env: Move env_set() to env.h
[oweals/u-boot.git] / net / eth-uclass.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2001-2015
4  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5  * Joe Hershberger, National Instruments
6  */
7
8 #include <common.h>
9 #include <dm.h>
10 #include <env.h>
11 #include <environment.h>
12 #include <net.h>
13 #include <dm/device-internal.h>
14 #include <dm/uclass-internal.h>
15 #include "eth_internal.h"
16
17 DECLARE_GLOBAL_DATA_PTR;
18
19 /**
20  * struct eth_device_priv - private structure for each Ethernet device
21  *
22  * @state: The state of the Ethernet MAC driver (defined by enum eth_state_t)
23  */
24 struct eth_device_priv {
25         enum eth_state_t state;
26 };
27
28 /**
29  * struct eth_uclass_priv - The structure attached to the uclass itself
30  *
31  * @current: The Ethernet device that the network functions are using
32  */
33 struct eth_uclass_priv {
34         struct udevice *current;
35 };
36
37 /* eth_errno - This stores the most recent failure code from DM functions */
38 static int eth_errno;
39
40 static struct eth_uclass_priv *eth_get_uclass_priv(void)
41 {
42         struct uclass *uc;
43
44         uclass_get(UCLASS_ETH, &uc);
45         assert(uc);
46         return uc->priv;
47 }
48
49 void eth_set_current_to_next(void)
50 {
51         struct eth_uclass_priv *uc_priv;
52
53         uc_priv = eth_get_uclass_priv();
54         if (uc_priv->current)
55                 uclass_next_device(&uc_priv->current);
56         if (!uc_priv->current)
57                 uclass_first_device(UCLASS_ETH, &uc_priv->current);
58 }
59
60 /*
61  * Typically this will simply return the active device.
62  * In the case where the most recent active device was unset, this will attempt
63  * to return the first device. If that device doesn't exist or fails to probe,
64  * this function will return NULL.
65  */
66 struct udevice *eth_get_dev(void)
67 {
68         struct eth_uclass_priv *uc_priv;
69
70         uc_priv = eth_get_uclass_priv();
71         if (!uc_priv->current)
72                 eth_errno = uclass_first_device(UCLASS_ETH,
73                                     &uc_priv->current);
74         return uc_priv->current;
75 }
76
77 /*
78  * Typically this will just store a device pointer.
79  * In case it was not probed, we will attempt to do so.
80  * dev may be NULL to unset the active device.
81  */
82 void eth_set_dev(struct udevice *dev)
83 {
84         if (dev && !device_active(dev)) {
85                 eth_errno = device_probe(dev);
86                 if (eth_errno)
87                         dev = NULL;
88         }
89
90         eth_get_uclass_priv()->current = dev;
91 }
92
93 /*
94  * Find the udevice that either has the name passed in as devname or has an
95  * alias named devname.
96  */
97 struct udevice *eth_get_dev_by_name(const char *devname)
98 {
99         int seq = -1;
100         char *endp = NULL;
101         const char *startp = NULL;
102         struct udevice *it;
103         struct uclass *uc;
104         int len = strlen("eth");
105
106         /* Must be longer than 3 to be an alias */
107         if (!strncmp(devname, "eth", len) && strlen(devname) > len) {
108                 startp = devname + len;
109                 seq = simple_strtoul(startp, &endp, 10);
110         }
111
112         uclass_get(UCLASS_ETH, &uc);
113         uclass_foreach_dev(it, uc) {
114                 /*
115                  * We need the seq to be valid, so try to probe it.
116                  * If the probe fails, the seq will not match since it will be
117                  * -1 instead of what we are looking for.
118                  * We don't care about errors from probe here. Either they won't
119                  * match an alias or it will match a literal name and we'll pick
120                  * up the error when we try to probe again in eth_set_dev().
121                  */
122                 if (device_probe(it))
123                         continue;
124                 /* Check for the name or the sequence number to match */
125                 if (strcmp(it->name, devname) == 0 ||
126                     (endp > startp && it->seq == seq))
127                         return it;
128         }
129
130         return NULL;
131 }
132
133 unsigned char *eth_get_ethaddr(void)
134 {
135         struct eth_pdata *pdata;
136
137         if (eth_get_dev()) {
138                 pdata = eth_get_dev()->platdata;
139                 return pdata->enetaddr;
140         }
141
142         return NULL;
143 }
144
145 /* Set active state without calling start on the driver */
146 int eth_init_state_only(void)
147 {
148         struct udevice *current;
149         struct eth_device_priv *priv;
150
151         current = eth_get_dev();
152         if (!current || !device_active(current))
153                 return -EINVAL;
154
155         priv = current->uclass_priv;
156         priv->state = ETH_STATE_ACTIVE;
157
158         return 0;
159 }
160
161 /* Set passive state without calling stop on the driver */
162 void eth_halt_state_only(void)
163 {
164         struct udevice *current;
165         struct eth_device_priv *priv;
166
167         current = eth_get_dev();
168         if (!current || !device_active(current))
169                 return;
170
171         priv = current->uclass_priv;
172         priv->state = ETH_STATE_PASSIVE;
173 }
174
175 int eth_get_dev_index(void)
176 {
177         if (eth_get_dev())
178                 return eth_get_dev()->seq;
179         return -1;
180 }
181
182 static int eth_write_hwaddr(struct udevice *dev)
183 {
184         struct eth_pdata *pdata;
185         int ret = 0;
186
187         if (!dev || !device_active(dev))
188                 return -EINVAL;
189
190         /* seq is valid since the device is active */
191         if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) {
192                 pdata = dev->platdata;
193                 if (!is_valid_ethaddr(pdata->enetaddr)) {
194                         printf("\nError: %s address %pM illegal value\n",
195                                dev->name, pdata->enetaddr);
196                         return -EINVAL;
197                 }
198
199                 /*
200                  * Drivers are allowed to decide not to implement this at
201                  * run-time. E.g. Some devices may use it and some may not.
202                  */
203                 ret = eth_get_ops(dev)->write_hwaddr(dev);
204                 if (ret == -ENOSYS)
205                         ret = 0;
206                 if (ret)
207                         printf("\nWarning: %s failed to set MAC address\n",
208                                dev->name);
209         }
210
211         return ret;
212 }
213
214 static int on_ethaddr(const char *name, const char *value, enum env_op op,
215         int flags)
216 {
217         int index;
218         int retval;
219         struct udevice *dev;
220
221         /* look for an index after "eth" */
222         index = simple_strtoul(name + 3, NULL, 10);
223
224         retval = uclass_find_device_by_seq(UCLASS_ETH, index, false, &dev);
225         if (!retval) {
226                 struct eth_pdata *pdata = dev->platdata;
227                 switch (op) {
228                 case env_op_create:
229                 case env_op_overwrite:
230                         eth_parse_enetaddr(value, pdata->enetaddr);
231                         eth_write_hwaddr(dev);
232                         break;
233                 case env_op_delete:
234                         memset(pdata->enetaddr, 0, ARP_HLEN);
235                 }
236         }
237
238         return 0;
239 }
240 U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr);
241
242 int eth_init(void)
243 {
244         char *ethact = env_get("ethact");
245         char *ethrotate = env_get("ethrotate");
246         struct udevice *current = NULL;
247         struct udevice *old_current;
248         int ret = -ENODEV;
249
250         /*
251          * When 'ethrotate' variable is set to 'no' and 'ethact' variable
252          * is already set to an ethernet device, we should stick to 'ethact'.
253          */
254         if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) {
255                 if (ethact) {
256                         current = eth_get_dev_by_name(ethact);
257                         if (!current)
258                                 return -EINVAL;
259                 }
260         }
261
262         if (!current) {
263                 current = eth_get_dev();
264                 if (!current) {
265                         printf("No ethernet found.\n");
266                         return -ENODEV;
267                 }
268         }
269
270         old_current = current;
271         do {
272                 if (current) {
273                         debug("Trying %s\n", current->name);
274
275                         if (device_active(current)) {
276                                 ret = eth_get_ops(current)->start(current);
277                                 if (ret >= 0) {
278                                         struct eth_device_priv *priv =
279                                                 current->uclass_priv;
280
281                                         priv->state = ETH_STATE_ACTIVE;
282                                         return 0;
283                                 }
284                         } else {
285                                 ret = eth_errno;
286                         }
287
288                         debug("FAIL\n");
289                 } else {
290                         debug("PROBE FAIL\n");
291                 }
292
293                 /*
294                  * If ethrotate is enabled, this will change "current",
295                  * otherwise we will drop out of this while loop immediately
296                  */
297                 eth_try_another(0);
298                 /* This will ensure the new "current" attempted to probe */
299                 current = eth_get_dev();
300         } while (old_current != current);
301
302         return ret;
303 }
304
305 void eth_halt(void)
306 {
307         struct udevice *current;
308         struct eth_device_priv *priv;
309
310         current = eth_get_dev();
311         if (!current || !eth_is_active(current))
312                 return;
313
314         eth_get_ops(current)->stop(current);
315         priv = current->uclass_priv;
316         if (priv)
317                 priv->state = ETH_STATE_PASSIVE;
318 }
319
320 int eth_is_active(struct udevice *dev)
321 {
322         struct eth_device_priv *priv;
323
324         if (!dev || !device_active(dev))
325                 return 0;
326
327         priv = dev_get_uclass_priv(dev);
328         return priv->state == ETH_STATE_ACTIVE;
329 }
330
331 int eth_send(void *packet, int length)
332 {
333         struct udevice *current;
334         int ret;
335
336         current = eth_get_dev();
337         if (!current)
338                 return -ENODEV;
339
340         if (!eth_is_active(current))
341                 return -EINVAL;
342
343         ret = eth_get_ops(current)->send(current, packet, length);
344         if (ret < 0) {
345                 /* We cannot completely return the error at present */
346                 debug("%s: send() returned error %d\n", __func__, ret);
347         }
348         return ret;
349 }
350
351 int eth_rx(void)
352 {
353         struct udevice *current;
354         uchar *packet;
355         int flags;
356         int ret;
357         int i;
358
359         current = eth_get_dev();
360         if (!current)
361                 return -ENODEV;
362
363         if (!eth_is_active(current))
364                 return -EINVAL;
365
366         /* Process up to 32 packets at one time */
367         flags = ETH_RECV_CHECK_DEVICE;
368         for (i = 0; i < 32; i++) {
369                 ret = eth_get_ops(current)->recv(current, flags, &packet);
370                 flags = 0;
371                 if (ret > 0)
372                         net_process_received_packet(packet, ret);
373                 if (ret >= 0 && eth_get_ops(current)->free_pkt)
374                         eth_get_ops(current)->free_pkt(current, packet, ret);
375                 if (ret <= 0)
376                         break;
377         }
378         if (ret == -EAGAIN)
379                 ret = 0;
380         if (ret < 0) {
381                 /* We cannot completely return the error at present */
382                 debug("%s: recv() returned error %d\n", __func__, ret);
383         }
384         return ret;
385 }
386
387 int eth_initialize(void)
388 {
389         int num_devices = 0;
390         struct udevice *dev;
391
392         eth_common_init();
393
394         /*
395          * Devices need to write the hwaddr even if not started so that Linux
396          * will have access to the hwaddr that u-boot stored for the device.
397          * This is accomplished by attempting to probe each device and calling
398          * their write_hwaddr() operation.
399          */
400         uclass_first_device_check(UCLASS_ETH, &dev);
401         if (!dev) {
402                 printf("No ethernet found.\n");
403                 bootstage_error(BOOTSTAGE_ID_NET_ETH_START);
404         } else {
405                 char *ethprime = env_get("ethprime");
406                 struct udevice *prime_dev = NULL;
407
408                 if (ethprime)
409                         prime_dev = eth_get_dev_by_name(ethprime);
410                 if (prime_dev) {
411                         eth_set_dev(prime_dev);
412                         eth_current_changed();
413                 } else {
414                         eth_set_dev(NULL);
415                 }
416
417                 bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT);
418                 do {
419                         if (num_devices)
420                                 printf(", ");
421
422                         printf("eth%d: %s", dev->seq, dev->name);
423
424                         if (ethprime && dev == prime_dev)
425                                 printf(" [PRIME]");
426
427                         eth_write_hwaddr(dev);
428
429                         uclass_next_device_check(&dev);
430                         num_devices++;
431                 } while (dev);
432
433                 putc('\n');
434         }
435
436         return num_devices;
437 }
438
439 static int eth_post_bind(struct udevice *dev)
440 {
441         if (strchr(dev->name, ' ')) {
442                 printf("\nError: eth device name \"%s\" has a space!\n",
443                        dev->name);
444                 return -EINVAL;
445         }
446
447         return 0;
448 }
449
450 static int eth_pre_unbind(struct udevice *dev)
451 {
452         /* Don't hang onto a pointer that is going away */
453         if (dev == eth_get_uclass_priv()->current)
454                 eth_set_dev(NULL);
455
456         return 0;
457 }
458
459 static bool eth_dev_get_mac_address(struct udevice *dev, u8 mac[ARP_HLEN])
460 {
461 #if IS_ENABLED(CONFIG_OF_CONTROL)
462         const uint8_t *p;
463
464         p = dev_read_u8_array_ptr(dev, "mac-address", ARP_HLEN);
465         if (!p)
466                 p = dev_read_u8_array_ptr(dev, "local-mac-address", ARP_HLEN);
467
468         if (!p)
469                 return false;
470
471         memcpy(mac, p, ARP_HLEN);
472
473         return true;
474 #else
475         return false;
476 #endif
477 }
478
479 static int eth_post_probe(struct udevice *dev)
480 {
481         struct eth_device_priv *priv = dev->uclass_priv;
482         struct eth_pdata *pdata = dev->platdata;
483         unsigned char env_enetaddr[ARP_HLEN];
484
485 #if defined(CONFIG_NEEDS_MANUAL_RELOC)
486         struct eth_ops *ops = eth_get_ops(dev);
487         static int reloc_done;
488
489         if (!reloc_done) {
490                 if (ops->start)
491                         ops->start += gd->reloc_off;
492                 if (ops->send)
493                         ops->send += gd->reloc_off;
494                 if (ops->recv)
495                         ops->recv += gd->reloc_off;
496                 if (ops->free_pkt)
497                         ops->free_pkt += gd->reloc_off;
498                 if (ops->stop)
499                         ops->stop += gd->reloc_off;
500                 if (ops->mcast)
501                         ops->mcast += gd->reloc_off;
502                 if (ops->write_hwaddr)
503                         ops->write_hwaddr += gd->reloc_off;
504                 if (ops->read_rom_hwaddr)
505                         ops->read_rom_hwaddr += gd->reloc_off;
506
507                 reloc_done++;
508         }
509 #endif
510
511         priv->state = ETH_STATE_INIT;
512
513         /* Check if the device has a valid MAC address in device tree */
514         if (!eth_dev_get_mac_address(dev, pdata->enetaddr) ||
515             !is_valid_ethaddr(pdata->enetaddr)) {
516                 /* Check if the device has a MAC address in ROM */
517                 if (eth_get_ops(dev)->read_rom_hwaddr)
518                         eth_get_ops(dev)->read_rom_hwaddr(dev);
519         }
520
521         eth_env_get_enetaddr_by_index("eth", dev->seq, env_enetaddr);
522         if (!is_zero_ethaddr(env_enetaddr)) {
523                 if (!is_zero_ethaddr(pdata->enetaddr) &&
524                     memcmp(pdata->enetaddr, env_enetaddr, ARP_HLEN)) {
525                         printf("\nWarning: %s MAC addresses don't match:\n",
526                                dev->name);
527                         printf("Address in ROM is          %pM\n",
528                                pdata->enetaddr);
529                         printf("Address in environment is  %pM\n",
530                                env_enetaddr);
531                 }
532
533                 /* Override the ROM MAC address */
534                 memcpy(pdata->enetaddr, env_enetaddr, ARP_HLEN);
535         } else if (is_valid_ethaddr(pdata->enetaddr)) {
536                 eth_env_set_enetaddr_by_index("eth", dev->seq, pdata->enetaddr);
537                 printf("\nWarning: %s using MAC address from ROM\n",
538                        dev->name);
539         } else if (is_zero_ethaddr(pdata->enetaddr) ||
540                    !is_valid_ethaddr(pdata->enetaddr)) {
541 #ifdef CONFIG_NET_RANDOM_ETHADDR
542                 net_random_ethaddr(pdata->enetaddr);
543                 printf("\nWarning: %s (eth%d) using random MAC address - %pM\n",
544                        dev->name, dev->seq, pdata->enetaddr);
545 #else
546                 printf("\nError: %s address not set.\n",
547                        dev->name);
548                 return -EINVAL;
549 #endif
550         }
551
552         eth_write_hwaddr(dev);
553
554         return 0;
555 }
556
557 static int eth_pre_remove(struct udevice *dev)
558 {
559         struct eth_pdata *pdata = dev->platdata;
560
561         eth_get_ops(dev)->stop(dev);
562
563         /* clear the MAC address */
564         memset(pdata->enetaddr, 0, ARP_HLEN);
565
566         return 0;
567 }
568
569 UCLASS_DRIVER(eth) = {
570         .name           = "eth",
571         .id             = UCLASS_ETH,
572         .post_bind      = eth_post_bind,
573         .pre_unbind     = eth_pre_unbind,
574         .post_probe     = eth_post_probe,
575         .pre_remove     = eth_pre_remove,
576         .priv_auto_alloc_size = sizeof(struct eth_uclass_priv),
577         .per_device_auto_alloc_size = sizeof(struct eth_device_priv),
578         .flags          = DM_UC_FLAG_SEQ_ALIAS,
579 };