include/configs/tao3530.h

   1 /*
   2  * Configuration settings for the TechNexion TAO-3530 SOM
   3  * equipped on Thunder baseboard.
   4  *
   5  * Edward Lin <linuxfae@technexion.com>
   6  * Tapani Utriainen <linuxfae@technexion.com>
   7  *
   8  * Copyright (C) 2013 Stefan Roese <sr@denx.de>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 /*
  17  * High Level Configuration Options
  18  */
  19
  20 #include <asm/arch/cpu.h>               /* get chip and board defs */
  21 #include <asm/arch/omap.h>
  22
  23 /* Clock Defines */
  24 #define V_OSCK                  26000000        /* Clock output from T2 */
  25 #define V_SCLK                  (V_OSCK >> 1)
  26
  27 #define CONFIG_MISC_INIT_R
  28
  29 #define CONFIG_CMDLINE_TAG
  30 #define CONFIG_SETUP_MEMORY_TAGS
  31 #define CONFIG_INITRD_TAG
  32 #define CONFIG_REVISION_TAG
  33
  34 /*
  35  * Size of malloc() pool
  36  */
  37 #define CONFIG_SYS_MALLOC_LEN           (4 << 20)
  38 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB sector */
  39
  40 /*
  41  * Hardware drivers
  42  */
  43
  44 /*
  45  * NS16550 Configuration
  46  */
  47 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  48
  49 #define CONFIG_SYS_NS16550_SERIAL
  50 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  51 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  52
  53 /*
  54  * select serial console configuration
  55  */
  56 #define CONFIG_CONS_INDEX               3
  57 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  58
  59 /* allow to overwrite serial and ethaddr */
  60 #define CONFIG_ENV_OVERWRITE
  61
  62 /* commands to include */
  63 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  64
  65 #define CONFIG_SYS_I2C
  66 #define CONFIG_I2C_MULTI_BUS
  67
  68 /*
  69  * TWL4030
  70  */
  71 #define CONFIG_TWL4030_LED
  72
  73 /*
  74  * Board NAND Info.
  75  */
  76 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
  77                                                         /* to access nand */
  78 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
  79                                                         /* to access nand at */
  80                                                         /* CS0 */
  81
  82 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND */
  83                                                         /* devices */
  84 /* Environment information */
  85
  86 #define CONFIG_EXTRA_ENV_SETTINGS \
  87         "loadaddr=0x82000000\0" \
  88         "console=ttyO2,115200n8\0" \
  89         "mpurate=600\0" \
  90         "dvi_mode=omapfb.mode=dvi:1280x720-24@60\0" \
  91         "tv_mode=omapfb.mode=tv:ntsc\0" \
  92         "video_mode=omapdss.def_disp=lcd vram=6M omapfb.vram=0:2M,1:2M,2:2M\0" \
  93         "lcd_mode=omapfb.mode=lcd:800x480@60 \0" \
  94         "extra_options= \0" \
  95         "mmcdev=0\0" \
  96         "mmcroot=/dev/mmcblk0p2 rw\0" \
  97         "mmcrootfstype=ext3 rootwait\0" \
  98         "nandroot=ubi0:rootfs ubi.mtd=4\0" \
  99         "nandrootfstype=ubifs\0" \
 100         "mmcargs=setenv bootargs console=${console} " \
 101                 "mpurate=${mpurate} " \
 102                 "${video_mode} " \
 103                 "root=${mmcroot} " \
 104                 "rootfstype=${mmcrootfstype} " \
 105                 "${extra_options}\0" \
 106         "nandargs=setenv bootargs console=${console} " \
 107                 "mpurate=${mpurate} " \
 108                 "${video_mode} " \
 109                 "${network_setting} " \
 110                 "root=${nandroot} " \
 111                 "rootfstype=${nandrootfstype} "\
 112                 "${extra_options}\0" \
 113         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 114         "bootscript=echo Running bootscript from mmc ...; " \
 115                 "source ${loadaddr}\0" \
 116         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 117         "mmcboot=echo Booting from mmc ...; " \
 118                 "run mmcargs; " \
 119                 "bootm ${loadaddr}\0" \
 120         "nandboot=echo Booting from nand ...; " \
 121                 "run nandargs; " \
 122                 "nand read ${loadaddr} 280000 400000; " \
 123                 "bootm ${loadaddr}\0" \
 124
 125 #define CONFIG_BOOTCOMMAND \
 126         "if mmc rescan ${mmcdev}; then " \
 127                 "if run loadbootscript; then " \
 128                         "run bootscript; " \
 129                 "else " \
 130                         "if run loaduimage; then " \
 131                                 "run mmcboot; " \
 132                         "else run nandboot; " \
 133                         "fi; " \
 134                 "fi; " \
 135         "else run nandboot; fi"
 136
 137 /*
 138  * Miscellaneous configurable options
 139  */
 140 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 141
 142 /* turn on command-line edit/hist/auto */
 143 #define CONFIG_CMDLINE_EDITING
 144 #define CONFIG_AUTO_COMPLETE
 145
 146 #define CONFIG_SYS_ALT_MEMTEST          1
 147 #define CONFIG_SYS_MEMTEST_START        (0x82000000)            /* memtest */
 148                                                                 /* defaults */
 149 #define CONFIG_SYS_MEMTEST_END          (0x83FFFFFF)            /* 64MB */
 150 #define CONFIG_SYS_MEMTEST_SCRATCH      (0x81000000)    /* dummy address */
 151
 152 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0)     /* default */
 153                                                         /* load address */
 154
 155 /*
 156  * OMAP3 has 12 GP timers, they can be driven by the system clock
 157  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 158  * This rate is divided by a local divisor.
 159  */
 160 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 161 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 162
 163 /*
 164  * Physical Memory Map
 165  */
 166 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
 167 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 168 #define PHYS_SDRAM_1_SIZE       (32 << 20)      /* at least 32 MiB */
 169 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
 170
 171 /*
 172  * FLASH and environment organization
 173  */
 174
 175 /* **** PISMO SUPPORT *** */
 176 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 177 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 178
 179 /* Monitor at start of flash */
 180 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 181 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 182
 183 #define ONENAND_ENV_OFFSET              0x260000 /* environment starts here */
 184
 185 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)
 186 #define CONFIG_ENV_OFFSET               0x260000
 187 #define CONFIG_ENV_ADDR                 CONFIG_ENV_OFFSET
 188
 189 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 190 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 191 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 192 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 193                                          CONFIG_SYS_INIT_RAM_SIZE - \
 194                                          GENERATED_GBL_DATA_SIZE)
 195
 196 /*
 197  * USB
 198  *
 199  * Currently only EHCI is enabled, the MUSB OTG controller
 200  * is not enabled.
 201  */
 202
 203 /* USB EHCI */
 204 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO        162
 205
 206 /* Defines for SPL */
 207 #define CONFIG_SPL_FRAMEWORK
 208
 209 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 210 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
 211
 212 #define CONFIG_SPL_NAND_BASE
 213 #define CONFIG_SPL_NAND_DRIVERS
 214 #define CONFIG_SPL_NAND_ECC
 215
 216 /* NAND boot config */
 217 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 218 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 219 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 220 #define CONFIG_SYS_NAND_OOBSIZE         64
 221 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 222 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 223 /*
 224  * Use the ECC/OOB layout from omap_gpmc.h that matches your chip:
 225  * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT
 226  */
 227 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
 228                                          10, 11, 12, 13 }
 229 #define CONFIG_SYS_NAND_ECCSIZE         512
 230 #define CONFIG_SYS_NAND_ECCBYTES        3
 231 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 232
 233 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 234 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 235
 236 #define CONFIG_SPL_TEXT_BASE            0x40200800
 237 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
 238                                          CONFIG_SPL_TEXT_BASE)
 239
 240 /*
 241  * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
 242  * older x-loader implementations. And move the BSS area so that it
 243  * doesn't overlap with TEXT_BASE.
 244  */
 245 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 246 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 247
 248 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 249 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 250
 251 #endif /* __CONFIG_H */