mmc: dm: get the IO-line and main voltage regulators from the dts
[oweals/u-boot.git] / include / mmc.h
1 /*
2  * Copyright 2008,2010 Freescale Semiconductor, Inc
3  * Andy Fleming
4  *
5  * Based (loosely) on the Linux code
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef _MMC_H_
11 #define _MMC_H_
12
13 #include <linux/list.h>
14 #include <linux/sizes.h>
15 #include <linux/compiler.h>
16 #include <part.h>
17
18 /* SD/MMC version bits; 8 flags, 8 major, 8 minor, 8 change */
19 #define SD_VERSION_SD   (1U << 31)
20 #define MMC_VERSION_MMC (1U << 30)
21
22 #define MAKE_SDMMC_VERSION(a, b, c)     \
23         ((((u32)(a)) << 16) | ((u32)(b) << 8) | (u32)(c))
24 #define MAKE_SD_VERSION(a, b, c)        \
25         (SD_VERSION_SD | MAKE_SDMMC_VERSION(a, b, c))
26 #define MAKE_MMC_VERSION(a, b, c)       \
27         (MMC_VERSION_MMC | MAKE_SDMMC_VERSION(a, b, c))
28
29 #define EXTRACT_SDMMC_MAJOR_VERSION(x)  \
30         (((u32)(x) >> 16) & 0xff)
31 #define EXTRACT_SDMMC_MINOR_VERSION(x)  \
32         (((u32)(x) >> 8) & 0xff)
33 #define EXTRACT_SDMMC_CHANGE_VERSION(x) \
34         ((u32)(x) & 0xff)
35
36 #define SD_VERSION_3            MAKE_SD_VERSION(3, 0, 0)
37 #define SD_VERSION_2            MAKE_SD_VERSION(2, 0, 0)
38 #define SD_VERSION_1_0          MAKE_SD_VERSION(1, 0, 0)
39 #define SD_VERSION_1_10         MAKE_SD_VERSION(1, 10, 0)
40
41 #define MMC_VERSION_UNKNOWN     MAKE_MMC_VERSION(0, 0, 0)
42 #define MMC_VERSION_1_2         MAKE_MMC_VERSION(1, 2, 0)
43 #define MMC_VERSION_1_4         MAKE_MMC_VERSION(1, 4, 0)
44 #define MMC_VERSION_2_2         MAKE_MMC_VERSION(2, 2, 0)
45 #define MMC_VERSION_3           MAKE_MMC_VERSION(3, 0, 0)
46 #define MMC_VERSION_4           MAKE_MMC_VERSION(4, 0, 0)
47 #define MMC_VERSION_4_1         MAKE_MMC_VERSION(4, 1, 0)
48 #define MMC_VERSION_4_2         MAKE_MMC_VERSION(4, 2, 0)
49 #define MMC_VERSION_4_3         MAKE_MMC_VERSION(4, 3, 0)
50 #define MMC_VERSION_4_41        MAKE_MMC_VERSION(4, 4, 1)
51 #define MMC_VERSION_4_5         MAKE_MMC_VERSION(4, 5, 0)
52 #define MMC_VERSION_5_0         MAKE_MMC_VERSION(5, 0, 0)
53 #define MMC_VERSION_5_1         MAKE_MMC_VERSION(5, 1, 0)
54
55 #define MMC_MODE_HS             (1 << 0)
56 #define MMC_MODE_HS_52MHz       (1 << 1)
57 #define MMC_MODE_4BIT           (1 << 2)
58 #define MMC_MODE_8BIT           (1 << 3)
59 #define MMC_MODE_SPI            (1 << 4)
60 #define MMC_MODE_DDR_52MHz      (1 << 5)
61
62 #define SD_DATA_4BIT    0x00040000
63
64 #define IS_SD(x)        ((x)->version & SD_VERSION_SD)
65 #define IS_MMC(x)       ((x)->version & MMC_VERSION_MMC)
66
67 #define MMC_DATA_READ           1
68 #define MMC_DATA_WRITE          2
69
70 #define MMC_CMD_GO_IDLE_STATE           0
71 #define MMC_CMD_SEND_OP_COND            1
72 #define MMC_CMD_ALL_SEND_CID            2
73 #define MMC_CMD_SET_RELATIVE_ADDR       3
74 #define MMC_CMD_SET_DSR                 4
75 #define MMC_CMD_SWITCH                  6
76 #define MMC_CMD_SELECT_CARD             7
77 #define MMC_CMD_SEND_EXT_CSD            8
78 #define MMC_CMD_SEND_CSD                9
79 #define MMC_CMD_SEND_CID                10
80 #define MMC_CMD_STOP_TRANSMISSION       12
81 #define MMC_CMD_SEND_STATUS             13
82 #define MMC_CMD_SET_BLOCKLEN            16
83 #define MMC_CMD_READ_SINGLE_BLOCK       17
84 #define MMC_CMD_READ_MULTIPLE_BLOCK     18
85 #define MMC_CMD_SET_BLOCK_COUNT         23
86 #define MMC_CMD_WRITE_SINGLE_BLOCK      24
87 #define MMC_CMD_WRITE_MULTIPLE_BLOCK    25
88 #define MMC_CMD_ERASE_GROUP_START       35
89 #define MMC_CMD_ERASE_GROUP_END         36
90 #define MMC_CMD_ERASE                   38
91 #define MMC_CMD_APP_CMD                 55
92 #define MMC_CMD_SPI_READ_OCR            58
93 #define MMC_CMD_SPI_CRC_ON_OFF          59
94 #define MMC_CMD_RES_MAN                 62
95
96 #define MMC_CMD62_ARG1                  0xefac62ec
97 #define MMC_CMD62_ARG2                  0xcbaea7
98
99
100 #define SD_CMD_SEND_RELATIVE_ADDR       3
101 #define SD_CMD_SWITCH_FUNC              6
102 #define SD_CMD_SEND_IF_COND             8
103 #define SD_CMD_SWITCH_UHS18V            11
104
105 #define SD_CMD_APP_SET_BUS_WIDTH        6
106 #define SD_CMD_APP_SD_STATUS            13
107 #define SD_CMD_ERASE_WR_BLK_START       32
108 #define SD_CMD_ERASE_WR_BLK_END         33
109 #define SD_CMD_APP_SEND_OP_COND         41
110 #define SD_CMD_APP_SEND_SCR             51
111
112 /* SCR definitions in different words */
113 #define SD_HIGHSPEED_BUSY       0x00020000
114 #define SD_HIGHSPEED_SUPPORTED  0x00020000
115
116 #define OCR_BUSY                0x80000000
117 #define OCR_HCS                 0x40000000
118 #define OCR_VOLTAGE_MASK        0x007FFF80
119 #define OCR_ACCESS_MODE         0x60000000
120
121 #define MMC_ERASE_ARG           0x00000000
122 #define MMC_SECURE_ERASE_ARG    0x80000000
123 #define MMC_TRIM_ARG            0x00000001
124 #define MMC_DISCARD_ARG         0x00000003
125 #define MMC_SECURE_TRIM1_ARG    0x80000001
126 #define MMC_SECURE_TRIM2_ARG    0x80008000
127
128 #define MMC_STATUS_MASK         (~0x0206BF7F)
129 #define MMC_STATUS_SWITCH_ERROR (1 << 7)
130 #define MMC_STATUS_RDY_FOR_DATA (1 << 8)
131 #define MMC_STATUS_CURR_STATE   (0xf << 9)
132 #define MMC_STATUS_ERROR        (1 << 19)
133
134 #define MMC_STATE_PRG           (7 << 9)
135
136 #define MMC_VDD_165_195         0x00000080      /* VDD voltage 1.65 - 1.95 */
137 #define MMC_VDD_20_21           0x00000100      /* VDD voltage 2.0 ~ 2.1 */
138 #define MMC_VDD_21_22           0x00000200      /* VDD voltage 2.1 ~ 2.2 */
139 #define MMC_VDD_22_23           0x00000400      /* VDD voltage 2.2 ~ 2.3 */
140 #define MMC_VDD_23_24           0x00000800      /* VDD voltage 2.3 ~ 2.4 */
141 #define MMC_VDD_24_25           0x00001000      /* VDD voltage 2.4 ~ 2.5 */
142 #define MMC_VDD_25_26           0x00002000      /* VDD voltage 2.5 ~ 2.6 */
143 #define MMC_VDD_26_27           0x00004000      /* VDD voltage 2.6 ~ 2.7 */
144 #define MMC_VDD_27_28           0x00008000      /* VDD voltage 2.7 ~ 2.8 */
145 #define MMC_VDD_28_29           0x00010000      /* VDD voltage 2.8 ~ 2.9 */
146 #define MMC_VDD_29_30           0x00020000      /* VDD voltage 2.9 ~ 3.0 */
147 #define MMC_VDD_30_31           0x00040000      /* VDD voltage 3.0 ~ 3.1 */
148 #define MMC_VDD_31_32           0x00080000      /* VDD voltage 3.1 ~ 3.2 */
149 #define MMC_VDD_32_33           0x00100000      /* VDD voltage 3.2 ~ 3.3 */
150 #define MMC_VDD_33_34           0x00200000      /* VDD voltage 3.3 ~ 3.4 */
151 #define MMC_VDD_34_35           0x00400000      /* VDD voltage 3.4 ~ 3.5 */
152 #define MMC_VDD_35_36           0x00800000      /* VDD voltage 3.5 ~ 3.6 */
153
154 #define MMC_SWITCH_MODE_CMD_SET         0x00 /* Change the command set */
155 #define MMC_SWITCH_MODE_SET_BITS        0x01 /* Set bits in EXT_CSD byte
156                                                 addressed by index which are
157                                                 1 in value field */
158 #define MMC_SWITCH_MODE_CLEAR_BITS      0x02 /* Clear bits in EXT_CSD byte
159                                                 addressed by index, which are
160                                                 1 in value field */
161 #define MMC_SWITCH_MODE_WRITE_BYTE      0x03 /* Set target byte to value */
162
163 #define SD_SWITCH_CHECK         0
164 #define SD_SWITCH_SWITCH        1
165
166 /*
167  * EXT_CSD fields
168  */
169 #define EXT_CSD_ENH_START_ADDR          136     /* R/W */
170 #define EXT_CSD_ENH_SIZE_MULT           140     /* R/W */
171 #define EXT_CSD_GP_SIZE_MULT            143     /* R/W */
172 #define EXT_CSD_PARTITION_SETTING       155     /* R/W */
173 #define EXT_CSD_PARTITIONS_ATTRIBUTE    156     /* R/W */
174 #define EXT_CSD_MAX_ENH_SIZE_MULT       157     /* R */
175 #define EXT_CSD_PARTITIONING_SUPPORT    160     /* RO */
176 #define EXT_CSD_RST_N_FUNCTION          162     /* R/W */
177 #define EXT_CSD_BKOPS_EN                163     /* R/W & R/W/E */
178 #define EXT_CSD_WR_REL_PARAM            166     /* R */
179 #define EXT_CSD_WR_REL_SET              167     /* R/W */
180 #define EXT_CSD_RPMB_MULT               168     /* RO */
181 #define EXT_CSD_ERASE_GROUP_DEF         175     /* R/W */
182 #define EXT_CSD_BOOT_BUS_WIDTH          177
183 #define EXT_CSD_PART_CONF               179     /* R/W */
184 #define EXT_CSD_BUS_WIDTH               183     /* R/W */
185 #define EXT_CSD_HS_TIMING               185     /* R/W */
186 #define EXT_CSD_REV                     192     /* RO */
187 #define EXT_CSD_CARD_TYPE               196     /* RO */
188 #define EXT_CSD_SEC_CNT                 212     /* RO, 4 bytes */
189 #define EXT_CSD_HC_WP_GRP_SIZE          221     /* RO */
190 #define EXT_CSD_HC_ERASE_GRP_SIZE       224     /* RO */
191 #define EXT_CSD_BOOT_MULT               226     /* RO */
192 #define EXT_CSD_BKOPS_SUPPORT           502     /* RO */
193
194 /*
195  * EXT_CSD field definitions
196  */
197
198 #define EXT_CSD_CMD_SET_NORMAL          (1 << 0)
199 #define EXT_CSD_CMD_SET_SECURE          (1 << 1)
200 #define EXT_CSD_CMD_SET_CPSECURE        (1 << 2)
201
202 #define EXT_CSD_CARD_TYPE_26    (1 << 0)        /* Card can run at 26MHz */
203 #define EXT_CSD_CARD_TYPE_52    (1 << 1)        /* Card can run at 52MHz */
204 #define EXT_CSD_CARD_TYPE_DDR_1_8V      (1 << 2)
205 #define EXT_CSD_CARD_TYPE_DDR_1_2V      (1 << 3)
206 #define EXT_CSD_CARD_TYPE_DDR_52        (EXT_CSD_CARD_TYPE_DDR_1_8V \
207                                         | EXT_CSD_CARD_TYPE_DDR_1_2V)
208
209 #define EXT_CSD_BUS_WIDTH_1     0       /* Card is in 1 bit mode */
210 #define EXT_CSD_BUS_WIDTH_4     1       /* Card is in 4 bit mode */
211 #define EXT_CSD_BUS_WIDTH_8     2       /* Card is in 8 bit mode */
212 #define EXT_CSD_DDR_BUS_WIDTH_4 5       /* Card is in 4 bit DDR mode */
213 #define EXT_CSD_DDR_BUS_WIDTH_8 6       /* Card is in 8 bit DDR mode */
214
215 #define EXT_CSD_BOOT_ACK_ENABLE                 (1 << 6)
216 #define EXT_CSD_BOOT_PARTITION_ENABLE           (1 << 3)
217 #define EXT_CSD_PARTITION_ACCESS_ENABLE         (1 << 0)
218 #define EXT_CSD_PARTITION_ACCESS_DISABLE        (0 << 0)
219
220 #define EXT_CSD_BOOT_ACK(x)             (x << 6)
221 #define EXT_CSD_BOOT_PART_NUM(x)        (x << 3)
222 #define EXT_CSD_PARTITION_ACCESS(x)     (x << 0)
223
224 #define EXT_CSD_EXTRACT_BOOT_ACK(x)             (((x) >> 6) & 0x1)
225 #define EXT_CSD_EXTRACT_BOOT_PART(x)            (((x) >> 3) & 0x7)
226 #define EXT_CSD_EXTRACT_PARTITION_ACCESS(x)     ((x) & 0x7)
227
228 #define EXT_CSD_BOOT_BUS_WIDTH_MODE(x)  (x << 3)
229 #define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2)
230 #define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x)
231
232 #define EXT_CSD_PARTITION_SETTING_COMPLETED     (1 << 0)
233
234 #define EXT_CSD_ENH_USR         (1 << 0)        /* user data area is enhanced */
235 #define EXT_CSD_ENH_GP(x)       (1 << ((x)+1))  /* GP part (x+1) is enhanced */
236
237 #define EXT_CSD_HS_CTRL_REL     (1 << 0)        /* host controlled WR_REL_SET */
238
239 #define EXT_CSD_WR_DATA_REL_USR         (1 << 0)        /* user data area WR_REL */
240 #define EXT_CSD_WR_DATA_REL_GP(x)       (1 << ((x)+1))  /* GP part (x+1) WR_REL */
241
242 #define R1_ILLEGAL_COMMAND              (1 << 22)
243 #define R1_APP_CMD                      (1 << 5)
244
245 #define MMC_RSP_PRESENT (1 << 0)
246 #define MMC_RSP_136     (1 << 1)                /* 136 bit response */
247 #define MMC_RSP_CRC     (1 << 2)                /* expect valid crc */
248 #define MMC_RSP_BUSY    (1 << 3)                /* card may send busy */
249 #define MMC_RSP_OPCODE  (1 << 4)                /* response contains opcode */
250
251 #define MMC_RSP_NONE    (0)
252 #define MMC_RSP_R1      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
253 #define MMC_RSP_R1b     (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \
254                         MMC_RSP_BUSY)
255 #define MMC_RSP_R2      (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
256 #define MMC_RSP_R3      (MMC_RSP_PRESENT)
257 #define MMC_RSP_R4      (MMC_RSP_PRESENT)
258 #define MMC_RSP_R5      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
259 #define MMC_RSP_R6      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
260 #define MMC_RSP_R7      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
261
262 #define MMCPART_NOAVAILABLE     (0xff)
263 #define PART_ACCESS_MASK        (0x7)
264 #define PART_SUPPORT            (0x1)
265 #define ENHNCD_SUPPORT          (0x2)
266 #define PART_ENH_ATTRIB         (0x1f)
267
268 /* Maximum block size for MMC */
269 #define MMC_MAX_BLOCK_LEN       512
270
271 /* The number of MMC physical partitions.  These consist of:
272  * boot partitions (2), general purpose partitions (4) in MMC v4.4.
273  */
274 #define MMC_NUM_BOOT_PARTITION  2
275 #define MMC_PART_RPMB           3       /* RPMB partition number */
276
277 /* Driver model support */
278
279 /**
280  * struct mmc_uclass_priv - Holds information about a device used by the uclass
281  */
282 struct mmc_uclass_priv {
283         struct mmc *mmc;
284 };
285
286 /**
287  * mmc_get_mmc_dev() - get the MMC struct pointer for a device
288  *
289  * Provided that the device is already probed and ready for use, this value
290  * will be available.
291  *
292  * @dev:        Device
293  * @return associated mmc struct pointer if available, else NULL
294  */
295 struct mmc *mmc_get_mmc_dev(struct udevice *dev);
296
297 /* End of driver model support */
298
299 struct mmc_cid {
300         unsigned long psn;
301         unsigned short oid;
302         unsigned char mid;
303         unsigned char prv;
304         unsigned char mdt;
305         char pnm[7];
306 };
307
308 struct mmc_cmd {
309         ushort cmdidx;
310         uint resp_type;
311         uint cmdarg;
312         uint response[4];
313 };
314
315 struct mmc_data {
316         union {
317                 char *dest;
318                 const char *src; /* src buffers don't get written to */
319         };
320         uint flags;
321         uint blocks;
322         uint blocksize;
323 };
324
325 /* forward decl. */
326 struct mmc;
327
328 #if CONFIG_IS_ENABLED(DM_MMC)
329 struct dm_mmc_ops {
330         /**
331          * send_cmd() - Send a command to the MMC device
332          *
333          * @dev:        Device to receive the command
334          * @cmd:        Command to send
335          * @data:       Additional data to send/receive
336          * @return 0 if OK, -ve on error
337          */
338         int (*send_cmd)(struct udevice *dev, struct mmc_cmd *cmd,
339                         struct mmc_data *data);
340
341         /**
342          * set_ios() - Set the I/O speed/width for an MMC device
343          *
344          * @dev:        Device to update
345          * @return 0 if OK, -ve on error
346          */
347         int (*set_ios)(struct udevice *dev);
348
349         /**
350          * get_cd() - See whether a card is present
351          *
352          * @dev:        Device to check
353          * @return 0 if not present, 1 if present, -ve on error
354          */
355         int (*get_cd)(struct udevice *dev);
356
357         /**
358          * get_wp() - See whether a card has write-protect enabled
359          *
360          * @dev:        Device to check
361          * @return 0 if write-enabled, 1 if write-protected, -ve on error
362          */
363         int (*get_wp)(struct udevice *dev);
364 };
365
366 #define mmc_get_ops(dev)        ((struct dm_mmc_ops *)(dev)->driver->ops)
367
368 int dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
369                     struct mmc_data *data);
370 int dm_mmc_set_ios(struct udevice *dev);
371 int dm_mmc_get_cd(struct udevice *dev);
372 int dm_mmc_get_wp(struct udevice *dev);
373
374 /* Transition functions for compatibility */
375 int mmc_set_ios(struct mmc *mmc);
376 int mmc_getcd(struct mmc *mmc);
377 int mmc_getwp(struct mmc *mmc);
378
379 #else
380 struct mmc_ops {
381         int (*send_cmd)(struct mmc *mmc,
382                         struct mmc_cmd *cmd, struct mmc_data *data);
383         int (*set_ios)(struct mmc *mmc);
384         int (*init)(struct mmc *mmc);
385         int (*getcd)(struct mmc *mmc);
386         int (*getwp)(struct mmc *mmc);
387 };
388 #endif
389
390 struct mmc_config {
391         const char *name;
392 #if !CONFIG_IS_ENABLED(DM_MMC)
393         const struct mmc_ops *ops;
394 #endif
395         uint host_caps;
396         uint voltages;
397         uint f_min;
398         uint f_max;
399         uint b_max;
400         unsigned char part_type;
401 };
402
403 struct sd_ssr {
404         unsigned int au;                /* In sectors */
405         unsigned int erase_timeout;     /* In milliseconds */
406         unsigned int erase_offset;      /* In milliseconds */
407 };
408
409 /*
410  * With CONFIG_DM_MMC enabled, struct mmc can be accessed from the MMC device
411  * with mmc_get_mmc_dev().
412  *
413  * TODO struct mmc should be in mmc_private but it's hard to fix right now
414  */
415 struct mmc {
416 #if !CONFIG_IS_ENABLED(BLK)
417         struct list_head link;
418 #endif
419         const struct mmc_config *cfg;   /* provided configuration */
420         uint version;
421         void *priv;
422         uint has_init;
423         int high_capacity;
424         uint bus_width;
425         uint clock;
426         uint card_caps;
427         uint ocr;
428         uint dsr;
429         uint dsr_imp;
430         uint scr[2];
431         uint csd[4];
432         uint cid[4];
433         ushort rca;
434         u8 part_support;
435         u8 part_attr;
436         u8 wr_rel_set;
437         u8 part_config;
438         uint tran_speed;
439         uint read_bl_len;
440         uint write_bl_len;
441         uint erase_grp_size;    /* in 512-byte sectors */
442         uint hc_wp_grp_size;    /* in 512-byte sectors */
443         struct sd_ssr   ssr;    /* SD status register */
444         u64 capacity;
445         u64 capacity_user;
446         u64 capacity_boot;
447         u64 capacity_rpmb;
448         u64 capacity_gp[4];
449         u64 enh_user_start;
450         u64 enh_user_size;
451 #if !CONFIG_IS_ENABLED(BLK)
452         struct blk_desc block_dev;
453 #endif
454         char op_cond_pending;   /* 1 if we are waiting on an op_cond command */
455         char init_in_progress;  /* 1 if we have done mmc_start_init() */
456         char preinit;           /* start init as early as possible */
457         int ddr_mode;
458 #if CONFIG_IS_ENABLED(DM_MMC)
459         struct udevice *dev;    /* Device for this MMC controller */
460 #if CONFIG_IS_ENABLED(DM_REGULATOR)
461         struct udevice *vmmc_supply;    /* Main voltage regulator (Vcc)*/
462         struct udevice *vqmmc_supply;   /* IO voltage regulator (Vccq)*/
463 #endif
464 #endif
465 };
466
467 struct mmc_hwpart_conf {
468         struct {
469                 uint enh_start; /* in 512-byte sectors */
470                 uint enh_size;  /* in 512-byte sectors, if 0 no enh area */
471                 unsigned wr_rel_change : 1;
472                 unsigned wr_rel_set : 1;
473         } user;
474         struct {
475                 uint size;      /* in 512-byte sectors */
476                 unsigned enhanced : 1;
477                 unsigned wr_rel_change : 1;
478                 unsigned wr_rel_set : 1;
479         } gp_part[4];
480 };
481
482 enum mmc_hwpart_conf_mode {
483         MMC_HWPART_CONF_CHECK,
484         MMC_HWPART_CONF_SET,
485         MMC_HWPART_CONF_COMPLETE,
486 };
487
488 struct mmc *mmc_create(const struct mmc_config *cfg, void *priv);
489
490 /**
491  * mmc_bind() - Set up a new MMC device ready for probing
492  *
493  * A child block device is bound with the IF_TYPE_MMC interface type. This
494  * allows the device to be used with CONFIG_BLK
495  *
496  * @dev:        MMC device to set up
497  * @mmc:        MMC struct
498  * @cfg:        MMC configuration
499  * @return 0 if OK, -ve on error
500  */
501 int mmc_bind(struct udevice *dev, struct mmc *mmc,
502              const struct mmc_config *cfg);
503 void mmc_destroy(struct mmc *mmc);
504
505 /**
506  * mmc_unbind() - Unbind a MMC device's child block device
507  *
508  * @dev:        MMC device
509  * @return 0 if OK, -ve on error
510  */
511 int mmc_unbind(struct udevice *dev);
512 int mmc_initialize(bd_t *bis);
513 int mmc_init(struct mmc *mmc);
514 int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size);
515 void mmc_set_clock(struct mmc *mmc, uint clock);
516 struct mmc *find_mmc_device(int dev_num);
517 int mmc_set_dev(int dev_num);
518 void print_mmc_devices(char separator);
519
520 /**
521  * get_mmc_num() - get the total MMC device number
522  *
523  * @return 0 if there is no MMC device, else the number of devices
524  */
525 int get_mmc_num(void);
526 int mmc_switch_part(struct mmc *mmc, unsigned int part_num);
527 int mmc_hwpart_config(struct mmc *mmc, const struct mmc_hwpart_conf *conf,
528                       enum mmc_hwpart_conf_mode mode);
529
530 #if !CONFIG_IS_ENABLED(DM_MMC)
531 int mmc_getcd(struct mmc *mmc);
532 int board_mmc_getcd(struct mmc *mmc);
533 int mmc_getwp(struct mmc *mmc);
534 int board_mmc_getwp(struct mmc *mmc);
535 #endif
536
537 int mmc_set_dsr(struct mmc *mmc, u16 val);
538 /* Function to change the size of boot partition and rpmb partitions */
539 int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
540                                         unsigned long rpmbsize);
541 /* Function to modify the PARTITION_CONFIG field of EXT_CSD */
542 int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
543 /* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */
544 int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode);
545 /* Function to modify the RST_n_FUNCTION field of EXT_CSD */
546 int mmc_set_rst_n_function(struct mmc *mmc, u8 enable);
547 /* Functions to read / write the RPMB partition */
548 int mmc_rpmb_set_key(struct mmc *mmc, void *key);
549 int mmc_rpmb_get_counter(struct mmc *mmc, unsigned long *counter);
550 int mmc_rpmb_read(struct mmc *mmc, void *addr, unsigned short blk,
551                   unsigned short cnt, unsigned char *key);
552 int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk,
553                    unsigned short cnt, unsigned char *key);
554 #ifdef CONFIG_CMD_BKOPS_ENABLE
555 int mmc_set_bkops_enable(struct mmc *mmc);
556 #endif
557
558 /**
559  * Start device initialization and return immediately; it does not block on
560  * polling OCR (operation condition register) status.  Then you should call
561  * mmc_init, which would block on polling OCR status and complete the device
562  * initializatin.
563  *
564  * @param mmc   Pointer to a MMC device struct
565  * @return 0 on success, IN_PROGRESS on waiting for OCR status, <0 on error.
566  */
567 int mmc_start_init(struct mmc *mmc);
568
569 /**
570  * Set preinit flag of mmc device.
571  *
572  * This will cause the device to be pre-inited during mmc_initialize(),
573  * which may save boot time if the device is not accessed until later.
574  * Some eMMC devices take 200-300ms to init, but unfortunately they
575  * must be sent a series of commands to even get them to start preparing
576  * for operation.
577  *
578  * @param mmc           Pointer to a MMC device struct
579  * @param preinit       preinit flag value
580  */
581 void mmc_set_preinit(struct mmc *mmc, int preinit);
582
583 #ifdef CONFIG_MMC_SPI
584 #define mmc_host_is_spi(mmc)    ((mmc)->cfg->host_caps & MMC_MODE_SPI)
585 #else
586 #define mmc_host_is_spi(mmc)    0
587 #endif
588 struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode);
589
590 void board_mmc_power_init(void);
591 int board_mmc_init(bd_t *bis);
592 int cpu_mmc_init(bd_t *bis);
593 int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr);
594 int mmc_get_env_dev(void);
595
596 /* Set block count limit because of 16 bit register limit on some hardware*/
597 #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT
598 #define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535
599 #endif
600
601 /**
602  * mmc_get_blk_desc() - Get the block descriptor for an MMC device
603  *
604  * @mmc:        MMC device
605  * @return block device if found, else NULL
606  */
607 struct blk_desc *mmc_get_blk_desc(struct mmc *mmc);
608
609 #endif /* _MMC_H_ */