1 /* SPDX-License-Identifier: GPL-2.0+ */
4 * Texas Instruments, <www.ti.com>
9 #include <binman_sym.h>
11 /* Platform-specific defines */
12 #include <linux/compiler.h>
16 /* Value in r0 indicates we booted from U-Boot */
17 #define UBOOT_NOT_LOADED_FROM_SPL 0x13578642
20 #define MMCSD_MODE_UNDEFINED 0
21 #define MMCSD_MODE_RAW 1
22 #define MMCSD_MODE_FS 2
23 #define MMCSD_MODE_EMMCBOOT 3
26 * u_boot_first_phase() - check if this is the first U-Boot phase
28 * U-Boot has up to three phases: TPL, SPL and U-Boot proper. Depending on the
29 * build flags we can determine whether the current build is for the first
30 * phase of U-Boot or not. If there is no SPL, then this is U-Boot proper. If
31 * there is SPL but no TPL, the the first phase is SPL. If there is TPL, then
32 * it is the first phase.
34 * @returns true if this is the first phase of U-Boot
37 static inline bool u_boot_first_phase(void)
39 if (IS_ENABLED(CONFIG_TPL)) {
40 if (IS_ENABLED(CONFIG_TPL_BUILD))
42 } else if (IS_ENABLED(CONFIG_SPL)) {
43 if (IS_ENABLED(CONFIG_SPL_BUILD))
53 PHASE_TPL, /* Running in TPL */
54 PHASE_SPL, /* Running in SPL */
55 PHASE_BOARD_F, /* Running in U-Boot before relocation */
56 PHASE_BOARD_R, /* Running in U-Boot after relocation */
60 * spl_phase() - Find out the phase of U-Boot
62 * This can be used to avoid #ifdef logic and use if() instead.
64 * For example, to include code only in TPL, you might do:
66 * #ifdef CONFIG_TPL_BUILD
70 * but with this you can use:
72 * if (spl_phase() == PHASE_TPL) {
76 * To include code only in SPL, you might do:
78 * #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
82 * but with this you can use:
84 * if (spl_phase() == PHASE_SPL) {
88 * To include code only in U-Boot proper, you might do:
90 * #ifndef CONFIG_SPL_BUILD
94 * but with this you can use:
96 * if (spl_phase() == PHASE_BOARD_F) {
100 * @return U-Boot phase
102 static inline enum u_boot_phase spl_phase(void)
104 #ifdef CONFIG_TPL_BUILD
106 #elif CONFIG_SPL_BUILD
109 DECLARE_GLOBAL_DATA_PTR;
111 if (!(gd->flags & GD_FLG_RELOC))
112 return PHASE_BOARD_F;
114 return PHASE_BOARD_R;
118 /* A string name for SPL or TPL */
119 #ifdef CONFIG_SPL_BUILD
120 # ifdef CONFIG_TPL_BUILD
121 # define SPL_TPL_NAME "TPL"
123 # define SPL_TPL_NAME "SPL"
125 # define SPL_TPL_PROMPT SPL_TPL_NAME ": "
127 # define SPL_TPL_NAME ""
128 # define SPL_TPL_PROMPT ""
131 struct spl_image_info {
135 uintptr_t entry_point;
136 #if CONFIG_IS_ENABLED(LOAD_FIT) || CONFIG_IS_ENABLED(LOAD_FIT_FULL)
143 #ifdef CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK
151 * Information required to load data from a device
153 * @dev: Pointer to the device, e.g. struct mmc *
154 * @priv: Private data for the device
155 * @bl_len: Block length for reading in bytes
156 * @filename: Name of the fit image file.
157 * @read: Function to call to read from the device
159 struct spl_load_info {
163 const char *filename;
164 ulong (*read)(struct spl_load_info *load, ulong sector, ulong count,
169 * We need to know the position of U-Boot in memory so we can jump to it. We
170 * allow any U-Boot binary to be used (u-boot.bin, u-boot-nodtb.bin,
171 * u-boot.img), hence the '_any'. These is no checking here that the correct
172 * image is found. For * example if u-boot.img is used we don't check that
173 * spl_parse_image_header() can parse a valid header.
175 binman_sym_extern(ulong, u_boot_any, image_pos);
178 * spl_load_simple_fit_skip_processing() - Hook to allow skipping the FIT
179 * image processing during spl_load_simple_fit().
181 * Return true to skip FIT processing, false to preserve the full code flow
182 * of spl_load_simple_fit().
184 bool spl_load_simple_fit_skip_processing(void);
187 * spl_load_simple_fit() - Loads a fit image from a device.
188 * @spl_image: Image description to set up
189 * @info: Structure containing the information required to load data.
190 * @sector: Sector number where FIT image is located in the device
191 * @fdt: Pointer to the copied FIT header.
193 * Reads the FIT image @sector in the device. Loads u-boot image to
194 * specified load address and copies the dtb to end of u-boot image.
195 * Returns 0 on success.
197 int spl_load_simple_fit(struct spl_image_info *spl_image,
198 struct spl_load_info *info, ulong sector, void *fdt);
200 #define SPL_COPY_PAYLOAD_ONLY 1
201 #define SPL_FIT_FOUND 2
203 /* SPL common functions */
204 void preloader_console_init(void);
205 u32 spl_boot_device(void);
206 u32 spl_boot_mode(const u32 boot_device);
207 int spl_boot_partition(const u32 boot_device);
208 void spl_set_bd(void);
211 * spl_set_header_raw_uboot() - Set up a standard SPL image structure
213 * This sets up the given spl_image which the standard values obtained from
214 * config options: CONFIG_SYS_MONITOR_LEN, CONFIG_SYS_UBOOT_START,
215 * CONFIG_SYS_TEXT_BASE.
217 * @spl_image: Image description to set up
219 void spl_set_header_raw_uboot(struct spl_image_info *spl_image);
222 * spl_parse_image_header() - parse the image header and set up info
224 * This parses the legacy image header information at @header and sets up
225 * @spl_image according to what is found. If no image header is found, then
226 * a raw image or bootz is assumed. If CONFIG_SPL_PANIC_ON_RAW_IMAGE is
227 * enabled, then this causes a panic. If CONFIG_SPL_RAW_IMAGE_SUPPORT is not
228 * enabled then U-Boot gives up. Otherwise U-Boot sets up the image using
229 * spl_set_header_raw_uboot(), or possibly the bootz header.
231 * @spl_image: Image description to set up
232 * @header image header to parse
233 * @return 0 if a header was correctly parsed, -ve on error
235 int spl_parse_image_header(struct spl_image_info *spl_image,
236 const struct image_header *header);
238 void spl_board_prepare_for_linux(void);
239 void spl_board_prepare_for_boot(void);
240 int spl_board_ubi_load_image(u32 boot_device);
243 * jump_to_image_linux() - Jump to a Linux kernel from SPL
245 * This jumps into a Linux kernel using the information in @spl_image.
247 * @spl_image: Image description to set up
249 void __noreturn jump_to_image_linux(struct spl_image_info *spl_image);
252 * spl_start_uboot() - Check if SPL should start the kernel or U-Boot
254 * This is called by the various SPL loaders to determine whether the board
255 * wants to load the kernel or U-Boot. This function should be provided by
258 * @return 0 if SPL should start the kernel, 1 if U-Boot must be started
260 int spl_start_uboot(void);
263 * spl_display_print() - Display a board-specific message in SPL
265 * If CONFIG_SPL_DISPLAY_PRINT is enabled, U-Boot will call this function
266 * immediately after displaying the SPL console banner ("U-Boot SPL ...").
267 * This function should be provided by the board.
269 void spl_display_print(void);
272 * struct spl_boot_device - Describes a boot device used by SPL
274 * @boot_device: A number indicating the BOOT_DEVICE type. There are various
275 * BOOT_DEVICE... #defines and enums in U-Boot and they are not consistently
277 * @boot_device_name: Named boot device, or NULL if none.
279 * Note: Additional fields can be added here, bearing in mind that SPL is
280 * size-sensitive and common fields will be present on all boards. This
281 * struct can also be used to return additional information about the load
282 * process if that becomes useful.
284 struct spl_boot_device {
286 const char *boot_device_name;
290 * Holds information about a way of loading an SPL image
292 * @name: User-friendly name for this method (e.g. "MMC")
293 * @boot_device: Boot device that this loader supports
294 * @load_image: Function to call to load image
296 struct spl_image_loader {
297 #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
302 * load_image() - Load an SPL image
304 * @spl_image: place to put image information
305 * @bootdev: describes the boot device to load from
307 int (*load_image)(struct spl_image_info *spl_image,
308 struct spl_boot_device *bootdev);
311 /* Declare an SPL image loader */
312 #define SPL_LOAD_IMAGE(__name) \
313 ll_entry_declare(struct spl_image_loader, __name, spl_image_loader)
316 * _priority is the priority of this method, 0 meaning it will be the top
317 * choice for this device, 9 meaning it is the bottom choice.
318 * _boot_device is the BOOT_DEVICE_... value
319 * _method is the load_image function to call
321 #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
322 #define SPL_LOAD_IMAGE_METHOD(_name, _priority, _boot_device, _method) \
323 SPL_LOAD_IMAGE(_method ## _priority ## _boot_device) = { \
325 .boot_device = _boot_device, \
326 .load_image = _method, \
329 #define SPL_LOAD_IMAGE_METHOD(_name, _priority, _boot_device, _method) \
330 SPL_LOAD_IMAGE(_method ## _priority ## _boot_device) = { \
331 .boot_device = _boot_device, \
332 .load_image = _method, \
336 /* SPL FAT image functions */
337 int spl_load_image_fat(struct spl_image_info *spl_image,
338 struct blk_desc *block_dev, int partition,
339 const char *filename);
340 int spl_load_image_fat_os(struct spl_image_info *spl_image,
341 struct blk_desc *block_dev, int partition);
343 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image);
345 /* SPL EXT image functions */
346 int spl_load_image_ext(struct spl_image_info *spl_image,
347 struct blk_desc *block_dev, int partition,
348 const char *filename);
349 int spl_load_image_ext_os(struct spl_image_info *spl_image,
350 struct blk_desc *block_dev, int partition);
353 * spl_early_init() - Set up device tree and driver model in SPL if enabled
355 * Call this function in board_init_f() if you want to use device tree and
356 * driver model early, before board_init_r() is called.
358 * If this is not called, then driver model will be inactive in SPL's
359 * board_init_f(), and no device tree will be available.
361 int spl_early_init(void);
364 * spl_init() - Set up device tree and driver model in SPL if enabled
366 * You can optionally call spl_early_init(), then optionally call spl_init().
367 * This function will be called from board_init_r() if not called earlier.
369 * Both spl_early_init() and spl_init() perform a similar function except that
370 * the latter will not set up the malloc() area if
371 * CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN is enabled, since it is assumed to
372 * already be done by a calll to spl_relocate_stack_gd() before board_init_r()
375 * This function will be called from board_init_r() if not called earlier.
377 * If this is not called, then driver model will be inactive in SPL's
378 * board_init_f(), and no device tree will be available.
382 #ifdef CONFIG_SPL_BOARD_INIT
383 void spl_board_init(void);
387 * spl_was_boot_source() - check if U-Boot booted from SPL
389 * This will normally be true, but if U-Boot jumps to second U-Boot, it will
390 * be false. This should be implemented by board-specific code.
392 * @return true if U-Boot booted from SPL, else false
394 bool spl_was_boot_source(void);
397 * spl_dfu_cmd- run dfu command with chosen mmc device interface
398 * @param usb_index - usb controller number
399 * @param mmc_dev - mmc device nubmer
401 * @return 0 on success, otherwise error code
403 int spl_dfu_cmd(int usbctrl, char *dfu_alt_info, char *interface, char *devstr);
405 int spl_mmc_load_image(struct spl_image_info *spl_image,
406 struct spl_boot_device *bootdev);
409 * spl_mmc_load() - Load an image file from MMC/SD media
411 * @param spl_image Image data filled in by loading process
412 * @param bootdev Describes which device to load from
413 * @param filename Name of file to load (in FS mode)
414 * @param raw_part Partition to load from (in RAW mode)
415 * @param raw_sect Sector to load from (in RAW mode)
417 * @return 0 on success, otherwise error code
419 int spl_mmc_load(struct spl_image_info *spl_image,
420 struct spl_boot_device *bootdev,
421 const char *filename,
423 unsigned long raw_sect);
426 * spl_invoke_atf - boot using an ARM trusted firmware image
428 void spl_invoke_atf(struct spl_image_info *spl_image);
431 * spl_optee_entry - entry function for optee
433 * args defind in op-tee project
434 * https://github.com/OP-TEE/optee_os/
435 * core/arch/arm/kernel/generic_entry_a32.S
437 * @arg1: (ARMv7 standard bootarg #1)
438 * @arg2: device tree address, (ARMv7 standard bootarg #2)
439 * @arg3: non-secure entry address (ARMv7 bootarg #0)
441 void spl_optee_entry(void *arg0, void *arg1, void *arg2, void *arg3);
444 * spl_invoke_opensbi - boot using a RISC-V OpenSBI image
446 void spl_invoke_opensbi(struct spl_image_info *spl_image);
449 * board_return_to_bootrom - allow for boards to continue with the boot ROM
451 * If a board (e.g. the Rockchip RK3368 boards) provide some
452 * supporting functionality for SPL in their boot ROM and the SPL
453 * stage wants to return to the ROM code to continue booting, boards
454 * can implement 'board_return_to_bootrom'.
456 void board_return_to_bootrom(void);
459 * board_spl_fit_post_load - allow process images after loading finished
462 void board_spl_fit_post_load(ulong load_addr, size_t length);
465 * board_spl_fit_size_align - specific size align before processing payload
468 ulong board_spl_fit_size_align(ulong size);
471 * spl_perform_fixups() - arch/board-specific callback before processing
474 void spl_perform_fixups(struct spl_image_info *spl_image);
477 * spl_get_load_buffer() - get buffer for loading partial image data
479 * Returns memory area which can be populated by partial image data,
480 * ie. uImage or fitImage header.
482 struct image_header *spl_get_load_buffer(ssize_t offset, size_t size);