Merge branch 'master' of git://git.denx.de/u-boot-video
[oweals/u-boot.git] / include / configs / uniphier.h
1 /*
2  * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 /* U-Boot - Common settings for UniPhier Family */
8
9 #ifndef __CONFIG_UNIPHIER_COMMON_H__
10 #define __CONFIG_UNIPHIER_COMMON_H__
11
12 #define CONFIG_I2C_EEPROM
13 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
14
15 #define CONFIG_SMC911X
16
17 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */
18 #define CONFIG_SMC911X_BASE     0
19 #define CONFIG_SMC911X_32_BIT
20
21 /*-----------------------------------------------------------------------
22  * MMU and Cache Setting
23  *----------------------------------------------------------------------*/
24
25 /* Comment out the following to enable L1 cache */
26 /* #define CONFIG_SYS_ICACHE_OFF */
27 /* #define CONFIG_SYS_DCACHE_OFF */
28
29 #define CONFIG_SYS_CACHELINE_SIZE       32
30
31 /* Comment out the following to disable L2 cache */
32 #define CONFIG_UNIPHIER_L2CACHE_ON
33
34 #define CONFIG_DISPLAY_CPUINFO
35 #define CONFIG_DISPLAY_BOARDINFO
36 #define CONFIG_MISC_INIT_F
37 #define CONFIG_BOARD_EARLY_INIT_F
38 #define CONFIG_BOARD_EARLY_INIT_R
39 #define CONFIG_BOARD_LATE_INIT
40
41 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
42
43 #define CONFIG_TIMESTAMP
44
45 /* FLASH related */
46 #define CONFIG_MTD_DEVICE
47
48 /*
49  * uncomment the following to disable FLASH related code.
50  */
51 /* #define CONFIG_SYS_NO_FLASH */
52
53 #define CONFIG_FLASH_CFI_DRIVER
54 #define CONFIG_SYS_FLASH_CFI
55
56 #define CONFIG_SYS_MAX_FLASH_SECT       256
57 #define CONFIG_SYS_MONITOR_BASE         0
58 #define CONFIG_SYS_MONITOR_LEN          0x00080000      /* 512KB */
59 #define CONFIG_SYS_FLASH_BASE           0
60
61 /*
62  * flash_toggle does not work for out supoort card.
63  * We need to use flash_status_poll.
64  */
65 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
66
67 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
68
69 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
70
71 /* serial console configuration */
72 #define CONFIG_BAUDRATE                 115200
73
74 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64)
75 #define CONFIG_USE_ARCH_MEMSET
76 #define CONFIG_USE_ARCH_MEMCPY
77 #endif
78
79 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
80
81 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
82 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
83 /* Print Buffer Size */
84 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
85 #define CONFIG_SYS_MAXARGS              16      /* max number of command */
86 /* Boot Argument Buffer Size */
87 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
88
89 #define CONFIG_CONS_INDEX               1
90
91 /* #define CONFIG_ENV_IS_NOWHERE */
92 /* #define CONFIG_ENV_IS_IN_NAND */
93 #define CONFIG_ENV_IS_IN_MMC
94 #define CONFIG_ENV_OFFSET                       0x80000
95 #define CONFIG_ENV_SIZE                         0x2000
96 /* #define CONFIG_ENV_OFFSET_REDUND     (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
97
98 #define CONFIG_SYS_MMC_ENV_DEV          0
99 #define CONFIG_SYS_MMC_ENV_PART         1
100
101 #ifdef CONFIG_ARM64
102 #define CONFIG_ARMV8_MULTIENTRY
103 #define CPU_RELEASE_ADDR                        0x80000100
104 #define COUNTER_FREQUENCY                       50000000
105 #define CONFIG_GICV3
106 #define GICD_BASE                               0x5fe00000
107 #define GICR_BASE                               0x5fe80000
108 #else
109 /* Time clock 1MHz */
110 #define CONFIG_SYS_TIMER_RATE                   1000000
111 #endif
112
113
114 #define CONFIG_SYS_MAX_NAND_DEVICE                      1
115 #define CONFIG_SYS_NAND_MAX_CHIPS                       2
116 #define CONFIG_SYS_NAND_ONFI_DETECTION
117
118 #define CONFIG_NAND_DENALI_ECC_SIZE                     1024
119
120 #ifdef CONFIG_ARCH_UNIPHIER_SLD3
121 #define CONFIG_SYS_NAND_REGS_BASE                       0xf8100000
122 #define CONFIG_SYS_NAND_DATA_BASE                       0xf8000000
123 #else
124 #define CONFIG_SYS_NAND_REGS_BASE                       0x68100000
125 #define CONFIG_SYS_NAND_DATA_BASE                       0x68000000
126 #endif
127
128 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_DATA_BASE + 0x10)
129
130 #define CONFIG_SYS_NAND_USE_FLASH_BBT
131 #define CONFIG_SYS_NAND_BAD_BLOCK_POS                   0
132
133 /* USB */
134 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
135 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      4
136 #define CONFIG_FAT_WRITE
137 #define CONFIG_DOS_PARTITION
138
139 /* SD/MMC */
140 #define CONFIG_SUPPORT_EMMC_BOOT
141 #define CONFIG_GENERIC_MMC
142
143 /* memtest works on */
144 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
145 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x01000000)
146
147 #define CONFIG_BOOTDELAY                        3
148 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
149
150 /*
151  * Network Configuration
152  */
153 #define CONFIG_SERVERIP                 192.168.11.1
154 #define CONFIG_IPADDR                   192.168.11.10
155 #define CONFIG_GATEWAYIP                192.168.11.1
156 #define CONFIG_NETMASK                  255.255.255.0
157
158 #define CONFIG_LOADADDR                 0x84000000
159 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
160
161 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
162
163 #define CONFIG_BOOTCOMMAND              "run $bootmode"
164
165 #define CONFIG_ROOTPATH                 "/nfs/root/path"
166 #define CONFIG_NFSBOOTCOMMAND                                           \
167         "setenv bootargs $bootargs root=/dev/nfs rw "                   \
168         "nfsroot=$serverip:$rootpath "                                  \
169         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
170                 "run __nfsboot"
171
172 #ifdef CONFIG_FIT
173 #define CONFIG_BOOTFILE                 "fitImage"
174 #define LINUXBOOT_ENV_SETTINGS \
175         "fit_addr=0x00100000\0" \
176         "fit_addr_r=0x84100000\0" \
177         "fit_size=0x00f00000\0" \
178         "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
179                 "bootm $fit_addr\0" \
180         "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
181                 "bootm $fit_addr_r\0" \
182         "tftpboot=tftpboot $fit_addr_r $bootfile &&" \
183                 "bootm $fit_addr_r\0" \
184         "__nfsboot=run tftpboot\0"
185 #else
186 #ifdef CONFIG_ARM64
187 #define CONFIG_CMD_BOOTI
188 #define CONFIG_BOOTFILE                 "Image"
189 #define LINUXBOOT_CMD                   "booti"
190 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80080000\0"
191 #define KERNEL_SIZE                     "kernel_size=0x00c00000\0"
192 #define RAMDISK_ADDR                    "ramdisk_addr=0x00e00000\0"
193 #else
194 #define CONFIG_BOOTFILE                 "zImage"
195 #define LINUXBOOT_CMD                   "bootz"
196 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80208000\0"
197 #define KERNEL_SIZE                     "kernel_size=0x00800000\0"
198 #define RAMDISK_ADDR                    "ramdisk_addr=0x00a00000\0"
199 #endif
200 #define LINUXBOOT_ENV_SETTINGS \
201         "fdt_addr=0x00100000\0" \
202         "fdt_addr_r=0x84100000\0" \
203         "fdt_size=0x00008000\0" \
204         "kernel_addr=0x00200000\0" \
205         KERNEL_ADDR_R \
206         KERNEL_SIZE \
207         RAMDISK_ADDR \
208         "ramdisk_addr_r=0x84a00000\0" \
209         "ramdisk_size=0x00600000\0" \
210         "ramdisk_file=rootfs.cpio.uboot\0" \
211         "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
212                 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
213         "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
214                 "setexpr kernel_size $kernel_size / 4 &&" \
215                 "cp $kernel_addr $kernel_addr_r $kernel_size &&" \
216                 "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
217                 "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
218                 "run boot_common\0" \
219         "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
220                 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
221                 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
222                 "run boot_common\0" \
223         "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
224                 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
225                 "tftpboot $fdt_addr_r $fdt_file &&" \
226                 "run boot_common\0" \
227         "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \
228                 "tftpboot $fdt_addr_r $fdt_file &&" \
229                 "tftpboot $fdt_addr_r $fdt_file &&" \
230                 "setenv ramdisk_addr_r - &&" \
231                 "run boot_common\0"
232 #endif
233
234 #define CONFIG_EXTRA_ENV_SETTINGS                               \
235         "netdev=eth0\0"                                         \
236         "verify=n\0"                                            \
237         "nor_base=0x42000000\0"                                 \
238         "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"    \
239                 "tftpboot $tmp_addr u-boot-spl.bin &&"          \
240                 "setexpr tmp_addr $nor_base + 0x60000 &&"       \
241                 "tftpboot $tmp_addr u-boot.bin\0"               \
242         "emmcupdate=mmcsetn &&"                                 \
243                 "mmc partconf $mmc_first_dev 0 1 1 &&"          \
244                 "mmc erase 0 800 &&"                            \
245                 "tftpboot u-boot-spl.bin &&"                    \
246                 "mmc write $loadaddr 0 80 &&"                   \
247                 "tftpboot u-boot.bin &&"                        \
248                 "mmc write $loadaddr 80 780\0"                  \
249         "nandupdate=nand erase 0 0x00100000 &&"                 \
250                 "tftpboot u-boot-spl.bin &&"                    \
251                 "nand write $loadaddr 0 0x00010000 &&"          \
252                 "tftpboot u-boot.bin &&"                        \
253                 "nand write $loadaddr 0x00010000 0x000f0000\0"  \
254         LINUXBOOT_ENV_SETTINGS
255
256 #define CONFIG_SYS_BOOTMAPSZ                    0x20000000
257
258 #define CONFIG_SYS_SDRAM_BASE           0x80000000
259 #define CONFIG_NR_DRAM_BANKS            2
260 /* for LD20; the last 64 byte is used for dynamic DDR PHY training */
261 #define CONFIG_SYS_MEM_TOP_HIDE         64
262
263 #if defined(CONFIG_ARM64)
264 #define CONFIG_SPL_TEXT_BASE            0x30000000
265 #elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \
266         defined(CONFIG_ARCH_UNIPHIER_LD4) || \
267         defined(CONFIG_ARCH_UNIPHIER_SLD8)
268 #define CONFIG_SPL_TEXT_BASE            0x00040000
269 #else
270 #define CONFIG_SPL_TEXT_BASE            0x00100000
271 #endif
272
273 #if defined(CONFIG_ARCH_UNIPHIER_LD20)
274 #define CONFIG_SPL_STACK                (0x3001c000)
275 #else
276 #define CONFIG_SPL_STACK                (0x00100000)
277 #endif
278 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE)
279
280 #define CONFIG_PANIC_HANG
281
282 #define CONFIG_SPL_FRAMEWORK
283 #define CONFIG_SPL_SERIAL_SUPPORT
284 #define CONFIG_SPL_NOR_SUPPORT
285 #ifndef CONFIG_ARM64
286 #define CONFIG_SPL_NAND_SUPPORT
287 #define CONFIG_SPL_MMC_SUPPORT
288 #endif
289
290 #define CONFIG_SPL_LIBCOMMON_SUPPORT    /* for mem_malloc_init */
291 #define CONFIG_SPL_LIBGENERIC_SUPPORT
292
293 #define CONFIG_SPL_BOARD_INIT
294
295 #define CONFIG_SYS_NAND_U_BOOT_OFFS             0x10000
296
297 /* subtract sizeof(struct image_header) */
298 #define CONFIG_SYS_UBOOT_BASE                   (0x60000 - 0x40)
299 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80
300
301 #define CONFIG_SPL_TARGET                       "u-boot-with-spl.bin"
302 #define CONFIG_SPL_MAX_FOOTPRINT                0x10000
303 #define CONFIG_SPL_MAX_SIZE                     0x10000
304 #define CONFIG_SPL_BSS_START_ADDR               0x30016000
305 #define CONFIG_SPL_BSS_MAX_SIZE                 0x2000
306
307 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */