board: tbs2910: Convert pci to driver model

So we can get rid of legacy pci config code.

PCI_PNP is not required for this board, remove it to reduce the size of the
u-boot binary.

DM_PCI does not start the host controller automatically anymore. Do so
in preboot instead.

Signed-off-by: Soeren Moch <smoch@web.de>

diff --git a/board/tbs/tbs2910/tbs2910.c b/board/tbs/tbs2910/tbs2910.c
index d8db7a884f5cd2642509e5721fbcce1df0a1cd04..efc6f88198fd22dd003a4721026dfb24f71697ad 100644 (file)
--- a/board/tbs/tbs2910/tbs2910.c
+++ b/board/tbs/tbs2910/tbs2910.c
@@ -22,10 +22,6 @@
 #include <asm/arch/sys_proto.h>
 DECLARE_GLOBAL_DATA_PTR;
 
-#define WEAK_PULLUP    (PAD_CTL_PUS_47K_UP |                   \
-       PAD_CTL_SPEED_LOW | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |   \
-       PAD_CTL_SRE_SLOW)
-
 #define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                  \
        PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |                 \
        PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
@@ -63,13 +59,6 @@ static iomux_v3_cfg_t const enet_pads[] = {
        MX6_PAD_ENET_CRS_DV__GPIO1_IO25         | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
-static iomux_v3_cfg_t const pcie_pads[] = {
-       /* W_DISABLE# */
-       MX6_PAD_KEY_COL4__GPIO4_IO14 | MUX_PAD_CTRL(WEAK_PULLUP),
-       /* PERST# */
-       MX6_PAD_GPIO_17__GPIO7_IO12  | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
 int dram_init(void)
 {
        gd->ram_size = 2048ul * 1024 * 1024;
@@ -87,11 +76,6 @@ static void setup_iomux_enet(void)
        gpio_set_value(IMX_GPIO_NR(1, 25), 1);
 }
 
-static void setup_pcie(void)
-{
-       imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads));
-}
-
 static void setup_iomux_uart(void)
 {
        imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
@@ -236,7 +220,6 @@ int board_phy_config(struct phy_device *phydev)
 int board_eth_init(bd_t *bis)
 {
        setup_iomux_enet();
-       setup_pcie();
        return cpu_eth_init(bis);
 }
 

diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
index 3148a325e98a36058ea53dbb480a3b851ad7f9db..98e5ca0846c07079a798ea8736b9018f35cbb565 100644 (file)
--- a/configs/tbs2910_defconfig
+++ b/configs/tbs2910_defconfig
@@ -9,7 +9,7 @@ CONFIG_CMD_HDMIDETECT=y
 CONFIG_AHCI=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="usb start; if hdmidet; then run set_con_hdmi; else run set_con_serial; fi"
+CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start; if hdmidet; then run set_con_hdmi; else run set_con_serial; fi"
 CONFIG_PRE_CONSOLE_BUFFER=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOUNCE_BUFFER=y
@@ -54,6 +54,8 @@ CONFIG_FSL_USDHC=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
 CONFIG_PCI=y
+CONFIG_DM_PCI=y
+# CONFIG_PCI_PNP is not set
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
 CONFIG_DM_RTC=y