powerpc: Remove P1022DS_36BIT_NAND_defconfig board
authorJagan Teki <jagan@amarulasolutions.com>
Sat, 13 Jun 2020 07:52:12 +0000 (13:22 +0530)
committerJagan Teki <jagan@amarulasolutions.com>
Thu, 18 Jun 2020 16:17:08 +0000 (21:47 +0530)
DM_SPI and other driver model migration deadlines
are expired for this board.

Remove it.

Patch-cc: Timur Tabi <timur@tabi.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
21 files changed:
arch/powerpc/cpu/mpc85xx/Kconfig
board/freescale/p1022ds/Kconfig [deleted file]
board/freescale/p1022ds/MAINTAINERS [deleted file]
board/freescale/p1022ds/Makefile [deleted file]
board/freescale/p1022ds/README [deleted file]
board/freescale/p1022ds/ddr.c [deleted file]
board/freescale/p1022ds/diu.c [deleted file]
board/freescale/p1022ds/law.c [deleted file]
board/freescale/p1022ds/p1022ds.c [deleted file]
board/freescale/p1022ds/spl.c [deleted file]
board/freescale/p1022ds/spl_minimal.c [deleted file]
board/freescale/p1022ds/tlb.c [deleted file]
configs/P1022DS_36BIT_NAND_defconfig [deleted file]
configs/P1022DS_36BIT_SDCARD_defconfig [deleted file]
configs/P1022DS_36BIT_SPIFLASH_defconfig [deleted file]
configs/P1022DS_36BIT_defconfig [deleted file]
configs/P1022DS_NAND_defconfig [deleted file]
configs/P1022DS_SDCARD_defconfig [deleted file]
configs/P1022DS_SPIFLASH_defconfig [deleted file]
configs/P1022DS_defconfig [deleted file]
include/configs/P1022DS.h [deleted file]

index a7672ee3f2933c1727e5c424d9aaafb74b5d287d..ee3b15e2285d6497f9ecea6a5c8c316638065e38 100644 (file)
@@ -109,14 +109,6 @@ config TARGET_P1010RDB_PB
        imply CMD_SATA
        imply PANIC_HANG
 
-config TARGET_P1022DS
-       bool "Support P1022DS"
-       select ARCH_P1022
-       select SUPPORT_SPL
-       select SUPPORT_TPL
-       imply CMD_SATA
-       imply FSL_SATA
-
 config TARGET_P1023RDB
        bool "Support P1023RDB"
        select ARCH_P1023
@@ -1557,7 +1549,6 @@ source "board/freescale/mpc8568mds/Kconfig"
 source "board/freescale/mpc8569mds/Kconfig"
 source "board/freescale/mpc8572ds/Kconfig"
 source "board/freescale/p1010rdb/Kconfig"
-source "board/freescale/p1022ds/Kconfig"
 source "board/freescale/p1023rdb/Kconfig"
 source "board/freescale/p1_p2_rdb_pc/Kconfig"
 source "board/freescale/p1_twr/Kconfig"
diff --git a/board/freescale/p1022ds/Kconfig b/board/freescale/p1022ds/Kconfig
deleted file mode 100644 (file)
index f1792de..0000000
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_P1022DS
-
-config SYS_BOARD
-       default "p1022ds"
-
-config SYS_VENDOR
-       default "freescale"
-
-config SYS_CONFIG_NAME
-       default "P1022DS"
-
-endif
diff --git a/board/freescale/p1022ds/MAINTAINERS b/board/freescale/p1022ds/MAINTAINERS
deleted file mode 100644 (file)
index 62256c3..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
-P1022DS BOARD
-M:     Timur Tabi <timur@tabi.org>
-S:     Maintained
-F:     board/freescale/p1022ds/
-F:     include/configs/P1022DS.h
-F:     configs/P1022DS_defconfig
-F:     configs/P1022DS_36BIT_defconfig
-F:     configs/P1022DS_36BIT_NAND_defconfig
-F:     configs/P1022DS_36BIT_SDCARD_defconfig
-F:     configs/P1022DS_36BIT_SPIFLASH_defconfig
-F:     configs/P1022DS_NAND_defconfig
-F:     configs/P1022DS_SDCARD_defconfig
-F:     configs/P1022DS_SPIFLASH_defconfig
diff --git a/board/freescale/p1022ds/Makefile b/board/freescale/p1022ds/Makefile
deleted file mode 100644 (file)
index 699e5b5..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2010 Freescale Semiconductor, Inc.
-
-MINIMAL=
-
-ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_INIT_MINIMAL
-MINIMAL=y
-endif
-endif
-
-ifdef MINIMAL
-obj-y  += spl_minimal.o
-else
-ifdef CONFIG_SPL_BUILD
-obj-y  += spl.o
-endif
-obj-y  += p1022ds.o
-obj-y  += ddr.o
-obj-$(CONFIG_FSL_DIU_FB) += diu.o
-endif
-
-obj-y  += law.o
-obj-y  += tlb.o
diff --git a/board/freescale/p1022ds/README b/board/freescale/p1022ds/README
deleted file mode 100644 (file)
index 04d9197..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-Overview
---------
-P1022ds is a Low End Dual core platform supporting the P1022 processor
-of QorIQ series. P1022 is an e500 based dual core SOC.
-
-
-Pin Multiplex(hwconfig setting)
--------------------------------
-Add the environment 'usb2', 'audclk' and 'tdm' to support pin multiplex
-via hwconfig, i.e:
-'setenv hwconfig usb2' to enable USB2 and disable eTsec2
-'setenv hwconfig tdm' to enable TDM and disable Audio
-'setenv hwconfig audclk:12' to enable Audio(codec clock sources is 12MHz)
- and disable TDM
-'setenv hwconfig 'usb2;tdm' to enable USB2 and TDM, disable eTsec2 and Audio
-'setenv hwconfig 'usb2;audclk:11' to enable USB2 and Audio(codec clock sources
- is 11MHz), disable eTsec2 and TDM
-
-Warning: TDM and AUDIO can not enable simultaneous !
-and AUDIO codec clock sources only setting as 11MHz or 12MHz !
-'setenv hwconfig 'audclk:12;tdm'       --- error !
-'setenv hwconfig 'audclk:11;tdm'       --- error !
-'setenv hwconfig 'audclk:10'           --- error !
diff --git a/board/freescale/p1022ds/ddr.c b/board/freescale/p1022ds/ddr.c
deleted file mode 100644 (file)
index 7093211..0000000
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010 Freescale Semiconductor, Inc.
- * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
- *          Timur Tabi <timur@freescale.com>
- */
-
-#include <common.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-struct board_specific_parameters {
-       u32 n_ranks;
-       u32 datarate_mhz_high;
-       u32 clk_adjust;         /* Range: 0-8 */
-       u32 cpo;                /* Range: 2-31 */
-       u32 write_data_delay;   /* Range: 0-6 */
-       u32 force_2t;
-};
-
-/*
- * This table contains all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- */
-static const struct board_specific_parameters dimm0[] = {
-       /*
-        * memory controller 0
-        *   num|  hi|  clk| cpo|wrdata|2T
-        * ranks| mhz|adjst|    | delay|
-        */
-       {1,  549,    5,  31,     3, 0},
-       {1,  850,    5,  31,     5, 0},
-       {2,  549,    5,  31,     3, 0},
-       {2,  850,    5,  31,     5, 0},
-       {}
-};
-
-void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm,
-                          unsigned int ctrl_num)
-{
-       const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
-       unsigned long ddr_freq;
-       unsigned int i;
-
-
-       if (ctrl_num) {
-               printf("Wrong parameter for controller number %d", ctrl_num);
-               return;
-       }
-       if (!pdimm->n_ranks)
-               return;
-
-       /* set odt_rd_cfg and odt_wr_cfg. */
-       for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-               popts->cs_local_opts[i].odt_rd_cfg = 0;
-               popts->cs_local_opts[i].odt_wr_cfg = 1;
-       }
-
-       pbsp = dimm0;
-       /*
-        * Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
-        * freqency and n_banks specified in board_specific_parameters table.
-        */
-       ddr_freq = get_ddr_freq(0) / 1000000;
-       while (pbsp->datarate_mhz_high) {
-               if (pbsp->n_ranks == pdimm->n_ranks) {
-                       if (ddr_freq <= pbsp->datarate_mhz_high) {
-                               popts->clk_adjust = pbsp->clk_adjust;
-                               popts->cpo_override = pbsp->cpo;
-                               popts->write_data_delay =
-                                       pbsp->write_data_delay;
-                               popts->twot_en = pbsp->force_2t;
-                               goto found;
-                       }
-                       pbsp_highest = pbsp;
-               }
-               pbsp++;
-       }
-
-       if (pbsp_highest) {
-               printf("Error: board specific timing not found "
-                       "for data rate %lu MT/s!\n"
-                       "Trying to use the highest speed (%u) parameters\n",
-                       ddr_freq, pbsp_highest->datarate_mhz_high);
-               popts->clk_adjust = pbsp->clk_adjust;
-               popts->cpo_override = pbsp->cpo;
-               popts->write_data_delay = pbsp->write_data_delay;
-               popts->twot_en = pbsp->force_2t;
-       } else {
-               panic("DIMM is not supported by this board");
-       }
-
-found:
-       popts->half_strength_driver_enable = 1;
-
-       /* Per AN4039, enable ZQ calibration. */
-       popts->zq_en = 1;
-
-       /*
-        * For wake-up on ARP, we need auto self refresh enabled
-        */
-       popts->auto_self_refresh_en = 1;
-       popts->sr_it = 0xb;
-}
diff --git a/board/freescale/p1022ds/diu.c b/board/freescale/p1022ds/diu.c
deleted file mode 100644 (file)
index 918b4b9..0000000
+++ /dev/null
@@ -1,478 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
- * Authors: Timur Tabi <timur@freescale.com>
- *
- * FSL DIU Framebuffer driver
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <command.h>
-#include <log.h>
-#include <linux/ctype.h>
-#include <asm/io.h>
-#include <stdio_dev.h>
-#include <video_fb.h>
-#include "../common/ngpixis.h"
-#include <fsl_diu_fb.h>
-
-/* The CTL register is called 'csr' in the ngpixis_t structure */
-#define PX_CTL_ALTACC          0x80
-
-#define PX_BRDCFG0_ELBC_SPI_MASK       0xc0
-#define PX_BRDCFG0_ELBC_SPI_ELBC       0x00
-#define PX_BRDCFG0_ELBC_SPI_NULL       0xc0
-#define PX_BRDCFG0_ELBC_DIU            0x02
-
-#define PX_BRDCFG1_DVIEN       0x80
-#define PX_BRDCFG1_DFPEN       0x40
-#define PX_BRDCFG1_BACKLIGHT   0x20
-
-#define PMUXCR_ELBCDIU_MASK    0xc0000000
-#define PMUXCR_ELBCDIU_NOR16   0x80000000
-#define PMUXCR_ELBCDIU_DIU     0x40000000
-
-/*
- * DIU Area Descriptor
- *
- * Note that we need to byte-swap the value before it's written to the AD
- * register.  So even though the registers don't look like they're in the same
- * bit positions as they are on the MPC8610, the same value is written to the
- * AD register on the MPC8610 and on the P1022.
- */
-#define AD_BYTE_F              0x10000000
-#define AD_ALPHA_C_SHIFT       25
-#define AD_BLUE_C_SHIFT                23
-#define AD_GREEN_C_SHIFT       21
-#define AD_RED_C_SHIFT         19
-#define AD_PIXEL_S_SHIFT       16
-#define AD_COMP_3_SHIFT                12
-#define AD_COMP_2_SHIFT                8
-#define AD_COMP_1_SHIFT                4
-#define AD_COMP_0_SHIFT                0
-
-/*
- * Variables used by the DIU/LBC switching code.  It's safe to makes these
- * global, because the DIU requires DDR, so we'll only run this code after
- * relocation.
- */
-static u8 px_brdcfg0;
-static u32 pmuxcr;
-static void *lbc_lcs0_ba;
-static void *lbc_lcs1_ba;
-static u32 old_br0, old_or0, old_br1, old_or1;
-static u32 new_br0, new_or0, new_br1, new_or1;
-
-void diu_set_pixel_clock(unsigned int pixclock)
-{
-       ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-       unsigned long speed_ccb, temp;
-       u32 pixval;
-
-       speed_ccb = get_bus_freq(0);
-       temp = 1000000000 / pixclock;
-       temp *= 1000;
-       pixval = speed_ccb / temp;
-       debug("DIU pixval = %u\n", pixval);
-
-       /* Modify PXCLK in GUTS CLKDVDR */
-       temp = in_be32(&gur->clkdvdr) & 0x2000FFFF;
-       out_be32(&gur->clkdvdr, temp);                  /* turn off clock */
-       out_be32(&gur->clkdvdr, temp | 0x80000000 | ((pixval & 0x1F) << 16));
-}
-
-int platform_diu_init(unsigned int xres, unsigned int yres, const char *port)
-{
-       ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-       const char *name;
-       u32 pixel_format;
-       u8 temp;
-       phys_addr_t phys0, phys1; /* BR0/BR1 physical addresses */
-
-       /*
-        * Indirect mode requires both BR0 and BR1 to be set to "GPCM",
-        * otherwise writes to these addresses won't actually appear on the
-        * local bus, and so the PIXIS won't see them.
-        *
-        * In FCM mode, writes go to the NAND controller, which does not pass
-        * them to the localbus directly.  So we force BR0 and BR1 into GPCM
-        * mode, since we don't care about what's behind the localbus any
-        * more.  However, we save those registers first, so that we can
-        * restore them when necessary.
-        */
-       new_br0 = old_br0 = get_lbc_br(0);
-       new_br1 = old_br1 = get_lbc_br(1);
-       new_or0 = old_or0 = get_lbc_or(0);
-       new_or1 = old_or1 = get_lbc_or(1);
-
-       /*
-        * Use the existing BRx/ORx values if it's already GPCM. Otherwise,
-        * force the values to simple 32KB GPCM windows with the most
-        * conservative timing.
-        */
-       if ((old_br0 & BR_MSEL) != BR_MS_GPCM) {
-               new_br0 = (get_lbc_br(0) & BR_BA) | BR_V;
-               new_or0 = OR_AM_32KB | 0xFF7;
-               set_lbc_br(0, new_br0);
-               set_lbc_or(0, new_or0);
-       }
-       if ((old_br1 & BR_MSEL) != BR_MS_GPCM) {
-               new_br1 = (get_lbc_br(1) & BR_BA) | BR_V;
-               new_or1 = OR_AM_32KB | 0xFF7;
-               set_lbc_br(1, new_br1);
-               set_lbc_or(1, new_or1);
-       }
-
-       /*
-        * Determine the physical addresses for Chip Selects 0 and 1.  The
-        * BR0/BR1 registers contain the truncated physical addresses for the
-        * chip selects, mapped via the localbus LAW.  Since the BRx registers
-        * only contain the lower 32 bits of the address, we have to determine
-        * the upper 4 bits some other way.  The proper way is to scan the LAW
-        * table looking for a matching localbus address. Instead, we cheat.
-        * We know that the upper bits are 0 for 32-bit addressing, or 0xF for
-        * 36-bit addressing.
-        */
-#ifdef CONFIG_PHYS_64BIT
-       phys0 = 0xf00000000ULL | (old_br0 & old_or0 & BR_BA);
-       phys1 = 0xf00000000ULL | (old_br1 & old_or1 & BR_BA);
-#else
-       phys0 = old_br0 & old_or0 & BR_BA;
-       phys1 = old_br1 & old_or1 & BR_BA;
-#endif
-
-        /* Save the LBC LCS0 and LCS1 addresses for the DIU mux functions */
-       lbc_lcs0_ba = map_physmem(phys0, 1, 0);
-       lbc_lcs1_ba = map_physmem(phys1, 1, 0);
-
-       pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) |
-               (0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) |
-               (2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) |
-               (8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) |
-               (8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT));
-
-       temp = in_8(&pixis->brdcfg1);
-
-       if (strncmp(port, "lvds", 4) == 0) {
-               /* Single link LVDS */
-               temp &= ~PX_BRDCFG1_DVIEN;
-               /*
-                * LVDS also needs backlight enabled, otherwise the display
-                * will be blank.
-                */
-               temp |= (PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT);
-               name = "Single-Link LVDS";
-       } else {        /* DVI */
-               /* Enable the DVI port, disable the DFP and the backlight */
-               temp &= ~(PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT);
-               temp |= PX_BRDCFG1_DVIEN;
-               name = "DVI";
-       }
-
-       printf("DIU:   Switching to %s monitor @ %ux%u\n", name, xres, yres);
-       out_8(&pixis->brdcfg1, temp);
-
-       /*
-        * Enable PIXIS indirect access mode.  This is a hack that allows us to
-        * access PIXIS registers even when the LBC pins have been muxed to the
-        * DIU.
-        */
-       setbits_8(&pixis->csr, PX_CTL_ALTACC);
-
-       /*
-        * Route the LAD pins to the DIU.  This will disable access to the eLBC,
-        * which means we won't be able to read/write any NOR flash addresses!
-        */
-       out_8(lbc_lcs0_ba, offsetof(ngpixis_t, brdcfg0));
-       px_brdcfg0 = in_8(lbc_lcs1_ba);
-       out_8(lbc_lcs1_ba, px_brdcfg0 | PX_BRDCFG0_ELBC_DIU);
-       in_8(lbc_lcs1_ba);
-
-       /* Set PMUXCR to switch the muxed pins from the LBC to the DIU */
-       clrsetbits_be32(&gur->pmuxcr, PMUXCR_ELBCDIU_MASK, PMUXCR_ELBCDIU_DIU);
-       pmuxcr = in_be32(&gur->pmuxcr);
-
-       return fsl_diu_init(xres, yres, pixel_format, 0);
-}
-
-/*
- * set_mux_to_lbc - disable the DIU so that we can read/write to elbc
- *
- * On the Freescale P1022, the DIU video signal and the LBC address/data lines
- * share the same pins, which means that when the DIU is active (e.g. the
- * console is on the DVI display), NOR flash cannot be accessed.  So we use the
- * weak accessor feature of the CFI flash code to temporarily switch the pin
- * mux from DIU to LBC whenever we want to read or write flash.  This has a
- * significant performance penalty, but it's the only way to make it work.
- *
- * There are two muxes: one on the chip, and one on the board. The chip mux
- * controls whether the pins are used for the DIU or the LBC, and it is
- * set via PMUXCR.  The board mux controls whether those signals go to
- * the video connector or the NOR flash chips, and it is set via the ngPIXIS.
- */
-static int set_mux_to_lbc(void)
-{
-       ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-       /* Switch the muxes only if they're currently set to DIU mode */
-       if ((in_be32(&gur->pmuxcr) & PMUXCR_ELBCDIU_MASK) !=
-           PMUXCR_ELBCDIU_NOR16) {
-               /*
-                * In DIU mode, the PIXIS can only be accessed indirectly
-                * since we can't read/write the LBC directly.
-                */
-               /* Set the board mux to LBC.  This will disable the display. */
-               out_8(lbc_lcs0_ba, offsetof(ngpixis_t, brdcfg0));
-               out_8(lbc_lcs1_ba, px_brdcfg0);
-               in_8(lbc_lcs1_ba);
-
-               /* Disable indirect PIXIS mode */
-               out_8(lbc_lcs0_ba, offsetof(ngpixis_t, csr));
-               clrbits_8(lbc_lcs1_ba, PX_CTL_ALTACC);
-
-               /* Set the chip mux to LBC mode, so that writes go to flash. */
-               out_be32(&gur->pmuxcr, (pmuxcr & ~PMUXCR_ELBCDIU_MASK) |
-                        PMUXCR_ELBCDIU_NOR16);
-               in_be32(&gur->pmuxcr);
-
-               /* Restore the BR0 and BR1 settings */
-               set_lbc_br(0, old_br0);
-               set_lbc_or(0, old_or0);
-               set_lbc_br(1, old_br1);
-               set_lbc_or(1, old_or1);
-
-               return 1;
-       }
-
-       return 0;
-}
-
-/*
- * set_mux_to_diu - re-enable the DIU muxing
- *
- * This function restores the chip and board muxing to point to the DIU.
- */
-static void set_mux_to_diu(void)
-{
-       ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-       /* Set BR0 and BR1 to GPCM mode */
-       set_lbc_br(0, new_br0);
-       set_lbc_or(0, new_or0);
-       set_lbc_br(1, new_br1);
-       set_lbc_or(1, new_or1);
-
-       /* Enable indirect PIXIS mode */
-       setbits_8(&pixis->csr, PX_CTL_ALTACC);
-
-       /* Set the board mux to DIU.  This will enable the display. */
-       out_8(lbc_lcs0_ba, offsetof(ngpixis_t, brdcfg0));
-       out_8(lbc_lcs1_ba, px_brdcfg0 | PX_BRDCFG0_ELBC_DIU);
-       in_8(lbc_lcs1_ba);
-
-       /* Set the chip mux to DIU mode. */
-       out_be32(&gur->pmuxcr, pmuxcr);
-       in_be32(&gur->pmuxcr);
-}
-
-/*
- * pixis_read - board-specific function to read from the PIXIS
- *
- * This function overrides the generic pixis_read() function, so that it can
- * use PIXIS indirect mode if necessary.
- */
-u8 pixis_read(unsigned int reg)
-{
-       ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-       /* Use indirect mode if the mux is currently set to DIU mode */
-       if ((in_be32(&gur->pmuxcr) & PMUXCR_ELBCDIU_MASK) !=
-           PMUXCR_ELBCDIU_NOR16) {
-               out_8(lbc_lcs0_ba, reg);
-               return in_8(lbc_lcs1_ba);
-       } else {
-               void *p = (void *)PIXIS_BASE;
-
-               return in_8(p + reg);
-       }
-}
-
-/*
- * pixis_write - board-specific function to write to the PIXIS
- *
- * This function overrides the generic pixis_write() function, so that it can
- * use PIXIS indirect mode if necessary.
- */
-void pixis_write(unsigned int reg, u8 value)
-{
-       ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-       /* Use indirect mode if the mux is currently set to DIU mode */
-       if ((in_be32(&gur->pmuxcr) & PMUXCR_ELBCDIU_MASK) !=
-           PMUXCR_ELBCDIU_NOR16) {
-               out_8(lbc_lcs0_ba, reg);
-               out_8(lbc_lcs1_ba, value);
-               /* Do a read-back to ensure the write completed */
-               in_8(lbc_lcs1_ba);
-       } else {
-               void *p = (void *)PIXIS_BASE;
-
-               out_8(p + reg, value);
-       }
-}
-
-void pixis_bank_reset(void)
-{
-       /*
-        * For some reason, a PIXIS bank reset does not work if the PIXIS is
-        * in indirect mode, so switch to direct mode first.
-        */
-       set_mux_to_lbc();
-
-       out_8(&pixis->vctl, 0);
-       out_8(&pixis->vctl, 1);
-
-       while (1);
-}
-
-#ifdef CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
-
-void flash_write8(u8 value, void *addr)
-{
-       int sw = set_mux_to_lbc();
-
-       __raw_writeb(value, addr);
-       if (sw) {
-               /*
-                * To ensure the post-write is completed to eLBC, software must
-                * perform a dummy read from one valid address from eLBC space
-                * before changing the eLBC_DIU from NOR mode to DIU mode.
-                * set_mux_to_diu() includes a sync that will ensure the
-                * __raw_readb() completes before it switches the mux.
-                */
-               __raw_readb(addr);
-               set_mux_to_diu();
-       }
-}
-
-void flash_write16(u16 value, void *addr)
-{
-       int sw = set_mux_to_lbc();
-
-       __raw_writew(value, addr);
-       if (sw) {
-               /*
-                * To ensure the post-write is completed to eLBC, software must
-                * perform a dummy read from one valid address from eLBC space
-                * before changing the eLBC_DIU from NOR mode to DIU mode.
-                * set_mux_to_diu() includes a sync that will ensure the
-                * __raw_readb() completes before it switches the mux.
-                */
-               __raw_readb(addr);
-               set_mux_to_diu();
-       }
-}
-
-void flash_write32(u32 value, void *addr)
-{
-       int sw = set_mux_to_lbc();
-
-       __raw_writel(value, addr);
-       if (sw) {
-               /*
-                * To ensure the post-write is completed to eLBC, software must
-                * perform a dummy read from one valid address from eLBC space
-                * before changing the eLBC_DIU from NOR mode to DIU mode.
-                * set_mux_to_diu() includes a sync that will ensure the
-                * __raw_readb() completes before it switches the mux.
-                */
-               __raw_readb(addr);
-               set_mux_to_diu();
-       }
-}
-
-void flash_write64(u64 value, void *addr)
-{
-       int sw = set_mux_to_lbc();
-       uint32_t *p = addr;
-
-       /*
-        * There is no __raw_writeq(), so do the write manually.  We don't trust
-        * the compiler, so we use inline assembly.
-        */
-       __asm__ __volatile__(
-               "stw%U0%X0 %2,%0;\n"
-               "stw%U1%X1 %3,%1;\n"
-               : "=m" (*p), "=m" (*(p + 1))
-               : "r" ((uint32_t) (value >> 32)), "r" ((uint32_t) (value)));
-
-       if (sw) {
-               /*
-                * To ensure the post-write is completed to eLBC, software must
-                * perform a dummy read from one valid address from eLBC space
-                * before changing the eLBC_DIU from NOR mode to DIU mode.  We
-                * read addr+4 because we just wrote to addr+4, so that's how we
-                * maintain execution order.  set_mux_to_diu() includes a sync
-                * that will ensure the __raw_readb() completes before it
-                * switches the mux.
-                */
-               __raw_readb(addr + 4);
-               set_mux_to_diu();
-       }
-}
-
-u8 flash_read8(void *addr)
-{
-       u8 ret;
-
-       int sw = set_mux_to_lbc();
-
-       ret = __raw_readb(addr);
-       if (sw)
-               set_mux_to_diu();
-
-       return ret;
-}
-
-u16 flash_read16(void *addr)
-{
-       u16 ret;
-
-       int sw = set_mux_to_lbc();
-
-       ret = __raw_readw(addr);
-       if (sw)
-               set_mux_to_diu();
-
-       return ret;
-}
-
-u32 flash_read32(void *addr)
-{
-       u32 ret;
-
-       int sw = set_mux_to_lbc();
-
-       ret = __raw_readl(addr);
-       if (sw)
-               set_mux_to_diu();
-
-       return ret;
-}
-
-u64 flash_read64(void *addr)
-{
-       u64 ret;
-
-       int sw = set_mux_to_lbc();
-
-       /* There is no __raw_readq(), so do the read manually */
-       ret = *(volatile u64 *)addr;
-       if (sw)
-               set_mux_to_diu();
-
-       return ret;
-}
-
-#endif
diff --git a/board/freescale/p1022ds/law.c b/board/freescale/p1022ds/law.c
deleted file mode 100644 (file)
index 079095d..0000000
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010 Freescale Semiconductor, Inc.
- * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
- *          Timur Tabi <timur@freescale.com>
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-       SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-       SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
-       SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_32K, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
deleted file mode 100644 (file)
index d10160d..0000000
+++ /dev/null
@@ -1,364 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010-2012 Freescale Semiconductor, Inc.
- * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
- *          Timur Tabi <timur@freescale.com>
- */
-
-#include <common.h>
-#include <command.h>
-#include <env.h>
-#include <image.h>
-#include <init.h>
-#include <log.h>
-#include <net.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_pci.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/fsl_serdes.h>
-#include <asm/io.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <asm/fsl_law.h>
-#include <netdev.h>
-#include <i2c.h>
-#include <hwconfig.h>
-
-#include "../common/ngpixis.h"
-
-int board_early_init_f(void)
-{
-       ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-       /* Set pmuxcr to allow both i2c1 and i2c2 */
-       setbits_be32(&gur->pmuxcr, 0x1000);
-#ifdef CONFIG_SYS_RAMBOOT
-       setbits_be32(&gur->pmuxcr,
-               in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
-#endif
-
-       /* Read back the register to synchronize the write. */
-       in_be32(&gur->pmuxcr);
-
-       /* Set the pin muxing to enable ETSEC2. */
-       clrbits_be32(&gur->pmuxcr2, 0x001F8000);
-
-       /* Enable the SPI */
-       clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI);
-
-       return 0;
-}
-
-int checkboard(void)
-{
-       u8 sw;
-
-       printf("Board: P1022DS Sys ID: 0x%02x, "
-              "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
-               in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
-
-       sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
-
-       switch ((sw & PIXIS_LBMAP_MASK) >> 6) {
-       case 0:
-               printf ("vBank: %u\n", ((sw & 0x30) >> 4));
-               break;
-       case 1:
-               printf ("NAND\n");
-               break;
-       case 2:
-       case 3:
-               puts ("Promjet\n");
-               break;
-       }
-
-       return 0;
-}
-
-#define CONFIG_TFP410_I2C_ADDR 0x38
-
-/* Masks for the SSI_TDM and AUDCLK bits of the ngPIXIS BRDCFG1 register. */
-#define CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK      0x0c
-#define CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK       0x03
-
-/* Route the I2C1 pins to the SSI port instead. */
-#define CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI       0x08
-
-/* Choose the 12.288Mhz codec reference clock */
-#define CONFIG_PIXIS_BRDCFG1_AUDCLK_12         0x02
-
-/* Choose the 11.2896Mhz codec reference clock */
-#define CONFIG_PIXIS_BRDCFG1_AUDCLK_11         0x01
-
-/* Connect to USB2 */
-#define CONFIG_PIXIS_BRDCFG0_USB2              0x10
-/* Connect to TFM bus */
-#define CONFIG_PIXIS_BRDCFG1_TDM               0x0c
-/* Connect to SPI */
-#define CONFIG_PIXIS_BRDCFG0_SPI               0x80
-
-int misc_init_r(void)
-{
-       u8 temp;
-       const char *audclk;
-       size_t arglen;
-       ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-       /* For DVI, enable the TFP410 Encoder. */
-
-       temp = 0xBF;
-       if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0)
-               return -1;
-       if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x08, 1, &temp, sizeof(temp)) < 0)
-               return -1;
-       debug("DVI Encoder Read: 0x%02x\n", temp);
-
-       temp = 0x10;
-       if (i2c_write(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0)
-               return -1;
-       if (i2c_read(CONFIG_TFP410_I2C_ADDR, 0x0A, 1, &temp, sizeof(temp)) < 0)
-               return -1;
-       debug("DVI Encoder Read: 0x%02x\n",temp);
-
-       /* Enable the USB2 in PMUXCR2 and FGPA */
-       if (hwconfig("usb2")) {
-               clrsetbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_ETSECUSB_MASK,
-                       MPC85xx_PMUXCR2_USB);
-               setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_USB2);
-       }
-
-       /* tdm and audio can not enable simultaneous*/
-       if (hwconfig("tdm") && hwconfig("audclk")){
-               printf("WARNING: TDM and AUDIO can not be enabled simultaneous !\n");
-               return -1;
-       }
-
-       /* Enable the TDM in PMUXCR and FGPA */
-       if (hwconfig("tdm")) {
-               clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TDM_MASK,
-                       MPC85xx_PMUXCR_TDM);
-               setbits_8(&pixis->brdcfg1, CONFIG_PIXIS_BRDCFG1_TDM);
-               /* TDM need some configration option by SPI */
-               clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SPI_MASK,
-                       MPC85xx_PMUXCR_SPI);
-               setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_SPI);
-       }
-
-       /*
-        * Enable the reference clock for the WM8776 codec, and route the MUX
-        * pins for SSI. The default is the 12.288 MHz clock
-        */
-
-       if (hwconfig("audclk")) {
-               temp = in_8(&pixis->brdcfg1) & ~(CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK |
-                       CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK);
-               temp |= CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI;
-
-               audclk = hwconfig_arg("audclk", &arglen);
-               /* Check the first two chars only */
-               if (audclk && (strncmp(audclk, "11", 2) == 0))
-                       temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_11;
-               else
-                       temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_12;
-               setbits_8(&pixis->brdcfg1, temp);
-       }
-
-       return 0;
-}
-
-/*
- * A list of PCI and SATA slots
- */
-enum slot_id {
-       SLOT_PCIE1 = 1,
-       SLOT_PCIE2,
-       SLOT_PCIE3,
-       SLOT_PCIE4,
-       SLOT_PCIE5,
-       SLOT_SATA1,
-       SLOT_SATA2
-};
-
-/*
- * This array maps the slot identifiers to their names on the P1022DS board.
- */
-static const char *slot_names[] = {
-       [SLOT_PCIE1] = "Slot 1",
-       [SLOT_PCIE2] = "Slot 2",
-       [SLOT_PCIE3] = "Slot 3",
-       [SLOT_PCIE4] = "Slot 4",
-       [SLOT_PCIE5] = "Mini-PCIe",
-       [SLOT_SATA1] = "SATA 1",
-       [SLOT_SATA2] = "SATA 2",
-};
-
-/*
- * This array maps a given SERDES configuration and SERDES device to the PCI or
- * SATA slot that it connects to.  This mapping is hard-coded in the FPGA.
- */
-static u8 serdes_dev_slot[][SATA2 + 1] = {
-       [0x01] = { [PCIE3] = SLOT_PCIE4, [PCIE2] = SLOT_PCIE5 },
-       [0x02] = { [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
-       [0x09] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE4,
-                  [PCIE2] = SLOT_PCIE5 },
-       [0x16] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
-                  [PCIE2] = SLOT_PCIE3,
-                  [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
-       [0x17] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE2,
-                  [PCIE2] = SLOT_PCIE3 },
-       [0x1a] = { [PCIE1] = SLOT_PCIE1, [PCIE2] = SLOT_PCIE3,
-                  [PCIE2] = SLOT_PCIE3,
-                  [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
-       [0x1c] = { [PCIE1] = SLOT_PCIE1,
-                  [SATA1] = SLOT_SATA1, [SATA2] = SLOT_SATA2 },
-       [0x1e] = { [PCIE1] = SLOT_PCIE1, [PCIE3] = SLOT_PCIE3 },
-       [0x1f] = { [PCIE1] = SLOT_PCIE1 },
-};
-
-
-/*
- * Returns the name of the slot to which the PCIe or SATA controller is
- * connected
- */
-const char *board_serdes_name(enum srds_prtcl device)
-{
-       ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-       u32 pordevsr = in_be32(&gur->pordevsr);
-       unsigned int srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
-                               MPC85xx_PORDEVSR_IO_SEL_SHIFT;
-       enum slot_id slot = serdes_dev_slot[srds_cfg][device];
-       const char *name = slot_names[slot];
-
-       if (name)
-               return name;
-       else
-               return "Nothing";
-}
-
-#ifdef CONFIG_PCI
-void pci_init_board(void)
-{
-       fsl_pcie_init_board(0);
-}
-#endif
-
-int board_early_init_r(void)
-{
-       const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-       int flash_esel = find_tlb_idx((void *)flashbase, 1);
-
-       /*
-        * Remap Boot flash + PROMJET region to caching-inhibited
-        * so that flash can be erased properly.
-        */
-
-       /* Flush d-cache and invalidate i-cache of any FLASH data */
-       flush_dcache();
-       invalidate_icache();
-
-       if (flash_esel == -1) {
-               /* very unlikely unless something is messed up */
-               puts("Error: Could not find TLB for FLASH BASE\n");
-               flash_esel = 2; /* give our best effort to continue */
-       } else {
-               /* invalidate existing TLB entry for flash + promjet */
-               disable_tlb(flash_esel);
-       }
-
-       set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-                       0, flash_esel, BOOKE_PAGESZ_256M, 1);
-
-       return 0;
-}
-
-/*
- * Initialize on-board and/or PCI Ethernet devices
- *
- * Returns:
- *      <0, error
- *       0, no ethernet devices found
- *      >0, number of ethernet devices initialized
- */
-int board_eth_init(bd_t *bis)
-{
-       struct fsl_pq_mdio_info mdio_info;
-       struct tsec_info_struct tsec_info[2];
-       unsigned int num = 0;
-
-#ifdef CONFIG_TSEC1
-       SET_STD_TSEC_INFO(tsec_info[num], 1);
-       num++;
-#endif
-#ifdef CONFIG_TSEC2
-       SET_STD_TSEC_INFO(tsec_info[num], 2);
-       num++;
-#endif
-
-       mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
-       mdio_info.name = DEFAULT_MII_NAME;
-       fsl_pq_mdio_init(bis, &mdio_info);
-
-       return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis);
-}
-
-#ifdef CONFIG_OF_BOARD_SETUP
-/**
- * ft_codec_setup - fix up the clock-frequency property of the codec node
- *
- * Update the clock-frequency property based on the value of the 'audclk'
- * hwconfig option.  If audclk is not specified, then don't write anything
- * to the device tree, because it means that the codec clock is disabled.
- */
-static void ft_codec_setup(void *blob, const char *compatible)
-{
-       const char *audclk;
-       size_t arglen;
-       u32 freq;
-
-       audclk = hwconfig_arg("audclk", &arglen);
-       if (audclk) {
-               if (strncmp(audclk, "11", 2) == 0)
-                       freq = 11289600;
-               else
-                       freq = 12288000;
-
-               do_fixup_by_compat_u32(blob, compatible, "clock-frequency",
-                                      freq, 1);
-       }
-}
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-       phys_addr_t base;
-       phys_size_t size;
-
-       ft_cpu_setup(blob, bd);
-
-       base = env_get_bootm_low();
-       size = env_get_bootm_size();
-
-       fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#ifdef CONFIG_HAS_FSL_DR_USB
-       fsl_fdt_fixup_dr_usb(blob, bd);
-#endif
-
-       FT_FSL_PCI_SETUP;
-
-#ifdef CONFIG_FSL_SGMII_RISER
-       fsl_sgmii_riser_fdt_fixup(blob);
-#endif
-
-       /* Update the WM8776 node's clock frequency property */
-       ft_codec_setup(blob, "wlf,wm8776");
-
-       return 0;
-}
-#endif
diff --git a/board/freescale/p1022ds/spl.c b/board/freescale/p1022ds/spl.c
deleted file mode 100644 (file)
index 39e1bee..0000000
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <console.h>
-#include <env.h>
-#include <env_internal.h>
-#include <init.h>
-#include <ns16550.h>
-#include <malloc.h>
-#include <mmc.h>
-#include <nand.h>
-#include <i2c.h>
-#include "../common/ngpixis.h"
-#include <fsl_esdhc.h>
-#include <spi_flash.h>
-#include "../common/spl.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static const u32 sysclk_tbl[] = {
-       66666000, 7499900, 83332500, 8999900,
-       99999000, 11111000, 12499800, 13333200
-};
-
-phys_size_t get_effective_memsize(void)
-{
-       return CONFIG_SYS_L2_SIZE;
-}
-
-void board_init_f(ulong bootflag)
-{
-       int px_spd;
-       u32 plat_ratio, sys_clk, bus_clk;
-       ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-       console_init_f();
-
-       /* Set pmuxcr to allow both i2c1 and i2c2 */
-       setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000);
-       setbits_be32(&gur->pmuxcr,
-                    in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
-
-#ifdef CONFIG_SPL_SPI_BOOT
-       /* Enable the SPI */
-       clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI);
-#endif
-
-       /* Read back the register to synchronize the write. */
-       in_be32(&gur->pmuxcr);
-
-       /* initialize selected port with appropriate baud rate */
-       px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD));
-       sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK_MASK];
-       plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
-       bus_clk = sys_clk * plat_ratio / 2;
-
-       NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-                    bus_clk / 16 / CONFIG_BAUDRATE);
-#ifdef CONFIG_SPL_MMC_BOOT
-       puts("\nSD boot...\n");
-#elif defined(CONFIG_SPL_SPI_BOOT)
-       puts("\nSPI Flash boot...\n");
-#endif
-
-       /* copy code to RAM and jump to it - this should not return */
-       /* NOTE - code has to be copied out of NAND buffer before
-        * other blocks can be read.
-        */
-       relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-       /* Pointer is writable since we allocated a register for it */
-       gd = (gd_t *)CONFIG_SPL_GD_ADDR;
-       bd_t *bd;
-
-       memset(gd, 0, sizeof(gd_t));
-       bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
-       memset(bd, 0, sizeof(bd_t));
-       gd->bd = bd;
-       bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
-       bd->bi_memsize = CONFIG_SYS_L2_SIZE;
-
-       arch_cpu_init();
-       get_clocks();
-       mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
-                       CONFIG_SPL_RELOC_MALLOC_SIZE);
-       gd->flags |= GD_FLG_FULL_MALLOC_INIT;
-#ifndef CONFIG_SPL_NAND_BOOT
-       env_init();
-#endif
-#ifdef CONFIG_SPL_MMC_BOOT
-       mmc_initialize(bd);
-#endif
-       /* relocate environment function pointers etc. */
-#ifdef CONFIG_SPL_NAND_BOOT
-       nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-                           (uchar *)SPL_ENV_ADDR);
-
-       gd->env_addr  = (ulong)(SPL_ENV_ADDR);
-       gd->env_valid = ENV_VALID;
-#else
-       env_relocate();
-#endif
-
-#ifdef CONFIG_SYS_I2C
-       i2c_init_all();
-#else
-       i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
-
-       dram_init();
-#ifdef CONFIG_SPL_NAND_BOOT
-       puts("Tertiary program loader running in sram...");
-#else
-       puts("Second program loader running in sram...\n");
-#endif
-
-#ifdef CONFIG_SPL_MMC_BOOT
-       mmc_boot();
-#elif defined(CONFIG_SPL_SPI_BOOT)
-       fsl_spi_boot();
-#elif defined(CONFIG_SPL_NAND_BOOT)
-       nand_boot();
-#endif
-}
diff --git a/board/freescale/p1022ds/spl_minimal.c b/board/freescale/p1022ds/spl_minimal.c
deleted file mode 100644 (file)
index 31de263..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <init.h>
-#include <ns16550.h>
-#include <asm/io.h>
-#include <nand.h>
-#include <asm/fsl_law.h>
-#include <fsl_ddr_sdram.h>
-
-
-const static u32 sysclk_tbl[] = {
-       66666000, 7499900, 83332500, 8999900,
-       99999000, 11111000, 12499800, 13333200
-};
-
-void board_init_f(ulong bootflag)
-{
-       int px_spd;
-       u32 plat_ratio, sys_clk, bus_clk;
-       ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM)
-       set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
-       set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
-#endif
-       /* for FPGA */
-       set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
-       set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
-
-       /* initialize selected port with appropriate baud rate */
-       px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD));
-       sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK_MASK];
-       plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
-       bus_clk = sys_clk * plat_ratio / 2;
-
-       NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-                       bus_clk / 16 / CONFIG_BAUDRATE);
-
-       puts("\nNAND boot... ");
-
-       /* copy code to RAM and jump to it - this should not return */
-       /* NOTE - code has to be copied out of NAND buffer before
-        * other blocks can be read.
-        */
-       relocate_code(CONFIG_SPL_RELOC_STACK, 0,
-                       CONFIG_SPL_RELOC_TEXT_BASE);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-       puts("\nSecond program loader running in sram...");
-       nand_boot();
-}
-
-void putc(char c)
-{
-       if (c == '\n')
-               NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
-
-       NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
-}
-
-void puts(const char *str)
-{
-       while (*str)
-               putc(*str++);
-}
diff --git a/board/freescale/p1022ds/tlb.c b/board/freescale/p1022ds/tlb.c
deleted file mode 100644 (file)
index 194fbd5..0000000
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2010 Freescale Semiconductor, Inc.
- * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
- *          Timur Tabi <timur@freescale.com>
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-       /* TLB 0 - for temp stack in cache */
-       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
-                     MAS3_SX|MAS3_SW|MAS3_SR, 0,
-                     0, 0, BOOKE_PAGESZ_4K, 0),
-       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
-                     CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
-                     MAS3_SX|MAS3_SW|MAS3_SR, 0,
-                     0, 0, BOOKE_PAGESZ_4K, 0),
-       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
-                     CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
-                     MAS3_SX|MAS3_SW|MAS3_SR, 0,
-                     0, 0, BOOKE_PAGESZ_4K, 0),
-       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
-                     CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
-                     MAS3_SX|MAS3_SW|MAS3_SR, 0,
-                     0, 0, BOOKE_PAGESZ_4K, 0),
-
-       /* TLB 1 */
-       /* *I*** - Covers boot page */
-       SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
-                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I,
-                     0, 0, BOOKE_PAGESZ_4K, 1),
-
-       /* *I*G* - CCSRBAR */
-       SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-                     0, 1, BOOKE_PAGESZ_1M, 1),
-
-#ifndef CONFIG_SPL_BUILD
-       /* W**G* - Flash/promjet, localbus */
-       /* This will be changed to *I*G* after relocation to RAM. */
-       SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
-                     MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
-                     0, 2, BOOKE_PAGESZ_256M, 1),
-
-       /* *I*G* - PCI */
-       SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS,
-                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-                     0, 3, BOOKE_PAGESZ_1G, 1),
-
-       /* *I*G* - PCI */
-       SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000,
-                     CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000,
-                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-                     0, 4, BOOKE_PAGESZ_256M, 1),
-
-       SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000,
-                     CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000,
-                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-                     0, 5, BOOKE_PAGESZ_256M, 1),
-
-       /* *I*G* - PCI I/O */
-       SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS,
-                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-                     0, 6, BOOKE_PAGESZ_256K, 1),
-#endif
-
-       SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS,
-                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-                     0, 7, BOOKE_PAGESZ_4K, 1),
-
-#if defined(CONFIG_SYS_RAMBOOT) || \
-       (defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR))
-       /* **** - eSDHC/eSPI/NAND boot */
-       SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
-                     0, 8, BOOKE_PAGESZ_1G, 1),
-       /* **** - eSDHC/eSPI/NAND boot - second 1GB of memory */
-       SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
-                     CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
-                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
-                     0, 9, BOOKE_PAGESZ_1G, 1),
-#endif
-
-#ifdef CONFIG_SYS_NAND_BASE
-       /* *I*G - NAND */
-       SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
-                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-                     0, 10, BOOKE_PAGESZ_16K, 1),
-#endif
-
-#ifdef CONFIG_SYS_INIT_L2_ADDR
-       /* *I*G - L2SRAM */
-       SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
-                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
-                     0, 11, BOOKE_PAGESZ_256K, 1)
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/configs/P1022DS_36BIT_NAND_defconfig b/configs/P1022DS_36BIT_NAND_defconfig
deleted file mode 100644 (file)
index 2bfda3e..0000000
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_ENV_SIZE=0x40000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFF800000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1022DS=y
-CONFIG_PHYS_64BIT=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_TPL=y
-CONFIG_TPL_ENV_SUPPORT=y
-CONFIG_TPL_I2C_SUPPORT=y
-CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_TPL_NAND_SUPPORT=y
-CONFIG_TPL_SERIAL_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_REGINFO=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1022DS_36BIT_SDCARD_defconfig b/configs/P1022DS_36BIT_SDCARD_defconfig
deleted file mode 100644 (file)
index 9cc2140..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xf8f81000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1022DS=y
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_REGINFO=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1022DS_36BIT_SPIFLASH_defconfig b/configs/P1022DS_36BIT_SPIFLASH_defconfig
deleted file mode 100644 (file)
index 80d3a88..0000000
+++ /dev/null
@@ -1,76 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_SPL_TEXT_BASE=0xf8f81000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1022DS=y
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_SPI_BOOT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_REGINFO=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1022DS_36BIT_defconfig b/configs/P1022DS_36BIT_defconfig
deleted file mode 100644 (file)
index 1048b53..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1022DS=y
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_REGINFO=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)"
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1022DS_NAND_defconfig b/configs/P1022DS_NAND_defconfig
deleted file mode 100644 (file)
index 7975487..0000000
+++ /dev/null
@@ -1,79 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_ENV_SIZE=0x40000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xFF800000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1022DS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_TPL=y
-CONFIG_TPL_ENV_SUPPORT=y
-CONFIG_TPL_I2C_SUPPORT=y
-CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_TPL_NAND_SUPPORT=y
-CONFIG_TPL_SERIAL_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_REGINFO=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=e8000000.nor"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=e8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1022DS_SDCARD_defconfig b/configs/P1022DS_SDCARD_defconfig
deleted file mode 100644 (file)
index 4e80b88..0000000
+++ /dev/null
@@ -1,73 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0xf8f81000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1022DS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_REGINFO=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=e8000000.nor"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=e8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1022DS_SPIFLASH_defconfig b/configs/P1022DS_SPIFLASH_defconfig
deleted file mode 100644 (file)
index e55f05c..0000000
+++ /dev/null
@@ -1,75 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_SPL_TEXT_BASE=0xf8f81000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1022DS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_SPI_BOOT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_REGINFO=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=e8000000.nor"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=e8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1022DS_defconfig b/configs/P1022DS_defconfig
deleted file mode 100644 (file)
index c611ce4..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_P1022DS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_REGINFO=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=e8000000.nor"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=e8000000.nor:48m(ramdisk),14m(diagnostic),2m(dink),6m(kernel),58112k(fs),512k(dtb),768k(u-boot)"
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
deleted file mode 100644 (file)
index 2b76107..0000000
+++ /dev/null
@@ -1,593 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2010-2012 Freescale Semiconductor, Inc.
- * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
- *          Timur Tabi <timur@freescale.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/stringify.h>
-
-#include "../board/freescale/common/ics307_clk.h"
-
-#ifdef CONFIG_SDCARD
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_PAD_TO              0x20000
-#define CONFIG_SPL_MAX_SIZE            (128 * 1024)
-#define CONFIG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
-#define CONFIG_SYS_MMC_U_BOOT_DST      (0x11000000)
-#define CONFIG_SYS_MMC_U_BOOT_START    (0x11000000)
-#define CONFIG_SYS_MMC_U_BOOT_OFFS     (128 << 10)
-#define CONFIG_SYS_MPC85XX_NO_RESETVEC
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_COMMON_INIT_DDR
-#endif
-#endif
-
-#ifdef CONFIG_SPIFLASH
-#define CONFIG_SPL_SPI_FLASH_MINIMAL
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_PAD_TO              0x20000
-#define CONFIG_SPL_MAX_SIZE            (128 * 1024)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE       (768 << 10)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST                (0x11000000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_START      (0x11000000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS       (128 << 10)
-#define CONFIG_SYS_MPC85XX_NO_RESETVEC
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_COMMON_INIT_DDR
-#endif
-#endif
-
-#define CONFIG_NAND_FSL_ELBC
-#define CONFIG_SYS_NAND_MAX_ECCPOS     56
-#define CONFIG_SYS_NAND_MAX_OOBFREE    5
-
-#ifdef CONFIG_MTD_RAW_NAND
-#ifdef CONFIG_TPL_BUILD
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_NAND_INIT
-#define CONFIG_SPL_COMMON_INIT_DDR
-#define CONFIG_SPL_MAX_SIZE            (128 << 10)
-#define CONFIG_TPL_TEXT_BASE           0xf8f81000
-#define CONFIG_SYS_MPC85XX_NO_RESETVEC
-#define CONFIG_SYS_NAND_U_BOOT_SIZE    (832 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST     (0x11000000)
-#define CONFIG_SYS_NAND_U_BOOT_START   (0x11000000)
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    ((128 + 128) << 10)
-#elif defined(CONFIG_SPL_BUILD)
-#define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_MAX_SIZE            4096
-#define CONFIG_SYS_NAND_U_BOOT_SIZE    (128 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST     0xf8f80000
-#define CONFIG_SYS_NAND_U_BOOT_START   0xf8f80000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    (128 << 10)
-#endif
-#define CONFIG_SPL_PAD_TO              0x20000
-#define CONFIG_TPL_PAD_TO              0x20000
-#define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#endif
-
-/* High Level Configuration Options */
-
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS    0xeffffffc
-#endif
-
-#define CONFIG_PCIE1                   /* PCIE controller 1 (slot 1) */
-#define CONFIG_PCIE2                   /* PCIE controller 2 (slot 2) */
-#define CONFIG_PCIE3                   /* PCIE controller 3 (ULI bridge) */
-#define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
-#define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
-
-#define CONFIG_ENABLE_36BIT_PHYS
-
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_ADDR_MAP
-#define CONFIG_SYS_NUM_ADDR_MAP                16      /* number of TLB1 entries */
-#endif
-
-#define CONFIG_SYS_CLK_FREQ    get_board_sys_clk()
-#define CONFIG_DDR_CLK_FREQ    get_board_ddr_clk()
-#define CONFIG_ICS307_REFCLK_HZ        33333000  /* ICS307 clock chip ref freq */
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE
-#define CONFIG_BTB
-
-#define CONFIG_SYS_CCSRBAR             0xffe00000
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
-
-/* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
-       SPL code*/
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#endif
-
-/* DDR Setup */
-#define CONFIG_DDR_SPD
-#define CONFIG_VERY_BIG_RAM
-
-#ifdef CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
-#define CONFIG_MEM_INIT_VALUE          0xdeadbeef
-#endif
-
-#define CONFIG_SYS_DDR_SDRAM_BASE      0x00000000
-#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR     1
-#define CONFIG_CHIP_SELECTS_PER_CTRL   (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-
-/* I2C addresses of SPD EEPROMs */
-#define CONFIG_SYS_SPD_BUS_NUM         1
-#define SPD_EEPROM_ADDRESS             0x51    /* CTLR 0 DIMM 0 */
-
-/* These are used when DDR doesn't use SPD.  */
-#define CONFIG_SYS_SDRAM_SIZE          2048
-#define CONFIG_SYS_SDRAM_SIZE_LAW      LAW_SIZE_2G
-#define CONFIG_SYS_DDR_CS0_BNDS                0x0000003F
-#define CONFIG_SYS_DDR_CS0_CONFIG      0x80014202
-#define CONFIG_SYS_DDR_CS1_BNDS                0x0040007F
-#define CONFIG_SYS_DDR_CS1_CONFIG      0x80014202
-#define CONFIG_SYS_DDR_TIMING_3                0x00010000
-#define CONFIG_SYS_DDR_TIMING_0                0x40110104
-#define CONFIG_SYS_DDR_TIMING_1                0x5c5bd746
-#define CONFIG_SYS_DDR_TIMING_2                0x0fa8d4ca
-#define CONFIG_SYS_DDR_MODE_1          0x00441221
-#define CONFIG_SYS_DDR_MODE_2          0x00000000
-#define CONFIG_SYS_DDR_INTERVAL                0x0a280100
-#define CONFIG_SYS_DDR_DATA_INIT       0xdeadbeef
-#define CONFIG_SYS_DDR_CLK_CTRL                0x02800000
-#define CONFIG_SYS_DDR_CONTROL         0xc7000008
-#define CONFIG_SYS_DDR_CONTROL_2       0x24401041
-#define        CONFIG_SYS_DDR_TIMING_4         0x00220001
-#define        CONFIG_SYS_DDR_TIMING_5         0x02401400
-#define        CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
-#define CONFIG_SYS_DDR_WRLVL_CONTROL   0x8675f608
-
-/*
- * Memory map
- *
- * 0x0000_0000 0x7fff_ffff     DDR                     2G Cacheable
- * 0x8000_0000 0xdfff_ffff     PCI Express Mem         1.5G non-cacheable
- * 0xffc0_0000 0xffc2_ffff     PCI IO range            192K non-cacheable
- *
- * Localbus cacheable (TBD)
- * 0xXXXX_XXXX 0xXXXX_XXXX     SRAM                    YZ M Cacheable
- *
- * Localbus non-cacheable
- * 0xe000_0000 0xe80f_ffff     Promjet/free            128M non-cacheable
- * 0xe800_0000 0xefff_ffff     FLASH                   128M non-cacheable
- * 0xff80_0000 0xff80_7fff     NAND                    32K non-cacheable
- * 0xffdf_0000 0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
- * 0xffd0_0000 0xffd0_3fff     L1 for stack            16K Cacheable TLB0
- * 0xffe0_0000 0xffef_ffff     CCSR                    1M non-cacheable
- */
-
-/*
- * Local Bus Definitions
- */
-#define CONFIG_SYS_FLASH_BASE          0xe8000000 /* start of FLASH 128M */
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_FLASH_BASE_PHYS     0xfe8000000ull
-#else
-#define CONFIG_SYS_FLASH_BASE_PHYS     CONFIG_SYS_FLASH_BASE
-#endif
-
-#define CONFIG_FLASH_BR_PRELIM  \
-       (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
-#define CONFIG_FLASH_OR_PRELIM (OR_AM_128MB | 0xff7)
-
-#ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_BR1_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
-#define CONFIG_SYS_OR1_PRELIM  CONFIG_FLASH_OR_PRELIM  /* NOR Options */
-#else
-#define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
-#define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM  /* NOR Options */
-#endif
-
-#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE_PHYS}
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS     45 /* count down from 45/5: 9..1 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
-#define CONFIG_SYS_MAX_FLASH_SECT      1024
-
-#ifndef CONFIG_SYS_MONITOR_BASE
-#ifdef CONFIG_TPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE                CONFIG_TPL_TEXT_BASE
-#elif defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_MONITOR_BASE                CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE    /* start of monitor */
-#endif
-#endif
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* Nand Flash */
-#if defined(CONFIG_NAND_FSL_ELBC)
-#define CONFIG_SYS_NAND_BASE           0xff800000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_NAND_BASE_PHYS      0xfff800000ull
-#else
-#define CONFIG_SYS_NAND_BASE_PHYS      CONFIG_SYS_NAND_BASE
-#endif
-
-#define CONFIG_SYS_NAND_BASE_LIST      {CONFIG_SYS_NAND_BASE}
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BLOCK_SIZE     (256 * 1024)
-#define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE
-
-/* NAND flash config */
-#define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
-                              | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
-                              | BR_PS_8               /* Port Size = 8 bit */ \
-                              | BR_MS_FCM             /* MSEL = FCM */ \
-                              | BR_V)                 /* valid */
-#define CONFIG_SYS_NAND_OR_PRELIM  (OR_AM_32KB        /* length 256K */ \
-                              | OR_FCM_PGS            /* Large Page*/ \
-                              | OR_FCM_CSCT \
-                              | OR_FCM_CST \
-                              | OR_FCM_CHT \
-                              | OR_FCM_SCY_1 \
-                              | OR_FCM_TRLX \
-                              | OR_FCM_EHTR)
-#ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
-#define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#else
-#define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
-#define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#endif
-
-#endif /* CONFIG_NAND_FSL_ELBC */
-
-#define CONFIG_HWCONFIG
-
-#define CONFIG_FSL_NGPIXIS
-#define PIXIS_BASE             0xffdf0000      /* PIXIS registers */
-#ifdef CONFIG_PHYS_64BIT
-#define PIXIS_BASE_PHYS                0xfffdf0000ull
-#else
-#define PIXIS_BASE_PHYS                PIXIS_BASE
-#endif
-
-#define CONFIG_SYS_BR2_PRELIM  (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
-#define CONFIG_SYS_OR2_PRELIM  (OR_AM_32KB | 0x6ff7)
-
-#define PIXIS_LBMAP_SWITCH     7
-#define PIXIS_LBMAP_MASK       0xF0
-#define PIXIS_LBMAP_ALTBANK    0x20
-#define PIXIS_SPD              0x07
-#define PIXIS_SPD_SYSCLK_MASK  0x07
-#define PIXIS_ELBC_SPI_MASK    0xc0
-#define PIXIS_SPI              0x80
-
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR       0xffd00000 /* Initial L1 address */
-#define CONFIG_SYS_INIT_RAM_SIZE               0x00004000 /* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET     \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN         (768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN          (10 * 1024 * 1024)
-
-/*
- * Config the L2 Cache as L2 SRAM
-*/
-#if defined(CONFIG_SPL_BUILD)
-#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
-#define CONFIG_SYS_INIT_L2_ADDR        0xf8f80000
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS   CONFIG_SYS_INIT_L2_ADDR
-#define CONFIG_SYS_L2_SIZE             (256 << 10)
-#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-#define CONFIG_SPL_RELOC_TEXT_BASE     0xf8f81000
-#define CONFIG_SPL_RELOC_STACK         (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR   (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE   (108 << 10)
-#define CONFIG_SPL_GD_ADDR             (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#ifdef CONFIG_TPL_BUILD
-#define CONFIG_SYS_INIT_L2_ADDR                0xf8f80000
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS   CONFIG_SYS_INIT_L2_ADDR
-#define CONFIG_SYS_L2_SIZE             (256 << 10)
-#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-#define CONFIG_SPL_RELOC_TEXT_BASE     0xf8f81000
-#define CONFIG_SPL_RELOC_STACK         (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR   (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE   (48 << 10)
-#define CONFIG_SPL_GD_ADDR             (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
-#else
-#define CONFIG_SYS_INIT_L2_ADDR                0xf8f80000
-#define CONFIG_SYS_INIT_L2_ADDR_PHYS   CONFIG_SYS_INIT_L2_ADDR
-#define CONFIG_SYS_L2_SIZE             (256 << 10)
-#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
-#define CONFIG_SPL_RELOC_TEXT_BASE     (CONFIG_SYS_INIT_L2_END - 0x2000)
-#define CONFIG_SPL_RELOC_STACK         ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
-#endif
-#endif
-#endif
-
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    1
-#define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
-#define CONFIG_NS16550_MIN_FUNCTIONS
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE      \
-       {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
-
-/* Video */
-
-#ifdef CONFIG_FSL_DIU_FB
-#define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_CCSRBAR + 0x10000)
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
-/*
- * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
- * disable empty flash sector detection, which is I/O-intensive.
- */
-#undef CONFIG_SYS_FLASH_EMPTY_INFO
-#endif
-
-#ifdef CONFIG_ATI
-#define VIDEO_IO_OFFSET                CONFIG_SYS_PCIE1_IO_VIRT
-#define CONFIG_BIOSEMU
-#define CONFIG_ATI_RADEON_FB
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
-#endif
-
-/* I2C */
-#ifndef CONFIG_DM_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_FSL_I2C_SPEED       400000
-#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED      400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
-#define CONFIG_SYS_I2C_NOPROBES                {{0, 0x29}}
-#endif
-#define CONFIG_SYS_I2C_FSL
-
-/*
- * I2C2 EEPROM
- */
-#define CONFIG_ID_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_BUS_NUM      1
-
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-
-/* controller 1, Slot 2, tgtid 1, Base address a000 */
-#define CONFIG_SYS_PCIE1_MEM_VIRT      0xc0000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE1_MEM_BUS       0xe0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS      0xc40000000ull
-#else
-#define CONFIG_SYS_PCIE1_MEM_BUS       0xc0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS      0xc0000000
-#endif
-#define CONFIG_SYS_PCIE1_MEM_SIZE      0x20000000      /* 512M */
-#define CONFIG_SYS_PCIE1_IO_VIRT       0xffc20000
-#define CONFIG_SYS_PCIE1_IO_BUS                0x00000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE1_IO_PHYS       0xfffc20000ull
-#else
-#define CONFIG_SYS_PCIE1_IO_PHYS       0xffc20000
-#endif
-#define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
-
-/* controller 2, direct to uli, tgtid 2, Base address 9000 */
-#define CONFIG_SYS_PCIE2_MEM_VIRT      0xa0000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE2_MEM_BUS       0xe0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS      0xc20000000ull
-#else
-#define CONFIG_SYS_PCIE2_MEM_BUS       0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS      0xa0000000
-#endif
-#define CONFIG_SYS_PCIE2_MEM_SIZE      0x20000000      /* 512M */
-#define CONFIG_SYS_PCIE2_IO_VIRT       0xffc10000
-#define CONFIG_SYS_PCIE2_IO_BUS                0x00000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE2_IO_PHYS       0xfffc10000ull
-#else
-#define CONFIG_SYS_PCIE2_IO_PHYS       0xffc10000
-#endif
-#define CONFIG_SYS_PCIE2_IO_SIZE       0x00010000      /* 64k */
-
-/* controller 3, Slot 1, tgtid 3, Base address b000 */
-#define CONFIG_SYS_PCIE3_MEM_VIRT      0x80000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE3_MEM_BUS       0xe0000000
-#define CONFIG_SYS_PCIE3_MEM_PHYS      0xc00000000ull
-#else
-#define CONFIG_SYS_PCIE3_MEM_BUS       0x80000000
-#define CONFIG_SYS_PCIE3_MEM_PHYS      0x80000000
-#endif
-#define CONFIG_SYS_PCIE3_MEM_SIZE      0x20000000      /* 512M */
-#define CONFIG_SYS_PCIE3_IO_VIRT       0xffc00000
-#define CONFIG_SYS_PCIE3_IO_BUS                0x00000000
-#ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE3_IO_PHYS       0xfffc00000ull
-#else
-#define CONFIG_SYS_PCIE3_IO_PHYS       0xffc00000
-#endif
-#define CONFIG_SYS_PCIE3_IO_SIZE       0x00010000      /* 64k */
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
-#endif
-
-/* SATA */
-#define CONFIG_FSL_SATA_V2
-
-#define CONFIG_SYS_SATA_MAX_DEVICE     2
-#define CONFIG_SATA1
-#define CONFIG_SYS_SATA1               CONFIG_SYS_MPC85xx_SATA1_ADDR
-#define CONFIG_SYS_SATA1_FLAGS         FLAGS_DMA
-#define CONFIG_SATA2
-#define CONFIG_SYS_SATA2               CONFIG_SYS_MPC85xx_SATA2_ADDR
-#define CONFIG_SYS_SATA2_FLAGS         FLAGS_DMA
-
-#ifdef CONFIG_FSL_SATA
-#define CONFIG_LBA48
-#endif
-
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#endif
-
-#ifdef CONFIG_TSEC_ENET
-
-#define CONFIG_TSECV2
-
-#define CONFIG_TSEC1           1
-#define CONFIG_TSEC1_NAME      "eTSEC1"
-#define CONFIG_TSEC2           1
-#define CONFIG_TSEC2_NAME      "eTSEC2"
-
-#define TSEC1_PHY_ADDR         1
-#define TSEC2_PHY_ADDR         2
-
-#define TSEC1_FLAGS            (TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_FLAGS            (TSEC_GIGABIT | TSEC_REDUCED)
-
-#define TSEC1_PHYIDX           0
-#define TSEC2_PHYIDX           0
-
-#define CONFIG_ETHPRIME                "eTSEC1"
-#endif
-
-/*
- * Dynamic MTD Partition support with mtdparts
- */
-
-/*
- * Environment
- */
-#if defined(CONFIG_SDCARD)
-#define CONFIG_FSL_FIXED_MMC_LOCATION
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#elif defined(CONFIG_MTD_RAW_NAND)
-#ifdef CONFIG_TPL_BUILD
-#define SPL_ENV_ADDR           (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
-#endif
-#elif defined(CONFIG_SYS_RAMBOOT)
-#define SPL_ENV_ADDR           (CONFIG_SYS_MONITOR_BASE - 0x1000)
-#endif
-
-#define CONFIG_LOADS_ECHO
-#define CONFIG_SYS_LOADS_BAUD_CHANGE
-
-/*
- * USB
- */
-#define CONFIG_HAS_FSL_DR_USB
-#ifdef CONFIG_HAS_FSL_DR_USB
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_EHCI_FSL
-#endif
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ   (64 << 20)      /* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
-
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#define CONFIG_HOSTNAME                "p1022ds"
-#define CONFIG_ROOTPATH                "/opt/nfsroot"
-#define CONFIG_BOOTFILE                "uImage"
-#define CONFIG_UBOOTPATH       u-boot.bin      /* U-Boot image on TFTP server */
-
-#define CONFIG_LOADADDR                1000000
-
-#define        CONFIG_EXTRA_ENV_SETTINGS                               \
-       "netdev=eth0\0"                                         \
-       "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
-       "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
-       "tftpflash=tftpboot $loadaddr $uboot && "               \
-               "protect off $ubootaddr +$filesize && "         \
-               "erase $ubootaddr +$filesize && "               \
-               "cp.b $loadaddr $ubootaddr $filesize && "       \
-               "protect on $ubootaddr +$filesize && "          \
-               "cmp.b $loadaddr $ubootaddr $filesize\0"        \
-       "consoledev=ttyS0\0"                                    \
-       "ramdiskaddr=2000000\0"                                 \
-       "ramdiskfile=rootfs.ext2.gz.uboot\0"                    \
-       "fdtaddr=1e00000\0"                                     \
-       "fdtfile=p1022ds.dtb\0"                                 \
-       "bdev=sda3\0"                                           \
-       "hwconfig=esdhc;audclk:12\0"
-
-#define CONFIG_HDBOOT                                  \
-       "setenv bootargs root=/dev/$bdev rw "           \
-       "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
-       "tftp $loadaddr $bootfile;"                     \
-       "tftp $fdtaddr $fdtfile;"                       \
-       "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_NFSBOOTCOMMAND                                          \
-       "setenv bootargs root=/dev/nfs rw "                             \
-       "nfsroot=$serverip:$rootpath "                                  \
-       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-       "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
-       "tftp $loadaddr $bootfile;"                                     \
-       "tftp $fdtaddr $fdtfile;"                                       \
-       "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND                                          \
-       "setenv bootargs root=/dev/ram rw "                             \
-       "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
-       "tftp $ramdiskaddr $ramdiskfile;"                               \
-       "tftp $loadaddr $bootfile;"                                     \
-       "tftp $fdtaddr $fdtfile;"                                       \
-       "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND             CONFIG_RAMBOOTCOMMAND
-
-#endif