mx35: adjust default environment for flea3 board
[oweals/u-boot.git] / include / configs / rk3399_common.h
1 /*
2  * (C) Copyright 2016 Rockchip Electronics Co., Ltd
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 #ifndef __CONFIG_RK3399_COMMON_H
8 #define __CONFIG_RK3399_COMMON_H
9
10 #include "rockchip-common.h"
11
12 #define CONFIG_SYS_NO_FLASH
13 #define CONFIG_NR_DRAM_BANKS            1
14 #define CONFIG_ENV_SIZE                 0x2000
15 #define CONFIG_SYS_MAXARGS              16
16 #define CONFIG_BAUDRATE                 1500000
17 #define CONFIG_SYS_MALLOC_LEN           (32 << 20)
18 #define CONFIG_SYS_CBSIZE               1024
19 #define CONFIG_SKIP_LOWLEVEL_INIT
20
21 #define CONFIG_SYS_NS16550_MEM32
22
23 #define CONFIG_SYS_TEXT_BASE            0x00200000
24 #define CONFIG_SYS_INIT_SP_ADDR         0x00300000
25 #define CONFIG_SYS_LOAD_ADDR            0x00800800
26
27 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* 64M */
28
29 /* MMC/SD IP block */
30 #define CONFIG_MMC
31 #define CONFIG_GENERIC_MMC
32 #define CONFIG_DWMMC
33 #define CONFIG_SDHCI
34 #define CONFIG_BOUNCE_BUFFER
35 #define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ  200000000
36
37 #define CONFIG_SUPPORT_VFAT
38 #define CONFIG_FS_FAT
39 #define CONFIG_FAT_WRITE
40 #define CONFIG_FS_EXT4
41 #define CONFIG_CMD_PART
42
43 /* RAW SD card / eMMC locations. */
44 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 256
45 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (128 << 10)
46
47 /* FAT sd card locations. */
48 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
49 #define CONFIG_SYS_SDRAM_BASE           0
50 #define CONFIG_NR_DRAM_BANKS            1
51
52 #define CONFIG_SPI_FLASH
53 #define CONFIG_SPI
54 #define CONFIG_SF_DEFAULT_SPEED 20000000
55
56 #ifndef CONFIG_SPL_BUILD
57
58 #define ENV_MEM_LAYOUT_SETTINGS \
59         "scriptaddr=0x00000000\0" \
60         "pxefile_addr_r=0x00100000\0" \
61         "fdt_addr_r=0x01f00000\0" \
62         "kernel_addr_r=0x02000000\0" \
63         "ramdisk_addr_r=0x04000000\0"
64
65 #include <config_distro_bootcmd.h>
66 #define CONFIG_EXTRA_ENV_SETTINGS \
67         ENV_MEM_LAYOUT_SETTINGS \
68         "partitions=" PARTS_DEFAULT \
69         BOOTENV
70
71 #endif
72
73 /* enable usb config for usb ether */
74 #define CONFIG_USB_HOST_ETHER
75
76 #define CONFIG_USB_ETHER_ASIX
77 #define CONFIG_USB_ETHER_ASIX88179
78 #define CONFIG_USB_ETHER_MCS7830
79 #define CONFIG_USB_ETHER_SMSC95XX
80 #define CONFIG_USB_ETHER_RTL8152
81
82 /* rockchip xhci host driver */
83 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
84
85 #endif