include/configs/socfpga_common.h

   1 /*
   2  * Copyright (C) 2012 Altera Corporation <www.altera.com>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6 #ifndef __CONFIG_SOCFPGA_COMMON_H__
   7 #define __CONFIG_SOCFPGA_COMMON_H__
   8
   9 /* Virtual target or real hardware */
  10 #undef CONFIG_SOCFPGA_VIRTUAL_TARGET
  11
  12 /*
  13  * High level configuration
  14  */
  15 #define CONFIG_DISPLAY_BOARDINFO_LATE
  16 #define CONFIG_CLOCKS
  17
  18 #define CONFIG_SYS_BOOTMAPSZ            (64 * 1024 * 1024)
  19
  20 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  21
  22 /* add target to build it automatically upon "make" */
  23 #define CONFIG_BUILD_TARGET             "u-boot-with-spl.sfp"
  24
  25 /*
  26  * Memory configurations
  27  */
  28 #define CONFIG_NR_DRAM_BANKS            1
  29 #define PHYS_SDRAM_1                    0x0
  30 #define CONFIG_SYS_MALLOC_LEN           (64 * 1024 * 1024)
  31 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_1
  32 #define CONFIG_SYS_MEMTEST_END          PHYS_SDRAM_1_SIZE
  33 #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
  34 #define CONFIG_SYS_INIT_RAM_ADDR        0xFFFF0000
  35 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000
  36 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
  37 #define CONFIG_SYS_INIT_RAM_ADDR        0xFFE00000
  38 #define CONFIG_SYS_INIT_RAM_SIZE        0x40000 /* 256KB */
  39 #endif
  40 #define CONFIG_SYS_INIT_SP_OFFSET               \
  41         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  42 #define CONFIG_SYS_INIT_SP_ADDR                 \
  43         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  44
  45 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  46
  47 /*
  48  * U-Boot general configurations
  49  */
  50 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  51                                                 /* Print buffer size */
  52 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  53 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  54                                                 /* Boot argument buffer size */
  55
  56 #ifndef CONFIG_SYS_HOSTNAME
  57 #define CONFIG_SYS_HOSTNAME     CONFIG_SYS_BOARD
  58 #endif
  59
  60 /*
  61  * Cache
  62  */
  63 #define CONFIG_SYS_L2_PL310
  64 #define CONFIG_SYS_PL310_BASE           SOCFPGA_MPUL2_ADDRESS
  65
  66 /*
  67  * EPCS/EPCQx1 Serial Flash Controller
  68  */
  69 #ifdef CONFIG_ALTERA_SPI
  70 #define CONFIG_SF_DEFAULT_SPEED         30000000
  71 /*
  72  * The base address is configurable in QSys, each board must specify the
  73  * base address based on it's particular FPGA configuration. Please note
  74  * that the address here is incremented by  0x400  from the Base address
  75  * selected in QSys, since the SPI registers are at offset +0x400.
  76  * #define CONFIG_SYS_SPI_BASE          0xff240400
  77  */
  78 #endif
  79
  80 /*
  81  * Ethernet on SoC (EMAC)
  82  */
  83 #if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
  84 #define CONFIG_DW_ALTDESCRIPTOR
  85 #define CONFIG_MII
  86 #endif
  87
  88 /*
  89  * FPGA Driver
  90  */
  91 #ifdef CONFIG_CMD_FPGA
  92 #define CONFIG_FPGA_COUNT               1
  93 #endif
  94
  95 /*
  96  * L4 OSC1 Timer 0
  97  */
  98 /* This timer uses eosc1, whose clock frequency is fixed at any condition. */
  99 #define CONFIG_SYS_TIMERBASE            SOCFPGA_OSC1TIMER0_ADDRESS
 100 #define CONFIG_SYS_TIMER_COUNTS_DOWN
 101 #define CONFIG_SYS_TIMER_COUNTER        (CONFIG_SYS_TIMERBASE + 0x4)
 102 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 103 #define CONFIG_SYS_TIMER_RATE           2400000
 104 #else
 105 #define CONFIG_SYS_TIMER_RATE           25000000
 106 #endif
 107
 108 /*
 109  * L4 Watchdog
 110  */
 111 #ifdef CONFIG_HW_WATCHDOG
 112 #define CONFIG_DESIGNWARE_WATCHDOG
 113 #define CONFIG_DW_WDT_BASE              SOCFPGA_L4WD0_ADDRESS
 114 #define CONFIG_DW_WDT_CLOCK_KHZ         25000
 115 #define CONFIG_WATCHDOG_TIMEOUT_MSECS   30000
 116 #endif
 117
 118 /*
 119  * MMC Driver
 120  */
 121 #ifdef CONFIG_CMD_MMC
 122 #define CONFIG_BOUNCE_BUFFER
 123 /* FIXME */
 124 /* using smaller max blk cnt to avoid flooding the limited stack we have */
 125 #define CONFIG_SYS_MMC_MAX_BLK_COUNT    256     /* FIXME -- SPL only? */
 126 #endif
 127
 128 /*
 129  * NAND Support
 130  */
 131 #ifdef CONFIG_NAND_DENALI
 132 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 133 #define CONFIG_SYS_NAND_ONFI_DETECTION
 134 #define CONFIG_SYS_NAND_REGS_BASE       SOCFPGA_NANDREGS_ADDRESS
 135 #define CONFIG_SYS_NAND_DATA_BASE       SOCFPGA_NANDDATA_ADDRESS
 136 #endif
 137
 138 /*
 139  * I2C support
 140  */
 141 #define CONFIG_SYS_I2C
 142 #define CONFIG_SYS_I2C_BASE             SOCFPGA_I2C0_ADDRESS
 143 #define CONFIG_SYS_I2C_BASE1            SOCFPGA_I2C1_ADDRESS
 144 #define CONFIG_SYS_I2C_BASE2            SOCFPGA_I2C2_ADDRESS
 145 #define CONFIG_SYS_I2C_BASE3            SOCFPGA_I2C3_ADDRESS
 146 /* Using standard mode which the speed up to 100Kb/s */
 147 #define CONFIG_SYS_I2C_SPEED            100000
 148 #define CONFIG_SYS_I2C_SPEED1           100000
 149 #define CONFIG_SYS_I2C_SPEED2           100000
 150 #define CONFIG_SYS_I2C_SPEED3           100000
 151 /* Address of device when used as slave */
 152 #define CONFIG_SYS_I2C_SLAVE            0x02
 153 #define CONFIG_SYS_I2C_SLAVE1           0x02
 154 #define CONFIG_SYS_I2C_SLAVE2           0x02
 155 #define CONFIG_SYS_I2C_SLAVE3           0x02
 156 #ifndef __ASSEMBLY__
 157 /* Clock supplied to I2C controller in unit of MHz */
 158 unsigned int cm_get_l4_sp_clk_hz(void);
 159 #define IC_CLK                          (cm_get_l4_sp_clk_hz() / 1000000)
 160 #endif
 161
 162 /*
 163  * QSPI support
 164  */
 165 /* Enable multiple SPI NOR flash manufacturers */
 166 #ifndef CONFIG_SPL_BUILD
 167 #define CONFIG_SPI_FLASH_MTD
 168 #define CONFIG_MTD_DEVICE
 169 #define CONFIG_MTD_PARTITIONS
 170 #endif
 171 /* QSPI reference clock */
 172 #ifndef __ASSEMBLY__
 173 unsigned int cm_get_qspi_controller_clk_hz(void);
 174 #define CONFIG_CQSPI_REF_CLK            cm_get_qspi_controller_clk_hz()
 175 #endif
 176
 177 /*
 178  * Designware SPI support
 179  */
 180
 181 /*
 182  * Serial Driver
 183  */
 184 #define CONFIG_SYS_NS16550_SERIAL
 185 #define CONFIG_SYS_NS16550_REG_SIZE     -4
 186 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 187 #define CONFIG_SYS_NS16550_CLK          1000000
 188 #elif defined(CONFIG_TARGET_SOCFPGA_GEN5)
 189 #define CONFIG_SYS_NS16550_COM1         SOCFPGA_UART0_ADDRESS
 190 #define CONFIG_SYS_NS16550_CLK          100000000
 191 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
 192 #define CONFIG_SYS_NS16550_COM1        SOCFPGA_UART1_ADDRESS
 193 #define CONFIG_SYS_NS16550_CLK          50000000
 194 #endif
 195 #define CONFIG_CONS_INDEX               1
 196
 197 /*
 198  * USB
 199  */
 200
 201 /*
 202  * USB Gadget (DFU, UMS)
 203  */
 204 #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
 205 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    (16 * 1024 * 1024)
 206 #define DFU_DEFAULT_POLL_TIMEOUT        300
 207
 208 /* USB IDs */
 209 #define CONFIG_G_DNL_UMS_VENDOR_NUM     0x0525
 210 #define CONFIG_G_DNL_UMS_PRODUCT_NUM    0xA4A5
 211 #endif
 212
 213 /*
 214  * U-Boot environment
 215  */
 216 #if !defined(CONFIG_ENV_SIZE)
 217 #define CONFIG_ENV_SIZE                 (8 * 1024)
 218 #endif
 219
 220 /* Environment for SDMMC boot */
 221 #if defined(CONFIG_ENV_IS_IN_MMC) && !defined(CONFIG_ENV_OFFSET)
 222 #define CONFIG_SYS_MMC_ENV_DEV          0 /* device 0 */
 223 #define CONFIG_ENV_OFFSET               (34 * 512) /* just after the GPT */
 224 #endif
 225
 226 /* Environment for QSPI boot */
 227 #if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_OFFSET)
 228 #define CONFIG_ENV_OFFSET               0x00100000
 229 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 230 #endif
 231
 232 /*
 233  * mtd partitioning for serial NOR flash
 234  *
 235  * device nor0 <ff705000.spi.0>, # parts = 6
 236  * #: name                size            offset          mask_flags
 237  * 0: u-boot              0x00100000      0x00000000      0
 238  * 1: env1                0x00040000      0x00100000      0
 239  * 2: env2                0x00040000      0x00140000      0
 240  * 3: UBI                 0x03e80000      0x00180000      0
 241  * 4: boot                0x00e80000      0x00180000      0
 242  * 5: rootfs              0x01000000      0x01000000      0
 243  *
 244  */
 245
 246 /*
 247  * SPL
 248  *
 249  * SRAM Memory layout:
 250  *
 251  * 0xFFFF_0000 ...... Start of SRAM
 252  * 0xFFFF_xxxx ...... Top of stack (grows down)
 253  * 0xFFFF_yyyy ...... Malloc area
 254  * 0xFFFF_zzzz ...... Global Data
 255  * 0xFFFF_FF00 ...... End of SRAM
 256  */
 257 #define CONFIG_SPL_TEXT_BASE            CONFIG_SYS_INIT_RAM_ADDR
 258 #define CONFIG_SPL_MAX_SIZE             CONFIG_SYS_INIT_RAM_SIZE
 259
 260 /* SPL SDMMC boot support */
 261 #ifdef CONFIG_SPL_MMC_SUPPORT
 262 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
 263 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot-dtb.img"
 264 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 265 #endif
 266 #else
 267 #ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
 268 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION      1
 269 #endif
 270 #endif
 271
 272 /* SPL QSPI boot support */
 273 #ifdef CONFIG_SPL_SPI_SUPPORT
 274 #define CONFIG_SPL_SPI_LOAD
 275 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x40000
 276 #endif
 277
 278 /* SPL NAND boot support */
 279 #ifdef CONFIG_SPL_NAND_SUPPORT
 280 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 281 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 282 #endif
 283
 284 /*
 285  * Stack setup
 286  */
 287 #define CONFIG_SPL_STACK                CONFIG_SYS_INIT_SP_ADDR
 288
 289 /* Extra Environment */
 290 #ifndef CONFIG_SPL_BUILD
 291 #include <config_distro_defaults.h>
 292
 293 #ifdef CONFIG_CMD_DHCP
 294 #define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
 295 #else
 296 #define BOOT_TARGET_DEVICES_DHCP(func)
 297 #endif
 298
 299 #ifdef CONFIG_CMD_PXE
 300 #define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
 301 #else
 302 #define BOOT_TARGET_DEVICES_PXE(func)
 303 #endif
 304
 305 #ifdef CONFIG_CMD_MMC
 306 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
 307 #else
 308 #define BOOT_TARGET_DEVICES_MMC(func)
 309 #endif
 310
 311 #define BOOT_TARGET_DEVICES(func) \
 312         BOOT_TARGET_DEVICES_MMC(func) \
 313         BOOT_TARGET_DEVICES_PXE(func) \
 314         BOOT_TARGET_DEVICES_DHCP(func)
 315
 316 #include <config_distro_bootcmd.h>
 317
 318 #ifndef CONFIG_EXTRA_ENV_SETTINGS
 319 #define CONFIG_EXTRA_ENV_SETTINGS \
 320         "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
 321         "bootm_size=0xa000000\0" \
 322         "kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \
 323         "fdt_addr_r=0x02000000\0" \
 324         "scriptaddr=0x02100000\0" \
 325         "pxefile_addr_r=0x02200000\0" \
 326         "ramdisk_addr_r=0x02300000\0" \
 327         BOOTENV
 328
 329 #endif
 330 #endif
 331
 332 #endif  /* __CONFIG_SOCFPGA_COMMON_H__ */