include/configs/zipitz2.h

   1 /*
   2  * Aeronix Zipit Z2 configuration file
   3  *
   4  * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 /*
  13  * High Level Board Configuration Options
  14  */
  15 #define CONFIG_CPU_PXA27X               1       /* Marvell PXA270 CPU */
  16
  17 #undef  CONFIG_SKIP_LOWLEVEL_INIT
  18 #define CONFIG_PREBOOT
  19
  20 /*
  21  * Environment settings
  22  */
  23 #define CONFIG_ENV_OVERWRITE
  24 #define CONFIG_ENV_ADDR                 0x40000
  25 #define CONFIG_ENV_SIZE                 0x10000
  26
  27 #define CONFIG_SYS_MALLOC_LEN           (128*1024)
  28 #define CONFIG_ARCH_CPU_INIT
  29
  30 #define CONFIG_BOOTCOMMAND                                              \
  31         "if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\
  32         "then "                                                         \
  33                 "source 0xa0000000; "                                   \
  34         "else "                                                         \
  35                 "bootm 0x50000; "                                       \
  36         "fi; "
  37 #define CONFIG_TIMESTAMP
  38 #define CONFIG_CMDLINE_TAG
  39 #define CONFIG_SETUP_MEMORY_TAGS
  40
  41 /*
  42  * Serial Console Configuration
  43  * STUART - the lower serial port on Colibri board
  44  */
  45 #define CONFIG_STUART                   1
  46
  47 /*
  48  * Bootloader Components Configuration
  49  */
  50
  51 /*
  52  * MMC Card Configuration
  53  */
  54 #ifdef  CONFIG_CMD_MMC
  55 #define CONFIG_PXA_MMC_GENERIC
  56 #define CONFIG_SYS_MMC_BASE             0xF0000000
  57 #endif
  58
  59 /*
  60  * SPI and LCD
  61  */
  62 #ifdef  CONFIG_CMD_SPI
  63 #define CONFIG_SOFT_SPI
  64 #define CONFIG_LCD_ROTATION
  65 #define CONFIG_PXA_LCD
  66 #define CONFIG_LMS283GF05
  67
  68 #define SPI_DELAY       udelay(10)
  69 #define SPI_SDA(val)    zipitz2_spi_sda(val)
  70 #define SPI_SCL(val)    zipitz2_spi_scl(val)
  71 #define SPI_READ        zipitz2_spi_read()
  72 #ifndef __ASSEMBLY__
  73 void zipitz2_spi_sda(int);
  74 void zipitz2_spi_scl(int);
  75 unsigned char zipitz2_spi_read(void);
  76 #endif
  77 #endif
  78
  79 #define CONFIG_SYS_DEVICE_NULLDEV       1
  80
  81 /*
  82  * Clock Configuration
  83  */
  84 #define CONFIG_SYS_CPUSPEED             0x190           /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
  85
  86 /*
  87  * SRAM Map
  88  */
  89 #define PHYS_SRAM                       0x5c000000      /* SRAM Bank #1 */
  90 #define PHYS_SRAM_SIZE                  0x00040000      /* 256k */
  91
  92 /*
  93  * DRAM Map
  94  */
  95 #define CONFIG_NR_DRAM_BANKS            1               /* We have 1 bank of DRAM */
  96 #define PHYS_SDRAM_1                    0xa0000000      /* SDRAM Bank #1 */
  97 #define PHYS_SDRAM_1_SIZE               0x02000000      /* 32 MB */
  98
  99 #define CONFIG_SYS_DRAM_BASE            0xa0000000      /* CS0 */
 100 #define CONFIG_SYS_DRAM_SIZE            0x02000000      /* 32 MB DRAM */
 101
 102 #define CONFIG_SYS_MEMTEST_START        0xa0400000      /* memtest works on */
 103 #define CONFIG_SYS_MEMTEST_END          0xa0800000      /* 4 ... 8 MB in DRAM */
 104
 105 #define CONFIG_SYS_LOAD_ADDR            CONFIG_SYS_DRAM_BASE
 106
 107 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 108 #define CONFIG_SYS_INIT_SP_ADDR         (GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048)
 109
 110 /*
 111  * NOR FLASH
 112  */
 113 #define PHYS_FLASH_1                    0x00000000      /* Flash Bank #1 */
 114 #define PHYS_FLASH_SIZE                 0x00800000      /* 8 MB */
 115 #define PHYS_FLASH_SECT_SIZE            0x00010000      /* 64 KB sectors */
 116 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 117
 118 #define CONFIG_SYS_FLASH_CFI
 119 #define CONFIG_FLASH_CFI_DRIVER         1
 120 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 121
 122 #define CONFIG_SYS_MONITOR_BASE         PHYS_FLASH_1
 123 #define CONFIG_SYS_MONITOR_LEN          PHYS_FLASH_SECT_SIZE
 124
 125 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 126 #define CONFIG_SYS_MAX_FLASH_SECT       256
 127
 128 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
 129
 130 #define CONFIG_SYS_FLASH_ERASE_TOUT     240000
 131 #define CONFIG_SYS_FLASH_WRITE_TOUT     240000
 132 #define CONFIG_SYS_FLASH_LOCK_TOUT      240000
 133 #define CONFIG_SYS_FLASH_UNLOCK_TOUT    240000
 134 #define CONFIG_SYS_FLASH_PROTECTION
 135
 136 /*
 137  * GPIO settings
 138  */
 139 #define CONFIG_SYS_GAFR0_L_VAL  0x02000140
 140 #define CONFIG_SYS_GAFR0_U_VAL  0x59188000
 141 #define CONFIG_SYS_GAFR1_L_VAL  0x63900002
 142 #define CONFIG_SYS_GAFR1_U_VAL  0xaaa03950
 143 #define CONFIG_SYS_GAFR2_L_VAL  0x0aaaaaaa
 144 #define CONFIG_SYS_GAFR2_U_VAL  0x29000308
 145 #define CONFIG_SYS_GAFR3_L_VAL  0x54000000
 146 #define CONFIG_SYS_GAFR3_U_VAL  0x000000d5
 147 #define CONFIG_SYS_GPCR0_VAL    0x00000000
 148 #define CONFIG_SYS_GPCR1_VAL    0x00000020
 149 #define CONFIG_SYS_GPCR2_VAL    0x00000000
 150 #define CONFIG_SYS_GPCR3_VAL    0x00000000
 151 #define CONFIG_SYS_GPDR0_VAL    0xdafcee00
 152 #define CONFIG_SYS_GPDR1_VAL    0xffa3aaab
 153 #define CONFIG_SYS_GPDR2_VAL    0x8fe9ffff
 154 #define CONFIG_SYS_GPDR3_VAL    0x001b1f8a
 155 #define CONFIG_SYS_GPSR0_VAL    0x06080400
 156 #define CONFIG_SYS_GPSR1_VAL    0x007f0000
 157 #define CONFIG_SYS_GPSR2_VAL    0x032a0000
 158 #define CONFIG_SYS_GPSR3_VAL    0x00000180
 159
 160 #define CONFIG_SYS_PSSR_VAL     0x30
 161
 162 /*
 163  * Clock settings
 164  */
 165 #define CONFIG_SYS_CKEN         0x00511220
 166 #define CONFIG_SYS_CCCR         0x00000190
 167
 168 /*
 169  * Memory settings
 170  */
 171 #define CONFIG_SYS_MSC0_VAL     0x2ffc38f8
 172 #define CONFIG_SYS_MSC1_VAL     0x0000ccd1
 173 #define CONFIG_SYS_MSC2_VAL     0x0000b884
 174 #define CONFIG_SYS_MDCNFG_VAL   0x08000ba9
 175 #define CONFIG_SYS_MDREFR_VAL   0x2011a01e
 176 #define CONFIG_SYS_MDMRS_VAL    0x00000000
 177 #define CONFIG_SYS_FLYCNFG_VAL  0x00010001
 178 #define CONFIG_SYS_SXCNFG_VAL   0x40044004
 179
 180 /*
 181  * PCMCIA and CF Interfaces
 182  */
 183 #define CONFIG_SYS_MECR_VAL     0x00000001
 184 #define CONFIG_SYS_MCMEM0_VAL   0x00014307
 185 #define CONFIG_SYS_MCMEM1_VAL   0x00014307
 186 #define CONFIG_SYS_MCATT0_VAL   0x0001c787
 187 #define CONFIG_SYS_MCATT1_VAL   0x0001c787
 188 #define CONFIG_SYS_MCIO0_VAL    0x0001430f
 189 #define CONFIG_SYS_MCIO1_VAL    0x0001430f
 190
 191 #include "pxa-common.h"
 192
 193 #endif  /* __CONFIG_H */