include/configs/vexpress_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2011 ARM Limited
   4  * (C) Copyright 2010 Linaro
   5  * Matt Waddel, <matt.waddel@linaro.org>
   6  *
   7  * Configuration for Versatile Express. Parts were derived from other ARM
   8  *   configurations.
   9  */
  10
  11 #ifndef __VEXPRESS_COMMON_H
  12 #define __VEXPRESS_COMMON_H
  13
  14 /*
  15  * Definitions copied from linux kernel:
  16  * arch/arm/mach-vexpress/include/mach/motherboard.h
  17  */
  18 #ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
  19 /* CS register bases for the original memory map. */
  20 #define V2M_PA_CS0              0x40000000
  21 #define V2M_PA_CS1              0x44000000
  22 #define V2M_PA_CS2              0x48000000
  23 #define V2M_PA_CS3              0x4c000000
  24 #define V2M_PA_CS7              0x10000000
  25
  26 #define V2M_PERIPH_OFFSET(x)    (x << 12)
  27 #define V2M_SYSREGS             (V2M_PA_CS7 + V2M_PERIPH_OFFSET(0))
  28 #define V2M_SYSCTL              (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
  29 #define V2M_SERIAL_BUS_PCI      (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
  30
  31 #define V2M_BASE                0x60000000
  32 #elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
  33 /* CS register bases for the extended memory map. */
  34 #define V2M_PA_CS0              0x08000000
  35 #define V2M_PA_CS1              0x0c000000
  36 #define V2M_PA_CS2              0x14000000
  37 #define V2M_PA_CS3              0x18000000
  38 #define V2M_PA_CS7              0x1c000000
  39
  40 #define V2M_PERIPH_OFFSET(x)    (x << 16)
  41 #define V2M_SYSREGS             (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
  42 #define V2M_SYSCTL              (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
  43 #define V2M_SERIAL_BUS_PCI      (V2M_PA_CS7 + V2M_PERIPH_OFFSET(3))
  44
  45 #define V2M_BASE                0x80000000
  46 #endif
  47
  48 /*
  49  * Physical addresses, offset from V2M_PA_CS0-3
  50  */
  51 #define V2M_NOR0                (V2M_PA_CS0)
  52 #define V2M_NOR1                (V2M_PA_CS1)
  53 #define V2M_SRAM                (V2M_PA_CS2)
  54 #define V2M_VIDEO_SRAM          (V2M_PA_CS3 + 0x00000000)
  55 #define V2M_ISP1761             (V2M_PA_CS3 + 0x03000000)
  56
  57 /* Common peripherals relative to CS7. */
  58 #define V2M_AACI                (V2M_PA_CS7 + V2M_PERIPH_OFFSET(4))
  59 #define V2M_MMCI                (V2M_PA_CS7 + V2M_PERIPH_OFFSET(5))
  60 #define V2M_KMI0                (V2M_PA_CS7 + V2M_PERIPH_OFFSET(6))
  61 #define V2M_KMI1                (V2M_PA_CS7 + V2M_PERIPH_OFFSET(7))
  62
  63 #define V2M_UART0               (V2M_PA_CS7 + V2M_PERIPH_OFFSET(9))
  64 #define V2M_UART1               (V2M_PA_CS7 + V2M_PERIPH_OFFSET(10))
  65 #define V2M_UART2               (V2M_PA_CS7 + V2M_PERIPH_OFFSET(11))
  66 #define V2M_UART3               (V2M_PA_CS7 + V2M_PERIPH_OFFSET(12))
  67
  68 #define V2M_WDT                 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(15))
  69
  70 #define V2M_TIMER01             (V2M_PA_CS7 + V2M_PERIPH_OFFSET(17))
  71 #define V2M_TIMER23             (V2M_PA_CS7 + V2M_PERIPH_OFFSET(18))
  72
  73 #define V2M_SERIAL_BUS_DVI      (V2M_PA_CS7 + V2M_PERIPH_OFFSET(22))
  74 #define V2M_RTC                 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(23))
  75
  76 #define V2M_CF                  (V2M_PA_CS7 + V2M_PERIPH_OFFSET(26))
  77
  78 #define V2M_CLCD                (V2M_PA_CS7 + V2M_PERIPH_OFFSET(31))
  79 #define V2M_SIZE_CS7            V2M_PERIPH_OFFSET(32)
  80
  81 /* System register offsets. */
  82 #define V2M_SYS_CFGDATA         (V2M_SYSREGS + 0x0a0)
  83 #define V2M_SYS_CFGCTRL         (V2M_SYSREGS + 0x0a4)
  84 #define V2M_SYS_CFGSTAT         (V2M_SYSREGS + 0x0a8)
  85
  86 /*
  87  * Configuration
  88  */
  89 #define SYS_CFG_START           (1 << 31)
  90 #define SYS_CFG_WRITE           (1 << 30)
  91 #define SYS_CFG_OSC             (1 << 20)
  92 #define SYS_CFG_VOLT            (2 << 20)
  93 #define SYS_CFG_AMP             (3 << 20)
  94 #define SYS_CFG_TEMP            (4 << 20)
  95 #define SYS_CFG_RESET           (5 << 20)
  96 #define SYS_CFG_SCC             (6 << 20)
  97 #define SYS_CFG_MUXFPGA         (7 << 20)
  98 #define SYS_CFG_SHUTDOWN        (8 << 20)
  99 #define SYS_CFG_REBOOT          (9 << 20)
 100 #define SYS_CFG_DVIMODE         (11 << 20)
 101 #define SYS_CFG_POWER           (12 << 20)
 102 #define SYS_CFG_SITE_MB         (0 << 16)
 103 #define SYS_CFG_SITE_DB1        (1 << 16)
 104 #define SYS_CFG_SITE_DB2        (2 << 16)
 105 #define SYS_CFG_STACK(n)        ((n) << 12)
 106
 107 #define SYS_CFG_ERR             (1 << 1)
 108 #define SYS_CFG_COMPLETE        (1 << 0)
 109
 110 /* Board info register */
 111 #define SYS_ID                          V2M_SYSREGS
 112 #define CONFIG_REVISION_TAG             1
 113
 114 #define CONFIG_SYS_MEMTEST_START        V2M_BASE
 115 #define CONFIG_SYS_MEMTEST_END          0x20000000
 116
 117 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs */
 118 #define CONFIG_SETUP_MEMORY_TAGS        1
 119 #define CONFIG_SYS_L2CACHE_OFF          1
 120 #define CONFIG_INITRD_TAG               1
 121
 122 /* Size of malloc() pool */
 123 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 512 * 1024) /* >= 512 KiB */
 124
 125 #define SCTL_BASE                       V2M_SYSCTL
 126 #define VEXPRESS_FLASHPROG_FLVPPEN      (1 << 0)
 127
 128 #define CONFIG_SYS_TIMER_RATE           1000000
 129 #define CONFIG_SYS_TIMER_COUNTER        (V2M_TIMER01 + 0x4)
 130 #define CONFIG_SYS_TIMER_COUNTS_DOWN
 131
 132 /* PL011 Serial Configuration */
 133 #define CONFIG_PL011_CLOCK              24000000
 134 #define CONFIG_PL01x_PORTS              {(void *)CONFIG_SYS_SERIAL0, \
 135                                          (void *)CONFIG_SYS_SERIAL1}
 136
 137 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 138 #define CONFIG_SYS_SERIAL0              V2M_UART0
 139 #define CONFIG_SYS_SERIAL1              V2M_UART1
 140
 141 #define CONFIG_ARM_PL180_MMCI
 142 #define CONFIG_ARM_PL180_MMCI_BASE      V2M_MMCI
 143 #define CONFIG_SYS_MMC_MAX_BLK_COUNT    127
 144 #define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
 145
 146 /* BOOTP options */
 147 #define CONFIG_BOOTP_BOOTFILESIZE
 148
 149 /* Miscellaneous configurable options */
 150 #define CONFIG_SYS_LOAD_ADDR            (V2M_BASE + 0x8000)
 151 #define LINUX_BOOT_PARAM_ADDR           (V2M_BASE + 0x2000)
 152
 153 /* Physical Memory Map */
 154 #define PHYS_SDRAM_1                    (V2M_BASE)      /* SDRAM Bank #1 */
 155 #define PHYS_SDRAM_2                    (((unsigned int)V2M_BASE) + \
 156                                         ((unsigned int)0x20000000))
 157 #define PHYS_SDRAM_1_SIZE               0x20000000      /* 512 MB */
 158 #define PHYS_SDRAM_2_SIZE               0x20000000      /* 512 MB */
 159
 160 /* additions for new relocation code */
 161 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 162 #define CONFIG_SYS_INIT_RAM_SIZE                0x1000
 163 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_SDRAM_BASE + \
 164                                          CONFIG_SYS_INIT_RAM_SIZE - \
 165                                          GENERATED_GBL_DATA_SIZE)
 166 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_GBL_DATA_OFFSET
 167
 168 /* Basic environment settings */
 169 #define BOOT_TARGET_DEVICES(func) \
 170         func(MMC, mmc, 1) \
 171         func(MMC, mmc, 0) \
 172         func(PXE, pxe, na) \
 173         func(DHCP, dhcp, na)
 174 #include <config_distro_bootcmd.h>
 175
 176 #ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
 177 #define CONFIG_PLATFORM_ENV_SETTINGS \
 178                 "loadaddr=0x80008000\0" \
 179                 "ramdisk_addr_r=0x61000000\0" \
 180                 "kernel_addr=0x44100000\0" \
 181                 "ramdisk_addr=0x44800000\0" \
 182                 "maxramdisk=0x1800000\0" \
 183                 "pxefile_addr_r=0x88000000\0" \
 184                 "scriptaddr=0x88000000\0" \
 185                 "kernel_addr_r=0x80008000\0"
 186 #elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
 187 #define CONFIG_PLATFORM_ENV_SETTINGS \
 188                 "loadaddr=0xa0008000\0" \
 189                 "ramdisk_addr_r=0x81000000\0" \
 190                 "kernel_addr=0x0c100000\0" \
 191                 "ramdisk_addr=0x0c800000\0" \
 192                 "maxramdisk=0x1800000\0" \
 193                 "pxefile_addr_r=0xa8000000\0" \
 194                 "scriptaddr=0xa8000000\0" \
 195                 "kernel_addr_r=0xa0008000\0"
 196 #endif
 197 #define CONFIG_EXTRA_ENV_SETTINGS \
 198                 CONFIG_PLATFORM_ENV_SETTINGS \
 199                 BOOTENV \
 200                 "console=ttyAMA0,38400n8\0" \
 201                 "dram=1024M\0" \
 202                 "root=/dev/sda1 rw\0" \
 203                 "mtd=armflash:1M@0x800000(uboot),7M@0x1000000(kernel)," \
 204                         "24M@0x2000000(initrd)\0" \
 205                 "flashargs=setenv bootargs root=${root} console=${console} " \
 206                         "mem=${dram} mtdparts=${mtd} mmci.fmax=190000 " \
 207                         "devtmpfs.mount=0  vmalloc=256M\0" \
 208                 "bootflash=run flashargs; " \
 209                         "cp ${ramdisk_addr} ${ramdisk_addr_r} ${maxramdisk}; " \
 210                         "bootm ${kernel_addr} ${ramdisk_addr_r}\0" \
 211                 "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0"
 212
 213 /* FLASH and environment organization */
 214 #define PHYS_FLASH_SIZE                 0x04000000      /* 64MB */
 215 #define CONFIG_SYS_FLASH_SIZE           0x04000000
 216 #define CONFIG_SYS_MAX_FLASH_BANKS      2
 217 #define CONFIG_SYS_FLASH_BASE0          V2M_NOR0
 218 #define CONFIG_SYS_FLASH_BASE1          V2M_NOR1
 219 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE0
 220
 221 /* Timeout values in ticks */
 222 #define CONFIG_SYS_FLASH_ERASE_TOUT     (2 * CONFIG_SYS_HZ) /* Erase Timeout */
 223 #define CONFIG_SYS_FLASH_WRITE_TOUT     (2 * CONFIG_SYS_HZ) /* Write Timeout */
 224
 225 /* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
 226 #define CONFIG_SYS_MAX_FLASH_SECT       259             /* Max sectors */
 227 #define FLASH_MAX_SECTOR_SIZE           0x00040000      /* 256 KB sectors */
 228
 229 /* Room required on the stack for the environment data */
 230
 231 /*
 232  * Amount of flash used for environment:
 233  * We don't know which end has the small erase blocks so we use the penultimate
 234  * sector location for the environment
 235  */
 236 #define CONFIG_ENV_OVERWRITE            1
 237
 238 /* Store environment at top of flash */
 239 #define CONFIG_SYS_FLASH_EMPTY_INFO     /* flinfo indicates empty blocks */
 240 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE0, \
 241                                           CONFIG_SYS_FLASH_BASE1 }
 242
 243 /* Monitor Command Prompt */
 244 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 245
 246 #endif /* VEXPRESS_COMMON_H */