include/configs/xpedite520x.h

   1 /*
   2  * Copyright 2008 Extreme Engineering Solutions, Inc.
   3  * Copyright 2004-2008 Freescale Semiconductor, Inc.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * xpedite520x board configuration file
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*
  15  * High Level Configuration Options
  16  */
  17 #define CONFIG_XPEDITE5200      1
  18 #define CONFIG_SYS_BOARD_NAME   "XPedite5200"
  19 #define CONFIG_SYS_FORM_PMC_XMC 1
  20 #define CONFIG_BOARD_EARLY_INIT_R       /* Call board_pre_init */
  21
  22 #ifndef CONFIG_SYS_TEXT_BASE
  23 #define CONFIG_SYS_TEXT_BASE    0xfff80000
  24 #endif
  25
  26 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup */
  27 #define CONFIG_PCI1             1       /* PCI controller 1 */
  28 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  29 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  30 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  31
  32 /*
  33  * DDR config
  34  */
  35 #undef CONFIG_FSL_DDR_INTERACTIVE
  36 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
  37 #define CONFIG_DDR_SPD
  38 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  39 #define SPD_EEPROM_ADDRESS              0x54
  40 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  41 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
  42 #define CONFIG_DDR_ECC
  43 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  44 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  45 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  46 #define CONFIG_VERY_BIG_RAM
  47
  48 #define CONFIG_SYS_CLK_FREQ     66666666
  49
  50 /*
  51  * These can be toggled for performance analysis, otherwise use default.
  52  */
  53 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  54 #define CONFIG_BTB                      /* toggle branch predition */
  55 #define CONFIG_ENABLE_36BIT_PHYS        1
  56
  57 #define CONFIG_SYS_CCSRBAR              0xef000000
  58 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  59
  60 /*
  61  * Diagnostics
  62  */
  63 #define CONFIG_SYS_ALT_MEMTEST
  64 #define CONFIG_SYS_MEMTEST_START        0x10000000
  65 #define CONFIG_SYS_MEMTEST_END          0x20000000
  66 #define CONFIG_POST                     (CONFIG_SYS_POST_MEMORY | \
  67                                          CONFIG_SYS_POST_I2C)
  68 #define I2C_ADDR_LIST                   {CONFIG_SYS_I2C_MAX1237_ADDR,   \
  69                                          CONFIG_SYS_I2C_EEPROM_ADDR,    \
  70                                          CONFIG_SYS_I2C_PCA953X_ADDR0,  \
  71                                          CONFIG_SYS_I2C_PCA953X_ADDR1,  \
  72                                          CONFIG_SYS_I2C_RTC_ADDR}
  73
  74 /*
  75  * Memory map
  76  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
  77  * 0x8000_0000  0xbfff_ffff     PCI1 Mem                1G non-cacheable
  78  * 0xe000_0000  0xe7ff_ffff     SRAM/SSRAM/L1 Cache     128M non-cacheable
  79  * 0xe800_0000  0xe87f_ffff     PCI1 IO                 8M non-cacheable
  80  * 0xef00_0000  0xef0f_ffff     CCSR/IMMR               1M non-cacheable
  81  * 0xef80_0000  0xef8f_ffff     NAND Flash              1M non-cacheable
  82  * 0xf800_0000  0xfbff_ffff     NOR Flash 2             64M non-cacheable
  83  * 0xfc00_0000  0xffff_ffff     NOR Flash 1             64M non-cacheable
  84  */
  85
  86 #define CONFIG_SYS_LBC_LCRR     (LCRR_CLKDIV_8 | LCRR_EADC_3)
  87
  88 /*
  89  * NAND flash configuration
  90  */
  91 #define CONFIG_SYS_NAND_BASE            0xef800000
  92 #define CONFIG_SYS_NAND_BASE2           0xef840000 /* Unused at this time */
  93 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  94 #define CONFIG_NAND_ACTL
  95 #define CONFIG_SYS_NAND_ACTL_CLE        (1 << 3)        /* ADDR3 is CLE */
  96 #define CONFIG_SYS_NAND_ACTL_ALE        (1 << 4)        /* ADDR4 is ALE */
  97 #define CONFIG_SYS_NAND_ACTL_NCE        (0)             /* NCE not controlled by ADDR */
  98 #define CONFIG_SYS_NAND_ACTL_DELAY      25
  99
 100 /*
 101  * NOR flash configuration
 102  */
 103 #define CONFIG_SYS_FLASH_BASE           0xfc000000
 104 #define CONFIG_SYS_FLASH_BASE2          0xf8000000
 105 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
 106 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 107 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 108 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 109 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 110 #define CONFIG_FLASH_CFI_DRIVER
 111 #define CONFIG_SYS_FLASH_CFI
 112 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 113 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST       { {0xfff40000, 0xc0000}, \
 114                                                   {0xfbf40000, 0xc0000} }
 115 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 116
 117 /*
 118  * Chip select configuration
 119  */
 120 /* NOR Flash 0 on CS0 */
 121 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE  | \
 122                                  BR_PS_16               | \
 123                                  BR_V)
 124 #define CONFIG_SYS_OR0_PRELIM   (OR_AM_64MB             | \
 125                                  OR_GPCM_ACS_DIV4       | \
 126                                  OR_GPCM_SCY_8)
 127
 128 /* NOR Flash 1 on CS1 */
 129 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_FLASH_BASE2 | \
 130                                  BR_PS_16               | \
 131                                  BR_V)
 132 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 133
 134 /* NAND flash on CS2 */
 135 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_NAND_BASE   | \
 136                                  BR_PS_8                | \
 137                                  BR_V)
 138
 139 /* NAND flash on CS2 */
 140 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_256KB            | \
 141                                  OR_GPCM_BCTLD          | \
 142                                  OR_GPCM_CSNT           | \
 143                                  OR_GPCM_ACS_DIV4       | \
 144                                  OR_GPCM_SCY_4          | \
 145                                  OR_GPCM_TRLX           | \
 146                                  OR_GPCM_EHTR)
 147
 148 /* NAND flash on CS3 */
 149 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE2  | \
 150                                  BR_PS_8                | \
 151                                  BR_V)
 152 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 153
 154 /*
 155  * Use L1 as initial stack
 156  */
 157 #define CONFIG_SYS_INIT_RAM_LOCK        1
 158 #define CONFIG_SYS_INIT_RAM_ADDR        0xe0000000
 159 #define CONFIG_SYS_INIT_RAM_SIZE                0x4000
 160
 161 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 162 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 163
 164 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
 165 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 166
 167 /*
 168  * Serial Port
 169  */
 170 #define CONFIG_CONS_INDEX               1
 171 #define CONFIG_SYS_NS16550_SERIAL
 172 #define CONFIG_SYS_NS16550_REG_SIZE     1
 173 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 174 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 175 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 176 #define CONFIG_SYS_BAUDRATE_TABLE       \
 177         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 178 #define CONFIG_BAUDRATE                 115200
 179 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
 180 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 181
 182 /*
 183  * I2C
 184  */
 185 #define CONFIG_SYS_I2C
 186 #define CONFIG_SYS_I2C_FSL
 187 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 188 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 189 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 190 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 191 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 192 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 193
 194 /* I2C EEPROM */
 195 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 196 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 197 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
 198 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
 199
 200 /* I2C RTC */
 201 #define CONFIG_RTC_M41T11                       1
 202 #define CONFIG_SYS_I2C_RTC_ADDR                 0x68
 203 #define CONFIG_SYS_M41T11_BASE_YEAR             2000
 204
 205 /* GPIO */
 206 #define CONFIG_PCA953X
 207 #define CONFIG_SYS_I2C_PCA953X_ADDR0            0x18
 208 #define CONFIG_SYS_I2C_PCA953X_ADDR1            0x19
 209 #define CONFIG_SYS_I2C_PCA953X_ADDR             CONFIG_SYS_I2C_PCA953X_ADDR0
 210
 211 /* PCA957 @ 0x18 */
 212 #define CONFIG_SYS_PCA953X_BRD_CFG0             0x01
 213 #define CONFIG_SYS_PCA953X_BRD_CFG1             0x02
 214 #define CONFIG_SYS_PCA953X_BRD_CFG2             0x04
 215 #define CONFIG_SYS_PCA953X_XMC_ROOT0            0x08
 216 #define CONFIG_SYS_PCA953X_FLASH_PASS_CS        0x10
 217 #define CONFIG_SYS_PCA953X_NVM_WP               0x20
 218 #define CONFIG_SYS_PCA953X_MONARCH              0x40
 219 #define CONFIG_SYS_PCA953X_EREADY               0x80
 220
 221 /* PCA957 @ 0x19 */
 222 #define CONFIG_SYS_PCA953X_P14_IO0              0x01
 223 #define CONFIG_SYS_PCA953X_P14_IO1              0x02
 224 #define CONFIG_SYS_PCA953X_P14_IO2              0x04
 225 #define CONFIG_SYS_PCA953X_P14_IO3              0x08
 226 #define CONFIG_SYS_PCA953X_P14_IO4              0x10
 227 #define CONFIG_SYS_PCA953X_P14_IO5              0x20
 228 #define CONFIG_SYS_PCA953X_P14_IO6              0x40
 229 #define CONFIG_SYS_PCA953X_P14_IO7              0x80
 230
 231 /* 12-bit ADC used to measure CPU diode */
 232 #define CONFIG_SYS_I2C_MAX1237_ADDR             0x34
 233
 234 /*
 235  * General PCI
 236  * Memory space is mapped 1-1, but I/O space must start from 0.
 237  */
 238 #define CONFIG_SYS_PCI1_MEM_BUS         0x80000000
 239 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BUS
 240 #define CONFIG_SYS_PCI1_MEM_SIZE        0x40000000      /* 1G */
 241 #define CONFIG_SYS_PCI1_IO_BUS          0x00000000
 242 #define CONFIG_SYS_PCI1_IO_PHYS         0xe8000000
 243 #define CONFIG_SYS_PCI1_IO_SIZE         0x00800000      /* 1M */
 244
 245 /*
 246  * Networking options
 247  */
 248 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
 249 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 250 #define CONFIG_MII              1       /* MII PHY management */
 251 #define CONFIG_ETHPRIME         "eTSEC1"
 252
 253 #define CONFIG_TSEC1            1
 254 #define CONFIG_TSEC1_NAME       "eTSEC1"
 255 #define TSEC1_FLAGS             TSEC_GIGABIT
 256 #define TSEC1_PHY_ADDR          1
 257 #define TSEC1_PHYIDX            0
 258 #define CONFIG_HAS_ETH0
 259
 260 #define CONFIG_TSEC2            1
 261 #define CONFIG_TSEC2_NAME       "eTSEC2"
 262 #define TSEC2_FLAGS             TSEC_GIGABIT
 263 #define TSEC2_PHY_ADDR          2
 264 #define TSEC2_PHYIDX            0
 265 #define CONFIG_HAS_ETH1
 266
 267 #define CONFIG_TSEC3    1
 268 #define CONFIG_TSEC3_NAME       "eTSEC3"
 269 #define TSEC3_FLAGS             TSEC_GIGABIT
 270 #define TSEC3_PHY_ADDR          3
 271 #define TSEC3_PHYIDX            0
 272 #define CONFIG_HAS_ETH2
 273
 274 #define CONFIG_TSEC4    1
 275 #define CONFIG_TSEC4_NAME       "eTSEC4"
 276 #define TSEC4_FLAGS             TSEC_GIGABIT
 277 #define TSEC4_PHY_ADDR          4
 278 #define TSEC4_PHYIDX            0
 279 #define CONFIG_HAS_ETH3
 280
 281 /*
 282  * BOOTP options
 283  */
 284 #define CONFIG_BOOTP_BOOTFILESIZE
 285 #define CONFIG_BOOTP_BOOTPATH
 286 #define CONFIG_BOOTP_GATEWAY
 287
 288 /*
 289  * Command configuration.
 290  */
 291 #define CONFIG_CMD_DATE
 292 #define CONFIG_CMD_EEPROM
 293 #define CONFIG_CMD_JFFS2
 294 #define CONFIG_CMD_NAND
 295 #define CONFIG_CMD_PCA953X
 296 #define CONFIG_CMD_PCA953X_INFO
 297 #define CONFIG_CMD_PCI
 298 #define CONFIG_CMD_PCI_ENUM
 299 #define CONFIG_CMD_REGINFO
 300
 301 /*
 302  * Miscellaneous configurable options
 303  */
 304 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 305 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 306 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 307 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 308 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 309 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 310 #define CONFIG_CMDLINE_EDITING  1               /* add command line history     */
 311 #define CONFIG_AUTO_COMPLETE    1               /* add autocompletion support */
 312 #define CONFIG_LOADADDR         0x1000000       /* default location for tftp and bootm */
 313 #define CONFIG_PANIC_HANG                       /* do not reset board on panic */
 314 #define CONFIG_PREBOOT                          /* enable preboot variable */
 315 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
 316 #define CONFIG_INTERRUPTS               /* enable pci, srio, ddr interrupts */
 317
 318 /*
 319  * For booting Linux, the board info and command line data
 320  * have to be in the first 16 MB of memory, since this is
 321  * the maximum mapped by the Linux kernel during initialization.
 322  */
 323 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
 324 #define CONFIG_SYS_BOOTM_LEN    (16 << 20)      /* Increase max gunzip size */
 325
 326 /*
 327  * Environment Configuration
 328  */
 329 #define CONFIG_ENV_IS_IN_FLASH  1
 330 #define CONFIG_ENV_SECT_SIZE    0x20000         /* 128k (one sector) for env */
 331 #define CONFIG_ENV_SIZE         0x8000
 332 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
 333
 334 /*
 335  * Flash memory map:
 336  * fff80000 - ffffffff     Pri U-Boot (512 KB)
 337  * fff40000 - fff7ffff     Pri U-Boot Environment (256 KB)
 338  * fff00000 - fff3ffff     Pri FDT (256KB)
 339  * fef00000 - ffefffff     Pri OS image (16MB)
 340  * fc000000 - feefffff     Pri OS Use/Filesystem (47MB)
 341  *
 342  * fbf80000 - fbffffff     Sec U-Boot (512 KB)
 343  * fbf40000 - fbf7ffff     Sec U-Boot Environment (256 KB)
 344  * fbf00000 - fbf3ffff     Sec FDT (256KB)
 345  * faf00000 - fbefffff     Sec OS image (16MB)
 346  * f8000000 - faefffff     Sec OS Use/Filesystem (47MB)
 347  */
 348 #define CONFIG_UBOOT1_ENV_ADDR  __stringify(0xfff80000)
 349 #define CONFIG_UBOOT2_ENV_ADDR  __stringify(0xfbf80000)
 350 #define CONFIG_FDT1_ENV_ADDR    __stringify(0xfff00000)
 351 #define CONFIG_FDT2_ENV_ADDR    __stringify(0xfbf00000)
 352 #define CONFIG_OS1_ENV_ADDR     __stringify(0xfef00000)
 353 #define CONFIG_OS2_ENV_ADDR     __stringify(0xfaf00000)
 354
 355 #define CONFIG_PROG_UBOOT1                                              \
 356         "$download_cmd $loadaddr $ubootfile; "                          \
 357         "if test $? -eq 0; then "                                       \
 358                 "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "         \
 359                 "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "               \
 360                 "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "       \
 361                 "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "          \
 362                 "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "      \
 363                 "if test $? -ne 0; then "                               \
 364                         "echo PROGRAM FAILED; "                         \
 365                 "else; "                                                \
 366                         "echo PROGRAM SUCCEEDED; "                      \
 367                 "fi; "                                                  \
 368         "else; "                                                        \
 369                 "echo DOWNLOAD FAILED; "                                \
 370         "fi;"
 371
 372 #define CONFIG_PROG_UBOOT2                                              \
 373         "$download_cmd $loadaddr $ubootfile; "                          \
 374         "if test $? -eq 0; then "                                       \
 375                 "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "         \
 376                 "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "               \
 377                 "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "       \
 378                 "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "          \
 379                 "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "      \
 380                 "if test $? -ne 0; then "                               \
 381                         "echo PROGRAM FAILED; "                         \
 382                 "else; "                                                \
 383                         "echo PROGRAM SUCCEEDED; "                      \
 384                 "fi; "                                                  \
 385         "else; "                                                        \
 386                 "echo DOWNLOAD FAILED; "                                \
 387         "fi;"
 388
 389 #define CONFIG_BOOT_OS_NET                                              \
 390         "$download_cmd $osaddr $osfile; "                               \
 391         "if test $? -eq 0; then "                                       \
 392                 "if test -n $fdtaddr; then "                            \
 393                         "$download_cmd $fdtaddr $fdtfile; "             \
 394                         "if test $? -eq 0; then "                       \
 395                                 "bootm $osaddr - $fdtaddr; "            \
 396                         "else; "                                        \
 397                                 "echo FDT DOWNLOAD FAILED; "            \
 398                         "fi; "                                          \
 399                 "else; "                                                \
 400                         "bootm $osaddr; "                               \
 401                 "fi; "                                                  \
 402         "else; "                                                        \
 403                 "echo OS DOWNLOAD FAILED; "                             \
 404         "fi;"
 405
 406 #define CONFIG_PROG_OS1                                                 \
 407         "$download_cmd $osaddr $osfile; "                               \
 408         "if test $? -eq 0; then "                                       \
 409                 "erase "CONFIG_OS1_ENV_ADDR" +$filesize; "              \
 410                 "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "        \
 411                 "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "       \
 412                 "if test $? -ne 0; then "                               \
 413                         "echo OS PROGRAM FAILED; "                      \
 414                 "else; "                                                \
 415                         "echo OS PROGRAM SUCCEEDED; "                   \
 416                 "fi; "                                                  \
 417         "else; "                                                        \
 418                 "echo OS DOWNLOAD FAILED; "                             \
 419         "fi;"
 420
 421 #define CONFIG_PROG_OS2                                                 \
 422         "$download_cmd $osaddr $osfile; "                               \
 423         "if test $? -eq 0; then "                                       \
 424                 "erase "CONFIG_OS2_ENV_ADDR" +$filesize; "              \
 425                 "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "        \
 426                 "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "       \
 427                 "if test $? -ne 0; then "                               \
 428                         "echo OS PROGRAM FAILED; "                      \
 429                 "else; "                                                \
 430                         "echo OS PROGRAM SUCCEEDED; "                   \
 431                 "fi; "                                                  \
 432         "else; "                                                        \
 433                 "echo OS DOWNLOAD FAILED; "                             \
 434         "fi;"
 435
 436 #define CONFIG_PROG_FDT1                                                \
 437         "$download_cmd $fdtaddr $fdtfile; "                             \
 438         "if test $? -eq 0; then "                                       \
 439                 "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"              \
 440                 "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "      \
 441                 "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "     \
 442                 "if test $? -ne 0; then "                               \
 443                         "echo FDT PROGRAM FAILED; "                     \
 444                 "else; "                                                \
 445                         "echo FDT PROGRAM SUCCEEDED; "                  \
 446                 "fi; "                                                  \
 447         "else; "                                                        \
 448                 "echo FDT DOWNLOAD FAILED; "                            \
 449         "fi;"
 450
 451 #define CONFIG_PROG_FDT2                                                \
 452         "$download_cmd $fdtaddr $fdtfile; "                             \
 453         "if test $? -eq 0; then "                                       \
 454                 "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"              \
 455                 "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "      \
 456                 "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "     \
 457                 "if test $? -ne 0; then "                               \
 458                         "echo FDT PROGRAM FAILED; "                     \
 459                 "else; "                                                \
 460                         "echo FDT PROGRAM SUCCEEDED; "                  \
 461                 "fi; "                                                  \
 462         "else; "                                                        \
 463                 "echo FDT DOWNLOAD FAILED; "                            \
 464         "fi;"
 465
 466 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 467         "autoload=yes\0"                                                \
 468         "download_cmd=tftp\0"                                           \
 469         "console_args=console=ttyS0,115200\0"                           \
 470         "root_args=root=/dev/nfs rw\0"                                  \
 471         "misc_args=ip=on\0"                                             \
 472         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 473         "bootfile=/home/user/file\0"                                    \
 474         "osfile=/home/user/board.uImage\0"                              \
 475         "fdtfile=/home/user/board.dtb\0"                                \
 476         "ubootfile=/home/user/u-boot.bin\0"                             \
 477         "fdtaddr=0x1e00000\0"                                           \
 478         "osaddr=0x1000000\0"                                            \
 479         "loadaddr=0x1000000\0"                                          \
 480         "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
 481         "prog_uboot2="CONFIG_PROG_UBOOT2"\0"                            \
 482         "prog_os1="CONFIG_PROG_OS1"\0"                                  \
 483         "prog_os2="CONFIG_PROG_OS2"\0"                                  \
 484         "prog_fdt1="CONFIG_PROG_FDT1"\0"                                \
 485         "prog_fdt2="CONFIG_PROG_FDT2"\0"                                \
 486         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
 487         "bootcmd_flash1=run set_bootargs; "                             \
 488                 "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
 489         "bootcmd_flash2=run set_bootargs; "                             \
 490                 "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
 491         "bootcmd=run bootcmd_flash1\0"
 492 #endif  /* __CONFIG_H */