializazion with ECC checking
- * enabled, leads to an ECC error. I couldn't find a configuration
- * without this happening. On my board with the current setup it
- * happens about 1 from 10 times.
- *
- * The ECC modules used for testing are:
- * - Kingston ValueRAM KVR667D2E5/512 (tested with 1 and 2 DIMM's)
- *
- * This has to get fixed for the Katmai and tested for the other
- * board (440SP/440SPe) that will eventually use this code in the
- * future.
- *
- * 2007-03-01, sr
- */
-static void check_ecc(void)
-{
- u32 val;
-
- mfsdram(SDRAM_ECCCR, val);
- if (val != 0) {
- printf("\nECC error: MCIF0_ECCES=%08lx MQ0_ESL=%08lx address=%08lx\n",
- val, mfdcr(0x4c), mfdcr(0x4e));
- printf("ECC error occured, resetting board...\n");
- do_reset(NULL, 0, 0, NULL);
- }
-}
-#endif
-
static void wait_ddr_idle(void)
{
u32 val;
sync();
eieio();
wait_ddr_idle();
-
-#ifdef CONFIG_ECC_ERROR_RESET
- /*
- * One write to 0 is enough to trigger this ECC error
- * (see description above)
- */
- out_be32(0, 0x12345678);
- check_ecc();
-#endif
}
}
#endif
* Read sample cycle auto-update enable
*-----------------------------------------------------------------*/
- /*
- * Modified for the Katmai platform: with some DIMMs, the DDR2
- * controller automatically selects the T2 read cycle, but this
- * proves unreliable. Go ahead and force the DDR2 controller
- * to use the T4 sample and disable the automatic update of the
- * RDSS field.
- */
mfsdram(SDRAM_RDCC, val);
mtsdram(SDRAM_RDCC,
(val & ~(SDRAM_RDCC_RDSS_MASK | SDRAM_RDCC_RSAE_MASK))
- | (SDRAM_RDCC_RDSS_T4 | SDRAM_RDCC_RSAE_DISABLE));
+ | SDRAM_RDCC_RSAE_ENABLE);
/*------------------------------------------------------------------
* Program RQDC register
{
unsigned long rfdc_reg;
unsigned long rffd;
- unsigned long rqdc_reg;
- unsigned long rqfd;
unsigned long val;
- long rqfd_average;
long rffd_average;
long max_start;
long min_end;
long max_end;
unsigned char fail_found;
unsigned char pass_found;
+#if !defined(CONFIG_DDR_RQDC_FIXED)
+ u32 rqdc_reg;
+ u32 rqfd;
u32 rqfd_start;
+ u32 rqfd_average;
+ int loopi = 0;
char str[] = "Auto calibration -";
char slash[] = "\\|/-\\|/-";
- int loopi = 0;
/*------------------------------------------------------------------
* Test to determine the best read clock delay tuning bits.
mfsdram(SDRAM_RQDC, rqdc_reg);
mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
SDRAM_RQDC_RQFD_ENCODE(rqfd_start));
+#else /* CONFIG_DDR_RQDC_FIXED */
+ /*
+ * On Katmai the complete auto-calibration somehow doesn't seem to
+ * produce the best results, meaning optimal values for RQFD/RFFD.
+ * This was discovered by GDA using a high bandwidth scope,
+ * analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
+ * so now on Katmai "only" RFFD is auto-calibrated.
+ */
+ mtsdram(SDRAM_RQDC, CONFIG_DDR_RQDC_FIXED);
+#endif /* CONFIG_DDR_RQDC_FIXED */
max_start = 0;
min_end = 0;
/* now fix RFDC[RFFD] found and find RQDC[RQFD] */
mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+#if !defined(CONFIG_DDR_RQDC_FIXED)
max_pass_length = 0;
max_start = 0;
max_end = 0;
spd_ddr_init_hang ();
}
- blank_string(strlen(str));
-
if (rqfd_average < 0)
rqfd_average = 0;
(rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
+ blank_string(strlen(str));
+#endif /* CONFIG_DDR_RQDC_FIXED */
+
+ /*
+ * Now complete RDSS configuration as mentioned on page 7 of the AMCC
+ * PowerPC440SP/SPe DDR2 application note:
+ * "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
+ */
+ mfsdram(SDRAM_RTSR, val);
+ if ((val & SDRAM_RTSR_TRK1SM_MASK) == SDRAM_RTSR_TRK1SM_ATPLS1) {
+ mfsdram(SDRAM_RDCC, val);
+ if ((val & SDRAM_RDCC_RDSS_MASK) != SDRAM_RDCC_RDSS_T4) {
+ val += 0x40000000;
+ mtsdram(SDRAM_RDCC, val);
+ }
+ }
+
mfsdram(SDRAM_DLCR, val);
debug("%s[%d] DLCR: 0x%08X\n", __FUNCTION__, __LINE__, val);
mfsdram(SDRAM_RQDC, val);
debug("%s[%d] RQDC: 0x%08X\n", __FUNCTION__, __LINE__, val);
mfsdram(SDRAM_RFDC, val);
debug("%s[%d] RFDC: 0x%08X\n", __FUNCTION__, __LINE__, val);
+ mfsdram(SDRAM_RDCC, val);
+ debug("%s[%d] RDCC: 0x%08X\n", __FUNCTION__, __LINE__, val);
}
#else /* calibration test with hardvalues */
/*-----------------------------------------------------------------------------+
#include <405_mal.h>
#include <miiphy.h>
#include <malloc.h>
-#include "vecnum.h"
+#include <asm/ppc4xx-intvec.h>
/*
* Only compile for platform with AMCC EMAC ethernet controller and
hw_p->bis = bis;
hw_p->first_init = 1;
- return (1);
+ return 0;
}
#endif
#endif
} /* end for each supported device */
- return (1);
+
+ return 0;
}
#if !defined(CONFIG_NET_MULTI)
#include <asm/processor.h>
#include <asm/io.h>
#include <watchdog.h>
-#include "vecnum.h"
+#include <asm/ppc4xx-intvec.h>
#ifdef CONFIG_SERIAL_MULTI
#include <serial.h>
#include <common.h>
#include <commproc.h>
-
+#include <asm/io.h>
#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+#if defined(CFG_POST_ALT_WORD_ADDR)
+void post_word_store (ulong a)
+{
+ out_be32((void *)CFG_POST_ALT_WORD_ADDR, a);
+}
+
+ulong post_word_load (void)
+{
+ return in_be32((void *)CFG_POST_ALT_WORD_ADDR);
+}
+#else /* CFG_POST_ALT_WORD_ADDR */
void post_word_store (ulong a)
{
volatile void *save_addr = (volatile void *)(CFG_OCM_DATA_ADDR + CFG_POST_WORD_ADDR);
volatile void *save_addr = (volatile void *)(CFG_OCM_DATA_ADDR + CFG_POST_WORD_ADDR);
return *(volatile ulong *) save_addr;
}
+#endif /* CFG_POST_ALT_WORD_ADDR */
#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
/*-----------------------------------------------------------------------------+
* denali_core_search_data_eye.
+----------------------------------------------------------------------------*/
-/*
- * Avoid conflict with implementations of denali_core_search_data_eye in board-
- * specific code.
- */
void denali_core_search_data_eye(void)
- __attribute__ ((weak, alias("__denali_core_search_data_eye")));
-
-void __denali_core_search_data_eye(void)
{
int k, j;
u32 val;
#include <asm/gpio.h>
#if defined(CFG_4xx_GPIO_TABLE)
-gpio_param_s gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CFG_4xx_GPIO_TABLE;
+gpio_param_s const gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CFG_4xx_GPIO_TABLE;
#endif
#if defined(GPIO0_OSRL)
return (in_be32((void *)GPIO0_OR + offs) & GPIO_VAL(pin) ? 1 : 0);
}
+int gpio_read_in_bit(int pin)
+{
+ u32 offs = 0;
+
+ if (pin >= GPIO_MAX) {
+ offs = 0x100;
+ pin -= GPIO_MAX;
+ }
+
+ return (in_be32((void *)GPIO0_IR + offs) & GPIO_VAL(pin) ? 1 : 0);
+}
+
#if defined(CFG_4xx_GPIO_TABLE)
void gpio_set_chip_configuration(void)
{
if ((gpio_tab[gpio_core][i].in_out == GPIO_OUT) ||
(gpio_tab[gpio_core][i].in_out == GPIO_BI)) {
+ u32 gpio_alt_sel = 0;
+
switch (gpio_tab[gpio_core][i].alt_nb) {
case GPIO_SEL:
/*
break;
case GPIO_ALT1:
- reg = in_be32((void *)GPIO_OS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (GPIO_ALT1_SEL >> (j*2));
- out_be32((void *)GPIO_OS(core_add+offs), reg);
- reg = in_be32((void *)GPIO_TS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (GPIO_ALT1_SEL >> (j*2));
- out_be32((void *)GPIO_TS(core_add+offs), reg);
+ gpio_alt_sel = GPIO_ALT1_SEL;
break;
case GPIO_ALT2:
- reg = in_be32((void *)GPIO_OS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (GPIO_ALT2_SEL >> (j*2));
- out_be32((void *)GPIO_OS(core_add+offs), reg);
- reg = in_be32((void *)GPIO_TS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (GPIO_ALT2_SEL >> (j*2));
- out_be32((void *)GPIO_TS(core_add+offs), reg);
+ gpio_alt_sel = GPIO_ALT2_SEL;
break;
case GPIO_ALT3:
+ gpio_alt_sel = GPIO_ALT3_SEL;
+ break;
+ }
+
+ if (0 != gpio_alt_sel) {
reg = in_be32((void *)GPIO_OS(core_add+offs))
& ~(GPIO_MASK >> (j*2));
- reg = reg | (GPIO_ALT3_SEL >> (j*2));
+ reg = reg | (gpio_alt_sel >> (j*2));
out_be32((void *)GPIO_OS(core_add+offs), reg);
- reg = in_be32((void *)GPIO_TS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (GPIO_ALT3_SEL >> (j*2));
- out_be32((void *)GPIO_TS(core_add+offs), reg);
- break;
+
+ if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1) {
+ reg = in_be32((void *)GPIO_TCR(core_add))
+ | (0x80000000 >> (i));
+ out_be32((void *)GPIO_TCR(core_add), reg);
+ reg = in_be32((void *)GPIO_TS(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ out_be32((void *)GPIO_TS(core_add+offs), reg);
+ } else {
+ reg = in_be32((void *)GPIO_TCR(core_add))
+ & ~(0x80000000 >> (i));
+ out_be32((void *)GPIO_TCR(core_add), reg);
+ reg = in_be32((void *)GPIO_TS(core_add+offs))
+ & ~(GPIO_MASK >> (j*2));
+ reg = reg | (gpio_alt_sel >> (j*2));
+ out_be32((void *)GPIO_TS(core_add+offs), reg);
+ }
}
}
}
#include <ppc4xx.h>
#include <ppc_asm.tmpl>
#include <commproc.h>
-#include "vecnum.h"
+#include <asm/ppc4xx-intvec.h>
DECLARE_GLOBAL_DATA_PTR;
#include <asm/processor.h>
#include <asm/io.h>
#include <watchdog.h>
-#include "vecnum.h"
+#include <asm/ppc4xx-intvec.h>
#ifdef CONFIG_SERIAL_MULTI
#include <serial.h>
dcbz r0,r3
addi r3,r3,32
bdnz ..d_ag
+
+ /*
+ * Lock the init-ram/stack in d-cache, so that other regions
+ * may use d-cache as well
+ * Note, that this current implementation locks exactly 4k
+ * of d-cache, so please make sure that you don't define a
+ * bigger init-ram area. Take a look at the lwmon5 440EPx
+ * implementation as a reference.
+ */
+ msync
+ isync
+ /* 8. set TFLOOR/NFLOOR to 8 (-> 8*16*32 bytes locked -> 4k) */
+ lis r1,0x0201
+ ori r1,r1,0xf808
+ mtspr dvlim,r1
+ lis r1,0x0808
+ ori r1,r1,0x0808
+ mtspr dnv0,r1
+ mtspr dnv1,r1
+ mtspr dnv2,r1
+ mtspr dnv3,r1
+ mtspr dtv0,r1
+ mtspr dtv1,r1
+ mtspr dtv2,r1
+ mtspr dtv3,r1
+ msync
+ isync
#endif /* CFG_INIT_RAM_DCACHE */
/* 440EP & 440GR are only 440er PPC's without internal SRAM */
mr r4,r10
mr r5,r11
#endif
+
+#ifdef CFG_INIT_RAM_DCACHE
+ /*
+ * Unlock the previously locked d-cache
+ */
+ msync
+ isync
+ /* set TFLOOR/NFLOOR to 0 again */
+ lis r6,0x0001
+ ori r6,r6,0xf800
+ mtspr dvlim,r6
+ lis r6,0x0000
+ ori r6,r6,0x0000
+ mtspr dnv0,r6
+ mtspr dnv1,r6
+ mtspr dnv2,r6
+ mtspr dnv3,r6
+ mtspr dtv0,r6
+ mtspr dtv1,r6
+ mtspr dtv2,r6
+ mtspr dtv3,r6
+ msync
+ isync
+#endif /* CFG_INIT_RAM_DCACHE */
+
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#include <usb.h>
#include "usbdev.h"
-#include "vecnum.h"
+#include <asm/ppc4xx-intvec.h>
#define USB_DT_DEVICE 0x01
#define USB_DT_CONFIG 0x02
+++ /dev/null
-/*
-* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
-
-/*
- * Interrupt vector number definitions to ease the
- * 405 -- 440 porting pain ;-)
- *
- * NOTE: They're not all here yet ... update as needed.
- *
- */
-
-#ifndef _VECNUMS_H_
-#define _VECNUMS_H_
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-
-/* UIC 0 */
-#define VECNUM_U0 0 /* UART 0 */
-#define VECNUM_U1 1 /* UART 1 */
-#define VECNUM_IIC0 2 /* IIC */
-#define VECNUM_KRD 3 /* Kasumi Ready for data */
-#define VECNUM_KDA 4 /* Kasumi Data Available */
-#define VECNUM_PCRW 5 /* PCI command register write */
-#define VECNUM_PPM 6 /* PCI power management */
-#define VECNUM_IIC1 7 /* IIC */
-#define VECNUM_SPI 8 /* SPI */
-#define VECNUM_EPCISER 9 /* External PCI SERR */
-#define VECNUM_MTE 10 /* MAL TXEOB */
-#define VECNUM_MRE 11 /* MAL RXEOB */
-#define VECNUM_D0 12 /* DMA channel 0 */
-#define VECNUM_D1 13 /* DMA channel 1 */
-#define VECNUM_D2 14 /* DMA channel 2 */
-#define VECNUM_D3 15 /* DMA channel 3 */
-#define VECNUM_UD0 16 /* UDMA irq 0 */
-#define VECNUM_UD1 17 /* UDMA irq 1 */
-#define VECNUM_UD2 18 /* UDMA irq 2 */
-#define VECNUM_UD3 19 /* UDMA irq 3 */
-#define VECNUM_HSB2D 20 /* USB2.0 Device */
-#define VECNUM_USBDEV 20 /* USB 1.1/USB 2.0 Device */
-#define VECNUM_OHCI1 21 /* USB2.0 Host OHCI irq 1 */
-#define VECNUM_OHCI2 22 /* USB2.0 Host OHCI irq 2 */
-#define VECNUM_EIP94 23 /* Security EIP94 */
-#define VECNUM_ETH0 24 /* Emac 0 */
-#define VECNUM_ETH1 25 /* Emac 1 */
-#define VECNUM_EHCI 26 /* USB2.0 Host EHCI */
-#define VECNUM_EIR4 27 /* External interrupt 4 */
-#define VECNUM_UIC2NC 28 /* UIC2 non-critical interrupt */
-#define VECNUM_UIC2C 29 /* UIC2 critical interrupt */
-#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
-#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
-
-/* UIC 1 */
-#define VECNUM_MS (32 + 0) /* MAL SERR */
-#define VECNUM_MTDE (32 + 1) /* MAL TXDE */
-#define VECNUM_MRDE (32 + 2) /* MAL RXDE */
-#define VECNUM_U2 (32 + 3) /* UART 2 */
-#define VECNUM_U3 (32 + 4) /* UART 3 */
-#define VECNUM_EBCO (32 + 5) /* EBCO interrupt status */
-#define VECNUM_NDFC (32 + 6) /* NDFC */
-#define VECNUM_KSLE (32 + 7) /* KASUMI slave error */
-#define VECNUM_CT5 (32 + 8) /* GPT compare timer 5 */
-#define VECNUM_CT6 (32 + 9) /* GPT compare timer 6 */
-#define VECNUM_PLB34I0 (32 + 10) /* PLB3X4X MIRQ0 */
-#define VECNUM_PLB34I1 (32 + 11) /* PLB3X4X MIRQ1 */
-#define VECNUM_PLB34I2 (32 + 12) /* PLB3X4X MIRQ2 */
-#define VECNUM_PLB34I3 (32 + 13) /* PLB3X4X MIRQ3 */
-#define VECNUM_PLB34I4 (32 + 14) /* PLB3X4X MIRQ4 */
-#define VECNUM_PLB34I5 (32 + 15) /* PLB3X4X MIRQ5 */
-#define VECNUM_CT0 (32 + 16) /* GPT compare timer 0 */
-#define VECNUM_CT1 (32 + 17) /* GPT compare timer 1 */
-#define VECNUM_EIR7 (32 + 18) /* External interrupt 7 */
-#define VECNUM_EIR8 (32 + 19) /* External interrupt 8 */
-#define VECNUM_EIR9 (32 + 20) /* External interrupt 9 */
-#define VECNUM_CT2 (32 + 21) /* GPT compare timer 2 */
-#define VECNUM_CT3 (32 + 22) /* GPT compare timer 3 */
-#define VECNUM_CT4 (32 + 23) /* GPT compare timer 4 */
-#define VECNUM_SRE (32 + 24) /* Serial ROM error */
-#define VECNUM_GPTDC (32 + 25) /* GPT decrementer pulse */
-#define VECNUM_RSVD0 (32 + 26) /* Reserved */
-#define VECNUM_EPCIPER (32 + 27) /* External PCI PERR */
-#define VECNUM_EIR0 (32 + 28) /* External interrupt 0 */
-#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */
-#define VECNUM_EIR1 (32 + 30) /* External interrupt 1 */
-#define VECNUM_EWU1 (32 + 31) /* Ethernet 1 wakeup */
-
-#define VECNUM_TXDE VECNUM_MTDE
-#define VECNUM_RXDE VECNUM_MRDE
-
-/* UIC 2 */
-#define VECNUM_EIR5 (62 + 0) /* External interrupt 5 */
-#define VECNUM_EIR6 (62 + 1) /* External interrupt 6 */
-#define VECNUM_OPB (62 + 2) /* OPB to PLB bridge int stat */
-#define VECNUM_EIR2 (62 + 3) /* External interrupt 2 */
-#define VECNUM_EIR3 (62 + 4) /* External interrupt 3 */
-#define VECNUM_DDR2 (62 + 5) /* DDR2 sdram */
-#define VECNUM_MCTX0 (62 + 6) /* MAl intp coalescence TX0 */
-#define VECNUM_MCTX1 (62 + 7) /* MAl intp coalescence TX1 */
-#define VECNUM_MCTR0 (62 + 8) /* MAl intp coalescence TR0 */
-#define VECNUM_MCTR1 (62 + 9) /* MAl intp coalescence TR1 */
-
-#elif defined(CONFIG_440SPE)
-
-/* UIC 0 */
-#define VECNUM_U0 0 /* UART0 */
-#define VECNUM_U1 1 /* UART1 */
-#define VECNUM_IIC0 2 /* IIC0 */
-#define VECNUM_IIC1 3 /* IIC1 */
-#define VECNUM_PIM 4 /* PCI inbound message */
-#define VECNUM_PCRW 5 /* PCI command reg write */
-#define VECNUM_PPM 6 /* PCI power management */
-#define VECNUM_MSI0 7 /* PCI MSI level 0 */
-#define VECNUM_MSI1 8 /* PCI MSI level 0 */
-#define VECNUM_MSI2 9 /* PCI MSI level 0 */
-#define VECNUM_D0 12 /* DMA channel 0 */
-#define VECNUM_D1 13 /* DMA channel 1 */
-#define VECNUM_D2 14 /* DMA channel 2 */
-#define VECNUM_D3 15 /* DMA channel 3 */
-#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
-#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
-
-/* UIC 1 */
-#define VECNUM_MS (32 + 1 ) /* MAL SERR */
-#define VECNUM_TXDE (32 + 2 ) /* MAL TXDE */
-#define VECNUM_RXDE (32 + 3 ) /* MAL RXDE */
-#define VECNUM_MTE (32 + 6 ) /* MAL Tx EOB */
-#define VECNUM_MRE (32 + 7 ) /* MAL Rx EOB */
-#define VECNUM_CT0 (32 + 12 ) /* GPT compare timer 0 */
-#define VECNUM_CT1 (32 + 13 ) /* GPT compare timer 1 */
-#define VECNUM_CT2 (32 + 14 ) /* GPT compare timer 2 */
-#define VECNUM_CT3 (32 + 15 ) /* GPT compare timer 3 */
-#define VECNUM_CT4 (32 + 16 ) /* GPT compare timer 4 */
-#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */
-#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */
-
-/* UIC 2 */
-#define VECNUM_EIR5 (62 + 24) /* External interrupt 5 */
-#define VECNUM_EIR4 (62 + 25) /* External interrupt 4 */
-#define VECNUM_EIR3 (62 + 26) /* External interrupt 3 */
-#define VECNUM_EIR2 (62 + 27) /* External interrupt 2 */
-#define VECNUM_EIR1 (62 + 28) /* External interrupt 1 */
-#define VECNUM_EIR0 (62 + 29) /* External interrupt 0 */
-
-#elif defined(CONFIG_440SP)
-
-/* UIC 0 */
-#define VECNUM_U0 0 /* UART0 */
-#define VECNUM_U1 1 /* UART1 */
-#define VECNUM_IIC0 2 /* IIC0 */
-#define VECNUM_IIC1 3 /* IIC1 */
-#define VECNUM_PIM 4 /* PCI inbound message */
-#define VECNUM_PCRW 5 /* PCI command reg write */
-#define VECNUM_PPM 6 /* PCI power management */
-#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
-#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
-
-/* UIC 1 */
-#define VECNUM_EIR0 (32 + 0) /* External interrupt 0 */
-#define VECNUM_MS (32 + 1) /* MAL SERR */
-#define VECNUM_TXDE (32 + 2) /* MAL TXDE */
-#define VECNUM_RXDE (32 + 3) /* MAL RXDE */
-#define VECNUM_MTE (32 + 6) /* MAL Tx EOB */
-#define VECNUM_MRE (32 + 7) /* MAL Rx EOB */
-#define VECNUM_CT0 (32 + 12) /* GPT compare timer 0 */
-#define VECNUM_CT1 (32 + 13) /* GPT compare timer 1 */
-#define VECNUM_CT2 (32 + 14) /* GPT compare timer 2 */
-#define VECNUM_CT3 (32 + 15) /* GPT compare timer 3 */
-#define VECNUM_CT4 (32 + 16) /* GPT compare timer 4 */
-#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */
-#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */
-
-#elif defined(CONFIG_440)
-
-/* UIC 0 */
-#define VECNUM_U0 0 /* UART0 */
-#define VECNUM_U1 1 /* UART1 */
-#define VECNUM_IIC0 2 /* IIC0 */
-#define VECNUM_IIC1 3 /* IIC1 */
-#define VECNUM_PIM 4 /* PCI inbound message */
-#define VECNUM_PCRW 5 /* PCI command reg write */
-#define VECNUM_PPM 6 /* PCI power management */
-#define VECNUM_MSI0 7 /* PCI MSI level 0 */
-#define VECNUM_MSI1 8 /* PCI MSI level 0 */
-#define VECNUM_MSI2 9 /* PCI MSI level 0 */
-#define VECNUM_MTE 10 /* MAL TXEOB */
-#define VECNUM_MRE 11 /* MAL RXEOB */
-#define VECNUM_D0 12 /* DMA channel 0 */
-#define VECNUM_D1 13 /* DMA channel 1 */
-#define VECNUM_D2 14 /* DMA channel 2 */
-#define VECNUM_D3 15 /* DMA channel 3 */
-#define VECNUM_CT0 18 /* GPT compare timer 0 */
-#define VECNUM_CT1 19 /* GPT compare timer 1 */
-#define VECNUM_CT2 20 /* GPT compare timer 2 */
-#define VECNUM_CT3 21 /* GPT compare timer 3 */
-#define VECNUM_CT4 22 /* GPT compare timer 4 */
-#define VECNUM_EIR0 23 /* External interrupt 0 */
-#define VECNUM_EIR1 24 /* External interrupt 1 */
-#define VECNUM_EIR2 25 /* External interrupt 2 */
-#define VECNUM_EIR3 26 /* External interrupt 3 */
-#define VECNUM_EIR4 27 /* External interrupt 4 */
-#define VECNUM_EIR5 28 /* External interrupt 5 */
-#define VECNUM_EIR6 29 /* External interrupt 6 */
-#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
-#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
-
-/* UIC 1 */
-#define VECNUM_MS (32 + 0 ) /* MAL SERR */
-#define VECNUM_TXDE (32 + 1 ) /* MAL TXDE */
-#define VECNUM_RXDE (32 + 2 ) /* MAL RXDE */
-#define VECNUM_USBDEV (32 + 23) /* USB 1.1/USB 2.0 Device */
-#define VECNUM_ETH0 (32 + 28) /* Ethernet 0 interrupt status */
-#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */
-
-#else /* !defined(CONFIG_440) */
-
-#if defined(CONFIG_405EZ)
-#define VECNUM_D0 0 /* DMA channel 0 */
-#define VECNUM_D1 1 /* DMA channel 1 */
-#define VECNUM_D2 2 /* DMA channel 2 */
-#define VECNUM_D3 3 /* DMA channel 3 */
-#define VECNUM_1588 4 /* IEEE 1588 network synchronization */
-#define VECNUM_U0 5 /* UART0 */
-#define VECNUM_U1 6 /* UART1 */
-#define VECNUM_CAN0 7 /* CAN 0 */
-#define VECNUM_CAN1 8 /* CAN 1 */
-#define VECNUM_SPI 9 /* SPI */
-#define VECNUM_IIC0 10 /* I2C */
-#define VECNUM_CHT0 11 /* Chameleon timer high pri interrupt */
-#define VECNUM_CHT1 12 /* Chameleon timer high pri interrupt */
-#define VECNUM_USBH1 13 /* USB Host 1 */
-#define VECNUM_USBH2 14 /* USB Host 2 */
-#define VECNUM_USBDEV 15 /* USB Device */
-#define VECNUM_ETH0 16 /* 10/100 Ethernet interrupt status */
-#define VECNUM_EWU0 17 /* Ethernet wakeup sequence detected */
-
-#define VECNUM_MADMAL 18 /* Logical OR of following MadMAL int */
-#define VECNUM_MS 18 /* MAL_SERR_INT */
-#define VECNUM_TXDE 18 /* MAL_TXDE_INT */
-#define VECNUM_RXDE 18 /* MAL_RXDE_INT */
-
-#define VECNUM_MTE 19 /* MAL TXEOB */
-#define VECNUM_MTE1 20 /* MAL TXEOB1 */
-#define VECNUM_MRE 21 /* MAL RXEOB */
-#define VECNUM_NAND 22 /* NAND Flash controller */
-#define VECNUM_ADC 23 /* ADC */
-#define VECNUM_DAC 24 /* DAC */
-#define VECNUM_OPB2PLB 25 /* OPB to PLB bridge interrupt */
-#define VECNUM_RESERVED0 26 /* Reserved */
-#define VECNUM_EIR0 27 /* External interrupt 0 */
-#define VECNUM_EIR1 28 /* External interrupt 1 */
-#define VECNUM_EIR2 29 /* External interrupt 2 */
-#define VECNUM_EIR3 30 /* External interrupt 3 */
-#define VECNUM_EIR4 31 /* External interrupt 4 */
-
-#elif defined(CONFIG_405EX)
-
-/* UIC 0 */
-#define VECNUM_U0 00
-#define VECNUM_U1 01
-#define VECNUM_IIC0 02
-#define VECNUM_PKA 03
-#define VECNUM_TRNG 04
-#define VECNUM_EBM 05
-#define VECNUM_BGI 06
-#define VECNUM_IIC1 07
-#define VECNUM_SPI 08
-#define VECNUM_EIR0 09
-#define VECNUM_MTE 10 /* MAL Tx EOB */
-#define VECNUM_MRE 11 /* MAL Rx EOB */
-#define VECNUM_DMA0 12
-#define VECNUM_DMA1 13
-#define VECNUM_DMA2 14
-#define VECNUM_DMA3 15
-#define VECNUM_PCIE0AL 16
-#define VECNUM_PCIE0VPD 17
-#define VECNUM_RPCIE0HRST 18
-#define VECNUM_FPCIE0HRST 19
-#define VECNUM_PCIE0TCR 20
-#define VECNUM_PCIEMSI0 21
-#define VECNUM_PCIEMSI1 22
-#define VECNUM_SECURITY 23
-#define VECNUM_ETH0 24
-#define VECNUM_ETH1 25
-#define VECNUM_PCIEMSI2 26
-#define VECNUM_EIR4 27
-#define VECNUM_UIC2NC 28
-#define VECNUM_UIC2C 29
-#define VECNUM_UIC1NC 30
-#define VECNUM_UIC1C 31
-
-/* UIC 1 */
-#define VECNUM_MS (32 + 00) /* MAL SERR */
-#define VECNUM_TXDE (32 + 01) /* MAL TXDE */
-#define VECNUM_RXDE (32 + 02) /* MAL RXDE */
-#define VECNUM_PCIE0BMVC0 (32 + 03)
-#define VECNUM_PCIE0DCRERR (32 + 04)
-#define VECNUM_EBC (32 + 05)
-#define VECNUM_NDFC (32 + 06)
-#define VECNUM_PCEI1DCRERR (32 + 07)
-#define VECNUM_CT8 (32 + 08)
-#define VECNUM_CT9 (32 + 09)
-#define VECNUM_PCIE1AL (32 + 10)
-#define VECNUM_PCIE1VPD (32 + 11)
-#define VECNUM_RPCE1HRST (32 + 12)
-#define VECNUM_FPCE1HRST (32 + 13)
-#define VECNUM_PCIE1TCR (32 + 14)
-#define VECNUM_PCIE1VC0 (32 + 15)
-#define VECNUM_CT3 (32 + 16)
-#define VECNUM_CT4 (32 + 17)
-#define VECNUM_EIR7 (32 + 18)
-#define VECNUM_EIR8 (32 + 19)
-#define VECNUM_EIR9 (32 + 20)
-#define VECNUM_CT5 (32 + 21)
-#define VECNUM_CT6 (32 + 22)
-#define VECNUM_CT7 (32 + 23)
-#define VECNUM_SROM (32 + 24) /* SERIAL ROM */
-#define VECNUM_GPTDECPULS (32 + 25) /* GPT Decrement pulse */
-#define VECNUM_EIR2 (32 + 26)
-#define VECNUM_EIR5 (32 + 27)
-#define VECNUM_EIR6 (32 + 28)
-#define VECNUM_EMAC0WAKE (32 + 29)
-#define VECNUM_EIR1 (32 + 30)
-#define VECNUM_EMAC1WAKE (32 + 31)
-
-/* UIC 2 */
-#define VECNUM_PCIE0INTA (64 + 00) /* PCIE0 INTA */
-#define VECNUM_PCIE0INTB (64 + 01) /* PCIE0 INTB */
-#define VECNUM_PCIE0INTC (64 + 02) /* PCIE0 INTC */
-#define VECNUM_PCIE0INTD (64 + 03) /* PCIE0 INTD */
-#define VECNUM_EIR3 (64 + 04) /* External IRQ 3 */
-#define VECNUM_DDRMCUE (64 + 05)
-#define VECNUM_DDRMCCE (64 + 06)
-#define VECNUM_MALINTCOATX0 (64 + 07) /* Interrupt coalecence TX0 */
-#define VECNUM_MALINTCOATX1 (64 + 08) /* Interrupt coalecence TX1 */
-#define VECNUM_MALINTCOARX0 (64 + 09) /* Interrupt coalecence RX0 */
-#define VECNUM_MALINTCOARX1 (64 + 10) /* Interrupt coalecence RX1 */
-#define VECNUM_PCIE1INTA (64 + 11) /* PCIE0 INTA */
-#define VECNUM_PCIE1INTB (64 + 12) /* PCIE0 INTB */
-#define VECNUM_PCIE1INTC (64 + 13) /* PCIE0 INTC */
-#define VECNUM_PCIE1INTD (64 + 14) /* PCIE0 INTD */
-#define VECNUM_RPCIEMSI2 (64 + 15) /* MSI level 2 */
-#define VECNUM_PCIEMSI3 (64 + 16) /* MSI level 2 */
-#define VECNUM_PCIEMSI4 (64 + 17) /* MSI level 2 */
-#define VECNUM_PCIEMSI5 (64 + 18) /* MSI level 2 */
-#define VECNUM_PCIEMSI6 (64 + 19) /* MSI level 2 */
-#define VECNUM_PCIEMSI7 (64 + 20) /* MSI level 2 */
-#define VECNUM_PCIEMSI8 (64 + 21) /* MSI level 2 */
-#define VECNUM_PCIEMSI9 (64 + 22) /* MSI level 2 */
-#define VECNUM_PCIEMSI10 (64 + 23) /* MSI level 2 */
-#define VECNUM_PCIEMSI11 (64 + 24) /* MSI level 2 */
-#define VECNUM_PCIEMSI12 (64 + 25) /* MSI level 2 */
-#define VECNUM_PCIEMSI13 (64 + 26) /* MSI level 2 */
-#define VECNUM_PCIEMSI14 (64 + 27) /* MSI level 2 */
-#define VECNUM_PCIEMSI15 (64 + 28) /* MSI level 2 */
-#define VECNUM_PLB4XAHB (64 + 29) /* PLBxAHB bridge */
-#define VECNUM_USBWAKE (64 + 30) /* USB wakup */
-#define VECNUM_USBOTG (64 + 31) /* USB OTG */
-
-#else /* !CONFIG_405EZ */
-
-#define VECNUM_U0 0 /* UART0 */
-#define VECNUM_U1 1 /* UART1 */
-#define VECNUM_D0 5 /* DMA channel 0 */
-#define VECNUM_D1 6 /* DMA channel 1 */
-#define VECNUM_D2 7 /* DMA channel 2 */
-#define VECNUM_D3 8 /* DMA channel 3 */
-#define VECNUM_EWU0 9 /* Ethernet wakeup */
-#define VECNUM_MS 10 /* MAL SERR */
-#define VECNUM_MTE 11 /* MAL TXEOB */
-#define VECNUM_MRE 12 /* MAL RXEOB */
-#define VECNUM_TXDE 13 /* MAL TXDE */
-#define VECNUM_RXDE 14 /* MAL RXDE */
-#define VECNUM_ETH0 15 /* Ethernet interrupt status */
-#define VECNUM_EIR0 25 /* External interrupt 0 */
-#define VECNUM_EIR1 26 /* External interrupt 1 */
-#define VECNUM_EIR2 27 /* External interrupt 2 */
-#define VECNUM_EIR3 28 /* External interrupt 3 */
-#define VECNUM_EIR4 29 /* External interrupt 4 */
-#define VECNUM_EIR5 30 /* External interrupt 5 */
-#define VECNUM_EIR6 31 /* External interrupt 6 */
-#endif /* defined(CONFIG_405EZ) */
-
-#endif /* defined(CONFIG_440) */
-
-#endif /* _VECNUMS_H_ */
--- /dev/null
+Freescale MPC837xEMDS Board
+-----------------------------------------
+1. Board Switches and Jumpers
+1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC837xEMDS board
+ For some reason, the HW designers describe the switch settings
+ in terms of 0 and 1, and then map that to physical switches where
+ the label "On" refers to logic 0 and "Off" is logic 1.
+
+ Switch bits are numbered 1 through, like, 4 6 8 or 10, but the
+ bits may contribute to signals that are numbered based at 0,
+ and some of those signals may be high-bit-number-0 too. Heed
+ well the names and labels and do not get confused.
+
+ "Off" == 1
+ "On" == 0
+
+ SW4[8] is the bit labled 8 on Switch 4.
+ SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2.
+ SW2[1:8]= 0000_0001 refers to bits labeled 1 through 7 is set as "On"
+ and bits labeled 8 is set as "Off".
+
+1.1 For the MPC837xEMDS Processor Board
+
+ First, make sure the board default setting is consistent with the
+ document shipped with your board. Then apply the following setting:
+ SW3[1-8]= 0011_0000 (BOOTSEQ, ROMLOC setting)
+ SW4[1-8]= 0000_0110 (core PLL setting)
+ SW5[1-8]= 1001_1000 (system PLL, boot up from low end of flash)
+ SW6[1-8]= 0000_1000 (HRCW is read from NOR FLASH)
+ SW7[1-8]= 0110_1101 (TSEC1/2 interface setting - RGMII)
+ J3 2-3, TSEC1 LVDD1 with 2.5V
+ J6 2-3, TSEC2 LVDD2 with 2.5V
+ J9 2-3, CLKIN from osc on board
+ J10 removed, CS0 connect to NOR flash; when mounted, CS0 connect to NAND
+ J11 removed, Hardware Reset Configuration Word load from FLASH(NOR or NAND)
+ mounted, HRCW load from BCSR.
+
+ on board Oscillator: 66M
+
+2. Memory Map
+
+2.1. The memory map should look pretty much like this:
+
+ 0x0000_0000 0x7fff_ffff DDR 2G
+ 0x8000_0000 0x8fff_ffff PCI MEM prefetch 256M
+ 0x9000_0000 0x9fff_ffff PCI MEM non-prefetch 256M
+ 0xc000_0000 0xdfff_ffff Empty 512M
+ 0xe000_0000 0xe00f_ffff Int Mem Reg Space 1M
+ 0xe010_0000 0xe02f_ffff Empty 2M
+ 0xe030_0000 0xe03f_ffff PCI IO 1M
+ 0xe040_0000 0xe05f_ffff Empty 2M
+ 0xe060_0000 0xe060_8000 NAND Flash 32K
+ 0xf400_0000 0xf7ff_ffff Empty 64M
+ 0xf800_0000 0xf800_7fff BCSR on CS1 32K
+ 0xfe00_0000 0xffff_ffff NOR Flash on CS0 32M
+
+3. Definitions
+
+3.1 Explanation of NEW definitions in:
+
+ include/configs/MPC837XEMDS.h
+
+ CONFIG_MPC83XX MPC83xx family for both MPC837x and MPC8360
+ CONFIG_MPC837X MPC837x specific
+ CONFIG_MPC837XEMDS MPC837XEMDS board specific
+
+4. Compilation
+
+ Assuming you're using BASH shell:
+
+ export CROSS_COMPILE=your-cross-compile-prefix
+ cd u-boot
+ make distclean
+ make MPC837XEMDS_config
+ make
+
+5. Downloading and Flashing Images
+
+5.0 Download over serial line using Kermit:
+
+ loadb
+ [Drop to kermit:
+ ^\c
+ send <u-boot-bin-image>
+ c
+ ]
+
+
+ Or via tftp:
+
+ tftp 40000 u-boot.bin
+
+5.1 Reflash U-boot Image using U-boot
+
+ tftp 40000 u-boot.bin
+ protect off fe000000 fe1fffff
+ erase fe000000 fe1fffff
+
+ cp.b 40000 fe000000 xxxx
+
+You have to supply the correct byte count with 'xxxx' from the TFTP result log.
+
+6. Notes
+ 1) The console baudrate for MPC837XEMDS is 115200bps.
--- /dev/null
+Freescale MPC8610HPCD board
+===========================
+
+
+Building U-Boot
+---------------
+
+ $ make MPC8610HPCD_config
+ Configuring for MPC8610HPCD board...
+
+ $ make
+
+
+Flashing U-Boot
+---------------
+The flash is 128M starting at 0xF800_0000.
+
+The alternate image is at 0xFBF0_0000
+The boot image is at 0xFFF0_0000.
+
+
+To Flash U-Boot into the booting bank:
+
+ tftp 1000000 u-boot.bin
+ protect off all
+ erase fff00000 +$filesize
+ cp.b 1000000 fff00000 $filesize
+
+
+To Flash U-boot into the alternate bank
+
+ tftp 1000000 u-boot.bin
+ erase fbf00000 +$filesize
+ cp.b 1000000 fbf00000 $filesize
+
+
+pixis_reset command
+-------------------
+A new command, "pixis_reset", is introduced to reset mpc8610hpcd board
+using the FPGA sequencer. When the board restarts, it has the option
+of using either the current or alternate flash bank as the boot
+image, with or without the watchdog timer enabled, and finally with
+or without frequency changes.
+
+Usage is;
+
+ pixis_reset
+ pixis_reset altbank
+ pixis_reset altbank wd
+ pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
+ pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
+
+Examples;
+
+ /* reset to current bank, like "reset" command */
+ pixis_reset
+
+ /* reset board but use the to alternate flash bank */
+ pixis_reset altbank
+
+ /* reset board, use alternate flash bank with watchdog timer enabled*/
+ pixis_reset altbank wd
+
+ /* reset board to alternate bank with frequency changed.
+ * 40 is SYSCLK, 2.5 is COREPLL ratio, 10 is MPXPLL ratio
+ */
+ pixis-reset altbank cf 40 2.5 10
*
* Indent Options: indent -kr -i8
***************************************************************************/
-
+/*
+ * 26 August 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
+ * Modified to use le32_to_cpu and cpu_to_le32 properly
+ */
#include <common.h>
#include <malloc.h>
#include <net.h>
static u32 ioaddr;
/* Condensed operations for readability. */
-#define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr))
-#define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr))
-
#define currticks() get_timer(0)
-#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
-#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
/* media options */
#define MAX_UNITS 8
#define RTL_MIN_IO_SIZE 0x80
#define TX_TIMEOUT (6*HZ)
-/* write/read MMIO register */
+/* write/read MMIO register. Notice: {read,write}[wl] do the necessary swapping */
#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg))
#define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg))
#define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg))
PHY_Enable_Auto_Nego = 0x1000,
/* PHY_STAT_REG = 1; */
- PHY_Auto_Neco_Comp = 0x0020,
+ PHY_Auto_Nego_Comp = 0x0020,
/* PHY_AUTO_NEGO_REG = 4; */
PHY_Cap_10_Half = 0x0020,
ioaddr = dev->iobase;
cur_rx = tpc->cur_rx;
- if ((tpc->RxDescArray[cur_rx].status & OWNbit) == 0) {
- if (!(tpc->RxDescArray[cur_rx].status & RxRES)) {
+ if ((le32_to_cpu(tpc->RxDescArray[cur_rx].status) & OWNbit) == 0) {
+ if (!(le32_to_cpu(tpc->RxDescArray[cur_rx].status) & RxRES)) {
unsigned char rxdata[RX_BUF_LEN];
- length = (int) (tpc->RxDescArray[cur_rx].
- status & 0x00001FFF) - 4;
+ length = (int) (le32_to_cpu(tpc->RxDescArray[cur_rx].
+ status) & 0x00001FFF) - 4;
memcpy(rxdata, tpc->RxBufferRing[cur_rx], length);
NetReceive(rxdata, length);
if (cur_rx == NUM_RX_DESC - 1)
tpc->RxDescArray[cur_rx].status =
- (OWNbit | EORbit) + RX_BUF_SIZE;
+ cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE);
else
tpc->RxDescArray[cur_rx].status =
- OWNbit + RX_BUF_SIZE;
+ cpu_to_le32(OWNbit + RX_BUF_SIZE);
tpc->RxDescArray[cur_rx].buf_addr =
- virt_to_bus(tpc->RxBufferRing[cur_rx]);
+ cpu_to_le32(tpc->RxBufferRing[cur_rx]);
} else {
puts("Error Rx");
}
u8 *ptxb;
int entry = tpc->cur_tx % NUM_TX_DESC;
u32 len = length;
+ int ret;
#ifdef DEBUG_RTL8169_TX
int stime = currticks();
while (len < ETH_ZLEN)
ptxb[len++] = '\0';
- tpc->TxDescArray[entry].buf_addr = virt_to_bus(ptxb);
+ tpc->TxDescArray[entry].buf_addr = cpu_to_le32(ptxb);
if (entry != (NUM_TX_DESC - 1)) {
tpc->TxDescArray[entry].status =
- (OWNbit | FSbit | LSbit) | ((len > ETH_ZLEN) ?
- len : ETH_ZLEN);
+ cpu_to_le32((OWNbit | FSbit | LSbit) |
+ ((len > ETH_ZLEN) ? len : ETH_ZLEN));
} else {
tpc->TxDescArray[entry].status =
- (OWNbit | EORbit | FSbit | LSbit) |
- ((len > ETH_ZLEN) ? length : ETH_ZLEN);
+ cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) |
+ ((len > ETH_ZLEN) ? len : ETH_ZLEN));
}
RTL_W8(TxPoll, 0x40); /* set polling bit */
tpc->cur_tx++;
to = currticks() + TX_TIMEOUT;
- while ((tpc->TxDescArray[entry].status & OWNbit) && (currticks() < to)); /* wait */
+ while ((le32_to_cpu(tpc->TxDescArray[entry].status) & OWNbit)
+ && (currticks() < to)); /* wait */
if (currticks() >= to) {
#ifdef DEBUG_RTL8169_TX
puts ("tx timeout/error\n");
printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime);
#endif
- return 0;
+ ret = 0;
} else {
#ifdef DEBUG_RTL8169_TX
puts("tx done\n");
#endif
- return length;
+ ret = length;
}
+ /* Delay to make net console (nc) work properly */
+ udelay(20);
+ return ret;
}
static void rtl8169_set_rx_mode(struct eth_device *dev)
tpc->cur_rx = 0;
- RTL_W32(TxDescStartAddr, virt_to_le32desc(tpc->TxDescArray));
- RTL_W32(RxDescStartAddr, virt_to_le32desc(tpc->RxDescArray));
+ RTL_W32(TxDescStartAddr, tpc->TxDescArray);
+ RTL_W32(RxDescStartAddr, tpc->RxDescArray);
RTL_W8(Cfg9346, Cfg9346_Lock);
udelay(10);
for (i = 0; i < NUM_RX_DESC; i++) {
if (i == (NUM_RX_DESC - 1))
tpc->RxDescArray[i].status =
- (OWNbit | EORbit) + RX_BUF_SIZE;
+ cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE);
else
- tpc->RxDescArray[i].status = OWNbit + RX_BUF_SIZE;
+ tpc->RxDescArray[i].status =
+ cpu_to_le32(OWNbit + RX_BUF_SIZE);
tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE];
tpc->RxDescArray[i].buf_addr =
- virt_to_bus(tpc->RxBufferRing[i]);
+ cpu_to_le32(tpc->RxBufferRing[i]);
}
#ifdef DEBUG_RTL8169
static void rtl_reset(struct eth_device *dev, bd_t *bis)
{
int i;
- u8 diff;
- u32 TxPhyAddr, RxPhyAddr;
#ifdef DEBUG_RTL8169
int stime = currticks();
#endif
tpc->TxDescArrays = tx_ring;
- if (tpc->TxDescArrays == 0)
- puts("Allot Error");
/* Tx Desscriptor needs 256 bytes alignment; */
- TxPhyAddr = virt_to_bus(tpc->TxDescArrays);
- diff = 256 - (TxPhyAddr - ((TxPhyAddr >> 8) << 8));
- TxPhyAddr += diff;
- tpc->TxDescArray = (struct TxDesc *) (tpc->TxDescArrays + diff);
+ tpc->TxDescArray = (struct TxDesc *) ((unsigned long)(tpc->TxDescArrays +
+ 255) & ~255);
tpc->RxDescArrays = rx_ring;
/* Rx Desscriptor needs 256 bytes alignment; */
- RxPhyAddr = virt_to_bus(tpc->RxDescArrays);
- diff = 256 - (RxPhyAddr - ((RxPhyAddr >> 8) << 8));
- RxPhyAddr += diff;
- tpc->RxDescArray = (struct RxDesc *) (tpc->RxDescArrays + diff);
-
- if (tpc->TxDescArrays == NULL || tpc->RxDescArrays == NULL) {
- puts("Allocate RxDescArray or TxDescArray failed\n");
- return;
- }
+ tpc->RxDescArray = (struct RxDesc *) ((unsigned long)(tpc->RxDescArrays +
+ 255) & ~255);
rtl8169_init_ring(dev);
rtl8169_hw_start(dev);
/* Get MAC address. FIXME: read EEPROM */
for (i = 0; i < MAC_ADDR_LEN; i++)
- dev->enetaddr[i] = RTL_R8(MAC0 + i);
+ bis->bi_enetaddr[i] = dev->enetaddr[i] = RTL_R8(MAC0 + i);
#ifdef DEBUG_RTL8169
printf("MAC Address");
/* wait for auto-negotiation process */
for (i = 10000; i > 0; i--) {
/* check if auto-negotiation complete */
- if (mdio_read(PHY_STAT_REG) & PHY_Auto_Neco_Comp) {
+ if (mdio_read(PHY_STAT_REG) & PHY_Auto_Nego_Comp) {
udelay(100);
option = RTL_R8(PHYstatus);
if (option & _1000bpsF) {
#endif
} else {
#ifdef DEBUG_RTL8169
- printf
- ("%s: %sMbps %s-duplex operation.\n",
- dev->name,
- (option & _100bps) ? "100" :
- "10",
- (option & FullDup) ? "Full" :
- "Half");
+ printf("%s: %sMbps %s-duplex operation.\n",
+ dev->name,
+ (option & _100bps) ? "100" :
+ "10",
+ (option & FullDup) ? "Full" :
+ "Half");
#endif
}
break;
sprintf (dev->name, "RTL8169#%d", card_number);
dev->priv = (void *) devno;
- dev->iobase = (int)bus_to_phys(iobase);
+ dev->iobase = (int)pci_mem_to_phys(devno, iobase);
dev->init = rtl_reset;
dev->halt = rtl_halt;
return MIIM_CIS8204_EPHYCON_INIT;
}
+uint mii_m88e1111s_setmode(uint mii_reg, struct tsec_private *priv)
+{
+ uint mii_data = read_phy_reg(priv, mii_reg);
+
+ if (priv->flags & TSEC_REDUCED)
+ mii_data = (mii_data & 0xfff0) | 0x000b;
+ return mii_data;
+}
+
/* Initialized required registers to appropriate values, zeroing
* those we don't care about (unless zero is bad, in which case,
* choose a more appropriate value)
(struct phy_cmd[]){ /* config */
/* Reset and configure the PHY */
{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {0x1b, 0x848f, &mii_m88e1111s_setmode},
{0x14, 0x0cd2, NULL}, /* Delay RGMII TX and RX */
{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
};
#endif
+#ifdef CONFIG_UEC_ETH3
+static uec_info_t eth3_uec_info = {
+ .uf_info = {
+ .ucc_num = CFG_UEC3_UCC_NUM,
+ .rx_clock = CFG_UEC3_RX_CLK,
+ .tx_clock = CFG_UEC3_TX_CLK,
+ .eth_type = CFG_UEC3_ETH_TYPE,
+ },
+ .num_threads_tx = UEC_NUM_OF_THREADS_4,
+ .num_threads_rx = UEC_NUM_OF_THREADS_4,
+ .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+ .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+ .tx_bd_ring_len = 16,
+ .rx_bd_ring_len = 16,
+ .phy_address = CFG_UEC3_PHY_ADDR,
+ .enet_interface = CFG_UEC3_INTERFACE_MODE,
+};
+#endif
+
static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
{
uec_t *uec_regs;
} else if (index == 1) {
#ifdef CONFIG_UEC_ETH2
uec_info = ð2_uec_info;
+#endif
+ } else if (index == 2) {
+#ifdef CONFIG_UEC_ETH3
+ uec_info = ð3_uec_info;
#endif
} else {
printf("%s: index is illegal.\n", __FUNCTION__);
COBJS-y += pcf8563.o
COBJS-y += s3c24x0_rtc.o
COBJS-y += rs5c372.o
+COBJS-y += rx8025.o
COBJS-y += mcfrtc.o
COBJS-y += x1205.o
--- /dev/null
+/*
+ * (C) Copyright 2007
+ * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Epson RX8025 RTC driver.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+#include <i2c.h>
+
+#if defined(CONFIG_RTC_RX8025) && defined(CONFIG_CMD_DATE)
+
+/*---------------------------------------------------------------------*/
+#undef DEBUG_RTC
+
+#ifdef DEBUG_RTC
+#define DEBUGR(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGR(fmt,args...)
+#endif
+/*---------------------------------------------------------------------*/
+
+#ifndef CFG_I2C_RTC_ADDR
+# define CFG_I2C_RTC_ADDR 0x32
+#endif
+
+/*
+ * RTC register addresses
+ */
+#define RTC_SEC_REG_ADDR 0x00
+#define RTC_MIN_REG_ADDR 0x01
+#define RTC_HR_REG_ADDR 0x02
+#define RTC_DAY_REG_ADDR 0x03
+#define RTC_DATE_REG_ADDR 0x04
+#define RTC_MON_REG_ADDR 0x05
+#define RTC_YR_REG_ADDR 0x06
+
+#define RTC_CTL1_REG_ADDR 0x0e
+#define RTC_CTL2_REG_ADDR 0x0f
+
+/*
+ * Control register 1 bits
+ */
+#define RTC_CTL1_BIT_2412 0x20
+
+/*
+ * Control register 2 bits
+ */
+#define RTC_CTL2_BIT_PON 0x10
+#define RTC_CTL2_BIT_VDET 0x40
+#define RTC_CTL2_BIT_XST 0x20
+#define RTC_CTL2_BIT_VDSL 0x80
+
+/*
+ * Note: the RX8025 I2C RTC requires register
+ * reads and write to consist of a single bus
+ * cycle. It is not allowed to write the register
+ * address in a first cycle that is terminated by
+ * a STOP condition. The chips needs a 'restart'
+ * sequence (start sequence without a prior stop).
+ * This driver has been written for a 4xx board.
+ * U-Boot's 4xx i2c driver is currently not capable
+ * to generate such cycles to some work arounds
+ * are used.
+ */
+
+/* static uchar rtc_read (uchar reg); */
+#define rtc_read(reg) buf[((reg) + 1) & 0xf]
+
+static void rtc_write (uchar reg, uchar val);
+static uchar bin2bcd (unsigned int n);
+static unsigned bcd2bin (uchar c);
+
+/*
+ * Get the current time from the RTC
+ */
+void rtc_get (struct rtc_time *tmp)
+{
+ uchar sec, min, hour, mday, wday, mon, year, ctl2;
+ uchar buf[16];
+
+ if (i2c_read(CFG_I2C_RTC_ADDR, 0, 0, buf, 16))
+ printf("Error reading from RTC\n");
+
+ sec = rtc_read(RTC_SEC_REG_ADDR);
+ min = rtc_read(RTC_MIN_REG_ADDR);
+ hour = rtc_read(RTC_HR_REG_ADDR);
+ wday = rtc_read(RTC_DAY_REG_ADDR);
+ mday = rtc_read(RTC_DATE_REG_ADDR);
+ mon = rtc_read(RTC_MON_REG_ADDR);
+ year = rtc_read(RTC_YR_REG_ADDR);
+
+ DEBUGR ("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
+ "hr: %02x min: %02x sec: %02x\n",
+ year, mon, mday, wday, hour, min, sec);
+
+ /* dump status */
+ ctl2 = rtc_read(RTC_CTL2_REG_ADDR);
+ if (ctl2 & RTC_CTL2_BIT_PON)
+ printf("RTC: power-on detected\n");
+
+ if (ctl2 & RTC_CTL2_BIT_VDET)
+ printf("RTC: voltage drop detected\n");
+
+ if (!(ctl2 & RTC_CTL2_BIT_XST))
+ printf("RTC: oscillator stop detected\n");
+
+ tmp->tm_sec = bcd2bin (sec & 0x7F);
+ tmp->tm_min = bcd2bin (min & 0x7F);
+ tmp->tm_hour = bcd2bin (hour & 0x3F);
+ tmp->tm_mday = bcd2bin (mday & 0x3F);
+ tmp->tm_mon = bcd2bin (mon & 0x1F);
+ tmp->tm_year = bcd2bin (year) + ( bcd2bin (year) >= 70 ? 1900 : 2000);
+ tmp->tm_wday = bcd2bin (wday & 0x07);
+ tmp->tm_yday = 0;
+ tmp->tm_isdst= 0;
+
+ DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+}
+
+
+/*
+ * Set the RTC
+ */
+void rtc_set (struct rtc_time *tmp)
+{
+ DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ if (tmp->tm_year < 1970 || tmp->tm_year > 2069)
+ printf("WARNING: year should be between 1970 and 2069!\n");
+
+ rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100));
+ rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon));
+ rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday));
+ rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday));
+ rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
+ rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
+ rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
+
+ rtc_write (RTC_CTL1_REG_ADDR, RTC_CTL1_BIT_2412);
+}
+
+
+/*
+ * Reset the RTC. We setting the date back to 1970-01-01.
+ */
+void rtc_reset (void)
+{
+ struct rtc_time tmp;
+ uchar buf[16];
+ uchar ctl2;
+
+ if (i2c_read(CFG_I2C_RTC_ADDR, 0, 0, buf, 16))
+ printf("Error reading from RTC\n");
+
+ ctl2 = rtc_read(RTC_CTL2_REG_ADDR);
+ ctl2 &= ~(RTC_CTL2_BIT_PON | RTC_CTL2_BIT_VDET);
+ ctl2 |= RTC_CTL2_BIT_XST | RTC_CTL2_BIT_VDSL;
+ rtc_write (RTC_CTL2_REG_ADDR, ctl2);
+
+ tmp.tm_year = 1970;
+ tmp.tm_mon = 1;
+ tmp.tm_mday= 1;
+ tmp.tm_hour = 0;
+ tmp.tm_min = 0;
+ tmp.tm_sec = 0;
+
+ rtc_set(&tmp);
+
+ printf ( "RTC: %4d-%02d-%02d %2d:%02d:%02d UTC\n",
+ tmp.tm_year, tmp.tm_mon, tmp.tm_mday,
+ tmp.tm_hour, tmp.tm_min, tmp.tm_sec);
+
+ return;
+}
+
+
+/*
+ * Helper functions
+ */
+static void rtc_write (uchar reg, uchar val)
+{
+ uchar buf[2];
+ buf[0] = reg << 4;
+ buf[1] = val;
+ if (i2c_write(CFG_I2C_RTC_ADDR, 0, 0, buf, 2) != 0)
+ printf("Error writing to RTC\n");
+
+}
+
+static unsigned bcd2bin (uchar n)
+{
+ return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F));
+}
+
+static unsigned char bin2bcd (unsigned int n)
+{
+ return (((n / 10) << 4) | (n % 10));
+}
+
+#endif /* CONFIG_RTC_RX8025 && (CFG_COMMANDS & CFG_CMD_DATE) */
#include <common.h>
#include <malloc.h>
-#if defined(CONFIG_CMD_JFFS2)
+#if defined(CONFIG_CMD_CRAMFS)
#include <asm/byteorder.h>
#include <linux/stat.h>
return (-1);
}
} else {
- memset (buf, blocksize - skipfirst, 0);
+ memset (buf, 0, blocksize - skipfirst);
}
buf += blocksize - skipfirst;
}
+/autoconf.mk*
/asm
/asm-ppc/arch
/bmp_logo.h
void muxSetupSDRC(void);
void muxSetupGPMC(void);
void muxSetupUsb0(void);
+void muxSetupUsbHost(void);
void muxSetupUart3(void);
void muxSetupI2C1(void);
void muxSetupUART1(void);
#define CONTROL_PADCONF_GPMC_NCS0_BYTE1 ((volatile unsigned char *)0x4800008D)
#define CONTROL_PADCONF_GPMC_NCS0_BYTE2 ((volatile unsigned char *)0x4800008E)
#define CONTROL_PADCONF_GPMC_NCS0_BYTE3 ((volatile unsigned char *)0x4800008F)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE4 (0x48000090)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE5 (0x48000091)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE6 (0x48000092)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE7 (0x48000093)
/* Pin Muxing registers used for SDRC */
#define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0)
#define CONTROL_PADCONF_SPI1_SIMO ((volatile unsigned char *)0x48000100)
#define CONTROL_PADCONF_SPI1_SOMI ((volatile unsigned char *)0x48000101)
#define CONTROL_PADCONF_SPI1_NCS0 ((volatile unsigned char *)0x48000102)
+#define CONTROL_PADCONF_SPI1_NCS1 (0x48000103)
#define CONTROL_PADCONF_MCBSP1_FSR ((volatile unsigned char *)0x4800010B)
#define CONTROL_PADCONF_USB0_SE0 ((volatile uint8 *)0x48000122)
#define CONTROL_PADCONF_USB0_DAT ((volatile uint8 *)0x48000123)
+/* Pin Muxing registres used for USB1. */
+#define CONTROL_PADCONF_USB1_RCV (0x480000EB)
+#define CONTROL_PADCONF_USB1_TXEN (0x480000EC)
+
/* Pin Muxing registers used for UART3/IRDA */
#define CONTROL_PADCONF_UART3_TX_IRTX ((volatile uint8 *)0x48000118)
#define CONTROL_PADCONF_UART3_RX_IRRX ((volatile uint8 *)0x48000119)
+/* Pin Muxing registers used for GPIO */
+#define CONTROL_PADCONF_GPIO69 (0x480000ED)
+#define CONTROL_PADCONF_GPIO70 (0x480000EE)
+#define CONTROL_PADCONF_GPIO102 (0x48000116)
+#define CONTROL_PADCONF_GPIO103 (0x48000117)
+#define CONTROL_PADCONF_GPIO104 (0x48000118)
+#define CONTROL_PADCONF_GPIO105 (0x48000119)
+
#endif
#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0)
#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4)
#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8)
+#define GPMC_CONFIG1_2 (OMAP2420_GPMC_BASE+0xC0)
+#define GPMC_CONFIG2_2 (OMAP2420_GPMC_BASE+0xC4)
+#define GPMC_CONFIG3_2 (OMAP2420_GPMC_BASE+0xC8)
+#define GPMC_CONFIG4_2 (OMAP2420_GPMC_BASE+0xCC)
+#define GPMC_CONFIG5_2 (OMAP2420_GPMC_BASE+0xD0)
+#define GPMC_CONFIG6_2 (OMAP2420_GPMC_BASE+0xD4)
+#define GPMC_CONFIG7_2 (OMAP2420_GPMC_BASE+0xD8)
+#define GPMC_CONFIG1_3 (OMAP2420_GPMC_BASE+0xF0)
+#define GPMC_CONFIG2_3 (OMAP2420_GPMC_BASE+0xF4)
+#define GPMC_CONFIG3_3 (OMAP2420_GPMC_BASE+0xF8)
+#define GPMC_CONFIG4_3 (OMAP2420_GPMC_BASE+0xFC)
+#define GPMC_CONFIG5_3 (OMAP2420_GPMC_BASE+0x100)
+#define GPMC_CONFIG6_3 (OMAP2420_GPMC_BASE+0x104)
+#define GPMC_CONFIG7_3 (OMAP2420_GPMC_BASE+0x108)
/* SMS */
#define OMAP2420_SMS_BASE 0x68008000
#define SRAM_OFFSET2 0x0000F800
#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)
-#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
-
-#define PERIFERAL_PORT_BASE 0x480FE003
-
/* FPGA on Debug board.*/
#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b)
#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c)
#endif /* endif CONFIG_2420H4 */
+#if defined(CONFIG_APOLLON)
+#define APOLLON_CS0_BASE 0x00000000 /* OneNAND */
+#define APOLLON_CS1_BASE 0x08000000 /* ethernet */
+#define APOLLON_CS2_BASE 0x10000000 /* OneNAND */
+#define APOLLON_CS3_BASE 0x18000000 /* NOR */
+
+#define ETH_CONTROL_REG (APOLLON_CS1_BASE + 0x30b)
+#define LAN_RESET_REGISTER (APOLLON_CS1_BASE + 0x1c)
+#endif /* endif CONFIG_APOLLON */
+
+/* Common */
+#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
+
+#define PERIFERAL_PORT_BASE 0x480FE003
+
#endif
#define MACH_TYPE_CB3RUFC 726
#define MACH_TYPE_MP2USB 727
#define MACH_TYPE_AT91SAM9261EK 848
+#define MACH_TYPE_OMAP_APOLLON 919
#define MACH_TYPE_PDNB3 1002
#define MACH_TYPE_AT91SAM9260EK 1099
#define MACH_TYPE_AT91RM9200DF 1119
# define machine_is_omap_h4() (0)
#endif
+#ifdef CONFIG_MACH_OMAP_APOLLON
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_OMAP_APOLLON
+# endif
+# define machine_is_omap_apollon() (machine_arch_type == MACH_TYPE_OMAP_APOLLON)
+#else
+# define machine_is_omap_apollon() (0)
+#endif
+
#ifdef CONFIG_MACH_N10
# ifdef machine_arch_type
# undef machine_arch_type
#if defined(CONFIG_MPC83XX)
/* There are other clocks in the MPC83XX */
u32 csb_clk;
-#if defined (CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
#if defined (CONFIG_MPC834X)
u32 usbmph_clk;
#endif /* CONFIG_MPC834X */
+#if defined(CONFIG_MPC815)
+ u32 tdm_clk;
+#endif
+#if defined(CONFIG_MPC837X)
+ u32 sdhc_clk;
+#endif
u32 core_clk;
u32 i2c1_clk;
u32 i2c2_clk;
u32 lclk_clk;
u32 ddr_clk;
u32 pci_clk;
+#if defined(CONFIG_MPC837X)
+ u32 pciexp1_clk;
+ u32 pciexp2_clk;
+#endif
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+ u32 sata_clk;
+#endif
#if defined(CONFIG_MPC8360)
u32 ddr_sec_clk;
#endif /* CONFIG_MPC8360 */
void gpio_config(int pin, int in_out, int gpio_alt, int out_val);
void gpio_write_bit(int pin, int val);
int gpio_read_out_bit(int pin);
+int gpio_read_in_bit(int pin);
void gpio_set_chip_configuration(void);
#endif /* __ASM_PPC_GPIO_H */
/*
- * (C) Copyright 2004-2006 Freescale Semiconductor, Inc.
+ * (C) Copyright 2004-2007 Freescale Semiconductor, Inc.
*
* MPC83xx Internal Memory Map
*
u8 res6[0x0C];
u32 ddrcdr; /* DDR Control Driver Register */
u32 ddrdsr; /* DDR Debug Status Register */
- u8 res7[0xD0];
+ u32 obir; /* Output Buffer Impedance Register */
+ u8 res7[0xCC];
} sysconf83xx_t;
/*
u8 fixme[0x10000];
} security83xx_t;
+/*
+ * PCI Express
+ */
+typedef struct pex83xx {
+ u8 fixme[0x1000];
+} pex83xx_t;
+
+/*
+ * SATA
+ */
+typedef struct sata83xx {
+ u8 fixme[0x1000];
+} sata83xx_t;
+
+/*
+ * eSDHC
+ */
+typedef struct sdhc83xx {
+ u8 fixme[0x1000];
+} sdhc83xx_t;
+
+/*
+ * SerDes
+ */
+typedef struct serdes83xx {
+ u8 fixme[0x100];
+} serdes83xx_t;
+
+/*
+ * On Chip ROM
+ */
+typedef struct rom83xx {
+ u8 mem[0x10000];
+} rom83xx_t;
+
+/*
+ * TDM
+ */
+typedef struct tdm83xx {
+ u8 fixme[0x200];
+} tdm83xx_t;
+
+/*
+ * TDM DMAC
+ */
+typedef struct tdmdmac83xx {
+ u8 fixme[0x2000];
+} tdmdmac83xx_t;
+
#if defined(CONFIG_MPC834X)
typedef struct immap {
sysconf83xx_t sysconf; /* System configuration */
u8 res7[0xC0000];
} immap_t;
-#elif defined(CONFIG_MPC831X)
+#elif defined(CONFIG_MPC8313)
typedef struct immap {
sysconf83xx_t sysconf; /* System configuration */
wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
u8 res7[0xC0000];
} immap_t;
+#elif defined(CONFIG_MPC8315)
+typedef struct immap {
+ sysconf83xx_t sysconf; /* System configuration */
+ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
+ rtclk83xx_t pit; /* Periodic Interval Timer */
+ gtm83xx_t gtm[2]; /* Global Timers Module */
+ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter83xx_t arbiter; /* System Arbiter Registers */
+ reset83xx_t reset; /* Reset Module */
+ clk83xx_t clk; /* System Clock Module */
+ pmc83xx_t pmc; /* Power Management Control Module */
+ gpio83xx_t gpio[1]; /* General purpose I/O module */
+ u8 res0[0x1300];
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+ fsl_i2c_t i2c[2]; /* I2C Controllers */
+ u8 res1[0x1300];
+ duart83xx_t duart[2]; /* DUART */
+ u8 res2[0x900];
+ lbus83xx_t lbus; /* Local Bus Controller Registers */
+ u8 res3[0x1000];
+ spi83xx_t spi; /* Serial Peripheral Interface */
+ dma83xx_t dma; /* DMA */
+ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
+ u8 res4[0x80];
+ ios83xx_t ios; /* Sequencer */
+ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
+ u8 res5[0xa00];
+ pex83xx_t pciexp[2]; /* PCI Express Controller */
+ u8 res6[0xb000];
+ tdm83xx_t tdm; /* TDM Controller */
+ u8 res7[0x1e00];
+ sata83xx_t sata[2]; /* SATA Controller */
+ u8 res8[0x9000];
+ usb83xx_t usb[1]; /* USB DR Controller */
+ tsec83xx_t tsec[2];
+ u8 res9[0x6000];
+ tdmdmac83xx_t tdmdmac; /* TDM DMAC */
+ u8 res10[0x2000];
+ security83xx_t security;
+ u8 res11[0xA3000];
+ serdes83xx_t serdes[1]; /* SerDes Registers */
+ u8 res12[0x1CF00];
+} immap_t;
+
+#elif defined(CONFIG_MPC837X)
+typedef struct immap {
+ sysconf83xx_t sysconf; /* System configuration */
+ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
+ rtclk83xx_t pit; /* Periodic Interval Timer */
+ gtm83xx_t gtm[2]; /* Global Timers Module */
+ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter83xx_t arbiter; /* System Arbiter Registers */
+ reset83xx_t reset; /* Reset Module */
+ clk83xx_t clk; /* System Clock Module */
+ pmc83xx_t pmc; /* Power Management Control Module */
+ gpio83xx_t gpio[2]; /* General purpose I/O module */
+ u8 res0[0x1200];
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+ fsl_i2c_t i2c[2]; /* I2C Controllers */
+ u8 res1[0x1300];
+ duart83xx_t duart[2]; /* DUART */
+ u8 res2[0x900];
+ lbus83xx_t lbus; /* Local Bus Controller Registers */
+ u8 res3[0x1000];
+ spi83xx_t spi; /* Serial Peripheral Interface */
+ dma83xx_t dma; /* DMA */
+ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
+ u8 res4[0x80];
+ ios83xx_t ios; /* Sequencer */
+ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
+ u8 res5[0xa00];
+ pex83xx_t pciexp[2]; /* PCI Express Controller */
+ u8 res6[0xd000];
+ sata83xx_t sata[4]; /* SATA Controller */
+ u8 res7[0x7000];
+ usb83xx_t usb[1]; /* USB DR Controller */
+ tsec83xx_t tsec[2];
+ u8 res8[0x8000];
+ sdhc83xx_t sdhc; /* SDHC Controller */
+ u8 res9[0x1000];
+ security83xx_t security;
+ u8 res10[0xA3000];
+ serdes83xx_t serdes[2]; /* SerDes Registers */
+ u8 res11[0xCE00];
+ rom83xx_t rom; /* On Chip ROM */
+} immap_t;
+
#elif defined(CONFIG_MPC8360)
typedef struct immap {
sysconf83xx_t sysconf; /* System configuration */
--- /dev/null
+/*
+* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+/*
+ * Interrupt vector number definitions to ease the
+ * 405 -- 440 porting pain ;-)
+ *
+ * NOTE: They're not all here yet ... update as needed.
+ *
+ */
+
+#ifndef _VECNUMS_H_
+#define _VECNUMS_H_
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+/* UIC 0 */
+#define VECNUM_U0 0 /* UART 0 */
+#define VECNUM_U1 1 /* UART 1 */
+#define VECNUM_IIC0 2 /* IIC */
+#define VECNUM_KRD 3 /* Kasumi Ready for data */
+#define VECNUM_KDA 4 /* Kasumi Data Available */
+#define VECNUM_PCRW 5 /* PCI command register write */
+#define VECNUM_PPM 6 /* PCI power management */
+#define VECNUM_IIC1 7 /* IIC */
+#define VECNUM_SPI 8 /* SPI */
+#define VECNUM_EPCISER 9 /* External PCI SERR */
+#define VECNUM_MTE 10 /* MAL TXEOB */
+#define VECNUM_MRE 11 /* MAL RXEOB */
+#define VECNUM_D0 12 /* DMA channel 0 */
+#define VECNUM_D1 13 /* DMA channel 1 */
+#define VECNUM_D2 14 /* DMA channel 2 */
+#define VECNUM_D3 15 /* DMA channel 3 */
+#define VECNUM_UD0 16 /* UDMA irq 0 */
+#define VECNUM_UD1 17 /* UDMA irq 1 */
+#define VECNUM_UD2 18 /* UDMA irq 2 */
+#define VECNUM_UD3 19 /* UDMA irq 3 */
+#define VECNUM_HSB2D 20 /* USB2.0 Device */
+#define VECNUM_USBDEV 20 /* USB 1.1/USB 2.0 Device */
+#define VECNUM_OHCI1 21 /* USB2.0 Host OHCI irq 1 */
+#define VECNUM_OHCI2 22 /* USB2.0 Host OHCI irq 2 */
+#define VECNUM_EIP94 23 /* Security EIP94 */
+#define VECNUM_ETH0 24 /* Emac 0 */
+#define VECNUM_ETH1 25 /* Emac 1 */
+#define VECNUM_EHCI 26 /* USB2.0 Host EHCI */
+#define VECNUM_EIR4 27 /* External interrupt 4 */
+#define VECNUM_UIC2NC 28 /* UIC2 non-critical interrupt */
+#define VECNUM_UIC2C 29 /* UIC2 critical interrupt */
+#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
+#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
+
+/* UIC 1 */
+#define VECNUM_MS (32 + 0) /* MAL SERR */
+#define VECNUM_MTDE (32 + 1) /* MAL TXDE */
+#define VECNUM_MRDE (32 + 2) /* MAL RXDE */
+#define VECNUM_U2 (32 + 3) /* UART 2 */
+#define VECNUM_U3 (32 + 4) /* UART 3 */
+#define VECNUM_EBCO (32 + 5) /* EBCO interrupt status */
+#define VECNUM_NDFC (32 + 6) /* NDFC */
+#define VECNUM_KSLE (32 + 7) /* KASUMI slave error */
+#define VECNUM_CT5 (32 + 8) /* GPT compare timer 5 */
+#define VECNUM_CT6 (32 + 9) /* GPT compare timer 6 */
+#define VECNUM_PLB34I0 (32 + 10) /* PLB3X4X MIRQ0 */
+#define VECNUM_PLB34I1 (32 + 11) /* PLB3X4X MIRQ1 */
+#define VECNUM_PLB34I2 (32 + 12) /* PLB3X4X MIRQ2 */
+#define VECNUM_PLB34I3 (32 + 13) /* PLB3X4X MIRQ3 */
+#define VECNUM_PLB34I4 (32 + 14) /* PLB3X4X MIRQ4 */
+#define VECNUM_PLB34I5 (32 + 15) /* PLB3X4X MIRQ5 */
+#define VECNUM_CT0 (32 + 16) /* GPT compare timer 0 */
+#define VECNUM_CT1 (32 + 17) /* GPT compare timer 1 */
+#define VECNUM_EIR7 (32 + 18) /* External interrupt 7 */
+#define VECNUM_EIR8 (32 + 19) /* External interrupt 8 */
+#define VECNUM_EIR9 (32 + 20) /* External interrupt 9 */
+#define VECNUM_CT2 (32 + 21) /* GPT compare timer 2 */
+#define VECNUM_CT3 (32 + 22) /* GPT compare timer 3 */
+#define VECNUM_CT4 (32 + 23) /* GPT compare timer 4 */
+#define VECNUM_SRE (32 + 24) /* Serial ROM error */
+#define VECNUM_GPTDC (32 + 25) /* GPT decrementer pulse */
+#define VECNUM_RSVD0 (32 + 26) /* Reserved */
+#define VECNUM_EPCIPER (32 + 27) /* External PCI PERR */
+#define VECNUM_EIR0 (32 + 28) /* External interrupt 0 */
+#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */
+#define VECNUM_EIR1 (32 + 30) /* External interrupt 1 */
+#define VECNUM_EWU1 (32 + 31) /* Ethernet 1 wakeup */
+
+#define VECNUM_TXDE VECNUM_MTDE
+#define VECNUM_RXDE VECNUM_MRDE
+
+/* UIC 2 */
+#define VECNUM_EIR5 (64 + 0) /* External interrupt 5 */
+#define VECNUM_EIR6 (64 + 1) /* External interrupt 6 */
+#define VECNUM_OPB (64 + 2) /* OPB to PLB bridge int stat */
+#define VECNUM_EIR2 (64 + 3) /* External interrupt 2 */
+#define VECNUM_EIR3 (64 + 4) /* External interrupt 3 */
+#define VECNUM_DDR2 (64 + 5) /* DDR2 sdram */
+#define VECNUM_MCTX0 (64 + 6) /* MAl intp coalescence TX0 */
+#define VECNUM_MCTX1 (64 + 7) /* MAl intp coalescence TX1 */
+#define VECNUM_MCTR0 (64 + 8) /* MAl intp coalescence TR0 */
+#define VECNUM_MCTR1 (64 + 9) /* MAl intp coalescence TR1 */
+
+#elif defined(CONFIG_440SPE)
+
+/* UIC 0 */
+#define VECNUM_U0 0 /* UART0 */
+#define VECNUM_U1 1 /* UART1 */
+#define VECNUM_IIC0 2 /* IIC0 */
+#define VECNUM_IIC1 3 /* IIC1 */
+#define VECNUM_PIM 4 /* PCI inbound message */
+#define VECNUM_PCRW 5 /* PCI command reg write */
+#define VECNUM_PPM 6 /* PCI power management */
+#define VECNUM_MSI0 7 /* PCI MSI level 0 */
+#define VECNUM_MSI1 8 /* PCI MSI level 0 */
+#define VECNUM_MSI2 9 /* PCI MSI level 0 */
+#define VECNUM_D0 12 /* DMA channel 0 */
+#define VECNUM_D1 13 /* DMA channel 1 */
+#define VECNUM_D2 14 /* DMA channel 2 */
+#define VECNUM_D3 15 /* DMA channel 3 */
+#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
+#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
+
+/* UIC 1 */
+#define VECNUM_MS (32 + 1 ) /* MAL SERR */
+#define VECNUM_TXDE (32 + 2 ) /* MAL TXDE */
+#define VECNUM_RXDE (32 + 3 ) /* MAL RXDE */
+#define VECNUM_MTE (32 + 6 ) /* MAL Tx EOB */
+#define VECNUM_MRE (32 + 7 ) /* MAL Rx EOB */
+#define VECNUM_CT0 (32 + 12 ) /* GPT compare timer 0 */
+#define VECNUM_CT1 (32 + 13 ) /* GPT compare timer 1 */
+#define VECNUM_CT2 (32 + 14 ) /* GPT compare timer 2 */
+#define VECNUM_CT3 (32 + 15 ) /* GPT compare timer 3 */
+#define VECNUM_CT4 (32 + 16 ) /* GPT compare timer 4 */
+#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */
+#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */
+
+/* UIC 2 */
+#define VECNUM_EIR5 (64 + 24) /* External interrupt 5 */
+#define VECNUM_EIR4 (64 + 25) /* External interrupt 4 */
+#define VECNUM_EIR3 (64 + 26) /* External interrupt 3 */
+#define VECNUM_EIR2 (64 + 27) /* External interrupt 2 */
+#define VECNUM_EIR1 (64 + 28) /* External interrupt 1 */
+#define VECNUM_EIR0 (64 + 29) /* External interrupt 0 */
+
+#elif defined(CONFIG_440SP)
+
+/* UIC 0 */
+#define VECNUM_U0 0 /* UART0 */
+#define VECNUM_U1 1 /* UART1 */
+#define VECNUM_IIC0 2 /* IIC0 */
+#define VECNUM_IIC1 3 /* IIC1 */
+#define VECNUM_PIM 4 /* PCI inbound message */
+#define VECNUM_PCRW 5 /* PCI command reg write */
+#define VECNUM_PPM 6 /* PCI power management */
+#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
+#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
+
+/* UIC 1 */
+#define VECNUM_EIR0 (32 + 0) /* External interrupt 0 */
+#define VECNUM_MS (32 + 1) /* MAL SERR */
+#define VECNUM_TXDE (32 + 2) /* MAL TXDE */
+#define VECNUM_RXDE (32 + 3) /* MAL RXDE */
+#define VECNUM_MTE (32 + 6) /* MAL Tx EOB */
+#define VECNUM_MRE (32 + 7) /* MAL Rx EOB */
+#define VECNUM_CT0 (32 + 12) /* GPT compare timer 0 */
+#define VECNUM_CT1 (32 + 13) /* GPT compare timer 1 */
+#define VECNUM_CT2 (32 + 14) /* GPT compare timer 2 */
+#define VECNUM_CT3 (32 + 15) /* GPT compare timer 3 */
+#define VECNUM_CT4 (32 + 16) /* GPT compare timer 4 */
+#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */
+#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */
+
+#elif defined(CONFIG_440)
+
+/* UIC 0 */
+#define VECNUM_U0 0 /* UART0 */
+#define VECNUM_U1 1 /* UART1 */
+#define VECNUM_IIC0 2 /* IIC0 */
+#define VECNUM_IIC1 3 /* IIC1 */
+#define VECNUM_PIM 4 /* PCI inbound message */
+#define VECNUM_PCRW 5 /* PCI command reg write */
+#define VECNUM_PPM 6 /* PCI power management */
+#define VECNUM_MSI0 7 /* PCI MSI level 0 */
+#define VECNUM_MSI1 8 /* PCI MSI level 0 */
+#define VECNUM_MSI2 9 /* PCI MSI level 0 */
+#define VECNUM_MTE 10 /* MAL TXEOB */
+#define VECNUM_MRE 11 /* MAL RXEOB */
+#define VECNUM_D0 12 /* DMA channel 0 */
+#define VECNUM_D1 13 /* DMA channel 1 */
+#define VECNUM_D2 14 /* DMA channel 2 */
+#define VECNUM_D3 15 /* DMA channel 3 */
+#define VECNUM_CT0 18 /* GPT compare timer 0 */
+#define VECNUM_CT1 19 /* GPT compare timer 1 */
+#define VECNUM_CT2 20 /* GPT compare timer 2 */
+#define VECNUM_CT3 21 /* GPT compare timer 3 */
+#define VECNUM_CT4 22 /* GPT compare timer 4 */
+#define VECNUM_EIR0 23 /* External interrupt 0 */
+#define VECNUM_EIR1 24 /* External interrupt 1 */
+#define VECNUM_EIR2 25 /* External interrupt 2 */
+#define VECNUM_EIR3 26 /* External interrupt 3 */
+#define VECNUM_EIR4 27 /* External interrupt 4 */
+#define VECNUM_EIR5 28 /* External interrupt 5 */
+#define VECNUM_EIR6 29 /* External interrupt 6 */
+#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
+#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
+
+/* UIC 1 */
+#define VECNUM_MS (32 + 0 ) /* MAL SERR */
+#define VECNUM_TXDE (32 + 1 ) /* MAL TXDE */
+#define VECNUM_RXDE (32 + 2 ) /* MAL RXDE */
+#define VECNUM_USBDEV (32 + 23) /* USB 1.1/USB 2.0 Device */
+#define VECNUM_ETH0 (32 + 28) /* Ethernet 0 interrupt status */
+#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */
+
+#else /* !defined(CONFIG_440) */
+
+#if defined(CONFIG_405EZ)
+#define VECNUM_D0 0 /* DMA channel 0 */
+#define VECNUM_D1 1 /* DMA channel 1 */
+#define VECNUM_D2 2 /* DMA channel 2 */
+#define VECNUM_D3 3 /* DMA channel 3 */
+#define VECNUM_1588 4 /* IEEE 1588 network synchronization */
+#define VECNUM_U0 5 /* UART0 */
+#define VECNUM_U1 6 /* UART1 */
+#define VECNUM_CAN0 7 /* CAN 0 */
+#define VECNUM_CAN1 8 /* CAN 1 */
+#define VECNUM_SPI 9 /* SPI */
+#define VECNUM_IIC0 10 /* I2C */
+#define VECNUM_CHT0 11 /* Chameleon timer high pri interrupt */
+#define VECNUM_CHT1 12 /* Chameleon timer high pri interrupt */
+#define VECNUM_USBH1 13 /* USB Host 1 */
+#define VECNUM_USBH2 14 /* USB Host 2 */
+#define VECNUM_USBDEV 15 /* USB Device */
+#define VECNUM_ETH0 16 /* 10/100 Ethernet interrupt status */
+#define VECNUM_EWU0 17 /* Ethernet wakeup sequence detected */
+
+#define VECNUM_MADMAL 18 /* Logical OR of following MadMAL int */
+#define VECNUM_MS 18 /* MAL_SERR_INT */
+#define VECNUM_TXDE 18 /* MAL_TXDE_INT */
+#define VECNUM_RXDE 18 /* MAL_RXDE_INT */
+
+#define VECNUM_MTE 19 /* MAL TXEOB */
+#define VECNUM_MTE1 20 /* MAL TXEOB1 */
+#define VECNUM_MRE 21 /* MAL RXEOB */
+#define VECNUM_NAND 22 /* NAND Flash controller */
+#define VECNUM_ADC 23 /* ADC */
+#define VECNUM_DAC 24 /* DAC */
+#define VECNUM_OPB2PLB 25 /* OPB to PLB bridge interrupt */
+#define VECNUM_RESERVED0 26 /* Reserved */
+#define VECNUM_EIR0 27 /* External interrupt 0 */
+#define VECNUM_EIR1 28 /* External interrupt 1 */
+#define VECNUM_EIR2 29 /* External interrupt 2 */
+#define VECNUM_EIR3 30 /* External interrupt 3 */
+#define VECNUM_EIR4 31 /* External interrupt 4 */
+
+#elif defined(CONFIG_405EX)
+
+/* UIC 0 */
+#define VECNUM_U0 00
+#define VECNUM_U1 01
+#define VECNUM_IIC0 02
+#define VECNUM_PKA 03
+#define VECNUM_TRNG 04
+#define VECNUM_EBM 05
+#define VECNUM_BGI 06
+#define VECNUM_IIC1 07
+#define VECNUM_SPI 08
+#define VECNUM_EIR0 09
+#define VECNUM_MTE 10 /* MAL Tx EOB */
+#define VECNUM_MRE 11 /* MAL Rx EOB */
+#define VECNUM_DMA0 12
+#define VECNUM_DMA1 13
+#define VECNUM_DMA2 14
+#define VECNUM_DMA3 15
+#define VECNUM_PCIE0AL 16
+#define VECNUM_PCIE0VPD 17
+#define VECNUM_RPCIE0HRST 18
+#define VECNUM_FPCIE0HRST 19
+#define VECNUM_PCIE0TCR 20
+#define VECNUM_PCIEMSI0 21
+#define VECNUM_PCIEMSI1 22
+#define VECNUM_SECURITY 23
+#define VECNUM_ETH0 24
+#define VECNUM_ETH1 25
+#define VECNUM_PCIEMSI2 26
+#define VECNUM_EIR4 27
+#define VECNUM_UIC2NC 28
+#define VECNUM_UIC2C 29
+#define VECNUM_UIC1NC 30
+#define VECNUM_UIC1C 31
+
+/* UIC 1 */
+#define VECNUM_MS (32 + 00) /* MAL SERR */
+#define VECNUM_TXDE (32 + 01) /* MAL TXDE */
+#define VECNUM_RXDE (32 + 02) /* MAL RXDE */
+#define VECNUM_PCIE0BMVC0 (32 + 03)
+#define VECNUM_PCIE0DCRERR (32 + 04)
+#define VECNUM_EBC (32 + 05)
+#define VECNUM_NDFC (32 + 06)
+#define VECNUM_PCEI1DCRERR (32 + 07)
+#define VECNUM_CT8 (32 + 08)
+#define VECNUM_CT9 (32 + 09)
+#define VECNUM_PCIE1AL (32 + 10)
+#define VECNUM_PCIE1VPD (32 + 11)
+#define VECNUM_RPCE1HRST (32 + 12)
+#define VECNUM_FPCE1HRST (32 + 13)
+#define VECNUM_PCIE1TCR (32 + 14)
+#define VECNUM_PCIE1VC0 (32 + 15)
+#define VECNUM_CT3 (32 + 16)
+#define VECNUM_CT4 (32 + 17)
+#define VECNUM_EIR7 (32 + 18)
+#define VECNUM_EIR8 (32 + 19)
+#define VECNUM_EIR9 (32 + 20)
+#define VECNUM_CT5 (32 + 21)
+#define VECNUM_CT6 (32 + 22)
+#define VECNUM_CT7 (32 + 23)
+#define VECNUM_SROM (32 + 24) /* SERIAL ROM */
+#define VECNUM_GPTDECPULS (32 + 25) /* GPT Decrement pulse */
+#define VECNUM_EIR2 (32 + 26)
+#define VECNUM_EIR5 (32 + 27)
+#define VECNUM_EIR6 (32 + 28)
+#define VECNUM_EMAC0WAKE (32 + 29)
+#define VECNUM_EIR1 (32 + 30)
+#define VECNUM_EMAC1WAKE (32 + 31)
+
+/* UIC 2 */
+#define VECNUM_PCIE0INTA (64 + 00) /* PCIE0 INTA */
+#define VECNUM_PCIE0INTB (64 + 01) /* PCIE0 INTB */
+#define VECNUM_PCIE0INTC (64 + 02) /* PCIE0 INTC */
+#define VECNUM_PCIE0INTD (64 + 03) /* PCIE0 INTD */
+#define VECNUM_EIR3 (64 + 04) /* External IRQ 3 */
+#define VECNUM_DDRMCUE (64 + 05)
+#define VECNUM_DDRMCCE (64 + 06)
+#define VECNUM_MALINTCOATX0 (64 + 07) /* Interrupt coalecence TX0 */
+#define VECNUM_MALINTCOATX1 (64 + 08) /* Interrupt coalecence TX1 */
+#define VECNUM_MALINTCOARX0 (64 + 09) /* Interrupt coalecence RX0 */
+#define VECNUM_MALINTCOARX1 (64 + 10) /* Interrupt coalecence RX1 */
+#define VECNUM_PCIE1INTA (64 + 11) /* PCIE0 INTA */
+#define VECNUM_PCIE1INTB (64 + 12) /* PCIE0 INTB */
+#define VECNUM_PCIE1INTC (64 + 13) /* PCIE0 INTC */
+#define VECNUM_PCIE1INTD (64 + 14) /* PCIE0 INTD */
+#define VECNUM_RPCIEMSI2 (64 + 15) /* MSI level 2 */
+#define VECNUM_PCIEMSI3 (64 + 16) /* MSI level 2 */
+#define VECNUM_PCIEMSI4 (64 + 17) /* MSI level 2 */
+#define VECNUM_PCIEMSI5 (64 + 18) /* MSI level 2 */
+#define VECNUM_PCIEMSI6 (64 + 19) /* MSI level 2 */
+#define VECNUM_PCIEMSI7 (64 + 20) /* MSI level 2 */
+#define VECNUM_PCIEMSI8 (64 + 21) /* MSI level 2 */
+#define VECNUM_PCIEMSI9 (64 + 22) /* MSI level 2 */
+#define VECNUM_PCIEMSI10 (64 + 23) /* MSI level 2 */
+#define VECNUM_PCIEMSI11 (64 + 24) /* MSI level 2 */
+#define VECNUM_PCIEMSI12 (64 + 25) /* MSI level 2 */
+#define VECNUM_PCIEMSI13 (64 + 26) /* MSI level 2 */
+#define VECNUM_PCIEMSI14 (64 + 27) /* MSI level 2 */
+#define VECNUM_PCIEMSI15 (64 + 28) /* MSI level 2 */
+#define VECNUM_PLB4XAHB (64 + 29) /* PLBxAHB bridge */
+#define VECNUM_USBWAKE (64 + 30) /* USB wakup */
+#define VECNUM_USBOTG (64 + 31) /* USB OTG */
+
+#else /* !CONFIG_405EZ */
+
+#define VECNUM_U0 0 /* UART0 */
+#define VECNUM_U1 1 /* UART1 */
+#define VECNUM_D0 5 /* DMA channel 0 */
+#define VECNUM_D1 6 /* DMA channel 1 */
+#define VECNUM_D2 7 /* DMA channel 2 */
+#define VECNUM_D3 8 /* DMA channel 3 */
+#define VECNUM_EWU0 9 /* Ethernet wakeup */
+#define VECNUM_MS 10 /* MAL SERR */
+#define VECNUM_MTE 11 /* MAL TXEOB */
+#define VECNUM_MRE 12 /* MAL RXEOB */
+#define VECNUM_TXDE 13 /* MAL TXDE */
+#define VECNUM_RXDE 14 /* MAL RXDE */
+#define VECNUM_ETH0 15 /* Ethernet interrupt status */
+#define VECNUM_EIR0 25 /* External interrupt 0 */
+#define VECNUM_EIR1 26 /* External interrupt 1 */
+#define VECNUM_EIR2 27 /* External interrupt 2 */
+#define VECNUM_EIR3 28 /* External interrupt 3 */
+#define VECNUM_EIR4 29 /* External interrupt 4 */
+#define VECNUM_EIR5 30 /* External interrupt 5 */
+#define VECNUM_EIR6 31 /* External interrupt 6 */
+#endif /* defined(CONFIG_405EZ) */
+
+#endif /* defined(CONFIG_440) */
+
+#endif /* _VECNUMS_H_ */
#define SVR_8544_E 0x803C
#define SVR_8548 0x8031
#define SVR_8548_E 0x8039
+#define SVR_8610 0x80A0
#define SVR_8641 0x8090
#define SVR_8568_E 0x807D
#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
#define CONFIG_CMD_SNTP /* SNTP support */
#define CONFIG_CMD_SPI /* SPI utility */
+#define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */
#define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */
#define CONFIG_CMD_USB /* USB Support */
#define CONFIG_CMD_VFD /* VFD support (TRAB) */
* Virtex2 FPGA configuration support
*/
#define CONFIG_FPGA_COUNT 1
-#define CONFIG_FPGA CFG_XILINX_VIRTEX2
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_VIRTEX2
#define CFG_FPGA_PROG_FEEDBACK
/* FPGA - Spartan 2 */
/* experiment
-#define CONFIG_FPGA CFG_SPARTAN3
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_SPARTAN3
#define CONFIG_FPGA_COUNT 1
#define CFG_FPGA_PROG_FEEDBACK
#define CFG_FPGA_CHECK_CTRLC
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8313@0"
-#define OF_SOC "soc8313@e0000000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc8313@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/*
* Serial Port
*/
#ifndef CFG_RAMBOOT
#define CFG_ENV_IS_IN_FLASH 1
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */
#define CFG_ENV_SIZE 0x2000
#undef CFG_RAMBOOT
#endif
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8323@0"
-#define OF_SOC "soc8323@e0000000"
-#define OF_QE "qe@e0100000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc8323@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
*/
#ifndef CFG_RAMBOOT
#define CFG_ENV_IS_IN_FLASH 1
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
- #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+ #define CFG_ENV_SECT_SIZE 0x20000
#define CFG_ENV_SIZE 0x2000
#else
#define CFG_NO_FLASH 1 /* Flash is not usable now */
#undef CFG_RAMBOOT
#endif
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8323@0"
-#define OF_SOC "soc8323@e0000000"
-#define OF_QE "qe@e0100000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc8323@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
*/
#ifndef CFG_RAMBOOT
#define CFG_ENV_IS_IN_FLASH 1
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
- #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+ #define CFG_ENV_SECT_SIZE 0x20000
#define CFG_ENV_SIZE 0x2000
#else
#define CFG_NO_FLASH 1 /* Flash is not usable now */
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8349@0"
-#define OF_SOC "soc8349@e0000000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
*/
#ifndef CFG_RAMBOOT
#define CFG_ENV_IS_IN_FLASH 1
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
#define CFG_ENV_SIZE 0x2000
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP
-
-#define OF_CPU "PowerPC,8349@0"
-#define OF_SOC "soc8349@e0000000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500"
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/*
* PCI
#ifndef CFG_RAMBOOT
#define CFG_ENV_IS_IN_FLASH
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE + (4 * CFG_ENV_SECT_SIZE))
#define CFG_ENV_SIZE 0x2000
#else
#define CFG_NO_FLASH /* Flash is not usable now */
#undef CFG_RAMBOOT
#endif
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
-#undef CONFIG_OF_FLAT_TREE
#define CONFIG_OF_BOARD_SETUP 1
-#define CONFIG_OF_HAS_BD_T 1
-#define CONFIG_OF_HAS_UBOOT_ENV 1
-
-#define OF_CPU "PowerPC,8360@0"
-#define OF_SOC "soc8360@e0000000"
-#define OF_QE "qe@e0100000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc8360@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
#ifndef CFG_RAMBOOT
#define CFG_ENV_IS_IN_FLASH 1
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
- #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+ #define CFG_ENV_SECT_SIZE 0x20000
#define CFG_ENV_SIZE 0x2000
#else
#define CFG_NO_FLASH 1 /* Flash is not usable now */
--- /dev/null
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1 /* E300 family */
+#define CONFIG_MPC83XX 1 /* MPC83XX family */
+#define CONFIG_MPC837X 1 /* MPC837X CPU specific */
+#define CONFIG_MPC837XEMDS 1 /* MPC837XEMDS board specific */
+
+/*
+ * System Clock Setup
+ */
+#ifdef CONFIG_PCISLAVE
+#define CONFIG_83XX_PCICLK 66000000 /* in HZ */
+#else
+#define CONFIG_83XX_CLKIN 66000000 /* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ 66000000
+#endif
+
+/*
+ * Hardware Reset Configuration Word
+ * if CLKIN is 66MHz, then
+ * CSB = 396MHz, CORE = 594MHz, DDRC = 396MHz, LBC = 396MHz
+ */
+#define CFG_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+ HRCWL_DDR_TO_SCB_CLK_1X1 |\
+ HRCWL_SVCOD_DIV_2 |\
+ HRCWL_CSB_TO_CLKIN_6X1 |\
+ HRCWL_CORE_TO_CSB_1_5X1)
+
+#ifdef CONFIG_PCISLAVE
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_AGENT |\
+ HRCWH_PCI1_ARBITER_DISABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0XFFF00100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_RL_EXT_LEGACY |\
+ HRCWH_TSEC1M_IN_RGMII |\
+ HRCWH_TSEC2M_IN_RGMII |\
+ HRCWH_BIG_ENDIAN |\
+ HRCWH_LDP_CLEAR)
+#else
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_RL_EXT_LEGACY |\
+ HRCWH_TSEC1M_IN_RGMII |\
+ HRCWH_TSEC2M_IN_RGMII |\
+ HRCWH_BIG_ENDIAN |\
+ HRCWH_LDP_CLEAR)
+#endif
+
+/*
+ * eTSEC Clock Config
+ */
+#define CFG_SCCR_TSEC1CM 1 /* CSB:eTSEC1 = 1:1 */
+#define CFG_SCCR_TSEC2CM 1 /* CSB:eTSEC2 = 1:1 */
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRH 0x00000000
+#define CFG_SICRL 0x00000000
+
+/*
+ * Output Buffer Impedance
+ */
+#define CFG_OBIR 0x31100000
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_R
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMR 0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+#define CFG_83XX_DDR_USES_CS0
+#define CFG_DDRCDR_VALUE 0x80080001 /* ODT 150ohm on SoC */
+
+#undef CONFIG_DDR_ECC /* support DDR ECC function */
+#undef CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */
+
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
+#define CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */
+
+#if defined(CONFIG_SPD_EEPROM)
+#define SPD_EEPROM_ADDRESS 0x51 /* I2C address of DDR SODIMM SPD */
+#else
+/*
+ * Manually set up DDR parameters
+ * WHITE ELECTRONIC DESGGNS - W3HG64M72EEU403PD4 SO-DIMM
+ * consist of nine chips from SAMSUNG K4T51083QE-ZC(L)D5
+ */
+#define CFG_DDR_SIZE 512 /* MB */
+#define CFG_DDR_CS0_BNDS 0x0000001f
+#define CFG_DDR_CS0_CONFIG ( CSCONFIG_EN \
+ | 0x00010000 /* ODT_WR to CSn */ \
+ | CSCONFIG_ROW_BIT_14 | CSCONFIG_COL_BIT_10 )
+ /* 0x80010202 */
+#define CFG_DDR_TIMING_3 0x00000000
+#define CFG_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
+ | ( 0 << TIMING_CFG0_WRT_SHIFT ) \
+ | ( 0 << TIMING_CFG0_RRT_SHIFT ) \
+ | ( 0 << TIMING_CFG0_WWT_SHIFT ) \
+ | ( 6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
+ | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
+ | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
+ | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
+ /* 0x00620802 */
+#define CFG_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
+ | ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
+ | ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
+ | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
+ | (13 << TIMING_CFG1_REFREC_SHIFT ) \
+ | ( 3 << TIMING_CFG1_WRREC_SHIFT ) \
+ | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
+ | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
+ /* 0x3935d322 */
+#define CFG_DDR_TIMING_2 ( ( 2 << TIMING_CFG2_ADD_LAT_SHIFT ) \
+ | ( 6 << TIMING_CFG2_CPO_SHIFT ) \
+ | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
+ | ( 4 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
+ | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
+ | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
+ | ( 8 << TIMING_CFG2_FOUR_ACT_SHIFT) )
+ /* 0x231088c8 */
+#define CFG_DDR_INTERVAL ( ( 0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT ) \
+ | ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
+ /* 0x03E00100 */
+#define CFG_DDR_SDRAM_CFG 0x43000000
+#define CFG_DDR_SDRAM_CFG2 0x00001000 /* 1 posted refresh */
+#define CFG_DDR_MODE ( ( 0x0450 << SDRAM_MODE_ESD_SHIFT ) \
+ | ( 0x1432 << SDRAM_MODE_SD_SHIFT ) )
+ /* ODT 150ohm CL=3, AL=2 on SDRAM */
+#define CFG_DDR_MODE2 0x00000000
+#endif
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00040000 /* memtest region */
+#define CFG_MEMTEST_END 0x00140000
+
+/*
+ * The reserved memory
+ */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_8)
+#define CFG_LBC_LBCR 0x00000000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI /* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
+#define CFG_FLASH_SIZE 32 /* max FLASH size is 32M */
+
+#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */
+
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \
+ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
+ BR_V) /* valid */
+#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
+ OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+ OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+/*
+ * BCSR on the Local Bus
+ */
+#define CFG_BCSR 0xF8000000
+#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */
+#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */
+
+#define CFG_BR1_PRELIM (CFG_BCSR | 0x00000801) /* Port size=8bit, MSEL=GPCM */
+#define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */
+
+/*
+ * NAND Flash on the Local Bus
+ */
+#define CFG_NAND_BASE 0xE0600000 /* 0xE0600000 */
+#define CFG_BR3_PRELIM ( CFG_NAND_BASE \
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8 bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V ) /* valid */
+#define CFG_OR3_PRELIM ( 0xFFFF8000 /* length 32K */ \
+ | OR_FCM_CSCT \
+ | OR_FCM_CST \
+ | OR_FCM_CHT \
+ | OR_FCM_SCY_1 \
+ | OR_FCM_TRLX \
+ | OR_FCM_EHTR )
+ /* 0xFFFF8396 */
+
+#define CFG_LBLAWBAR3_PRELIM CFG_NAND_BASE
+#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CFG_NS16550_COM1 (CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2 (CFG_IMMR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_FSL_I2C
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3000
+#define CFG_I2C2_OFFSET 0x3100
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
+#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI_MEM_BASE 0x80000000
+#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE
+#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI_MMIO_BASE 0x90000000
+#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE
+#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */
+#define CFG_PCI_IO_BASE 0xE0300000
+#define CFG_PCI_IO_PHYS 0xE0300000
+#define CFG_PCI_IO_SIZE 0x100000 /* 1M */
+
+#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE
+#define CFG_PCI_SLV_MEM_BUS 0x00000000
+#define CFG_PCI_SLV_MEM_SIZE 0x80000000
+
+#ifdef CONFIG_PCI
+#define CONFIG_83XX_GENERIC_PCI 1 /* Use generic PCI setup */
+#define CONFIG_PQ_MDS_PIB 1 /* PQ MDS Platform IO Board */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
+#endif /* CONFIG_PCI */
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+/*
+ * TSEC
+ */
+#define CONFIG_TSEC_ENET /* TSEC ethernet support */
+#define CFG_TSEC1_OFFSET 0x24000
+#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
+#define CFG_TSEC2_OFFSET 0x25000
+#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
+
+/*
+ * TSEC ethernet configuration
+ */
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "eTSEC1"
+#define TSEC1_PHY_ADDR 2
+#define TSEC2_PHY_ADDR 3
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME "eTSEC1"
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+ #define CFG_ENV_IS_IN_FLASH 1
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+ #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
+ #define CFG_ENV_SIZE 0x2000
+#else
+ #define CFG_NO_FLASH 1 /* Flash is not usable now */
+ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+ #define CFG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+
+#if defined(CONFIG_PCI)
+ #define CONFIG_CMD_PCI
+#endif
+
+#if defined(CFG_RAMBOOT)
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
+#endif
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if defined(CONFIG_CMD_KGDB)
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT 0x000000000
+#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2 HID2_HBE
+
+/*
+ * Cache Config
+ */
+#define CFG_DCACHE_SIZE 32768
+#define CFG_CACHELINE_SIZE 32
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */
+#endif
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_SDRAM_LOWER CFG_SDRAM_BASE
+#define CFG_SDRAM_UPPER (CFG_SDRAM_BASE + 0x10000000)
+
+#define CFG_IBAT0L (CFG_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+
+#define CFG_IBAT1L (CFG_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+
+/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
+#define CFG_IBAT2L (CFG_IMMR | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U (CFG_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+
+/* BCSR: cache-inhibit and guarded */
+#define CFG_IBAT3L (CFG_BCSR | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT3U (CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT4L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT4U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_DBAT4L (CFG_FLASH_BASE | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT4U CFG_IBAT4U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT5L CFG_IBAT5L
+#define CFG_DBAT5U CFG_IBAT5U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT6L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+#else
+#define CFG_IBAT6L (0)
+#define CFG_IBAT6U (0)
+#define CFG_IBAT7L (0)
+#define CFG_IBAT7U (0)
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#define CONFIG_ETHADDR 00:E0:0C:00:83:79
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:E0:0C:00:83:78
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=1000000\0" \
+ "ramdiskfile=ramfs.83xx\0" \
+ "fdtaddr=400000\0" \
+ "fdtfile=mpc837xemds.dtb\0" \
+ ""
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif /* __CONFIG_H */
--- /dev/null
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+/*
+ * MPC8610HPCD board configuration file
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_MPC86xx 1 /* MPC86xx */
+#define CONFIG_MPC8610 1 /* MPC8610 specific */
+#define CONFIG_MPC8610HPCD 1 /* MPC8610HPCD board specific */
+#define CONFIG_NUM_CPUS 1 /* Number of CPUs in the system */
+#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */
+
+#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */
+
+/* video */
+#define CONFIG_VIDEO
+
+#if defined(CONFIG_VIDEO)
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#endif
+
+#ifdef RUN_DIAG
+#define CFG_DIAG_ADDR 0xff800000
+#endif
+
+#define CFG_RESET_ADDRESS 0xfff00100
+
+#define CONFIG_PCI 1 /* Enable PCI/PCIE*/
+#define CONFIG_PCI1 1 /* PCI controler 1 */
+#define CONFIG_PCIE1 1 /* PCIe 1 connected to ULI bridge */
+#define CONFIG_PCIE2 1 /* PCIe 2 connected to slot */
+#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_SPD_EEPROM /* Use SPD for DDR */
+#undef CONFIG_DDR_DLL /* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
+
+#define CONFIG_ALTIVEC 1
+
+/*
+ * L2CR setup -- make sure this is right for your board!
+ */
+#define CFG_L2
+#define L2_INIT 0
+#define L2_ENABLE (L2CR_L2E |0x00100000 )
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0)
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#define CONFIG_MISC_INIT_R 1
+
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00200000 /* memtest region */
+#define CFG_MEMTEST_END 0x00400000
+#define CFG_ALT_MEMTEST
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
+#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
+
+#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
+#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000)
+#define CFG_PCIE2_ADDR (CFG_CCSRBAR+0x9000)
+
+#define CFG_DIU_ADDR (CFG_CCSRBAR+0x2c000)
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
+#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
+#define CONFIG_VERY_BIG_RAM
+
+#define MPC86xx_DDR_SDRAM_CLK_CNTL
+
+#if defined(CONFIG_SPD_EEPROM)
+/*
+ * Determine DDR configuration from I2C interface.
+ */
+#define SPD_EEPROM_ADDRESS1 0x51 /* DDR DIMM */
+#else
+/*
+ * Manually set up DDR1 parameters
+ */
+
+#define CFG_SDRAM_SIZE 256 /* DDR is 256MB */
+
+#if 0 /* TODO */
+#define CFG_DDR_CS0_BNDS 0x0000000F
+#define CFG_DDR_CS0_CONFIG 0x80010202 /* Enable, no interleaving */
+#define CFG_DDR_EXT_REFRESH 0x00000000
+#define CFG_DDR_TIMING_0 0x00260802
+#define CFG_DDR_TIMING_1 0x3935d322
+#define CFG_DDR_TIMING_2 0x14904cc8
+#define CFG_DDR_MODE_1 0x00480432
+#define CFG_DDR_MODE_2 0x00000000
+#define CFG_DDR_INTERVAL 0x06180100
+#define CFG_DDR_DATA_INIT 0xdeadbeef
+#define CFG_DDR_CLK_CTRL 0x03800000
+#define CFG_DDR_OCD_CTRL 0x00000000
+#define CFG_DDR_OCD_STATUS 0x00000000
+#define CFG_DDR_CONTROL 0xe3008000 /* Type = DDR2 */
+#define CFG_DDR_CONTROL2 0x04400010
+
+#define CFG_DDR_ERR_INT_EN 0x00000000
+#define CFG_DDR_ERR_DIS 0x00000000
+#define CFG_DDR_SBE 0x000f0000
+ /* Not used in fixed_sdram function */
+#define CFG_DDR_MODE 0x00000022
+#define CFG_DDR_CS1_BNDS 0x00000000
+#define CFG_DDR_CS2_BNDS 0x00000FFF /* Not done */
+#define CFG_DDR_CS3_BNDS 0x00000FFF /* Not done */
+#define CFG_DDR_CS4_BNDS 0x00000FFF /* Not done */
+#define CFG_DDR_CS5_BNDS 0x00000FFF /* Not done */
+#endif
+#endif
+
+#define CFG_ID_EEPROM
+#define ID_EEPROM_ADDR 0x57
+
+
+#define CFG_FLASH_BASE 0xf0000000 /* start of FLASH 128M */
+#define CFG_FLASH_BASE2 0xf8000000
+
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
+
+#define CFG_BR0_PRELIM 0xf8001001 /* port size 16bit */
+#define CFG_OR0_PRELIM 0xf8006e65 /* 128MB NOR Flash*/
+
+#define CFG_BR1_PRELIM 0xf0001001 /* port size 16bit */
+#define CFG_OR1_PRELIM 0xf8006e65 /* 128MB Promjet */
+#if 0 /* TODO */
+#define CFG_BR2_PRELIM 0xf0000000
+#define CFG_OR2_PRELIM 0xf0000000 /* 256MB NAND Flash - bank 1 */
+#endif
+#define CFG_BR3_PRELIM 0xe8000801 /* port size 8bit */
+#define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/
+
+
+#define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */
+#define PIXIS_BASE 0xe8000000 /* PIXIS registers */
+#define PIXIS_ID 0x0 /* Board ID at offset 0 */
+#define PIXIS_VER 0x1 /* Board version at offset 1 */
+#define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */
+#define PIXIS_RST 0x4 /* PIXIS Reset Control register */
+#define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch */
+#define PIXIS_SPD 0x7 /* Register for SYSCLK speed */
+#define PIXIS_BRDCFG0 0x8 /* PIXIS Board Configuration Register0*/
+#define PIXIS_VCTL 0x10 /* VELA Control Register */
+#define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */
+#define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */
+#define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */
+#define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */
+#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */
+#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */
+#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */
+#define CFG_PIXIS_VBOOT_MASK 0x0C /* Reset altbank mask*/
+
+#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
+#define CFG_MAX_FLASH_SECT 1024 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+#if defined(CFG_RAMBOOT)
+#undef CONFIG_SPD_EEPROM
+#define CFG_SDRAM_SIZE 256
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 1
+#ifndef CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
+#else
+#define CFG_INIT_RAM_ADDR 0xe4000000 /* Initial RAM address */
+#endif
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */
+#define CFG_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/*
+ * Pass open firmware flat tree to kernel
+ */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE 8192
+
+#define OF_CPU "PowerPC,8610@0"
+#define OF_SOC "soc@e0000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc@e0000000/serial@4500"
+
+#define CFG_64BIT_VSPRINTF 1
+#define CFG_64BIT_STRTOUL 1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C /* I2C with hardware support*/
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3000
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE 0x80000000
+#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xe1000000
+#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS 0x00000000
+#define CFG_PCI_MEMORY_PHYS 0x00000000
+#define CFG_PCI_MEMORY_SIZE 0x80000000
+
+/* For RTL8139 */
+#define KSEG1ADDR(x) ({u32 _x = le32_to_cpu(*(u32 *)(x)); (&_x); })
+#define _IO_BASE 0x00000000
+
+/* controller 1, Base address 0xa000 */
+#define CFG_PCIE1_MEM_BASE 0xa0000000
+#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCIE1_IO_BASE 0x00000000
+#define CFG_PCIE1_IO_PHYS 0xe3000000
+#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */
+
+/* controller 2, Base Address 0x9000 */
+#define CFG_PCIE2_MEM_BASE 0x90000000
+#define CFG_PCIE2_MEM_PHYS CFG_PCIE2_MEM_BASE
+#define CFG_PCIE2_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCIE2_IO_BASE 0x00000000 /* reuse mem LAW */
+#define CFG_PCIE2_IO_PHYS 0xe2000000
+#define CFG_PCIE2_IO_SIZE 0x00100000 /* 1M */
+
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_CMD_NET
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#define CONFIG_RTL8139
+#define CONFIG_SK98
+#define CONFIG_EEPRO100
+#define CONFIG_TULIP
+#ifdef CONFIG_TULIP
+#define CONFIG_ETHADDR 00:E0:0C:00:00:01
+#endif
+
+/************************************************************
+ * USB support
+ ************************************************************/
+#define CONFIG_PCI_OHCI 1
+#define CONFIG_USB_OHCI_NEW 1
+#define CONFIG_USB_KEYBOARD 1
+#define CFG_DEVICE_DEREGISTER
+#define CFG_USB_EVENT_POLL 1
+#define CFG_USB_OHCI_SLOT_NAME "ohci_pci"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+#define CFG_OHCI_SWAP_REG_ACCESS 1
+
+#if !defined(CONFIG_PCI_PNP)
+#define PCI_ENET0_IOADDR 0xe0000000
+#define PCI_ENET0_MEMADDR 0xe0000000
+#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+#endif
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SCSI_AHCI
+
+#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_SATA_ULI5288
+#define CFG_SCSI_MAX_SCSI_ID 4
+#define CFG_SCSI_MAX_LUN 1
+#define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
+#define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE
+#endif
+
+#endif /* CONFIG_PCI */
+
+/*
+ * BAT0 2G Cacheable, non-guarded
+ * 0x0000_0000 2G DDR
+ */
+#define CFG_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP)
+#define CFG_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE )
+#define CFG_IBAT0U CFG_DBAT0U
+
+/*
+ * BAT1 1G Cache-inhibited, guarded
+ * 0x8000_0000 256M PCI-1 Memory
+ * 0xa000_0000 256M PCI-Express 1 Memory
+ * 0x9000_0000 256M PCI-Express 2 Memory
+ */
+
+#define CFG_DBAT1L (CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
+ | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT1U (CFG_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP)
+#define CFG_IBAT1L (CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT1U CFG_DBAT1U
+
+/*
+ * BAT2 16M Cache-inhibited, guarded
+ * 0xe100_0000 1M PCI-1 I/O
+ */
+
+#define CFG_DBAT2L (CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
+ | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U (CFG_PCI1_IO_PHYS | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L (CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U CFG_DBAT2U
+
+/*
+ * BAT3 32M Cache-inhibited, guarded
+ * 0xe200_0000 1M PCI-Express 2 I/O
+ * 0xe300_0000 1M PCI-Express 1 I/O
+ */
+
+#define CFG_DBAT3L (CFG_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
+ | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U (CFG_PCIE2_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_IBAT3L (CFG_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U CFG_DBAT3U
+
+/*
+ * BAT4 4M Cache-inhibited, guarded
+ * 0xe000_0000 4M CCSR
+ */
+#define CFG_DBAT4L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT \
+ | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT4U (CFG_CCSRBAR | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CFG_IBAT4L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT4U CFG_DBAT4U
+
+/*
+ * BAT5 128K Cacheable, non-guarded
+ * 0xe400_0000 128K Init RAM for stack in the CPU DCache (no backing memory)
+ */
+#define CFG_DBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_DBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_IBAT5L CFG_DBAT5L
+#define CFG_IBAT5U CFG_DBAT5U
+
+/*
+ * BAT6 256M Cache-inhibited, guarded
+ * 0xf000_0000 256M FLASH
+ */
+#define CFG_DBAT6L (CFG_FLASH_BASE | BATL_PP_RW | BATL_CACHEINHIBIT \
+ | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT6U (CFG_FLASH_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT6L (CFG_FLASH_BASE | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U CFG_DBAT6U
+
+/*
+ * BAT7 4M Cache-inhibited, guarded
+ * 0xe800_0000 4M PIXIS
+ */
+#define CFG_DBAT7L (PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT \
+ | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT7U (PIXIS_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CFG_IBAT7L (PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT7U CFG_DBAT7U
+
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_ENV_SECT_SIZE 0x20000 /* 126k (one sector) for env */
+#define CFG_ENV_SIZE 0x2000
+#else
+#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+#define CFG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
+#if defined(CFG_RAMBOOT)
+#undef CONFIG_CMD_ENV
+#endif
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_USB
+#endif
+
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*DIU Configuration*/
+#define DIU_CONNECT_TO_DVI /* DIU controller connects to DVI encoder*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE 32768
+#define CFG_CACHELINE_SIZE 32
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_IPADDR 192.168.1.100
+
+#define CONFIG_HOSTNAME unknown
+#define CONFIG_ROOTPATH /opt/nfsroot
+#define CONFIG_BOOTFILE uImage
+#define CONFIG_UBOOTPATH 8610hpcd/u-boot.bin
+
+#define CONFIG_SERVERIP 192.168.1.1
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_NETMASK 255.255.255.0
+
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR 1000000
+
+#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE 115200
+
+#if defined(CONFIG_PCI1)
+#define PCI_ENV \
+ "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
+ "echo e;md ${a}e00 9\0" \
+ "pci1regs=setenv a e0008; run pcireg\0" \
+ "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
+ "pci d.w $b.0 56 1\0" \
+ "pcierrc=mw ${a}e00 ffffffff; pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff;" \
+ "pci w.w $b.0 56 ffff\0" \
+ "pci1err=setenv a e0008; run pcierr\0" \
+ "pci1errc=setenv a e0008; run pcierrc\0"
+#else
+#define PCI_ENV ""
+#endif
+
+#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2)
+#define PCIE_ENV \
+ "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
+ "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
+ "pcie1regs=setenv a e000a; run pciereg\0" \
+ "pcie2regs=setenv a e0009; run pciereg\0" \
+ "pcieerr=md ${a}020 1; md ${a}e00; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;"\
+ "pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;" \
+ "pci d $b.0 130 1\0" \
+ "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;"\
+ "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;" \
+ "pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0" \
+ "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \
+ "pcie1err=setenv a e000a; run pcieerr\0" \
+ "pcie2err=setenv a e0009; run pcieerr\0" \
+ "pcie1errc=setenv a e000a; run pcieerrc\0" \
+ "pcie2errc=setenv a e0009; run pcieerrc\0"
+#else
+#define PCIE_ENV ""
+#endif
+
+#define DMA_ENV \
+ "dma0=mw ${d}104 ffffffff;mw ${d}110 50000;mw ${d}114 $sad0;mw ${d}118 50000;"\
+ "mw ${d}120 $bc0;mw ${d}100 f03c404; mw ${d}11c $dad0; md ${d}100 9\0" \
+ "dma1=mw ${d}184 ffffffff;mw ${d}190 50000;mw ${d}194 $sad1;mw ${d}198 50000;"\
+ "mw ${d}1a0 $bc1;mw ${d}180 f03c404; mw ${d}19c $dad1; md ${d}180 9\0" \
+ "dma2=mw ${d}204 ffffffff;mw ${d}210 50000;mw ${d}214 $sad2;mw ${d}218 50000;"\
+ "mw ${d}220 $bc2;mw ${d}200 f03c404; mw ${d}21c $dad2; md ${d}200 9\0" \
+ "dma3=mw ${d}284 ffffffff;mw ${d}290 50000;mw ${d}294 $sad3;mw ${d}298 50000;"\
+ "mw ${d}2a0 $bc3;mw ${d}280 f03c404; mw ${d}29c $dad3; md ${d}280 9\0"
+
+#ifdef ENV_DEBUG
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot; " \
+ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=2000000\0" \
+ "ramdiskfile=8610hpcd/ramdisk.uboot\0" \
+ "dtbaddr=c00000\0" \
+ "dtbfile=8610hpcd/mpc8610_hpcd.dtb\0" \
+ "bdev=sda3\0" \
+ "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
+ "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
+ "maxcpus=1" \
+ "eoi=mw e00400b0 0\0" \
+ "iack=md e00400a0 1\0" \
+ "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4;" \
+ "md ${a}bf0 4; md ${a}e00 3; md ${a}e20 3; md ${a}e40 7;" \
+ "md ${a}f00 5\0" \
+ "ddr1regs=setenv a e0002; run ddrreg\0" \
+ "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}800 1;" \
+ "md ${a}900 6; md ${a}a00 1; md ${a}b20 3; md ${a}e00 1;" \
+ "md ${a}e60 1; md ${a}ef0 1d\0" \
+ "guregs=setenv a e00e0; run gureg\0" \
+ "mcmreg=md ${a}000 1b; md ${a}bf8 2; md ${a}e00 5\0" \
+ "mcmregs=setenv a e0001; run mcmreg\0" \
+ "diuregs=md e002c000 1d\0" \
+ "dium=mw e002c01c\0" \
+ "diuerr=md e002c014 1\0" \
+ "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0 debug\0" \
+ "monitor=0-DVI\0" \
+ "pmregs=md e00e1000 2b\0" \
+ "lawregs=md e0000c08 4b\0" \
+ "lbcregs=md e0005000 36\0" \
+ "dma0regs=md e0021100 12\0" \
+ "dma1regs=md e0021180 12\0" \
+ "dma2regs=md e0021200 12\0" \
+ "dma3regs=md e0021280 12\0" \
+ PCI_ENV \
+ PCIE_ENV \
+ DMA_ENV
+#else
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=2000000\0" \
+ "ramdiskfile=8610hpcd/ramdisk.uboot\0" \
+ "dtbaddr=c00000\0" \
+ "dtbfile=8610hpcd/mpc8610_hpcd.dtb\0" \
+ "bdev=sda3\0" \
+ "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0\0"\
+ "monitor=0-DVI\0"
+#endif
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr - $dtbaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr $ramdiskaddr $dtbaddr"
+
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs root=/dev/$bdev rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr - $dtbaddr"
+
+#endif /* __CONFIG_H */
#define CONFIG_MPC8641HPCN 1 /* MPC8641HPCN board specific */
#define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */
#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */
-#undef DEBUG
#ifdef RUN_DIAG
#define CFG_DIAG_ADDR 0xff800000
/*
* Pass open firmware flat tree to kernel
*/
-#define CONFIG_OF_FLAT_TREE 1
-#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
-#define OF_CPU "PowerPC,8641@0"
-#define OF_SOC "soc8641@f8000000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc8641@f8000000/serial@4500"
#define CFG_64BIT_VSPRINTF 1
#define CFG_64BIT_STRTOUL 1
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
"ramdiskfile=your.ramdisk.u-boot\0" \
- "dtbaddr=c00000\0" \
- "dtbfile=mpc8641_hpcn.dtb\0" \
+ "fdtaddr=c00000\0" \
+ "fdtfile=mpc8641_hpcn.dtb\0" \
"en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
"dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
"maxcpus=2"
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $loadaddr $bootfile;" \
- "tftp $dtbaddr $dtbfile;" \
- "bootm $loadaddr - $dtbaddr"
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
#define CONFIG_RAMBOOTCOMMAND \
"setenv bootargs root=/dev/ram rw " \
"console=$consoledev,$baudrate $othbootargs;" \
"tftp $ramdiskaddr $ramdiskfile;" \
"tftp $loadaddr $bootfile;" \
- "tftp $dtbaddr $dtbfile;" \
- "bootm $loadaddr $ramdiskaddr $dtbaddr"
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
* set up. While still running from cache, I experienced problems accessing
* the NAND controller. sr - 2006-08-25
*/
+#if defined (CONFIG_NAND_U_BOOT)
#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */
#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */
#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_BASE + (12 << 10)) /* Copy SPL here */
#define CFG_NAND_OOBSIZE 16
#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
+#endif
#ifdef CFG_ENV_IS_IN_NAND
/*
#define NAND_MAX_CHIPS 1
#define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS)
#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
+#define CFG_NAND_QUIET_TEST 1
/*
* Internal Definitions
/* USB */
#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
#define CONFIG_USB_OHCI_NEW
+#define CFG_OHCI_BE_CONTROLLER
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_FAT
#define CONFIG_CMD_USB
/*-----------------------------------------------------------------------
* FPGA stuff
*-----------------------------------------------------------------------*/
-#define CONFIG_FPGA CFG_ALTERA_CYCLON2
+#define CONFIG_FPGA
+#define CONFIG_FPGA_ALTERA
+#define CONFIG_FPGA_CYCLON2
#define CFG_FPGA_CHECK_CTRLC
#define CFG_FPGA_PROG_FEEDBACK
#define CONFIG_FPGA_COUNT 1 /* Ich habe 2 ... aber in
--- /dev/null
+/*
+ * (C) Copyright 2005-2007
+ * Samsung Electronics,
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Configuration settings for the 2420 Samsung Apollon board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
+#define CONFIG_OMAP 1 /* in a TI OMAP core */
+#define CONFIG_OMAP2420 1 /* which is in a 2420 */
+#define CONFIG_OMAP2420_APOLLON 1
+#define CONFIG_APOLLON 1
+#define CONFIG_APOLLON_PLUS 1 /* If you have apollon plus 1.x */
+
+/* Clock config to target*/
+#define PRCM_CONFIG_I 1
+/* #define PRCM_CONFIG_II 1 */
+
+/* Boot method */
+/* uncomment if you use NOR boot */
+/* #define CFG_NOR_BOOT 1 */
+
+/* uncomment if you use NOR on CS3 */
+/* #define CFG_USE_NOR 1 */
+
+#ifdef CFG_NOR_BOOT
+#undef CFG_USE_NOR
+#define CFG_USE_NOR 1
+#endif
+
+#include <asm/arch/omap2420.h> /* get chip and board defs */
+
+#define V_SCLK 12000000
+
+/* input clock of PLL */
+/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */
+#define CONFIG_SYS_CLK_FREQ V_SCLK
+
+#undef CONFIG_USE_IRQ /* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+#define CONFIG_REVISION_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + SZ_128K)
+#define CFG_GBL_DATA_SIZE 128 /* bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * SMC91c96 Etherent
+ */
+#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96_BASE (APOLLON_CS1_BASE+0x300)
+#define CONFIG_LAN91C96_EXT_PHY
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */
+
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE (-4)
+#define CFG_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */
+#define CFG_NS16550_COM1 OMAP2420_UART1
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1 1 /* UART1 on H4 */
+
+ /*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C
+#define CFG_I2C_SPEED 100000
+#define CFG_I2C_SLAVE 1
+#define CONFIG_DRIVER_OMAP24XX_I2C
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ONENAND
+
+#undef CONFIG_CMD_AUTOSCRIPT
+
+#ifndef CFG_USE_NOR
+# undef CONFIG_CMD_FLASH
+# undef CONFIG_CMD_IMLS
+#endif
+
+#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
+
+#define CONFIG_BOOTDELAY 1
+
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 192.168.116.25
+#define CONFIG_SERVERIP 192.168.116.1
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_ETHADDR 00:0E:99:00:24:20
+
+#ifdef CONFIG_APOLLON_PLUS
+# define CONFIG_BOOTARGS "root=/dev/nfs rw mem=64M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2"
+#else
+# define CONFIG_BOOTARGS "root=/dev/nfs rw mem=128M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2"
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "Image=tftp 0x80008000 Image; go 0x80008000\0" \
+ "zImage=tftp 0x80180000 zImage; go 0x80180000\0" \
+ "uImage=tftp 0x80180000 uImage; bootm 0x80180000\0" \
+ "uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0" \
+ "xloader=tftp 0x80180000 x-load.bin; cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0" \
+ "syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0" \
+ "syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0" \
+ "norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0" \
+ "oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0"\
+ "onesyncboot=run syncmode oneboot\0" \
+ "bootcmd=run uboot\0"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT "Apollon # "
+
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT V_PROMPT
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */
+#define CFG_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M)
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */
+
+/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2)
+ * or by 32KHz clk, or from external sig. This rate is divided by a local
+ * divisor.
+ */
+#define V_PVT 7 /* use with 12MHz/128 */
+
+#define CFG_TIMERBASE OMAP2420_GPT2
+#define CFG_PVT V_PVT /* 2^(pvt+1) */
+#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE SZ_128K /* regular stack */
+#ifdef CONFIG_USE_IRQ
+# define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */
+# define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* CS1 may or may not be populated */
+#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE SZ_128M
+#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#ifdef CFG_USE_NOR
+/* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */
+# define CFG_FLASH_BASE 0x18000000
+# define CFG_MAX_FLASH_BANKS 1
+# define CFG_MAX_FLASH_SECT 1024
+/*-----------------------------------------------------------------------
+
+ * CFI FLASH driver setup
+ */
+# define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
+# define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
+/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */ /* Use buffered writes (~10x faster) */
+# define CFG_FLASH_PROTECTION 1 /* Use h/w sector protection*/
+
+#else /* !CFG_USE_NOR */
+# define CFG_NO_FLASH 1
+#endif /* CFG_USE_NOR */
+
+/* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */
+#define CFG_ONENAND_BASE 0x00000000
+#define CFG_ENV_IS_IN_ONENAND 1
+#define CFG_ENV_ADDR 0x00020000
+
+#endif /* __CONFIG_H */
"cp.l 100000 f0000b28 1\0" \
"ideargs=setenv bootargs root=/dev/hda1 rw\0" \
"ide_boot=ext2load ide 0:1 200000 uImage;" \
- "run ideargs addip addcons enable_disp;bootm" \
+ "run ideargs addip addcons enable_disp;bootm\0" \
"brightness=255\0" \
""
/*
* Flash configuration
*/
-#define CFG_FLASH_BASE 0xFFE00000
-
-#define CFG_FLASH_SIZE 0x00200000 /* 2 MByte */
-#define CFG_MAX_FLASH_SECT 35 /* max num of sects on one chip */
-
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000) /* second sector */
-#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
- (= chip selects) */
-#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1
+#define CFG_FLASH_BASE 0xffe00000
+#define CFG_FLASH_SIZE 0x00200000
+#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
/*
* Environment settings
*/
#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000)
#define CFG_ENV_SIZE 0x2000
#define CFG_ENV_SECT_SIZE 0x2000
#define CONFIG_ENV_OVERWRITE 1
+#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */
/*
* Memory map
#define CFG_SDRAM_BASE 0x00000000
#define CFG_DEFAULT_MBAR 0x80000000
-#define CONFIG_MPC5200_DDR
+/*
+ * SDRAM controller configuration
+ */
+#undef CONFIG_SDR_MT48LC16M16A2
+#undef CONFIG_DDR_MT46V16M16
+#undef CONFIG_DDR_MT46V32M16
+#undef CONFIG_DDR_HYB25D512160BF
+#define CONFIG_DDR_K4H511638C
/* Use ON-Chip SRAM until RAM will be available */
#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
# define CFG_RAMBOOT 1
#endif
-#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
#define SPD_EEPROM_ADDRESS {0x51, 0x52} /* SPD i2c spd addresses*/
#define CONFIG_DDR_ECC 1 /* with ECC support */
+#define CONFIG_DDR_RQDC_FIXED 0x80000038 /* optimal value found by GDA*/
#undef CONFIG_STRESS
/*-----------------------------------------------------------------------
/*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Larry Johnson, lrj@acm.org
*
* (C) Copyright 2006-2007
#define CFG_EBC_PB2AP 0x04017300
#define CFG_EBC_PB2CR (CFG_CPLD_BASE | 0x00038000)
+/*-----------------------------------------------------------------------
+ * GPIO Setup
+ *
+ * Korat GPIO usage:
+ *
+ * Init.
+ * Pin Source I/O value Function
+ * ------ ------ --- ----- ---------------------------------
+ * GPIO00 Alt1 I/O x PerAddr07
+ * GPIO01 Alt1 I/O x PerAddr06
+ * GPIO02 Alt1 I/O x PerAddr05
+ * GPIO03 GPIO x x GPIO03 to expansion bus connector
+ * GPIO04 GPIO x x GPIO04 to expansion bus connector
+ * GPIO05 GPIO x x GPIO05 to expansion bus connector
+ * GPIO06 Alt1 O x PerCS1 (2nd NOR flash)
+ * GPIO07 Alt1 O x PerCS2 (CPLD)
+ * GPIO08 Alt1 O x PerCS3 to expansion bus connector
+ * GPIO09 Alt1 O x PerCS4 to expansion bus connector
+ * GPIO10 Alt1 O x PerCS5 to expansion bus connector
+ * GPIO11 Alt1 I x PerErr
+ * GPIO12 GPIO O 0 ATMega !Reset
+ * GPIO13 GPIO O 1 SPI Atmega !SS
+ * GPIO14 GPIO O 1 Write protect EEPROM #1 (0xA8)
+ * GPIO15 GPIO O 0 CPU Run LED !On
+ * GPIO16 Alt1 O x GMC1TxD0
+ * GPIO17 Alt1 O x GMC1TxD1
+ * GPIO18 Alt1 O x GMC1TxD2
+ * GPIO19 Alt1 O x GMC1TxD3
+ * GPIO20 Alt1 I x RejectPkt0
+ * GPIO21 Alt1 I x RejectPkt1
+ * GPIO22 GPIO I x PGOOD_DDR
+ * GPIO23 Alt1 O x SCPD0
+ * GPIO24 Alt1 O x GMC0TxD2
+ * GPIO25 Alt1 O x GMC0TxD3
+ * GPIO26 GPIO? I/O x IIC0SDA (selected in SDR0_PFC4)
+ * GPIO27 GPIO O 0 PHY #0 1000BASE-X select
+ * GPIO28 GPIO O 0 PHY #1 1000BASE-X select
+ * GPIO29 GPIO I x Test jumper !Present
+ * GPIO30 GPIO I x SFP module #0 !Present
+ * GPIO31 GPIO I x SFP module #1 !Present
+ *
+ * GPIO32 GPIO O 1 SFP module #0 Tx !Enable
+ * GPIO33 GPIO O 1 SFP module #1 Tx !Enable
+ * GPIO34 Alt2 I x !UART1_CTS
+ * GPIO35 Alt2 O x !UART1_RTS
+ * GPIO36 Alt1 I x !UART0_CTS
+ * GPIO37 Alt1 O x !UART0_RTS
+ * GPIO38 Alt2 O x UART1_Tx
+ * GPIO39 Alt2 I x UART1_Rx
+ * GPIO40 Alt1 I x IRQ0 (Ethernet 0)
+ * GPIO41 Alt1 I x IRQ1 (Ethernet 1)
+ * GPIO42 Alt1 I x IRQ2 (PCI interrupt)
+ * GPIO43 Alt1 I x IRQ3 (System Alert from CPLD)
+ * GPIO44 xxxx x x (grounded through pulldown)
+ * GPIO45 GPIO O 0 PHY #0 Enable
+ * GPIO46 GPIO O 0 PHY #1 Enable
+ * GPIO47 GPIO I x Reset switch !Pressed
+ * GPIO48 GPIO I x Shutdown switch !Pressed
+ * GPIO49 xxxx x x (reserved for trace port)
+ * . . . . .
+ * . . . . .
+ * . . . . .
+ * GPIO63 xxxx x x (reserved for trace port)
+*----------------------------------------------------------------------*/
+
+#define CFG_GPIO_ATMEGA_SS_ 13
+#define CFG_GPIO_PHY0_FIBER_SEL 27
+#define CFG_GPIO_PHY1_FIBER_SEL 28
+#define CFG_GPIO_SFP0_PRESENT_ 30
+#define CFG_GPIO_SFP1_PRESENT_ 31
+#define CFG_GPIO_SFP0_TX_EN_ 32
+#define CFG_GPIO_SFP1_TX_EN_ 33
+#define CFG_GPIO_PHY0_EN 45
+#define CFG_GPIO_PHY1_EN 46
+
+/*-----------------------------------------------------------------------
+ * PPC440 GPIO Configuration
+ */
+#define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
+{ \
+/* GPIO Core 0 */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \
+{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \
+{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \
+{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO13 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO16 GMCTxD(4) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO17 GMCTxD(5) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO18 GMCTxD(6) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO19 GMCTxD(7) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO24 GMCTxD(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO25 GMCTxD(3) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28 USB2D_TXVALID */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \
+}, \
+{ \
+/* GPIO Core 1 */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \
+} \
+}
+
/*
* Internal Definitions
*
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer
*----------------------------------------------------------------------*/
-/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */
-#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */
-#define CFG_OCM_DATA_ADDR CFG_OCM_BASE
-
+/*
+ * On LWMON5 we use D-cache as init-ram and stack pointer. We also move
+ * the POST_WORD from OCM to a 440EPx register that preserves it's
+ * content during reset (GPT0_COM6). This way we reserve the OCM (16k)
+ * for logbuffer only.
+ */
+#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
+#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CFG_INIT_RAM_END (4 << 10)
-#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
-#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6)
+ /* unused GPT0 COMP reg */
/*-----------------------------------------------------------------------
* Serial Port
#endif
/* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8349@0"
-#define OF_SOC "soc8349@e0000000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#define CONFIG_CMD_PING
#if defined(CONFIG_PCI)
- #define CONFG_CMD_PCI
+ #define CONFIG_CMD_PCI
#endif
#if defined(CFG_RAMBOOT)
#define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS)
#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
+/*-----------------------------------------------------------------------
+ * PPC440 GPIO Configuration
+ */
+/* test-only: take GPIO init from pcs440ep ???? in config file */
+#define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
+{ \
+/* GPIO Core 0 */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO14 */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO15 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO16 GMCTxD(4) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO17 GMCTxD(5) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO18 GMCTxD(6) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO19 GMCTxD(7) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO23 SCPD0 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO24 GMCTxD(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO25 GMCTxD(3) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO28 USB2D_TXVALID */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \
+}, \
+{ \
+/* GPIO Core 1 */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \
+{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \
+} \
+}
+
/*
* Internal Definitions
*
const char *prop, u32 val, int create);
int fdt_fixup_memory(void *blob, u64 start, u64 size);
void fdt_fixup_ethernet(void *fdt, bd_t *bd);
+int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
+ const void *val, int len, int create);
#ifdef CONFIG_OF_HAS_UBOOT_ENV
int fdt_env(void *fdt);
/* Write-in-place functions */
/**********************************************************************/
+/**
+ * fdt_setprop_inplace - change a property's value, but not its size
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: pointer to data to replace the property value with
+ * @len: length of the property value
+ *
+ * fdt_setprop_inplace() replaces the value of a given property with
+ * the data in val, of length len. This function cannot change the
+ * size of a property, and so will only work if len is equal to the
+ * current length of the property.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, if len is not equal to the property's current length
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
const void *val, int len);
+
+/**
+ * fdt_setprop_inplace_cell - change the value of a single-cell property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: cell (32-bit integer) value to replace the property with
+ *
+ * fdt_setprop_inplace_cell() replaces the value of a given property
+ * with the 32-bit integer cell value in val, converting val to
+ * big-endian if necessary. This function cannot change the size of a
+ * property, and so will only work if the property already exists and
+ * has length 4.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, if the property's length is not equal to 4
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
const char *name, uint32_t val)
{
return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val));
}
+/**
+ * fdt_nop_property - replace a property with nop tags
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to nop
+ * @name: name of the property to nop
+ *
+ * fdt_nop_property() will replace a given property's representation
+ * in the blob with FDT_NOP tags, effectively removing it from the
+ * tree.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the property, and will not alter or move any other part of the
+ * tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
int fdt_nop_property(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_nop_node - replace a node (subtree) with nop tags
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to nop
+ *
+ * fdt_nop_node() will replace a given node's representation in the
+ * blob, including all its subnodes, if any, with FDT_NOP tags,
+ * effectively removing it from the tree.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the node and its properties and subnodes, and will not alter or
+ * move any other part of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
int fdt_nop_node(void *fdt, int nodeoffset);
/**********************************************************************/
int fdt_open_into(const void *fdt, void *buf, int bufsize);
int fdt_pack(void *fdt);
+/**
+ * fdt_add_mem_rsv - add one memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @addres, @size: 64-bit values (native endian)
+ *
+ * Adds a reserve map entry to the given blob reserving a region at
+ * address address of length size.
+ *
+ * This function will insert data into the reserve map and will
+ * therfore change the indexes of some entries in the table.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new reservation entry
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size);
+
+/**
+ * fdt_del_mem_rsv - remove a memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @n: entry to remove
+ *
+ * fdt_del_mem_rsv() removes the n-th memory reserve map entry from
+ * the blob.
+ *
+ * This function will delete data from the reservation table and will
+ * therfore change the indexes of some entries in the table.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there
+ * are less than n+1 reserve map entries)
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
int fdt_del_mem_rsv(void *fdt, int n);
+/**
+ * fdt_setprop - create or change a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: pointer to data to set the property value to
+ * @len: length of the property value
+ *
+ * fdt_setprop() sets the value of the named property in the given
+ * node to the given value and length, creeating the property if it
+ * does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
int fdt_setprop(void *fdt, int nodeoffset, const char *name,
const void *val, int len);
+
+/**
+ * fdt_setprop_cell - set a property to a single cell value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 32-bit integer value for the property (native endian)
+ *
+ * fdt_setprop_cell() sets the value of the named property in the
+ * given node to the given cell value (converting to big-endian if
+ * necessary), or creates a new property with that value if it does
+ * not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
uint32_t val)
{
val = cpu_to_fdt32(val);
return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val));
}
+
+/**
+ * fdt_setprop_string - set a property to a string value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @str: string value for the property
+ *
+ * fdt_setprop_string() sets the value of the named property in the
+ * given node to the given string value (using the length of the
+ * string to determine the new length of the property), or creates a
+ * new property with that value if it does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
#define fdt_setprop_string(fdt, nodeoffset, name, str) \
fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
+
+/**
+ * fdt_delprop - delete a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to nop
+ * @name: name of the property to nop
+ *
+ * fdt_del_property() will delete the given property.
+ *
+ * This function will delete data from the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
int fdt_delprop(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_add_subnode_namelen - creates a new node based on substring
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_add_subnode(), but use only the first namelen
+ * characters of name as the name of the new node. This is useful for
+ * creating subnodes based on a portion of a larger string, such as a
+ * full path.
+ */
int fdt_add_subnode_namelen(void *fdt, int parentoffset,
const char *name, int namelen);
+
+/**
+ * fdt_add_subnode - creates a new node
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ *
+ * fdt_add_subnode() creates a new node as a subnode of the node at
+ * structure block offset parentoffset, with the given name (which
+ * should include the unit address, if any).
+ *
+ * This function will insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+
+ * returns:
+ * structure block offset of the created nodeequested subnode (>=0), on success
+ * -FDT_ERR_NOTFOUND, if the requested subnode does not exist
+ * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag
+ * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of
+ * the given name
+ * -FDT_ERR_NOSPACE, if there is insufficient free space in the
+ * blob to contain the new node
+ * -FDT_ERR_NOSPACE
+ * -FDT_ERR_BADLAYOUT
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings.
+ */
int fdt_add_subnode(void *fdt, int parentoffset, const char *name);
+
+/**
+ * fdt_del_node - delete a node (subtree)
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to nop
+ *
+ * fdt_del_node() will remove the given node, including all its
+ * subnodes if any, from the blob.
+ *
+ * This function will delete data from the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
int fdt_del_node(void *fdt, int nodeoffset);
/**********************************************************************/
/*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
#define SPR_8321E_REV11 0x80660011
#define SPR_8321_REV11 0x80670011
-#define SPR_8311_REV10 0x80B30010
-#define SPR_8311E_REV10 0x80B20010
-#define SPR_8313_REV10 0x80B10010
#define SPR_8313E_REV10 0x80B00010
+#define SPR_8313_REV10 0x80B10010
+#define SPR_8311E_REV10 0x80B20010
+#define SPR_8311_REV10 0x80B30010
+#define SPR_8315E_REV10 0x80B40010
+#define SPR_8315_REV10 0x80B50010
+#define SPR_8314E_REV10 0x80B60010
+#define SPR_8314_REV10 0x80B70010
+
+#define SPR_8379E_REV10 0x80C20010
+#define SPR_8379_REV10 0x80C30010
+#define SPR_8378E_REV10 0x80C40010
+#define SPR_8378_REV10 0x80C50010
+#define SPR_8377E_REV10 0x80C60010
+#define SPR_8377_REV10 0x80C70010
/* SPCR - System Priority Configuration Register
*/
#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority */
#define SPCR_TSEC2EP_SHIFT (31-31)
-#elif defined(CONFIG_MPC831X)
-/* SPCR bits - MPC831x specific */
+#elif defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
+/* SPCR bits - MPC831x and MPC837x specific */
#define SPCR_TSECDP 0x00003000 /* TSEC data priority */
#define SPCR_TSECDP_SHIFT (31-19)
#define SPCR_TSECEP 0x00000C00 /* TSEC emergency priority */
#define SICRL_URT_CTPR 0x06000000
#define SICRL_IRQ_CTPR 0x00C00000
-#elif defined(CONFIG_MPC831X)
-/* SICRL bits - MPC831x specific */
+#elif defined(CONFIG_MPC8313)
+/* SICRL bits - MPC8313 specific */
#define SICRL_LBC 0x30000000
#define SICRL_UART 0x0C000000
#define SICRL_SPI_A 0x03000000
#define SICRL_ETSEC1_A 0x0000000C
#define SICRL_ETSEC2_A 0x00000003
-/* SICRH bits - MPC831x specific */
+/* SICRH bits - MPC8313 specific */
#define SICRH_INTR_A 0x02000000
#define SICRH_INTR_B 0x00C00000
#define SICRH_IIC 0x00300000
#define SICRH_TSOBI1 0x00000002
#define SICRH_TSOBI2 0x00000001
+#elif defined(CONFIG_MPC8315)
+/* SICRL bits - MPC8315 specific */
+#define SICRL_DMA_CH0 0xc0000000
+#define SICRL_DMA_SPI 0x30000000
+#define SICRL_UART 0x0c000000
+#define SICRL_IRQ4 0x02000000
+#define SICRL_IRQ5 0x01800000
+#define SICRL_IRQ6_7 0x00400000
+#define SICRL_IIC1 0x00300000
+#define SICRL_TDM 0x000c0000
+#define SICRL_TDM_SHARED 0x00030000
+#define SICRL_PCI_A 0x0000c000
+#define SICRL_ELBC_A 0x00003000
+#define SICRL_ETSEC1_A 0x000000c0
+#define SICRL_ETSEC1_B 0x00000030
+#define SICRL_ETSEC1_C 0x0000000c
+#define SICRL_TSEXPOBI 0x00000001
+
+/* SICRH bits - MPC8315 specific */
+#define SICRH_GPIO_0 0xc0000000
+#define SICRH_GPIO_1 0x30000000
+#define SICRH_GPIO_2 0x0c000000
+#define SICRH_GPIO_3 0x03000000
+#define SICRH_GPIO_4 0x00c00000
+#define SICRH_GPIO_5 0x00300000
+#define SICRH_GPIO_6 0x000c0000
+#define SICRH_GPIO_7 0x00030000
+#define SICRH_GPIO_8 0x0000c000
+#define SICRH_GPIO_9 0x00003000
+#define SICRH_GPIO_10 0x00000c00
+#define SICRH_GPIO_11 0x00000300
+#define SICRH_ETSEC2_A 0x000000c0
+#define SICRH_TSOBI1 0x00000002
+#define SICRH_TSOBI2 0x00000001
+
+#elif defined(CONFIG_MPC837X)
+/* SICRL bits - MPC837x specific */
+#define SICRL_USB_A 0xC0000000
+#define SICRL_USB_B 0x30000000
+#define SICRL_UART 0x0C000000
+#define SICRL_GPIO_A 0x02000000
+#define SICRL_GPIO_B 0x01000000
+#define SICRL_GPIO_C 0x00800000
+#define SICRL_GPIO_D 0x00400000
+#define SICRL_GPIO_E 0x00200000
+#define SICRL_GPIO_F 0x00180000
+#define SICRL_GPIO_G 0x00040000
+#define SICRL_GPIO_H 0x00020000
+#define SICRL_GPIO_I 0x00010000
+#define SICRL_GPIO_J 0x00008000
+#define SICRL_GPIO_K 0x00004000
+#define SICRL_GPIO_L 0x00003000
+#define SICRL_DMA_A 0x00000800
+#define SICRL_DMA_B 0x00000400
+#define SICRL_DMA_C 0x00000200
+#define SICRL_DMA_D 0x00000100
+#define SICRL_DMA_E 0x00000080
+#define SICRL_DMA_F 0x00000040
+#define SICRL_DMA_G 0x00000020
+#define SICRL_DMA_H 0x00000010
+#define SICRL_DMA_I 0x00000008
+#define SICRL_DMA_J 0x00000004
+#define SICRL_LDP_A 0x00000002
+#define SICRL_LDP_B 0x00000001
+
+/* SICRH bits - MPC837x specific */
+#define SICRH_DDR 0x80000000
+#define SICRH_TSEC1_A 0x10000000
+#define SICRH_TSEC1_B 0x08000000
+#define SICRH_TSEC2_A 0x00400000
+#define SICRH_TSEC2_B 0x00200000
+#define SICRH_TSEC2_C 0x00100000
+#define SICRH_TSEC2_D 0x00080000
+#define SICRH_TSEC2_E 0x00040000
+#define SICRH_TMR 0x00010000
+#define SICRH_GPIO2_A 0x00008000
+#define SICRH_GPIO2_B 0x00004000
+#define SICRH_GPIO2_C 0x00002000
+#define SICRH_GPIO2_D 0x00001000
+#define SICRH_GPIO2_E 0x00000C00
+#define SICRH_GPIO2_F 0x00000300
+#define SICRH_GPIO2_G 0x000000C0
+#define SICRH_GPIO2_H 0x00000030
+#define SICRH_SPI 0x00000003
#endif
/* SWCRR - System Watchdog Control Register
#define HRCWL_CE_TO_PLL_1X29 0x0000001D
#define HRCWL_CE_TO_PLL_1X30 0x0000001E
#define HRCWL_CE_TO_PLL_1X31 0x0000001F
+
+#elif defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+#define HRCWL_SVCOD 0x30000000
+#define HRCWL_SVCOD_SHIFT 28
+#define HRCWL_SVCOD_DIV_4 0x00000000
+#define HRCWL_SVCOD_DIV_8 0x10000000
+#define HRCWL_SVCOD_DIV_2 0x20000000
+#define HRCWL_SVCOD_DIV_1 0x30000000
#endif
/* HRCWH - Hardware Reset Configuration Word High
#if defined(CONFIG_MPC834X)
#define HRCWH_ROM_LOC_PCI2 0x00200000
#endif
+#if defined(CONIFG_MPC837X)
+#define HRCWH_ROM_LOC_ON_CHIP_ROM 0x00300000
+#endif
#define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000
#define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000
#define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000
-#if defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
#define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000
#define HRCWH_ROM_LOC_NAND_SP_16BIT 0x00200000
#define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000
/* RSR - Reset Status Register
*/
+#if defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
+#define RSR_RSTSRC 0xF0000000 /* Reset source */
+#define RSR_RSTSRC_SHIFT 28
+#else
#define RSR_RSTSRC 0xE0000000 /* Reset source */
#define RSR_RSTSRC_SHIFT 29
+#endif
#define RSR_BSF 0x00010000 /* Boot seq. fail */
#define RSR_BSF_SHIFT 16
#define RSR_SWSR 0x00002000 /* software soft reset */
#define SCCR_PCICM 0x00010000
#define SCCR_PCICM_SHIFT 16
-/* SCCR bits - MPC8349 specific */
-#ifdef CONFIG_MPC834X
+#if defined(CONFIG_MPC834X)
+/* SCCR bits - MPC834x specific */
#define SCCR_TSEC1CM 0xc0000000
#define SCCR_TSEC1CM_SHIFT 30
#define SCCR_TSEC1CM_0 0x00000000
#define SCCR_TSEC2CM_2 0x20000000
#define SCCR_TSEC2CM_3 0x30000000
-#elif defined(CONFIG_MPC831X)
+/* The MPH must have the same clock ratio as DR, unless its clock disabled */
+#define SCCR_USBMPHCM 0x00c00000
+#define SCCR_USBMPHCM_SHIFT 22
+#define SCCR_USBDRCM 0x00300000
+#define SCCR_USBDRCM_SHIFT 20
+#define SCCR_USBCM 0x00f00000
+#define SCCR_USBCM_SHIFT 20
+#define SCCR_USBCM_0 0x00000000
+#define SCCR_USBCM_1 0x00500000
+#define SCCR_USBCM_2 0x00A00000
+#define SCCR_USBCM_3 0x00F00000
+
+#elif defined(CONFIG_MPC8313)
/* TSEC1 bits are for TSEC2 as well */
#define SCCR_TSEC1CM 0xc0000000
#define SCCR_TSEC1CM_SHIFT 30
#define SCCR_TSEC2ON 0x10000000
#define SCCR_TSEC2ON_SHIFT 28
-#endif
+#define SCCR_USBDRCM 0x00300000
+#define SCCR_USBDRCM_SHIFT 20
+#define SCCR_USBDRCM_0 0x00000000
+#define SCCR_USBDRCM_1 0x00100000
+#define SCCR_USBDRCM_2 0x00200000
+#define SCCR_USBDRCM_3 0x00300000
+
+#elif defined(CONFIG_MPC8315)
+/* SCCR bits - MPC8315 specific */
+#define SCCR_TSEC1CM 0xc0000000
+#define SCCR_TSEC1CM_SHIFT 30
+#define SCCR_TSEC1CM_0 0x00000000
+#define SCCR_TSEC1CM_1 0x40000000
+#define SCCR_TSEC1CM_2 0x80000000
+#define SCCR_TSEC1CM_3 0xC0000000
+
+#define SCCR_TSEC2CM 0x30000000
+#define SCCR_TSEC2CM_SHIFT 28
+#define SCCR_TSEC2CM_0 0x00000000
+#define SCCR_TSEC2CM_1 0x10000000
+#define SCCR_TSEC2CM_2 0x20000000
+#define SCCR_TSEC2CM_3 0x30000000
-#define SCCR_USBMPHCM 0x00c00000
-#define SCCR_USBMPHCM_SHIFT 22
#define SCCR_USBDRCM 0x00300000
#define SCCR_USBDRCM_SHIFT 20
+#define SCCR_USBDRCM_0 0x00000000
+#define SCCR_USBDRCM_1 0x00100000
+#define SCCR_USBDRCM_2 0x00200000
+#define SCCR_USBDRCM_3 0x00300000
+
+#define SCCR_PCIEXP1CM 0x00080000
+#define SCCR_PCIEXP2CM 0x00040000
+
+#define SCCR_SATA1CM 0x0000c000
+#define SCCR_SATA1CM_SHIFT 14
+#define SCCR_SATACM 0x0000f000
+#define SCCR_SATACM_SHIFT 8
+#define SCCR_SATACM_0 0x00000000
+#define SCCR_SATACM_1 0x00005000
+#define SCCR_SATACM_2 0x0000a000
+#define SCCR_SATACM_3 0x0000f000
+
+#define SCCR_TDMCM 0x000000c0
+#define SCCR_TDMCM_SHIFT 6
+#define SCCR_TDMCM_0 0x00000000
+#define SCCR_TDMCM_1 0x00000040
+#define SCCR_TDMCM_2 0x00000080
+#define SCCR_TDMCM_3 0x000000c0
+
+#elif defined(CONFIG_MPC837X)
+/* SCCR bits - MPC837x specific */
+#define SCCR_TSEC1CM 0xc0000000
+#define SCCR_TSEC1CM_SHIFT 30
+#define SCCR_TSEC1CM_0 0x00000000
+#define SCCR_TSEC1CM_1 0x40000000
+#define SCCR_TSEC1CM_2 0x80000000
+#define SCCR_TSEC1CM_3 0xC0000000
-#define SCCR_USBCM_0 0x00000000
-#define SCCR_USBCM_1 0x00500000
-#define SCCR_USBCM_2 0x00A00000
-#define SCCR_USBCM_3 0x00F00000
+#define SCCR_TSEC2CM 0x30000000
+#define SCCR_TSEC2CM_SHIFT 28
+#define SCCR_TSEC2CM_0 0x00000000
+#define SCCR_TSEC2CM_1 0x10000000
+#define SCCR_TSEC2CM_2 0x20000000
+#define SCCR_TSEC2CM_3 0x30000000
+
+#define SCCR_SDHCCM 0x0c000000
+#define SCCR_SDHCCM_SHIFT 26
+#define SCCR_SDHCCM_0 0x00000000
+#define SCCR_SDHCCM_1 0x04000000
+#define SCCR_SDHCCM_2 0x08000000
+#define SCCR_SDHCCM_3 0x0c000000
+
+#define SCCR_USBDRCM 0x00c00000
+#define SCCR_USBDRCM_SHIFT 22
+#define SCCR_USBDRCM_0 0x00000000
+#define SCCR_USBDRCM_1 0x00400000
+#define SCCR_USBDRCM_2 0x00800000
+#define SCCR_USBDRCM_3 0x00c00000
+
+#define SCCR_PCIEXP1CM 0x00300000
+#define SCCR_PCIEXP1CM_SHIFT 20
+#define SCCR_PCIEXP1CM_0 0x00000000
+#define SCCR_PCIEXP1CM_1 0x00100000
+#define SCCR_PCIEXP1CM_2 0x00200000
+#define SCCR_PCIEXP1CM_3 0x00300000
+
+#define SCCR_PCIEXP2CM 0x000c0000
+#define SCCR_PCIEXP2CM_SHIFT 18
+#define SCCR_PCIEXP2CM_0 0x00000000
+#define SCCR_PCIEXP2CM_1 0x00040000
+#define SCCR_PCIEXP2CM_2 0x00080000
+#define SCCR_PCIEXP2CM_3 0x000c0000
+
+/* All of the four SATA controllers must have the same clock ratio */
+#define SCCR_SATA1CM 0x000000c0
+#define SCCR_SATA1CM_SHIFT 6
+#define SCCR_SATACM 0x000000ff
+#define SCCR_SATACM_SHIFT 0
+#define SCCR_SATACM_0 0x00000000
+#define SCCR_SATACM_1 0x00000055
+#define SCCR_SATACM_2 0x000000aa
+#define SCCR_SATACM_3 0x000000ff
+#endif
/* CSn_BDNS - Chip Select memory Bounds Register
*/
#define BR_MS_UPMA 0x00000080 /* UPMA */
#define BR_MS_UPMB 0x000000A0 /* UPMB */
#define BR_MS_UPMC 0x000000C0 /* UPMC */
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+#if !defined(CONFIG_MPC834X)
#define BR_ATOM 0x0000000C
#define BR_ATOM_SHIFT 2
#endif
#if defined(CONFIG_MPC834X)
#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V)
-#elif defined(CONFIG_MPC8360)
+#else
#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V)
#endif
#define LTESR_CS 0x00080000
#define LTESR_CC 0x00000001
-/* DDR Control Driver Register
+/* DDRCDR - DDR Control Driver Register
*/
#define DDRCDR_EN 0x40000000
#define DDRCDR_PZ 0x3C000000
extern int eth_init(bd_t *bis); /* Initialize the device */
extern int eth_send(volatile void *packet, int length); /* Send a packet */
+#ifdef CONFIG_API
+extern int eth_receive(volatile void *packet, int length); /* Receive a packet */
+#endif
extern int eth_rx(void); /* Check for received packets */
extern void eth_halt(void); /* stop SCC */
extern char *eth_get_name(void); /* get name of current device */
#define SDRAM_ECCCR 0x98 /* ECC error status */
#define SDRAM_CID 0xA4 /* core ID */
#define SDRAM_RID 0xA8 /* revision ID */
+#define SDRAM_RTSR 0xB1 /* run time status tracking */
/*-----------------------------------------------------------------------------+
| Memory Controller Status
#define SDRAM_RFDC_ARSE_ENABLE 0x00000000
#define SDRAM_RFDC_RFOS_MASK 0x007F0000
#define SDRAM_RFDC_RFOS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
-#define SDRAM_RFDC_RFFD_MASK 0x000003FF
-#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define SDRAM_RFDC_RFFD_MASK 0x000007FF
+#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x7FF)<<0)
#define SDRAM_RFDC_RFFD_MAX 0x7FF
#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000
#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000
+#define SDRAM_CLKTR_CLKP_90_DEG_ADV 0x40000000
/*-----------------------------------------------------------------------------+
| SDRAM Write Timing Register
#define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */
#define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */
+#define SDRAM_RTSR_TRK1SM_MASK 0xC0000000 /* Tracking State Mach 1*/
+#define SDRAM_RTSR_TRK1SM_ATBASE 0x00000000 /* atbase state */
+#define SDRAM_RTSR_TRK1SM_MISSED 0x40000000 /* missed state */
+#define SDRAM_RTSR_TRK1SM_ATPLS1 0x80000000 /* atpls1 state */
+#define SDRAM_RTSR_TRK1SM_RESET 0xC0000000 /* reset state */
+
#define SDR0_MFR_FIXD 0x10000000 /* Workaround for PCI/DMA */
#endif /* CONFIG_440SPE */
#define plb1_bearl (PLB_ARBITER_BASE+ 0x0C)
#define plb1_bearh (PLB_ARBITER_BASE+ 0x0D)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* Pin Function Control Register 1 */
#define SDR0_PFC1 0x4101
#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */
#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */
-#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
+#define GPT0_COMP6 0x00000098
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define SDR0_USB2D0CR 0x0320
Xilinx_init_fn init;
Xilinx_done_fn done;
Xilinx_wr_fn wr;
+ Xilinx_post_fn post;
int relocated;
} Xilinx_Spartan2_Slave_Serial_fns;
#define XILINX_XC2S50_SIZE 559232/8
#define XILINX_XC2S100_SIZE 781248/8
#define XILINX_XC2S150_SIZE 1040128/8
+#define XILINX_XC2S200_SIZE 1335872/8
/* Spartan-IIE (1.8V) */
#define XILINX_XC2S50E_SIZE 630048/8
#define XILINX_XC2S150_DESC(iface, fn_table, cookie) \
{ Xilinx_Spartan2, iface, XILINX_XC2S150_SIZE, fn_table, cookie }
+#define XILINX_XC2S200_DESC(iface, fn_table, cookie) \
+{ Xilinx_Spartan2, iface, XILINX_XC2S200_SIZE, fn_table, cookie }
+
#define XILINX_XC2S50E_DESC(iface, fn_table, cookie) \
{ Xilinx_Spartan2, iface, XILINX_XC2S50E_SIZE, fn_table, cookie }
Xilinx_init_fn init;
Xilinx_done_fn done;
Xilinx_wr_fn wr;
+ Xilinx_post_fn post;
int relocated;
} Xilinx_Spartan3_Slave_Serial_fns;
#define XILINX_XC3S1200E_SIZE 3841184/8
#define XILINX_XC3S1600E_SIZE 5969696/8
+/* Spartan-IIIE (1.2V) */
+#define XILINX_XC3S1200E_SIZE 3841184/8
+
/* Descriptor Macros
*********************************************************************/
-/* Spartan-II devices */
+/* Spartan-III devices */
#define XILINX_XC3S50_DESC(iface, fn_table, cookie) \
{ Xilinx_Spartan3, iface, XILINX_XC3S50_SIZE, fn_table, cookie }
#define XILINX_XC3S1600E_DESC(iface, fn_table, cookie) \
{ Xilinx_Spartan3, iface, XILINX_XC3S1600E_SIZE, fn_table, cookie }
+
+/* Spartan-IIIE devices */
+#define XILINX_XC3S1200E_DESC(iface, fn_table, cookie) \
+{ Xilinx_Spartan3, iface, XILINX_XC3S1200E_SIZE, fn_table, cookie }
+
#endif /* _SPARTAN3_H_ */
*********************************************************************/
#define CFG_SPARTAN2 CFG_FPGA_DEV( 0x1 )
#define CFG_VIRTEX_E CFG_FPGA_DEV( 0x2 )
-#define CFG_VIRTEX2 CFG_FPGA_DEV( 0x4 )
+#define CFG_VIRTEX2 CFG_FPGA_DEV( 0x4 )
#define CFG_SPARTAN3 CFG_FPGA_DEV( 0x8 )
#define CFG_XILINX_SPARTAN2 (CFG_FPGA_XILINX | CFG_SPARTAN2)
#define CFG_XILINX_VIRTEX_E (CFG_FPGA_XILINX | CFG_VIRTEX_E)
-#define CFG_XILINX_VIRTEX2 (CFG_FPGA_XILINX | CFG_VIRTEX2)
+#define CFG_XILINX_VIRTEX2 (CFG_FPGA_XILINX | CFG_VIRTEX2)
#define CFG_XILINX_SPARTAN3 (CFG_FPGA_XILINX | CFG_SPARTAN3)
/* XXX - Add new models here */
puts ("Net: ");
#endif
eth_initialize(gd->bd);
+#if defined(CONFIG_RESET_PHY_R)
+ debug ("Reset Ethernet PHY\n");
+ reset_phy();
+#endif
#endif
/* main_loop() can return to retry autoboot, if so just run it again. */
for (;;) {
memmove(buf + mem_rsv_off, fdt + fdt_off_mem_rsvmap(fdt), mem_rsv_size);
fdt_set_off_mem_rsvmap(buf, mem_rsv_off);
- memcpy(buf + struct_off, fdt + fdt_off_dt_struct(fdt), struct_size);
+ memmove(buf + struct_off, fdt + fdt_off_dt_struct(fdt), struct_size);
fdt_set_off_dt_struct(buf, struct_off);
fdt_set_size_dt_struct(buf, struct_size);
- memcpy(buf + strings_off, fdt + fdt_off_dt_strings(fdt),
- fdt_size_dt_strings(fdt));
+ memmove(buf + strings_off, fdt + fdt_off_dt_strings(fdt),
+ fdt_size_dt_strings(fdt));
fdt_set_off_dt_strings(buf, strings_off);
fdt_set_size_dt_strings(buf, fdt_size_dt_strings(fdt));
}
CFLAGS += -DCONFIG_NAND_SPL
SOBJS = start.o init.o resetvec.o
-COBJS = nand_boot.o nand_ecc.o ndfc.o sdram.o
+COBJS = denali_data_eye.o nand_boot.o nand_ecc.o ndfc.o sdram.o
SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
# create symbolic links for common files
# from cpu directory
+$(obj)denali_data_eye.c:
+ @rm -f $(obj)denali_data_eye.c
+ ln -s $(SRCTREE)/cpu/ppc4xx/denali_data_eye.c $(obj)denali_data_eye.c
+
$(obj)ndfc.c:
@rm -f $(obj)ndfc.c
ln -s $(SRCTREE)/cpu/ppc4xx/ndfc.c $(obj)ndfc.c
extern int atstk1000_eth_initialize(bd_t *);
extern int mcffec_initialize(bd_t*);
+#ifdef CONFIG_API
+extern void (*push_packet)(volatile void *, int);
+
+static struct {
+ uchar data[PKTSIZE];
+ int length;
+} eth_rcv_bufs[PKTBUFSRX];
+
+static unsigned int eth_rcv_current = 0, eth_rcv_last = 0;
+#endif
+
static struct eth_device *eth_devices, *eth_current;
struct eth_device *eth_get_dev(void)
int eth_initialize(bd_t *bis)
{
- char enetvar[32], env_enetaddr[6];
+ char enetvar[32];
+ unsigned char env_enetaddr[6];
int i, eth_number = 0;
char *tmp, *end;
#if defined(CONFIG_UEC_ETH2)
uec_initialize(1);
#endif
+#if defined(CONFIG_UEC_ETH3)
+ uec_initialize(2);
+#endif
#if defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
fec_initialize(bis);
struct eth_device* old_current;
if (!eth_current)
- return 0;
+ return -1;
old_current = eth_current;
do {
debug ("Trying %s\n", eth_current->name);
- if (eth_current->init(eth_current, bis)) {
+ if (!eth_current->init(eth_current,bis)) {
eth_current->state = ETH_STATE_ACTIVE;
- return 1;
+ return 0;
}
debug ("FAIL\n");
eth_try_another(0);
} while (old_current != eth_current);
- return 0;
+ return -1;
}
void eth_halt(void)
return eth_current->recv(eth_current);
}
+#ifdef CONFIG_API
+static void eth_save_packet(volatile void *packet, int length)
+{
+ volatile char *p = packet;
+ int i;
+
+ if ((eth_rcv_last+1) % PKTBUFSRX == eth_rcv_current)
+ return;
+
+ if (PKTSIZE < length)
+ return;
+
+ for (i = 0; i < length; i++)
+ eth_rcv_bufs[eth_rcv_last].data[i] = p[i];
+
+ eth_rcv_bufs[eth_rcv_last].length = length;
+ eth_rcv_last = (eth_rcv_last + 1) % PKTBUFSRX;
+}
+
+int eth_receive(volatile void *packet, int length)
+{
+ volatile char *p = packet;
+ void *pp = push_packet;
+ int i;
+
+ if (eth_rcv_current == eth_rcv_last) {
+ push_packet = eth_save_packet;
+ eth_rx();
+ push_packet = pp;
+
+ if (eth_rcv_current == eth_rcv_last)
+ return -1;
+ }
+
+ if (length < eth_rcv_bufs[eth_rcv_current].length)
+ return -1;
+
+ length = eth_rcv_bufs[eth_rcv_current].length;
+
+ for (i = 0; i < length; i++)
+ p[i] = eth_rcv_bufs[eth_rcv_current].data[i];
+
+ eth_rcv_current = (eth_rcv_current + 1) % PKTBUFSRX;
+ return length;
+}
+#endif /* CONFIG_API */
+
void eth_try_another(int first_restart)
{
static struct eth_device *first_failed = NULL;
{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
uchar NetEtherNullAddr[6] =
{ 0, 0, 0, 0, 0, 0 };
+#ifdef CONFIG_API
+void (*push_packet)(volatile void *, int len) = 0;
+#endif
#if defined(CONFIG_CMD_CDP)
uchar NetCDPAddr[6] = /* Ethernet bcast address */
{ 0x01, 0x00, 0x0c, 0xcc, 0xcc, 0xcc };
NetSetHandler (startAgainHandler);
#else /* !CONFIG_NET_MULTI*/
eth_halt ();
+#if !defined(CONFIG_NET_DO_NOT_TRY_ANOTHER)
eth_try_another (!NetRestarted);
+#endif
eth_init (gd->bd);
if (NetRestartWrap) {
NetRestartWrap = 0;
if (len < ETHER_HDR_SIZE)
return;
+#ifdef CONFIG_API
+ if (push_packet) {
+ (*push_packet)(inpkt, len);
+ return;
+ }
+#endif
+
#if defined(CONFIG_CMD_CDP)
/* keep track if packet is CDP */
iscdp = memcmp(et->et_dest, NetCDPAddr, 6) == 0;
"SPR test",
"spr",
"This test checks SPR contents.",
- POST_ROM | POST_ALWAYS | POST_PREREL,
+ POST_RAM | POST_ALWAYS,
&spr_post_test,
NULL,
NULL,
#
ifeq ($(HOSTOS),cygwin)
SFX = .exe
+HOST_CFLAGS += -ansi
else
SFX =
endif
-all: easylogo.c
- gcc easylogo.c -o easylogo
+CFLAGS += -Wall
+
+all: easylogo
+
+clean:
+ rm -f easylogo *.o
+
+.PHONY: all clean
*/
#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
#pragma pack(1)
/*#define ENABLE_ASCII_BANNERS */
typedef struct {
- unsigned char id;
- unsigned char ColorMapType;
- unsigned char ImageTypeCode;
- unsigned short ColorMapOrigin;
- unsigned short ColorMapLenght;
- unsigned char ColorMapEntrySize;
- unsigned short ImageXOrigin;
- unsigned short ImageYOrigin;
- unsigned short ImageWidth;
- unsigned short ImageHeight;
- unsigned char ImagePixelSize;
- unsigned char ImageDescriptorByte;
+ unsigned char id;
+ unsigned char ColorMapType;
+ unsigned char ImageTypeCode;
+ unsigned short ColorMapOrigin;
+ unsigned short ColorMapLenght;
+ unsigned char ColorMapEntrySize;
+ unsigned short ImageXOrigin;
+ unsigned short ImageYOrigin;
+ unsigned short ImageWidth;
+ unsigned short ImageHeight;
+ unsigned char ImagePixelSize;
+ unsigned char ImageDescriptorByte;
} tga_header_t;
typedef struct {
- unsigned char r,g,b ;
-} rgb_t ;
+ unsigned char r, g, b;
+} rgb_t;
typedef struct {
- unsigned char b,g,r ;
-} bgr_t ;
+ unsigned char b, g, r;
+} bgr_t;
typedef struct {
- unsigned char Cb,y1,Cr,y2;
-} yuyv_t ;
+ unsigned char Cb, y1, Cr, y2;
+} yuyv_t;
typedef struct {
- unsigned char *data,
- *palette ;
- int width,
- height,
- pixels,
- bpp,
- pixel_size,
- size,
- palette_size,
- yuyv;
-} image_t ;
+ void *data, *palette;
+ int width, height, pixels, bpp, pixel_size, size, palette_size, yuyv;
+} image_t;
void StringUpperCase (char *str)
{
- int count = strlen(str);
- char c ;
-
- while(count--)
- {
- c=*str;
- if ((c >= 'a')&&(c<='z'))
- *str = 'A' + (c-'a');
- str++ ;
- }
+ int count = strlen (str);
+ char c;
+
+ while (count--) {
+ c = *str;
+ if ((c >= 'a') && (c <= 'z'))
+ *str = 'A' + (c - 'a');
+ str++;
+ }
}
void StringLowerCase (char *str)
{
- int count = strlen(str);
- char c ;
-
- while(count--)
- {
- c=*str;
- if ((c >= 'A')&&(c<='Z'))
- *str = 'a' + (c-'A');
- str++ ;
- }
+ int count = strlen (str);
+ char c;
+
+ while (count--) {
+ c = *str;
+ if ((c >= 'A') && (c <= 'Z'))
+ *str = 'a' + (c - 'A');
+ str++;
+ }
}
-void pixel_rgb_to_yuyv (rgb_t *rgb_pixel, yuyv_t *yuyv_pixel)
+void pixel_rgb_to_yuyv (rgb_t * rgb_pixel, yuyv_t * yuyv_pixel)
{
- unsigned int pR, pG, pB ;
+ unsigned int pR, pG, pB;
- /* Transform (0-255) components to (0-100) */
- pR = rgb_pixel->r * 100 / 255 ;
- pG = rgb_pixel->g * 100 / 255 ;
- pB = rgb_pixel->b * 100 / 255 ;
+ /* Transform (0-255) components to (0-100) */
+ pR = rgb_pixel->r * 100 / 255;
+ pG = rgb_pixel->g * 100 / 255;
+ pB = rgb_pixel->b * 100 / 255;
- /* Calculate YUV values (0-255) from RGB beetween 0-100 */
- yuyv_pixel->y1 = yuyv_pixel->y2 = 209 * (pR + pG + pB) / 300 + 16 ;
- yuyv_pixel->Cb = pB - (pR/4) - (pG*3/4) + 128 ;
- yuyv_pixel->Cr = pR - (pG*3/4) - (pB/4) + 128 ;
+ /* Calculate YUV values (0-255) from RGB beetween 0-100 */
+ yuyv_pixel->y1 = yuyv_pixel->y2 = 209 * (pR + pG + pB) / 300 + 16;
+ yuyv_pixel->Cb = pB - (pR / 4) - (pG * 3 / 4) + 128;
+ yuyv_pixel->Cr = pR - (pG * 3 / 4) - (pB / 4) + 128;
- return ;
+ return;
}
-void printlogo_rgb (rgb_t *data, int w, int h)
+void printlogo_rgb (rgb_t * data, int w, int h)
{
- int x,y;
- for (y=0; y<h; y++)
- {
- for (x=0; x<w; x++, data++)
- if ((data->r < 30)/*&&(data->g == 0)&&(data->b == 0)*/)
- printf(" ");
- else
- printf("X");
- printf("\n");
- }
+ int x, y;
+
+ for (y = 0; y < h; y++) {
+ for (x = 0; x < w; x++, data++)
+ if ((data->r <
+ 30) /*&&(data->g == 0)&&(data->b == 0) */ )
+ printf (" ");
+ else
+ printf ("X");
+ printf ("\n");
+ }
}
void printlogo_yuyv (unsigned short *data, int w, int h)
{
- int x,y;
- for (y=0; y<h; y++)
- {
- for (x=0; x<w; x++, data++)
- if (*data == 0x1080) /* Because of inverted on i386! */
- printf(" ");
- else
- printf("X");
- printf("\n");
- }
+ int x, y;
+
+ for (y = 0; y < h; y++) {
+ for (x = 0; x < w; x++, data++)
+ if (*data == 0x1080) /* Because of inverted on i386! */
+ printf (" ");
+ else
+ printf ("X");
+ printf ("\n");
+ }
}
-int image_load_tga (image_t *image, char *filename)
+static inline unsigned short le16_to_cpu (unsigned short val)
{
- FILE *file ;
- tga_header_t header ;
- int i;
- unsigned char app ;
- rgb_t *p ;
+ union {
+ unsigned char pval[2];
+ unsigned short val;
+ } swapped;
- if( ( file = fopen( filename, "rb" ) ) == NULL )
- return -1;
-
- fread(&header, sizeof(header), 1, file);
-
- image->width = header.ImageWidth ;
- image->height = header.ImageHeight ;
+ swapped.val = val;
+ return (swapped.pval[1] << 8) + swapped.pval[0];
+}
- switch (header.ImageTypeCode){
- case 2: /* Uncompressed RGB */
- image->yuyv = 0 ;
- image->palette_size = 0 ;
- image->palette = NULL ;
- break;
+int image_load_tga (image_t * image, char *filename)
+{
+ FILE *file;
+ tga_header_t header;
+ int i;
+ unsigned char app;
+ rgb_t *p;
+
+ if ((file = fopen (filename, "rb")) == NULL)
+ return -1;
+
+ fread (&header, sizeof (header), 1, file);
+
+ /* byte swap: tga is little endian, host is ??? */
+ header.ColorMapOrigin = le16_to_cpu (header.ColorMapOrigin);
+ header.ColorMapLenght = le16_to_cpu (header.ColorMapLenght);
+ header.ImageXOrigin = le16_to_cpu (header.ImageXOrigin);
+ header.ImageYOrigin = le16_to_cpu (header.ImageYOrigin);
+ header.ImageWidth = le16_to_cpu (header.ImageWidth);
+ header.ImageHeight = le16_to_cpu (header.ImageHeight);
+
+ image->width = header.ImageWidth;
+ image->height = header.ImageHeight;
+
+ switch (header.ImageTypeCode) {
+ case 2: /* Uncompressed RGB */
+ image->yuyv = 0;
+ image->palette_size = 0;
+ image->palette = NULL;
+ break;
default:
- printf("Format not supported!\n");
- return -1 ;
- }
+ printf ("Format not supported!\n");
+ return -1;
+ }
- image->bpp = header.ImagePixelSize ;
- image->pixel_size = ((image->bpp-1) / 8) + 1 ;
- image->pixels = image->width * image->height;
- image->size = image->pixels * image->pixel_size ;
- image->data = malloc(image->size) ;
+ image->bpp = header.ImagePixelSize;
+ image->pixel_size = ((image->bpp - 1) / 8) + 1;
+ image->pixels = image->width * image->height;
+ image->size = image->pixels * image->pixel_size;
+ image->data = malloc (image->size);
- if (image->bpp != 24)
- {
- printf("Bpp not supported: %d!\n", image->bpp);
- return -1 ;
- }
+ if (image->bpp != 24) {
+ printf ("Bpp not supported: %d!\n", image->bpp);
+ return -1;
+ }
- fread(image->data, image->size, 1, file);
+ fread (image->data, image->size, 1, file);
/* Swapping R and B values */
- p = image->data ;
- for(i=0; i < image->pixels; i++, p++)
- {
- app = p->r ;
- p->r = p->b ;
- p->b = app ;
- }
+ p = image->data;
+ for (i = 0; i < image->pixels; i++, p++) {
+ app = p->r;
+ p->r = p->b;
+ p->b = app;
+ }
/* Swapping image */
- if(!(header.ImageDescriptorByte & 0x20))
- {
- unsigned char *temp = malloc(image->size);
- int linesize = image->pixel_size * image->width ;
- void *dest = image->data,
- *source = temp + image->size - linesize ;
-
- printf("S");
- if (temp == NULL)
- {
- printf("Cannot alloc temp buffer!\n");
- return -1;
- }
+ if (!(header.ImageDescriptorByte & 0x20)) {
+ unsigned char *temp = malloc (image->size);
+ int linesize = image->pixel_size * image->width;
+ void *dest = image->data,
+ *source = temp + image->size - linesize;
- memcpy(temp, image->data, image->size);
- for(i = 0; i<image->height; i++, dest+=linesize, source-=linesize)
- memcpy(dest, source, linesize);
+ printf ("S");
+ if (temp == NULL) {
+ printf ("Cannot alloc temp buffer!\n");
+ return -1;
+ }
- free( temp );
- }
+ memcpy (temp, image->data, image->size);
+ for (i = 0; i < image->height;
+ i++, dest += linesize, source -= linesize)
+ memcpy (dest, source, linesize);
+ free (temp);
+ }
#ifdef ENABLE_ASCII_BANNERS
- printlogo_rgb (image->data,image->width, image->height);
+ printlogo_rgb (image->data, image->width, image->height);
#endif
- fclose (file);
- return 0;
+ fclose (file);
+ return 0;
}
-int image_free (image_t *image)
+int image_free (image_t * image)
{
- if(image->data != NULL)
- free(image->data);
+ if (image->data != NULL)
+ free (image->data);
- if(image->palette != NULL)
- free(image->palette);
+ if (image->palette != NULL)
+ free (image->palette);
return 0;
}
-int image_rgb_to_yuyv (image_t *rgb_image, image_t *yuyv_image)
+int image_rgb_to_yuyv (image_t * rgb_image, image_t * yuyv_image)
{
- rgb_t *rgb_ptr = (rgb_t *) rgb_image->data ;
- yuyv_t yuyv ;
- unsigned short *dest ;
- int count = 0 ;
-
- yuyv_image->pixel_size = 2 ;
- yuyv_image->bpp = 16 ;
- yuyv_image->yuyv = 1 ;
- yuyv_image->width = rgb_image->width ;
- yuyv_image->height = rgb_image->height ;
- yuyv_image->pixels = yuyv_image->width * yuyv_image->height ;
- yuyv_image->size = yuyv_image->pixels * yuyv_image->pixel_size ;
- dest = (unsigned short *) (yuyv_image->data = malloc(yuyv_image->size)) ;
- yuyv_image->palette = 0 ;
- yuyv_image->palette_size= 0 ;
-
- while((count++) < rgb_image->pixels)
- {
+ rgb_t *rgb_ptr = (rgb_t *) rgb_image->data;
+ yuyv_t yuyv;
+ unsigned short *dest;
+ int count = 0;
+
+ yuyv_image->pixel_size = 2;
+ yuyv_image->bpp = 16;
+ yuyv_image->yuyv = 1;
+ yuyv_image->width = rgb_image->width;
+ yuyv_image->height = rgb_image->height;
+ yuyv_image->pixels = yuyv_image->width * yuyv_image->height;
+ yuyv_image->size = yuyv_image->pixels * yuyv_image->pixel_size;
+ dest = (unsigned short *) (yuyv_image->data =
+ malloc (yuyv_image->size));
+ yuyv_image->palette = 0;
+ yuyv_image->palette_size = 0;
+
+ while ((count++) < rgb_image->pixels) {
pixel_rgb_to_yuyv (rgb_ptr++, &yuyv);
- if ((count & 1)==0) /* Was == 0 */
- memcpy (dest, ((void *)&yuyv) + 2, sizeof(short));
+ if ((count & 1) == 0) /* Was == 0 */
+ memcpy (dest, ((void *) &yuyv) + 2, sizeof (short));
else
- memcpy (dest, (void *)&yuyv, sizeof(short));
+ memcpy (dest, (void *) &yuyv, sizeof (short));
- dest ++ ;
+ dest++;
}
#ifdef ENABLE_ASCII_BANNERS
- printlogo_yuyv (yuyv_image->data, yuyv_image->width, yuyv_image->height);
+ printlogo_yuyv (yuyv_image->data, yuyv_image->width,
+ yuyv_image->height);
#endif
- return 0 ;
+ return 0;
}
-int image_save_header (image_t *image, char *filename, char *varname)
+int image_save_header (image_t * image, char *filename, char *varname)
{
- FILE *file = fopen (filename, "w");
- char app[256], str[256]="", def_name[64] ;
- int count = image->size, col=0;
- unsigned char *dataptr = image->data ;
- if (file==NULL)
- return -1 ;
-
-/* Author information */
- fprintf(file, "/*\n * Generated by EasyLogo, (C) 2000 by Paolo Scaffardi\n *\n");
- fprintf(file, " * To use this, include it and call: easylogo_plot(screen,&%s, width,x,y)\n *\n", varname);
- fprintf(file, " * Where:\t'screen'\tis the pointer to the frame buffer\n");
- fprintf(file, " *\t\t'width'\tis the screen width\n");
- fprintf(file, " *\t\t'x'\t\tis the horizontal position\n");
- fprintf(file, " *\t\t'y'\t\tis the vertical position\n */\n\n");
-
-/* Headers */
- fprintf(file, "#include <video_easylogo.h>\n\n");
-/* Macros */
- strcpy(def_name, varname);
+ FILE *file = fopen (filename, "w");
+ char app[256], str[256] = "", def_name[64];
+ int count = image->size, col = 0;
+ unsigned char *dataptr = image->data;
+
+ if (file == NULL)
+ return -1;
+
+ /* Author information */
+ fprintf (file,
+ "/*\n * Generated by EasyLogo, (C) 2000 by Paolo Scaffardi\n *\n");
+ fprintf (file,
+ " * To use this, include it and call: easylogo_plot(screen,&%s, width,x,y)\n *\n",
+ varname);
+ fprintf (file,
+ " * Where:\t'screen'\tis the pointer to the frame buffer\n");
+ fprintf (file, " *\t\t'width'\tis the screen width\n");
+ fprintf (file, " *\t\t'x'\t\tis the horizontal position\n");
+ fprintf (file, " *\t\t'y'\t\tis the vertical position\n */\n\n");
+
+ /* Headers */
+ fprintf (file, "#include <video_easylogo.h>\n\n");
+ /* Macros */
+ strcpy (def_name, varname);
StringUpperCase (def_name);
- fprintf(file, "#define DEF_%s_WIDTH\t\t%d\n", def_name, image->width);
- fprintf(file, "#define DEF_%s_HEIGHT\t\t%d\n", def_name, image->height);
- fprintf(file, "#define DEF_%s_PIXELS\t\t%d\n", def_name, image->pixels);
- fprintf(file, "#define DEF_%s_BPP\t\t%d\n", def_name, image->bpp);
- fprintf(file, "#define DEF_%s_PIXEL_SIZE\t%d\n", def_name, image->pixel_size);
- fprintf(file, "#define DEF_%s_SIZE\t\t%d\n\n", def_name, image->size);
-/* Declaration */
- fprintf(file, "unsigned char DEF_%s_DATA[DEF_%s_SIZE] = {\n", def_name, def_name);
-
-/* Data */
- while(count)
- switch (col){
- case 0:
- sprintf(str, " 0x%02x", *dataptr++);
- col++;
- count-- ;
- break;
-
- case 16:
- fprintf(file, "%s", str);
- if (count > 0)
- fprintf(file,",");
- fprintf(file, "\n");
-
- col = 0 ;
- break;
-
- default:
- strcpy(app, str);
- sprintf(str, "%s, 0x%02x", app, *dataptr++);
- col++ ;
- count-- ;
- break;
+ fprintf (file, "#define DEF_%s_WIDTH\t\t%d\n", def_name,
+ image->width);
+ fprintf (file, "#define DEF_%s_HEIGHT\t\t%d\n", def_name,
+ image->height);
+ fprintf (file, "#define DEF_%s_PIXELS\t\t%d\n", def_name,
+ image->pixels);
+ fprintf (file, "#define DEF_%s_BPP\t\t%d\n", def_name, image->bpp);
+ fprintf (file, "#define DEF_%s_PIXEL_SIZE\t%d\n", def_name,
+ image->pixel_size);
+ fprintf (file, "#define DEF_%s_SIZE\t\t%d\n\n", def_name,
+ image->size);
+ /* Declaration */
+ fprintf (file, "unsigned char DEF_%s_DATA[DEF_%s_SIZE] = {\n",
+ def_name, def_name);
+
+ /* Data */
+ while (count)
+ switch (col) {
+ case 0:
+ sprintf (str, " 0x%02x", *dataptr++);
+ col++;
+ count--;
+ break;
+
+ case 16:
+ fprintf (file, "%s", str);
+ if (count > 0)
+ fprintf (file, ",");
+ fprintf (file, "\n");
+
+ col = 0;
+ break;
+
+ default:
+ strcpy (app, str);
+ sprintf (str, "%s, 0x%02x", app, *dataptr++);
+ col++;
+ count--;
+ break;
}
if (col)
- fprintf(file, "%s\n", str);
-
-/* End of declaration */
- fprintf(file, "};\n\n");
-/* Variable */
- fprintf(file, "fastimage_t %s = {\n", varname);
- fprintf(file, " DEF_%s_DATA,\n", def_name);
- fprintf(file, " DEF_%s_WIDTH,\n", def_name);
- fprintf(file, " DEF_%s_HEIGHT,\n", def_name);
- fprintf(file, " DEF_%s_BPP,\n", def_name);
- fprintf(file, " DEF_%s_PIXEL_SIZE,\n", def_name);
- fprintf(file, " DEF_%s_SIZE\n};\n", def_name);
+ fprintf (file, "%s\n", str);
+
+ /* End of declaration */
+ fprintf (file, "};\n\n");
+ /* Variable */
+ fprintf (file, "fastimage_t %s = {\n", varname);
+ fprintf (file, " DEF_%s_DATA,\n", def_name);
+ fprintf (file, " DEF_%s_WIDTH,\n", def_name);
+ fprintf (file, " DEF_%s_HEIGHT,\n", def_name);
+ fprintf (file, " DEF_%s_BPP,\n", def_name);
+ fprintf (file, " DEF_%s_PIXEL_SIZE,\n", def_name);
+ fprintf (file, " DEF_%s_SIZE\n};\n", def_name);
fclose (file);
- return 0 ;
+ return 0;
}
#define DEF_FILELEN 256
int main (int argc, char *argv[])
{
- char
- inputfile[DEF_FILELEN],
- outputfile[DEF_FILELEN],
- varname[DEF_FILELEN];
-
- image_t rgb_logo, yuyv_logo ;
-
- switch (argc){
- case 2:
- case 3:
- case 4:
- strcpy (inputfile, argv[1]);
-
- if (argc > 2)
- strcpy (varname, argv[2]);
- else
- {
- int pos = strchr(inputfile, '.');
-
- if (pos >= 0)
- {
- strncpy (varname, inputfile, pos);
- varname[pos] = 0 ;
- }
- }
+ char inputfile[DEF_FILELEN],
+ outputfile[DEF_FILELEN], varname[DEF_FILELEN];
+
+ image_t rgb_logo, yuyv_logo;
+
+ switch (argc) {
+ case 2:
+ case 3:
+ case 4:
+ strcpy (inputfile, argv[1]);
+
+ if (argc > 2)
+ strcpy (varname, argv[2]);
+ else {
+ char *dot = strchr (inputfile, '.');
+ int pos = dot - inputfile;
+
+ if (dot) {
+ strncpy (varname, inputfile, pos);
+ varname[pos] = 0;
+ }
+ }
- if (argc > 3)
- strcpy (outputfile, argv[3]);
- else
- {
- int pos = strchr (varname, '.');
+ if (argc > 3)
+ strcpy (outputfile, argv[3]);
+ else {
+ char *dot = strchr (varname, '.');
+ int pos = dot - varname;
- if (pos > 0)
- {
- char app[DEF_FILELEN] ;
+ if (dot) {
+ char app[DEF_FILELEN];
- strncpy(app, varname, pos);
- sprintf(outputfile, "%s.h", app);
- }
- }
- break;
+ strncpy (app, varname, pos);
+ app[pos] = 0;
+ sprintf (outputfile, "%s.h", app);
+ }
+ }
+ break;
- default:
- printf("EasyLogo 1.0 (C) 2000 by Paolo Scaffardi\n\n");
+ default:
+ printf ("EasyLogo 1.0 (C) 2000 by Paolo Scaffardi\n\n");
- printf("Syntax: easylogo inputfile [outputvar {outputfile}] \n");
- printf("\n");
- printf("Where: 'inputfile' is the TGA image to load\n");
- printf(" 'outputvar' is the variable name to create\n");
- printf(" 'outputfile' is the output header file (default is 'inputfile.h')\n");
+ printf("Syntax: easylogo inputfile [outputvar {outputfile}] \n");
+ printf("\n");
+ printf("Where: 'inputfile' is the TGA image to load\n");
+ printf(" 'outputvar' is the variable name to create\n");
+ printf(" 'outputfile' is the output header file (default is 'inputfile.h')\n");
- return -1 ;
- }
+ return -1;
+ }
- printf("Doing '%s' (%s) from '%s'...",
- outputfile, varname, inputfile);
+ printf ("Doing '%s' (%s) from '%s'...",
+ outputfile, varname, inputfile);
-/* Import TGA logo */
+ /* Import TGA logo */
- printf("L");
- if (image_load_tga (&rgb_logo, inputfile)<0)
- {
- printf("input file not found!\n");
- exit(1);
- }
+ printf ("L");
+ if (image_load_tga (&rgb_logo, inputfile) < 0) {
+ printf ("input file not found!\n");
+ exit (1);
+ }
-/* Convert it to YUYV format */
+ /* Convert it to YUYV format */
- printf("C");
- image_rgb_to_yuyv (&rgb_logo, &yuyv_logo) ;
+ printf ("C");
+ image_rgb_to_yuyv (&rgb_logo, &yuyv_logo);
-/* Save it into a header format */
+ /* Save it into a header format */
- printf("S");
- image_save_header (&yuyv_logo, outputfile, varname) ;
+ printf ("S");
+ image_save_header (&yuyv_logo, outputfile, varname);
-/* Free original image and copy */
+ /* Free original image and copy */
- image_free (&rgb_logo);
- image_free (&yuyv_logo);
+ image_free (&rgb_logo);
+ image_free (&yuyv_logo);
- printf("\n");
+ printf ("\n");
- return 0 ;
+ return 0;
}
projects / oweals / u-boot.git / commitdiff