include/configs/uniphier.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2012-2015 Panasonic Corporation
   4  * Copyright (C) 2015-2016 Socionext Inc.
   5  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
   6  */
   7
   8 /* U-Boot - Common settings for UniPhier Family */
   9
  10 #ifndef __CONFIG_UNIPHIER_COMMON_H__
  11 #define __CONFIG_UNIPHIER_COMMON_H__
  12
  13 #ifndef CONFIG_SPL_BUILD
  14 #include <config_distro_bootcmd.h>
  15
  16 #ifdef CONFIG_CMD_MMC
  17 #define BOOT_TARGET_DEVICE_MMC(func)    func(MMC, mmc, 0) func(MMC, mmc, 1)
  18 #else
  19 #define BOOT_TARGET_DEVICE_MMC(func)
  20 #endif
  21
  22 #ifdef CONFIG_CMD_UBIFS
  23 #define BOOT_TARGET_DEVICE_UBIFS(func)  func(UBIFS, ubifs, 0)
  24 #else
  25 #define BOOT_TARGET_DEVICE_UBIFS(func)
  26 #endif
  27
  28 #ifdef CONFIG_CMD_USB
  29 #define BOOT_TARGET_DEVICE_USB(func)    func(USB, usb, 0)
  30 #else
  31 #define BOOT_TARGET_DEVICE_USB(func)
  32 #endif
  33
  34 #define BOOT_TARGET_DEVICES(func)       \
  35         BOOT_TARGET_DEVICE_MMC(func)    \
  36         BOOT_TARGET_DEVICE_UBIFS(func)  \
  37         BOOT_TARGET_DEVICE_USB(func)
  38 #else
  39 #define BOOTENV
  40 #endif
  41
  42 #define CONFIG_ARMV7_PSCI_1_0
  43
  44 /*-----------------------------------------------------------------------
  45  * MMU and Cache Setting
  46  *----------------------------------------------------------------------*/
  47
  48 /* Comment out the following to enable L1 cache */
  49 /* #define CONFIG_SYS_ICACHE_OFF */
  50 /* #define CONFIG_SYS_DCACHE_OFF */
  51
  52 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  53
  54 #define CONFIG_TIMESTAMP
  55
  56 /* FLASH related */
  57
  58 #define CONFIG_SYS_MAX_FLASH_SECT       256
  59 #define CONFIG_SYS_MONITOR_BASE         0
  60 #define CONFIG_SYS_MONITOR_LEN          0x000d0000      /* 832KB */
  61 #define CONFIG_SYS_FLASH_BASE           0
  62
  63 /*
  64  * flash_toggle does not work for our support card.
  65  * We need to use flash_status_poll.
  66  */
  67 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
  68
  69 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  70
  71 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
  72
  73 /* serial console configuration */
  74
  75 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  76 /* Boot Argument Buffer Size */
  77 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
  78
  79 #define CONFIG_ENV_OFFSET                       0x100000
  80 #define CONFIG_ENV_SIZE                         0x2000
  81 /* #define CONFIG_ENV_OFFSET_REDUND     (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
  82
  83 #define CONFIG_SYS_MMC_ENV_DEV          0
  84 #define CONFIG_SYS_MMC_ENV_PART         1
  85
  86 #if !defined(CONFIG_ARM64)
  87 /* Time clock 1MHz */
  88 #define CONFIG_SYS_TIMER_RATE                   1000000
  89 #endif
  90
  91 #define CONFIG_SYS_MAX_NAND_DEVICE                      1
  92 #define CONFIG_SYS_NAND_ONFI_DETECTION
  93 #define CONFIG_SYS_NAND_REGS_BASE                       0x68100000
  94 #define CONFIG_SYS_NAND_DATA_BASE                       0x68000000
  95 #define CONFIG_SYS_NAND_BAD_BLOCK_POS                   0
  96
  97 /* SD/MMC */
  98 #define CONFIG_SUPPORT_EMMC_BOOT
  99
 100 /* memtest works on */
 101 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 102 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x01000000)
 103
 104 /*
 105  * Network Configuration
 106  */
 107 #define CONFIG_SERVERIP                 192.168.11.1
 108 #define CONFIG_IPADDR                   192.168.11.10
 109 #define CONFIG_GATEWAYIP                192.168.11.1
 110 #define CONFIG_NETMASK                  255.255.255.0
 111
 112 #define CONFIG_LOADADDR                 0x85000000
 113 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 114 #define CONFIG_SYS_BOOTM_LEN            (32 << 20)
 115
 116 #if defined(CONFIG_ARM64)
 117 /* ARM Trusted Firmware */
 118 #define BOOT_IMAGES \
 119         "second_image=unph_bl.bin\0" \
 120         "third_image=fip.bin\0"
 121 #else
 122 #define BOOT_IMAGES \
 123         "second_image=u-boot-spl.bin\0" \
 124         "third_image=u-boot.bin\0"
 125 #endif
 126
 127 #define CONFIG_ROOTPATH                 "/nfs/root/path"
 128 #define CONFIG_NFSBOOTCOMMAND                                           \
 129         "setenv bootargs $bootargs root=/dev/nfs rw "                   \
 130         "nfsroot=$serverip:$rootpath "                                  \
 131         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
 132                 "run __nfsboot"
 133
 134 #ifdef CONFIG_FIT
 135 #define CONFIG_BOOTFILE                 "fitImage"
 136 #define LINUXBOOT_ENV_SETTINGS \
 137         "kernel_addr_r=0x85100000\0" \
 138         "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
 139                 "bootm $kernel_addr_r\0" \
 140         "__nfsboot=run tftpboot\0"
 141 #else
 142 #ifdef CONFIG_ARM64
 143 #define CONFIG_BOOTFILE                 "Image"
 144 #define LINUXBOOT_CMD                   "booti"
 145 #define KERNEL_ADDR_R                   "kernel_addr_r=0x82080000\0"
 146 #else
 147 #define CONFIG_BOOTFILE                 "zImage"
 148 #define LINUXBOOT_CMD                   "bootz"
 149 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80208000\0"
 150 #endif
 151 #define LINUXBOOT_ENV_SETTINGS \
 152         "fdt_addr_r=0x85100000\0" \
 153         KERNEL_ADDR_R \
 154         "ramdisk_addr_r=0x86000000\0" \
 155         "ramdisk_file=rootfs.cpio.gz\0" \
 156         "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
 157                 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
 158         "tftpboot=tftpboot $kernel_addr_r $bootfile && " \
 159                 "tftpboot $fdt_addr_r $fdtfile &&" \
 160                 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
 161                 "setenv ramdisk_addr_r $ramdisk_addr_r:$filesize &&" \
 162                 "run boot_common\0" \
 163         "__nfsboot=tftpboot $kernel_addr_load $bootfile && " \
 164                 "tftpboot $fdt_addr_r $fdtfile &&" \
 165                 "setenv ramdisk_addr_r - &&" \
 166                 "run boot_common\0"
 167 #endif
 168
 169 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 170         "netdev=eth0\0"                                         \
 171         "initrd_high=0xffffffffffffffff\0"                      \
 172         "script=boot.scr\0" \
 173         "scriptaddr=0x85000000\0"                               \
 174         "nor_base=0x42000000\0"                                 \
 175         "emmcboot=mmcsetn && run bootcmd_mmc${mmc_first_dev}\0" \
 176         "nandboot=run bootcmd_ubifs0\0" \
 177         "norboot=run tftpboot\0" \
 178         "usbboot=run bootcmd_usb0\0" \
 179         "emmcscript=setenv devtype mmc && " \
 180                 "mmcsetn && " \
 181                 "setenv devnum ${mmc_first_dev} && " \
 182                 "run loadscript_fat\0" \
 183         "nandscript=echo Running ${script} from ubi ... && " \
 184                 "ubi part UBI && " \
 185                 "ubifsmount ubi0:boot && " \
 186                 "ubifsload ${loadaddr} ${script} && " \
 187                 "source\0" \
 188         "norscript=echo Running ${script} from tftp ... && " \
 189                 "tftpboot ${script} &&" \
 190                 "source\0" \
 191         "usbscript=usb start && " \
 192                 "setenv devtype usb && " \
 193                 "setenv devnum 0 && " \
 194                 "run loadscript_fat\0" \
 195         "loadscript_fat=echo Running ${script} from ${devtype}${devnum} ... && " \
 196                 "load ${devtype} ${devnum}:1 ${loadaddr} ${script} && " \
 197                 "source\0" \
 198         "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"    \
 199                 "tftpboot $tmp_addr $second_image && " \
 200                 "setexpr tmp_addr $nor_base + 0x70000 && " \
 201                 "tftpboot $tmp_addr $third_image\0" \
 202         "emmcupdate=mmcsetn &&"                                 \
 203                 "mmc dev $mmc_first_dev &&"                     \
 204                 "mmc partconf $mmc_first_dev 0 1 1 &&"          \
 205                 "tftpboot $second_image && " \
 206                 "mmc write $loadaddr 0 100 && " \
 207                 "tftpboot $third_image && " \
 208                 "mmc write $loadaddr 100 f00\0" \
 209         "nandupdate=nand erase 0 0x00100000 &&"                 \
 210                 "tftpboot $second_image && " \
 211                 "nand write $loadaddr 0 0x00020000 && " \
 212                 "tftpboot $third_image && " \
 213                 "nand write $loadaddr 0x00020000 0x001e0000\0" \
 214         "usbupdate=usb start &&" \
 215                 "tftpboot $second_image && " \
 216                 "usb write $loadaddr 0 100 && " \
 217                 "tftpboot $third_image && " \
 218                 "usb write $loadaddr 100 f00\0" \
 219         BOOT_IMAGES \
 220         LINUXBOOT_ENV_SETTINGS \
 221         BOOTENV
 222
 223 #define CONFIG_SYS_BOOTMAPSZ                    0x20000000
 224
 225 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 226
 227 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE)
 228
 229 /* only for SPL */
 230 #if defined(CONFIG_ARCH_UNIPHIER_LD4) || \
 231         defined(CONFIG_ARCH_UNIPHIER_SLD8)
 232 #endif
 233
 234 #define CONFIG_SPL_STACK                (0x00200000)
 235
 236 #define CONFIG_SYS_NAND_U_BOOT_OFFS             0x20000
 237
 238 /* subtract sizeof(struct image_header) */
 239 #define CONFIG_SYS_UBOOT_BASE                   (0x130000 - 0x40)
 240
 241 #define CONFIG_SPL_TARGET                       "u-boot-with-spl.bin"
 242 #define CONFIG_SPL_MAX_FOOTPRINT                0x10000
 243 #define CONFIG_SPL_MAX_SIZE                     0x10000
 244 #define CONFIG_SPL_BSS_MAX_SIZE                 0x2000
 245
 246 #define CONFIG_SPL_PAD_TO                       0x20000
 247
 248 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */