include/configs/trats2.h

   1 /*
   2  * Copyright (C) 2013 Samsung Electronics
   3  * Sanghee Kim <sh0130.kim@samsung.com>
   4  * Piotr Wilczek <p.wilczek@samsung.com>
   5  *
   6  * Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*
  15  * High Level Configuration Options
  16  * (easy to change)
  17  */
  18 #define CONFIG_SAMSUNG          /* in a SAMSUNG core */
  19 #define CONFIG_S5P              /* which is in a S5P Family */
  20 #define CONFIG_EXYNOS4          /* which is in a EXYNOS4XXX */
  21 #define CONFIG_TIZEN            /* TIZEN lib */
  22
  23 #include <asm/arch/cpu.h>               /* get chip and board defs */
  24
  25 #define CONFIG_ARCH_CPU_INIT
  26 #define CONFIG_DISPLAY_CPUINFO
  27 #define CONFIG_DISPLAY_BOARDINFO
  28
  29 #define CONFIG_SKIP_LOWLEVEL_INIT
  30
  31 #define CONFIG_SYS_CACHELINE_SIZE       32
  32
  33 #define CONFIG_SYS_L2CACHE_OFF
  34 #ifndef CONFIG_SYS_L2CACHE_OFF
  35 #define CONFIG_SYS_L2_PL310
  36 #define CONFIG_SYS_PL310_BASE   0x10502000
  37 #endif
  38
  39 #define CONFIG_NR_DRAM_BANKS    4
  40 #define PHYS_SDRAM_1            0x40000000      /* LDDDR2 DMC 0 */
  41 #define PHYS_SDRAM_1_SIZE       (256 << 20)     /* 256 MB in CS 0 */
  42 #define PHYS_SDRAM_2            0x50000000      /* LPDDR2 DMC 1 */
  43 #define PHYS_SDRAM_2_SIZE       (256 << 20)     /* 256 MB in CS 0 */
  44 #define PHYS_SDRAM_3            0x60000000      /* LPDDR2 DMC 1 */
  45 #define PHYS_SDRAM_3_SIZE       (256 << 20)     /* 256 MB in CS 0 */
  46 #define PHYS_SDRAM_4            0x70000000      /* LPDDR2 DMC 1 */
  47 #define PHYS_SDRAM_4_SIZE       (256 << 20)     /* 256 MB in CS 0 */
  48 #define PHYS_SDRAM_END          0x80000000
  49
  50 #define CONFIG_SYS_MEM_TOP_HIDE         (1 << 20)       /* ram console */
  51
  52 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
  53 #define CONFIG_SYS_TEXT_BASE            0x78100000
  54
  55 #define CONFIG_SYS_CLK_FREQ             24000000
  56
  57 #define CONFIG_SETUP_MEMORY_TAGS
  58 #define CONFIG_CMDLINE_TAG
  59 #define CONFIG_REVISION_TAG
  60
  61 /* MACH_TYPE_TRATS2 */
  62 #define MACH_TYPE_TRATS2                3765
  63 #define CONFIG_MACH_TYPE                MACH_TYPE_TRATS2
  64
  65 #define CONFIG_DISPLAY_CPUINFO
  66
  67 #include <asm/sizes.h>
  68 /* Size of malloc() pool */
  69 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (80 * SZ_1M))
  70
  71 /* select serial console configuration */
  72 #define CONFIG_SERIAL2
  73
  74 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser    */
  75 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
  76
  77 #define CONFIG_CMDLINE_EDITING
  78
  79 #define CONFIG_BAUDRATE                 115200
  80
  81 /* It should define before config_cmd_default.h */
  82 #define CONFIG_SYS_NO_FLASH
  83
  84 /***********************************************************
  85  * Command definition
  86  ***********************************************************/
  87 #include <config_cmd_default.h>
  88
  89 #undef CONFIG_CMD_ECHO
  90 #undef CONFIG_CMD_FPGA
  91 #undef CONFIG_CMD_FLASH
  92 #undef CONFIG_CMD_IMLS
  93 #undef CONFIG_CMD_NAND
  94 #undef CONFIG_CMD_MISC
  95 #undef CONFIG_CMD_NFS
  96 #undef CONFIG_CMD_SOURCE
  97 #undef CONFIG_CMD_XIMG
  98 #define CONFIG_CMD_CACHE
  99 #define CONFIG_CMD_I2C
 100 #define CONFIG_CMD_MMC
 101 #define CONFIG_CMD_DFU
 102 #define CONFIG_CMD_GPT
 103 #define CONFIG_CMD_PMIC
 104
 105 #define CONFIG_BOOTDELAY        3
 106 #define CONFIG_ZERO_BOOTDELAY_CHECK
 107
 108 #define CONFIG_CMD_FAT
 109 #define CONFIG_FAT_WRITE
 110
 111 /* EXT4 */
 112 #define CONFIG_CMD_EXT4
 113 #define CONFIG_CMD_EXT4_WRITE
 114
 115 /* USB Composite download gadget - g_dnl */
 116 #define CONFIG_USBDOWNLOAD_GADGET
 117 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
 118 #define CONFIG_DFU_FUNCTION
 119 #define CONFIG_DFU_MMC
 120
 121 /* TIZEN THOR downloader support */
 122 #define CONFIG_CMD_THOR_DOWNLOAD
 123 #define CONFIG_THOR_FUNCTION
 124
 125 /* USB Samsung's IDs */
 126 #define CONFIG_G_DNL_VENDOR_NUM 0x04E8
 127 #define CONFIG_G_DNL_PRODUCT_NUM 0x6601
 128 #define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
 129 #define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
 130 #define CONFIG_G_DNL_MANUFACTURER "Samsung"
 131
 132 /* To use the TFTPBOOT over USB, Please enable the CONFIG_CMD_NET */
 133 #undef CONFIG_CMD_NET
 134
 135 /* MMC */
 136 #define CONFIG_GENERIC_MMC
 137 #define CONFIG_MMC
 138 #define CONFIG_S5P_SDHCI
 139 #define CONFIG_SDHCI
 140 #define CONFIG_MMC_SDMA
 141 #define CONFIG_MMC_DEFAULT_DEV  0
 142
 143 /* PWM */
 144 #define CONFIG_PWM
 145
 146 #define CONFIG_BOOTARGS         "Please use defined boot"
 147 #define CONFIG_BOOTCOMMAND      "run mmcboot"
 148 #define CONFIG_DEFAULT_CONSOLE  "console=ttySAC2,115200n8\0"
 149
 150 #define CONFIG_ENV_OVERWRITE
 151 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 152 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 153
 154 /* Tizen - partitions definitions */
 155 #define PARTS_CSA               "csa"
 156 #define PARTS_BOOT              "boot"
 157 #define PARTS_MODEM             "modem"
 158 #define PARTS_CSC               "csc"
 159 #define PARTS_ROOT              "platform"
 160 #define PARTS_DATA              "data"
 161 #define PARTS_UMS               "ums"
 162
 163 #define PARTS_DEFAULT \
 164         "uuid_disk=${uuid_gpt_disk};" \
 165         "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
 166         "name="PARTS_BOOT",size=64MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
 167         "name="PARTS_MODEM",size=100MiB,uuid=${uuid_gpt_"PARTS_MODEM"};" \
 168         "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
 169         "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
 170         "name="PARTS_DATA",size=512MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
 171         "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
 172
 173 #define CONFIG_DFU_ALT \
 174         "u-boot mmc 80 800;" \
 175         "uImage ext4 0 2;" \
 176         "exynos4412-trats2.dtb ext4 0 2;" \
 177         ""PARTS_BOOT" part 0 2;" \
 178         ""PARTS_ROOT" part 0 5;" \
 179         ""PARTS_DATA" part 0 6;" \
 180         ""PARTS_UMS" part 0 7\0"
 181
 182 #define CONFIG_EXTRA_ENV_SETTINGS \
 183         "bootk=" \
 184                 "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
 185         "updatemmc=" \
 186                 "mmc boot 0 1 1 1; mmc write 0x42008000 0 0x200;" \
 187                 "mmc boot 0 1 1 0\0" \
 188         "updatebackup=" \
 189                 "mmc boot 0 1 1 2; mmc write 0x42100000 0 0x200;" \
 190                 " mmc boot 0 1 1 0\0" \
 191         "updatebootb=" \
 192                 "mmc read 0x51000000 0x80 0x200; run updatebackup\0" \
 193         "updateuboot=" \
 194                 "mmc write 0x50000000 0x80 0x400\0" \
 195         "mmcboot=" \
 196                 "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 197                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
 198                 "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
 199         "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
 200         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
 201         "verify=n\0" \
 202         "rootfstype=ext4\0" \
 203         "console=" CONFIG_DEFAULT_CONSOLE \
 204         "kernelname=uImage\0" \
 205         "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
 206                 "${kernelname}\0" \
 207         "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
 208                 "${fdtfile}\0" \
 209         "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
 210         "mmcbootpart=2\0" \
 211         "mmcrootpart=5\0" \
 212         "opts=always_resume=1\0" \
 213         "partitions=" PARTS_DEFAULT \
 214         "dfu_alt_info=" CONFIG_DFU_ALT \
 215         "uartpath=ap\0" \
 216         "usbpath=ap\0" \
 217         "consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
 218         "consoleoff=set console console=ram; save; reset\0" \
 219         "spladdr=0x40000100\0" \
 220         "splsize=0x200\0" \
 221         "splfile=falcon.bin\0" \
 222         "spl_export=" \
 223                    "setexpr spl_imgsize ${splsize} + 8 ;" \
 224                    "setenv spl_imgsize 0x${spl_imgsize};" \
 225                    "setexpr spl_imgaddr ${spladdr} - 8 ;" \
 226                    "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
 227                    "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
 228                    "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 229                    "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
 230                    "spl export atags 0x40007FC0;" \
 231                    "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
 232                    "mw.l ${spl_addr_tmp} ${splsize};" \
 233                    "ext4write mmc ${mmcdev}:${mmcbootpart}" \
 234                    " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
 235                    "setenv spl_imgsize;" \
 236                    "setenv spl_imgaddr;" \
 237                    "setenv spl_addr_tmp;\0" \
 238         "fdtaddr=40800000\0" \
 239         "fdtfile=exynos4412-trats2.dtb\0"
 240
 241 /*
 242  * Miscellaneous configurable options
 243  */
 244 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 245 #define CONFIG_SYS_PROMPT       "Trats2 # "     /* Monitor Command Prompt */
 246 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 247 #define CONFIG_SYS_PBSIZE       384             /* Print Buffer Size */
 248 #define CONFIG_SYS_MAXARGS      32              /* max number of command args */
 249
 250 /* Boot Argument Buffer Size */
 251 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 252
 253 /* memtest works on */
 254 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 255 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5000000)
 256 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x4800000)
 257
 258 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_LOAD_ADDR \
 259                                         - GENERATED_GBL_DATA_SIZE)
 260
 261 /* valid baudrates */
 262 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 263
 264 #define CONFIG_SYS_MONITOR_BASE         0x00000000
 265
 266 /*-----------------------------------------------------------------------
 267  * FLASH and environment organization
 268  */
 269
 270 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 271
 272 #define CONFIG_ENV_IS_IN_MMC
 273 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
 274 #define CONFIG_ENV_SIZE                 4096
 275 #define CONFIG_ENV_OFFSET               ((32 - 4) << 10) /* 32KiB - 4KiB */
 276 #define CONFIG_EFI_PARTITION
 277 #define CONFIG_PARTITION_UUIDS
 278
 279 #define CONFIG_MISC_INIT_R
 280 #define CONFIG_BOARD_EARLY_INIT_F
 281
 282 /* I2C */
 283 #include <asm/arch/gpio.h>
 284
 285 #define CONFIG_SYS_I2C
 286 #define CONFIG_SYS_I2C_S3C24X0
 287 #define CONFIG_SYS_I2C_S3C24X0_SPEED    100000
 288 #define CONFIG_SYS_I2C_S3C24X0_SLAVE    0
 289 #define CONFIG_MAX_I2C_NUM              8
 290 #define CONFIG_SYS_I2C_SOFT
 291 #define CONFIG_SYS_I2C_SOFT_SPEED       50000
 292 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x00
 293 #define I2C_SOFT_DECLARATIONS2
 294 #define CONFIG_SYS_I2C_SOFT_SPEED_2     50000
 295 #define CONFIG_SYS_I2C_SOFT_SLAVE_2     0x00
 296 #define CONFIG_SOFT_I2C_READ_REPEATED_START
 297 #define CONFIG_SYS_I2C_INIT_BOARD
 298
 299 #ifndef __ASSEMBLY__
 300 int get_soft_i2c_scl_pin(void);
 301 int get_soft_i2c_sda_pin(void);
 302 #endif
 303 #define CONFIG_SOFT_I2C_GPIO_SCL        get_soft_i2c_scl_pin()
 304 #define CONFIG_SOFT_I2C_GPIO_SDA        get_soft_i2c_sda_pin()
 305
 306 /* POWER */
 307 #define CONFIG_POWER
 308 #define CONFIG_POWER_I2C
 309 #define CONFIG_POWER_MAX77686
 310 #define CONFIG_POWER_PMIC_MAX77693
 311 #define CONFIG_POWER_MUIC_MAX77693
 312 #define CONFIG_POWER_FG_MAX77693
 313 #define CONFIG_POWER_BATTERY_TRATS2
 314 #define CONFIG_USB_GADGET
 315 #define CONFIG_USB_GADGET_S3C_UDC_OTG
 316 #define CONFIG_USB_GADGET_DUALSPEED
 317 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 318 #define CONFIG_USB_CABLE_CHECK
 319
 320 /* LCD */
 321 #define CONFIG_EXYNOS_FB
 322 #define CONFIG_LCD
 323 #define CONFIG_CMD_BMP
 324 #define CONFIG_BMP_32BPP
 325 #define CONFIG_FB_ADDR          0x52504000
 326 #define CONFIG_S6E8AX0
 327 #define CONFIG_EXYNOS_MIPI_DSIM
 328 #define CONFIG_VIDEO_BMP_GZIP
 329 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 250 * 4) + (1 << 12))
 330
 331 #define CONFIG_CMD_USB_MASS_STORAGE
 332 #define CONFIG_USB_GADGET_MASS_STORAGE
 333
 334 /* Pass open firmware flat tree */
 335 #define CONFIG_OF_LIBFDT    1
 336
 337 #endif  /* __CONFIG_H */